Product overview
ADDITIVES
Gasoline additives Marine Gasoline Stabilizer Shooter Preserves and protects gasoline against aging and oxidation. Prevents corrosion throughout the fuel system and ensures no problems arise when decommissioning the engine. Damage in storage can be prevented with a modern, ash-free combination of agents. Intended use: For all 2-stroke and 4-stroke gasoline engines for storage and preservation. Also suitable for long-term use in seldom-used engines. The can is sufficient for 70 liters (18 gal.) of fuel. Can be mixed with the fuel at any time. Minimum fuel filling of 50 liters (13 gal.) is requested for optimum product performance.
6.7 FL OZ / 200 mL, Part no. 25100 EN
ADDITIVES
Marine 4T Shooter Highly effective combination of cleaning and preserving additives for 4-stroke gasoline engines. Removes deposits on injection valves, intake valves, spark plugs and in the combustion chamber and prevents new deposits from forming. For a smoother running engine Eliminates starting problems and rough engine running. Preserves and protects the entire fuel system against wear, deposits and corrosion. Clean engines use less fuel and emit fewer pollutants. Intended use: For all types of gasoline injection systems and carburetors. For adding to fuel tanks to deal with and prevent problems. The can is sufficient for 70 liters (18 gal.) of fuel. Can be mixed with the fuel at any time. Minimum fuel filling of 50 liters (13 gal.) is requested for optimum product performance.
6.7 FL OZ / 200 mL, Part no. 25102 EN
ADDITIVES
Diesel additives Marine Super Diesel Additive A combination of agents which cleans, disperses, protects components and boosts the cetane number. The enhanced ignition performance improves the combustion of the fuel which in turn reduces emissions. The high proportion of corrosion protection additives reliably protects the entire fuel system from the formation of rust and corrosion. Due to its outstanding cleaning properties, the components remain clean and deposits are removed. The engine performance remains at a consistently high level." Intended use: For all diesel engines in the marine sector, including pumped-jet and common rail injection systems. Fully compatible with all conventional diesel and biodiesel fuels.
16.9 FL OZ / 500 mL, Part no. 20550 EN 33.8 FL OZ / 1 L, Part no. 20552 EN 16.9 FL OZ / 500 mL, Part no. 20526 EN-FR
WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov
MOTOR OILS
Motor Oils Marine 4T Motor Oil SAE 10W-30 Fully synthetic, high-performance low-friction motor oil with specially formulated marine additives for increased protection against corrosion and better protection properties. Provides fast penetration of the oil to the engine and turbocharger. With optimum wear protection. Exceeds leading engine manufacturers' requirements. Fulfills warranty cover provided by manufacturers who require NMMA FC-W® approval. Intended use: High-performance low-friction motor oil for inboard and outboard engines. Approved by NMMA FC-W® certification for engines by Evinrude, Honda, Johnson, Mercury, Suzuki, Tohatsu and Yamaha. Specifications and approvals: API SL, NMMA FC-W®
1.06 U.S. QT / 1 L, Part no. 20520 EN-FR 4.23 U.S. QT / 4 L, Part no. 20522 EN-FR 21.13 U.S. QT / 20 L, Part no. 20495 EN-FR 63.40 U.S. QT / 60 L, Part no. 25025 DE-EN 216.62 U.S. QT / 205 L, Part no. 25074 DE-EN
MOTOR OILS
Motor Oils Marine 4T Motor Oil SAE 25W-40 Mineral-based high-performance motor oil with specially formulated marine additives. Even under extreme operating conditions, it provides for a stable lubricating film. Keeps engine seals, such as shaft sealing rings and valve stem seals, flexible and provides for minimal oil consumption. Meets leading engine manufacturers' requirements. Fulfills warranty cover provided by manufacturers who require NMMA FC-W® approval. Intended use: Multi-purpose motor oil for inboard and outboard engines. Approved by NMMA FC-W® certification for engines by Evinrude, Honda, Johnson, Mercury, Suzuki and Tohatsu. Specifications and approvals: API SL, NMMA FC-W®
1.06 U.S. QT / 1 L, Part no. 20546 EN-FR 4.23 U.S. QT / 4 L, Part no. 20548 EN-FR 21.13 U.S. QT / 20 L, Part no. 20499 EN-FR 63.40 U.S. QT / 60 L, Part no. 25029 DE-EN 216.62 U.S. QT / 205 L, Part no. 25057 DE-EN
MOTOR OILS
Marine 4T Motor Oil SAE 25W-50 Mineral-based high-performance motor oil with specially formulated marine additives. Even under extreme operating conditions, it provides for a stable lubricating film. Keeps engine seals, such as shaft sealing rings and valve stem seals, flexible and provides for minimal oil consumption. Meets leading engine manufacturers' requirements. Intended use: Multi-purpose motor oil for inboard and outboard engines. LIQUI MOLY recommends this oil particularly for Mercury verado and high performance marine engines. Specifications and approvals: API SL, NMMA FC-W® WARNING: Reproductive Harm - www.P65Warnings.ca.gov
1.06 U.S. QT / 1 L, Part no. 22508 EN 4.23 U.S. QT / 4 L, Part no. 22510 EN
MOTOR OILS
Motor Oils Marine 4T Motor Oil SAE 10W-40 Fully synthetic, high-performance low-friction motor oil with the latest additive technology. Ensures outstanding wear protection and engine cleanliness. Optimum protection of engine components due to high content of corrosion protection additives. Specially developed for the maritime sector. Meets leading engine manufacturers' requirements. Tested for use with catalytic converters and turbochargers. Intended use: For gasoline and diesel engines in the marine sector. Particularly suitable for marine engines operating under extreme demands. Specifically formulated for Volvo Penta engines. Specifications and approvals: ACEA A3, ACEA B4, ACEA E7, API SL, API CI-4, Mack EO-N, Renault Trucks RLD-2, Volvo VDS-3 LIQUI MOLY recommends this product for vehicles that needs to comply the following specifications: Caterpillar ECF-1-a, Caterpillar ECF-2, Cummins CES 20071, Cummins CES 20072, Cummins CES 20076, Cummins CES 20077, Cummins CES 20078, Deutz DQC III-10, MAN M 3275-1, MTU Typ 2
1.06 U.S. QT / 1 L, Part no. 20506 EN-FR 4.23 U.S. QT / 4 L, Part no. 20508 EN-FR 21.13 U.S. QT / 20 L, Part no. 20496 EN-FR 63.40 U.S. QT / 60 L, Part no. 20497 EN-FR 216.62 U.S. QT / 205 L, Part no. 20498 EN-FR
MOTOR OILS
Marine 2T DFI Motor Oil Semi-synthetic high-performance 2-stroke motor oil specially developed for the marine sector. Specially aligned to the high demands of the latest generation of direct injection engines. Ensures optimum lubrication even at high operating temperatures and ensures maximum motor and piston cleanliness. Low-fuming combustion. With TC-W3 performance. Intended use: Recommended and tested for Evinrude E-Tec as well as Mercury DFI-2-stroke motors. Also outstandingly suitable for all other 2-stroke and DFI 2-stroke engines. Suitable for mixed and separate lubrication. Specifications and approvals: NMMA TC-W3®. LIQUI MOLY recommends this product for vehicles that needs to comply the following specifications: Evinrude E-Tec Engines, ISO L-EGC, ISO L-EGD, JASO FC, JASO FD, Mercury DFI 2 stroke Engines
4.23 U.S. QT / 4 L, Part no. 20518 EN-FR 21.13 U.S. QT / 20 L, Part no. 20494 EN-FR
MOTOR OILS
Motor oils Marine PWC Oil SAE 10W-40 Fully synthetic based 4-stroke motor oil for superior performance and engine longevity in high-performance PWC´s. The special additive combination ensures maxiumum wear protection, best possible lubrication, outstanding engine cleaningless and excellent friction values for the wet-clutch system even at constant high rpm´s. Meets or even exceeds the requirements of leading engine manufacturers. Intended use: Fully synthetic based 4-stroke motor oil for PWC´s. Suitable for turbo- and supercharged engines, with and without a wetclutch system. Miscible with most commercially motor oils of the same specification. Always observe the manufacturers instructions. Specifications and approvals: API SN Plus, JASO MA2 LIQUI MOLY recommends this product for vehicles that needs to comply the following specifications: Honda, Kawasaki, SeaDoo, Suzuki, Yamaha
1.06 U.S. QT / 1 L, Part no. 20528 EN-FR 4.23 U.S. QT / 4 L, Part no. 20530 EN-FR
GEAR OILS
Gear oils Marine High Performance Gear Oil SAE 85W-90 Special high-performance gear lube for the maritime sector. With unique package of additives that guarantees outstanding wear protection even in the case of contamination with water. Stable under extreme pressures even under high stresses and at high speeds. Its outstanding corrosion protection and very good oxidation resistance make it perfect for maritime applications. Prevents oil sludge and deposits even under higher operating temperatures. Intended use: Meets the requirements of common transmission manufacturers in the marine sector. Specially suited for the use in Mercury outboard motors as of 75 hp output as well as numerous other Marine Gear Cases and Sterndrive racing applications. Can be used as a replacement for a high-performance gear lube with viscosity SAE 90.
1.06 U.S. QT / 1 L, Part no. 20536 EN-FR 21.13 U.S. QT / 20 L, Part no. 20492 EN-FR 63.40 U.S. QT / 60 L, Part no. 20493 EN-FR
GEAR OILS
Gear Oils Marine Fully Synthetic Gear Oil GL4/GL5 SAE 75W-90 Fully synthetic high-performance gear oil with a high performance formulation. Ensures accurate function of the transmission even under extreme operating conditions and when exposed to large temperature fluctuations. Outstanding protection against corrosion and wear. Reduces transmission noise. Intended use: For marine transmissions where a lubricant according to API GL4/GL5 is required. Also suitable for drive wheels of different categories and reverse gears. Exceeds the highest test requirements of well-known transmission manufacturers. Specifications and approvals: API GL4/5, API MT-1. LIQUI MOLY recommends this product for vehicles that needs to comply the following specifications: ZF TE-ML 02B, ZF TE-ML 05A, ZF TE-ML 12L, ZF TE-ML 12N, ZF TE-ML 16F, ZF TE-ML 17B, ZF TE- ML 19C, ZF TE-ML 21A
1.06 U.S. QT / 1 L, Part no. 20538 EN-FR 21.13 U.S. QT / 20 L, Part no. 20491 EN-FR
GEAR OILS
Marine ATF Fully synthetic ATF oil specially developed for the marine sector. Offers increased corrosion protection and minimizes wear compared with conventional ATF oils. The high thermal stability and excellent protective properties give it optimum resistance to aging with maximum safety reserves. Compatible with all sealing materials. Intended use: For drives and transmissions such as reverse gears, power steering, control systems, trimming systems, hydrostatic transmission ratios and hydraulic and mechanical systems that require the use of an ATF oil. Cannot be used where GL4 or GL5 oils are specified. Specifications and approvals: Dexron II D, Dexron II E, Dexron III G, Dexron III H, Dexron TASA (Typ A/Suffix A) LIQUI MOLY recommends this product for vehicles that needs to comply the following specifications: Allison C4, ZF TE-ML 02F, ZF TE-ML 03D, ZF TE- ML 04D, ZF TE-ML 11B, ZF TE-ML 14A, ZF TE-ML 14B WARNING: Cancer - www.P65Warnings.ca.gov
1.06 U.S. QT / 1 L, Part no. 20544 EN-FR
GREASES
Greases Marine Winch Grease Synthetic high-performance grease with PTFE solid lubricants specially developed for all kinds of winching and hoisting applications. The solid lubricant provides the ultimate in wear protection and reduces friction. Resistant to seawater and freshwater with excellent adhesive properties. Does not contain resins or acids.
NET WT. 3.5 OZ / 100 g, Part no. 20524 EN-FR
Intended use: Ideally suited for winching and hoisting applications with non-ferrous metal pairings and plastic/metal pairings. Powerful adhesive properties and neutral in respect of harmful environmental factors.
Marine Grease Heavy-duty grease for many of the lubrication points in the maintenance of vessels. Reduces friction and wear. Extremely long-lasting lubrication properties. Excellent aging and shear stability, and resistant to hot and cold water. Water-repellent and totally impervious to saltwater. Meets the requirements of NATO Marine Specification G460. Resistant in wet environments and provides excellent sealing properties. Labeling according to DIN 51502. KPF2G-20.
NET WT. 8.8 OZ / 250 g, Part no. 20540 EN-FR NET WT. 14.1 OZ / 400 g, Part no. 20542 EN-FR
Intended use: Versatile product for use on grease points across all marine needs. Can also be used for exterior components which are exposed to salty air and seawater.
WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov
For more information visit our website: www.liqui-moly.us
LIQUI MOLY USA, INC. 1801 E Edinger Ave. #255A Santa Ana, CA 92705 E-mail: info@liquimoly.us www.liqui-moly.us For further information or technical support please call 1-888-MOLYOIL (665-9645) support@liqui-moly.com No liability for misprints. Subject to technical modifications.
LIQUI MOLY app - The quick way to find the right oil! liqui-moly.to/AppStore liqui-moly.to/PlayStore
Like us on Facebook and/or Instagram: http://www.facebook.com/LIQUIMOLYUSA https://www.instagram.com/liquimoly.usa.canada/
514972004
With best regards: