Waste Handling Equipment News West 8.12

Stratford Baling is a “Crown Jewel” in Connecticut’s Murphy Road Recycling ~ Page 8

Volume 20 No. 10

C&D D Recyclingg Attachments, Pickingg Stations, Screens

August 2012

W

Page 2 • WASTE HANDLING EQUIPMENT NEWS WEST • August 2012

Hey Finance Guy, the Grinder Guy has a few questions…

I am always asked about financing and to be honest, as a Salesman, keeping one person as

your key go to guy, is difficult to do at best. If they are that on their game, they follow up, get the

best product for the customer and are generally a personable person, they usually don’t last long in

that position. Their superiors recognize their performance and off they go to greener pastures.

We found a good company and great guy last year and we’ve been working him hard. They have been a general pleasure to work with and the customers seemed pleased also. So we spent a few minutes with Mark Combs and Gary Bagwill of Snider Leasing of Sacramento, CA and asked them the questions I generally get asked that are never the same with Financial Institutions, but with this information, you can get a jump start on your financing and maybe some ideas to think about.

Q - What should a customer get together prior to calling for financing? Financial statements, tax returns?

A - Requirements for financial information will vary from one lender to another, and is often influenced by the amount of the request to be financed and the credit strength of the Applicant.

To use a standard rule of thumb, however, most lenders will be looking for the following:

A Credit Application; 2 years Profit & Loss Statements on the business and the principals of the company, (depending on whether or not the company is publicly or privately held); If the year-end of the business is more than 6 months old, an interim Profit & Loss and Balance Sheet will likely be desired; If the business financial statements are unaudited, corresponding Federal Tax Returns for the same 2 year period will likely be required; If the business is closely held, Federal Tax Returns on all principals will also likely be required.

Q - What are good rules of thumb for maximum finance amounts based on income levels?

A - The term of the financing will vary by lender, the type of equipment being financed, the age and useful life of the equipment and the financial and credit strength of the Applicants. Typical terms usually range for 24 months to 60 months.

Hey

7

August 2012 • WASTE HANDLING EQUIPMENT NEWS WEST • Page 3

TABLE OF CONTENTS ADVERTISE! September. . ADVERTISING DEADLINE: August 3 Crushing / Grinding / Screening / Shredding October. . ADVERTISING DEADLINE: September 7 Asphalt & Concrete Recycling - Shingle Grinders, Crushers, Screens Pre-Show: TCIA November. . ADVERTISING DEADLINE: October 5 Recycling Attachments & Carriers - Pedestal Breakers, Crushers, Shears, Grapples & More Annual Buyers Guide (Listing submission deadline 9/10/12) Show: TCIA Expo, November TBA December. . ADVERTISING DEADLINE: November 2 Land Clearing Equipment / Chippers, Grinders, Attachments, Biomass Energy

Ask the Grinder Guy . . . . . . . . . . . . . . . . . . 3

Classifieds. . . . . . . . . . . . . . . . . . . . . . . . . .19

New Millenium Rentals . . . . . . . . . . . . . . . .13

Stratford Baling is a “Crown Jewel” in Connecticut’s Murphy Road Recycling . . . 8

The Glass Gator from CEMCO PostScriptPicture ARRA.eps

Waste Handling Equipment News West

increases workplace safety . . . . . . . . . . . . 21

Volvo grader line . . . . . . . . . . . . . . . . . . . . . 17

Issn. 1085-7621

Page 4 • WASTE HANDLING EQUIPMENT NEWS WEST • August 2012

Waste Handling Equipment News is published monthly by Lee Publications P.O. Box 121, 6113 State Highway 5, Palatine Bridge, NY 13428 Standard Class Postage Paid at Palatine Bridge, NY 13428 POSTMASTER: Send address changes to: Lee Publications, P.O. Box 121, Palatine Bridge, NY 13428

Publisher. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Frederick W. Lee Vice President, Production . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Mark Lee Vice President & General Manager . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Bruce Button Editor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Jon M. Casey Editorial Assistant . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Kathleen Lee Comptroller . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Robert Moyer Production Coordinator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Jessica Mackay Page Composition . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Michelle Gressler Shop Foreman . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Harry Delong Subscriptions/Circulation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 888-596-5329 Classified Ad Manager - Peggy Patrei . . . . . . . . . . . . . . . . . . . . . . . . . . 518-673-0111 MAIN OFFICE: Palatine Bridge, NY 13428 518-673-3237 - FAX: 518-673-2381 Wendell Jennings (Sales Manager) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 518-673-0114 Lyndsay Bock (National) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 518-673-0115 Brian Johnson . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 518-673-0161 Mark Fowler . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 518-673-0116 Jan Andrews . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 518-673-0110 REGIONAL SALES OFFICES Kegley Baumgardner (Western VA) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 540-255-9112 Scott Duffy (NH, VT, ME) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 802-484-7240 Ian Hitchener (Baltimore, Delmarva Peninsula, Southern New England) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 518-210-2066 Wanda Luck (Carolinas). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 336-416-6198 Mark Sheldon (OH, PA) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 814-587-2519 Tina Krieger (National). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 518-673-0108 NATIONAL TRADE SHOW SALES Ken Maring, Trade Show Manager . . . . . . . . . . . . . . . . . . . . . . 888-355-5080 or 518-673-0103 Waste Handling Equipment News will not knowingly accept or publish advertising which is fraudulent or misleading in nature.The publisher reserves the sole right to edit, revise or reject any and all advertising - with or without cause being assigned - which, in his judgment, is unwholesome or contrary to the interest of this publication. Waste Handling Equipment News assumes no financial responsibility for typographical errors in advertisements; but, if at fault, will reprint that portion of the ad in which the error appears. Publisher accepts no financial responsibility for ads which do not appear due to any circumstance.

Cover photo: Mike Schauer, Site Manager; Sean Vasseur, Maintenance Manager; and Shane Carpenter, CBI-Inc. Sales Rep., outside the MR Stratford Baling volume reduction facility in Stratford, CT.

The Editorial Deadline precedes the Ad Deadline by two days. Waste Handling Equipment News readers include owners, operators, and purchasing agents involved in construction demolition, asphalt/concrete recycling, wood waste recycling and composting. Our editorial emphasizes new equipment, site stories, association updates, legislation and industry news.

If you have news to contribute, contact: Jon M. Casey, Editor Waste Handling Equipment News 6113 State Highway 5 Palatine Bridge, New York 13428 Tel: 717-258-6775 Fax: 518-673-2699 E-Mail: jcasey@leepub.com

August 2012 • WASTE HANDLING EQUIPMENT NEWS WEST • Page 5

Page 6 • WASTE HANDLING EQUIPMENT NEWS WEST • August 2012

Hey from 3 and a Rental Contract, as referenced above.

So for your next purchase, or lease, get some options that may benefit your tax position rather than just comparing rates because when it

comes down to the end of the year, we don’t care how much interest we paid, we care how much money we made. You can contact Mark Combs at 800-377-8812 or www.sniderleasing.com

for more information.

Also, 2012 is going by quickly. Your accelerated depreciation amount is at 50 percent this year and you still have your Section 179 Expensing for used equipment. You can

get more detailed information at www.depreciationbonus.org .

Questions, Comments, grinderguy@askthegrinderguy.com .

August 2012 • WASTE HANDLING EQUIPMENT NEWS WEST • Page 7

Weaker credits, weaker financial strength, etc. will typically only be considered for the shorter terms. Stronger Applicants can in some scenarios get terms of up to 84 months.

Q - What is an operating lease?

A - There are primarily 2 types of leases. Finance Leases and Operating Leases. There are even often variances of these which are interpreted differently from Lender to Lender but typically an Operating Lease if more oriented toward a structure that is considered “Off Balance Sheet” financing and does not typically lead to ownership of the equipment at the end of the contract. It is also subject to specific accounting and IRS requirements and guidelines and the payments are typically referred to as “Rental Payments” and are tax deductible. The Lender/Lessor takes the depreciation, not the Applicants. An Operating Lease is often more beneficial to Applicants looking for lower payments than traditional financing, unique tax advantages, (such as no Alternative Minimum Tax consequences) and better addresses the obsolescence factor regarding the equipment, since ownership may not be the desired goal at the end of the contract.

Q - Why is leasing better than purchasing — or not?

A - There are advantages and disadvantages to both traditional financing and leasing.

These will be established by the circumstances of the Applicant as outlined above. In addition to the advantages listed above, typically a lease will offer less initial capital expenditure than traditional financing and, in some cases, more flexible terms and structures.

Traditional financing may offer the benefit of a more accelerated writeoff under some circumstances, depending upon applicable IRS guidelines and opportunities. A lease may be less impacted by IRS regulations and consequences than traditional financing by virtue of nature/qualifications

Stratford Baling is a “Crown Jewel” in Connecticut’s Murphy Road Recycling

Page 8 • WASTE HANDLING EQUIPMENT NEWS WEST • August 2012

by Jon M. Casey From the time that Murphy Road Recycling acquired the Stratford Baling Volume Reduction Facility on Garfield Avenue in Stratford, CT, Director of Operations, Jonathan Murray and his staff have been making improvements to the site. Currently, it is one of the most modern and efficient dual stream recycling facilities on the East Coast.

Murray recalled the previous operation was being used as a transfer station for C&D waste and there was a single-stream paper recycling operation there as well. By the time that Murphy Road Recycling purchased the property in September, 2008, the facility had fallen into major disrepair. The surrounding community thought very poorly of what was there at the time. Overall, the facility was not up to the standards of excellence for which Murphy Road Recycling is known, so it was at this time that they considered C&D processing as a way to improve the efficiency of the facility.

“As a company, we had been in C&D recycling at some of our other locations like East Windsor and Waterbury since the 1980s,” he said. “There, we have been using Continental Biomass Industries, Inc. (CBI) equipment to grind wood for years. We had good experience with their equipment in the past. We operate a CBI 4600, an 8600 and a 4000 in addition to a CBI Shear. So, because of that relationship, we asked them to give us a design proposal for Stratford.”

“We liked what they came up with, and work on the new system began in late 2010,” he said. “With the permitting, clean up and fine-tuning at start up, it took us about 18 months to get the system on line.

Since then, the system has worked very well.”

Murray said that besides the installation of the new CBI system, they completely repaved the site and added a new inbound/outbound scale system in the process. They installed a new roof on the building and completely re-sided the structure as well.

Using a current expression, this was truly an “Extreme Makeover!”

“While we are located in an industrial park that is home to other heavy industries and trucking companies, we have residential neighbors adjacent to our property in the rear. We want to be a good neighbor,

Shane Carpenter, Stationary equipment sales representative for CBI, especially likes the way the sorted recyclables can be taken away through exterior access doors rather from inside the facility like many other designs. so as we developed our remodeling plan, we were always mindful of the people around us,” he said.

The new system provides both single and doubleground wood materials, for a variety of uses. They produce recycled wood products for mulch, biofuels, wood for pelletizing, and other ground wood products that consumers might need. Currently, there are three or four wood products being shipped.

Additionally, the facility produces recycled concrete material for local contractors who need a material as clean fill. Most of the paper material that once would have come to this location is taken to the Murphy Road Recycling facility in nearby Bridgeport,

CT. That site specializes in recycling paper waste.

Murray said they added a new baling system as a part of the improvement project. They are constantly baling the waste residue that is not recyclable. The bales are staged, and then transported to an approved landfill in Ohio, on a regular basis.

While Murray is busy overseeing other facilities in Murphy Road Recycling, the day-to-day operation of Stratford Baling is under the watchful eye of Site Manager, Mike Schauer. Mike is a long time employee with Murphy Road Recycling and does an excellent job of making certain the operation runs smoothly. Sean Vasseur serves as Mike’s right-hand

CBI-Inc. Processing System makes short work of C&D recyclables

Crewmembers await material coming down the main conveyor. man, working as an equipment operator and Maintenance Manager, a job that keeps him hopping all of the time. “We have an outstanding crew at this facility,” said Murray. “We appreciate all that they do for us there.”

As one of 15 facilities in the All American Waste/Murphy Road Recycling organization, the Stratford Baling operation has become a “Crown Jewel” within their system. “We are the largest private collection company in Connecticut,” said Murray. “We are looking to work together with the communities that we serve.

The Stratford Baling remodeling effort was no exception. We worked closely with our local officials.

They were very understanding of

what we were looking to accomplish. They worked with us every step of the way.”

Murray is excited about how well the improvements have gone.

Since sales and marketing of the recyclables is part of Murray’s responsibilities, he is looking forward to the continued growth of the operation especially with respect to the sale of the recycled wood products. “We have been extremely successful marketing the paper, plastic, metal and concrete materials and we are always looking for more customers, especially in the wood recycling segment of the business.” For more information about Stratford Baling, contact them at 800-9982984.

by Jon M. Casey When Murphy Road Recycling was looking for a turnkey system as an upgrade for their Stratford Baling Volume Reduction Facility, they looked to Continental Biomass Industries Inc. and Shane Carpenter for the expertise that they needed.

“We are very proud of this installation,” said Carpenter as we toured the Stratford, CT facility. “This is the first installation of its kind for our company where the sorted recyclables can be loaded and shipped from bins located on the exterior walls of the building,” he said. As he focused our attention to the series of overhead doors located between the exterior-mounted trommel and Magnum Force 8600 grinder, he noted, “As you can see, this makes the movement of recycled products quicker and safer since the trucks do not have to enter the building. That also allows for more infeed material on the interior floor for loading into the system.”

Carpenter said material flow is a simple one with a dual feeding system design, that provides optimum material sorting for producing quality end products. Incoming material is loaded into the infeed hopper and is conveyed up to an Action™, vibratory, tapered-slot screen. The screened, smaller material is conveyed up and outside to a trommel which screens desirable wood waste that collect in the hopper below, while overs from the trommel return inside the building and are discharged into the Action™, DenseOut separator and vibratory slotted screen unit. This system removes lighter material and discharges it onto one belt, while a parallel belt receives the heavier materials; generally concrete and brick.

Carpenter noted inside the Dense-Out separator, there are two air knives that work to remove the lighter material while the heavies end up on the smaller conveyor belt. “This unit works extremely well. We have seen great success with it.”

While this process is taking place, the overs from the initial tapered-slot screen continue up to the main picking conveyor where a team of workers removes all of the metal, plastic and other non-wood items.

The remaining wood moves on to the end of the belt, where it is dropped onto a belt that

feeds the primary, CBI Magnum Force 8600 HZ Hog horizontal grinder. Other wood waste that has been plucked from the belts by the crew and is dropped onto conveyers under the worker’s platform, feeds onto the belt that supplies material to horizontal grinder mounted outside the building.

Once the wood is ground, it then passes under a magnet to remove nails and other metal debris before being conveyed up to a second CBI Grizzly Mill. There, the material can either be re-ground to a more refined product, or it can be diverted and discharged into one of the exterior bins as a single ground product. If the wood is to be doubleground, it passes through the grizzly before being stockpiled in one of the covered material bins.

“We designed this facility with the ability to provide either single or double ground wood products, depending on what their customers are looking for,” said Carpenter. “The addition of conveyors under the work stations, to take wood waste from the picking site to the grinder, is a feature that makes this design more efficient when it comes to creating an end product. That makes this system somewhat unique in that way.”

As we finished our tour near the storage bins for ground wood material, we noticed that there were some additional wood waste items stored in one of the bins. “They sometimes take in larger items like these pallets,” said Carpenter. “Since we located the horizontal grinder outdoors, it gives them the ability to direct-load the HZ 8600 and grind wood materials that do not need to be sorted. Not only does that make the interior quieter and more dust-free, but it gives their crews the flexibility of grinding more kinds of wood waste material when it is available.”

Carpenter said CBI-Inc. is extremely proud of how well Stratford Baling and CBI worked together to make this project a success. “This was a team effort that came together and works extremely well,” he said.

“We like to think of this as a ‘Crown Jewel’ when it comes to a recycling system.” For more information on CBI-Inc., visit their website at www.cbi-inc.com or give them a call at 603-382-0556.

August 2012 • WASTE HANDLING EQUIPMENT NEWS WEST • Page 9

Page 10 • WASTE HANDLING EQUIPMENT NEWS WEST • August 2012

USED EQUIPMENT SHOWCASE Reaching recycling and aggregate industry professionals across the United States in one easy section.

This section is dedicated to used equipment and auctions ONLY! Looking g forr a e of piece equipment? s your Here’s e to o find d it! place

Looking g to o selll used d equipment? s yourr place e to o selll it!

Here’s

Forr Moree Information n Contactt Wendelll Jennings • 518-673-0114 Lee Publications, Po Box 121, 6113 State Hwy 5 Palatine Bridge, NY 13428

August 2012 • WASTE HANDLING EQUIPMENT NEWS WEST • Page 11

LC Whitford Equipment Co., Inc. 4316 Bolivar Rd. Wellsville, NY 14895

FOR SALES, PARTS AND SERVICE -1-800-321-3602

Web site: www.lcwhitford.com Email: sales@lcwhitford.com

Page 12 • WASTE HANDLING EQUIPMENT NEWS WEST • August 2012

Morbark

Timber Pro

Rayco

Barko

Okada

2006 John Deere 648G Series III 4x4 Skidder/Grapple - Call for Pricing

2008 Rayco Super RG50, Repo Machine, Only 171 hours!

Call for Pricing

2012 Timber Pro TL735-B New and Unused Ready for Work!

Call for Pricing

2002 Morbark Mountain Goat 20/36 Track Chipper with Loader, Cummins Diesel, Low Hours! - Call for Pricing

2006 Timber Pro 630B Feller Buncher w/ Rolly II Head Call for Pricing

2012 Morbark 30/36 Track Drum Chipper, Get the Job Done Right!

Call for Pricing

2012 Morbark Beever M18R Chipper, 213 HP Cat, Autofeed, Many Additional Options Call for Pricing

2000 Bandit 1400 Track Chipper, 14” Capacity, 2143 Hrs, Cab & Loader Call for Pricing

CHIPPERS 20122 Morbarkk Beeverr M15R Cat 142HP, New and Unused! . . . . . . . . . . . . . . . . . . . .Calll forr Price 20122 Morbarkk Beeverr M18R,, Cat 213HP, Tandem Axle - Nice! . . . . . . . . . . . . . . .Calll forr Price 20088 Mo orbarkk Tornadoo 15, 140-HP Deere Diesel, Winch, 1,000 Hrs., Real Workhorse! . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Calll forr Price 20066 Morbarkk Blizzardd 12 Auto Feed, Needed TLC and Got it Here! . . . . . . . . . .Calll forr Price 20044 Morbarkk Hurricane 18” Chipper, Tandem w/Winch, 180 CAT, Recent Trade In . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Calll forr Price 20011 Morbarkk Hurricanee 2400XL 18” Capacity, 180-HP Cummins, Nice Shape! .Calll forr Pricee STUMP GRINDERS Speciall Discountss onn Alll Inn Stockk Stumpp Cutterss - Calll Forr Price!

20122 Raycoo 1645SJRS - New Model - Has Swing Out Panel, 4x4, Blade, Trailer . . Calll forr Price

Morbark M.U.T., Comes with a FREE Stump Splitter too!

Call for Pricing

20122 Raycoo C-1000 LGP,, Forestry Mower, Predator Head, Kubota Diesel! . . . . . . . .Calll forr Price 20122 Raycoo 16355 Tracc Jr.,, 35-HP, Go Anywhere Machine, with or without Trailer! . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Calll forr Price MISCELLANEOUS Morbarkk “Mutt”” Forestryy Loader, Comes with Grapple & Stump Splitter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Calll forr Price FAE,, UML/SSLL 125, mower attachment, used . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Calll forr Price FAE,, UMM M EXX 125, mower attachment, used . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Calll forr Price Raycoo & Rockland log grapples, used . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Calll forr Price Davco mower attachment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Calll forr Priice Rotobec grapple with RT252 rotator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Calll forr Price Bobcatt LR5A landscape rake . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Calll forr Price

For Sales, Parts or Service Call 1-800-321-3602 or E-Mail: sales@lcwhitford.com

Demolition & Environmental Contractors find the specialized attachments they need at New Millennium Rentals, Inc.

by Jon M. Casey In the Demolition & Environmental Industries, contractors routinely take jobs that require specialized equipment that they may not have in their company fleet. With bid in hand, they set out to take down a structure that sometimes became more than they bargained for. It was because of situations such as these that Peter E. Menner, Founder

and President of New Millennium Rentals, Inc. of Florida, NY began renting specialized heavy equipment.

“We began as a specialized attachment rental company in 1999,” said Menner. “We wanted to be able to offer customers the kinds of equipment that they might not own for themselves but would need to fulfill a contract. I could see the need for a business like this, so

Peter E. Menner, President (left) and Daniel Coe, Sales Representative (right) work together to make sure that their customers have the equipment that they need.

At a jobsite in central Pennsylvania, New Millennium Rental's Komatsu PC400LC-7, outfitted with the Lemac 85-foot high reach demolition front with shear, begins taking down this retired factory.

I prepared a business plan that featured the business model that we work under today. It wasn’t long before we were serving customers, providing them with shears, concrete processors and specialized attachments for demolition, environmental, and recycling Industries.”

Menner said he realized the need for

this kind of company during the nearly 10 years he spent as a territory manager for an equipment dealer in southern New York. “There was always a shortage of ‘out of the ordinary’ attachments,” he said. “We were able to provide bucket

Demolition 14

Grinder Sale

Year

Make

2006 2006 2002 1998 1997 (3)

Vermeer Vermeer Vermeer Morbark Morbark Vermeer

Model

Serial #

2006 Vermeer TG7000

Hours

TG7000 00123 1433 TG525 00237 TG400SOLD00528 1200XL 67467 4290 2348 SOLD00117 9900 TG7000’s Call For Price

Stu 630-986-6018 Darin 309-208-4568

Price

Summer Deals

Stewart 517-206-5512

Financing Available

$425,000 $180,000 $130,000 $98,000 $78,400

Location

Fishers, IN Aurora, IL Aurora, IL Ft Wayne, IN Eureka, IL Aurora, IL

Contact

Gary Stu Stu Gary Darin Stu

Greg 314-960-0920 Gary 317-509-3278

August 2012 • WASTE HANDLING EQUIPMENT NEWS WEST • Page 13

2006 Vermeer TG525

Demolition from 13 machines, but if a customer was looking for a shear or a hammer, we were not able to provide that unit and attachment combination. I set out to offer the unusual equipment through New Millennium Rentals. Today, a contractor can rent a specialty piece like our Lemac 85 ft high-reach demolition excavator, if they are looking to take down concrete and steel with precision.”

“Unlike many rental companies, we are not looking for the general equipment

rental customer,” he added. “We are here to help the contractor who understands the importance of the correct tool for the job with our kind of specialty equipment.

We emphasize the importance of renting our equipment as complete units, with the carrier and attachment all coming together as one item. We do not rent attachments by themselves.”

“As most Demo and Environmental

Demolition 17

New Millennium Rentals is equipped to take equipment to wherever it is needed.

www.aaauctionfinder.com

This LBX 350 excavator headed to a client in the Southeastern US, is outfitted with an amphibious undercarriage and a Pierce Pacific 60-foot, long-reach front. Units like this are ideal for marshy areas where conventional equipment is not suitable.

Search for all types of auctions at any time.

New w updatess alll the e time!!

Page 14 • WASTE HANDLING EQUIPMENT NEWS WEST • August 2012

New and Used Recycling Equipment 2007 Vermeer TG7000 Approx. 2800 hours, Cat 3412E 1056HP, Very Nice! Good Condition! $399,000

2000 Morbark 3036 Good Condition, Ready to Chip! $105,000

1999 Morbark 5600 Cat 3412E Rebuilt Engine, New Feed Chains, VERY NICE MACHINE! - HOT DEAL!! $180,000

1999 Morbark 1300 Cat 3412E 860HP Engine, Approx. 600 Hrs on Cat Rebuild New Lower Price! Was $140,000 NOW $115,000

2004 Morbark 950 w/Coloring Unit, 200HP Approx. 305 hours - Excellent Condition!

Great Deal at $62,500

1997 Morbark 1200 NEW Cat 3412 650HP, New Clutch, New Slip Joint, Rebuilt Mill Excellent Condition! Was 159K Now $149,000

2007 Peterson Pacific 4700B Approx.

3500 Hrs., Shingle Pkg., New Mil Shaft & Bearings, Very Nice Machine! $35,900 OBO

2009 Morbark 3800T Cat 700HP w/Engine Warranty Remaining, Approx.

5500 Hrs, VERY NICE!!

New Lower Price! Was $325,000 NOW $320,000!!

2008 Doppstadt DW-3060K Slow Speed High Torque Shredder, Approx. 2000 Hrs on Rebuilt Engine, Excellent Condition! $355,000

2009 Rotochopper EC266 Electric Stationary Horizontal Grinder, All The Bells & Whistles. New Lower Price! $125,000

WE HAVE A HIGH DEMAND FOR TROMMEL AND VIBRATING SIFTING MACHINES - All Sizes 2000 Peterson Pacific HC5400 Lots of updates, good condition, ready to grind! . .$125,000 2000 Morbark 1200XLT CAT engine, approx 6400 hours, good working condition . .$165,000 2006 Vermeer TG7000 CAT 3412E, 1000HP, approx 6800 hrs, work ready . . . . . . .$299,000 1995 Bandit Beast 3680 Cummins 365HP engine, approx. 4400 hours, oil samples avail .$74,500 2010 Bandit Beast 3590 CAT C18 765HP, approx. 1200 hours, Good Condition! . . .$280,000 1993 Morbark 3036 CAT 300HP engine, compressor, many extras, nice straight machine! . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$62,000 2002 Vermeer HG525 CAT 525HP, many recent updates, very nice! $165,000 LOWER PRICE $150,000

2006 Vermeer HG6000TX Approx. 1900 hours, NEW lower price, WON’T LAST . . .$289,000 2006 Bandit Beast 4680 CAT 1000HP approx. 2200 hours, Excellent Condition! . . .$300,000 2003 Morbark 1300NCL CAT 1000HP engine, approx 4500 hours, Good Condition! $190,000 2003 Morbark 7600 CAT 3412E, 1000HP engine, approx 3000 hours, VERY NICE! .$275,000 2007 Morbark 2755 Chiparvester, approx. 3800 hours, VERY Good Condition! . . . .$499,000 2006 Vermeer HG6000 CAT C16, 630HP engine, approx 2800 hours . . . . . . . . . . . .$189,000 2004 Morbark 3600T CAT 525HP engine, approx 1000 hours, Lower Price! . . . . . .$229,000 2008 Morbark 4600XLT CAT C27, 875HP, Tier 3, approx 1800 hours . . . . . . . . . . . .$410,000

Have a Grinder, Chipper or Trommel Screen you would like to sell?

We can help! Give us a call Toll Free 888-680-3433 Call or Visit us online to see more equipment & pictures

primarymachinery.com

P.O. Box 4613, Salem, OR 97302

Office 503-588-8312 • Toll free 888-680-3433 • Cell 503-602-3433 michael@primarymachinery.com

Work Tools for Scrap & C&D Recyclers

24v DC Battery Operated Magnet Inexpensive, easy installation and low maintenance

No Generator Needed

with or without electromagnets.

For material handlers, excavators, mini-excavators, and knuckle boom cranes

Powerful Mobile Hydraulic Shears

Fixed Pulverizer

4 sizes available, reversed cylinder to protect rod, easy change teeth, cutting blade

With or without rotation from 1 to 10 ton size

Self Contained Hydraulic Magnets Easy install on Multiple Machines

Rotating Pulverizer

Track Pads Bold-on, Mold-on, Clamp-on.

Rubber and Poly in-stock

5 sizes available, reversed cylinder to protect rod, cutting blade, Oversized rotation motor

www.MoleyMagneticsInc.com 716-434-4023 or cell 716-417-2591

Floor Area C

August 2012 • WASTE HANDLING EQUIPMENT NEWS WEST • Page 15

Grapples

Leading r Value Shea

OCTOBER

OFFICIAL HAPPY HOUR SPONSOR HAMMEL NEW YORK

24-25

2012 Wed. 9-5 & Thurs. 9-5

Henrietta Dome • Monroe County Fairgrounds 2695 East Henrietta Road Henrietta, NY 14467

Page 16 • WASTE HANDLING EQUIPMENT NEWS WEST • August 2012

Indoor Displays and

LIVE DEMOS Recycling Machinery and Forestry Processing Equipment!

FREE ADMISSION!* * $10 Parking Fee

Don’t Miss These Exhibitors...

Allu Group Inc • Demo Area 6 Apollo Equipment.net, LLC • 24 Emerald Equipment Systems, Inc • 23 George & Swede Sales & Service • O-4, O-5 Grinder Wear Parts, Inc • 24 Hammel New York, LLC • Demo Area 1 Hard Hat News • 102, 103, 104, 105 Land Improvement Contractors of America (LICA) • 40 Moley Magnetics Inc • C Nextire, Inc • 111 Nuwer Auto Parts • 118 Quality Craft Tools • A Sandvik Construction • Demo Area 2 More Coming In !!!

Produced by the Trade Show Division of Lee Newspapers, Inc.; P.O. Box 121, 6113 State Hwy. 5; Palatine Bridge, NY 13428. Publishers of WHEN, NAQN and Hard Hat News

Questions? Call 800-218-5586 or 518-673-0114

www.whenrecyclingexpo.com

Industry loses a good man The Recycling Industry has lost one of its best hydraulic minds in the country and one good person.

Eric Eskeland, Engineering Manager at Continental Biomass Industries Inc., was tragically killed in a boating accident on Memorial Day weekend.

Mr. Eskeland had been with CBI for the past decade and was one of best hydraulic engineers in the industry for years prior to

CBI. Known as “just a great guy” to friends, coworkers and customers alike, his hydraulic knowledge helped advance the automation of grinding and shredding processes that are being used daily by many customers in the industry today.

He is survived by his wife Debra, daughters Hilary and Heidi and son, Nathan, a Recycling Equipment Salesman at Continental Bio-

Eric Eskeland mass Industries, Inc.

Volvo grader line featured at this year’s World of Asphalt and AGG-1 Aggregates Forum

by Jon M. Casey Sean Glennon, vice president of Volvo CE Shippensburg Operations and Volvo’s Gary J. Atkinson, Segment Development Manager for Road, Quarry and Aggregate Products, were on hand for a walk-around inspection of Volvo’s G946B Motor Grader at the 2012 World of Asphalt and AGG-1 Aggregates Forum in Charlotte, NC, on Wednesday, March 14. For contractors who are looking for a motor grader that is able to perform according to today’s rigorous standards and at the same time, cost less to operate than most other manufacturer’s similar models, the G946B is certainly a grader that requires consideration.

Glennon was excited to say that the

plant expansion at the Shippensburg, PA, manufacturing plant and recentlydesignated North American Headquarters for Volvo CE, will give this facility the capability of complete manufacture and assembly of the 900 series motor graders. He said that some of the component parts are still being manufactured abroad then shipped to the plant for final assembly. In the future, everything will be U.S. made.

As we began our walk-around of the G946B, Gary Atkinson’s personal experience with the equipment made the experience extremely informative and interesting. His patient explanation of

Volvo 21

Demolition from 14 want a win-win situation for our customers and ourselves as well.”

Currently, New Millennium Rentals, Inc. serves the entire United States and Canada, with much of its business taking place in the northeast and mid-Atlantic regions. “We rent and sell equipment to businesses across the nation including the Tennessee Valley Power Authority and others. Our flexibility in adding new items to our inventory gives us a reputation for service that is the best. If a customer’s commitment warrants a move of that kind, we will work with them to provide them with the equipment that they need. That is often the way we acquire new systems to offer clients on future jobs. If we can make the numbers work, we will take on new specialty equipment as needed.”

For more information on New Millennium Rentals, Inc., contact Peter E. Menner at 1-877-667-1998 or online at: pemenner@newmillenniumrentals.com.

www. wastehandling. com

August 2012 • WASTE HANDLING EQUIPMENT NEWS WEST • Page 17

contractors realize, it is important not to cross-contaminate the hydraulic fluids from one unit to another,” he said.

“In this way, we maintain our systems on a regular basis, keeping the equipment operating safely and reliably. We change the hydraulic fluid every 1000 hours for optimum service. Additionally, with this procedure in place, the tools are always properly matched to their carriers.”

New Millennium Rentals, Inc. currently offers Link-Belt Excavators, Genesis Attachments and Toku, Breaker, Geith and Lemac brands. They offer carriers in the sizes that most contractors regularly use. By offering customers the many options that they do, contractors are not limited to the jobs that they can take on, when it comes to equipment capabilities.

“I can give a customer the attachment and the carrier that is just right for that job,” said Menner. “With our experience, we are an excellent resource for our customers.”

“We are always looking for new kinds of specialty attachments to add to our fleet,” he said. “If a contractor has a need for an item that we don’t currently have available, we are willing to consider adding it to our line of equipment. We have testing procedures in place to confirm that new product performs as advertised. If they don’t, we do not offer them as part of our rental service. We

Page 18 • WASTE HANDLING EQUIPMENT NEWS WEST • August 2012

To Place A Classified Ad Phone 1 (800) 836-2888 • Fax (518) 673-2381 • E-mail: classified@leepub.com

WASTE HANDLING EQUIPMENT NEWS CLASSIFIED SECTION Waste Mailing Address - Waste Handling Equipment News Classifieds, PO Box 121, Palatine Bridge, NY 13428 Announcements

Announcements

Lumber & Wood Products

ADVERTISING DEADLINE

Parts

Services Offered

TROMMEL BRUSHES

WEDDING INVITATIONS printed and designed by Lee Publications: 100 (4.5x6) Invitations including envelopes with 100 RSVP postcards.

Only $150.00 +tax. We can also do smaller and larger amounts. Call for pricing and designs 518-673-0101, or bsnyder@leepub.com Also Save the Dates • Shower Invitations • Baby Announcements and more.

SEPTEMBER ISSUE Friday, August 3rd

Mfg. By

DUFF BRUSH LLC Powerscreen, Wildcat, McCloskey, Retech & Others

If you would like to place a classified ad - please call Peg at

1-877-863-3319

1-800-836-2888

www.duffbrush.com

or email classified@leepub.com Real Estate For Sale Announcements

Announcements

CHECK YOUR AD - ADVERTISERS should check their ads. Lee Publications, Inc. shall not be liable for typographical, or errors in publication except to the extent of the cost of the first months insertion of the ad, and shall also not be liable for damages due to failure to publish an ad.

Adjustment for errors is limited to the cost of that portion of the ad wherein the error occurred.

Report any errors to 800-836-2888 or 518-673-0111

NEED BUSINESS CARDS? Full color glossy, heavy stock.

250 ($45.00); 500 ($60.00); 1,000 ($75.00). Call your sales representative or Lee Publications 800-218-5586 and ask for Beth or 518-6730101 bsnyder@leepub.com

Construction Equipment For Sale CAT 508 cable skidder, Bobcat 175 & 843 skid loaders.

Martinsburg, PA. 814-7934293

ADVERTISERS

Lumber & Wood Products

Recycling Equipment

Recycling Equipment

SORTING TABLES

# # # # # Get the best response from your advertisements by including the condition, age, price and best calling hours.

Also we always recommend insertion for at least 2 times for maximum benefits. Call Peg at 1-800-836-2888

SCRAP YARD for sale in South Arkansas. Land, buildings, equipment and inventory. Call 870-314-0155

Jewelers Beautiful Custom Designed Gold or Silver Masonic Rings.

Made by a Brother for a Brother. Jonathan’s Jewelry, 417B East Main Street, North Wilksboro, NC 28659. Phone 336667-0144

Lumber & Wood Products

WANTED

ANTIQUE TIMBERS & BOARDS Yellow Pine, Cypress, Fir, Oak.

(512) 328-8837

WHAT ITS WORTH, INC. AUSTIN, TX

For C&D - Shingles - Green Waste Portable or Stationary CUSTOM BUILT

Brad Kiecker 612-889-7883

www.kafkaconveyors.com

HELP!!!!

Grinder Guy Is Looking For Used Equipment - Powerscreen Titan or Similar w/Open Hopper or Double Deck - Rotochopper CP118, Like New if Possible

813-421-2757

grinderguy@askthegrinderguy.com

WANT TO PLACE A CLASSIFIED AD? CALL: 1-800836-2888 CANVAS PRINTS: All sizes.

Mounted or Unmounted. Just bring in or send us your photo at Lee Publications. Call 518673-0101 bsnyder@leepub.com

August 2012 • WASTE HANDLING EQUIPMENT NEWS WEST • Page 19

Number / Classification 20 Air Compressors 25 Air Tools 55 Appraisal Services 60 Asphalt Equipment 65 Asphalt Recycling 70 Attachments 80 Auctions 85 Backhoe/Loaders 150 Buckets 165 Business Opportunities 200 Chippers 220 Compaction Equipment 225 Composting Equipment 245 Concrete Products 250 Concrete Recycling 255 Construction Demolition 265 Construction Eq. For Rent 270 Construction Eq. For Sale 275 Construction Machinery Wanted 300 Conveyors 310 Cranes 320 Crushing Equipment 365 Demolition 375 Dozers 400 Drills 415 Employment Wanted 425 Engines 430 Excavators 470 Financial Services 495 For Rent or Lease 505 Forklifts 535 Generators 550 Gradalls 555 Graders 610 Help Wanted 635 Hoists 705 Legal Notices 745 Loaders 760 Lumber & Wood Products 780 Maintenance & Repair 805 Miscellaneous 880 Parts 890 Pavers 912 Point Of Sale 925 Pressure Washers 940 Quarry Equipment 950 Real Estate For Sale 955 Real Estate Wanted 975 Rentals 1017 Scrapers 1020 Screening Equipment 1040 Services Offered 1065 Skid Steer Loaders 1085 Snowplows 1105 Sweepers 1120 Tools 1130 Tractors 1140 Trailers 1145 Training 1170 Truck Parts & Equipment 1180 Trucks 1185 Used Equipment 1205 Wanted 1230 Wood Waste Grinders 1235 Wood Waste Recycling

To Place A Classified Ad Phone 1 (800) 836-2888 • Fax (518) 673-2381 • E-mail: classified@leepub.com

WASTE HANDLING EQUIPMENT NEWS CLASSIFIED SECTION Waste Mailing Address - Waste Handling Equipment News Classifieds, PO Box 121, Palatine Bridge, NY 13428 Trucks

Trucks

Wood Waste Grinders

Martin’s Farm Trucks, LLC

Trucks for All Your Needs - Specializing in Agri-Business Vehicles

1989 Ti-Brook 39’ Frameless Alum 1988 Mack R690T SA Roll Off Truck, Dump Trailer, Air Susp, Closed E6-250hp, 5spd, Spring Susp, Double Tandem, 102” Wide, 60” Sides, Roll Frame, Extendable Tail on Rolloff Tarp, Chute, Two Way Tailgate $12,900 22’ cans $14,900

Wood Waste Grinders

2000 Duratech Tub Grinder 3406 Cat Motor, Pinal Hitch, Hydraulic Fold Out Tail Conveyor, Remote Control, Extra Hammers GC. $69,000

Call 814-762-5296 - PA UNIVERSAL REFINER VERTICAL SHAFT GRINDERS

Calendar of Events WASTE HANDLING EQUIPMENT NEWS E-mail announcement of your upcoming event(s) to: jcasey@leepub.com We must receive your information, plus a contact phone number, prior to the deadline that's noted under the Announcements heading on the 1st page of these WHEN Classifieds. *** OCT 23-25 ISRI Board of Directors and Committee Meeting The Ritz Carlton, Cleveland, OH.

2000 Sterling 8500 3126 Cat, HD3560P Allison, Hend Spring, Quad Lock, Double Frame, 16/40 Axles, 25 Yard Heil Packer $22,500

2009 Mack Granite GU713, Mack MP8 455hp, Jake, 18spd, 18/58 Axles, Camelback, Double Frame, 141k Mi $79,900

888-497-0310 5 EASY WAYS TO PLACE A WASTE HANDLING EQUIPMENT NEWS CLASSIFIED AD IT IN 1. PHONE Just give Peggy a call at 3.

1-800-836-2888

2.

FAX IT IN For MasterCard, Visa, American Express or Discover customers, fill out the form below completely and fax to Peggy at (518) 673-2381

4.

5.

MAIL IT IN Fill out the attached form, calculate the cost, enclose your check/money order or credit card information and mail to: WHEN Classifieds, PO Box 121, Palatine Bridge, NY 13428

http://www.wastehandling.com

E-MAIL IT IN - E-mail your ad to classified@leepub.com ON-LINE - Go to www.wastehandling.com e a and follow the Place Classified d Ad button to place your ad 24/7!

FOR BEST RESULTS, RUN YOUR AD FOR TWO ISSUES!

Page 20 • WASTE HANDLING EQUIPMENT NEWS WEST • August 2012

650HP - Volvo Engine 600HP - John UR 92 Grinder Deere Engine - Demo Unit UR 82 Grinder - Rental Unit Price: $430,000 Price: $290,000 E-mail: theco@theco-inc.com Phone: 1-800-776-0335

$15.50 $16.00

$16.50

$17.00

$17.50

$18.00

$18.50

$19.00

$19.50

$20.00

DISPLAY ADS IN THE CLASSIFIEDS ARE $21.00 per column inch, $12.00 second zone. Maximum height 11 inches. No frequency or agency discounts. LINE ADS are one issue, $15.00 for 14 words, 50¢ each additional word. All rates are per insertion. Payment must be included with your order.

Name: (Print)_______________________________ Company Name:____________________________ Address:___________________________________ City:__________________St.:_____Zip:_________ Phone:_____________________________________ Cell:_______________________________________ Fax:_______________________________________ E-mail:_____________________________________

NOV 13-15 ISRI Safety and Environmental Council Meeting Drury Plaza San Antonio Riverwalk. Contact Anne Marie Horvath, 202-6628511 or e-mail annemariehorvath@isri.org.

A PICTURE IS WORTH A THOUSAND WORDS It’s easy and economical to add a picture to your ad!

For Information Call

1-800-836-2888

LETT USS DESIGNN ANDD PRINTT YOURR OWNN BROCHUREE ORR FORMS 4 to 48 Page Tabloids on Newsprint or Offset Paper • Spot Color and Process 4 Color Available 8 1/2 x 11 or 11 x 17 Single Sheets Printed One or Two Sides, Spot Color, Variety of Paper Colors and Weights and Folding is Available In Quantities from 5,000 to 100,000 We can work from your layout or provide a custom designed piece for you.

Let Us Take Out The Headache . . .

Let Us Take Out The Red Tape . . .

Let our expert and professional graphic department create the image you are looking for in all of your business forms, brochures, handouts, newsletters, payroll stuffers, invoice stuffers etc.

No more jumping from the printers to the mail room. No more cutting checks to several out-sourcers to complete one job.

Fast Turn Around On All Your Commercial Print Jobs.

Our fast and professional service will keep you on target.

No more missed deadlines, no more coordination problems.

Let our professionals get the job done...ON TIME!

We offer complete mailing services and mail processing including labeling, inserting and folding!

And All Without Breaking Your Wallet . . .

Call us for an estimate on your next job!!

Payment Method: AmericanExpress Discover Visa MasterCard Acct#_______________________Exp. Date______ MM/YY

Signature_____________________Date_________ Required w/Credit Card Payment Only

Lee Publications Job Printing Depart. 1-800-218-5586

PO Box 121, 6113 St. Hwy. 5, Palatine Bridge, NY 13428 518-673-3237 • 1-800-218-5586 • Fax: 518-673-2699

The Glass Gator from CEMCO, Inc. increases workplace safety and recycling capabilities BELEN, NM — CEMCO, Inc.’s Glass Gator offers restaurants, cafeterias, institutions, bottlers, recycling centers, bars and hotels an economical, powerful glass recycling tool that’s safe, transportable, compact and easy to use.

The Glass Gator quickly and efficiently turns waste glass into a 100 percent recyclable, cullet or soft edged sand byproduct, effectively reducing waste handling costs and minimizing glass related injuries.

Offering the ability to process up to 40 to 80 bottles per minute, the Glass Gator makes quick work of everything

from empty glass containers to broken shards of glass. The glass is quickly transformed from sharp hazardous material into rounded sand that is safe to the touch — significantly reducing glass related injuries which typically make up the largest number of Workmen’s Compensation claims in the bar and restaurant industry. Such injuries can result in lost wages, scheduling hassles, increasing workmen’s comp costs and — in extreme cases — legal fees and substantial medical bills. Additionally, the machine itself is safe and easy to operate, whether fed by conveyor or hand.

The hopper features strategically placed trap doors to prevent flying glass debris, and further enhance safety for the operator and bystanders.

In addition to increasing safety, the Glass Gator also significantly cuts waste handling costs and headaches.

Offering an eight to one size reduction, the Glass Gator efficiently crushes eight glass containers down to the equivalent size of just one container, thus reducing the frequency of waste removal. This volumetric reduction also decreases disposal and haulage costs by hundreds of dollars per month. To accommodate ap-

plications where larger pieces of glass may be required, the Glass Gator can be configured to different reduction sizes including 1/2-inch, 3/8-inch, 1/4-inch uniform cutlet or 1/8-inch minus sand.

The Glass Gator is both powerful and productive, yet compact and economical to own and operate, with an average electrical consumption of just 13 to 26 cents per hour. Available in two models, the GG1-00813 stands just under 29-inches tall, with an additional hopper height of 23.4-inches, and is driven

Glass Gator 22

Volvo from 17 the industry,” he added.

“We have engineered the engine transmission to be beneath the cab and ahead of the articulation hinge. This design puts the weight of the trans-

mission within the grader’s wheelbase. This provides more downward pressure on the blade for greater productivity. It also makes servicing the transmission easier. Oth-

er manufacturers have the transmission behind the engine, toward the tail end of the grader. Our exclusive location provides for greater cutting capability, increased steering

control and better stability on side slopes.”

As we moved to the rear of the grader, Gary highlighted the unique design of the grader’s cooling system and the plenum

dependently from the engine. That way, it saves on fuel and horsepower as well. It features a temperature control monitoring system that monitors ambient air temperature

The design of the Volvo G940B allows for improved grading on difficult terrain.

This 946 B Tier 4 motor grader from Volvo and made in Shippensburg, PA, is equipped with all-wheel drive.

Segment Development Manager, Gary J. Atkinson (L) and Volvo Construction General Manager Sean Glennon, participated in the 2012 AGG-1 event in Charlotte, NC. Photos by Jon M. Casey

chamber that houses the various coolers. He said the door-mounted cooling fan is reversible so the system is capable of cleaning itself of dust and debris that might accumulate in the radiators mounted in the sides and door of the plenum.

“We do not have a stacked cooler core system like other brands.

This greatly reduces the likelihood of trashing and overheating,” he emphasized. “There is a hydraulically-powered fan mounted on the exterior of the door that runs in-

as well as engine coolant and hydraulic system temperatures and operates when needed.”

There are numerous additional standard features and optional accessories available on the Volvo 900 series motor graders that provide the kind of individual customization that contractors are looking for when it comes to purchasing a new grader. For more information, visit the Volvo website at www.volvoce.com.

August 2012 • WASTE HANDLING EQUIPMENT NEWS WEST • Page 21

how systems worked and what might be important to a contractor who is looking for the various advantages that the G946B has to offer, made the time spent at this exhibit, most rewarding.

For example, Gary began by saying that the Allwheel Drive feature on this grader, gives the operator more grading power and control while performing on the job. He said that when the grader is equipped with the company’s 8 speed HTE840 transmission, the Volvo high torque All Wheel Drive System operates in forward gears 1-7 and reverse gears 1-4. And when equipped with Volvo’s exclusive 11 speed HTE1160 transmission, it operates in forward gears 1-10 and reverse gears 1-6. Additionally, it provides an additional 8500 pounds of rim pull. When fine grading is called for, the AWD system also provides the ability to fine grade in Creep Mode using only hydrostatic front wheel drive, between 0-4 km/h (0-2.5 mph), when desired.

Gary especially noted the location of the teeth on the outside of the circle of the blade, where this design feature gives the operator more torque when turning the blade while grading. He said that the dual gear Circle Drive System uses direct acting hydraulic power for increased turning and holding capability under full load. The Circle Drive System also uses two hardened drive pinions and is protected against impact damage by an overload relief valve as standard equipment.

“Our transmission placement is unique to

Glass Gator from 21

Page 22 • WASTE HANDLING EQUIPMENT NEWS WEST • August 2012

by a 1.5 horsepower NEMA Class C electric motor. The GG2-00838 features an overall height of 74-inches, and is powered by a 3 horsepower NEMA Class C electric motor. Both units are derived from CEMCO’s popular Aggregate Impact Crusher, and feature abrasion resistant castings and dynamic force of rotation for efficient, powerful operation.

Cost and time savings aren’t the only benefits of the Glass Gator. The byproducts produced can be sold to recycling centers, as well as utilized in landfills and aggregate operations. The permeability of glass sand is ideal for aggregate contractors, as it can improve the quality of gravel in an aggregate mix.

Some states even require that up to 10 percent reclaimed glass be blended with other aggregates in Class 5, 6 or 7 road base materials. Glass sand can also be used as a landfill cover, both to reduce the total volume of waste in the landfill site and to act as a dust control device.

Built for long, reliable life, the Glass Gator offers a screen capacity of up to 50,000 bottles, and a blade capacity of 100,000 bottles. The machine is also designed for

fast, simple maintenance.

Rotor parts and the sizing screen are easy to replace, and the unit can be quickly cleaned using a simple detergent mix.

The Glass Gator runs quietly — no louder than the sound of a typical conversation. The GG200838 unit uses a standard 35 gallon roll out cart. For added flexibility, it can be configured for conveyor feeding of multi-

ple bottles at once, or to be single-fed by hand.

CEMCO can customize this equipment to fit specific applications.

For 50 years, CEMCO, Inc. has been providing innovative solutions for a variety applications including recycling, crushing, CNC machining and robotic welding. CEMCO takes pride in providing quality customer service and will always go the ex-

tra mile to help customers solve problems.

For more information contact CEMCO, Inc., 80

Don Luis Trujillo Blvd., Belen, NM, 87002. Call 505-864-1200, e-mail sales@cemcoturbo.com,

visit the website at www.cemcoturbo.com or find the company on Facebook.

www. wastehandling.com

Equipment You Can Count On

The worldwide network of Vermeer dealers makes the difference - get to know your local dealer.

In the field or in the shop, nobody is more determined to see you succeed. Vermeer is an innovative leader in the manufacturing of underground and tree-care equipment. They can also be your most valued partner in your day-to-day operations.

Vermeer Is Your Total Solutions Provider

The GlassGator is available in two models depending on the volume of glass to be recycled.

Glass bottles are quickly ground into a safe, granular material.

Contact your dealer by calling 1-888-VERMEER, or visit the Web at www.vermeer.com VERMEER TEXAS-LOUISIANA www.vermeertexas.com

VERMEER MIDWEST INC. www.vermeermidwest.com

3025 N. State Hwy. 161 Irving, TX 75062 (972) 255-3500

222 E. Frontage Rd. Alamo, TX 78516 (956) 782-5580

4802 Baldwin Blvd.

Corpus Christi, TX 78408 (361) 887-8499

4455 Director Dr. San Antonio, TX 78219 (210) 337-7700

707 Access Rd. Kilgore, TX 75662 (903) 988-9868

1531 E. Farm Mkt. 1151 Amarillo, TX 79118 (806) 622-2407

21300 NW Freeway 290 Cypress (Houston), TX 77429 (218) 671-6000

3415 East Slaton Rd. Lubbock, TX 79404 (806) 745-1245

8272 Rushing Rd. Denham Springs, LA 70726 (225) 665-7900

1945 Louis Henna Blvd.

Round Rock, TX 78664 (512) 244-0505

16595 N I-35, Exit 347 Ross (Waco), TX 76684 (254) 829-9655

11220 Allisonville Rd. Fishers, IN 46038 (317) 842-1040

1801 179th St. North East Moline, IL 61244 (309) 751-9540

3310 W. Coliseum Blvd.

Fort Wayne, IN 46808 (800) 649-1157

Route 24 East Eureka, IL 61530 (309) 467-3716

3566 Citadel Cir. Newburg, IN 47630 (812) 490-4400

1005 Thorrez Jackson, MI 49201 (800) 336-3889

2801 Beverly Dr. Aurora, IL 60504 (630) 820-3030

1196 A. Franklin St. Marne, MI 49435 (616) 677-5900

VERMEER and VERMEER LOGO are registered trademarks of Vermeer Manufacturing Company in the US and/or other countries. © 2002 Vermeer Manufacturing Company. All Rights Reserved.

VERMEER MIDSOUTH INC. www.vermeermidsouth.com 3506 S. Arkansas, Russellville, AR 72802 (479) 968-3919 1919 N. Hearne Ave., Shreveport, LA 71107 (318) 678-1575 580 Jean Mary Ave. Springdale, AR 72762 (479) 361-9110 4622 Stadium Blvd.

Jonesboro, AR 72401 (870) 931-6900

August 2012 • WASTE HANDLING EQUIPMENT NEWS WEST • Page 23

LANDFILL

TRANSFER STATION

Reduce Volume and Increase Density

Page 24 • WASTE HANDLING EQUIPMENT NEWS WEST • August 2012

Demo Area 1

DEMOLITION WOOD SCRAP YARD CONTRACTOR PROCESSING

Lower Up Front Investment Lower Maintenance Costs than Hammer Mills

Minimal Maintenance Requirements

Visit Our Demo at the WHEN Recycling Expo in October 2012

Demo Area 1

A HAMMEL Shredder can be operated for far less than any other shredder! (incl. all wear parts, fuel, and fluids) Please contact us today to learn how we can help you make more $$$

631-218-2600 info@hammelny.com www.hammelny.com