Masonry Magazine November 2014 by Lionheart Publishing Inc.

November 2014

T h e Vo i c e o f t h e M a s o n r y I n d u s t r y

Volume 53, Number 11

Handheld Tools Natural Stone Green Building

MCAA Midyear Meeting

INTRODUCING

PAVER ARMOR PRO From the makers of DuPont StoneTech® Professional comes an advanced line of hardscapes products built with pros in mind. Paver Armor Pro™ products provide superior performance and make it simple to choose the right product for your job with 3 easy categories: Color Enriching Sealers, Natural Look Sealers, and Cleaners.

™

PaverArmorPro.com 1.877.786.6383

* 1 , ( 5 1 1/, 25'( 2 1(: 1&+25

0$'( ,1 7+( 86$ 0 0$ $'( '( ,1 ,1 7+ 7+ +( ( 86 86$ 6$

.UDQGR 0HWDO 3URGXFWV ,QF

7+( 6775$30$67(5Â&#x160; 6 :1 $ 1&+256 21 6,7( 0$.( <285 2

7KH 6WUDSPDVWHU 7

WRRO WKD %HLQJ Y XVH WKL Â&#x2021; Â&#x2021; Â&#x2021; Â&#x2021;

67 $1 $ 0

&876 %(1'6 381&+(6 (6

::: .5$1'2 &20

www.masonrymagazine.com

on the

cover

November 2014 | Vol. 53, No. 11

Shown on the cover is the Milwaukee City Hall in Milwaukee, Wis. The structure was built in 1885 and uses a Romanesque Revival Architectural Design. Lower floors were built using Berea Sandstone, while the upper ones made use of pressed brick. Local firm G. Campbell and Sons produced the bell for the Milwaukee City Hall. In 1894, its cornerstone was laid, and the building was further dedicated in December 1895. In 2006, a $70 million renovation began on the building.

features 14

The 2014 MCAA Midyear Meeting was heavily attended by a group eager to learn, network and enjoy Milwaukee.

columns & departments

MCAA Midyear Meeting

Natural Stone

From The Editor

Chairman’s Message

A beautiful Arizona residence showcases the natural bond of mortar, natural stone and the mason.

Government Affairs

Nebraska State Capitol:

New Products

With recent restoration projects at the Nebraska State Capitol, preservation staff tested masonry cleaning techniques.

MCAA TEAM Awards

Association News

Masonry reviews several handheld tools for the mason contractor.

Full Contact PM

Classified Advertising

Green Building

News

LEED v4 presents a significant shift in program approaches, with changes designed to push designers and builders into new realms of sustainability innovation.

MCAA Upcoming Education

Handheld Tools

MCAA Strategic Partner Program

MASONRY (ISSN 0025-4681) is published monthly. Subscription rate $29 per year; Canada and Mexico $47 (U.S. currency); all other countries $65. Single copies $8.50. Copyright 2014 by Mason Contractors Association of America. POSTMASTER: Send address changes to MASONRY, c/o Lionheart Publishing, Inc., 506 Roswell St., Ste. 220, Marietta, GA 30060. Canadian return address: Station A, PO Box 54 Windsor, Ontario N9A 615. SEND SUBSCRIPTIONS and business correspondence to: MASONRY, c/o Lionheart Publishing, Inc., 506 Roswell St., Ste. 220, Marietta, GA 30060 Phone: 770-431-0867 or 888-303-5639 www.masonrymagazine.com. Layout & Design © Lionheart Publishing, Inc.

MASONRY

November 2014 • www.masoncontractors.org

The Voice of the Masonry Industry

FROM THE E D I T O R T h e Vo i c e o f t h e M a s o n r y I n d u s t r y

MASONRY Magazine Jennifer Morrell Editor jmorrell@lionhrtpub.com

Masonry: LEEDing the Way The Masonry team just returned from a vibrant and well-attended Greenbuild International Conference and Expo, this year held in New Orleans. It has taken some time, but I believe most industries are, at last, embracing sustainability and energy efficiency. Lucky for our industry, masonry is a naturally green material with an extremely long life cycle. You can read more about the U.S. Green Building Council’s LEED v4, which includes changes designed to push designers and builders into new realms of sustainability innovation (see “LEED: A Focus on Product Transparency,” p. 38). This issue also includes complete coverage of the 2014 MCAA Midyear Meeting, held in September in Milwaukee (see p. 14), as well as images and profiles of the 13 MCAA Tribute to Exemplary Achievements in Masonry (TEAM) Award winners (see p. 44). It only makes sense to shine a light on natural stone as we cover green building, so this issue offers an opulent spotlight on an Arizona residence built with masonry (p. 18). As we talk about the flexibility and unique character that natural stone provides, the sometimes-tough task of cleaning that material is addressed as well (see “Cleaning the Nebraska State Capitol,” p. 24). Of interest in this issue is a product review on a few of the latest and greatest handheld tools for masons on the jobsite. See what the industry has to offer in “Hands Down the Best Handhelds,” p. 32. We hope you enjoy this particularly diverse and informative issue of Masonry. ❙MAS

Official Publication of the Mason Contractors Association of America and the Canadian Masonry Contractors Association The Mason Contractors Association of America is committed to preserving and promoting the masonry industry by providing continuing education, advocating fair codes and standards, fostering a safe work environment, recruiting future manpower, and marketing the benefits of masonry materials.ion of America is committed to preserving and promoting the masonry industry by providing continuing education, advocating fair codes and standards, fostering a safe work environment, recruiting future manpower, and marketing the benefits of masonry materials. MASON CONTRACTORS ASSOCIATION OF AMERICA Chairman Mark Kemp Vice Chairman Mike Sutter Treasurer Paul Odom Secretary Paul Oldham Regional Vice Presidents Robert V. Barnes, Jr. Ron Bennett Steve Borman Edwin Davenport

Glenn Hotmann Gary Joyner Michael Schmerbeck Rick Swanson Larry Vacala

President/CEO

Jeff Buczkiewicz

EXECUTIVE STAFF Government Affairs Representatives Director of Marketing, Education, and Information Technology Director of Training and Workforce Development Administrative Assistant Consultant

The Keelen Group Timothy W. O’Toole Terry Ruppel Ann Trownsell Rashod Johnson

EDITORIAL ADVISORY BOARD David Jollay (Jollay Masonry Contractors), John Chrysler (MIA), John Melander (PCA), David Hill (Pettit Construction Co.), John J. Smith (John J. Smith Masonry Co.), Brian Grant (Grant/Jack’s Masonry), Jerry Painter (Painter Masonry, Inc.), Doug Nichols (Doug Nichols Enterprises), G. Alan Griffin (Griffin Contracting, Inc.), Tom Daniel (GBC Concrete and Masonry Construction, Inc.) Executive Office 1481 Merchant Drive Algonquin, IL 60102 Phone: 224.678.9709 or 800.536.2225 Fax: 224.678.9714

MASONRY is the official publication of the Mason Contractors Association of America (MCAA) and the Canadian Masonry Contractors Association (CMCA). The magazine acts as a sounding board without approving, disapproving or guaranteeing the validity or accuracy of any data, claim or opinion appearing under a byline or obtained or quoted from an acknowledged source. Opinions expressed by officers do not necessarily reflect the official views of MCAA or CMCA. The appearance of advertising or new product information doesn't constitute an endorsement by MCAA or CMCA of product featured. MASONRY ADVERTISING AND EDITORIAL OFFICE

Send all advertising and editorial submissions for Masonry to: Lionheart Publishing, Inc. 506 Roswell Street, Suite 220, Marietta, GA 30060 USA Tel: 770.431.0867 • Fax: 770.432.6969 • E-mail: lpi@lionhrtpub.com www.masonrymagazine.com Publisher Editor Assistant Editor Art Director Assistant Art Director Online Projects Manager Advertising Sales

John Llewellyn • llewellyn@lionhrtpub.com Jennifer Morrell • jmorrell@lionhrtpub.com Marty M. Hohmann • marty@redclayeditorial.com Alan Brubaker • albrubaker@lionhrtpub.com Jim McDonald • jim@lionhrtpub.com Patton McGinley • patton@lionhrtpub.com Marvin Diamond • marvin@lionhrtpub.com Art Shaeffer • art@lionhrtpub.com

Marketing Director and Audience Development Maria Bennett • bennett@lionhrtpub.com Reprints Kelly Millwood • kelly@lionhrtpub.com

MASONRY

November 2014 • www.masoncontractors.org

The Voice of the Masonry Industry

CHAIRMAN’S M E S S A G E Mark Kemp Chairman Mason Contractors Association of America Mark@superiormasonry.com

Coming Together for our Industry Wow! It was nice to see so many of you at the Midyear Meeting in Milwaukee. My wife and I thank you for coming and, if you get up this way again, don’t be afraid to drop in. We had some great meetings, starting with the TEAM Awards Dinner held at the HarleyDavidson Museum. There were some great masonry projects, and I am sure the judges had a tough time selecting winners. Before and after the meeting, it was nice to be able to socialize with so many members. Plus we all had time to have a picture taken on some really nice Harleys. The committee meetings went very well, with lots of great input from just about everyone there. This is why the Midyear Meeting is so important – to get the input from members about how their association can best serve them. The goals and direction of each committee have been redefined for the next year. A special “thank you” goes out to all the committee chairs, cochairs and active committee members. Something new for the Certification Committee is the starting of a Certificate Program on key masonry educational topics. You will be able to get certificates on a variety of topics. Look for more to come on this. MCAA also will be putting together a program for certification on the proper way to build Storm Shelters, which will be required in school construction starting in 2015. Pauline and I truly enjoyed having attendees at our home for the Open House Reception. What made it special was how everyone helped out without being asked. The catering people showed 8

MASONRY

up at the same time as the first bus load of attendees. But everyone pitched in to help. I have said it before, but this is what MCAA is all about, everyone helping everybody. On the third day, we had our board meeting ratifying some minor changes to The Masonry Foundation, and then went right into the Roundtable Discussions. The discussions are a great opportunity to find out how other contractors handle different situations. Later, we had our closing dinner. The first stop was Barnacle Buds on the river, followed by dinner at The Horney Goat. Congressman Reid Ribble was there to greet us and told us all to contact our representatives about moving the Check-Off Bill forward. Rep. Ribble is a true friend to our Industry. The next morning, our Shown are Mark and Pauline Kemp at the Harley-Davidson Museum. first-ever Speed Dating event took place. This event connected con- committee that will be asking contractors to make a pledge as well. tractors to vendors, so they could tell us I am excited about our first Regional what is new with their products and how we could save money. All walked away Masonrypalooza to be held November 14th and 15th in Phoenix, Arizona. with something positive. We are already being asked to do it again at the next There will be lots of education classes and also serves as a great way for us to Midyear, which will be in Key West, Fla. The Midyear Meeting gave The reach out personally to our members. We have several other regional events Masonry Foundation a nice push, and we are excited about the support con- planned for this year and will keep you tractors have provided to the founda- updated. In closing I leave you with this tion. We will be opening up the pledge opportunities to everyone thought, let no one come to you without soon. We have developed a regional leaving better and happier. ❙MAS

November 2014 • www.masoncontractors.org

The Voice of the Masonry Industry

GOVERNMENT A F F A I R S

Rep. Doug Lamborn (R-CO)

The High Cost of an Anti-Energy President We live in extraordinary times. The amazing technological innovations of America’s scientists, researchers, engineers and leading minds have made available to us the technology to free America from dependence on volatile and foreign sources of energy. Yet, everywhere you turn, energy costs are up on everything from home energy bills to prices at the pump. How

COMING IN DECEMBER 2014 Be sure to catch the December 2014 issue of Masonry, which will feature articles covering current trends and examining industry issues, including:

CONNECTORS, ANCHORS AND FASTENERS The importance of wellfunctioning connectors, anchors and fasteners cannot be overstated. Learn more as Masonry reports.

SCAFFOLDING Masonry will examine the latest in the area of scaffolding, as well as any improvements and enhancements made to existing products, methods and safety standards.

BUILDING ENVELOPES & WRAPS With energy efficiency and sustainability as the ultimate goals, the role of building envelopes and wraps are of the utmost importance. Learn more in December! For advertising information, contact

Marvin Diamond 770.431.0867, ext. 208 Toll-free: 888.303.5639 E-mail: marvin@lionhrtpub.com

MASONRY

does this happen when we are producing the most American energy we have for decades? The simple truth is that the Obama Administration is blocking energy production on federal lands. It is true that oil production is up by 61 percent on privately controlled lands, but actually has decreased by 6 percent on federal lands. Natural gas production is down 28 percent on federal lands. It should be remembered that federal lands are owned by the taxpayers, not privately held by regulatory-minded bureaucrats in the Obama Administration. Even in the face of gas prices doubling since the start of his administration, President Obama is using the EPA to impose new regulations that would serve as a kind of nationwide tax on energy. It is simply unconscionable for the President to arbitrarily implement higher energy costs when the economy still is struggling to recover. I find it hard to believe that the President and his team do not understand the negative impacts higher energy costs have on the average American consumer. Virtually every single item you purchase or piece of food you eat had to be produced and then transported to your location. When these front-end costs increase, they are passed on to Americans in the form of higher prices. With huge numbers of Americans out of work or underemployed, they are not able to purchase as many goods and services as usual. This produces a negative impact on

November 2014 • www.masoncontractors.org

the economic health of the nation. Indeed, few cases illustrate the connection between energy and jobs as well as the Keystone Pipeline. For years, the Obama Administration, and his Democratic allies in the United States Senate, have dithered and delayed on the implementation of a rigorously researched project that would lead to tens of thousands of American jobs and pump almost 1 million barrels of oil a day to American refineries. The reasons for their refusal range from the ill-informed to outright malicious. When study after study shows that the Keystone Pipeline will have no significant environmental impact, you are forced to conclude that President Obama cares more about the theoretical concerns of his wealthy environmentalist donors, than the real-world concerns of Americans who are struggling to pay their bills and find work. Soon, the U.S. House, the People’s House, will be passing comprehensive energy legislation designed to expand on-shore and off-shore energy permitting and open up the Keystone Pipeline. No longer should Democrats in the Senate hide behind procedural games and stall tactics. Before going to the polls in November, the American people deserve to know where they stand on these important, pocketbook energy issues. Do Senate Democrats stand with the pro-energy, hard-working citizens of America, or do they stand with the antienergy, barely working President of the United States? ❙MAS The Voice of the Masonry Industry

Scaffold Plank Dense Industrial (DI-65) by Including Rod, Clip, Stamp

$12.99 10’s - $16.50 12’s - $19.50 16’s - $23.99 8’s -

On Sale This Month

$17.00

Walkthru Sets -

5x5 Sets -

As low as

$101.90

$85.00 Heavy Duty Saddle Bracket -

$11.59

Guard Rail Stanchion -

$26.99

$6.50 7’ Safety Rail - $4.26 Veneer/Pedestal/Judy Jack - $39.69 Female Safety Pole -

866-900-0983

NEW P R O D U C T S

TO SUBMIT A NEW PRODUCT: Contact Jennifer Morrell • Email: jmorrell@lionhrtpub.com

BOSCH

WILLOW CREEK PAVING STONES

Mt. Prospect, Ill.

Oakdale, Minn.

Heated Jacket – Women’s Collection The new Bosch PSJ120 Women’s Heated Jacket is the first extension of the Bosch heated jacket collection. The women’s heated jacket offers tailored-fit features and is powered by a Bosch 12V Max lithium-ion battery connected to the BHB120 battery holster. It not only powers the jacket, but also keeps USBcompatible cell phones and other important electronics charged and ready to go. The jacket features three quick warming core heat zones that provide up to six hours of heated runtime on low heat level with a 2.0 Ah 12V Max battery.

New Color Added to Slatestone Paver Line Willow Creek Paving Stones has introduced a new color, Mocha, to its family of Slatestone paving stones. Willow Creek’s Slatestone interlocking concrete pavers feature a natural slate texture. Slatestone pavers also are available in Bleu, Creme and Patina. Slatestone pavers are engineered seven cm thick to meet the highest performance standards and aesthetic demands of contractors and landscape architects. Slatestone pavers come in three shapes to create an easy-to-install repeating pattern for a random, natural appearance.

www.boschtools.com

www.willowcreekpavingstones.com

CALSTAR PRODUCTS

SENECA TILES INC.

Caledonia, Wis.

Attica, Ohio

Six New Shapes for Sustainable Brick Line

Glazed Brick and Glazed Thin Brick

CalStar Products is expanding its brick offerings with six new sizes. The units incorporate 37 percent recycled content and eliminate the need for kiln-firing. The new sizes comprise the Ambassador brick: 2 1/4” high x 15 5/8” long – available smooth or as a split-face unit; the Roman brick: 3 5/8” x 1 5/8” x 11 5/8”; the Norman brick: 3 5/8” x 2 1/4” x 11 5/8”; the King brick: 2 3/4” x 2 5/8” x 9 5/8”; and the 8x16 and 4x16 facing units: available smooth or as a split-face unit.

Seneca Tiles Inc. announced a new division designed to serve the masonry industry: GlazedBrick. The GlazedBrick division offers a glazed color surface on any brick manufacturer’s fired body, in sizes ranging from modular to utilities or larger, and either molded or extruded. A brick manufacturer’s thin brick can be glazed as well. Architects and consumers now can customize any project with a colorful glazed brick for either accents or solid walls. When you have a masonry project that calls for that special artistic touch of color, contact us.

www.calstarproducts.com

www.senecatiles.com

COSELLA-DORKEN PRODUCTS INC.

Product & Service Information

Beamsville, Ontario, Canada

888-303-5639, EXT. 230

WWW.MASONRYMAGAZINE.COM We’ve made it fast, easy and convenient to request FREE information about any product or service in this issue.

Industry Guides Created With Industry Leaders

To request information online, go to: www.masonrymagazine.com. Click on ‘FREE Product Information’ (right top corner) then…

The “Technical Guide” and “Installation Guide” for DELTAVENT SA are the latest reference guide publications by CosellaDörken to assist building professionals with understanding and specifying air barrier systems. The guides contain the latest information on continuity, insulation and water management by climate zone. The Technical Guide is designed to be an educational and usable document, not a mere sales brochure. The Installation Guide is designed to be a practical handbook for anyone who wants properly detailed construction elements.

www.cosella-dorken.com

MASONRY

1. 2. 3. 4.

Select the issue of the magazine you are reading Check the box next to the advertiser you are interested in Provide your name, address and business information Click submit.

Not close to your computer? Request information by phone. Dial tollfree 888-303-5639, Ext. 230. Follow the voice guidelines to request FREE information. In a hurry and need the information now? We have provided the advertisers’ Websites and phone numbers in the ‘Ad Index’ toward the back of this issue. You can call direct for information on the products and services advertised in this issue. Don't forget to tell them you saw their ad in MASONRY Magazine.

www.masonrymagazine.com

November 2014 • www.masoncontractors.org

The Voice of the Masonry Industry

Introducing

EZ E EZG ZG G Man Manufacturingâ&#x20AC;&#x2122;s Ma an nufa nufact uf facturing fac tur tu riin i gâ&#x20AC;&#x2122; ing gâ&#x20AC;&#x2122;s s %: :' : ' s %: :' '

also EZ12 able il ava

Â&#x2021; 6ROLG 6WHHO 6KDIW Â&#x2021; Âľ 5RXQG 5RG *UDWLQJ Â&#x2021; Âľ 3O\ 7LUHV Â&#x2021; Âľ $[OH

EZ as 1...2...3

XDUH %DU

3URGXFW 6SHFLĂ&#x20AC;FDWLRQV 0RGHO &DSDFLW\ IW /

&DSDFLW\ %DJV 3RZHU 6RXUFH (QJLQH 6WDUWLQJ 'UXP 7KLFNQHVV )RUNOLIW 3RFNHWV 'LVFKDUJH +HLJKW /RDG +HLJKW 'XPS $FWLRQ 'ULYH 6\VWHP 'LPHQVLRQV

:HLJKW

(=* 7.0 1 1/2 to 2 Honda GX240 7.9HP(5.6kw) Manual Recoil 3/16â&#x20AC;? Standard 21â&#x20AC;? 48â&#x20AC;? Manual Chain 73â&#x20AC;? L x 47â&#x20AC;? W x 58â&#x20AC;? H 107â&#x20AC;? L w/tongue 67â&#x20AC;? H w/dump handle 820lbs (371.9kg)

1. Shovel (=* 9.0 2 to 3 Honda GX240 7.9HP(5.6kw) Manual Recoil 3/16â&#x20AC;? Standard 22â&#x20AC;? 53â&#x20AC;? Manual Chain 71â&#x20AC;? L x 47â&#x20AC;? W x 62â&#x20AC;? H 104â&#x20AC;? L w/tongue 73â&#x20AC;? H w/dump handle 895lbs (406.0kg)

2. Load

3. Dump

MCAA Midyear Meeting

Networking, Education and Honors at the MCAA Midyear Meeting in Milwaukee

HE MCAA MIDYEAR MEETING HAD FANTASTIC ATTENDANCE in MCAA Chairman Mark Kemp’s beautiful hometown of Milwaukee. The meeting kicked off with the TEAM Awards Dinner, held at the Harley-Davidson Museum. The purpose of the Tribute to Exemplary Achievements in Masonry (TEAM) Awards is to recognize projects and members of the construction team for outstanding accomplishments in masonry design and construction. All mason contractors or architects were eligible to submit a project. Masonry had to be the dominant material used in the project. Any work completed and landscaped between Jan.1, 2010 and Dec. 31, 2013 was eligible to be entered.

Projects could only be entered into one category. Those included Commercial, Education: K-8, Education: 9-12, Education: College/University, Government, Industrial, Institutional, Landscape/Hardscape, Rehabilitation/Restoration, Residential: Single Family, Residential: Multi-Family, Block, Lightweight Block, and LEED. The awards were presented to the mason contractor, general contractor, architect, masonry supplier, and building owner. All projects are judged on the following criteria: Design, Craftsmanship, Percent of Visible Masonry, Overall Aesthetic Appeal, and Masonry Difficulty. A jury panel consisted of mason contractors selected from across the country who are not competing in the competition. The judges were selected by the MCAA TEAM Awards Committee. You can read all about the TEAM Awards on Shown are all of the MCAA 2014 TEAM Award winners. pp. 44-47 of this issue. On the second day of the meeting, after a group breakfast, MCAA Committee Meetings were kicked members. An update was given on The Masonry off. Each committee provided a report updating participants Foundation as well. on committee statuses on various initiatives and projects. Following the breakfast were Networking Roundtable A Chairman’s Reception was hosted by MCAA Discussions. Issues of relevance were discussed as they perChairman Mark Kemp and his wife, Pauline. Later that tained to different positions held within the masonry evening, the MCAA South of 40 group attended a industry. Best practices and ideas were shared and Milwaukee Brewers baseball game. exchanged, which provided plenty of valuable insight. A The third day of the meeting began with a breakfast and dinner held at The Horny Goat featured a special guest, MCAA board meeting, which also was attended by MCAA Rep. Reid Ribble (R-WI). continued on p.16

MASONRY

November 2014 • www.masoncontractors.org

The Voice of the Masonry Industry

Award Night

Midyear Meeting attendees enjoyed networking before the TEAM Awards dinner began.

Congressman Reid Ribble addresses Midyear attendees during a dinner held at The Horny Goat.

Networking Roundtables offered an opportunity for Midyear Meeting attendees to share ideas and best practices.

Stone Cold Masonry received an MCAA Safety Award in the Greater Than 100,000 Hours category, taking first place.

Midyear attendees are shown at the MCAA Committee Meetings.

Jeff Speck with Big River Industries accepted a TEAM Award for the Lightweight Block category.

Gary Joyner of Joyner Masonry accepted the Education: College/University TEAM Award from MCAA Chairman Mark Kemp. www.masonrymagazine.com

The team from Doyle Hatfield accepted the Education: 912 TEAM Award.

Mackie Bounds with Brazos Masonry accepted the TEAM Award for the Industrial category.

Buddie Barnes of Dee Brown Inc. accepts the Residential: Multi Family TEAM Award.

November 2014

M A S O NRY

MCAA Midyear Meeting continued from p.14

Five 2014 MCAA Safety Advantage Award winners were recognized during the Midyear Meeting. The MCAA Safety Advantage Awards are presented based on a mason contractor’s incident rate. Awards were presented to the top companies with greater than 100,000 hours worked by all employees, and the top companies with less than 100,000 hours worked by all employees. In the Greater Than 100,000 Hours category, the first place winner was Stone Cold Masonry, and the second place winner was Otto Baum Co. Inc. In the Less Than 100,000 Hours category, Minahan Construction Inc. won first place, with second place going to Spencer Brickwork Inc. and third place going to Superior Masonry Builders Inc. On the last day of the meeting, the MCAA held the firstever “Speed Dating” event. MCAA Speed Dating is a rapid series of 25-minute business-to-business meetings between mason contractors and manufacturer/suppliers to openly discuss business needs as well as the latest product and equipment innovations advancing the masonry industry. Contractors met with nine companies in an intimate setting, where they presented their latest products and services. Once a meeting was over, participants moved on to the next appointment to learn how that company will improve your organization’s business and increase profitability. Participating companies included Beeline, Big River Industries Inc., cfiFOAM Inc., Concrete Products Group, EZ Grout Corp., Non-Stop Scaffolding, SPEC MIX Inc., Tradesmen's Software Inc., and Xtreme Manufacturing. ❙MAS

Dick Dentinger of B&D Associates Inc. won the top prize – cash – in the Speed Dating giveaway.

MCAA Treasurer Paul Oldham plays bartender during the Chairman’s Reception, hosted by Mark and Pauline Kemp.

The MCAA South of 40 group attended a Milwaukee Brewers baseball game.

MASONRY

Totally Milwaukee: a brat with sauerkraut on a pretzel roll. Yum!

November 2014 • www.masoncontractors.org

The Voice of the Masonry Industry

The Complete Solution for Facades Masonr Masonryy V Veneer eneer Installation System (MVIS) or aadhered dhered m anufactured sstone tone LATICRETE hhas LATICRETE manufactured as a ccomplete omplete ssolution olution ffor m asonry vveneers, masonry eneers, pproviding roviding a permanent, permanent, hhigh igh strength strength iinstallation nstallation protects water tthat hat iiss ffreeze reeze thaw thaw stable stable aand nd pr otects ffrom rom w ater iintrusion ntrusion – ® backed backed bbyy a LLATICRETE ATICRETE 25 25 Year Year SSystem ystem W Warranty*. arranty*.

w www.laticrete.com/mvis ww.laticrete.com/mvis | 1.800.243.4788 1.800.243.4788 A-5635-1014 *See Data Sheet 025.0 for complete war warranty ranty information. information. ©2014 ©2014 LA LATICRETE ATICRETE Inter International, Inc. All trademarks shown are the intellectual properties ties of their respective owners.

Natural Bond:

Mortar, Natural Stone and the Mason THE SONORAN DESERT IS CONSIDERED ONE OF THE HOTTEST DESERTS IN NORTH AMERICA, but tucked into the rolling hills and dramatic scenery of north Scottsdale, Ariz., sits one of the coolest natural stone residences imaginable. Nestled into one of the many hillsides near the Desert Mountain golf community is a secluded, 12,000-square-foot private residence. It was designed to include a variety of indigenous, natural schist and granite stones to artfully combine the qualities of the surrounding desert.

MASONRY

November 2014 â&#x20AC;˘ www.masoncontractors.org

The Voice of the Masonry Industry

The residence was designed by project architect Craig Brown of Craig E. Brown & Associates, Fountain Hills, Ariz. The masonry work, both vertical and horizontal, was installed by Sutter Masonry Inc., El Mirage, Ariz. The home is positioned at 3,500 feet above sea level to take full advantage of unlimited panoramic views of the neighboring mountains that serve as the backdrop for spectacular sunrises and sunsets. According to Brown, who worked closely with the owners, both of whom are general contractors, the site already contains its design. “The creative task of the artists, designers and architects was to make the invisible visible,” said Brown. “Using natural stone as the major exterior and interior material for walls, fireplaces, floor and patio decks, in combination with wood, stucco and copper, was the only choice to bring the manmade into this beautiful natural setting.” Utilizing the mountain’s solid granite and natural granite boulder outcroppings to compliment the home’s theme, it features curving walls that were designed to maximize the scenic views of the area. “Natural schist stone was quarried in Mayer, Ariz., into six-inch-thick veneer, blending together various natural colors,” said Brown. “It was dry stacked and laid horizontally for the walls and fireplaces, and then switched to vertical on the walls in the main dining room. Natural stone is also laid in random patterns for the floors, patio decks and stairways.

www.masonrymagazine.com

November 2014

M A S O NRY

Ask The Expert

N AT U R A L S TO N E

Q&A With Jim Lucas

Thousands of schist stones were custom cut and fitted to adhere to the inside and outside of the structure. One of the highlights of the home is its exterior and interior theme, where schist stones were laid in such a manner that they almost look staggered to create a rugged, imperfect look. Thousands upon thousands of schist stones were custom cut and fitted to adhere to the inside and outside of the structure, utilizing 450 3,000-pound bulk bags – or 1.3 million pounds – of SPEC MIX’s Colored Building Stone Mortar. “This residence is one of my favorite natural stone projects we’ve been privileged to build,” said Mike Sutter, CEO of Sutter Masonry Inc. “Aside from the overall size of the project, the two most challenging aspects of the installation were the amount of stone used – both inside and outside – and applying the mortar and stone on the curved walls, arches and slopes.” Sutter went on to describe his masons’ technique: “They used a full depth mortar bed of colored SPEC MIX Building Stone Mortar to set the stone, resulting in a thin bed joint between the units, which perfectly matched the specified color and the stone.” Sutter’s brother and project superintendent, Jack, has worked on numerous natural stone custom residential projects in the Phoenix valley. He is a major advocate of SPEC MIX mortars. “I use SPEC MIX Building Stone Mortar on all of my full-depth stone jobs,” he said. “You getter better production with this mortar, and it cleans off the face of the natural stone better. If we use regular Portland and lime mixes, there can be excessive lime stains left on the face of the stone. With SPEC MIX Building Stone Mortar we don’t get that.” SPEC MIX Building Stone Mortar is the only pre-blended, specially formulated mortar produced for stone masons 20

MASONRY

B Y J ENNIFER M ORRELL

Cleaning natural stone can be a touchy subject for masons. You want a clean, beautiful surface without sacrificing the stone material’s natural state and condition. To learn more, Masonry consulted with natural stone cleaning expert Jim Lucas, who represents PROSOCO, Mortar Net USA, Cortec Corp. and JE Tomes. Lucas has nearly 45 years of experience as an independent manufacturer representative in the industry. He has been a member of the Construction Specifications Institute since 1970. He also is a member of the Association of Licensed Architects, the International Concrete Repair Institute, the Wisconsin Chapter of the American Concrete Institute, and the Wisconsin Masonry Alliance. Lucas’ awards include the CSI’s Brousseau Award and the AIA’s Chicago Chapter Distinguished Service Award. He has written articles addressing masonry cleaning, repointing and restoration for various industry magazines. He also is a speaker and AIA Learning Unit Provider for PROSOCO, Mortar Net Solutions and Cortec Corp. Following is what he had to say.

Masonry: Discuss different cleaning considerations for varying types of natural stone, including limestone, marble, granite, cultured stone.

Jim Lucas: The first step in cleaning stone is to identify the stone. Natural Stone can be silica based or calcium based. The silica stones are granite, sandstone (including bluestone), slate, gneiss, schist and basalt. The calcium-based stones include limestone, travertine and marble. From a cleaning standpoint, the main difference is that the silica stones are insensitive to most acids, and the calcium-based stones are sensitive to most acids. The fastest way to identify them is with a drop of hydrochloric (or muriatic) acid. If it fizzes, it is a sensitive stone. If it lies on the stone like water, it is an insensitive stone. Cleaners containing acids are often appropriate for concrete pavers. Clay pavers can be treated like silica based stone.

Masonry: How important is determining pressure and volume for each project? What about accessories, like brush types? Also, talk about cleaning agents – when are they necessary?

Lucas: Water pressure is of little importance in cleaning stone. Water volume is very important. I like to see a power washer being used but I want a fan tip and pressure less than 1,000 psi.

Masonry: How is cleaning mortar from a newly finished natural stone project going to differ from cleaning older, stained natural stone?

Lucas: The answer to this question is enough to fill a book. I can address the mortar issue easily enough, but stained, older stone is much more difficult to address. Not only do you need to identify the stone, but you need some info about the stain. Some common ones are tire marks, sealer blush (turning milky white), algae, moss, mold, mildew, leaf stains (especially oak trees), insect fecal matter (often called “tree sap”), oil stains from food, body oils or automotive fluids, deicing salt stains (commonly called efflorescence), hard water deposits (improperly aimed sprinklers), smoke and exhaust. Then, you have the issue of water usage. If this is an interior application, we can’t use much water. Churches and office lobbies are typical. Finally, you have stains that are actually part of the stone. Indiana Limestone often has quarry sap stains. Ohio sandstone often has metallic oxidation staining in new stone. Bluestone often exhibits a rusty orange discoloration. Quarry sap must just disappear as the stone reaches equilibrium with the environment. Metallic stains in Ohio Sandstone are just part of the beauty of the stone. Orange stains on bluestone can be chemically reversed.

November 2014 • www.masoncontractors.org

The Voice of the Masonry Industry

Download our FREE Rainbow™ Masonry Designer at the iTunes® App Store

Now Perception is Reality Collaborate in real-time with customers on your next masonry project. Since your brick or block façade can be 20% mortar, today’s design decisions incorporate more than merely brick color. Your \nlmhf^kl g^^] mh l^^ ma^ _nee `Zfnm h_ fZlhgkr \ahb\^l _hk rhn mh `^m ma^ li^\ kb`am ma^ Ö klm mbf^' Now there is a tool that illustrates your masonry vision and facilitates instant collaboration. The new Rainbow™ Masonry Designer App allows you to choose brick colors, bonds and 60 mortar colors \k^Zmbg` ma^ i^k_^\m \ZgoZl mh laZk^ rhnk ikhc^\m b]^Zl' : pahe^ g^p iZe^mm^ bl Zm rhnk Ö g`^kmbil mh ^qiehk^% \heeZ[hkZm^% Zg] lZo^ rhnk fZlhgkr l^e^\mbhgl [^_hk^ l^g]bg` ma^ li^\bÖ \Zmbhgl mh rhnk supplier for samples. Help bring your vision and spec to reality to save time and money. Download our free Rainbow™ Masonry Designer for iPad at iTunes. Just go to the App Store and type in Holcim Technology Center. 888-646-5246 www.holcim.us

Perfecting Progress™

N AT U R A L S TO N E

The project took three years to complete, with close to 30,000 man hours of work. building full-depth natural stone walls. The product is engineered to match the specific properties of each stone to increase the mortar-to-stone bond strength and maximize a mason’s productivity. With all mix constituents and pigment pre-weighed and bagged, Sutter’s jobsite laborer simply loaded the SPEC MIX G7000 Silo System with 3,000-pound bulk bags. With the silo full, either the laborer or lift operator was able to charge the mortar mixer and add the appropriate water demand for the desired consistency of the masons installing the stone. In the case of the schist stone, Sutter Masonry used a

Build green.

Premium all-natural building stone Arriscraft’s Natural Process technology mimics how natural stone is formed and delivers all-natural products with the durability of quarried stone.

arriscraft.com 22

MASONRY

thick mortar bed to place the stone in both horizontal and vertical (soldier) fashion, as specified by Brown. Jack speaks to the company’s earlier years: “Back in the old days, mixing the bags of cement and lime together with sand was never consistent. Now with the SPEC MIX products especially their colored mortars, every batch is the same, which is better for the guys to work with and we deliver a better masonry building to the owner.” In all, the project took three years to complete, with close to 30,000 man hours of work. The concrete masonry crew that dealt with the concrete base work on the home consisted of 25 masons and mason tenders. The crew worked more than 7,000 collaborative hours on the home. The stone crew worked on all interior and exterior stone applications, and consisted of 31 masons and mason tenders who worked more than 21,000 collaborative hours to make the house a dream come true for its owners. Sutter Masonry also builds countless projects whereby the architect has selected natural, thin cut stone applied over concrete or CMU to achieve a certain aesthetic appeal. “On natural, thin cut stone veneer warranteed for life. jobs, my crews use nothing but SPEC MIX Polymer Modified Stone Veneer Mortar – I love the product,” said Sutter. “Our daily production with this mortar is incredible; once the stone makes contact with the mortar on the wall, it sticks and you move on to the next stone.” ❙MAS

November 2014 • www.masoncontractors.org

The Voice of the Masonry Industry

THE LULL IS OVER.

MOVE FORWARD WITH PETTIBONE.

TRAVERSE SERIES • Horizontal boom transfer – 70" • Max. lift capacity – 11,000 lbs. • Max. lift height – 67'* *With optional 10’ elevator attachment

The PPettibone ettibone TTraverse Trraverse Se Series ries telehandler telehandler features features a horizontally traversing boom. market with manyy ttelehandlers understandable nderstandable for contractors to get cau caught ght in In a cconstruction onstruction mark et wi th so man elehandlers aavailable, vailable, itit’ss un there thatt stands out, mo moving a lull... But the re is a ttelehandler elehandler tha ving loads bbyy sliding iits ts boom forward forward — Pettibone Pettibone Traverse. Traverse. horizontal transfer placement tightt ar areas, without having TTraverse’s raverse’s horizon ansfer capability capability delivers delivers precision precision load pla cement in tigh eas, wi thout ha ving tal boom tr machine productivity jobsite safety. technology can can enhance enhance produ ctivity and jobsi te saf ety. And PPettibone to rreposition eposition the ma chine iitself. tself. This technology ettibone place is the pla ce to find iit.t.

Now Now that that the lull is over, over, move move forward forward with with Pettibone. Pettibone.

w ww.gopettibone.com www.gopettibone.com

Case Study:

Cleaning the Nebraska State Capitol FOR YEARS PRESERVATIONISTS HAVE HAD TO RELY ON INVASIVE AND LABOR-INTENSIVE TECHNIQUES TO CLEAN MASONRY STRUCTURES. With the recent restoration projects at the Nebraska State Capitol, preservation staff looked for the latest developments in masonry cleaning. These techniques were tested for effectiveness to clean and preserve the Capitol.

BY ROXANNE SMITH Photos courtesy of Office of the Nebraska Capitol Commission

MASONRY

November 2014 â&#x20AC;¢ www.masoncontractors.org

The Voice of the Masonry Industry

I TRUST At the 1998 beginning of the Exterior Masonry Restoration Project, architectural consultants advised using a new cleaning technique, â&#x20AC;&#x153;FaĂ§ade Gommage.â&#x20AC;? The technique uses a mineral abrasive that is the consistency of talc to clean the tower faĂ§ade, rather than sand blasting as was previously done in the 1970s. The premise being that the aluminum oxide abrasive would remove the algae and dirt only, rather than clean and etch the surface as sand blasting does. Further testing on the base of the building revealed that the soiling and algae on the exterior could be removed successfully by first applying a biocide treatment, and then high-pressure washing. The research and testing of cleaning techniques on the exterior limestone facade resulted in the most effective and least invasive technique being used to clean the Nebraska Capitolâ&#x20AC;&#x2122;s Indiana Limestone exterior. The soiling on the interior walls of the Capitol results from a different set of circumstances than those affecting the exterior. There are three kinds of interior soiling to be addressed. Discoloration of the limestone is a result of mineral staining from leaks, soiling from indoor air pollution and soiling from human contact with surfaces. Humans excrete acids and oils that are absorbed by the porous limestone surfaces when touched by hands and other parts of the body. These three types of soiling have different chemical compositions. Capitol conservation staff members have

FOR ALL MY SCAFFOLDING & SHORING NEEDS.

SCAFFOLDING & SHORING t RENTALS t 4"-&4 4&37*$&

SUPERIOR SERVICE t &3&$5*0/ %*4."/5-*/( t 1*$, 61 %&-*7&3:

SCAFFOLDING TRAINING t $0.1&5&/5 1&340/ t )";"3% "8"3&/&44

TOLL-FREE 866-454-2766 WWW.CROMEQUIPMENT.COM

Poultice application: A mason tests a spot to remove body oil from the wall behind an elevator bench. www.masonrymagazine.com

November 2014

M A S O NRY

N AT U R A L S TO N E

An integrated latex/detergent poultice product was successful in cleaning the water stains and overall soiling on the walls of the George W. Norris Legislative Chamber with minimal negative impact.

tried different techniques to clean the interior walls, from scrubbing with soap and water to applying a clay poultice. Both of these methods require extensive preparation to protect the surrounding surfaces – large quantities of water that may further damage surfaces and then more cleanup of the work site.

FILL BLOCK WALLSS

:DWFK YLGHR RI WKH 3XPS0DVWHU DW DLUSODFR FRP EORFN¿OO 26

MASONRY

November 2014 • www.masoncontractors.org

The Voice of the Masonry Industry

Tough Enough – for the Rough Stuff Professionals with the most demanding jobs demand the tough quality of STIHL Cutquik® cut-off machines. They’re packed full of power and loaded with features that deliver convenience, comfort and cost-effectiveness. The long-lasting X2 Air Filtration System saves time on maintenance, while the IntelliCarb™ compensating NEW! GS 461 Rock Boss® carburetor maximizes engine performance. Plus, features like the Electronic Water Control system mean less time adjusting – and more time cutting. If you need to cut through concrete, metal, asphalt, masonry, stone or ductile iron, STIHL Cutquik® cut-off machines deliver the power and performance to get the job done.

Scan to learn more about the STIHL TS 500i

NEW! TS 480i

TS 500i

Addison, IL

Chicago, IL

Des Moines, IA

Lemont, IL

River Grove, IL

McCann Industries, Inc. 543 S. Rohlwing Road (630) 627-8707

Turek & Son’s 1333 S. Jefferson St. (312) 850-1333

Logan Contractor Supply, Inc. 4101 106th St. (515) 253-9048

Concrete Clinic 13089 Main St. (630) 257-5440

Murphy Contractor Equip. 2420 N. River Rd. (708) 456-6900

Bloomington, IL

Chicago, IL

Dubuque, IA

Morton, IL

Warrenville, IL

Midwest Construction Rental 810 North Linden St. (309) 829-1046

Way-Ken Supply Co. 4640 W. Belmont Ave (773) 283-2413

J & R Supply Inc. 220 Frentress Lake Road (815) 747-6501

Mathis Kelley Const. Supply 1046 W. Jefferson Street (309) 266-9733

R & J Construction Supply 30 W. 180 Butterfield Rd. (630) 393-9020

Cedar Rapids, IA

Crystal Lake, IL

East Peoria, IL

Ottumwa, IA

Waukegan, IL

Campbell Supply Co. 2127 N. Towne Lane NE (319) 395-0991

Lee Jensen Sales Co., Inc. 101 W. Terra Cotta Ave. (815) 459-0929

Altorfer Rents 601 W. Washington St. (309) 694-9898

Carroll Dist & Const. Supply 205 South Iowa Ave. (641) 683-1888

Burris Equipment Co. 2216 N. Green Bay Rd. (847) 336-1205

Chicago, IL

Davenport, IA

Hanover Park, IL

Palatine, IL

O’Leary’s Contractors Equipment 1031 N. Cicero Ave (773)-252-6600

Gierke-Robinson Co. 3929 West River Road (563) 322-1725

Bracing Systems, Inc. 4N350 Old Gary Ave. (630) 665-2732

Multiple Concrete Assoc. 20284 N. Rand Road (847) 438-2000

STIHLusa.com

Product to Watch

N AT U R A L S TO N E

Arriscraft Thin-Cut Limestone

The latex/detergent poultice has cleaned all soiling conditions, the mineral deposits, general soiling from smoke and airborne particles, and hand soiling on the limestone surfaces. During the planning of the 2008 West Chamber Restoration Project, Capitol Preservation staff and consulArriscraft, a General Shale Company, introduces Adair Marble Overlay – thin, easy-to-install limetants looked for an interior cleaning stone units. The material complements Arriscraft’s thin-clad collection, architects, designers and product that would be effective and builders can now incorporate the distinction of quarried limestone into virtually any project. less invasive. They did not want water Suitable for interior and exterior applications, Adair Marble Overlay offers flexibility. The slender, spray or clay dust spread throughout random lengths create a dry-stack design that can be laid in horizontal or vertical patterns for disthe highly finished legislative chamtinctive, customized outcomes. Adair Marble Overlay is adhered to a suitable solid substrate and is ber and onto the finished surfaces of installed with dry joints (i.e. without mortar). the walnut desks, gold leafed ceiling Adair Marble Overlay is available in the color Blue-Grey. As a naturally occurring material, it has and wool carpet. A new integrated variations in color and pattern, which add to the beauty and character of the product. latex/detergent poultice product was successful in cleaning the water stains and overall soiling on the walls of the George W. Norris Legislative Chamber with minimal negative impact. In 2009, a conservation consultant and Capitol conservation staff continued testing of the latex/detergent product in two areas of significant mineral staining. Because a new copper roof was installed over the southwest quadrant, conditions that had allowed the staining to occur were resolved, and cleaning began in the southwest elevator vestibule on third floor. This cleaning proved successful, and work moved to the third floor southeast stairwell. The latex/detergent poultice has successfully cleaned all soiling conditions, the mineral deposits, general soiling from smoke and airborne particles, and hand soiling on the limestone surfaces. Capitol preservation staff members now have another tool to use in their ongoing work to clean and preserve the Nebraska State Capitol. ❙MAS Roxanne Smith is public information officer for the Nebraska Office of the Capitol Commission. She can be reached at 402471-0449. Visit www.capitol.org for more information.

Mineral deposits from leak are cleaned.

MASONRY

November 2014 • www.masoncontractors.org

The Voice of the Masonry Industry

Custom Submittal Sheets are available upon request

WIRE-BOND

12:15 PM

ON THE LINE

All event times listed are Pacific Standard Time.

4 COMPETITIONS, 1 DAY

IT’S THE BIGGEST MASONRY PARTY EVER!

9:00 AM 10:45 AM 11:30 AM

MCAA’s On The Block

MCAA MASON CONTRACTORS ASSOCIATION OF AMERICA

Hands Down the Best Handhelds LOOK AROUND ANY JOBSITE, AND YOU’LL SEE A WIDE VARIETY OF HANDHELD TOOLS. A tool exists for seemingly every task imaginable. Technology continues to evolve in the area of handheld tools to make them lighter, more efficient and super affordable. Following are a few examples of some of the industry’s best available handheld tools. BY JENNIFER MORRELL 32

MASONRY

November 2014 • www.masoncontractors.org

The Voice of the Masonry Industry

BLACK+DECKER Towson, Md.

4V MAX Lithium Pivot Screwdriver BLACK+DECKER’s 4V MAX Lithium Pivot Screwdriver is ideal for DIY projects around the home. The handle of the 4V MAX Lithium Pivot Screwdriver rotates 90 degrees, to allow for either pistol-grip or inline orientations, making it easy to use in tight spaces. With an over-molded handle and an ergonomic finger grip that follows the contours on the hand, this screwdriver is comfortable to use even during long projects. An included micro USB wall charger supplies the screwdriver with a 400 milliamp charge rate, which is up to four times greater than that of standard 100mA BLACK+DECKER chargers. The screwdriver accepts any micro USB to USB charging cable (not included) and, therefore, can be charged from a variety of ports, including a computer with a USB outlet. The screwdriver incorporates a state of charge display, which indicates remaining charge and charge progress. WWW.BLACKANDDECKER.COM

ROBERT BOSCH TOOL CORP. Mount Prospect, Ill.

EQUIPMENT DEVELOPMENT CO., INC.

EVERYTHING YOU NEED

TO KNOW ABOUT SURFACE PREPARATION, RESTORATION, PROFESSIONAL SAWING EQUIPMENT AND HAND HELD TOOLS

STAYED IN AMERICA

Visit us online edcoinc.com or call 1-800-638-3326 for more information

GLM 15 Laser Measure Bosch’s GLM 15 laser measure will change the way the world measures, with a simple, one-button operation and pocket-sized precision. The GLM 15 can go where measuring tape can't. The GLM 15 redefines simplicity. With a single touch of a button, the unit turns on and defaults to always-on measuring, perfect for walk-off measurements. Click the button again to record that measurement. And, when you're done, press and hold that same button one more time to turn it off. When close doesn't cut it, the GLM 15 delivers quick and reliable accuracy. Bosch engineered an exclusive solution for smaller laser components. With its patented small technology, the GLM 15 fits in a pocket to go anywhere. A square, flat design makes the product easy to use on any surface. Rest it on a flat surface, and measure in any direction with the display screen pointed the same way. WWW.BOSCHTOOLS.COM

DEWALT New Britain, Ct.

Precision Lasers in JobsiteTough Design DEWALT introduces two new self-leveling professional lasers in a rugged, jobsite-tough design for precise leveling and point transfer applications. The new Three Beam Spot Laser (model DW08301) www.masonrymagazine.com

November 2014

M A S O NRY

H A N D H E L D TO O L S

and Cross Line Laser (model DW08801) feature powerful laser diodes for exceptionally bright lines and point visibility at an approximate price of $99.99. Both lasers automatically self-level using an internal pendulum. If the angle of the tool exceeds four degrees from level, the laser will blink and an indicator will blink signaling it has exceeded the four degrees in which it is able to self-level. The lasers feature a locking pendulum so the internal components don’t bounce around risking potential damage when the lasers are not in use. To handle demanding jobsite conditions, both lasers feature robust, rubber over-molded designs and an IP54 water/debris resistance rating to help prevent moisture and dust from entering the laser. WWW.DEWALT.COM

lenging conditions. Simple to use, these laser range meters have an accuracy of +/- 1/16 inch. The PD-E laser range meter is streamlined for exterior applications. Designed for use in direct sunlight, the new E-paper screen technology allows for superior readability even in the most challenging light conditions. And, the precision optical targeting sight makes long distance measurements up to 656 feet much easier. The PD-I for interior applications measures up to 328 feet, making overhead measurements without the use of a ladder or forklift possible and helping to increase workplace safety. WWW.US.HILTI.COM

MILWAUKEE TOOL Milwaukee, Wis.

SDS Plus Rotary Hammer on One Battery System

HILTI INC. Tulsa, Okla.

Laser Range Meters PD-I and PD-E The new Hilti Laser range meters PD-I and PD-E offer the latest in measuring technology, enabling reliable measuring performance. Whether measuring long distances, calculating areas and volumes, or in difficult to reach situations, the PD-I and PD-E take measurements quickly and accurately. Hilti Pulse Power Technology allows for reliable measurements even under chal-

MASONRY

November 2014 • www.masoncontractors.org

Milwaukee Tool redefines the cordless SDS Plus rotary hammer market with the addition of two M18 FUEL models that will round out the line and deliver the market’s first and only full SDS Plus solution powered by one battery system. The SDS Plus rotary hammer market is divided into three product segments that

The Voice of the Masonry Industry

WORLD’S FIRST

4-STROKE ENGINE POWER CUTTER FAST STARTS*

The MAKITA TEAL COLOR is the trade dress of Makita Corporation and is protected under common law and registered with the U.S. Patent and Trademark Office. *vs Makita 2-stroke Power Cutter The MAKITA BLACK & WHITE COLOR combination is the trade dress of Makita Corporation and is protected under common law and registered with the U.S. Patent and Trademark Office. MA-4276-14

REDUCED COSTS No 2-Stroke Oil Longer Piston & Cylinder Life

up to

40% Easier Pulls Pressure Compensated Carburetor

SUPERIOR HANDLING Less Vibration & Noise - 93.2dB(A) Retracting Aluminum Wheels

NEW 14” MM4™ 4-Stroke Power Cutter EK7651H

**Shown with optional 14” Ultra-Premium Segmented Diamond Blade T-02537

2-STROKE vs. 4-STROKE HOW MUCH COULD YOU $AVE? Use our Fuel Savings Calculator to see how much you could save by switching to 4-Stroke. makitatools.com/MM4

MakitaToolsPage

MakitaTools

MakitaPowerTools

MakitaTools

H A N D H E L D TO O L S

satisfy varying user needs: compact, medium and large. The market is currently trending away from corded and into cordless, as users look for increased productivity. Manufacturers have developed tools for the compact segment on 12V to 18V platforms and in the medium to large segments on 18V to 36V platforms, but none offered the complete range of solutions on a single battery platform. The technology did not exist to use a single battery platform that was small enough for use on compact tools, but powerful enough for medium and large tools. WWW.MILWAUKEETOOL.COM

performance transmission deliver up to 330 watts to maximize drilling and fastening applications. The variable, twospeed gear transmission delivers 400 RPM for high-torque applications and 1600 RPM for high-speed applications, while the hammer mechanism powers through material at 27,200 BPM. The Hammer Drill features a 1/2-inch metal ratcheting chuck that minimizes bit slippage. The Hammer Drill’s lightweight, compact design and slim, ergonomic handle provides comfort during use. WWW.PORTERCABLE.COM

PORTER-CABLE Towson, Md.

STANLEY New Britain, CT.

V MAX Linked System

FatMax Auto-Locking Tape Lineup

PORTER-CABLE launched its 20V MAX Hammer Drill, which is ideal for use on brick, block and concrete materials found in HVAC, plumbing, electrical and residential building applications. Its powerful motor and high-

Stanley added a new 16-foot FatMax auto-locking tape rule – model FMHT33316 – and 30-foot FatMax auto-locking tape rule – model FMHT33348 – to its lineup of FatMax auto-locking tape rules. Stanley introduced the new, 25-foot FatMax auto-locking tape rule – model FMHT33338 – in 2013. At the heart of every professional’s tool collection is a tape rule. The new FatMax tape has a blade that automatically locks at the length to which it is extended. When the release button is depressed, the blade retracts. The auto-locking feature allows users to control tape retraction, which helps to provide long blade life. The tape also features a manual mode – a setting used to override the auto-locking mechanism, enabling it to become a traditional retractable tape by depressing the button and pulling back away from the hook. Featuring a customizable hook system, users can configure their tape for the right application. ❙MAS WWW.STANLEYTOOLS.COM

MASONRY

November 2014 • www.masoncontractors.org

The Voice of the Masonry Industry

A powerful pair of saws.

Husqvarna’s all-around power cutters, the K 760 and

the more powerful K 970, are the perfect solutions for most jobs. The K 760 boasts the lowest vibrations, below 2.5 m/s2, on the market and both feature a fuel-sipping X-Torq® engine. The K 970 features a more powerful engine, 6.4 hp, perfect for highway or demolition work. To see more features, visit www.husqvarnacp.com.

K 760 %+($$ KYgh %%-h\ GhfYYh C`Uh\Y ?G **$*% H ,$$!&,,!)$($ : ,$$!,&)!$$&, kkk"\igejUfbUWd"Wca 7cdmf][\h &$%( <igejUfbU 56 diV`" " 5`` f][\hg fYgYfjYX" <igejUfbU ]g U fY[]ghYfYX hfUXYaUf_ cZ <igejUfbU 56 diV`" "

K 970

LEED:

A Focus on Product Transparency WHEN USGBC LAUNCHED LEED V4, IT SIGNIFICANTLY ADVANCED ITS MISSION to “transform the way we think about how buildings and

BY JULIE RAPOPORT

MASONRY

communities are designed, constructed, maintained, and operated.” It was, perhaps, the most significant shift in program approaches since LEED was started 14 years ago, with changes designed to push designers and builders into new realms of sustainability innovation.

November 2014 • www.masoncontractors.org

The Voice of the Masonry Industry

Hancock Elementary is slated to be the first LEED-certified K-12 school in Mississippi. Though it was designed prior to LEED v4, the architects employed product benchmarking practices to compare environmental impacts in several product categories.

Some of the most dramatic changes came in the Materials & Resources (MR) section, where product transparency and life cycle assessment (LCA) are given considerable emphasis – encouraging, if not forcing, a more holistic view of product specification. In previous versions of LEED, the MR section included credits for single attributes such as recycled content or regional materials (sourcing products from within 500 miles of the jobsite). That initial approach was suitable for the program in its early years, when the idea of green certification and specifying green materials were new concepts. The earlier versions of LEED also wound up driving change at the manufacturing level and led to more sustainable products. “For the place where the market was 10 years ago, that was an effective way to define what a green product was,” says Sarah www.masonrymagazine.com

November 2014

M A S O NRY

GREEN BUILDING

With experience, it is now easier to build a green building than it was a decade ago. Buffaloe, LEED materials specialist at USGBC. “As a result of these credits, we saw an uptick in information available and in new products. For example, we saw an incredible supply chain transparency start to appear as a result of the awareness of regionality as a sustainability factor.” But most stakeholders agree that, while that initial approach had value, it also had limitations. Most notably, it essentially allowed people to pick some attributes, while ignoring others. For example, a product that incorporated a large quantity of recycled material could earn credits, even if that product also had a high carbon footprint. With experience, as well as a much wider selection of green products, it is now easier to build a green building than it was a decade ago. USGBC recognized that they could encourage people to look for ways to get even greener, and challenged the program committee to look at the MR credits more holistical-

QUALITY

Under LEED v4, architects can earn credits for specifying products that have a third-party-verified environmental product declaration, such as that available from CalStar.

ly. The result is LEED v4, released in 2013, in which the MR section promotes product transparency by awarding credits for using products with LCAs and that reduce environmental impact in multiple ways instead of just one. How it works UNDER LEED v4 Materials & Resources, users can earn several credits. Product Disclosure and Optimization

quality. From forging and form f g and finish grinding, Trow & Holden tools have been handmade to last from USA-sourced materials for 125 years. We offer: • the largest variety of stoneworking hammers, • the widest selection of carbide-tipped hand tools, • stone splitting wedges and shims ranging in hole sizes from 3/8” to 2” diameter, and • pneumatic carving hammers guaranteed for life. Find us online or feel free to give us a call ... We are proud to offer the highest quality stoneworking tools available anywhere. 45 So. Main Street, Barre, VT 05641 • 1-800-451-4349 www.trowandholden.com • Follow us on Facebook Call for a free catalog. MADE TO LAST SINCE 1 18 89 90 0 IIN N B BA AR RR REE,, V VEER RM MO ON NTT U USSA A

MASONRY

There are credits available for using products that state what materials are used (product disclosure). There are also credits for products whereby manufacturers reduce the environmental impact (product optimization). There are several ways to get these credits: Environmental Product Declarations Option 1. Use products with some sort of Environmental Product Declaration (EPD). • Product-specific declaration. • These are products with publicly available, critically reviewed LCAs conforming to ISO 14044. Products with externally verified LCAs are considered more transparent than those with internally verified LCAs. • Or Environmental Product Declaration • This is a document based on the results of the LCA published by the manufacturer. It shows the

November 2014 • www.masoncontractors.org

The Voice of the Masonry Industry

environmental impact of the product in a variety of categories (e.g., fossil fuel depletion, global warming potential, etc.). This document can be weaker or stronger depending on the rigor of its third-party review. • Or USGBC-approved program that creates some sort of EPD or other sustainable product certification. And/or Option 2. Multi-Attribute Optimization • Use third-party products with documented reduction in environmental impact in at least three categories, compared to industry average. Note that this option requires some sort of industry average information to be available, which is not always the case. Categories include global warming potential (greenhouse gases), depletion of the stratospheric ozone layer, acidification of land and water sources, eutrophication, formation of tropospheric ozone, and depletion of nonrenewable energy resources (fossil fuel use). • Or products must comply with USGBC approved multi-attribute frameworks. In addition, extra credit is given for products sourced within 100 miles of the project site. This is one way in which the regional materials attribute is retained with LEED v4.

Sourcing of Raw Materials THE IDEA HERE is to reward stakeholders for using products verified to have been sourced responsibly. Option 1. Raw Material Source and Extraction Reporting • Manufacturers use raw materials suppliers who source materials responsibly and have clear, ecologically responsible land use practices, as well as a commitment to reduce environmental damage that could result from material extraction. And/or Option 2. Leadership Extraction Practices • The user specifies a certain amount of products that meet requirements for “extended producer responsibility” or “leadership extraction” criteria. Functionally, all wood specified is FSC-certified. The recycled materials and materials reuse attributes in previous versions of LEED are embedded in this credit. Extra credit is also given for products sourced within 100 miles of the project site. Material ingredients THE IDEA BEHIND this credit is to ensure that manufacturers reduce use and generation of harmful ingredients. Option 1. Report all ingredients that make up at least 0.1% of product. Manufacturers can keep intellectual property or

Tools with Built-In Dust Collection Grind • Drill • Cut • Mix Collect concrete, masonry and coatings dust HEPA Vacuum For maximum dust collection

7" Diamond Saw

Diamond Core Drills

Cut wet or dry up to 2-1/3" deep

Tile Core Drill – Wet drilling of holes up to 1" dia.

Wet or dry up to 18" diameter

NEW

MEGA HIPPO

Concrete Grinders

Dust collection

Mix,transport & pour with one unit! Automatic filter cleaning system – cleans filters while you work, maintaining maximum suction and air flow!

Mixing Drills for construction compounds

Hand-Held & Walk-Behind 5", 7" & 9" Models

CS Unitec offers a range of portable power tools. For more information, please contact us.

See videos and more at

www.csunitec.com www.masonrymagazine.com

Remove paint, epoxy, glue and other hard coatings EBS 235

1-800-700-5919 November 2014

M A S O NRY

GREEN BUILDING

In The News

BSD Supports Green Initiatives

Building Systems Design Inc. (BSD), a company offering software tools for the archiproprietary chemicals secret as long as tecture, architectural engineering and construction markets, has published revisions to they disclose what the chemicals do and 116 specification sections related to sustainable design for architects and engineers. if they are harmful. BSD SpecLink-E, BSD’s automated specification production system, has supported the And/or Option 2. Use no harmful various LEED rating systems published by the U.S. Green Building Council (USGBC) for substances. Substances of concern are many years. BSD’s latest sustainability updates support LEED v4 BD+C, USGBC’s most listed in a comprehensive database (or recent green rating system. The updates support other green initiatives, such as the Green on multiple lists). Any ingredients used Globes project developed by the nonprofit Green Building Initiative. in quantities greater than 100 ppm are BSD accomplishes this support of multiple green systems by organizing all relevant considered. design issues into five categories: And/or Option 3. Use products from • Location – Requirements intrinsic to location, such as access to transit or use manufacturers whose supply chain has of a brownfield site already been third-party verified to • Design Phase – Topics related to activities during project design, such as manage health, safety and environmensite master planning • Post-Construction – Occupancy issues, such as green power offsets and tal characteristics of chemical ingredi“no smoking” policies ents. Alternatively, source products from • Design Embodiment – Performance issues such as daylighting, views and manufacturers with robust safety, health, energy usage hazard and risk programs that docu• Contract Documents – Requirements explicitly included on drawings and/or ment at least 99 percent by weight of all in specifications, such as site boundaries for vegetation protection and ingredients that go into the product. contractor’s quality procedures. Overall, stakeholders are strongly encouraged (via the opportunity for credIn general, BSD places the sustainable design requirements in each applicable specifiits) to seek out and use products whose cation section, rather than gathered together in a single section, so the issues can be environmental impacts and supply chain addressed independently of which rating system is being used on a particular project. have been externally verified according to BSD SpecLink-E is built on a relational database, rather than word processing files, so industry-approved standards. At this early BSD has built into the database more than 170,000 “intelligent links” that help to edit prostage, having the documentation itself is ject specifications based on decisions made by the user. This linking feature is especially arguably more important than what it helpful when a design professional wishes to pursue certification under a particular green says. Several of the credits can be earned rating system. By activating Section 01 3329 – Sustainable Design Reporting, a user can select the regardless of the results. desired rating system, and make further choices from the options presented. The built-in For example, two products with exterlinks will automatically activate related provisions in other spec sections. When all necessary nally verified EPDs contribute to the sevspecification sections have been fully edited, the system can print a submittals report that eral of the same points, even if one has a lists all sections in the project requiring submittal of sustainable design documentation. significantly higher carbon footprint. (The Subscribers to BSD SpecLink-E can automatically download and install the hundreds of product with the lower carbon footprint paragraphs involved in this sustainability update through a new software feature. Instead might also be able to contribute to other of quarterly updates that replace the entire master database, BSD’s system lets users points.) At present, the goal is to promote choose to have updates downloaded as frequently as daily, but not less often than quartransparency. Once this has become stan- terly. Or, the user can download and apply all available updates to the master database dard practice, it is conceivable credits will within a few minutes. start to emphasize environmentally parable, so it is easier to understand the impact of products. preferable products. In the meantime, the information is available Where food labels contain fat content and calorie count, prodfor consideration, enabling specifiers to choose environmentally uct labels might spell out fossil fuel consumption and recycled preferable products, even if the reduced environmental impact is content. Just as some consumers might watch sodium or sugar not required to earn certain MR credits. intake depending on personal needs, some specifiers might be Catalyst for change more concerned with carbon footprint or water resources, THE OVERARCHING RESULT of LEED v4’s shift in focus depending on project needs. is the specification of more transparent products – those that The new system also allows innovative products with reduced take the holistic approach of life cycle assessment and look energy use, carbon footprint, and other environmental impacts to beyond single attributes. This allows users to understand where contribute to a variety of credits. In previous versions of LEED, environmental tradeoffs might exist so the best decisions can there were had no formal credit opportunities for these types of be made for each specific project. products, other than Innovation in Design credits. Eventually, the building industry might follow the path of Challenges remain the food industry: The FDA developed a standard nutrition label for foods so consumers can make informed comparisons. AS WITH ANY MAJOR CHANGE, there are drawProduct users would like to see building products more combacks. Possibly the biggest concern is the relative dearth of

MASONRY

November 2014 • www.masoncontractors.org

The Voice of the Masonry Industry

products with LCAs and published EPDs or HPDs. Further, finding them isn’t as straightforward as it could be. There’s no master list to discover EPDs across the industry. (Each EPD program operator has a list, but there are numerous EPD program operators.) The onus is on specifiers to perform the extra research in pursuit of increased sustainability. However, demand for these tools is increasing. Last year, the concrete industry finalized Product Category Rules (PCRs) for concrete, which laid the groundwork for concrete manufacturers to conduct individual LCAs and publish EPDs. In addition, PCRs have recently been finalized for concrete masonry units. In late-2012, CalStar Products published the first EPD in the brick category, with the document providing third-party verification of environmental impacts. CalStar bricks also received a SMaRT sustainable product platinum rating, indicating significant reduction in environmental impact, as well as supply chain transparency and minimization of harmful chemicals. These documents together allow CalStar bricks to contribute to a variety of MR credits under LEED v4. Similar advances are underway in other product categories, as well, particularly carpet, gypsum, and wood. Like the recycled content credits that initially drove industry change, USGBC’s Buffaloe expects LEED v4 to do the same:

www.masonrymagazine.com

With an environmental product declaration providing third-party verification of life cycle impacts and SMaRT certification indicating environmental savings and supply chain transparency, CalStar Products’ bricks qualify for a variety of Materials & Resources credits under LEED v4.

“Transparency enables evaluation…which enables preferential selection…which leads to innovation. And innovation leads back to reporting and transparency. It’s a cycle of its own resulting in market transformation.” Perhaps, 14 years from now, we’ll view LCAs and EPDs as commonplace and straightforward as trying to use more recycled materials and sourcing locally. ❙MAS Julie Rapoport, Ph.D., P.E., LEED AP BD+C is VP of engineering for CalStar Products.

November 2014

M A S O NRY

MCAA

TEAM

AWARDS

MCAA TEAM AWARDS GO TO 13 WINNERS AT MIDYEAR MEETING The Tribute to Exemplary Achievements in Masonry (TEAM) Awards recognize quality masonry projects resulting from strong creative vision and skilled execution. Members of the construction team also are recognized for accomplishments in masonry design and construction. The TEAM Awards ceremony took place in September during the MCAA Midyear Meeting in Milwaukee. The awards were presented to the mason contractor, general contractor, architect, masonry supplier and building owner. All projects were judged on design, craftsmanship, percent of visible masonry, overall aesthetic appeal, and masonry difficulty. The jury panel consisted of mason contractors not competing in the competition, selected by MCAA TEAM Award committee members.

2014 MCAA TEAM Awards Winners

EDUCATION: 9-12 1 Corner Canyon High School – Draper, Utah Mason Contractor: Doyle Hatfield Masonry Inc. Architect: Sandstrom Architecture General Contractor: Hogan & Associates Construction Suppliers: Buehner Block Co. Owner: Corner Canyons School District Judges’ Comments: “A beautiful combination of brick, CMU and precast.”

MASONRY

EDUCATION-COLLEGE/UNIVERSITY 2 University of N.C. Chapel Hill - Loudermilk Center for Excellence – Chapel Hill, N.C. Mason Contractor: Joyner Masonry Works Inc. Architect: Corley Redfoot Architects Inc. General Contractor: T.A. Loving Co. Suppliers: Carolina Ceramics Brick Co. Owner: The UNC at Chapel Hill North Carolina Judges’ Comments: “Outstanding arch entry with excellent craftsmanship.”

November 2014 • www.masoncontractors.org

The Voice of the Masonry Industry

GOVERNMENT 3 City of San Antonio Public Safety Headquarters – San Antonio Mason Contractor: Brazos Masonry Inc. Architect: Fentress Architects General Contractor: Hensel Phelps Construction Co. Suppliers: Texas Quarries Owner: City of San Antonio Judges’ Comments: “Simple design yet attention to detail is obvious.”

COMMERCIAL 4 Dallas Country Club – Dallas Mason Contractor: Dee Brown Inc. Architect: Marsh & Associates Inc. General Contractor: McCarthy Suppliers: Blackson Brick, Advanced Cast Stone, Headwaters, United Commercial Cast Stone Owner: Dallas Country Club Judges’ Comments: “Exquisite design of stone structure yet accompanied by brick perfectly.” www.masonrymagazine.com

LANDSCAPE, HARDSCAPE 5 Outdoor Amenities – Missouri Mason Contractor: Spencer Brickwork Architect: Dick Busch Architects General Contractor: Spencer Brickwork Inc. Suppliers: Richards Brick Co. Owner: Micheila Spencer Family Trust Judges’ Comments: “Nice radius design with attractive top of wall feature.”

REHABILITATION, RESTORATION 6 Robert A. Young Federal Building – St. Louis Mason Contractor: Superior Waterproofing & Restoration Co. Inc. Architect: Team Four Architects General Contractor: Hof Construction Suppliers: Vernon L. Goedeke Inc. Owner: Federal Government/GSA Judges’ Comments: “Huge undertaking of not just asthetic, but structural repairs.”

November 2014

M A S O NRY

MCAA TEAM AWARDS

8 10

INDUSTRIAL RESIDENTIAL: SINGLE FAMILY 7 “Cotswold” by Busch – St. Louis Mason Contractor: Spencer Brickwork Inc. Architect: Dick Busch Architects General Contractor: Roentz Homes Suppliers: Earthworks Owner: Roentz Homes Judges’ Comments: “Remarkable design and unequalled craftsmanship.”

RESIDENTIAL: MULTI FAMILY 8 Residences at Stoneleigh – Dallas Mason Contractor: Dee Brown Inc. Architect: Gromatzky & Dupree General Contractor: Yates Construction LLC Suppliers: Acme Brick Co., Featherlite, Blackson Brick, Advanced Cast Stone Owner: Maple Wolf Stoneleigh LLC Judges’ Comments: “A simple, clean design with the right blend of brick and stone.”

MASONRY

9 HEB WACO – Waco, Texas Mason Contractor: Brazos Masonry Inc. Architect: Selser Schaefer Architects General Contractor: Joeris General Contractors Suppliers: Acme Brick Co. Owner: HEB Grocery Co., L.P. Judges’ Comments: “Nice clean look of red brick and stone sills.”

INSTITUTIONAL 10 Saint Luke’s Hospital Mid America Heart Institute – Kansas City, Mo. Mason Contractor: JE Dunn Construction Co. Architect: ACI Boland Architects General Contractor: JE Dunn Construction Co. Suppliers: Kansas City Brick Co. Owner: Saint Lukes Health System Judges’ Comments: “Outstanding masonry detail throughout the entire project.”

November 2014 • www.masoncontractors.org

The Voice of the Masonry Industry

BLOCK

LEED

(MUST BE AT LEAST 65% BLOCK)

(MUST BE LEED CERTIFIED)

11 41 Area - Angelico, Beq and Recon Complex – Camp Pendleton, Calif. Mason Contractor: Haxton Masonry Inc. Architect: Vasquez Marshall Architects General Contractor: Webcor/R.A. Burch, A Joint Venture Suppliers: RCP Block & Brick Inc. Owner: NAVFAC Southwest Division Judges’ Comments: “Very nice design of an all CMU project by using different colors and textures.”

13 St. Elizabeth Hospital – Enumclaw, Wash. Mason Contractor: J & S Masonry Inc. Architect: Mahlum Architects General Contractor: Sellen Construction Suppliers: I-XL Masonry Supply Owner: Catholic Health Initiative Judges’ Comments: “Nice, simple brick design with the addition of different patterns and colors.” ❙MAS

LIGHTWEIGHT BLOCK (MUST USE LIGHTWEIGHT CMU)

12 Perdido Key Fire Station and Community Center – Florida Mason Contractor: Rod Cooke Construction Architect: DAG Architects General Contractor: Rod Cook Construction Suppliers: Block USA Owner: Escambia County Judges’ Comments: “The amount of lightweight block used in this project is impressive.” www.masonrymagazine.com

November 2014

M A S O NRY

ASSOCIATION

NEWS Ohio Masonry Association â&#x20AC;&#x201C; MCAA State Chapter In April 2014, The Ohio Masonry Association (MCAA State Chapter) held its First Annual Masonry Industry Regional Meeting. Typically, the Ohio Masonry Association (OMA) holds its State Annual Meeting at this time, but the association board decided to expand the meeting to a Regional event. A strong need and want from the masonry community to have regional events to provide education, training and networking has been expressed. The board invited Ohio, Indiana and Kentucky contractors, suppliers and manufacturers to the event, which drew more than 70 representatives from the three states. The event was held at the Hollywood Casino in Columbus, Ohio. Suppliers and manufacturers were given the opportunity to set up booths and speak about their products. Several educational meetings took place. Ray McVeigh with the PCA Great Lakes Region presented a current construction economic outlook. In 2013 U.S. cement shipments rose by 4.5 percent, and the projection for 2014 is to increase 8.1 percent. Fifty percent of that growth is expected to come from the residential market, along with 25 percent from non-residential (commercial) and 25 percent from public-governmental. McVeigh then reviewed the state outlook for Ohio, Indiana and Kentucky, individually. Jim Tann, president of the Brick Institute of America Mid-East Region, 48

MASONRY

Ray McVeigh of the PCA Great Lakes Region speaks to the OMA 2014 Annual Meeting attendees.

Pictured L to R are Linda Porter, Hon. Member John Crawford, Hon. Member Gene Fuller, Hon. Member Larry Wilson, Hon. Member Richard and Lee Ann Naragon and Hon. Member Richard and Janet Matthews.

November 2014 â&#x20AC;˘ www.masoncontractors.org

The Voice of the Masonry Industry

discussed the activities of the BIA. These included Lunch and Learn seminars with the design community, onsite training, community planning and public relations. Paul Oldham, secretary of the Mason Contractors Association of America (MCAA), discussed what the MCAA is doing for its members and the industry, including supporting changes to the proposed OSHA silica rule and the effort to create the CMU Check-Off Program. Robert Thomas, president of the National Concrete Masonry Association, gave an update on the current status of the CMU Check-Off Program. He encouraged everyone in the industry to call his or her congressman or congresswoman in support of the HR1563/S429. The OMA also celebrated 60 years of promotion. The day was followed by a reception/dinner. The association honored John Crawford, Gene Fuller, Larry

www.masonrymagazine.com

Shown L to R are Joe Russ, Oberfields LLC; John Crawford – Honorary Member inducted at 2014 OMA Annual Meeting; Linda Porter; John Doubikin, Oberfields LLC; and Gene Fuller – Honorary Member inducted at 2014 OMA Annual Meeting – Oberfields LLC at the OMA 2014 Annual Meeting reception.

Wilson, Richard Naragon, Bill Oberfield and Richard Matthews for their dedication to the industry, years of service and volunteer participation. The Ohio Masonry Association plans to expand this event in the coming years with continued support from the NCMA, BIA and MCAA. ❙MAS

Jim Tann of the BIA presents at the OMA 2014 Annual Meeting.

November 2014

M A S O NRY

FULL CONTACT PROJECT MANAGEMENT By “Coach” Gary Micheloni

Why Thanksgiving Is in our Heritage

MASONRY

Gen. McAuliffe sent a reply back with the German messengers. It became one of the most quoted sayings from the War. He said to the messengers to give their commander this reply to his demand of surrender: “From the American commander to the German commander: NUTS!” With the messengers looking bewildered, some American soldiers told them that they could translate the general’s message as this: “Go to hell!” The American forces never did surrender there. They somehow held on through January, even inflicting a heavy toll on the enemy, until Gen. George Patton broke through and brought in the reinforcements that chased away the enemy. So this Thanksgiving, should you be sitting in your own version of “out in the cold,” whatever that might be from business issues to personal, do yourself a huge favor and remember what is actually before you. We sometimes talk about having too much on our plates to handle more. When you put it all into perspective, you do have a lot on your plate. But I’m talking about food, shelter and freedom. It’s all pretty much just plopped there for you, isn’t it? If you disagree, then do a little comparison shopping among third-world countries. Heck, can you name more than a couple, even from the first world? Probably not. For most Americans, Thanksgiving 2014’s “Battle of the Bulge” will have nothing to do with a pending military battle, but simply eating too much.

November 2014 • www.masoncontractors.org

Thanksgiving is upon us. Some of us Americans may have a tendency to take for granted this holiday as a much-welcomed, four-day weekend. Of course, it is so much more than that, and this year I’d like to challenge you. But first, I need to remind you of a piece of history. Seventy years ago, on Dec. 16, 1944, German forces launched a surprise offensive against the U.S. Third Army in the Ardennes, a heavily forested area in France, Belgium and Luxembourg. This became popularly known as the Battle of the Bulge. Here are the numbers: 610,000 U.S. forces in the battle, suffering 89,000 casualties, including 19,000 killed. It was the largest and bloodiest battle fought by the U.S. in World War II. And, it was horribly expensive for the German war machine, as well. This battle raged on through Jan. 25. Picture that battle, not only for the troops involved, but also for those families back home who would shortly be notified of a terrible loss. Do this as you and your family sit around the dinner table this Thanksgiving. Add to this picture the realization that those hundreds of thousands of soldiers were outside and in the cold for a month and a half, on short rations, with low supplies of ammunition, and in complete surround by the enemy. The German commander sent a message under a flag of truce to Brig. Gen. Anthony McAuliffe, who was commanding the U.S. 101st Airborne Division, demanding the immediate and unconditional surrender of his forces, or they’d suffer complete annihilation.

Wouldn’t it be great if that were not the case this year, and we could reflect on the events some seven decades ago, grateful for those who did what they did. As the saying goes, “All gave some; some gave all.” Be really, really thankful. ❙MAS Gary Micheloni is a construction company marketer, working project manager, speaker, author, consultant and coach. Copyright 2014 Gary Micheloni

COACH GARY’S CORNER: What’s your plan for 2015? Are you marketing your company, driving business to it, or are you just hoping that you’ll run into some? Write Coach Gary at FullContactTeam@gmail.com. He loves to get questions. Business development and marketing coaching will help you get where you want to be in less time, and with more success. Ask Coach Gary to speak for your group, association or convention, or even to coach your company. Coach Gary’s first book, “Get Paid for a Change!” is available at Amazon.com. Pick it up there; change your business.

The Voice of the Masonry Industry

Is your flashing cutting this guy’s productivity in half?

TotalFlash flashing panels

Experienced masons are hard to find these days, so you need to get the most out of their time. Using TotalFlash® from Mortar Net Solutions cuts flashing installation time by as much as 50% over field installed pieces and parts. So every time a mason installs flashing that isn’t TotalFlash, you’re cutting his productivity in half.

TotalFlash®, the industry’s only complete flashing system for masonry cavity walls. For a free TotalFlash sample, call 219-850-4505, or email kcleveringa@mortarnet.com

800.664.6638 mortarnet.com Scan here to see TotalFlash installation videos

CLASSIFIED A D V E R T I S I N G

TO RESERVE YOUR CLASSIFIED AD SPACE, Contact: Marvin Diamond â&#x20AC;˘ Phone: 770.431.0867, ext.208, or 888.303.5639 â&#x20AC;˘ FAX: 770.432.6969 or Email: marvin@lionhrtpub.com

P R O F E S S IONAL SER VICES ADVERTISING The Industr Industryâ&#x20AC;&#x2122;s yâ&#x20AC;&#x2122;s Most P Powerful ower fu Handpump Â&#x2021; Rugged lightweight aluminum construction Â&#x2021; Injection pressures of more than 200 psi Â&#x2021; Disassembles in minutes without tools Â&#x2021; Large 5 gallon hopper Â&#x2021; Durable 2" piston pum p 708.354.7112

Vertical lift exceeding 150 ft.

FIELD CONSULTANTS NEEDED The demand for Non-Stop Scaffolding is growing very rapidly. We are seeking hands-on masonry professionals in all areas of the United States. Duties include pre-purchase education, job layout, customer installations, OSHA training, and handling questions from GC's safety consultants. You must be able to work with future customers to assess their immediate needs and tailor financing options. Training is provided. Compensation is above industry standard.

Send resume to breithaupt@gmail.com

www.chemgrout.com www .chemgrout.com

TOM MORIN, PRESIDENT Gro Mor Inc. | Pave MorÂŽ t XXX QBWFSQMBDFS DPN t XXX HSP NPSFOU DPN MADE IN THE U.S.A.

Cast Stone Seminar Courses Available

4488 Wagon Trail Avenue Las Vegas, NV 89118 (800) 445-1697 (702) 871-4553 Office (702) 871-8106 Fax Come Visit us at the World of Concrete February 2 - 6 2015, Booth #N2263 Sales@prdiamond.com | ww.prdiamond.com â&#x20AC;&#x153;Call us today for the Masonry Magazine Specialâ&#x20AC;?

Professional Services Advertising Your companies product or servicemessage featured in every issue of MASONRY for just $195 per issue

â&#x20AC;˘ 2 Day professional cast stone GFRC precast Training

â&#x20AC;˘ 5 Day advanced cast stone GFRC precast Training

â&#x20AC;˘ 1 Day professional mold making workshop

â&#x20AC;˘ 5 Day advanced mold making workshop

â&#x20AC;˘ 2 Day outdoor installation application training Learn more at WWW.VENTURACASTSTONE.COM Call 805-386-8185 email: mail@venturacaststone.com

Contact: Marvin Diamond

Phone: 888.303.5639, ext.208 â&#x20AC;˘ E-mail: marvin@lionhrtpub.com

WANTED: Used Fraco 8000 LB and 20K with ladder extensions. Please email me at

smonarca@acranommasonry.com or call 860-883-6161 ask for Sal.

RESERVE YOUR CLASSIFIED AD SPACE Contact: Marvin Diamond Phone: 770.431.0867, ext.208, or 888.303.5639 FAX: 770.432.6969 or Email: marvin@lionhrtpub.com

MASONRY

November 2014 â&#x20AC;˘ www.masoncontractors.org

The Voice of the Masonry Industry

I N D U S T RY N E W S

Please submit your news and events to: jmorrell@lionhrtpub.com

MCAA New Member Benefit: Intelligent Leads by CMD Insight Members of the Mason Contractors Association of America (MCAA) can access CMD Insight at a special discounted rate. Through a partnership with Construction Market Data, MCAA members will receive the CMD Insight package for only $750 per year. Don’t spend your valuable hours searching and researching projects. With Intelligent Leads on the Insight Platform, finding new project opportunities is faster and easier than ever. Intelligent Leads is an all-new way to uncover your best project opportunities. Flexible search options and easyto-use filters give you instant access to a database with hundreds of thousands of projects, as well as plans, specifications, key players, contact information, and even email addresses. You’ll have everything you need to find, bid, win and keep a steady pipeline of new work. Add fully searchable plans and specs as well as exclusive Material Demand options, and you’ll be able to fine tune your project search even further, focusing your efforts on projects that mean the most to your bottom line. Let Intelligent Leads do the research for you. You have better, more profitable things to do with your time. You can find work faster and easier

• Instantly display relevant projects with the most visual, resultsoriented platform available • Use saved searches to effortlessly follow projects and project types • Switch from project to company view with just one click • Download, export and view plans and specs – even on your tablet and mobile device You can set it and forget it

• Keep up-to-date on project updates with automatic notification tools • Get important bid date reminders, personalized to your schedule www.masonrymagazine.com

• Track both partner and competitor activity to gain a competitive edge

cialists to the latest extraction technologies, CMD uses all possible resources to get you the most accurate, dependable project information available.

You can take it up a level

• Discover projects based on key words in the documents, using optional fully searchable plans, specs and schedules • Identify and target projects that have the most potential profit for your company, using optional RSMeans-powered Material Demand Why CMD?

CMD is the only data provider with the combination of true national U.S. coverage and the strongest Canadian coverage available. CMD also is the only strategic partner of the AIA, which means more private projects are tracked from the earliest source of information: owners and architects. CMD fully digitizes all documents, including plans and specs, giving you access to product need much earlier in the project cycle. From dedicated source spe-

Unmatched Insight to Opportunity

Intelligent Leads with Material Demand is an entirely new way to bring relevant projects into focus. For the first time ever, you can prioritize your project leads and gain a vantage point of projects with the most potential for your business. Only Material Demand combines the power of RSMeans cost models with active, detailed project information to show you the value of your materials on a project very early in the life cycle – even before specifications are written. You see the overall project value, as well as the estimated value of your products needed on the project. A clear view of future project demand and unmatched insight into your company’s best opportunities give you a unique perspective — the perspective you need to plan and execute strategies more effectively

Glenn Sipe Passes Away at Age 94 Glenn Woodrow Sipe, 94, passed away Sept. 25 at Catawba Valley Medical Center in Hickory, N.C. Glenn was born Aug. 15, 1920, to the late Homer Eugene Sipe and Adelia Turner Sipe of Catawba County. Born during The Depression, Glenn was the oldest child of six. He understood hard work and was a pioneer in many areas. Starting out in a oneroom school next to St. James church in Newton, he later attended Balls Creek School. He was a proud Marine serving during WWII. Glenn had worshiped since 1939 at Mt. Zion Glenn Woodrow Sipe Lutheran Church. He later started Glenn W. Sipe & Sons Inc. in 1965. He was one of the founding members and first president of the NC Masonry Contractors Association. In 2012, he was honored as one of only four contractors in North America to be inducted into the MCAA Masonry Hall of Fame. That same year, he was honored by the NCMCA with an award named for him, the Glenn W. Sipe Presidential Service Award. Glenn was an avid sportsman and lifetime member of the NRA. He was the last surviving charter member of the Catawba Valley Rifle and Pistol Club. He had been taught the value of hard work and respect, and came from a Great Generation. ❙MAS

November 2014

M A S O NRY

IN D U S T RY N E W S

than ever. Learn more and sign up at www.masoncontractors.org/cmd.

PROSOCO Adds Consolideck Support Staff in the Eastern U.S. To better serve Consolideck customers across the U.S., PROSOCO has hired two new field support personnel. Paul Smallwood has joined PROSOCO as a concrete flooring group Paul Smallwood specialist. From his home base of Greer, S.C., he’ll provide product training and technical support to customers in the Southeast and MidAtlantic regions, including Maryland, the District of Columbia, Virginia, North Carolina, South Carolina, Georgia, Alabama, Florida, and eastern and central Tennessee. Pat Sullivan has joined PROSOCO as a concrete flooring group specialist, serving customers in New England and eastern Canada. From his home base in Manchester, N.H., Sullivan Pat Sullivan will provide support for New York, Maine, New Hampshire, Rhode Island, Massachusetts, Connecticut, Vermont, New Jersey, Pennsylvania, Delaware, Ontario, Quebec, Newfoundland, New Brunswick and Nova Scotia.

ExakTime Named to Inc. 500|5000 Fastest-Growing Companies List For the fifth time, ExakTime has been named on the Inc. 500|5000 list of the fastest growing companies. ExakTime earned its ranking in the Inc. 5000 list by posting a three-year growth rate of 61 percent from 2010 to 2013, and by growing its workforce in that time by more than 40 percent. Pappas cited strong performance in the construction market and ongoing enhancement of the ExakTime Mobile app as spurring recent growth for the business, as well as significant expansion in the time and attendance company’s enterprise and small business segments. 54

MASONRY

The ExakTime Mobile solution now supports Android and iOS/Apple tablets, in addition to mobile phones. The new TeamView module gives foremen and supervisors an easy way to view their workers on an interactive map, anywhere in the world, with live updates as workers clock in and out. “It’s simply amazing to watch a foreman’s eyes light up when they can see where every employee is on a given work day,” said Pappas. “Replacing paper is often a hard decision for a business, but it’s gratifying to hear our clients’ success stories.”

Pettibone Names Jenkins as President The Pettibone - Heavy Equipment Group, a manufacturer of heavy equipment for the oil and gas, forestry, recycling and construction industries, has named Scot Jenkins as president. Jenkins joined Pettibone in May 2014 and served as VP of international sales until his appointment to president. He brings with him more than 22 years of experience in heavy equipment and has held a broad range of general management, sales and marketing roles for manufactures and dealers worldwide.

Roehrig Joins the BSI Board of Directors Peter Roehrig, director of sales and marketing for Eden Stone Co. Inc. and its cut stone division, Valders Stone and Marble Inc., will serve on the board of the Building Stone Institute (BSI), a notfor-profit trade association that provides educational materials and continuing education on the uses and benefits of natural stone. His term started this year. Eden and Valders Stone have long been members of the association that represents cut stone quarries and fabricators in North America. Since 1919, the BSI has worked on behalf of the quarries, fabricators, retailers, importers, exporters, carvers, sculptors, restorers, designers and installers that comprise our diverse membership. BSI provides programs and services that empower our member companies to offer the highest level of quality products and services. BSI resources are necessary tools that enable our members to educate the archi-

November 2014 • www.masoncontractors.org

tectural and design communities on the benefits and uses of natural stone.

NAWIC installs 2014-2015 national president and new board members The National Association of Women in Construction (NAWIC) installed Sandy K. Field, CBT, CIT, as its 60th national president during NAWIC’s Annual Meeting and Convention in Indianapolis on Sept. 5. Field, office/HR manager for Horizon Group International, has been a member of NAWIC’s Houston, Texas, Chapter since 2005. “I am looking forward to next year as NAWIC navigates through some exciting changes, one being the redistricting of our regions,” said Field. “The redistricting brings with it unlimited possibilities for NAWIC and its members. “However, as with any change, it must be properly managed to enjoy a smooth, productive and effective transition,” Field added. “As president, it will be my responsibility to see that the transition is carried out smoothly and in a manner that is most beneficial to the association as a whole.” Field plans to spend her year in office working to increase the value of a NAWIC membership. Also during her tenure, Field plans to promote NAWIC’s mentoring programs. NAWIC also installed officers president-elect Riki F. Lovejoy, CBT, CIT, Greater Orlando, Fla. Chapter; VP Connie M. Leipard, CIT, Central Missouri Chapter; treasurer, Stephanie K. Crane, CIT, Greater Birmingham, Ala. Chapter; secretary Amy Berg, CBT, CIT, Fargo-Moorhead, N.D. Chapter; and immediate pastpresident Yasmine A. Branden, CCA, Portland, Ore. Chapter. New directors installed include Midwest Region (6) Director Debbie Speake, Southwest Missouri Chapter; North Central Region (4) Director Anne Pfleger, CIT, Lima, Ohio Area Chapter; Northeast Region (14) Director Catherine D. Schoenenberger, Granite State Chapter (New Hampshire): Pacific Northwest Region (10) Director Rachel Stroup, Santa Clara, Calif. Chapter; Pacific Southwest Region Director Lorelee Langworthy, CBT, CDS, CIT, San Diego, Calif. Chapter; and Southeast Region (2) Director Anne Welch, CIT, Montgomery, Ala. Chapter. The Voice of the Masonry Industry

V, U S A

S, N EG A

SV LA t

NT CE

3-6

, 201

LAS -6 t 5 t S 2 Y R E M I N A RS : F E B R U A

S GA

N VE

Come to World of Concrete, roll up your sleeves and try your hand at the year’s newest products, equipment and services. Technology, training, resources and ideas—zoom in at the industry’s only annual international event designed specifically for commercial concrete and masonry professionals.

www.worldofconcrete.com A selected participant in the International Buyer Program

Source Code: MM

IN D U S T RY N E W S

Lafarge Cement Products Used on Wickford Junction Rail Station Better overall performance, an aesthetically pleasing finished appearance and enhanced sustainability are among the hallmarks of three types of Lafarge North America cement used in the construction of the Wickford Junction Commuter Rail Station in North Kingston, R.I. Lafarge Type III cement was used in the station’s 662 precast concrete elements, including columns, stairs and wall panels. Its design flexibility and efficient erection properties help reduce long-term maintenance needs. For the cast-in-place concrete foundation and slabs, Lafarge Type II cement and NewCem slag cement provide enhanced durability and reflectivity. NewCem is also notable for its environmental benefits. It makes use of an industrial by-product material that might otherwise end up in landfills, and avoids the use of virgin raw materials. The resulting lighter-colored, high-performance concrete mix also absorbs less heat from solar radiation, giving it an extended service life and lower life cycle costs. The more than 250,000-square-foot multimodal commuter rail station includes a parking garage, public lobbies and a café, and features a distinctive “millwork building” façade that is reminiscent of early-20th century New England textile mills. Functionally, it is an important component of extending Northeast Corridor rail service. The station has helped extend commuter rail service from southern Rhode Island to Warwick, Providence, Boston and beyond, and relieved traffic congestion along the Route 4/I-95 corridor. Wickford Junction Commuter Rail Station has received the 2012 Infrastructure Project of the Year Award from the Construction Management Association of America, and the Best Use of Innovation Award from the American Association of State Highway and Transportation Officials. ❙MAS

New Members The Mason Contractors Association of America (MCAA) is proud to welcome the following new members to the Association. The MCAA would like to thank them for joining their fellow mason contractors nationwide in helping to build a strong and successful masonry industry.

for November 2014 Bullseye Masonry, LLC Ponchatoula, LA 504-914-1233 Contractor Member

Buxton Masonry, Inc. Ogden, UT 801-627-9999 www.buxtonmasonry.com Contractor Member

CKS Masonry & Concrete, Inc. Oviedo, FL 407-366-6229 cksmasonryconcrete.com Contractor Member

Marriott Construction Waukesha, WI 262-549-5522 Contractor Member

MDM Scaffolding Grapevine, TX 817-329-4994 Regional Associate Member

S & D Masonry Algonquin, IL 847-287-2674 Contractor Member

Husqvarna New Sales Managers Jason Lavrinc joined Husqvarna Construction Products as a district manager for distribution sales Pennsylvania and West Virginia. Lavrinc has general construction experience, and for the last 10 years serviced and sold insurance in the Pittsburgh area. Lee Watson joined Husqvarna Construction Products as a district manager for distribution sales - south, territory of Virginia and Washington, D.C.

Jason Lavrinc

Lee Watson

MASONRY

Watson has worked in the distribution side selling construction materials and equipment for the last 15-plus years. He worked his way through this business in inside sales, account management, branch management, and sales management for regional and national construction material firms.

Acme Tools Opens Distribution Center in North Dakota Acme Tools, an authorized online retailer of tools and equipment, has opened a new distribution center in Grand Forks, N.D., in support of its growing internet sales division. Acme Tools built the new 40,000square-foot facility on a nine-acre site in the Grand Forks Business Park located adjacent to and west of Interstate 29.

November 2014 • www.masoncontractors.org

Team Masonry & Construction Scarborough, ME 207-510-1833 teammasonryandconstruction.com Contractor Member

Discover the many benefits your company is missing by not becoming a member of the MCAA. Call 800-536-2225 or visit www.masoncontractors.org/join to join the MCAA today. Together, we are stronger.

Acme Tools was the first company to purchase land in the business park. Designed to optimize the fulfillment process, the new distribution center opened with 20 Acme Tools employees and employment is projected to double in five years. The Grand Forks Business Park location also provides for future expansion to accommodate additional growth. ❙MAS The Voice of the Masonry Industry

A D V E R T O R I A L

CONTRACTOR TIP OF THE

MONTH BY DAMIAN LANG

You Make the Call Have you ever listened to fans cheering for their team at a sports event? Take a basketball game. Make it high school with a family member or friend playing out on the court. With emotions running high, fans scream objections, even accusations at the referee for every call that doesn’t go their way, putting tremendous pressure on her. An inexperienced referee (or a poor one) may be influenced by what the people in the stands are yelling, cave and allow it to lead to bad decision making. On the contrary, a good referee makes herself oblivious to her surroundings. She doesn’t hear what people yell or say. She doesn’t see white or red jerseys, she only sees what happened, and makes the call based on what she saw. In the business world, a manager makes decisions every day. If she makes decisions based on what people are saying behind the scenes, instead of what she observes on the job, she will become weak, and a poor manager. If she makes decisions to improve things, based on what she sees happening everyday on the job, while ignoring reactive grumbling, she will become wildly successful in the end. Recently we made a big call at our manufacturing company, by installing a software tracking system. Our purpose is to find out how we do financially on every single product we build. Eventually, we will raise prices on low margin products, or cut them from our line. Then, we will focus our attention on building and selling the most profitable products. Our team members work on up to 30 different parts of separate products on any given day. So, measuring the cost to build each machine or shop job by recording every aspect of what one is doing each shift certainly is not something anyone is crazy about doing.

Watch Closely. Observe the Situation. Then, “You Make the Call.” One of the managers who is leading the new software implementation called a meeting recently with me and our CFO, plant manager and engineer to discuss some issues the co-workers are having with the project. He said, “I think I have a solution to help drive the new system we are installing. It could take some stress off everyone up here. I have a friend who has a great attitude, is an expert in computers, and can assist our team in fixing the issues.” “Fantastic,” I replied. “Wait a minute,” he says. “I also have a deep concern. I am new here, and I know other staff members are already wondering why you hired me in the first place. If I bring in a friend, what will they say next?” I told him we have a vision, a direction in which we want to take the company, and that he is here to help us get there. We can’t be affected with raised eyebrows, balking or objections of the rest of the staff. We made the software implementation based on careful observation. As long as his friend could help us accomplish our long-term vision, hire her now. In fact, if all your friends can come on board, and help us reach our goals, bring

them on as we will take them all. I gave the thumbs up signal as we all laughed. Referees do make bad calls. Games are lost. Even the best referee or manager will make a mistake. It happens. However, if you stay focused and make decisions based on what you see is best for your company, ignoring the self-interest, chattering and objections of those around you, you will benefit your company greatly. Others will notice this and allow you to grow to heights you never thought were possible. In return, the company will reach unknown heights as well. Watch closely. Observe the situation. And then, “You Make the Call!” Damian Lang owns and operates four companies in Ohio. He is the inventor of the Grout Hog-Grout Delivery System, Mud Hog mortar mixers, Hog Leg wall-bracing system and several other labor-saving devices used in the masonry industry. He is the author of the book called “RACE—Rewarding And Challenging Employees for Profits in Masonry.” He writes for Masonry Magazine each month and consults with many of the leading mason contractors in the country.

www.masonrymagazine.com

November 2014

M A S O NRY

Education Calendar The following is the MCAA’s education calendar: November 3 Free Dow Webinar

November 19 Same-Sex Harassment

ONLINE Discipline: Masonry Products

ONLINE Discipline: Ethics & Business Practices

Credits: 1

February 2 Construction Boot Camp for Field Leaders—Four Corners of Field Leadership Excellence Location: Las Vegas, Nev. Discipline: Ethics & Business Practices Credits: 8

November 5 Marketing Checklist for the Mason Contractor ONLINE Discipline: Ethics & Business Practices Credits: 1

November 21 Overview of Masonry Special Inspection, Codes and Standards (NCMCA Mod 7) Location: Greensboro, N.C. Discipline: Codes & Standards

February 2 Employee Problems—Not on My Watch Location: Las Vegas, Nev. Discipline: Ethics & Business Practices Credits: 1.5

Credits: 6

November 12 Masonry Inspection & Testing ONLINE Discipline: Codes & Standards Credits: 1.5

November 14 Job Site Scheduling Location: Phoenix, Ariz. Discipline: Quality Assurance Best Practices Credits: 3

November 26 Building Information Modeling for Masonry (BIM-M): November 2014 Update

Location: Las Vegas, Nev. Discipline: Bidding Practices Credits: 3

ONLINE Discipline: General Credits: 1

December 3 Methods of Improving Stone Masonry Cavity Wall Construction ONLINE Discipline: Masonry Products

November 14 Masonry Robotics

February 2 Essential Parts to a Successful Estimating System

February 2 Field Issues in Residential Brick Veneer: How to Avoid Common Problems Location: Las Vegas, Nev. Discipline: Masonry Products Credits: 1.5

Credits: 1

Location: Phoenix, Ariz. Discipline: General Credits: 1.5

November 14 Masonry Wall Bracing Seminar

December 10 Efflorescence Causes and Solutions

February 2 From the Field to the Bid Room— How to Compete with Large Scale Projects

ONLINE Discipline: General

Location: Las Vegas, Nev. Discipline: Bidding Practices

Credits: 1

Credits: 1.5

December 17 Masonry Repair and Restoration Techniques

February 2 Leadership and Management: Be Successful by Knowing the Difference

Location: Phoenix, Ariz. Discipline: Safety Credits: 4

November 14 Productivity with Mobile Devices Location: Phoenix, Ariz. Discipline: General

ONLINE Discipline: Masonry Products Credits: 3

Location: Las Vegas, Nev. Discipline: Ethics & Business Practices Credits: 1.5

Credits: 1.5

February 1-2 Masonry Foreman Development Course

November 14 Silica Update Location: Phoenix, Ariz. Discipline: Safety

Location: Las Vegas, Nev. Discipline: Ethics & Business Practices Credits: 16

Credits: 1.5

Online classes available at: www.masoncontractors.org/live For more information and to view a complete list of all upcoming education, please visit www.masoncontractors.org/education

MASONRY

November 2014 • www.masoncontractors.org

The Voice of the Masonry Industry

I n d e x 26

t o

A IRPLACO E QUIPMENT

A d ver tisers 55

888.349.2950 www.airplaco.com

A MERIMX

A RRISCRAFT I NTERNATIONAL, I NC.

19 888.697.5585 www.kennisonforest.com

C4 3

11 17

877.786.6383 www.PaverArmorPro.com

T HE Q UIKRETE C OMPANIES 800.282.5828 www.quikrete.com

K RANDO M ETAL P RODUCTS, I NC. 610.543.4311 www.krando.com

D UPONT S URFACE P ROTECTION S OLUTIONS

Q UIKPOINT, I NC. 800.368.2292 www.quikpoint.com

K ENNISON F OREST P RODUCTS

CS U NITEC, I NC.

PR D IAMOND P RODUCTS 800.445.1697 www.prdiamond.com

IQ P OWER T OOLS 888.274.7744 www.iQpowertools.com

P ETTIBONE M ICHIGAN 800.467.3884 www.gopettibone.com

H YDRO-M OBILE

C ROM E QUIPMENT R ENTALS

PAVM OR 413.743.2064 www.paverplacer.com

800.700.5919 www.csunitec.com/

888.484.9376 www.hydro-mobile.com

N ON-S TOP S CAFFOLDING 800.845.0845 www.nonstopscaffolding.com

23 C2

C HEMG ROUT, I NC.

866.454.2766 www.cromequipment.com

H USQVARNA C ONSTRUCTION P RODUCTS

B ENNU PARTS & S ERVICE

708.354.7112 www.chemgrout.com

7, 9

800.288.5040 www.husqvarnacp.com

847.595.5444 www.bennuparts.com

H OLCIM I NC.

M ORTAR N ET S OLUTIONS 800.664.6638 www.mortarnet.com

888.646.5246 www.holcim.us

800.265.8123 www.arriscraft.com

866.962.7469 www.WorldofConcrete.com

888.313.0755 www.amerimix.com

H ANLEY-WOOD

S CAFFOLD M ART 252.756.3862 www.scaffoldmart.com

L ATICRETE I NTERNATIONAL, I NC. 800.243.4788 www.laticrete.com/mvis

30-31 SPEC MIX, I NC. 33

EDCO - E QUIPMENT D EVELOPMENT C O.

800.638.3326 www.edcoinc.com

888.773.2649 www.specmix.com

M AKITA USA 800.4.MAKITA www.makitatools.com

5 34

E RMATOR USA

T EJAS T EXTURED S TONE/V ENEER S TONE 866.578.5616 www.veneerstone.biz

2, 59 MCAA

855.736.2869 www.ermatorusa.com

800.536.2225 www.masoncontractors.org

39 13, 57

EZ G ROUT / G ROUT H OG

G ROUT G RUNT

800.417.9272 www.ezgrout.com

800.365.9663 www.mccausey.com

40 27

877.266.6432 www.groutgrunt.com

T RADESMEN’ S S OFTWARE 800.494.6922 www.tradesmens.com

M CC AUSEY S PECIALTY P RODUCTS

T ROW & H OLDEN 800.451.4349 www.trowandholden.com

M ISSISSIPPI VALLEY S TIHL 800.447.2429 www.mvstihl.com

W IREBOND 800.849.6722 www.wirebond.com

Reserve your Product in Masonry’s Showcase Today! Contact: Marvin Diamond Phone: 770.431.0867, ext.208, or 888.303.5639 FAX: 770.432.6969 E-mail: marvin@lionhrtpub.com

MASONRY

GET

FREEINFORMATION

FROM THESE ADVERTISERS NOW.

You’re busy, but you need to find out about this product. We’ve made it fast, easy and convenient to request FREE information about any product or service in this issue. To request information online, go to: www.masonrymagazine.com. Click on ‘FREE Product Information’ (Right top corner) then… 1. Select the issue of the magazine you are reading 2. Check the box next to the advertiser you are interested in 3. Provide your name, address and business information, and click submit.

Not close to your computer? Request information by phone. Dial toll free 888-303-5639, Ext.230. Follow the voice guidelines to request FREE information. In a hurry, and you don’t want to wait? We have provided the advertiser’s website and phone # for your convenience. You can call direct for information on the products and services you have been reading about in this issue. Don’t forget to tell them you saw their ad in MASONRY Magazine.

November 2014 • www.masoncontractors.org

The Voice of the Masonry Industry

DESIGNED BY PROS. USED BY PROS. AmerimixÂŽ. The CLEAR choice for mortars, grouts and stucco. Consistency. Labor reduction. Enhanced productivity. ASTM specifications pretesting. Reduced waste and risk. These are the dynamic benefits that make preblended Amerimix products the choice of professionals everywhere. Our experienced sales, customer service and technical support teams are ready to help you select the right Amerimix product for your high-volume application. Visit Amerimix.com or call 888-313-0755.

AmerimixÂŽ is a registered trademark of Bonsal American, Inc., an Oldcastle Company.