Security Seals - for the Transportation Industry Securities seals are now being utilized in the transport market to make sure that trailers, containers and rail automobiles bring items are not tampered with. This is done to protect the final location ports of the items as well as to safeguard completion user of the product. A container shipped from abroad to an U.S.A port has to be protected so that upon arrival it is safe to open and also a trailer bring foodstuff from Canada to the U.S.A has to be secured as well since the consumer needs to be safeguarded from somebody tampering with the food supply. C-TPAT requires that trailers, containers, and rail cars getting in the USA are secured so that custom-mades officers can examine to see to it that the load was not tampered with between the origin point and the destination. These security seals have to meet the criteria of ISO17712 so that they are tough to cut and more difficult yet to damage. In October 2008 all significant shipping lines made it mandatory that any freight they are bring will certainly have a ISO17712 authorized high security seal. There are two major kinds of security seals: Bolt Seals - Made use of generally on containers as they are very hard to cut, typically requiring bolt cutters with 36-inch long deals with, and the container is arriving at a facility that has these tools to open the container. Cable Seals - Made use of mainly on rail cars and trailers, as they are simpler to cut, as the driver normally needs to cut them off of the truck trailers themselves and bring the big bolt cutters inside the truck isn't really suggested by customs. Security Seals have 2 major functions: First is to show if they cargo has been tampered with, did anyone get in the trailer or container after the load left the stockroom. Second, to prevent theft as the bolt seals are very hard to cut and without proper devices they will not be cut. Security seals are not implied to prevent anyone from damaging the freight, they are indicated to show if someone did tamper with the freight. This is a crucial distinction as many carriers believe that the security seal provides more defense than it really does. The security seal is developed so that if it is tampered with it cannot be reused to hide the tampering. A quality security seal, one authorized by ISO17712 and used for C-TPAT ought to be unusable after being tampered with. It must in theory be damaged. Due to the strict compliance required by ISO17712 and C-TPAT there are only five to six major makers as the factories have to keep ISO9001 requirements to show that the quality acquired from the samples that are checked is true when mass production is performed. If your company is using security seals you need to see to it that the quality is there as the cost of a trailer, container or rail automobile appearing unsecured would be very high. Your load would not be allowed to enter the U.S.A and would be held up until a full
investigation by the custom-mades officers was carried out in order to determine exactly what occurred and to decide if the load is safe to go into the country. If you want more information and updates regarding security seals in Singapore and security seals suppliers then you should visit www.thegreenbook.com , you can find a wide range of products and services.