Waste Handling Equipment News West 2.13 by Lee Publications

Biofuel market calls for more grinding power at Tidewater Green

No. 4

February 2013

Wood Woodd Wastee Recycling Metall Detection Magneticc Separation

W PRSRT STD US POSTAGE PAID UTICA, NY PERMIT #55

Volume 21

Page 2 • WASTE HANDLING EQUIPMENT NEWS WEST • February 2013

Hey Grinder Guy, are there any new equipment improvements in the industry I should look at? by Dave Whitelaw Good question. We are all busy. Trying to keep up with all the new designs and options for each piece of equipment is a daunting task. But maybe a new improvement that is insignificant to one recycler may be a major cost savings for another. With that in mind, throughout the coming year, I am going to try and do a better job of posting useful and significant improvements on my Askthegrinderguy.com blog. It seems the move toward more efficient electric powered machines continues. Fuel usage per unit has become the major cost factor for everyone. Thus, electric powered equipment is becoming an attractive option. In Oct at the WHEN Recycling Expo in Henrietta, NY, several grinder manufacturers were present. I spent a few minutes with Scott Harrington of Rotochopper discussing the new Rotochopper EC-366. It is Rotochopper’s third generation electric horizontal grinder that features a dual purpose design that can handle both wood and shingles. This unit improves upon their “perfect in one pass” design. After 15 years of electric grinder experience, improvements in wear liners, the unit’s conveyor system,

Morbark’s new grinder wear tips provide users with additional ground tonnage. in the ease with which the grinder is serviced and maintained, have reduced operating costs even further. For more information on the new EC-366, visit www.rotochopper.com Along the line of power sources for recycling equipment, the Komptech line of screeners and recycling equipment has expanded its hybrid power offerings to four product lines. Their Trommel screen and the Multistar screeners are

two of the product lines with available hybrid power. With onboard generators that use 1.5-2 gallons of fuel per hour while screening up to 600 yards per hour, fuel costs are greatly reduced. The Komptech units also come with an optional ground power plug so there is no need to run the generator at sites with available electric power. For more information visit www.Komptech.com or call 720-890-9090.

Morbark has designed a new grinder wear tip that provides a denser end product that renders 2-3 additional tons per load by cutting instead of grabbing the material. The new Razorback Insert can efficiently chop and break down palm waste, reduce wrapping, and increasing run time efficiency. The Razorback works best in medium contaminated materials. It is recommended

Grinder Guy 4

February 2013 • WASTE HANDLING EQUIPMENT NEWS WEST • Page 3

With the Global Equipment Monitoring System, The Sahara X series from Colorbiotics is able to work at optimum efficiency.

Tracbel becomes exclusive dealer for Precision Husky in Brazil Tracbel, one of the largest distributors of heavy equipment, forestry and agricultural machinery in Brazil, has signed a partnership with the U.S. company Precision Husky, world leader in equipment for extracting and recycling waste wood, as exclusive distributor of its products in Brazil. The objective is to meet the growing demands of the Brazilian timber market, offering a comprehensive portfolio of productive solutions at more competitive prices for the timber harvesting sector throughout the country. With the partnership signed, Tracbel expands its portfolio of one-stop productive solutions for the forestry sector according to Precision Husky’s Chairman and CEO, Bob Smith. As official distributor

for Precision Husky equipment, Tracbel will be even better equipped to serve strategic markets, such as pulp, paper, and to compensate the furniture market and sawmills, as well as service providers. “Tracbel has also become a benchmark in the forestry sector, offering clients and manufacturers a promising future in business and in after -sales service,” says Luiz Gustavo Rocha de Magalhães Pereira, vice president of the Tracbel Group. After 45 years of doing business in this market, Tracbel is structured to meet all the needs of the reforestation timber market. The company provides its clients with solutions for timber harvesting systems, with the sturdy forestry machinery, made

Page 4 • WASTE HANDLING EQUIPMENT NEWS WEST • February 2013

Grinder Guy from 3 for use in primary grind and regrind of oak, cottonwood, palm and green waste. The inserts provided an average wear life of 40 hours per side and are easily installed. They require no special bolts and can be removed for sharpening. Visit www.morbark.com or call Morbark Sales at 800831-0042. In other news, Colorbiotics introduced the Global Equipment Monitoring (GEM) System. The GEM system, developed for use with Colorbiotics Sahara X Series coloring equipment, is a fully customizable computer program that allows operators to automatically meter, monitor and verify colorant and water output. This program elevates the world’s most advanced coloring system to unparalleled levels of efficiency. The GEM system allows a single operator effortless control and monitoring capabilities of either one or several Sahara coloring units from one convenient portal. Therefore, an owner or manager can view the equipment operation in real time from an office chair and make necessary adjustments. For more information about Colorbiotics, Sahara X colorant equipment and GEM quality control

monitoring system, contact Colorbiotics at 888663-6980. In 2012, Amerimulch® introduced the Marksman™ Volume Measuring System. The Marksman is available in two models; Platinum and Gold. The Marksman Gold model constantly measures fluctuating production rates, then calculates and displays the corresponding colorant and water application rates per yard. It can be used on any color unit. The Marksman Platinum model only works in conjunction with the Amerimulch ColorTrom®. The Platinum has all the features of the Marksman Gold model but also automatically adjusts color and water rates. Both units offer the ability to view equipment operation from a PC, a Smartphone or a tablet PC. The operator does not need to make constant adjustments any longer. The Marksman System does it for them, automatically. How cool is that? For more information on Amerimulch and the Marksman Volume Measuring System, call 888-556-3304 or visit www.Amerimulch.com. Questions? E-mail Dave Whitelaw, the Grinder Guy at grinderguy@askthegrinderguy.com.

by Precision Husky. The full portfolio of Precision Husky products will be marketed, including world wide best selling equipment in the sawmill, timber harvesting and recycling lines; but the major focus initially will be on chippers and debarking equipment. For more than 49 years, Precision Husky’s goal has been to produce the best, toughest and

most complete forestry equipment in the world. Today the company’s catalogue includes more than 70 models of equipment for sawmills, timber extraction and waste wood recycling. It is recognized as a leader in the industry. Its 165,000square-foot plant in Leeds, has one of the biggest stocks of parts in the industry, so that it can provide a rapid re-

sponse to the needs of its customers and authorized distributors. Tracbel, which was founded 45 years ago, is one of Brazil’s biggest distributors of heavy equipment for various sectors, as well as machinery for use in forestry and agriculture. Tracbel operates in the southeastern region and in the states of Amazonas, Amapá, Roraima, Pará, Goiás, the

Federal District and Tocantins, with 26 locations in all. At present the company has about 850 staff.

Scrap & C&D Recycling Tools by Moley Magnetics.

Separator Magnets All sizes of Drum, Pulley and Cross Belt Magnets Available.

Electro or Permanent Magnet available. Please contact us for more information.

24V Battery Operated Magnets No generator needed. Runs off vehicle battery. Powerful Mobile Hydraulic Shears With or without rotation from 1 to 10 ton size.

Highest Quality Best Prices on the Market Fixed Pulverizer 4 sizes available, reversed cylinder to protect rod, easy change teeth, cutting blade.

Rotating Pulverizer 5 sizes available, reversed cylinder to protect rod, cutting blade, Oversized rotation motor.

Self Contained Hydraulic Magnets Easy install on Multiple Machines.

www.MoleyMagneticsInc.com 716-434-4023 or email: sales@moleymagneticsinc.com

Eriez® celebrates 65 years with Dominion-Carolina Sales, Inc. ERIE, PA — 2012 marks the 65th year of partnership between Eriez® and High Point, North Carolina based sales representative company Dominion-Carolina. “Eriez’ partnerships with a number of United States sales representa-

LANDFILL

tive companies go back more than 50 years, but our 65 year relationship with Dominion-Carolina is our longest,” explained Charlie Ingram, vice president of Sales and Marketing. The Eriez/DominionCarolina relationship

TRANSFER STATION

Reduce Volume and Increase Density

dates back to 1947 when Bob Merwin, son of Eriez founder O.F. Merwin, and Dean Thomas, a retired school teacher who ultimately formed DominionCarolina, initiated the partnership with a handshake. “To think Eriez was just a five year old

company when the partnership started is absolutely amazing,” said Ingram. “The fact that 2012 is the anniversary of Eriez’ 70th year in business as well as our 65th year with DominionCarolina makes both milestones more special.”

When Eriez and Dominion-Carolina began working together, Thomas worked for the Henry Hersey Company. Later, when Thomas was made partner, the manufacturers’ representative company was renamed the Hersey-Thomas Company.

DEMOLITION WOOD SCRAP YARD CONTRACTOR PROCESSING

Lower Up Front Investment Lower Maintenance Costs than Hammer Mills

Minimal Maintenance Requirements

Please contact us today to learn how we can help you make more $$$

631-218-2600 info@hammelny.com www.hammelny.com

February 2013 • WASTE HANDLING EQUIPMENT NEWS WEST • Page 5

A HAMMEL Shredder can be operated for far less than any other shredder! (incl. all wear parts, fuel, and fluids)

Thomas went on to form his own company, which eventually became Dominion-Carolina. Throughout the years, the relationship between Thomas and Eriez remained strong. Thomas stayed active in the business until his death in 1999. Dominion-Carolina remains a family business with Thomas’ stepson, Jeff Carr, today serving as president. Under Carr’s leadership, the company has expanded and opened branch offices in Richmond, VA, Rock Hill, SC and Smith Mountain Lake, VA. “We feel incredibly grateful and fortunate for this longstanding, successful partnership,” said Ingram. “While both companies have evolved and grown tremendously over the past 65 years, our relationship has remained solid.” According to Ingram, it’s the Eriez/DominionCarolina customers who enjoy the greatest benefits from the 65 year collaboration. He explains, “It’s uncommon to find a field sales organization with so much experience, even longer than most principal companies have existed. Their knowledge and experience is an invaluable asset to our mutual customers.” Eriez is recognized as world authority in advanced technology for magnetic, vibratory and inspection applications. The company’s magnetic lift and separation, metal detection, x-ray, materials feeding, screening, conveying and controlling equipment have application in the process, metalworking, packaging, recycling, mining, aggregate and textile industries. Eriez manufactures and markets these products through 12 international facilities located on six continents. For more information, call toll-free 888-300-ERIEZ (3743) within the U.S. and Canada. For online users, visit www.eriez.com or send e-mail to eriez@eriez.com. Eriez World Headquarters is located at 2200 Asbury Rd., Erie, PA 16506.

TABLE OF CONTENTS ADVERTISE! March. . ADVERTISING DEADLINE: February 1 C&D Recycling / Asphalt & Concrete Recycling Show: Hard Hat Expo, March 6-7, Syracuse, NY Show: National Demolition Association, March 23-26, San Diego, CA April. . ADVERTISING DEADLINE: March 1 Composting Equipment - Turners, Screens, Grinders, Chippers Pre-Show: Waste Expo May. . ADVERTISING DEADLINE: April 5 Screening Equipment / Crushing Equipment Show: Waste Expo, May 20-23, New Orleans, LA June. . ADVERTISING DEADLINE: May 3 Wood Waste Recycling - Grinding, Screening, Coloring, Biomass Energy

Grinder Guy . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Eriez celebrates 65 years with DominionCarolina Sales, Inc. . . . . . . . . . . . . . . . . . . . . . 5 Morbark, Inc. acquires Boxer Equipment from Mertz Manufacturing . . . . . . . . . . . . . . . . . . . . 8 Biofuel market calls for more grinding power at Tidewater Green . . . . . . . . . . . . . . . . . . . . 10-11 by Jon M. Casey

Instant tramp iron protection with the CH-800 series electric dump valve by Sandvik . . . . 19 Refinements to Vermeer’s WC2300XL whole tree chipper make it a winner . . . . . . . . . 22-23 by Jon M. Casey

Chipper assembly line mock-up gives visitors a closer look . . . . . . . . . . . . . . . . . . . . . . . . . . 24

Waste Handling Equipment News West Issn. 1085-7621

Page 6 • WASTE HANDLING EQUIPMENT NEWS WEST • February 2013

Waste Handling Equipment News is published monthly by Lee Publications P.O. Box 121, 6113 State Highway 5, Palatine Bridge, NY 13428 Standard Class Postage Paid at Palatine Bridge, NY 13428 POSTMASTER: Send address changes to: Lee Publications, P.O. Box 121, Palatine Bridge, NY 13428

Publisher. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Frederick W. Lee Vice President, Production . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Mark Lee Vice President & General Manager . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Bruce Button Editor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Jon M. Casey Editorial Assistant . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Kathleen Lee Comptroller . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Robert Moyer Production Coordinator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Jessica Mackay Page Composition . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Michelle Gressler Shop Foreman . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Harry Delong Subscriptions/Circulation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 888-596-5329 Classified Ad Manager - Peggy Patrei . . . . . . . . . . . . . . . . . . . . . . . . . . 518-673-0111 MAIN OFFICE: Palatine Bridge, NY 13428 518-673-3237 - FAX: 518-673-2381 Wendell Jennings (Sales Manager) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 518-673-0114 Barbara Rivera . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 518-673-0135 Jan Andrews . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 518-673-0110 REGIONAL SALES OFFICES Kegley Baumgardner (Western VA) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 540-255-9112 Scott Duffy (NH, VT, ME) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 802-484-7240 Ian Hitchener (Baltimore, Delmarva Peninsula, Southern New England) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 518-210-2066 Brian Johnson (Eastern New York) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 518-673-0161 Wanda Luck (Carolinas). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 336-416-6198 Tina Krieger (National). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 518-673-0108 NATIONAL TRADE SHOW SALES Ken Maring, Trade Show Manager . . . . . . . . . . . . . . . . . . . . . . 888-355-5080 or 518-673-0103 Waste Handling Equipment News will not knowingly accept or publish advertising which is fraudulent or misleading in nature.The publisher reserves the sole right to edit, revise or reject any and all advertising - with or without cause being assigned - which, in his judgment, is unwholesome or contrary to the interest of this publication. Waste Handling Equipment News assumes no financial responsibility for typographical errors in advertisements; but, if at fault, will reprint that portion of the ad in which the error appears. Publisher accepts no financial responsibility for ads which do not appear due to any circumstance.

Classifieds . . . . . . . . . . . . . . . . . . . . . . . . . . . 26 Cover photo: The Tidewater Green crew poses for a photo in front of the company’s new Rotochopper B66. Shown L-R: Back Row — Josh Desnoyers, Brian Goller, Josh Vaughn, Bill Evans, Allen Boyer, and Matt Brown. Front Row — Kelly Kaczmar, Andy Warren, Richard Cameron, Tim Coggins and Autumn Biniecki.

The Editorial Deadline precedes the Ad Deadline by two days. Waste Handling Equipment News readers include owners, operators, and purchasing agents involved in construction demolition, asphalt/concrete recycling, wood waste recycling and composting. Our editorial emphasizes new equipment, site stories, association updates, legislation and industry news. If you have news to contribute, contact: Jon M. Casey, Editor Waste Handling Equipment News 6113 State Highway 5 Palatine Bridge, New York 13428 Tel: 717-258-6775 Fax: 518-673-2699 E-Mail: jcasey@leepub.com

THE HARD HAT EXPO PRESENTS

MARCH 6-7, 2013

Wed. 10AM-7PM • Thurs. 9AM-4PM NYS Fairgrounds Syracuse, NY

SKID STEER RODEO TH WEDNESDAY, MARCH 6 SIGN UP : 10am -1pm in the Hard Hat Booth located in the Center of Progress Building

FORMAT: RODEO RUNS FROM 1pm to 3pm. Trophy/Prize Ceremony will be held at 3 pm in the Hard Hat Booth

COMPETE E FOR R GREAT S & TROPHIES PRIZES

SEE THEM IN BOOTH A-17 & A-18

SPONSORSHIPS AVAILABLE !! No Fee To Register • Must Be at least 18 years of age and bring proof of ID

FOR MORE INFORMATION CALL 1-800-218-5586

February 2013 • WASTE HANDLING EQUIPMENT NEWS WEST • Page 7

CAZENOVIA EQUIPMENT PLATINUM SPONSOR

Page 8 • WASTE HANDLING EQUIPMENT NEWS WEST • February 2013

Morbark, Inc. acquires Boxer Equipment from Mertz Manufacturing WINN, MI — Morbark®, Inc., a leading manufacturer of tree care, sawmill, recycling, forestry, biomass chipping and grinding equipment, announced that it has completed the acquisition of Boxer Equipment, a product line of Mertz Manufacturing, LLC (Mertz), that manufactures and globally markets a full line of compact utility loaders (also known as miniskid steers) and attachments. As part of the transaction, Morbark has acquired all product designs, intellectual property and manufacturing tools, as well as existing parts, completed units and other inventory. The Boxer acquisition will enable Morbark to continue to solidify the company’s strategy to build equipment that creates opportunities for their customers, dealer network and employees. This acquisition not only enhances those opportunities in Morbark’s existing tree service and rental markets, but also allows Morbark to expand their market presence and current equipment offerings to a broader range of industries and end users, including, but not limited to, landscapers, irrigation and trenching contractors, property owners and general contractors of all sizes. Steve Ballinger, president, Mertz, added, “In seeking the optimal buyer for the Boxer product line, we looked for a company that had its own manufacturing capability, as well as shared our desire to see the line continue to develop, grow and realize its full potential. We know without a doubt that Morbark shares this same vision and will apply the necessary resources to bring it to fruition.” Manufacturing of the Boxer Equipment line, attachments and aftermarket parts, is currently being moved to Morbark’s 1.1-million-square-foot factory and corporate headquarters in Winn, MI. As manufacturing of the Boxer line begins in the first quarter of 2013, Morbark will be working with their authorized dealer network to ensure that existing and future customers receive unmatched service, after sales support and fast, efficient parts fulfillment. Commenting on the close, Jim Shoemaker, Jr., president, Morbark, Inc., said, “The strong strategic fit between our companies, combined with Morbark’s expanded capabilities in product

development, manufacturing and dealer distribution will enable us to efficiently maximize the value and long term potential of the Boxer product line, allowing it to become one of the market leaders in the compact utility loader category.” Morbark, Inc., based in Winn, MI, builds equipment that creates opportunities for customers serving the forestry, recycling, sawmill, bio-energy, landscaping/irrigation, rental and tree care markets. Innovating and building durable and high performance equipment for more than 50 years, Morbark offers a full line of flails, disc and drum tree chippers, brush chippers, horizontal and tub grinders, stump grinders and more. Morbark equipment helps customers harvest, process and convert organic materials into valuable, usable and environmentally sound products. Morbark offers worldwide sales, support and service through an independent, authorized dealer network. To learn more about the company, visit www.morbark.com. Headquartered in Ponca City, OK, Mertz Manufacturing, LLC celebrated its 85th year in the manufacturing industry in 2012 with a record production year. Mertz is building on its present success by focusing on a future oriented towards the manufacturing of high quality, oilfield products; retaining and recruiting a skilled and dedicated workforce; instituting lean manufacturing principles and techniques to improve production processes and output and expanding its current facility to meet the needs of future customers and orders. To learn more about the company, visit www.mertzok.com. With four model series available, including the 118 dedicated trencher, the 300, 400 and 500 series are built to handle a full complement of over 50 universal compact utility attachments. The Boxer’s standard quick attach system enables the user to quickly and easily switch from a bucket to forks to auger or other tools for optimum on the job flexibility and bottom line performance. A feature unique to the Boxer 500 series is its variable width, rubber track undercarriage, which allows the units to enter through gates as narrow as three feet wide. For complete Boxer Equipment product information go to www.boxerequipment.com.

• Since 1964 • Specializing in Trade Publications, Trade Shows, Commercial Printing & Mailing Services

LEE PUBLICATIONS

Serving the agricultural, heavy construction, aggregates, solid waste, commercial horticulture and equine industries.

MARKET TO ANY OR ALL OF THESE INDUSTRIES WITH ONE CALL! Country Folks

Farm Weekly Newspapers - since 1972, serving fulltime farmers in the Northeast and Mid-Atlantic market areas. The number one agricultural publication in this market! Target your audience with 4 regional editions. Monthly Equine Publication Covering New York, New England, Northern Pennsylvania, and New Jersey. Reaching the horseowners in this market area as the official publication of over 25 Associations. since 1979, serving heavy construction contractors, landscaping, aggregate producers and recyclers in the Northeast and MidAtlantic Markets every month. Qualified readership is guaranteed to get you results. Country Folks

since 1990, serving the commercial greenhouses, vegetable and fruit growers, and nurseries in the Northeast, Mid-Atlantic, Midwest and Northwest market areas. Reach your target audience with this monthly publication that is by far the number one media for these industries. Is our newest publication. Started in 2011 to serve an important and growing segment of horticulture, this newspaper is targeted at businesses active in commercial scale growing and winemaking in the United States. In addition to a six times a year mailing, a searchable version is available to our online readers. WASTE HANDLING EQUIPMENT NEWS, since 1992, serving asphalt/concrete recyclers, composting facilities, construction demolition companies, wood waste recyclers and scrap metal recyclers with 2 monthly editions that cover the entire United States. NORTH AMERICAN QUARRY NEWS since 1998, serving the quarry, sand & gravel, hot mix asphalt and ready mix concrete industries with one national edition. This is the fastest growing publication for these markets.

TRADE SHOWS

Lee Publications produces trade shows, both regionally and nationally for each of the markets listed above. Go to our website at www.leepub.com for more information or call 800-218-5586.

COMMERCIAL PRINTING

We specialize in short run (5,000-100,000) copies) web offset printing. Tabloid style print jobs like this publication are available in increments of 4 pages in black & white or full color. Complete mailing sources are available as well as insertions in any of our publications.

LEE PUBLICATIONS PO Box 121, Palatine Bridge, NY 13428 Phone 518-673-3237 Fax 518-673-3245

info@leepub.com

Land Improvement Contractors of America (LICA): “Earthmovers” organization promotes industry, entrepreneurship and fellowship! “Anybody who moves dirt should consider joining the Land improvement Contractors of America (LICA),” said organization CEO, Gerald “Jerry” Biuso, Sr. “Our members are anyone who is in and around earthmoving; those who change and improve the landscape,” Biuso explained. “LICA members, range from owner operator contractors to large

construction businesses with 250 employees. We have a cross section of people and companies, all who are doing something positive with the land.” Through its national office in Lisle, IL, LICA and its 25 state chapters, strive to improve members’ business climate. LICA works for better legislation and regulations and keeps members abreast of the latest regu-

lations changes affecting their operations. LICA also provides training in the latest technology. History of LICA For over sixty years, LICA contractors have led the way for our country’s growth and expansion. These contractors, provide a wide range of services that include grading, excavating, drainage, landscaping, paving, wetland development and site

preparation just to name a few. Our contractors work in cities, on farms, ranches and in rural areas. They work with dedication and commitment to the professional conservation of soil and water. On a national level, LICA is in the midst of aggressive growth and it has increased its membership nearly 25 percent in the past three years. This growth represents

Jerry Biuso, Sr. CEO of LICA, is looking forward to an exciting year in 2013.

LICA's Contractor Safety Management Plan is an extremely useful tool for helping contractors of all sizes stay in compliance with OSHA and other governing agencies.

LICA 12

February 2013 • WASTE HANDLING EQUIPMENT NEWS WEST • Page 9

not just an increase in the total number of members, but it also reflects an increase in younger business owners who are in the peak growth years of their own businesses. Accordingly, it too represents geographic expansion and a wider diversity of business types in areas where it has not always had a past presence. Additionally, both national LICA and state chapters offer benefits that are available to contractor members as well as associate members. These include a comprehensive Safety Manual, Petrocon (a commodities program program designed to reduce operating coasts offering discounts on lubricants and greases, antifreeze and tires), dental insurance, travel discounts, fuel card programs, the LICA

Biofuel market calls for more grinding power at T idewater Green by Jon M. Casey

Tidewater Green's Rotochopper B66 tracked grinder turns construction debris into ground biofuel with ease. Photo provided by Tidewater Green

Page 10 • WASTE HANDLING EQUIPMENT NEWS WEST • February 2013

With the demand for biofuel expected to double between 2009 and 2015, it comes as no surprise that regional recycling facilities such as Chesapeake Virginia’s Tidewater Green, have experienced continual growth. Since they began as a shingle recycling business in 2010, it did not take long for Andy Warren, president of Tidewater Green, to see that the wood waste recycling segment of the business was growing at a faster pace than his RAS business was. More importantly, as he realized that there was an immediate outlet for these materials as biofuels for co-gen boiler steam production at power plants and other facilities equipped to burn wood based biofuels, he needed additional sources of supply for the raw materials as well. “At first, we were recycling tear off shingles, as a way of diverting them from local landfills and as a way to help reduce the cost of petroleum based

asphalt mix ingredients for the paving industry,” said Warren. “What we quickly found was that when roofers pulled off the roofing material, a lot of times, they needed to make repairs to the wooden structures underneath. That made for mixed loads of C&D material. So, we began taking that in as well and sorting it. We ground that wood waste as boiler fuel.” Vincent Coffield, a material hauler and regular customer of Andy’s, is a good example of this recycling growth. “I haul discarded roofing material into Tidewater Green from the City of Chesapeake, Virginia Beach and the surrounding counties,” he said. “It wasn’t too long after they opened up, that I began to bring my material here. I used to take it to another recycler in the area, but here, they get me in and out quickly and I find that I have far fewer flat tires!” Warren said that he appreciates customers like

An operator moves sorted shingles atop the stockpile of sorted shingles outside the processing building.

Large metal pieces like the bolts in this barnacle covered marine piling, are routinely removed by hand before the wood is ground into mulch or biofuel. Coffield. It’s because of customers like Coffield, that Tidewater Green’s growth has been ongoing. Since the business opened, Tidewater Green has experienced almost equal growth in wood and shingles alike. When they first started recycling their wood, they would call in a contract grinding company to grind what they had on hand. In 2011 however, Warren could see that it was time for Tidewater Green to consider purchasing its own grinder. That was when they acquired a new Rotochopper® MP 2 grinder. (See Waste Handling Equipment News, July 2011 issue Pg. 3.) A year and one half later, much has changed. “We secured an ongoing source of wood waste from area businesses that service the marine industry here in the Virginia Tidewater region,” said Warren. “We are situated in an excellent location to receive old pier pilings and wood waste from construction work taking place at nearby docks and piers. We receive much of it by barge. With those larger materials coming into our facility, we found that we needed a more powerful grinder, one that could take entire pilings and grind them up into a 2-inch minus product. That is

Tidewater Green 11

Tidewater Green

from 10

when we upgraded to our Rotochopper B66 tracked unit. It makes short work of those pilings.” Warren explained that because he still has the need for a high speed grinder to process the roofing shingles, the Rotochopper is an ideal dual purpose machine. The tracked B66 is perfect. “We currently receive between 10 and 15 loads of tear off asphalt shingles per day,” he said. “We’ve received as many as 29 in one day, but that is at the peak of the roofing season. We found that the tear off shingles and the wood waste that accompanies that, provided the best raw material for our end users,” he said. “We also found that with the biofuel market, wood waste has a far greater potential, especially when it comes to creosote treated wood and lumber like the pilings.” Warren said that he likes to keep a two week stockpile of ground biofuel on hand so he can meet his customer’s needs. Currently, that amounts to approximately 200 tons per week. Because Tidewater Green now has a grinder with the ability to produce that much material in just a day or two, that gives them more flexibility making for a smoother production schedule. He said that when possible, they double grind their wood waste. “When our Komptech Crambo 5000 is available for us to use here, we initially grind the construction wood debris with that machine to reduce the material in size and to remove most of the unwanted nails and metal that comes along with it,” he said. “A slow speed shredder like the Crambo works well for that. We have had that unit from the start. There are times when we have it contracted out on jobsites but when it’s here it’s being used.” “From there, when the stockpile is large enough to grind, we move the Rotochopper over to the material and grind it again to a smaller, desired size. At that point, the material goes out as a mulch product, or as biofuel. When we are not grinding wood, we can move the Rotochopper to the shingle pile and grind the shingles into RAS.” “At other times, we can move it over to our marine piling stockpile and grind those into biofuel as well. It just depends on what we need,” he said. “It’s for that reason that we went with the tracked unit. I just made sense. It is so much easier to move a unit on tracks that we could see that this was the ideal choice. The wheeled unit was nice, but we outgrew that one very quickly.” Warren noted that they still do not have a market for the salt treated lumber, those with the heavy

As part of a two step process, Tidewater Green runs raw wood debris through their Komptech Crambo 5000 to shred the material and to remove unwanted metal. The shredded wood is then run through the Rotochopper for a final grinding. metal components. With the potential for Arsenic and Lead to remain in the ashes from burning wood treated with that kind of waterproofing, there is still the toxic element that makes that wood unmarketable. “We will find a market for that one day,” he said confidently. Andy said that with the increase in business, he has also needed to add a couple of employees to meet the workload. He said that it was especially gratifying to be able to do that during times when other industries are not as fortunate. “We have come a long way from the time that my partner, Dickie Cameron, a former police officer for the Virginia Beach Police Department and I got together,” said Andy. Back then, he owned a dumpster rental company, and he was looking to open a transfer station. Since then, we have evolved into one of the area’s leading resources for wood and shingle waste.” For more information on Tidewater Green, give them a call at 757-487-4736 or visit their website at www.tidewatergreen.com.

This pile of marine pilings will eventually be turned into mulch like the pile that is seen in the distance.

February 2013 • WASTE HANDLING EQUIPMENT NEWS WEST • Page 11

Andy Warren explains how the Rotochopper's dolly system for the tracked B66 grinder, makes moving the unit from one site to another, an easy job.

Andy says that it is amazing to see how many nails the Rotochopper's onboard magnet removes when grinding shingles.

LICA from 9

Page 12 • WASTE HANDLING EQUIPMENT NEWS WEST • February 2013

Contractor magazine, and supplementary health insurance just to name a few. LICA offers one of the broadest benefit programs of any trade association its size and it continues to shop for opportunities that increase the value of membership. The decision to add a new benefit program is always based on three primary criteria: • Is it the best value for cost program of its nature?; • Does it offer our members a significant benefit that they will want to take advantage of themselves; and • Does it offer our members the opportunity to expand their own businesses’ program of benefits to their employees? LICA Contractors Safety Manual The purpose of this 160 page comprehensive safety manual is to provide LICA members with recommended safe operating procedures. It outlines essential techniques that help protect people and equipment. The manual is designed to serve as an individual company’s safety program or it can supplement an existing program. It contains toolbox talks, equipment and jobsite inspection forms and much more. The manual is worth thousands of dollars, yet it is FREE to every contractor member. For the contractors’ convenience, a CD

version of the complete manual is included. Club Colors is an added benefit to safety conscious members Through the Club Colors and the LICA partnership, members have access to high visibility safety work wear that helps keep workers safe by making them stand out on the job. The safety gear also provides exceptional branding opportunities for employers since the company’s name can appear on every item, and thus on every employee on the job site. With Club Colors, LICA members have access to ANSI and OSHA certified work wear. LICA members receive a 15 percent discount off all branded items, which encourages employers to use the work wear thus ensuring that both budgetary and safety goals are met. National Convention As a way of helping LICA members network and learn more about the construction industry, LICA hosts a national convention annually. In 2013, representatives from across the country will gather in Savannah, GA February 5-9, the site and date of the next convention. Organizers are confident that the 2013 National Winter Convention will be an unforgettable trip for all who attend. Members will stay at the Marriott Savannah Riverfront, which is with-

in blocks from the Historic District and within minutes of dining and shopping! In addition to the many attractions, members can see on their own, LICA has several tours planned as well. Tybee Island is one stop, where members can see dolphins in their natural habitat. Equipment manufacturer, JCB, will host a tour of their plant as well. The LICA

Contractor magazine will host its second annual LICA golf outing. Biuso says that all earthmoving contractors are welcome to join LICA. For additional information, please visit their website www.licanational.com or write to National LICA, 3080 Ogden Ave., Suite 300, Lisle, IL 60532. Call 630-5481984 or e-mail nlica@aol.com.

www. wastehandling. com

DON’T MISS YOUR CHANCE TO ATTEND the Largest Construction Show East of The Mississippi 2 Buildings & Outside Exhibit Space • Skid Steer Rodeo

Wed. March 6th • 8 am - 4 pm Thurs. March 7th • 8 am - 3 pm

NYS FAIR GROUNDS

SYRACUSE, NY

Center of Progress & Horticultural Buildings

Co. ________________________________

HARD HAT EXPO

Title _______________________________

2013 New York

Name_______________________________

27th L ANNUA

Sponsored by HARD HAT NEWS • Lee Publications

ADMISSION TICKET • ADMISSION TICKET • ADMISSION TICKET •

2013 HARD HAT EXPO

FILL OUT THE TICKET BELOW FOR FREE ADMISSION

DOOR PRIZE TICKET Name: ________________________

Registration tickets valid only if all requested information is provided below. Please Print Legibly. No-one under 18 yrs of age admitted without supervision. One Winner Per Day. Need not be present to win. Must be 18 years or older to be eligible to win.

Phone: _______________________ Deposit at the Hard Hat News Booth in The Center of Progress Building

LAST

FIRST

Please Print With Capital Letters

NAME COMPANY ADDRESS STATE

CITY TELEPHONE

AREA CODE

FAX

AREA CODE

ZIP

E-MAIL

If Yes, Please Sign and Date to Receive your Free Subscription

TITLE 1 President / CEO 2 Manager / Supervisor 3 Other FULL-TIME EMPLOYEES 1 1-5 2 6 - 25 3 25+

YES

Signature ______________________________________Date________

NUMBER YOUR PRIMARY BUSINESS #1, SECONDARY #2 ETC.

1 Asphalt Paving ___ 2 Concrete Paving ___ 3 Oil & Stone Paving ___ 4 Bridge Construction ___ 5 Excavating ___ 6 Utility / Underground ___ 7 Construction Demolition ___ 8 Landscaping ___ 9 Land Clearing ___ 10 Logging ___

HOW MANY OF THE FOLLOWING TYPES OF EQUIPMENT DO YOU OWN OR LEASE? 1 Excavators ___ 2 Dozers ___ 3 Track / Wheel Loaders ___ 4 Trucks ___ 5 Backhoes, TLB’s ___ 6 Other Heavy Equipment ___

February 2013 • WASTE HANDLING EQUIPMENT NEWS WEST • Page 13

Would you Like a FREE SUBSCRIPTION to Hard Hat?

Page 14 • WASTE HANDLING EQUIPMENT NEWS WEST • February 2013

February 2013 • WASTE HANDLING EQUIPMENT NEWS WEST • Page 15

LC Whitford Equipment Co., Inc. 4316 Bolivar Rd. Wellsville, NY 14895

FOR SALES, PARTS AND SERVICE -1-800-321-3602

Web site: www.lcwhitford.com Email: sales@lcwhitford.com

Page 16 • WASTE HANDLING EQUIPMENT NEWS WEST • February 2013

Morbark

Timber Pro

Rayco

Barko

Okada

1998 Morbark 1300 Tub Grinder 750-HP, Cat, Loader - Call for Pricing

2012 Rayco 1645SJRS, Kubota Turbo Diesel, 4x4, Dozer Blade - Just What You’re Looking For! Call for Pricing

2012 Timber Pro TL735-B New and Unused Ready for Work! Call for Pricing

2012 Morbark 3800XL Track Wood Hog - Aggressive Grinder! Call for Pricing

2011 Morbark 4600XL Track, 1050-HP, Cat, 60”x46” In-Feed, Ready For Work! Call for Pricing

2009 Morbark 4600 Call for Pricing

2012 Morbark M20R Track Chippers Your Choice of Two! Zero Down for Those Who Qualify! Call for Pricing

2000 Bandit 1400 Track Chipper, 14” Capacity, 2143 Hrs, Cab & Loader Call for Pricing

2012 Rayco C100LGP, Kubota Diesel, Predator Head! Call for Pricing

CHIPPERS 20100 Morbark k Beeverr M12R, 110-HP Cummins, 365-Hrs, Recent Trade, Tricked Out Nice – Save $$$ . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Calll forr Price 20088 Morbark k Tornado o 15, 140-HP Deere, Winch, 1,200-Hrs, Ready to Work! . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Calll forr Price 11D,, 110-HP Cat, 12” Capacity, Low Hours, Good Chipper! . . . . . . . . . . 19988 Morbark k 201 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Calll forr Pricee 20133 Morbark k M15R,, Cummins 170-HP, Winch, Tricked Out Extra Nice! . .Calll forr Price STUMP GRINDERS Speciall Discountss on n Alll In n Stock k Stump p Cutterss - Calll Forr Price! 20122 Rayco o 1645SJRS, Swing Out Controls! 4x4, Dozer Blade, Trailer . . . . . . Calll forr Price 20122 Rayco o 1635 5 Tracc Jr.,, 35-HP B&S, Sold With or Without Trailer! . . . . . . .Calll forr Price

MISCELLANEOUS Duall Archh Grapple, Full Assembly! Includes 112” Bunching Grapple and John Deere 4000 Winch . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Alll forr Onlyy $14,500 Morbarkk “Mutt”” Forestryy Loader, Comes with Grapple & Stump Splitter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Calll forr Price FAE,, UML/SSSL 125, Mower Attachment, Used . . . . . . . . . . . . . . . . . . . . . . . .Calll forr Price FAE,, UMM M EXX 125, Mower Attachment, Used . . . . . . . . . . . . . . . . . . . . . . . .Calll forr Price Raycoo & Rockland Log Grapples, Used . . . . . . . . . . . . . . . . . . . . . . . . . . . .Calll forr Price 20077 Ram m Rood “Mini Skid Steers”, Gas or Diesel, Track or Wheels, Your Choice . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Calll forr Price Ram m Rodd Attachments, Forks, Dozer/Snow blade, Palate Forks Too! . . . . . .Calll forr Price

For Sales, Parts or Service Call 1-800-321-3602 or E-Mail: sales@lcwhitford.com

www.aaauctionfinder.com

REGISTER FREE!!! Find Auctions Near You!! Auctioneers Register FREE!! List all your upcoming auctions with us!! Brought to you by: Country Folks, Country Folks Grower, Wine & Grape Grower, Hard Hat News, Mane Stream, Waste Handling Equipment News, North American Quarry News, Small Farm Quarterly and by Lee Publications Inc. Palatine Bridge, NY 13428 www.leepub.com (800) 218-5586

Grinder Sale

Year 2007 2006 1999 1998 (3)

Make Vermeer Vermeer Vermeer Morbark Vermeer

Model TG5000 TG525 TG400A 1200XL TG7000’s

Stu 630-986-6018 Darin 309-208-4568

1999 Vermeer TG400A

Hours 1088 5400 4290

Winter Deals

Stewart 517-206-5512

Financing Available

2006 Vermeer TG525

Price $369,000 $180,000 $135,000 $98,000 Call For Price

Location Chesterfield, MO Aurora, IL Jackson, MI Ft Wayne, IN Aurora, IL

Contact Greg Stu Stu Gary Stu

Greg 314-960-0920 Gary 317-509-3278

February 2013 • WASTE HANDLING EQUIPMENT NEWS WEST • Page 17

2007 Vermeer TG5000

New and Used Recycling Equipment

2008 Wildcat 516 Approx. 870 Hrs., John Deere Engine, VERY Nice! Excellent Condition! $127,000

2010 Peterson Pacific 4310 Cat 765 HP, Approx 300 Hrs., Fire Suppression, Excellent Condition! $275,000

2000 Morbark 1000 CAT 325 hp Work Ready Good Condition! New Lower Price! $55,000

1998 Diamond Z 1036 New CAT 400 HP Engine, Approx. 600 Hrs., Lots of Updates, Was $99,000 Now $95,000

2005 Morbark 6600 CAT 3412E 1000 hp, New clutch, rebuilt mill, VERY GOOD CONDITION $199,000

1999 Morbark 5600 Cat 3412E Rebuilt Engine, VERY NICE MACHINE Was $180,000 Now $159,000 Motivated 2 SELL

1999 Morbark 2348 CAT 3412E 990 HP Engine, Approx. 100 Hrs. on CAT Rebuild, 2 Flail Debarking Chipper Combo $265,000

Visit us online for a full list of equipment for sale! If we don’t have it, WE WILL FIND IT!! 2010 1993 1998 2003 1999 2006 2002

Bandit Beast 3590 CAT C18 765 HP, Approx. 1200 Hrs., GOOD CONDITION! . . . . . Morbark 3036 CAT 300 HP Engine, Lots of Extras, Nice Straight Machine! . . . . . . . . Morbark 1300 CAT 3412E 860 hp approx 3300 hours, VERY NICE Machine . . . . . . Morbark 1300NCL CAT 1000 hp engine approx. 4500 hours Good Condition! . . . . . . Morbark 2348 3 Flail Debarking Chipper Combo Reworked top to bottom! MINT! . . . . Vermeer HG6000 CAT C16 630 hp Approx. 2800 hrs. GOOD CONDITION! A Steal! . Bandit Beast 2680 CAT 460 hp, chip thrower, Very Good Condition . . . . . . . . . . . . .

. . . . . . .

. . . . . . . . . . . Was $62,000 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

. . . .$272,500 NOW $49,000 . . . .$175,000 . . . .$190,000 . . . .$375,000 . . $155,000 . . $145,000

Have a Grinder, Chipper or Trommel Screen you would like to sell? We can help! Give us a call Toll Free 888-680-3433 Call or Visit us online to see more equipment & pictures

primarymachinery.com

P.O. Box 4613, Salem, OR 97302

Page 18 • WASTE HANDLING EQUIPMENT NEWS WEST • February 2013

Office 503-588-8312 • Toll free 888-680-3433 • Cell 503-602-3433 michael@primarymachinery.com

Instant tramp iron protection with the CH-800 series electric dump valve by Sandvik Sandvik has released the advanced electric dump valve system which is the quickest tramp iron protection system of any cone crusher available on the market. With an astonishing sampling rate of

200 times per second of the hydraulic pressure, this state of the art control and hydraulic system reacts instantly to uncrushable objects, such as tramp iron, drill bits, mill balls, excavator teeth, pieces of

steel or severe packing of fine material in the crushing chamber. The design of the Sandvik HydrosetTM system coupled with the electric dump valve system allows for the quick detection and re-

action to uncrushable objects thus decreasing the risk of internal damage to the crusher. Customer benefits include: 1. Quickest tramp iron protection system of any cone crusher available

on the market which reduces exposure to damaging pressure peaks by over 90 percent. 2. Output signal from the PLC control system notifies the operator that the crushing chamber is opening. Customers can The design of the Sandvik HydrosetTM system coupled with the electric dump valve system allows for the quick detection and reaction to uncrushable objects thus decreasing the risk of internal damage to the crusher. Photo courtesy of Sandvik Mining

Equipment You Can Count On

Vermeer Is Your Total Solutions Provider Contact your dealer by calling 1-888-VERMEER, or visit the Web at www.vermeer.com VERMEER MIDWEST INC. www.vermeermidwest.com

VERMEER TEXAS-LOUISIANA www.vermeertexas.com 222 E. Frontage Rd. Alamo, TX 78516 (956) 782-5580

3025 N. State Hwy. 161 Irving, TX 75062 (972) 255-3500

4802 Baldwin Blvd. Corpus Christi, TX 78408 (361) 887-8499

11220 Allisonville Rd. Fishers, IN 46038 (317) 842-1040

1801 179th St. North East Moline, IL 61244 (309) 751-9540

707 Access Rd. Kilgore, TX 75662 (903) 988-9868

4455 Director Dr. San Antonio, TX 78219 (210) 337-7700

1531 E. Farm Mkt. 1151 Amarillo, TX 79118 (806) 622-2407

3310 W. Coliseum Blvd. Fort Wayne, IN 46808 (800) 649-1157

Route 24 East Eureka, IL 61530 (309) 467-3716

3415 East Slaton Rd. Lubbock, TX 79404 (806) 745-1245

21300 NW Freeway 290 Cypress (Houston), TX 77429 (218) 671-6000

8272 Rushing Rd. Denham Springs, LA 70726 (225) 665-7900

3566 Citadel Cir. Newburg, IN 47630 (812) 490-4400

16595 N I-35, Exit 347 Ross (Waco), TX 76684 (254) 829-9655

1945 Louis Henna Blvd. Round Rock, TX 78664 (512) 244-0505

1005 Thorrez Jackson, MI 49201 (800) 336-3889

2801 Beverly Dr. Aurora, IL 60504 (630) 820-3030

1196 A. Franklin St. Marne, MI 49435 (616) 677-5900

VERMEER MIDSOUTH INC. www.vermeermidsouth.com 580 Jean Mary Ave. Springdale, AR 72762 (479) 361-9110 4622 Stadium Blvd. Jonesboro, AR 72401 (870) 931-6900 3506 S. Arkansas, Russellville, AR 72802 (479) 968-3919 1919 N. Hearne Ave., Shreveport, LA 71107 (318) 678-1575

February 2013 • WASTE HANDLING EQUIPMENT NEWS WEST • Page 19

The worldwide network of Vermeer dealers makes the difference - get to know your local dealer. In the field or in the shop, nobody is more determined to see you succeed. Vermeer is an innovative leader in the manufacturing of underground and tree-care equipment. They can also be your most valued partner in your day-to-day operations.

take corrective actions to remove the unwanted object from their process. 3. The external dump valve is located on the side of the crusher supporting increased safety and easier access during maintenance. “Customers who have already installed the electric dump valve have seen significant improvements in the protection efficiency. The service life of structural components, bearings and liners has increased significantly due to the reduced exposure to pressure peaks,” says Andreas Christoffersson, Product Specialist, Mining cone crushers. “Judging by customer feedback and firm orders already received, we see that the electric dump valve clearly provides value to our customers and gives them peace of mind,” adds Christoffersson. Factory installed electric dump valve kits are available for the CH870, CH890 and CH895 models. A retrofit kit is available for crushers already installed in the field covering the H7800, CH870, H8000, H8000i, H8800 and CH880 models. For further information, please contact Andreas Christoffersson, Sandvik Mining Product Specialist Mining Cone Crushers at +46 40 40 90 88. E-mail andreas.christoffersson@sandvik.com.

DON’T MISS YOUR CHANCE TO ATTEND!

2013 NEW ENGLAND

Name Badge MUST BE WORN at all times while at the show. Sponsored by the Trade Show Division of Lee Publications Publishers of HARD HAT NEWS, the Northeast’s Leading Heavy Construction Equipment Trade Newspaper Registration tickets valid only if all requested information is provided below. Please Print Legibly. No-one under 18 yrs of age admitted without supervision. One Winner Per Day. Need not be present to win. Must be 18 years or older to be eligible to win.

LAST

Page 20 • WASTE HANDLING EQUIPMENT NEWS WEST • February 2013

Please Print With Capital Letters

FIRST

Co. ___________________________

1305 Memorial Ave • West Springfield, MA 01089

Title __________________________

EASTERN STATES EXPOSITION

Name__________________________

Wed. 8am - 4pm • Thurs. 8am - 3pm

Sponsored by HARD HAT NEWS • Lee Publications

FEBRUARY 6TH • FEBRUARY 7TH

2013 NE HARD HAT EXPO

HARD HAT EXPO

DOOR PRIZE TICKET Name: ___________________ Phone: __________________ Deposit at the Hard Hat News Booth in The Center of Progress Building

NAME COMPANY ADDRESS STATE

CITY TELEPHONE

AREA CODE

FAX

AREA CODE

ZIP

E-MAIL

Would you Like a FREE SUBSCRIPTION to Hard Hat? If Yes, Please Sign and Date to Receive your Free Subscription

TITLE 1 President / CEO 2 Manager / Supervisor 3 Other FULL-TIME EMPLOYEES 1 1-5 2 6 - 25 3 25+

YES

Signature ______________________________________Date________ NUMBER YOUR PRIMARY BUSINESS #1, SECONDARY #2 ETC.

HOW MANY OF THE FOLLOWING TYPES OF EQUIPMENT DO YOU OWN OR LEASE? 1 2 3 4 5 6

Excavators ___ Dozers ___ Track / Wheel Loaders ___ Trucks ___ Backhoes, TLB’s ___ Other Heavy Equipment ___

Questions? Call 800-218-5586

February 2013 • WASTE HANDLING EQUIPMENT NEWS WEST • Page 21

Refinements to Vermeer’ s WC2300XL whole tree chipper make it a winner by Jon M. Casey

Vermeer dealer representatives and shoppers had an extensive walk around of the WC2300XL with Brad Van Rheenen.

Page 22 • WASTE HANDLING EQUIPMENT NEWS WEST • February 2013

For visitors who were looking for the latest technology in whole tree chippers at the 2012 WHEN Recycling Expo North, in suburban Rochester, NY

This “before and after” comparison of the infeed areas on the original (top) and improved (bottom) versions of the WC2300XL, shows how the new design will benefit the chipper's owner.

October 24-25, Brad Van Rheenen, Vermeer Environmental solutions specialist, had the ideal answer in the WC2300XL. Introduced in late 2010/early 2011, the WC2300XL was developed primarily for the biofuels industry to satisfy the growing need for a powerful, yet portable whole tree chipper to take into a forest. Since its appearance, the WC2300XL has undergone several refinements to enhance its capabilities and to make it one of the easiest to use and easiest to service chippers on the market. According to Brad, design engineers listened attentively as users of the chipper, shared their early experiences while using the new machine in varying applications. Responding to what they were hearing, the design team went to work to increase the size of the feed intake opening and at the same time, they modified the shape of the infeed area to accommodate “slashy material and tree tops as they enter the chipper. The results have been excellent,” he said. “We doubled the feed roller torque by increasing the diameter of the drum from 19 to 28-inches,” he said. A closer look at the intake and deck area confirmed it. “This chipper can now take in logs up to 23-inches in diameter.” “The increase in the drum size brought the drum closer to the feed chains which make for a more uniform intake of material. The chipper also is equipped with our Ecoidle™ Engine Control System. When that function is selected, the engine speed automatically lowers to 1400 rpm after 30 seconds of inactivity. That helps reduce fuel consumption when not chipping wood.” Taking a walk around the chipper, Brad explained that in conjunction with the new intake design, the “SmartCrush” control system monitors the position of the larger infeed roller. The down pressure remains off until the chains have pulled the material into position and the feed roller has climbed up on the material. It is at this time that the pressure increases to crush the material with large limbs or forks, to bring it securely into the chipper. In this way, the

grapple operator who is feeding the chipper can release the grapple and go on his way to get the next load of material. Brad noted that the six degree slope of the infeed table was designed to lower the “breakover” point where long material first comes in contact with the machine. Longer material can flow smoothly into the chipper, reducing the chance for the tree canopy or limbs to snag on the rear of the machine. While we were at the rear of the unit, Brad pointed out the design of the individually tensioned chains that helps accommodate uneven chain wear. “This helps prolong the life of the chains and the owner only needs to replace the chain that has the most wear. Both chains do not need to be replaced at the same time, since the tension on each chain can be individually adjusted.” “The WC2300XL is available in either the Tier III or Tier 4i (Stage IIIB) 440hp CAT engine option,” he said. “That gives owners the option of choosing the engine package that meets their local governmental requirements.” An interesting feature of the newer design is the replaceable wear parts aspect of the new unit. The high wear, material flow areas all are built with replaceable wear parts. The drum, discharge chute and infeed conveyor chains are all good examples. Pointing to a series of holes designed into the top of the discharge chute, Brad explained how the operator is able to tell when the discharge chute’s inner liner is in need of replacement. “The material will begin to blow out of one of those holes, and at that time, the operator can see that the chute liner has worn through and is in need of replacement.” Brad said the chipper is outfitted with a built-in skidder grab on the tongue. This allows a skid steer loader operator or an excavator operator to move the unit without the need of a truck. The grab point has a park/brake release system that allows the operator to move the unit without reattaching a tow vehicle. Equally important is the chipper’s remote control

Vermeer 23

Vermeer

from 22

feature, which allows one person to operate and load the machine from the loader’s cab. The remote control system also provides real time performance data on the chipper, which allows the operator to make ongoing adjustments on the WC2300XL without leaving the loader. For more information on the Vermeer WC2300XL Whole Tree Chipper, visit the Vermeer website at www.vermeer.com.

Brad Van Rheenen (center facing camera) talks about the slope of the infeed deck on Vermeer's WC2300XL.

Individually adjustable tail pulleys gives owners longer chain life between chain replacement.

February 2013 • WASTE HANDLING EQUIPMENT NEWS WEST • Page 23

Brad Van Rheenen, solutions specialist for Vermeer's Environmental Group, knows this chipper inside and out!

Holes drilled at regular intervals along the discharge chute are an innovative way to know when the inner liner of the chute needs to be replaced. When material starts blowing out any of these holes, it's time to replace the liner!

Chipper assembly line mock-up gives visitors a closer look by Jon M. Casey For most of the workers who rely upon a portable brush chipper as an integral part of their daily tree care business, having an opportunity to see how those chippers are manufactured is an experience that they are not able to enjoy unless it is by seeing a documentary on television or in a YouTube video. This year however, attendees to the TCI Expo in Baltimore, had the opportunity to get a closer look at how Morbark brush chippers are assembled in a hands-on exhibit of how the assembly line at Morbark is laid out and how the machine goes from being a number of specially fabricated parts to become a high quality

brush chipper, on its way to an eager customer. “We wanted this part of our exhibit to be laid out exactly like it is in our plant in Michigan,” said Jim McDaniel who oversees chipper assembly for Morbark. “We wanted to give people who are not able to visit our plant, the opportunity to see how the assemblies come together to form a chipper like the one they might be using every day on the job.” While the layout was much smaller in size than what a visitor might see at the plant, the stages of assembly from the chipper drum with its cutter blades to the housing and mounting on the chipper base were laid out in three separate stages for clear understanding of

Page 24 • WASTE HANDLING EQUIPMENT NEWS WEST • February 2013

Larry Wiggins (beyond units facing camera), helped visitors learn more about how Morbark Chippers are built.

With the chipper subassemblies including the blower fan, chipper housing, chipper base, infeed, yoke assembly and discharge chute in place on the frame, this unit is ready to receive its engine and head off to be painted. Custom colors like the Ravens Football Team purple seen on the unit behind this demo unit are available upon request.

the process. Since several of the raw steel fabrication steps and the welding of those components would not be practical for a display of this kind, nevertheless, visitors could clearly see the progression of the components from basic parts to a subassembly ready for a motor, shields, guards, a fuel tank and paint. Additionally, McDaniel, a Morbark veteran with 24 years of service, said that they wanted to in-

clude the tools, instructions and delivery destinations for some of the “kits” that make up a chipper, so that the visitors could get a feel for the “lean” manufacturing guidelines that Morbark strives to perfect as they build the chippers in their Winn, MI plant. “All of the equipment is Start date driven, on the production schedule,” said McDaniel. “This set up is just like it is in our shop!”

Jim McDaniel was excited about the “Assembly Line” portion of the Morbark exhibit.

February 2013 • WASTE HANDLING EQUIPMENT NEWS WEST • Page 25

To Place A Classified Ad Phone 1 (800) 836-2888 • Fax (518) 673-2381 • E-mail: classified@leepub.com

WASTE HANDLING EQUIPMENT NEWS CLASSIFIED SECTION

Page 26 • WASTE HANDLING EQUIPMENT NEWS WEST • February 2013

Waste Mailing Address - Waste Handling Equipment News Classifieds, PO Box 121, Palatine Bridge, NY 13428 Number / Classification 20 Air Compressors 25 Air Tools 55 Appraisal Services 60 Asphalt Equipment 65 Asphalt Recycling 70 Attachments 80 Auctions 85 Backhoe/Loaders 150 Buckets 165 Business Opportunities 200 Chippers 220 Compaction Equipment 225 Composting Equipment 245 Concrete Products 250 Concrete Recycling 255 Construction Demolition 265 Construction Eq. For Rent 270 Construction Eq. For Sale 275 Construction Machinery Wanted 300 Conveyors 310 Cranes 320 Crushing Equipment 365 Demolition 375 Dozers 400 Drills 415 Employment Wanted 425 Engines 430 Excavators 470 Financial Services 495 For Rent or Lease 505 Forklifts 535 Generators 550 Gradalls 555 Graders 610 Help Wanted 635 Hoists 705 Legal Notices 745 Loaders 760 Lumber & Wood Products 780 Maintenance & Repair 805 Miscellaneous 880 Parts 890 Pavers 912 Point Of Sale 925 Pressure Washers 940 Quarry Equipment 950 Real Estate For Sale 955 Real Estate Wanted 975 Rentals 1017 Scrapers 1020 Screening Equipment 1040 Services Offered 1065 Skid Steer Loaders 1085 Snowplows 1105 Sweepers 1120 Tools 1130 Tractors 1140 Trailers 1145 Training 1170 Truck Parts & Equipment 1180 Trucks 1185 Used Equipment 1205 Wanted 1230 Wood Waste Grinders 1235 Wood Waste Recycling

Announcements

Lumber & Wood Products

ADVERTISING DEADLINE

Parts

Recycling Equipment

TROMMEL BRUSHES

MARCH ISSUE Friday, February 1st

Mfg. By

DUFF BRUSH LLC

If you would like to place a classified ad - please call Peg at

Powerscreen, Wildcat, McCloskey, Retech & Others

1-800-836-2888

1-877-863-3319 www.duffbrush.com

or email classified@leepub.com Announcements # # # # #

ADVERTISERS Get the best response from your advertisements by including the condition, age, price and best calling hours. Also we always recommend insertion for at least 2 times for maximum benefits. Call Peg at 1-800-836-2888 CHECK YOUR AD - ADVERTISERS should check their ads. Lee Publications, Inc. shall not be liable for typographical, or errors in publication except to the extent of the cost of the first months insertion of the ad, and shall also not be liable for damages due to failure to publish an ad. Adjustment for errors is limited to the cost of that portion of the ad wherein the error occurred. Report any errors to 800-836-2888 or 518-673-0111

Recycling Equipment

SMILEY’S FARM & INDUSTRIAL EQUIPMENT 3 pt. snowblowers, $600; buckets, $300; hay wagon, $1,250; scraper blades, $200; sand spreaders, $200; post hole diggers, $400; brush hogs, $350; backhoe ldr., $2,850; JD small dozer, $3,500; 4x4 NH cab & ldr., $12,500; 40hp NH with ldr, 4x4, $17,500; excavator, $12,500; 2001 Chevy dump, $15,000; 1 ton dump, $2,500; IH 4x4, cab tractor, $13,500; Ford & ldr., $2,500; Farmall H, $1,500; Cat dozer, $11,500; MF & ldr., $5,500; 4x4 pickup, $1,500. Equipment trailers, over 300 compact & utility tractors 20-155hp.

30 Acres of Equipment BUYING MACHINES DEAD OR ALIVE

518-634-2310

Lumber & Wood Products

Books MICHIGAN Parts & Operators Manuals, plus Waukesha Engine Manuals for 75A loadwers. Rare. 315-336-3666

Recycling Equipment

FOR SALE

Construction Equipment For Sale

1993 Morbark 1200 Good Mill & Tub, Cat 3412 Running, AS IS, More Photos $75,000

2002 Extec 830 Trommel Screen, 110 HP Deutz Diesel, 1” Screen, Good Running Condition. Price Reduced, As Is $80,000 Firm

813-421-2757

Miscellaneous

grinderguy@askthegrinderguy.com See More Grinders and Screeners @

BUSINESS CARD MAGNETS only $75.00 for 250. Free Shipping. Call Beth at Lee Publications 518-673-0101 or bsnyder@leepub.com Please allow 7-10 business days for delivery

www.askthegrinderguy.com

Parts

SORTING TABLES

HERCULES, CONTINENTAL WAU K E S H A : I n d u s t r i a l Engine Parts, M&M Surplus Sales, P.O. Box 381, Chester, NY 10918. 845-469-3597, Fax 845-469-0990.

NEED BUSINESS CARDS? Full color glossy, heavy stock. 250 ($45.00); 500 ($60.00); 1,000 ($75.00). Call your sales representative or Lee Publications 800-218-5586 and ask for Beth or 518-6730101 bsnyder@leepub.com

2000 UNIVERSAL Refriner PDR96-56, 2150 hrs., u-tube halstr uckman universal refriner. Working every day. 318-422-5794

Lumber & Wood Products

For C&D - Shingles - Green Waste Portable or Stationary CUSTOM BUILT

Brad Kiecker 612-889-7883

www.kafkaconveyors.com

www.equipmentexplorer.com • Search All of our Auction and Used Equipment Ads at One Time! Auction and Used Equipment Ads from:

• Country Folks • Country Folks Grower • Hard Hat News • North American Quarry News and • Waste Handling Equipment News

Buckets

are combined into our searchable database.

CLAM BUCKET, 1 yard Esco, good condition, $2,200.00. 716-937-6434

www.equipmentexplorer.com

To Place A Classified Ad Phone 1 (800) 836-2888 • Fax (518) 673-2381 • E-mail: classified@leepub.com

WASTE HANDLING EQUIPMENT NEWS CLASSIFIED SECTION Waste Mailing Address - Waste Handling Equipment News Classifieds, PO Box 121, Palatine Bridge, NY 13428 Services Offered CANVAS PRINTS: All sizes. Mounted or Unmounted. Just bring in or send us your photo at Lee Publications. Call 518673-0101 bsnyder@leepub.com

Trailers 2002 48’ TRANSCRAFT Eagle flatbed trailer, storage boxes, new shocks and newly undercoated. Asking $9,500. 315-697-9328

Trucks

2010 Ford F350 Super Duty, AT, new Cannonball dump hay bed, Super Nice! $28,900; 2000 Ford F3509, extra cab, 4x4, 7.3 diesel, 6spd., new Cannonball hay bed, $18,500; 2006 Ford F250, extra cab, AT, 4x4, new Butler hay bed, $18,500; 2001 Dodge 2500, extra cab, diesel, AT, new Butler hay bed, $15,500; Bonny View Farms, Raphine, Virginia 540-460-3535

CHEVY C4500 dump, 56,200 miles, electric hoist, 2WD, $25,500; 16’ 7-Ton tilt trailer, $5,300. 518-523-3373, 518524-7005

Wood Waste Grinders

Wood Waste Grinders 1998 VERMEER TG400A tub grinder. 5000 hours, ready to work, duplex drum, $65,000. 229-227-9107.

UNIVERSAL REFINER VERTICAL SHAFT GRINDERS

Trucks 1984 INTERNATIONAL V8 diesel, w/16’ aluminum Agway box, dump w/cross auger in back, $9,600; 1988 International DT466 diesel w/14’ aluminum Agway box, dump w/cross auger in back, $9,800. 315-794-2859, 315841-8411 1996 F-250 diesel 2WD Florida truck $4,600. 585-9935678.

IT IN 1. PHONE Just give Peggy a call at 3. 1-800-836-2888

IT IN 2. FAX For MasterCard, Visa, American Express or Discover customers, fill out the form below completely and fax to Peggy at (518) 673-2381

4. 5.

MAIL IT IN Fill out the attached form, calculate the cost, enclose your check/money order or credit card information and mail to: WHEN Classifieds, PO Box 121, Palatine Bridge, NY 13428

E-MAIL IT IN - E-mail your ad to classified@leepub.com ON-LINE - Go to www.wastehandling.com e a and follow the Place d Ad button to Classified place your ad 24/7!

FOR BEST RESULTS, RUN YOUR AD FOR TWO ISSUES! 650HP - Volvo Engine 600HP - John UR 92 Grinder Deere Engine - Demo Unit UR 82 Grinder - Rental Unit Price: $430,000 Price: $290,000 E-mail: theco@theco-inc.com Phone: 1-800-776-0335

Calendar of Events WASTE HANDLING EQUIPMENT NEWS

tries, covering the latest advances in solid waste technology and management. Limited exhibit space. Researchers, educators, government officials, consultants, managers, community leaders and others with expertise in solid waste are invited to submit papers for oral presentation or poster session at the Conference. Contact Ronald Mersky, 610-499-1146. MAR 19-21 World of Asphalt Show & Conference and AGG1 Aggregates Forum & Expo San Antonio, Texas. On Internet at www.agg1.org/ and www.worldofasphalt .com MAR 23-26 National Demolition Association 40th Anniversary Convention San Diego, CA. Call 800541-2412. On Internet at www.demolitionassociation .com

MAY 21-23 WasteExpo 2013 Ernest N. Morial Convention Center, New Orleans, LA. With over 550 exhibiting companies, 40 conference sessions and workshops and over 11,000 total participants, no other show comes close to the size and scope of WasteExpo. Whether you come from the public sector, a small, medium or large private sector waste services company or a manufacturer or supplier, WasteExpo is your once a year event. Contact Catherine Campfield, 203-358-4128. SEP 15-17 Waste to Fuels 2013 Hyatt Regency Mission Bay Spa & Marina, San Diego, CA. The Waste to Fuels Conference & Trade Show provides a forum for informing the public and private sectors of the economic and environmental significance of converting waste materials to alternative fuels such as bio-diesel and ethanol as well as renewable electric energy. Contact Gene Jones, 850-558-0609. OCT 1-3 International Construction and Utility Equipment Exposition Kentucky Exposition Center, Louisville, KY. On Internet at www.icuee.com.

$15.50 $16.00

$16.50

$17.00

$17.50

$18.00

$18.50

$19.00

$19.50

$20.00

DISPLAY ADS IN THE CLASSIFIEDS ARE $21.00 per column inch, $12.00 second zone. Maximum height 11 inches. No frequency or agency discounts. LINE ADS are one issue, $15.00 for 14 words, 50¢ each additional word. All rates are per insertion. Payment must be included with your order.

Name: (Print)_______________________________ Company Name:____________________________ Address:___________________________________ City:__________________St.:_____Zip:_________ Phone:_____________________________________ Cell:_______________________________________ Fax:_______________________________________ E-mail:_____________________________________ Payment Method: AmericanExpress Discover Visa MasterCard Acct#_______________________Exp. Date______ MM/YY

Signature_____________________Date_________ Required w/Credit Card Payment Only

February 2013 • WASTE HANDLING EQUIPMENT NEWS WEST • Page 27

E-mail announcement of your upcoming event(s) to: jcasey@leepub.com We must receive your information, plus a contact phone number, prior to the deadline that's noted under the Announcements heading on the 1st page of these WHEN Classifieds. *** FEB 12-13 Spring Thaw Safety Training Turning Stone Resort & Casino, 5218 Patrick Rd., Verona, NY. $99. This two day educational and networking opportunity is open and available to everyone in the Mining, Safety and Construction Industries. Topics to include: dealing with regulatory groups, electrical, rigging, accident prevention, hazard awareness, lock out/tagout, first aid/CPR, mobile equipment and supervisory training workshops. Also, new this year, First Aid/CPR Certification and Defensive Driving Certification available for an additional cost. MAR 10-13 28th International Conference on Solid Waste Technology & Management Radisson Warwick Hotel, Philadelphia, PA. 180 presentations from 35 coun-

5 EASY WAYS TO PLACE A WASTE HANDLING EQUIPMENT NEWS CLASSIFIED AD

MARCH 6-7, 2013

Page 28 • WASTE HANDLING EQUIPMENT NEWS WEST • February 2013

Wednesday 8-4 • Thursday 8-3 • NY State Fairgrounds • Syracuse, NY Make Your Plans Now to Attend or Exhibit at The Largest Heavy Construction Equipment Show East of the Mississippi! A-Verdi • 2, 3, 4 Admar Supply • A-2 Antwerp Machine & Repair • 5 Asphalt Zipper • 14 Atlas Fence • 32, 33 Auctions International • 20 Bath Fitter • 147 Beam Mack Sales & Service Inc • H-19 Beka Max of America Inc • 51 Blair Supply Corp • 45 Bobcat of Central New York • A-14 Carpenter Industries • 13 Cazenovia Equipment Company • A-17, A-18 Clark Equipment • 85, 86 Clinton Tractor & Imp. Co • H-23 Commonwealth Equipment Corp • 16 Concrete Raising of Upstate NY • 80 Conviber • 16 Corfu Machine Co., Inc • 78 Design Crete of America • 29, 30 EJ • 19 Emerald Equipment Systems • 42 Featherstone Supply • 50 Feher Rubbish Removal • 79 Ferguson Waterworks • 9 Five Star Equipment, Inc • 76, 77, A-23 Foland Sales, Inc • 57 HD Supply Water Works Ltd • 12 J.C. Smith, Inc • A-20, 62 J&J Equipment, LLC • A-8 Jones Specialty Services Group • 46 Kepner Equipment, Inc • 23 Keystone Precision Instruments • 100, 101 Kimbers Inc • A-13 Kraft Power Corp • H-24

Krown Rust Control • 6 Kurtz Truck Equipment • A-19 Liftech Equipment Companies • A-16 Linemen’s Supply, Inc • H-27, H-28 Mabey, Inc • 58 McQuade & Bannigan • 48 Milton Cat • A-1 Modern Welding School • 87 Montage Enterprises • 75 NYLICA • 55 Perkins Power NE • 61 Progressive Commercial Insurance • 7, 8 Pump Service & Supply • 26, 27 Quality Craft Tools • 176, 177, 178, 179, 180, 181, 182, 183 R. O. Allen & Son • 17 Roy Teitsworth, Inc • 11 S&S Tractor Parts, Inc • 15 S&W Services, Inc •149 Sandri Energy, LLC • 15A Satch Sales • A-5 Sefcu • 10 Specialty Tire Inc • 21, 22 Stadium International • A-7 Steel Sales Inc • 47 Stephenson Equipment • A-10, A-11, A-12 STS Trailer & Truck Equipment • H-20 Trackman • 34, 35 Traffic Safety Products • 21, 25 Tregaskis Agency • 56 Vantage Equipment • A-15 Vellano Bros. Inc • 53, 54 White’s Farm Supply, Inc • A-5 SKID STEER RODEO SPONSORSHIPS Cazenovia Equipment Company - Platinum

FOR MORE INFORMATION CALL 1-800-218-5586 www.hardhatexpo.com

HARD D HAT T EXPO MARCH 6-7

2013

NEW YORK STATE FAIRGROUNDS SYRACUSE, NY WEDNESDAY 8-4 • THURSDAY 8-3

Consecutive Year Hard Hat Expo is Produced by the Trade Show Division of Lee Newspapers, Inc., Publishers of Hard Hat News P.O. Box 121, 6113 St Hwy. 5, Palatine Bridge, NY 13428

FOR MORE INFORMATION CALL 1-800-218-5586

February 2013 • WASTE HANDLING EQUIPMENT NEWS WEST • Page 29

Show Manager: Ken Maring 1-800-218-5586 or 518-673-0103 • Fax 518-673-3245 Visit Our Website: www.leepub.com

New England

West Springfield, MA

FEBRUARY 6-7, 2013 ATES EXPOSITION EASTERN ST STATES 1305 Memor ve ial A Memorial Ave W ingfield, MA 01089 est Spr West Springfield,

Page 30 • WASTE HANDLING EQUIPMENT NEWS WEST • February 2013

W ednesday 8am - 4pm Wednesday Thursday 8am - 3pm

DON’T MISS IT For Information on Exhibiting or Attending CallKen Maring

1-800-218-5586 www.leetradeshows.com

New England Hard Hat Expo is Produced by the Trade Show Division of Lee Newspapers, Inc. Publishers of Hard Hat News, Waste Handling Equipment News, North American Quarry News P.O. Box 121, 6113 St Hwy. 5, Palatine Bridge, NY 13428 • 800-218-5586 • Fax 518-673-3245

February 2013 • WASTE HANDLING EQUIPMENT NEWS WEST • Page 31

Page 32 • WASTE HANDLING EQUIPMENT NEWS WEST • February 2013