Lifting Africa May/Jun 2020

Page 12

PRODUCTS & SERVICES

Explosion-proof hoists for Kusile coal conveyors

Condra has completed manufacture of eight explosion-proof, high-lift hoists – four of them articulated – for Tenova Bateman. All are custom-built, twospeed machines that utilise the modularity of Condra’s K Series to deliver performance capabilities precisely tailored to the individual requirements of each application. After commissioning at Kusile Power Station, the eight machines will carry out installation and maintenance work on coal conveyors. They will further boost Condra’s already substantial presence at Kusile, where the majority of overhead cranes and hoists have been supplied by this company.

capability quite quickly because of the modularity of the K-Series,” he said. “We can adapt the K-Series to an extremely wide range of requirements.” Condra is generally acknowledged as sub-Saharan Africa’s leader in high-lift cranes and hoists, a reputation which probably worked in favour of securing the Tenova Bateman order. Local manufacture would also have been a factor; there is increasing awareness that local sourcing will be one of the anchors upon which economic recovery in South Africa will rely.

Lifting capacities, lifting speeds and lift heights vary greatly among the eight hoists. Loads of between one and seven tons will be managed by fixed lifting speeds ranging from 1,25 to 12 metres per minute, and by lift heights of between 10 metres and 41 metres. Noteworthy among the machine features is the articulation on four of them, allowing travel around curves away from the line of conveyor movement.

Fully covered hoists provide lifting capacities to 32 tons, while opendrum units have capacities in excess of 250 tons. Features on all models include electromagnetic DC disc brakes, standard frame-size motors with parallel rotors, double-acting limit switches, solid bronze rope guides and totally enclosed splashlubricated gearboxes. Condra uses silumin rotor cores to enhance K-Series motor-starting torque in the high-lift role, and offers optional variable speed control on the drives to enable precise load positioning even on lifts of 100 metres and more.

Also unusual are the higher than normal lift heights on six of the units: 17 metres (two machines), 18.5, 21, 32, and 41 metres. A Condra spokesman explained that even the 10 and 11,5-metre lift heights of the remaining two hoists can be looked upon as high-lift. “Hoist with this sort of lift height are not off-the-shelf deliveries for most crane companies, but we can offer and deliver a high-lift 12

Lifting Africa - May/Jun 2020

The modular design of the K-Series allows rapid modification to specific high-lift application requirements (including lift speeds as quick as 1 metre per second – fifteen times faster than the 4 metres per minute found in many standard applications), resulting in delivery

times that are usually the shortest available. Standard hoist speeds go up to 18 metres per minute. After delivery, the hoists for Tenova Bateman will be installed in the coal silos and at various maintenance stations along Kusile’s conveyor route, where they will help with the installation, removal and maintenance of motors, gearboxes, rollers, pulleys and the conveyors themselves. All have been flame-proofed to IP65 standard, and explosion-proofed to Class II Zone 21 specification, countering the combustible nature of coal dust which can explode if sparked. Among other things, the proofing involved fitting special gland seals between the motors and the hoists themselves, and sealing all covers and panels. Articulated crawls have been fitted with modified cross-heads and assemblies that allow them to negotiate bends in the supporting I beams, which follow curved routes to take the hoists and their loads away from the conveyor line. Brass bushes on the articulation prevent any possibility of sparking. During manufacture, all welds were inspected at every stage, and all eight machines were completed with a special anti-corrosive paint specification.

Condra, +27 (0) 11 776 6000, sales@condra.co.za, www.condra.co.za


Turn static files into dynamic content formats.

Create a flipbook

Articles inside

Proof load test water bags

14min
pages 42-48

XCMG MEWPS market growing

1min
page 39

SPREADER BEAMS

3min
pages 40-41

The first Jekko SPX532

1min
page 38

Lifting Equipment training, plant audits, registers and codes of practice

11min
pages 34-37

MOBILE CRANES

1min
pages 32-33

Hiab launched new MULTILIFT Optima

1min
page 31

Mistubishi Masslift ready to lift SA businesses

2min
page 30

The gamechanger in crawler cranes ideal in tight spots

1min
page 25

LIFTKET – Electric Chain Hoists “MADE IN GERMANY

2min
pages 20-21

Grantry lifting taken to the next level

2min
pages 18-19

Lithhuim-ion outpacing battery

6min
pages 28-29

Manitowoc launched the new MLC150-1 crawler crane

3min
pages 26-27

When once round the world just isn’t enough

3min
page 24

40 Years of experience in the making of constuction equipment and lifting accessories

2min
pages 22-23

The importance of ergonomics in commercial vehicle production

4min
pages 16-17

Explosion proof hoists for kusile coal conveyors

3min
page 12

Trends in the Lifting Market from Piet Otto

4min
page 7

From the Chairmans Desk

3min
page 6

A crane can only be as good as the sum of its parts

4min
pages 14-15

Trends in the Lifting Market from Emile Berning

5min
pages 10-11

OZ Lifting expands electric chain hoist range

2min
page 13

INDUSTRY NEWS

5min
pages 8-9

XCMG expanding its local footprint

2min
pages 4-5
Issuu converts static files into: digital portfolios, online yearbooks, online catalogs, digital photo albums and more. Sign up and create your flipbook.