Free download 000-121 braindumps and vce practice test

IBM

000-121 Virtualization Technical Support for IBM i -v1

http://killexams.com/exam-detail/000-121

QUESTION: 39 What IBM software is the minimum required to share an IBM tape library connected to multiple IBM i partitions using NPIV?

A. VIO Server B. Tivoli Storage Manager C. Media and Storage Extensions D. Backup and Recovery Media Services

Answer: A

QUESTION: 40 A POWER7 server is being configured with 1 hosting IBM i partition and 4 client IBM i partitions. All partitions will run IBM i 7.1, TR4. The hosting partition is providing network support to the client partitions and needs both redundancy and best bandwidth.

What connectivity on the host partition will support these requirements?

A. Configure two or more Ethernet lines. Use the lines to create redundant bridges to the internal vLANs used by the client partitions.

B. Using two or more physical Ethernet resources configure an aggregated link to the switch and use this for IP address of the host partition.

C. Configure two or more Ethernet lines. Create a Virtual IP address for the host partition. Configure Showler routes to the local network for load balancing.

D. Using two or more physical Ethernet resources configure an aggregated link to the switch and use this for the bridge to the internal vLANs used by the client partitions.

Answer: D

QUESTION: 41 An administrator is planning to update a POWER blade server managed with Integrated Virtualization Manager (IVM) from version 1.5 to version 2.2 What should the administrator take into consideration?

A. The migration can only occur using a Serial Over LAN (SOL) console.

B. All client partitions should be shut down before starting the migration to avoid data corruption.

C. The partition profile data will need to be saved before the migration and restored once the migration is complete.

D. The administrator should use the Advanced Management Module (AMM) interface to specify the location of the migration DVD.

16

Answer: B

QUESTION: 42 A customer has a Power Systems server which has its FSP directly connected to the HMC on port HMC1. They want to be able to access the ASMI via their desks rather than through the HMC interface. What method will allow this to occur?

A. Re-run the “Add Managed System” wizard to configure both internal and external access.

B. Configure ASMI pass through on the HMC using a non-standard port. Create a shortcut to the HMC’s IP address using that port.

C. Attach a serial-to-Ethernet converter to the appropriate port on the rear of the CEC. Connect and configure the Ethernet cable on the HMC. D. Manually configure an accessible static IP address to the ESP’s second Ethernet port, HMC2, attach the port to the network, and use the new address from the workstations.

Answer: D

QUESTION: 43

In order to suspend an IBM i partition1 which hardware resources need to be virtualized?

A. All resources B. All disk resources C. All SCSI resources D. All networking resources

Answer: A

QUESTION: 44 A tape adapter needs to be moved from one partition to another. On the HMC, after selecting the partition which currently owns the adapter, the path below is followed: Dynamic Logical Partitioning --> Physical Adapters --> Move or Remove After selecting the appropriate resource and target partition, “OK” is selected. The HMC returns the following error “Dynamic remove of I/O resources failed: The I/O slot dynamic logical partitioning operation failed.” What is the most likely cause of this failure?

A. The tape device attached to the adapter is varied-on.

B. The tape device attached to the adapter has media mounted.

C. The tape device attached to the adapter is not connected to a power source.

D. The adapter slot must be powered-oft through SST prior to the dynamic move operation.

17

Answer: A

QUESTION: 45 An administrator is setting up IBM i in Partition 2 of a POWER Blade, in blade slot 9 of a BladeCenter H. What is used to access the IBM i console during the initial setup of a client IBM i partition?

A. Telnet to the VIO Server using port 2302.

B. Use the BladeCenter Advanced Management Module (AMM) Serial over LAN (SoL) connection to the VIO Server console.

C. Sign on to the BladeCenter Advanced Management Module (AMM). Run the AMM command: env -T system: blade[9]:partition[2]>console D. Define a virtual LAN connection in VIO Server from IBM I to an external LAN. Use IBM i LAN console to provide the TCP/IP configuration for the console.

Answer: D

QUESTION: 46 While creating a new partition and choosing appropriate I/O resources, nothing appears on the Tagged I/O screen to be selected as a “Load Source.” Which of the following could cause this to happen?

A. The CEO is not in “standby’ mode.

B. The disk attached to the controller is not powered-on.

C. Resources are only marked as Desired, not as Required.

D. Supported resources for a load source adapter have not been included in the profile.

Answer: C

QUESTION: 47 There are three Power Systems servers with redundant FSPs, and two HMCs. One HMC is in the data center while the second is in operations. Each HMC is connected to its own private network and each of the three systems are connected to both HMCs. Two of the Power Systems servers and the HMC in the data center have been moved across the room. They have been reconnected to the HMC network, and power has been applied to the HMC and the first server. On the data center HMC the server shows up twice, once with “Authentication failed” and the second with “no connection.” Connecting to ASM yields “incorrect password” on the first instance, but works on the second instance. What the most likely cause?

A. The firmware on the service processors is out of sync.

18

B. The service processors have different HMC access passwords.

C. The data center and operations HMCs are now on the same network.

D. Power was applied to the server before the HMC was up and running.

Answer: C

QUESTION: 48 A customer has a POWER6 520, with a 4-port Host Ethernet Adapter being shared by two partitions. The customer is migrating to a 6-core Power 720. One partition will need one 100Mb port to connect to an older Ethernet switch. The customer wants both partitions to run independently from one another, and provide redundancy at the adapter level What is the minimum necessary to support this requirement?

A. Two 4-port 1Gb Ethernet Adapters.

B. Four 4-port 1Gb Ethernet Adapters C. One 4-port Host Ethernet Adapter in the 720 and one 4-port 1Gb Ethernet adapter D. One 4-port 1Gb Ethernet Adapters and one 2-Port 10/100/1000 Base-TX Ethernet PCI Express adapter

Answer: B

QUESTION: 49

What is the correct method to install a firmware update on a single-image system?

A. Load the firmware CD to the optical drive and perform a LODRUN operation.

B. Download the firmware and burn it to a CD, then perform a D-side manual IPL. C. From the DSPEMWSTS screen, use the function to “Update firmware from service machine.�

D. Install the appropriate firmware PTF package to the IBM i partition and IPL the partition.

Answer: D

QUESTION: 50 What type of server and client adapters must be configured on the HMC to support virtualized disk presented from a V7000 SAN to an IBM i client partition?

A. One NPIV server adapter One NPIV client adapter B. One SCSI server adapter One ISCSI client adapter C. One vSCSI server adapter One vSCSI client adapter D. One Fibre Channel server adapter One Fibre Channel client adapter

19

Answer: C

QUESTION: 51 A customer is moving two AIX partitions from an older System p server to a new POWER7 server running IBM i. One partition requires 1.0 processor the other .5. How many AIX licenses are required?

A. 0 B. 1 C. 2 D. 1.5

Answer: C

20

For More exams visit https://killexams.com/vendors-exam-list

Kill your exam at First Attempt....Guaranteed!