North American Quarry News July 2011 by Lee Publications

Volume 17 Number 4

JULY 2011

Screening Equipment Recycling Equipment Crushers Screens Magnets Conveyors

Mine Drilling Services fills the need for reliable drilling support

by Jon M. Casey

One advantage of drilling with a Gill Beetle drill rig is its agility in difficult locations. With the unit's air compressor located on a lower bench, the drill operator is able to work on a small area above. For Randy May, owning a blast hole drilling company has been a dream come true. Randy, coowner of the recently formed Mine Drilling Services of Clearfield, PA, has a long history working with drillers and blasters in the quarry industry. It was not however, until he formed a partnership with long time business associate and friend, Grant Wise, that Randy was able to set out to serve regional customers with their blast hole drilling needs in Pennsylvania, Maryland, New York and surrounding areas. “I had been involved with drilling in some form for most of my career,” said May during a recent visit to the Glenn O. Hawbaker, Inc. Hagermans Run Aggregate Facility near Williamsport, PA. We were visiting this particular quarry because MDS’s new Model 300C Gill Rock Beetle® was busy drilling more than two dozen blast holes atop a bluff there. The rock is scheduled to be mined for aggregates that will primarily be used to support the Marcellus Shale Gas

Guy Kitchen bores a hole atop a bench at Glenn O. Hawbaker's Hagerman's Run quarry.

Work is progressing nicely on the recent relocation of Hagerman's Run's processing plant. The entire plant was moved a short distance at this site to allow for additional mining of rock close to the plant. drilling industry in the area. overseeing blast drilling for a short period, Orica was “In the past, I had worked with York Drilling, DNX looking to divest itself of its drilling assets. Drilling, a division of DYNO Nobel, and I was the “That was when I approached Grant Wise, to drilling and blasting superintendent for Pennsy discuss his becoming a partner in ownership of the Supply. More recently, I worked as a sales represen- new company,” said May. “Grant owns J. Roy’s, Inc., tative for Orica Mining Services in their blasting divi- a construction drilling and blasting company from sion. There, I worked closely with the drillers who Denver, PA. We developed a working relationship over prepared the quarry sites for Orica’s blasters.” the years, and because MDS was going to solely serve May said that it was from this close relationship the quarry industry, and because Grant’s company with Orica that he realized that he might be able to primarily served the construction industry, we agreed start his own drilling company. Orica had acquired that we could work together to serve both industries the D.C. Guelich Explosives Co., a drilling and blast- successfully. Since both businesses specialize in ing company, in north central Pennsylvania, but after

MDS 4

Page 3 • North American Quarry News • July 2011

Mine Drilling Services fills the need for reliable drilling support

July 2011 • North American Quarry News • Page 4

MDS from 3 blast hole drilling, if MDS has the need for additional drilling equipment during especially busy times, it is an added benefit to have J. Roy’s, Inc. available to help us out if they have extra available rigs.” May said that in addition to the newly purchased Beetle, MDS also has five additional Gill Rock Beetles and three smaller pneumatic top hammer drills. “We acquired the drilling assets from Orica in 2010,” he said. “We negotiated to hire 10 employees to do the drilling as well. Most of our people have from 10 to 30 years drilling experience, so it was a good fit from the very beginning.” “Our people are the best at what they do,” he noted. “If it wasn’t for them, we wouldn’t have been able to start right up doing the kind of business that we are currently doing. Drillers like Guy Kitchen and John Hudson, who are working this job today, are the reason that things have gone as smoothly as they have. Guy has more than 30 years experience and John, more than 10. They know the customer’s needs, they know the quarry and blasting industry and they know safety. That is an excellent combination. They all work well together to get the job done.” “We are the exclusive drillers for Orica,” noted May. “I take care of the sales work and scheduling, and because of the relationships that I had developed with several of the quarry producers over the years, we were able to work with them to provide their blast hole drilling needs. We have been able to not only keep all of our crews busy since we started business officially on October 11, 2010, but we have picked up new accounts as well. We have hired two new people recently, and will be looking to add a couple more in the coming months.” May said that he prefers using the Gill Rock Beetle over truck mounted drill rigs because the Beetle, with its maneuverability and separate air compressor, allows MDS drillers to drill in places where other larger equipment would be prohibited from accessing. “The articulating arm on our new Beetle makes it easy for Guy to move from one bore hole to the next one,” said May. “In a year’s time, an experienced driller like Guy can do more drill footage with a drill like this one. May said that MDS works out of their headquarters Clearfield, PA facility, from which they serve quarries throughout the area. The shop formerly housed the drilling equipment and crews when it was under Orica ownership. “We kept the same facility because our crews all live in the area,” he said. “That makes it easier on them.” For more information on Mine Drilling Services, contact Randy May at 717-5992028 or at ramay5143@aol.com.

A peek at the drill rig's Atlas Copco drill bit.

John Hudson guides the air hose as drill operator Guy Kitchen moves the Gill Beetle to the next drill site.

Gill Rock Drills offer customers distinct advantages by Jon M. Casey During our recent visit with Randy May, it didn’t take long to realize that his company’s reliance on Gill Rock Drills was born of experience with aggregate blasting drilling. Randy’s appreciation for the agility and maneuverability of his company’s new Model 312 Gill Beetle® Drill, was evident as we watched Guy Kitchen and John Hudson drilling blast holes atop a new section of rock that was due for mining in the coming days. He noted that because of the drill’s smaller size, MDS is able to serve their customers more effectively without sacrificing drilling production. “With the remote air compressor positioned on a lower bench, we are able to take the Beetle up to the higher level and do drilling that other, larger drills could not access,” said May. “We were able to move this rig around to the top of the bench to an area where a truck mounted drill could not safely go. As you can see, Guy

and John can position the drill safely and do the work up here where a larger rig would not be able to go.” Eric Crosson, vice president of sales for Gill Rock Drill Co., Inc. agrees. “We have developed new technologies on our latest model the 312 Beetle Drill that makes them better equipped to drill rock on rougher terrain,” he said. “That helps equip our customers to be more productive, and at the same time, our equipment is safer to use than ever.” Crosson recalled that Gill Rock Drill Co., Inc. has been servicing the MDS fleet for a long time. “Our history with Randy and Grant Wise goes back a number of years,” he said. “We originally worked with the D.C. Guelich Explosives Co. and then with Orica’s drilling division, before Randy and Grant bought out their assets. We also have worked with J. Roy’s, Inc. in Bowmansville, PA, Grant Wise’s drilling operation; so we have a long working relation-

ship with them.” “That is one of the advantages of owing a Gill Rock Drill,” said Crosson. “We can jump at a moment’s notice to serve our customers if they have a need for parts or service for their equipment. We manufacture all of our parts for the drill rigs at our manufacturing plant in Lebanon, PA, so we stock a complete inventory of whatever a customer might need for his Beetle Drill. Because we have and experienced service team, we also are able to not only repair equipment when it is not working properly, but we can also train our customers’ service staff to maintain and service their drill rigs to help keep them running smoothly for many years. Similarly, we are able to train the drillers on how to operate the latest models of our drills.” For more information on Gill Rock Drill Company, Inc. contact them at 800-334-3117 or visit their Web site at www.gillrockdrill.com.

BRIDGEPORT, NJ — Godwin Pumps, manufacturer of the Dri-Prime® automatic self-priming, dry running pump, is pleased to announce the opening of its newest branch in Poway, CA, serving the San Diego area. Sharing a space with Flygt at 13350 Gregg St. No. 108, the sister companies are positioned to meet customers’ temporary and permanent pumping needs in San Diego’s very diverse market, which includes marine, municipal and construction applications, as well as military applications. Godwin will service this area through a 5,000square-foot shop equipped with two overhead cranes to 10 tons, six truck docks and four work stations. Godwin’s Poway branch manager, Nate

Warren says, “We are very excited to be a part of the San Diego construction community. In the past six months, we have created some strong new relationships throughout the region. Working with Flygt in the community has been very beneficial, and we look forward to the continued support and capability to expand our network even more.” Godwin Pumps is a direct, wholly owned subsidiary of ITT Corporation. Godwin Pumps (www.godwinpumps.com) maintains a fleet of over 6,000 portable rental pumps and 3,200 pieces of related equipment for use in dewatering in construction, mining and quarrying; in drinking water supply; and in wastewater bypasses in municipal, industrial and environmental markets.

The Godwin Dri-Prime pump features fully automatic self-priming to 28foot per 8.5 m dry running and solids handling capabilities and is complemented by a wide range and variety of electric submersible SubPrime®, hydraulic submersible Heidra® and gasoline-powered WetPrime pumps. Godwin Pumps also offers customized sales and service training to distributors. Godwin Pumps, DriPrime, Sub-Prime, Heidra, the phrase Think Orange. Think Godwin. Great Pumps. Great People, and the color orange for pumps are registered trademarks and DBS and PrimeGuard are trademarks of Godwin Pumps of America, Inc. All other marks belong to their respective holders.

Correction In our June 2011 feature article, ‘Clayton Companies lead the way mining premium quality sand,’ we incorrectly spelled the company name of the McLanahan Corporation classifying

equipment. We regret any confusion or misunderstanding that we may have caused the McLanahan Corporation for this oversight. Jon M. Casey, Editor

TRADE SHOW OPPORTUNITIES • KEYSTONE FARM SHOW •

January 3, 4, 5, 2012 • Tues. 9-4, Wed. 9-4 & Thurs. 9-3 York Fairgrounds • York, PA

• VIRGINIA FARM SHOW • Jan. 19, 20 & 21, 2012 • Thurs. 9-4, Fri. 9-4 & Sat. 9-3 Augusta Expoland • Fishersville, VA

• BIG IRON EXPO • February 8 & 9, 2012 • Wed. 10-7 & Thurs. 9-4 Eastern States Exposition • West Springfield, MA

• MATERIAL HANDLING & INDUSTRIAL EQUIPMENT EXPO • February 8 & 9, 2012 • Wed. 10-7 & Thurs. 9-4 Eastern States Exposition • West Springfield, MA

• EMPIRE STATE FRUIT & VEG EXPO • Jan. 24, 25 & 26 2012 Oncenter Convention Center • Syracuse, NY

• HARD HAT EXPO • March 7 & 8, 2012 • Wed. 10-7 & Thurs. 9-4 New York State Fairgrounds • Syracuse, NY

• MATERIAL HANDLING & INDUSTRIAL EQUIPMENT EXPO • March 7 & 8, 2012 • Wed. 10-7 & Thurs. 9-4 New York State Fairgrounds • Syracuse, NY FOR MORE INFORMATION ON HOW TO EXHIBIT AT OR ATTEND ANY OF THESE SHOWS

CALL 800-218-5586 www.leetradeshows.com • mwhite@leepub.com

Page 5 • North American Quarry News • July 2011

Godwin Pumps announces branch opening in Poway, CA

July 2011 • North American Quarry News • Page 6

TABLE OF CONTENTS FEATURE STORIES Mine Drilling Services fills the need for reliable drilling support. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-4

by Jon M. Casey The Road Less Traveled . . . . . . . . . . . . . . . . . . . . . . . 7

by Kay Sever People On The Move . . . . . . . . . . . . . . . . . . . . . . . . . 11 ‘From Roofs to Roads,’ Tidewater Green opens new doors to the marketplace . . . . . . . . . . . . . . . . . . 12-13

by Jon M. Casey Superior unveils first ever primary and secondary scraper with one mounting point . . . . . . . . . . . . . . 15 Safety Solutions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17 Classifieds . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18-19 Over 400 hard hat workers rally at foot of U.S. Capital Nor th American Quarr y News is published monthly by Leee Publications, P.O. Box 121, 6113 St. Hwy. 5, Palatine Bridg e , NY 13428 Standard Class Postag e Paid at Palatine Bridg e , NY 13428 POSTMASTER: Send address chang es to: Lee Publications, P.O. Box 121, Palatine Bridg e , NY 13428. Publisher . . . . . . . . . . . . . . . . . . . . . . . . . . Frederick W. Lee Vice President, Sales & Marketing . . . . . . . Janet Lee Stanley Vice President, Production . . . . . . . . . . . . . . . . . . . Mark Lee Vice President and General Manag er . . . . . . . . . Bruce Button Editor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Jon M. Casey Editorial Assistant . . . . . . . . . . . . . . . . . . . . . . Kathleen Lee Comptroller . . . . . . . . . . . . . . . . . . . . . . . . . . . Rober t Moyer Production Coordinator . . . . . . . . . . . . . . . . . Jessica Mackay Pag e Composition . . . . . . . . . . . . . . . . . . . . . . Alison Swar tz Shop Foreman . . . . . . . . . . . . . . . . . . . . . . . . . Harr y Delong Subscriptions/Circulation . . . . . . . . . . . . . . . . 888-596-5329 MAIN OFFICE: Palatine Bridg e , NY 13428 518-673-3237 - FAX# 518-673-2381 Matt Stanley (Sales Manag er) . . . . . . . . . . . . . . 518-673-0135 Lyndsay Button. . . . . . . . . . . . . . . . . . . . . . . . . 518-673-0115 Wendell Jennings . . . . . . . . . . . . . . . . . . . . . . . 518-673-0114 Tina Krieg er . . . . . . . . . . . . . . . . . . . . . . . . . . . 518-673-0108 Jan Andrews . . . . . . . . . . . . . . . . . . . . . . . . . . . 518-673-0110 REGIONAL SALES OFFICES Scott Duffy (NH, VT, ME) . . . . . . . . . . . . . . . . . . Ian Hitchener (Southern New England). . . . . . . . Wanda Luck (Carolinas) . . . . . . . . . . . . . . . . . . Mark Sheldon (Ohio, W. Pennylvania) . . . . . . . . . Penny Lloyd (Eastern VA) . . . . . . . . . . . . . . . . . NATIONAL TRADE SHOW SALES Ken Maring, Trade Show Manag er 888-355-5080 or 518-673-0103

802-484-7240 518-210-2066 336-416-6198 814-587-2519 540-295-5808

Nor th American Quarr y News will not knowingly accept or publish adver tising which is fraudulent or misleading in nature. The publisher reser ves the sole right to edit, revise or reject any and all adver tising - with or without cause being assigned - which, in his judgement, is unwholesome or contrar y to the interest of this publication. Nor th American Quarr y News assumes no financial responsibility for typographical errors in adver tisements; but, if at fault, will reprint that por tion of the ad in which the error appears. Publisher accepts no financial responsibility for ads which do not appear due to any circumstance.

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20 Thompson Pump’s 2011 Pumpology School . . . . . 22 Cover Caption: Drill operator Guy Kitchen and Randy May, MDS co-owner, find the new Gill Beetle® 330 to be an ideal drill rig for quarry drilling.

ADVERTISE! All advertising materials must be submitted on or before the advertising deadlines listed below. North American Quarry News is published monthly. In the event that copy changes are not received by the ad deadline, contracted advertiser’s copy the previous issue will be inserted.

August 2011

October 2011

December 2011

September 2011

November 2011

January 2012

Advertising Deadline: June 29, 2011 Advertising Deadline: July 27, 2011

Advertising Deadline: Sept 7, 2011 Advertising Deadline: Oct. 5, 2011

Advertising Deadline: Nov. 2, 2011 Advertising Deadline: Dec. 2, 2011

CONTRIBUTE! North American Quarry News is circulated to 20,000 mine and quarry owners and operators by Lee Publications, Inc. Designed to bring news to those involved in the aggregate industry from the mines and quarries to the end users, North American Quarry News includes new products, technology updates, association news, people in the news, company profiles, and current events. We invite you to send us your news! Send your news by mail, fax, or e-mail to:

Jon M. Casey, Editor North American Quarry News 6113 State Highway 5 Palatine Bridge, NY 13428 FAX: 518-673-2699 E-MAIL: jcasey@leepub.com Questions? Call 717-258-6775

Stories on quarries from coast to coast will be featured! If you’d like us to do a story on your operation, call the editor to set up an interview!

Does your site have work groups where several people are required to “manage the work” without supervisor oversight at every minute? Are there multiple supervisors that jointly share responsibility for overseeing the work of more than one crew? Do you oversee such a group or work area? Then this article is for you. Having a team of people manage their own work and do a good job of it sounds like management “utopia.” The truth is that their success is totally dependent on: 1. Management tools and processes that help the group understand one plan for the work; 2. The training process for bringing new members into that workgroup, and; 3. Expectations for promotion/progression attached to teamwork required for success of the team.

Without these three elements in place, 1. All success hinges on the work ethic and commitment of the individuals in that group; 2. Intellectual property of the company (i.e., the body of knowledge required to “manage the work”) will be lost when key members of the group retire. Closer supervision of such a group will not compensate for this loss. Work groups that truly behave as tight knit teams in the workplace develop some unique dynamics. Like Indiana University’s 1976 NCAA championship team, they get so familiar with how each other thinks that they act as a single body, knowing who is going to do what at every moment, knowing that each person is looking out for everyone else’s safety and knowing that there is a constant willingness to help get the job done throughout the day. This sounds like a “per-

CAPITAL EQUIPMENT COMPANY 9714 Ensley Lane Leawood, KS 66206 John Mabry 816-830-6421

fect world” scenario until it’s time to rotate new people into the group for cross training or development for promotion. Now some unique challenges present themselves: 1. Employees in the group may not welcome new employees because they do not know how this person will “support the team.” This concern may be a real one of there is no expectation and accountability from within the training program that a person learn and participate in the teamwork aspect of the job. Many times training programs are SOP based. Testing and proficiency assessments are task focused. This type of training program fails to address expectations for learning how to “manage the work” as an overarching requirement of working in a team environment. Only management can fix this problem because management sets the expectations for

KORTE BROS., INC. 620 W. Cook Rd. Fort Wayne, IN 46825 260-497-0500 email: Beauford@KorteBros.com

performance and only management can hold people accountable for meeting those expectations, not the team. 2. Special management tools and processes are often needed to help the team stay on track with one plan. Sitting in a meeting talking about what should happen that day may not be adequate to capture a structured plan for the day. A planning worksheet with team member names and tasks done on shift often helps solve this problem, especially if team members are physically separated during the day as they complete their tasks. Management must be aware of the success factors associated with tight knit teams and design management tools and processes to compensate for the positives and negatives that come with them. Thought for the month: Even the best team will be compromised

MEAD EQUIPMENT, INC. 16659 Stonecrest Dr. Conroe (Houston), TX 77302 936-446-1660 info@meadequipment.com TX, LA, NM

The Road Less Traveled by Kay Sever long term if management does not take responsibility for sustaining their success into the future. If you cannot seem to create the culture you desire, you need to talk to Kay. A thought leader and specialist in mining culture, she can shed new light on the hidden barriers that may originate from decades and acquisitions of the past. She has 30 years of mining experience and a handson track record of success in changing mining culture to improve performance and can help your people be more effective in planning, communications and preventing problems. She will “connect your people to performance and profits” and help you “manage change like you manage opera-

SWANSTON EQUIPMENT CORP. 3450 Main Ave. Fargo, ND 58103 701-293-7325

tions.” Kay works with every organizational level and department to find the highest dollar opportunities and remove barriers that prevent sustainable change. She helps management teams lead improvement and better execute the budget, capital approvals, incentive plans, communications, etc. Kay also implements improvement programs for mining and downstream processing facilities. See MiningOpportunity.com for details on her services and contact information. Look for the mining edition of her first book “Building An Opportunity Culture - Addressing the Barriers That Steal Profits and Prevent Sustainable Change,” available on her website under Products/Books.

STEVENSON EQUIPMENT LTD. 320 Spadina Rd. Toronto, Ontario, CN M5R 2V6 905-841-8888 email: info@stevensonequipment.com

Page 7 • North American Quarry News • July 2011

Work teams and expectations for teamwork

July 2011 • North American Quarry News • Page 8

16th Year in Bus iness

SUGGS EQUIPMENT SALES, INC.

Yard Location: 45245 U.S. Highway 280 Sylacauga, Alabama 35150 Mailing Address: P.O. Box 381116 Birmingham, Alabama 35238-1116

877-241-7756 Fax: 205-980-5766 Bobby Suggs - Cell: 205-281-9370 Email: bobbysuggs@att.net Chris Suggs - Cell: 205-470-5161 Email: seschris@hotmail.com Web site: www.suggsequipment.com

EAGLE IRON WORKS 36”x8’ Portable Pugmill Mixing Plant, MCLANAHAN 38”x30’ Twin Shaft Logwasher, twin speed Detroit 6-71 diesel engine, hyd. elevating legs/stabilizers, spray bar reducers, good paddles, new bearings, painted (90) . . .$58,500 system, NEW radial tires, lights, rated 350-750 TPH, new paint . . $58,500

30”x120’ Radial Stacker, elec, w/ belt, power radial, power raise/lower (in photo) . . . . . . . . . .$48,500 36”x50’ Radial Stacker, elec, w/ belt, manual rad, manual raise/lower . . . . . . . . . . . . . . . . . . .$15,000 36”x85’ Radial Stacker, elec, w/ belt, manual rad, manual raise/lower . . . . . . . . . . . . . . . . . . .$28,500 36”x100’ Radial Stacker, elec, w/ belt, manual rad, manual raise/lower . . . . . . . . . . . . . . . . . .$35,000 36”x120’ Radial Stacker, elec, w/ belt, mast w/ winch raise/lower, man rad . . . . . . . . . . . . . . .$45,000 42”x90’ Radial Stacker, elec, w/ belt, manual rad, manual raise/lower . . . . . . . . . . . . . . . . . . .$38,500

36”x150’ Channel Frame Conveyor w/ electric drive, stands, belting, feeder, enclosed in a sectional 10’ steel tunnel casing, good condition (99) . . . . . . . . . . . . . . . . . . . . . . . . . . .$125,000

KOLBERG 24”x150’ Mast Type Radial Stacker, no belt, elec, winch raise, man rad .$45,000 (2) 36”x80’ Arm Support Port Conveyor, elec drive, w/ belt, truss frame . . . . .$22,000 each 36”x70’ Arm Support Port Conveyor, elec drive, w/ belt, truss frame . . . . . . . . . . . .$20,000 36”x100’ Arm Support Port Conveyor, elec drive, w/ belt, truss frame . . . . . . . . . . .$28,500 42”x90’ Arm Support Port Conveyor, elec drive, w/ belt, truss frame . . . . . . . . . . . .$38,500

Two (2) CEDAR RAPIDS/EL JAY RC 54II Semi-Portable Cone Crushing/Screening Plant, rubber tired carriers w/ 5th wheels, 54” std. head cone w/ 300 HP motor, 6’x20’ TD hor. vib. screen w/ 30 HP motor, dir. chutes, fines conveyor (units now stationary, will take down & install running gear) (94 & 98) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$145,000 Each

EXTEC “Mega Bite” Crawler Jaw Crushing Plant, SN: 5115, 6,800 hrs., Deutz diesel engine, feed hopper w/ vibrating Grizzly feeder, product bypass belt under feeder, 2644 jaw crusher w/ NEW jaw dies, rear discharge conveyor (98) . . . . . . . . . . . . . . . . . . . . . . . . . . . .$155,000

PIONEER 3042 Semi-Portable Jaw Crushing Plant, elec. powered, vibrating Grizzly feeder w/ hopper & 25 HP motor, 3042 jaw crusher w/ jaw dies @ 80% wr, new bearings & rework on eccentric shaft 2 months prior to shutdown, on 2 axle carrier w/ 5th wheel (unit now stationary, will take down & install running gear) (86) . . $155,000

METSO/SVEDALIA 8’x20’ TD “XH” Incline Screen, less motor, 36”x185’ Portable Roadable Truss Frame Conveyor, elec drive, 42”x2,100’ (+/-) Combination of Channel Frame/Truss Frame EIW 44”x32’ Single Sand Screw, new Uret liners, new outboard brg, new paint . . . . drive belts, w/ mounting springs & cups, urethane cloth (3”, 1.5”, on two axle carrier, fifth wheel, w/ belt . . . . . . . . . . . . . .$125,000 Conveyor, NO BELT, 250 HP elec drive, 6” trough & return idlers, . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$28,500 approx 400’ of truss frame & 1,700’ of channel frame, covers, cat- EIW 54”x34’ Single Sand Screw, new ABR liners, outboard brg, new paint . .$34,500 3/4”), painted (89) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$37,500. walks/handrails . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .POR

TEREX/SIMPLICITY 8’x20’ TD Incline Screen, twin drives w/ 25 HP 2001 KOLBERG 10’x40’ Stationary Sand Classifying Plant, rated @ 350-450 GATOR PEX 1252 Portable Jaw Crushing Plant, w/ a 4 step 44”x16’ FINLAY 8E30 Portable Wet Screening Plant, all electric, on motors, support stands, catwalks/handrails, screen cloth, excellent (01) TPH, w/ 11 stations, 3 cell collecting flume, recirculating system, computer con- vib Grizzly feeder w/ 25 HP motor, a 12x52 jaw crusher w/ a 75 HP single axle dual tired wheels w/ fifth wheel hookup, 4’x8’ DD . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$125,000 trols, w/ supports, one (1) each Kolberg 44”x32’ sand classifying/dehydration motor, rear discharge conveyor, can accept 10” feed & crush to -1” (99) wet screen, feed hopper, new paint . . . . . . . . . . . . . .$28,500 screws, (1) Eagle Iron Works 54”x34’ single sand screw w/ good liners, (2) 36”x85’ radial stackers w/ man rad & raise/lower . . . . . . . . . . . . . . . . . . . . . . . . .$175,000 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$58,500 SCREENS... PORTABLE FINLAY 8E30 Portable Wet Screening Plant, all elec., 4’x8’ DD incl. wet screen, new paint ......................................................................................................................$28,500 SCREENS... STATIONARY ALLIS CHALMERS 8’x20’ “XH” Triple Deck Incline Screen, dual mech, bare screen ........ ....................................................................................................................$32,500. ALLIS CHALMERS 6’x16’ Single Deck Hor Screen, overhead ecc, no mtr............$8,500. EL JAY 6’x20’ Triple Deck Horizontal Vib. Screen, w/ electric drive, screen cloth, mounted on frame, complete (88) ..........................................................................$22,500 SIMPLICITY 5’x14’ TD Incline Screen, support....................................................$12,500 SIMPLICITY 4’x12’ TD Incline Screen ....................................................................$7,500 HARTL 4’x8’ Double Deck Incline Vibrating Screen, w/ two side discharge conveyors, one rear discharge fines conveyor, hydraulic driven ..........................................$23,500 HEWITT ROBINS 5’x16’ TD Incline Screen ............................................................$9,500 TELESMITH 4’x10’ DD Incline Screen, elec, on stand ............................................P.O.R. ALLIS CHALMERS 6’x20’ DD Incl Screen, no mtr., no screen cloth, mounting springs (98)................................................................................................................$18,500 SIMPLICITY 8’x20’ Four Deck Incl Screen, on stand comp w/ motors, screen cloth, fines collection chuter w/ rear disch conv....................................................................POR CRUSHERS... PORTABLE (2) CEDAR RAPIDS/EL JAY RC 54II Portable Cone Crushing/Screening Plants, elec., w/ 54” “std. hd.” cone crusher, 6’x20’ TD horizontal screen, on two axle carriers (94 & 98) ......................................................................................................$145,000 Each

GATOR PEX 1252 Portable Jaw Crusher, can accept up to 10” feed & crush to -1”, w/ 75 HP motor, 44”x16’ four stage vib. Grizzly feeder w/ 25 HP motor, prod. discharge conveyor (99) ................................................................................................$58,500 PIONEER 3042 Portable Jaw Crushing Plant, elec., w/ vib. Grizzly feeder, 3042 jaw crusher, on two axle carrier (86) ..........................................................................$155,000 CRUSHERS... STATIONARY GUNDLACH 56” Double Roll Coal Crusher, (2) 25 HP motor ..............................$18,500 WILLIAMS 330K2 Pulverizer Hammermill Crusher, requires 200 HP elec. motor, spare set of hammers w/ unit (88)................................................................................$23,500 KUE KEN 2436 Bare Jaw Crusher, lube syst, mo mtr, no drives ................................POR CONVEYORS... RADIAL BARBER GREEN 24”x50’’ Port. Conv., elec, man raise/lower & radial, w/ belt ....$11,500 SESCO 24”x50’ Radial Stacker, elec. power raise/lower, man. rad. w/ belt............$8,500 42”x90’ Radial Stacker, elec., w/ man. rad., man. raise/lower, 3 ply belt (98) ....$38,500 36”x85’ Radial Stacker, elec., w/ man. rad., man. raise/lower, 3 ply belt (98) ....$28,500 CONVEYORS... STATIONARY 30”x50’ Channell Frame, complete, elec. drive, belt ..............................................$6,500 36”x85’ Truss Frame w/ motor, less belt & supports ..........................................$17,500 36”x1,000’ Overland Conveyor System w/ 210’ of truss w/ catwalks, 800’ of channel, w/ drives, motors, 2 ply belting........................................................................$135,000 SAND & GRAVEL EQUIPMENT EAGLE IRON WORKS 54”x34’ Sand Screw, single, NEW ABR ............................$34,500

EAGLE IRON WORKS 44”x32’ Single Sand Screw, elec. NEW outboard bearing, NEW urethane liners ....................................................................................................$28,500 EAGLE IRON WORKS Portable 36” Twin Shaft Pugmill, Detroit 6-71 diesel, w/ water .... ......................................................................................................................$58,500 KOLBERG 10’x40’ Stationary Sand Classifying Plant, elec. drive, 11 station, 3 cell, computer controls, rising current class, (2) 44”x32’ sand screws, (2) 24”x70’ radial stackers (01)................................................................................................$175,000 McLANAHAN 38”x30’ Twin Shaft Logwasher, elec. w/ stand (90) ......................$58,500 10” Sand Pump w/ motor........................................................................................P.O.R. 6”x6” Sand Pump DIESEL GENERATORS CAT 105KW Diesel Generator, on skid, side controls, 3 ph and 1 ph connectors, painted ......................................................................................................................$12,500 DETRIOT DIESEL 125 KW Diesel Generator, Det. 6-71 diesel engine, on support frame, open, w/ controls & gauges, switch box ........................................................$9,500 STAMFORD 160 KW Diesel Generator, Iveco diesel engine, 1,435 hrs., in enclosed trailer w/ switch boxes, circuit breakers/starters (99) ........................................$28,500 PARTS MACHINES & ATTACHMENTS PUMPEX 8” Electric Submersible Pump, 94 HP, w/ controls ................................$9,500 INDECO MES3500 Hyd. Impact Hammer, 5,000 ft./lbs. energy, for 70,000 - 100,000 lb. excavator, point, bracket, painted ..................................................................$15,000 10’x10’ Crushing Plant Control House, A/C, push button controls, w/ electric control center w/ switches, breaker & starter boxes ....................................................$140,000

All Prices are F.O.B stocking location and are subject to prior sale. Prices do not include disassembly and loadout of the equipment. Equipment is represented as accurately as possible but specifications are not guaranteed. All equipment is offered “AS IS” with no warranty and is subject to applicable sales tax.

SUGGS EQUIPMENT SALES, INC.

(3) Each 36”x140’ Stat Truss Conveyor, elec, w/ belting, walkways/handrails, supports (in photo) $32,500 each; 30”x60’ truss, elec, belt, legs $14,000; 30”x130’ truss, elec, belt, legs $24,500; (3) 36”x50’ truss, elec, belt, legs $16,000; 36”x65’ truss, elec, belt, legs $17,500; 36”x80’ truss, elec, belt, legs $22,500; (2) 36”x110’ truss, elec, belt, legs $28,500; 42”x25’ truss, elec, belt, legs $7,500; 42”x130’ truss, elec, belt, legs $38,500; 48”x65’ truss, elec, belt, legs $22,500

Yard Location: 45245 U.S. Highway 280 Sylacauga, Alabama 35150 Mailing Address: P.O. Box 381116 Birmingham, Alabama 35238-1116

877-241-7756 Fax: 205-980-5766 Bobby Suggs - Cell: 205-281-9370 Email: bobbysuggs@att.net Chris Suggs - Cell: 205-470-5161 Email: seschris@hotmail.com Web site: www.suggsequipment.com METSO Stationary Gravity Separator, electrc, rated at 150 TPH, setup to make separation at 200 mesh (92) $145,000

(30) USED READY MIX TRUCKS - MACKS - VOLVOS - INT’L front & rear discharge, (88-99) . . . . . . . . . . . . . . . . . . . . .P.O.R.

36”x185’ Channel Frame Conveyor, elec, belt, supports (in photo) $45,000; 36”x190’ Channel, elec, belt, supports $48,500; 36”x240’ Channel, elec, belt, supports $55,000; (2) 36”x110’ Channel, elec, belt, supports $35,000 ea; (2) 36”x115’ Channel, elec, belt, supports $37,500 ea; (3) 36”x90’ Channel, elec, belt, supports $32,500 ea; 36”x80’ Channel, elec, belt, supports $28,500; (2) 36”x60’ Channel, elec, belt, supports $23,500 ea; (3) 36”x50’ Channel, elec, belt, supports $21,500 ea; (2) 36”x25’ Channel, elec, belt, supports $5,500 ea; (2) 36”x16’ Channel, elec, belts, supports $4,500 ea

10’x10’ Agg Plant Control House, elevated 20’ w/ access ladder, walkway w/ handrail, AC, w/ push button controls (94) . .$45,000 8’x40’ Electric Motor Control Center w/ circuit breakers/starters, in conduit, w/ climate control . . . . . . . . . . . . . . . . . . . . . .$95,000

50 Ton Split Hopper w/ support legs, 42”x35’ discharge conveyor $25,000 POWERSCREEN Model 1200 Port Screen Plant, 2,100 hrs, Deutz 30 Ton Hopper w/ support legs, 36”x20’ discharge conveyor..........$18,000 dsl eng, 5’x10’ DD inc screen, (3) prod delivery conveyors, on rubber 30 Ton Hopper w/ support legs, no discharge conveyor ................$15,000 tires w/ 5th wheel and running lights (01) . . . . . . . . . . . . . . .$58,500 10 Ton Hopper w/ support legs, twin discharge chutes, no conveyors ........ ..........................................................................................................$12,000

KUE KEN 2436 Bare Jaw Crusher, w/ lube system $29,500

MANITOWOC 2900 T Series II Lattice Trk Crane, 70 ton cap., TEREX Model TC 2863 Crane, 14 ton cap with a 63’ main boom w/ 24’ AMERICAN 7225 Crawler Lattice Boom Crane, rated @ 85 ton cap., GROVE RT 528C Hyd. RT Crane, 28 ton capacity, Cum 6BT5.9L 8x4, Cummins diesel up/down, air controls, 2 drums, 160’ boom, to 40’ telescoping jib, front & rear outriggers, anti two block, 8’x14’ steel powered by a Cummins C250 dsl. eng., torque conv., main & aux. dsl eng, 4 way steer, 4x4 drive, 20.5x25 tires rated at 50% WR, 50’ jib, 3 shv blk (72) . . . . . . . . . . . . . . . . . . . . . . . . . . . .$79,500 bed, on a STERLING chassis, dsl eng, 5 spd trans, 2 spd rear axle (99) drum, 3rd drum, 120’ of boom w/ pendants, expandable crawler single winch 70’ three section boom, no jib, headache ball, hook . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$38,500 frames, 40K lbs. of removable counterweight, 2 sheave hook block, block, anti-two block (86) . . . . . . . . . . . . . . . . . . . . . . . .$39,500 headache ball, parts & operating manuals, nice crane . . . $195,000 (2) TEREX/SIMON TC2863 same as above (96) . . . . .$29,500 each

GROVE RT 58 Hydraulic Rough Terrain Crane, 14 ton cap., GROVE RT522 Rough Terrain Crane, 22 ton, Detroit diesel, one GROVE RT 65S Hydraulic RT Crane, SN: 31415, Cat dsl. eng., 35 TADANO Model TR 280XL RT Crane, rated @ 28 ton cap., 3,500 hrs., Detroit diesel, 4WD, 4 way steer, 60’ boom, 20’ jib, good tires, winch, 70’ boom, 23’ jib, block (79) . . . . . . . . . . . . . . . . .$32,500 ton cap., 104’ bm., 32’ jib, hook blk., ball, 29.5x25 tires (70%), block & Mitsubishi dsl. eng., w/ 4x4 drive, 4 way steer, 72’ boom, 25’ lattice jib, hook block, new paint (74) . . . . . . . . . . . . . . . . . . . . . .$15,000 ball, painted (74) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$48,500 single winch, 20.5x25 tires @ 70% WR, 30 ton block (90) . . .$79,500

EARTHMOVING EQUIPMENT CAT D9H Crawler Dozer, EROPS, cab, htr., A/C, full “U”blade w/ tilt, 60% UC, 4 BBL ripper, good runner (80) ............................................................$58,500 CAT 988B Wheel Loader, cab, htr., A/C, (L-4) tires @ 50% WR, 7.5 yd. spade nose bkt. w/ teeth (77) ........................................................................P.O.R. (2) DUNBAR 1 Cu. Yd. Articulating Clamshell Machines, 15’ reach, 1.0 yd. clamshell bkt., stationary mount, electric/hydraulic drive & controls ............ ................................................................................................$15,000 Each EFFICIENCY 3,000 Gal. Water Tanker w/ gasoline fill pump for insert into 16 yd. dump body ..........................................................................................$9,500 FRUEHAUF 3,500 Gal. Water Tanker w/ gasoline fill pump on two axle carrier w/ fifth wheel............................................................................................$9,500 DRESSER 515B Loader, cab, GP bucket, 60% tires (83) ........................$15,000 IR SD100F Compactor, Cummins dsl., OROPS, drum drive (98)............$39,500 LIEHBERR R974HD Hydraulic Excavator, Liehberr dsl. engine, mass excavat boom/tip, 6.0 cu. yd. bucket w/ teeth, A/C ........................................$75,000 TEREX 3305B Hauler, Det. dsl., bed liners, good tires (77) ....................$26,500 (2) Lube/Fuel Bodies w/ (5) each lube/oil tanks w/ air discharge, air comp., 600 gal. dsl. tank ..............................................................................$9,500 Each

CRANES & LIFT EQUIPMENT AMERICAN 7225 Crawler Crane, 85 ton cap., Cummins diesel, torque conv., 3 drums, 120’ boom, air cont. (86)....................................................$195,000 GENIE Z60/34 Aerial Manlift, Deutz diessl, 4x4, 60’ work height (93) ....$26,500 GROVE RT 65S Rough Terrain Crane, 35 ton cap., Detroit diesel eng., 4x4 drive, 4 way steer, one winch, 104’ boom, 32’ jib, blk. & ball (74) ............$48,500 TAYLOR 22,500 Forklift, Detroit diesel, OROPS, 15’ mast ......................$23,500 CLARK 250 30,000 lb. Forklift, gas/propane, 15’ & 21’ mast..................$25,000 CLARK/LIMA 550TC Lattice Boom Truck Crane, 55 ton cap., Cummins up/down, 8x4, 3 drums, 170’ bm., 30’ jib, blk., ball (69)..................................$39,500 JLG 1250BT Crane (no truck), rated 12.5 tons, 57’ reach, painted (88) $15,000 LORAIN LRT 200 RT Crane, 20 ton, Detroit diesel, 2 winch, 70’ + 25’ (79) ........ ..........................................................................................................$28,500 GROVE RT 522 RT Crane, 22 ton, Detroit diesel, 70’ + 23’ (79) ............$32,500 GROVE RT58 RT Crane, 14 ton cap., Detroit diesel, 4x4x4, 60’ bm, 30’ jib, blk. (74) ..................................................................................................$15,000 MANITOWOC 2900 T Series II Lattice Trk Crane, 8x4, rated 70 ton cap., Cummins diesel up/Cummins diesel down, 2 drums, 160’ boom, 50’ jib, blk. ..........................................................................................................$79,500 MASTER CRAFT S-10-P-6 Forklift, rated 10,000 lbs., Perkins diesel, 21’ mast, rear steer, dual front tires/drive, painted (99)....................................$12,500

P&H “OMEGA 25” RT Crane, rated @ 25 tons, Detroit diesel, 80’ boom, no jib, one winch, ATB, block & ball ..........................................................$32,500 PALFINGER PK 16000D Articulating Boom Crane, 47’ reach, 12,240 lbs. @ 7.9’ reach, on Ford tri axle truck, Cat. C10 dsl. eng., Allison auto. trans., 60,000 GVWR, 2 beds, 18’+10’ (97) ............................................................$28,500 TADANO TR 280 XL RT Crane, 28 ton cap., Mit. diesel, one winch, 72’ boom, 25’ jib, LMI/ATB system, block & ball (90)..............................................$79,500 ASPHALT EQUIPMENT BEARCAT 2,500 Gal. Asphalt Distributor, hydrostatic drive (PTO) air controls, 14’ spray bar, on Ford F800 w/ V8 gas engine (78) ..............................$18,500 CONCRETE EQUIPMENT & PLANTS (30) Used Ready Mix Trucks - Macks, Volvos, Int’l - front & rear discharge - various ages ..............................................................................................P.O.R. (3) Stationary Baghouses, 5,000 CFM to 7,500 CFM ................................P.O.R. 7”x40’ Screw Conveyor w/ speed reducer and motor mount....................$2,900 17”x30’ Screw Conveyor w/ speed reducer and motor mount..................$3,900 FEEDERS SAUNCO 36S Feeder, electric w/ box ......................................................$12,500 POWERSCREEN 30”x25’ Belt Feeders w/ supp., elec. ..............................$8,500 18”/24”/30” Belt Feeders up to 20’ long, electric ......................................P.O.R.

Page 9 • North American Quarry News • July 2011

16th Year in Bus iness

July 2011 • North American Quarry News • Page 10

AEMP elects new Executive Committee members and President/CEO, Chairman of the Board

Dave Gorski. GLENWOOD SPRINGS, CO — AEMP (Association of Equipment Management Professionals), the

premier organization for asset management professionals of off road fleets, has elected the new 2011/2012 Executive Committee members to its Board of Directors. Each year, AEMP members select top peers from various organizations to lead the board, as well as the organization’s new president/CEO who also serves as chairman of the Board. The new members were recognized and inaugurated at AEMP’s 29th annual Spring Manage-

ment Conference in Las Vegas. Dave Gorski, CEM, equipment manager for K5 Construction, Chicago was elected president/CEO and chairman of the Board. He will take office immediately and serve through March 2012. Gorski’s main goals for the upcoming year are building on the organization’s strategic initiatives, including two of the most recent — AEMP University and Green Fleet Certification.

“AEMP experienced two major milestones in both these initiatives early this year,” he said. “AEMP University was officially launched at the conference, and we awarded our first Green Fleet certified company. I’m looking forward to continuing with these important initiatives and building on the awareness and momentum they’ve already created.” Additionally, Gorski and his leadership team will continue to focus on building partnerships within the industry. Evidence of that commitment is AEMP’s involvement with the Association of Equipment Manufacturers. AEMP provided educational seminars at the recent CONEXPO tradeshow, and will continue joint education efforts at the ICUEE Demo Expo this October. Gorski has been a member of AEMP since 1999. He earned the certified equipment manager

(CEM) designation in 2000, and has served on numerous boards and committees since 2005. In his time as an active member, he has held numerous board and committee positions, including treasurer, chair elect and director of Construction Fleets. In addition to a new CEO, AEMP elected six new Executive Committee members to the Board of Directors. Guy Gordon, CEM, director of Asset Management for Insituform Technologies, Chesterfield MO was selected chairman elect and will assume the position of chairman of the Board in March 2012. Three vice chairmen were also chosen, Dan Connelly, CEM, vice president of Equipment, Oldcastle, Columbus, Ohio; Chris Ryan, CEM, equipment manager, Boh Bros. Construction, New Orleans, LA and Bob Merritt, CEM, director of equipment, URS Corporation, Boise, ID. Finally, Pat Crail, CEM, fleet information manager, John R. Jurgensen Co.,

Cincinnati, Ohio was elected treasurer. Daryl Crear, fleet manager, Rumpke Consolidated Companies, Cincinnati, Ohio and outgoing chairman/CEO, will serve as immediate past chairman. Formed in 1980, the Association of Equipment Management Professionals represents fleet professionals working in construction, government, utilities, energy, mining and more. AEMP maintains relationships among manufacturers, users, governmental agencies, educational institutions and others involved in the design and management of heavy equipment. AEMP created the term “Equipment Triangle.” It is the cornerstone of the association’s philosophy that a balanced relationship must exist between the end user, distributor and OEM/supplier in the life cycle of a piece of heavy equipment or product. AEMP advances this philosophy through its education and certification programs. For more information, visit www.aemp.org.

People on the Move

Row Electrical Equipment, Inc. PO Box 2812 • Toledo, Ohio 43606 Your Source for Used & Reconditioned: • • • • • • • • • • • • •

Squirrel Cage Motors Gear Motors Wound-Rotor Motors DC Motors Phase Converters Adjustable-Speed Drives Generators, AC and DC Engine-Generator Sets Transformers, Single Phase Transformers, Three Phase Across/Line Starters Reduced Voltage Starters Safety Switches

We Buy Used Electrical Equipment 24 Hours a Day Call

800-248-4479 Fax: 419-244-8887

Visit Our Web Site: www.rowelectrical.com E-mail: rowelec@glasscity.net

REDMOND, WA — Terex Aerial Work Platforms (AWP), a business segment of Terex Corporation (NYSE: TEX), has announced that Tom Saxelby has been appointed to the position of vice president, North American Sales, Terex AWP. In this role, Saxelby will lead North American initiatives for the sales and customer service functions. The position reports directly to Matt Fearon, vice president and general manager, Terex AWP Americas. “Saxelby’s proven track record in sales makes him an essential addition to the executive team,” said Fearon. “His skills and experience are vital in developing national initiatives and achieving company objectives.” In his new position, Saxelby will lead strategic programs and the devel-

opment of the sales team. He will also assume the primary sales leadership role with customers and will focus on delivering the quality, solutions and support that customers have come to expect of the Genie brand and of Terex. Providing support in these objectives will be a team of regional vice presidents. Saxelby joined then Genie Industries in 1998 as a sales representative and has been a key player in the growth of the Central Region. Saxelby went on to become the regional vice president, which gave him a solid base from which to expand his responsibilities. He provided leadership to five talented sales managers across 15 states and completed a six month assignment in China focusing on developing dealer distribution. Saxelby holds a Bache-

lor of Arts degree in Journalism from the University of Wisconsin, Eau Claire. Terex Corporation is a diversified global manufacturer operating in four business segments: Terex Aerial Work Platforms, Terex Construction, Terex Cranes and Terex Materials Processing. Terex manufactures a broad range of equipment for use in various industries, including the construction, infrastructure, quarrying, mining, shipping, transportation, energy, refining and utility industries. Terex offers a complete line of financial products and services to assist in the acquisition of Terex equipment through Terex Financial Services. More information on Terex can be found at www.terex.com.

People on the Move

www.quarrynews.com

Page 11 • North American Quarry News • July 2011

Terex AWP names Tom Saxelby vice president of North American Sales

July 2011 • North American Quarry News • Page 12

‘F rom Roofs to Roads, ’ T idewater Green opens new doors to the marketplace

by Jon M. Casey

A load of ground shingles is headed for an asphalt company in North Carolina. It has been just a little over one year since Andy and we market it in various ways to nearby Warren obtained the necessary permitting to open customers.” Tidewater Green, a shingle and wood waste recycling Warren said that for the first year of operation, facility in Chesapeake, VA. Once the doors were open when he had a sufficient amount of shingles to grind, however, it didn’t take long for the community to he would call in a contract grinding company to grind respond. Since then, the business has grown steadi- what he had on hand. As time passed, he accumulated enough wood waste to have it ground as well. It ly, with new customers added weekly. “We stared out looking to recycle tear off shingles, wasn’t long before Warren could see that it was time as a way of diverting them from the local landfills and for them to consider purchasing a grinder. Thus, on as a way to help reduce the cost of petroleum based the day that North American Quarry News was tourasphalt mix ingredients for the paving industry,” said ing the Tidewater Green Recycling Center, he was Warren during a recent visit. “What we quickly found demoing a new Rotochopper® MP 2 grinder, one of was that when roofers pulled off the roofing material, the equipment brands that he has been considering. a lot of times, they needed to make repairs to the “We were getting a tremendous amount of wood in wooden structures underneath. That made for mixed with the shingles,” he said. “We were having the wood loads of C&D material. We began taking that in as ground, and we then would sell it to nearby liquid well and sorting it. We began grinding the wood waste waste processors who use the ground wood as a

After the shingles are dumped, Byron Daye pushes them up onto the stockpile inside the materials receiving building.

Tidewater Green's company logo reminds visitors of the company's desire to turn recycled shingles into new paving material. solidifier for the liquid waste. In that way, they have more options for how they could dispose of that material once the liquid had been absorbed. With our own grinder, it will give us more options for our wood waste material.” “Today, we wanted to get a feel for how a high speed grinder would work,” said Warren. “We tested a slow speed grinder earlier this year and today, Jody Parker and Dennis Finken brought their unit by to show us how it performs under our conditions. We are looking to purchase a Rotochopper MP266, which is actually a larger unit than this one, but Jody was going to be in the area demoing this unit throughout the region, and we agreed that this would be a good opportunity to see how well a high-speed grinder would work for us.” “From Roofs to Roads” Warren recalled that he had come from a construction background, and was a professional firefighter before going into business with Dickie Cameron, a former police officer for the Virginia Beach Police Department. “Dickie had started a dumpster rental company, and was looking to open a transfer station when I approached him about going together in this operation. I had been in the underground utility business and had bought a hook lift truck to haul waste, dirt spoil and new piping

TidewaterGreen 13

material. Before I knew it, I was hauling and supplying open top containers for other contractors and builders. Eventually, I ended up owning 40 open top containers for rental. That was five years ago. As that business took off, it wasn’t long before I could see that I wanted to be the one to receive the waste rather than hauling it to a landfill.” “Dickie and I put our heads together,” he said. “Then, we came up with some private investors who had faith in us. We began operations last April. Since then, we’ve just kept growing and growing.” “We are passionate about landfill diversion and saving our resources, especially when it comes to foreign oil,” said Warren. “That is why we started with recycling shingles. VADOT allows approved mixes using ground shingles (RAS) as well as ground asphalt (RAP), and we saw that there was not a reliable resource in this area for ground shingles, that asphalt producers could come to for quality ground material.” Warren sees a bright future in the ground shingle market, especially with the high prices of petroleum and asphalt products. By sorting materials on their Doppstadt DUS 6090 picking station before stockpiling the shingles for grinding, they are able to improve the quality of their raw material and at the same time, they can recycle other metals, plastic, paper and wood that tends to make its way into the loads as they come into the center. “RAS has four to five times the asphalt percentage of RAP,” said Warren. “We want to process the shingles as a hot-mix additive that pavers can use with confidence. So we have opened new doors to that market in the tidewater area of Virginia. What is really exciting is that we have rail and barge capabilities from this location as well.” Warren said that he was especially pleased with how well and how closely the VA Dept. of Environmental Quality worked with him and his people as they went through the permitting process. “They were there to help us every step of the way,” he said. “They want businesses like ours to succeed because they see the need for recycling these various materials as a way of helping the nation.” One of the biggest challenges that Tidewater Green has found in its first year of operation is getting paving contractors to come onboard with using more RAS in their mix designs. “Because of the difficult economic times right now, asphalt producers are hesitant to try something new,” said Warren. “They are slow to change because of the uncertainty in the marketplace. Despite the proven results of RAS, paving companies are still slow to make the changes in their formulations, which would make RAS a regu-

Dickie Cameron, Tidewater Green operations manager and partner, talks with Jody Parker of Rotochopper, while workers move a Volvo excavator that will be used to load the grinder.

lar ingredient in many of their products.” “More people are looking for ways to save on the cost of materials, and RAS is certainly one of those ways. Last year, we were able to divert more than 13,000 tons of shingles and wood from the landfills.

We are looking to more than double that this year.” For more information on Tidewater Green, contact Andy Warren at 757-487-4736 or online at www.tidwatergreen.com.

Andy Warren loads wood waste into the Rotochopper MP2 during a recent demonstration at Tidewater Green's facility in Chesapeake, VA.

Rotochopper demonstration gives recycler on site appraisal by Jon M. Casey As Andy Warren began to look for ways to grind his shingles and wood waste material, he entertained the idea of both low and high speed grinders to do the job. After a trial with a popular low speed unit, he turned to Jody Parker, regional sales manager for Rotochopper®, Inc. for an alternative high speed unit to use as a comparison. Warren had been considering the purchase of an MC-266 so that he would have the flexibility of being able to grind material on site at his Tidewater Green recycling facility. He also wants to, be able to move it from site to site so that he can offer custom grinding for other contractors and recyclers in the area, in much the same way that he had been relying upon custom material grinders to deal with his own shingles and wood waste. By running the numbers on Tidewater Green’s raw waste material intake, Parker and Warren determined that Tidewater would be best served by a grinder that would be more compact and portable than the RG-1 purpose built shingle grinder or the B-66 SP, the two primary Rotochopper shingle grinder models. Roto-chopper also offers a compact electric powered stationary shingle grinder, the RG-1 S, but because Warren wants the versatility to grind wood

and take the machine anywhere, the MC-266 is a really good fit for his volume of wood and shingle waste. As a way for Warren to observe a Rotochopper in action, when Parker had the opportunity to demonstrate an MP-2, a smaller though powerful grinder, at Tidewater Green, Warren jumped at the opportunity. He was looking for a unit that not only could make short work of the shingles that Tidewater Green takes in, but he was also looking for a grinder that could turn his wood waste and pallets into value added mulch and biomass material that could help enhance the company’s bottom line. Parker, who oversees sales for Ohio, Kentucky, West Virginia, Delaware, Maryland, North Carolina and Virginia, said Tidewater Green’s consideration of the larger MC-266 model will give Warren plenty of capability not only for the company’s current grinding needs, but also for future considerations as well. “The MC-266 has roughly twice the grinding capacity as the MP2,” he said. “While they have similar features the MC-266 will give Tidewater Green the opportunity to grow without the need for an upgrade later on. Meanwhile, Warren can add optional features like the colorizing system and various screen options, so that he

can do everything from grinding shingles to creating colorful, high quality mulch, with the same machine.” Parker said that one of the reasons that Warren is considering a Rotochopper is because of how thoroughly the unit grinds material in one pass. “’Our Perfect in One Pass’ finished product gives mulch producers the product they need the first time through the grinder. That equates to considerable fuel savings in the end. More importantly, the road legal MC-266 can go where Andy needs to take it if he has contractors who want him to do site prep work at their projects.” By working with some of the materials that Tidewater Green has taken in over recent weeks, this demonstration opportunity was extremely helpful when it comes to making the right choice of equipment. “We like to offer our customers demonstrations like this so that they can see for themselves how efficient and versatile our grinders can be,” said Parker. “Today, we will have ground C&D waste and turned wooden pallets into colored mulch, all in the matter of a couple of hours. That’s the kind of flexibility that Andy needs as he grows his business.” For more information on the Rotochopper product line, visit www.rotochopper.com.

Page 13 • North American Quarry News • July 2011

TidewaterGreen

July 2011 • North American Quarry News • Page 14

W.S. Tyler CPA offers faster, more accurate particle measurement than sieve analysis

With up to 20,000 scans per second, the CPA’s high resolution line camera analyzes particles as small as 10 microns, capturing particle shape and size and recording the quantity. ONTARIO, CANADA — The Computerized Particle Analysis (CPA) System from St. Catharines, Ontario based W.S. Tyler, a wholly owned subsidiary of the German based Haver Screening Group, offers more precise particle measurement beyond traditional sieve analysis. Ideal for operations that perform 15-20 or more sieves per day, CPA technology uses a digital line camera to measure particles up to 10 times faster than conventional sieve methods. With up to 20,000 scans per second, the CPA’s high resolution line camera analyzes particles as small as 10 microns, capturing particle shape and size and recording the quantity. This eliminates manual calculations and operator error, while reducing quality assurance costs. The result is more production of higher dollar value material and less waste. CPA equipment is available in multiple sizes, the largest of which can accurately measure material up to 15.5-inches in size. Operations can use it on site or in traveling labs, as well as online and inline. Using an automatic belt sampler, CPA can be used online and automated to run operator

free with scheduled or continuous sampling. One test sample takes just three to five minutes. If material is found to be out of spec, the CPA can be programmed to sound an alarm, stop the process or even change parameters on the processing equipment. Using CPA inline means analyzing 100 percent of the material stream in real time. Inline analysis is used in applications where quality control of the complete material stream is required and sample testing is not sufficient. All material gets analyzed, so the inline unit is generally common at low production rates. Both online and inline units are designed to ensure the customer’s image and bottom line are protected by minimizing the possibility of quality claims or rework of contaminated product. All CPA models use Windows friendly software for reading, recording, calculating, analysis and display of the sample results. Traditional sieve shakers and sieve stacks can determine particle size accurately. But with increasingly stringent quality standards, it’s often necessary to measure particle shape, weight and quantity. Because it involves a mechanical process, traditional sieve analysis can take up to 35 minutes to obtain these results. The sieves can encounter problems with wide tolerances, sieve blinding and manual calculations. With CPA, the material does not require preparation; size and shape are determined in a matter of seconds. Tolerance con-

CPA equipment is available in multiple sizes, the largest of which can accurately measure material up to 15.5inches in size.

ditions and sieve blinding and pegging are eliminated. The calculations are automatic, so results are consistent between operators, shifts and plant locations and can be repeated in large volumes if needed. CPA is also ideal for material processors that strive to meet strict government specifications. Some government agencies have built their material quality requirements around traditional Ro-Tap measuring technology, which has been around since the early 1900s. While CPA acceptance is still in its infancy with these agencies, the technology is proven to accurately measure material for quality assurance. Occasional sieve tests can be conducted to meet their requirements, but using CPA online for consistent, accurate analysis will allow operations to save time and money and prevent waste created by out of spec material. W.S. Tyler is a wholly owned subsidiary of the German based Haver Screening Group. With facilities in the U.S., Canada, Germany and Brazil, the Haver Screening Group is the only company in the world that provides premium screening solutions encompassing the

complete screening circle of particle analysis, screening media, vibrating screens and process equipment, and complete production analysis, service and parts

support. A global leader in mineral processing technology, the group is renowned for its exceptional quality and commitment to continually redefine material pro-

cessing by bringing innovative solutions to the market. For more information, call 800-3255993 or visit www.wstyler.ca.

USED EQUIPMENT SHOWCASE THE “ROCK TO ROAD” TRADE MAGAZINE

North American Quarry News now offers a section of the paper expressly dedicated to the sale of used equipment. Each page of this section will have nothing but used equipment. Available ad sizes will be limited to full, half and quarter pages. FOR MORE INFORMATION CONTACT MATT STANLEY AT (518) 673-3237 EXT. 233 Lee Publications, Inc., PO Box 121 - 6113 State Highway 5, Palatine Bridge, NY 13428

MORRIS, MN — Superior Industries, a leading manufacturer of conveyor systems and components, released the market’s first ever primary and secondary belt cleaning system — sharing the same, common mounting point. With one pole, maintenance workers can avoid adding to their conveyor’s structure, a common task to accommodate secondary cleaners. Another key feature is the Exterra® SFL Dual Belt Cleaner’s unique tension-

Model Single Dual Three Four

ing system — the patented design creates a pressure that is set once, for the life of the blade, during installation. The company’s Exterra SFL Dual Belt Cleaner is designed to nearly eliminate material carry back from the top cover of conveyor belting after it passes over the head pulley. When left unchecked, carry back causes material buildup on idlers, pulleys and other components — a problem that causes mistracking or

Price $2,685 $3,185 $3,685 $4,185

P.O. Box 95 Left Hand, WV 25221 Phone: 304-201-2354 Fax: 304-755-3883 www.conveyweigh.com

belt damage. More importantly, carry back creates unwanted fugitive material piles under the conveyor. The primary scraper is equipped with Superior’s Exterra Primary Belt Cleaner. Packed with more urethane, the blade has one of the bulkiest profiles of any primary scraper on the market. Mounted to the same pole as the primary, the secondary cleaner is available in either AR steel (STD) or tungsten car-

Accuracy 1 - 2% 0.50% 0.25% 0.25%+

bide. It is designed with segmented blades to withstand vibration and impact from belt splices during operation. Superior designs and builds its new Exterra SFL Dual Belt Cleaner to accommodate head pulleys with diameters of 12 to 20-inches and belt widths of 18 to 60-inches. Later this year, the company plans to expand the one time tensioning unit to accommodate pulley diameters up to 30-inches.

The Exterra SFL Dual Belt Cleaner is the first ever primary and secondary belt cleaning system — sharing the same, common mounting point. Headquartered in Morris, MN, Superior Industries designs and fabricates a full line of conveying equipment, telescoping conveyors, supply erect systems, feed systems, conveyor idlers,

pulleys, as well as other conveyor components. Besides Morris, the company operates from manufacturing facilities in Prescott Valley, AZ and Norcross, GA.

Page 15 • North American Quarry News • July 2011

Superior unveils first ever primary and secondary scraper with one mounting point

July 2011 • North American Quarry News • Page 16

Page 17 • North American Quarry News • July 2011

Safety Solutions: Common sense “Common sense is not so common.” - Voltaire I do my best to engage people in my training sessions. I try to make them think. I try to challenge their perceptions of safety and convince them that they can get their work done better if they do it safer. That’s it. Of course there are some skills passed on along the way, but that’s the basis for my safety training. You know how to do your job. You know how to do it safely. Now why aren’t you doing it safely, or what could you do to be safer. “They just don’t use common sense,” or some similar phrase comes up in discussion at many of these sessions. Whether or not I want it to, it comes up. When we are reviewing a fatality where the victim seems to have had a serious lapse of it, a simple need for “common sense” is expressed by those in the room. The need for it also comes into the discussion when participants are complaining of their most recent encounter with a supervisor or inspector. Recently I had a class challenge my own perception of common sense and I have to ad-

mit I changed my idea of “common sense” at least a little. My own opinion of “common sense” was that it wasn’t a reliable safety net or actually not a safety net at all, but an excuse. I guess that’s because as the safety professional I’ve most often had “common sense” thrown at me in response to a safety rule or procedure I was telling someone about that they thought was unnecessary or excessive. “We really don’t have to do all that, we just have to be careful and use a bit of common sense.” “Be careful” is another phrase I don’t care for, but that’s another column. This class, unanimously put common sense at the top of a list of things that keep us all safe. They had some good examples. It wasn’t “common sense” to reach into machinery that wasn’t properly locked out; it wasn’t “common sense” to expect equipment to remain in place without the brakes set and it wasn’t “common sense” to work 45-feet off the ground without proper fall protection. They made a good case for making “common sense” at least one of the tools in your safety bag. It ele-

vated my opinion of it, but I’m still not sold on it being the only thing we need because many would also argue that “common sense” tells you that a parking brake is unnecessary on level ground. The rules, according to MSHA at least say otherwise and I’d have to argue that even though it may not be necessary in most situations it’s also not a hardship and engaging it provides additional protection. Face it. Nobody, except maybe the safety professional, really likes rules, especially when they’re applied to them or applied without consideration for the specific situation. The speed limit is a good rule to keep the guy doing a hundred from killing good folks like me, but it’s not as great an idea when I’m in a hurry or especially when I’m stopped with the state trooper behind me enforcing that rule. We can debate the “common sense” of a 35 MPH speed limit on a section of four lane divided highway or the safety of doing 80 on a straight stretch of interstate with no cars in site, but our defense of “common sense” actions that break the rules fall apart when someone gets hurt.

Of course then it would no longer be “common sense.” It seems that “common sense” much like hindsight is 20/20. How about the MSHA rules? What’s the purpose of them? Well actually it tells us right in the regulations. 30 CFR § 56.1 Purpose and scope This part 56 sets forth mandatory safety and health standards for each surface metal or nonmetal mine, including open pit mines, subject to the Federal Mine Safety and Health Act of 1977. The purpose of these standards is the protection of life, the promotion of health and safety and the prevention of accidents. Well, that certainly seems like a good idea. I won’t get into how they are sometimes applied since I like to stay positive here. The bottom line is that I while agree more than before that common sense is an important part of doing your job safely, I still believe that following the rules and policies of the company and enforcement agencies is also important. Besides, while everyone has those rules and policies to protect them, not everyone seems to have common sense. And

everyone seems to suffer from temporary losses of “common sense” at one time or another. Just a minute: How good is your common sense? Is it going to keep you from getting hurt? Certainly your work should always be approached with a good helping of common sense, but don’t forget to add an understanding of the rules, what could go wrong, and a heaping of skills for the task. Don’t forget to use the most powerful tool you have,

your BRAIN and ALL of your senses. Randy Newcomer is owner of Complete Safety Solutions, a training and compliance provider to mines and the contractor industries that support them. In addition to his company site at www.completesafetysolutions.com he manages www.safeminers.com a site dedicated to the sharing and organization of the best mine safety information and materials for contractors, miners, trainers and managers.

CP Main Pin hydraulic thumbs lend a helping hand The CP Main Pin hydraulic thumb by Paladin Construction Group acts as the perfect assistant to CP Buckets for mini-excavators and excavators up to 100,000-pounds. It allows for a rotation of up to 140 degrees, allowing you to pick up large objects or keep the

thumb out of the way when it isn’t needed. The CP Main Pin hydraulic thumb is designed to hold your load securely with individually serrated thumb fingers that grip the material. Reinforced side plates and thumb fingers add strength so you can confidently pick up most

materials, no matter how heavy or abrasive. The CP Main Pin hydraulic thumb’s fingers are manufactured of T -1 steel, ranging from 5/8inches up to 1-1/2-inches. Installation is simple, requiring only the welding of a hydraulic cylinder bracket and the attachment with a few

pins and a hydraulic cylinder. In addition, CP also offers the: • Progressive Link Hydraulic Thumb — For heavy duty applications, it features a lock-back bracket that prevents the thumb from drifting when not in use and spherical bearings in the

WEIGHSHARK™ Belt Scale View up to 24 scales live via your PC with our remote display with built-in ethernet/http web server.

Single Scale View

* Download .xml production files directly to your PC or thumb drive via our new remote display.

SCALE FEATURES

I Easy Installation I Simple Calibration I Large Graphics Display

hydraulic cylinder and thumb; • Weld-on Hydraulic Thumb — Features versatile, hydraulic thumb positioning and low profile thumb storage for optimal visibility. • Weld-on Stiff Arm Thumb — Features a YYoke thumb adjustment for specific placement and multiple mounting positions for optimum performance. Paladin Construction Group is a leading manufacturer of couplers

and attachments throughout North America for the construction, aggregate, agriculture, landscaping, land clearing, recycle, mining, demolition, utility, aviation and municipal market segments. For more information about Paladin’s entire coupler and attachment offering, call 800-428-2538, fax 330734-3019, e-mail pcginfo@paladinbrands.com or visit www.paladinconstructiongroup.com.

Multi Scale View I Fits Any Width Conveyor I Includes I/O I Includes RS 232, 485 and Ethernet Network

815-622-3181

HTTP Web Server to allow access to scale via Internet Explorer WITHOUT any special software. View scales LIVE... Visit our Web site www.weighshark.com “Manufactured by MCR Technologies Group, Inc.”

The CP Main Pin Hydraulic Thumb is designed to hold your load securely with individually serrated thumb fingers that grip the material.

July 2011 • North American Quarry News • Page 18

North American Quarry News Classifieds 800-836-2888 • Fax: 518-673-2381 • e-mail: classified@leepub.com Number / Classification 15 20 25 35 55 60 70 80 135 150 165 260 265 270 275 280 310 320 330 350 375 385 390 395 400 405 410 415 460 470 495 500 505 535 545 610 635 660 670 675 745 755 765 770 780 800 805 880 885 905 925 930 935 940 950 955 960 997 1000 1010 1020 1025 1040 1045 1065 1090 1105 1115 1120 1140 1145 1170 1175 1180 1185 1205

Aggregate Equipment Air Compressors Air Tools Announcements Appraisal Services Asphalt Equipment Attachments Auctions Bits Buckets Business Opportunities Construction Equipment Construction Eq. For Rent Construction Eq. For Sale Construction Machinery Wanted Construction Supplies Cranes Crushing Equipment Custom Services Decals Dozers Dredging Equipment Drill Bits Drilling Equipment Drills Electric Motors Electrical Employment Wanted Fencing Financial Services For Rent or Lease For Sale Forklifts Generators GPS Systems Help Wanted Hoists Hydraulic Breakers Industrial Equipment Insurance Loaders Lubricants Machine Shop Equipment Magnets Maintenance & Repair Mine Equipment Miscellaneous Parts Parts & Repair Pipe Pressure Washers Professional Services Pumps Quarry Equipment Real Estate For Sale Real Estate Wanted RVs & Motor Homes Safety Equipment Sand & Gravel Scales Screening Equipment Sealed Bids Services Offered Sharpening Skid Steer Loaders Software Sweepers Tires & Tire Repair Service Tools Trailers Training Truck Parts & Equipment Trucking Trucks Used Equipment Wanted

Aggregate Equipment

STEPHENS & BELGRADE NEW PLANTS USED CONECOS, STEPHENS, & HAGANS 12 YARD ERIE MIXER 120 TON AGG-3 COMP W/24”X100’ BELT 8-10 YD BATCHER, BELT (3) 450 BBL (85 TON) SILOS (4) 600 BBL (122 TON) SILOS (1) 1600 BBL (300 TON) SILO

Stephens Eagle

NEW & REBUILT Crusher & Screening Parts; Dodge & Falk shaft mounted & base mounted speed reducers. Call for complete listing, 845-691-2430

John - 816-830-6421 jmabry1818@sbcglobal.net

Moisture Probes Badger Meters

Ingersoll Rand Air Compressor - 15 HP, 240 Gal, 15 CFM NEMA4 Kit

Announcements

ADVERTISING DEADLINE AUGUST ISSUE Wednesday, June 29th

If you would like to place a classified ad please call Peg at

BELT SAMPLER that WORKS. e-mail swemec@winfirst.com for free DVD

Crushing Equipment

CAPITAL EQUIPMENT

SALE

Conveyors

1-800-836-2888

or email classified@leepub.com Announcements

Announcements

# # # # #

CHECK YOUR AD - ADVERTISERS should check their ads. Lee Publications, Inc. shall not be liable for typographical, or errors in publication except to the extent of the cost of the first months insertion of the ad, and shall also not be liable for damages due to failure to publish an ad. Adjustment for errors is limited to the cost of that portion of the ad wherein the error occurred. Report any errors to 800-836-2888 or 518-6733237 ext. 225

ADVERTISERS Get the best response from your advertisements by including the condition, age, price and best calling hours. Also we always recommend insertion for at least 2 times for maximum benefits. Call Peg at 1-800-836-2888

Drilling Equipment REMAN 900/350 HR2 air end complete. $32,500 includes refundable core charge up to $6,500. View at w w w. r o c k d r i l l s a l e s . c o m Please call Chip or James 770-483-0788

www.equipmentexplorer.com • Search All of our Auction and Used Equipment Ads at One Time! Auction and Used Equipment Ads from:

• Country Folks • Country Folks Grower • Hard Hat News • North American Quarry News and • Waste Handling Equipment News

Financial Services

are combined into our searchable database.

FINANCING NEW AND USED EQUIPMENT.

www.equipmentexplorer.com

NO FINANCIALS REQUIRED UP TO $50,000. 1-877-439-1534 Blue Bridge Financial, LLC jgallo@bluebridgefinancial.com

Generators GENERATORS:15kw-2500kw Diesel, Natural Gas & LP. All low hour gensets. We ship nationwide! 701-797-4766 www.abrahamindustrial.com (inventory online)

Generators

Parts & Repair

PARTS

* Caterpillarr Engine/ IPD D Kitss * * Transmissions* *Final Drives* *Hydraulic Pumps* *All Excavator Parts* *Under Carriages* Revettee New/Used d Parts

PH: 607-754-3287 Cell: 607-427-9857 catpillar3@aol.com

Generators

WABASH SELLS & RENTS BOILERS & DIESEL GENERATORS FAST EMERGENCY SERVICE

800-704-2002

FAX: 847-541-1279 • 847-541-5600 www.wabashpower.com

wabash

444 Carpenter Avenue, Wheeling, IL 60090

NEED BUSINESS CARDS? Full color glossy, heavy stock. 250 ($45.00); 500 ($65.00); 1,000 ($75.00). Call Lee Publications 800-218-5586 and ask for Beth or 518-673-0101 bsnyder@leepub.com

Drilling Equipment

www.rockdrillsales.com

Parts & Repair

Real Estate For Sale MISSOURI QUARRY & SAND PLANT – 409 acres w/289 acres leased w/25 yrs remaining on lease. 60 ft layer of state approved concrete rock, asphalt rock & commercial rock. All state permits in place. 50 acres reserves of river sand. Crushing system in place w/2 deck power screen & wash plant. Adjoins but not included in sale – ready mix plant & asphalt plant creating steady sales for both the quarry & sand plant. $

7,800,000

UNITED COUNTRY 1-800-999-1020 Ext 863 www.unitedcountry.com/qn

To Settle Estate FIVE (5) SLATE QUARRIES On a Total of 143 Different Acres

OWNER FINANCING AVAILABLE TO QUALIFIED BUYER Woodland Realty 421 County Route 11 Whitehall, NY 12887

518-282-9432 Real Estate Wanted

call (770) 483-0788

WE BUY ACTIVE & inactive quarries nationwide. Cash buyer. Fast close. Will assume environmental & reclaimation responsibilities. Call Steve Collins at 314-835-1515 x 107

800-836-2888 • Fax: 518-673-2381 • e-mail: classified@leepub.com Software

Software

Calendar of Events QUARRY NEWS E-mail announcement of your upcoming event(s) to: jcasey@leepub.com We must receive your information, plus a contact phone number, prior to the deadline that’s noted under the Announcements heading on the 1st page of these NAQN Classifieds. *** JUL 8-10 Historical Construction Equipment Association 2011 Convention & Old Equipment Exposition I & I Tractor Club Show

Grounds, Penfield, IL. Demonstrations & displays of horse drawn, gas and diesel powered antique construction machinery, cable and hydraulic shovels, cranes, hit & miss engines,

antique trucks & tractors and displays by the Quonset Air Museum and the Navy Seabees Museum. It is open to the general public and everyone involved with the construction, mining & dredging equipment is especially encouraged to attend. Show hours are Fri., 9 to dusk; Sat., 9-5; Sun., 9-3. Admission per person 12 or over is $10 daily or $25 for a weekend pass. Call 419-3525616 or info@hcea.net. On Internet at www.hcea.net AUG 23-25 Northern Mine Rescue Association Regional Mine Rescue Contest Carmichael, PA. Contact Steve Allenson, steve_allenson@cargill.com. On Internet at www.msha.gov/MineRescue/CONTEST/2011MNM/L

ocalContests2011.asp SEP 7-9 Mining Electrical Maintenance & Safety Association Annual Technical Symposium Clearwater, FL. On Internet at www.miningelectrical.org memsa@tampabay.rr.com OCT 5-7 National Trailer Dealers Association 21st Annual Convention The Breakers, Palm Beach, FL. Contact NTDA, 800-8004552 or gwen@ntda.org. On Internet at www.ntda.org

5 EASY WAYS TO PLACE A QUARRY NEWS CLASSIFIED AD

1. PHONEJust ITgiveINPeggy- a call at 1-800-836-2888

IT IN 2. FAX For MasterCard, Visa, American Express

Place Your Classified Ad

24/7!

or Discover customers, fill out this form completely and fax to Peggy at (518) 673-2381

IT IN 3. MAIL Fill out the form, calculate the cost, enclose your check/money order or credit card information and mail to:

Quarry News Classifieds, PO Box 121, Palatine Bridge, NY 13428

IN 4. E-MAIL ITE-mail your ad to

classified@leepub.com

5. ON-LINE Now you can place your items or services for sale anytime from the convenience of your computer! You can even add photos, borders or attention-getters yourself. PREVIEW YOUR AD ONLINE BEFORE YOU PLACE IT!! Go to any of our publications’ web sites and follow the classified tab to place your ad www.countryfolks.com www.cfmanestream.com www.quarrynews.com

www.cfgrower.com www.hardhat.com www.wastehandling.com

Of Course you can always call our classified department at

800-836-2888 or email us at classified@leepub.com If your browser is not updated to it’s latest version you may not be able to take advantage of this offer. If you experience difficulty try one of our many other methods to place your classified ad... Fill out the form found toward the end of the classified section and mail it in to us...Email your classified ad to classified@leepub.com... Fax your classified ad to 518-673-2381 attention Peggy... Or simply give us a call at 800-836-2888.

Go to www.quarrynews.com and follow the Place a Classified Ad button to place your ad 24/7!

$15.50 $16.00

$16.50

$17.00

$17.50

$18.00

$18.50

$19.00

$19.50

$20.00

$20.50

$21.00

$21.50

$22.00

$22.50

$23.00

$23.50

$24.00

$24.50

FOR BEST RESULTS, RUN YOUR AD FOR TWO ISSUES!

Cost per issue: $15.00 for the first 14 words, 50¢ each additional word.

Name: (Print)_______________________________________________________________ Address:___________________________________________________________________ City:________________________________________St.:_________Zip:_______________ Phone:___________________________________Fax:______________________________ Cell:____________________________________E-mail:_____________________________ Payment Method: American Express Discover Visa MasterCard Acct#___________________________________________Exp. Date__________________ MM/YY

Signature________________________________________Date______________________ Required w/Credit Card Payment Only

Page 19 • North American Quarry News • July 2011

North American Quarry News Classifieds

July 2011 • North American Quarry News • Page 20

Over 400 hard hat workers rally at foot of U.S. Capital Bi-partisan group of senior members of Congress pledge to fight for new road building jobs this year WASHINGTON, D.C. — More than 400 union and non-union hard hat workers from across America and representing all parts of the road construction industry and related materials suppliers rallied on the National Mall in support of a multi-year surface transportation bill. Congressional and industry speakers told the cheering crowd the bill is needed to create tens of thousands of good paying, new American jobs in road construction. A bi-partisan group of senior members of the House and Senate addressed the cheering crowd. “Some in Congress are

saying you need to do more with less. Everyone here today knows that we need to be investing more, not less if we are to keep pace with China, with India, and with our international competitors. What you get with less is less,” said Congressman Nick Rahall, ranking member of the House Committee on Transportation and Infrastructure. The rally was sponsored by ten associations in the road building industry and their suppliers led by the National Stone, Sand and Gravel Association (NSSGA) and the National Ready Mixed Concrete Association (NRMCA). “Only passage of a well funded, multi-year highway reauthorization bill can alleviate

the uncertainty that plagues our industry from hiring new employees and purchasing new equipment, and prevents state DOTs from undertaking long term projects, which ultimately threatens America’s economic recovery and growth,” said Dave Thomey, executive vice president, Maryland Materials and chairman of NSSGA. An estimated 35,000 jobs are created by every one billion of new federal highway investment. In addition to the long term benefit to the economy, federal highway investment will have the short term benefit of helping speed the economic recovery. “The concrete reinforcing steel industry has dropped from a prerecession quantity of

approximately 10 million tons in 2007 to 6 million tons in 2010, a 40 percent drop. A six year surface transportation bill is the only way we can put people back to work,” said Bob Risser, president and chief executive officer of the Concrete Reinforcing Steel Institute. “The National Ready Mixed Concrete Association is proud to be a part of this important

coalition rallying for roads. Investment in the nation’s infrastructure is of vital importance to our economy and we urge Congress to pass a robust multi-year highway bill that will put people back to work and improve safety on our nation’s roads,” said Karl Watson, president of Cemex USA and chairman of NRMCA. Additional sponsors of the “Rally for Roads” in-

clude American Concrete Pavement Association, American Council of Engineering Companies, American Road & Transportation Builders Association, Associated Equipment Distributors, Concrete Reinforcing Steel Institute, International Safety Equipment Association, National Asphalt Pavement Association and Portland Cement Association.

Congress tosses 1099 reporting requirement After months of back and forth arguments, Congress has finally sent legislation to the president’s desk repealing the onerous 1099 reporting requirement from last year’s health care law. On April 5, the Senate approved, 87-12, the Comprehensive 1099 Taxpayer Protection and Repayment of Exchange Subsidy Overpayments Act (H.R. 4). The Senate’s actions came more than a month after the House had passed the bill. President Obama is expected to sign H.R. 4 into law in the coming days. H.R. 4 is the first piece of legislation

repealing any portion of the health care law to make it through both the House and Senate. Since the Patient Protection and Affordable Care Act was enacted last year, AED and our partners in the Small Business Coalition for Affordable Health Care have made 1099 repeal a top priority. The burdensome mandate would have forced companies to report every transaction with an outside vendor totaling more than $600 on an IRS Form 1099 beginning in 2012. AED congratulations everyone who took the time to contact lawmakers via aedaction.org in support of 1099 repeal.

The rally was sponsored by ten associations in the road building industry and their suppliers, led by the National Stone, Sand and Gravel Association (NSSGA) and the National Ready Mixed Concrete Association (NRMCA).

RockFrac® Rock Splitting Mortar is the answer when your job calls for the demolition of rock or concrete by non-explosive or low vibration means. Rock Outcroppings, Boulders or reinforced concrete can be easily split and fractured, speeding its removal. • Eliminate: vibration from blasting, fly rock, permitting, seismic and explosives monitoring. • Minimize vibration from large breakers. • Exploits the Tensile strength of even the hardest rock. • Reduces removal time, saving time and money. • The Fracturing increases productivity of equipment. • Environmentally friendly.

- Safe and Easy to Use - Economical - Reliable ENTERPRISING EUROPA, INC., 439 ROUTE 17N, MAHWAH, NJ 07430 USA PHONE: 201-236-0969 FAX: 201-584-0229 WEB SITE: ROCKFRAC.COM EMAIL: INFO@ROCKFRAC.COM

For more info, go to the WHEN Advertisers' Directory at www.wastehandling.com

Page 21 • North American Quarry News • July 2011

Major Wire introduces 1x2 modular panels with vibrating wire Flex-Mat 3 advanced technology CANDIAC, QUEBEC, CANADA — Montreal based Major Wire Industries Limited starts introducing its full line of new 1-foot x 2-foot Flex-Mat® 3 self-cleaning polyurethane modular screen media panels this spring. This new screen media size fits virtually any flat surface screen deck, so screening operations using traditional 1foot x 1-foot and 1-foot x 2-foot polyurethane and rubber panels can increase their existing screening capacity and

in-spec material throughput up to 50 percent. Screening operations can choose between snap, step, pin and grooved types in opening sizes of 30 mesh, or 0.020-inches, up to 1-1/2-inches. Proven Flex-Mat 3 Modular 1-foot x 1-foot panels were introduced earlier in 2007. Both Flex-Mat 3 Modular’s 1-foot x 1-foot and 1foot x 2-foot panels provide up to 50 percent more screen open area than traditional rigid polyurethane and rubber

panels. In addition, each new 1-foot x 2-foot FlexMat 3 Modular panel increases total screen media open area by 4.6 percent when compared to using two 1-foot x 1-foot panels to cover the same screen deck area. No screen box changes are necessary to switch to the larger panels. One key to Flex-Mat 3’s success in both tensioned and modular screen media is its independently vibrating wires that increase product throughput over traditional rigid

polyurethane and rubber panels by creating more screening action and eliminating blinding, pegging and clogging. By stretching the wire and using two different configurations of Major Wire’s signature lime green strips, the new 1foot x 2-foot modular panels employ the same independently vibrating wires without sacrificing wear life. For modular panels with wire diameters smaller than 0.135-inches, the wire is tensioned

Flex-Mat 3 Modular panels install easily using the same fastening systems as traditional polyurethane and rubber panels and are available in both stainless steel and Major Wire’s proprietary OptimumWire. and a polyurethane strip cluding aggregate, minis placed every 6-inches ing, sand and gravel, to ensure the wires inde- aglime, recycled concrete pendently vibrate. For and asphalt, C&D recymodular panels with larg- cle, coal, slag, talc, top er wire diameters, the soil, salt, mulch, induspolyurethane strips are trial minerals and green placed every 1-foot of the waste. non-tensioned wire so the Celebrating more than wires independently vi- 125 years in business, brate. Major Wire Industries Flex-Mat 3 Modular Limited designs, manupanels install easily using factures and markets the same fastening sys- screening solutions, intems as traditional cluding Flex-Mat® 3 high polyurethane and rubber performance, self-cleanpanels and are available ing screen media in Tenin both stainless steel sioned and Modular verand Major Wire’s propri- sions, OptimumWireÆ etary OptimumWire®. and stainless steel woven Wire diameters range wire cloth for the quarry, from 0.025-inches to mining, recycling and in3/8-inches. Snap and dustrial markets. For step types are available in more information, con1-foot x 2-foot sizes, while tact Major Wire Industhe pin and grooved types tries Limited, 225 North are available in both 1- Montcalm Blvd., Candiac, foot x 1-foot and 1-foot x Québec, Canada J5R 2-foot sizes. 3L6. Call 450-659-7681, Both Tensioned and fax 450-659-5570, e-mail Modular Flex-Mat 3 are major@majorwire.cc or ideal screening solutions visit its Web site at in many applications, in- www.majorwire.cc.

Cyclonaire C&C System collects and returns dust safely Automated C&C dust collect and convey system from Cyclonaire captures nuisance dust from silo filling operations and automatically sends it back to the source silo. Each unit mates an efficient pulse jet dust collector with a dense phase pneumatic conveyor and has onboard controls for automatic operation with no need to empty dust from the hopper. The C&C can be used to collect any dust. Because the entire installation is beside the silo at ground level, there is no need to climb to the top of the silo which maximizes safety. For more information contact Cyclonaire Corporation, 2922 North Division St., P.O. Box 366,

York, NE 68467-0366. Call 800-445-0730, 402362-2000, e-mail sales@cyclonaire.com or visit www.cyclonaire.com.

Cyclonaire C&C Systems are easy to install and maintain.

July 2011 • North American Quarry News • Page 22

Thompson Pump’s 2011 Pumpology School PORT ORANGE, FL — Thompson Pump & Manufacturing Co., Inc., held their 21st annual Pumpology® School at their corporate facilities in Port Orange, FL. Thompson Pump hosted more than 45 attendees from 16 states and two foreign countries. The three day workshop included training sessions for sales and service oriented professionals on pumping fundamentals, dewatering and bypass applications, selecting the correct pumping equipment, designing, installing and maintaining pumping systems, troubleshooting, pump maintenance and more. Pumpology School offers hands on demonstrations and classroom training from industry experts. Upon completion of training and successfully passing a comprehensive examination, attendees are recognized as certified Pumpologists® at an awards ceremony. “Pumpology School serves as a launching pad to help us form and continually develop lasting relationships with individuals and companies involved in a common industry,” said Bill Thompson, Thompson Pump president. “We enjoy bringing people together and furthering proactive education with the Thompson Pump team’s combined knowledge and experience in pumping systems throughout multiple applications, markets and territories. Our education provides students the tools to synthesize concepts into everyday functionality, integrating pumping fundamentals as a guideline for further expansion and elaboration of not only themselves but their company.” Thompson Pump is respected worldwide for its sophisticated heavy duty lines of high quality portable pumps, ranging in size from 2 to 18-inches and with capacities to 14,000 gallons per minute. Thompson Pump sells and rents their entire line of pumps to the areas of public works, municipalities, construction, agriculture, dewatering, mining, sewer/lift stations and water/waste water. Types of pumps engineered include wet prime trash pumps; dry prime trash pumps with compressor assisted or vacuum assisted priming

systems; sound attenuated pumps; utility trash pumps; diaphragm pumps; hydraulic power units with submersible pump ends; electric submersibles; rotary, vacuum and piston wellpoint pumps and high pressure jet pumps. With these different types of pumps, as well as a full complement of accessory hoses and piping, Thompson can offer the proper pump and system for any application. In addition, Thompson provides engineering services and special applications consulting for complicated wellpoint, bypass or multiple pump systems; and offers thorough pump and dewatering education and training through its Pumpology courses. Thompson Pump, a family owned company based in Port Orange, FL, is a full service manufacturer and provider of high quality pumps, pumping equipment and engineering expertise for the toughest dewatering, bypass and emergency pumping applications. Since 1970, Thompson Pump has assisted contractors worldwide with pump rental, sale, design, installation and operation. Thompson Pump operates sales, rental and service centers throughout the United States with 20 branches. The company is also aligned with more than 30 distributors in the United States, Canada and South America. Thompson Pump is a Blue Chip Enterprise Award winner and their products meet the requirements for certification as defined by the Contractors Pump Bureau. Thompson Pump holds numerous product patents along with the registered trademarks of Enviroprime®, Silent Knight®, and Arctic Knight®. The company achieved ISO 9001 quality certification for their Port Orange manufacturing facility. Thompson Pump is one of only a very few pump companies to have obtained ISO 9001 certification. The globally recognized certification was granted following independent testing and assessment of the company’s quality management systems and manufacturing capabilities. It is common to see Thompson’s pumps on some of the largest and

most challenging projects in the world. Whether the job requires cleaning up an oil spill in Alaska, raising a submarine in the Atlantic, moving an east coast lighthouse, fighting western fires, controlling floods in the Midwest, handling an irrigation project in Africa or dealing with a tragic disaster in New York, Thompson Pump is there. For more information, call 800-767-7310 or visit www.thompsonpump.com.

Thompson Pump hosted more than 45 attendees from 16 states and two foreign countries.

Powerful, fuel efficient Introducing the Lokotrack ST3.5 mobile screen The Lokotrack ST3.5 is the first of a new generation of Metso mobile screens built for maximum performance, efficiency and durability. The ST3.5 features re-engineered cooling and hydraulic systems for unmatched productivity and fuel economy, even in tough operating conditions. Contact your local Metso distributor to learn more about the new Lokotrack ST3.5. E-mail: minerals.nam@metso.com www.metso.com

ST3.5 Half Page.indd 1

4/20/2011 2:59:12 PM

INTRODUCING THE NEW FINLAY

C-1550 CONE CRUSHER! Our NEW Finlay C-1550 incorporates the

Features:

proven Terex 1300 (51”) Cone chamber

for fines by-pass/discharge.

Fuel efficient direct drive transmission via ‘wet’ plate clutch

Hydraulic relief system with automatic reset protects the chamber

that allows fines to by-pass the chamber reducing wear and overall running costs. This feature also allows users to direct feed from a Jaw crusher without the need for an additional scalping screen.

In-dependent Pre-screen with optional side discharge conveyor

from overloading and minimizes downtime. u

Metal detection system as standard with semi-automatic purge system for contaminants removal.

‘Garland’ style main conveyor rollers for maximum conveyor capacity and minimal belt tracking.

Visit Our NEW Web-Site www.terexfinlay.com Or follow us on:

Terex® Mobile Processing Equipment, USA Head Office. Keith McCann T +1 502 736 5260 F +1 502 736 5205 M +1 502 593 8016 Email: keith.mccann@terex.com Terex Finlay, 11001 Electron Drive, Louisville, Kentucky, 40299 USA © 2010 Terex Corporation. All rights reserved. Terex is a registered trademark of Terex Corporation in the United States of America and many other countries.

USAAdMay.indd 1

20/05/2011 14:28:39