LEED V4 EXPLAINED p12 Winter 2014-15 • Vol. 5, No. 4
Materials • Technology • Trends
AIR, VAPOR, & WATER BARRIERS p32
RESTORING ASTLEY CASTLE Modern architecture in an ancient place p26
DUNCAN G. STROIK’S
NEW CHURCH p20
DESIGNED BY PROS. USED BY PROS. Amerimix®. The CLEAR choice for mortars, grouts and stucco. Consistency. Labor reduction. Enhanced productivity. ASTM specifications pretesting. Reduced waste and risk. These are the dynamic benefits that make preblended Amerimix products the choice of professionals everywhere. Our experienced sales, customer service and technical support teams are ready to help you select the right Amerimix product for your high-volume application. Visit Amerimix.com or call 888-313-0755.
Amerimix® is a registered trademark of Bonsal American, Inc., an Oldcastle Company.
NEW LathNet™ Drainage Mesh and Metal Lath in One
For Stucco and Adhered Masonry Install the metal lath and drainage plane in one simple step > > > >
Reduces labor time and costs Reduces wall penetrations Installs and performs just like regular metal lath Walls dry fast, stay drier than with lath alone
Exterior grade sheathing *LathNet™ panels shingle-style overlap on all vertical and horizontal joints
Weather resistive barrier
*LathNet™ combination lath & drainage mesh installed left to right
Thin Stone Veneer or Stucco Finish Coat
Scratch Coat Base Coat
*Patent pending
Click HERE to see LathNet in action
Call or email for samples: technicalservices@mortarnet.com 800.664.6638 mortarnet.com
volume 5 | Number 4
Winter2014-15 |contents
f e at u r e s 12 Materials
LEED: A Focus on Product Transparency
When USGBC launched LEED v4, it significantly advanced its mission to “transform the way we think about how buildings and communities are designed.” By Julie Rapoport
20
Project Spotlight
Answering The Call
It’s not every day that one receives a call from a priest requesting one’s design services for a new church. But if that day comes, you’re certainly going to pick up the phone. By Cory Sekine-Pettite
26
Restoration
Standing The Test Of Time
Following its renovations, Astley Castle was awarded the prestigious Riba Stirling Prize for Architecture. By Cory Sekine-Pettite
2 |
Masonr yDesign
|
Winter 2014-15
Materials • Technolog y • Trends
www.masonr ydesignmagazine.com LIONHEART PUBLISHING, INC. 506 Roswell Street, Suite 220, Marietta, GA 30060 Tel: 770.431.0867 Fax: 770.432.6969 E-mail: lpi@lionhrtpub.com www.masonrydesignmagazine.com Publisher John Llewellyn llewellyn@lionhrtpub.com Editor Cory Sekine-Pettite cory@lionhrtpub.com Managing Editor Jennifer Morrell jmorrell@lionhrtpub.com Art Director Alan Brubaker albrubaker@lionhrtpub.com Assistant Art Director Jim McDonald jim@lionhrtpub.com Online Projects Manager Patton McGinley patton@lionhrtpub.com Advertising Sales Director Marvin Diamond marvin@lionhrtpub.com Advertising Sales Art Shaeffer art@lionhrtpub.com Reprints Kelly Millwood kelly@lionhrtpub.com Subscriptions Amy Halvorsen amyh@lionhrtpub.com
On the cover:
The restored Astley Castle in Warwickshire, England underwent an extensive restoration process and now stands as a testament to how firms can combine the thrill of modern architecture with the atmosphere of an ancient place.
The editorial mission of Masonry Design is to educate and inform architects, engineers and specifiers about the vital role that masonry plays in the construction markets in the United States and Canada, as well as to promote masonry and masonry systems in building design (commercial, residential, institutional and educational), interior design and hardscaping applications. With each issue, readers will become better informed of the design trends, latest materials and newest technologies that will aid them in creating better masonry projects.
Masonry Design (ISSN 1941-0975) is published quarterly by Lionheart Publishing, Inc.
co l u mns & D ep a r t me n t s 4 6 32 33
From the Editor Industry News Supplies Index to Advertiser’s
Subscription Rates – For a free subscription to Masonry Design and Masonry Design eNews, sign up at: www.masonrydesignmagazine.com Click on Subscribe
Copyright © 2015 by Lionheart Publishing, Inc. All rights reserved. The copyright owner, however, does consent to a single copy of an article being made for personal use. Otherwise, except under circumstances within “fair use” as defined by copyright law, no part of this publication may be reproduced, displayed or transmitted in any form or by any means, electronic or mechanical, including photocopying or by any information storage and retrieval system, without the prior written permission of the copyright owner, Lionheart Publishing, Inc. Send e-mail permission requests to cory@lionhrtpub.com.
Disclaimer – The statements and opinions in the articles of this publication are solely those of the individual authors and contributors and do not necessarily reflect the opinions of Lionheart Publishing, Inc. or the editorial staff of Masonry Design or any sponsoring organization. The appearance of advertisements in this magazine is not a warranty, endorsement, or approval of the products or services advertised.
w w w.masonr ydesignmaga zine.com
Winter 2014-15
|
Masonr yDesign
| 3
from the editor
First-World Problem
Cory Sekine-Pettite, editor To make comments or suggestions, send e-mail to cory@lionhrtpub.com.
Recently, I renovated one of the bathrooms in my home. I tore it down to the studs and started from scratch. The process wasn’t easy or swift, but it wasn’t the work that was the difficult part – it was the decision-making. My wife and I spent months determining what materials, fixtures, furniture, and paint colors we wanted to incorporate. We weren’t arguing over tile and faucets – in fact, we generally have the same taste in home décor. What took so long was actually wading through web pages, sifting through materials samples, and working with our wise contractor to create our ideal bathroom. As you know, home renovations often can seem like herculean chores. Why is it easier to help make design choices for clients (or even friends), but borderline impossible to decide for yourself what tile and fixtures to install in your own residence? Have you experienced this with your own home improvement projects? Anyway, as I’m sure you can attest, just as soon as the new bathroom started coming together – my “renovation brain” still in high gear – I started thinking of other potential home improvements to tackle. Why do we
torture ourselves like this? Why was I already thinking of new ways to stress myself before I could even take a shower in the new bathroom? Was I nesting? Are men actually capable of nesting? Truthfully, I just want to make a few improvements to my home before moving into a larger space. So now a new fireplace surround and mantle sit atop my renovation list. In this case, the choices are perhaps even more overwhelming. For materials, I can choose among brick, stone veneer, river rock, tile, and so on. Beyond that, I also need to settle on a color scheme. Do I go for a traditional design, or take a more modern approach? And lest I forget, what can I actually afford? You might be thinking: “Cory, this is where professional designers come in.” And you would be right. The folks who helped us with our bathroom – the same people who helped us redesign our kitchen several years ago – have been invaluable. I have total respect for their broad knowledge, and by extension, the expertise of the larger design/build community. Struggling over materials selection for a home improvement project is a total first-world problem, but I sure am glad to have a wealth of professional assistance just a phone call or email away. wMD
highlights coming in
Spring ‘15
Follow our Blog: http://masonrydesignblog.wordpress.com/
Find us on Facebook: www.facebook.com/MasonryDesign
• Restoration & Rehab • Specifying Flashing • Structural Investigation
Follow us on Twitter: @cspettite and @Masonry_Design 4 |
Masonr yDesign
|
Winter 2014-15
Materials • Technolog y • Trends
Industry News
IMI Presents the Masonry Education Webinar Series Now through May, a Masonry Education Webinar Series is available, sponsored by the International Masonry Institute. These webinars are intended for designers, facility managers, construction managers, owners, and members in good standing of the International Union of Bricklayers and Allied Craftworkers, and their signatory contractors. The programs began in January; the remaining courses are as follows: http://www.imiweb.org/
Tuesday, February 3 Noon to 1:30 p.m. Eastern Designing and Detailing Quality Masonry Structures
This presentation will focus on all aspects of the complete masonry cavity wall system including veneer, the cavity, flashing and weeps, insulation and concrete masonry units. The program will show how all these parts work together to provide an energy-efficient wall system that will be durable as well as cost-efficient.
Tuesday, February 17 Noon to 1:30 p.m. Eastern Advanced Masonry Details for Buildings & Landscape Architecture
This presentation will highlight new advances in masonry, rainscreen, and landscape design. The presentation will include new details for site walls, exterior paving, ventilated cavity walls, anchored veneer with stud back-up, rainscreen walls, adhered veneers with continuous insulation, and partition walls.
Tuesday, March 3 – Noon to 1:30 p.m. Eastern Current Methods and Methodology for Cleaning Historic Masonry Structures
This session presents the rationale and methodology for cleaning both interior and exterior historic masonry surfaces. Cleaning can be the first type of repair measure performed on a new masonry structure to remove any construction residue. Cleaning can also be performed as part of a maintenance program or restoration project. In each of
these instances, the masonry can be susceptible to damage caused by an improper selection of materials or methods. Understanding how to approach and develop a proper testing program is the first step in determining which technique will clean the building while promoting long-term performance. The program will introduce current cleaning systems and describe their general performance and applications. Specific attention will be paid to chemical, micro-abrasive, laser and latex systems.
Tuesday, March 24 Noon to 1:30 p.m. Eastern Sustainability and Resiliency for Existing Masonry Buildings
Significant prospects exist for restoring and retrofitting the exterior and interior systems in existing masonry buildings. This seminar will examine strategies for addressing resilient design in existing buildings that include energy savings passive systems, durable design, occupant comfort, and indoor air quality that will improve building flexibility. This seminar also will examine and cross reference LEED concepts related to LEED for Existing Buildings: Operations & Maintenance.
Tuesday, April 7 Noon to 1:30 p.m. Eastern Do’s and Don’ts of Tornado Shelter Design
This presentation will focus on correct planning for storm shelters based on the applicable ICC and FEMA standards. Tornado impact, shelter design and examples, owner and design professional perspectives, and project funding are discussed. Webinar Series, continued on p8
6 |
Masonr yDesign
|
Winter 2014-15
Materials • Technolog y • Trends
Business Briefs BIM-M Initiative Awards Contract to Dr. Franca Trubiano of the University of Pennsylvania Dr. Franca Trubiano
Dr. Franca Trubiano of the University of Pennsylvania has been awarded a contract from the BIM-M (BIM for Masonry Initiative). The work will include researching the range of masonry workflows that were used in the construction of Huntsman Hall, a signature masonry building at the University of Pennsylvania in Philadelphia. Her work will be part of the BIM-M Benchmark project and coordi-
nated with similar work being performed at Georgia Institute of Technology. BIM-M is an initiative of the masonry industry with major sponsorship from Masonry Contractors Association of America (MCAA), International Masonry Institute (IMI), International Union of Bricklayers and Allied Craftworkers (IUBAC), and National Concrete Masonry Association (NCMA) with assistance from the Charles Pankow Foundation. wMD
OMA Appoints David Gianotten as Managing Partner–Architect The Office for Metropolitan Architecture (OMA), based in Rotterdam, Netherlands, has appointed David Gianotten to serve as managing partner-architect. After the recent expansion of the OMA partnership to 10 partners, Gianotten will oversee the firm’s offices in Rotterdam; Hong Kong; Beijing; Doha, Qatar; and New York. He will primarily be responsible for the daily operations, business growth, and long-term strategy of the company. Alongside his managerial tasks, Gianotten will remain actively involved in OMA’s creative and architectural work, and will continue to oversee some of his ongoing projects in Asia and Australia. In early 2015, he will relocate from Hong Kong to The Netherlands, allowing him to work more closely with all of OMA’s partners, associates, creative teams, and support staff in the company’s five offices. About David Gianotten: In his previous role as partner-in-charge of OMA’s Hong Kong and Beijing offices and director of OMA w w w.masonr ydesignmaga zine.com
David Gianotten
Image © OMA
Asia, Gianotten led the firm’s large portfolio in the Asia Pacific region. Projects under his design and supervision include the Taipei Performing Arts Centre in Taiwan, the Hanwha Galleria in Busan Korea, the Taiyuan Industrial Heritage masterplan in China, and the Prince Plaza Building in Shenzhen China. He was responsible for the recently completed Shenzhen Stock Exchange headquarters, the end stages of the CCTV headquarters in Beijing, and OMA’s conceptual masterplan for the West Kowloon Cultural District in Hong Kong. David joined OMA in 2008, launched OMA’s Hong Kong office in 2009, and became partner at OMA in 2010. He studied architecture and construction technology at Eindhoven University of Technology, and before joining OMA was Principal Architect at SeARCH in the Netherlands. wMD Winter 2014-15
|
Masonr yDesign
| 7
Industry News
IMI Presents the Masonry Education Webinar Series Webinar Series, continued from p6
Tuesday, April 21 Noon to 1:30 p.m. Eastern Thinking Inside the Box – Masonry Partition Wall Design
The new software tool developed by IMI provides the opportunity to engineer masonry interior partitions with simple input, but with results that come from a rigorous engineering analysis. The program offers options for: unreinforced or reinforced concrete masonry units, unreinforced clay brick units, compliance with IBC 2009 or IBC 2012 allowable stress design provisions, three support conditions – vertical, horizontal and cantilever, input of vertical loads, horizontal uniform loads, horizontal concentrated loads, input for all risk categories as well as egress stairways, and input for all seismic design categories. Options can be changed and compared quickly, and easily, permitting the designer to optimize the wall system in minutes To learn more and to register for any of these programs, contact Dawn Lafey at (301) 291-2110 or dlafey@imiweb.org.
Tuesday, May 5 Noon to 1:30 p.m. Eastern Tile Design and Construction
or visit: http://info.imiweb.org/ masonry-educationwebinar-series
Attendees will develop an understanding of the various types of tile, setting methods, system components, design and installation considerations, specialty systems, and quality assurance. Attendees will learn how to use applicable codes
and standards to design, specify, and construct tile work meeting minimum requirements and best practices. The program will emphasize design and installation requirements for large format tile, including substrate preparation. It will discuss how to comply with Division 3 and Division 9 criteria for floor flatness. The program also will look at the new standards for coefficient of friction (COF) as well as the new recommended specification language for installer qualifications appearing in the TCNA Handbook and MasterSpec.
Tuesday, May 19 Noon to 1:30 p.m. Eastern Reinforcing Historic Masonry Walls
In many instances, historic masonry walls require reinforcing to either stabilize or strengthen the masonry system. These situations may arise from any number of reasons, including poor original design or construction, damage due to seismic activity, or just general weathering and/or deterioration. This course will outline some of the most common scenarios and present a variety of current methods available to address the causes as well as the symptoms. Particular attention will be paid to pinning and grouting systems, which have been designed for structural and non-structural applications. wMD
2014 Construction Put In Place to End Strongly Total Construction Put In Place (CPIP) for 2014 will be $62 billion greater than last year — a 7-percent increase, according to the latest report from FMI. CPIP should finish 2014 with around $972 billion and is expected to top $1.04 trillion in 2015. Commercial and manufacturing construction are two of the largest growth sectors, accounting for more than $111 billion in new construction. Randy Giggard, managing director of research services for FMI says, “With new and apparently sustainable sources of natural gas and shale oil, 8 |
Masonr yDesign
|
Winter 2014-15
America is on the verge of a veritable manufacturing renaissance, building petrochemical plants in the Gulf and gaining interest from more companies, especially foreign-owned companies, considering relocating manufacturing to America.” Lodging experienced the largest percentage increase for CPIP in 2014. It is expected to finish the year up 24 percent from 2013, building on a 25-percent increase. This sector now accounts for nearly $17 billion in CPIP. To download a copy of the current Construction Outlook, click here. wMD Materials • Technolog y • Trends
Arriscraft Offers CAD Details of its Thin-Clad Products to the A&D Community Arriscraft, manufacturer of all-natural products that emulate quarried stone, has been working to produce new CAD details of its comprehensive Thin-Clad products. Arriscraft is the stone products group of General Shale, the North American subsidiary of Wienerberger AG, and a leading manufacturer of brick. Easily downloaded so architects and designers may use them in project drawings, these include the Face Sealed/Barrier Wall details for ARRIS.tile and ARRIS.stack. Both detail sets are available in the Arriscraft-CADD Library at http://www.arriscraft.com/ca/technical/ tech_cadd.asp. According to Arriscraft Thin-Clad Manager, Craig Swirzon, “This accounts for about 700 individual and unique details in total. We will next be working on the insulated drainage plane details. After that, we will be adding details for ASHRAE 90.1, drainage plane, insulated drainage plane with ‘Z’ channels for ARRIS-tile and ARRIS-stack as well as additional ARRIS-clip details. “This once again sets us apart as the only manufacturer with such a large scope of available details to use for adhered veneers,” continued Swirzon. wMD
Bruss Landscaping Wins 2014 Hardscape North America Best-Project Award Wheaton, Ill.-based landscape firm recognized nationally for home renovation project that epitomizes a popular trend in outdoor living. Bruss Landscaping, a suburban Chicago landscape contractor, is the winner of a 2014 HNA Hardscape Project Award for a recently completed project that highlights a popular trend in home design and outdoor living – the front patio. The annual HNA Hardscape Project awards recognize outstanding hardscape projects across North America by contractors building residential and commercial walkways, patios, driveways and commercial plazas, parking lots, streets and more. The concept of a front patio continues to be the trend in residential neighborhoods where owners of modern-era homes, missing the big front porches of yesteryear, want to reconnect with their community in a casual, spontaneous way. The front patio functions as a fresh-air foyer or sitting area where homeowners can greet neighbors or passers-by, or simply enjoy the beauty of their own front yards. The award-winning project designed and built by Bruss Landscaping topped the field of competitors as best-in-category for Residential Clay Brick for its superb craftsmanship and detail with materials. w w w.masonr ydesignmaga zine.com
Located in suburban Chicago, the project is a craftsman-style home on a semi-wooded lot with good frontage views. The design and installation team at Bruss worked with the homeowners on the redesign of the front entry, driveway, and green spaces to transform an obscured entryway into a more sociable front patio. Bruss removed the standard asphalt driveway and replaced it with a horseshoe-shape drive constructed of “Old Chicago” clay brick pavers, complete with a radiant heat system under the brick for melting snow. The former plain, 3-foot-wide concrete walk was replaced with an elegant brick walk and spacious bluestone sitting area. Four stone columns around the sitting area support a custom wood pergola where flowering vines climb overhead. A custom stone fountain harmonizes with the craftsman architecture and provides the pleasing sound of water. wMD Winter 2014-15
|
Masonr yDesign
| 9
Industry News
ASLA to Renovate its Headquarters into Center for Landscape Architecture The American Society of Landscape Architects (ASLA) has embarked on a $4-million plan to renovate its headquarters building to create a Center for Landscape Architecture. The organization purchased the 12,000-squarefoot building in 1997 for $2.4 million, just as D.C.’s Chinatown neighborhood was being revitalized. After 17 years of occupancy, any building would be in need of renovation. However, ASLA leaders saw the opportunity to do much more. “Today, our headquarters is in a vibrant neighborhood, and the building is valued at $6.9 million – a 189-percent return on our investment,” said Mark A. Focht, FASLA, immediate past president of the ASLA, in presenting the renovation plan to the Society’s Board of Trustees for approval in late November 2014. “This is an opportunity to create a facility to reflect the image and ethic of our profession – a world-class Center for Landscape Architecture that will inspire and engage our staff, our membership, allied professionals, public officials, and the general public.” The ASLA Board of Trustees approved the $4-million plan with nearly unanimous support. “ASLA paid off the original mortgage last summer, so the Society is in an excellent financial position to take out a $3-million mortgage and raise the balance of what we need through fundraising and product donations,” said Nancy C. Somerville, Hon. ASLA, executive vice president/CEO of the Society. Focht made a personal pledge to contribute $15,000 to the project and challenged the other Board members to join him in launching the fundraising efforts. James Burnett, FASLA, founder of award-winning landscape architecture firm The Office of James Burnett, donated $25,000 to the project and volunteered to chair a fundraising task force to raise the remaining funds needed. “Since the Board approved the project on November 20, we’ve received more than $330,000 in payments and pledges – that’s over 33 percent of our goal,” said Burnett. “We’ll also seek in-kind product donations lighting, furniture, green walls, kitchen appliances, surfacing, and other items. We’re committed to creating a space for ASLA’s national headquarters that reflects the complexity and vitality of our profession, and the more successful our fundraising is, the more successful the project will be.” 10 |
Masonr yDesign
|
Winter 2014-15
Gensler was selected through a request for proposal process to lead the design team, which includes landscape architecture firm Oehme, van Sweden, to ensure the profession’s values will be well-represented. The building will be designed to LEED Platinum and WELL™ building standards. Gensler has developed a number of exciting design con- Current Condition: Façade of ASLA cepts to modify the Headquarters at 636 Eye St., NW, in the Chinatown neighborhood of building: Washington, D.C. 1. The façade will be slightly altered at the ground level to provide more of a street presence. 2. The street level will be reconfigured to become the public face of the Center for Landscape Architecture, and will feature flexible meeting/event space, exhibit space, a catering kitchen and restrooms to provide for increased industry and public engagement. 3. The current closed, double staircase will be opened up to create a three-story, day-lighted atrium, engaging the floors vertically and providing an opportunity to display elements of landscape architecture. 4. Office space will be reconfigured and furnished to meet current staff needs, and to provide for future growth. Staff also will have access to a wellness room, focus rooms, small conference rooms, and upgraded kitchen, break, administrative, and restrooms. Conceptual drawings are available on the Center for Landscape Architecture website, along with a list of donors, naming rights opportunities, and information on making a donation to the project. Currently, construction is planned to begin in fall of 2015. wMD Materials • Technolog y • Trends
Acme Brick Company Announces Updates to Mobile App Acme Brick Vision This free app – Acme Brick Vision – allows users to view Acme’s brick product line on both residential and commercial building elevations, or as a brick sample in a close up view. Acme Brick Vision allows the user to pick an elevation, put their choice of brick on the building, and change variables such as mortar color, trim paint color, and roof color. With Acme Brick Vision it is possible to create more than one million unique combinations of brick, mortar, roof, and trim colors, the company says. Acme Brick Vision has been updated with several new features that make it more useful: 1. The photo gallery section shows enlarged views of brick panels and rendering, and adds any location photographs taken in the field of a specific product. 2. The all-new favorites section allows the user to save sets of brick. These can then be shared with other users from within the app and includes a help section. 3. There are new elevations for rendering brick, and the mortar colors are updated to reflect the most current selections. 4. A new brochures section offers PDF brochures for Acme publications. All the traditional features in the original version of Acme Brick Vision are in place. The Material Close Up option shows a brick wall section with different mortar colors. Both views can be enlarged to a full-screen view tailored to the viewer’s iPad model, and can be saved to the user’s camera roll. Brick selections can be searched by name, size, brick plant, or by color families. For each product listing, viewers can scroll to a detail page that provides a full set of technical specifications for that brick product. Acme Brick Vision can be downloaded from the Apple app store. wMD
Want to share your company’s news? Email Cory Sekine-Pettite at cory@lionhrtpub.com. w w w.masonr ydesignmaga zine.com
Winter 2014-15
|
Masonr yDesign
| 11
GREEN BUILDING
LEED:
A FOCUS ON PRODUCT TRANSPARENCY 12 |
Masonr yDesign
|
Winter 2014-15
Materials • Technolog y • Trends
WHEN USGBC LAUNCHED LEED V4, it significantly advanced its mission to “transform the way we think about how buildings and communities are designed, constructed, maintained, and operated.” It was, perhaps, the most significant shift in program approaches since LEED was started 14 years ago, with changes designed to push designers and builders into new realms of sustainability innovation. Some of the most dramatic changes came in the Materials & Resources (MR) section, where product transparency and life cycle assessment (LCA) are given considerable emphasis – encouraging, if not forcing, a more holistic view of product specification. In previous versions of LEED, the MR section included credits for single attributes such as recycled content or regional materials (sourcing products from within 500 miles of the jobsite). That initial approach was suitable for the program in its w w w.masonr ydesignmaga zine.com
[ABOVE]
Hancock Elementary is slated to be the first LEED-certified K-12 school in Mississi ppi. Though it was designed prior to LEED v4, the architects employed product benchmarking practices to compare environmental impacts in several product categories.
By Julie Rapoport
Winter 2014-15
|
Masonr yDesign
| 13
GREEN BUILDING
[ABOVE]
Under LEED v4, architects can earn credits for specifying products that have a third-party-verified environmental product declaration, such as that available from CalStar.
early years, when the idea of green certification and specifying green materials were new concepts. The earlier versions of LEED also wound up driving change at the manufacturing level and led to more sustainable products. “For the place where the market was 10 years ago, that was an effective way to define what a green product was,” says Sarah Buffaloe, LEED materials specialist at USGBC. “As a result of these credits, we saw an uptick in information available and in new products. For example, we saw an incredible supply chain transparency start to appear as a result of the awareness of regionality as a sustainability factor.” But most stakeholders agree that, while that initial approach had value, it also had limitations. Most notably, it essentially allowed people to pick some attributes, while ignoring others. For example, a product that incorporated a large quantity of recycled material could earn credits, even if that product also had a high carbon footprint. With experience, as well as a much wider selection of green products, it is now easier to build a green building than it was a decade ago. USGBC recognized that they could encourage people to look for ways to get even greener, and challenged the program committee to look at the MR credits more holistically. The result is LEED v4, released in 2013, in which the MR section promotes product transparency by awarding credits for using products with LCAs and that reduce environmental impact in multiple ways instead of just one. How it works Under LEED v4 Materials & Resources, users can earn several credits. Product Disclosure and Optimization
There are credits available for using products that state what materials are used (product disclosure). There are also credits for products whereby manufacturers reduce the environmental impact (product optimization).
IN THE NEWS
BSD Supports Green Initiatives Building Systems Design Inc. (BSD), a company offering software tools for the architecture, architectural engineering and construction markets, has published revisions to 116 specification sections related to sustainable design for architects and engineers. BSD SpecLink-E, BSD’s automated specification production system, has supported the various LEED rating systems published by the U.S. Green Building Council (USGBC) for many years. BSD’s latest sustainability updates support LEED v4 BD+C, USGBC’s most recent green rating system. The updates support other green initiatives, such as the Green Globes project developed by the nonprofit Green Building Initiative. BSD accomplishes this support of multiple green systems by organizing all relevant design issues into five categories: 14 |
Masonr yDesign
|
Winter 2014-15
• Location – Requirements intrinsic to location, such as access to transit or use of a brownfield site • Design Phase – Topics related to activities during project design, such as site master planning • Post-Construction – Occupancy issues, such as green power offsets and “no smoking” policies • Design Embodiment – Performance issues such as daylighting, views and energy usage • Contract Documents – Requirements explicitly included on drawings and/ or in specifications, such as site boundaries for vegetation protection and contractor’s quality procedures. Materials • Technolog y • Trends
There are several ways to get these credits: tt
Environmental Product Declarations Option 1. Use products with some sort of Environmental Product Declaration (EPD).
• Product-specific declaration. • These are products with publicly available, critically reviewed LCAs conforming to ISO 14044. Products with externally verified LCAs are considered more transparent than those with internally verified LCAs. • Or Environmental Product Declaration • This is a document based on the results of the LCA published by the manufacturer. It shows the environmental impact of the product in a variety of categories (e.g., fossil fuel depletion, global warming potential, etc.). This document can be weaker or stronger depending on the rigor of its third-party review. • Or USGBC-approved program that creates some sort of EPD or other sustainable product certification.
WITH EXPERIENCE, AS WELL AS A MUCH WIDER SELECTION OF GREEN PRODUCTS, IT IS NOW EASIER TO BUILD A GREEN BUILDING THAN IT WAS A DECADE AGO.
And/or Option 2. Multi-Attribute Optimization
• Use third-party products with documented reduction in environmental impact in at least three categories, compared to industry average. Note that this option requires some sort of industry average information to be available, which is not always the case. Categories include global warming potential (greenhouse gases), depletion of the stratospheric ozone layer, acidification of land and water sources, eutrophication, formation of tropospheric ozone, and depletion of nonrenewable energy resources (fossil fuel use). • Or products must comply USGBC approved multi-attribute frameworks. In addition, extra credit is given for products sourced within 100 miles of the project site. This is one way in which the regional materials attribute is retained with LEED v4.
In general, BSD places the sustainable design requirements in each applicable specification section, rather than gathered together in a single section, so the issues can be addressed independently of which rating system is being used on a particular project. BSD SpecLink-E is built on a relational database, rather than word processing files, so BSD has built into the database more than 170,000 “intelligent links” that help to edit project specifications based on decisions made by the user. This linking feature is especially helpful when a design professional wishes to pursue certification under a particular green rating system. By activating Section 01 3329 – Sustainable Design Reporting, a user can select the desired rating system, and make further choices from the w w w.masonr ydesignmaga zine.com
options presented. The built-in links will automatically activate related provisions in other spec sections. When all necessary specification sections have been fully edited, the system can print a submittals report that lists all sections in the project requiring submittal of sustainable design documentation. Subscribers to BSD SpecLink-E can automatically download and install the hundreds of paragraphs involved in this sustainability update through a new software feature. Instead of quarterly updates that replace the entire master database, BSD’s system lets users choose to have updates downloaded as frequently as daily, but not less often than quarterly. Or, the user can download and apply all available updates to the master database within a few minutes. Winter 2014-15
|
Masonr yDesign
| 15
GREEN BUILDING Sourcing of Raw Materials The idea here is to reward stakeholders for using products verified to have been sourced responsibly. Option 1. Raw Material Source and Extraction Reporting
• Manufacturers use raw materials suppliers who source materials responsibly and have clear, ecologically responsible land use practices, as well as a commitment to reduce environmental damage that could result from material extraction. And/or Option 2. Leadership Extraction Practices
• The user specifies a certain amount of products that meet requirements for “extended producer responsibility” or “leadership extraction” criteria. Functionally, all wood specified is FSC-certified. The recycled materials and materials reuse attributes in previous versions of LEED are embedded in this credit. Extra credit is also given for products sourced within 100 miles of the project site.
[BELOW]
With an environmental product declaration providing third-party verification of life cycle impacts and SMaRT certification indicating environmental savings and supply chain transparency, CalStar Products’ bricks qualify for a variety of Materials & Resources credits under LEED v4.
16 |
Masonr yDesign
|
Winter 2014-15
Material ingredients The idea behind this credit is to ensure that manufacturers reduce use and generation of harmful ingredients. Option 1. Report all ingredients that make up at least 0.1% of product. Manufacturers can keep intellectual property or proprietary chemicals secret as long as they disclose what the chemicals do and if they are harmful. And/or Option 2. Use no harmful substances. Substances of concern are listed in a comprehensive database (or on multiple lists). Any ingredients used in quantities greater than 100 ppm are considered. And/or Option 3. Use products from manufacturers whose supply chain has already been third-party verified to manage health, safety and environmental characteristics of chemical ingredients. Alternatively, source products from manufacturers with robust safety, health, hazard and risk programs that document at least 99 percent by weight of all ingredients that go into the product. Overall, stakeholders are strongly encouraged (via the opportunity for credits) to seek out and use products whose environmental impacts and supply chain have been externally verified according to industry-approved standards. At this early stage, having the documentation itself is arguably more important than what it says. Several of the credits can be earned regardless of the results. For example, two products with externally verified EPDs contribute to the several of the same points, even if one has a significantly higher carbon footprint. (The product with the lower carbon footprint might also be able to contribute to other points.) At present, the goal is to promote transparency. Once this has become standard practice, it is conceivable credits will start to emphasize environmentally preferable products. In the meantime, the information is available Materials • Technolog y • Trends
for consideration, enabling specifiers to choose environmentally preferable products, even if the reduced environmental impact is not required to earn certain MR credits. Catalyst for change The overarching result of LEED v4’s shift in focus is the specification of more transparent products – those that take the holistic approach of life cycle assessment and look beyond single attributes. This allows users to understand where environmental tradeoffs might exist so the best decisions can be made for each specific project. Eventually, the building industry might follow the path of the food industry: The FDA developed a standard nutrition label for foods so consumers can make informed comparisons. Product users would like to see building products more comparable, so it is easier to understand the impact of products. Where food labels contain fat content and calorie count, product labels might spell out fossil fuel consumption and recycled content. Just as some consumers might watch sodium or sugar intake depending on personal needs, some specifiers might be more concerned with carbon footprint or water resources, depending on project needs. The new system also allows innovative products with reduced energy use, carbon footprint, and other environmental impacts to contribute to a variety of credits. In previous versions of LEED, there were no formal credit opportunities for these types of products, other than Innovation in Design credits. Challenges remain As with any major change, there are drawbacks. Possibly the biggest concern is the relative dearth of products with LCAs and published EPDs or HPDs. Further, finding them isn’t as straightforward as it could be. There’s no master list to discover EPDs across the industry. (Each EPD program operator has a list, but there are numerous EPD program operators.) The onus is on specifiers to perform the extra research in pursuit of increased sustainability. However, demand for these tools is increasing. Last year, the concrete industry finalized Product Category Rules (PCRs) for concrete, which laid the groundwork for concrete manufacturers to conduct individual LCAs and publish EPDs. In addition, PCRs have recently been finalized for concrete masonry units. In late-2012, CalStar Products published the first EPD in the brick category, with the document providing third-party verification of environmental impacts. CalStar bricks also received a SMaRT sustainable product platinum rating, indicating significant reduction in environmental impact, as well as supply chain transparency and minimization of harmful chemicals. These documents together allow CalStar bricks to contribute to a variety of MR credits under LEED v4. Similar advances are underway in other product categories, as well, particularly carpet, gypsum, and wood. Like the recycled content credits that initially drove industry change, USGBC’s Buffaloe expects LEED v4 to do the same: “Transparency enables evaluation…which enables preferential selection…which leads to innovation. And innovation leads back to reporting and transparency. It’s a cycle of its own resulting in market transformation.” Perhaps, 14 years from now, we’ll view LCAs and EPDs as commonplace and straightforward as trying to use more recycled materials and sourcing locally. wMD
tt
THE ONUS IS ON SPECIFIERS TO PERFORM THE EXTRA RESEARCH IN PURSUIT OF INCREASED SUSTAINABILITY.
Julie Rapoport, Ph.D., P.E., LEED AP BD+C is VP of engineering for CalStar Products. Reprinted with permission from Nov. 2014 Masonry Magazine. w w w.masonr ydesignmaga zine.com
Winter 2014-15
|
Masonr yDesign
| 17
PROJECT SPOTLIGHT
ANSWERING THE
CALL
Duncan G. Stroik, Architect, LLC designs a new, red brick Romanesque church in Spartanburg, S.C.
Edited by Cory Sekine-Pettite Images courtesy of Duncan G. Stroik, Architect, LLC. 20 |
Masonr yDesign
|
Winter 2014-15
Materials • Technolog y • Trends
w w w.masonr ydesignmaga zine.com
Winter 2014-15
|
Masonr yDesign
| 21
PROJECT SPOTLIGHT IT’S NOT EVERY DAY THAT ONE RECEIVES A CALL FROM A PRIEST REQUESTING ONE’S DESIGN SERVICES FOR A NEW CHURCH. But if that day comes, you’re certainly going to pick up the phone. That’s exactly what Duncan G. Stroik, Architect, LLC., did in 2012. According to the firm, the pastor of the Saint Paul the Apostle Catholic church in Spartanburg, S.C., was familiar with its award-winning work and wanted the firm to design a new place of worship for his growing congregation. Between June 2012 and December 2013, Duncan G. Stroik completed all of the design work and oversaw construction of the $8.2-million project. In the firm’s own words, this is how the new church came together.
The traditional style of the church extended beyond its aesthetic appearance and included the choice of building materials and construction method.
[BELOW]
The new Saint Paul the Apostle church is large enough to hold its congregation. No more masses in the school gym.
22 |
Masonr yDesign
|
Winter 2014-15
Saint Paul the Apostle Spartanburg, S.C., is a charming city of 37,000 residents and counts a large number of fine churches among its historic buildings. The downtown Catholic parish of Saint Paul the Apostle had by the mid-1990’s outgrown its small historic church built in 1883. For the past 20 years, the masses had been held in the school gymnasium. Thus, the pastor wanted a new church that would be large enough to accommodate his congregation – a facility designed to lift their hearts and minds to prayer. To build the larger church, the parish decided to take advantage of its urban location on a prominent site on East Main Street. The traditional design of the
Materials • Technolog y • Trends
Duncan G. Stroik, Architects, LLC Year the firm was established: 1990
Areas of practice: Ecclesiastical, civic, and residential architecture
Total number of staff: Principal, 5 architects, administrative staff
Awards/Recognition: The Palladio Award, Special Award, 2014, Cathedral of Saint Paul Organ Case. Saint Paul, Minn. Traditional Building magazine. Acanthus Award of Arete, 2013, Cathedral of Saint Joseph. Sioux Falls, S.D. Institute for Classical Architecture and Art, Chicago-Midwest Chapter. The Palladio Award for Renovation and Restoration, 2013, Cathedral of Saint Joseph. Sioux Falls, S.D. Traditional Building magazine.
[ABOVE]
Detail of one of the interior columns shows the intricacy of the carve work. new church reflects the universal Catholic faith and heritage, while also drawing specifically on Catholic architecture in the United States and the Lombard Romanesque tradition. The traditional style of the church extended beyond its aesthetic appearance and included the choice of building materials and construction method. A load-bearing masonry structure with a brick Romanesque exterior created a durable building that will serve the parish long into the future. The handsome red Flemish bond brick and limestone-trimmed faรงade is set back from the street to create an inviting gathering space in front of the church. A set of stairs rises to the Corinthian arched prothyron covering the entrance doors that are the threshold into the sacred space beyond. A limestone lunette above the entry contains a bas-relief carving of the conversion of Saint Paul. Statues of Saints Peter and Paul flank the entrance to the right and left, while a statue of the Blessed Virgin Mary looks on from a niche in the pediment above. A large circular window, limestone carvings of the four Evangelists, a w w w.masonr ydesignmaga zine.com
Henry Hering Memorial Medal: Art and Architecture Award, 2012, Shrine of Our Lady of Guadalupe. La Crosse, Wis. The National Sculpture Society. Honor Award, 2011, Our Lady of the Most Holy Trinity Chapel. Thomas Aquinas College, Santa Paula, Calif. American Institute of Architects, Northern Indiana. The Palladio Award, 2011, Our Lady of the Most Holy Trinity Chapel. Thomas Aquinas College, Santa Paula, Calif. Traditional Building magazine. Brick in Architecture Bronze Award, 2010, Saint Theresa Education Center. Sugar Land, Texas. The Brick Industry Association. Tucker Design Award, 2010, Our Lady of the Most Holy Trinity Chapel. Thomas Aquinas College, Santa Paula, Calif. Building Stone Institute.
Winter 2014-15
|
Masonr yDesign
| 23
PROJECT SPOTLIGHT row of intricate brick arches, and a painted metal Celtic cross surmounting the pediment, complete the façade. Materials A masonry structural system was selected for its durability, natural sustainability, and cost effectiveness. Based on two cost estimates, it was less expensive to build with masonry than it would have been to use structural steel. The aesthetic of the red brick Romanesque façade with limestone accents also was very appealing to the client. The marble used in the interior was concentrated in the sanctuary, which is the most important part of a church during the liturgy. Therefore, a higher-quality material was appropriate for that location. The structural system is made up of a brick cavity wall with CMU backup. Limestone detailing was used on the exterior of the church, as well as for the three carved statues of Paul, Peter, and Mary. Inside, marble was used for the main altar and baldacchino column pedestals, the altar for the tabernacle, two side altars, the sanctuary floor and steps, and the altar rail.
The marble used in the interior was concentrated in the sanctuary, which is the most important part of a church during liturgy.
[BELOW]
Marble was used extensively for the interior of the church.
24 |
Masonr yDesign
|
Winter 2014-15
Materials • Technolog y • Trends
[LEFT]
A limestone lunette above the entry contains a bas-relief carving of the conversion of Saint Paul.
By the Numbers Project scope: 1 8,000 sq-ft, 850 seats
Construction cost: $8.2 million Design challenges Duncan G. Stroik designed the brick layout for the building down to the last brick. Further, the architect designed the building with a load-bearing masonry structural system. After an initial cost estimate, the estimator suggested it would be cheaper to use a structural steel system. The architect re-designed the building using structural steel, including a revised brick layout. After a second cost estimate, however, it was discovered that the new system was actually more expensive, so the team decided to go back to structural masonry. During construction, it was difficult for the bricklayers to match the brick layout completed by the architect; the brick layout was more complex and precise than previous projects the contractor had completed. Several areas of installed brick had to be rebuilt during construction to match the architect’s details, such as the Flemish bond and the round window of the front façade. But in the end, it all came together beautifully. wMD
w w w.masonr ydesignmaga zine.com
Project Team Architect: Duncan G. Stroik, Architect, LLC, South Bend, Ind.
Construction Manager: Harper Corporation, Greenville, S.C.
Masonry Contractor: Gates Construction Co., Inc., Mooresville, N.C.
Winter 2014-15
|
Masonr yDesign
| 25
RESTORATION
STANDING THE TEST OF TIME Restored Astley Castle recipient of prestigious Riba Stirling Prize for Architecture By Cory Sekine-Pettite Credit: All photos courtesy of The Landmark Trust. CINTEC INTERNATIONAL, A LEADER IN THE FIELD OF STRUCTURAL MASONRY RETROFIT STRENGTHENING, REPAIR, AND PRESERVATION, reported recently that its patented anchors were used in the restoration of Astley Castle in Warwickshire, England. Following its renovations, Astley Castle was awarded the prestigious Riba Stirling Prize for Architecture. The castle dates back to the 13th century, and was on the verge of collapse following a fire in 1978. In the 1990s, the property came to the attention of The Landmark Trust, which vowed to restore the neglected castle. Today, it is used as a rental property for tourists. The Trust says of the landmark: “Groundbreaking modern accommodation has been inserted within the ruined walls of this ancient moated site to combine the thrill of modern architecture with the atmosphere of an ancient place.” 26 |
Masonr yDesign
|
Winter 2014-15
Materials • Technolog y • Trends
w w w.masonr ydesignmaga zine.com
Winter 2014-15
|
Masonr yDesign
| 27
RESTORATION According to the Trust, the site includes the moated castle, gateway and curtain walls, lake, a church, and the ghost of pleasure gardens in a picturesque landscape. In 2005, the Trust launched an open competition to find the best restoration plan that would create good, modern accommodation within the ancient ruins. The winning scheme, the Trust reports, by architects Mann Williams, maintains the sense of life and living within the castle, while making the most of the views – both into and out of the site. As The Landmark Trust explains: “After careful recording, those parts of the building beyond pragmatic repair were taken down. The new-build introduced also consolidates and ties together what could be saved of the original fabric as
The restored castle makes the most of available, natural light and provides breathtaking views.
28 |
Masonr yDesign
|
Winter 2014-15
Materials • Technolog y • Trends
[ABOVE]
Astley Castle is available as a vacation rental property. Visit landmarktrust.org.uk for info.
unobtrusively as possible, leaving the castle’s form in the landscape largely unchanged. There was further work on the wider setting, including repairs to the curtain walls and moat, and the 18th-century Gothic stable block. The historic parkland surrounding the moated site, much of which is a Scheduled Monument, has been opened up with public trails. The restoration Cintec teamed up with architects and engineers from Bathbased Mann Williams and Newport-based waterproofing engineers Protectahome to restore the castle. Cintec assisted Protectahome with the first phase of the nearly $4-million restoration, which included structural repairs and stabilizing the remaining walls of the building prior to rebuilding. Cintec’s patented anchors were used to stitch together and strengthen the walls. Protectahome was brought in to complete the initial stage of stabilizing the remaining walls of the listed building prior to restoration.
Cintec teamed up with architects and engineers from Bath-based Mann Williams and Newportbased waterproofing engineers Protectahome. w w w.masonr ydesignmaga zine.com
Winter 2014-15
|
Masonr yDesign
| 29
RESTORATION
It’s easy to see one’s family enjoying a meal around the table in this remarkable space.
30 |
Masonr yDesign
|
Winter 2014-15
Materials • Technolog y • Trends
According to the firm, its technicians installed more than 160 consolidation and stitching Cintec anchors, including two, 12-meter anchors. The process of restoring Astley Castle involved using a diamond drill to insert steel anchors into the building. Once in place, grout was pumped into a special sleeve surrounding the anchor, and air pumped out. Cores removed during this process were retained and reused where the anchors were installed, leaving an almost invisible repair. The work has ensured the survival of the original walls, allowing the award-winning holiday home to be built within the shell of the ancient castle. The Riba Stirling Prize is the UK’s most prestigious architectural award. Judging is based upon original, imaginative, and well-executed designs that excellently meet the needs of their users and inspire those who use and visit them. “The restoration work on Astley Castle was an impressive enterprise, as anyone who saw the castle prior to its transformation could have been forgiven for thinking it a hopeless ruin,” said Peter James, managing director of Cintec International said. “To be awarded the Riba Stirling Prize demonstrates the true extent of its transformation. It has now been turned into a structurally stable building that will stand the test of time and can be enjoyed by many people in its reincarnation as a holiday home.” Cintec anchors have been used to restore historically significant buildings across the globe, including Windsor Castle, the White House, and extensive work on Egypt’s pyramids.
“To be awarded the Riba Stirling Prize demonstrates the true extent of its transformation.” – Peter James
Astley Castle history The Landmark Trust provides an extensive history of the castle on its website. Here are a few excerpts: By the early 12th century, the castle was held by Philip de Estlega (Astley) from the Earl of Warwick. Philip’s grandson Thomas de Estleye was killed at the Battle of Evesham fighting with Simon de Montfort in 1265. The castle was crenellated [having open spaces at the top of a wall so that people can shoot guns and cannons outward] and moated in 1266, when it briefly changed hands before reverting to the Astleys. By 1420, the manor had passed through marriage to the Grey family and became entangled with the succession to the throne of England. It was under the Greys in the late 15th century that the castle achieved its most mature form. However, after the death of Edward VI in July 1553, Henry Grey, Duke of Suffolk seized the initiative and placed his daughter, Lady Jane Grey, on the throne. Jane’s reign lasted just nine days, before Mary I’s superior claims prevailed. Both Jane and later her father were beheaded for treason – Lord Grey rebelled a second time in January 1554 and was captured in a hollow oak tree at Astley. In 1600, the castle was bought by Sir Edward Chamberlain. The Chamberlains restored the church and improved the castle. During the Civil War in the 1640s, Astley became a garrison for Parliamentary soldiers. In 1674, it was bought by the Newdigate family, who owned the neighboring Arbury Estate, and the castle became a subsidiary dwelling. In the 1770s, a Sir John Astley leased the castle briefly and was responsible for the construction of the stables and coach house. Requisitioned during World War II for convalescing service men, a dilapidated Astley Castle was restored by the Tunnicliffes in the 1950s as a hotel. The castle completed its slide from grace when it was gutted by a mysterious fire in 1978, just days after its lease had expired. Vandalism, unauthorized stripping out, and collapse made its plight still worse. For many years, no solution could be found to give it a future and Astley Castle became a ruin. By 2007, English Heritage had listed it as one of the 16 most endangered sites in Britain. wMD w w w.masonr ydesignmaga zine.com
Winter 2014-15
|
Masonr yDesign
| 31
Supplies | Air, Vapor, & Water Barriers As defined by the Air Barrier Association of America, air barrier systems are comprised of a number of materials which are assembled together to provide a complete barrier to air leakage through the building enclosure. This system essentially “wraps” the building shell and ensures that it protects the building from the effects of air leakage. Air leakage can have detrimental effects on how a building functions and reduces the life span of a building.
Get Your Products Featured! The Spring 2015 Supplies section will feature brick, block, and stone. Send your product descriptions and images to Cory Sekine-Pettite at cory@lionhrtpub.com.
1
1 Enverge™ Air and Vapor Barrier http://firestonebpco.com
Firestone Building Products’ Enverge Air and Vapor Barrier is an asphalt-based, self-sealing wall barrier that provides energy savings and contributes to better air quality for building occupants. According to the manufacturer, this system offers the following advantages: • Reflective facer provides energy savings • Self-sealing barrier • Consistent membrane thickness • Minimizes drafts and reduces moisture to guard against mold • Meets or exceeds ASTM D5602, D1876, D903, E283, E96, and E330. Installation considerations include: • Surface must be primed with an Enverge primer • Remove the release liner at a 45° angle in 3” increments to promote correct alignment and installation continuity • The membrane should be firmly rolled from the center to the outside for maximum adhesion • Seams should overlap a minimum of 2” for effective coverage • Self-seals around mechanical fasteners and minimizes air leakage around open gaps; foil flashing tape can also be used to seal penetrations.
2 Driwall™ Rainscreen
http://www.keenebuilding.com
Keene Building’s Driwall Rainscreen system is a drainage mat for exterior wall systems. The entangled net product eliminates incidental moisture problems in most exterior veneer applications, including stucco, manufactured stone, and plank siding. Driwall Rainscreen is produced from an extruded polymer matrix of tangled monofilaments. The three-dimensional mat is heat-laminated to a non-woven lightweight, breathable fabric to provide a separation from cementitious sidings. The monofilaments are heat-welded at the junctions to form a structure that spaces exterior veneer away from the inner sheathing.
2
Features and benefits of the system, according to Keene, include the following: • Drainage of excess moisture and ventilation in one product • Lightweight and easy to handle • Simple installation with mechanical staple hammer • Polymer core resistant to most known corrosive chemicals, including solvents • Wide rolls for fewer seams • Core absorbs and releases no moisture • Provides no source for the promotion of mold, mildew or bacteria. 32 |
Masonr yDesign
|
Winter 2014-15
Materials • Technolog y • Trends
® 3 RainBarrier Continuous Insulation
3
http://thermafiber.com
Thermafiber RainBarrier products from Owens Corning are designed for exceptional performance in rain screen and cavity wall construction applications. New RainBarrier HD & RainBarrier 45 provide energy-saving continuous insulation (ci), fire protection, and acoustical control while efficiently draining water from a wall cavity system. RainBarrier products are non-combustible and compatible with common wall ties and air barrier systems. According to the manufacturer, RainBarrier has several distinct advantages over other insulation products in these types of construction: 1. Non-combustible and fire resistant. RainBarrier can withstand temperatures over 2,000°F for over 5 hours. In the event of a fire, mineral wool will not burn or release toxic smoke and gasses. 2. Sustainability. Available with a minimum 70% recycle content. No CFC or HCFC blowing agents. Energy saving R-value of 4.2 per inch of thickness. 3. Permeable. In a vapor permeable system, RainBarrier allows the building to breathe as it is designed without sacrificing R-value. In a nonpermeable system, RainBarrier allows the vapor barrier to perform without creating additional traps for moisture in the wall cavity. 4. UV resistant. RainBarrier is ideal for use in open joint systems where UV rays can degrade other insulations. 5. Easy to fabricate and install. Semi-rigid mineral wool can conform to jobsite irregularities much better than rigid insulations to ensure a continuous thermal barrier.
4 PROSOCO R-Guard Spray Wrap MVP
®
www.prosoco.com PROSOCO R-Guard® Spray Wrap MVP is a fluid-applied air and water-resistive barrier that stops air and water leakage in cavity wall, masonry veneer construction, as well as in stucco, EIFS and most other building wall assemblies. Once on the substrate, the easily applied liquid quickly dries into a rubberized, highly durable, water-resistant, vapor-permeable membrane. Use Spray Wrap MVP as a high-performing, water-resistive barrier or as part of a continuous, building-wide air barrier system. The durable membrane conforms and adheres to common building surfaces and is compatible with most paints, sealants, and self-adhered waterproofing or air barrier components. It is appropriate for vertical, above-grade applications to exterior sheathing, CMU, cast concrete, and most other common building materials. wMD w w w.masonr ydesignmaga zine.com
advertiser’s index page#
company-phone-website
C2 Amerimix 888.313.0755 www.amerimix.com
1 Mortar Net Solutions
800.664.6638 www.mortarnet.com
18-19 SPEC MIX, Inc. 888.773.2649 www.specmix.com
11 Tradesmen’s Software
800.494.4899 www.tradesmens.com
29 Masonry Cosmetics, Inc.
888.698.8705 www.masonrycosmetics.com
Winter 2014-15
|
Masonr yDesign
| 33