Lim Battery CTEK List 2013 by Lim battery

2013

CTEK Products Brochure

Lim Battery & Electrical Co. Tel: (65) 6338 1138, 6242 1138, 6242 2822 Fax: (65) 6242 2282 Web: http://limbat.com.sg Email: sunking@limbat.com.sg

Lim Battery & Electrical Co. - CTEK Products Brochure 2013

About CTEK CTEK offers the market high-quality, reliable chargers and accessories that are effective, user friendly and, most importantly, safe (for the user, the vehicle electronics, the battery and the charger). About 400 million lead-acid batteries are manufactured around the world each year. Each one requires charging. If each battery receives proper care and charging, battery life is significantly extended (about 2-3 times longer than a battery that does not receive regular care and charging). This leads to greater protection of the environment, clear financial savings and greater vehicle reliability.

Environment: Great savings in the raw material lead (approx. 7 kg lead/car battery), which is in short supply, and great cutbacks in heavy transports factory-warehouse-dealer-retailer. Economy: Investing in a charger saves on both unnecessary and early battery purchases, service vehicles and any transport expenses to solve an unnecessary problem. Reliability: If you care for the battery properly, you avoid inconvenient surprises with â&#x20AC;&#x153;dead batteriesâ&#x20AC;?, which often happen at the worst possible time.

CTEK products are award-winning:

CTEK chargers are used by:

Lim Battery & Electrical Co. - CTEK Products Brochure 2013

Adds On

Lim Battery & Electrical Co. - CTEK Products Brochure 2013 Product ID: 56-260

Comfort Connect Eyelet M6 â&#x20AC;&#x201C; 56-260 A practical quick connector for those with batteries that are difficult to access or are hidden. The eyelet terminals are fitted to the battery, giving effortless connection without the need of actually reaching the battery. Comfort Connect â&#x20AC;&#x201C; Eyelet is available in three different sizes for different battery terminal sizes. Eyelet: M6 (6,4 mm) Cable length on all: 40 cm It is delivered with a 2-year warranty.

Lim Battery & Electrical Co. - CTEK Products Brochure 2013 Product ID: 56-261

Comfort Connect Eyelet M8 â&#x20AC;&#x201C; 56-261 A practical quick connector for those with batteries that are difficult to access or are hidden. The eyelet terminals are fitted to the battery, giving effortless connection without the need of actually reaching the battery. Comfort Connect â&#x20AC;&#x201C; Eyelet is available in three different sizes for different battery terminal sizes. Eyelet: M8 (8,4 mm) Cable length on all: 40 cm It is delivered with a 2-year warranty.

Lim Battery & Electrical Co. - CTEK Products Brochure 2013 Product ID: 56-263

Comfort Connect Cig Plug â&#x20AC;&#x201C; 56-263 This is a quick connector for truly trouble-free charging. The battery is charged through the vehicleâ&#x20AC;&#x2122;s 12-volt socket (previously called the cigarette lighter socket). This is a universal model that fits both 12 mm and 21 mm sockets. Cable length: 40 cm It is delivered with a 2-year warranty.

Lim Battery & Electrical Co. - CTEK Products Brochure 2013 Product ID: 56-304

Comfort Connect Extension Cable 2.5 – 56-304 Extension cable allows the CTEK charger to be used further away from the vehicle or battery. To use, simply connect the Comfort Connect Extension cable into your CTEK charger accessory plug and place the other end into the socket of the clamp or eyelet accessories that came supplied with your CTEK charger. The unique CTEK Comfort Connect system ensures a secure connection. Suitable for use with all CTEK chargers up to 10A using the Comfort Connect system. 2.5M/8´ 2” CABLE MAX 10A

Lim Battery & Electrical Co. - CTEK Products Brochure 2013 Product ID: 56-380

Comfort Indicator Panel M8 1,5m â&#x20AC;&#x201C; 56-380 This is a quick connector and indicator especially developed for panel mounting. The indicator clearly and simply shows the battery charge level. The charger is connected to the socket on the panel, which makes charging convenient, practical and straightforward. Mount the panel and route the cable to the battery. Comfort Indicator â&#x20AC;&#x201C; Panel is available with two different cable lengths. Many vehicle panels have extra space on the panel, which can be used for this model. Cable length: 150 cm Eyelet terminal: M8 (8.4mm) on both models Size connector/indicator: 35 mm x 21 mm 50 mm Fuse: 15A It is delivered with a 2-year warranty.

Lim Battery & Electrical Co. - CTEK Products Brochure 2013 Product ID: 56-382

Comfort Indicator Eyelet M8 â&#x20AC;&#x201C; 56-382 A practical combination of quick connector and indicator for those with batteries that are difficult to access. The indicator shows the batteryâ&#x20AC;&#x2122;s charge level simply and clearly. The eyelet terminals are fitted to the battery, giving effortless connection without the need of actually reaching the battery. Eyelet: M8 (8.4 mm) Cable length: 55 cm Fuse: 15A It is delivered with a 2-year warranty.

Lim Battery & Electrical Co. - CTEK Products Brochure 2013 Product ID: Bumper

Bumper Helps protect your CTEK charger from bumps and scratches. Gives extra grip on slippery surfaces. Made of durable silicon rubber material. The CTEK BUMPER fits snugly around the body of your CTEK charger. Suitable for all CTEK chargers 3.65.0Ah. Size: 168 x 70 x 43mm Weight: 0.04kg

Lim Battery & Electrical Co. - CTEK Products Brochure 2013 Product ID: BATTERY ANALYZER

Battery Analyzer The CTEK BATTERY ANALYZER tests with high accuracy the condition of all types of 12V lead-acid batteries including Wet, Maintenance Free, Ca/Ca, Gel and AGM. Easy to use it provides fast, and easy to understand results. Operating voltage range is 8–15V with a test range of 200–1 200EN. Simply connect the clamps to the battery and follow the step by step instructions on the display. The easy to read display gives clear information on the condition of any 12V lead-acid battery and advises what action is required. With no need to disconnect the battery from the vehicle, the patented technology used by the CTEK BATTERY ANALYZER is safe for the user and vehicle electronics. It is reverse polarity protected, creates no battery loads, heat or sparks. The CTEK BATTERY ANALYZER features a 2- year warranty. Type o analyzer Type of battery analyzed Min.testing voltage Max.testing voltage Resolution

Accuracy Range Resolution Accuracy

Conductance 12V Lead-Acid 8V 15V 0,1 V ± 0,1 V 200–1 200 EN 25 EN ± 25 EN

Lim Battery & Electrical Co. - CTEK Products Brochure 2013 Product ID: SMARTPASS

SMARTPASS SmartPass is an energy management unit which controls and optimises energy produced by alternators, solar cells, wind power or conventional AC/DC chargers, and distributes it to the battery banks or consumers which require energy, such as the deep cycle bank, bow thruster batteries, consumers, etc. Used together with a D250S, SmartPass provides optimal charging via CTEK’s unique staged charging cycle, which also protects your batteries. SmartPass also has an integrated ‘battery guard’ which protects deep cycle batteries from harmful total discharge and ensures that critical equipment such as radio, emergency lights and navigation systems always function. SmartPass has a temperature sensor which protects batteries against high temperatures. SmartPass is a fully automatic energy management system which can handle up to 80A for batteries of between 28-800Ah. The energy management system is IP65 classified (water jet and dust protected and approved for outdoor use). Suitable for all types of 12V lead-acid batteries. Male terminal (grey) 2pcs 14,5 mm Male terminal (black) 2pcs 14,5 mm Connection plate 2pcs Eyelet M8 (8,4 mm) on cable Temp sensor Volt

12V

Lim Battery & Electrical Co. - CTEK Products Brochure 2013 Charging current

80A

Back current drain

<1Ah/month

Ripple

<4%

Ambient temperature

-20°C to +50°C, output power is reduced automatically at high temperatures

Battery types

All types of 12V lead-acid batteries (WET, MF, Ca/Ca, AGM and GEL)

Battery capacity

28–800Ah

Dimensions

197 x 93 x 49mm (L x W x H)

Insulation class

IP65

Weight

0.74kg

Lim Battery & Electrical Co. - CTEK Products Brochure 2013

Battery Chargers

Lim Battery & Electrical Co. - CTEK Products Brochure 2013 Product ID: MXS0.8

MXS 0.8 The XS 0.8 is CTEK’s smallest 12V charger. It offers state of the art technology and is perfect for charging smaller 12V batteries that can be found in motorcycles, jet skis, ATVs and lawnmowers. It is also suitable for maintenance charging “normal- sized” batteries such as car batteries. The unique display allows the user to follow the entire charging process. The XS 0.8 is a compact and fully automatic 6-step charger for 12V batteries from 1.2-32Ah and is suitable for maintenance charging up to 100Ah. The XS 0.8 is IP 65 classified (splash and dust proof), delivers 0.8A and is designed to protect vehicle electronics. It is nonsparking, reverse polarity protected and short-circuit proof. The XS 0.8 is delivered with 5-year warranty. Auto: Fully automatic for optimal charging 12V: For all lead-acid batteries Step 5: Fully Charged Battery Step 6: Maintenance Charging Model number Volt Rated Voltage AC Charging voltage Min battery voltage Charging current Current, mains Back current drain

1047 12V 220–240VAC, 50–60Hz 14.4V 2.0V 0,8A max 0.2A rms (at full charging current) <1Ah/month

Lim Battery & Electrical Co. - CTEK Products Brochure 2013 Ripple Ambient temperature Charger type Battery types Battery capacity Dimensions Insulation class Weight

<4% -20°C to +50°C, output power is reduced automatically at high temperatures Six step, fully automatic charging cycle All types of 12V lead-acid batteries (WET, MF, Ca/Ca, AGM and GEL) 1.2–32Ah up to 100Ah for maintenance 145 x 55 x 38mm (L x W x H) IP65 0.4kg

Product ID: MXS5.0

MXS 5.0 The MXS 5.0 is a charger that offers state of the art technology that was previously only found in CTEK’s professional product range. The charger can solve a broad range of battery-related problems and is the perfect charger for those with high demands. The MXS 5.0 offers features such as battery diagnosis that shows if a battery can receive and retain a charge, a special reconditioning function that restores stratified and deeply discharged batteries, unique maintenance charging, a mode for optimised charging during cold winter days and the charging of demanding AGM batteries (i.e. Optima). The unique display allows the user to follow the entire charging process. The MXS 5.0 is a fully automatic 8-step charger that delivers selectable 0.8A or 5A to 12V batteries from 1,2-110Ah and is suitable for maintenance charging up to 160Ah. The charger is IP 65 classified (splash and dust proof), designed to protect vehicle electronics and non-sparking, reverse polarity protected and short-circuit proof. It is delivered with a 5-year warranty. 16

Lim Battery & Electrical Co. - CTEK Products Brochure 2013 Auto: Fully automatic for optimal charging 12V: For all lead-acid batteries Step 7: Fully charged battery Step 8: Maintenance charging COLD/AGM: Charging in cold conditions and AGM batteries RECOND: Recondition of deeply discharged batteries Model number Volt Rated Voltage AC Charging voltage Min battery voltage Charging current Current, mains Back current drain Ripple Ambient temperature Charger type Battery types Battery capacity Dimensions Insulation class Weight

1049 12V 220–240VAC, 50–60Hz SMALL, NORMAL: 14.4V, COLD/AGM: 14.7V, RECOND: 15.8V 2.0V 5A max 0.65A rms (at full charging current) <1Ah/month <4% -20°C to +50°C, output power is reduced automatically at high temperatures 8 step, fully automatic charging cycle All types of 12V lead-acid batteries (WET, MF, Ca/Ca, AGM and GEL) 1.2–110Ah up to 160Ah for maintenance 168 x 65 x 38mm (L x W x H) IP65 0.6kg

Lim Battery & Electrical Co. - CTEK Products Brochure 2013 Product ID: MXS5.0 TEST AND CHARGE

MXS 5.0 TEST AND CHARGE The MXS 5.0 TEST & CHARGE combines an advanced micro-processor controlled battery charger with a battery and alternator test function to provide the ultimate in battery testing, charging and maintenance. Charging â&#x20AC;&#x201D; The MXS 5.0 TEST & CHARGE provides excellent performance on batteries from 1.2Ah up to 110Ah. The charger solves a broad range of battery problems and features include a patented automatic desulphation step and a special reconditioning step that will revive and restore deeply discharged and stratified batteries. The patented Float/Pulse maintenance makes the charger ideal for long-term maintenance. The RECOND and COLD WEATHER OTION operate individually or together in both SMALL BATTERY and NORMAL BATTERY programs providing great flexibility for the user. Testing â&#x20AC;&#x201D; Three easy to use programs to test battery voltage, start power and alternator performance to provide a complete picture of battery and vehicle charging system health. The MXS 5.0 TEST & CHARGE is easy and safe to use, protects vehicle electronics, spark-free, reverse polarity protected and short circuit proof. The MXS 5.0 TEST & CHARGE features a 5-year warranty. Auto: Fully automatic for optimal charging 12V: For all lead-acid batteries 18

Lim Battery & Electrical Co. - CTEK Products Brochure 2013 Step 7: Fully charged battery Step 8: Maintenance charging COLD/AGM: Charging in cold conditions and AGM batteries RECOND: Recondition of deeply discharged batteries BATTERY: Test battery voltage START POWER: Test battery starting power ALTERNATOR: Test alternator charging performance Model number Volt Rated Voltage AC Charging voltage Min battery voltage Charging current Current, mains Back current drain Ripple Ambient temperature Charger type Battery types Battery capacity Dimensions Insulation class Weight

1066 12V 220–240VAC, 50–60Hz SMALL, NORMAL: 14.4V, COLD/AGM: 14.7V, RECOND: 15.8V 2.0V 5A max 0.65A rms (at full charging current) <1Ah/month <4% -20°C to +50°C, output power is reduced automatically at high temperatures 8 step, fully automatic charging cycle with adjustable parameters All types of 12V lead-acid batteries (WET, MF, Ca/Ca, AGM and GEL) 1.2–110Ah up to 160Ah for maintenance 168 x 65 x 38mm (L x W x H) IP65 0.6kg

Lim Battery & Electrical Co. - CTEK Products Brochure 2013 Product ID: MXS7.0

MXS 7.0 The MXS 7.0 is the perfect universal 12V charger. It is ideal for charging larger batteries such as caravan, RV, boat and car batteries. These types of vehicles often demand features that can solve a broad range of battery-related problems. The MXS 7.0 offers features such as battery diagnosis that shows if a battery can receive and retain a charge, a special reconditioning function that restores stratified and deeply discharged batteries, unique maintenance charging, a mode for optimised charging during cold winter days and the charging of demanding AGM batteries (i.e. Optima). It also has a power supply mode which allows the battery to be disconnected from the vehicle without losing important configurations. The MXS 7.0 is a fully automatic 8-step charger that delivers 7A to 12V batteries from 14â&#x20AC;&#x201C;150Ah and is suitable for maintenance charging up to 225Ah. The charger is IP 65 classified (splash and dust proof), designed to protect vehicle electronics and non-sparking, reverse polarity protected and short-circuit proof. It is delivered with a 5-year warranty. Auto: Fully automatic for optimal charging 12V: For all lead-acid batteries Fully Charged Battery / Maintenance Charging COLD/AGM: Charging in cold conditions and AGM batteries 20

Lim Battery & Electrical Co. - CTEK Products Brochure 2013 RECOND: Recondition of deeply discharged batteries SUPPLY: Use the charger as a power supply Model number Volt Rated Voltage AC Charging voltage Min battery voltage Charging current Current, mains Back current drain Ripple Ambient temperature Charger type Battery types Battery capacity Dimensions Insulation class Weight

1053 12V 220–240VAC, 50–60Hz 7.2V 2.0V 7A max 1.2A rms (at full charging current) <1Ah/month <4% -20°C to +50°C, output power is reduced automatically at high temperatures 8 step, fully automatic charging cycle All types of 12V lead-acid batteries (WET, MF, Ca/Ca, AGM and GEL) 14–150Ah up to 225Ah for maintenance 191 x 89 x 48mm (L x W x H) IP65 0.8kg

Product ID: MXS10

MXS 10 The MXS 10 is a charger that offers state of the art technology. It is ideal for professional use and excellent in workshops, caravans, RVs, boats or cars. The MXS 10 is perfect for solving a broad range of 21

Lim Battery & Electrical Co. - CTEK Products Brochure 2013 battery problems. It offers features such as battery diagnosis that shows if a battery can receive and retain a charge, a special reconditioning function that restores stratified and deeply discharged batteries, unique maintenance charging and a temperature sensor for optimised charging regardless of the weather conditions. It also has a power supply mode which allows the battery to be disconnected from the vehicle without losing important configurations. The unique display allows the user to follow the entire charging process. The MXS 10 is a fully automatic 8-step charger that delivers 10A to 12V batteries from 20–200Ah and is suitable for maintenance charging up to 300Ah. The charger is IP 65 classified (splash and dust proof), designed to protect vehicle electronics and non-sparking, reverse polarity protected and short-circuit proof. It is delivered with a 2-year warranty. Auto: Fully automatic for optimal charging 12V: For all lead-acid batteries Step 7: Fully charged battery Step 8: Maintenance charging Temperature sensor COLD/AGM: Charging in cold conditions and AGM batteries RECOND: Recondition of deeply discharged batteries SUPPLY: Use the charger as a power supply Model number Volt Rated Voltage AC Charging voltage Min battery voltage Charging current Current, mains Back current drain Ripple Ambient temperature Charger type Battery types Battery capacity Dimensions Insulation class Weight

1046 12V 220–240VAC, 50–60Hz NORMAL: 14.4V, COLD/AGM: 14.7V, RECOND: 15.8V, SUPPLY: 13.6V 2.0V 10A max 1.0A rms (at full charging current) <1Ah/month <4% -20°C to +50°C, output power is reduced automatically at high temperatures 8 step, fully automatic charging cycle All types of 12V lead-acid batteries (WET, MF, Ca/Ca, AGM and GEL) 20–200Ah, up to 300Ah for maintenance 197 x 93 x 49mm (L x W x H) IP65 0.8kg

Lim Battery & Electrical Co. - CTEK Products Brochure 2013 Product ID: MXS25

MXS 25 The MXS 25 is a professional 12V charger. It offers efficient and fast charging and is ideal in workshops, caravans, RVs and boats. The MXS 25 is equipped with all necessary features and functions to solve a broad range of battery related problems. It offers features such as battery diagnosis that shows if a battery can receive and retain a charge, a special reconditioning function that restores stratified and deeply discharged batteries, unique maintenance charging and a temperature sensor for optimised charging regardless of the weather conditions. It also has a power supply mode which allows the battery to be disconnected from the vehicle without losing important configurations. The MXS 25 is a fully automatic 8-step charger that delivers 25A to 12V batteries from 40â&#x20AC;&#x201C;500Ah. The charger is IP 44 classified (outdoor use), designed to protect vehicle electronics and non-sparking, reverse polarity protected and short-circuit proof. It is delivered with a 2-year warranty. Supplied with clamps, temp sensor on cable. Auto: Fully automatic for optimal charging 12V: For all lead-acid batteries Fully Charged Battery / Maintenance Charging Temperature sensor 23

1055 12V 220–240VAC, 50–60Hz NORMAL: 14.4V, RECOND: 15.8V, SUPPLY: 13.6V 2.0V 25A max 2.9A rms (at full charging current) <1Ah/month <4% -20°C to +50°C, output power is reduced automatically at high temperatures 8 step, fully automatic charging cycle All types of 12V lead-acid batteries (WET, MF, Ca/Ca, AGM and GEL) 40–500Ah up to 500Ah for maintenance 235 x 130 x 65mm (L x W x H) IP44 1.9kg

Product ID: MXT4.0

MXT 4.0 The MXT 4.0 is a cost-effective charger, suitable for smaller 24V batteries. The MXT 4.0 is ideal for maintenance charging of larger fleets with 24V vehicles, backup systems, piste machinery and 24

Lim Battery & Electrical Co. - CTEK Products Brochure 2013 wheelchairs, etc. The MXT 4.0 is equipped with all necessary features and functions to solve a broad range of battery related problems. It offers features such as battery diagnosis that shows if a battery can receive and retain a charge, a special reconditioning function that restores stratified and deeply discharged batteries, unique maintenance charging, a mode for optimised charging during cold winter days and the charging of demanding AGM batteries (i.e. Optima). The MXS 4.0 is a fully automatic 8-step charger that delivers 4A to 24V batteries from 8–100Ah and is suitable for maintenance charging up to 250Ah. The charger is IP 65 classified (splash and dust proof) and compatible with the electronics of a vehicle. It is non-sparking, reverse polarity protected and shortcircuit proof. The MXS 4.0 is delivered with a 2-year warranty. COLD/AGM: Charging in cold conditions and AGM batteries RECOND: Recondition of deeply discharged batteries Model number Volt Rated Voltage AC Charging voltage Min battery voltage Charging current Current, mains Back current drain Ripple Ambient temperature Charger type Battery types Battery capacity Dimensions Insulation class Weight

1057 24V 220–240VAC, 50–60Hz NORMAL: 28.8V, COLD/AGM: 29.4V, RECOND: 31.4V 2.0V 4A max 1.2A rms (at full charging current) <1Ah/month <5% -20°C to +50°C, output power is reduced automatically at high temperatures 8 step, fully automatic charging cycle All types of 24V lead-acid batteries (WET, MF, Ca/Ca, AGM and GEL) 8–100Ah up to 250Ah for maintenance 191 x 89 x 48mm (L x W x H) IP65 0.8kg

Lim Battery & Electrical Co. - CTEK Products Brochure 2013 Product ID: MXT14

MXT 14 The MXT 14 is a professional 24V charger. It is developed for commercial vehicles where the batteries are put under considerable strain and is ideal for busses, trucks and CV workshops. The MXS 14 is equipped with all necessary features and functions to solve a broad range of battery related problems. It offers features such as battery diagnosis that shows if a battery can receive and retain a charge, a special reconditioning function that restores stratified and deeply discharged batteries, unique maintenance charging and a temperature sensor for optimised charging regardless of the weather conditions. It also has a power supply mode which allows the battery to be disconnected from the vehicle without losing important configurations. The MXT 14 is a fully automatic 8-step charger that delivers 14A to 24V batteries from 28â&#x20AC;&#x201C;300Ah and is suitable for maintenance charging up to 500Ah. The charger is IP 44 classified (outdoor use), designed to protect vehicle electronics and non-sparking, reverse polarity protected and short-circuit proof. It is delivered with a 2-year warranty. Supplied with clamps, temp sensor on cable. RECOND: Recondition of deeply discharged batteries SUPPLY: Use the charger as a power supply Model number

1056

Lim Battery & Electrical Co. - CTEK Products Brochure 2013 Volt Rated Voltage AC Charging voltage Min battery voltage Charging current Current, mains Back current drain Ripple Ambient temperature Charger type Battery types Battery capacity Dimensions Insulation class Weight

24V 220–240VAC, 50–60Hz NORMAL: 28.8V, RECOND: 31.6V, SUPPLY: 27.2V 2.0V 14A max 2.9A rms (at full charging current) <1Ah/month <4% -20°C to +50°C, output power is reduced automatically at high temperatures 8 step, fully automatic charging cycle All types of 24V lead-acid batteries (WET, MF, Ca/Ca, AGM and GEL) 28–300Ah up to 500Ah for maintenance 235 x 130 x 65mm (L x W x H) IP44 1.9kg

Product ID: D250S Product ID: D250SP Product ID: D250S Dual

D250S DUAL The D250S DUAL charger obtains its energy from DC sources such as alternators, solar panels or wind power and optimises this power to meet the charging requirements of different battery banks. The 27

Lim Battery & Electrical Co. - CTEK Products Brochure 2013 D250S DUAL automatically selects the best connected DC energy source (of 2) for the purpose and switches between these energy sources to achieve high efficiency multi-stage charging. The D250S DUAL is particularly suitable for charging caravans, motor caravans, boats and second homes that do not have access to grid power supplies. Charging automatically starts as soon as DC energy is provided to the charger, such as from alternators when a vehicle is started or from solar panels when connected. The D250S DUAL has a temperature sensor which ensures optimal charging voltages at all temperatures. The D250S DUAL ensures that your batteries are always in good condition, quick charging and long battery lifetimes. The D250S DUAL is a fully automatic 5-stage charger that supplies 20A to 12V batteries of 40-300Ah. The charger is IP65 classified (water jet and dust protected and approved for outdoor use), protects vehicle electronics and is suitable for all types of lead-acid batteries (Wet, MF, Gel, AGM). It is supplied with a 2 year guarantee. Male terminal (grey) 2pcs 14,5 mm Male terminal (black) 2pcs 14,5 mm Temp sensor Volt Charging voltage Charging current Back current drain Ripple Ambient temperature Charger type Battery types Battery capacity Dimensions Insulation class Weight

12V 14.4V at 25°C, temperature compensated 20A <1Ah/month <4% -20°C to +50°C, output power is reduced automatically at high temperatures 5-step fully automatic charging All types of 12V lead-acid batteries (WET, MF, Ca/Ca, AGM and GEL) 40–300Ah 197 x 93 x 49mm (L x W x H) IP65 0.73kg

Lim Battery & Electrical Co. - CTEK Products Brochure 2013 Product ID: MXTS70

MXTS 70 The MXTS 70 is a very powerful workshop charger with state of the art technology. It is developed to serve both 12V and 24V batteries, offers very sophisticated technology and is extremely user friendly. The MXTS 70 is featured with different displays showing the status of charging, charge voltage, current, charge time (h) and energy indication (Ah) for battery condition control. The MXTS 70 is equipped with all necessary features and functions required for professional battery care at a workshop, such as: - Selectable modes for optimal battery size adaptation - Selectable charge algorithm for best flexibility - Selectable power supply mode for constant voltage output of 13.6V (max 70A) or 27.2V (max 35A) - Patented desulphation function - Reconditioning function to restore stratified and deeply discharged batteries - Unique float/pulse maintenance charging

Lim Battery & Electrical Co. - CTEK Products Brochure 2013 - Diagnostic features to determine if a battery can receive and retain a charge - Temperature sensor for optimised charging at all times

The MXTS 70 is a fully automatic 8-step charger that delivers selectable 70A/12V or 35A/24V to batteries from 40-1500Ah for 12V and 200-750Ah for 24V. The charger is IP 20 classified, housed in heavy duty aluminium for rough environments and designed to protect vehicle electronics. It is non-sparking, reverse polarity protected and short-circuit proof. The MXTS 70 is delivered with a 2-year warranty. - Selectable battery voltage 12 V or 24 V. -

Selectable maximum charge current for battery size adaption. Currents selectable from 20 A to 50 A in 10 A step for 12 V and 10 A to 25 A in 5 A step for 24 V systems.

- Unique 8 step charge algorithm for perfect battery care. - Two step maintenance charge to handle parallel DC consumers during charging. - Selectable power supply mode for constant voltage output of 13.6 V, max 70 A or 27.2 V, max 35 A. - Local interface with charger status and a large charge voltage and current display. - Value display for charge time [h] and energy [Ah] indication for battery condition control. - Housed in heavy duty aluminium housing for rugged professional use. - Equipped with a patented battery desulphation program. - Battery analysis after completed charge cycle to report faulty battery. - Recond program to even out cell charge levels of deeply discharged batteries. -

Optional battery temperature compensation of charge cycle. Just plug the sensor in the charger and activate the temperature compensation.

- Fully protected against short circuit and reverse polarity of charge cables. - Detachable cables and heavy duty clamps. Selectable battery voltage 12 V or 24 V Selectable maximum charge current for battery size adaption Optional battery temperature compensation of charge cycle 30

Lim Battery & Electrical Co. - CTEK Products Brochure 2013 Local interface with charger status and a large charge voltage and current display Value display for charge time [h] and energy [Ah] Model number Volt Volt Charging voltage Current, mains Back current drain Output current Ripple Ambient temperature Charger type Battery types Battery capacity Dimensions Insulation class Weight

1045 12V 24V Max 15,8V/31,6V 6.3–4.4A rms (at full charging current) <1Ah/month Max 70A/35A (max 30 sec.) Max continuous 50A/25A <4% -20 – +50 °C (-4 – +122 °F) 8 step, fully automatic charging cycle with adjustable parameters All types of 12V/24V lead-acid batteries (WET, MF, Ca/Ca, AGM and GEL) 40-1500Ah - 12V, 20-750Ah - 24V 332 x 178 x 80mm (L x W x H) IP20 3.6kg (without charger cable)

Product ID: MXC0.8

MXC 0.8 The XC 0.8 is the charger that can give your vintage car a new lease of life. The XC 0.8 is a compact fully automatic 4-step charger that charges and maintains 6V batteries from 1.2–100Ah. The XC 0.8 is IP 65 31

Lim Battery & Electrical Co. - CTEK Products Brochure 2013 classified (splash and dust proof) and delivers 0.8A. It is designed to protect vehicle electronics and is non-sparking, reverse polarity protected and short-circuit proof. It is delivered with a 5-year warranty. Auto: Fully automatic for optimal charging 6V: For all lead-acid batteries Fully Charged Battery / Maintenance Charging Model number Volt Rated Voltage AC Charging voltage Min battery voltage Charging current Current, mains Back current drain Ripple Ambient temperature Charger type Battery capacity Dimensions Insulation class Weight

1054 6V 220–240VAC, 50–60Hz 7.2V 2.0V 0,8A max 0.2A rms (at full charging current) <1Ah/month <4% -20°C to +50°C, output power is reduced automatically at high temperatures 4-step, fully automatic charging cycle 1.2–100Ah 142 x 51 x 36mm (L x W x H) IP65 0.3kg

Lim Battery & Electrical Co. - CTEK Products Brochure 2013

Marine Series

Lim Battery & Electrical Co. - CTEK Products Brochure 2013 Product ID: M45

M 45 Even small boats with 12V-batteries (7-75Ah and up to 120 Ah for maintenance charging) require a charger designed to withstand the demanding marine environment. M45 is a high quality 4-step charger with unique functions such as desulphating and safe maintenance charging between seasons. Featuring different charging programs: one program for small batteries (approx. 7-30Ah) supplying 0.8A, one program for normal size batteries (approx. 40-75Ah) and one program for AGM-batteries, which require slightly higher charging voltage of 14.7V instead of the usual 14.4V, supply 3.6A IP65 classification means that M45 is splash and dustproof. It does not generate any harmful galvanic currents, is fully compatible with the boat’s electronics and has been developed to offer safe charging: non-sparking, reverse polarity protection and short circuit proof. M45 comes with a five year guarantee. Auto: Fully automatic for optimal charging Natural convection 12V: For all lead-acid batteries Cooling Volt Rated Voltage AC

Natural convection 12V 220–240VAC, 50–60Hz

Lim Battery & Electrical Co. - CTEK Products Brochure 2013 Charging voltage Min battery voltage Charging current Current, mains Back current drain Ripple Ambient temperature Charger type Battery types Battery capacity Dimensions Insulation class Weight

SMALL, NORMAL: 14.4V, COLD/AGM: 14.7V 2.0V 3,6A max 0.65A rms (at full charging current) <1Ah/month <4% -20°C to +50°C, output power is reduced automatically at high temperatures 4-step, fully automatic charging cycle All types of 12V lead-acid batteries (WET, MF, Ca/Ca, AGM and GEL) 7–75Ah up to 120Ah for maintenance 165 x 61 x 38mm (L x W x H) IP65 0.5kg

Product ID: M100

M 100 An excellent marine charger offering great value for money that provides complete battery care for small boats with a 12V-battery, and which can serve as a start and service battery. M100 is a fully automatic 8-step charger that supplies 7A and is ideal for batteries between 14-150Ah and up to 225 Ah for maintenance charging. M100 analyses whether the battery can accept and retain the charge, it removes harmful lead sulphate crystals, gives an effective charge and automatically switches to safe maintenance charging when the battery is fully charged.

Lim Battery & Electrical Co. - CTEK Products Brochure 2013 The practical Recond mode reconditions the battery following deep discharging, which can occur after a long day at sea. AGM mode provides optimum charging of AGM batteries that require a slightly higher charging voltage. There is a Supply mode which acts as a power source if you need to disconnect a battery and do not want to lose important electronic settings. IP65 classification means that M100 is splash and dustproof. It does not generate any harmful galvanic currents, is fully compatible with the boat’s electronics and has been developed to offer safe charging: non-sparking, reverse polarity protection and short circuit proof. M100 comes with a five year guarantee. Auto: Fully automatic for optimal charging Natural convection 12V: For all lead-acid batteries Fully Charged Battery / Maintenance Charging COLD/AGM: Charging in cold conditions and AGM batteries Cooling Volt Rated Voltage AC Charging voltage Min battery voltage Charging current Current, mains Back current drain Ripple Ambient temperature Charger type Battery types Battery capacity Dimensions Insulation class Weight

Natural convection 12V 220–240VAC, 50–60Hz NORMAL: 14.4V, COLD/AGM: 14.7V, RECOND: 15.8V, SUPPLY: 13.6V 2.0V 7A max 1.2A rms (at full charging current) <1Ah/month <4% -20°C to +50°C, output power is reduced automatically at high temperatures 8 step, fully automatic charging cycle All types of 12V lead-acid batteries (WET, MF, Ca/Ca, AGM and GEL) 14–150Ah up to 225Ah for maintenance 191 x 89 x 48mm (L x W x H) IP65 0.8kg

Lim Battery & Electrical Co. - CTEK Products Brochure 2013 Product ID: M200

M200 M200 is the perfect solution for those who need to charge large 12V-batteries. The charger has a four metre long secondary cable and a temperature sensor for optimised charging irrespective of temperature, which gives extra flexibility in permanent installations. M200 is a fully automatic 8-step charger that supplies 15A and is ideal for batteries between 28-300Ah and up to 500Ah for maintenance charging. M200 analyses whether the battery can accept and retain the charge, it removes harmful lead sulphate crystals, gives an effective charge and automatically switches to safe maintenance charging when the battery is fully charged. The practical Recond mode reconditions the battery following deep discharging, which can occur after a long day at sea. If you intend to stay overnight onboard you can switch to Night mode for silent charging. IP44 classification means M200 is approved for outdoor use. It does not generate any harmful galvanic currents, is fully protected from producing voltages that can damage the vehicleâ&#x20AC;&#x2122;s electronics and has been developed to offer safe charging: non-sparking, reverse polarity protection and short circuit proof. M200 comes with a five year guarantee.

Lim Battery & Electrical Co. - CTEK Products Brochure 2013 Eyelet M10 (10,4 mm) Temp sensor on cable. Fan Auto: Fully automatic for optimal charging 12V: For all lead-acid batteries Fully Charged Battery / Maintenance Charging Temperature sensor Cooling Volt Rated Voltage AC Charging voltage Min battery voltage Charging current Current, mains Back current drain Ripple Ambient temperature Charger type Battery types Battery capacity Dimensions Insulation class Weight

Fan 12V 220–240VAC, 50–60Hz 14.4V 2.0V 15A max 2.9A rms (at full charging current) <1Ah/month <4% -20°C to +50°C, output power is reduced automatically at high temperatures 8 step, fully automatic charging cycle All types of 12V lead-acid batteries (WET, MF, Ca/Ca, AGM and GEL) 28–300Ah up to 500Ah for maintenance 235 x 130 x 65mm (L x W x H) IP44 1.9kg

Lim Battery & Electrical Co. - CTEK Products Brochure 2013 Product ID: M300

M300 Incl. STARTER M300 is CTEKs powerful charger for boat owners with larger need of quick and effective charging. M300 is temperature compensated, it reconditions a stratified battery with the special RECOND mode, and this is needed after several deep discharges which is common in the marine environment. The larger CTEKâ&#x20AC;&#x2122;s Marine chargers have 4 meter cables and eye-leads for easy installation in the boat. M300 has 5 year warranty, delivers 25A and has IP44-classification. All CTEK chargers are spark free, short circuit proof and will not harm the electronic equipment. Eyelet M10 (10,4 mm) Temp sensor on cable. An M300 STARTER is also included, that will prolong the lifetime of your start battery. Fan Auto: Fully automatic for optimal charging 12V: For all lead-acid batteries Fully Charged Battery / Maintenance Charging Temperature sensor 39

Lim Battery & Electrical Co. - CTEK Products Brochure 2013 Cooling Volt Rated Voltage AC Charging voltage Min battery voltage Charging current Current, mains Back current drain Ripple Ambient temperature Charger type Battery types Battery capacity Dimensions Insulation class Weight

Fan 12V 220–240VAC, 50–60Hz 14.4V 2.0V 25A max 2.9A rms (at full charging current) <1Ah/month <4% -20°C to +50°C, output power is reduced automatically at high temperatures 8 step, fully automatic charging cycle All types of 12V lead-acid batteries (WET, MF, Ca/Ca, AGM and GEL) 40–500Ah up to 500Ah for maintenance 235 x 130 x 65mm (L x W x H) IP44 2.2kg

Lim Battery & Electrical Co. - CTEK Products Brochure 2013

CTEK速 The Smartest Battery Chargers in the World

Visit Us: http://limbat.com.sg

Contact Us: Singapore: Lim Battery & Electrical Company. Blk.3018, Bedok North Street 5, Unit 02-23 - Workshop, Unit 03-22 - Showroom Singapore 486132. Tel: (65) 6-338-1138, 6-242-1138, 6-242-2822 Fax : (65) 6-242-2282 Email: sunking@limbat.com.sg Johore Bahru: OEM Electrical S.B. #7, Jalan Besi 1, Taman Sri Putri, 81300 Skudai, Johore, West Malaysia. TEL & FAX : 60-75578311 Email : skudaioem@hotmail.com