Catalogue Promo LINK by Lomoutil

NET PRICES VAT EXCLUDED - UNTIL 31.07.16

We work every day to offer our customers the best solutions to improve their processes and to make their work easier. In our brands you can find: Quality, Competence and Technology. You can find the experience and the value of the people behind that. Highlight Technology is a selection of our high performance products. A commercial proposal designed to meet specific customer demands. Link Innovate Your Industry.

DRILLS TAPs end MILLS TURNING indexable tools

03 MACHINING TOOLS

MILLING indexable tools COLLET SETs CHUCKS

Calipers Micrometers

33 Metrology

indicators Height gauges Measuring machines

tool Cabinets Service Tool cases tool sets

43 MRO

pneumatic tools Abrasives WORKBENCHes

ASPIRATORS TRAMP OIL SEPARATORS

lubricants 55 and machinery

67 HAndling

CUTTING OILS MINERAL FLUIDS LUBRICANT SPRAYS

cranes Hoists magnets

DRILLS TAPs end MILLS TURNING indexable tools MILLING indexable tools COLLET SETs CHUCKS

MACHINING TOOLS

High performance geometry for high penetration rates

Premium sub micron grain carbide

Advanced technology provides accurate hole sizing

Code

€

Pcs

A00053 A00053,3 A00053,5 A00054 A00054,2 A00054,5 A00055 A00055,5 A00056 A00056,5 A00056,8 A00057

19.80 19.80 19.80 19.80 19.80 19.80 19.80 19.80 19.80 24.50 24.50 24.50

1 1 1 1 1 1 1 1 1 1 1 1

D mm 3.00 3.30 3.50 4.00 4.20 4.50 5.00 5.50 6.00 6.50 6.80 7.00

NET PRICES VALID UNTIL 31.07.2016 (VAT EXCLUDED)

d2 mm 6 6 6 6 6 6 6 6 6 8 8 8

I mm 20 20 20 24 24 24 28 28 28 37 37 37

L mm 62 62 62 66 66 66 66 66 66 79 79 79

A0005

Code

€

Pcs

3xD

A0005

3xD

APPLICATION Machining of short or long chip materials. Recommended for machining carbon steel up to 1100 N/mm² and austenitic stainless steel.

A00057,5 A00058 A00058,5 A00059 A00059,5 A000510 A000510,2 A000510,5 A000511 A000511,5 A000512 A000512,5 A000513

24.50 24.50 29.00 29.00 29.00 29.00 44.00 44.00 44.00 44.00 44.00 58.50 58.50

1 1 1 1 1 1 1 1 1 1 1 1 1

D mm 7.50 8.00 8.50 9.00 9.50 10.00 10.20 10.50 11.00 11.50 12.00 12.50 13.00

d2 mm 8 10 10 10 10 10 12 12 12 12 12 14 14

I mm 41 47 47 47 47 47 55 55 55 55 55 60 60

L mm 79 89 89 89 89 89 102 102 102 102 102 107 107

MACHINING TOOLS

Reinforced shank Durable coating 140° Point angle

Internal coolant holes

Code

€

Pcs

A00073 A00073,3 A00073,5 A00074 A00074,2 A00074,5 A00075 A00075,5 A00076 A00076,5 A00076,8 A00077

24.00 24.00 24.00 24.00 24.00 24.00 24.00 24.00 24.00 29.00 29.00 29.00

1 1 1 1 1 1 1 1 1 1 1 1

D mm 3.00 3.30 3.50 4.00 4.20 4.50 5.00 5.50 6.00 6.50 6.80 7.00

d mm 6 6 6 6 6 6 6 6 6 8 8 8

I mm 28 28 28 36 36 36 44 44 44 53 53 53

L mm 66 66 66 74 74 74 82 82 82 91 91 91

A0007

Code

€

Pcs

5xD

A0007

5xD

APPLICATION Short or long chip machining of materials. Recommended for machining carbon steel up to 1100 N/mm² and austenitic stainless steel.

A00077,5 A00078 A00078,5 A00079 A00079,5 A000710 A000710,2 A000710,5 A000711 A000711,5 A000712 A000712,5 A000713

29.00 29.00 34.00 34.00 34.00 34.00 51.00 51.00 51.00 51.00 51.00 62.00 62.00

1 1 1 1 1 1 1 1 1 1 1 1 1

D mm 7.50 8.00 8.50 9.00 9.50 10.00 10.20 10.50 11.00 11.50 12.00 12.50 13.00

d mm 8 8 10 10 10 10 12 12 12 12 12 14 14

I mm 53 53 61 61 61 61 71 71 71 71 71 77 77

L mm 91 91 103 103 103 103 118 118 118 118 118 124 124

NET PRICES VALID UNTIL 31.07.2016 (VAT EXCLUDED)

MACHINING TOOLS

Especially indicated for automatic lathes and NC machines

High Quality drilling GEOMETRY Parabolic helix design with wide flutes to provide optimal chip evacuation, self centring point geometry. POINT ANGLE 130° SURFACE TREATMENT TiAlN (coated)

APPLICATION Aluminum and copper alloys, soft bronze, electrolyte copper and hardened brass.

Code

€

Pcs

A10601 A10601,5 A10601,6 A10601,9 A10602 A10602,5 A10603 A10603,3 A10603,5 A10604 A10604,2 A10604,5 A10605 A10605,5 A10606 A10606,5 A10606,8 A10607 A10607,5 A10608 A10608,5 A10609

2.50 2.80 3.10 2.80 2.80 3.10 2.80 3.30 3.90 4.00 4.10 4.20 4.40 5.00 6.60 6.70 7.00 7.30 8.00 8.10 8.80 9.60

1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1

D H8 mm 1.00 1.50 1.60 1.90 2.00 2.50 3.00 3.30 3.50 4.00 4.20 4.50 5.00 5.50 6.00 6.50 6.80 7.00 7.50 8.00 8.50 9.00

NET PRICES VALID UNTIL 31.07.2016 (VAT EXCLUDED)

l mm 6 9 10 11 12 14 16 18 20 22 22 24 26 28 28 31 34 34 34 37 37 40

L mm 26 32 34 36 38 43 46 49 52 55 55 58 62 66 66 70 74 74 74 79 79 84

A1060

Code

€

Pcs

HELIX FS/R

A1060

HELIX FS/R

Best Performances on long chip materials A10609,5 A106010 A106010,5 A106011 A106011,5 A106012 A106012,5 A106013 A106013,5 A106014 A106014,5 A106015 A106015,5 A106016 A106016,5 A106017 A106017,5 A106018 A106018,5 A106019 A106019,5 A106020

10.30 11.20 12.50 13.60 14.30 15.70 18.10 18.90 18.90 18.70 19.70 25.30 25.90 26.80 40.00 42.20 44.30 45.30 49.70 50.10 55.00 50.10

1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1

D H8 mm 9.50 10.00 10.50 11.00 11.50 12.00 12.50 13.00 13.50 14.00 14.50 15.00 15.50 16.00 16.50 17.00 17.50 18.00 18.50 19.00 19.50 20.00

l mm 40 43 43 47 47 51 51 51 54 54 56 56 58 58 60 60 62 62 64 64 66 66

L mm 84 89 89 95 95 102 102 102 107 107 111 111 115 115 119 119 123 123 127 127 131 131

MACHINING TOOLS

TWO Operations ONE tool

High Performance

in H7 Tolerance Drilling

High cutting Conditions l1

GEOMETRY Advanced helix geometry POINT ANGLE 140° SURFACE TREATMENT Durable (coated)

€

Pcs

3 x D

A009004 A009005 A009006 A009007 A009008 A009009

76.00 76.00 76.00 79.00 79.00 89.00

1 1 1 1 1 1

A0090

Code

€

Pcs

A009504 A009505 A009506 A009507 A009508 A009509

98.00 98.00 98.00 115.00 118.00 139.00

1 1 1 1 1 1

D H7 mm 4 5 6 7 8 9

d mm 6 6 6 8 8 10

l mm 20 20 20 24 24 35

l1 mm 28 28 28 34 34 47

L mm 66 66 66 79 79 89

D H7 mm 4 5 6 7 8 9

d mm 6 6 6 8 8 10

l mm 35 35 35 43 43 49

l1 mm 44 44 44 53 53 61

L mm 82 82 82 91 91 103

A0090

Code

€

Pcs

3 x D

Code

A009010 A009011 A009012 A009013 A009014 A009015 A009016

89.00 115.00 125.00 175.00 178.00 225.00 228.00

1 1 1 1 1 1 1

A0090

Code

€

Pcs

5xD

A0090

5xD

APPLICATION Machining of drilling and reaming with H7 tolerance in one pass. Perfect on die and mold steels. Can be used on carbon steels alloy, cast iron, titanium alloy and aerospace alloy.

A009510 A009511 A009512 A009513 A009514 A009515 A009516

139.00 199.00 199.00 248.00 248.00 335.00 335.00

1 1 1 1 1 1 1

D H7 mm 10 11 12 13 14 15 16

d mm 10 12 12 14 14 16 16

l mm 35 40 40 43 43 45 45

l1 mm 47 55 55 60 60 65 65

L mm 89 102 102 107 107 115 115

D H7 mm 10 11 12 13 14 15 16

d mm 10 12 12 14 14 16 16

l mm 49 56 56 60 60 63 63

l1 mm 61 71 71 77 77 83 83

L mm 103 118 118 124 124 133 133

NET PRICES VALID UNTIL 31.07.2016 (VAT EXCLUDED)

MACHINING TOOLS

For any kind of thread machining SURFACE FINISH Bright

TOLERANCE 6H ISO 2

Extended Tool Life NO chipping on cutting edges

DIN 371

ISO thread DIN 13 coarse pitch THREAD DEPTH < 2XD HOLE TYPE Through EXECUTION B 4/5

A2020

Code

€

Pcs

A2020M2 A2020M2,5 A2020M3 A2020M4 A2020M5 A2020M6 A2020M8 A2020M10

10.00 8.00 7.00 7.00 7.00 8.00 9.00 10.00

10 10 10 10 10 10 10 10

APPLICATION Low and medium resistance steel ≤ 800N/mm²

dxp mm 2 x 0.4 2.5 x 0.45 3 x 0.5 4 x 0.7 5 x 0.8 6x1 8 x 1.25 10 x 1.5

L mm 45 50 56 63 70 80 90 100

l mm 8 9 10 12 14 16 18 20

d3 mm 2.8 2.8 3.5 4.5 6 6 8 10

s mm 2.1 2.1 2.7 3.4 4.9 4.9 6.2 8

Tapping hole mm 1.6 2.05 2.5 3.3 4.2 5 6.8 8.5

l mm 6 6.5 7 8.5 10 12 15 17.5

d3 mm 2.8 2.8 3.5 4.5 6 6 8 10

s mm 2.1 2.1 2.7 3.4 4.9 4.9 6.2 8

Tapping hole mm 1.6 2.05 2.5 3.3 4.2 5 6.8 8.5

DIN 371

ISO thread DIN 13 coarse pitch THREAD DEPTH < 2.5XD HOLE TYPE Blind EXECUTION C 2/3

APPLICATION Low and medium resistance steel ≤ 800N/mm²

NET PRICES VALID UNTIL 31.07.2016 (VAT EXCLUDED)

A2040

Code

€

Pcs

A2040M2 A2040M2,5 A2040M3 A2040M4 A2040M5 A2040M6 A2040M8 A2040M10

9.00 9.00 7.00 8.00 8.00 8.00 9.00 11.00

10 10 10 10 10 10 10 10

dxp mm 2 x 0.4 2.5 x 0.45 3 x 0.5 4 x 0.7 5 x 0.8 6x1 8 x 1.25 10 x 1.5

L mm 45 50 56 63 70 80 90 100

MACHINING TOOLS

For a wide range of materials SURFACE FINISH Steam tempering

Universal and multipurpose Tap

TOLERANCE 6H ISO 2

Back tapered for easy wayout

DIN 371

ISO thread DIN 13 coarse pitch THREAD DEPTH < 2XD HOLE TYPE Through EXECUTION B 4/5

A2110

Code

€

Pcs

A2110M2 A2110M2,5 A2110M3 A2110M4 A2110M5 A2110M6 A2110M8 A2110M10

12.00 10.00 9.00 9.00 10.00 10.00 11.00 14.00

10 10 10 10 10 10 10 10

APPLICATION Low and medium resistance steel ≤ 800N/mm²

dxp mm 2 x 0.4 2.5 x 0.45 3 x 0.5 4 x 0.7 5 x 0.8 6x1 8 x 1.25 10 x 1.5

L mm 45 50 56 63 70 80 90 100

l mm 8 9 10 12 14 16 18 20

d3 mm 2.8 2.8 3.5 4.5 6 6 8 10

s mm 2.1 2.1 2.7 3.4 4.9 4.9 6.2 8

Tapping hole mm 1.6 1.9 2.5 3.3 4.2 5 6.8 8.5

l mm 5 5 5 5 6.5 7 7 11

d3 mm 2.8 2.8 3.5 4.5 6 6 8 10

s mm 2.1 2.1 2.7 3.4 4.9 4.9 6.2 8

Tapping hole mm 1.6 2.05 2.5 3.3 4.2 5 6.8 8.5

DIN 371

ISO thread DIN 13 coarse pitch THREAD DEPTH < 2.5XD HOLE TYPE Blind EXECUTION C 2/3 back-tapered

APPLICATION Low and medium resistance steel ≤ 800 N/mm²

A2120

Code

€

Pcs

A2120M2 A2120M2,5 A2120M3 A2120M4 A2120M5 A2120M6 A2120M8 A2120M10

12.00 15.00 10.00 10.00 10.00 10.00 12.00 15.00

10 10 10 10 10 10 10 10

dxp mm 2 x 0.4 2.5 x 0.45 3 x 0.5 4 x 0.7 5 x 0.8 6x1 8 x 1.25 10 x 1.5

L mm 45 50 56 63 70 80 90 100

NET PRICES VALID UNTIL 31.07.2016 (VAT EXCLUDED)

MACHINING TOOLS

Perfect on stainless steel Internal coolant holes

Best choice on High-End solution

SURFACE FINISH TINOX + (coated)

Manufactured in premium HSSE

TiNOX+

DIN 376

DIN 371

TOLERANCE 6H ISO 2 THREAD DEPTH ≤ 2XD HOLE TYPE Through EXECUTION B 4/5

A2226

Code

€

ISO thread DIN 13 coarse pitch

A2226M3 A2226M4 A2226M5 A2226M6 A2226M8 A2226M10 A2226M12 A2226M14 A2226M16

19.50 21.00 21.00 21.50 22.80 28.50 35.40 48.60 56.50

APPLICATION Stainless steel with Rm < 1400 N/mm²

TiNOX+

dxp mm 3 x 0.5 4 x 0.7 5 x 0.8 6x1 8 x 1.25 10 x 1.5 12 x 1.75 14 x 2 16 x 2

L mm 56 63 70 80 90 100 110 110 110

l mm 10 12 14 16 18 20 25 28 28

d3 mm 3.5 4.5 6 6 8 10 9 11 12

s mm 2.7 3.4 4.9 4.9 6.2 8 7 9 9

Tapping hole mm 2.5 3.3 4.2 5 6.8 8.5 10.3 12 14

d3 mm 3.5 4.5 5 5 8 10 9 11 12

s mm 2.7 3.4 4.9 4.9 6 8 7 9 9

Tapping hole mm 2.5 3.3 4.2 5 6.8 8.5 10.3 12 14

DIN 376

DIN 371

ISO thread DIN 13 coarse pitch

THREAD DEPTH ≤ 3XD HOLE TYPE Blind EXECUTION C 2/3

APPLICATION Stainless steel with R < 1400 N/mm²

NET PRICES VALID UNTIL 31.07.2016 (VAT EXCLUDED)

A2227

Code

€

TOLERANCE 6H ISO 2 A2227M3 A2227M4 A2227M5 A2227M6 A2227M8 A2227M10 A2227M12 A2227M14 A2227M16

19.50 21.00 21.00 21.50 22.80 28.50 35.40 48.60 56.50

dxp mm 3 x 0.5 4 x 0.7 5 x 0.8 6x1 8 x 1.25 10 x 1.5 12 x 1.75 14 x 2 16 x 2

L mm 56 63 70 80 90 100 110 110 110

l mm 5 7 8 10 13 15 18 20 20

MACHINING TOOLS

Last release in coating

technology

TiNOX+ DIN 376

DIN 371

ISO thread DIN 13 coarse pitch

THREAD DEPTH ≤ 2XD HOLE TYPE Through EXECUTION B 4/5 with lubrication radials hole

APPLICATION Stainless steel with Rm < 1400N/mm²

A2228

Code

TOLERANCE 6H ISO 2

A2228M6 A2228M8 A2228M10 A2228M12 A2228M14 A2228M16

dxp mm 59.00 6x1 65.00 8 x 1.25 69.00 10 x 1.5 89.00 12 x 1.75 128.00 14 x 2 139.00 16 x 2

€

L mm 80 90 100 110 110 110

l mm 16 18 20 25 28 28

d3 mm 6 8 10 9 11 12

s mm 4.9 6.2 8 7 9 9

Tapping hole mm 8 6.8 8.5 10.3 12 14

d3 mm 6 8 10 9 11 12

s mm 4.9 6.2 8 7 9 9

Tapping hole mm 5 6.8 8.5 10.3 12 14

TiNOX+ DIN 376

DIN 371

ISO thread DIN 13 coarse pitch

THREAD DEPTH ≤ 3XD HOLE TYPE Blind EXECUTION C 2/3 with lubrication hole

APPLICATION Stainless steel with Rm < 1400 N/mm² Synchronised tapping recommended.

A2229

Code

TOLERANCE 6H ISO 2

A2229M6 A2229M8 A2229M10 A2229M12 A2229M14 A2229M16

dxp mm 49.00 6x1 55.00 8 x 1.25 59.00 10 x 1.5 69.00 12 x 1.75 96.00 14 x 2 119.00 16 x 2

€

L mm 80 90 100 110 110 110

l mm 10 13 15 18 20 20

NET PRICES VALID UNTIL 31.07.2016 (VAT EXCLUDED)

MACHINING TOOLS

4 FLUTE

Choose your Selection!

3 FLUTE

2 FLUTE

A4015SET2-6

A4035SET2-6

A4045SET2-6

10 end mills

€ 69.00

d I

SHANK Cylindrical SURFACE TREATMENT WIND (coated)

A4015

APPLICATION Full slots on materials up to 50 / 55 HRC

A4035

A4045 4T - 35°

MATERIAL Micro-grain carbide STANDARD Factory standard TOLERANCE D ≤ 1mm - ~0.019mm D 1~ 6mm - ~ 0.02mm D > 6 ~20mm - ~ 0.025mm

€ 75.00

3T - 45°

d I

2T - 35°

€ 69.00

D mm 2.00 3.00 4.00 5.00 6.00

L mm 50 50 50 50 50

l mm 6 8 11 13 16

d mm 4 4 4 6 6

BOX 2 pcs 2 pcs 2 pcs 2 pcs 2 pcs

FORMING TAP FOR BLIND AND THROUGH HOLES - M - A2358 LTEC

SURFACE FINISH PREMIUM (coated)

TOLERANCE 6HX THREAD DEPTH ≤ 3XD HOLE TYPE Blind and through EXECUTION C 2/3 with coolant groove

DIN 371

DIN 376

NET PRICES VALID UNTIL 31.07.2016 (VAT EXCLUDED)

A2358

Code

€

BH + TH

APPLICATION Carbon and stainless steel up to R ≤ 800 N/mm². aluminum alloys with silicon ≤ 7%

A2358M3 A2358M4 A2358M5 A2358M6 A2358M8 A2358M10 A2358M12 A2358M14 A2358M16

29.00 29.00 29.00 29.00 35.00 44.00 52.00 66.00 82.00

dxp mm 3 x 0.5 4 x 0.7 5 x 0.8 6x1 8 x 1.25 10 x 1.5 12 x 1.75 14 x 2 16 x 2

L mm 56 63 70 80 90 100 110 110 110

l mm 10 12 14 16 18 20 25 25 28

d3 mm 3.5 4.5 6 6 8 10 9 11 12

s mm 2.7 3.4 4.9 4.9 6.2 8 7 9 9

Tapping hole mm 2.8 3.7 4.65 5.55 7.45 9.35 11.2 13.1 15.1

MACHINING TOOLS

2 FLUTE

Enjoy Your Cutting Experience

A4315SET1-6

A4330SET1-6

10 end mills

€ 99.00

€ 149.00

SHANK Cylindrical HELIX 30° right-hand SURFACE TREATMENT WIND (coated)

APPLICATION Full slot and 3D finishing on materials up to 50 HRC

L mm 50 50 50 50 50 50 50 50

l mm 2 3 4 5 6 8 10 12

d mm 6 6 6 6 6 6 6 6

BOX 2 pcs 1 pcs 2 pcs 1 pcs 1 pcs 1 pcs 1 pcs 1 pcs

MATERIAL Sub micro-grain carbide 0.2 STANDARD Factory standard TOLERANCE D < = 1mm - ~0.019mm D 1~ 6mm - ~ 0.02mm D > 6 ~20mm - ~ 0.025mm

A4330

2T - 30°

D mm 1.00 1.50 2.00 2.50 3.00 4.00 5.00 6.00

d I

MATERIAL Micro-grain carbide STANDARD Factory standard TOLERANCE D < = 1mm - ~0.019mm D 1~ 6mm - ~ 0.02mm D > 6 ~20mm - ~ 0.025mm

2T - 30°

d I

A4315

D mm 1.00 1.50 2.00 2.50 3.00 4.00 5.00 6.00

L mm 50 50 50 50 50 50 50 50

SHANK Cylindrical HELIX 30° right-hand SURFACE TREATMENT WIND X (coated)

APPLICATION 3D finishing on materials up to 65 HRC

l mm 1.5 2.5 3 4 5 6 8 9

d mm 4 4 4 4 4 4 6 6

BOX 2 pcs 1 pcs 2 pcs 1 pcs 1 pcs 1 pcs 1 pcs 1 pcs

SINGLE FLUTE CYLINDRICAL END MILLS KIT- FOR LIGHT ALLOYS - A4709 LTEC

Wide range

of applications

MATERIAL Micro-grain solid carbide STANDARD Factory standard SHANK Cylindrical HELIX 25° right-hand - right-cut

€ 129.00

Multiple diameters selection A4709

Code

Description

BOX

A4709BOX1

Mill set item D 4 - 5 - 6 - 8 - 10 - 12

6 pcs NET PRICES VALID UNTIL 31.07.2016 (VAT EXCLUDED)

MACHINING TOOLS

Prevents chipping

on cutting edges & corners High resistance and straightness

Our Milling Masterpiece

α1

Code

€

A40392 A40392G6 A40393 A40393G6 A40394 A40394G6 A40395 A40395G6 A40396 A40397 A40398 A403910 A403912 A403914 A403916 A403920

16.50 22.50 16.50 22.50 19.80 22.80 22.80 22.80 22.80 32.00 35.00 44.50 62.00 79.00 108.00 158.00

A4046

Code

€

A404606 A404608 A404610 A404612 A404616

25.50 39.00 54.00 71.00 109.00

α2 α3

APPLICATION Slot and side milling on materilas up to 55 HRC. Reinforced chamfered cutting edge. Recommended for stainless steels.

MATERIAL Sub micro grain carbide STANDARD NdF TOLERANCE h10 SHANK Cylindrical HELIX 40° right hand Variable pitch SURFACE TREATMENT WIND +

APPLICATION Full slot up to 1.25XD and side milling on carbon steels up to 55 HRC, stainless steel and titanium alloy. High resistance and straigthness. Higher feed rates. NET PRICES VALID UNTIL 31.07.2016 (VAT EXCLUDED)

A4039

3T – VARIABLE

MATERIAL Sub micro grain carbide STANDARD Factory standard TOLERANCE h10 SHANK Cylindrical HELIX Right hand variable angle and variable pitch SURFACE TREATMENT WIND +

4F - VARIAB.

6527L D mm 2 2 3 3 4 4 5 5 6 7 8 10 12 14 16 20

D mm 6 8 10 12 16

L mm 32 51 38 51 51 51 51 51 51 63 63 72 72 75 83 105

l mm 5 5 7 7 5 11 13 13 13 19 19 22 22 25 25 32

L mm 54 58 66 73 82

H mm 7.5 7.5 13 13 16 16 18 18 18 24 25 30 30 36 36 45

l mm 10 12 14 16 22

ch mm 0.05 0.05 0.05 0.05 0.10 0.10 0.10 0.10 0.15 0.15 0.20 0.20 0.20 0.25 0.25 0.30

d mm 6 8 10 12 16

d1 mm 1.8 1.8 2.8 2.8 3.8 3.8 4.8 4.8 5.8 6.8 7.6 9.6 11.6 13.6 15.6 19.6

d mm 2 6 3 6 4 6 5 6 6 7 8 10 12 14 16 20

Ch 45° mm 0.40 0.50 0.50 0.75 0.75

MACHINING TOOLS

Finish Higher feed rates Semi-finish Roughing High metal removal rates Plunging Side milling

MATERIAL Sub micro grain carbide STANDARD DIN 6528 TOLERANCE h10 SHANK Cylindrical HELIX 40° right hand Variable pitch SURFACE TREATMENT WIND + (coated)

APPLICATION Slot up to 1.25XD and side milling on carbon steels up to 55 HRC, stainless steel and titanium alloy.

A4047

Code

€

4T - VARIAB.

Slotting Ramping

A40475 A40476 A40477 A40478 A40479 A404710 A404712 A404714 A404716 A404720 A404725

24.00 24.00 33.00 33.00 44.00 46.00 59.00 69.00 95.00 156.00 239.00

A4111

Code

€

4T - VARIAB.

APPLICATION Slot and profiling on materials up to 55 HRC. Optimized geometry for stainless and titanium alloys.

A4111600 A4111605 A4111610 A4111615 A4111620 A4111800 A4111805 A4111810

29.00 29.00 29.00 29.00 29.00 49.00 49.00 49.00

D mm 6 6 6 6 6 8 8 8

R mm 0 0.5 1 1.5 2 0 0.5 1

l mm 13 13 13 13 13 19 19 19

d1 mm 5.8 5.8 5.8 5.8 5.8 7.8 7.8 7.8

H mm 25 25 25 25 25 31 31 31

L mm 57 57 57 57 57 63 63 63

d mm 6 6 6 6 6 8 8 8

A4111

Code

€

4T - VARIAB.

MATERIAL Micro-grain carbide STANDARD Factory standard TOLERANCE h10 SHANK Cylindrical with neck reduction HELIX 40° right hand Variable pitch SURFACE TREATMENT WIND + (coated) A4111815 A4111820 A41111000 A41111005 A41111010 A41111015 A41111020 A41111200 A41111205 A41111210 A41111215 A41111220 A41111605 A41111610 A41111620

49.00 49.00 65.00 65.00 65.00 65.00 65.00 79.00 79.00 79.00 79.00 79.00 129.00 129.00 129.00

D mm 5 6 7 8 9 10 12 14 16 20 25

D mm 8 8 10 10 10 10 10 12 12 12 12 12 16 16 16

L mm 57 57 63 63 72 72 83 83 92 104 121

R mm 1.5 2 0 0.5 1 1.5 2 0 0.5 1 1.5 2 0.5 1 2

l mm 13 13 16 19 19 22 26 26 32 38 45

l mm 19 19 22 22 22 22 22 26 26 26 26 26 26 26 26

d1 mm 7.8 7.8 9.8 9.8 9.8 9.8 9.8 11.8 11.8 11.8 11.8 11.8 15.8 15.8 15.8

d h6 mm 6 6 8 8 10 10 12 14 16 20 25

H mm 31 31 34 34 34 34 34 38 38 38 38 38 38 38 38

Ch 45° mm 0.4 0.4 0.40 0.5 0.50 0.5 0.75 0.75 0.75 0.75 0.75

L mm 63 63 72 72 72 72 72 83 83 83 83 83 92 92 92

d mm 8 8 10 10 10 10 10 12 12 12 12 12 16 16 16

NET PRICES VALID UNTIL 31.07.2016 (VAT EXCLUDED)

MACHINING TOOLS Excellent finish quality

New generation of solid carbide end mills Advanced geometry for a better chip evacuation! MATERIAL Micro-grain carbide

TOLERANCE D < = 1mm - ~0.019mm D 1~ 6mm - ~ 0.02mm D > 6 ~20mm - ~ 0.025mm HELIX 45° right-hand

APPLICATION Very high performances end mill. Full slot on aluminum alloy up to 10% silicon content and plastic materials. NET PRICES VALID UNTIL 31.07.2016 (VAT EXCLUDED)

A45206 A45208 A452010 A452012 A452016 A452020

32.00 46.00 62.00 73.00 129.00 199.00

D mm 6 8 10 12 16 20

L mm 57 63 72 83 92 104

A4525

Code

€

A452506 A452508 A452510 A452512 A452516 A452520

36.00 48.00 66.00 89.00 138.00 215.00

A4610

Code

€

A46101 A46102 A46103 A46104 A46105 A46106 A46108 A461010 A461012 A461016

19.00 19.00 19.00 19.00 19.00 19.00 26.00 39.00 49.00 99.00

APPLICATION Very high performances rougher for slot and side milling on aluminum alloy up to 7% silicon content.

€

2T - 45°

TOLERANCE h6 HELIX 45° right-hand

Code

3T - 45°

APPLICATION Slot and side milling on aluminum alloy up to 7% silicon content.

A4520

3T - 30°

High stock removal rates

D mm 6 8 10 12 16 20

l mm 9 12 12 12 14 17

D mm 1 2 3 4 5 6 8 10 12 16

L mm 50 60 75 75 100 100

d mm 6 8 10 12 16 0

L mm 50 50 50 50 50 50 60 75 75 92

l mm 15 20 25 30 35 45

H mm 21 27 31 37 43 53

l mm 3 6 8 11 13 16 19 25 26 32

d mm 6 8 10 12 16 20

r mm 0.25 0.25 0.50 0.50 1.0 1.0

d mm 6 6 6 6 6 6 8 10 12 16

MACHINING TOOLS

APPLICATION Slotting and side milling on aluminum alloys and plastic materials.

TOLERANCE e8 HELIX 45° right-hand variable pitch

A4615

Code

€

3T - 45°

TOLERANCE D < = 1mm - ~ 0.019mm D 1~ 6mm - ~ 0.02mm D > 6 ~20mm - ~ 0.025mm HELIX 45° right-hand

A46152 A46153 A46154 A46155 A46156 A46158 A461510 A461512 A461516

22.00 22.00 22.00 22.00 22.00 32.00 44.00 57.00 109.00

α1

€

A4616302 A4616305 A4616402 A4616405 A4616502 A4616505 A4616602 A4616605 A4616610 A4616615 A4616802 A4616805 A4616810 A4616815

23.00 23.00 25.00 25.00 26.00 26.00 28.00 28.00 28.00 28.00 39.00 39.00 39.00 39.00

D mm 3 3 4 4 5 5 6 6 6 6 8 8 8 8

r mm 0.2 0.5 0.2 0.5 0.2 0.5 0.2 0.5 1.0 1.5 0.2 0.5 1.0 1.5

L mm 55 55 55 55 58 58 63 63 63 63 76 76 76 76

d3 mm 2.8 2.8 3.8 3.8 4.8 4.8 5.8 5.8 5.8 5.8 7.7 7.7 7.7 7.7

I mm 4.5 4.5 6 6 7.5 7.5 9 9 9 9 12 12 12 12

l mm 6 10 12 16 18 20 25 30 40

d mm 6 6 6 6 6 8 10 12 16

α3 H mm 12 12 12 12 15 15 18 18 18 18 24 24 24 24

TOLERANCE e8 HELIX 40° right-hand variable pitch

APPLICATION High performances 3D finishing on aluminum alloy up to 12% silicon content.

d mm 3 3 4 4 5 5 6 6 6 6 8 8 8 8

A4616

Code

€

3T - 45°

Code

L mm 50 50 50 50 50 60 75 75 100

α2

A4616820 A46161002 A46161005 A46161010 A46161015 A46161020 A46161202 A46161205 A46161210 A46161215 A46161220 A46161602 A46161610 A46161620

39.00 59.00 59.00 59.00 59.00 59.00 86.00 86.00 86.00 86.00 86.00 143.00 143.00 143.00

α1

D mm 8 10 10 10 10 10 12 12 12 12 12 16 16 16

r mm 2.0 0.2 0.5 1.0 1.5 2.0 0.2 0.5 1.0 1.5 2.0 0.2 1.0 2.0

L mm 76 89 89 89 89 89 100 100 100 100 100 110 110 110

d3 mm 7.7 9.7 9.7 9.7 9.7 9.7 11.6 11.6 11.6 11.6 11.6 15.5 15.5 15.5

I mm 12 15 15 15 15 15 18 18 18 18 18 24 24 24

H mm 24 30 30 30 30 30 36 36 36 36 36 48 48 48

d mm 8 10 10 10 10 10 12 12 12 12 12 16 16 16

α2 α3

A4620

Code

€

3T - 25°

A4616

3T - 45°

APPLICATION Slot and z-level semi-finish pass on aluminum alloys. Superior performances for steep wall finish.

D mm 2 3 4 5 6 8 10 12 16

A46203 A46204 A46205 A46206 A46208 A462010 A462012 A462016

19.00 22.00 26.00 33.00 42.00 54.00 66.00 109.00

D mm 3 4 5 6 8 10 12 16

L mm 50 50 64 50 64 75 75 89

l mm 6 940 20 12 20 20 24 35

d mm 4 4 5 6 8 10 12 16

NET PRICES VALID UNTIL 31.07.2016 (VAT EXCLUDED)

MACHINING TOOLS

Knucle Form round shape up to 10 extra-fine and fine over 12

The Excellence in roughing of any kind of steel and cast iron EXTRA SHORT

A4511

Code

€

4F - 30°

APPLICATION High performance roughing. Slot roughing and side milling on carbon steels up to 50HRC, grey cast and malleable irons Superior flexion resistance Higher feed rates.

A451108 A451110 A451112 A451116

65.00 78.00 92.00 154.00

A4512

Code

€

4T - 30°

MATERIAL Sub micro-grain solid carbide 0,6 STANDARD NDF TOLERANCE -0.020 / -0.070 mm SHANK Weldon HELIX 30° right-hand

A45126 A45128 A451210 A451212 A451216 A451220

55.00 64.00 76.00 90.00 149.00 225.00

D mm 8 10 12 16

L mm 58 66 73 82

l mm 12 14 16 22

d mm 8 10 16 22

D mm 6 8 10 12 16 20

L mm 57 63 72 83 92 104

l mm 13 16 22 26 32 38

d mm 6 8 10 12 16 20

z 4 4 4 4

MATERIAL Sub micro-grain carbide 0,8 STANDARD DIN 844A TOLERANCE -0.020 / -0.070 mm SHANK Weldon HELIX 20° right-hand

APPLICATION Slotting and side milling on carbon steels up to 55 HRC, grey casts and malleable irons.

NET PRICES VALID UNTIL 31.07.2016 (VAT EXCLUDED)

z 4 4 4 4 4 4

MACHINING TOOLS

High performance on steels and stainless steels

NO Vibrations Variable Flute Technology

APPLICATION High performance roughing and semi finishing on carbon steels, stainless steels and nickel alloys.

A4516

Code

€

Variable helix

MATERIAL Micro-grain solid carbide STANDARD Factory standard TOLERANCE h10 SHANK Cylindrical HELIX Variable 28° - 31° right-hand SURFACE TREATMENT Wind+

A451606 A451608 A451610 A451612 A451616 A451620

56.00 65.00 79.00 95.00 153.00 230.00

D mm 6 8 10 12 16 20

L mm 57 63 72 83 92 104

l mm 13 19 22 26 32 38

d mm 6 8 10 12 16 20

z 4 4 4 4 6 6

NET PRICES VALID UNTIL 31.07.2016 (VAT EXCLUDED)

MACHINING TOOLS

Internal

turning toolholders

Set of HM tools for internal boring, they allow holes boring up to 8xD. The shank has two flat sides to clamp in multiple ways. Laser marked division in MM for a rapid and safe manual positioning.

€ 318.00 Left Kit: B1U19SETLHM03 Composition C SCLCL 03 Code

d mm

l1 mm

l2 mm

f mm

D min mm

B1U13L0403

2.5

B1U13L0503

100

B1U13L0603

110

3.5

€ 318.00 Right Kit: B1U19SETRHM03 Composition C SCLCR 03 Code

d mm

l1 mm

l2 mm

f mm

D min mm

B1U13R0403

2.5

B1U13R0503

100

B1U13R0603

110

3.5

Recommended insert... CCGT03X102L-W08

SH730

CCGT03X102R-W08

SH730

NET PRICES VALID UNTIL 31.07.2016 (VAT EXCLUDED)

MACHINING TOOLS

€ 318.00 Left Kit: B1U19SETLHM06 Composition E SCLCL 06 Code

d mm

l1 mm

l2 mm

f mm

D min mm

B1U13L0806

125

B1U13L1006

125

B1U13L1206

150

€ 318.00 Right Kit: B1U19SETRHM06 Composition E SCLCR 06 Code

d mm

l1 mm

l2 mm

f mm

D min mm

B1U13R0806

125

B1U13R1006

125

B1U13R1206

150

Recommended insert... CCMT 060204-CFP

4125

B0C55CCCFP11

€ 228.00 Left Kit: B1U29SETLHM07 Composition E SDUCL 07 Code

d mm

l1 mm

l2 mm

f mm

D min mm

B1U27L1007

125

B1U27L1207

150

12,5

€ 228.00 Right Kit: B1U29SETRHM07 Composition E SDUCR 07 Code

d mm

l1 mm

l2 mm

f mm

D min mm

B1U27R1007

125

B1U27R1207

150

12.5

Recommended insert... DCMT 070204-CFP

4125

B0D56DCCFP11

NET PRICES VALID UNTIL 31.07.2016 (VAT EXCLUDED)

MACHINING TOOLS

Perfect

for Carbon Steels and Cast Irons

1 Toolholder + 20 inserts - KIT 1037593

€ 118.00 SCLCR/L

95° Approach angle Lubrication holes Insert shape Insert dim. mm Clamping system Application

CC..T - CC..W 6 - 9 - 12 S Internal turning

SPARE PARTS INCLUDED Code

Description

D min mm

B1U15R1609

A16Q SCLCR 09

Code

Description

Quality

Dep. mm

Feed mm/rev

B0C55CCCMP13

CCMT 09T304-CMP

4125

0.50 - 0.20 - 0.30

0.12 - 0.16 - 0.21

NET PRICES VALID UNTIL 31.07.2016 (VAT EXCLUDED)

d mm

f mm

L1 mm

I mm

Wrench

Screwdriver

Shim screw

Screw

180

BRICA148

BRICA004

/ MEDIUM CUTTING CMP

MACHINING TOOLS

Excellent Geometry

and grade for continuous cut

1 ToolHolder + 20 inserts - KIT 1037591

€ 118.00

95° - 75° Approach angle

PCLNR/L 95°

Insert shape Insert dim. mm Clamping system Application

95°

CN..A - CN..G - CNMM 12 - 16 - 19 - 25 D-P Turning and facing

SPARE PARTS INCLUDED Code

Description

B mm

H mm

f mm

L2 mm

L1 mm

B0U11R2525M12

PCLNR 2525 M12

Clamp

Wrench

Shim

Shim screw

Spring pin

150

BRICA013

BRICA027

BRICA015

BRICA007

BRICA017

Code

Description

Quality

Dep. mm

Feed mm/rev

B0C50CNCM13

CNMG 120408-CM

4125

1.00 - 2.50 - 4.00

0.22 - 0.35 - 0.44

MEDIUM CUTTING CM

NET PRICES VALID UNTIL 31.07.2016 (VAT EXCLUDED)

MACHINING TOOLS

Multifunctional face mills

APPLICABLE INSERTS SEHX 1204

APPLICATION Face milling

€ 699.00 1 Toolholder + 100 inserts - KIT

H 45°

45°

m ,7 12

D 45°

4,5mm

45°

4,5mm

B3F06

Code

Air hole

Insert

D mm

d mm

A mm

H mm

Max Op. mm

Bore

B3F0650Z4

With

SEHX 1204

4.5

NET PRICES VALID UNTIL 31.07.2016 (VAT EXCLUDED)

m m ,7

PT30

Ap max

SEHX 1204...AL

SEHX 1204 AFSN MM

B3B2112SNMM01

Grade

Description

SEHX 1204...ML

Code

SEHX 1204...MM

MACHINING TOOLS

End mills for perfect square

shouldering

COUPLING TYPE Weldon APPLICABLE INSERTS APKT 1003

APPLICATION Square shoulder milling

€ 179.00 1 Toolholder + 20 inserts - KIT B4F3020Z3SET R

3,76mm

Code

Description

Grade

B4E2110MRPT30

APKT 1003PDTR - MR

PT30

11,20mm

6,70mm

B3F06

Code

Air hole

Insert

Insert screw

D mm

d mm

L mm

h mm

h1 mm

Short Weldon

B4F3020Z3

With

APKT 1003

BRICA001

COUPLING TYPE Weldon APPLICABLE INSERTS APKT 1604

APPLICATION Square shoulder milling

€ 199.00 1 Toolholder + 20 inserts - KIT B4F3725ZSET

Code

MF Description

Grade

B4F2116MRPT30

APKT 1604PDR - MR

PT30

ALP

B4F37

Code

Air hole

Insert

Insert screw

D mm

d mm

L mm

h mm

h1 mm

Weldon

B4F3725Z2

With

APKT 1604

BRICA003

100

NET PRICES VALID UNTIL 31.07.2016 (VAT EXCLUDED)

MACHINING TOOLS

High runout accuracy High speed Heavy duty

Revolving tailstock centres on set

â&#x201A;Ź 465.00

KIT C6269CM4 1 Revolving tailstock 1 Centre point standard 1 Centre point short 2 Centre point extra-short 1 Centre point for pipes

29 mm

CM4

61 mm

Long life

mounting key included 38 mm

51 mm

C6252CM4 2 mm

27 mm

1 Centre point standard C6255CM4

39 mm

27 mm

1 Centre point short C6257CM4

NET PRICES VALID UNTIL 31.07.2016 (VAT EXCLUDED)

39 mm

27 mm

2 Centre point extra-short C6259CM4

15,303 mm

26 mm

59 mm

7 mm

29 mm

15,303 mm

12 mm

29 mm

15,303 mm

29 mm

33 mm

15,303 mm

12 mm

16 mm

35 mm

29 mm

1 Centre point for pipes C6262CM4

MACHINING TOOLS

For a wide range of materials

6 SHANKS

ZYAS TYPE Ideal for deburring operations. Code

G6015BOX1

Description Pcs.

WRC TYPE

€ 105.00

Ideal for working surfaces, profiles and in pre-processing millwork on carryover welds. Code Description Pcs.

G6055BOX1 Set of D 4 - 6 - 8 - 10 - 12 5

€ 105.00

Set of D 4 - 6 - 8 - 10 - 12 5

RBF TYPE

€ 105.00

Ideal for machining narrow profiles. Code Description Pcs.

G6075BOX1 Set of D 4 - 6 - 8 - 10 - 12 5 NET PRICES VALID UNTIL 31.07.2016 (VAT EXCLUDED)

MACHINING TOOLS

The best solution for all types of milling operations

Complete sets for all diameters ER11

Pcs

Extra accurate Standard

d mm 1 - 1.5 - 2 - 2.5 - 3 - 3.5 - 4 - 5 - 6 - 7

€

Type

Pcs

209.00 99.00 69.00

Extra accurate

d mm 1 - 1.5 - 2 - 2.5 - 3 - 4 - 5 - 6 - 7 - 8 - 9 - 10

3 - 4 - 5 - 6 - 7 - 8 - 9 - 10

Code

€

Type

Pcs

C411220QBOX C411220SBOX C411220TBOX C411220SBOX1

230.00 110.00 250.00 39.00

Extra accurate Standard Sealed Standard

d mm 2 - 2.5 - 3 - 4 - 5 - 6 - 7 - 8 - 9 - 10 -11 - 12 - 13

3 - 4 - 5 - 6 - 7 - 8 - 9 - 10 -11 - 12 - 13 4 - 6 - 8 - 10 - 12

11 5

Code

€

Type

C412511QBOX C412511SBOX

188.00 110.00

Code C411116QBOX C411116SBOX C411116SBOX1

ER16

Standard

ER20

NET PRICES VALID UNTIL 31.07.2016 (VAT EXCLUDED)

MACHINING TOOLS

ER25 Code

€

Type

C411325QBOX C411325SBOX C411325TBOX C411325SBOX1

280.00 120.00 350.00 48.00

Extra accurate Standard Sealed Standard

Code

€

Type

C411432QBOX C411432SBOX C411432TBOX C411432SBOX1

360.00 120.00 395.00 49.00

Extra accurate Standard Sealed Standard

Code

€

Type

C411540SBOX C411540TBOX C411540SBOX1

99.00 388.00 60.00

Standard Sealed Standard

ER32

d mm

Pcs

2 - 3 - 4 - 5 - 6 - 7 - 8 - 9 - 10 - 11 - 12 -13 - 14 -15 - 16

3 - 4 - 5 - 6 - 7 - 8 - 9 - 10 - 11 - 12 -13 - 14 -15 - 16 4 - 6 - 8 - 10 - 12 - 16

14 6

d mm

Pcs

3 - 4 - 5 - 6 - 7 - 8 - 9 - 10 -11 -12 - 13 - 14 -15 -16 -17 - 18 - 19 - 20

6 - 8 - 10 - 12 - 16 - 20

d mm

Pcs

8 - 10 - 12 - 14 - 16 - 18 - 20 - 22 - 24 - 25

6 - 8 - 10 - 12 - 16 - 20 - 25

ER40

NET PRICES VALID UNTIL 31.07.2016 (VAT EXCLUDED)

MACHINING TOOLS

€ 33.50 ER COLLET CHUCKS FORM AD/B SK DIN 69871

Code

Description

Capacity

Ring nut

C001043270

SK40B ER32 L70

3-20

Std

D mm 50

L mm 70

D mm 50

L mm 70

€ 33.50 ER COLLET CHUCKS AD/B SHAPE MAS 403 BT

€ 159.00 C4525SK40

€ 189.00

Code

Description

Capacity

Ring nut

C101043270

BT40B ER32 L70

3-20

Standard

Provides exact setting and accurate machining NO contact between tool-holder and tool-lock

C4525SK50 0°

€ 199.00 C4525SK63 -90°

NET PRICES VALID UNTIL 31.07.2016 (VAT EXCLUDED)

+90°

MACHINING TOOLS

High clamping system

FIGURE 1

FIGURE 2

Code C3190111270 C31901116100 C3190161280 C31901616130 C3190161680 C31901620100 C31901620160 C31902016100 C31902020100 C31902020160 C31902520100 C31902525100 C31903225100 C31903232100 C3190323250 C3190404080

2x1 €

Description

Capacity

Ring nut

92.00 101.00 92.00 107.00 100.00 103.00 123.00 104.00 104.00 123.00 115.00 115.00 115.00 115.00 104.00 140.00

CIL12 x 70 ER11 CIL16 x 100 ER11 CIL12 x 80 ER16 CIL16 x 130 ER16 CIL16 x 80 ER16 CIL20 x 100 ER16 CIL20 x 160 ER16 CIL16 x 100 ER20 CIL20 x 100 ER20 CIL20 x 160 ER20 CIL20 x 100 ER25 CIL25 x 100 ER25 CIL25 x 100 ER32 CIL32 x 100 ER32 CIL32 x 50 ER32 CIL40 x 80 ER40

0.5 - 7 0.5 - 7 0.5 - 10 0.5 - 10 0.5 - 10 0.5 - 10 0.5 - 10 1 - 13 1 - 13 1 - 13 2 - 16 2 - 16 3 - 20 3 - 20 3 - 20 4 - 26

Mini Mini Mini Mini Mini Mini Mini Mini Mini Mini Standard Standard Standard Standard Standard Standard

D mm 16 16 22 22 22 22 22 28 28 28 42 42 50 50 50 63

d mm 12 16 12 16 16 20 20 16 20 20 20 25 25 32 32 40

L mm 70 100 80 130 80 100 160 100 100 160 100 100 100 100 50 80

h mm 25 22 37 37 37 30 30 40 37 37 46 32 54 38 38 60

Figure 1 1 1 1 1 1 1 1 1 1 2 2 2 2 2 2

NET PRICES VALID UNTIL 31.07.2016 (VAT EXCLUDED)

MACHINING TOOLS

Bi-metal band saw blades HSS M42 toothing Variable pitch

Three blades. All materials. Standard tooth Reduces vibrations For light profiles and short chipping materials Dimensions Up to From 2451 From 2591 From 2701 From 2826 From 2926 From 3011 From 3151 From 3321 From 3421 (heig x width) 2450 to 2590 to 2700 to 2825 to 2925 to 3010 to 3150 to 3320 to 3420 to 3660 mm

27 x 0.9

21.50

23.50

24.00

24.70

25.50

26.00

27,50

28.50

29.30

31.50

Reinforced tooth Straight and clean cut Extremely accurate angle cuts Dimensions Up to From 2451 From 2591 From 2701 From 2826 From 2926 From 3011 From 3151 From 3321 From 3421 (heig x width) 2450 to 2590 to 2700 to 2825 to 2925 to 3010 to 3150 to 3320 to 3420 to 3660 mm

27 x 0.9

24.75

25.60

26.90

28.20

28.75

29.35

30.70

31.90

33.75

35.00

Variable tooth with a positive rake angle Resistant to high temperature Fast cutting rates on heavy materials Dimensions Up to From 2451 From 2591 From 2701 From 2826 From 2926 From 3011 From 3151 From 3321 From 3421 (heig x width) 2450 to 2590 to 2700 to 2825 to 2925 to 3010 to 3150 to 3320 to 3420 to 3660 mm

27 x 0.9

24.60

25.30

27.00

28.20

28.56

29.40

30.60

31.92

33.00

Dimensions Up to From 3661 From 3901 From 4101 From 4301 From 4501 From 4751 From 4861 From 5041 (heig x width) 3660 to 3900 to 4100 to 4300 to 4500 to 4750 to 4860 to 5040 to 5200 mm

34 x 1.1 NET PRICES VALID UNTIL 31.07.2016 (VAT EXCLUDED)

41.40

43.80

45.60

47.40

49.80

52.20

53.40

55.20

57.00

34.80

Calipers Micrometers indicators Height gauges Measuring machines

Metrology Perfect mechanism

Solid structure

IP67 Protection – Water – Liquids and dust. Data output waterproof. Automatic Power ON and Pause after 20 minutes.

125.00

Measuring range mm 0 ÷ 150

D0015200

175.00

0 ÷ 200

290.5

16 x 3.5

D0015300

280.00

0 ÷ 300

388

Code

€

D0015150

A mm 234.5

B mm 40

C mm 11

D mm 16

E mm 16 x 3.5

Four measuring functions. Zero setting on any position. Vernier with wheel drive.

D0026150

59.00

Measuring range mm 0 ÷ 150

D0026150P

59.00

0 ÷ 150

1.5

235

D0026200

79.00

0 ÷ 200

3.5

290

D0026300

118.00

0 ÷ 300

100

3.5

380

Code

€

A mm 40

B mm 16

C mm 76

D mm 16

E mm 1.5

L mm 235

VERNIER CALIPERS - ALPA Monobloc stainless steel structure. Lever lock. Accurate execution.

NET PRICES VALID UNTIL 31.07.2016 (VAT EXCLUDED)

27.00

Measuring range mm 0 ÷ 150

A mm 40

B mm 20

C mm 15

D mm 16

L mm 230

45.00

0 ÷ 200

280

62.00

0 ÷ 300

400

Code

€

D0220150 D0220200 D0220300

Metrology

Precise accurate

Range 0 ÷ 161 mm

MEGA Data output water-proof

Provided with S.I.S. System. Automatic wake-up by moving the measuring spindle. Position memorized in sleeping mode. Waterproof and for heavy duty. Fast forward 12mm/REV.

56,4

Ø 6,5

Ø 28,5

4,5

Code

€

D1111000030

345.00

D1111030060

500.00

D1111066102

640.00

Measuring range mm 0 ÷ 30

A mm 37.3

B mm 27.5

C mm 62

D mm 12.2

E mm 63

F mm 174

30 ÷ 66

73.3

66 ÷ 102

109.3

13.5

230

14.5

106

269

Graduated feeding unit assay. Sensible friction. Fast forward 1mm/REV, 0.01 mm resolution.

Code

€

Measuring range mm 0 ÷ 25

A mm 6

B mm 24

L mm 32

D1140000025

58.00

D1140025050

62.00

25 ÷ 50

D1140050075

68.00

50 ÷ 75

D11400750100

85.00

75 ÷ 100

107

NET PRICES VALID UNTIL 31.07.2016 (VAT EXCLUDED)

Metrology

Digital dial gauge with large display, zero setting at any position, conversion mm/inch.

Large display

Ø 8 mm stem

D222912,5

79.00

Measuring range mm 0 ÷ 12.5

D222912,50,001

120.00

0 ÷ 12.5

0.001

3.0

D222925

109.00

0 ÷ 25

0.01

1.5

D222950

149.00

0 ÷ 50

0.01

3.0

€

Code

Reading mm 0.01

Battery Volt 1.5

DIAL INDICATORS

Code

€

D23511044 D2352532

26.00 40.00

Run mm 10 5

NET PRICES VALID UNTIL 31.07.2016 (VAT EXCLUDED)

A mm 69 32

B mm 60 46

Code D23511044

Code D2352532

Shock-proof mechanism

Travel 3 or 5 mm Ø 8 mm cylindrical stem

C mm 55 40

D mm 18 39

E mm 15.5 15

F mm 22.5 14

G mm 8 21

H mm 6 6

Metrology

High quality digital test indicators Swiss made high quality lever dial indicator. Automatic reversal of the stylus direction of rotation. High precision movement mounted on 6 ruby bearings. Carbide ball stylus, adjustable within 270° and interchangeable.

Code

€

D2290022812

129.00

Run mm 0.2

D2290023712

139.00

D2290052836

145.00

D2290053736

159.00

Resolution 0,001mm, frost and water resistant Data output, auto OFF. 360° rotating display, 8mm diam stem, back dovetail.

Diameter mm 27.4

Resolution mm 0.002

Lever L mm 12

0.2

0.002

0.5

27.4

0.01

0.5

0.01

Code D233912,5 D233936

D2290082812

98.00

0.8

27.4

0.01

D2290083712

122.00

0.8

0.01

350.00

Measuring range mm 0.8

Lever L mm 12.5

Repeatability µm 3

Measuring force N 0.13 ±15%

380.00

0.5

36.5

0.07 ±15%

€

LEVER DIAL TEST INDICATOR Robust one-piece body featuring 3 dovetails.

Rolling bezel for zero setting

LEVER TEST HOLDER

Buy one Dial test get Lever test holder Free Code

€

Measuring range mm

Ø mm

Reading mm

Code D2312

Holding shoulder for perpendicular models with cylindrical shank. Clamping point for fixing shank and dovetail clamp. Dimensions: ø 8 x 25 ø 4 mm

Length mm

D2316082912

75.00

0 ÷ 0.8

0.01

12.5

D2316083812

87.00

0 ÷ 0.8

0.01

12.5 NET PRICES VALID UNTIL 31.07.2016 (VAT EXCLUDED)

Metrology

Easy, Quick, Precise

Totally manufactured in Switzerland. Durability, accuracy and reliability on the long run. Air cushions for easy displacement on the measuring table.

Functionality: - Measuring ranges 400 and 700 mm - Resolution 0,001 mm - Repeatability 2 (Ø : 4) - Measuring force N 0,75 ÷ 1,5 mm - Electronically adjustable measuring force - Autonomy: 40 h (lithium-ion batteries) - Larger than 300 mm probes as standard - Data Output RS232 / USB interfaces

€ 3,950.00

€ 4,650.00

Code D4200700

Code D4200400

D4200400

Measuring range mm 407

Measuring range with extension mm 508

Max errors µm 5

Frontal squareness deviation µm 10

D4200700

711

812

Code

NET PRICES VALID UNTIL 31.07.2016 (VAT EXCLUDED)

Metrology

SCHWER

Solid and Accurate

Hardness tester for Rockwell scale measurements. Cast iron support structure. Max height 170mm, depth capacity 165 mm Hydraulic load application system with weight method.

€ 1,450.00

€ 2,150.00

Equipment: No. 1 indenter with diamond pyramid No. 1 ball indenter Ø 1/16” No. 5 spare balls No. 1 HRC 20-30 specimen No. 1 HRC 60-70 specimen No. 1 HRB 20-30 specimen

Manual

Automatic

Weight 80kg

Weight 90kg Full automatic load application

Code D722001

Code 1040793

NET PRICES VALID UNTIL 31.07.2016 (VAT EXCLUDED)

Metrology

SCHWER Equipment: No. 1 Diamond Rockwell Indenter No. 1 Diamond Vickers Indenter No. 3 Ball Indenter No. 1 HRB No. 1 Standard Vickers Hardness Block No. 1 Standard Brinell Hardness Block No. 5 Weight 0, 1, 2, 3, 4 No. 1 Check List of Brinell Hardness No. 1 Micro Eyepiece No. 1 2.5x Objective No. 1 5x Objective No. 1 Slipped Testing Table

€ 3,400.00

Measure Types: Rockwell (HRA, HRB e HRC), Brinell and Vickers. Max height 200mm, depth capacity 200mm Motorized and temporized mechanism Integrate Microscope (37.5x e 75x) for Brinell and Vickers marks

Code D722201

GRANITE INSPECTION PLATE AND IRON STAND Black granite

Highly accurate surface finishing. Internal stress free. Electric insulation and non-magnetic. Complete with flatness-levelness certification.

Granite plates

198.00

Dimensions mm 630 x 400 x 80

Accuracy ± μm 2.2

360.00

800 x 500 x 100

2.6

Code

€

D3200630 D3200800

kg 62 130

D32001000

495.00

1000 x 630 x 140

3.0

260

D32001200

965.00

1200 x 800 x 160

3.4

460

Iron stands Code

€

Dimensions mm 600 x 400

Weight Kg 12

D3210600*

295.00

D32101000

370.00

1000 x 630

D32101200

398.00

1200 x 800

* Suitable for 630x400x80 e 800x500x100 surfaces NET PRICES VALID UNTIL 31.07.2016 (VAT EXCLUDED)

Metrology

New bench projector Horizontal light path

Digital Quadacheck 220 display 0.5 μm resolution Heidenhain optical scales Measuring program with geometric functions for skew alignment, angle, radius, point, line, circle. Automatic feature list and graphical view. Macro programming facility guides for operator Rotating 350 mm diameter screen, with hood, digital angle measurement measuring range 175 mm X 100 mm Selectable magnification lens 10x or 20x

Code D7954QUADRACK

From € 9,850.00

OPTICAL FEATURES Magnification

x10

x20

x25

x50

x100

Field of View ø mm

13.5

6.8

3.4

Working distance mm

80.5

38.5

15.5

Max work ø (full field)

119

108

Max work ø (half field)

100

Max workpiece height

100 mm NET PRICES VALID UNTIL 31.07.2016 (VAT EXCLUDED)

Metrology

High quality vertical profile projector Stage travel 155 x 55 mm, Fast movement handle, 0.5 μm optical scales, 3 axis (X Y and angles) Data processing unit with multiple functions: radius, angles, distance Max height measure 43 mm max weight on the stage 15 kg. - High quality vertical profile projector versatile and easy to operate - Fine grinded glass screen for clear image with cross - Screen (300mm) complete with cross lines and chart clips - Built-in profile and surface illumination - 10x, 20x, 50x, 100x projection lenses available - Data output via RS-232 interface - Display-readout unit DP100 included

Code D7952300

OPTICAL FEATURES Magnification

10x

20x

50x

100x

Field of View ø mm

Working distance mm

77.7

44.3

24.5

25.3

Max work ø (full field)

Max work ø (half field)

160

130

From € 7,400.00

NET PRICES VALID UNTIL 31.07.2016 (VAT EXCLUDED)

tool Cabinets Service Tool cases tool sets pneumatic tools Abrasives WORKBENCHes

Mro

7 drawers

telescopic guide automatic hooking system

Code P5270STAR7 Vulcanized rubber wheels, with brake Ø 125 mm. Side steel handle; rubber-coated worktop and ABS tool compartment. Composed of 7 drawers with telescopic guide and automatic hooking system, fully rubber lined Automatic lock system -centralized Drawer dimensions: - n° 5 398 x 580 x 54 h - n° 2 398 x 580 x 83 h

Dimension 790 x 480 x 990h mm

Capacity 45 kg x drawer

Weight 67 kg

NET PRICES VALID UNTIL 31.07.2016 (VAT EXCLUDED)

€ 599.00

Mro

Security

centralized locking system

Code E8300GP7

€ 349.00

Vulcanized rubber wheels, with brake Ø 125 mm. . Ergonomic Side handles, EVA top mat and EVA foam matting drawers side spray can holder. Smooth-running Drawers size: - n° 5 398 x 580 x 75 h - n° 2 398 x 580 x 154 h

Dimension 730 x 459 x 1000h mm

Capacity 35 kg x drawer

Weight 66 kg

NET PRICES VALID UNTIL 31.07.2016 (VAT EXCLUDED)

Mro

Choose your assortment

€ 569.00 Code E8400ASSORINDU INDUSTRIAL ASSORTMENT Set of 14 combination wrenches Set of 8 double open end wrenches Set of 7 screwdrivers Set of 8 hexagonal T-handle male wrenches Set of 2 hammers Set of 3 pliers Set of 25 socket wrenches 1/2” Set of 8 socket wrenches Set of 9 bent hexagonal male wrenches Hacksaw 300 mm Electrician’s micro-toothed shears Cutter 155 mm

€ 799.00 Code E8500ASSORTOP TOP ASSORTMENT Set of 14 combination wrenches Set of 8 double open end wrenches Set of 8 bent ring spanners Set of 10 offset socket wrenches Set of 7 screwdrivers Set of 2 hammers Measure set (7 pieces) Set of 3 pliers Pliers set for rings (8 pieces) Set of 33 socket wrenches 1/4” Set of 25 socket wrenches 1/2” Set of 9 hexagonal bent male wrenches Hacksaw 300 mm Electrician’s micro-toothed shears 6 Pin punch set Cutter 155 mm

NET PRICES VALID UNTIL 31.07.2016 (VAT EXCLUDED)

Mro

WHEELED SERVICE TOOL CASE - WRK Hard sided roller case, polyethylene shell with thick aluminum strip, stainless steel hinge and reinforced angles. Stackable, large capacity tool box. Ideal for manual, power tools and spare parts. Provided with document holder pocket, tool holder panel with rubber straps TSA-approved locks, (suitable for customs inspections) telescopic handle, ball bearing wheels, ergonomic rubber coated push handle. All tool case supplied without tools.

Code F7161TROL TOP Dimensions: 505 x 441 x 348 mm Weight: 8.7 kg

€ 240.00

General features: - 2 metal lid safety support stays - Telescopic andle and large wheels provided with ball bearings - Ergonomic handle, rubber coated grip - 2 pallets with elastics, one with elastics on one side and the other with elastics on both sides and a large pocket with closing flap - 1 document pocket - 3 small component boxes - 2 handles - 2 TSA locks with keys

Code F7162TROL HIGH

€ 180.00

Dimensions: 483 x 412 x 257 mm Weight: 5.5 kg General features: - 2 metal lid safety support stays - 2 metal locks with keys - 3 metal hinges for maximum strength - Ergonomic handle, rubber coated grip - Telescopic handle - Wheels on ball bearings - 1 lid tool pallet with elastics on one side - 1 bottom tool pallet with elastics on one side - Bottom area with removable dividers

Code F7165TROL START

€ 99.00

Dimensions: 480 x 375 x 224 mm Weight: 4.9 kg Shock-proof ABS shell, aluminum profile profile frame between lid and bottom, 2 tool boards with elastic bands and document pocket. Internal thermoformed tray, central combination locking system, two side key locks.

NET PRICES VALID UNTIL 31.07.2016 (VAT EXCLUDED)

Mro

Code K400510 EYEWEAR PROTECTION WHTH SUN LENSES Polycarbonate full rim glossy black frame, anallergic bridge nose. High-comfort shades providing true colour recognition.

€ 8.00 each (min 10 pcs)

Green G15 UV 400 filter 5 - 3.1 Sun filter grade Optical class 1 F(T) – Low impact energy and high tempt exposure protection VS impact N - Anti-fog K – Scratch resistant EN 166 / EN 170 / EN 172

Code K400610 PROTECTIVE EYEWEAR Excellent ergonomic design, great comfort, trendy eyewear. Featuring anallergic, non-slip nose pad. Its wraparound lens design provides extra side coverage. Shiny red frame, clear lens. Shock-proof, UV protection.

€ 8.00 each (min 10 pcs)

Clear UV400 lens 1.2 – Clear lens Optical class 1 F(T) – Low impact energy and high tempt exposure protection VS impact N - Anti-fog K – Scratch resistant

Our Italian Workwear line is designed and produced with a confortable design and a great style. Comfortable Stylish Safe Italian

Unbrushed pile/fleece fabric 100% cotton

Fabric 92% texlon 8% polyamide

Fabric 65% gabardine 35% cotton with inner net lining

WINTER VESTS Code

€

Size

K0890S S

K0890M

K0890L

K0890XL

K0890XXL

49.00 L

XXL

SWEATSHIRT Code

€

Size

TROUSERS K0480S S

K0480M

K0480L

48.00 L

NET PRICES VALID UNTIL 31.07.2016 (VAT EXCLUDED)

K0480XL XL

K0480XXL XXL

Code

€

Size

K0550S S

K0550M

K0550L

K0550XL

K0550XXL

39.00 L

XXL

Mro

SAFETY SHOES - LOTTO

SPRINT

Suede uppers, Air Mesh lining, polyethylene foam insole, dual-density polyurethane sole, Kevlar fabric anti-puncture midsole, 200 joule steel toe.

€ 45.00

Code

Size

IT Size

Code

Size

IT Size

K115038 K115039 K115040 K115041 K115042

5.5 6 7 8.5 9

38 39 40 41 42

K115043 K115044 K115045 K115046 K115047

10 10.5 11 11.5 12

43 44 45 46 47

STREET Leather uppers: Suede and synthetic material, highly breathable fabric combined with anti-slip micro fabric lining, insole: PU expanded+ EVA-rubber sole/ high-flexibility zero perforation midsole, composite FLY cap.

€ 65.00

Code

Size

IT Size

Code

Size

IT Size

K164038 K164039 K164040 K164041 K164042

5.5 6 7 8.5 9

38 39 40 41 42

K164043 K164044 K164045 K164046 K164047

10 10.5 11 11.5 12

43 44 45 46 47

SAFETY SHOES - DIKE

AGILITY

Suede leather uppers, high-performance lining, made in open-pore fabric to vent stuffy air and humidity while walking for dry, healthier feet. Compact PU sole, midsole in expanded PU, ultralight cast aluminum toe cap, anti-perforation insole, highly resistant and flexible, high-density, EVA anatomically shaped, removable footbed.

€ 47.00

Code

Size

IT Size

Code

Size

IT Size

K168038 K168039 K168040 K168041 K168042

5.5 6 7 8.5 8.5

38 39 40 41 42

K168043 K168044 K168045 K168046 K168047

9 10.5 11 11.5 12

43 44 45 46 47

MADE IN ITALY

RAVING

Drummed suede calf leather uppers, high-performance lining, made in open-pore fabric to vent stuffy air and humidity while walking for dry, healthier feet. Compact PU sole, midsole in expanded PU, ultralight cast aluminum toe cap, anti-perforation highly resistant and flexible, high-density insole, EVA anatomically shaped, removable footbed.

€ 65.00

Code

Size

IT Size

Code

Size

IT Size

K171538 K171539 K171540 K171541 K171542

5 6 7 8 8.5

38 39 40 41 42

K171543 K171544 K171545 K171546 K171547

9 10 11 11.5 12

43 44 45 46 47

MADE IN ITALY

NET PRICES VALID UNTIL 31.07.2016 (VAT EXCLUDED)

Mro

KIT 3 PCS

€ 349.00

190 mm

165 mm

185 mm

202 mm

165 mm

PNEUMATIC AXIAL GRINDERS

REVERSIBLE PNEUMATIC IMPACT WRENCHES

REVERSIBLE PNEUMATIC DRILLS

Code L125006

Code L001012

Code L101010

Coated housing sander. Safety device 0.43 Hp power.

Dual-mass (twin hammer) swing mechanism composite housing with back loader. MBC rubber coated handle.

Right/left traction reversible drill machine. Composite material pistol-grip design with keyless chuck.

Square drive (socket): 1/2” max screws ø: M16 Ultimate Torque Nm: 690 Vacuum speed rate rpm: 8500 Noise dbA: 97.5 Air entry coupling - consumption: 1/4” - 133 l/min Weight kg: 1.94

Chuck capacity mm: 10 Chuck coupling: 3/8” Vacuum speed rate Watt: 0.5HP Air coupling: 1800 Noise dBA: 83 Air entry coupling - consumption: 1/4” - 74 l/min Weight Kg: 1.1

Pliers mm: 6 Vacuum speed rate Watt: 0,43HP Rpm mm: 20000 Air coupling dBA: 86.3 Air entry coupling - consumption: 1/4” - 113 l/min Weight Kg: 0.55

NET PRICES VALID UNTIL 31.07.2016 (VAT EXCLUDED)

Mro

High performances

Suitable for steel, alloyed steel, stainless steel, cast iron and non-ferrous materials.

Free from additives containing iron, sulfur and chlorine.

Flat cut-off disc Code G020511510

Code G020512516

€ 35.00 (20pcs) ø 115 x 1.0 x 22.2 mm

€ 35.00 (20pcs) ø 125 x 1.0 x 22.2 mm

Code G020511516

Code G020523020

€ 35.00 (20pcs) ø 115 x 1.0 x 22.2 mm

€ 25.00 (10pcs) ø 230 x 2.0 x 22.2 mm

Code G020512510 € 35.00 (20pcs) ø 125 x 1.0 x 22.2 mm

Depressed centre grinding wheels Code G030511530

Code G031511560

€ 12.00 (10pcs) ø 115 x 3.0 x 22.2 mm

€ 19.00 (10pcs) ø 115 x 6.0 x 22.2 mm

Code G030523030

Code G031523060

€ 28.00 (10pcs) ø 230 x 3.0 x 22.2 mm

€ 42.00 (10pcs) ø 115 x 6.0 x 22.2 mm NET PRICES VALID UNTIL 31.07.2016 (VAT EXCLUDED)

Mro

FIBER SUPPORT

ø 115 mm Mono-lamellar-type execution Cost-effective, high-performance product Full consumption of the disc

ø 115 mm Mono-lamellar-type execution High-performance product

Applications: steel, cast iron, aluminum and light alloys. Code G1214115040 - Grit 40 - 20 pcs - € 26.50 Code G1214115060 - Grit 60 - 20 pcs - € 26.50

ø 115 mm Bi-lamellar-type execution Superimposed pairs supplement abrasive Performances up to 30% higher than the standard zirconium type Cold machining and self-lubricating Requires low pressures by the operator Application: Ideal for all kinds of steel, yet unmatched for stainless steel, high alloy steel, cast iron. Code G1223115040 - Grit 40 - 20 pcs - € 67.60 Code G1223115060 - Grit 60 - 20 pcs - € 67.60

Applications: stainless steel, ferrous and non-ferrous materials. Code G1305115040 - Grit 40 - 10 pcs - € 21.80 Code G1305115060 - Grit 60 - 10 pcs - € 21.80 Code G1305115080 - Grit 80 - 10 pcs - € 21.80

ø 115 mm Mono-lamellar-type execution Combined zirconium/ceramic cloth Less vibration and noises Cold Machining technology High abrasive performances and good surface finishing High power grinded recommended Application: stainless steel, high-alloy steel, titanium, aluminum and bronze. Code G123740 - Grit 40 - 20 pcs - € 39.00

SOFT FLAP DISCS Zirconium flap grinding disc The flaps’ angular positioning guarantee superior flexibility Twenty times longer service life Recommended for angles, shaped edges and corrugated surfaces machining

ø 115 mm Code G1410115040 - Grit 40 - 20 pcs - € 93.60 Code G1410115060 - Grit 60 - 20 pcs - € 96.50 Code G1410115080 - Grit 80 - 20 pcs - € 96.50

NET PRICES VALID UNTIL 31.07.2016 (VAT EXCLUDED)

Application: All materials for average power grinders. With MINI-FOX discs you can also have high performances in restricted areas.

ø 50 mm Code G1415050040 - Grit 40 - 25 pcs - € 86.00 Code G1415050060 - Grit 60 - 25 pcs - € 86.00 Code G1415050080 - Grit 80 - 25 pcs - € 86.00 Code G1415050120 - Grit 120 - 25 pcs - € 86.00

Mro

Aluminum Oxide Corumdom

Aluminum Oxide Corumdom + Additive

Zirconium

Zirconium + Additive

Ceramic

Ceramic + Additive

Silicon Carbide

Conic shaped backing pads

Flat shaped backing pads

PLASTIC BACKING FLAP DISCS

ø 115 mm

Mono lamellar execution Cost-effective, high-performance

Bi-lamellar execution Long-lasting, quality performances

Application: iron, plastic, polish, lacquer as well as on nonferrous materials.

Application: ideal for stainless steels, as well as cast-iron, aluminum, light alloys.

Code G1230115040 - Grit 40 - 20 pcs - € 27.60 Code G1230115060 - Grit 60 - 20 pcs - € 27.60 Code G1230115080 - Grit 80 - 20 pcs - € 27.60

Code G1215115040 - Grit 40 - 10 pcs - € 18.30 Code G1215115060 - Grit 60 - 10 pcs - € 18.30 Code G1215115080 - Grit 80 - 10 pcs - € 18.30 Code G1215115120 - Grit 120 - 10 pcs - € 18.30

ø 115 mm Bi-lamellar execution Reinforced plastic support Higher removal capacity Application: carpentry work and can be used for steel, cast iron and light alloy machining. Code G1216115040 - Grit 40 - 20 pcs - € 51.70 Code G1216115060 - Grit 60 - 20 pcs - € 51.70

ø 115 mm Bi-lamellar execution Application: aluminum, copper, bronze, titanium, stone and highalloy steels, synthetic materials. Code G1235115040 - Grit 40 - 20 pcs - € 40.00 Code G1235115080 - Grit 80 - 20 pcs - € 40.00 Code G1235115120 - Grit 120 - 20 pcs - € 40.00 Code G1235115220 - Grit 220 - 20 pcs - € 40.00

ø 115 mm Bi-lamellar execution Alternating zirconium and cooled corundum Superimposed pairs for an increased abrasive surface High removal capacity and a high-quality finishing Application: Ideal for heavy use in carpentry on all materials. Code G1205115040 - Grit 40 - 15 pcs - € 44.00 Code G1205115060 - Grit 60 - 15 pcs - € 44.00

ø 115 mm Bi-lamellar execution Grinding discs with reinforced thick plastic support Larger abrasive surface and longer service life +20% increasing performance compared to standard discs Recommended use with high power grinder Application: stainless steel, high-alloy steel, yet also suitable for cast iron and titanium use. Code G1240115040 - Grit 40 - 15 pcs - € 52.70 Code G1240115060 - Grit 60 - 15 pcs - € 52.70 NET PRICES VALID UNTIL 31.07.2016 (VAT EXCLUDED)

Mro

Sheet steel top (Multiplex, 30mm- thick wood top), pre-assembly three perimeter edges designed to accommodate drawers and drawer cabinets. Capacity 1000 kg.

Multiplex 30mm thick wood top

Sheet steel top

Code P00251000 - 1024 x 750 x 880h - € 159.00 Code P00251500 - 1500 x 750 x 880h - € 194.00 Code P00252000 - 2000 x 750 x 880h - € 237.00

1.5mm shelves

TROLLEYS 3 SHELVES With reinforced corners. Capacity max 90 kg. Dimensions mm: 800 x 440 x 810h

Code P00151000 - 1031 x 705 x 855h - € 135.00 Code P00151500 - 1507 x 705 x 855h - € 174.00 Code P00152000 - 2007 x 705 x 855h - € 210.00

Easy to assemble

Code P5138M - € 119.00

A disassembled trolley

80mm wheels

NET PRICES VALID UNTIL 31.07.2016 (VAT EXCLUDED)

ASPIRATORS TRAMP OIL SEPARATORS CUTTING OILS MINERAL FLUIDS LUBRICANT SPRAYS

LUBRIcants and machinery

Supply voltage 400 V / 50 H2 three-phase, Superior quality solution for removing oil mists, fumes and vapors generated Innovative integrated “SELF CLEANING” centrifugal system for pollutant reduction Additional modules with high filtering surface (POST-FILTER), easily combined the AFM Series. Eliminates micro-mists and burnt oil and noxious fumes They efficiently reduce emissions up to 99.98% (according to EN 779 - EN1822). Moreover, their versatility ensures full satisfaction of all customer requirements. Maintenance costs reduced by half thanks to innovative abatement systems; Healthier and cleaner work environments Complete with Filter Clogging Detection Device with signaling indicator light.

Code

€

Model

H5410500 H54101000 H54101500 H54102000 H54102500 H54103000

1,300.00 1,500.00 1,650.00 1,950.00 2,100.00 2,250.00

AFM 500-B AFM 1000-B AFM 1500-B AFM 2000-B AFM 2500-B AFM 3000-B

Code

€

Model

H5420500 H54201000 H54201500 H54202000 H54202500 H54203000

1,800.00 2,100.00 2,200.00 2,650.00 2,750.00 3,100.00

AFM 500-F AFM 1000-F AFM 1500-F AFM 2000-F AFM 2500-F AFM 3000-F

Suction m/s 500 1000 1500 2000 2500 3000

Suction m/s 470 950 1450 1920 2430 2900

NET PRICES VALID UNTIL 31.07.2016 (VAT EXCLUDED)

Power kW 0.37 0.55 0.75 1.1 1.5 2.2

Asp. ø mm 100 125 150 200

Noise Level dBA 62 64 66 68 71 72

H2o 84 89 92 96 110 122

Weight kg 35 48 52 60 65 73

Weight kg 50 65 70 80 85 97

LUBRIcants and machinery

Code

€

Model

For aspirators

H5450500 H54501500 H54502500 H54503000

350.00 400.00 450.00 550.00

PF 500 PF 1500 PF 2500 PF 3000

AFM 500 AFM 1000 and AFM 1500 AFM 2000 and AFM 2500 AFM 3000

ACCESSORIES: ASSEMBLY KIT FOR MIST ASPIRATORS TO SEE MORE KITS CONSULT THE USER MANUAL

KIT 1 - Edge machine for direct AFM-B Code H5460KITM1 - € 220.00 Aspirator support h 20 mm Flanged connection h 115 mm Drainage pipe 3 m

KIT 2 - Edge machine for direct AFM-F Code H5460KITM3 - € 230.00 Aspirator support h 20 mm Flanged connection 90° Suction pipe 2 m Drainage pipe 3 m

KIT 3 - Underfloor for direct AFM-B Code H5460KITM4 - € 390.00 Aspirator support h 2000 mm Suction cup Suction pipe 2 m Drainage pipe 3 m

KIT 4 - Underfloor for direct AFM-F Code H5460KITM5 - € 370.00 Aspirator support h 2000 mm Suction cup Suction pipe 2 m Drainage pipe 3 m

KIT 5 - Edge machine for direct AFM-B Code H5460KITM9 - € 290.00 Aspirator support h 20 mm Flanged connection 90° Suction pipe 2 m Drainage pipe 3 m NET PRICES VALID UNTIL 31.07.2016 (VAT EXCLUDED)

LUBRIcants and machinery

Your emulsion shall be degreased

in 24-hours

€ 2,745.00 Tank capacity Lt 105

Code H4000TOS1.0 Tramp oil, oil sludge and foam in the emulsion Save time and money by extending the emulsion’s service life No Lubrication oil fumes and bad smells Eliminates bacteria and mould Electric panel features IP 65 protection

Reduce chemical and biological risks Sucked in fluid max temperature: 60° C

Dimensions: 570 x 550 x 980h mm Flow: 420 l/h Ambient temperature: +5°C ± +40°C Installed power: Kw 0.52 Engine nominal power: Kw 0.25 Voltage supply: 230 V a 50Hz Un-laden weight: Kg 70

Dynamic float with magnet

Code H4000P130 € 250.00

NET PRICES VALID UNTIL 31.07.2016 (VAT EXCLUDED)

Compact and easy to install

LUBRIcants and machinery

Code N4500130 COMPLETE ASPIRATOR

Aspirates liquids and solids

Pipe union for suction hose

Separate them Filter liquids Put them back into the machine tool Improving safety and work environment Trolley transport system Characteristics: Power (single-phase) kW/HP 2.4 / 3 Max. depression mm/H2O 2200 Air capacity l/min. 3360 Noise level dB(A) 76 Suction mouth mm 50 Liquid discharge pipe ø 1” Weight kg 195

€ 2,750.00

Tank capacity l 130

Solid material container l 37

Drastically reduces replacement costs for oils and coolants Code

€

Description

N4500145 N4520105 N4520110 N4500150 N4500135 N4500140

48.00 29.00 40.00 7.00 38.00 17.00

Hose 3m - ø 50mm Flat lance with mm 50 ø coupling Conical lance with mm 50 ø coupling Cloth filter TNT Stain-resistant nozzle mixes Stain-resistant conical lance NET PRICES VALID UNTIL 31.07.2016 (VAT EXCLUDED)

LUBRIcants and machinery Engine cover

Code N452535 COMPLETE ASPIRATOR

€ 1,250.00

The most compact in its category Mini storm is an industrial-use, single-phase aspirator for solid materials. Powerful and reliable vacuum tool, ideal for non-continuous works. Equipment: - Full polyurethane hose ø 50 mm / 3m - Adapter 70 / 50 mm - Elastometer compound antistatic conical lance and flat lance L 350 mm - Antistatic rubber sleeve/nozzle Voltage Volt/Hz 230 / 50-60 power (mono-phase) kW/HP 2.2 - 3 Max. depression mm/H2O 2160 Air capacity m3/h 340 Filtering surface cm² 15.000 Protection class IP 44 Noise 70 Container 45 Suction inlet mm 70 Dimensions mm 510x520x1240 h Weight Kg 45

Code

€

N4500145 N452540 N4520105 N452545 N452550

50.00 25.00 28.00 20.00 20.00

Filter housing

Pipe union for suction hose

Container

Voltage Volt/Hz Hose 3m - ø 50mm Galvanized terminal M/F 70/50 Flat lance with mm 50 ø coupling Antistatic rubber sleeve Primary filter

Cleaning filter lever

Three independent bypass motors, powerful and silent Cyclone and tangential air inlet with release, quick accessory attachment device. Trolley transport system with braking wheel Removable container for suctioned materials Tank capacity l 100 Power (single-phase) kW/HP 3.3 - 4.5 Max. depression mm/H2O 2160 Air capacity l/min. 492 Noise level dB(A) 76 Suction mouth mm 80 Dimensions mm 800x650x1640 Weight kg 70 Equipment: - Complete polyurethane hose 50mm ø / 3m 80/50 mm reduction - Elastomer compound conical lance with connection - Flat lance ø 50 mm / L 350 mm - Curved extension connection

Code

€

Description

N4500145 N4520115

50.00 35.00

N4520125

20.00

N4520105 N452545 N4520110 N4520120 N4520130

28.00 20.00 40.00 90.00 138.00

Hose 3m - ø 50mm Zinc-coated terminal m/f 80/50 ø Antistatic Conical Lance in Elastometric Compound ø 50/38 Flat lance with mm 50 ø coupling Antistatic rubber sleeve Conical lance with mm 50 ø coupling PUR tube for aspirators 5 m 50 ø Primary filter class M

NET PRICES VALID UNTIL 31.07.2016 (VAT EXCLUDED)

Code N4520100 COMPLETE ASPIRATOR

€ 1,690.00

Filter housing

Suction pipe connection

LUBRIcants and machinery

Suitable for: ANY KIND OF MACHINE

System designed to replace the traditional lubrication with oil emulsion The micro pneumatic pumps dosing the minimum amount of lubricant transported by a flow of compressed air towards the contact point tool/ workpiece without creating fog or pollution. The lubricant is consumed only during the processing phase

Increase productivity Reduce Time Reduce Costs 1 nozzle H14521 - € 499.00 2 nozzles H14522 - € 585.00

Free from mineral oil

Formulated for tapping and cutting operations For difficult-to work material High degree of lubrication

Excellent EP properties Excellent lubricating effect Good wetting of surfaces to be machined

Extraordinary adhesion capacity to the tool Code H13200,5 H13205

€ 14.00 88.00

Bottle Can

ml / l



500 5

6 1

Code H13225

€ 55.00

Lt Can

NET PRICES VALID UNTIL 31.07.2016 (VAT EXCLUDED)

LUBRIcants and machinery

€ 13.50 High coolant and lubricant capacity. Cutting operations on aluminum and yellow alloys chlorine-free.

Code H13401 1 Lt can (4 pcs box)

€ 13.50 Code H13501 1 Lt can (4 pcs box) For light machining of steel and stainless steel. Suitable for lubricating mechanical couplings during assembly.

€ 55.00 Code H13505 5 Lt can (1 pcs)

NET PRICES VALID UNTIL 31.07.2016 (VAT EXCLUDED)

€ 5.50 Code H13400,4 400 ml spray can (12 pcs box)

€ 5.50 Code H13500,4 400 ml spray can (12 pcs box)

LUBRIcants and machinery

€ 1,150.00 Code H0010200 200 Lt drum

≤50 BAR

Unitec 2K combines high mineral oil content and high-tech EP additives. Suitable for hard machining and for finishing operations Application: steel in general, hardened and tempered steel, aluminum, aluminum alloys, stainless steel, nickel alloys, magnesium, brass, bronze, exotic alloys. Water types, steadily emulsifying with up to 40F° water hardness.

€ 178.00 Code H001025 25 Lt can

€ 39.00 Code H00105 5 Lt tank

≤50

€ 1,335.00

BAR

Excellent lubrication thanks to its high percentage of biodegradable stabilized plant bases (<30%). This fluid is formulated to be used on CNC tool machines, in milling, turning, drilling, tapping, boring. Recommended for emulsification with water with a hardness range from 15° up to 40° French.

Code H0210200 200 Lt drum

€ 198.00 Code H021025 25 Lt can

NET PRICES VALID UNTIL 31.07.2016 (VAT EXCLUDED)

LUBRIcants and machinery

AIR BLADE Thanks to air blades you can constantly control you machining Big air mass thanks to Koanda effect 6/7 bar power The Air blades produce a rectilinear air flux ranging from 1 meter to 1.50 meters depending on air pressure. APPLICATIONS: chip control barriers fume and oil mist reduction metalworking machine internal glasses cleaning finished pieces cleaning, chip and lubricant removal chip evacuation drying of painted items cooling of molded pieces

€ 390.00

246

30°

Code 1103244 165

246

magnet with 70kg power traction 66

30°

205

165

205

Code H362210 - AIR COOLER

€ 160.00

Compressed air-operates cooling system(patented). Delta 40 converts compressed air into two air flows. Light, compact and cost-effective, it operated immediately, engineered by using sturdy, anti-corrosion materials.. easy to install thanks to its specifically designed adjustable clamp. Temperature detected on coupling with an inlet air temperature of 20°C. Weight 150g

€ 398.00

Code H36243 - AIR COOLER In addition to the standard air cooling feature, DELTA 40 TRIPLE offers up to three time as much air flux. Workpieces, chips and tools are cooled and chips blown away from working area. Generate three time the volume of cooled air, Perfect for heavy-duty tools. Weight 760g

NET PRICES VALID UNTIL 31.07.2016 (VAT EXCLUDED)

LUBRIcants and machinery

Emulsion maintenance

PH-CONTROL PAPER 0-14 BELT OIL SKIMMERS

Check PH value of your emulsion. Too low pH value can generate oxidation processes or be a symptom of the formation of bacterial colonies and/or of the presence of extraneous elements, while a too high pH value is among the main causes of operator skin irritation; daily use is recommended.

5 Benefits of use The LTEC range of oil separators currently represent the best removal solution for solving problems caused by pollutants in oil-emulsion cooling lubricants and in the water of washing machines for pieces. • Prevents microbial degradation of fluid in operation • Improves production standards • Inhibits the production of noxious fumes and mists • Reduces machine contamination • Eliminates downtime caused by the need for manual oil removal Tech. Code

€

H4035400

445.00

Tape mm 400 x 50

Mono-phase motor V - Hz 230 - 50 / 60

Weight kg 6.5

Tech. Code

€

H3609100

28.00

Box

100 pcs package

WATER HARDNESS CONTROL PAPER Papers for controlling the emulsion water hardness are used to verify this value. If the value is higher than 50° French, the emulsion may separate; it must be topped up with emulsion made with demineralised water. The emulsion hardness tends to increase during use due to the evaporation of water and the high concentration of minerals dissolved in it; weekly use is recommended. Tech. Code

€

H3615100

39.00

Jar

100 pcs package

VOLUMETRIC MIXER MIX RITE

OPTICAL REFRACTOMETER

This device is actuated solely by water pressure and ensures the formation of stable emulsions. Applying a pressure regulator at the water outlet and memorizing the position of the mixer knob will produce emulsions with the required concentration percentage. It is self-priming and can be used even for very high flow rates.

The refractometer is an optical instrument that measures the refractive index of a fluid in order to determine the concentration percentage of cooling lubricant emulsions. Its daily use allows verification of the correct concentration of the emulsion in the tank in order to prevent waste, protect the tool machine and reduce the total production costs.

Tech. Code

€

Capacity

H361010

530.00

3-10%

Max. flow l/h 2500

Tech. Code

€

Model

Divisions %

H3630032

112.00

0-32%

0.2

NET PRICES VALID UNTIL 31.07.2016 (VAT EXCLUDED)

LUBRIcants and machinery

High-quality lubricant Contains solvents of natural origin QUICK PENETRATING RELEASE AGENT WITH LUBRICATING ACTION Suitable for oxidized and corroded mechanical parts thanks to its high penetrating power. New triple-action spray nozzle for targeted and widerange vaporization, it also works upside down. Does not contain chlorinated solvents. Retains, lubricates, cleans, removes moisture and prevents corrosion.

â&#x201A;Ź 4.90 (min 12 pcs)

Code J2120400

NET PRICES VALID UNTIL 31.07.2016 (VAT EXCLUDED)

cranes Hoists magnets

HANDLING

ELECTRIC CHAIN HOISTS BMH Auto break electric motor. Available as 1 speed (optional) and 2 speed (standard version). Highly resistance, plastic material upward and low stroke-end cushioning. Standard hook run-3m. Low voltage control keyboard (42V). Emergency overload device.

Tech. Code

€

Capacity Kg

Model

M00150200 M00150500 M00151000

1,180.00 1,590.00 1,890.00

200 500 1000

BMH 200/1NF BMH 500/1NF BMH 1000/1NF

FEM CLASS ISO

SPEED m/min

NR. SECTIONS Chain

Weight Kg

8-2

14 23 51

3m (M6) 1Bm (M3)

COLUMN MOUNTED JIB CRANES WITH GIS KB ARM

The geometry of the column and the boom's structural shape gives crane maximum rigidity. Standard equipment: - Hoist trolley - Power supply system with flat cable and cable box trolleys - Three- pole switch - Instruction manual for assembly, use and maintenance

68 NET PRICES VALID UNTIL 31.07.2016 (VAT EXCLUDED)

620

400

1920 2130 3960

4 8

Weight kg

740

7 12 17

NUMBER OF TIE RODS

330

TIE ROD TRACTION Kg

3140

560

EXTENSION TYPE

350

560

FOUNDATION TYPE**

3720

4000

D mm

3382

S mm

300

Q mm

3855

G* mm

4000

F mm

SC200/4000 TER SC500/4000 TER SC1000/4000 TER

A mm

200 500 1000

EXTERNAL HOOK POSITION B mm

M125002004000 1,350.00 M125005004000 1,850.00 M125010004000 2,250.00

STRADDLE C mm

€

Model

Tech. Code

Capacity Kg

DIMENSIONS AND TECHNICAL DATA FOR TER MODEL

330 465 580

HANDLING

LIFTING MAGNETS Bux NEO series lifting magnets are neodymium based permanent magnets. made with a new material three times better than ferromagnet. NEO magnets are extremely light Compact design and easy to use.

SAFETY The magnetic power remains unaltered over time. All magnets are equipped with the most advanced security system. Efficiency equals 3,5 times stated capacity.

Application: V-shaped plates make them fit to handle both flat (also narrow profile plates and bars) and round shapes items ( tubes and rods). Benefits: Its magnet quick load system allows reduced lifting and handling time. No more risks of chains or other slings damaging the load. Bulky and heavy loads can be easily handled by a single operator. No more sharp edges representing a risk for chains or lifting systems. Fit to loads up to 1000kg.

Actuation lever of the magnetic field with safety device to prevent improper or accidental disconnections.

€ 350.00

Workload Limit for plates (kg) 125 for rounds (kg) 40 Ø min/max (mm) 50/100 * Testload (kg) 400 Weight (kg) 3 Width (mm) 93 Height (mm) 60 Crown height (mm) 164 * Tested with a mild steel plate, rectified, 50 mm

Code M8020125 Plate Thickness (S) (mm)

Clean and smooth plane surface ∆ < 0,1 mm L max x W Workload max (mm) max (kg)

Rusty and hot rolled surface ∆ = 0,1÷0,3 mm L max x W Workload max (mm) max (kg)

Irregular and rough surface ∆ = 0,3÷0,5 mm L max x W Workload max (mm) max (kg)

≥25

125

1900 x 500

115

1100 x 500

900 x 500

2300 x 500

110

1500 x 500

1200 x 500

2500 x 500

2300 x 500

1700 x 500

1500 x 500

1300 x 500

1200 x 500

Rounds Ø (mm) 50-100

2500

1700

1500

NB: Plates L and W must be at least 200 x 200 mm

€ 495.00

Workload Limit for plates (kg) 250 for rounds (kg) 125 Ø min/max (mm) 60/200 * Testload (kg) 800 Weight (kg) 10 Width (mm) 152 Height (mm) 100 Crown height (mm) 164 * Tested with a mild steel plate, rectified, 50 mm

Code M8020250 Plate Thickness (S) (mm)

Clean and smooth plane surface ∆ < 0,1 mm L max x W Workload max (mm) max (kg)

Rusty and hot rolled surface ∆ = 0,1÷0,3 mm L max x W Workload max (mm) max (kg)

Irregular and rough surface ∆ = 0,3÷0,5 mm L max x W Workload max (mm) max (kg)

≥30

250

170

105

1750 x 1000

205

1250 x 1000

150

1000 x 800

2200 x 1000

170

1650 x 1000

130

1100 x 1000

2100 x 1000

100

1650 x 1000

1300 x 1000

1600 x 1000

1400 x 1000

1150 x 1000

Rounds Ø (mm) 60-200

2500

125

3000

100

2500

NB: Plates L and W must be at least 300 x 300 mm

NET PRICES VALID UNTIL 31.07.2016 (VAT EXCLUDED) 69

HANDLING

LIFTING MAGNETS

€ 595.00 Workload Limit for plates (kg) 500 for rounds (kg) 250 Ø min/max (mm) 65/270 * Testload (kg) 1600 Weight (kg) 20 Width (mm) 246 Height (mm) 120 Crown height (mm) 164 * Tested with a mild steel plate, rectified, 50 mm

Code M8020500 Plate Thickness (S) (mm)

Clean and smooth plane surface ∆ < 0,1 mm L max x W max (mm)

Workload max (kg)

Rusty and hot rolled surface ∆ = 0,1÷0,3 mm L max x W Workload max (mm) max (kg)

Irregular and rough surface ∆ = 0,3÷0,5 mm L max x W Workload max (mm) max (kg)

≥40

500

380

225

1800 x 1500

425

1650 x 1250

320

1400 x 1000

220

2250 x 1500

400

2050 x 1250

300

1750 x 1000

205

2500 x 1500

270

2350 x 1250

200

2150 x 1000

165

2300 x 1500

195

2250 x 1250

160

2150 x 1000

125

2000 x 1500

125

2000 x 1250

100

2000 x 1000

Rounds Ø (mm) 65-270

4000

250

3500

200

3000

150

NB: Plates L and W must be at least 400 x 400 mm

€ 995.00

Workload Limit for plates (kg) 1000 for rounds (kg) 500 Ø min/max (mm) 100/300 * Testload (kg) 3200 Weight (kg) 40 Width (mm) 305 Height (mm) 140 Crown height (mm) 216 * Tested with a mild steel plate, rectified, 50 mm

Code M80201000 Plate Thickness (S) (mm)

Clean and smooth plane surface ∆ < 0,1 mm

Rusty and hot rolled surface ∆ = 0,1÷0,3 mm L max x W Workload max (mm) max (kg)

Irregular and rough surface ∆ = 0,3÷0,5 mm L max x W Workload max (mm) max (kg)

L max x W max (mm)

Workload max (kg)

≥60

1000

845

650

2450 x 1500

860

2000 x 1500

730

1900 x 1250

565

2850 x 1500

830

2400 x 1500

705

2250 x 1250

550

3200 x 1500

745

2750 x 1500

640

2600 x 1250

510

3300 x 1500

500

2900 x 1500

445

2800 x 1250

380

2750 x 1500

265

2550 x 1500

240

2650 x 1250

200

Rounds Ø (mm) 100-300

4500

500

4000

400

3500

300

NB: Plates L and W must be at least 500 x 500 mm

70 NET PRICES VALID UNTIL 31.07.2016 (VAT EXCLUDED)

NOTES

NET PRICES VAT EXCLUDED - UNTIL 31.07.16