2019 March
Smart encoders & actuators CMYK 64, 60, 65, 55
CMYK 90, 0, 60, 0
PANTONE BRIGHT GREEN C
PANTONE BLACK 7 C RGB
0, 176, 139
RGB
61, 57, 53
RAL
8019
Ethernet encoders & converters for the advanced factory Lika Electronic is a key player in the manufacturing of encoders and converters with Ethernet and fieldbus technologies and offers one of the most comprehensive ranges in the market. It includes Profinet, Ethernet/IP, EtherCAT, POWERLINK, and MODBUS TCP, i.e. the five protocols that command over 80 percent of the Industrial Ethernet market share globally, as well as the standard fieldbus protocols CANopen, Profibus, DeviceNet, and MODBUS RTU.
All Ethernet encoders from Lika are available in the following series: • EM- series: low cost 27-bit multiturn encoders equipped with robust magnetic technology for standard applications; • HS- series: 18-bit singleturn optical encoders for finest accuracy demands; • HM- series: 30-bit high-resolution multiturn, optical technology, aimed at high-end applications; • XAC- series: singleturn and multiturn encoders with ATEX certification for use in zones 1, 2, 21, 22. They are designed in a complete selection of mechanical models with flanges in the diameter 58 and 77 mm: solid shaft version with 6, 8, 9.52, 10 and 12 mm (0.24”, 0.31”, 3/8”, 0.39”, 0.47”) diameter and servo or clamp flange mounting; and blind hollow shaft version with 14 and 15 mm (0.55”, 0.59”) diameter. The full compliance of both the hardware and the software to the protocols, the integration of the complete set of programming functions (position and velocity readout, scaling, preset, code sequence, …), and the advanced diagnostics, even via integrated web server, enable improved performances and allow to achieve robustness, efficiency, versatility, integrability, and productivity that are required by the most advanced industrial
systems. Lika Electronic further offers the comprehensive series of IF55 converters. IF55 converters allow to integrate encoders with SSI interface, both rotary and linear, into any of the above mentioned Ethernet and fieldbus industrial networks. They are designed in a robust metal enclosure with IP65 protection rate and can be mounted on DIN TS35 rails by means of a clip. They are perfect for retrofitting as well as for installations where space is constricted, for instance they enable to mount compact linear and bearingless encoders or small rotary encoders (Ø 36 mm!) in place of bigger Ø 58 mm Ethernet/fieldbus standard encoders.