Masonry Design Spring 2016 by Lionheart Publishing Inc.

Spring 2016 • Vol. 7, No. 1

Materials • Technology • Trends

A CALMING PRESENCE Michielli + Wyetzner’s design for a NYC clinic p14

FAITH IN MASONRY: Kenrick-Glennon Seminary renovation project wins awards p26

SUPPLIES: The latest in brick, block, & stone p36

The Complete Solution for Thin Brick

Snap for more information.

Masonry Veneer Installation System (MVIS™) LATICRETE has a complete solution for adhered manufactured thin brick veneers, providing a permanent, high strength installation that is freeze thaw stable and protects from water intrusion – backed by a LATICRETE® 25 Year System Warranty*. www.laticrete.com/mvis | 1.800.243.4788 A-6171-0416 *See Data Sheet 025.0 for complete warranty information. ©2016 LATICRETE International, Inc. All trademarks shown are the intellectual properties of their respective owners.

years of building chemistry

Products & Relationships

quality IT’S WHAT BONDS GREAT PRODUCTS GREAT PROJECTS.

Amerimix offers a full line of Preblended Mortars, Stuccos and Grouts. We work alongside the craftsman to develop innovative products with an unwavering focus on consistency and durability. Amerimix products are engineered to perform, backed by proven results and designed to empower you to build better.

AMERIMIX.COM

IT’S THE WAY YOU BUILD.

volume 7 | number 1

Spring2016 |contents

f e at u r e s 14 Design Trends / Healthcare

New York Hospital Queens Astoria Primary Care Clinic

The design of most hospitals and other healthcare facilities often can look and feel cold or uninspired, but they don’t have to be. A more inviting design can lead to a clinic that becomes part of a community rather than derided. Let’s face it: No one wants to go to the doctor, but when you need to, an aesthetically pleasing building (often referred to as patient-centered design) can improve outcomes. By Cory Sekine-Pettite

Design Trends / Restoration

Faith In Masonry

The most visible landmark in the town of Shrewsbury, Mo., is the distinctive brick bell tower of the Kenrick-Glennon Seminary. A glimpse of it hints at the beauty of the masonry buildings on the Seminary campus. These structures look like they were transported to their hilltop location from a town in Tuscany. Erected in 1931, the current Seminary campus has been the center for the education of young men entering the Catholic priesthood for 85 years. Masonry not only played a major role in the construction of the original Seminary complex, but also in the renovations and upgrades.

2 |

Masonr yDesign

Spring 2016

Materials • Technolog y • Trends

www.masonr ydesignmagazine.com LIONHEART PUBLISHING, INC. 506 Roswell Street, Suite 220, Marietta, GA 30060 Tel: 770.431.0867 Fax: 770.432.6969 E-mail: lpi@lionhrtpub.com www.masonrydesignmagazine.com Publisher John Llewellyn llewellyn@lionhrtpub.com Editor Cory Sekine-Pettite cory@lionhrtpub.com Art Director Alan Brubaker albrubaker@lionhrtpub.com Online Projects Manager Patton McGinley patton@lionhrtpub.com Assistant Online Projects Leslie Proctor Manager leslie@lionhrtpub.com Advertising Sales Marvin Diamond marvin@lionhrtpub.com Advertising Sales John Davis jdavis@masonrydesignmagazine.com Reprints & Subscriptions Kelly Millwood kelly@lionhrtpub.com

The editorial mission of Masonry Design is to educate and inform architects, engineers and specifiers about the vital role that masonry plays in the construction markets in the United States and Canada, as well as to promote masonry and masonry systems in building design (commercial, residential, institutional and educational), interior design and hardscaping applications. With each issue, readers will become better informed of the design trends, latest materials and newest technologies that will aid them in creating better masonry projects.

On the cover: New York Hospital Queens Astoria Primary Care Clinic designed by Michielli + Wyetzner Architects. Located in Astoria, on a corner site along the busy thoroughfare of 30th Avenue, the distinctive design is intended to give this satellite facility a powerful presence in the neighborhood.

Photo © Michielli + Wyetzner Architects

co l u mns & d epa r t me n t s 4 6 36 37

From the Editor Industry News Supplies Index to Advertisers

w w w.masonr ydesignmaga zine.com

Masonry Design (ISSN 1941-0975) is published quarterly by Lionheart Publishing, Inc.

Subscription Rates – For a free subscription to Masonry Design and Masonry Design eNews, sign up at: www.masonrydesignmagazine.com Click on Subscribe

Copyright © 2016 by Lionheart Publishing, Inc. All rights reserved. The copyright owner, however, does consent to a single copy of an article being made for personal use. Otherwise, except under circumstances within “fair use” as defined by copyright law, no part of this publication may be reproduced, displayed or transmitted in any form or by any means, electronic or mechanical, including photocopying or by any information storage and retrieval system, without the prior written permission of the copyright owner, Lionheart Publishing, Inc. Send e-mail permission requests to cory@lionhrtpub.com.

Disclaimer – The statements and opinions in the articles of this publication are solely those of the individual authors and contributors and do not necessarily reflect the opinions of Lionheart Publishing, Inc. or the editorial staff of Masonry Design or any sponsoring organization. The appearance of advertisements in this magazine is not a warranty, endorsement, or approval of the products or services advertised.

Spring 2016

Masonr yDesign

| 3

from the editor

What Is Your Favorite Business Tool?

Cory Sekine-Pettite, editor To make comments or suggestions, send e-mail to cory@lionhrtpub.com.

Recently, I was asked: “ What is your favorite business tool?” I didn’t have a quick answer, and I’ve been thinking about it ever since. Of course, I like my laptop and smartphone; I use one or the other for most hours of the day. But is either of them my “ favorite?” Not really. I don’t collect MacBooks or iPhones, after all. So what did I depend on most to get my job done? And did I have some level of affection for it beyond its basic purpose? I started looking through my briefcase and around my desk when I realized that I really like notebooks. I have many, and I use them when conducting the most vital part of my job—interviewing. Yes, I still take handwritten notes—lots of them. And yes, I still prepare for interviews by writing down the questions I want to ask. Both tasks help me to organize my thoughts and better remember what it is I want to accomplish. Research proves that people who use longhand remember more and have a deeper understanding of their work. So I’m not alone; my old-fashioned approach works. My notebooks of choice come from a German company called Leuchtturm 1917. Their hardcover pocket-sized and medium notebooks are both durable and easy to pack for business trips. They are sold in a multitude of colors, though black is my preferred choice

Follow our Blog: http://masonrydesignblog.wordpress.com/

Find us on Facebook:

as it looks the most professional. I make sure to take one everywhere I go, since most of my business trips involve interviewing people— often at trade shows. And I keep at least one Leuchtturm notebook handy at the office for telephone interviews and general note-taking required of most editors. Could I live without these notebooks? Could I do my job with something else? Of course I could, but that’s the point. I have many options when it comes to notebooks— from cheap multi-packs of legal pads to the spiral-bound notebooks of school days—but I choose the Leuchtturms because they please me. The cover protects the pages. The elastic band on the back keeps the notebook closed. The built-in pocket at the back provides convenient storage. And the included label stickers allow for reliable organization once the notebook is filled. What’s not to love? Give them a try! And let me know what your favorite business tools are. wMD

highlights coming in

summer ‘16

• Commercial Design • Thin Stone/Brick • Moisture Control

www.facebook.com/MasonryDesign

Masonr yDesign

Spring 2016

Materials • Technolog y • Trends

THE MASONRY REVOLUTION STARTS HERE

Whatever your vision, you can see it through with Echelon, your single-source masonry solution. As the consolidated brand of masonry products from Oldcastle Architectural, we are advancing a new generation of building products and services. You can integrate the best of both worlds into your projects â&#x20AC;&#x201D; the irreplaceable character of masonry along with reliable performance that delivers for years to come.

Discover the next generation of masonry.

EchelonMasonry.com

M A SON R Y PR ODUCTS F R OM

Industry News

Construction Employment Increases in 244 out of 358 Metro Areas According to an analysis of federal employment data released by the Associated General Contractors of America, construction employment increased in 244 out of 358 metro areas, was unchanged in 44, and declined in 70 between March 2015 and March 2016. AGC of America officials said the new figures show that the construction sector continues to recover in most parts of the country from its years-long downturn. “With more than two-thirds of the nation’s metro areas adding construction jobs, it is clear that the demand for construction is broad-based geographically and by project type,” said Ken Simonson, the association’s chief economist, adding that construction employment hit new peak levels in 31 metro areas. “The main soft patch for the construction industry remains the parts of the country most likely to be affected by declining energy prices.” Anaheim-Santa Ana-Irvine, Calif. added the most construction jobs during the past year (11,900 jobs, 14 percent). Other metro areas adding a large number of construction jobs include New York City (9,000 jobs, 7 percent); Atlanta-Sandy Springs-Roswell, Ga. (8,500 jobs, 8 percent); and Orlando-Kissimmee-Sanford, Fla. (8,300 jobs, 14 percent). The largest percentage gains occurred in El Centro, Calif. (45 percent, 1,000 jobs); Monroe, Mich. (36 percent, 800 jobs) and Haverhill-Newburyport-Amesbury Town, Mass.-N.H. (28 percent, 1,000 jobs).

6 |

Masonr yDesign

Spring 2016

The largest job losses from March 2015 to March 2016 were in Odessa, Texas (-2,700 jobs, -14 percent), followed by Fort Worth-Arlington, Texas (-2,600 jobs, -4 percent); Cleveland-Elyria, Ohio (-2,500 jobs, -8 percent) and Midland, Texas (-2,200 jobs, -8 percent). The largest percentage declines for the past year were in Bloomington, Ill. (-15 percent, -400 jobs); Odessa; Grants Pass, Ore. (-13 percent, -100 jobs); Decatur, Ill. (-13 percent, -400 jobs) and Laredo, Texas (-13 percent, -600 jobs). The new employment figures are encouraging, but AGC of America officials cautioned that workforce shortages are likely to grow as the industry continues to expand. The association’s annual Outlook survey shows that 70 percent of firms are already having a hard time finding qualified workers. Those shortages will only get more severe considering the lack of secondary-level programs to recruit and prepare future construction workers, they added. “As firms add to their backlog of pending projects, the backlog of available workers continues to shrink,” said Stephen E. Sandherr, the association’s CEO. “It is time to start sending signals to students that there are multiple paths to success in life, and while college and office jobs are one path, high-paying careers in construction offer another, equally viable option.” More information is available on AGC of America’s website. wMD

Materials • Technolog y • Trends

USGBC Has Made Significant Change to LEED 2009 The U.S. Green Building Council (USGBC) has announced that all new projects registering for LEED 2009 beginning on Apr. 8, 2016, will need to satisfy increased minimum energy performance thresholds. USGBC reported the results of the balloting with 78.6 percent of the consensus body voting in favor of this change to the 7-year-old rating system. With this change, projects must now earn a minimum of four points in the Energy Performance credits. The referenced energy standard and modeling requirements in LEED 2009 will not change; buildings falling under the proposed change can use the same methodologies and referenced standards, but will need to earn additional points to achieve certification. This change is significant both in that it will no doubt increase first costs of most LEED projects when those projects will have to satisfy increased minimum energy performance thresholds, and in that it is a change to a longstanding approved rating system that is the benchmark in green building laws, construction contracts, and more. Recall that Rick Fedrizzi, retiring USGBC CEO, announced on Oct. 29, 2014 that users would be able to register projects under the LEED 2009 rating system until Oct. 31, 2016. That extension was occasioned by the delay in LEED v4. Thus, this change will apply to LEED 2009 projects registering between Apr. 8, 2016 and Oct. 31, 2016 (the last day to register a project under LEED 2009). Today, the Minimum Energy Performance prerequisite, using Option 1, Whole Building Energy Simulation, requires that the applicant, Demonstrate a 10% improvement in the proposed building performance rating for new buildings, or a 5% improvement in the proposed building performance rating for major renovations to existing buildings, compared with the baseline building performance rating. The changed credit language is, For projects that register after 04/07/16 and are subject to the four point mandatory minimum, demonstrate an 18% improvement in the proposed building performance rating for new buildings, or a 14% improvement in the proposed building performance rating for major renovations to existing buildings, compared with the baseline building performance rating.

As indicated, the referenced energy standard and modeling requirements do not change and still require the applicant to calculate the baseline building performance rating according to the building performance rating method in Appendix G of ANSI/ASHRAE/IESNA Standard 90.1-2007 (with errata but without addenda 25) using a computer simulation model for the whole building project. That is, this is not a move to the newer 2010 version of the ASHRAE 90.1 standard. You can read the specific changes in the Rating system document. Note, also new point thresholds are provided for different building types (e.g., health care) to align the effective percent increase in performance. Each of those is best identified in the Summary of changes. It is difficult to argue against increasing energy efficiency, but this change to LEED 2009 may have a destabilizing effect from changing a rating system midstream, with little advance notice, cutting against the certainty that the real estate industry craves (â&#x20AC;Ś even in this instance when the window will only be for those projects registered with GBCI through Oct. 31, 2016). Given that most building projects are budgeted, programmed, planned, and designed over a period of years, to propose a substantive change that will have significant first cost impact, to be effective in a matter of weeks, will reverberate throughout the building industry and, no doubt, expose participants to increased liability for this not programmed change. Additionally, projects attempting to comply with governmental mandates or contractual obligations for LEED certification may create jeopardy. You are urged to consider the impact this may have, and in particular will have on projects not yet registered, with the thought that all projects contemplating pursuing LEED 2009 should now be registered by Apr. 7, 2016, in advance of the effective date of the change. Everyone involved with LEED projects should promptly review their contracts to determine the implications from this change in LEED and additionally what amendments to contracts may be necessary and proper. wMD

Everyone involved with LEED projects should prom ptly review their contracts to determine the implications from this change. News, continued on p8

w w w.masonr ydesignmaga zine.com

Spring 2016

Masonr yDesign

| 7

Industry News News, continued from p7

Ball State Opens New Construction Management Center to Educate Next Generation Hunt Center will prepare construction management students for successful careers As the nation’s construction industry becomes more complex, with highly skilled managers in short supply, Ball State has created a center to prepare its students for the rapidly expanding field. The university recently dedicated the Robert G. Hunt Center for Construction Management during a ceremony within the recently renovated Applied Technology Building. The 2,500-squarefoot facility—a once-dimly lit midcentury space transformed into an office environment found at major construction management organizations—is designed to foster teamwork, said James Jones, a construction management professor. “Now more than ever, students must work collaboratively as part of highly complex teams,” Jones said. “Our students are learning the skills needed to become proficient managers who can guide multimillion-dollar projects from concept to completion on time and within budget. “This center will play a critical role as they learn how to work with professionals from various parts

of an organization to make sure that all needs are addressed,” he said. “Construction management is undergoing many changes based on team interaction. In fact, you can’t build anything bigger than a doghouse without a group of top-level professionals.” The facility’s primary use will be for the program’s capstone course, which focuses on students working in four-member teams on a construction project. Each team will have its own physical office space for the duration of the course. Students will have around-the-clock access to the center to work on assignments. Jones noted the facility’s layout is based on current collaborative spaces at Hunt Construction Group offices in Indianapolis and other cities across the nation. Honoring a leader in innovation The center’s name honors the program’s strongest supporters, Diane and Robert G. Hunt, ’69. He is a national leader in innovation and excellence in the construction industry.

Terry King (left), Ball State’s acting president, assists Diane and Robert G. Hunt with the unveiling of a plaque recognizing the couple’s support of the university and its construction management program.

8 |

Masonr yDesign

Spring 2016

Materials • Technolog y • Trends

Hunt has been an executive-in-residence for two immersive learning projects at Ball State: the first, in 2010, focused on redesigning a transportation hub in Venice, Italy; and the second, in 2012, had students evaluate Hunt Construction Group’s brand image and develop a strategic brand image management plan. He is the third generation in his family to head Hunt Construction Group as its chairman and chief executive officer. The nationally ranked construction firm regularly hires Ball State graduates and is widely recognized as the one of the country’s premier builders of sports facilities and convention centers. “There is a feeling of excitement for what this center will bring for future students—and obviously a sense of pride and humility in having been a part of a team that brought this to fruition,” said Hunt, speaking at the dedication ceremony where he and wife were named to the Wings of Beneficence Society for their contributions to the university. Jones noted that Hunt’s presence would be felt in the new center, with several multicolored light shades over a conference table representing his penchant for wearing bright ties. The shades were created by students at Ball State’s Marilyn K. Glick Center for Glass. “Mr. Hunt will always be with us in the building, overlooking our work,” Jones said. “We just have to look up.” Filling a need Employment for construction managers is projected to grow a total of 5 percent from 2014 to 2024, according to the U.S. Bureau of Labor Statistics. In addition to expected industry growth, there will be a growing need to fill vacancies due to baby boomers retiring. Ball State’s program had a 100-percent placement rate in 2015, with recent graduates starting at an average salary of $53,000. Ben Lamb, ’11, who spoke during the dedication ceremony, credits Ball State’s construction management program with providing a strong education and internship experiences that helped him get hired by Hunt Group shortly after graduation. He is a scheduling engineer for the firm’s project support center in Indianapolis. “The faculty at Ball State are among the best in the nation because of their construction industry News, continued on p10 w w w.masonr ydesignmaga zine.com

Spring 2016

Masonr yDesign

| 9

Industry News

News, continued from p9

backgrounds,” he said. “One of my profs told us, ‘All of us professors are here to give you the tools in your toolbox in order for you to go build whatever it is you desire to build.’” Lamb believes the new center will provide students with a space that is similar to a real-world scenario. Robert G. Hunt (right) speaks with Jennifer Bott, dean of the Miller College of Business, outside “When I was a student, I of the new center. would have thoroughly enjoyed this as a place to work together on group “In the last several weeks, we have had projects or even spend an evening doing homequite a few potential students and their parwork,” he said. ents walk through the facility, and they are immediately taken by it,” he said. “We think Center makes quite an impression that not only will the center improve the edThe new facility is being embraced by students ucational opportunities for our students, but and faculty and is catching the eye of campus visialso play a major role in recruiting in the comtors, Jones said. ing years.” wMD

Acme Brick Breaks Ground for New Springdale, Arkansas Office and Warehouse Recently, Acme Brick Company executives, including President and CEO Dennis Knautz, joined Springdale, Ark., Mayor Doug Sprouse and other officials to turn the first shovels of soil for Acme’s new showroom and warehouse. The 6,256 square-foot showroom and office, and 14,494 square-foot warehouse will sit on 5.78 acres. “This new facility is a demonstration of our

10 |

Masonr yDesign

Spring 2016

confidence in the growth potential for this dynamic region of Arkansas,” said Knautz. Acme established its first Northwest Arkansas sales presence about 40 years ago. Since then, its nine-county service area has tripled in population—from 186,000 in 1970 to well over half a million today. To keep pace with this growth, Acme has increased brick production and added a wide variety of products. As a result, the company has outgrown its current location. The new facility is scheduled for completion in early 2017. Acme Brick Company, founded in 1891, is the nation’s largest brickmaker. Acme owns 26 brick plants and has 69 company-owned sales offices across 14 states, plus a nationwide network of independent distributors. Other Acme operations include American Tile & Stone; Featherlite Building Products; Innovative Building Products; and Texas Quarries. For more information, visit www.brick.com. wMD Materials • Technolog y • Trends

Colorful thinBRIK provides new ways to use Acme Brick. TM

The beauty of Acme thinBRIK is that it offers the durable exterior of real brick with much less weight. This means that no extra foundation support is required which saves considerable time and expense. So, thinBRIK can be applied virtually anywhere, from an exisiting kitchen backsplash to the exterior of multistory buildings. In an existing structure, thinBRIK install quickly with little disruption to the occupantâ&#x20AC;&#x2122;s activities. Combined with a system of lightweight metal panels, brick are adhered with adhesive and then grouted with traditional mortar. The resulting look is identical to traditional brick.

Typically an interior application such as a contrasting wall can be installed in one or two days. In commercial applications thinBRIK greatly enhance the appeal of a buildingâ&#x20AC;&#x2122;s exterior facade at a competitive price. Commercial interior spaces can also be dramatically enhanced with the warmth of brick. Durable thinBRIK are produced in a broad color palette, at seven brick plants and are available nationwide. We also offer thin brick from other premier American brick manufacturers. For more information please visit www.brick.com or call us at 1-800-792-1234.

ONLY

F O R W I D E C AV I T Y C O N S T R U C T I O N 2X-HOOK Systems from Hohmann & Barnard BIA Technical Note 44B: “specify ties with maximum deflections of less than 0.05 in., or 1.2 mm, when tested at an axial load of 100 lbs. in tension or compression at maximum offset of 1¼ in. eccentricity”. HOHMANN & BARNARD HAS ENGINEERED & TESTED THE ONLY LINE OF ANCHORS THAT WILL SATISFY THIS CODE IN WIDE CAVITY CONDITIONS OF OVER 4½” AND/OR GREATER THAN 1¼” ECCENTRICITY. 1-1/4” EFFECTIVE ADJUSTABILITY

H&B compressed the legs of its standard 3/16” diameter 2X-HOOK, which tested at over 200 lbs. in tension or compression at 1¼” eccentricity and 0.05” deflection in cavities up to

2 -1/4” EFFECTIVE ADJUSTABILITY

7½” WIDE!

COMPRESSED VERTICAL LEGS

In addition to compressed legs, the ¼”ø MIGHTY-LOK™ Hook features a flattened & serrated front FLATTENED & SERRATED END edge for superior bonding with the mortar, maintaining strength at up to

2¼” eccentricity.

US Pat #’s: 6,279,283; 6,668,505; 8,613,175 Other Patents Pending

Use with HOHMANN & BARNARD Up to 7-1/2” wide cavity

adjustable joint reinforcement and adjustable brick veneer anchor systems! See all the options at:

www.h-b.com/mightyd1 or call 800.645.0616

Does YOUR brick veneer anchor

PASS THE TEST? NFPA 285: Standard fire test method for evaluation of fire propagation characteristics of exterior non-load-bearing wall assemblies containing combustible components.

or f e b

or bef

Aft

X FAIL

PASS

COMPETITOR’S PLASTIC WING:

HOHMANN & BARNARD’S STEEL REINFORCED WING:

When exposed to NFPA 285 testing conditions, plastic-only clip-on wings melt causing complete disengagement of the wire hook. Failure to maintain structural connection between veneer and back-up can possibly lead to catastrophic failure with the veneer falling off the building.

By using a steel core with UL94 plastic coating, the 2-SEAL™ THERMAL WING NUT ANCHOR stands up to NFPA 285 testing. This results in an anchor that will always maintain structural connection of the wire hook; satisfying industry-wide building code requirements for veneer anchors even in the most extreme conditions.

Test results from a modified NFPA 285 test prove that the only SAFE and effective choice for your wall system is the H&B Thermal Wing Nut Anchor.

WHEN PLANNING YOUR NEXT JOB, ASK: “DOES YOUR BRICK VENEER ANCHOR PASS THE TEST?”

U.S. Patents: 7,415,803 8,613,175 D702,544 D706,127

2-SEAL™ THERMAL WING NUT ANCHOR

For more information, visit:

www.h-b.com/ther mald1

DESIGN TRENDS | Healthcare Facilities

NEW YORK HOSPITAL QUEENS ASTORIA PRIMARY CARE CLINIC THIS SATELLITE FACILITY IS A POWERFUL PRESENCE IN ITS NEIGHBORHOOD.

By Cory Sekine-Pettite Images courtesy of Michielli + Wyetzner Architects

14 |

Masonr yDesign

Spring 2016

Materials • Technolog y • Trends

[PICTURED]

With the interior highly visible from the outside, the client wanted a bright and inviting space.

w w w.masonr ydesignmaga zine.com

Spring 2016

Masonr yDesign

| 15

DESIGN TRENDS | HEALTHCARE FACILITIES

[BELOW]

Waiting rooms on the first and second floor allow ample amounts of controlled natural light into the space.

16 |

Masonr yDesign

Spring 2016

THE DESIGN OF MOST HOSPITALS AND OTHER HEALTHCARE FACILITIES OFTEN CAN LOOK AND FEEL COLD OR UNINSPIRED, but they don’t have to be. Amore inviting design can lead to a clinic that becomes part of a community rather than derided. Let’s face it: No one wants to go to the doctor, but when you need to, an aesthetically pleasing building (often referred to as patient-centered design) can improve outcomes. One beautiful healthcare clinic that caught our eye recently, is New York Hospital Queens Astoria Primary Care Clinic designed by Michielli + Wyetzner Architects. The 5,000-square-foot facility is a satellite primary care clinic. This off-site primary care clinic—built between October 2013 and October 2014—is one in a series of new neighborhood practices intended to raise the profile of the New York Hospital Queens in the

Materials • Technolog y • Trends

Raise your...

EXPECTATIONS

TotalFlash, the completely engineered ®

masonry cavity wall flashing system (flashing membrane, drainage mat, weep tabs, termination bar and drip edge) is designed to be consistent—it works every time, all the time. Why spec pieces and parts when you can specify a proven, compatible system? Raise your expectations.

Call or email for samples: 800.664.6638 x509 • samples@mortarnet.com

mortarnet.com

DESIGN TRENDS | HEALTHCARE FACILITIES

[BELOW]

A bold color palette was chosen to give the clinic’s interior a strong identity. [RIGHT]

Distinct geometric volumes interact with each other at the reception desk and a new boldly colored enclosed stair volume provides a dramatic transition between floors.

18 |

Masonr yDesign

Spring 2016

surrounding community. Located in Astoria, on a corner site along the busy thoroughfare of 30th Avenue, the distinctive design is intended to give this satellite facility a powerful presence in the neighborhood. The clinic’s two floors consist of exam rooms, consultation rooms, waiting and reception, and support spaces. The exterior is painted exposed steel, perforated corrugated metal, glass, and brick. It was originally an existing one-story brick building to which the landlord added a second floor several years ago. “The second floor was clad in Tulip Blend brick. We added white perforated corrugated metal panels to the lower level to hide the old uneven brick and to highlight the second floor by making it appear to float above the ground floor,” said Michael Wyetzner, one of the firm’s founding partners. “The metal also masks the uneven pattern of existing windows, allowing sunlight in during the day emitting a soft glow in the evening. “We also combined the two windows on the front façade to create one long window and needed to remove the brick above the window and replace it,” Wyetzner continued. “We went to the brick yard to select brick we thought

Materials • Technolog y • Trends

w w w.masonr ydesignmaga zine.com

Spring 2016

Masonr yDesign

| 19

DESIGN TRENDS | HEALTHCARE FACILITIES would give a perfect match. We also added a new canopy at the entrance that becomes the ceiling plane on the interior.” During construction, the two-story brick building was completely gutted to accommodate new exam and consultation rooms. The main circulating corridor on both floors is located along the perimeter of the cross street to allow natural light to enter into the patient area. Waiting rooms on the first and second floor allow ample amounts of controlled natural light into the space. With the interior highly visible from the outside, the client wanted a bright and inviting space. Michielli + Wyetzner incorporated Sierra Shadowstone on the entry wall as part of the hospital’s “brand.” In addition, the firm used an illuminated

About the firm: [BELOW]

A new canopy at the clinic entrance becomes the ceiling plane on the interior.

Michielli + Wyetzner Architects, New York, was established in 2004. The firm works mainly in university, cultural, public, and healthcare facilities design. With just a small staff of nine, Michielli + Wyetzner has earned an impressive number of awards—at least 10—including an AIA National Healthcare Design Honor Award in 2015 for the New York Hospital Queens Astoria Primary Care Clinic.

Project Team: • MEP Engineer—ME Engineers • Structural Engineer—Engineering Group Associates • General Contractor—PM Construction

20 |

Masonr yDesign

Spring 2016

Materials • Technolog y • Trends

DESIGN TRENDS | HEALTHCARE FACILITIES

22 |

Masonr yDesign

Spring 2016

Materials • Technolog y • Trends

[LEFT]

The firm used an illuminated polycarbonate ceiling that calls attention to the building in the neighborhood. [ABOVE]

Michielli + Wyetzner incorporated Sierra Shadowstone on the entry wall as part of the hospital’s “brand.” polycarbonate ceiling that calls attention to the building in the neighborhood. And a bold color palette was chosen to give the clinic’s interior a strong identity. Distinct geometric volumes interact with each other at the reception desk and a new boldly colored enclosed stair volume provides a dramatic transition between floors and is visible from the street. In particular, Wyetzner said, he wanted to call attention to the new stairs, so they were painted blue on the outside and the inside. It is easy to see in the photos accompanying this article that the New York Hospital Queens Astoria Primary Care Clinic is not only a beautiful building, but an inviting space as well. The building itself can’t cure you of your ills, but it certainly can ease your anxiety as you make your way inside. wMD w w w.masonr ydesignmaga zine.com

Spring 2016

Masonr yDesign

| 23

S TA N DA R D C O L O R C H A N N E L K I T

T HE H E PERFECT P ERFE CT CO LO R ED MO RTAR F OR BRICK, BL OCK & STO N E For over 20 years the consistency and quality of SPEC MIX ® Colored Mortar has successfully met thousands of project specifications across North America. We’ve proven that coloring mortar accurately and consistently is only achieved by weighing and preblending all mortar constituents using precise batching systems. SPEC MIX Colored Mortar provides building owners and designers endless color options and consistency—EVERY TIME!

DESIGN TRENDS | Restoration & Rehab

FAITH IN MASONRY Kenrick-Glennon Seminary renovation project wins awards

26 |

Masonr yDesign

Spring 2016

Materials • Technolog y • Trends

THE MOST VISIBLE LANDMARK IN THE TOWN OF SHREWSBURY, MO., is the distinctive brick bell tower of the KenrickGlennon Seminary. A glimpse of it hints at the beauty of the masonry buildings on the Seminary campus. These structures look like they were transported to their hilltop location from a town in Tuscany. Erected in 1931, the current Seminary campus has been the center for the education of young men entering the Catholic priesthood for 85 years. The Seminary underwent a renovation from 2011-2012. This project won awards of merit from both the American Institute of Architects and the St. Louis Landmarks Association in 2013. Masonry not only played a major role in the construction of the original Seminary complex, but also in the renovations and upgrades. â&#x20AC;&#x153;Our use of masonry on this project was an obvious choice. The beauty and durability of that original building was tied to its own masonry construction. Using a well-matched brick to continue the buildingâ&#x20AC;&#x2122;s sense of timelessness and permanence, and have our addition feel equal in w w w.masonr ydesignmaga zine.com

[ABOVE]

Erected in 1931, the current Seminary campus has been the center for the education of young men entering the Catholic priesthood for 85 years.

All photos courtesy of the Masonry Institute of St. Louis.

Spring 2016

Masonr yDesign

| 27

DESIGN TRENDS | RESTORATION & REHAB

[ABOVE]

Great care was taken to select a blend of bricks for the new addition. [INSET]

The original construction in 1930 was completed by Fred Daues, Sr. of Daues Contracting Company. character—and yet part of the whole complex—was important to us,” said Brendan Smith, project architect for Cannon Design. The Seminary’s distinctive, original undergraduate building features a multi-wythe brick construction that uses up to six wythes of brick toward its base. Expansion plans on this project called for the construction of a new addition to fit in a space between two of the building’s wings. Cannon Design chose a cavity wall system using a CMU load-bearing wall with a brick veneer for this three-story addition. The intent was to blend in with the original building, but not mimic it. “Space was at a premium; the inches counted,” said Smith. “Using CMU as a back up to the face brick allowed us to use those exterior walls both for primary structural support and for shear. We got a cleaner layout and a better use of space than we would have if we had used perimeter steel framing.” The masonry bearing walls and flat concrete slab construction allowed the contractors to match the floor-to-floor heights of the original building while still allowing enough ceiling space for modern HVAC systems. The choice of brick on this addition was critical, as the original brick was no longer available. The

The choice of brick on this addition was critical, as the original brick was no longer available. 28 |

Masonr yDesign

Spring 2016

Materials • Technolog y • Trends

Build upon a lifetime of experience

Choose distinctive, high performance products from a trusted supplier with a proven track record:

IALS CO R

ION

COUNT

R AT

ER AT

Decorative Concrete Masonry Units Concrete & Clay Brick Natural Stone Concrete Thin Veneers Pavers and Slabs Retaining Walls

Years 19

46 - 2016

(800) 242-7733

www.countymaterials.com

Proud to be American based & American made

DESIGN TRENDS | RESTORATION & REHAB

[BELOW]

“Using a well-matched brick to continue the building’s sense of timelessness and permanence, and have our addition feel equal in character—and yet part of the whole complex—was important to us,” said Brendan Smith, project architect for Cannon Design.

design and construction team studied numerous options before settling on a blend of 67-percent Shadow-Tex and 33-percent Light Autumn brick (both from Midwest Block and Brick) that was blended at the plant. “Danielle Bach, architectural rep for Midwest Block and Brick, did a great job of finding the right brick for this project,” said Smith. “She really nailed it.” Brian Bell, project manager for general contractor BSI credits the masons from John J. Smith Masonry for their craftsmanship and dedication on this project. “Smith Masonry did multiple mock-ups to help us arrive at a match for the existing brick,” said Bell. “It was worth the effort to go the distance and get this match. It is remarkable that it is an almost seamless transition to an existing 80-year old wall.”

[INSET]

The original building is on the right, and the new building is on the left. [OPPOSITE PAGE]

The distinctive bell tower makes the seminary a highly visible landmark in Shrewsbury.

30 |

Masonr yDesign

Spring 2016

Materials • Technolog y • Trends

w w w.masonr ydesignmaga zine.com

Spring 2016

Masonr yDesign

| 31

DESIGN TRENDS | RESTORATION & REHAB

[BOTTOM OF PAGE]

A new ADA-compliant entrance is made of structural masonry accented with granite walls. [INSET]

The building’s original staircase had to be rebuilt to com ply with current codes. [OPPOSITE PAGE TOP]

Granite walls and granite bench give the entrance an additional use as a common space.

32 |

Masonr yDesign

Spring 2016

Randy Rathert, director of building and real estate for the Archdiocese of Saint Louis, served as the owner’s representative on this project. He appreciated the level of craftsmanship displayed not only on the construction of the new addition, but on all of the renovation work involved in this project. “The craftsmanship speaks for itself,” he said. “Everybody involved in the project enjoyed restoring this architectural treasure. It showed in the quality of their workmanship and the pride they took in their work. Smith is a good masonry contractor. I have worked with them on numerous projects over my career.” David Tarter served as superintendent and foreman on this project for John J. Smith Masonry, while Chris Nyland and Mike Healey also shared foreman duties. Masonry provided additional solutions to this sprawling renovation project. Modernizing entrances on this historic structure for handicapped access without taking away from the building’s original beauty with an ill-fitting addition required a high degree of craftsmanship. The main entrance to the undergraduate building was converted from a staircase into a switchback ramp that also functions as a common space. Granite walls on this ramp also serve as benches where people can congregate or wait for rides. Another ADA-compli-

Materials • Technolog y • Trends

ant entrance with granite ramps and walls was added to a courtyard area on the buildingâ&#x20AC;&#x2122;s interior. The new stone ramps blend seamlessly with the original architecture. The masons built the structures for new handicap lifts on the east and west sides of the sanctuary wing. They also added a new entry way on the west side of the sanctuary. A new, taller and steeper staircase was built to accommodate this new lift.

Modernizing entrances on this historic structure required a high degree of craftsmanship. PROVEN MASONRY STAINING * Permanent * Weather Tested * Natural Looking

Not all masonry staining companies are the same. Our penetrating process will not fade, peel, crack or blister because we do not create a layer on the surface. Ask them for proof.

BEFORE Bronze WinnerUniversity of Notre Dameâ&#x20AC;&#x2122;s Morris Inn

AFTER

1625 Miami St, South Bend IN 46613 * 888-698-8705 info@masonrycosmetics.com masonrycosmetics.com w w w.masonr ydesignmaga zine.com

Spring 2016

Masonr yDesign

| 33

DESIGN TRENDS | RESTORATION & REHAB

[ABOVE]

Project at a glance

The original power plant was converted to a student lounge and rec center.

Owner Archdiocese of St. Louis

Architect Cannon Design

General Contractor BSI Constructors, Inc.

Mason Contractor John J. Smith Masonry

Block and Brick Midwest Block and Brick

Precast Stone Caliber Cast Stone

Tuckpointing James G. Staat Tuckpointing and Waterproofing

Cut Limestone Architectural Stone

Craft Workers Bricklayers’ Union Local #1 of Missouri, Eastern Missouri Laborers’ District Council

34 |

Masonr yDesign

Spring 2016

The campus’s original power plant was repurposed to a student lounge and recreation center. Saving this building’s original brick for reuse whenever possible was an important part of this project. “We have people who know how to take masonry apart and save it, rather than just tear things down,” said Tarter. The masons built a three-story elevator shaft inside the building. A new handicap accessible entrance ramp featuring block footings, brick veneer, and limestone capping was installed on the structure’s main entrance. The building’s smokestack was capped and tuck-pointed to prevent water intrusion. Original brick and window lintels were removed, cleaned and repaired where necessary. No detail on this project was treated as minor. While it often is said that work is its own reward, the participants in the renovation of the Kenrick-Glennon Seminary are also proud of the recognition they have received from design and preservation organizations. “I have been involved in a lot of historic rehab projects,” said Rathert. “This was a very pleasurable project for me to be involved in. I’m very pleased with the end product and the process of the masonry.” wMD Originally appeared in the Masonry newsletter from the Masonry Institute of St. Louis. Reprinted with permission.

Materials • Technolog y • Trends

Watch our 3 min. video!

Beautiful Look, Healthy Building

For Commer cial, too!

Exterior Concrete Cladding with Rainscreen Technology Built-In For New Construction or Remodeling Castia Stone’s mortarless application system, innovative bracketing system, and “rainscreen” technology allows for ventilation and drainage. By creating a continuous 1/2” gap between the facade and the building structure, Castia Stone ensures a building’s structure is free from dry rot and mold. Get a timeless look in record installation times, year round, in all weather. Visit our website for a complete product listing and information on where to buy our products.

Available Nationwide!

129 Corporate Drive Clarksville, TN 37040 (817) 721-7700

www.CASTIASTONE.com

Supplies | Brick, Block & Stone From thin brick to full brick to pavers, no matter what your needs may be, manufacturers constantly are improving and expanding their offerings. Presented here are a few examples of new brick, block, and stone options for your design needs.

Get Your Products Featured! The summer 2016 Supplies section will feature software. Send your product descriptions and images to Cory SekinePettite at cory@lionhrtpub.com.

1 Echelon Masonry

EchelonMasonry.com

Oldcastle Architectural has launched Echelon, a new brand that will encompass the manufacturer’s vast portfolio of masonry products and services. Echelon Masonry will build on Oldcastle’s continuous innovation, with premium architectural block, color variety, full depth and lightweight veneers, high-performance wall systems, and environmental and acoustical performance upgrades. Oldcastle product categories such as Trenwyth Architectural Masonry block; Artisan Masonry Stone Veneers; Quik-Brik concrete masonry brick alternative; Architectural Concrete Masonry Units (regionally produced); Amerimix bagged blends; and Performance Upgrades, such as EnduraMax wall system and InsulTech insulated concrete masonry systems, will be consolidated under the Echelon brand, making them easy to evaluate for any architectural project.

2 Kensley Stone Thin Veneer EchelonMasonry.com

A new product to Oldcastle’s Artisan Masonry Stone Veneers line, which is part of the newly launched Echelon brand, Kensley Stone Thin Veneer is available in three color options that may be field blended to provide six total color options and is designed specifically to combine the timeless aesthetics of natural limestone with quick and easy installation. Echelon’s Kensley Stone veneer boasts a traditional ashlar pattern with a 3/8” mortar joint to blend upscale looks with minimal installation time and costs. Easy to clean and resistant to salt, water, and thaw damage, each stone also offers superior compressive strength compared to typical adhered veneers, while avoiding unwanted flanges on the back of the stone. Intended for non-bearing applications, the lightweight veneers require no footings.

3 Acme thinBRIK

www.brick.com

ThinBRIK from Acme Brick Company is available with a system of lightweight metal panels where bricks are adhered with adhesive and then secured with traditional mortar. Typically an interior residential application such as a contrasting wall can be installed one or two days. For commercial applications, thinBRIK greatly enhance a building’s exterior façade at a competitive price. Acme offers heavy-duty installation panels that are tested to 400 feet high at wind loads of 150 mph. ThinBrik are available in a wide color palette and available nationwide.

36 |

Masonr yDesign

Spring 2016

Materials • Technolog y • Trends

4 Pine Hall Brick

www.pinehallbrick.com

Pine Hall Brick’s Facebrick line features authentic and simulated tumbled brick for an antique look. The series includes classic blended colors from red ranges to grays; sand and ongobe finishes. Pine Hall’s manufacturing process includes computer-controlled production and an in-house testing lab for “run to run” consistency. Additionally, the Facebrick line features a Special Shape Brick for added design creativity, and a full Paver Line, including English Edge & the “Old” Series. Pine Hall says its Facebrick far exceeds ASTM C216, Grade SW, Type FBS (Type FBA-tumbled & rockface brick). Further, its modular face brick tests show: • Average compressive strength: 15,030 psi • Average Absorption: 4.2 % • C/B Ratio: .59 • Initial Rate of Suction: 9.8 grams / minute • No efflorescence

advertiser’s index page#

company-phone-website

Acme Brick Company

Laticrete International, Inc.

800.792.1234 www.brick.com

800.243.4788 www.laticrete.com/mvis

1 Amerimix

Pine Hall Brick Company, Inc.

800.334.8689 www.pinehallbrick.com

Lehigh White Cement Company 24-25

SPEC MIX, Inc.

888.313.0755 www.amerimix.com

610.366.4600 www.lehighwhitecemnet.com

888.773.2649 www.specmix.com

Castia Stone

Masonry Cosmetics, Inc.

817.721.7700 www.castiastone.com

888.698.8705 www.masonrycosmetics.com

County Materials

800.664.6638 www.mortarnet.com

12-13

Hohmann and Barnard, Inc.

Tradesmen’s Software

Mortar Net Solutions

800.242.7733 www.countymaterials.com

800.645.0616 www.h-b.com

800.494.4899 www.tradesmens.com

Oldcastle / Echelon

844.495.8211 www.EchelonMasonry.com

MUSEUM OF PRAIRIEFIRE

GUIDE MORE TRAFFIC TO YOUR WEBSITE!

p12

Summer 2015 • Vol. 6, No. 2

Material s • Technol ogy • Trends

RIJKSARCHIEF IN BRUGES

WITH

Contem porary des ign in an old-world setting

p36

Fall 2015 • Vol. 6, No. 3

GRIMMWELT

KASS

EL A new museum about the Brother s Grimm p12

Material s • Technol ogy • Trends

SANDS & SEAL ANTS

p46

Contact your ad representative today! Advertising Contacts: Marvin Diamond 888.303.5639, ext. 208 marvin@lionhrtpub.com

w w w.masonr ydesignmaga zine.com

WINTER IS COM ING

p22

BUZZWORTH

Y DESIGN

BIM FOR MAS ONR

RELEASES NEW ROADYMA P

p30

John Davis 888.303.5639, ext. 226 jdavis@masonrydesignmagazine.com

1200 SEVENTEEN TH STREET ZGF’s beautiful hard

scaped roof

p36

CHALLENGING

Spring 2016

THE MYTHS OF PERMEABLE PAVE MENT

p26

Masonr yDesign

| 37