Ohio based waste to energy company produces electricity, natural gas and nutrient rich soil amendments
No. 6
April 2013
Compostin Compostingg Equipment Turners, Screens, Turners, Grinders, Chippers Grinders,
W PRSRT STD US POSTAGE PAID UTICA, NY PERMIT #55
Volume 21
Page 2 • WASTE HANDLING EQUIPMENT NEWS WEST • April 2013
Hey Grinder Guy, do these plastic vacuums really work? In a word, “maybe.” In theory, if you put enough horsepower behind a fan, you should be able to pull plastic off a conveyor belt. But the plastic needs to be on top of the material passing underneath the fan for that to work. In addition, all the fines need to be removed from the material or the suction of the fan will be pulling all the fine debris also. That is why you cannot use these fans on finished products coming off the fines discharge conveyors. My only experience with these types of equipment has been with the Komptech Hurrikan units and the windsifter option added to the Komptech Star Screens and there are three things that make them work so well: 1. Plastic or inert materials need to be on top of the other materials; 2. Suction area needs to be where the material can be free floating; and 3. Input of the material needs to be a reduced consistent flow. Trying to take a pile of just contaminated overs and process it through a machine to remove the inerts does not work well. There are too many contaminants and too much volume. Take charge of the issue when you are creating it. For example, having the reduced flow and consistent flow from an overs conveyor coming from a screen of any kind will work well for a removal operation. Also, being able to use the suction
of the fan as the material cascades off a screen deck, any screen deck, is another good option. If you are setting up your own operation or trying other systems look for the following: 1. Have the ability or the option of installing a fan underneath the material to lift debris to the surface and create free floating particles like the Komptech Hurrikan does. This is why it works so well. 2. For pulling off contaminants look for the availability of two fans instead of one. You get twice the air movement with less horsepower and for heavier contamination you will need this. 3. Look for a magnetic head pulley option. Any nails your grinder missed sure do have a way of making it back into your mulch. 4. Everyone get some sort of stone in there material, so adding a stone trap on the discharge conveyor is easy to do and will remove the stones for you giving you a higher quality product. While the Komptech Hurrikan does all this, it does come at a price. So what should you do? Which materials, if they were clean, would give you the best economic boost? It’s not just what material you sell for the highest dollar, it’s what is costing you the most. Moving material piles, trucking to the landfill, whatever. What will give you the best economic benefit? 1. Define your problem and its source;
2. Define your budget; and 3. Choose which contaminants to remove first. The additional options can be added later. In closing, while we are discussing material contaminants, many new stone type separators have come on the market. Removing the stone from your yard cleanup material, removing stone from your mulch or compost is easily done today. The most benefit I have seen though is from removing rock from
Construction and Demolition debris destined for the landfill. It is difficult to see the volume of heavies in a pile of shredded C&D, but after you run it through a stone separator, your wallet will be much heavier with the money you saved on disposal. If you haven’t tried one yet, what are you waiting for? Questions, Comments? Dave Whitelaw grinderguy@askthegrinderguy.com April 2013 • WASTE HANDLING EQUIPMENT NEWS WEST • Page 3
Doosan DL250 wheel loader provides increased horsepower and performance WEST FARGO, ND — The upgraded interim Tier 4-compliant (iT4) DL250-3 offers several improvements that enhance its productivity and comfort for moving materials in infrastructure projects, as well as building, site development and livestock production applications. The new DL250-3 does more than meet the iT4 regulations, as its improvements have been designed to result in increased performance and greater reliability. More power and greater fuel efficiency The 3.7-cubic-yard DL250-3 has been reintroduced as a 172 hp iT4 wheel loader — up from 163 hp in its previous design. It is engineered with a breakout force of 27,120-pounds, a full turn tipping capacity of 20,680-pounds and a dump height of 9-feet 2 -inches. For those requiring additional dumping capabilities, the DL250-3 is also available in a high lift configuration, extending the dump height 18inches above the standard DL250, to 10-feet 8-inches. This wheel loader’s new auto idle feature provides additional noise reduction and fuel savings by reducing the working idle of the wheel loader from 950 rpm to a standby idle setting of 750 rpm when the machine is inactive for a short period of time. Increased performance Designed with improved lifting performance, the DL250-3 offers operators
the ability to set upper and lower limits for both the lift arm and bucket stop positions from inside the cab. Better lifting capabilities improve cycle times in digging and loading applications, while providing better control of the lift arm and bucket positions. An optional fourth spool control valve provides operators the capability to utilize an attachment that requires an additional hydraulic function, e.g., some snowblowers and snow blades. To keep the wheel loader running at optimal performance in dirty and dusty conditions, the DL250-3 incorporates a new automatic-reversing cooling fan. The operator can manually reverse the fan via a switch, or set it to automatically reverse on a preset time frame. Each time the fan reverses, it will run in reverse for a few minutes to clean the cooling system. This results in longer working hours and shorter maintenance time to clean the cooling system. Operators can also expect upgraded driving performance options. As an alternative to the standard limited slip differential, the DL250-3 offers an optional hydraulic locking front differential. Based on ground conditions, the operator can choose to lock the differential manually with a floor mounted foot switch, or allow the machine to automatically engage the system. This provides increased driving power when one wheel spins or loses traction and improves machine performance when nav-
igating tough terrain. This Doosan wheel loader is equipped with six cylinder DL06 diesel engine that has been optimized for use with cooled exhaust gas recirculation (CEGR) system, a diesel oxidation catalyst (DOC) and a diesel particulate filter (DPF). Engines with this configuration are optimized to reduce nitrogen oxides (NOX) and after treatment is needed to reduce particulate matter, to comply with iT4 emission regulations. The 360-cubic-inch engine features a high pressure common rail (HPCR) design with direct fuel injection, electronic control and four valves per cylinder. The HPCR system increases the efficiency of fuel delivery via increased pressure. The increased pressure allows the injector to inject a finer mist into the engine, which results in a more efficient combustion that in turn produces more torque and improved fuel economy, less noise, lower operating costs and cleaner exhaust. Reliability Service intervals on the front lift arm pins have increased fivefold, from 50 to 250 hours, reducing operating costs and downtime. Tilt cylinder hydraulic hoses have been rerouted for improved hose reliability, better hose movement and improved visibility to the attachment. Enhanced comfort Interior cabin improvements also include a number of multi-function display panel upgrades on a centralized monitor that allows the operator to view
comprehensive machine system information. The centralized monitor displays critical machine information — such as engine rpm, engine coolant temperature, fuel level, machine warnings, time and the transmission selected gear. A key exterior cabin improvement is lowered front side glass, providing improved visibility of operations. A new door threshold makes getting in and out of Doosan wheel loaders — and cleaning the inside of the cab much easier. The DL250-3 — like every new Doosan machine — is covered by an innovative 48 hour parts guarantee. The program guarantees that if a “machine debilitating” part is needed, Doosan will deliver it directly to the end user within two business days or Doosan will pay for a replacement machine rental. The 48 Hour Parts Guarantee is subject to carrier delivery restrictions and/or governmental agency delays. Doosan Infracore Construction Equipment America, headquartered in West Fargo, ND, markets the Doosan brand of products which includes large excavators, wheel loaders and articulated dump trucks. With more than 160 heavy equipment dealer locations in North America, Doosan is known for an unmatched dedication to service and customer uptime and durable, reliable products. Doosan is fast becoming a global force in heavy construction equipment. For more information on Doosan products, visit www.doosanequipment.com.
Page 4 • WASTE HANDLING EQUIPMENT NEWS WEST • April 2013
Steinert Scrap Market VP Dennis Ciccotelli to retire WALTON, KY — Steinert US, a leading supplier of separation equipment for the scrap, waste, recycling and mining markets, has announced the retirement of Dennis Ciccotelli, Scrap Market vice president. Ciccotelli has worked with Steinert U.S. since its inception in the United States and will officially retire on May 31, 2013. This announcement comes as Dennis nears 50 years of dedicated service to the recycling industry. Among Ciccotelli’s lengthy record of career achievements is his work with Steinert U.S. During his tenure with Steinert, Dennis was integral in aiding the company’s growth from a resale entity with three employees to a full service corporation with over 30 employees. Dennis began his career in 1964 as a crane and monorail engineer, following a career path that eventually led to positions as operations manager with Camden Iron & Metal, Inc. and
then Resource Recycling, LLC. His position at Resource Recycling led him to represent Steinert GmbH in the United States before ultimately taking a position in the newly formed entity of Steinert US in 2003. “During my time, I watched as the profit driven scrap industry grew into the recycling industry driven by the good of all mankind.” Said Ciccotelli. “What was done by hand at a few pounds per hour is now accomplished by machines at a hundred tons or more per hour. Workers, no longer in harms way, monitor technology systems instead of picking and chopping at metals by hand. I am very proud to be a part of the development of recycling technology spanning my career of nearly 50 years.” “For many of our customers Steinert U.S. is Dennis Ciccotelli.” Said Steinert U.S. President Jason Looman. “He has been a great leader, innovator, friend and men-
tor to many in the industry. Dennis’ dedication to Steinert and the industry is unparalleled and deserves our greatest of thanks.” Ciccotelli began the transition to retirement in January 2013 and will spend the remainder of his time at Steinert U.S. in an ambassador/mentor role. Dennis has served as a mentor and market expert for many years and leaves the company in a position to continue his legacy with great success. Steinert GmbH CEO Marcus Heinrich said “From the very beginning; Dennis supported Steinert’s development in the North American Market. Over the years he helped to develop the understanding within the Steinert Group that the business is not only about one specific technology, it is about the best possible solution for our customers. Developing concepts for our clients, together with the application specialist
around the world, became his strength. We thank Dennis for his outstanding achievements and fantastic support and we wish him all the best in his retirement.”
In his retirement Dennis notes that his priorities will be “to be a better husband, father, grandfather, uncle, neighbor, citizen, human being, golfer, cook and garden-
er, (not necessarily in that order).” On behalf of Steinert employees around the globe, congratulations on your retirement “Uncle Dennis.”
Regional Sales Manager joins Road Machinery Rick Dennis oversees Northern California SACRAMENTO, CA — Road Machinery, LLC is pleased to announce that Rick Dennis has joined the company as regional sales manager for Northern California. In his new position, Rick is responsible for increasing new and used equipment sales in his territory, with six account managers reporting to him. “We welcome Rick to Road,” says Dan Roush, president at Road Machinery. “He brings many years of experience and a tremendous amount of technical and sales knowledge to the company. We expect him to have a major impact in increasing our market share.” Rick has 35 years of experience in the heavy equipment industry. He has extensive knowledge of the industry, due to the wide range of departments he has worked with, including parts, accounting, inside and outside sales and both sales and operations management. A native Californian, Rick was born
and raised in the Napa Valley. He has completed extensive training programs through heavy equipment manufacturers. He and his wife enjoy traveling, especially within the U.S. Road Machinery LLC has been selling and servicing heavy machinery since 1955. As the exclusive dealer for Komatsu in the Southwest and California and a distributor of Wirtgen Group, Finn and Kleemann equipment, the company has fifteen locations throughout the area, in Arizona, New Mexico, Texas, California and Mexico. To find a local branch, call the company at 800989-7121 or visit their website at www.roadmachinery.com.
Johnson Crushers International (KPI-JCI) earns prestigious award for best safety record from Astec EUGENE, OR — Johnson Crushers International (KPI-JCI) has been honored with its first Bronze Hat Award from parent corporation Astec Industries, Inc., which signifies the best safety record over the past three years for all Astec subsidiaries. JCI has taken signifi-
cant strides in improving its safety culture over the past few years, according to Chris Vest, who has served as safety manager for the past two years. The most recent changes include modifications to fall protection, lockout/tagout procedures, bloodborne
pathogen control plan and jewelry policies. “The changes were put in place to improve our safety culture and better align our safety program with the requirements set forth by the state of Oregon’s Occupational Safety and Health Administra-
tion (OSHA),” Vest said. “Our number one asset is our employees. Employees are more likely to get injured if a safe work environment is not provided and enforced, so we knew that had to be a priority for us.” JCI’s incident rate has dropped significantly
since 2001, when it reached 13.96. In 2010, the company had zero recordable injuries. While there are still strides to be made in its safety program, Vest said he’s seen considerable improvement in the past two years. “In our minds, every year needs to be like
Equipment You Can Count On
The worldwide network of Vermeer dealers makes the difference - get to know your local dealer. In the field or in the shop, nobody is more determined to see you succeed. Vermeer is an innovative leader in the manufacturing of underground and tree-care equipment. They can also be your most valued partner in your day-to-day operations. Contact your dealer by calling 1-888-VERMEER, or visit the Web at www.vermeer.com VERMEER MIDWEST INC. www.vermeermidwest.com
VERMEER TEXAS-LOUISIANA www.vermeertexas.com 222 E. Frontage Rd. Alamo, TX 78516 (956) 782-5580
3025 N. State Hwy. 161 Irving, TX 75062 (972) 255-3500
4802 Baldwin Blvd. Corpus Christi, TX 78408 (361) 887-8499
11220 Allisonville Rd. Fishers, IN 46038 (317) 842-1040
1801 179th St. North East Moline, IL 61244 (309) 751-9540
707 Access Rd. Kilgore, TX 75662 (903) 988-9868
4455 Director Dr. San Antonio, TX 78219 (210) 337-7700
1531 E. Farm Mkt. 1151 Amarillo, TX 79118 (806) 622-2407
3310 W. Coliseum Blvd. Fort Wayne, IN 46808 (800) 649-1157
Route 24 East Eureka, IL 61530 (309) 467-3716
3415 East Slaton Rd. Lubbock, TX 79404 (806) 745-1245
21300 NW Freeway 290 Cypress (Houston), TX 77429 (218) 671-6000
8272 Rushing Rd. Denham Springs, LA 70726 (225) 665-7900
3566 Citadel Cir. Newburg, IN 47630 (812) 490-4400
16595 N I-35, Exit 347 Ross (Waco), TX 76684 (254) 829-9655
1945 Louis Henna Blvd. Round Rock, TX 78664 (512) 244-0505
1005 Thorrez Jackson, MI 49201 (800) 336-3889
2801 Beverly Dr. Aurora, IL 60504 (630) 820-3030
1196 A. Franklin St. Marne, MI 49435 (616) 677-5900
VERMEER and VERMEER LOGO are registered trademarks of Vermeer Manufacturing Company in the US and/or other countries. © 2002 Vermeer Manufacturing Company. All Rights Reserved.
VERMEER MIDSOUTH INC. www.vermeermidsouth.com 580 Jean Mary Ave. Springdale, AR 72762 (479) 361-9110 4622 Stadium Blvd. Jonesboro, AR 72401 (870) 931-6900 3506 S. Arkansas, Russellville, AR 72802 (479) 968-3919 1919 N. Hearne Ave., Shreveport, LA 71107 (318) 678-1575
April 2013 • WASTE HANDLING EQUIPMENT NEWS WEST • Page 5
Vermeer Is Your Total Solutions Provider
2010,” Vest said. “Zero injuries is our expectation and always our goal.” JCI President Jeff Elliott said the success of the company’s safety program comes from the commitment of its employees. “All of JCI’s associates are committed to a stronger safety culture,” Elliott said. “It’s very challenging and takes an extraordinary effort in light of our type of work and dynamic schedule. At JCI, we have had success strengthening our safety culture when we all realize it’s in all of our best interests to make safety the first priority.” “Everyone deserves the right to earn a day pay, and be in position to come back the next day and earn the dignity of a day’s work,” Elliott continued. “The progress JCI has made in its safety program attests to the caliber of its associates and their willingness to work as a team to accomplish a common goal, and I’m proud to be part of that team.” For more information about KPI-JCI and Astec Mobile Screens, visit www.kpijci.com. About KPI-JCI & Astec Mobile Screens KPI-JCI and Astec Mobile Screens, Astec companies (NASDAQ: ASTE), is a world-wide leader in manufacturing equipment for the aggregate, construction, paving and recycling industries. As an innovative, high integrity manufacturer, KPI-JCI develops quality, state-of-the-art products and has the ability to engineer custom products because of a highly qualified engineering staff. KPI and JCI joined together in 1997 with the purchase of JCI by Astec Industries. KPI and JCI joined together in 2006 in a marketing effort under the KPI-JCI logo. Astec Mobile Screens and KPIJCI joined sales and marketing efforts in the spring of 2008. KPI-JCI and Astec Mobile Screens proudly manufacture its products in Yankton, South Dakota, Eugene, Oregon and Sterling, Illinois. For more information, call (605) 668-2524 or visit the web site at www.kpijci.com.
TABLE OF CONTENTS ADVERTISE! May. . ADVERTISING DEADLINE: April 5 Screening Equipment / Crushing Equipment Show: Waste Expo, May 20-23, New Orleans, LA June. . ADVERTISING DEADLINE: May 3 Wood Waste Recycling - Grinding, Screening, Coloring, Biomass Energy July. . ADVERTISING DEADLINE: June 7 Scrap Processing Equipment / Balers, Shears, Shredders, Magnets August. . ADVERTISING DEADLINE: July 5 C&D Recycling - Attachments, Picking Stations, Screens September. . ADVERTISING DEADLINE: August 2 Crushing / Grinding / Screening / Shredding
Grinder Guy . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Johnson Crushers International (KPI-JCI) earns prestigous award for best safety record from Astec. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Ohio based waste to energy company produces electricity, natural gas and nutrient rich soil amendments . . . . . . . . . . . . . . . . . . 8-9 by Jon M. Casey
Doosan DXB130H and DXB190H breakers provide increased strike power and productivity . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 Design changes cut 80 percent from setup of Superior’s swing axle telestacker conveyor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16 Earth Care Farm knows compost . . . . . . 20-21
Waste Handling Equipment News West
by Kristen M. Castrataro
Issn. 1085-7621
Page 6 • WASTE HANDLING EQUIPMENT NEWS WEST • April 2013
Waste Handling Equipment News is published monthly by Lee Publications P.O. Box 121, 6113 State Highway 5, Palatine Bridge, NY 13428 Standard Class Postage Paid at Palatine Bridge, NY 13428 POSTMASTER: Send address changes to: Lee Publications, P.O. Box 121, Palatine Bridge, NY 13428
Publisher. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Frederick W. Lee Vice President, Production . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Mark Lee Vice President & General Manager . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Bruce Button Editor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Jon M. Casey Editorial Assistant . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Kathleen Lee Comptroller . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Robert Moyer Production Coordinator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Jessica Mackay Page Composition . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Michelle Gressler Shop Foreman . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Harry Delong Subscriptions/Circulation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 888-596-5329 Classified Ad Manager - Peggy Patrei . . . . . . . . . . . . . . . . . . . . . . . . . . 518-673-0111 MAIN OFFICE: Palatine Bridge, NY 13428 518-673-3237 - FAX: 518-673-2381 Wendell Jennings (Sales Manager) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 518-673-0114 Barbara Rivera . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 518-673-0135 Jan Andrews . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 518-673-0110 REGIONAL SALES OFFICES Kegley Baumgardner (Western VA) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 540-255-9112 Scott Duffy (NH, VT, ME) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 802-484-7240 Ian Hitchener (Baltimore, Delmarva Peninsula, Southern New England) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 518-210-2066 Brian Johnson (Eastern New York) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 518-673-0161 Wanda Luck (Carolinas). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 336-416-6198 Tina Krieger (National). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 518-673-0108 NATIONAL TRADE SHOW SALES Ken Maring, Trade Show Manager . . . . . . . . . . . . . . . . . . . . . . 888-355-5080 or 518-673-0103 Waste Handling Equipment News will not knowingly accept or publish advertising which is fraudulent or misleading in nature.The publisher reserves the sole right to edit, revise or reject any and all advertising - with or without cause being assigned - which, in his judgment, is unwholesome or contrary to the interest of this publication. Waste Handling Equipment News assumes no financial responsibility for typographical errors in advertisements; but, if at fault, will reprint that portion of the ad in which the error appears. Publisher accepts no financial responsibility for ads which do not appear due to any circumstance.
Classifieds . . . . . . . . . . . . . . . . . . . . . . . . . . . 24 Cover photo:The Supreme Dredge has an 8-yard strike capacity, but can hold up to 10-yards when heaped full of material.
The Editorial Deadline precedes the Ad Deadline by two days. Waste Handling Equipment News readers include owners, operators, and purchasing agents involved in construction demolition, asphalt/concrete recycling, wood waste recycling and composting. Our editorial emphasizes new equipment, site stories, association updates, legislation and industry news. If you have news to contribute, contact: Jon M. Casey, Editor Waste Handling Equipment News 6113 State Highway 5 Palatine Bridge, New York 13428 Tel: 717-258-6775 Fax: 518-673-2699 E-Mail: jcasey@leepub.com
USCC announces 2012 award winners ing industry. Dr. Gouin is a nationally and internationally recognized scientist and extension specialist in the area of compost use and ornamental and environmental horticulture. During his career he served as Chair of the Department of Horticulture and Landscape Architecture at the University of
Maryland, authored hundreds of papers, articles and newsletters and developed the Master Composters Program in conjunction with the Master Gardeners program in Maryland. Jeffrey Ziegenbein, of Inland Empire Regional Composting Authority (IERCF), received the 2012 Composter of the
Year Award for excellence in compost production and marketing. The IERCF was constructed in a retrofitted IKEA warehouse, processes 200,000 wet tons of organic material per year and is the largest indoor composting facility in North America. Incoming USCC President Lorrie Loder was welcomed to
her new position and the USCC recognized past USCC presidents: Sharon Barnes (1999), Stuart Buckner (2000), Jack Hoeck (2001), Kevin Tritz (2002-2004), Carl Kipp, Jr. (2005), Matthew Cotton (20062008), Wayne King, Sr. (2009-2010) and Frank Franciosi (2011-2012).
April 2013 • WASTE HANDLING EQUIPMENT NEWS WEST • Page 7
Urban agriculturist, composter and food justice advocate Will Allen of Growing Power was recognized by the United States Composting Council (USCC)for his outstanding service to the composting industry through grassroots efforts by being named the 2012 recipient of the H. Gregory Clark Award. The awards ceremony was held during the USCC 21st Annual Conference and Tradeshow in Orlando, FL on January 30, during which Mr. Allen presented to, and deeply inspired, an audience of over 200 composting industry professionals. Mr. Allen said he was honored to be recognized by an association of professionals who, like himself, understands “it’s all about the soil.” The H. Clark Gregory Award is given to an individual who has displayed outstanding service to the composting industry through various grassroots efforts, including backyard composting, vermi-composting, or public or end user education. Growing Power produces and sells vermicompost every year, and provides compost education to thousands of individuals from around the world through workshops and facility tours. “Will’s indefatigable effort to educate the public on the importance of growing healthy soil, nutritious food and safe, thriving communities has had a tremendous impact on our nation’s understanding of composting and its role in the urban agriculture movement,” said Michael Virga, USCC executive director. “Will points out, as do our members, that the road to healthy, sustainable living begins with the soil beneath our feet.” Also recognized at the awards luncheon was compost pioneer Francis Gouin, Ph.D., of the University of Maryland (retired), as the 2012 recipient of the Hi Kellogg Award for outstanding service to the compost-
Ohio based waste to energy company produces electricity, natural gas and nutrient rich soil amendments by Jon M. Casey
The Komptech Topturn X53 Compost turner outfitted with the Irrigation Device Option, turns material at the quasar Zanesville Facility. The irrigation option includes the control system, machine plumbing and hose and reel.
F
Page 8 • WASTE HANDLING EQUIPMENT NEWS WEST • April 2013
or quasar Energy Group President, Melvin Kurtz, the use of the phrase “coming full circle,” describes how his company’s recycling and energy production benefits people on a grand scale. With customers who rely upon quasar’s electrical and natural gas production and their Equate™ naturally balanced NPK agricultural soil amendment product, quasar’s future seems to have unlimited potential. At the same time, quasar has an increasing number of suppliers who bring them recyclable waste material that quasar turns into commodities. Their idea of generating a sustainable source of electrical power while at the same time creating other much needed fuel and fertilizer products is a reality that has been evolving since 2006.
A quasar natural gas filling station is used for company vehicles at the Zanesville facility.
Kurtz recalled how quasar began as part of a partnership with a German company as they worked to develop an anaerobic digester to convert municipal sludge into electrical and natural gas energy for the city of Akron, Ohio. The partner company went out of business, but quasar took the best of the European technology that they were using, converted it to American standards over the next three years, and quasar was born. Now 99 percent of a facility’s components are made in the United States, with approximately 80 percent of them made in Ohio. He said they perfected the membrane roof designs, now using their own. They developed their own mixing equipment, stands and foundations, with everything meeting U.S. regulatory requirements. Since that first facility, quasar has gone on to install digesters at 10 locations. Currently they have plants that are on line or under construction in Ohio, New York and Massachusetts. Capabilities “Anaerobic digesters are the ideal way to convert organic residuals into renewable energy, reduce your carbon footprint and the result is cleaner air, soil and water,” said Kurtz. “We have taken a European style agricultural installation and converted it for use in an industrial environment.” At each facility, they generate electricity in some capacity, with some of the units working in partnership with Air Products, Inc. to produce natural gas after taking out the H2S, then drying it before separating the CO2 from the methane, and making pipeline quality gas. At this point, quasar is able to compress the gas to make motor vehicle fuel in the form of CNG. “We have converted about 30 company vehicles to run on our own brand of motor vehicle fuel we call qng™,” he said. “Twenty seven of them are our company vehicles.” The process “We take in material in trailer loads. We use materials like organic crop residuals, sewage sludge, fats, oils and grease, with some of it coming from Fortune
Plant Operators Chase Warne and Chase Smith (L-R), next to the quasar-Zanesvlle control building. 500 sources, materials like off spec products and damaged food items. We depackage it, recycling the cardboard and plastic from the packaging, and put the organics into the digester, with the effluent being used to manage the composted material using the Komptech X-53 Windrow Turner.” Kurtz said that most composters run the leaves that they recycle, in a grinder or shredder of some kind, because leaves will not break down until their surface is disturbed. However, at the quasar plants that work on the “complete mix” formulation (a high liquid lower solids blend of materials), they use a Komptech windrow turner outfitted with the irrigation option to incorporate the effluent from the digester into the windrows. They make several passes with the unit because the added moisture helps to speed up the time that it takes for the compost to
quasar
9
quasar
from 8
Leaves and shredded wood is windrowed in preparation for composting.
An operator loads Kurtz Brothers' Komptech Crambo 6000 at their Dublin, Ohio facility.
Ohio’s De pendable Dealer
A Komptech Crambo 6000 shreds logs and yard waste at the Kurtz Brothers Central Ohio facility in Dublin.
Established in 1952, Columbus Equipment Company is a leading heavy equipment distributor in the United States. Offering a line of industry leading manufacturer brands — Komatsu, Takeuchi, Kubota, Link-Belt, Dynapac, Morbark and Atlas Copco — the dealership serves a wide range of industrial segments throughout Ohio, Indiana, Kentucky and West Virginia. Otherwise known as Ohio’s Dependable Dealer, the company’s reputation for superior product support is unmatched in the territory. In October 2007, Columbus Equipment Company established an Environmental Division with one product line, and one salesman. In just six years, the division has expanded to five best in class manufacturers — Morbark, Komptech, McCloskey
International, Barko and Komatsu — serving customers across Ohio, Indiana, Kentucky and West Virginia. The division offers expertise in serving the needs of customers involved in alternative energy/biomass; waste management/diversion; recycling; compost, mulch and topsoil processing; forestry; tree care and aggregates. Komptech is a leading innovator in the mechanical processing of solid waste and biomass, helping to reduce landfill volumes, increase recycling efficiency and generate renewable energy sources in the recycling industry’s fastest growing segments. Columbus Equipment Company serves Komptech customers in Ohio, Kentucky and Indiana.
April 2013 • WASTE HANDLING EQUIPMENT NEWS WEST • Page 9
mature. He noted that they add one pound of a special admixture, branded by quasar as q-bio™, per 1000 gallons of effluent, which works to mitigate the odor and shorten compost time. “A similar admixture has been used in Europe for almost two decades. It does not eliminate the odor, but it mitigates the traditional odor that you would associate with sewage sludge or organic volatile solids. When you incorporate the admixture with the windrow turner, it adheres to the surface of the leaves, making the biological process that usually takes eight or nine months to break down the leaves, take only three months to make compost. We can convert raw leaves into a marketable composted product in less than half the time.” The effluent is about 93 percent water, so being exothermic, the windrows heat from the inside out and the liquid evaporates. That leaves high value nutrients in the compost. In this case, the nutrients are not running off and being wasted, but they are retained in the material. Currently, the effluent is not only used for injection into the windrows, but it is also transported to farmland for application where permits are already in place. Future plans are to use as much as possible in the windrows. That will depend upon additional windrow turners with injection systems coming on line at the various locations. New ideas “We have currently partnered with The Ohio State University to develop a ‘dry’ digester that is designed for cellulosic material as its primary biomass source,” Kurtz added. Instead of being a slurry based “wet” design, they are looking for 70 to 80 percent proportion of solids to liquids in the digester at the Zanesville, Ohio location. “The Ohio State University will plant a cellulosic grass, Miscanthus giganteus, to harvest for fuel for this digester,” he said. “That is a patent pending process that is showing excellent results. This digester produces natural gas. This is our first one of this kind.” Kurtz said that because of his association with Kurtz Bros., Inc., quasar has a ready wholesale outlet for their composted material. His brother Tom has grown Kurtz Bros. to be the largest originator of composted material in the state of Ohio. From taking bio-waste in the form of municipal waste, livestock manure, food waste, yard waste and wood waste materials, and turning it into natural gas, compressed natural gas, electrical power and composted material for agricultural application, Kurtz rightly says that quasar’s technology uses a process that brings things “full circle.” For more information about quasar energy group, visit their website at www.quasarenergygroup.com. For more information on Komptech equipment, visit their website at www.komptech.com.
Page 10 • WASTE HANDLING EQUIPMENT NEWS WEST • April 2013
The new Terex Fuchs MHL360 E boosts power, reduces emisssions and improves load cycles SOUTHAVEN, MS — The new Terex Fuchs® MHL360 E material handler offers our exclusive Blue Evolution approach to machine design to continually improve machine durability, increase operator comfort and reduce exhaust emissions. Featuring a six cylinder, 254 hp turbo charged engine, the MHL360 E offers more power than the D Series, while improving fuel consumption and meeting stringent Tier 4i emissions standards. The engine and hydraulic system of the new MHL360 E material handler efficiently work together to offer fluid load cycles, resulting in faster operating cycles at increased efficiency. The high performance hydraulic system features a separate slewing circuit, allowing machine swiveling to quickly start and stop. Offering simultaneous swiveling and lifting functions with uncompromised precision, the handler is more responsive to operator commands, even when handling heavy loads. The Terex Fuchs energy recovery feature feeds braking energy back into the main hydraulic pump as the operator slows slewing of the upper structure to reduce load on the engine. This new hydraulic system design of the Terex Fuchs MHL360 E helps to deliver up to 20 percent faster load cycles over the D Series. The handler’s environmentally friendly Tier 4 interim compliant engine features Exhaust Gas Recirculation (EGR) technology to significantly reduce emissions compared to previous models. Regeneration of the diesel particulate filter (DPF) occurs automatically, without impacting machine performance. The regeneration process can be temporarily interrupted, if necessary, by pressing an indicator button located on the control panel. Engine start/stop is now push button controlled to properly manage engine shutdown while under critical load conditions or during DPF regeneration. A revamped high performance cooling system
keeps the engine operating efficiently, even when working in extreme temperatures. Both the engine and hydraulic system incorporate larger cooling systems, protected by vented panels, to increase airflow. The engine’s new hydraulically powered fan simplifies maintenance and automatically adjusts airflow based on operating conditions to provide efficient cooling. Controls inside the spacious cab have been updated to improve operator efficiency and comfort. At 23 percent larger than previous designs, the Wide Video Graphics Array (WVGA) color display includes an improved high resolution and high contrast screen with an antiglare shield and scratch resistant coating. Color video of the work area behind the machine is captured by the standard rear view camera system and shown on the WVGA monitor for easy viewing by the operator. Intuitive controls, including quick-access push buttons for frequently used functions, make for a short learning curve of MHL360 E operation, and the ergonomic multifunction button delivers effortless fingertip navigation through the display screens. The handler’s hydraulically height adjustable cab offers a maximum eye level elevation of up to 20.1-feet above ground level and independent forward movement up to 7.2-feet, making loading and unloading simpler. Its cushioned cab elevation system provides absorption of shocks and jolts for operator comfort. The reinforced cab lift frame mounting fixtures offer increased dynamic performance for the Terex Fuchs MHL360 E. Servicing the new MHL360 E is simple and fast. The machine’s convenient stowaway ladder offers quick access to the engine, central lubrication system and large area platform of the upper carriage service deck. The handler’s fuel prefilter is now located on top of the fuel tank for easier access. Additional CAN Bus connections expand diag-
nostic capabilities, so service technicians can quickly identify and address underlying issues. The purpose built MHL360 E offers innovative features that deliver high performance material handling in scrap, recycling, demolition and portside applications. Inverted hydraulic boom cylinder mounting offers superior protection from debris, while rigid hydraulic pipes located on the stick, boom and undercarriage help better protect against damage. Bearing points on the boom and lift cylinders are reinforced with solid, full length metal, while increased pin diameters offer improved stability. Steel plates shielding the hydraulic lines at the end of the stick deliver additional protection to improve system reliability. The MHL360 E’s rugged double row slewing ring design disperses forces over two rows of bearings to improve component service life and durability. Terex Corporation is a diversified global manufacturer of a broad range of equipment that is focused on delivering reliable, customer driven solutions for many applications, including the construction, infrastructure, quarrying, mining, shipping, transportation, refining, energy, utility and
The purpose built MHL360 E offers innovative features that deliver high-performance material handling in scrap, recycling, demolition and portside applications. manufacturing industries. Terex reports in five business segments: Aerial Work Platforms, Construction, Cranes, Mater-
ial Handling & Port Solutions and Materials Processing. Terex offers financial products and services to assist in the
acquisition of equipment through Terex Financial Services. More information can be found at www.terex.com.
AEM names Charlie O’Brien as senior vice president Promotion recognizes leadership as AEM executes its strategic plan to enhance member services The Association of Equipment Manufacturers (AEM) has named Charlie O’Brien as senior vice president in recognition of his expanded leadership responsibilities for the association. These include activities under AEM’s new strategic plan, initiated in 2012, to better serve all members’ current and future business development needs. In addition to increased responsibilities since joining AEM in 2007, O’Brien has taken a leadership role with expanded responsibilities in development of strategic initiatives to achieve the plan’s Key Result Area (KRA) goals and objectives and AEM goals development
to continue implementation of the strategic plan. He was also instrumental in development of the vision for launch of AEM’s successful AG CONNECT Expo and Summit, now on its third show, to take place January 2931, 2013 in Kansas City, MO. The initial AEM strategic initiatives focus on increased advocacy, a services plan to respond to membership survey results and a new financial model to sustain expanded services and activities. New initiatives being implemented for 2013 include increased member engagement, market information services and global business development. “This is not another layer of management; it is a way to improve our service to the membership and better repre-
sent the industry through better use of staff capabilities. Charlie serves as the recognized face and voice of AEM agriculture activities, and provides the solid management and leadership credentials to enable AEM to achieve this higher level of action,” stated AEM President Dennis Slater. O’Brien joined AEM in 2007 as vice president. He serves as agriculture sector leader and also oversees AEM’s market information, technical/safety and member services areas. O’Brien came to AEM with more than 20 years of experience in the off road equipment industry. This includes president and CEO of FPC Financial as well as Farm Plan & AgLine (Canada) product manager and sales manager for John Deere Financial;
branch manager and director of strategic initiatives for Deere Financial’s England operations; and Deere Financial management positions in sales, market and business development and risk management. AEM is the North American based international trade group providing innovative business development resources to advance the off road equipment manufacturing industry in the global marketplace. AEM membership comprises more than 850 companies and more than 200 product lines in the agriculture, construction, forestry, mining and utility sectors worldwide. AEM is headquartered in Milwaukee, WI, with offices in the world capitals of Washington, D.C., Ottawa, Canada and Beijing, China.
Doosan DXB130H and DXB190H breakers provide increased strike power and productivity WEST FARGO, ND — The new Doosan DXB130H and DXB190H hydraulic breakers feature an energy recovery system that increases strike power for maximum productivity. The nitrogen powered breakers are equipped with an upper/lower suspension system that isolates the power unit from the housing, making it an ideal fit for in a variety of demanding applications. Delivering up to 600 blows per minute, the 2,822-pound DXB130H is designed for use with excavators in the 15 to 22
metric ton weight range, specifically the Doosan DX180LC, DX190W and DX210W. Rated in the 3,000 -foot-pound impact energy class, the DXB130H requires a hydraulic flow rate of between 23.8 and 37 gallons per minute. The 3,698-pound DXB190H is designed for use with excavators in the 21 to 31 metric ton weight range, which includes the DX225LC, DX235LCR, DX255LC and DX300LC Doosan excavators. The DXB190H is rated in the 6,000-footpound impact energy
class and requires a hydraulic flow rate of between 31.7 and 47.5 gallons per minute. The DXB190H is engineered with Doosan’s two speed control, which also is available on the DXB260H breaker. With two speeds, the DXB190H breaker frequency can be manually adjusted between low and high frequency settings. This allows the operator to match the breaker impact rate to the working conditions for optimized productivity. The energy recovery system captures the pis-
Fecon, Inc. announces Komatsu Equipment Co. as dealer su Equipment will also provide many local service facilities for all Fecon products and customers. Fecon, Inc. was established in 1992 near Cincinnati, Ohio and originally produced horizontal grinders and other wood processing equipment. Fecon’s Bull Hog is currently the No. 1 selling forestry mulcher. Fecon also provides track carriers and other equipment for vegetation management, geothermal, seismic and wood to energy biomass industries. Originally founded in 1952 as Rocky Mountain Machinery Company in Salt Lake City, the company merged with Pioneer Equipment Company forty five years later to form what is now Komatsu Equipment Company. For over 60 years, Komatsu Equipment Company has served the needs of its customers in the construction, mining and utility businesses. If you would like more information about Fecon or Komatsu Equipment Co. call Courtney Shafer at 513-696-4430 or e-mail at cshafer@fecon.com.
Delivering up to 600 blows per minute, the 2,822-pound DXB130H is designed for use with excavators in the 15 to 22 metric ton weight range, specifically the Doosan DX180LC, DX190W and DX210W. ton’s rebound energy and uses it to increase strike power, maximizing performance. At the same time, the main control valve system optimizes strike power. Blank fire protection is standard on both the DXB130H and the DXB190H, and is accomplished by using a cushion of oil at the base of the piston, which reduces the metal to metal contact in case of a blank fire situation. The breakers’ suspension system extends excavator work group life by absorbing harmful vibrations and stress waves. Also, a patented main valve design reduces hydraulic pressure peaks
that can reduce pump life, crack excavator work group welds and cause system overheating. The cradle mounted grease station delivers continuous grease flow, reducing bushing and tool wear while minimizing maintenance costs and downtime. The DXB130H and DXB190H breakers also come with a mounting cap, auxiliary hydraulic hoses, two moil points, toolbox and a nitrogen checking device. A one-year limited warranty also comes standard. In addition to the general purpose moil, working tools available for the DXB130H and DXB190H include a blunt tool, a chisel and a pyramidal or
“nail” point. Doosan Infracore Construction Equipment America, headquartered in West Fargo, ND, markets the Doosan brand of products which includes large excavators, wheel loaders and articulated dump trucks. With more than 160 heavy equipment dealer locations in North America, Doosan is known for an unmatched dedication to service and customer uptime and durable, reliable products. Doosan is fast becoming a global force in heavy construction equipment. For more information on Doosan products, visit www.doosanequipment.com.
April 2013 • WASTE HANDLING EQUIPMENT NEWS WEST • Page 11
Fecon® proudly announces Komatsu Equipment Company as a stocking dealer and service, parts provider in Utah, Wyoming and much of Nevada. Komatsu Equipment Co. is stocking BH80EXC Mulchers mounted on Komatsu PC200 Excavators, FTX100LGP Tracked Carriers, BH74SSV Skid Steer Mulchers, FBS 1500 Bunching Tree Shears and the Rotating Front Grapple for Skid Steers as well as teeth and parts to support the attachments and machines. They have also added machines and attachments to their rental fleet. “I’m very excited that Komatsu Equipment Company has partnered with Fecon. It is an excellent match of complimentary products and company philosophies regarding quality and service.” Regional Manager Mark Ferguson Fecon and Komatsu Equipment Co. will be a great team, together fulfilling the land clearing, vegetation management, right of way clearing and site prep equipment needs of Utah, Wyoming and much of Nevada. Komat-
Page 12 • WASTE HANDLING EQUIPMENT NEWS WEST • April 2013
Caterpillar unveils first hybrid excavator PEORIA, IL — Caterpillar Inc. (NYSE: CAT) unveiled the first model in its new line of hybrid excavators, the Cat® 336E H, at its Mossville Industrial Design Center at a special trade press event, “The Next Generation is Here.” The new 336E H will be sold and serviced exclusively through the global Cat dealer network following the machine’s official launch at bauma 2013 in Munich, Germany. The order board for the Cat 336E H opens in Feb. 2013, with factory shipments beginning in March 2013. The Cat 336E H uses a new hydraulic hybrid technology developed by Caterpillar. “A hybrid is independent of any particular technology — it doesn’t have to be electric,” said Ken Gray, global product manager for large hydraulic excavators for Caterpillar’s Excavation Division. “There are many ways to store and reuse energy, including our patented hydraulic hybrid system featured on the Cat 336E H.” “Caterpillar has developed, built and tested electric hybrid excavators, but until now we had not found a hybrid approach that would actually lower our customers’ owning and operating costs,” Gray said. “Large excavators operate in high production applications in which fuel is a very significant operating cost for our customers. So, the 336E H, the hybrid version of our workhorse 336E, is ideal for introducing our new hydraulic hybrid technology, with its more than 300 filed patents.” “We can’t wait to see the reaction of our customers to the 336E H,” said Gray. “We’re confident they will be delighted. No other commercially available technology has higher power density than hydraulics, and that’s why we selected a hydraulic solution to help our customers achieve substantial fuel savings. The 336E H also meets stringent Tier 4 Interim/Stage IIIB emission standards. It is extraordinarily quiet, too. So it’s a socially responsible machine for our customers to own, and they will sacrifice nothing in terms of performance, power, force, speed or production. Once more, the owning and operating costs for the 336E H are actually lower than the standard machine. That’s the value customers expect from Cat excavators.” “The 336E H is a game changer — the most revolutionary excavator to come to market in decades,” said Gary Stampanato, vice president of Caterpillar’s Excavation Division. “Customers aren’t going to choose the 336E H simply because it is sustainable. They will select it because it actually lowers their owning and operating costs, and maintains the performance of our industry leader, the 336E. Caterpillar has the most productive and fuel efficient excavator product line in the industry, and our customers are supported by the best dealers in the world. The 336E H extends our leadership, is the right thing
to do for our customers and is a sign of great things to come.” Technology “Caterpillar’s corporate technology strategy centers on research and development in advancing technology to meet customers’ needs today, which is what the 336E H does,” said Tana Utley, Caterpillar’s chief technology officer and vice president of the Product Development and Global Technology Division. “We’re also continuously working on innovations that we anticipate will meet their future needs. That’s why we’re continuing our research and development in electric hybrid technology too, which actually began our hybrid development path several years ago.” “Caterpillar has an extraordinary team of people working on hybrid technology solutions for the next generation of Cat hydraulic excavators,” added Gray. “They are from every corner of the world, are among the very best and brightest minds, and they are listening very closely to our customers. It’s exciting for me to see their enthusiasm for this project and the quality product they have developed in the 336E H, and we’re just getting started.” “I am absolutely confident our engineers will continue to discover and develop the best hybrid approaches for Caterpillar’s extensive line of equipment and applications, whether that’s some form of hydraulic or electric hybrid system or something as of yet unknown,” Utley added. “At Caterpillar, we don’t simply engage in creating new technologies like the hydraulic hybrid system just for technology’s sake, or simply to prove that we can. Our technology strategy’s focus never loses sight of what our research and development efforts can mean to our customers’ success today and in the future.” Since the introduction of the 300 Series in 1994, the family of excavators has become the industry standard in a large variety of general, quarry and heavy construction applications. Caterpillar introduced the standard 336E in 2010 as a direct replacement for the 336D. The 336E was introduced primarily to meet Tier 4 Interim/Stage IIIB emissions standards, and like any new Cat machine, the 336E includes several enhancements over its predecessor, including more horsepower with greater fuel efficiency, more lift capability, higher digging force and automatic aftertreatment regeneration. The 336E H has all of the same powerful advantages of the 336E with the biggest difference between the two models being even greater fuel efficiency. To achieve added fuel savings, the design of the 336E H uses three building block technologies that: 1. Conserve fuel with engine power management via the Cat Electronic Standardized Programmable (ESP)
pump, which smoothly transitions between the hydraulic hybrid power sources, engine and accumulator; 2. Optimize performance using restriction management via the patented Cat Adaptive Control System (ACS) valve, which intelligently manages restrictions and flows to seamlessly control machine motion with no loss of power, and to ensure operators experience no difference in control, hydraulic power or lift capability; and 3. Reuse energy via the hydraulic hybrid swing system, which captures the excavator’s upper structure swing brake energy in accumulators, and then releases the energy during swing acceleration. Fuel savings The 336E H delivers industry leading productivity with up to 50 percent greater fuel efficiency, which is measured in tons per liter, over the 336D. Customers can expect the 336E H to use up to 25 percent less fuel compared to a standard 336E, and up to 33 percent less fuel than the 330/336D. All three of the technology building blocks, Conserve, Optimize and Reuse, are integrated together to maximize fuel savings in a variety of applications. Even in low intensity swing applications, customers will still experience significant fuel savings because of the Conserve and Optimize technologies. (Additional factors, such as operator skill and jobsite conditions, also affect fuel savings.) Return on hybrid investment Because the 336E H burns less fuel and reduces regulated engine emissions, owning and operating costs will be dramatically lower compared to the standard machine, and its carbon footprint will be smaller, as well. Precisely when customers will recoup their initial investment in a 336E H depends on fuel prices and their applications. Assuming today’s fuel prices and a high production application for a 336E H, Caterpillar estimates customers can realistically expect to see a return on their investment for the hybrid excavator model in as little as one year. Durable and reliable Caterpillar designed the 336E H to deliver the same durability and reliability customers expect of all Cat machines, including large excavators like the standard 336E. The design of the 336E H uses Cat hydraulic components with a long track record of proven durability and reliability for maximum uptime and productivity. Also like a standard machine, 336E H components can be replaced or rebuilt to maximize the hybrid’s service life. Validation Customers have been using field follow machines, which are first production machines built for customer acceptance testing, to validate fuel burn, controllability, reliability and performance of the 336E H. In a formal produc-
tion study completed in August 2012, results were impressive, including greater fuel efficiency and lower cab and spectator noise levels than the 336E and 336D. Additionally, the ACS valve, which intelligently manages restrictions and flows to seamlessly control machine motion, has been in the field since 2008 with superior performance and reliability. The ACS and hybrid system have also proven to work well together to maximize performance and controllability of work tools, including hammers, shears and grapples. Product support and dealer readiness Customer support for the 336E H is provided exclusively by the on the ground support of Caterpillar’s worldwide dealer network. For decades, Cat dealers have made significant and substantial investments in facilities, people and expertise to support Cat excavators, including the new 336E H. Cat dealers know and understand hydraulics, and are prepared to consult with customers to help determine which Cat excavator model, whether hybrid or standard, is the best match for a customer. Dealers are also equipped with tools developed by Caterpillar that help them weigh factors into their recommendations, including a customer’s projected equipment use, budget and anticipated years of ownership to help ensure the proper decision. The 336E H can also be bundled with extended warranties and service contracts. Caterpillar position on technology According to Utley, it is the company’s vertical integration and broad technology portfolio, coupled with its wide range of application experience that enable Caterpillar to select and develop the optimal technologies for each Cat machine and varied customer applications. “Our commitment is to match technologies to customer value,” she said. “That means Caterpillar will include hybrid elements in machines where it is evident those elements are the most efficient and effective means of improving value to our customers, which is definitely what we’ve done with the 336E H.” “Hybrid technology is a key element of our customer focused technology portfolio, and so are our next generation powertrains, autonomy, alternative fuels, and engine emissions and efficiency,” Utley added. “The new hydraulic hybrid technology Caterpillar developed for the 336E H is an outstanding example of the results we’re achieving from our technology strategy. It provides a critical bridge as we continue to research, develop and build the technologies of the future technologies that will help ensure our customers’ business success.”
www.wastehandling.com
USED EQUIPMENT SHOWCASE Reaching recycling and aggregate industry professionals across the United States in one easy section.
This section is dedicated to used equipment and auctions ONLY! Looking g forr a piece e off equipment? Here’s s yourr place e to o find d it!
Looking g to o selll used d equipment? s yourr place e to o selll it! Here’s Forr Moree Information n Contactt Wendelll Jennings
518-673-0114 Lee Publications, Po Box 121, 6113 State Hwy 5 Palatine Bridge, NY 13428
Grinder Sale
Year
Make
Model
Hours
2007 1999 1998 (2)
Vermeer Vermeer Morbark Vermeer
TG5000 TG400A 1200XL TG7000’s
1088 5400 4290
Stu 630-986-6018 Darin 309-208-4568
Spring Deals
Price
Location
Contact
$369,000 $135,000 $98,000 Call For Price
Chesterfield, MO Jackson, MI Ft Wayne, IN Aurora, IL
Greg Stewart Gary Stu
Stewart 517-206-5512
Financing Available
Greg 314-960-0920 Gary 317-509-3278
April 2013 • WASTE HANDLING EQUIPMENT NEWS WEST • Page 13
1999 Vermeer TG400A
2007 Vermeer TG5000
LC Whitford Equipment Co., Inc. 4316 Bolivar Rd. Wellsville, NY 14895
FOR SALES, PARTS AND SERVICE -1-800-321-3602
Web site: www.lcwhitford.com Email: sales@lcwhitford.com
Page 14 • WASTE HANDLING EQUIPMENT NEWS WEST • April 2013
Morbark
Timber Pro
Rayco
Barko
Okada
1998 Morbark 1300 Tub Grinder 750-HP, Cat, Loader - Call for Pricing
2012 Rayco 1645SJRS, Kubota Turbo Diesel, 4x4, Dozer Blade - Just What You’re Looking For! Call for Pricing
2013 Rayco RC1220 99HP, 12” Capacity Chipper Call for Pricing
2011 Morbark 3800XL Track Wood Hog - Aggressive Grinder! Call for Pricing
2011 Morbark 4600XL Track, 1050-HP, Cat, 60”x46” In-Feed, Ready For Work! Call for Pricing
2009 Morbark 4600 Call for Pricing
2012 Morbark M20R Track Chipper Only One Left! 325HP Cat, Cat Bottom Call for Pricing
2000 Bandit 1400 Track Chipper, 14” Capacity, 2143 Hrs, Cab & Loader Call for Pricing
2012 Rayco C100LGP, Kubota Diesel, Predator Head! Call for Pricing
CHIPPERS 20088 Morbark k Tornado o 15, 140-HP Deere, Winch, 1,200 Hrs, Ready to Work! . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Calll forr Price k 2100D,, 110-HP Cat, 12” Capacity, Strong Running Unit! . . .Calll forr Price 19988 Morbark 20011 Morbark k Tornado o Modell 13,, 125-HP Perkins, Recent Trade In! . . .Calll forr Pricee o RC1220,, 99-HP, 12” Capacity Chipper . . . . . . . . . . . . . . . . . . .Calll forr Price 20133 Rayco STUMP GRINDERS Speciall Discountss on n Alll In n Stock k Stump p Cutterss - Calll Forr Price! 20122 Rayco o 1645SJRS, Self Propelled Stump Cutter, 4x4, Dozer Blade, Trailer Calll forr Price 20133 Rayco o 1645SJRS,, Self Propelled Stump Cutter, 4x4, Dozer Blade, Trailer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Calll forr Price
20122 Raycoo 16355 Tracc Jr.,, 35-HP B&S, Dozer Blade, Trailer . . . . . . . . . . . . . .Calll forr Price 20133 Raycoo 16355 Tracc Jr.,, 35-HP B&S, Dozer Blade, Trailer . . . . . . . . . . .Calll forr Price MISCELLANEOUS Duall Archh Grapple, Full Assembly! Includes 112” Bunching Grapple and John Deere 4000 Winch . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Alll forr Onlyy $14,500 Morbarkk “Mutt”” Forestryy Loader, Comes with Grapple & Stump Splitter .Calll forr Price FAE,, UML/SSLL 125, Mower Attachment, Used . . . . . . . . . . . . . . . . . . . . . . . .Calll forr Price FAE,, UMM M EXX 125, Mower Attachment, Used . . . . . . . . . . . . . . . . . . . . . . . .Calll forr Price Raycoo & Rockland Log Grapples, Used . . . . . . . . . . . . . . . . . . . . . . . . . . . .Calll forr Price 20077 Ram m Rodd “Mini Skid Steers”, Gas or Diesel, Track or Wheels, Your Choice . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Calll forr Price Ram m Rodd Attachments, Forks, Dozer/Snow blade, Palate Forks Too! . . . . . .Calll forr Price
For Sales, Parts or Service Call 1-800-321-3602 or E-Mail: sales@lcwhitford.com
www.aaauctionfinder.com Find Auctions Near You!! Auctioneers Register FREE!! List all your upcoming auctions with us!! Brought to you by: Country Folks, Country Folks Grower, Wine & Grape Grower, Hard Hat News, Mane Stream, Waste Handling Equipment News, North American Quarry News, Small Farm Quarterly and by Lee Publications Inc. Palatine Bridge, NY 13428 www.leepub.com (800) 218-5586
April 2013 • WASTE HANDLING EQUIPMENT NEWS WEST • Page 15
REGISTER FREE!!!
Page 16 • WASTE HANDLING EQUIPMENT NEWS WEST • April 2013
Design changes cut 80 percent from setup of Superior’s swing axle telestacker conveyor Superior Industries, North America’s only combination manufacturer of conveyor systems and their related accessories, says its engineers cut major setup time required to transition a swing axle TeleStacker conveyor from transport to radial positions. The new swing axle XTP TeleStacker conveyor shifts from road to radial mode in just five to ten minutes. That is compared to 45 to 60 minutes for the original model, a design still common to competitive swing axle telescopic conveyors. Three key design features characterize the next generation swing axle XTP. First, to engage the stacker’s power travel, chains and sprockets are replaced with a preinstalled t-handle mechanism. While the chain and sprocket arrangement takes up to 30 minutes to install, requires maintenance and can be tricky to guard, the new power travel system takes just seconds to engage and needs no maintenance or guarding. Secondly, the new axle design requires fewer link arms during both transport and operational modes. This modification again helps to reduce setup time. Lastly, the addition of a pivoting walking
beam allows for true wheel alignment during radial travel. Poor alignment results in tire scuffing and can even cause a conveyor’s feed point to shift out of position. The 40 year old conveyor manufacturer produced a video to help show the new design in an everyday working environment at http://superior-ind.com. First generation Swing Axle models can be retrofitted with the new Swing Axle XTP. The company also builds models for highly portable applications, extreme capacities, highly mobile terminals and applications that require tracked travel capabilities. Superior Industries has a reputation of engineering and manufacturing groundbreaking, bulk material handling conveyors and cutting edge conveyor components. From its headquarters in Minnesota, the manufacturer supplies stackers, transfer conveyors, ship loaders and stationary systems; plus idlers, pulleys and accessories to lower operating costs and increase production. The company manufactures from additional plants in Arizona and Georgia. Contact Superior Industries at 315 East Highway 28, Morris, MN
56267. Call 320-5892406 or e-mail info@superior-ind.com. Fans and customers can also connect with Superior at superior-ind.com; via the company’s blog, Channel 72; on Facebook; via Twitter or YouTube.
The new axle design requires fewer link arms during both transport and operational modes.
Scrap & C&D Recycling Tools by Moley Magnetics.
Separator Magnets All sizes of Drum, Pulley and Cross Belt Magnets Available.
Electro or Permanent Magnet available. Please contact us for more information.
24V Battery Operated Magnets No generator needed. Runs off vehicle battery. Mobile Hydraulic Shears 4 Turn Blades • Speed Value • Bolt on Piercing Tip
High Quality Best Value on the Market Fixed Pulverizer 4 sizes available, reversed cylinder to protect rod, easy change teeth, cutting blade.
Rotating Pulverizer 5 sizes available, reversed cylinder to protect rod, cutting blade, Oversized rotation motor.
Self Contained Hydraulic Magnets 5 Minute Install - No Outside Generator Needed The new Swing Axle XTP TeleStacker Conveyor shifts from road to radial mode in just five to ten minutes.
www.MoleyMagneticsInc.com 716-434-4023 or email: sales@moleymagneticsinc.com
New Case 521F wheel loader achieves advanced performance, fuel efficiency with new features and SCR emissions technology RACINE, WI — Case Construction Equipment today introduced the new Case 521F wheel loader, offering customers a 12 percent increase in fuel efficiency over the previous E Series model, while delivering faster acceleration and quicker cycle times. The machine is available in standard Z-bar, extended reach and tool carrier models, and is the latest offering in the company’s F Series wheel loader line, which boasts premium features and industry leading performance, productivity and efficiency. Case chose selective catalytic reduction (SCR) technology for the 521F to meet Tier 4 Interim emissions standards based on the machine’s application tasks and power demands. SCR results in lower temperatures in the exhaust system while optimizing combustion. “SCR was the obvious choice for the 521F because a wheel loader’s tasks are more variable, creating inconsistent engine loads and power demands,” said Rob Marringa, brand marketing manager, Case Construction Equipment. “Rather than compromise power, we let the engine do what it does best — run at peak performance — and then use an after treatment for emissions.” According to Marringa, the benefits of SCR technology are greater efficiency and reduced downtime because there’s no heightened fuel burn or diesel particulate filter (DPF) regeneration. In addition, lower ambient temperatures means slower degradation of lubricating oil, which extends service intervals. Furthermore, fewer engine components means less crowding under the hood and easier access to service points. Operators also will experience a faster throttle response and cleaner emissions by avoiding recirculation equipment utilizing cooled exhaust gas recirculation (CEGR) and DPFs. “At Case, we’re committed to matching the technology with the task, and we believe that SCR technology for our F Series wheel loaders is the simplest, most powerful and efficient solution,”
Marringa said. Improved performance and versatility enhance productivity The new 521F wheel loader offers optional heavy duty axles, enabling it to perform more tasks such as operating in scrap yards or recycling centers. These axles, with auto locking front and open rear differentials, have the same design as the larger F series wheel loader axles, including metal face seals and sintered bronze brake linings. They offer outstanding traction in all conditions, especially in non-compacted surfaces like gravel and help reduce tire wear when working on hard surfaces. “The heavy duty axles have superior sealing capability and longer service lives, improving owner and operator costs,” Marringa said. “In addition, they can accept higher load capacities, allowing operators to configure the unit with solid, foam filled or chain wrapped tires.” On a 50 meter loading and dumping cycle, Case estimates the 521F wheel loader can make up to 56 cycles per hour, moving up to 144-square-yards or 212 tons of material per hour. Advanced instruments and cab improve machine and operator effectiveness The new advanced instrument cluster (AIC) on the 521F wheel loader has four operating modes, allowing operators and service technicians full visibility and control of basic job functions, such as diesel exhaust fluid (DEF) level and fuel efficiency, as well as protective controls that can help eliminate costly repairs. “Auto Idle is a fuel saving feature that allows for multiple idle rates, thereby reducing fuel consumption while operators are waiting for the next truck to load or task to be completed,” said Marringa. “As an additional benefit to the Case wheel loader customer, Automatic Machine Protection recognizes a critical problem with the hydraulics, engine or transmission, and shuts down the engine as soon as the machine stops moving.” The Case 521F wheel loader delivers
class leading comfort and visibility and new features to improve operator effectiveness. Case’s Quiet Cab boasts the largest cab in the industry, has a 70.8 decibel rating, and supplies cleaner air with a dual air filtration system. It also provides a more comfortable ride with an optional heated air ride seat and ergonomically positioned controls that ensure a long day in the cab won’t reduce productivity. “The 521F wheel loader has new options such as joystick steering, a rear view camera and heated side mirrors that allow for precise control and visibility in tough conditions such as snow plowing and truck loading,” Marringa said. Case’s floor to ceiling windows and improved lighting system continue to provide excellent visibility, from the cutting edge of a bucket to the tip of a fork. More selection, larger attachments The 521F wheel loader can handle heavier and much larger buckets thanks to the Case coupler system that pulls the attachment closer to the machine, providing significant breakout. The coupler is compatible with both JRB and ACS attachments. Also, the
addition of over 250 new buckets, including light material buckets, rotary brooms and forks, and 4-in-1 buckets, means the 521F wheel loader offers even more solutions for a wide range of tasks. The offering includes Case SmartFitTM bucket tooth systems. The SmartFit system provides stronger, more durable teeth and adapters, and hammerless reusable locking pins to improve digging performance. The Case 521F wheel loader features a 4.5 liter Tier 4 Interim-certified Case engine that delivers up to 131 gross hp. Classified as a 2.1-square-yard wheel loader, the Case 521F has an operating weight of 22,856-pounds. The standard model delivers 19,596pounds of lift capacity and 16,735pounds of bucket breakout force, with hinge pin height of 11-foot 10-inches for efficient truck and hopper loading. For additional wheel loader product specifications, customer testimonials, competitive comparisons, finance offers and the SCR solutions calculator, please visit www.casece.com. For a Case wheel loader demonstration, see your local Case dealer.
April 2013 • WASTE HANDLING EQUIPMENT NEWS WEST • Page 17
Offering customers a 12 percent increase in fuel efficiency over the previous E Series model, while delivering faster acceleration and quicker cycle times.
The benefits of SCR technology are greater efficiency and reduced downtime because there's no heightened fuel burn or diesel particulate filter (DPF) regeneration.
Asphalt Drum Mixers offers recycle systems to enhance cost efficiency HUNTERTOWN, IN — Asphalt Drum Mixers, Inc., offers four models of portable and stationary recycle systems to enhance the cost efficiency of asphalt plants. Recycle systems allow plants to use milled material in hot mix asphalt (HMA). Since recycled asphalt pavement (RAP) is much cheaper than virgin aggregate, the result is a less expensive finished product that maintains the high quality of a pure virgin aggregate mix. ADM’s recycle bins feature a 15 ton capacity and are continuously welded at the seams. The bins contain angle irons and midsection stiffeners for reinforcement, and their steeply sloped sidewalls prevent material from plugging or bridging. A tapered discharge opening leads to the direct drive belt feeder with a 5 hp motor, multi-ply belt, self-cleaning tail pulley and adjustable skirt boards. To transfer RAP from the bin, the recycle system includes a heavy duty weigh conveyor that features a channel
frame and wind shroud protection for accurate weighing. The conveyor is 2feet wide and, depending on the model, between 45 and 65-feet long. It introduces RAP to the dried aggregate mix after the heating process. Based on conditions and type of plant, up to 50 percent of the HMA can contain recycled pavement. Portable units feature a heavy duty Ibeam frame on a gooseneck trailer with a fifth wheel kingpin hitch, single axle and air brakes. The trailer includes hinged support legs and a hydraulically controlled incline conveyor. An optional lump breaker is available for ADM’s recycling systems to break down large pieces of RAP into a useable size. It features an adjustable steel breaker plate and replaceable tungsten tipped teeth, and is powered by a 30 hp, high efficiency motor with an open mesh covered V-belt drive. Single and double deck scalping
Portable units feature a heavy duty I-beam frame on a gooseneck trailer with a fifth wheel kingpin hitch, single axle and air brakes. screens are also available to ensure oversized material does not enter the aggregate mix. Other options include air cannons, grizzlies, bin extensions, adjustable legs with sand shoes and a skid with bolt-on support legs. A family owned company since 1974, Asphalt Drum Mixers, Inc. offers as-
phalt plants, auxiliary equipment, parts and service. For more information, contact ADM, 1 ADM Pkwy., Huntertown, IN 46748. Call 260-637-5729, fax 260637-3164, e-mail sales@admasphaltplants.com or go to www.admasphaltplants.com.
Page 18 • WASTE HANDLING EQUIPMENT NEWS WEST • April 2013
The power of McCloskey now available as stand alone Diesel hydraulic power unit is a turnkey option for conveyors across brands PETERBOROUGH, ON — Customer demand has resulted in McCloskey International now offering the same power units installed on their high performance and durable stacking conveyors as a stand alone product. Available in 49 and 90 hp, the power units have the power and reliability as those installed in the full line of McCloskey stackers sold around the world. Powered by a Kubota engine, the power units feature high total hydraulic flow, with 26 gpm for the 49 hp unit and 38 gpm for the 90 hp. Both feature hydraulic oil coolers which deliver better efficiency throughout the hydraulic system, as well as safety shutdown. In addition, the Power Units have a 6 gpm auxiliary pump. Both the 49 and 90 hp power units are compatible with a broad range of products on the market. As with all Mc-
Closkey equipment, the power units have excellent access for maintenance with their open access, saving time and reducing costs. McCloskey International Limited designs and manufactures innovative crushers, impactors, trommel screeners, vibrating screeners, feeders, stacking conveyors and picking stations. Since 1985, McCloskey International has been exceeding customer expectations with reliable, durable and high performing products. McCloskey equipment is used by topsoil producers, landscape contractors, composting facilities, waste management and recycling operations, aggregate producers and mining and quarry operators to help achieve profitable volumes. For information, contact Julie Andras, Marketing manager, e-mail jandras@mccloskeyinternational.com. Call Toll free 877-876-6635, Cell 705-3413909 or visit www.mccloskeyinternational.com.
Terex Environmental Equipment launches website Terex® Environmental Equipment (TEE) has launched a dedicated customer focused and user friendly website (www. terex.com/environmentalequipment) specifically for the extensive washing product range. The dedicated website is in conjunction with the name change from Terex Woodsman to Terex Environmental Equipment. TEE is now the single provider of wood processing and environmental
equipment within Terex and offers a broad product portfolio, including: arborist hand fed chippers, biomass chippers and trommels. We will also be looking to expand our distribution by leveraging other Terex business segments in to the rental markets. All TEE products will be manufactured at Terex Corporation’s Farwell facility with the exception of the trommel line which will be manufactured in Dun-
gannon in Northern Ireland. Technical support and parts will also be managed from the Farwell facility. The website provides customers and distributors with fast, efficient and easily accessible information, when and where they need it. The site’s design is clean and simple to help users intuitively navigate to the content they want. Barry DeLau II, general manager of Terex Envi-
Powered by a Kubota engine, the power units feature high total hydraulic flow, with 26 gpm for the 49 hp unit and 38 gpm for the 90 hp. ronmental Equipment, states: “We identified the need to create a dedicated website for the TEE business line to support our customers and dealers. The new TEE website is designed to meet the needs of prospective and current customers who are looking for Terex environmental equipment and other product information. Within a couple of mouse clicks, customers can find the latest news, events and marketing information they need. With its clean, uncluttered design, this site provides rich and dynamic content focused on providing easy
access to our products and services.” For more information on Terex Woodsman products please contact Louise McDonald, Marketing Executive, 1250 Commerce Dr., Farwell, MI 48622. Call toll free at 800-953-5532 or Philippa Fisher, Group Marketing manager on +44 (0)7799 437230. Visit our website www.terex.com/environmental-equipment. Terex Corporation is a diversified global manufacturer of a broad range of equipment that is focused on delivering reliable, customer driven solutions for many applica-
tions, including the construction, infrastructure, quarrying, mining, shipping, transportation, refining, energy, utility and manufacturing industries. Terex reports in five business segments: Aerial Work Platforms; Construction, Cranes; Material Handling, Port Solutions,and Materials Processing. Terex offers financial products and services to assist in the acquisition of equipment through Terex Financial Services. More information can be found at www.terex.com.
April 2013 • WASTE HANDLING EQUIPMENT NEWS WEST • Page 19
Earth Care Farm knows compost by Kristen M. Castrataro
M
Page 20 • WASTE HANDLING EQUIPMENT NEWS WEST • April 2013
ike Merner’s composting journey has been a circuitous one. He was educated at the University of Rhode Island, where he studied agriculture at a time when society’s thinking was “better living through chemistry.” Mike became very knowledgeable about chemical pest control and crop yield increases, skills that he put to use in his landscaping business. He soon became disillusioned, however, when he began to see the damage that many of these practices were doing to soil health. As he looked for a better solution to the problem, Merner turned to Rodale’s Organic Gardening as a way to re-educate himself. He planted an organic
Once the nitrogenous materials are added, the composting begins. vegetable garden for personal use. In the 1970s, he began composting for his own use as well. Along the way, he was troubled because at home, he was practicing organic gardening, organic lawn care, and working to improve his own soil’s health, while at his landscaping business, he was still using the current chemical products for dealing with pest and weed control. Feeling hypocritical, he turned to his own compost for soil nutrition and microbial activity. MWW erner maintains, “All we have to do to raise healthy plants and animals is to return nutrients to the earth with well made compost.” At that time, organics were just beginning to gain attention in Rhode Island; so as a result, Merner
Farm Manager John Buth and Owner Mike Merner of Earth Care Farm transform gurry into rich compost with the help of their new Hyundai HL 760-9a wheel loader.
became an important part of the movement’s growth. He was one of the founders of the Rhode Island chapter of the Northeast Organic Farming Association (NOFA). In the 1980’s, he was a part of the first group of Rhode Island farmers to be awarded organic certification. Since that time, almost 30 years, Earth Care Farm has been synonymous with high quality organics in Rhode Island. The farm’s famous compost attracts gardeners and lawn care people from across Rhode Island, Massachusetts and Connecticut. Additionally, his operation specializes in custom raised beef and pork, pick your own strawberries, raspberries and rhubarb. In the past few years, the farm has offered apples, peaches, cherries and pears. Managing such a variety of products on a relatively small piece of land can be challenging. Merner handles it with the help of his Kubota LA724. He uses the mower and harrow attachments to establish and maintain his perennial crops. Most of the time however, the tractor’s front bucket is in highest demand. Merner likes to use it to load pickup trucks with the farm’s most popular product: compost. The composting process at Earth Care Farm is lengthy and requires careful management. The first step is acquiring the raw materials. Manure from the farm’s livestock starts the process. Fish gurry, a by-product of the state is fishing industry, and shellfish make up a significant portion of the nitrogen requirement for Earth Care Farm’s compost as well. Merner used to receive gurry daily from the anglers at nearby Galilee. The state’s regulations changed, severely limiting the catch for local fishermen, so his fish products now come from Quonset, RI and as far away as New Bedford, MA. A large percentage of the carbon materials for the compost comes from municipal waste such as leaves, wood chips, etc. As a way to reduce the odors that come from the composting process, Merner has weighted the compost’s carbon-to-nitrogen ratio heavily towards carbon. As a result, it takes about one year for the final product to be ready. Merner says that farm manager, John Buth, turns the piles 5-6 times per week with a Hyundai HL 7609a, a 4-cubic-yard articulated wheel loader. Usually the farm operates two wheel loaders but for now, they have four. The reason is economic. For years, Merner purchased Daewoo (and then Doosan) loaders, trading in the older models against the purchase price of the newer ones. This year when he started looking for new equipment, Kahn Tractor
EarthCareFarm
21
EarthCareFarm
from 20
& Equipment in North Franklin, CT gave him an offer he couldn’t refuse on two clearance Hyundai units. Merner is now entertaining offers for the 2005 Daewoo (complete with a brand new Tier 4 engine) and 2008 Doosan. A change in marketing Over the years, the quality of the products at Earth Care Farm has remained the same. The labeling has not. A couple years ago, Merner voluntarily pulled his organic certification because of philosophical differences with the direction “organics” is headed. This action adversely affected the organic farmers in Massachusetts, Rhode Island and Connecticut who relied on his compost. They preferred his gurry and shellfish based mixture to the municipal mixes that are sold in the area. Since Merner’s label change, those customers only have access to municipal waste compost unless they travel to northern New England for an organic alternative. Accordingly, by dropping his organic affiliation, Merner has seen a large shift in his customer base. Organic farmers are no longer able to use his product without sacrificing their own certification. The economy has exacerbated the changes. Merner observes, “We thought we’d be immune to the recession, but our customers weren’t.” Landscapers were once Merner’s largest clientele. As the economy struggled, the volume of compost purchased by landscapers decreased. In the place of these commercial clients, have arisen “the gardeners,” a customer group of community gardens, church gardens, and home gardens, the vast majority lining up to purchase Earth Care Farm compost. Merner feels there is still great, untapped potential for compost. He believes there are significant amounts of uncomposted carbonaceous materials waiting to be turned into food for the earth. He tells the story of going to an event in a LEED certified building and noticing that the meal was served on compostable plates. When he asked where the composting bins were located he was informed, “Oh, we just put them in the trash.” The irony was not lost on Merner. The mission of Earth Care Farm is to “joyfully help bring out the best and highest health from within the earth by consciously returning the best to the earth.” He sees composting as a critical component of that mission. Perhaps in time more will do the same. For more information on Earth Care Farm or to purchase one of his wheel loaders, visit their website at www.earthcarefarm.com/index.htm.
A fortuitous clearance price prompted Merner's transition from Daewoo/Doosan to Hyundai loaders.
In the staging area, carbonaceous material is stacked prior to being mixed.
Kahn Tractor & Equipment Kahn Tractor was first known as Manning Farm Supply, an agricultural supply center, established in 1948. Jim Kahn bought the business in 1961 and changed the name to Kahn Tractor & Equipment, Inc. At that time, the market area of North Franklin, Connecticut, was dominated by agriculture, our customer base consisted mostly of farmers and we primarily sold farm equipment. By 1984, the area saw a shift toward construction and industrialization. In order to meet the growing demand for construction machinery, Kahn’s took on heavy construction equipment and made several changes to our facilities to accommodate servicing the larger equipment. Our parts department expanded to accommodate increased inventory and to add a hardware store. Rental services were added to further accommodate our customers. Over the past 48 years, we have seen many changes and have continued to grow to accommodate the area’s needs. We currently carry a full line of Cub Cadet and Kubota lawn and garden tractors to meet the needs of every homeowner. For customers with larger lawns or small hobby farms, we have several models of Kubota and New Holland compact tractors. There are a wide range of mowers, post hole diggers, blades and accessories available to fit the compact tractors. There are currently several different model RTV’s on display in our showroom. We continue to carry a full line of agricultural
equipment including tractors, round and square balers, manure spreaders, choppers and tedders. We are the area hay experts! For our landscape contractors, we have a wide range of landscape and nursery equipment. Both our landscape customers and homeowners will appreciate our Stihl display. It is located in our parts room and includes many models of chainsaws, blowers and accessories. We also carry wood splitters and chippers. To meet the larger equipment needs of many contractors in the area, we carry Hyundai, New Holland and Kubota equipment. These include excavators, mini-excavators, skid steers, tractors, loaders and backhoes. To move this equipment around there are several models and sizes of trailers in stock including Interstate, Bri-Mar and Pequea. Despite all of the changes and growth that have occurred over the years, the one thing that has remained unchanged is our commitment to our customers. By preserving our relationship with our customers, we continue to be able to provide quality equipment sales, parts and service. Stop in and let us know how we can help you! For more information contact Kahn Tractor & Equipment, Jct. Routes 32 & 207, North Franklin, CT 06254. Call 860-642-7596 or toll free 800-3275243 or visit their website at www.kahntractor.com. Information was quoted from the company website.
April 2013 • WASTE HANDLING EQUIPMENT NEWS WEST • Page 21
This New Holland B95B stays busy loading material.
Steam from the cooking compost is released as farm manager John Buth turns the piles with his new Hyundai HL 760-9a.
Page 22 • WASTE HANDLING EQUIPMENT NEWS WEST • April 2013
Are You Involved In More Than One Industry? We Are Here to Help You. E SUBSCRIPTIONS S BY Y REQUEST * FREE Regional/National Solid Waste Recycling (monthly)
Regional Heavy Construction (monthly)
- Send me Ì YES Hard Hat News!
Handling Ì YES - Send me Waste Equipment News!
Hard Hat News focuses on heavy equipment construction including excavating, construction/demolition, paving, bridge building, and utility construction in the northeastern third of the United States. TITLE 1 Ì President/CEO 2 Ì Manager/Supervisor 3 Ì Other NUMBER YOUR PRIMARY BUSINESS #1, SECONDARY #2, ETC. 1 Asphalt Paving _____________________ 7 Construction Demolition _________________ 2 Concrete Paving ___________________ 8 Landscaping __________________________ 3 Oil & Stone Paving__________________ 9 Land Clearing _________________________ 4 Bridge Construction ________________ 10 Logging _____________________________ 5 Excavating ________________________ 11 Other _______________________________ 6 Utility/Underground _________________
National Aggregate
Ì
(bi-monthly)
Recycling professionals involved in the wood waste, C&D, scrap metal, asphalt & concrete, and compost recycling industries will find Waste Handling Equipment News a valuable source of new products, product innovation and site adaption. J Owner/President/VP J J J J
TITLE J Operations Manager TYPE OF BUSINESS (Check all that apply)
J Other
J Asphalt/Concrete Recycling J Scrap Metals Recycling J Ferrous J Non-Ferrous
Construction Demolition Recycling Construction Demolition Landfill Woodwaste Recycling/Land Clearing Composting
Regional Horticulture
Paid Subscription
monthly
Country Folks Ì YES - Send me GROWER! )
YES - Send me North American Quarry News!
Country Folks Grower is the regional newspaper for all segments of commercial horticulture. Each issue is filled with important information for the Greenhouse, Nursery, Garden center, Landscaper, Fruit, Vegetable Grower and Marketers.
North American Quarry News covers quarries, sand and gravel pits, HMA and ready mix concrete operations in the United States. NAQN provides a combination of strong editorial and advertising for industry professionals.
*This publication costs $24 for one year. *This publication costs $40 for two years.
Your company produces these products or services: 1 2 3 4 5
Ì Ì Ì Ì Ì
(Check All That Apply) Crushed stone and sand & gravel 6 Ì Industrial minerals Crushed stone 7 Ì Machinery/equipment manufacturer Sand and gravel 8 Ì Equipment dealer/distributor Recycled materials, concrete/asphalt 9 Ì Drilling Lime 10 Ì Blasting
(
Regional Agriculture
Paid Subscription
weekly
Ì YES - Send me Country Folks!
Business Type: K Greenhouse K Tree Fruit K Nursery
)
K Beef K Alfalfa
Small Fruit Christmas Garden Center Supplier
(monthly)
Mane Stream is a monthly horse publication reaching Maine to Northern Pennsylvania, and New Jersey. Not only does Mane Stream go to horse owners who request it, but it goes to all of our Affiliated Horse Association Members.....29 Associations Strong and Growing! In addition, issues of Mane Stream are shipped to tack shops, feed stores, stables, auction barns, and where horse people frequent.
*This publication costs $78 for two years. (Check All That Apply)
K Poultry K Corn
National Vineyard
K Horse K Soybeans
K Goat
Subscription (Paidbi-monthly )
Wine & Grape Grower offers features, news and information on growing grapes, and making and selling wines. Learn tips on how to start or improve your business.
How Many Horses Do You Have?_____
LEE PUBLICATIONS, INC. PO Box 121, 6113 State Hwy., Palatine Bridge, NY 13428 800-218-5586 • FAX 518-673-2381
SUBSCRIPTIONS 888-596-5329 email: subscriptions@leepub.com Name _______________________________________________ Farm/Business Name ___________________________________ Address ______________________________________________ ______________________________________________ City ________________________ State _____ Zip __________
Business Type: K Grape Grower K Vineyard
(Check All That Apply)
K Wines K Supplier
County ____________________Email _____________________ Phone (
) _______________Fax (
) _________________
Date ___________Signature______________________________
April 2013 • WASTE HANDLING EQUIPMENT NEWS WEST • Page 23
Business Type: K Dairy K Sheep
K K K K
K Farmers Market K Direct Market K Vegetable
Northeast Equine Market
Our premier weekly agricultural newspaper has four editions covering agriculture from Maine through North Carolina. Every issue is loaded with national, regional and local agricultural news, equipment, service advertising and auctions.
*This publication costs $47 for one year.
(Check All That Apply)
To Place A Classified Ad Phone 1 (800) 836-2888 • Fax (518) 673-2381 • E-mail: classified@leepub.com
WASTE HANDLING EQUIPMENT NEWS CLASSIFIED SECTION
Page 24 • WASTE HANDLING EQUIPMENT NEWS WEST • April 2013
Waste Mailing Address - Waste Handling Equipment News Classifieds, PO Box 121, Palatine Bridge, NY 13428 Number / Classification 20 Air Compressors 25 Air Tools 55 Appraisal Services 60 Asphalt Equipment 65 Asphalt Recycling 70 Attachments 80 Auctions 85 Backhoe/Loaders 150 Buckets 165 Business Opportunities 200 Chippers 220 Compaction Equipment 225 Composting Equipment 245 Concrete Products 250 Concrete Recycling 255 Construction Demolition 265 Construction Eq. For Rent 270 Construction Eq. For Sale 275 Construction Machinery Wanted 300 Conveyors 310 Cranes 320 Crushing Equipment 365 Demolition 375 Dozers 400 Drills 415 Employment Wanted 425 Engines 430 Excavators 470 Financial Services 495 For Rent or Lease 505 Forklifts 535 Generators 550 Gradalls 555 Graders 610 Help Wanted 635 Hoists 705 Legal Notices 745 Loaders 760 Lumber & Wood Products 780 Maintenance & Repair 805 Miscellaneous 880 Parts 890 Pavers 912 Point Of Sale 925 Pressure Washers 940 Quarry Equipment 950 Real Estate For Sale 955 Real Estate Wanted 975 Rentals 1017 Scrapers 1020 Screening Equipment 1040 Services Offered 1065 Skid Steer Loaders 1085 Snowplows 1105 Sweepers 1120 Tools 1130 Tractors 1140 Trailers 1145 Training 1170 Truck Parts & Equipment 1180 Trucks 1185 Used Equipment 1205 Wanted 1230 Wood Waste Grinders 1235 Wood Waste Recycling
Announcements
Announcements
ADVERTISING DEADLINE
Miscellaneous
MAY ISSUE
BUSINESS CARD MAGNETS only $75.00 for 250. Free Shipping. Call Beth at Lee Publications 518-673-0101 or bsnyder@leepub.com Please allow 7-10 business days for delivery
Friday, April 5th
Parts
If you would like to place a classified ad - please call Peg at
1-800-836-2888 or email classified@leepub.com Announcements
Lumber & Wood Products
HERCULES, CONTINENTAL WAU K E S H A : I n d u s t r i a l Engine Parts, M&M Surplus Sales, P.O. Box 381, Chester, NY 10918. 845-469-3597, Fax 845-469-0990.
TROMMEL BRUSHES
# # # # #
ADVERTISERS Get the best response from your advertisements by including the condition, age, price and best calling hours. Also we always recommend insertion for at least 2 times for maximum benefits. Call Peg at 1-800-836-2888
WANT TO PLACE A CLASSIFIED AD? CALL: 1-800836-2888 CHECK YOUR AD - ADVERTISERS should check their ads. Lee Publications, Inc. shall not be liable for typographical, or errors in publication except to the extent of the cost of the first months insertion of the ad, and shall also not be liable for damages due to failure to publish an ad. Adjustment for errors is limited to the cost of that portion of the ad wherein the error occurred. Report any errors to 800-836-2888 or 518-673-0111
Mfg. By
Recycling Equipment
SORTING TABLES For C&D - Shingles - Green Waste Portable or Stationary CUSTOM BUILT
Brad Kiecker 612-889-7883
www.kafkaconveyors.com
FOR SALE
DUFF BRUSH LLC Powerscreen, Wildcat, McCloskey, Retech & Others
1-877-863-3319 www.duffbrush.com
Recycling Equipment 2000 UNIVERSAL Refriner PDR96-56, 2150 hrs., u-tube halstr uckman universal refriner. Working every day. 318-422-5794
2004 Doppstadt 3060 Shredder Approx. 3500 hrs, Mechanically A-1, Ready to Work $179,995
2003 Bandit 3680 Cat Engine, Mag Head Pulley Approx. 7500 hrs, Good Machine $64,994
813-421-2757
grinderguy@askthegrinderguy.com See More Grinders and Screeners @
www.askthegrinderguy.com
Lumber & Wood Products
Lumber & Wood Products
NEED BUSINESS CARDS? Full color glossy, heavy stock. 250 ($45.00); 500 ($60.00); 1,000 ($75.00). Call your sales representative or Lee Publications 800-218-5586 and ask for Beth or 518-6730101 bsnyder@leepub.com
V I S I T
Recycling Equipment
www.wastehandling.com
www.equipmentexplorer.com • Search All of our Auction and Used Equipment Ads at One Time! Auction and Used Equipment Ads from:
• Country Folks • Country Folks Grower • Hard Hat News • North American Quarry News and • Waste Handling Equipment News
are combined into our searchable database.
www.equipmentexplorer.com
To Place A Classified Ad Phone 1 (800) 836-2888 • Fax (518) 673-2381 • E-mail: classified@leepub.com
WASTE HANDLING EQUIPMENT NEWS CLASSIFIED SECTION Waste Mailing Address - Waste Handling Equipment News Classifieds, PO Box 121, Palatine Bridge, NY 13428 Screening Equipment
Screening Equipment
Mobile Compact Screening Solutions Reduce volume Reuse materials Jody Kinghan, Global Development Manager Ultra Plant International Ltd Farlough Road, Dungannon, Northern Ireland BT71 4DU T. 028 8774 7582 • F. 028 8774 6387 • M. 07891 819 250 E. jody@ultraplantltd.com • W. www.ultraplantltd.com
Services Offered
Wood Waste Grinders
CANVAS PRINTS: All sizes. Mounted or Unmounted. Just bring in or send us your photo at Lee Publications. Call 518673-0101 bsnyder@leepub.com
1998 VERMEER TG400A tub grinder. 5000 hours, ready to work, duplex drum, $60,000. 229-227-9107.
Wood Waste Grinders
Wood Waste Grinders
UNIVERSAL REFINER VERTICAL SHAFT GRINDERS
650HP - Volvo Engine 600HP - John UR 92 Grinder Deere Engine - Demo Unit UR 82 Grinder - Rental Unit Price: $430,000 Price: $290,000 E-mail: theco@theco-inc.com Phone: 1-800-776-0335
Calendar of Events WASTE HANDLING EQUIPMENT NEWS
MAY 5-8 NYS Solid Waste & Recycling Conference and Trade Show Bolton Landing, NY. On Internet at www.nyfederation.org MAY 21-23 WasteExpo 2013 Ernest N. Morial Convention Center, New Orleans, LA. With over 550 exhibiting companies, 40 conference sessions and workshops and over 11,000 total participants, no other show comes close to the size and scope of WasteExpo. Whether you come from the public sector, a small, medium or large private sector waste services company or a manufacturer or supplier, WasteExpo is your once a year event. Contact Catherine Campfield,
203-358-4128. SEP 15-17 Waste to Fuels 2013 Hyatt Regency Mission Bay Spa & Marina, San Diego, CA. The Waste to Fuels Conference & Trade Show provides a forum for informing the public and private sectors of the economic and environmental significance of converting waste materials to alternative fuels such as bio-diesel and ethanol as well as renewable electric energy. Contact Gene Jones, 850-558-0609. OCT 1-3 International Construction and Utility Equipment Exposition Kentucky Exposition Center, Louisville, KY. On Internet at www.icuee.com.
1.
PHONE IT IN Just give Peggy a call at 1-800-836-2888
IT IN 2. FAX For MasterCard, Visa, American Express or Discover customers, fill out the form below completely and fax to Peggy at (518) 673-2381
3.
4. 5.
MAIL IT IN Fill out the attached form, calculate the cost, enclose your check/money order or credit card information and mail to: WHEN Classifieds, PO Box 121, Palatine Bridge, NY 13428
E-MAIL IT IN - E-mail your ad to classified@leepub.com ON-LINE - Go to www.wastehandling.com and follow the Place a Classified Ad button to place your ad 24/7!
FOR BEST RESULTS, RUN YOUR AD FOR TWO ISSUES!
$15.50 $16.00
$16.50
$17.00
$17.50
$18.00
$18.50
$19.00
$19.50
$20.00
DISPLAY ADS IN THE CLASSIFIEDS ARE $21.00 per column inch, $12.00 second zone. Maximum height 11 inches. No frequency or agency discounts. LINE ADS are one issue, $15.00 for 14 words, 50¢ each additional word. All rates are per insertion. Payment must be included with your order.
Name: (Print)_______________________________ Company Name:____________________________ Address:___________________________________ City:__________________St.:_____Zip:_________ Phone:_____________________________________ Cell:_______________________________________ Fax:_______________________________________ E-mail:_____________________________________ Payment Method: AmericanExpress Discover Visa MasterCard Acct#_______________________Exp. Date______ MM/YY
Signature_____________________Date_________ Required w/Credit Card Payment Only
April 2013 • WASTE HANDLING EQUIPMENT NEWS WEST • Page 25
E-mail announcement of your upcoming event(s) to: jcasey@leepub.com We must receive your information, plus a contact phone number, prior to the deadline that's noted under the Announcements heading on the 1st page of these WHEN Classifieds. ***
5 EASY WAYS TO PLACE A WASTE HANDLING EQUIPMENT NEWS CLASSIFIED AD
Container hook platform to transport the Keestrack Combo The very compact and high performing Combo Keestrack mobile screening plant separates easily three fractions at a maximum capacity of 250 (metric)tons an hour. The Combo, with its 17 tons is very effective for smaller screening jobs, for rental or where mobility is of the essence. The machine can be used for scalping or for precision screening. Mobility is one of the biggest assets of the Combo. Just because of this, Keestrack looked out for a alternative way of transporting the Combo. By using the standard container hook platform it is easier to transport the Combo, resulting in an even higher mobility. Next to this the cost of transport is reduced because of faster handling and because a standard service can be provided. The Keestrack Combo offers you:
And ready to go.
Drive on until the hooks can be put in place.
Page 26 • WASTE HANDLING EQUIPMENT NEWS WEST • April 2013
J.R. Merritt Controls, Inc. PRO-6H Hall effect joystick J.R. Merritt’s new PRO6H Hall effect joystick offers the same heavy duty mechanical construction as its popular PRO-6, enhanced with the improved life cycle of a noncontacting Hall effect proportional output device. This single axis joystick with excellent resistance to EMI, has standard proportional 0.5 to 4.5 VDC output with optional customengineered PWM circuits. The rugged 10mm diameter handle shaft allows for a large variety of optional handle configurations, including triggers, rocker switches, push buttons and thumb wheels. The PRO-6H features a
smooth, field adjustable friction brake with positive center detent for applications where speed must remain constant under continuous shock and vibration. Mechanical interlock is available. The PRO-6H is suitable for use on scissor lifts, aerial work platforms, bucket trucks, cranes, agricultural, mining and forestry equipment. For more information contact J.R. Merritt Controls, Inc., 55 Sperry Ave., Stratford, CT 06615. Call 800-3335762 or 203-381-0100, fax 203-381-0400, e-mail info@jrmerritt.com or visit their website at www.jrmerritt.com.
• Optimum flexibility and mobility with great performance; • Perfect results at relative low costs; • Robust and smart design with good access for maintenance, repairs and changing of wear parts; • Low machine weight and compact transport measurements; • Up to 25 percent greater fuel efficiency because of the use of a “load sensing” hydraulic system; • Quick setup time; • Low feeding height; and • Large screening surface of 2700 x 1200 mm. For more information or technical specifications contact Marcel Kerkhofs by e-mail at marketing@keestrack.net.
Lift on the truck.
LANDFILL
TRANSFER STATION
Reduce Volume and Increase Density
DEMOLITION WOOD SCRAP YARD CONTRACTOR PROCESSING
Lower Up Front Investment Lower Maintenance Costs than Hammer Mills
Minimal Maintenance Requirements
Please contact us today to learn how we can help you make more $$$
631-218-2600 info@hammelny.com www.hammelny.com
April 2013 • WASTE HANDLING EQUIPMENT NEWS WEST • Page 27
A HAMMEL Shredder can be operated for far less than any other shredder! (incl. all wear parts, fuel, and fluids)
Page 28 • WASTE HANDLING EQUIPMENT NEWS WEST • April 2013