2014 August
Smart encoders & actuators
Change-over at your fingertips LDT10 is the HMI touch panel specifically designed • The NETWORK screen features the actuators available in the network while the RD CONFIG screen is to easily interface and configure Lika RD rotary intended to configure the work parameters (velociactuators, so auxiliary axes are more intuitive to opety, acceleration, deceleration, ...). rate and change-over operations become as fast as one • The RECIPES screen allows to collect information touch. on the specific process (i.e. work cycle of each actuator, travel, …) and save it in recipes. LDT10 is the HMI touch panel designed to interface, set up and operate the whole series of RD rotary actua- • The HOME PAGE screen is always available at the operator’s fingertips: recipes are listed and ready to tors with RS-485 Modbus interface. Our goal was to be selected: just one touch to start the production create an HMI that is intuitive to use and does not for the greatest simplicity and operational agility. require any specific know-how; thus you have not to cope with daunting experiences and can focus on your own business. You need to cut set-up time and LDT10 comes in a 7-inch 16:9 format LCD display with reduce downtimes while preventing errors at the same resistive touch screen panel. Its rugged construction time. Now you can with LDT10, in just one touch: a complies with NEMA4 and IP65 protection ratings and great advantage when small-batches, one-off items allows for use in typically industrial environments. and just-in-time productions call for frequent format adjustments, especially in multi-axes systems such as mold changers for the plastics industry, mobile stops, Panel outer dimensions (W x H x D) packaging and woodworking machineries, labelling 204.4 mm / 8.04” 151 mm / 5.94” 26.5 mm / 1.04” machines. LDT10 is intended to connect one single actuator (point-to-point connection), an array of actuators and Panel cut-out dimensions (W x H) even an array of different models of actuators (such as 191.5 mm / 7.54” 138 mm / 5.43” RD1A along with RD4 and RD5) in the same network. Few pages with basic menus and commands enable a user-friendly approach.