9833 WHT front cov.:Layout 1
1/16/08
9:13 AM
Page 1
P R O V E N T O O L S™ F O R R E S E A R C H
2008-09 CATALOG
2008-09
PRODUCT
CATALOG
1
!MPULES
651462 Series
651482 Series Pre-Scored
#RYULE ¬#RYOGENIC¬!MPULE • For biological sample preservation • Allows for storage at low temperatures • Can be used in the gas phase of liquid nitrogen
These glass cryogenic vials are designed for preserving biological materials with liquid nitrogen. They are made of Wheaton 33 low extractable borosilicate glass that conforms to USP Type I and ASTM Type I, Class A requirements. The special design allows for storage at low temperatures as well as rapid thawing.
Wheaton ampules are all glass containers that can be hermetically sealed to preserve sample purity and extend sample shelf life. Wheaton ampules are ideal for standards packaging, environmental and diagnostic standards, lyophilization and cryogenic storage. These ampules protect against sample contamination due to their tamper-evident seal. A gold band on the stem of the ampule indicates that the ampule is pre-scored to facilitate snapping off the top of the ampule eliminating the need to file the ampule. Wheaton ampules are offered in sizes ranging from 1 to 50 mL capacity. Our line includes pre-scored, funnel-top, standard, glass Cryule® cryogenic ampules and Vacule® lyophilization ampules. Wheaton can also design a custom ampule to fit your special requirements.
Cat. No.
Size (mL)
Dia x H (mm)
*OD at Top (mm)
651462 651463 651464 651466 651469 651470
1 1.2 1.5 2 5 10
10.5 x 61 11.8 x 58 11.5 x 61 11.5 x 70 16.5 x 98 19.5 x 114
5 5 5 5 8 9
Qty/Case
144 144 144 144 144 144
* Approximate OD
#RYULE ¬#RYOGENIC¬!MPULE ¬0RE 3CORED • • • •
Pre-scored to eliminate filing For biological sample preservation Allows for storage at low temperatures Can be used in the gas phase of liquid nitrogen
These glass cryogenic vials are designed for preserving biological materials with liquid nitrogen. They are made of Wheaton 33 low extractable borosilicate glass that conforms to USP Type I and ASTM Type I, Class A requirements. Their special design allows for storage at low temperatures as well as rapid thawing. Pre-scored ampules eliminate the need for filing. Cat. No.
Size (mL)
Dia x H (mm)
*OD at Top (mm)
651482 651483 651486
1 1.2 2
10.5 x 61 11.8 x 58 11.5 x 70
5 5 5
Qty/Case
144 144 144
* Approximate OD
6ACULE ¬,YOPHILIZATION¬!MPULE¬¬¬¬ • Ideal for small volume lyophilization samples • Heat or stopper sealed
3EALING¬-ETHODS
This small volume lyophilization ampule can be flame-sealed or stored with a stopper in place. They are made of Wheaton 33 low extractable borosilicate glass that conforms to USP Type I and ASTM Type I, Class A requirements. Stoppers can be purchased separately.
Standard Ampules Tip Seal Method: While holding the ampule body, insert the tip of the ampule stem into the sealing flame. Heat the tip approximately 3-4 mm from the top. Gently rotate the ampule while heating the tip until the melted glass fuses into a smooth dome. Funnel-Top Ampules Pull Seal Method: In addition to easier filling, the funnel-top ampule is easier to seal using the Pull Seal method. Hold the funnel top with one hand and the body of the ampule with the other hand. Insert the center of the ampule stem into the sealing flame. As the glass softens, rotate the ampule while pulling the funnel top off. This will require very little force and will allow the glass to seal itself. This method can be used for all ampule configurations.
WHEATON
Cat. No.
Description
651446 W651450
2 mL Vacule 11 mm Stopper
Dia x H (mm)
*OD at Top (mm)
12 x 86 —
10 —
* Approximate OD
¬
1.800.225.1437 (U.S. & Canada only) | +1.856.825.1100 | +1.856.825.1368 (F) | www.wheatonsci.com
Qty/Case
144 144
!MPULES
6ACULE ¬,YOPHILIZATION¬!MPULE ¬0RE 3CORED • Ideal for freeze drying • Pre-scored to eliminate filing • Heat sealed only
These ampules are designed for freeze drying, protein hydrolysis, and microdetermination of ketones and amino acids. The long stem provides a convenient means for heat sealing under vacuum. The pre-scored feature allows for easy opening. They are made of Wheaton 33 low extractable borosilicate glass that conforms to USP Type I and ASTM Type I, Class A requirements. Cat. No.
Size (mL)
Dia x H (mm)
*OD at Top (mm)
651502 651506 651509 651510
1 2 5 10
10 x 108 11.8 x 122 16.5 x 133 19.5 x 154
10 11.75 9 10
Qty/Case
!MPULE ¬&UNNEL 4OP ¬0RE 3CORED • Funnel top provides easier filling • Stem is pull sealed • Available in clear glass only
Pre-scored ampules eliminate the need for filing. Ampules are made from Wheaton 33 low extractable borosilicate glass that conforms to USP Type I and also ASTM Type I, Class A to prevent change of pH and to maintain the purity of contents. Cat. No.
Size (mL)
Dia x H (mm)
176732 176740
1 10
10.5 x 88 19 x 130
Qty/Case
144 144
144 144 144 144
* Approximate OD
!MPULE ¬3TANDARD¬ • Commonly used for packaging certified standards • Consistent with low background counts
These ampules are utilized for sealed standards used in calibrating liquid scintillation spectrometers. Manufactured from Wheaton 180 low potassium borosilicate glass that meets USP Type I and ASTM Type I, Class A requirements for consistent and low background counts.
!MPULE ¬0RE 3CORED • Pre-scored to eliminate filing • Available in clear or amber glass • Stems can be pull or tip sealed
The stem can be pull sealed or tip sealed to seal the ampule (See sealing methods on previous page). The pre-scored feature saves time by eliminating filing. The clear glass ampules are made of Wheaton 33 expansion low extractable borosilicate glass that conforms to USP Type I and also ASTM Type I, Class A requirements. The amber ampules are manufactured from Wheaton 320 amber borosilicate glass that conforms to USP Type I requirements and protects light-sensitive samples. Cat. No.
Size (mL)
Dia x H (mm)
Qty/Case
1 2 5 10 20 50
10.5 x 67 12 x 75 16.5 x 84 19 x 107 22.5 x 130 29.5 x 175
144 144 144 144 144 144
1 2 5
10.5 x 67 12 x 75 16.5 x 84
144 144 144
Cat. No.
Size (mL)
Dia x H (mm)
176759 176762
7 20
17 x 100 28 x 100
Amber 176792 176796 176799
WHEATON
25 25
!MPULE¬3NAPPER ¬¬ $ISPOSABLE¬ • Protects against glass splinters • Prevents cross contamination
This disposable plastic fracture and safety collar protects against glass splinters when used to break open pre-scored ampules. Just slip the Ampule Snapper over the top of the ampule, slide it down to the pre-scored position, and snap it. The Ampule Snapper and ampule top can be discarded to prevent crosscontamination.
Clear 176772 176776 176779 176780 176782 176784
Qty/Case
Cat. No.
177105
For Ampule Size
1 & 2 mL
1.800.225.1437 (U.S. & Canada only) | +1.856.825.1100 | +1.856.825.1368 (F) | www.wheatonsci.com
Qty/Case
144
2
3
"OTTLES ¬'LASS
60 mL BOD Bottle
"/$¬"OTTLE ¬ ¬M,¬
"/$¬"OTTLES¬
Cat. No.
Wheaton BOD Bottles are ideal for incubating diluted samples of sewage, sewage effluents, polluted waters, and industrial wastes to determine the amount of oxygen required during the stabilization of the decomposable organic matter by aerobic biochemical action. We recommend the 300 mL capacity bottles for the five-day BOD test as referenced in Standard Methods for the Examination of Water and Wastewater, 21st Edition, 5210B, 2005. These BOD bottles have a specially designed shoulder radius that sweeps all air from inside the bottle during filling. The interchangeable stoppers have a tapered bottom that also prevents air entrapment. The bottles have a flared mouth to form a water seal around the stopper that prevents air from being drawn into the bottle during incubation. The stopper joint is compatible with the probes of the leading meters for BOD and dissolved oxygen. All of the BOD bottles have large, permanently screened-on marking areas. The numbered versions of the 300 mL size bottles are supplied with bar codes for quick and accurate recording of bottle numbers. All of the bottles are manufactured from Type I borosilicate glass.
"/$¬"OTTLE ¬ ¬M,¬¬ Cat. No.
Number Sequence
Dia x H (mm)
Qty/Case
With Glass Pennyhead Stopper 227494-00G 227494-01G 227494-02G 227494-03G 227494-99G
Un-numbered 01-36 37-72 73-108 Specials
43 x 115 43 x 115 43 x 115 43 x 115 43 x 115
36 36 36 36 36
43 x 115 43 x 115 43 x 115 43 x 115 43 x 115
36 36 36 36 36
With Glass Robotic Stopper 227494-00 227494-01 227494-02 227494-03 227494-99*
Un-numbered 01-36 37-72 73-108 Specials
2EPLACEMENT¬ 3TOPPERS •
Pennyhead Stopper
300 mL BOD bottle
For 60 mL and 300 mL BOD Bottles
Number Sequence
Dia x H (mm)
Qty/Case
69 x 165 69 x 165 69 x 165 69 x 165 69 x 165 69 x 165 69 x 165 69 x 165 69 x 165 69 x 165 69 x 165 69 x 165 69 x 165 69 x 165 69 x 165 69 x 165 69 x 165 69 x 165 69 x 165 69 x 165
24 24 24 24 24 24 24 24 24 24 24 24 24 24 24 24 24 24 24 24
69 x 165 69 x 165 69 x 165 69 x 165 69 x 165 69 x 165 69 x 165 69 x 165 69 x 165 69 x 165 69 x 165 69 x 165 69 x 165 69 x 165 69 x 165 69 x 165 69 x 165 69 x 165 69 x 165 69 x 165
24 24 24 24 24 24 24 24 24 24 24 24 24 24 24 24 24 24 24 24
69 x 143
24
With Glass Pennyhead Stopper 227497-00G 227497-01G 227497-02G 227497-03G 227497-04G 227497-05G 227497-06G 227497-07G 227497-08G 227497-09G 227497-10G 227497-11G 227497-12G 227497-13G 227497-14G 227497-15G 227497-16G 227497-17G 227497-18G 227497-99G*
Un-numbered 01-24 25-48 49-72 73-96 97-120 121-144 145-168 169-192 193-216 217-240 241-264 265-288 289-312 313-336 337-360 361-384 385-408 409-432 Specials
With Glass Robotic Stopper 227497-00 227497-01 227497-02 227497-03 227497-04 227497-05 227497-06 227497-07 227497-08 227497-09 227497-10 227497-11 227497-12 227497-13 227497-14 227497-15 227497-16 227497-17 227497-18 227497-99*
Un-numbered 01-24 25-48 49-72 73-96 97-120 121-144 145-168 169-192 193-216 217-240 241-264 265-288 289-312 313-336 337-360 361-384 385-408 409-432 Specials
Bottle Without Stopper 227498
Un-numbered
*For specials contact Wheaton Customer Service.
Robotic Stopper
Cat. No.
Description
227670 227672
Robotic Stopper, Glass Pennyhead Stopper, Glass
WHEATON
Qty/Case
12 12
For environmental testing apparatus see pages 65-82. For sampling devices see pages 129-132.
1.800.225.1437 (U.S. & Canada only) | +1.856.825.1100 | +1.856.825.1368 (F) | www.wheatonsci.com
"OTTLES ¬'LASS
4
"/$¬"OTTLE ¬"LACK ¬ ¬M, • For light sensitive samples • With glass Robotic stopper
"/$¬"OTTLE¬#AP¬ • Polyethylene cap prevents evaporation • Includes foam insert
This is a standard 300 mL BOD bottle with black PVC plastic coating that blocks all visible light up to 800 nm. This inhibits the production of oxygen by algae. We recommend this bottle for use in marine photosynthesis projects in which you need to compare oxygen in a light and a dark bottle. This bottle is supplied complete with a glass robotic stopper and an opaque black cap. To replace stopper use catalog number 227670. Cat. No.
Dia x H (mm)
227667
73 x 167
This polyethylene cap, complete with a closed cell foam insert, snaps firmly over the flared mouth of Wheaton BOD bottles. This closure prevents the evaporation of the water seal during the five-day BOD incubation period. The foam insert fits into the cap and exerts pressure on the bottle stopper to hold it securely in place. Cat. No.
Description
227723
BOD Bottle Cap
Qty/Case
50
Qty/Case
20
"/$¬"OTTLE ¬ ¬,ITERS¬ • With glass Robotic stopper • Large capacity
"/$¬"OTTLE¬2ACK¬ • Conveniently transports bottles safely • Racks are stackable
We recommend this 2 Liter BOD Bottle for long-term BOD and ultimate BOD analysis. This bottle is manufactured from Wheaton 33 low extractable borosilicate glass that conforms to USP Type I and also ASTM E-438 Type I, Class A requirements and comes complete with a glass robotic stopper. To replace stopper use catalog number 227670. Cat. No.
Dia x H (mm)
227580
These stackable, rugged wire racks are plastic-coated for corrosion resistance and quietness. They provide a convenient way to transport large amounts of bottles in the lab or in the field. The rack comes in three different sizes, which hold the 60 mL or 300 mL bottles.
Qty/Case
128 x 272
1
!CCESSORIES
Cat. No.
For Bottle Size
Holds
227728 227730 227735
60 mL 300 mL 300 mL
20 Bottles 12 Bottles 24 Bottles
L x W x H (in/cm)
Qty/Case
13 x 10 x 7 in (33.03 x 25.4 x 17.78 cm) 13 x 10 x 7 in (33.03 x 25.4 x 17.78 cm) 19 x 12 x 7 in (48.26 x 30.48 x 17.78 cm)
1 1 1
"/$¬"OTTLE¬!ERATOR • • • •
40-60 micron porosity glass frit Low extractable borosilicate glass For use with 300 mL bottle EPA Method 245.1 Manual Cold Vapor Technique
"/$¬3TOPPER¬,EASH This unit is useful in determining inorganic forms of mercury and organic mercurials in drinking, surface, and saline waters, as well as domestic and industrial waste. The Aerator has a 40-60 micron porosity cylindrical glass frit that provides even bubble distribution. It is manufactured from Wheaton 200 low extractable borosilicate glass that conforms to USP Type I and also ASTM E-438 Type I, Class A requirements. Reference: U.S. EPA Method 245.1, “Manual Cold Vapor Technique.” Cat. No.
Description
Qty/Case
227700
BOD Aerator
1
WHEATON
• Never lose a stopper again • Keeps stopper secure to the neck of bottle
This rubber leash ensures that the stoppers do not become lost when collecting samples in from the field. The 10 mm diameter holes at each end of the leash expand to fit securely around both the stoppers and the bottle necks. Cat. No.
Description
776580
Stopper Leash
1.800.225.1437 (U.S. & Canada only) | +1.856.825.1100 | +1.856.825.1368 (F) | www.wheatonsci.com
Qty/Case
25
"OTTLES ¬'LASS
5
$ROPPING¬"OTTLES
%XTRACTION¬"OTTLES
4#,0¬%XTRACTION¬"OTTLE $ROPPING¬"OTTLE ¬"ARNES • • • • •
Used to store and dispense liquids Perfect for educational use 30 mL capacity Average drop size is 46 μL Glass pipette holds approximately 480 μL
This clear, square shaped bottle is manufactured from Wheaton 400 borosilicate glass that conforms to USP Type I requirements. The lower portion of the isoprene rubber bulb forms a tightly fitting stopper. The bottle is supplied with the bulb and pipette. Replacement bulbs and pipettes are available separately. Cat. No.
Description
W211523 211523 211530 211533
30 mL capacity 30 mL capacity Replacement bulbs Replacement bulbs & pipettes
Dia x H (mm)
35 x 103 35 x 103 — —
Qty/Case
Use these bottles to determine if any of 40 contaminants are in waste material. Heavy-duty borosilicate bottles are used in EPA methods 1310 Extraction Procedure, 1311 Toxicity Characteristic Leaching Procedure (TCLP,) and 1312 Synthetic Precipitation Leaching Procedure (SPLP) for those substances subject to regulation under Subtitle C of the Resource Conservation and Recovery Act (RCRA). The EPA recommends that borosilicate bottles be used. All TCLP bottles have GPI 100-400 thread finish. Pre-cleaned TCLP bottles are available on special order. Contact Wheaton Science Products for more information. Cat. No.
Capacity (L)
Description
OD x Length (mm)
216711 216712 216731
2.2 2.2 3.2
Single-End Opening Double-End Opening Single-End Opening
110 x 325 110 x 334 110 x 450
Qty/Case
1 1 1
6 36 100 100
240202
240203
240204
4#,0¬%XTRACTION¬"OTTLE¬#AP • • • •
W211734, W211755
$ROPPING¬"OTTLE ¬!LL¬'LASS¬ • • • •
100-400 mm polypropylene screw cap For use with TCLP Extraction Bottles Available in 3 styles Purchase liners separately
Cat. No.
Description
240202 240203
White heavy duty PP screw cap; resilient to mechanical and chemical attack White heavy duty PP screw cap with center hole. Use with Zitex® Cap Liner (Cat. No. 240555) to self-vent the bottle. White light duty PP screw cap with a shorter skirt
240204
Delivers stains or indicator solutions drop by drop Available in clear or amber glass Ground glass stopper 50 and 100 mL capacity
Capacity (mL)
Dia x H (mm)
Qty/Case
50 100
45 x 95 56 x 120
6 6
50 100
45 x 95 56 x 120
6 6
Clear W211734 W211735
Amber W211754 W211755
WHEATON
4 4 4
#AP¬,INER
These bottles deliver stains and indicator solutions drop by drop from a projecting drip-tip on the side of the stopper. A partial turn of the ground glass stopper seals the bottle. Amber bottles are perfect for storing light-sensitive materials. Bottles are manufactured from soda-lime glass that conforms USP Type III requirements. Not autoclavable. Cat. No.
Qty/Case
• For TCLP Extraction Bottles • Zitex® liner provides unique venting properties • PTFE / Silicone liner provides excellent chemical resistance
The Zitex® liner consist of a laminate that combines Zitex®, a porous form of PTFE with unique venting properties, to a resilient foam backing. Zitex® also provides chemical resistance and a hydrophobic barrier that prevents pressure buildup in a container. The PTFE/Silicone liner consists of 0.005" PTFE bonded to 0.060" silicone and provides excellent chemical resistance. Cat. No.
Description
240555 240557
Zitex® Cap Liner PTFE/Silicone Cap Liner
For Cap Size (mm)
100 - 400 100 - 400
1.800.225.1437 (U.S. & Canada only) | +1.856.825.1100 | +1.856.825.1368 (F) | www.wheatonsci.com
Qty/Case
4 4
"OTTLES ÂŹ'LASS
'ENERAL0URPOSE'LASS"OTTLES • Bottles manufactured from soda-lime glass that conforms to USP Type III requirements • Available in clear glass or amber glass for light sensitive samples • Narrow mouth bottles are ideal for liquids • Wide mouth bottles are ideal for dry and viscous samples • Valumetric bottle are for measuring while you sample • White polypropylene or black phenolic screw caps • Screw caps are pre-attached to the containers or are available separately • Choice of cap liners: TeonŽ faced foamed polyethylene liner, Poly-Vinyl liner, Rubber liner, TeonŽ faced rubber, or Poly-SealŽ (cone) liner • Tamper Evident Seal/HAZCOM Label provided in each case of bottles with the exception of bulk packs
0ACKAGING • Packaged in convenience packs with caps attached • Convenience Bulk Packs provide larger quantities with or without caps attached for high use items or facilities with centralized stockrooms
Actual Label Size
4AMPERÂŹ%VIDENTÂŹ3EALÂŹ ÂŹ(!:#/-ÂŹ,ABELÂŹ • HAZCOM label allows for ID of content and safety notiďŹ cation • Labels provided in each case of bottles with the exception of bulk packs • Tamper Evident Seal keeps bottle sealed, protecting contents from accidental misuse
#APÂŹ,INERÂŹ3PECIlCATIONS Material
Description
Applications
Poly-Vinyl
One mil poly-vinyl ďŹ lm bonded to one mil HDPE on a #30 white pulp paper backing. Superior to plain pulp paper because it provides an excellent moisture barrier.
General purpose: Suitable for wide range of applications. Chemical resistance: Good for mild acids, alkalis, solvents, alcohols, oils and aqueous products. Poor for active hydrocarbons and bleaches.
TeonŽ Faced Foamed Polyethylene
Teon faced foamed polyethylene liner that offers the excellent chemical resistance of Teon with the compressibility and sealing properties of polyethylene foam.
Typical applications: analytical lab samples, high purity chemicals, strong acids, solvents. Excellent for environmental samples, pharmaceuticals and diagnostic reagents.
Poly-SealÂŽ
Manufactured from polyethylene (LDPE). The unique cone design provides a wedge type seal that not only seals across the top but also across the inside diameter.
Unique problem solving type of liner. This liner is stress crack resistant and offers superior torque retention and excellent sealing characteristics. It is recommended that this liner be tested prior to use for leak seal.
Styrene-Butadiene Rubber (14B)
The 14B white rubber lining material consists of homogeneous sulfur cured styrene-butadiene rubber. FDA Status complies with 21CFR 177.26, “Rubber articles intended for repeated use.�
Excellent properties of resilience, resistant to moisture vapor. Satisfactory for most moderate chemicals. Not good for oils, strong acids and hydrocarbons. Autoclavable.
TeonŽ Faced Rubber
The white rubber/0.005" PTFE liner consists of virign PTFE bonded to the white sulfur cured styrene-butadiene rubber. Complies with the FDA 21CFR 177.1550.
Designed for the ultimate in product safety. PTFE provides totally inert inner seal and surface facing the sample or product. Autoclavable.
WHEATON
1.800.225.1437 (U.S. & Canada only) | +1.856.825.1100 | +1.856.825.1368 (F) | www.wheatonsci.com
6
7
"OTTLES ¬'LASS
!#¬2OUND¬"OTTLE ¬#LEAR
"OSTON¬2OUND¬"OTTLE¬
• Clear USP Type III soda-lime glass • 30-500 mL (1 oz-16 oz) sizes
• 30-1000 mL (1 oz-32 oz) sizes • Polypropylene caps with choice of liners • Clear or Amber glass for light sensitive samples
AC Round Bottles have a taller and narrower profile than Straight Sided Jars. These bottles come packaged in convenience packs with caps attached or bulk packs without caps. Caps may also be purchased separately. Cat. No.
Capacity (oz)
Capacity (mL)*
Dia x H (mm)
Cap Size
Qty/Case
33-400 38-400 48-400 58-400 70-400
48 48 24 24 24
With White Polypropylene Cap/Poly-Vinyl Liner W216995 W216996 W216997 W216998 W216999
1 2 4 8 16
30 60 125 250 500
34 x 68 42 x 83 51 x 102 62 x 127 76 x 145
With White Polypropylene Cap/Teflon® Faced Foamed Polyethylene Liner W217000 W217001 W217002 W217003 W217004
1 2 4 8 16
30 60 125 250 500
34 x 68 42 x 83 51 x 102 62 x 127 76 x 145
33-400 38-400 48-400 58-400 70-400
48 48 24 24 24
1 2 4 8 16
30 60 125 250 500
34 x 68 42 x 83 51 x 102 62 x 127 76 x 145
33-400 38-400 48-400 58-400 70-400
432 288 144 96 48
*Approximate capacity.
Cap Size
Qty/Pack
Qty/Case
®
White Polypropylene/Teflon Faced Foamed Polyethylene Liner 239236 239237 239240 239242 239244
33-400 38-400 48-400 58-400 70-400
72 72 72 72 24
144 72 72 72 48
72 72 72 72 24
144 72 72 72 48
White Polypropylene/Poly-Vinyl Liner 239212 239213 239216 239218 239220
Cat. No.
Capacity (oz)
Capacity (mL)*
Dia x H (mm)
Cap Size
Qty/Case
20-400 20-400 22-400 24-400 28-400 33-400
48 24 24 12 12 12
With White Polypropylene Cap/Poly-Vinyl Liner W216800 W216801 W216802 W216803 W216804 W216805
1 2 4 8 16 32
30 60 125 250 500 1000
31 x 79 39 x 94 48 x 112 60 x 136 75 x 168 94 x 206
W216806 W216807 W216808 W216809 W216810 W216811
1 2 4 8 16 32
30 60 125 250 500 1000
31 x 79 39 x 94 48 x 112 60 x 136 75 x 168 94 x 206
20-400 20-400 22-400 24-400 28-400 33-400
48 24 24 12 12 12
31 x 79 39 x 94 48 x 112 60 x 136 75 x 168 94 x 206
20-400 20-400 22-400 24-400 28-400 33-400
48 24 24 12 12 12
31 x 79 39 x 94 48 x 112 60 x 136 75 x 168 94 x 206
20-400 20-400 22-400 24-400 28-400 33-400
48 24 24 12 12 12
With Black Phenolic Cap/Poly-Seal® Liner
2EPLACEMENT¬#APS¬FOR¬!#¬2OUND¬"OTTLES Cat. No.
"OSTON¬2OUND¬"OTTLE ¬#LEAR
With White Polypropylene Cap/Teflon® Faced Foamed Polyethylene Liner
Bottles Only Bulk W217005 W217006 W217007 W217008 W217009
Narrow Mouth Bottles are available in both clear and amber Type III soda-lime glass and conform to USP Type III requirements. These bottles are ideal for solvent, chemical and sample storage and are packaged in convenience packs with caps attached or bulk packs with or without caps. Caps may also be purchased separately.
33-400 38-400 48-400 58-400 70-400
W216812 W216813 W216814 W216815 W216816 W216817
1 2 4 8 16 32
With Black Phenolic Cap/Rubber Liner W216818 W216819 W216820 W216821 W216822 W216823
1 2 4 8 16 32
Labels provided in each case of bottles with the exception of bulk packs
30 60 125 250 500 1000
With White Polypropylene Cap/Poly-Vinyl Liner Bulk W216824 W216825 W216826 W216827 W216828 W216829
1 2 4 8 16 32
Bottles Only Bulk
Tamper Evident Seal / HAZCOM Label
30 60 125 250 500 1000
W216830 W216831 W216832 W216833 W216834 W216835
1 2 4 8 16 32
30 60 125 250 500 1000
31 x 79 39 x 94 48 x 112 60 x 136 75 x 168 94 x 206
20-400 20-400 22-400 24-400 28-400 33-400
432 288 160 108 60 12
30 60 125 250 500 1000
31 x 79 39 x 94 48 x 112 60 x 136 75 x 168 94 x 206
20-400 20-400 22-400 24-400 28-400 33-400
432 288 160 108 60 12
*Approximate capacity
WHEATON
1.800.225.1437 (U.S. & Canada only) | +1.856.825.1100 | +1.856.825.1368 (F) | www.wheatonsci.com
"OTTLES ¬'LASS "OSTON¬2OUND¬"OTTLE ¬!MBER¬ Cat. No.
Capacity (oz)
Capacity (mL)*
Dia x H (mm)
Cap Size
Qty/Case
20-400 20-400 22-400 24-400 28-400 33-400
48 24 24 12 12 12
With White Polypropylene Cap/Poly-Vinyl Liner W216836 W216837 W216838 W216839 W216840 W216841
1 2 4 8 16 32
30 60 125 250 500 1000
31 x 79 39 x 94 48 x 112 60 x 136 75 x 168 94 x 206
With White Polypropylene Cap/Teflon® Faced Foamed Polyethylene Liner W216842 W216843 W216844 W216845 W216846 W216847
1 2 4 8 16 32
30 60 125 250 500 1000
31 x 79 39 x 94 48 x 112 60 x 136 75 x 168 94 x 206
20-400 20-400 22-400 24-400 28-400 33-400
48 24 24 12 12 12
31 x 79 39 x 94 48 x 112 60 x 136 75 x 168 94 x 206
20-400 20-400 22-400 24-400 28-400 33-400
48 24 24 12 12 12
39 x 94 48 x 112 60 x 136 75 x 168 94 x 206
20-400 22-400 24-400 28-400 33-400
24 24 12 12 12
With Black Phenolic Cap/Poly-Seal® Liner W216848 W216849 W216850 W216851 W216852 W216853
1 2 4 8 16 32
30 60 125 250 500 1000
With Black Phenolic Cap/Rubber Liner W216854 W216855 W216856 W216857 W216858
2 4 8 16 32
60 125 250 500 1000
With White Polypropylene Cap/Poly-Vinyl Liner Bulk W216859 W216860 W216861 W216862 W216863 W216864
Bottles Only W216865 W216866 W216867 W216868 W216869 W216870
1 2 4 8 16 32
Bulk 1 2 4 8 16 32
30 60 125 250 500 1000
31 x 79 39 x 94 48 x 112 60 x 136 75 x 168 94 x 206
20-400 20-400 22-400 24-400 28-400 33-400
432 288 160 108 60 30
30 60 125 250 500 1000
31 x 79 39 x 94 48 x 112 60 x 136 75 x 168 94 x 206
20-400 20-400 22-400 24-400 28-400 33-400
432 288 160 108 60 30
*Approximate capacity
2EPLACEMENT¬#APS¬FOR¬"OSTON¬2OUND¬"OTTLES Cat. No.
Cap Size
Qty/Pack
Qty/Case
Black Phenolic with Rubber Liner W239298 W239299 W239300 W239301 W239302
20-400 22-400 24-400 28-400 33-400
72 72 72 72 72
144 144 144 144 144
72 72 72 72 72
144 144 144 144 144
Black Phenolic/PE Poly-Seal® Liner 239253 239255 239257 239259 239260
20-400 22-400 24-400 28-400 33-400
White Polypropylene/Teflon® Faced Foamed Polyethylene Liner 239229 239231 239233 239235 239236
20-400 22-400 24-400 28-400 33-400
72 72 72 72 72
144 144 144 144 144
72 72 72 72 72
144 144 144 144 144
20-400 22-400 24-400 28-400 33-400
WHEATON
• • • •
15-500 mL (0.5 oz-16 oz) sizes Square shape maximizes storage space Clear for sample observation 4 different cap liners
French Square Bottles are made with USP Type III soda-lime glass and conform to USP Type III requirements. The square design allows for full utilization of any storage area, maximizing space efficiency. Bottles are packaged in convenience packs with caps attached or bulk packs with or without caps. Caps may also be purchased separately. Cat. No.
Capacity (oz)
Capacity (mL)*
Dia x H (mm)
Cap Size
Qty/Case
20-400 24-400 28-400 33-400 43-400 48-400
48 48 48 24 24 24
With White Polypropylene Cap/Poly-Vinyl Liner W216871 W216872 W216873 W216874 W216875 W216876
.5 1 2 4 8 16
15 30 60 125 250 500
26 x 62 31 x 72 39 x 87 45 x 111 56 x 137 68 x 167
With White Polypropylene Cap/Teflon® Faced Foamed Polyethylene Liner W216877 W216878 W216879 W216880 W216881 W216882
.5 1 2 4 8 16
15 30 60 125 250 500
26 x 62 31 x 72 39 x 87 45 x 111 56 x 137 68 x 167
20-400 24-400 28-400 33-400 43-400 48-400
48 48 48 24 24 24
26 x 62 31 x 72 39 x 87 45 x 111 56 x 137 68 x 167
20-400 24-400 28-400 33-400 43-400 48-400
48 48 48 24 24 24
26 x 62 31 x 72 39 x 87 45 x 111
20-400 24-400 28-400 33-400
48 48 48 24
With Black Phenolic Cap/Rubber Liner W216883 W216884 W216885 W216886 W216887 W216888
.5 1 2 4 8 16
15 30 60 125 250 500
With Black Phenolic Cap/Poly-Seal® Liner W216889 W216890 W216891 W216892
.5 1 2 4
15 30 60 125
With White Polypropylene Cap/Poly-Vinyl Liner Bulk W216893 W216894 W216895 W216896 W216897
1 2 4 8 16
30 60 125 250 500
31 x 72 39 x 87 45 x 111 56 x 137 68 x 167
24-400 28-400 33-400 43-400 48-400
280 240 120 84 40
30 60 125 250 500
31 x 72 39 x 87 45 x 111 56 x 137 68 x 167
24-400 28-400 33-400 43-400 48-400
280 240 120 84 40
Bottles Only Bulk W216898 W216899 W216900 W216901 W216902
1 2 4 8 16
*Approximate capacity
White Polypropylene/Poly-Vinyl Liner 239205 239207 239209 239211 239212
&RENCH¬3QUARE¬"OTTLE ¬#LEAR
1.800.225.1437 (U.S. & Canada only) | +1.856.825.1100 | +1.856.825.1368 (F) | www.wheatonsci.com
8
"OTTLES ¬'LASS
9
Standard Wide Mouth Bottle, continued...
2EPLACEMENT¬#APS¬FOR¬&RENCH¬3QUARE¬"OTTLES Cat. No.
Cap Size
Qty/Pack
Qty/Case
Capacity (oz)
Capacity (mL)*
Dia x H (mm)
Cap Size
Qty/Case
125 250 500 2000 4000
52 x 84 63 x 110 79 x 133 122 x 213 157 x 256
48-400 58-400 63-400 83-400 89-400
24 24 24 6 4
Bottles Only
Black Phenolic with Rubber Liner W239298 W239300 W239301 W239302 W239304 W239306
Cat. No.
20-400 24-400 28-400 33-400 43-400 48-400
72 72 72 72 72 72
144 144 144 144 72 72
72 72 72 72
144 144 144 144
W216934 W216935 W216936 W216937 W216938
4 8 16 65 130
*Approximate capacity
®
Black Phenolic/PE Poly-Seal Liner 239253 239257 239259 239260
20-400 24-400 28-400 33-400
White Polypropylene/Teflon® Faced Foamed Polyethylene Liner 239229 239233 239235 239236 239238 239240
20-400 24-400 28-400 33-400 43-400 48-400
72 72 72 72 72 72
144 144 144 144 72 72
72 72 72 72 72 72
144 144 144 144 72 72
White Polypropylene with Poly-Vinyl Liner 239205 239209 239211 239212 239214 239216
20-400 24-400 28-400 33-400 43-400 48-400
2EPLACEMENT¬#APS¬FOR¬3TANDARD¬7IDE¬-OUTH¬"OTTLES Cat. No.
Cap Size
Qty/Pack
Qty/Case
White Polypropylene/Teflon® Faced Foamed Polyethylene Liner 239240 239242 239243 239245 239246
48-400 58-400 63-400 83-400 89-400
72 72 24 24 24
72 72 48 48 48
72 72 24 24 24
72 72 48 48 48
White Polypropylene/Poly-Vinyl Liner 239216 239218 239219 239221 239222
48-400 58-400 63-400 83-400 89-400
3TRAIGHT¬3IDED¬*AR ¬#LEAR • • • • •
3TANDARD¬7IDE¬-OUTH¬"OTTLE ¬#LEAR • • • •
Clear, Type III soda-lime glass 125-4000 mL (4 oz-130 oz) sizes Largest bottles available Ready-to-use storage container
Standard Wide Mouth Bottles are ideal for general small to large volume storage. Caps available with the choice of two different liners. Bottles are packaged in convenience packs with or without caps attached. Caps may also be purchased separately. Cat. No.
Capacity (oz)
Capacity (mL)*
Dia x H (mm)
Cap Size
Qty/Case
48-400 58-400 63-400 83-400 89-400
24 24 24 6 4
With White Polypropylene Cap/Poly-Vinyl Liner W216924 W216925 W216926 W216927 W216928
4 8 16 65 130
125 250 500 2000 4000
52 x 84 63 x 110 79 x 133 122 x 213 157 x 256
With White Polypropylene Cap/Teflon® Faced Foamed Polyethylene Liner W216929 W216930 W216931 W216932 W216933
4 8 16 65 130
125 250 500 2000 4000
WHEATON
52 x 84 63 x 110 79 x 133 122 x 213 157 x 256
48-400 58-400 63-400 83-400 89-400
24 24 24 6 4
Clear USP Type III soda-lime glass 60-1000 mL (2 oz-32 oz) sizes Wide mouth design is great for large solid samples Walls allow for complete removal of contents Ideal for soil sampling and environmental applications
Straight Sided Jars are packaged in convenience packs with caps attached or bulk packs with or without caps. Caps may also be purchased separately. Cat. No.
Capacity (oz)
Capacity (mL)*
Dia x H (mm)
Cap Size
Qty/Case
53-400 58-400 70-400 89-400 89-400
24 24 12 12 12
With White Polypropylene Cap/Poly-Vinyl Liner W216903 W216904 W216905 W216906 W216907
2 4 8 16 32
60 125 250 500 1000
55 x 48 60 x 68 73 x 88 91 x 95 95 x 170
With White Polypropylene Cap/Teflon® Faced Foamed Polyethylene Liner W216908 W216909 W216910 W216911 W216912
2 4 8 16 32
60 125 250 500 1000
55 x 48 60 x 68 73 x 88 91 x 95 95 x 170
53-400 58-400 70-400 89-400 89-400
24 24 12 12 12
60 x 68
58-400
24
With Black Phenolic Cap/Rubber Liner W216913
4
125
1.800.225.1437 (U.S. & Canada only) | +1.856.825.1100 | +1.856.825.1368 (F) | www.wheatonsci.com
"OTTLES ÂŹ'LASS Straight Sided Jar, continued... Cat. No.
Capacity (oz)
Valumetric Bottle, continued...
Capacity (mL)*
Dia x H (mm)
Cap Size
Qty/Case
With White Polypropylene Cap/Poly-Vinyl Liner Bulk W216914 W216915 W216916 W216917 W216918
2 4 8 16 32 2 4 8 16 32
Capacity (oz)
55 x 48 60 x 68 73 x 88 91 x 95 95 x 170
53-400 58-400 70-400 89-400 89-400
144 24 24 12 12
60 125 250 500 1000
55 x 48 60 x 68 73 x 88 91 x 95 95 x 170
53-400 58-400 70-400 89-400 89-400
144 24 24 12 12
W216978 W216979 W216980 W216981
1 2 4 8
W216982 W216983 W216984 W216985 W216986
2EPLACEMENTÂŹ#APSÂŹFORÂŹ3TRAIGHTÂŹ3IDEDÂŹ*ARS
Bottles Only
Bulk
W216989 W216990 W216991 W216992 W216993
1 2 4 8 16
Qty/Case
White Polypropylene/TeonŽ Faced Foamed Polyethylene Liner 239241 239242 239244 239246
53-400 58-400 70-400 89-400
72 72 24 24
72 72 48 48
72 72 24 24
72 72 48 48
White Polypropylene/Poly-Vinyl Liner 239217 239218 239220 239222
53-400 58-400 70-400 89-400
Cap Size
Qty/Case
34 x 68 42 x 83 51 x 102 62 x 127
33-400 38-400 48-400 58-400
48 48 24 24
30 60 125 250 500
33-400 38-400 48-400 58-400 70-400
432 288 144 96 48
34 x 68 42 x 83 51 x 102 62 x 127 76 x 145
With Black Phenolic Cap/Poly-SealÂŽ Liner Bulk 1 2
Qty/Pack
30 60 125 250
1 2 4 8 16
W216987 W216988
Cap Size
Dia x H (mm)
With White Polypropylene Cap/Poly-Vinyl Liner Bulk
*Approximate capacity
Cat. No.
Capacity (mL)*
With Black Phenolic Cap/Rubber Liner
60 125 250 500 1000
Bottles Only Bulk W216919 W216920 W216921 W216922 W216923
Cat. No.
30 60
34 x 68 42 x 83
33-400 38-400
432 288
30 60 125 250 500
34 x 68 42 x 83 51 x 102 62 x 127 76 x 145
33-400 38-400 48-400 58-400 70-400
432 288 144 96 48
*Approximate capacity
2EPLACEMENT#APSFOR6ALUMETRICš"OTTLES Cat. No.
Cap Size
Qty/Pack
Qty/Case
Black Phenolic/PE Poly-SealÂŽ Liner 239260
33-400
72
144
White Polypropylene/TeonŽ Faced Foamed Polyethylene Liner 239236 239237 239240 239242 239244
33-400 38-400 48-400 58-400 70-400
72 72 72 72 24
144 72 72 72 48
72 72 72 72 24
144 72 72 72 48
White Polypropylene/Poly-Vinyl Liner 239212 239213 239216 239218 239220
/ILÂŹ3AMPLEÂŹ"OTTLE ÂŹ#LEAR
6ALUMETRICš'RADUATED"OTTLE #LEAR • • • •
33-400 38-400 48-400 58-400 70-400
• Clear, Type III soda-lime glass • Bottles come with cork inserted
Clear USP Type III soda-lime glass 30-500 mL (1 oz-16 oz) sizes Easy removal of contents Graduated in mL and oz
Cat. No.
Capacity (oz)
Capacity (mL)*
Dia x H (mm)
4
125
37 x 163
W216994
Qty/Case
144
*Approximate capacity
Graduated bottles are ideal for general storage. With the choice of two different liners, these bottles are excellent for storage of liquid or dry materials. They come packaged in convenience packs with caps attached or bulk packs with or without caps. Caps may also be purchased separately. Cat. No.
Capacity (oz)
Capacity (mL)*
Dia x H (mm)
Cap Size
Qty/Case
33-400 38-400 48-400 58-400 70-400
48 48 24 24 24
With White Polypropylene Cap/Poly-Vinyl Liner W216966 W216967 W216968 W216969 W216970
1 2 4 8 16
30 60 125 250 500
34 x 68 42 x 83 51 x 102 62 x 127 76 x 145
ty e SafeB ottl
&ORÂŹ3AFETYÂŹ#OATEDÂŹ "OTTLESÂŹSEEÂŹPAGESÂŹ
With White Polypropylene Cap/TeonŽ Faced Foamed Polyethylene Liner W216971 W216972 W216973 W216974 W216975
1 2 4 8 16
30 60 125 250 500
34 x 68 42 x 83 51 x 102 62 x 127 76 x 145
33-400 38-400 48-400 58-400 70-400
48 48 24 24 24
33-400 38-400
48 48
With Black Phenolic Cap/Poly-SealÂŽ Liner W216976 W216977
1 2
30 60
WHEATON
34 x 68 42 x 83
1.800.225.1437 (U.S. & Canada only) | +1.856.825.1100 | +1.856.825.1368 (F) | www.wheatonsci.com
10
"OTTLES ¬'LASS
11
Wide Mouth Packer, continued... Cat. No.
Capacity (oz)
Capacity (mL)*
Dia x H (mm)
Cap Size
Qty/Case
28-400 33-400 38-400
24 24 24
With Black Phenolic Cap/Poly-Seal Liner W216951 W216952 W216953
1 2 4
30 60 125
37 x 65 44 x 75 54 x 95
With White Polypropylene Cap/Poly-Vinyl Liner Bulk W216954 W216955 W216956 W216957 W216958 W216959
Bottles Only
7IDE¬-OUTH¬0ACKER ¬!MBER • • • • •
W216960 W216961 W216962 W216963 W216964 W216965
30-1000 mL (1 oz-32 oz) sizes Ideal for storage of dry powders Easy removal of contents For light-sensitive samples Amber, USP Type III soda-lime glass
Amber Wide Mouth Packers can be used to store light-sensitive samples. The wide mouth design allows for easier handling of dry or solid samples. These bottles are packaged in convenience packs with caps attached or bulk packs with or without caps. Caps may also be purchased separately. Cat. No.
Capacity (oz)
Capacity (mL)*
Dia x H (mm)
Cap Size
Qty/Case
28-400 33-400 38-400 45-400 53-400 53-400
24 24 24 24 12 12
With White Polypropylene Cap/Poly-Vinyl Liner W216939 W216940 W216941 W216942 W216943 W216944
1 2 4 8 16 32
30 60 125 250 500 1000
37 x 65 44 x 75 54 x 95 66 x 119 80 x 146 99 x 178
With White Polypropylene Cap/Teflon® Faced Foamed Polyethylene Liner W216945 W216946 W216947 W216948 W216949 W216950
1 2 4 8 16 32
30 60 125 250 500 1000
37 x 65 44 x 75 54 x 95 66 x 119 80 x 146 99 x 178
28-400 33-400 38-400 45-400 53-400 53-400
(YBRIDIZATION¬"OTTLES
24 24 24 24 12 12
1 2 4 8 16 32
30 60 125 250 500 1000
37 x 65 44 x 75 54 x 95 66 x 119 80 x 146 99 x 178
28-400 33-400 38-400 45-400 53-400 53-400
432 216 180 84 60 36
30 60 125 250 500 1000
37 x 65 44 x 75 54 x 95 66 x 119 80 x 146 99 x 178
28-400 33-400 38-400 45-400 53-400 53-400
432 216 180 84 60 36
Bulk 1 2 4 8 16 32
*Approximate capacity
2EPLACEMENT¬#APS¬FOR¬7IDE¬-OUTH¬0ACKERS Cat. No.
Cap Size
Qty/Pack
Qty/Case
®
Black Phenolic/PE Poly-Seal Liner 239259 239260
28-400 33-400
72 72
144 144
White Polypropylene/Teflon® Faced Foamed Polyethylene Liner 239235 239236 239237 239239 239241
28-400 33-400 38-400 45-400 53-400
72 72 72 72 72
144 144 72 72 72
72 72 72 72 72
144 144 72 72 72
White Polypropylene/Poly-Vinyl Liner 239211 239212 239213 239215 239217
28-400 33-400 38-400 45-400 53-400
Use Wheaton Hybridization Bottles in nucleic acid and protein blotting procedures that require a minimum of probe solution. Wheaton hybridization bottles eliminate the need for messy bags and allow hybridization and wash solutions to be quickly poured in and out. They fit many hybridization ovens such as Barnstead, Hybaid and Bellco. We offer a variety of bottle sizes to ensure proper membrane fit. Our hybridization bottles are manufactured from Wheaton 200 borosilicate glass that conforms to USP Type I requirements and feature heavy 3.2 mm sidewalls for added safety. In addition, safety coated bottles are available with a strong, slip-resistant plastisol coating to reduce potential breakage and exposure to hazardous materials. The 35 mm ID bottle caps are Polybutylene Terephthalate (PBT) with Teflon®/silicone liners. The 70 mm ID bottle caps are Polypropylene with Teflon®/silicone liners. An acrylic rack is also available for safe transporting or laboratory storage. The rack holds up to 6 bottles of size ID 35 mm. Cat. No.
Size ID x L (mm)
Cap Size (mm)
Qty/Case
Hybridization Bottles 805000 805001 805003 805007 805011
35 x 75 35 x 100 35 x 150 35 x 300 70 x 300
45 45 45 45 70-400
1 1 1 1 1
45 45 45 45 70-400 —
1 1 1 1 1 1
Safety Coated Hybridization Bottles
• Bottles fit most standard hybridization ovens • Five bottle sizes accommodate a variety of membrane sizes • Acrylic storage rack available separately
WHEATON
805020 805021 805023 805027 805031 805015
35 x 75 35 x 100 35 x 150 35 x 300 70 x 300 Acrylic Storage Rack
1.800.225.1437 (U.S. & Canada only) | +1.856.825.1100 | +1.856.825.1368 (F) | www.wheatonsci.com
"OTTLES ¬'LASS -EDIA¬"OTTLES • • • • • •
125 – 1000 mL size with narrow mouth Special pour lip facilitates pouring Hand grips on 1 Liter bottle provides easy handling Available with or without graduations Black phenolic screw caps with choice of three liners Packaged in partitioned carton
Wheaton Media bottles are manufactured from Wheaton 400 borosilicate glass that conforms to USP Type I requirements and has a low alkali content to help prevent changes in pH to maintain the purity of its contents. The pour lip and sloped shoulders facilitate pouring and cleaning and the hand grips on the 1 Liter bottle makes for easy handling. Bottles come with or without graduations and have a large writing patch. Bottles are available with or without caps. Pre-attached black phenolic screw caps include the following liners: • 14B white rubber liner widely used for mixing and storing culture media. Autoclavable. • Polyethylene (LDPE) liner used for distilled water, analytical standards and reagents. • Teflon® faced rubber liner inert to most chemicals. Autoclavable.
d HanG rips
-EDIA¬,AB¬"OTTLES ¬'RADUATED
Media Lab Bottles, Graduated, continued...
• • • •
Cat. No.
Clear borosilicate glass bottle with graduations and marking patch Amber borosilicate glass bottle in 125 mL size only Pre-attached black phenolic screw caps with choice of three liners Hand grips on 1 L bottle provide easy handling
#LEAR¬'LASS¬"OTTLE¬¬ Cat. No.
Capacity (mL)
Cap Off Dia x H (mm)
125 250 500 1000
55 x 123 67 x 152 88 x 192 103 x 235
55 x 119 67 x 148 88 x 188 103 x 231
Cap Size
219815 219817 219819 219820 Qty/Case
125 250 500 1000
33-430 33-430 33-430 38-430
48 48 24 24
33-430 33-430 33-430 38-430
48 48 24 24
With Polyethylene (LDPE) Lined Phenolic Cap 219715 219717 219719 219720
125 250 500 1000
55 x 123 67 x 152 88 x 192 103 x 235
55 x 119 67 x 148 88 x 188 103 x 231
125 250 500 1000
55 x 123 67 x 152 88 x 192 103 x 235
WHEATON
55 x 119 67 x 148 88 x 188 103 x 231
Cat. No.
Qty/Case
55 x 119 67 x 148 88 x 188 103 x 231
Capacity (mL)
Cap On Dia x H (mm)
Cap Off Dia x H (mm)
125
55 x 123
55 x 119
48 48 24 24
33-430 33-430 33-430 38-430
48 48 24 24
Cap Size
Qty/Case
Without Cap 219845
33-430
48
33-430
48
33-430
48
With Polyethylene (LDPE) Lined Phenolic Cap 125
55 x 123
55 x 119
With (Autoclavable) Rubber Lined Phenolic Cap 219865
125
55 x 123
55 x 119
With (Autoclavable) Teflon® Faced Rubber Lined Phenolic Cap 219875
33-430 33-430 33-430 38-430
Cap Size
!MBER¬'LASS¬"OTTLE¬
219855
With (Autoclavable) Rubber Lined Phenolic Cap 219755 219757 219759 219760
Cap Off Dia x H (mm)
55 x 123 67 x 152 88 x 192 103 x 235
Without Cap 219435 219437 219439 219440
Cap On Dia x H (mm)
With (Autoclavable) Teflon® Faced Rubber Lined Phenolic Cap
¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬ Cap On Dia x H (mm)
Capacity (mL)
125
55 x 123
55 x 119
33-430
48
See replacement caps on page 13.
Media bottles are ideal for holding your bottle top dispenser. For a complete selection of Bottle Top Dispensers see pages 99-100.
1.800.225.1437 (U.S. & Canada only) | +1.856.825.1100 | +1.856.825.1368 (F) | www.wheatonsci.com
12
"OTTLES ¬'LASS
13
-EDIA¬"OTTLE ¬,AB¬ ©¬'RADUATED¬"OTTLES¬ • • • • • •
-EDIA¬,AB¬"OTTLES ¬.ON 'RADUATED • • • •
Clear borosilicate glass bottle without graduations Amber borosilicate glass bottle in 125 mL size only Pre-attached black phenolic screw caps with choice of liner Hand grips on 1 Liter bottle provide easy handling
Cat. No.
Capacity (mL)
Cap On Dia x H (mm)
Cap Off Dia x H (mm)
Cap Size
Qty/Case
Clear Glass Bottle Without Cap 219415 219417 219419 219420
125 250 500 1000
55 x 123 67 x 152 88 x 192 103 x 235
55 x 119 67 x 148 88 x 188 103 x 231
33-430 33-430 33-430 38-430
48 48 24 24
Clear Glass Bottle With Polyethylene (LDPE) Lined Phenolic Cap 219495 219497 219499 219500
125 250 500 1000
55 x 123 67 x 152 88 x 192 103 x 235
55 x 119 67 x 148 88 x 188 103 x 231
33-430 33-430 33-430 38-430
48 48 24 24
Clear Glass Bottle With (Autoclavable) Rubber Lined Phenolic Cap 219575 219577 219579 219580
125 250 500 1000
55 x 123 67 x 152 88 x 192 103 x 235
55 x 119 67 x 148 88 x 188 103 x 231
33-430 33-430 33-430 38-430
48 48 24 24
55 x 119
33-430
48
Amber Glass Bottle without Cap 219885
125
55 x 123
Borosilicate glass helps prevent pH changes Available in 100 mL - 2 L size with wide mouth Graduated with writing patch Special pour lip facilitates pouring Provided with or without screw caps Color coded caps can be purchased separately
Wheaton Lab 45 Media Bottles are manufactured from USP Type I borosilicate glass. These versatile bottles have a 45 mm screw thread finish, a large writing area and approximate volume graduations. The wide 45 mm finish facilitates filling and retrieval of contents. Sloping shoulders allow for easy cleaning and complete drainage while the polypropylene pour ring eliminates dripping. The Lab 45 is available with a white polypropylene cap and pour ring pre-attached. Caps and pour rings may be purchased separately. The cap has a built-in wedge shaped sealing ring, eliminating the need for a liner. Lab 45 is also ideal for freeze-drying when used with 224100-503 or 224100-507 slotted stoppers and a 240736 screw cap. The bottles, caps, and pour rings are autoclavable. Cat. No.
Capacity (mL)
Dia x H (mm)
Cap Size (mm)
Qty/Case
Bottles with Caps and Pour Rings Attached 219925 219927 219929 219930 219931
100 250 500 1000 2000
56 x 109 70 x 144 86 x 186 101 x 233 137 x 267
45 45 45 45 45
12 12 12 12 6
45 45 45 45 45
12 12 12 12 6
Bottles without Caps or Pour Rings 219915 219917 219919 219920 219921
100 250 500 1000 2000
56 x 103 70 x 138 86 x 180 101 X 227 137 X 261
!CCESSORIES ¬,AB¬ ©¬-EDIA¬"OTTLES¬
Solid Top Cap with Liner
• • • •
Open Top Cap with Septa
2EPLACEMENT¬#APS¬FOR¬-EDIA¬"OTTLES • For Wheaton media bottles • Black phenolic caps with 33 and 38 mm screw threads Cat. No.
Cap Size
Qty/Case
33-430 38-430
200 200
33-430 38-430
200 200
With Polyethylene (LDPE) Liner 240080 240081
With Rubber Liner (Autoclavable) 240280 240281
With Teflon® Faced Rubber Liner (Autoclavable) 240480 240481
33-430 38-430
100 100
Open Top Cap With Gray Chlorobutyl/50 Septa and Flange (Autoclavable) 240680 240683
33-430 33-430
100 1000
For Sterile PET Square Media Bottles and Individually Wrapped Media Bottles see pages 26 and 30. WHEATON
45 mm screw cap with or without sealing ring High temperature screw caps Caps and stoppers for lyophilization Pour rings
The 45 mm polypropylene screw cap with sealing ring are replacements for caps that are provided with Lab 45 media bottles. For high temperature applications use the PBT (polybutylene terephthalate) screw caps and the ETFE (ethylene tetrafluoroethylene) pour lips which can withstand temperatures up to 180ºC. For lyophilization applications use the solid or open top polypropylene screw cap without the sealing ring and use the black lyophilization stopper. Cat. No.
Description
240726 240726-03 240726-04 240736 240740 240746 240750 240756 240760 224100-503 224100-507
White PP cap with sealing ring Red PP cap with sealing ring Blue PP cap with sealing ring White PP cap without sealing ring White PP cap with Teflon® faced silicone liner White PP cap with open top Red PBT cap with Teflon® Faced Silicone Liner Natural Polypropylene Pour Rings Red ETFE Pour Rings Halobutyl/60 Black Lyophilization Stoppers EPDM Black Lyophilization Stoppers
Size (mm)
45 45 45 45 45 45 45 45 45 43 43
For Safety Coated Media Bottles see page 17.
1.800.225.1437 (U.S. & Canada only) | +1.856.825.1100 | +1.856.825.1368 (F) | www.wheatonsci.com
Qty/Case
12 12 12 12 12 12 10 12 10 12 12
"OTTLES ¬'LASS
14
2EAGENT¬"OTTLES Wheaton borosilicate glass reagent bottles with ground glass stoppers are ideal when needing an all glass bottle. Bottles are available in clear or amber glass with a narrow or wide mouth. Bottles are autoclavable.
ss a l G l Al ttle Bo
2EAGENT¬"OTTLE ¬7IDE¬-OUTH¬ • • • • •
Borosilicate glass bottle and stopper Features no-drip pour lip Ground glass stopper fits securely Wide mouth ideal for solids and viscous liquids Autoclavable
Wide mouth reagent bottles with ground glass stoppers feature a no-drip pour lip for easy pouring of contents. The bottles are ideal for solids and viscous liquids. These bottles feature a unique design that makes them easy to clean with a lab brush or in a glassware washer. The ground stoppers are octagon-shaped and interchangeable. The bottle’s specially designed rim will not allow fluids to run down the outside of the bottle. The bottles are made from borosilicate glass. Cat. No.
W216014 W216015 216017 216019 216020 216021
Capacity (mL)
Dia x H (mm)
Stopper Size
50 100 250 500 1000 2000
43 x 90 54 x 110 72 x 140 89 x 175 109 x 215 135 x 260
24/20 29/22 34/35 45/40 60/46 60/46
Qty/Case
6 6 10 10 10 6
2EAGENT¬"OTTLE ¬.ARROW¬-OUTH
2EAGENT¬"OTTLE ¬3CREW¬#AP¬
• • • • •
• Borosilicate glass bottle • Features no-drip pour lip • Pre-attached polypropylene screw cap with Teflon® liner • Large writing patch • Autoclavable
Borosilicate glass bottle and stopper Features no-drip pour lip Ground glass stopper fits securely Narrow mouth ideal for liquids Autoclavable
Narrow mouth reagent bottles with ground glass stoppers feature a no-drip pour lip for easy pouring of contents. An octagon-shaped ground-glass stopper, which protects contents from airborne contaminants, is included. These bottles are manufactured from borosilicate glass and are available in clear or amber glass. Use amber bottles to protect light-sensitive samples during storage. Cat. No.
Capacity (mL)
Dia x H (mm)
Stopper Size
53 x 115 72 x 145 88 x 175 110 x 215 135 x 265 175 x 320
14/23 19/26 24/29 29/32 29/32 45/40
Qty/Case
Clear Glass Bottles W215235 215237 215239 215240 215241 215243
100 250 500 1000 2000 5000
6 10 10 10 6 1
Amber Glass Bottles W215255 215257 215259
100 250 500
53 x 115 72 x 145 88 x 175
WHEATON
14/23 19/26 24/29
6 10 10
These bottles feature a no-drip pour lip and a large screened writing patch for content identification, eliminating the need for manual label application. The pre-attached polypropylene caps have a solid Teflon® liner. The bottles’ sloping shoulders allow for easy filling, cleaning, and safer pouring without liquid surge. The product is manufactured from Wheaton 400 borosilicate glass that conforms to USP Type I requirements to help prevent changes in pH levels and maintain content purity. Cat. No.
Size (mL)
Dia x H (mm)
Cap Size
Qty/Case
220163 220223 220283
125 250 500
55 x 120 67 x 150 88 x 190
33-430 33-430 33-430
6 6 6
1.800.225.1437 (U.S. & Canada only) | +1.856.825.1100 | +1.856.825.1368 (F) | www.wheatonsci.com
15
"OTTLES ¬'LASS 2ESERVOIR ¬(IGH¬#APACITY • Ideal as mobile phase or filtration reservoir • Safety coated glass bottles provide an added measure of safety • UV protectant coating • Manufactured from 33 low extractable borosilicate glass • Screw cap size 45 mm
Safetyoated C
These reservoirs can be used for a variety of applications including mobile phase and filtration reservoirs and for general sample and buffer storage. The reservoirs have a plastic safety coating with a UV blocking agent on the outside. This coating helps retain the liquid contents and glass fragments in case of breakage and blocks virtually all UV light up to 385 nm. The safety coating is also autoclavable up to 121°C at 15-20 psig for 15-20 minutes. The reservoir is manufactured from Wheaton 33 low extractable borosilicate glass that conforms to ASTM Type I, Class A and USP Type I requirements. Cat. No.
Size (mL)
Cap Size (mm)
Dia x H (mm)
264710 264711
2000 5000
45 45
138 x 246 186 x 318
Qty/Case
1 1
3CREW¬#AP¬ ¬3TOPPER¬ • • • •
45 mm white polypropylene screw cap 43 mm Halobutyl/60 stopper Fits high capacity reservoirs 264710, 264711 Teflon faced silicon liner is ultrasonically bonded to eliminate toxicity
Cat. No.
Description
240736 224100-503* 240740
45 mm Screw Cap without Sealing Ring 43 mm Halobutyl/60 stopper 45 mm Screw Cap with Teflon Faced Silicone Liner
Qty/Case
12 12 12
*43 mm stopper can only be used with 240736 cap
2OLLER¬"OTTLES • Reusable • Strong borosilicate glass to withstand repeated wet or dry sterilization • 38, 45 or 51 mm screw thread • Autoclavable
These culture vessels are made to exacting tolerances in order to provide higher cell yields. The glass is specially selected for optical clarity, interior surface smoothness, and the absence of glass imperfections. The neck area is tapered for easy cleaning and removal of cells. Glass wall thickness is 2.6 mm. The wider opening vessels provide easier access to the inside for removing cells or cleaning. These vessels are made of Wheaton 33 low extractable borosilicate glass that conforms to USP Type I and also ASTM E-438 Type I, Class A requirements. Cat. No.
ller o R s Glas
Bottle
Dia x Flat Overall Usable Length (mm) Surface Area (cm2)
Surface (cm2)
Approx Capacity (mL)
Qty/Case
Roller bottle with 38 mm deep skirted, black phenolic screw cap with white styrene-butadiene rubber liner (G.P.I. 38-415) 348252 348253 348256 348258
110 x 240 110 x 285 110 x 480 110 x 550
550 700 1320 1555
680 840 1500 1680
1380 1760 3450 4230
4 4 4 4
Roller bottle with 45 mm white polypropylene screw cap with inner sealing ring, and polypropylene pour ring. This bottle can also be used with the Vented Cap (Cat. No. W240751) 348272 348273
110 x 240 110 x 285
550 700
680 840
1380 1760
4 4
Roller bottle with 51 mm black phenolic screw cap with shallow skirt and white styrene-butadiene rubber liner (G.P.I. 51-400) 348522 348524 348528
110 x 270 110 x 355 110 x 535
700 940 1555
840 1070 1680
1760 2500 4230
4 4 4
6ENTED¬#AP ¬ ¬MM • Sterile cap with 0.2 μm Gore-Tex® filter • Fits 348272 and 348273 bottles
For a complete listing of Wheaton Roller Culture Apparatus see pages 58-63.
WHEATON
Cat. No.
Description
Cap Size (mm)
W240751 W240752
Vented Cap Vented Cap
45 45
1.800.225.1437 (U.S. & Canada only) | +1.856.825.1100 | +1.856.825.1368 (F) | www.wheatonsci.com
Qty/Case
4 12
"OTTLES ¬'LASS 3AFETY¬#OATED¬"OTTLES • • • • •
Promotes safety by retaining contents if bottle is accidentally broken PVC-based plastisol coats exterior of bottle Sizes from 4 oz to 5 gallon Clear or amber glass Available with or without caps
Create a safe work environment with Wheaton’s safety coated bottles. If a bottle is accidentally broken, the PVC based plastisol coating on the bottle retains the contents long enough for proper disposal. Ideal for lab or field applications, the bottle’s non-slip coating allows for greater ease and stability when handling wet or dry. Most bottles are manufactured from soda-lime glass that conforms to USP Type III requirements. The media and reagent bottles are manufactured from Type I borosilicate glass which conforms to USP Type I requirements.
3AFETY¬#OATED¬"OTTLE ¬!MBER¬'LASS 3AFETY¬#OATED¬"OTTLE ¬#LEAR¬'LASS¬ • • • • •
Plastisol coating for safety Made from clear soda-lime glass that conforms to USP Type III requirements Available with or without caps 8, 16 & 32 oz Boston Round style 80 oz with jug handle
Cat. No.
Approx Size (oz)
Dia x H cap on (mm)
Dia x H cap off (mm)
16 32 80*
76 x 172 96 x 210 135 x 295
76 x 170 96 x 208 135 x 291
16 32
76 x 172 96 x 210
76 x 170 96 x 208
16 32
76 x 172 96 x 210
76 x 170 96 x 208
16 32
76 x 172 96 x 210
8 16 32 80*
62 x 142 76 x 172 96 x 210 135 x 295
Dia x H cap off (mm)
220935 220936 220939
16 32 4L
76 x 172 96 x 210 160 x 340
76 x 170 96 x 208 160 x 336
28-400 33-400
24 12
With Poly-Seal® LDPE Cone Lined Black Phenolic Cap
28-400 33-400
24 12
76 x 170 96 x 208
28-400 33-400
24 12
62 x 140 76 x 170 96 x 208 135 x 291
24-400 28-400 33-400 38-439
48 24 12 6
220945 220946 220949 220955 220956 220959
16 32 4L 16 32 4L
76 x 172 96 x 210 160 x 340 76 x 172 96 x 210 160 x 340
76 x 170 96 x 208 160 x 336 76 x 170 96 x 208 160 x 336
WHEATON
Qty/Case
28-400 33-400 38-430
24 12 4
28-400 33-400 38-430
24 12 4
28-400 33-400 38-430
24 12 4
With Teflon® Faced Rubber Lined Black Phenolic Cap (Autoclavable) 220975 220976 220979
16 32 4L
76 x 172 96 x 210 160 x 340
76 x 170 96 x 208 160 x 336
28-400 33-400 38-430
24 12 4
62 x 140 76 x 170 96 x 208 160 x 336
24-400 28-400 33-400 38-430
48 24 12 4
Without Cap (Autoclavable) 220924 220925 220926 220929
8 16 32 4L*
62 x 142 76 x 172 96 x 210 160 x 340
*Manufactured with jug handle
*Manufactured with jug handle
Cap Size
With Aluminum Foil Lined Black Phenolic Cap
With Polyethylene (LDPE) Lined Black Phenolic Cap
Without Cap (Autoclavable) 220724 220725 220726 220728
Dia x H cap on (mm)
24 12 6
With Teflon® Faced Rubber Lined Black Phenolic Cap (Autoclavable) 220775 220776
Approx Size (oz)
28-400 33-400 38-439
With Poly-Seal® LDPE Cone Lined Black Phenolic Cap 220755 220756
Cat. No.
Qty/Case
With Polyethylene LDPE Lined Black Phenolic Cap 220745 220746
Plastisol coating for safety Made from amber soda-lime glass that conforms to USP Type III requirements Available with or without caps 8, 16 & 32 oz Boston Round style 4 Liter with jug handle
Cap Size
With Aluminum Foil Lined Black Phenolic Cap 220735 220736 220738
• • • • •
1.800.225.1437 (U.S. & Canada only) | +1.856.825.1100 | +1.856.825.1368 (F) | www.wheatonsci.com
16
"OTTLES ÂŹ'LASS
17
3AFETY#OATED-EDIA ,AB"OTTLE 3AFETY#OATED*AR • • • •
Plastisol coating for safety Made from clear soda-lime glass that conforms to USP Type III requirements Wide mouth for use with solid samples Available with or without caps
Cat. No.
Approx Size (oz)
Dia x H cap on (mm)
Dia x H cap off (mm)
• • • • • •
Plastisol coating for safety Made from clear borosilicate glass that conforms to USP Type I requirements 125 & 250 mL size Provided with graduations and writing patch 33-430 mm screw cap can be purchased separately Autoclavable
Cat. No.
Size (mL)
Approx Dia x H (mm)
Cap Size
Qty/Case
219455 219457
125 250
55 x 119 67 x 148
33-430 33-430
48 48
Cap Size
Qty/Case
75 x 90 78 x 146 95 x 180
70-400 70-400 70-400
12 12 12
3CREWÂŹ#APS ÂŹ"LACKÂŹ0HENOLIC
75 x 90 78 x 146 95 x 180
70-400 70-400 70-400
12 12 12
Cat. No.
Cap Size
240280 240080 240480
33-430 33-430 33-430
With Poly-Vinyl Lined Black Phenolic Cap 216627 216629 216631
8 16 32
75 x 92 78 x 147 95 x 182
Without Cap (Autoclavable) 216637 216639 216641
8 16 32
75 x 92 78 x 147 95 x 182
• Available with your choice of three liners • 14B rubber lined caps autoclavable Liner
Qty/Case
14B White Rubber Liners Polyethylene (LDPE) Liners* PTFE Faced (14B) Styrene-Butadiene
200 200 100
* Not autoclavable
3AFETY#OATED 2EAGENT"OTTLE • • • • • •
Plastisol coating for safety Clear borosilicate glass with writing patch 33-430 screw cap attached Polypropylene cap with TeonŽ liner 125 & 250 mL size Autoclavable
3AFETY#OATED,AB Š -EDIA 2EAGENT"OTTLE • • • • • • •
Plastisol coating for safety Made from clear borosilicate glass 45 mm white polypropylene screw cap attached Pour ring eliminates drips 100 to 1000 mL size Autoclavable Color coded caps available separately
Cat. No.
219935 W219937 219939 219940
Cat. No.
Size (mL)
Approx Dia x H (mm)
Cap Size
Qty/Case
221014 221017
125 250
58 x 122 69 x 151
33-430 33-430
6 6
3AFETYÂŹ#OATEDÂŹÂŹ 3OLUTIONÂŹ"OTTLEÂŹ
Size (mL)
Approx Dia x H (mm)
Cap Size (mm)
100 250 500 1000
56 x 109 70 x 144 86 x 186 101 x 233
45 45 45 45
Qty/Case
• Plastisol coating for safety • Made from low extractable borosilicate glass • Serum ďŹ nish takes rubber stopper closure
12 12 12 12
Safetyoated C
#OLOR#ODED#APSFOR,AB Š"OTTLES Cat. No.
Description
240726 240726-03 240726-04
White PP, w/ Wedge-Shaped Inner Sealing Ring Red PP, w/ Wedge-Shaped Inner Sealing Ring Blue PP, w/ Wedge-Shaped Inner Sealing Ring
Size (mm)
WHEATON
45 45 45
Qty/Case
12 12 12 Cat. No.
Size
Approx Dia x H (mm)
Stopper Size
221029
5 gallon
294 x 502
12
1.800.225.1437 (U.S. & Canada only) | +1.856.825.1100 | +1.856.825.1368 (F) | www.wheatonsci.com
Qty/Case
1
"OTTLES ÂŹ'LASS 3CREWÂŹ.ECKÂŹ$IAGNOSTICÂŹ"OTTLES
Solid Top Screw Cap
3CREWÂŹ#APSÂŹFORÂŹ3CREWÂŹ.ECKÂŹÂŹ $IAGNOSTICÂŹ"OTTLES
3CREW.ECK$IAGNOSTIC"OTTLE • • • • •
• • • •
Alternative to serum bottles and vials Can be used for lyophilization Fits with I-Loc™ closure or screw cap with stopper Superior chemical resistance Autoclavable
Screw Neck diagnostic bottles are an alternative to serum bottles and vials. Each bottle has a controlled ID which allows for ďŹ t with the I-Loc™ closure or with a 20-400 screw cap with thin ange stopper. The product is made from Wheaton 400 borosilicate glass that conforms to USP Type I requirements. Cat. No.
Capacity (mL)
Dia x H (mm)
Cap Size
Qty/Case
5 10 20 50
21 x 48 25 x 61 32 x 66 42 x 80
20-400 20-400 20-400 20-400
480 480 480 288
5 10 20 50
21 x 48 25 x 61 32 x 66 42 x 80
20-400 20-400 20-400 20-400
480 480 480 288
Clear 219360 219361 219362 219364
Amber 219370 219371 219372 219374
Open Top Screw Cap
Polypropylene screw caps in 5 colors Use with 224100-203 thin ange stopper Screw cap size 20-400 Autoclavable
Use these unlined polypropylene caps with screw neck diagnostic bottles. These solid and open topped caps come in ďŹ ve colors and can be used with thin ange lyophilization stoppers. Screw cap thread size 20-400. Cat. No.
Color
Qty/Case
Black White Red Blue Yellow
300 300 300 300 300
Black White Red Blue Yellow
300 300 300 300 300
Solid Top Screw Caps 240706-01 240706-02 240706-03 240706-04 240706-05
Open Top Screw Caps 240716-01 240716-02 240716-03 240716-04 240716-05
3TOPPER 4HIN&LANGE ) ,OCŠ#LOSURE • • • •
For use with Screw Neck Diagnostic Bottles Advantages of an aluminum seal with the convenience of a screw cap Polypropylene screw cap with gray bromobutyl/50 stopper Autoclavable
These closures are speciďŹ cally designed for diagnostic applications and offer all the advantages of an aluminum seal and stopper with the convenience of a screw cap. The unique combination of a stopper and screw cap ensures excellent sealing characteristics making them ideal for liquid reagents. The contents can be accessed using a syringe through the stopper or with a pipette after removing the screw cap. These polypropylene closures are available in black, white, red, blue, and yellow. Tolerances in the stoppers are maintained to +/-.010. Cat. No.
Color
Cap Size
Qty/Case
240676-01 240676-02 240676-03 240676-04 240676-05
Black White Red Blue Yellow
20-400 20-400 20-400 20-400 20-400
100 100 100 100 100
WHEATON
• Use with screw caps for Screw Neck Diagnostic Bottles • Gray chlorobutyl/55 3-leg lyophilization stopper • Autoclavable
Use this gray chlorobutyl/55 three-leg lyophilization stopper with Wheaton screw neck diagnostic bottles, in conjunction with open top caps (240716-01 series) or solid top caps (240706-01 series). Cat. No.
224100-203
Stopper Size
20 mm
Qty/Case
300
New &ORÂŹ3TERILEÂŹ0%4ÂŹ$IAGNOSTICÂŹ "OTTLESÂŹSEEÂŹPAGEÂŹ ÂŹ
1.800.225.1437 (U.S. & Canada only) | +1.856.825.1100 | +1.856.825.1368 (F) | www.wheatonsci.com
18
19
"OTTLES ¬'LASS 3ERUM¬"OTTLE ¬'RADUATED
3ERUM¬"OTTLES¬ ¬6IALS
cate i l i s o r o B lass G
• • • •
Made from Type I borosilicate glass Large capacity 250 & 500 mL Graduations in mL Accepts standard stoppers and seals
These bottles are manufactured from Wheaton 400 borosilicate glass that conforms to USP Type I requirements. Raised graduations indicate approximate capacities in milliliters. Cat. No.
Size (mL)
Mouth ID x OD (mm)
Dia x H (mm)
223950 223952
250 500
15 x 30 15 x 30
60 x 158 75 x 190
Qty/Case
35 24
Conforms to USP Type I Requirements
3ERUM¬4UBING¬6IAL¬ • Made from low extractable borosilicate glass • Special design adds strength for freeze-drying applications • Shrink-wrapped modules reduce particulate contamination
The blowback feature in the neck and specially designed bottom radius, for added strength, are important for lyophilization applications. The clear vials are manufactured from low extractable borosilicate glass that conforms to ASTM Type I, Class A and USP Type I requirements. The amber vials are manufactured from low extractable borosilicate glass that conforms to USP Type I requirements. Vials are packaged in shrink-wrapped modules to greatly reduce particulate contamination.
3ERUM¬"OTTLE • Fits most lyophilization applications • Borosilicate glass conforms to USP Type I requirements • Shrink-wrapped partitioned modules reduce breakage
Catalog No.
Serum bottles are ideal for long and short term sample storage, lyophilization and vaccine/injectable drug containers. These molded bottles have excellent wall strength and chemical tolerances, which are important for storage applications. Bottles are manufactured from Wheaton 400 borosilicate molded glass that conforms to USP Type I requirements. Bottles are package in shrink-wrapped partitioned modules with the exception of 2 mL size, which has no partition. Cat. No.
Size (mL)
Mouth ID x OD (mm)
Dia x H (mm)
Fits Rack
Qty/Case
7 x 13 13 x 20 13 x 20 13 x 20 13 x 20 13 x 20 13 x 20 13 x 20 13 x 20
17.5 x 35 23 x 47 25 x 54 32 x 58 37 x 63 43 x 73 41 x 91 52 x 95 54 x 107
868805 868805 868806 868615 868615 868615 868615 868617 —
288 288 288 288 288 288 144 144 144
13 x 20 13 x 20 13 x 20 13 x 20 13 x 20 13 x 20
23 x 47 25 x 54 32 x 58 37 x 63 43 x 73 52 x 95
868805 868806 868615 868615 868615 868617
288 288 288 288 288 144
Clear Serum Bottles 223712 223738 223739 223742 223743 223745 223746 223747 223748
2 5 10 20 30 50 60 100 125
Size (mL)
Mouth ID x OD (mm)
Dia x H (mm)
Fits Rack
Qty/Case
7 x 13 7 x 13 13 x 20 13 x 20 13 x 20
15 x 32 17 x 38 22 x 40 24 x 50 30.5 x 58
868804 868810 868805 — —
144 144 144 144 120
7 x 13 13 x 20 13 x 20
15 x 32 22 x 40 24 x 50
868804 868805 —
144 144 144
Clear Tubing Vials 223683 223684 223685 223686 223687
2 3 5 10 20
Amber Tubing Vials 223693 223695 223696
2 5 10
Amber Serum Bottles 223760 223761 223762 223763 223764 223766
5 10 20 30 50 100
Note: Select aluminum seal and stopper size by using the mouth OD dimension of the bottle or vial.
For Crimpers and Decappers see pages 35-36.
WHEATON
PP Serum Bottle
HDPE Serum Bottle
3ERUM¬"OTTLE ¬0OLYPROPYLENE¬ 00 • 3 mL size used extensively for diluent solutions • Accepts rubber stoppers and aluminum seals • Autoclavable at 121°C for 20 minutes Cat. No.
Size (mL)
Mouth ID x OD (mm)
Dia x H (mm)
224007
3
7 x 13
17 x 38
1.800.225.1437 (U.S. & Canada only) | +1.856.825.1100 | +1.856.825.1368 (F) | www.wheatonsci.com
Qty/Case
500
"OTTLES ¬'LASS Serum Bottles, continued...
3ERUM¬"OTTLE ¬($0%¬¬ • • • •
15, 30, 60 & 120 mL size Manufactured from high density polyethylene Widely used for animal health products and storage of non-medical products Accepts standard rubber stoppers and aluminum seals
Cat. No.
Size (mL)
Mouth ID x OD (mm)
Dia x H (mm)
224031 224033 224036 224037
15 30 60 120
13 x 20 13 x 20 13 x 20 13 x 20
28 x 56 32 x 67 38 x 84 47 x 103
Qty/Case
300 200 100 100
• Create a dropper bottle using a serum bottle with 20 mm OD • Dropper tip is made from PVC with PP cap • Dispenses 40 μL drop using water
The Dropper Tip is made from PVC with a white polypropylene overcap to protect contents and fits all 20 mm serum finish containers. It provides an economical way to convert a glass serum bottle to a dropping bottle where glass packaging is mandatory. The dropper dispenses 40 μL per drop when using distilled water at room temperature. 224080
Description
Dia x H (mm)
PVC Dropper Tip
23 x 44
Uni-Dose PET Vial
5NI $OSE ¬"OTTLE¬ ¬6IAL
3ERUM¬"OTTLE ¬¬ 06#¬$ROPPER¬4IP¬
Cat. No.
Uni-Dose Glass Bottle
Qty/Case
100
• Available in amber glass or amber PET • Mouth OD 28.5 mm • Use with Wheaton tamper evident safety cap
These products feature a large labeling surface for easy product identification. The bottles are made from Wheaton 900 soda-lime amber glass that conforms to USP Type III requirements and are packaged in convenient trays of 100. The plastic PET (Polyethylene Terephthalate) vials provide an alternative to glass and they cost less to ship. Use the 224316 Crimper to secure the tamper-evident safety caps (Cat. No. 224195) to the bottle or vial. Tamper-evident safety caps can be purchased separately. For sterilization information, see our Technical Data Section. Cat. No.
Size (mL)
Dia x H (mm)
Trays/Case
32 x 42 36 x 58 43 x 83
5 5 2
Qty/Case
Amber Glass Bottle 226732 226733 226734
15 30 60
500 500 200
Amber PET Vial 226772 226773
15 30
32 x 42 34 x 55
450 300
3NAP¬#AP¬3AMPLE¬"OTTLE • 4 to 120 mL size • Pre-attached low density polyethylene snap caps
These bottles are ideal for collecting, storing, and exhibiting a wide variety of specimens in the lab or field. The caps snap over a special sealing ring to form an effective moisture barrier. The bottles are packed in a carton constructed of corrugated trays with partitions. They are made from Wheaton 800 soda-lime clear glass that conforms to USP Type III requirements. Cat. No.
Size (mL)
Dia x H (mm)
Cap Size
225532 225534 225535 225536 225538 225539 225540 225541 225543 225544 225546
4 8 12 16 24 30 37 44 30 60 120
23 x 27 22 x 39 22 x 51 30 x 40 30 x 52 30 x 63 31 x 73 32 x 83 37 x 50 45 x 60 50 x 95
22 22 22 30 30 30 30 30 34 45 45
Qty/Case
144 144 144 144 144 144 72 72 72 72 72
4AMPER %VIDENT¬3AFETY¬#AP¬ • For use with Wheaton Uni-Dose® Bottles and Vials
These three-piece lined aluminum caps have unique metal inserts. Contents cannot be contaminated without removing cap or leaving evidence of puncture or insert. A metal tab with a rolled safety edge "perks up" to provide visual proof of tight seal. The caps remove quickly and easily in one piece. They fit all Wheaton Uni-Dose bottles and vials. Tamper-Evident Safety Cap catalog number 224196 is stamped inside "For Oral Use." Safety Caps can be attached to Uni-Dose Bottle & Vials by using the Wheaton Crimper (Cat. No. 224316). Cat. No.
Description
224195 224196 224316
Cap for Uni-Dose Bottle and Vial Cap with “For Oral Use” Imprint Crimper
For Mouth OD (mm)
28.5 28.5 28.5
Qty/Case
2500 5000 1
2EPLACEMENT¬3NAP¬#APS¬ Cat. No.
Cap Size
242612 242615 242616 242619
22 30 34 45
WHEATON
Qty/Case
200 200 200 200
For Aluminum Seals & Rubber Stoppers for serum bottles and vials see pages 32-34. Also see the new Wheaton Premium Stoppers on page 33.
1.800.225.1437 (U.S. & Canada only) | +1.856.825.1100 | +1.856.825.1368 (F) | www.wheatonsci.com
20
21
"OTTLES ¬0LASTIC &ACTORS¬FOR¬THE¬3ELECTION¬OF¬A¬0LASTIC¬#ONTAINER
P
lastic containers have been developed for a variety of applications across many different industries over the years. There are many different types of Polymers used in the creation of these containers to help fill the demands for the various applications. Polymers offer a variety of properties, each having different levels of importance with different users depending on the application. Some users may have flexibility within their product formula or filling process and therefore focus on economical containers while others may need containers that are stronger, autoclavable, transparent, sterilized, etc., therefore requiring more specifications. Wheaton Science Products can help with polymer selection through comprehension of the customer’s product, goals, and adaptability. Several questions should be posed to gather this understanding. Some examples include: • What is the container size and physical design. Narrow mouth vs. wide mouth, tall vs. short, etc.? • Must the package be transparent, translucent, opaque or colored for either marketing or light protection? • Are there specific shipment and storage conditions such as refrigeration, freezing, exclusion of light, etc.? • Are there governmental regulations pertaining to the product? • How is the product going to be dispensed by the user? • Have any tests been run in plastic? Was it unsuccessful and why? What type of plastics?
WHEATON
Many things govern polymer suitability for package use. These include: • • • • • • • • •
Permeation/Barrier Sorption Characteristics Chemical Resistance Stress Crack Resistance Rigidity/Flexibility Impact Resistance Sterilizability Recyclability Temperature Resistance
1.800.225.1437 (U.S. & Canada only) | +1.856.825.1100 | +1.856.825.1368 (F) | www.wheatonsci.com
"OTTLES ¬0LASTIC 0LASTIC¬2ESINS High Density Polyethylene (HDPE) Flexible but more rigid than LDPE. Natural color is milky white, semitranslucent depending on density. Good impact strength and stress crack resistance. Good chemical resistance. Good vapor barrier but poor gas barrier. Sterilizable via ethylene oxide (EtO) or gamma radiation. SPI resin identification code number
New
Low Density Polyethylene (LDPE) Very flexible, natural milky color, translucent with high impact strength. Excellent for mild and strong buffers, good chemical resistance. Good water vapor and alcohol barrier properties. Poor gas barrier, sterilizable with EtO or gamma radiation. Good stress crack and impact resistance. SPI resin identification code number
Polyethylene Terephthalate (PET) Semi-rigid to rigid depending on wall thickness. Natural color - clear and transparent. Good alcohol and solvent barrier; good gas and fair moisture barrier. Good to fair chemical barrier; not good for strong acids or bases. Good moldability. Sterilizable through EtO and gamma radiation. Good stress crack and impact resistance at room temperature and above. SPI resin identification code number
Polypropylene (PP) Rigid, solid, durable in container or cap forms. Opaque, natural grayish yellow in natural form. Excellent stress crack and impact resistance. Excellent moisture barrier, good oil and alcohol barrier, poor gas barrier properties. Good chemical resistance. Sterilizable with EtO or autoclaving. SPI resin identification code number
Polystyrene (PS) PS is a transparent, rigid and glasslike polymer. Good resistance to inorganic chemicals. Light and heat stable, biologically inert and nontoxic. Poor impact and stress crack resistance, poor barrier properties. EtO or gamma sterilizable. SPI resin identification code number
Resin Identification Codes Wheaton follows the Society of Plastics Industry guidelines for marking plastic containers with the appropriate code numbers as shown below:
3TERILE ¬0%4¬$IAGNOSTIC¬"OTTLE • • • •
Ideal for reagents and buffer solutions Sterilized and sold with white caps attached Clear and amber available A variety of sterile, polypropylene caps are offered separately
Wheaton PET diagnostic bottles and caps are gamma radiation sterilized. These bottles are ideal for storage and shipment of reagents and buffer solutions. They are lightweight and break resistant. They come with pre-attached white polypropylene caps lined with F217 foamed LDPE. The bottles are packaged in 20 per module and 5 modules per case. Sterile, colored caps can also be purchased separately. Assorted caps come with 1 pack each of blue, red, yellow, green, and black caps in a case of 100. Bottles and caps can be autoclaved.* Cat. No.
Size (mL)
Color
Qty/Pk
Qty/Cs
5 10 20
Clear Clear Clear
20 20 20
100 100 100
5 10 20
Amber Amber Amber
20 20 20
100 100 100
Cap Size (mm)
Color
Qty/Pk
20-410 20-410 20-410 20-410 20-410 20-410 20-410
Blue Red Yellow Green Black White Assorted
20 20 20 20 20 20 20
Clear W219981 W219982 W219983
Amber W219985 W219986 W219987
Polypropylene Screw Caps Cat. No.
W219990 W219991 W219992 W219993 W219994 W219995 W219996
Qty/Cs
100 100 100 100 100 100 100
*Autoclavable for 15 minutes at 121ºC at 15 psi.
$ISPENSING¬"OTTLE ¬,$0%¬ PETE
HDPE
PP
V
PS
Made from Low Density Polyethylene Translucent color Very flexible with high impact strength Excellent for mild and strong buffers, good chemical resistance • Raise the spout to dispense contents and depress spout to seal bottle • 60 – 500 mL capacity • • • •
LDPE
OTHER
Wheaton marks their containers on the bottom with the appropriate resin recycle code.
3EE¬THE¬4ECHNICAL¬$ATA¬SECTION¬¬ PAGES¬ ¬AND¬PAGE¬ ¬for more information on chemical compatibility, properties of plastics, permeability of plastics, and sterilization of plastics. WHEATON
Cat. No.
Size (mL)
Dia x H (mm)
Cap Size
Qty/Pack
211194 211195 211199
60 125 500
39 x 92 43 x 130 68 x 180
20-410 20-410 28-410
12 12 6
1.800.225.1437 (U.S. & Canada only) | +1.856.825.1100 | +1.856.825.1368 (F) | www.wheatonsci.com
Qty/Case
144 72 36
22
23
"OTTLES ¬0LASTIC $ROPPING¬"OTTLES
!BOUT¬7HEATON¬$ROPPING¬"OTTLES
$ISPENSING¬#HARACTERISTICS
Wheaton LDPE (Low Density Polyethylene) Dropping Bottles are available in natural or white to protect UV light sensitive products. The controlled dropping tip is easy to attach and remove from the bottle. Dropping bottles, tips and caps are manufactured to strict quality control standards to ensure the best product for your application. Many different colors and sizes are available to meet your requirements. Special sizes, colors, resins and configurations are available upon request.
Controlled dropper tips are tips which have their orifices pierced during a secondary operation. A .020 inch needle is used to pierce the tips. The general tolerance for the hole size in a pierced part is +/- 0.003 inches. The average drop size for stock, controlled round tips (8 mm – 20 mm) is 41 μL +/- 5 μL*. The Wheaton line of dropper bottles, tips and caps offer quality and versatility in a variety of dispensing applications. *Average drop size was calculated through statistical analysis of randomly selected dropper tips using distilled water at room temperature of approximately 78ºF.
$ROPPING¬"OTTLE¬/NLY ¬.ATURAL¬ ¬7HITE • Bottle made of natural or white LDPE (Low Density Polyethylene) • White LDPE bottle helps protect UV light sensitive samples • Packaged in cases of 100, 1000 or bulk Size (mL)
Cap Size
Cat. No.
Cat. No.
Cat. No.
100/Case W242830 W242831 W242832 W242833 W242834 W242835 W242836 W242837 W242838
1,000/Case W242830-A W242831-A W242832-A W242833-A W242834-A W242835-A W242836-A — —
Bulk/Case W242830-X W242831-X W242832-X W242833-X W242834-X W242835-X W242836-X W242837-X W242838-X
Bulk/Case 3000 3000 2400 1800 1400 800 1500 800 450
Natural Dropping Bottles 100/Case
1,000/Case W242820-A W242821-A W242822-A W242823-A W242824-A W242825-A W242826-A — —
Bulk/Case W242820-X W242821-X W242822-X W242823-X W242824-X W242825-X W242826-X W242827-X W242828-X
Bulk/Case 3000 3000 2600 1800 1400 800 1500 800 450
White Dropping Bottles 1 3 6 7 10 15 30 60 125 1 3 6 7 10 15 30 60 125
WHEATON
8-425 8-425 13-425 15-415 15-415 15-415 20-410 20-410 20-410 8-425 8-425 13-425 15-415 15-415 15-415 20-410 20-410 20-410
W242820 W242821 W242822 W242823 W242824 W242825 W242826 W242827 W242828
1.800.225.1437 (U.S. & Canada only) | +1.856.825.1100 | +1.856.825.1368 (F) | www.wheatonsci.com
Qty
"OTTLES ¬0LASTIC
%XTENDED¬#ONTROLLED¬$ROPPER¬4IP
$ROPPER¬4IP¬#APS
• • • •
• Screw cap made of radiation grade polypropylene • Variety of colors • Packaged in case of 100, 1000 or bulk
Tip made of LDPE (Low Density Polyethylene) Extended controlled dropper tip dispenses one drop at a time Average drop size is 41 μL +/- 5 μL Packaged in case of 100, 1000 or bulk
Color
8 mm Tip Natural Pink Red Orange Blue Gray Green Purple Yellow Brown White
13 mm Tip Natural Pink Red Orange Blue Gray Green Purple Yellow White
15 mm Tip Natural Pink Red Orange Blue Gray Green Purple Yellow Brown White
20 mm Tip Natural Pink Red Orange Blue Gray Green Purple Yellow White
Cat. No.
Cat. No.
Cat. No.
Color
Size 8-425
100/Case 242401-01 242401 242402 242403 242404 242405 242406 242407 242408 — 242410
1,000/Case W242401-01-A W242401-A W242402-A W242403-A W242404-A W242405-A W242406-A W242407-A W242408-A — W242410-A
20,000/Case W242401-01-X W242401 -X W242402 -X W242403 -X W242404 -X W242405 -X W242406 -X W242407 -X W242408 -X — W242410 -X
Natural Pink Red Orange Blue Gray Green Purple Yellow Brown White
100/Case 242411-01 242411 242412 242413 242414 242415 242416 242417 242418 242420
1,000/Case W242411-01-A W242411-A W242412-A W242413-A W242414-A W242415-A W242416-A W242417-A W242418-A W242420-A
10,000/Case W242411-01-X W242411 -X W242412 -X W242413 -X W242414 -X W242415 -X W242416 -X W242417 -X W242418 -X W242420 -X
Natural Pink Red Orange Blue Gray Green Purple Yellow White
100/Case 242421-01 242421 242422 242423 242424 242425 242426 242427 242428 — 242430
1,000/Case W242421-01-A W242421-A W242422-A W242423-A W242424-A W242425-A W242426-A W242427-A W242428-A — W242430-A
9,000/Case W242421-01-X W242421 -X W242422 -X W242423 -X W242424 -X W242425 -X W242426 -X W242427 -X W242428 -X — W242430 -X
Natural Pink Red Orange Blue Gray Green Purple Yellow Brown White
100/Case 242431-01 242431 242432 242433 242434 242435 242436 242437 242438 242440
1,000/Case W242431-01-A W242431-A W242432-A W242433-A W242434-A W242435-A W242436-A W242437-A W242438-A W242440-A
5,000/Case W242431-01-X W242431 -X W242432 -X W242433 -X W242434 -X W242435 -X W242436 -X W242437 -X W242438 -X W242440 -X
Natural Pink Red Orange Blue Gray Green Purple Yellow White
Size 13-425
Size 15-415
Size 20-410
Cat. No.
Cat. No.
100/Case 242501-01 242501 242502 242503 242504 242505 242506 242507 242508 242509 242510
1,000/Case W242501-01-A W242501-A W242502-A W242503-A W242504-A W242505-A W242506-A W242507-A W242508-A W242509-A W242510-A
26,000/Case W242501-01-X W242501 -X W242502 -X W242503 -X W242504 -X W242505 -X W242506 -X W242507 -X W242508 -X — W242510 -X
100/Case 242531-01 242531 242532 242533 242534 242535 242536 242537 242538 242540
1,000/Case W242531-01-A W242531-A W242532-A W242533-A W242534-A W242535-A W242536-A W242537-A W242538-A W242540-A
15,000/Case W242531-01-X W242531 -X W242532 -X W242533 -X W242534 -X W242535 -X W242536 -X W242537 -X W242538 -X W242540 -X
100/Case 242511-01 242511 242512 242513 242514 242515 242516 242517 242518 242519 242520
1,000/Case W242511-01-A W242511-A W242512-A W242513-A W242514-A W242515-A W242516-A W242517-A W242518-A W242519-A W242520-A
8,000/Case W242511-01-X W242511 -X W242512 -X W242513 -X W242514 -X W242515 -X W242516 -X W242517 -X W242518 -X — W242520 -X
100/Case 242521-01 242521 242522 242523 242524 242525 242526 242527 242528 242530
1,000/Case W242521-01-A W242521-A W242522-A W242523-A W242524-A W242525-A W242526-A W242527-A W242528-A W242530-A
4,500/Case W242521-01-X W242521 -X W242522 -X W242523 -X W242524 -X W242525 -X W242526 -X W242527 -X W242528 -X W242530 -X
See page 25 for dropping bottles, tips, and caps packaged together.
WHEATON
1.800.225.1437 (U.S. & Canada only) | +1.856.825.1100 | +1.856.825.1368 (F) | www.wheatonsci.com
Cat. No.
24
"OTTLES ¬0LASTIC
25
er Dropp d e l l o Contr ith Filter Tip w
$ROPPING¬"OTTLE ¬.ATURAL ¬WITH¬4IP¬ ¬#AP
$ROPPING¬"OTTLE ¬WITH¬4IP¬ ¬#AP
• • • •
• • • •
Bottle made of LDPE (Low Density Polyethylene) Extended controlled dropper tip contains filter Filtered tip removes particulates when delivering liquid Polypropylene caps packaged separately
The bottles are manufactured from natural LDPE (Low Density Polyethylene). The filter tip has a pore size of 20 to 30 microns. The filter tip is designed to remove particulates when delivering liquids. The average drop size for a filtered tip is 18 μL +/- 1 μL. The white polypropylene screw cap is autoclavable. The bottle is not autoclavable. Dropper bottles, tips and caps are packaged separately. Cat. No.
Size (mL)
Dia x H (mm)
Cap Size
Qty/Pack
211590 211592
1 3
12 x 36 14 x 49
8-425 8-425
12 12
Qty/Case
144 144
a
Bottle made of LDPE (Low Density Polyethylene) Extended controlled dropper tip dispenses one drop at a time Average drop size is 41 μL+/- 5 μL Radiation grade polypropylene screw caps and tips packaged separately
The bottles are manufactured from natural LDPE (Low Density Polyethylene). The white pigmentation in the white dropping bottle helps protect UV light-sensitive samples. The tip is designed to dispense one drop at a time. Average drop size is 41 μL +/- 5 μL. The tip snaps into place and is easily removed for filling. The white polypropylene screw cap is autoclavable. The bottle is not autoclavable. Dropper bottles, tips and caps are packaged separately. Cat. No.
Size (mL)
Dia x H (mm)
Cap Size
Qty/Pack
Qty/Case
12 x 36 14 x 49 17 x 58 19 x 63 25 x 78 32 x 85 39 x 101 47 x 125
8-425 8-425 13-425 15-415 15-415 20-410 20-410 20-410
12 12 12 12 12 12 12 6
144 144 144 144 144 144 144 72
12 x 36 14 x 49 17 x 58 19 x 63 25 x 78 32 x 85 39 x 101 47 x 125
8-425 8-425 13-425 15-415 15-415 20-410 20-410 20-410
12 12 12 12 12 12 12 6
144 144 144 144 144 144 144 72
Natural Dropping Bottles 211628 211630 211631 211632 211633 211634 211635 211636
m Strea s e s n Dispef Liquid o
enses DispD rop One Time ta
1 3 6 7 15 30 60 125
White Dropping Bottles 211618 211620 211621 211622 211623 211624 211625 211626
1 3 6 7 15 30 60 125
$ROPPING¬"OTTLE ¬.ATURAL ¬WITH¬4IP¬ ¬#AP • Bottle made of LDPE (Low Density Polyethylene) • Tip dispenses a stream of liquid • Radiation grade polypropylene cap packaged separately
The bottles are manufactured from natural LDPE (Low Density Polyethylene). The tip is designed to dispense a stream of liquid. Use it when a controlled drop is not desired. The tip snaps into place and is easily removed for filling. The white polypropylene screw cap is autoclavable. The bottle is not autoclavable. Dropper bottles, tips and caps are packaged separately. Cat. No.
Size (mL)
Dia x H (mm)
Cap Size
Qty/Pack
211602 211603 211604 211605 211606 211607
6 7 15 30 60 125
17 x 58 19 x 63 25 x 78 32 x 85 39 x 101 47 x 125
13-425 15-415 15-415 20-410 20-410 20-410
12 12 12 12 12 6
Qty/Case
See pages 23-24 to purchase dropping bottles, tips, and caps separately.
WHEATON
144 144 144 144 144 72
$ROPPING¬"OTTLE¬6IAL¬&ILE • • • • •
3 mL LDPE (Low Density Polyethylene) bottles Assembled with dropper tip and cap attached to bottle Average drop size is 41 μL +/- 5 μL Packaged in a reusable plastic case Extended controlled dropper tip dispenses one drop at a time
Vial Files are sized to provide optimum storage in minimum space. Alphanumerical indexing of contents provides quick identification and location of samples. Each case contains 40 vials arranged in four rows of 10. Cat. No.
Size (mL)
Dia x H (mm)
Cap Size
Vials/File
211641
3
14 x 49
8-425
40
1.800.225.1437 (U.S. & Canada only) | +1.856.825.1100 | +1.856.825.1368 (F) | www.wheatonsci.com
Qty/Case
1
"OTTLES ¬0LASTIC 'ENERAL¬0URPOSE¬0LASTIC¬"OTTLES
2OUND¬"OTTLE ¬,$0% ¬4RANSLUCENT Natural Cylinder Round
White Cylinder Round
#YLINDER¬2OUND¬"OTTLE ¬($0% ¬.ATURAL • • • • •
High Density Polyethylene, natural color Good chemical resistance Narrow mouth ideal for liquids 30 – 500 mL sizes Pre-attached white polypropylene screw cap with foamed polyethylene liner
Cat. No.
Size (oz)
Size (mL)*
Dia x H (mm)
Cap Size
Qty/Pack
221153 221154 221155 221159
1 2 4 16
30 60 125 500
27 x 78 35 x 98 41 x 123 67 x 176
20-410 20-410 20-410 28-410
12 12 12 8
Qty/Case
72 72 72 48
• • • • • •
Low Density Polyethylene, translucent color LDPE is very flexible with high impact strength Excellent for mild and strong buffers, good chemical resistance Narrow mouth ideal for liquids 7 – 125 mL sizes Pre-attached white polypropylene screw cap with foamed polyethylene liner
Cat. No.
Size (mL)
Dia x H (mm)
Cap Size
Qty/Pack
221140 221142 221143 221144 221145
7 15 30 60 125
19 x 63 25 x 78 33 x 73 39 x 88 47 x 109
15-415 15-415 20-410 20-410 20-410
12 12 12 12 12
Qty/Case
144 144 72 72 72
*Approximate capacity
#YLINDER¬2OUND¬"OTTLE ¬($0% ¬7HITE¬ • • • • • •
High Density Polyethylene, white color White HDPE helps protect light sensitive samples Good chemical resistance Narrow mouth ideal for liquids 30 – 120 mL sizes Pre-attached white polypropylene screw cap with foamed polyethylene liner
Cat. No.
Size (mL)
Dia x H (mm)
Cap Size
Qty/Pack
221163 221164 221165
30 60 120
27 x 78 35 x 98 41 x 123
20-410 20-410 24-410
12 12 12
Qty/Case
72 72 72
PET Bottle
Sterile PET Bottle
0%4¬"OTTLE ¬4RANSPARENT¬ • • • • • • • •
Cat. No.
Size (mL)
Dia x H (mm)
Cap Size
Qty/Pack
221131 221133 221135
22 45 120
29 x 64 36 x 76 41 x 120
20-415 20-400 20-410
12 12 12
Qty/Case
72 72 72
0%4¬"OTTLE ¬4RANSPARENT ¬3TERILE
*UG ¬($0% • • • • •
Polyethylene Terephthalate, transparent PET offers clarity of glass with the safety of plastic Good alcohol and solvent barrier; not good for strong acids and bases Sterilizable through EtO and gamma radiation 120 mL cylinder round style, smaller sizes have sloped shoulders Narrow mouth ideal for liquids 22 – 120 mL size Pre-attached white polypropylene screw cap with foamed polyethylene liner
High Density Polyethylene, natural color Good chemical resistance Narrow mouth ideal for liquids 1 gallon size Pre-attached white polypropylene screw cap with polyvinyl liner
Cat. No.
Size
Cross Section x H (mm)
Cap Size
Qty/Case
222333
1 gallon
143 x 285
38-400
4
WHEATON
• • • • • • •
Sterile and individually wrapped Excellent for sensitive cell culture or production sampling Good chemical resistance against mild acids, oils and alcohol PET offers clarity of glass with the safety of plastic Narrow mouth ideal for liquids 125 mL size Pre-attached white polypropylene screw cap with foamed polyethylene liner
Cat. No.
Size (mL)
Dia x H (mm)
Cap Size
Qty/Case
219955
125
52 x 115
33-430
12
1.800.225.1437 (U.S. & Canada only) | +1.856.825.1100 | +1.856.825.1368 (F) | www.wheatonsci.com
26
"OTTLES ÂŹ0LASTIC
27
General Purpose Bottles, continued...
7IDE-OUTH2OUND0ACKER ($0% .ATURAL 7IDE-OUTH"LAKE0ACKER ($0% .ATURAL • • • • • •
High Density Polyethylene, natural Good chemical resistance Blake design maximizes storage space Wide mouth ideal for solids 120 – 1000 mL size Pre-attached white polypropylene screw cap with foamed polyethylene liner
Cat. No.
Size (oz)
Size (mL)*
Dia x H (mm)
Cap Size
Qty/Case
209683 209685 209686
4 16 32
120 500 1000
41 x 50 x 94 62 x 77 x 149 79 x 96 x 192
38-400 43-400 53-400
72 48 24
• • • • • •
High Density Polyethylene, natural Good chemical resistance Round style Wide mouth ideal for solids 60 – 1000 mL size Pre-attached white polypropylene screw cap with foamed polyethylene liner
Cat. No.
Size (oz)
Size (mL)*
Dia x H (mm)
Cap Size
Qty/Case
209672 209673 209674 209675 209676
2 4 8 16 32
60 120 250 500 1000
39 x 77 50 x 88 65 x 102 77 x 142 95 x 179
33-400 38-400 53-400 53-400 53-400
72 72 72 48 24
*Approximate capacity
*Approximate capacity
&ORÂŹTHEÂŹ3MALLERÂŹ3AMPLESÂŹINÂŹ,IFEÂŹÂŹ ÂŹÂŹÂŹÂŹSEEÂŹTHEÂŹ6IALÂŹ3ECTIONÂŹONÂŹPAGESÂŹ
WHEATON
1.800.225.1437 (U.S. & Canada only) | +1.856.825.1100 | +1.856.825.1368 (F) | www.wheatonsci.com
"OTTLES ¬0LASTIC
28
New 7IDE¬-OUTH¬#ONTAINER ¬0OLYSTYRENE
7IDE¬-OUTH¬0LASTIC¬#ONTAINERS • • • • • • •
• • • •
Wide mouth design is ideal for large solid samples Safer to use than glass jars Choice of resins: HDPE, polypropylene or polystyrene Clear polystyrene offers clarity of glass Polypropylene is autoclavable 30 to 3840 mL size Optional foam-lined caps help prevent leaks
The Wheaton line of wide mouth plastic containers are ideal for use with powders and solids. The large surface area of these containers makes it easy to label, either on the wide-mouth cap or directly on the side of the container. Unlike glass jars, plastic jars will not break easily when bumped or dropped. This makes these jars an excellent choice for lab or field sampling. Only the polypropylene containers are autoclavable.
Clear polystyrene offers clarity of glass and safety of plastic Good resistance to inorganic chemicals 30 to 1000 mL size Pre-attached white polypropylene screw cap with foamed polyethylene liner
Cat. No.
Size (mL)
Cap Size
Qty/Case
W209912 W209913 W209914 W209915 W209916 W209917
30 60 125 250 500 1000
43-400 53-400 58-400 89-400 89-400 120-400
72 48 36 36 24 24
7IDE¬-OUTH¬#ONTAINER ¬($0% • • • •
7IDE¬-OUTH¬#ONTAINER ¬00¬ !UTOCLAVABLE • Durable container with good chemical resistance • 30 to 1000 mL size • Pre-attached white polypropylene screw cap unlined or with foamed polyethylene liner • Polypropylene container with linerless cap is autoclavable Cat. No.
Size (mL)
Cap Size
30 60 125 250 500 1000
43-400 53-400 58-400 89-400 89-400 120-400
72 48 36 36 24 24
Polypropylene with Polyethylene Lined Cap Attached W209906 W209907 W209908 W209909 W209910 W209911
30 60 125 250 500 1000
43-400 53-400 58-400 89-400 89-400 120-400
Cat. No.
Size (mL)
Cap Size
Qty/Case
W209677 W209678 W209679
2000 3000 3840
89-400 100-400 89-400
6 4 4
Qty/Case
Polypropylene with Linerless Cap Attached (Autoclavable) W209900 W209901 W209902 W209903 W209904 W209905
HDPE, natural color Good chemical resistance Largest container available: 2000 to 3840 mL size Pre-attached white polypropylene screw cap with foamed polyethylene liner
72 48 36 36 24 24
Resin Identification Codes Wheaton follows the Society of Plastics Industry guidelines for marking plastic containers with the appropriate code numbers as shown below:
PETE
HDPE
PP
V
PS
LDPE
OTHER
Wheaton marks their containers on the bottom with the appropriate resin recycle code.
WHEATON
1.800.225.1437 (U.S. & Canada only) | +1.856.825.1100 | +1.856.825.1368 (F) | www.wheatonsci.com
"OTTLES ¬0LASTIC
29
,EAK¬2ESISTANT¬.ARROW¬-OUTH¬"OTTLES
,EAK¬2ESISTANT¬7IDE¬-OUTH¬"OTTLES
• • • • •
• • • • •
HDPE, LDPE or Polypropylene Amber or natural Leak resistant design with double-seal closure No-drip pour lip for safe and clean pouring Cap attached
HDPE, LDPE or Polypropylene Amber or natural Leak resistant design with double-seal closure No-drip pour lip for safe and clean pouring Cap attached
Premium narrow mouth plastic bottles feature our superior double seal closure, which is designed to be leak resistant. The special no-drip pour lip ensures safe, clean pouring. Bottles are convenience packed with polypropylene closures attached.
Premium wide mouth plastic bottles feature a superior double seal closure, designed to be leak resistant. The special no-drip pour lip ensures safe, clean dispensing. These bottles are convenience packed with polypropylene closures attached.
Cat. No.
Cat. No.
Size (oz)*
Size (mL)
Dia x H (mm)
Cap Size
Qty/Pack
Qty/Case
Low Density Polyethylene, Natural 208923 208924 208925 208926 208927 208928 208929
.3 .5 1 2 4 8 16
8 15 30 60 125 250 500
25 x 43 25 x 56 32 x 69 39 x 84 50 x 101 61 x 129 72 x 171
20-410 20-410 20-410 20-410 24-410 24-410 28-410
12 12 12 12 12 12 12
72 72 72 72 72 72 48
13-425 20-410 20-410 20-410 20-410 24-410 24-410 28-410 38-430
12 12 12 12 12 12 12 12 6
72 72 72 72 72 72 72 48 24
13-425 20-410 20-410 20-410 20-410 24-410 24-410 28-410 38-430
12 12 12 12 12 12 12 12 6
72 72 72 72 72 72 72 48 24
13-425 20-410 20-410 20-410 20-410 24-410 24-410 28-410 38-430
12 12 12 12 12 12 12 12 6
72 72 72 72 72 72 72 48 24
High Density Polyethylene, Natural 209041 209043 209044 209045 209046 209047 209048 209049 209050
.1 .3 .5 1 2 4 8 16 32
4 8 15 30 60 125 250 500 1000
16 x 38 25 x 43 25 x 56 32 x 69 34 x 84 50 x 101 61 x 129 72 x 171 91 x 210
High Density Polyethylene, Amber 209121 209123 209124 209125 209126 209127 209128 209129 209130
.1 .3 .5 1 2 4 8 16 32
4 8 15 30 60 125 250 500 1000
Size (oz)*
Size (mL)
Dia x H (mm)
Cap Size
Qty/Pack
Qty/Case
33 x 69 39 x 68 51 x 98 61 x 125 72 x 164
28-410 28-410 38-410 43-410 53-410
12 12 12 12 12
72 72 72 72 48
33 x 69 39 x 88 51 x 98 61 x 125 72 x 164 91 x 199
28-410 28-410 38-410 43-410 53-410 63-415
12 12 12 12 12 12
72 72 72 72 48 48
33 x 69 39 x 88 51 x 98 61 x 125 72 x 164 91 x 199
28-410 28-410 38-410 43-410 53-410 63-415
12 12 12 12 12 12
72 72 72 72 48 48
28-410 28-410 38-410 43-410 53-410
12 12 12 12 12
72 72 72 72 48
Low Density Polyethylene, Natural
16 x 38 25 x 43 25 x 56 32 x 69 34 x 84 50 x 101 61 x 129 72 x 171 91 x 210
209425 209426 209427 209428 209429
1 2 4 8 16
30 60 125 250 500
High Density Polyethylene, Natural 209545 209546 209547 209548 209549 209550
1 2 4 8 16 32
30 60 125 250 500 1000
High Density Polyethylene, Amber 209625 209626 209627 209628 209629 209630
1 2 4 8 16 32
30 60 125 250 500 1000
Polypropylene, Natural (Autoclavable) 209665 209666 209667 209668 209669
1 2 4 8 16
30 60 125 250 500
33 x 69 39 x 88 51 x 98 61 x 125 72 x 164
*Approximate capacity
Polypropylene, Natural (Autoclavable) 209161 209163 209164 209165 209166 209167 209168 209169 209170
.1 .3 .5 1 2 4 8 16 32
4 8 15 30 60 125 250 500 1000
16 x 38 25 x 43 25 x 56 32 x 69 34 x 84 50 x 101 61 x 129 72 x 171 91 x 210
Double Seal Closure Leak resistant double seal ensures safe transport for samples
No-Drip Pour Lip Special lip is designed to prevent liquids from spilling down the side while pouring
*Approximate capacity
Color code your leak resistant narrow mouth bottles with Wheaton colored screw caps. See page 42 for ordering information.
WHEATON
1.800.225.1437 (U.S. & Canada only) | +1.856.825.1100 | +1.856.825.1368 (F) | www.wheatonsci.com
"OTTLES ¬0LASTIC -EDIA¬"OTTLES -EDIA¬"OTTLE ¬3TERILE¬0%4¬ • • • •
Permanent in-mold graduations No-drip pour lip Lightweight 20% headspace for additives
Wheaton PET Square Media Bottles are manufactured from polyethylene terephthalate which provides the clarity of glass, the strength of plastic, and a space-saving design. These sterile bottles are tested superior for pH stability, temperature durability, cloning efficiency and cytotoxicity. Graduations: size 125 mL is graduated in 25 mL increments; size 500 mL is graduated in 50 mL increments. The bottles come with caps pre-attached and are shrink-wrapped in convenient trays. Cat. No.
Size (mL)
Dimensions (L x W x H)
Cap Size
Qty/Tray
219975 219979
125 500
53 x 53 x 99 mm 75 x 75 x 175 mm
33-430 33-430
24 12
48 24
125 & 500 mL Bottle
Nperw oved
-EDIA¬"OTTLE ¬3TERILE¬0%4¬ • • • • •
Qty/Case
New improved 1 Liter Bottle Thicker wall weight Wide mouth design Permanent in-mold graduations Linerless closure
Im
New Improved 1 Liter Bottle
The new improved 1 L Sterile PET (polyethylene terephthalate) media bottle’s wall weight has been increased by 30%, providing added handling strength and an increased permeation barrier. The mouth of the bottle has increased from 33 mm to 38 mm, providing greater space for pipette entry, which minimizes the risk of contamination. Our engineers integrated the Wheaton superior leak proof designed, double-seal closure system, found on our HDPE leak-resistant bottles, into the 1000 mL PET Media Square. This improved closure system greatly increases seal integrity and eliminates the risk of contamination from cap lining materials. Graduations: size 1 L is graduated in 100 mL increments. Cat. No.
W219980
Size (mL)
Dimensions (L x W x H)
Cap Size
Qty/Tray
1000
91 x 91 x 220 mm
38-430
12
Qty/Case
24
For a sterile, individually wrapped PET media bottle, see page 26.
For a plastic serum bottle see page 19.
Eliminate the need to hand pour plates and tubes by using the automated Omnispense® Plus Dispenser. For more details see page 126.
3PRAY¬"OTTLE¬ • • • •
Bottle made of LDPE (Low Density Polyethylene) Includes bottle, atomizer tip, dip tube and screw cap Screw cap made from polypropylene 15 – 60 mL size
Cat. No.
Size (mL)
Cross Section x H (mm)
Cap Size
Shelf/Pack
226432 226433 226434 226436
15 20 35 60
19 x 33 x 75 20 x 38 x 83 22 x 46 x 94 27 x 53 x 108
15-415 15-415 18-410 18-410
12 12 12 12
WHEATON
Qty/Case
144 144 144 144
1.800.225.1437 (U.S. & Canada only) | +1.856.825.1100 | +1.856.825.1368 (F) | www.wheatonsci.com
30
31
#APS¬ ¬#LOSURES 7HEATON¬#APS¬ ¬#LOSURES Wheaton Science Products completes your package with the right closure. We provide a wide variety of caps, seals and stoppers to ensure a perfect fit for your container. Wheaton offers closures suited for a wide range of applications. Products include: • • • • • • • • • •
Aluminum seals ................................... 32-33 New Complete Coat rubber stoppers ................ 33 I-LOC™ Closures........................................ 42 Leak resistant caps .................................. 42 Microlink® caps ........................................ 39 Rubber stoppers ................................. 33-34 Screw thread GPI finish caps ............... 37-42 Septa ........................................................ 38 Snap caps ................................................. 42 New Ultra Pure rubber stoppers........................ 33
#APS¬ ¬&INISHES Screw thread cap sizes are expressed in two numbers, which refer to the cap diameter (in millimeters) and the GPI finish (the top of the container). For example, a size 28-430 cap has a thread diameter of 28 mm, and fits a container with a 430 GPI thread finish. Below is a selection of caps and finishes.
425
400
410
415
350
430
Glass Serum Finish
Double Seal Closure & No-Drip Pour Lip
Snap Cap
Double Seal Closure
No-Drip Pour Lip
Wheaton I-LOC™ Closure
Plastic Serum Finish
Lab 45
#AP¬,INER¬3PECIlCATIONS Material
Description
Applications
Poly-Vinyl
One mil poly-vinyl film bonded to one mil HDPE on a #30 white pulp paper backing. Superior to plain pulp paper because it provides an excellent moisture barrier.
General purpose: Suitable for wide range of applications. Chemical resistance: Good for mild acids, alkalis, solvents, alcohols, oils and aqueous products. Poor for active hydrocarbons and bleaches.
Teflon® Faced Foamed Polyethylene
Teflon faced foamed polyethylene liner that offers the excellent chemical resistance of Teflon with the compressibility and sealing properties of polyethylene foam.
Typical applications: analytical lab samples, high purity chemicals, strong acids, solvents. Excellent for environmental samples, pharmaceuticals and diagnostic reagents.
Poly-Seal®
Manufactured from polyethylene (LDPE). The unique cone design provides a wedge type seal that not only seals across the top but also across the inside diameter.
Unique problem solving type of liner. This liner is stress crack resistant and offers superior torque retention and excellent sealing characteristics. It is recommended that this liner be tested prior to use for leak seal.
Styrene-Butadiene Rubber (14B)
The 14B white rubber lining material consists of homogeneous sulfur cured styrene-butadiene rubber. FDA Status complies with 21CFR 177.26, “Rubber articles intended for repeated use.”
Excellent properties of resilience, resistant to moisture vapor. Satisfactory for most moderate chemicals. Not good for oils, strong acids and hydrocarbons. Autoclavable.
Teflon® Faced Rubber
The white rubber/0.005" PTFE liner consists of virign PTFE bonded to the white sulfur cured styrene-butadiene rubber. Complies with the FDA 21CFR 177.1550.
Designed for the ultimate in product safety. PTFE provides totally inert inner seal and surface facing the sample or product. Autoclavable.
WHEATON
1.800.225.1437 (U.S. & Canada only) | +1.856.825.1100 | +1.856.825.1368 (F) | www.wheatonsci.com
#APS¬ ¬#LOSURES !LUMINUM¬3EALS
Open Top Lined Seal
Open Top Lined Seal
Open Top Unlined Seal
Center Disc Tear-Out Lined Seal
Solid Top Unlined Seal
,INED¬!LUMINUM¬3EALS¬ These seals are ideal for filling or retrieving contents with a syringe and as closures for many instrumentation applications. The 8 mm seal is designed for smaller serum finish vials commonly used in autosamplers. Cat. No.
Color
For Mouth OD (mm)
Shelf Pack
Qty/Case
Open Top Seal Lined with Teflon® Faced Natural Red Rubber 224209-01 224211-01 224211-05 224211-06 224211-07
Natural Natural Blue Red Green
8 11 11 11 11
100 100 100 100 100
1000 1000 1000 1000 1000
100 100 100 100 100
1000 1000 1000 1000 1000
Open Top Seal Lined with Teflon® Faced Silicone 224218-01 224219-01 224219-05 224219-06 224219-07
Natural Natural Blue Red Green
8 11 11 11 11
Center Disc Tear-Out Seal Lined with Teflon® Faced Natural Red Rubber 224222-01 224223-01
Natural Natural
13 20
100 100
1000 1000
100 100 100 100
1000 1000 1000 1000
100 100
1000 1000
Open Top Seal Lined with PTFE/Silicone/PTFE This seal is recommended for use in autosamplers. 224231-01 224231-05 224231-06 224231-07
Natural Blue Red Green
11 11 11 11
Open Top Seal Lined with Teflon® Faced Gray Butyl 224234-01 224235-01
Center Disc Tear-Out Unlined Seal
Natural Natural
8 11
Tear-Off Unlined Seal
5NLINED¬!LUMINUM¬3EALS We offer unlined aluminum seals in a wide range of styles and sizes, in natural aluminum, blue, red and green. Cat. No.
Color
For Mouth OD (mm)
Shelf Pack
Qty/Case
Open Top Unlined Aluminum Seals 224175-01 224175-05 224175-06 224175-07 224176-01 224176-05 224176-06 224176-07 224177-01 224177-05 224177-06 224178-01 224178-05 224178-06 224178-07
Natural Blue Red Green Natural Blue Red Green Natural Blue Red Natural Blue Red Green
8 8 8 8 11 11 11 11 13 13 13 20 20 20 20
— — — — 100 100 100 100 100 100 100 100 100 100 100
1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000
Center Disc Tear-Out Unlined Aluminum Seals The center disc tears out, exposing the top of the stopper to the syringe. 224182-01 224182-05 224182-06 224182-07 224183-01 224183-05 224183-06 224183-07 224187-01
Natural Blue Red Green Natural Blue Red Green Natural
13 13 13 13 20 20 20 20 30
100 100 100 100 100 100 100 100 100
1000 1000 1000 1000 1000 1000 1000 1000 1000
Solid Top Unlined Aluminum Seals These seals are excellent for long-term storage of samples. 224189 224191
4AMPER¬%VIDENT¬3AFETY¬#APS¬ These three-piece lined aluminum caps have unique metal inserts. Contents cannot be pilfered without removing cap or leaving evidence of puncture or insert. A metal tab with a rolled safety edge “perks up” to provide visual proof of tight seal. The caps remove quickly and easily in one piece. They fit all Wheaton Uni-Dose® Bottles and Vials (see page 20). Cap 224196 is stamped inside “For Oral Use.” For Mouth OD (mm)
224195 224196
28.5 28.5
WHEATON
11 20
100 100
1000 1000
Tear-Off Unlined Aluminum Seals This seal can be completely removed and the contents readily poured from bottle.
With Pulp/Saran Liners
Cat. No.
Natural Natural
Qty/Case
2500 5000
224192-01 224192-05 224192-06 224192-07 224193-01 224193-05 224193-06 224193-07 224197-01
Natural Blue Red Green Natural Blue Red Green Natural
13 13 13 13 20 20 20 20 30
1.800.225.1437 (U.S. & Canada only) | +1.856.825.1100 | +1.856.825.1368 (F) | www.wheatonsci.com
100 100 100 100 100 100 100 100 100
1000 1000 1000 1000 1000 1000 1000 1000 1000
32
33
#APS¬ ¬#LOSURES
Tear Cap Seal
Flip Cap Seal
Flip Cap Seals are easy to use, autoclavable and tamper-evident. Push upward on the red plastic button to access the stopper or septum. There are no sharp metal edges to cut fingers or gloves. Plus, you can remove the Flip Cap button with one hand, freeing the other for the syringe. Tear Cap Seals are used for center tear-off and complete tear-off applications. The red plastic top flips off easily with pressure from the thumb exposing the aluminum seal with center hole and pull ring. Access contents by syringe or seal can be torn off completely by pulling on the center tear ring. This seal addresses the need for a recyclable product, especially in Europe, which allows the complete separation of plastic, aluminum, rubber and glass after use. Cat. No.
For Mouth OD (mm)
Shelf Pack
Qty/Case
13 20
100 100
1000 1000
20
100
1000
Flip Cap Seal 224202 224203
Tear Cap Seal 224208
Teflon® Faced Gray Butyl Septa
Silicone Septa
&LIP¬AND¬4EAR¬#AP¬!LUMINUM¬3EALS¬
3EPTA¬FOR¬5NLINED¬!LUMINUM¬3EALS Cat. No.
For Mouth OD (mm)
Qty/Case
Silicone Septa 224162 224163
13 20
1000 1000
13 20 30
100 100 100
Teflon® Faced Silicone Septa 224172 224173 224174
Teflon® Faced Gray Butyl Septa This is a special molded seal with a Teflon® insert. Sealing surfaces of butyl and Teflon® effect a more positive seal than plain Teflon® faced septa. 224168*
20
100
This item is a specially molded septa with a Teflon® inset. The sealing surface of butyl and Teflon® effect a more positive seal than plain Teflon® faced septa.
7HEATON¬0REMIUM¬3TOPPERS
New
Straight Plug
Wheaton’s premium stoppers add confidence with purity. There are three new styles to choose from. Two of the styles feature a new rubber formulation that redefines rubber purity. The third style is a stopper that is completely coated with a fluorinated polymer coating. This coating gives the stopper a chemical resistance similar to the chemical resistance of PTFE. As a result, this coating ensures sample purity. These stoppers are a good choice if you are using harsh chemicals that require high levels of purity.
3-Leg
Igloo
2-Leg
Cat. No.
W224100-400 W224100-401 W224100-402 W224100-405 W224100-406 W224100-407 W224100-408
For Mouth ID x OD (mm)
Stopper Style
7 x 13 7 x 13 7 x 13 13 x 20 13 x 20 13 x 20 13 x 20
Straight Plug 2-Leg Stopper Igloo Stopper Straight Plug 2-Leg Stopper 3-Leg Stopper Igloo Stopper
Stopper Material Shelf Pack Qty/Case
Gray Bromobutyl/47 Gray Bromobutyl/46 Gray Bromobutyl/46 Gray Bromobutyl/47 Gray Bromobutyl/46 Gray Bromobutyl/46 Gray Bromobutyl/46
100 100 100 100 100 100 100
1000 1000 1000 1000 1000 1000 1000
5LTRA¬0URE¬3TOPPER
#OMPLETE¬#OAT¬3TOPPER
Straight Plug Stopper
Straight Plug Stopper
Wheaton’s new Ultra Pure straight plug stoppers are made from a bromobutyl rubber compound containing the highest level of chemical purity. These stoppers are Water for Injection (WFI) compatible. They also have an ultra low level of extractables and they remain stable when exposed to gamma irradiation making them very well suited for Ready-for-Sterilization and Ready-for-Use applications.
Wheaton’s new Complete Coat stoppers are completely coated with a fluorinated polymer that has barrier properties similar to PTFE. The fluorinated polymer coating is all that comes in contact with the sample. Chemical reactions due to unwanted interference with the rubber itself are virtually eliminated. These stoppers are manufactured in a siliconefree environment. A specialized manufacturing process is used to produce extremely low levels of visible and subvisible particles. These stoppers provide users the greatest level of confidence in avoiding interference with samples.
Lyophilization Stopper Wheaton’s new Ultra Pure lyophilization stoppers are made from a bromobutyl rubber compound containing the highest level of chemical purity. These stoppers demonstrate a very low level of moisture absorption and a low level of extractables. They are compatible with Water for Injection (WFI) applications and are not suitable for packaging applications. They are free from natural rubber or natural rubber latex. They are ideal for use in most lyophilization applications. WHEATON
Cat. No.
W224100-420 W224100-421
For Mouth ID x OD (mm)
Stopper Style
7 x 13 13 x 20
Straight Plug Straight Plug
Stopper Material Shelf Pack Qty/Case
Gray Bromobutyl/39 Gray Bromobutyl/39
1.800.225.1437 (U.S. & Canada only) | +1.856.825.1100 | +1.856.825.1368 (F) | www.wheatonsci.com
100 100
1000 1000
#APS¬ ¬#LOSURES 2UBBER¬3TOPPERS Wheaton offers the cleanest, most precise pharmaceutical grade rubber stoppers available for research and parenteral drug applications. • Production equipment is engineered to yield components with exceptional dimensional stability • Manufacturing tolerances for flange heights on stock stoppers are routinely held to ±.010" • A variety of styles and sizes are available • Manufactured from the highest quality raw materials available • Rubber formulations include gray butyl, natural rubber, and silicone
2-Leg Lyophilization Stoppers 3-Leg Lyophilization Stopper
3-Leg Thin Flange Lyophilization Stopper
Sleeve Style
¬ ,EG¬,YOPHILIZATION¬3TOPPER
Straight Plug Style
This all-purpose design for lyophilization applications reduces the possibility of legs sticking to each other. Cat. No.
224100-092 224100-093 224100-192 W224100-193 224100-194 224100-282 224100-503 224100-507
For Mouth ID x OD (mm)
7 x 13 7 x 13 13 x 20 13 x 20 13 x 20 20 x 28 31 x 43 31 x 43
Stopper Material
Shelf Pack
Gray Chlorobutyl-Isoprene blend/50 Gray Chlorobutyl/50 Gray Chlorobutyl-Isoprene blend/50 Gray Chlorobutyl/46 Gray Chlorobutyl/50 Gray Chlorobutyl/50 Black Halobutyl/60 Black EPDM
Qty/Case
100 100 100 100 100 100 – –
1000 1000 1000 1000 1000 1000 12 12
Snap-On Style
3TRAIGHT¬0LUG¬3TYLE This design provides maximum sealing for vials with straight wall glass finish. The straight wall interior finish is typically found in vials from European manufacturers. This style is not recommended for vials with a blow-back feature, which is a small ridge on the interior of the vial’s neck. Cat. No.
For Mouth ID x OD (mm)
224100-030 224100-070 224100-072
5 x 11 7 x 13 7 x 13
224100-170 224100-171 224100-172 224100-173 224100-174
10 x 20 13 x 20 13 x 20 13 x 20 13 x 20
,EG¬4HIN¬&LANGE¬,YOPHILIZATION¬3TOPPER
224100-175
13 x 20
This 3-leg lyophilization stopper is made from gray chlorobutyl/55 and is used with Wheaton screw neck diagnostic bottles. This stopper can be used with open top caps (240716-01 series) or closed top caps (240706-01 series). Not recommended for use with crimp top caps.
224100-177 224100-178 224100-263
13 x 20 13 x 20 19 x 28
224100-330 224100-331
15 x 30 15 x 30
,EG¬,YOPHILIZATION¬3TOPPER The 3-leg design provides stability during lyophilization and resists cocking. Cat. No.
224100-202
Cat. No.
224100-203
For Mouth ID x OD (mm)
Stopper Material
Shelf Pack
13 x 20
Gray Chlorobutyl/50
100
For Mouth ID x OD (mm)
Stopper Material
Shelf Pack
13 x 20
Gray Chlorobutyl/55
–
Qty/Case
1000
Qty/Case
300
Stopper Material
Natural Red Rubber/40 Natural Red Rubber/40 Gray Chlorobutyl-Isoprene Blend/40 Teflon® Faced Natural Red Rubber/40 Natural Pink Rubber/48 Natural Red Rubber/45 Gray Chlorobutyl/45 Gray Chlorobutyl-Isoprene Blend/40 Gray Chlorobutyl-Isoprene Blend/40 Teflon® Faced Black Viton® Silicone Gray Chlorobutyl-Isoprene Blend/40 Teflon® Faced Natural Red Rubber/40 Gray Bromobutyl/50
Shelf Pack
Qty/Case
100 100
1000 1000
100 100 100 100 100
1000 1000 1000 1000 1000
100
1000
100 – 100
1000 100 1000
– 100 100
100 1000 1000
3LEEVE¬3TYLE
3NAP /N¬3TYLE
Sleeve stoppers are plug stoppers with fold-over skirts. This type of stopper is used on serum vials and other crimp-finish containers that do not require aluminum seals or overcaps. Sleeve stoppers can be used as an injection site for multiple dose entry. These stoppers are manufactured from natural red rubber, a general-purpose rubber formulation that has excellent resealable properties, making it ideal for use in multi-puncture applications.
This design provides maximum sealing for vials with a blow-back glass finish, which is a small ridge on the interior of the vial’s neck. The snap-on stopper locks into the blow-back ridge, providing a tight seal and keeping the stopper from backing out. This style is not recommended for vials with a straight-walled finish. The blow-back feature is typically found in vials from North American manufacturers.
Cat. No.
Cat. No.
224100-020 224100-060 224100-160 224100-161 224100-320
For Mouth ID x OD (mm)
Stopper Material
Shelf Pack
5 x 11 7 x 13 10 x 20 13 x 20 15 x 30
Natural Red Rubber Natural Red Rubber Natural Red Rubber Natural Red Rubber Natural Red Rubber
100 100 100 100 100
Qty/Case
1000 1000 1000 1000 1000
224100-080 224100-081 224100-180 224100-181 224100-342
For Mouth ID x OD (mm)
7 x 13 7 x 13 13 x 20 13 x 20 15 x 30
Stopper Material
Natural Red Rubber/40 Gray Chlorobutyl/45 Natural Red Rubber/45 Gray Chlorobutyl/45 Gray Bromobutyl/50
Note: To select the proper size stopper for your serum bottle or vial, use the OD dimension of the stopper and bottle/vial. WHEATON
1.800.225.1437 (U.S. & Canada only) | +1.856.825.1100 | +1.856.825.1368 (F) | www.wheatonsci.com
Shelf Pack Qty/Case
100 100 100 100 100
1000 1000 1000 1000 1000
34
35
#APSÂŹ ÂŹ#LOSURES #RIMPINGÂŹ ÂŹ$ECAPPINGÂŹ!CCESSORIES !IR 0OWEREDÂŹ#RIMPER This lightweight, easy-to-use crimper provides lab-scale or small-productionscale performance at a moderate cost, ďŹ lling the gap between hand-operated machines and fully automatic equipment. They operate on standard laboratory air supply of 45 to 60 psi. Bottles and aluminum seals are automatically aligned to eliminate partially crimped seals. Exhaust air is passed through the foot-operated valve so the crimper can be used inside a sterile hood. A complete unit consists of a crimper, a foot valve mounted on a base plate, and connecting tubing and ďŹ ttings, all packed in a polyethylene storage case. A stand (available separately) supports the crimping jaws about 10â€? (26 cm) above the benchtop so both hands are free to manipulate the bottles. The heavy metal base has nonskid rubber feet. 1 year warranty. Dimensions (W x D x H): ..................6 ½â€? x 9â€? x 14 ½â€? (16.5 x 22.9 x 36.8 cm) Weight: ...................................................................................... 20 lb (9.1 kg) Dimensions and weight include unit plus stand.
Cat. No.
Description
224381 224382 224383 224465
Attaches 11 mm seals Attaches 13 mm seals Attaches standard 20 mm seals Stand
Qty/Case
1 1 1 1
#RIMPMASTERš #RIMPING3TATION • •
Compatible with standard hand crimpers Functions using any standard in-house air supply or compressed air cylinder
This unit enables hand-operated crimpers and decappers to function in a semi-automatic mode. It accepts most standard hand crimpers and decappers, and requires inlet air pressure of 25 to 40 psi, which may be obtained from a compressed air cylinder or your standard in-house air supply. To operate, simply insert the proper crimper or decapper for the type of seal you wish to use, and depress the foot switch. 1 year warranty.
% :#RIMPERŠ • • • •
Cushioned ergonomic handle Labeled for quick size identiďŹ cation Polished crimping jaws for consistent sealing Works with the Wheaton CrimpmasterÂŽ Crimping Station
Wheaton E-Z Crimpers™ feature cushioned ergonomic handles that aid in reducing hand fatigue and adds a high degree of comfort for the user. Each crimper size is labeled for quick identiďŹ cation. Other features include polished crimping jaws for consistent sealing, a short handle and redesigned spring assembly that further aids in reducing hand fatigue. For semi-automatic crimping, use the E-Z Crimper with the Wheaton CrimpmasterÂŽ Crimping Station. An adjustable stop allows you to determine the tightness of the seal while maintaining consistent crimping. Tapered jaws provide for easier vial access when using racks. E-Z Crimpers™ can be autoclaved at 121°C. Autoclaving may change the appearance and or reduce product life. 2 year warranty. Cat. No.
Description
W225300 W225301* W225302 W225303
Attaches 8 mm Seals Attaches 11 mm Seals Attaches 13 mm Seals Attaches 20 mm Seals
Qty/Case
1 1 1 1
*The 11 mm E-Z Crimper is supplied with a plunger insert to give the option of crimping the top of a vial creating an extra tight seal. We recommend this only for standard opening vials.
Dimensions (H x D x W): ................ 19 3/4� x 6� x 8-5/8� (50.2 x 15.2 x 22 cm) Weight: ..................................................................................... 13 lb (5.9 kg)
#RIMPER $ECAPPER
The CrimpmasterÂŽ permits setup in 5 easy steps:
These crimpers are used for ip cap seals and for aluminum seals sizes 16.5, 28.5, and 30 mm. 1 year warranty.
1. Attach a piece of 1/4� ID high pressure tubing (not supplied) from the CrimpmasterŽ foot switch assembly to an adjustable air pressure supply.
Cat. No.
Description
224322 224321 224323 224316 224307 224357
Crimper, attaches 13 mm Flip Cap Seals Crimper, attaches 16.5 mm Seals Crimper, attaches 20 mm Flip Cap Seals Crimper, attaches 28.5 mm Uni-Dose™ Seals Crimper, attaches 30 mm Seals Decapper, removes 30 mm Seals
2. Connect supplied tubing to CrimpmasterŽ and foot switch assembly, and place assembly on oor. 3. Remove cushioned grips, adjustable stop screw, and handle retainer from the crimper or decapper (if so equipped). 4. Depress the handles and slide the crimper or decapper into the CrimpmasterŽ 5. Adjust the air pressure (25-40 psi) for the desired crimping tightness. Cat. No.
Description
224550
Crimpmaster Crimping Station
WHEATON
Qty/Case
1
1.800.225.1437 (U.S. & Canada only) | +1.856.825.1100 | +1.856.825.1368 (F) | www.wheatonsci.com
Qty/Case
1 1 1 1 1 1
#APSÂŹ ÂŹ#LOSURES
36
% :$ECAPPERŠ
0LIERÂŹ$ECAPPERÂŹ
• Cushioned ergonomic handle • Labeled for quick identiďŹ cation • Works with the Wheaton CrimpmasterÂŽ Crimping Station
Plier Decappers are an inexpensive and easy way to remove seals. They are made of steel with gray plastic-coated handles. To remove a seal, simply secure the seal between the jaws, squeeze the handles and twist the seal. 1 year warranty.
Wheaton E-Z Decappers™ feature a cushioned ergonomic handle that aids in reducing hand fatigue and adds a high degree of comfort for the user. Each decapper size is labeled for quick identiďŹ cation. These durable, lightweight, handoperated decappers are an economical way to remove seals quickly and easily. To remove a seal, just place the decapper on the seal and squeeze the handles together. For semi-automatic decapping, use the E-Z Decapper with the Wheaton CrimpmasterÂŽ Crimping Station. Tapered jaws provide for easier vial access when using racks. E-Z Decappers can be autoclaved at 121°C. Autoclaving may change the appearance and or reduce product life. 2 year warranty. Cat. No.
Description
W225350 W225351 W225352 W225353
Decapper, 8 mm Decapper, 11 mm Decapper, 13 mm Decapper, 20 mm
Cat. No.
Description
224372 224373
Removes 13 mm Seals Removes 20 mm seals
Qty/Case
1 1 1 1
7HEATONÂŹISÂŹ9OURÂŹ3INGLEÂŹ3OURCEÂŹFORÂŹ,YOPHILIZATIONÂŹ0RODUCTS ÂŹÂŹ See our new Lyophilization Section on pages 107-110. WHEATON
1.800.225.1437 (U.S. & Canada only) | +1.856.825.1100 | +1.856.825.1368 (F) | www.wheatonsci.com
Qty/Case
1 1
37
#APS¬ ¬#LOSURES 3CREW¬#APS "LACK¬0HENOLIC¬3CREW¬#AP¬ • With 14B rubber liner • Autoclavable
These caps have a nontoxic white styrene-butadiene rubber liner, making them ideal for culture work. The Convenience Packs offer caps in smaller quantities. Cat. No.
Cap Size
Qty /Pack
Qty/Case
240206 240208 240209 240215 240264 240216 240218 240278 240280 240223 240269 240281 240228
8-425 13-425 15-425 18-400 18-415 20-400 24-400 24-430 33-430 38-400 38-415 38-430 51-400
— — — — — — — — — — — — —
1000 200 200 500 500 500 500 500 200 200 200 200 100
20-400 22-400 24-400 28-400 33-400 38-400 43-400 48-400 58-400
72 72 72 72 72 72 72 72 72
144 144 144 144 144 72 72 72 72
• With PE Poly-Seal® liner Cat. No.
Cap Size
Qty/Pack
239249 239250 239251 239253 239255 239257 239259 240119 239260 240121 240181
13-425 15-425 18-400 20-400 22-400 24-400 28-400 28-400 33-400 33-400 38-430
72 72 72 72 72 72 72 — 72 — —
Qty/Case
144 144 144 144 144 144 144 100 144 100 100
13-425 15-425 18-400 20-400 22-400 28-400 33-400
— — — — — — —
13,000 10,000 6,500 5,500 4,700 3,100 2,300
Bulk
Convenience Packs W239298 W239299 W239300 W239301 W239302 W239303 W239304 W239306 W239308
"LACK¬0HENOLIC¬3CREW¬#AP
"LACK¬0HENOLIC¬3CREW¬#AP¬
"LACK¬0HENOLIC¬3CREW¬#AP¬
• With aluminum foil faced pulp board liner • Use these caps with organic solvents
• With Teflon® faced (14B) styrene-butadiene rubber liner • Autoclavable
These caps are designed to ensure the ultimate in product safety. The liners are white rubber faced with Teflon. Cat. No.
Cap Size
Qty/Pack
W240406 240408 W240820 W240821 240463 240409 W240822 W240823 240414 240415 240416 W240824 W240825 240418 W240827 W242711 240419 240421 240480 240481
8-425 13-425 13-425 13-425 15-415 15-425 15-425 15-425 18-415 18-400 20-400 22-400 22-400 24-400 24-400 24-400 28-400 33-400 33-430 38-430
— — — 250 — — — 250 — — — — 100 — 100 — — — — —
WHEATON
239449 239450 239451 239453 239455 239459 239460
Qty/Case
200 200 250 1000 200 200 250 1000 200 200 100 100 500 100 500 200 100 100 100 100
Cat. No.
Cap Size
Qty Case
240319 240321 240381 W240382 240330
28-400 33-400 38-430 38-439 58-400
100 100 200 200 200
"LACK¬0HENOLIC¬3CREW¬#AP¬ • With polyethylene (LDPE) liner • Use these caps with distilled water, analytical standards and reagents Cat. No.
Cap Size
Qty/Case
240080 240081
33-430 38-430
200 200
1.800.225.1437 (U.S. & Canada only) | +1.856.825.1100 | +1.856.825.1368 (F) | www.wheatonsci.com
#APS¬ ¬#LOSURES
"LACK¬0HENOLIC¬/PEN¬4OP¬#AP¬
3EPTA¬FOR¬/PEN¬4OP¬#APS
• With Gray Chlorobutyl/50 Septa and Flange • Autoclavable
• Autoclavable
Ideal for use with Wheaton Media Bottles (Catalog No. 219 series, pages 12-13)
Cat. No.
Cat. No.
Cap Size
Qty/Case
Locking Flange Septa
240680 240683
33-430 33-430
100 1000
"LACK¬0HENOLIC¬3CREW¬#AP¬ • Without Liner • Autoclavable
Ideal for use with *Vacules® (Catalog No. 651905 and 651907). Cat. No.
Cap Size
Qty Case
239853
22-350
500
For Cap Size (mm)
240563
Material
Qty/Case
33
Chlorobutyl/50
100
8 8 13 13 15 15 15 18 20 20 22 24 24 24 33 45
Red Teflon® Faced Silicone Teflon® Faced Silicone Teflon® Faced Silicone Teflon® Faced Butadiene Silicone Teflon® Faced Silicone Teflon® Faced Natural Red Rubber Teflon® Faced Silicone Teflon® Faced Natural Red Rubber Teflon® Faced Silicone Teflon® Faced Silicone Teflon® Faced Silicone Teflon® Faced Silicone 10/90 Teflon®/Silicone/Teflon® Teflon® Faced Silicone Teflon® Faced Silicone for Celstir® Sidearm Cap
100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100
Plain Septa W240580 W240581 W240583 W240593 W240574 W240584 W240594 W240585 W240596 W240586 W240587 W240588 W240598 W240599 W240590 I052665
*Vacules are listed in the vial section on page 154.
"LACK¬0HENOLIC¬/PEN¬4OP¬3CREW¬#AP
,IQUID¬3CINTILLATION¬6IAL¬3CREW¬#APS
• Without Liner • Autoclavable
Cat. No.
Cap Size (mm)
Cap Material
Cap Liner Material
Qty/Case
241009 240804 241017 240817 240917 241317 240805 241018 240818
15-425 22-400 22-400 22-400 22-400 22-400 24-400 24-400 24-400
Urea Polypropylene Urea Urea Urea Polyethylene Polypropylene Urea Urea
Metal Foil Metal Foil Metal Foil Polyethylene Disc Poly Seal Cone Linerless Metal Foil Metal Foil Polyethylene Disc
1000 1000 1000 1000 1000 1000 1000 1000 1000
Cat. No.
Cap Size
Qty/Case
W240506 W240507* W240508 W240509 W240515 W240516 W240517 W240518 W240540
8-425 8-425 13-425 15-425 18-400 20-400 22-400 24-400 33-430
200 200 200 200 200 200 200 200 200
*This has a thicker cap wall designed for Shimadzu and other autosamplers.
For a comprehensive listing of liquid scintillation vials see pages 146-148.
WHEATON
1.800.225.1437 (U.S. & Canada only) | +1.856.825.1100 | +1.856.825.1368 (F) | www.wheatonsci.com
38
#APS¬ ¬#LOSURES
39
-ICROLINK ¬7HITE¬¬ #LOSED¬4OP¬#AP¬
-ICROLINK ¬3CREW¬#APSx¬¬ 4HE¬!UTOCLAVABLE¬#LOSURE
• With Polypropylene/Silicone/ Polypropylene Liner
These white, closed top, autoclavable caps have ultrasonically bonded liners, making them ideal for use with biological media and other sensitive compounds. They are available in convenient Lab Pack quantities as well as larger Case Packs. Cat. No.
Cap Size
Qty/Case
20-400 24-400 28-400 38-400 38-430
48 48 48 24 24
20-400 28-400 38-430
600 480 240
Lab Pack 240230-01 240231-01 240232-01 240234-01 240235-01
Case Pack 240230 240232 240235
-ICRO,INK ¬3CREW¬#AP¬,INERS Cap liners are ultrasonically welded to cap interiors – eliminating the risk of adhesive contamination and bond failure common with autoclaving. • • • • • •
-ICROLINK ¬7HITE¬¬ #LOSED¬4OP¬#AP¬
Autoclavable Solvent free – no glue Excellent chemical resistance Excellent seal and resealability Excellent puncture life Low compression set
• With Polypropylene/Silicone/Teflon® Liner
These polypropylene caps are ideal for use with biological media, volatile solvents, corrosive chemicals, and sensitive compounds. Each Microlink® closure consists of a liner ultrasonically welded into the polypropylene cap. The liner consists of a layer of polypropylene (used for welding to the polypropylene of the cap), a layer of silicone rubber (used for taking up imperfections on the vial surface), and then a layer of Teflon® or polypropylene as the sealing surface. This welded bond provides a superior closure system, maintaining a seal through multiple cleaning and/or autoclaving operations. The use of a lowcompression-set silicone is ideal for the storage of samples and sensitive materials for prolonged periods of time over wide temperature ranges. Teflon® or polypropylene film on the exposed face of the liner imparts an inert, highly chemical-resistant surface ideal for the containment and storage of volatile solvents, sensitive compounds and corrosive chemicals.
-ICROLINK ¬"LACK¬¬ /PEN¬4OP¬#AP
These white, closed top, autoclavable caps have ultrasonically bonded liners, making them ideal for storage and containment of volatile solvents, sensitive compounds, and corrosive chemicals. They are available in convenient Lab Pack quantities as well as larger Case Packs. Cat. No.
240250-01 240251-01 240252-01 240255-01 240256-01
Cap Size
Qty/Case
33-430 38-430
50 50
-ICROLINK ¬"LACK¬¬ #LOSED¬4OP¬#AP¬¬
240250 240251 240252 240256
48 48 48 24 24
20-400 24-400 28-400 38-430
600 600 480 240
-ICROLINK ¬7HITE¬¬ /PEN¬4OP¬#AP¬ • With Polypropylene/Silicone/Teflon® Liner
These white, open top, autoclavable caps have ultrasonically bonded liners, making them ideal for storage and containment of volatile solvents, sensitive compounds, and corrosive chemicals. They are available in convenient Lab Pack quantities as well as larger Case Packs. Cat. No.
Cap Size
Qty/Case
28-400 33-400 33-430 38-430
48 24 24 24
33-400 33-430 38-430
240 240 240
Lab Pack
• With Polypropylene/Silicone Liner
Use this black, closed top, autoclavable cap with biological media and test reagents. It comes with an ultrasonically bonded liner. Cat. No.
Cap Size
Qty/Case
240106
33-430
50
WHEATON
20-400 24-400 28-400 38-400 38-430
Case Pack
These black, open top, autoclavable caps are ideal for storage and containment of volatile solvents, sensitive compounds, and corrosive chemicals. The liner is ultrasonically welded to the cap, eliminating the possibility of glue contamination. 240112 240114
Qty/Case
Lab Pack
• With Polypropylene/Silicone/Teflon® Liner
Cat. No.
Cap Size
240240-01 240241-01 240242-01 240243-01
Case Pack 240241 240242 240243
1.800.225.1437 (U.S. & Canada only) | +1.856.825.1100 | +1.856.825.1368 (F) | www.wheatonsci.com
#APS¬ ¬#LOSURES Cat. No.
Cap Size
Qty/Pack
®
With Teflon Faced Foamed Polyethylene Liner
0OLYPROPYLENE¬3CREW¬#APS Use these caps with Wheaton or other manufacturers' glass bottles. Cat. No.
Cap Size
Qty/Pack
Qty/Case
13-425 15-425 18-400 20-400 22-400 24-400 28-400 33-400 38-400 43-400 45-400 48-400 53-400 58-400 63-400 70-400 83-400 89-400
72 72 72 72 72 72 72 72 72 72 72 72 72 72 24 24 24 24
144 144 144 144 144 144 144 144 72 72 72 72 72 72 48 48 48 48
— — — — — — — — — — — — — — —
19,000 5,000 9,500 7,000 5,500 3,500 3,750 2,200 1,750 2,250 2,000 1,650 1,125 500 500
72 72 72 72 72 72 72 72 72 72 72 72 72 72 24 24 24 24
144 144 144 144 144 144 144 144 72 72 72 72 72 72 48 48 48 48
With Poly-Vinyl Liner 239201 239202 239203 239205 239207 239209 239211 239212 239213 239214 239215 239216 239217 239218 239219 239220 239221 239222
With Poly-Vinyl Liner Bulk 239401 239402 239403 239407 239409 239412 239413 239414 239415 239416 239417 239418 239420 239421 239422
13-425 15-425 18-400 22-400 24-400 33-400 38-400 43-400 45-400 48-400 53-400 58-400 70-400 83-400 89-400
With Teflon® Faced Foamed Polyethylene Liner 239225 239226 239227 239229 239231 239233 239235 239236 239237 239238 239239 239240 239241 239242 239243 239244 239245 239246
13-425 15-425 18-400 20-400 22-400 24-400 28-400 33-400 38-400 43-400 45-400 48-400 53-400 58-400 63-400 70-400 83-400 89-400
WHEATON
239425 239426 239427 239429 239431 239433 239435 239437 239438 239439 239440 239442 239443 239444 239445 239446
13-425 15-425 18-400 20-400 22-400 24-400 28-400 38-400 43-400 45-400 48-400 58-400 63-400 70-400 83-400 89-400
Bulk
Qty/Case
— — — — — — — — — — — — — — — —
19,000 5,000 9,500 8,200 7,000 5,500 4,500 3,500 3,000 2,750 2,250 1,650 1,250 1,125 550 450
72 72 72 72 72 72 72 72 72 72 72 72 72 72 24 24 24 24
144 144 144 144 144 144 144 144 72 72 72 72 72 72 48 48 48 48
— — — — — — — — — — — —
200 200 200 200 200 200 200 200 200 200 200 200
— — — — — — — — — — — — — — —
19,000 5,000 9,500 8,200 7,000 5,500 4,500 3,500 3,750 3,000 1,650 900 1,000 550 500
With Foamed Polyethylene Liner 239273 239274 239275 239277 239279 239281 239283 239284 239285 239286 239287 239288 239289 239290 239291 239292 239293 239294
13-425 15-425 18-400 20-400 22-400 24-400 28-400 33-400 38-400 43-400 45-400 48-400 53-400 58-400 63-400 70-400 83-400 89-400
With Foamed Polyethylene Liner 242210 242212 242214 242216 242217 242218 242220 242222 242224 242225 242226 242228
15-415 18-400 18-415 20-400 20-410 22-400 24-400 24-410 28-400 28-410 33-400 33-430
With Foamed Polyethylene Liner 239473 239474 239475 239477 239479 239481 239483 239484 239485 239486 239490 239491 239492 239493 239494
13-425 15-425 18-400 20-400 22-400 24-400 28-400 33-400 38-400 43-400 58-400 63-400 70-400 83-400 89-400
Bulk
1.800.225.1437 (U.S. & Canada only) | +1.856.825.1100 | +1.856.825.1368 (F) | www.wheatonsci.com
40
41
#APS¬ ¬#LOSURES
Black Phenolic Screw Cap
Polypropylene Screw Cap
Polypropylene Open Top Screw Cap
3CREW¬#APS¬FOR¬% :¬%X 4RACTION ¬6IALS "LACK¬0HENOLIC¬3CREW¬#AP¬WITH¬4EmON ¬&ACED¬ "¬2UBBER¬,INER These autoclavable caps are designed to ensure the ultimate in product safety. The liners are made of a nontoxic white styrene-butadiene rubber and are faced with Teflon®, which offers excellent chemical resistance. Cat. No.
Cap Size
Qty/Pack
W240820 W240821 W240822 W240823 W240824 W240825 240418 W240827
13-425 13-425 15-425 15-425 22-400 22-400 24-400 24-400
— 250 — 250 — 100 — 100
Qty/Case
250 1000 250 1000 100 500 100 500
00¬3CREW¬#AP¬WITH¬"ONDED¬4EmON ¬&ACED¬3ILICONE¬,INER These white polypropylene autoclavable caps have a bonded Teflon® faced silicone liner making them ideal for storage and containment of volatile solvents, sensitive compounds, and corrosive chemicals. The liners consist of 0.055" (1.4 mm) of silicone and 0.005" (0.14 mm) of Teflon®. Cat. No.
Cap Size
Qty/Pack
W240830 W240831 W240832 W240833 W240834 W240835 W240836 W240837
13-425 13-425 15-425 15-425 22-400 22-400 24-400 24-400
— 250 — 250 — 100 — 100
Qty/Case
250 1000 250 1000 100 500 100 500
00¬/PEN¬4OP¬3CREW¬#AP¬WITH¬"ONDED¬4EmON ¬&ACE¬3ILICONE¬,INER These polypropylene autoclavable open top caps have a bonded Teflon® faced silicone liner making them ideal for storage and retrieval of volatile solvents, sensitive compounds and corrosive chemicals. The liners consist of 0.055" (1.4 mm) of silicone and 0.005" (0.14 mm) of Teflon®. Cat. No.
Cap Size
Color
Qty/Pack
W242710 W240840 W240841 W240842 W240843 W240844 W240845 W240846 W240847
13-425 13-425 13-425 15-425 15-425 22-400 22-400 24-400 24-400
Black White White White White White White White White
— — 250 — 250 — 100 — 100
Screw Cap, Polypropylene Pour Ring & Lyophilization Stopper
0OLYPROPYLENE¬3CREW¬#AP¬AND¬0OUR¬2ING¬ • • • • •
Replacement caps for Lab 45™ media bottles 45 mm screw thread Inner sealing ring Available with liner and center hole Autoclavable
These 45 mm non-reactive, autoclavable caps have sure-grips for easy handling. Use these caps with the Wheaton Lab 45™ media bottles or with other media bottles having a 45 mm screw thread finish. Caps with the inner sealing ring provide a leak-resistant seal. Caps without the sealing ring can be used with the 224100-503 stopper for lyophilization applications. The liner in the Teflon® faced silicone lined cap is ultrasonically bonded to eliminate toxicity and to ensure product safety. The cap with the open top can be accessible with a syringe and can also be used with a 43 mm stopper. Use the snap-on pour ring with polypropylene caps to eliminate dripping of bottle contents while pouring. The ring is manufactured from autoclavable non-reactive polypropylene and is easily snapped onto any Lab 45™ media bottle with a pour lip. Cat. No.
Description
240726 240726-03 240726-04 240736 240740 240746 240756 224100-503 224100-507
White Cap with Inner Sealing Ring Red Cap with Inner Sealing Ring Blue Cap with Inner Sealing Ring White Cap without Inner Sealing Ring White Cap with Teflon® Faced Silicone Liner White Cap with Center Hole Polypropylene Pour Ring 31 x 43 mm Black Halobutyl/60 Stopper 31 x 43 mm Black EPDM Stopper
Cap Size
45 45 45 45 45 45 45 — —
Qty/Case
12 12 12 12 12 12 12 12 12
Qty/Case
250 250 1000 250 1000 100 500 100 500
The New E-Z Ex-Traction Vial provides benefits to users of automated or manual handling and storage systems. See page 143 for more details.
PBT Screw Cap
ETFE Pour Ring
0OLYBUTYLENE¬4EREPHTHALATE¬3CREW¬#AP • • • •
With Teflon® faced silicone liner 45 mm screw thread Withstands temperatures up to 200°C Autoclavable
PBT screw caps have high heat resistance and can withstand temperatures up to 200°C for short periods of time. Autoclavable.
'LASS¬&ILLED¬00¬3CREW¬#AP • Open top polypropylene glass-filled cap • Provides greater heat resistance than other PP caps • Teflon®/silicone septa bonded to cap • Ideal for EPA samples
The polypropylene is glass-filled to provide extra chemical and heat resistance compared to standard polypropylene. The .005” Teflon®/ 0.120” Silicone septa is bonded to the cap, providing a permanent connection that is ideal for repeat injections. 24-400 screw cap size fits Wheaton 20, 25, 40, and 60 mL sample vials. Cat. No.
Description
Cap Size
Qty/Pack
W224600
With Bonded Teflon®/Silicone Septa
24-400
100
WHEATON
Use the ethylene-tetrafluorethylene (ETFE) pour ring with a red PBT screw cap. It withstands temperatures up to 200°C and fits any Wheaton bottle with a 45 mm screw thread finish. Autoclavable. Cat. No.
Description
Cap Size
Qty/Case
240750 240760
PBT Screw Cap ETFE Pour Ring
45 mm —
10 10
For bottles that fit with a 45 mm screw cap see page 13.
Qty/Case
200
1.800.225.1437 (U.S. & Canada only) | +1.856.825.1100 | +1.856.825.1368 (F) | www.wheatonsci.com
#APS¬ ¬#LOSURES
0OLYPROYLENE¬3CREW¬#AP ¬,INERLESS • • • •
0OLYPROYLENE¬3CREW¬#AP¬
Colored caps Use these caps with Wheaton Leak Resistant Narrow Mouth Bottles Available in natural, white, red, blue, and green See Leak Resistant Bottles on page 29
Cat. No.
Qty/Case
Qty/Pack
Natural White Red Blue Green
12 12 12 12 12
72 72 72 72 72
Solid Top Screw Caps
Natural White Red Blue Green
12 12 12 12 12
72 72 72 72 72
Open-Top Screw Caps
Natural White Red Blue Green
12 12 12 12 12
72 72 72 72 72
Thin-Flange Lyophilization Stopper
Natural White Red Blue Green
12 12 12 12 12
48 48 48 48 48
Natural White Red Blue Green
12 12 12 12 12
72 72 72 72 72
Cat. No.
20-410 Screw Thread 239506 239506-02 239506-03 239506-04 239506-06
24-410 Screw Thread 239510 239510-02 239510-03 239510-04 239510-06
Unlined for use with *Wheaton Glass Diagnostic Bottles Solid or open top screw caps Use with thin-flange lyophilization stoppers sold separately Five colors available
Cap Color
13-425 Screw Thread 239501 239501-02 239501-03 239501-04 239501-06
• • • •
240706-01 240706-02 240706-03 240706-04 240706-05 240716-01 240716-02 240716-03 240716-04 240716-05 224100-203
Color
Cap Size
Qty/Case
Black White Red Blue Yellow
20-400 20-400 20-400 20-400 20-400
300 300 300 300 300
Black White Red Blue Yellow
20-400 20-400 20-400 20-400 20-400
300 300 300 300 300
20 mm
300
Gray
* See page 18 for Wheaton Glass Diagnostic Bottles
28-410 Screw Thread 239512 239512-02 239512-03 239512-04 239512-06
38-430 Screw Thread 239516 239516-02 239516-03 239516-04 239516-06
) ,OC©¬#LOSURE¬ • Polypropylene closures with gray bromobutyl/50 stoppers • For use with Diagnostic Bottles • Eliminates use of separate aluminum seal and rubber stopper
Use these with Wheaton glass diagnostic bottles catalog number series 219360 through 219374 (page 18). These closures are specifically designed for diagnostic applications, and offer all the advantages of an aluminum seal and stopper with the convenience of a screw cap. The unique combination of a stopper and screw cap ensures excellent sealing characteristics, making them ideal for liquid reagents. You can access sample contents using a syringe through the stopper or with a pipette after removing the screw cap. The polypropylene closures are available in black, white, red, blue, and yellow. Tolerances in the stoppers are maintained to +/-.010". Both caps and stoppers are autoclavable. Cat. No.
Color
Cap Size
Qty/Case
240676-01 240676-02 240676-03 240676-04 240676-05
Black White Red Blue Yellow
20-400 20-400 20-400 20-400 20-400
100 100 100 100 100
WHEATON
3NAP¬#AP¬ • Use these caps with Wheaton Snap-Cap sample bottles (page 20). • All sizes have tabs for easy removal • Natural low density polyethylene Cat. No.
Cap Size (mm)
242612 242615 242616 242619
22 30 34 45
Qty/Case
200 200 200 200
6ENTED¬3CREW¬#AP ¬ ¬MM • Sterile polypropylene cap with 0.2 micron hydrophobic filter • Ideal for use with glass spinner flasks or roller bottles with 45 mm screw thread • Individually wrapped
This vented cap is a single use 45 mm finish cap that is pierced, and the opening is covered with a hydrophobic filter to allow a flask or bottle to “breathe” while eliminating bacterial contamination from this venting. The product allows gas exchange while preventing liquid, water or contaminants from passing through the filter. Cap cannot be autoclaved. Cat. No.
Description
Qty/Case
W240751 W240752
Vented Cap Vented Cap
4 12
1.800.225.1437 (U.S. & Canada only) | +1.856.825.1100 | +1.856.825.1368 (F) | www.wheatonsci.com
42
#ELL¬#ULTURE
43
0ROVEN¬4OOLS¬FOR¬#ELL¬#ULTURE 0RIMARY¬#ELL¬0REPARATION
3USPENSION¬#ELL¬0RODUCTION
Wheaton Science Products supplies tools to prepare single cells from tissues to large-scale production of cells in stirred vessels.
Wheaton Science Products offers large scale cell production systems for the culture of mammalian or insect cells. Maximum control of pH, dissolved oxygen, temperature, agitation and antifoam is provided by these bench-top systems. Unlike common tissue culture flasks, which cannot provide total environmental control, Wheaton cell production systems maximize conditions on the bench without the need for an incubator.
Typically, cellular tissue is derived from sources such as an egg, embryo, animal organ such as a spleen, or plant tissue. Wheaton tissue grinders (pages 43-46) reduce excised tissue to primary cells, as well as prepare subcellular components from harvested cell packs. The goal is to create and establish primary cell lines which can be used for production and/or ultimately become a master and/or working cell bank. Wheaton Tissue grinders are also used to recover proteins, DNA and RNA for blots and other procedures. Wheaton trypsinizing flasks (page 50) are used to further reduce tissue to cellular components. Place tissue in flask, add trypsin and stir the vessel using the Wheaton Micro-Stir® magnetic stirrer (page 53). The deep-fluted flask design adds turbulence; a dam below the sidearm retains un-trypsinized tissue when decanting. Dissociated cells can then be collected. Trypsinizing flasks are also useful when removing cells from microcarrier beads. Single cells can then be used to start a seed culture in a flask or multiple flasks. After reaching a specific density, inoculate a suspension culture flask (pages 51-52) or roller bottle (page 15) for high volume cell production.
¬
The Cell Optimizer System® (page 54) is a small volume cell culture reactor which incorporates sophisticated control technologies typically found in large production culture systems. The Cell Optimizer System allows determination of cell growth and optimum production conditions prior to large scale culture. Operating parameters can be fine-tuned rapidly in several vessels when working at a scale from 250 milliliters to 3 liters. The Overdrive™ culture system vessels hold up to 45 liters and provide production at a lower cost (page 56). This system is versatile for suspension or microcarrier cultures and can be combined with controllers and probes. The Mini-Pilot Plant™ bioreactor provides total environmental control with 10,19 or 45 liter vessels operating on the bench-top. Incubators are eliminated with the innovative heating blanket. Probes, pumps, controllers and optional computer interface are available. Large scale cell production is afforded at a fraction of the cost of comparable bioreactor systems.
!NCHORAGE¬$EPENDENT¬#ELL¬ 0RODUCTION In culture, anchorage dependent cells want to be attached to a surface wall of a culture vessel or microcarrier beads suspended in culture media. Motionless methods of monolayer cell culture usually consist of T flasks which lay flat. Cells will grow on the inside flask surface only where the media covers them. Since adherent cells usually demonstrate contact inhibition, cell growth is restricted to the amount of contact surface area of the flask. This severely limits the static method being used for large scale production of cells. As an alternative to T flasks, Wheaton Science Products offers various roller apparatus (pages 58-63) and options to allow for maximum flexibility. This allows the entire surface of a roller bottle to be used to grow monolayer cells without filling the entire bottle with expensive media. Using the Wheaton Roller Apparatus, increases surface area which equals larger cell yields, which in turn, decrease production costs.
4ISSUE¬'RINDERS Wheaton Tissue Grinders enable primary cells to be prepared from excised tissues, as well as subcellular components from harvested cell packs. Tissue grinders are used to extract DNA, RNA and proteins for blots or other procedures. They are also used to enhance recovery of other cell products. Capacities on the grinders range from 0.1 mL to 55 mL. There are a variety of grinders to suit many tissue types. Tapered Tissue Grinders are ideal for connective tissue including heart, muscle and lung. These glass-on-glass grinders feature a long taper design that maximizes grinding efficiency. Potter-Elvehjem Tissue Grinders incorporates a serrated pestle design to disperse homogenate into the mortar cylinder. Standard units with Teflon® pestles are well suited for soft tissue, such as brain and liver. Tenbroeck Tissue Grinders have a hollow handle that allows packing with ice, making them suitable for tissue such as liver, intestines and heart. Dounce Tissue Grinders are supplied with two types of pestles: a loose-fitting pestle for sample reduction and a second, tighter pestle for complete homogenization. The ball-shaped pestles leave cell nuclei intact in soft tissues. The Wheaton Micro Tissue Grinder Kit offers a complete selection of micro tissue grinders. All Wheaton tissue grinders are manufactured from Wheaton 33 low extractable borosilicate glass that conforms to USP Type I and ASTM E-438 Type I, Class A requirements and replacement parts can be purchased separately. WHEATON
$OUNCE¬4ISSUE¬'RINDER • • • •
Ideal for soft tissue Provided with loose and tight pestle Wheaton 33 low extractable borosilicate glass Autoclavable
This tissue grinder is designed to retain a high percentage of cell nuclei and mitochondria in soft tissues or from cell cultures. In operation, the pestle ball is encircled in liquid, which avoids heat buildup by reducing friction. This grinder is ideal for enzyme studies. The initial grinding is performed using the “loose” pestle. The grinding process is completed using the “tight” pestle. This grinder is used by moving the pestle up and down, and works best with cell suspensions or very soft tissue. The mortar has a large reservoir and pouring lip and is supplied with a “loose” pestle and a “tight” pestle. Two complete sets per case. Tight Pestle “A” Specification: 0.0010-0.0030 in (0.025 - 0.076 mm) Loose Pestle “B” Specification: 0.0035-0.0055 in (0.089 - 0.14 mm) Cat. No.
Size (mL)
Mortar, OD x Length (mm)
Overall Length (mm)
357538 357542 357544 357546
1 7 15 40
11 x 48 13 x 82 22 x 94 32 x 140
125 175 210 285
1.800.225.1437 (U.S. & Canada only) | +1.856.825.1100 | +1.856.825.1368 (F) | www.wheatonsci.com
Qty/Case
2 2 2 2
#ELL¬#ULTURE
44
¬ 0OTTER %LVEHJEM¬¬ 4ISSUE¬'RINDER¬¬ 2EPLACEMENT¬0ARTS
$OUNCE¬$URA 'RIND ¬4ISSUE¬'RINDER • • • •
Rugged alternative to glass Dounce Tissue Grinder Precision machined from No. 316 stainless steel Mortar and pestle provided as a matched set Not autoclavable
Cat. No.
Description
358028 358033 358038 358043 358048 358053 358026 358031 358036 358041 358046 358051
2 mL Mortar Only 5 mL Mortar Only 10 mL Mortar Only 15 mL Mortar Only 30 mL Mortar Only 55 mL Mortar Only 2 mL Pestle Only 5 mL Pestle Only 10 mL Pestle Only 15 mL Pestle Only 30 mL Pestle Only 55 mL Pestle Only
Qty/Case
2 2 2 2 2 2 2 2 2 2 2 2
Wheaton Dura-Grind® Stainless Steel Dounce Tissue Grinders provide a rugged alternative to glass Dounce tissue grinders. Smooth pestle action requires less effort than glass tissue grinders. This unit is precision-machined of No. 316 stainless steel to exacting tolerance of .0005 in. (0.013mm). The mortar has a flat bottom allowing it to stand upright. Single pestle and mortar are supplied as a matched set; they are not autoclavable. Weight: 2 lb (0.9 kg) Cat. No.
Size (mL)
Mortar, OD x Length (mm)
Overall Length (mm)
357572 357574 357576
7 15 40
35 x 114 35 x 114 44 x 114
171 171 171
Qty/Case
1 1 1
0OTTER %LVEHJEM¬3AFE 'RIND ¬4ISSUE¬'RINDER¬ • • • • •
Wheaton Safe-Grind plastic coated tissue grinders afford an added measure of safety over uncoated glass tissue grinders. The heavy plastisol coating protects the mortar from becoming scratched or checked, and assures you of a sure grip. More importantly, the plastic coating creates a greater safety factor in case the mortar cracks or breaks during power homogenization. The transparent coating allows an unobstructed view of the homogenate during grinding. Wheaton SafeGrind tissue grinders are fully autoclavable. Grinding chamber clearance is .004” to .006” (0.1 - 0.15 mm). Diameter of the stainless steel shaft is 0.25” (6.3 mm).
0OTTER %LVEHJEM¬4ISSUE¬'RINDER • • • • •
Ideal for tissue homogenates Use with power homogenization Parts interchangeable Teflon® Pestle Autoclavable
These grinders are precisely constructed with completely interchangeable parts to allow easier cleaning or replacement of damaged mortars. They are designed for use in preparation of tissue homogenates and other similar applications. The Teflon® pestle is for soft tissue such as brain or liver. The stainless steel rod is 0.25” (6.3 mm) in diameter. The grinding chamber clearance is .004” to .006” (0.1 to 0.15 mm). This unit is autoclavable and can be used for power homogenization as with our overhead stirrer. However, we strongly recommend the use of safety-coated tissue grinders (see 358003 series) for added safety. This unit is manufactured from Wheaton 33 low extractable borosilicate glass that conforms to USP Type I and ASTM E-438 Type I, Class A requirements. Cat. No.
Size (mL)
Mortar, OD x Length (mm)
Overall Length (mm)
358029 358034 358039 358044 358049 358054
2 5 10 15 30 55
11 x 45 13 x 66 16 x 74 19 x 84 24 x 118 30 x 130
203 219 219 219 266 266
¬
Exterior plastic coated glass mortar provide greater safety Ideal for tissue homogenates Mortar made from Wheaton 33 low extractable borosilicate glass PTFE pestle with stainless steel shaft can be used with power homogenization Autoclavable
Qty/Case
2 2 2 2 2 2
Cat. No.
Size (mL)
Mortar, OD x Length (mm)
Overall Length (mm)
358003 358005 358007 358009 358011 358013
2 5 10 15 30 55
11 x 45 13 x 66 16 x 74 19 x 84 24 x 118 30 x 130
203 219 219 219 266 266
Qty/Case
2 2 2 2 2 2
2EPLACEMENT¬0ARTS Cat. No.
Description
358004 358006 358008 358010 358012 358014 358026 358031 358036 358041 358046 358051
2 mL Mortar Only 5 mL Mortar Only 10 mL Mortar Only 15 mL Mortar Only 30 mL Mortar Only 55 mL Mortar Only 2 mL Pestle Only 5 mL Pestle Only 10 mL Pestle Only 15 mL Pestle Only 30 mL Pestle Only 55 mL Pestle Only
Qty/Case
For a power homogenizer, see the Wheaton Overhead Stirrer on page 47.
WHEATON
1.800.225.1437 (U.S. & Canada only) | +1.856.825.1100 | +1.856.825.1368 (F) | www.wheatonsci.com
2 2 2 2 2 2 2 2 2 2 2 2
#ELL¬#ULTURE
45
4APERED¬4ISSUE¬'RINDER • Homogenizes connective tissue including heart, muscle and lung • Made from Wheaton 33 low extractable borosilicate glass • Interchangeable components takes the hassle out of matching parts • Autoclavable
0OTTER %LVEHJEM¬-ICRO¬4ISSUE¬'RINDER¬ • • • •
Made from Wheaton 33 low extractable borosilicate glass Micro size for extremely precise work Reservoir and pouring lip are incorporated into the design Autoclavable
Similar to the all-glass Potter-Elvehjem style, but micro size for extremely precise work, this unit is designed for delicate hand operation. Clearance between pestle and tube is .004” to .006” (0.1 to 0.15 mm). A reservoir and pouring lip are incorporated into the design. This grinder is made from Wheaton 33 low extractable borosilicate glass that conforms to USP Type I and ASTM E-438 Type I, Class A requirements. Cat. No.
Size (mL)
Mortar, OD x Length (mm)
Overall Length (mm)
357844
0.1
4 x 65
110
Qty/Case
2
2EPLACEMENT¬0ARTS Cat. No.
357841 357843
Description
0.1 0.1
Qty/Case
Pestle only Mortar only
2 2
These tapered tissue grinders have an improved design, which incorporates a longer tapered surface on both the mortar and pestle. The conical surface allows initial size reduction followed by passage through the cylindrical section for the final homogenization step. Grinding efficiency is improved, and less time is required as compared to the Tenbroeck and Potter-Elvehjem designs. When the pestle is “bottomed” within the mortar, the clearance is a uniform .004” to .006” (0.1 to 0.15 mm). The components are interchangeably ground, which allows easier replacement of parts; there is also no need to keep parts matched during cleaning. The ground glass surface on both the mortar and pestle are capable of homogenizing connective tissue including heart, muscle and lung. This unit can also be used for homogenizing skin and plant tissue, and is made from Wheaton 33 low extractable borosilicate glass that conforms to ASTM Type I, Class A and USP Type I requirements. Cat. No.
Size (mL)
Mortar, OD x Length (mm)
Overall Length (mm)
358103 358107 358111 358115
1 3 5 15
11 x 49 11 x 86 13 x 93 18 x 114
130 220 220 240
Qty/Case
1 1 1 1
2EPLACEMENT¬0ARTS
0OTTER %LVEHJEM¬4ISSUE¬'RINDER with Radial Serrations • • • •
Cat. No.
Description
358102 358106 358110 358114 358101 358105 358109 358113
1 mL Mortar Only 3 mL Mortar Only 5 mL Mortar Only 15 mL Mortar Only 1 mL Pestle Only 3 mL Pestle Only 5 mL Pestle Only 15 mL Pestle Only
Mortar made from Wheaton 33 low extractable borosilicate glass Radial serrated Teflon® pestle Interchangeable parts Autoclavable
Size (mL)
Mortar, OD x Length (mm)
Overall Length (mm)
357969 357974 357979 357984 357989 357994
2 5 10 15 30 55
11 x 45 13 x 66 16 x 74 19 x 84 24 x 118 30 x 130
203 219 219 219 266 266
• Teflon pestle with stainless steel rod fits power homogenizer • Homogenizes soft tissue such as brain • Mortar made from Wheaton 33 low extractable borosilicate glass • Interchangeable components takes the hassle out of matching parts • Autoclavable
Qty/Case
2 2 2 2 2 2
2EPLACEMENT¬0ARTS Cat. No.
Description
358028 358033 358038 358043 358048 358053 357966 357971 357976 357981 357986 357991
2 mL Mortar Only 5 mL Mortar Only 10 mL Mortar Only 15 mL Mortar Only 30 mL Mortar Only 55 mL Mortar Only 2 mL Serrated Pestle Only 5 mL Serrated Pestle Only 10 mL Serrated Pestle Only 15 mL Serrated Pestle Only 30 mL Serrated Pestle Only 55 mL Serrated Pestle Only
WHEATON
2 2 2 2 2 2 2 2
4APERED¬4ISSUE¬'RINDER
This grinder has a serrated Teflon® pestle that disperses homogenate into the mortar cylinder more efficiently. These units are precisely constructed with completely interchangeable parts, allowing for easier replacement of parts so you don’t need to keep pieces matched during cleaning. Grinding chamber clearance is .004” to .006” (0.1 to 0.15 mm). The unit can be autoclaved. Depth of the serrations is .020” to .025”. Diameter of the stainless steel shaft is 0.25” (6.3 mm). Cat. No.
Qty/Case
Qty/Case
2 2 2 2 2 2 2 2 2 2 2 2
This unit is the same as the Wheaton 358103 series, but with a Teflon® pestle for soft tissues such as brain. The stainless steel rod is 0.25” (6.3 mm) in diameter and is long enough to fit into the chuck of the Wheaton Overhead Stirrer. Cat. No.
Size (mL)
Mortar, OD x Length (mm)
Overall Length (mm)
358133 358137 358141 358145
1 3 5 15
11 x 49 11 x 86 13 x 93 18 x 114
130 220 220 240
Qty/Case
1 1 1 1
2EPLACEMENT¬0ARTS Cat. No.
Description
358132 358136 358140 358144 358131 358135 358139 358143
1 mL Mortar Only 3 mL Mortar Only 5 mL Mortar Only 15 mL Mortar Only 1 mL Pestle Only 3 mL Pestle Only 5 mL Pestle Only 15 mL Pestle Only
1.800.225.1437 (U.S. & Canada only) | +1.856.825.1100 | +1.856.825.1368 (F) | www.wheatonsci.com
Qty/Case
2 2 2 2 2 2 2 2
#ELL¬#ULTURE
46
-ICRO¬4ISSUE¬'RINDER¬¬ WITH¬4EmON ¬3PACER¬ • Teflon® spacer aligns the pestle and reduces aerosoling of the product • Made from Wheaton 33 low extractable borosilicate glass • Autoclavable
This unit consists of a finely ground glass pestle and tube. A Teflon® spacer aligns the pestle and reduces aerosoling of the product. The mortar and pestle come as a matched set. The pestle is manufactured from Wheaton 33 low extractable borosilicate glass that conforms to USP Type I and ASTM E-438 Type I, Class A requirements.
4ENBROECK¬4ISSUE¬'RINDER¬ • • • • •
Ideal for grinding liver, intestine and heart tissue Made from Wheaton 33 low extractable borosilicate glass Hollow pestle can be packed with ice Pour lip on mortar Autoclavable
All-glass Tenbroeck tissue grinders come with precision-made, interchangeable pestles and tubes; no need to keep components matched. This also allows for easier replacement of damaged parts. The clearance between pestle and tube is .0035-.0065” (0.09-0.16 mm). While this grinder is designed for hand operation, it can be slow-speed motor-driven by inserting a rubber stopper (size 00) and metal rod into pestle. The hollow handle permits packing with ice. This unit also features an expanded reservoir and pouring lip. Designed for tissues such as liver, intestines and heart, it’s made from Wheaton 33 low extractable borosilicate glass that conforms to USP Type I and ASTM E-438 Type I, Class A requirements. Cat. No.
Size (mL)
Mortar, OD x Length (mm)
Overall Length (mm)
357421 357422 357424 357426 357428
1 2 7 15 40
11 x 48 11 x 50 16 x 82 22 x 94 32 x 140
140 140 190 250 320
Qty/Case
2 2 2 2 2
Cat. No.
Size (mL)
Mortar, OD x Length (mm)
Overall Length (mm)
357848
0.2
7 x 33
115
Qty/Case
2
-ICRO¬4ISSUE¬'RINDER¬ WITH¬#AP¬ • With Teflon® Pestle and Screw Cap • Made from Wheaton 33 low extractable borosilicate glass • Autoclavable
This unit features a screw thread neck for use with the Wheaton Connection®. The 13-425 cap has an open top and a Teflon® faced silicone rubber liner. The clearance between pestle and mortar is 0.002-0.006” (0.05-0.15 mm). These grinders are manufactured from Wheaton 33 low extractable borosilicate glass that conforms to USP Type I and ASTM E-438 Type I, Class A requirements. Cat. No.
Size (mL)
Mortar, OD x Length (mm)
Overall Length (mm)
357535
0.5
13 x 37
115
Qty/Case
2
2EPLACEMENT¬0ARTS Cat. No.
Description
357536 357537
Extra Mortar and Cap Extra Pestle
Qty/Case
10 2
-ICRO¬4ISSUE¬'RINDER¬+IT¬ • • • •
Made from Wheaton 33 low extractable borosilicate glass Complete kit includes 7 micro tissue grinders Replacement parts available separately Autoclavable
$ISPOSABLE¬-ICRO¬4ISSUE¬'RINDER¬
A complete selection of Wheaton Micro Tissue Grinders is conveniently packed in a lightweight protective carrying case. The 0.5 mL micro tissue grinder with screw cap can be used for tissue grinding as well as for additional procedures. This particular tissue grinder chamber can be safely joined with another threaded-glass component, if needed, using the Wheaton Connection®. The Micro Tissue Grinder Kit is packed in a high-density polyethylene case with foam inserts. Cat. No.
Description
Qty/Kit
358204
Complete Kit
1
Qty/Case
1
1 1 1 1 1 1 1
2 2 2 2 2 2 1
2EPLACEMENT¬0ARTS 357421 357535 357538 357844 357848 358029 358133
1 mL Tenbroeck Tissue Grinder 0.5 mL Tissue Grinder, G.P.I. 13-425 cap 1 mL Dounce Tissue Grinder 0.1 mL Tissue Grinder 0.2 mL Tissue Grinder 2 mL Potter-Elvehjem Tissue Grinder 1 mL Tapered Tissue Grinder
WHEATON
• • • • •
Disposable tissue grinder eliminates cross contamination Useful for radioactive samples Small grinder area allows for high sample recovery Made from Wheaton 33 low extractable borosilicate glass Autoclavable
The Disposable Micro Tissue Grinder allows for homogenized tissue micro samples without cross-contamination. This unit is especially useful for radioactive samples. No washing is necessary; just dispose of the tissue grinder after use. The small grinding area allows high sample recovery. This disposable grinder is made from Wheaton 33 low extractable borosilicate glass that conforms to USP Type I and ASTM E-438 Type I, Class A requirements. Mortar Size: 10 x 44 mm Pestle Size: 7 mm sphere Cat. No.
Size (mL)
ID x Length (mm)
Overall Length (mm)
357860
0.75
8 x 44
88
1.800.225.1437 (U.S. & Canada only) | +1.856.825.1100 | +1.856.825.1368 (F) | www.wheatonsci.com
Qty/Case
25
47
#ELL¬#ULTURE /VERHEAD¬3TIRRER¬
Specifications:
• Allow for power homogenization or mixing • Speed control capable of RPM/torque combinations • Use only with tissue grinders with stainless steel rods • Keyless chuck accepts shaft size to 7.9 mm • One year warranty
The Wheaton Overhead Stirrer is a compact unit with solid state speed control capable of providing RPM/torque combinations for most laboratory operations such as homogenizing or mixing. The Wheaton Overhead Stirrer should be attached only to tissue grinders with Teflon® pestles and with stainless steel rods. Unit and motor are mounted in a housing with epoxy finish and is provided with a 6” aluminum rod and clamp for attachment to support stand. Keyless chuck accepts shaft sizes to 5/16” (7.9 mm). (Support stand not included.) Unit comes with a one year warranty.
-ICROTITER ¬0LATES¬
Speed Range: 300-5,000 RPM (Under load) Electrical Requirements: 120 VAC, 50/60 Hz, 50 watts Dimensions: 4-1/2” x 5” x 12” (11.5 x 13 x 30 cm) Weight: 6 lbs (2.7 kg) Cat. No
Description
903475
Complete Unit
Qty/Case
1
!CCESSORIES Cat. No
905275
905462 905465 905475
Description
Qty/Case Swivel Blade Paddle for Stirring Liquids in Vessels with Side Entry Port or for Vessels with Narrow Openings. Shaft 1/4” x 12” (6.3 x 305 mm). Blade Measures 1/2” x 2” (12.7 x 50.8 mm). Stainless Steel 1 Extension Rod, 1/4” x 6” (6.3 x 153 mm). For Use with Extension Sleeve for Lengthening Paddles. Stainless Steel 1 Extension Rod, 1/4” x 12” (6.3 x 305 mm). For Use with Extension Sleeve for Lengthening Paddles. Stainless Steel 1 Extension Sleeve for 1/4” (6.3 mm) Diameter Rods, with Set Screws. For Use in Lengthening Paddles. Stainless Steel 1
liner used for sealing volatile samples has cross slits for easier needle penetration. An optional liner is also available, Teflon-coated silicone septa, which plugs into each of the 96 vials for better sealing capabilities. The cover locks into place and has built-in O-rings, which provide a secondary sealing system. The Wheaton Multi-Tier Microtiter Plate is available assembled with the base plate, vials, spacers, Teflon/Silicone slit liner and cover, or as individual components. Wheaton microplates provide the advantages of glass without the cost! Specifications:
-ICROTITER ¬0LATES¬ 7ELL¬-ULTI 4IER© Wheaton microplates extend the uses of traditional microplates. Their unique combination of glass and plastic provide the benefits of each component while maintaining low cost. Wheaton microplate systems are useful for autosamplers and sample storage. The glass inserts are inert, and do not contain extractable materials. Wheaton microplates have sufficiently large volume inserts that perform as mother plates for high throughput screening applications. The microplates can be used for small fraction collection, great for collecting fractions in a format compatible to your auto injector, saving time and effort. Analytical chemistry laboratories use microtiter plates for different experimental assays, including sorbent assays, high throughput screening assays, and combinatorial chemistry analyses. Our microtiter plate can have a fixed height or it can be multi-tiered for adjustable height to support different-sized vials. The plate can be built via spacers, to hold capacities of 0.5 mL, 1.0 mL and 1.5 mL, depending on the height limitations of the instrument. The plate can hold various length 9 mm diameter conical bottom or flat bottom glass vials. Many of the assays performed in the analytical chemistry laboratories require heating or cooling of the vials to simulate in vitro conditions or for temperature sensitive experiments. The heating or cooling is usually done using liquids or gases. Our base plate has an open bottom so that the microtiter plate can be immersed in heating or cooling fluids allowing total fluid contact with the vials. This permits uniform transfer of temperature to and from the vials. The cover and liners for the plate provide a seal for individual samples to prevent sample evaporation and cross contamination. The Teflon®/silicone WHEATON
• • • • •
Standard 8 x 12 format with an alpha-numeric ID grid Glass conical bottom vials made of Type I borosilicate glass 0.5 mL, 9 x 17 mm - fits in base plate 1.0 mL, 9 x 30 mm - requires spacer and base plate 1.5 mL, 9 x 44 mm - requires 2 spacers and base plate
Advantages: • Use the same base plate for all vials and sample sizes • Open-bottom base plate provides even heating or cooling of vials when immersed • Cover locks the liner in place and prevents vial pullout • Base plate does not float in water bath • Conical design of glass vials permits maximum sample access • Secure fit of vials in plate permits use with shakers or vortex mixers during sample preparation • Teflon®/silicone liner with cross slits permits easier needle penetration • Glass vials provide inert solvent-resistant environment for samples
!"3¬0LATES Plates manufactured using ABS (Acrylonitrile Butadiene Styrene) have good chemical resistance against acids and bases. Includes base plate, vials, spacers, Teflon/ Silicone slit liner and cover, or as individual components. Cat. No.
Description
W845100 W845110 W845106
0.5 mL Microplate System - with Glass Conical Vials 1.0 mL Microplate System - with Glass Conical Vials 1.5 mL Microplate System - with Glass Conical Vials
1.800.225.1437 (U.S. & Canada only) | +1.856.825.1100 | +1.856.825.1368 (F) | www.wheatonsci.com
Qty/Case
1 1 1
#ELL¬#ULTURE
48
4OPAS ¬#/#¬0LATES Plates manufactured using Topas COC (Cyclic Olefin Copolymer) have excellent clarity and heat/chemical resistance. TOPAS COC Plates have excellent chemical resistance to aqueous acids and bases and to most polar solvents. The plates can be autoclaved and sterilized. Samples can be heated in Topas COC Plates. Includes base plate, vials, spacers, Teflon/Silicone slit liner and cover, or as individual components. Cat. No.
Description
W845102 W845112 W845108 W845101 W845113 W845107 W845114
0.5 mL Microplate System – with Glass Conical Vials 1.0 mL Microplate System – with Glass Conical Vials 1.5 mL Microplate System – with Glass Conical Vials 0.5 mL Microplate System – with Flat Bottom Vials 1.0 mL Microplate System – with Flat Bottom Vials 1.5 mL Microplate System – with Flat Bottom Vials 2.0 mL Microplate System – with Flat Bottom Vials
Qty/Case
1 1 1 1 1 1 1
3EALING¬-AT¬FOR¬-ICROPLATE¬3YSTEM Sealing system is designed for Wheaton’s microplates and is compatible with most 96-well plates with rounded well holes. Molded PTFE/Silicone has 96 plugs that lock into the vials and create an inert environment for the samples while preventing cross contamination. The molded liner is available prescored, which can be easily pierced by an autoinjector needle. The liners are made of Teflon® lined medical-grade silicone that conforms to USP Class VI requirements. Cat. No.
Description
W845124
Molded PTFE/Silicone Liner for Standard 96-Well Plates
Qty/Case
5
-ULTI 4IER©¬3ECTIONS¬¬ FOR¬-ICROPLATES The Wheaton Multi-Tier™ Microplate is available assembled with the base plate, vials, spacers, Teflon®/Silicone slit liner and cover, or as individual components. Cat. No.
Description
Qty/Case
ABS Sections W845120 W845121 W845122
Cover for Multi-Tier™ Microplate Spacer for Multi-Tier™ Microplate Base Plate
5 1 1
Cover for Multi-Tier™ Microplate Spacer for Multi-Tier™ Microplate Base Plate
5 1 1
Topas Sections
3EALING¬3TRIPS¬AND¬0LUGS¬FOR¬-ICROPLATE¬3YSTEM Sealing system is designed for Wheaton’s microplates and is compatible with most 96-well plates with rounded well holes. Molded PTFE (polytetrafluoroethylene)/Silicone 8-plug strips and individual plugs allow for limited testing in the Multi-Tier Plate or can be used for specific sample identification. The strips and plugs are made of Teflon® lined medical-grade silicone that meets the requirements of the USP Class VI. Cat. No.
Description
The glass conical vials are manufactured from Type I borosilicate glass. The glass provides an inert solvent resistant environment for samples. The vials fit securely in our base plate.
W845130 W845131 W845132 W845133 W845115 W845123 W845125 W845126 W845127
Molded PTFE/Silicone Strips - 8 Plugs Prescored Molded PTFE/Silicone Strips - 8 Plugs Molded PTFE/Silicone Plug Singles Prescored Molded PTFE/Silicone Plug Singles Liner PTFE/Butyl/PTFE, Flat, Pre-scored Liner PTFE/Silicone/PTFE, Flat, Pre-scored Molded Liner TFE/Butyl/TFE, 96 Plug Molded Liner TFE/Silicone/TFE, 96 Position Molded Liner TFE/Butyl/TFE, 96 Plug
6IAL¬,OADER¬FOR¬-ICROPLATE¬3YSTEM
3OLID¬#LEAR¬#OVER¬FOR¬-ICROPLATE¬3YSTEM
W845116 W845117 W845118
6IALS¬FOR¬-ULTI 4IER©¬-ICROPLATE¬3YSTEMS
The vial loader is a fast, convenient choice for loading our vials into the base plate. Just peel away the packaging and place an empty base plate on top of the vial loader. Invert the entire unit, and the plate is ready for use. Cat. No.
Description
W845140 W845141 W845142
0.5 mL Glass Conical Vials in Vial Loader 1.0 mL Glass Conical Vials in Vial Loader 1.5 mL Glass Conical Vials in Vial Loader
WHEATON
Cat. No.
Description
W845119
Solid Clear Cover
Qty/Case
96 96 96
1.800.225.1437 (U.S. & Canada only) | +1.856.825.1100 | +1.856.825.1368 (F) | www.wheatonsci.com
Qty/Case
12 12 100 100 5 5 5 5 5
Qty/Case
5
49
#ELL¬#ULTURE #ULTURE¬4UBES¬ ¬&LASKS #ULTURE¬# 45"% ¬¬ WITH¬3CREW¬#AP • For use as slant or shake cultures • Autoclavable
These standard round-bottom culture tubes are manufactured from 51 expansion borosilicate glass that conforms to ASTM Type I, Class B and USP Type I requirements. The tubes can be reused many times. The caps have a white 14B styrene-butadiene rubber liner or a Teflon® faced 14B styrene-butadiene rubber liner. See the Cap and Closure Section for replacement caps. Cat. No.
Capacity (mL)
Dia x H (mm)
Cap Size
Qty/Case
15-415 15-415 18-415
144 144 144
With White 14B Rubber Lined Cap (Autoclavable) 358606 358607 358610
11 14 27
16 x 100 16 x 125 20 x 150
With Teflon® Faced 14B Rubber Lined Caps (Autoclavable) 358646 358647 358650
11 14 27
16 x 100 16 x 125 20 x 150
15-415 15-415 18-415
144 144 144
.EPHELO¬#ULTURE¬&LASK¬ • With Cleanout Port and Caps • Autoclavable
These flasks are similar to Catalog Number 351054, but they have a lower sidearm, a side cleanout port, a 38-430 size top cap and a 20-415 size sidearm cap. The caps have white styrene-butadiene rubber liners. Cat. No.
Capacity (mL)
Volume (mL)
Sidearm Size (mm)
351454 351456 351486 351514 351516
300 300 500 1000 1000
200 200 250 600 600
14 x 140 19 x 140 19 x 140 14 x 140 19 x 140
Qty/Case
1 1 1 1 1
%RLENMEYER¬&LASK¬ • Ideal for media storage and cell culture • Autoclavable
This flask is designed for biological/media storage or culture. The flask is manufactured from Wheaton 33 low extractable borosilicate glass that conforms to USP Type I and ASTM E-438 Type I, Class A requirements.
Cat. No.
Capacity (mL)
Cap Size
Qty/Case
635134 635165
25 1000
20-400 38-430
1 1
Three baffle flask
Four baffle flask
3HAKE¬&LASK¬ • Maximizes aeration for improved growth • Break resistant lip • Autoclavable
Designed for use on either rotary or reciprocating shakers, these flasks are specially designed to maximize aeration for improved growth. They feature a break-resistant lip, which accommodates a cotton plug or a stopper, and a marking spot on the side of flask. These flasks are manufactured from Wheaton 33 low extractable borosilicate glass that conforms to USP Type I and ASTM E-438 Type I, Class A requirements. The four baffle flask features a dam at the base of the neck that reduces splashing.
.EPHELO¬#ULTURE¬&LASK
Cat. No.
• For use with colorimeter or spectrophotometer • Scratch and striation free side tube • Autoclavable
Capacity (mL)
Sidearm Size (mm)
351054
500
14 x 130
WHEATON
Qty/Case
With Three Baffles
These flasks allow growth and turbidity reading at selected intervals without sampling. Simply tilt flask to allow filling of the sidearm and insert sidearm into colorimeter or spectrophotometer. The side tube is scratch and striation free. Designed to operate on a platform shaker, the flask holds approximately 350 mL to the base of the sidearm. Material cannot enter the sidearm when on the shaker. The break-resistant lip accommodates a cotton plug or stopper. These flasks are manufactured from Wheaton 33 low extractable borosilicate glass that conforms to USP Type I and ASTM E-438 Type I, Class A requirements. Cat. No.
Capacity (mL)
Qty/Case
1
353255 353257 353259 353262 353264 353266
50 125 250 500 1000 2000
1 1 1 1 1 1
50 125 250 500 1000
1 1 1 1 1
With Four Baffles 354235 354237 354239 354242 354244
1.800.225.1437 (U.S. & Canada only) | +1.856.825.1100 | +1.856.825.1368 (F) | www.wheatonsci.com
#ELL¬#ULTURE
50
4RYPSINIZING¬&LASKS¬ Wheaton trypsinizing flasks are used to further reduce tissue to cellular components. Place tissue in flask, add trypsin and stir the vessel using the Wheaton Micro-Stir® magnetic stirrer. The deepfluted flask design promotes mixing turbulence; a dam below the sidearm retains untrypsinized tissue when decanting. Dissociated cells can then be collected. Trypsinizing flasks are also useful when removing cells from microcarrier beads. Single cells can then be used to start a seed culture in a flask or multiple flasks. After reaching a specific density, cultures can seed a suspension culture flask or roller bottle for high volume cell production.
4RYPSINIZING¬&LASK¬ • • • •
With Pourout and Caps Fluted design improves mixing Deep skirted screw caps 35 – 1500 mL size
These flasks feature deep-fluted sides to promote mixing. A dam below the sidearm retains untrypsinized tissue when decanting. A deep skirted screw cap on the sidearm prevents contamination of flask contents. The sidearm allows easier decanting of contents while retaining large particles behind the dam. Sidearm caps are 20-415 size. Caps have white styrene-butadiene rubber liners. Flasks are made from Wheaton 33 low extractable borosilicate glass that conforms to USP Type I and ASTM E-438 Type I, Class A requirements.
4RYPSINIZING¬&LASK¬ • Fluted design improves mixing • 35 – 1500 mL size
These units have screw caps with white styrene-butadiene rubber liners that reduce contamination of contents. The fluting is designed to improve mixing. The flasks are made from Wheaton 33 low extractable borosilicate glass that conforms to USP Type I and ASTM E-438 Type I, Class A requirements. Cat. No.
Capacity (mL)
Cap Size
Flask (mL)
355392 355393 355394 355395 355397 355398
35 75 150 300 700 1500
24-430 33-430 38-430 38-430 51-400 51-400
50 125 250 500 1000 2000
Cat. No.
Capacity (mL)
Top Screw Cap Size
Flask (mL)
355752 355753 355754 355755 355757 355758
35 75 150 300 700 1500
24-430 33-430 38-430 38-430 51-400 51-400
50 125 250 500 1000 2000
Qty/Case
1 1 1 1 1 1
Qty/Case
1 1 1 1 1 1
4RYPSINIZING¬&LASK ¬'RADUATED Cat. No. Capacity (mL)
355802 355803 355804 355805 355807 355808
35 75 150 300 700 1500
Top Screw Cap Size
24-430 33-430 38-430 38-430 51-400 51-400
Graduations (mL)
Every 5 10, 25, 50, 75 50, 75, 100, 150 80, 100, 150, 300 Every 100 Every 150
Flask (mL)
50 125 250 500 1000 2000
4RYPSINIZING¬&LASK ¬'RADUATED Cat. No.
Capacity (mL)
Cap Size
Graduations (mL)
355442 355443 355444 355445 355447 355448
35 75 150 300 700 1500
24-430 33-430 38-430 38-430 51-400 51-400
Every 5 10, 25, 50, 75 50, 75, 100, 150 80, 100, 150, 300 Every 100 Every 150
WHEATON
Flask (mL)
50 125 250 500 1000 2000
Qty/Case
1 1 1 1 1 1
For Hybridization Bottles see page 11.
1.800.225.1437 (U.S. & Canada only) | +1.856.825.1100 | +1.856.825.1368 (F) | www.wheatonsci.com
Qty/Case
1 1 1 1 1 1
#ELL¬#ULTURE
51
3PINNER¬&LASKS Wheaton Science Products has long been an innovator in cell culture flasks. The Wheaton Magna Flex® impeller produces high-yield cultures by maintaining even circulation while keeping cultures in suspension. Slow acceleration and slow stop from the Wheaton Micro-Stir® stirrer prevent cell detachment from microcarriers. Wheaton also invented an adjustable impeller flask that does not have a rod extending through the top of a flask. Celstir® flasks feature adjustable blade impeller for increased aeration and dimpled bottom to prevent the accumulation of cells under the impeller.* When used with the Micro-Stir, which can operate at very low
speeds, the Celstir flask provides an optimum environment for most suspension lines, including insect cell cultures. Hybridomas and adapted cell lines can also be grown in these spinner flasks. Sidearms on Magna Flex and Celstir vessels 500 mL and larger were widened to accommodate monitoring and control devices or media inlet/outlet lines. Wheaton has now moved cell culture another step forward with its innovative patented MantaRay® single-use culture flask. The MantaRay comes pre-sterilized to protect cell cultures. The MantaRay has a unique impeller that provides efficient, gentle stirring for both suspension or microcarrier culture. The MantaRay is disposable; discard it after use and save the time, trouble and expense of autoclaving and cleaning. *Dimpled bottom on 125 mL size and larger.
MantaRay® pictured with Micro-Stir® which is sold separately.
$OUBLE¬3IDEARM¬#ELSTIR ¬3PINNER¬&LASK
-ANTA2AY ¬3INGLE¬5SE¬#ELL¬#ULTURE¬&LASK¬
• Impeller rod does not protrude up through top cap • Sidearms for 500 mL - 8 L flask allow vented caps which enables the flask to “breathe” while protecting from contamination. • 1:1 headspace for good gas exchange • No contamination from stirring rod • Completely autoclavable
• • • •
Single use spinner flask with integrated magnet Pre-sterilized making it ready to use out of the box Break resistant unit has less potential for culture/sample loss One MantaRay generates the same yield as 77 T175 T-flasks conserving on valuable incubator space and reducing costs associated with laboratory consumables
The MantaRay’s integrated paddle spinner system is optimized for culturing volumes of 500 mL through 1000 mL. Using a vertically oriented stirrer, the MantaRay ensures that cells are evenly distributed throughout the entire volume of culture. Unlike conventional spinner flasks, the MantaRay’s paddle system comes ready-to-use, eliminating the need for assembly and disassembly of the device. The unique design of the spinner allows for even distribution of nutrients and oxygen; thus creating uniform media conditions for cell propagation. The constant agitation caused by the paddle system also prevents cells from settling to the bottom and adhering to the side walls. The paddle is integrated with the top plate, which stabilizes the fixed stirrer height thus eliminating validation concerns due to height adjustments. The paddle and bag are heat sealed to the top plate reducing potential contamination related to adhesive compounds. The only required pieces of equipment for use of the MantaRay system are the MantaRay and a magnetic stirrer. Use the MantaRay for growing mammalian cell cultures, as well as plant and insect cells. The MantaRay’s proprietary stirrer technology is designed to minimize damage to fragile cells, such as mammalian. The MantaRay also allows media and gases to be added or changed during the experiment under sterile conditions. The MantaRay can culture cells on micro-carrier beads, which the cells use as a growth surface. The MantaRay comes pre-sterilized. Simply fill the flask with media, add cells and let them grow. Use the MantaRay with the Wheaton Micro-Stir® slow speed (5-200 RPM) magnetic stirrer. See page 53 for details. Cat. No.
Description
Working Volume (mL)
W356805-1 W356805-4
MantaRay MantaRay
1000 1000
WHEATON
Qty/Case
1 4
The Celstir Spinner Flask features an adjustable paddle blade impeller for better mixing. The addition of the bottom dimple to flasks 125 mL and larger improves circulation and reduces the accumulation of cells in the center of the flask. Celstirs provide maximum surface interface between culture and flask atmosphere. Use the Celstirs for microcarrier and suspension cultures such as insect cells, hybridomas, and adapted cell lines. The entire unit may be autoclaved at 121°C for 20 minutes. Celstirs are made from Wheaton 33 low extractable borosilicate glass that conforms to ASTM Type I, Class A and USP Type I requirements. Wheaton also offers a non-breakable stainless steel shaft assembly kit as a retrofit to your Celstir (see 356874 series). Units 500 mL and larger can be used with the Vented Cap (Cat. No. W240751). Graduations: Sizes 125 to 1000 mL are graduated in 50 mL increments; sizes 3000 to 8000 mL are graduated in 500 mL increments; sizes 25 mL and 50 mL are non-graduated. Cat. No.
Volume (mL)
Dia x H (mm)
Cap Size, Top
Sidearm Size
356873 356875 356876 356879 356882 356884 356887 356889 356890
25 50 125 250 500 1000 3000 6000 8000
38 x 122 38 x 141 65 x 155 85 x 175 110 x 190 130 x 250 178 x 341 258 x 404 293 x 445
38-430 38-430 51-400 51-400 100-400 100-400 100-400 100-400 100-400
15-415 15-415 33-430 33-430 45 mm 45 mm 45 mm 45 mm 45 mm
For sidearm replacement caps see page 41. For vented caps see page 42.
1.800.225.1437 (U.S. & Canada only) | +1.856.825.1100 | +1.856.825.1368 (F) | www.wheatonsci.com
Qty/Case
1 1 1 1 1 1 1 1 1
#ELL¬#ULTURE
52
¬ 2EPLACEMENT¬0ARTS¬ 3TAINLESS¬3TEEL¬3HAFT¬!SSEMBLY¬+IT¬ Replacement for Double Sidearm Celstir and Jacketed Double Sidearm Celstir. This non-breakable stainless steel shaft, for replacing the glass shaft included with Celstir® flasks, may be retrofitted to the existing Celstir flasks.
*ACKETED¬$OUBLE¬3IDEARM¬#ELSTIR ¬3PINNER¬&LASK • • • • • •
Water jacket allows for precise temperature control Manufactured from Wheaton 33 low extractable borosilicate glass Proportioned to provide a head space ratio of 1:1 or greater The impeller does not protrude through the top cap Fully autoclavable PTFE faced rubber-lined caps on sidearms
The Double-Sidearm Celstir with water jacket allows precise temperature control of its contents when operated with a recirculating water bath. The hose connectors accept 1/4 in (6.35 mm) ID tubing. This unit is made from Wheaton 33 low extractable borosilicate glass that conforms to USP Type I and ASTM E-438 Type I, Class A requirements. The 500 and 1000 mL sizes can also be used with Wheaton Vented Cap Cat. No. W240751. Cat. No.
Volume (mL)
Dia x H (mm)
356943 356945 356946 356949 356952 356954
25 50 125 250 500 1000
54 x 134 54 x 147 78 x 162 100 x 182 130 x 195 150 x 260
Cap Size, Top Sidearm Size
38-430 38-430 51-400 51-400 100-400 100-400
Qty/Case
15-415 15-415 33-430 33-430 45 mm 45 mm
1 1 1 1 1 1
Cat. No.
For Flask Size (mL)
356874 356877 356878 356880 356883 356885 356886 356888 356891
25 50 125 250 500 1000 3000 6000 8000
Qty/Case
1 1 1 1 1 1 1 1 1
2EPLACEMENT¬)MPELLER¬ Replacement for Double Sidearm Celstir and Jacketed Double Sidearm Celstir. This unit includes a top cap with liners, glass rod, magnet holder, magnet and stirring paddle (for sizes 125 mL or larger). Cat. No.
For Flask Size (mL)
356893 356895 356896 356899 356902 356904 356907 356909 356910
25 50 125 250 500 1000 3000 6000 8000
Qty/Case
1 1 1 1 1 1 1 1 1
2EPLACEMENT¬)MPELLER Replacement for Magna Flex® Spinner Flasks. This unit includes a top cap with liners, glass stirring ball and connecting silicone tubing. This glass impeller assembly is designed for replacement on all Magna Flex® style flasks.
-AGNA¬&LEX ¬-ICROCARRIER¬3PINNER¬&LASK¬
Cat. No.
For Flask Size (mL)
356841 356842 356843 356844 356847 356848 356849
125 250 500 1000 3000 6000 8000
1 1 1 1 1 1 1
2EPLACEMENT¬&LASK¬FOR¬#ELSTIR ¬AND¬-AGNA¬&LEX ¬
• Designed for use with microcarrier cultures • Side arms for 500 mL - 6 L flasks allow vented caps which enables the flask to “breath” while protecting from contamination • Gentle, even stirring action
Cat. No.
For Flask Size (mL)
Qty/Case
Celstir Only
The Wheaton Magna Flex Spinner Flasks feature a flex-type, bulb-shaped glass impeller that rotates from a fixed position above liquid level around an indentation in the base of the flask. Primarily designed for use with microcarrier cultures, this unique stirring system increases stirring efficiency and provides a gentle, even circulation throughout the flask while keeping the beads in suspension.
356913 356915 356930
All flasks have been proportioned to provide a head space ratio of 1:1 or greater. A removable stainless steel pin immobilizes the impeller during handling or decanting to prevent damage to cells or microcarriers. Sizes 500 mL and larger can accommodate the Wheaton Vented Cap (Cat. No. W240751). Cat. No.
Volume (mL)
Dia x H (mm)
Cap Size, Top
Sidearm Size
Jacketed Celstir Flask
356830 356831 356832 356834 356837 356839
125 250 500 1000 3000 6000
65 x 155 85 x 175 110 x 190 130 x 250 178 x 341 258 x 404
51-400 51-400 100-400 100-400 100-400 100-400
33-430 33-430 45 mm 45 mm 45 mm 45 mm
Qty/Case
1 1 1 1 1 1
25 mL Celstir Flask Only 50 mL Celstir Flask Only 8000 mL Celstir Flask Only
1 1 1
125 mL Celstir/Magna Flex Flask Only 250 mL Celstir/Magna Flex Flask Only 500 mL Celstir/Magna Flex Flask Only 1000 mL Celstir/Magna Flex Flask Only 3000 mL Celstir/Magna Flex Flask Only 6000 mL Celstir/Magna Flex Flask Only
1 1 1 1 1 1
25 mL Jacketed Celstir Flask Only 50 mL Jacketed Celstir Flask Only 125 mL Jacketed Celstir Flask Only 250 mL Jacketed Celstir Flask Only 500 mL Jacketed Celstir Flask Only 1000 mL Jacketed Celstir Flask Only
1 1 1 1 1 1
Celstir & Magna-Flex 356916 356919 356922 356924 356927 356929
WHEATON
Qty/Case
356963 356965 356966 356969 356972 356974
1.800.225.1437 (U.S. & Canada only) | +1.856.825.1100 | +1.856.825.1368 (F) | www.wheatonsci.com
53
#ELL¬#ULTURE -ICRO 3TIR ¬3LOW¬3PEED¬-AGNETIC¬3TIRRER¬ • 5-200 RPM
Designed specially for cell culture applications requiring exceptionally slow speeds, gentle mixing preventing shear and low heat transfer. May be used in an environment with CO2 and non-condensing humidity, and with a temperature range to 50°C. Packaged 1 unit per case. Cat. No.
Plug Style
Single Place Micro-Stir® W900700-A W900700-B W900700-C W900700-D W900700-F W900700-G W900700-J
Single Place BioStir
120 VAC, North America 100 VAC, Japan 230 VAC, Continental Europe 230 VAC, United Kingdom 240 VAC, Australia/China 230 VAC, Italy/Chile 230 VAC, India
Four Place Micro-Stir® W900701-A W900701-B W900701-C W900701-D W900701-F W900701-G W900701-J Four Place Micro-Stir
120 VAC, North America 100 VAC, Japan 230 VAC, Continental Europe 230 VAC, United Kingdom 240 VAC, Australia/China 230 VAC, Italy/Chile 230 VAC, India
"IO3TIR ¬(EAVY¬$UTY¬-AGNETIC¬3TIRRER¬¬
"IO3TIR ¬ ¬-ICRO 3TIR ¬-AGNETIC¬3TIRRERS¬ • Computerized stirrer control • Rotation speed clearly visible for consistent results • Variety of operating modes for suspension or microcarrier cultures Constant Speed Mode - Soft start to a constant stirring speed, this mode is used for suspension cultures. Interval Start Mode - This mode turns the stirrer on and off using the soft start and stop for a set number of cycles, after which the stirrer runs at a constant speed that may differ from the speed used to attach the cells. This mode is useful for attaching cells to micro-carrier beads. There is no need to watch the culture and turn on the stirrer for a constant stir mode after the cells have attached. 2-Speed Stirring Mode - The stirrer slowly starts to a set speed, which is held for a user-defined period. The stirrer then softly changes to a final constant speed. This mode is also useful for microcarrier applications. • 2 year warranty • Conforms to UL, CSA, and CE Standards • Optional remote control
Specifications: Electrical: Operating voltage: .....................................................100-240 VAC, 50/60 Hz Power consumption: ........................................................................ 15 Watts Pollution Degree: ............................................................................... Class 2 Environmental: Operating temperature: ............................................................. 15°C to 40°C Humidity: .........................................................80% up to 31°C, 50% at 40°C Altitude limit: ............................................................................. 2000 meters Operational: Operating speed: Micro-Stir: ........................................................................ 5 - 200 RPM BioStir: ....................................................................... 150 - 1200 RPM Maximum flask size: .........................................................................3 L flask Dimensions: H x W x D Single Place: .................................... 3.6 x 8.0 x 9.8 in (9.2 x 20.3 x 24.9 cm) Four Place: ..................................4.0 x 15.5 x 17.5 in (10.2 x 39.4 x 44.5 cm) Weight: Single Place: ........................................................................... 4.5 lb (1.9 kg) Four Place: .............................................................................. 10 lb (4.5 kg)
WHEATON
• 150-1200 RPM
Designed specifically for use with suspension culture flasks. The effortless motor provides uniform speeds for great results with cell culture or small fermentations. An easy-to-read display allows exact RPM to be set. The smoothrunning motor reduces heat transfer to medium being stirred. Takes flask sizes to 3 Liters. May be used in an environment with CO2 and non-condensing humidity, and with a temperature range to 50°C. Packaged 1 unit per case. Cat. No.
Plug Style
Single Place BioStir® W900702-A W900702-B W900702-C W900702-D W900702-F W900702-G W900702-J
120 VAC, North America 100 VAC, Japan 230 VAC, Continental Europe 230 VAC, United Kingdom 240 VAC, Australia/China 230 VAC, Italy/Chile 230 VAC, India
Four Place BioStir® W900703-A W900703-B W900703-C W900703-D W900703-F W900703-G W900703-J
120 VAC, North America 100 VAC, Japan 230 VAC, Continental Europe 230 VAC, United Kingdom 240 VAC, Australia/China 230 VAC, Italy/Chile 230 VAC, India
2EMOTE¬#ONTROL • For BioStir® and Micro-Stir® Magnetic Stirrers
The Wheaton Remote Control allows all stirrer functions to be controlled and monitored without opening an incubator and disturbing the incubator contents. The remote control comes with a 12 ft. (3.66 m) cord which allows the stirrer to be placed in an incubator (such as the Wheaton roll-in or CO2 Incubators) while allowing freedom of placement for the remote controller. Cat. No.
Description
W900704
Remote Control
1.800.225.1437 (U.S. & Canada only) | +1.856.825.1100 | +1.856.825.1368 (F) | www.wheatonsci.com
Qty/Case
1
#ELLÂŹ#ULTURE Cat. No.
"IOREACTORS
Plug Style
250 mL Cell Optimizer System W350000-A W350000-B W350000-C W350000-D W350000-F W350000-G W350000-J
54
Voltage
Qty/Case
120 VAC 100 VAC 230 VAC 230 VAC 240 VAC 230 VAC 230 VAC
1 1 1 1 1 1 1
120 VAC 100 VAC 230 VAC 230 VAC 240 VAC 230 VAC 230 VAC
1 1 1 1 1 1 1
120 VAC 100 VAC 230 VAC 230 VAC 240 VAC 230 VAC 230 VAC
1 1 1 1 1 1 1
120 VAC 100 VAC 230 VAC 230 VAC 240 VAC 230 VAC 230 VAC
1 1 1 1 1 1 1
ÂŽ
North America Japan Continental Europe United Kingdom Australia/China Italy/Chile India
500 mL Cell Optimizer SystemÂŽ W350010-A W350010-B W350010-C W350010-D W350010-F W350010-G W350010-J
North America Japan Continental Europe United Kingdom Australia/China Italy/Chile India
1 Liter Cell Optimizer SystemÂŽ W350020-A W350020-B W350020-C W350020-D W350020-F W350020-G W350020-J
#ELL/PTIMIZER3YSTEMš Key areas of use are: • • • • •
North America Japan Continental Europe United Kingdom Australia/China Italy/Chile India
3 Liter Cell Optimizer SystemÂŽ
Small culture bioreactor Cell culture process optimization Insect cell culture techniques Hybridoma cell culture methods Viral infection studies
The Cell Optimizer SystemŽ is a complete, small-volume cell culture bioreactor. This system provides a quick and accurate determination of optimum environmental cell growth parameters. Cell growth in the Cell Optimizer System takes place in a 250 mL, 500 mL, 1 liter or 3 liter working volume spinner ask with four (4) sidearms. The system includes a Control Tower™, Control Tower Support Unit and Micro-StirŽ magnetic stirrer. The Control Tower and support unit automatically controls pH via base addition and CO2 gas, and dissolved oxygen utilizing air, O2 and N2 gases. Temperature is maintained by the use of a heating pad that eliminates the need for an incubator. Stirring speed (5-200 RPM) is achieved by manually setting the Micro-StirŽ magnetic stirrer. Foam and nutrient feed control are available as options. The support unit includes a combination heater/pump module for temperature control and liquid base addition. A four-gas mixing module provides controlled additions of necessary gases to the vessel head space (and/or optional sparger). One year warranty.
W350030-A W350030-B W350030-C W350030-D W350030-F W350030-G W350030-J
North America Japan Continental Europe United Kingdom Australia/China Italy/Chile India
For more information on plug styles see page 188.
!CCESSORIESFOR#ELL/PTIMIZER3YSTEMš 2EPLACEMENT3PINNER&LASKS Cat. No.
Description
WI055902 356922 WL054377 WL054376
250 mL Spinner Flask with 2 Sidearms 500 mL Spinner Flask with 2 Sidearms 1 L Spinner Flask with 4 Sidearms 3 L Spinner Flask with 4 Sidearms
Voltage
This 125 watt heating pad plugs into the Support Unit and is controlled by the Control Tower™. Dimensions: 12.7 x 12.7 cm. Description
Voltage
Probe SpeciďŹ cations:
I057638 I057599
Heating pad Heating pad
100-120 VAC, 50/60 Hz, 125 watts 220-240 VAC, 50/60 Hz, 125 watts
Temperature: ............................................................................ 100 Ohm RTD Dissolved Oxygen: ........................................................ Polarographic, 12 mm pH: ................................................................... Pressurized, Gel Filled, 12 mm
3AMPLER
Units come conďŹ gured for temperature, pH and dissolved oxygen. Other conďŹ gurations are available upon request. For ease of record keeping and supervisory control, up to 32 Cell Optimizer System setups can be networked to the optional BIOPROÂŽ PC supervisory software. See page 57 for details.
1 1 1 1
(EATINGÂŹ0AD
Cat. No.
For more speciďŹ cs on the Control Tower see page 56.
Qty/Case
Qty/Case
1 1
The 316 L stainless steel sampler is designed to work with either the 1 or 3 liter ask. The sampler is supplied with a plug valve to help maintain sterility of the vessel during sampling. Cat. No.
Description
I057501
Sampler with plug valve, 30.5 cm
Qty/Case
1
#OLDÂŹ&INGER The 316 L stainless steel tubular cold ďŹ nger may be used with either the 1 or 3 liter ask.
š
0RESERVEÂŹYOURÂŹCELLSÂŹINÂŹ7HEATONÂŹ#RYULE ÂŹ CRYOGENICÂŹVIALS ÂŹ3EEÂŹPAGESÂŹ ÂŹÂŹ FORÂŹMOREÂŹINFORMATION Cat. No.
Description
Qty/Case
I057459
Cold Finger
1
Due to speciďŹ c country requirements, the Cell Optimizer is not available for sale in Canada and Europe.
WHEATON
1.800.225.1437 (U.S. & Canada only) | +1.856.825.1100 | +1.856.825.1368 (F) | www.wheatonsci.com
55
#ELL¬#ULTURE ¬,ITER¬-INI 0ILOT¬0LANT© 19 Liter Mini-Pilot Plant™ System with Control Tower™ configured for temperature, pH and dissolved oxygen; Support Unit with a heater/pump module and a four-gas mixing module; Overdrive™ stirrer speed control (20-150 RPM); 19 liter vessel with six sidearms; temperature, pH and dissolved oxygen probes and cables; sparger; heating blanket; filters; and a 1 liter storage bottle (for base addition). This unit comes with one of seven standard electrical plugs. Additional configurations are available through special order.
-INI 0ILOT¬0LANT© Key areas of use are: • Large volume cell culture bioreactor • Scale cultures up to production volume • Antibody or virus production • Pilot plant studies • Economical mass cell production • Production of proteins or other cell products
Cat. No.
Plug Style
Voltage
Qty
W350050-A W350050-B W350050-C W350050-D W350050-F W350050-G W350050-J
North America Japan Continental Europe United Kingdom Australia/China Italy/Chile India
120 VAC 100 VAC 230 VAC 230 VAC 240 VAC 230 VAC 230 VAC
1 1 1 1 1 1 1
¬,ITER¬-INI 0ILOT¬0LANT©
The Mini-Pilot Plant™ spinner flask system is a large-volume cell culture bioreactor designed to scale cultures up to production volumes of cells or products. The system includes a Control Tower™, Support Unit, Overdrive™, heating blanket, sparger, and a choice of a 10 liter (six sidearms), 19 liter (six sidearms) or 45 liter (seven sidearms) vessel. The Control Tower™ and Support Unit automatically control pH via base addition and CO2 gas, and dissolved oxygen utilizing air, O2 and N2 gases. For more specifics on the Control Tower see page 56. Temperature is maintained by the use of a heating blanket that eliminates the need for an incubator. Stirring speed is achieved by manual setting of the Overdrive system. Foam and nutrient feed control are available as options. The Support Unit includes a combination heater/pump module for temperature control and liquid base addition. A four-gas mixing module provides controlled additions of necessary gases to the vessel headspace and sparger. One year warranty. Probe Specifications: Temperature: ........................................................................... 100 Ohm RTD Dissolved Oxygen: ........................................................ Polarographic, 12 mm pH: ................................................................... Pressurized, Gel Filled, 12 mm
For ease of record keeping and supervisory control, up to 32 Mini Pilot System setups can be networked to the optional BIOPRO® PC supervisory software. See page 57 for details. For more information on plug styles see page 188.
The 45 Liter Mini-Pilot Plant™ System with Control Tower™ is configured for temperature, pH and dissolved oxygen; a Support Unit with a heater/pump module and a four-gas mixing module; Overdrive™ stirrer speed control (20-150 RPM); 45 liter vessel with seven sidearms; temperature, pH and dissolved oxygen probes and cables; sparger; heating blanket; filters; and a 1 liter storage bottle (for base addition). This unit comes with one of seven standard electrical plugs. Additional configurations are available through special order. Cat. No.
Plug Style
Voltage
Qty
W350060-A W350060-B W350060-C W350060-D W350060-F W350060-G W350060-J
North America Japan Continental Europe United Kingdom Australia/China Italy/Chile India
120 VAC 100 VAC 230 VAC 230 VAC 240 VAC 230 VAC 230 VAC
1 1 1 1 1 1 1
For more information on plug styles see page 188.
!CCESSORIES¬FOR¬-INI 0ILOT¬0LANT© (EATING¬7RAP The heating wrap plugs into the support unit and is controlled by the Control Tower™. Cat. No.
Description
WI055974 WI055975 I057152 I057621 I057153 I057622
Heating Wrap, 10 L Heating Wrap, 10 L Heating Wrap, 19 L Heating Wrap, 19 L Heating Wrap, 45 L Heating Wrap, 45 L
¬,ITER¬-INI 0ILOT¬0LANT©
Voltage
100-120 VAC, 700 watts 220-240 VAC, 700 watts 100-120 VAC, 700 watts 220-240 VAC, 700 watts 100-120 VAC, 960 watts 220-240 VAC, 960 watts
1 1 1 1 1 1
3AMPLER
™
The 316 L stainless steel sampler is designed to work with the 10, 19 or 45 liter Mini-Pilot Plant™. The sampler is supplied with a plug valve to help maintain sterility of the vessel during sampling.
™
The 10 liter Mini-Pilot Plant System comes with a Control Tower configured for temperature, pH and dissolved oxygen; Support Unit with a heater/pump module and a four-gas mixing module; Overdrive™ stirrer speed control (20-150 RPM); 10 liter vessel with six sidearms; temperature, pH and dissolved oxygen probes and cables; sparger; heating blanket; filters; and a 1 liter storage bottle (for base addition). This unit comes with one of seven standard electrical plugs. Additional configurations are available through special order. Cat. No.
Plug Style
Voltage
Qty
W350040-A W350040-B W350040-C W350040-D W350040-F W350040-G W350040-J
North America Japan Continental Europe United Kingdom Australia/China Italy/Chile India
120 VAC 100 VAC 230 VAC 230 VAC 240 VAC 230 VAC 230 VAC
1 1 1 1 1 1 1
Cat. No.
Description
I057502
Sampler with plug valve, 48.3 cm
Qty/Case
1
#OLD¬&INGER The 316 L stainless steel tubular cold finger may be used with the 10, 19 or 45 liter Mini-Pilot Plant™.
Cat. No.
Description
Qty/Case
I057617
Cold Finger
1
Due to specific country requirements, the Mini-Pilot Plant is not available for sale in Canada and Europe.
WHEATON
Qty/Case
1.800.225.1437 (U.S. & Canada only) | +1.856.825.1100 | +1.856.825.1368 (F) | www.wheatonsci.com
#ELL¬#ULTURE
56
/VERDRIVE©¬¬ ,ARGE¬6OLUME¬¬ #ELL¬#ULTURE¬3YSTEM • 1 year warranty
#ONTROL¬4OWER© $IGITAL¬#ONTROL¬3YSTEM¬ • Monitor and control up to eight operation parameters • Monitor and control parameters in multiple vessels • Network up to 32 Control Tower™ units
The Control Tower Digital Control System is a versatile and compact system for mammalian cell culture and insect cell culture. The system provides bench-scale monitoring and PID control of operation parameters. The Control Tower and Support Unit can be factory configured for any combination of the following parameters: • pH • Dissolved oxygen • Temperature • Anti-foam • Nutrient feed To further enhance the Control Tower, the BIOPRO® PC software (see page 57) provides sophisticated data acquisition, expanded process control capability and the ability to network together up to 32 systems. The Control Tower allows you to set and confirm setpoints and PID values, calibrate temperature, pH and DO sensors, and set times for feed pump operations. Monitor parameters and data entry by scrolling through the menus using the front panel keypad. All data is displayed on a two-line LCD. All cable connections for sensors and external devices (e.g., Support Unit) are on the rear of the unit. Specifications: Operating Voltage: ..................................... 100-120 VAC, 50/60 Hz, 10 watts 220-240 VAC, 50/60 Hz, 10 watts Dimensions: ............................................................... 16.5 x 22.8 x 38.7 cm Weight: ................................................................................. 4.5 kg (9.9 lbs)
#ONTROL¬4OWER©¬3UPPORT¬5NIT¬ Modular design allows for any combination of pumps, gas mixing and heating control The modular support unit adds automated reagent pumping, gas mixing and heating capabilities to support the Control Tower™ in maintaining bioreactors. A single support unit can have up to four modules to conserve bench space. The following modules can be combined in the factory to create the support unit: • Peristaltic pump module for automatic addition of liquid acid, base, antifoam or nutrients, with or without heater option • Four-gas mixing module for cell culture (air, O2, CO2, N2 gas); flow rate 0-500 cc/min
Specifications: Operating Voltage: 100-120 VAC, 50/60 Hz, 1000 watts maximum 220-240 VAC, 50/60 Hz, 1000 watts maximum Dimensions: 16.5 x 16.5 x 19.7 cm* *Base & 1 module; each additional module add 9.5 cm
The Control Tower Control System and Support Unit are integrated with the Cell Optimizer and Mini-Pilot Plant System; however, they are available separately upon request. Contact Wheaton for more details. WHEATON
This complete system comes with the vessel, impeller assembly and top drive motor. (When ordering, please specify 10, 19 or 45 liter vessels to provide working volumes of 8.5, 16 or 36 liters respectively). The large, adjustable height PTFE paddle (part of the impeller assembly) works together with the dimple in the bottom of the flask to provide gentle, even distribution and reduce dead areas. The impeller’s wetted components include 316 L stainless steel, virgin PTFE and Rulon® 641. Rulon 641 is a specially formulated compound of virgin PTFE and fillers approved by the FDA for use as a food component and thus for direct contact with food and drugs intended for oral consumption. The vessel is equipped with six or seven 45 mm sidearms to accommodate probes for monitoring and control, and tubing for sparging or media addition. The vessel and impeller sections are autoclavable; the lift-off top drive section is not autoclavable. This unit comes with one of seven standard electrical plugs. Additional configurations are available through special order. Electrical Requirements: ...................................100-120 VAC, 60Hz, 30 watts 220-240 VAC, 50/60 Hz, 30 watts Dimensions D x H (Vessel and Overdrive™ together): 10 Liter System: ............................................................... 23 cm x 64 cm 19 Liter System: ............................................................... 29 cm x 67 cm 45 Liter System: ............................................................... 41 cm x 78 cm Cat. No.
Plug Style
Voltage
Qty/Case
North America Japan Continental Europe United Kingdom Australia/China Italy/Chile India
120 VAC 100 VAC 230 VAC 230 VAC 240 VAC 230 VAC 230 VAC
1 1 1 1 1 1 1
North America Japan Continental Europe United Kingdom Australia/China Italy/Chile India
120 VAC 100 VAC 230 VAC 230 VAC 240 VAC 230 VAC 230 VAC
1 1 1 1 1 1 1
North America Japan Continental Europe United Kingdom Australia/China Italy/Chile India
120 VAC 100 VAC 230 VAC 230 VAC 240 VAC 230 VAC 230 VAC
1 1 1 1 1 1 1
North America Japan Continental Europe United Kingdom Australia/China Italy/Chile India
120 VAC 100 VAC 230 VAC 230 VAC 240 VAC 230 VAC 230 VAC
1 1 1 1 1 1 1
10 Liter System W356700-A W356700-B W356700-C W356700-D W356700-F W356700-G W356700-J
19 Liter System 356420-A 356420-B 356426-C 356426-D 356426-F 356426-G W356426-J
45 Liter System 356422-A 356422-B 356428-C 356428-D 356428-F 356428-G W356428-J
Top Drive Motor Only 356424-A 356424-B 356430-C 356430-D 356430-F 356430-G W356430-J
!CCESSORIES Cat. No.
Description
356433 WL052594 356471 I050567 W356473 WL055973
Impeller Assembly, 45 L 19 L Vessel with 6 Sidearms without Caps 19 L Vessel with 6 Sidearms with Caps 45 L Vessel with 7 Sidearms without Caps 45 L Vessel with 7 Sidearms with Caps 10 L Vessel with 6 Sidearms
1.800.225.1437 (U.S. & Canada only) | +1.856.825.1100 | +1.856.825.1368 (F) | www.wheatonsci.com
Qty/Case
1 1 1 1 1 1
57
#ELL¬#ULTURE ")/02/ ¬0#¬3UPERVISORY¬3OFTWARE
The BIOPRO®PC software is designed to extend the operational capabilities of the Control Tower™ System and Support Unit. This Microsoft® Windows® based software provides both supervisory control and monitoring of key process parameters, along with data archiving functions.
BIOPRO® PC Software features: • Enhanced programmable control and data acquisition capability for the Control Tower local controller • Networking of up to 32 Control Tower units for central supervisory control and data acquisition • Permanent documentation for batch records • Works with Microsoft Windows NT, 2000 and XP • Continuous graphic display • Trend graphing • Process sequencing • Password protection • Minimal operator training requirement The software stores all measured parameters and records all changes made to the system. Alarm conditions that occur during a run are highlighted and flagged. Externally measured variables such as total cell counts, nutrient and metabolic levels, and off-gas analysis data can be manually entered into the log for documentation and data analysis. A continuous graphic display of system data allows for ease of monitoring while a permanent record is created for use in process validation or batch records. The BIOPRO®PC software offers trend graphing with user-adjustable data acquisition rates,
For #ELL¬3TORAGE see Wheaton Cryule® Cryogenic Vials on pages 140-142 and Vial Racks on page 149. WHEATON
variable channels and multi-tasking capability. The computer can be used for other operations while monitoring and recording data. All data stored in the computer is compatible with Microsoft Excel® for further analysis. Consistent batch-to-batch results can be achieved by directly downloading batch recipes from the software to the Control Tower. The “timed events” function allows for automatic extension of up to 200 steps. For added security, two levels of password protection are available.
BIOPRO® PC Monitor and Control Software Includes: RS-232 to RS-485 adapter box with power module and appropriate line cord. 100-120 VAC, 220-240 VAC 50/60 Hz This unit comes with one of seven standard electrical plugs. Additional configurations are available through special order. Cat. No.
Plug Style
Voltage
Qty
W350070-A W350070-B W350070-C W350070-D W350070-F W350070-G W350070-J
North America Japan Continental Europe United Kingdom Australia/China Italy/Chile India
120 VAC 100 VAC 230 VAC 230 VAC 240 VAC 230 VAC 230 VAC
1 1 1 1 1 1 1
For more information on plug styles see page 188.
For 4ISSUE¬#ULTURE¬-EDIA¬3TORAGE¬see the Wheaton Glass Media Bottles on page 12 and page 30 for Plastic Media Bottles.
1.800.225.1437 (U.S. & Canada only) | +1.856.825.1100 | +1.856.825.1368 (F) | www.wheatonsci.com
#ELL¬#ULTURE
58
"ENCH¬4OP¬2OLLER¬#ULTURE¬!PPARATUS
Pictured with Two Additional Deck Kits
Pictured with Two Additional Deck Kits
-INI¬"OTTLE¬"ENCH 4OP¬2OLLER¬#ULTURE¬3YSTEM¬
3MALL¬"OTTLE¬"ENCH 4OP¬2OLLER¬#ULTURE¬3YSTEM
• • • • •
• • • • •
Allows precise rotation speed Small scale mixing and agitation Small footprint Conforms to UL, CSA, and CE Standards 1 year warranty
Perfect for Wheaton 30 mL or larger serum bottles, 100-125 mL media bottles or 38 x 200 mm culture tubes for the growth and observation of various cell cultures such as, single chicken or rat embryos. The Wheaton Mini Bottle Roller Culture Apparatus accommodates bottles 38 to 60 mm in diameter, up to 240 mm long, with bottle speeds of 3 to 45 RPM (38 mm bottle) and 2 to 30 RPM (60 mm bottle). Additional decks available separately. See information on Deck Kit below. 3PECIlCATIONS Electrical Requirements: ............................ 100-240 VAC, 50/60 Hz, 14 watts Bottle Size Accepted: ..................................38-60 mm x 240 mm (maximum) Bottle Speed: 38 mm Diameter Bottle ................................................... 3 to 45 RPM 60 mm Diameter Bottle ................................................... 2 to 30 RPM Dimensions: W x D x H .............12 1/4” x 12 3/4” x 7 1/8” (32 x 32.5 x 18 cm) Weight: ........................................................................................ 18 lb (8 kg) Maximum temperature for use: ........................................................... 40°C Warning: Use in a CO2 environment may reduce motor brush life.
3INGLE $ECK¬-INI¬"ENCH 4OP¬2OLLER¬#ULTURE¬3YSTEM Cat. No.
Plug Style
Voltage
Qty/Case
W348923-A W348923-B W348923-C W348923-D W348923-F W348923-G W348923-J
North America Japan Continental Europe United Kingdom Australia/China Italy/Chile India
120 VAC 100 VAC 230 VAC 230 VAC 240 VAC 230 VAC 230 VAC
1 1 1 1 1 1 1
This conventional-type roller culture rack is designed to roll vessels 108 to 121 mm in diameter and up to 290 mm long. The two outside rollers can be moved inward to accommodate bottles as small as 75 mm in diameter. Each deck can accommodate two vessels. Additional decks available separately. See information on Deck Kit below. 3PECIlCATIONS Electrical Requirements: .............................. 100-240 VAC, 50/60 Hz, 14 watts Bottle Size Accepted: ........................................... 108 to 121 mm (maximum) Bottle Speed: 110 mm Diameter Bottle ............................................. 0.1 to 3.8 RPM Dimensions: W x D x H ............ 12 1/4” x 12 3/4” x 7 1/8” (32 x 32.5 x 18 cm) Weight: ........................................................................................ 18 lb (8 kg) Maximum temperature for use: ............................................................. 40°C Warning: Use in a CO2 environment may reduce motor brush life.
3INGLE $ECK¬3MALL¬"ENCH 4OP¬2OLLER¬#ULTURE¬3YSTEM¬ Cat. No.
Plug Style
Voltage
Qty/Case
W348924-A W348924-B W348924-C W348924-D W348924-F W348924-G W348924-J
North America Japan Continental Europe United Kingdom Australia/China Italy/Chile India
120VAC 100 VAC 230 VAC 230 VAC 240 VAC 230 VAC 230 VAC
1 1 1 1 1 1 1
For more information on plug styles see page 188.
$ECK¬+IT¬ Small Bottle Deck Kit can be added to Small Bottle Roller Culture Apparatus to accommodate an additional two bottles per deck. Can add up to a maximum of 2 kits per unit. Weight: 9 lb (4.1 kg)
For more information on plug styles see page 188.
$ECK¬+IT¬ Mini Bottle Deck Kit can be added to Mini Bottle Roller Culture Apparatus to accommodate an additional four bottles per deck. Can add up to a maximum of 2 kits per unit. Weight: 9 lb (4.1 kg) Cat. No.
Description
W348920-CH
Deck Kit for Mini Bottle Bench-Top Roller Rack
WHEATON
Use with glass roller bottles Accomodates larger roller bottles Small footprint Conforms to UL, CSA, and CE Standards 1 year warranty
Cat. No.
Description
W348930-CH
Deck Kit for Small Bottle Bench-Top Roller Rack
Qty/Case
1
1.800.225.1437 (U.S. & Canada only) | +1.856.825.1100 | +1.856.825.1368 (F) | www.wheatonsci.com
Qty /Case
1
59
#ELL¬#ULTURE (IGH¬#APACITY¬2OLLER¬#ULTURE¬!PPARATUS #OST¬"USTER¬
2 04-¬¬¬¬¬¬¬¬¬¬¬
-ODULAR¬,INE¬
The Original High Volume Production Apparatus
Superior Product Designed to Maximize Production Spacing
Cost Buster¬ Number of Bottle Positions
The State of the Art High Volume Production Roller Apparatus
Modular Line¬
5 or 8
R2P Roller System¬¬¬¬¬¬¬¬
5
5 or 8
Distance Between Decks
Production Spacing 6” (15.2 cm)
Modular Spacing 7 1/8” (18.1 cm)
6 in (15.24 cm) Production spaced (available in 5 or 8 positions per deck) 7 1/8 in (18.1 cm) Modular spaced (available in 5 positions per deck)
Number of Decks
11
1 to 9 (easily modified)
1 - 9 (7 1/8 in. (18.1 cm) Modular spaced-5 positions per deck) 1 - 11 (6 in (15.24 cm) Production spaced-5 positions per deck) 11 (6 in (15.24 cm) Production spaced-8 positions per deck)
Unit Height
Fixed
Adjustable based on number of decks
5 position models are adjustable based on number of decks 8 position model is fixed
Number of Bottles
52 (5 bottles/deck) with 01 (min) with 2 2 86 (8 bottles/deck 1700 cm 45 (max) 1700 cm bottle bottle 104 with 1 with 172 850 cm2 bottle 90 850 cm2 bottle
1 - 55 (for 5 positions/deck-production spaced) with 1700 cm2 1 - 45 (for 5 positions/deck-modular spaced) bottle with 1 - 110 850 cm2 bottle 1 - 90
Rotation Alarm
Optional
Optional
Standard
Battery Backup
Optional
Optional
Optional
Not Available
CART2 software
}
}
Control/Operating Not Available System
}
}
}
}
Please note that Roller Culture Apparatus is made to order and not returnable.
WHEATON
1.800.225.1437 (U.S. & Canada only) | +1.856.825.1100 | +1.856.825.1368 (F) | www.wheatonsci.com
¬
#ELL¬#ULTURE
60
#OST¬"USTER¬2OLLER¬!PPARATUS¬ • • • • • • • • •
Maximum production capacity in a minimum amount of space Distance between decks is 6” (15.2 cm) Available in 52 and 86 position models Drive units mounted on top to provide easy access for maintenance and better air flow Optional rotation alarm and battery backup systems available Greaseless bearings prevent leaching and eliminate bearing seizures Soft start feature minimizes cell disruption Conforms to UL, CSA, and CE Standards 1 year warranty
The Wheaton Cost Buster High Volume Production Roller Apparatus provides the maximum amount of potential cell culture growth area available in the smallest amount of space. This is accomplished by reducing the spacing between decks. Controls and drive units are located on top of the unit, providing easy access for maintenance. The open frame design allows better air flow, which minimizes top-to-bottom temperature gradients. Wheaton Cost Busters can accommodate roller bottles from 110 to 121 mm in diameter and up to 550 mm in length. Each roller is driven by nonslip belts and pulleys for positive traction (especially important for use with lightweight plastic bottles). The Cost Buster High Volume Production Roller Apparatus is supplied without roller bottles.
Cat. No.
Plug Style
Voltage
Qty/Case
52-Position Cost Buster 349000-A 349000-B 349005-C 349005-D 349005-F 349005-G W349005-J
Cat. No.
Specifications: Electrical: .......100 - 120VAC, 50/60Hz, 35 watts ........................220 - 240VAC, 50/60Hz, 35 watts Bottle Speed: ....0.25 – 5.3 RPM (110 mm bottle) Operating Temp.: ..............................15 to 40°C Humidity: .................................. 80% up to 31°C Altitude Limit: ................................ 2000 meters Dimensions W x D X H: 52-Position: ...............30.9 x 24.3 x 74.5 (in) 52-Position: ...........78.4 x 61.6 x 189.4 (cm) 86-Position: ...............46.7 x 24.3 x 74.6 (in) 86-Position: .........118.7 x 61.6 x 189.4 (cm) Weight: 52-Position: ...................... 250 lb (113.4 kg) 86-Position: ...................... 350 lb (158.8 kg)
Plug Style
Voltage
Qty/Case
120 VAC 100 VAC 230 VAC 230 VAC 240 VAC 230 VAC 230 VAC
1 1 1 1 1 1 1
86-Position Cost Buster
North America Japan Continental Europe United Kingdom Australia/China Italy/Chile India
120 VAC 100 VAC 230 VAC 230 VAC 240 VAC 230 VAC 230 VAC
1 1 1 1 1 1 1
Offered with 7 standard electrical plug choices. Additional configurations are available through special order.
348990-A 348990-B 348995-C 348995-D 348995-F 348995-G W348995-J
North America Japan Continental Europe United Kingdom Australia/China Italy/Chile India
For more information on plug styles see page 188.
/PTIONAL¬!CCESSORIES¬FOR¬THE¬#OST¬"USTER¬ ¬-ODULAR¬2OLLER¬!PPARATUS "ATTERY¬"ACKUP¬3YSTEM
2OTATION¬!LARM¬3YSTEM
• Protects cells during power outages • Provides a minimum of 24 hours of auxiliary power • Can be used to rotate vessels during transport to harvest area
• Monitors drive system • Alarm sound if any failure is detected • Alarm is visual & audible
Protects your cells and process! The Wheaton Battery Backup System is designed to be installed in either the Modular or Cost Buster Roller Culture Apparatus. The system monitors the AC power and automatically switches between battery power and AC power as needed. The system will provide 24 hours of auxiliary power to the motor. This system can be used to rotate the roller vessels during transport to and from the warm room or incubator. The system consists of two long-life sealed batteries, an automatic charger system, and an independent speed control which can be preset to maintain a bottle speed of approximately 25% of full speed during the lose of the primary voltage.
The Wheaton Rotation Alarm System is designed to monitor the drive system on the Modular and Cost Buster Production Roller Culture Apparatus. When the system detects a failure it alarms. The alarm is visual (flashing LEDs), audible (loud buzzer), and can be tied into an existing equipment monitoring system through the external jack. The alarm system is installed in the Roller Culture Apparatus.
Charger Specifications:
!LARM¬)NDICATOR¬3PECIlCATIONS Visual: ............................................................ 3 LED indicators flash on and off Audible: ....................................................................................... Loud buzzer Remote signal: ...................................................... 4 pin panel mount mic jack
Recharge time is 8 hours for discharged batteries, shorter for partially discharged batteries. Charger automatically monitors temperature and adjusts charge voltage for correct charging levels at elevated incubator temperatures.
Alarm outputs: ....... Pulsating +12VDC (25ma), Dry contact closure .5A at 24VDC
Cat. No.
349011 349013
Description
Qty/Case
Factory Installed (Must be ordered with Roller Culture Apparatus) 349017
Battery Backup System for Modular Cell & Cost Buster Roller Apparatus
1
Field Retrofittable Battery Backup System Same as above except packaged for field installation on Wheaton Modular and Cost Buster Production Roller Culture Apparatus which conforms to UL, CSA & CE standards.
349018
Battery Backup System for Modular Cell & Cost Buster Roller Apparatus
1
Cat. No.
Description
Qty/Case
Factory Installed (Must be ordered with Roller Culture Apparatus) Rotation Alarm System Modular Cell Production Roller Apparatus Rotation Alarm System for Cost Buster Production Roller Apparatus
Field Retrofittable Rotation Alarm System Same as above except packaged for field installation on Wheaton Modular & Cost Buster Production Roller Culture Apparatus which conforms to UL, CSA & CE standards.
349014 349016
Rotation Alarm System for Modular Roller Culture Apparatus Rotation Alarm system for Cost Buster Production Roller Culture Apparatus
For Incubators for your Roller Culture Apparatus see page 64.
WHEATON
1 1
1.800.225.1437 (U.S. & Canada only) | +1.856.825.1100 | +1.856.825.1368 (F) | www.wheatonsci.com
1 1
61
#ELL¬#ULTURE -ODULAR¬#ELL¬0RODUCTION¬2OLLER¬!PPARATUS¬ • • • • • •
1 five-position base unit and up to 8 additional five position decks Distance between decks 7 1/8” (18.1 cm) Provides up to 75,000 cm2 total surface area for cell growth Greaseless bearings prevent leaching and eliminate bearing seizures Optional rotation alarm and battery backup systems available All-position drive is standard allowing the use of glass or plastic roller bottles • Conforms to UL, CSA and CE Standards • 1 year warranty
The Wheaton Modular Cell Production Roller Culture Apparatus allows flexibility for scale-up and production of monolayer cell cultures in standard roller bottles. It accepts bottles from 108 to 121 mm in diameter and up to 550 mm in length. The system consists of a base drive unit and five-position roller deck to which additional roller decks can be added. A powerful DC motor, with soft-start speed control, drives the bottles through a series of durable nonslip belts. The all-position drive model is a positive traction drive system for lightweight plastic bottles in which each roller is individually driven. Also included is a locking speed control knob that prevents accidental change in rotation rates.
Specifications: Electrical: ........100 - 120VAC, 50/60Hz, 35 watts .....................220 - 240VAC, 50/60Hz, 35 watts Bottle Speed: .....0.25 – 5.3 RPM (110 mm bottle) Operating Temperature: ....................15 to 40°C Humidity: ................................... 80% up to 31°C Altitude Limit: ................................. 2000 meters Dimensions W x D x H: Base with 1 Deck: .....29.75 x 24.375 x 13.5 (in) 75.7 x 63.0 x 34.3 (cm) Base with 9 Decks: ...29.75 x 24.375 x 70.5 (in) 75.6 x 63 x 179 (cm) Weight: Base with 1 Deck: ...................... 70 lb (31.8 kg) Base with 9 Decks: ................... 238 lb (108 kg) Additional Decks: ....................... 21 lb (19.5 kg)
This unit is available with one of seven standard electrical plugs shown. Additional configurations are available through special ordering. Contact Wheaton for more information. The Modular Cell Production Apparatus is supplied without roller vessels. Shipping Unit: One per case Cat. No.
Plug Style
Voltage
Base with 1 Deck - 5 Bottle Positions 348960-A 348960-B 348970-C 348970-D 348970-F 348970-G W348970-J
North America Japan Continental Europe United Kingdom Australia/China Italy/Chile India
120 VAC 100 VAC 230 VAC 230 VAC 240 VAC 230 VAC 230 VAC
North America Japan Continental Europe United Kingdom Australia/China Italy/Chile India North America Japan Continental Europe United Kingdom Australia/China Italy/Chile India
Voltage
348963-A 348963-B 348973-C 348973-D 348973-F 348973-G W348973-J
North America Japan Continental Europe United Kingdom Australia/China Italy/Chile India
348964-A 348964-B 348974-C 348974-D 348974-F 348974-G W348974-J
North America Japan Continental Europe United Kingdom Australia/China Italy/Chile India
120 VAC 100 VAC 230 VAC 230 VAC 240 VAC 230 VAC 230 VAC
348965-A 348965-B 348975-C 348975-D 348975-F 348975-G W348975-J
North America Japan Continental Europe United Kingdom Australia/China Italy/Chile India
Plug Style
348966-A 348966-B 348976-C 348976-D 348976-F 348976-G W348976-J
North America Japan Continental Europe United Kingdom Australia/China Italy/Chile India
348967-A 348967-B 348977-C 348977-D 348977-F 348977-G W348977-J
North America Japan Continental Europe United Kingdom Australia/China Italy/Chile India
348968-A 348968-B 348978-C 348978-D 348978-F 348978-G W348978-J
North America Japan Continental Europe United Kingdom Australia/China Italy/Chile India
0OSITION¬$ECK The 5-Position Deck allows you to add one 5-position deck to your Modular Cell Production system. Specifications: Weight: ............................................................................................. 21 lb (9.5 kg) Dimensions W x D x H: ............ 29 3/4 x 24 3/8 x 7 1/8 in (75.6 x 62.9 x 18.1 cm) Description
348969
5-Position Deck
Qty/Case
1
For Glass Roller Bottles see page 15.
Please note that Roller Culture Apparatus is made to order and not returnable.
WHEATON
120 VAC 100 VAC 230 VAC 230 VAC 240 VAC 230 VAC 230 VAC 120 VAC 100 VAC 230 VAC 230 VAC 240 VAC 230 VAC 230 VAC
Base with 9 Decks - 45 Bottle Positions 120 VAC 100 VAC 230 VAC 230 VAC 240 VAC 230 VAC 230 VAC
!CCESSORIES
Cat. No.
Voltage
Base with 8 Decks - 40 Bottle Positions 120 VAC 100 VAC 230 VAC 230 VAC 240 VAC 230 VAC 230 VAC
Base with 6 Decks - 30 Bottle Positions 120 VAC 100 VAC 230 VAC 230 VAC 240 VAC 230 VAC 230 VAC
Cat. No.
Base with 7 Decks - 35 Bottle Positions
Base with 5 Decks - 25 Bottle Positions 120 VAC 100 VAC 230 VAC 230 VAC 240 VAC 230 VAC 230 VAC
Base with 3 Decks - 15 Bottle Positions 348962-A 348962-B 348972-C 348972-D 348972-F 348972-G W348972-J
Plug Style
Base with 4 Decks - 20 Bottle Positions
Base with 2 Decks - 10 Bottle Positions 348961-A 348961-B 348971-C 348971-D 348971-F 348971-G W348971-J
Cat. No.
1.800.225.1437 (U.S. & Canada only) | +1.856.825.1100 | +1.856.825.1368 (F) | www.wheatonsci.com
120 VAC 100 VAC 230 VAC 230 VAC 240 VAC 230 VAC 230 VAC
#ELL¬#ULTURE
62
2 0©¬2OLLER¬#ULTURE¬!PPARATUS • • • • • • • • • • •
Utilize from research to production Modular; add capacity and options as your requirements change From 5 to 55 positions per unit (holds 10 to 110 of the 850 cm2 vessels) Displays accurate RPM by entering vessel diameter Wide speed range brushless DC motor, 0.25 to 8.0 RPM Specifications: Programmable rotation direction, fixed or reversing Programmable soft-start and stop Electrical: .................100 - 240 VAC, 50/60Hz, 20 watts 10 program storage registers Bottle Dimensions Dia/L: 110 to 121 mm / up to 550 mm Optional temperature monitoring, one to four sensors per unit Optional battery backup Bottle Speed: .............. 0.25 – 8.0 RPM (110 mm bottle) CART2 ready! Optional software for monitoring controlling, Deck Spacing: inches (cm) & recording up to 255 units All Position Drive R2P .........................6 in (15.24 cm) • Multi-language display prompts. Choice of English, French, Modular R2P .................................7 1/8 in (18.1 cm) German, Italian, Portuguese, or Spanish • Conforms to UL, CSA and CE Laboratory Standards Operating Temperature: .............................. 15 to 40°C • 1 Year Warranty Humidity: ...................... 80% up to 31°C; 50% at 40°C
The Wheaton R2P Roller Culture Apparatus is designed to allow for the development and growth of cell culture from research to production quantities without having to change equipment and revalidate protocols. This is achieved by giving you more flexible controls and the ability to easily add options at any time. All R2P Roller culture units share the same motor, software, controls and controllers, which makes moving culture conditions between units fast and easy. All-Position Drive System Each roller is driven to allow for either glass or lighter-weight plastic roller culture vessels to be used.
Altitude Limit: ...........................................2000 meters Dimensions W x D x H: Base with 1 Deck: .................... 31 x 24.5 x 13.5 (in) 78.8 x 62.25 x 34.3 (cm) Base with 3 Decks: .................. 31 x 24.5 x 25.5 (in) 78.8 x 62.25 x 64.8 (cm) Base with 11 Decks: ................ 31 x 24.5 x 73.5 (in) 78.8 x 62.25 x 186.7 (cm) Extra Deck: ................................... 31 x 24.5 x 6 (in) 78.8 x 62.25 x 15.24 (cm)
User-Friendly Control Panel The large digital display and keypad allow for easy input and monitoring of the settings. The unit continually displays the bottle RPM setting and the actual bottle RPM. The display remains accurate with any size bottle Weight: (110 to 121 mm diameter) by entering the bottle diameter. The unit can be programmed to rotate in either Base with 1 Deck: …… .....................52 lb (23.6 kg) direction, and can reverse direction automatically at the time interval entered (better for roller bottles fluted Base with 3 Decks: ...........................85 lb (38.6 kg) along the longitudinal axis). The programmable soft start and stop feature avoids premature cell detachment. Base with 11 Decks: .......................217 lb (98.4 kg) The settings can be saved in one of the ten memory locations for easy recall later. Additional Deck: ................................16.5 lb (7.5 kg) Built-in Monitoring and Alarms The unit continuously monitors both the rotational speed and the drive train (the motor and belts). If the speed falls out of the entered tolerance or if the unit detects a loss of rotation, the unit displays an alarm, and sounds a loud buzzer. These alarms can also be tied to an existing monitoring system through an external jack. Optional features can be added at any time, including CART2 and battery backup.
2 0¬!LL¬0OSITION¬$RIVE¬6”(15.24 cm) Deck Spacing Cat. No.
Plug Style
Voltage
Qty/Case
120 VAC 100 VAC 230 VAC 230 VAC 240 VAC 230 VAC 230 VAC
1 1 1 1 1 1 1
120 VAC 100 VAC 230 VAC 230 VAC 240 VAC 230 VAC 230 VAC
1 1 1 1 1 1 1
120 VAC 100 VAC 230 VAC 230 VAC 240 VAC 230 VAC 230 VAC
1 1 1 1 1 1 1
Base with 1 Deck - 5 Bottle Positions W348880-A W348880-B W348880-C W348880-D W348880-F W348880-G W348880-J
North America Japan Continental Europe United Kingdom Australia/China Italy/Chile India
Base with 3 Decks - 15 Bottle Positions W348881-A W348881-B W348881-C W348881-D W348881-F W348881-G W348881-J
North America Japan Continental Europe United Kingdom Australia/China Italy/Chile India
Base with 11 Decks - 55 Bottle Positions W348882-A W348882-B W348882-C W348882-D W348882-F W348882-G W348882-J
North America Japan Continental Europe United Kingdom Australia/China Italy/Chile India
Additional Deck for R2P All Position Drive W348888 W348889
R2P 5-Position Deck, Factory-Installed (must be ordered with unit) R2P 5-Position Deck, for Customer Installation
Built-in Drive Monitoring System Alarm Visual: ............... Flashing display with fault displayed Audible: ..........................Buzzer (with On/Off control) External output: ........... NO or NC (programmable) dry contact (0.5A@ 24 VDC) through RJ-45 jack on the control housing front panel.
-ODULAR¬2 0¬3YSTEM¬7 1/8” (18.1 cm) Deck Spacing Cat. No.
Plug Style
Voltage
Qty/Case
120 VAC 100 VAC 230 VAC 230 VAC 240 VAC 230 VAC 230 VAC
1 1 1 1 1 1 1
120 VAC 100 VAC 230 VAC 230 VAC 240 VAC 230 VAC 230 VAC
1 1 1 1 1 1 1
Base with 3 Decks - 15 Bottle Positions W348884-A W348884-B W348884-C W348884-D W348884-F W348884-G W348884-J
North America Japan Continental Europe United Kingdom Australia/China Italy/Chile India
Base with 9 Decks - 45 Bottle Positions W348885-A W348885-B W348885-C W348885-D W348885-F W348885-G W348885-J
North America Japan Continental Europe United Kingdom Australia/China Italy/Chile India
Additional Deck for Modular R2P W348886 W348887
R2P 5-Position Deck, Factory-Installed (must be ordered with unit) R2P 5-Position Deck, for Customer Installation
For more information on plug styles see page 188.
See page 63 for the 88-Position R2P System and R2P Accessories.
1 1
Please note that Roller Culture Apparatus is made to order and not returnable.
WHEATON
1.800.225.1437 (U.S. & Canada only) | +1.856.825.1100 | +1.856.825.1368 (F) | www.wheatonsci.com
1 1
#ELLÂŹ#ULTURE
63
0OSITION2 0Š3YSTEM v CM $ECK3PACING • Highest capacity roller rack • 88 all position drive • 1 year warranty
This unit features 6 in (15.24 cm) production spacing between the decks and holds 8 bottles/per deck. It will not ďŹ t in standard incubators, but it will pass through standard doorways for warm rooms. SpeciďŹ cations: Dimensions W x D x H: .....................47 x 24.5 x 73.5 in (119.4 x 62.25 x 189.2 cm) Weight: ........................................................................................ 360 lb (163.6 kg) Cat. No.
Plug Style
Voltage
Qty/Case
120 VAC 100 VAC 230 VAC 230 VAC 240 VAC 230 VAC 230 VAC
1 1 1 1 1 1 1
Base with 11 Decks - 88 Bottle Positions W349020-A W349020-B W349020-C W349020-D W349020-F W349020-G W349020-J
North America Japan Continental Europe United Kingdom Australia/China Italy/Chile India
Please note that Roller Culture Apparatus is made to order and not returnable.
!CCESSORIESÂŹFORÂŹ2 0 #!24 ÂŹANDÂŹ6IEWÂŹ,OGÂŹ3OFTWAREÂŹWITHÂŹTHEÂŹ.ETWORKÂŹ)NTERFACE Network Interface is a single-line network adapter for up to 255 R2P units.
CART2 Screen Shot
Cat. No.
Plug Style
Voltage
Qty/Case
W348902-A W348902-B W348902-C W348902-D W348902-F W348902-G W348902-J
North America Japan Continental Europe United Kingdom Australia/China Italy/Chile India
120 VAC 100 VAC 230 VAC 230 VAC 240 VAC 230 VAC 230 VAC
1 1 1 1 1 1 1
"ATTERY"ACKUP/PTION • Protects cells during power outages • Provides a minimum of 18 hours of auxiliary power • Can be used to rotate vessels during transport to harvest area CART2 Screen Shot
#!24 #ONTROL-ONITORAND2ECORDING3OFTWARE • • • • • • •
Remotely monitors and controls up to 255 R2P units Records all settings, changes, alarms, and communication loss Password-protected user levels maintain security Can be easily added to R2P at any time Works with WindowsÂŽ based software Computer Requirements: IBM Pentium PC or compatible Conforms to UL, CSA and CE Laboratory Standards
The Wheaton CART2 System precisely controls rotating speeds of up to 255 separate roller units. Each unit is monitored for rotation, speed deviation and communication. This system provides the perfect solution for GMP or FDA requirements.
The system monitors the AC power and automatically switches to battery if AC power fails. Provides auxiliary power to maintain complete functionality of the R2P unit for a minimum of 18 hours at full capacity. The audible alarm and display backlight will not function during battery power mode. Cat. No.
Description
W348899 W348898
Customer Installed Factory Installed (Must be ordered with R2P Roller Culture Apparatus)
Cat. No.
Description
W348891 W348890
Customer Installed Factory Installed (Must be ordered with R2P Roller Culture Apparatus)
IBM Pentium PC or compatible 32 MB of RAM, minimum Microsoft WindowsÂŽ 2000, XP One free serial port 10 MB of free hard drive space, minimum
WHEATON
1 1
4EMPERATUREÂŹ-ONITOR
#OMPUTER2EQUIREMENTS • • • • •
Qty/Case
1.800.225.1437 (U.S. & Canada only) | +1.856.825.1100 | +1.856.825.1368 (F) | www.wheatonsci.com
Qty/Case
1 1
#ELL¬#ULTURE
64
3TANDARD¬ ¬#/ ¬)NCUBATORS
• Designed specifically for use with Wheaton Roller Culture Apparatus • No lifting ramps in standard incubator. CO2 incubator has light weight ramps. • 40 cubic feet (1.1 m3) of space, fits: • Production-Spaced R 2P unit (6 in (15.24 cm) between decks) with up to 11 decks • Modular-Spaced R 2P unit (7 1/8 in (18.1 cm) between decks) with up to 9 decks • 52-Position Cost Buster • Independent over-temperature safety protection • Viewing window in the door • Four internal electrical outlets for accessories • Can also be used for suspension cultures • Available as standard or CO2 incubator • Conforms to UL, CSA, and CE Standards • 1 Year Warranty A convenient, space-saving and economical alternative to a warm room for small production runs. Designed to hold full-size units, it can be used in combination with the optional shelves to accommodate spinner flasks, rocker tables, and other types of equipment. Double-walled construction provides for temperature stability and easy cleaning. Shelves are not supplied with incubator.
Specifications: Specifications are for Standard & CO2 Incubators unless specified otherwise
ELECTRICAL / ELECTRONICS: Requirements: ......................................................... 120-240 VAC, 1500 watts Power Switch: .................................................................. On/Off rocker switch Temperature Keypad: ................................... Digital indicator & actuator keypad AC Receptacles: ...................... Four internal (customized for voltage differences) Heating Light Heaters: .............................................................................. One Setting maintained if power is interrupted: Circuit Breaker: ................................ None on CE Units (CE units include fuse) Failsafe Feature: Secondary mechanical high limit thermostat with indicator light TEMPERATURE: Heat: .................................. Forced-air circulation with digital temperature control Temperature Range: ............................... Ambient +8 to 70°C (empty incubator) Temperature Uniformity: .......................... to ±0.5°C @ 37°C (empty incubator) Sensitivity: Standard Incubator: ...........................................................................±0.1°C CO2 Incubator: ...................................................................................... ±0.1°C DIMENSIONS: Capacity: ..............................................................................40 cubic feet (1.1 m3) Dimensions W x D x H: Interior: .........................................................35 x 26 x 76" (89 x 66 x 193 cm) Exterior: ................................................ 41 x 34 x 87" (104.2 x 86.4 x 221 cm) Weight: Net Weight: .............................................................................730 lb (331 kg) Shipping Weight: ......................................................................850 lb (386 kg)
CONSTRUCTION: External: ......................................................................................Painted Steel Internal: Standard ..................................................................................Painted Steel CO2 ........................................................................................Stainless Steel Door Weight: ................................................................................ 75 lb (34 kg)
Cat. No.
Recommend not blocking perforated shelf surface by more than 60% to allow adequate air flow.)
753680 W753684-C-E W753684-D-E W753684-F-E W753684-G-E W753684-J-E
Thermal Factor: ........................................................................................R13
CO2 Incubator
Accept standard cleaning chemicals
I057606 WI057606-C-E WI057606-D-E WI057606-J-E
Shelf Weight Maximum: .............................................................. 80 lb (36 kg) Shelves Per Unit Maximum: .......................................12 Shelves (sold separately)
CO2 GAS: Gas shuts off when door is opened or switch is turned off CO2 Connection: ........................................................1/4" (6.35 mm) hose barb CO2 Concentration Range: .....................0-20% adjustments in 0.1% increments CO2 Pressure to Indicator Inlet: ..................Rated @ 5-40 psi (0.345-2.76 bars) not to exceed 40 psi (2.76 bars) CO2 Recovery time When Door is Opened and Closed: 10 Second Opening ..................................................................Instantaneous 30 Second Opening ..................................................................... 10 minutes WHEATON
Plug Style
Voltage
Qty/Case
North America Continental Europe United Kingdom Australia/China Italy/Chile India
120 VAC 230 VAC 230 VAC 240 VAC 230 VAC 230 VAC
1 1 1 1 1 1
North America Continental Europe United Kingdom India
120 VAC 230 VAC 240 VAC 230 VAC
1 1 1 1
Standard Incubator
For more information on plug styles see page 188.
Incubator Shelves (Not supplied with incubators) Cat. No.
Description
753685 WI056028
Shelf for Standard Incubator Shelf, Stainless Steel for CO2 Incubator
1.800.225.1437 (U.S. & Canada only) | +1.856.825.1100 | +1.856.825.1368 (F) | www.wheatonsci.com
Qty/Case
1 1
#HEMISTRY¬'LASSWARE
65
!DAPTERS¬ ¬#ONNECTORS
#LAMPS ¬3TANDARD¬4APER¬ These color-coded clamps hold standard taper joints securely under moderate pressure. Molded from polyoxymethylene (POM), an acetal resin, the clamps will not scratch glass and can withstand temperatures up to 150°C. These clamps are resistant to bases and weak acids; they are not resistant to halogen gases and concentrated acids. Cat. No
Standard Taper Joint Size
Color
297746 297749 297752 297755 297757
14 19 24 29 Assorted
Yellow Blue Green Red Assorted
Adapters & Connectors ..................................................... 65 - 66 Chemistry Glassware ........................................................ 67 - 69 Chemistry Kits ................................................................. 70 - 72 Desiccators ..................................................................... 73 - 74 Filtration Apparatus .......................................................... 75 - 80 Solids Determination ............................................................... 82 Weighing Dishes ..................................................................... 82
T
his section consists of analytical apparatus that are commonly used in organic chemistry and the examination of environmental samples. The majority of the glassware in this section is fabricated with either our exclusive Clear-Seal® joints or the Wheaton Connection® screw thread finish ends. The smooth, unground Clear-Seal joints seal without grease, reducing the possibility of seizing. Clear-Seal joints are manufactured to American Standard Taper dimensions and can be used interchangeably with ground joints. However, when Clear-Seal joints are used exclusively, there is little chance of freezing and no chance of contamination or mess as with other sealing methods. The Wheaton Connection basic design links two exterior-threaded glass components. The connection eliminates grease and the contamination that is commonly associated with ground joints. Also eliminated are clamps, hooks and springs. Durable polypropylene caps, high temperature phenolic caps, and Teflon® faced silicone rings ensure a tight, inert seal. Lab safety is increased by completely preventing frozen joints.
• Inert contact surface • Easy to assemble • Leak-tight, positive connections
The Wheaton Connection® safely joins two exterior threaded glass components without hooks, springs or clamps. The screw cap configuration creates a greasefree, vacuum-tight seal. This connection can be used under moderate pressure to generate a gas or deliver a reagent under an inert atmosphere. It is available with white polypropylene or black phenolic caps. The Wheaton Connection® may be autoclaved and is used in the Wheaton Micro Kit® catalog number 774600 and Wheaton Semi-Micro Kit® catalog number 774650. The Wheaton Connections® made from phenolic have a working temperature of up to 180°C. Cat. No.
Screw Thread Size
Qty/Case
With White Polypropylene Cap 125478 125480 125482 125486 125488 125504
13-425 and 13-425 13-425 and 20-400 13-425 and 24-400 20-400 and 20-400 20-400 and 24-400 24-400 and 24-400
6 6 6 6 6 6
13-425 and 13-425 13-425 and 20-400 13-425 and 20-400 13-425 and 24-400 20-400 and 20-400 20-400 and 24-400 24-400 and 24-400
6 6 6 6 6 6 6
With Black Phenolic Cap 125492 125494 W125495 125496 125497 125499 125500
&OR¬ADDED¬SAFETY¬IN¬THE¬LAB use Wheaton's Safety Coated Bottles when storing reagents and chemicals. See page 16.
WHEATON
12 12 12 12 24
4HE¬7HEATON¬#ONNECTION ¬¬ 3CREW¬4HREAD¬#ONNECTOR
#HEMISTRY¬'LASSWARE • • • • • • •
Qty/Case
1.800.225.1437 (U.S. & Canada only) | +1.856.825.1100 | +1.856.825.1368 (F) | www.wheatonsci.com
#HEMISTRY¬'LASSWARE
66
#LEAR 3EAL ¬¬ 'REASE &REE¬)NNER¬*OINTS¬ These joints are formed from a unique wall tubing that is heavier than standard wall tubing for extra strength. They’re manufactured from Wheaton 33 low extractable borosilicate glass that conforms to USP Type I and ASTM E-438 Type I, Class A requirements.
#LEAR 3EAL ¬#ONNECTING¬!DAPTER These adapters enable interfacing between standard semi-micro glassware and micro systems, with a Clear-Seal inner joint on one end and a screw thread for the Wheaton Connection® on the other end. The 13-425 thread size comes with a screw cap and an “O” ring to seal thermometers, gas inlet tubes, etc. An optional thermometer adapter (Cat. No. 165996) is offered for the 20-400 size. The Clear-Seal Connecting Adapter is made with Wheaton 33 low extractable borosilicate glass that conforms to USP Type I and ASTM E-438 Type I, Class A requirements. Cat. No.
Screw Thread Size
Standard Taper Joint
139479 139506 139509 139513
13-425 20-400 20-400 20-400
19/22 14/20 19/22 24/40
Cat. No.
Standard Taper Joint
OD (mm)
757766 757769 757770 757772 757773 757775 757776
14/20 19/22 19/38 24/25 24/40 29/26 29/42
12 17 17 21 21 26 26
Qty/Case
6 6 6 6 6 6 6
#LEAR 3EAL ¬¬ 'REASE &REE¬/UTER¬*OINTS¬
Qty/Case
1 1 1 1
These joints are formed from a unique wall tubing that is heavier than standard wall for extra strength. They are manufactured from Wheaton 33 low extractable borosilicate glass that conforms to USP Type I and ASTM E-438 Type I, Class A requirements.
Cat. No.
Standard Taper Joint
OD (mm)
758966 758969 758970 758972 758973 758976
14/20 19/22 19/38 24/25 24/40 29/42
18 22 22 28 28 33
Qty/Case
6 6 6 6 6 6
#LEAR 3EAL ¬/UTER¬*OINTS¬ This unit features a Clear-Seal outer joint on one end and a screw thread for the Wheaton Connection® on the other end. It’s ideal for connection to rotary evaporators, V Vials®, one-dram vials, as well as many other types of vials. The joint is pictured here with the Wheaton Connection® and a V Vial® (both not included). It’s made with Wheaton 33 low extractable borosilicate glass that conforms to USP Type I and ASTM E-438 Type I, Class A requirements. Cat. No.
Screw Thread Size
Standard Taper Joint
139626 139629 139633 139656 139663
13-425 13-425 13-425 20-400 20-400
14/20 19/22 24/40 14/20 24/40
For BOD Bottles, see pages 3-4.
Qty/Case
1 1 1 1 1
4HERMOMETER¬!DAPTER¬ This adapter has an “O” ring which holds a thermometer or gas inlet tube securely. A grease-free Wheaton Connection® on one end provides an inert connection with exterior-threaded glass components. This adapter can also be used with gas inlet tubing, etc., and will accommodate any tube with an OD of 5 to 7 mm. Cat. No.
Screw Thread Size
165996
20-400
For Bottle Top Dispensers, see pages 99-100.
WHEATON
1.800.225.1437 (U.S. & Canada only) | +1.856.825.1100 | +1.856.825.1368 (F) | www.wheatonsci.com
Qty
1
67
#HEMISTRYÂŹ'LASSWARE !RSINEÂŹ'ENERATOR ÂŹ-ODIlEDÂŹ
!RSINEÂŹ'ENERATORS
WITHÂŹ/NE 0IECEÂŹ3CRUBBER !BSORBERÂŹ5NIT
!RSINEÂŹ'ENERATOR This apparatus is used for arsenic analysis using silver diethyldithiocarbamate (SDDC) colorimetric method described in the 21st Edition (2005) of Standard Methods for the Examination of Water and Wastewater, Method 3500-As B. This design eliminates the ball and socket joint connecting the scrubber and absorber components. The assembled apparatus is freestanding and easy to use. It is manufactured from Wheaton 33 low extractable borosilicate glass that conforms to USP Type I and ASTM E-438 Type I, Class A requirements.
Cat. No.
Description
Qty/Case
180030
Arsine Generator, Complete
1
Component Parts 180034 635965 357331 297746 297752 970440
Scrubber Absorber Tube Reaction Flask, 200 mL, 24/40 Joint Short Disposable Pasteur Pipettes (146 mm long) Clamp, Acetal Resin, Size 14, Yellow Clamp, Acetal Resin, Size 24, Green Drying Tube, 14/20 Joint
This is a modiďŹ ed version of catalog number 180020 for arsine analysis eliminating the cumbersome ball and socket joint connecting the scrubber and absorber tubes which conforms to ASTM/USP and EPA speciďŹ cations. The freestanding system has a standard taper 24/40 Clear-SealÂŽ joint. This unit is manufactured from Wheaton 33 low extractable borosilicate glass that conforms to USP Type I and ASTM E-438 Type I, Class A requirements. Reference: “Standard Test Method for Arsenic in Water,â€? ASTM D2972-03. Cat. No.
Description
180023
Arsine Generator, ModiďŹ ed, Complete
Qty/Case
1
Scrubber Absorber Tube Erlenmeyer Flask, 125 mL, 24/40
1 1
Component Parts 180024 635926
ÂŹ #YANIDEÂŹ$ISTILLATIONÂŹ+ITS
1 1 1000 12 12 1
!RSINEÂŹ'ENERATOR ÂŹÂŹ #LEARÂŹ3EALš*OINT WITHÂŹ3TANDARDÂŹ4APERÂŹ ÂŹ #LEAR 3EALÂŹ*OINT This generator was engineered for arsine analysis using the silver diethyldithiocarbamate (SDDC) colorimetric method (meets ASTM/USP and EPA speciďŹ cations). The arsine absorber (Cat. No. 180021) has a socket joint, while the scrubber tube (Cat. No. 180022) has a standard taper 24/40 Clear-SealÂŽ joint and a spherical 12/2 ball joint held together by a size 12 stainless steel ball joint clamp. This unit is manufactured from Wheaton 33 low extractable borosilicate glass that conforms to USP Type I and ASTM E-438 Type I, Class A requirements. Reference: “Standard Test Method for Arsenic in Water,â€? ASTM D2972-97. Cat. No.
Description
180020
Arsine Generator, Complete
Qty/Case
1
Component Parts 180021 180022 635926 297784-12
Arsine Absorber Joint Arsine Scrubber Tube 24/40, 12/2 Joint Erlenmeyer Flask, 125 mL, 24/40 Clamp, Size 12/2, Stainless Steel
1 1 1 1
#YANIDEÂŹ$ISTILLATIONÂŹ+ITÂŹ 7ITHÂŹ#LEAR 3EALš*OINTS This unit is manufactured from Wheaton 33 low extractable borosilicate glass that conforms to USP Type I and ASTM E-438 Type I, Class A requirements. Use this kit for removing interfering substances in quantitative analysis for cyanide. The sample is reacted with H2SO4 and MgCl2, which converts any cyanide to HCN. HCN distills over and is absorbed in a NaOH solution, which is then analyzed for CN. The unit utilizes standard taper Clear-Seal joints. Reference: “Standard Test Method for Cyanides in Water,â€? ASTM D2036-06. Cat. No.
Description
377160
Cyanide Distillation Kit, Complete
1
Absorber Tube, 19/38 Absorber Top, 19/38 Cold Finger, 29/42 Cold Finger Jacket, 29/42 Flask, 1000 mL, 19/38 Inlet Tube, 19/38
1 1 1 1 1 1
Component Parts 377161 377162 377163 377164 377165 377166
Use the Wheaton TCLP Extraction Bottle to determine if any of 40 contaminants is in waste materials. See page 5 for ordering information.
WHEATON
Qty/Case
1.800.225.1437 (U.S. & Canada only) | +1.856.825.1100 | +1.856.825.1368 (F) | www.wheatonsci.com
#HEMISTRY¬'LASSWARE
68
$IAZOMETHANE¬'ENERATOR¬ Use this unit to generate diazomethane and other gases for gas chromatography, mass spectroscopy, and NMR studies using one millimole of nitrosoguanidine (MNNG). It comes complete with an “O” ring clamp, a 13-425 screw cap with a cut-out top and a Teflon® faced rubber liner. The generator is made from Wheaton 33 low extractable borosilicate glass that conforms to USP Type I and ASTM E-438 Type I, Class A requirements. Note: Please use a safety shield and efficient fume hood when generating diazomethane or similar gases. Cat. No.
Description
281155 281158 W240593
Diazomethane Generator, Complete “O” ring for Cat. No. 281155 13 mm Teflon® Faced Butadiene Septa
200
Qty/Case
1 12 100
¬ +UDERNA¬$ANISH¬#ONCENTRATORS
#YANIDE¬$ISTILLATION¬+IT¬WITH¬3CRUBBER¬ 7ITH¬#LEAR 3EAL ¬*OINTS This distillation kit, with sulfide removal, eliminates the interfering substances in quantitative analysis, therefore enabling compliance to procedures described by EPA 600/479/020, Method 335.2. The unit is manufactured from Wheaton 33 low extractable borosilicate glass that conforms to USP Type I and ASTM E-438 Type I, Class A requirements. Cat. No.
Description
377260
Cyanide Distillation Kit, Complete
1
Scrubber, with 29/42 Joints Absorber, with 29/42 Joints Cold Finger, 29/42 Cold Finger Jacket, 29/42 Flask, 1000 mL, 19/38 Inlet Tube, 19/38
1 1 1 1 1 1
%VAPORATIVE¬#ONCENTRATOR ¬¬ -ICRO¬+UDERNA $ANISH¬ 7ITH¬#LEAR 3EAL ¬*OINTS
Qty/Case
This evaporative concentrator is used for analyte concentration in organic solvents. The center flask is eliminated for better analyte retention. The unit consists of a three-chamber Snyder column, 10 mL receiving vessel, and an acetal standard taper clamp. It is manufactured from Wheaton 33 low extractable borosilicate glass that conforms to USP Type I and ASTM E-438 Type I, Class A requirements.
Component Parts 709882 709782 377163 377164 377165 377166
Approx Height (mm)
¬ $IAZOMETHANE¬'ENERATORS
Cat. No.
Description
297942
10 mL Concentrator, Complete
Qty/Case
1
Component Parts 297800 297749
10 mL Receiving Vessel 19/22 Clear-Seal® Joint (graduated 0-1 x 0.1 mL; 2-10 x 0.5 mL) Clamp, Acetal Resin, Size 19, Blue
1 12
%VAPORATIVE¬#ONCENTRATOR ¬¬ -ICRO¬+UDERNA $ANISH¬ 7ITH¬THE¬7HEATON¬#ONNECTION
281135
The small-scale Kuderna-Danish concentrator is engineered for analyte concentration in organic solvents prior to analysis. The Wheaton Connection® eliminates the need for hooks, springs, and ground joint clamps common to standard designs. The complete unit consists of 112 mm condenser, 40 mL flask, 2 mL receiving vessel, Wheaton Connection® 125478, and Wheaton Connection® 125486. All wetted parts are manufactured from Wheaton 33 low extractable borosilicate glass that conforms to USP Type I and ASTM E-438 Type I, Class A requirements or Teflon®.
281155
$IAZOMETHANE¬'ENERATOR¬ • With Standard Taper Clear-Seal® Grease-Free Joints
Use this unit to generate diazomethane and other gases for gas chromatography, mass spectroscopy, and NMR studies using one millimole of Nitrosoguanidine (MNNG). It features Clear-Seal® grease-free joints that have never been ground, and doesn’t require an “O” ring. This generator comes complete with a plastic standard taper joint clamp, a 13-425 screw cap with cut-out top and a Teflon® faced rubber liner. They are manufactured from Wheaton 33 low extractable borosilicate glass that conforms to USP Type I and ASTM E-438 Type I, Class A requirements. Note: Please use a safety shield and efficient fume hood when generating diazomethane or similar gases. Cat. No.
Description
281135 W240593
Diazomethane Generator, Complete 13 mm Teflon® Faced Butadiene Septa
Approx Height (mm)
WHEATON
190 —
Qty/Case
1 100
Cat. No.
Description
297770
Complete Unit
Qty/Case
1
Condenser, 112 mm, 20-400 Screw Thread 40 mL Flask, 13-425 and 20-400 Screw Threads 2 mL Receiving Vessel, 13-425 Screw Thread Wheaton Connection®, 13-425 to 13-425 Wheaton Connection®, 20-400 to 20-400
1 1 1 6 6
Component Parts 297771 297773 W297774 125478 125486
Accessories The following item is not included in the complete kit, but can be purchased separately. W297772
Micro Snyder Column, 158 mm, 20-400 Screw Threads
1.800.225.1437 (U.S. & Canada only) | +1.856.825.1100 | +1.856.825.1368 (F) | www.wheatonsci.com
1
69
#HEMISTRY¬'LASSWARE %VAPORATIVE¬#ONCENTRATOR ¬¬ +UDERNA $ANISH¬
3OXHLET¬%XTRACTION¬!PPARATUS
7ITH¬THE¬7HEATON¬#ONNECTION
-ICRO¬3OXHLET¬%XTRACTION¬!PPARATUS¬
This unit is designed for the concentration of trace amounts of analytes in an organic solvent prior to analysis. Wheaton Connections® eliminate the hooks, springs and clamps common to standard ground joint designs. The complete unit consists of 215 mm three-ball Snyder column, 500 mL flask, 10 mL receiving vessel, and two Wheaton Connections®. All threads are 20-400. All wetted parts are manufactured from either Wheaton 33 low extractable borosilicate glass that conforms to USP Type I and ASTM E-438 Type I, Class A requirements or Teflon®.
7ITH¬THE¬7HEATON¬#ONNECTION
Cat. No.
Description
297810
Kuderna-Danish Concentrator, Complete
Qty/Case
1
Component Parts 297811 297815 W297779 125486
Use this apparatus for continuous extraction of analytes from a solid into an organic solvent. The Wheaton Connection eliminates the need for hooks, springs and clamps common to standard ground joint designs. As the flask containing the solvent is heated, vapors rise in the larger outside tube, enter the water-cooled condenser, and liquate. When the liquid level in the extractor reaches the top of the bent tube, siphoning action returns the extract-enriched solvent to the flask. All wetted parts are manufactured from either Wheaton 33 low extractable borosilicate glass that conforms to USP Type I and ASTM E-438 Type I, Class A requirements or Teflon®.
Snyder Column, 215 mm, Three-Ball, 20-400 Flask, 500 mL, 20-400 Top, 20-400 Bottom 10 mL Receiving Vessel, with 20-400 Screw Thread (Graduated 0-1 x 0.1 mL; 2-10 x 0.5 mL) Wheaton Connection®, 20-400 to 20-400
1 1
Cat. No.
Description
415500
Micro Soxhlet Extractor, Complete
1 6
415501 415502
297814 297816
125486 125504 635134 962515 W416788
Flask, 250 mL, 20-400 Top, 20-400 Bottom Flask, 1000 mL, 20-400 Top, 20-400 Bottom
1 1
%VAPORATIVE¬#ONCENTRATOR ¬¬ +UDERNA $ANISH¬
Description
1 1 6 6 1 6 1
7ITH¬3TANDARD¬4APER¬'ROUND¬*OINTS
This unit is designed for the concentration of trace amounts of analyte in an organic solvent prior to analysis. The smooth Clear-Seal® joints eliminate the need for grease, reducing the possibility of contaminating the sample. The complete unit consists of 270 mm three-ball Snyder column, 500 mL flask, and 10 mL receiving vessel. This concentrator is manufactured from Wheaton 33 low extractable borosilicate glass that conforms to USP Type I and ASTM E-438 Type I, Class A requirements.
Kuderna-Danish Concentrator, Complete
85 mm Condenser, 24-400 Screw Thread on Bottom and 13-425 Screw Thread on Side Extractor, 24-400 Screw Thread on Top and 20-400 Screw Thread on Bottom Wheaton Connection® 20-400 to 20-400 Wheaton Connection® 24-400 to 24-400 25 mL Erlenmeyer Flask, 20-400 Screw Thread Hose Connector, 13-425 Extraction Thimble, Glass, 15 x 60 mm, 170-220 μm Porosity
3OXHLET¬%XTRACTION¬!PPARATUS¬
7ITH¬#LEAR 3EAL ¬*OINTS
297883
1
Component Parts
Accessories The following items are not included in the complete kit, but can be purchased separately
Cat. No.
Qty/Case
Use this apparatus for continuous extraction of analytes from a solid into an organic solvent. As the flask containing the solvent is heated, vapors rise in the larger outside tube, enter the water-cooled condenser, and liquate. When the liquid level in the extractor reaches the top of the bent tube, siphoning action returns the extract-enriched solvent to the flask. All wetted parts are manufactured from Wheaton 33 low extractable borosilicate glass that conforms to USP Type I and ASTM E-438 Type I, Class A requirements.
Qty/Case
1
Component Parts 384353 297825 297800
Snyder Column, 270 mm, Three-Ball, with 24/40 Clear-Seal® Joints 500 mL Flask, with 24/40 Top and 19/22 Bottom Clear-Seal® Joints 10 mL Receiving Vessel, with 19/22 Clear-Seal® Joint (Graduated 0-1 x 0.1 mL; 2-10 x 0.5 mL)
1 1 1
Cat. No.
Description
416000 416005 416010
125 mL Soxhlet Extractor, Complete 250 mL Soxhlet Extractor, Complete 500 mL Soxhlet Extractor, Complete
Qty/Case
1 1 1
Component Parts
4ECHNICAL¬!SSISTANCE Give us a call if you need technical assistance 1.800.225.1437 (U.S. & Canada Only) I +1.856.825.1100 Business hours: 8:00 AM to 5:00 PM EST in U.S.A.
WHEATON
415000 415005 415010 334003 334014 334025 428126 428146 428164
190 mm Extractor with 24/40 top inner joint and 34/45 bottom outer joint 205 mm Extractor with 24/40 top inner joint and 45/50 bottom outer joint 250 mm Extractor with 24/40 top inner joint and 55/50 bottom outer joint Allihn Reflux Condenser, 34/45 Allihn Reflux Condenser, 45/50 Allihn Reflux Condenser, 55/50 Flat-Bottom Flask, 125 mL, 24/40 Flat-Bottom Flask, 250 mL, 24/40 Flat-Bottom Flask, 500 mL, 24/40
1.800.225.1437 (U.S. & Canada only) | +1.856.825.1100 | +1.856.825.1368 (F) | www.wheatonsci.com
1 1 1 1 1 1 1 1 1
#HEMISTRYÂŹ'LASSWARE #HEMISTRYÂŹ+ITS
W
heaton Science Products innovative microscale kits provide many advantages over traditional macroscale glassware. The reduced quantity of chemicals required for experiments translates into less chemical waste disposal. Savings on waste disposal are realized by many universities, colleges and industrial laboratories. Exposure to toxic materials and their vapors have been virtually eliminated with the use of microscale glassware. Less solvent consumption affords better air quality and reduced risk of ďŹ re or explosion. Microscale users enjoy improved skills in chemistry with quicker setup times and shorter reaction times, allowing more time for experiments. The Wheaton ConnectionÂŽ, a threaded connector joining two glass pieces, eliminates the use of grease or joint clamps. The Wheaton ConnectionÂŽ is available with white polypropylene or black phenolic caps. The Wheaton ConnectionÂŽ allows the use of inexpensive Wheaton vials as single-use reaction asks, greatly reducing cleaning requirements. The vials are also used for the storage of intermediate compounds or ďŹ nal reaction products.
7HEATON-ICRO+ITšFOR/RGANICAND%NVIRONMENTAL#HEMISTRY 7ITH3TANDARD4APER #LEAR 3EALš*OINTS With Wheaton Kits, you get apparatus for a wide range of organic chemistry experiments at a lower price than if you purchase the components separately. Your purchasing department and stockroom will appreciate the convenience of ordering and issuing complete kits. Wheaton standard taper Clear-SealŽ grease-free joints provide smooth, unground surfaces, which seal without grease and reduce seizing and contamination from grease. Clear-Seal joints can replace ground units in any application; they also provide other important advantages over ground joints: • Superior in vacuum and radioactive applications. The smooth surfaces resist contamination. Cleaning is simple and thorough. • Interchangeable with ground joints. • Transparent mating surfaces. All chemical changes and thermometer scales remain visible through the joints. • Greater strength. Clear-Seal joints have never been weakened by grinding. In addition, Clear Seal joints are formed from special wall tubing that is heavier than standard wall for extra strength. • Manufactured from Wheaton 33 low extractable borosilicate glass that conforms to USP Type I and ASTM E-438 Type I, Class A requirements.
Clear-Seal joints are produced to American Standard Taper dimensions and can be used interchangeably with any standard taper ground joints. Enjoy Clear-SealÂŽ joints exclusively or couple them with ground joints and get maximum results. Wheaton Micro Kit catalog number 773900 is packed in a high-density polyethylene case with a foam insert to protect components against breakage. Cat. No.
Description
Qty Included in Kit
773900
Complete Kit
1
Replacement Part Qty/Case
—
1 1 1 1 1 1 1 1 1 1 1 1 1 1
1 1 1 1 1 1 1 1 1 1 1 1 1 12
Component and Replacement Parts 109933 123753 139479 168353 327342 385772 WF034088 WF034093 W438174 438764 438782 690170 923769 964453
Claisen Adapter Connecting Adapter Thermometer Adapter with “Oâ€? ring, 13-425 Cap Vacuum Distilling Adapter West Condenser, 200 mm Distilling Column, 200 mm Round-Bottom Flask, 25 mL Round-Bottom Flask, 50 mL Round-Bottom Flask, 100 mL Round-Bottom Flask, 250 mL Round-Bottom Flask, 500 mL Separatory Funnel with TeonÂŽ Stopcock, 125 mL Teon Stopper Bleed Tube
#ASEÂŹANDÂŹ)NSERTÂŹFORÂŹ7HEATONÂŹ+ITS High density polyethylene cases and foam inserts. Sold separately. Cat. No.
Description
774510 774515
Case for Micro Kit Cat. No. 773900 Foam insert for Micro Kit Cat. No. 773900
WHEATON
Qty/Case
6 6
1.800.225.1437 (U.S. & Canada only) | +1.856.825.1100 | +1.856.825.1368 (F) | www.wheatonsci.com
70
71
#HEMISTRY¬'LASSWARE 7HEATON¬-ICRO¬+IT ¬ 7ITH¬THE¬7HEATON¬#ONNECTION Wheaton is pleased to offer you a complete kit that performs all the functions of a standard taper kit and more, but on a true microscale! The Wheaton Micro Kit®, complete with greasefree Wheaton Connections®, simplifies many organic techniques and is helpful in synthesis and the study of reaction mechanisms. Microscale techniques, which are consistent with current analytical techniques, have the following important attributes: • Safe. Working on a microscale means less exposure to toxic and radioactive materials and possible carcinogens. • Environmentally friendly. Disposal problems are greatly reduced because fewer chemicals are needed. • Economical. The consumption of expensive chemicals can be cut drastically. • Breakage from frozen joints is eliminated. Disposable vials can be used for reaction vessels.
Components are assembled with grease-free, screw-threaded Wheaton Connections®. Wheaton Connections® that are made from phenolic have a working temperature of up to 180°C. All caps have open tops and Teflon® faced septa for maximum versatility. Flask sizes range from 1 mL to 10 mL. Graduated V Vials® with interior conical bottoms are included for reaction and collection vessels. The 1 mL V Vial is graduated at the 0.1 mL level. The compact design of Wheaton grease-free, microscale apparatus makes it possible to join components on a desktop. Viton® “O” rings are included in the kit for gas inlet tubes or thermometers. Because components hold themselves together, only minimal clamping is necessary. Cat. No.
Description
Qty Included in Kit
774600
Complete Kit
1
Replacement Part Qty/Case
—
1 4 1 2 1 1 1 1 2 1 5 2 2 2 2 1 2 2 1 2
1 6 6 6 1 1 40 1 1 1 30 6 6 6 6 12 12 12 1 1
Component and Replacement Parts 110008 125478 125480 962515 161978 168378 224952 333927 265318 265320 420836 434320 903007 903061 903063 W986294NG W986297NG W986299NG 620189 WF033112
Claisen Adapter, 13-425 Screw Threads Wheaton Connection®, 13-425 to 13-425 Wheaton Connection®, 13-425 to 20-400 Hose Connector, 13-425 Chromatography Connection,13-425 to 1/4 x 28 Vacuum Adapter, 13-425 and 20-400 Screw Threads 4 mL Vial with 13-425 Cap Water Jacketed Condenser, 13-425 Screw Threads Air Condenser, Drying Tube, Chromatography Column, 50 mm, 13-425 Screw Threads Air Condenser, Drying Tube, Chromatography Column, 100 mm, 13-425 Screw Threads Teflon® Filter with Support 10 mL Flask with 20-400 Cap Spin bars Spin Vanes for 1 mL V Vial Spin Vanes for 2, 3 and 5 mL V Vials 1 mL Graduated V Vial with 13-425 Cap 3 mL Graduated V Vial with 20-400 Cap 5 mL Graduated V Vial with 20-400 Cap Hickman Still, 13-425 and 20-400 Screw Threads Connecting Adapter, 13-425 Screw Threads
WHEATON
1.800.225.1437 (U.S. & Canada only) | +1.856.825.1100 | +1.856.825.1368 (F) | www.wheatonsci.com
#HEMISTRY¬'LASSWARE 7HEATON¬3EMI -ICRO¬+IT©¬ 7ITH¬THE¬7HEATON¬#ONNECTION Components in the Semi-Micro Kit are sized comparably to standard taper 19/22 glassware but have been designed for use with grease-free Wheaton Connections®. They are ideal for schools and universities because there is no need to change existing textbook methods. These kits are also ideal for industrial applications such as medicinal chemistry. • Safe. Working on a microscale means less exposure to toxic and radioactive materials and possible carcinogens. • Environmentally friendly. Disposal problems are greatly reduced because fewer chemicals are needed. • Economical. The consumption of expensive chemicals can be cut drastically. • Breakage from frozen joints is eliminated. Disposable vials can be used for reaction vessels.
Components are assembled with grease-free, screw-threaded Wheaton Connections®. Wheaton Connections® that are made from phenolic have a working temperature of up to 180°C. All caps have open tops and Teflon® faced septa for maximum versatility. Flask sizes range from 1 mL to 10 mL. Graduated V Vials® with interior conical bottoms are included for reaction and collection vessels. The 1 mL V Vial is graduated at the 0.1 mL level. The compact design of Wheaton grease-free, microscale apparatus makes it possible to join components on a desktop. Viton® “O” rings are included in the kit for gas inlet tubes or thermometers. Because components hold themselves together, only minimal clamping is necessary. Cat. No.
Description
Qty Included in Kit
774650
Complete Kit
1
Replacement Part Qty/Case
—
1 1 1 6 1 1 1 1 1 1 1 1 1 2 1
1 1 6 6 1 1 1 1 1 1 1 1 1 6 12
Component and Replacement Parts 110012 123892 125480 125486 165996 168388 333952 385792 439195 439215 439234 439264 677670 962515 964453
Claisen Adapter, 20-400 Screw Threads Connecting Adapter, 20-400 Screw Threads Wheaton Connection®, 13-425 to 20-400 Wheaton Connection®, 20-400 to 20-400 Thermometer Adapter, 20-400 Vacuum Adapter, 13-425 and 20-400 Screw Threads West Condenser, 200 mm, 13-425 and 20-400 Screw Threads Distilling Column, 200 mm, 13-425 and 20-400 Screw Threads Round-Bottom Flask, 25 mL, 20-400 Round-Bottom Flask, 50 mL, 20-400 Round-Bottom Flask, 100 mL, 20-400 Round-Bottom Flask, 250 mL, 20-400 Separatory Funnel with Teflon® Lined Cap, 125 mL, 20-400 Hose Connector, 13-425 Bleed Tube
For applications using Wheaton Chemistry Kits see pages 163-164.
WHEATON
1.800.225.1437 (U.S. & Canada only) | +1.856.825.1100 | +1.856.825.1368 (F) | www.wheatonsci.com
72
#HEMISTRY¬'LASSWARE ¬Dessicators
73
$ESICCATORS Why use a vacuum desiccator? Oven drying is the most common method of removing moisture from solids. However, this technique is not suitable for substances that are heat labile or tend to decompose. Vacuum desiccators are versatile and are equipped with a sidearm for connection to a vacuum source. The contents of the sealed evacuated desiccator are maintained in a dry, reduced-pressure atmosphere. Dried materials are stored in desiccators while cooling in order to minimize the uptake of moisture. After releasing vacuum, the desiccator cover can be removed vertically without disturbing the sample. Desiccators can be used for cooling oven-dried samples while keeping the samples dry.
• Hygroscopic materials should be stored in containers having tight fitting closures. Deliquescent samples and effervescent pharmaceuticals are prime examples. • Handling dried objects with one’s fingers can result in transfer of weighable quantities of water or oil from the skin. While weighing desiccator dried materials, forceps or tongs should be used.
7HEATON¬$RY 3EAL ¬6ACUUM¬$ESICCATOR • • • • •
Rugged, heavy soda-lime glass Lift off cover for storage above flange Silicone sealing ring for greaseless sealing Maximum vacuum of 27” Hg (914 hPa) Temperature range: 15°C to 80°C
Wheaton vacuum desiccators come complete with desiccator jar, cover, sleeve valve, silicone sealing ring, and aluminum plate. Place your sample inside the desiccator and apply vacuum to the side arm sleeve valve. The cover of the dessicator jar has a molded arrow on the top for alignment to the open position. Simply turn the sleeve valve to close the desiccator. To open the cover, simply turn sleeve valve to the open position. Once equilibrated, the cover will easily lift off. The desiccator is manufactured from soda-lime glass. To prevent freezing and increase performance, lubricating the standard taper sleeve valve with silicone-based vacuum grease is recommended. A 1/4” to 3/8” vacuum hose (not included) is used to connect the desiccator to vacuum or gas sources. Cat. No.
Opening Size (mm)
Joint Size (mm)
Overall H (mm)
Plate Dia (mm)
365882 365884 365886
100 150 250
40/35 40/35 55/38
170 225 325
89 140 223
WHEATON
Qty/Case
1 1 1
1.800.225.1437 (U.S. & Canada only) | +1.856.825.1100 | +1.856.825.1368 (F) | www.wheatonsci.com
#HEMISTRY¬'LASSWARE ¬Dessicators
74
$ESICCATOR¬2EPLACEMENT¬0ARTS¬ $ESICCATOR¬*AR • Replacement jar (base) for Wheaton Dry-Seal® desiccators
3EALING¬2ING ¬6ITON A chemically resistant Viton® rubber sealing ring is recommended when using common or corrosive organics in the Wheaton Dry Seal® vacuum desiccators.
Cat. No.
Opening Size (mm)
365822 365824 365826
100 150 250
Qty/Case
Cat. No.
Desiccator Opening Size (mm)
366012 366014 366016
100 150 250
1 1 1
Qty/Case
1 1 1
!LUMINUM¬0LATE • Replacement aluminum plate for Wheaton Dry-Seal® vacuum desiccators
#OVER ¬WITHOUT¬3LEEVE¬6ALVE • Replacement cover for Wheaton Dry-Seal® vacuum desiccators
Cat. No.
Opening Size (mm)
Joint Size (mm)
365892 365894 365896
100 150 250
40/35 40/35 55/38
Qty/Case
1 1 1
Cat. No.
Desiccator Opening Size (mm)
Outside Diameter (mm)
366042 366044 366046
100 150 250
89 140 223
Qty/Case
1 1 1
$ESICCATOR¬!CCESSORY
3LEEVE¬6ALVE • Replacement sleeve valve for Wheaton Dry-Seal® vacuum desiccators
Cat. No.
Joint Size (mm)
365904 365906
40/35 55/38
Qty/Case
1 1
2ETAINING¬2ING • Replacement retaining rings for Wheaton Dry-Seal® vacuum desiccators
Cat. No.
For Sleeve Valve Size
365914 365916
40/35 55/38
Qty/Case
6 6
3EALING¬2ING ¬3ILICONE • Replacement silicone ring for Wheaton Dry-Seal® vacuum desiccators
These are the replacement sealing rings for the original Wheaton Dry-Seal® vacuum desiccator.
Cat. No.
Desiccator Opening Size (mm)
366022 366024 366026
100 150 250
WHEATON
Qty/Case
$ESICCANT¬0ACK These packs are designed for use in all desiccators including the Wheaton Dry-Seal® 150 and 250 mm opening vacuum desiccators. The desiccant pack is placed in the bottom of the desiccator under the aluminum plate to preserve an anhydrous atmosphere within the desiccator. The desiccant is totally enclosed in fabric and perforated plastic for a dust-free environment. It comes supplied in a sealed foil package. To reactivate the desiccant pack: When pack turns from blue to pink, simply place the entire packet with perforated side down into vented oven and heat for approximately three hours at 150°C or until the desiccant returns to its original blue color. Cat. No.
Desiccator Opening Size (mm)
366074 366076
150 250
Qty/Case
4ECHNICAL¬!SSISTANCE Give us a call if you need technical assistance 1.800.225.1437 (U.S. & Canada Only) I +1.856.825.1100 Business hours: 8:00 AM to 5:00 PM EST in U.S.A.
1 1 1
1.800.225.1437 (U.S. & Canada only) | +1.856.825.1100 | +1.856.825.1368 (F) | www.wheatonsci.com
1 1
75
#HEMISTRY¬'LASSWARE ¬Filtration &ILTRATION¬!PPARATUS
W
heaton Science Products offers a wide variety of membrane filter support glassware for most vacuum filtration assemblies. To select the right support glassware for your need: • Choose 25, 47 or 90 mm, according to the diameter of your filter membrane. • Select from fritted glass, stainless steel, or a PTFE support • Choose the appropriate connection for the flask or bottle you will use to collect the filtrate.
Following is the basic information you will need to select the most appropriate glassware for your application.
Filter Size 25 mm Support Glassware is recommended when filtering small volumes of liquids for particulate or biological contamination studies. We recommend 47 mm Support Glassware when analyzing up to 500 mL of liquids for particulate or biological contamination, water/wastewater analysis (Reference: Standard Methods for the Examination of Water and Wastewater, 21st Edition, 2005), sterility testing of pharmaceuticals using the Membrane Filtration Method (Reference: U.S. Pharmacopeia), and for particulate-free or sterile filtrate preparation. We recommend 90 mm Support Glassware when filtering large sample volumes, liquids with a heavy particulate load and viscous liquids when a high flow rate is required. The larger filter area can provide filtration rates four times faster than 47 mm assemblies.
Support Style We recommend fritted glass supports for general membrane filtration analysis of samples for microbiological or particulate contamination. This support style is appropriate when using gridded filters because the glass frit provides the most even distribution of the sample through the filter membrane. All of the fritted glass support bases have a coarse (40-60 μm) porosity. We recommend stainless steel supports when filtering viscous or proteinaceous solutions to give the maximum flow rate. This support style is also ideal for producing ultra-clean filtrate, since the stainless steel screen will not shed particles into the filtrate. For Care and Cleaning, see page 81.
Connection to Flask/Bottle Silicone or neoprene stoppers are the most common connectors used to connect the filtration assembly to an Erlenmeyer style flask, and are appropriate for most routine filtration studies of aqueous solutions. However, we do not recommend stoppers when filtering organic or most corrosive solutions or when preparing HPLC mobile phase. We recommend filtration assemblies with standard taper 40/35 outer joint connections when filtering corrosive solutions and organic solvents. This connection style is also ideal when preparing HPLC mobile phase, since the “all-glass” connection eliminates phthalate contamination that can occur when using silicone or neoprene stoppers.
Specifications Cat. No.
419325 419327 419347 419360 419370 419380 419385-47 419400-47 419520-47 419530-47 419390 419450 419451 419452 419460 419461 419462
Filter Size
Filter Area
Prefilter Size
Support Material
25 mm 25 mm 47 mm 47 mm 47 mm 47 mm 47 mm 47 mm 47 mm 47 mm 47 mm 90 mm 90 mm 90 mm 90 mm 90 mm 90 mm
~ 2.5 cm2 ~ 2.5 cm2 ~ 9.6 cm2 ~ 9.6 cm2 ~ 9.6 cm2 ~ 9.6 cm2 ~ 9.6 cm2 ~ 9.6 cm2 ~ 9.6 cm2 ~ 9.6 cm2 ~ 9.6 cm2 ~ 38.5 cm2 ~ 38.5 cm2 ~ 38.5 cm2 ~ 38.5 cm2 ~ 38.5 cm2 ~ 38.5 cm2
20 mm 20 mm 35 mm 35 mm 35 mm 35 mm 35 mm N/A 35 mm 35 mm 35 mm 70 mm 70 mm 70 mm 70 mm 70 mm 70 mm
Fritted Glass Stainless Steel Fritted Glass Stainless Steel Fritted Glass Fritted Glass Fritted Glass Fritted Glass Fritted Glass Stainless Steel Stainless Steel Stainless Steel PTFE Fritted Glass Stainless Steel PTFE Fritted Glass
WHEATON
Support Porosity
Connection to Flask/Bottle
40-60 μm 100 mesh 40-60 μm 100 mesh 40-60 μm 40-60 μm 40-60 μm 40-60 μm 40-60 μm 100 mesh 100 mesh 100 mesh 0.062" 40-60 μm 100 mesh 0.062" 40-60 μm
1.800.225.1437 (U.S. & Canada only) | +1.856.825.1100 | +1.856.825.1368 (F) | www.wheatonsci.com
No. 5 Stopper No. 5 Stopper No. 8 Stopper No. 8 Stopper No. 8 Stopper 40/35 Joint 40/35 Joint 40/35 Joint GL 45 Thread GL 45 Thread 40/35 Joint No. 8 Stopper No. 8 Stopper No. 8 Stopper 40/35 Joint 40/35 Joint 40/35 Joint
#HEMISTRYÂŹ'LASSWARE ÂŹFiltration ÂŹMMÂŹ&ILTRATIONÂŹ!SSEMBLIESÂŹÂŹ WITHÂŹ.O ÂŹ ÂŹ3TOPPERÂŹ#ONNECTIONSÂŹ Wheaton 25 mm vacuum ďŹ ltration assemblies are designed to handle small volumes of liquids for analysis of particulate or microbiological contamination. The glass components are manufactured from Wheaton 33 low extractable borosilicate glass that conforms to USP Type I and ASTM E-438 Type I, Class A requirements. Flasks have a #2 hose connection for 1/4â€? (6 mm) I.D. tubing.
7ITHÂŹ&RITTEDÂŹ'LASSÂŹ3UPPORT This unit is recommended for general ďŹ ltration. It is supplied with a coarse porosity (40-60 Îźm) fritted glass support base, 15 mL graduated funnel, anodized aluminum clamp, and a No. 5 silicone stopper. Cat. No.
Description
419325
Complete Unit
Qty/Case
1
Glass Funnel, 25 mm, 15 mL Aluminum Clamp, 25 mm Fritted Glass Support Base, 25 mm Silicone Stopper, No. 5
1 1 1 6
Glass Funnel, 25 mm, 50 mL Filter Flask, 125 mL, Graduated, No. 5 Stopper Joint
1 1
Components 419330 419334 419332 419336
419325
Accessories 419331 635229
7ITHÂŹ3TAINLESSÂŹ3TEELÂŹ3UPPORT This unit is designed for ďŹ ltering viscous or proteinaceous solutions or to produce ultraclean ďŹ ltrate. The assembly is supplied complete with a 316 stainless steel support with 100 mesh screen, PTFE support screen gasket, glass support base, 15 mL graduated funnel, anodized aluminum clamp and a No. 5 silicone stopper. Cat. No.
Description
419327
Complete Unit
Qty/Case
1
Glass Funnel, 25 mm, 15 mL Aluminum Clamp, 25 mm Stainless Steel Support Screen, 25 mm Support Screen Gasket, 25 mm, TeonŽ Glass Base, 25 mm, for S.S. Support Silicone Stopper, No. 5
1 1 1 6 1 6
Glass Funnel, 25 mm, 50 mL Filter Flask, 125 mL, Graduated, No. 5 Stopper Joint
1 1
Components 419330 419334 419337 419338 419333 419336
Accessories 419331 635229
419327
3ET 5P When using a vacuum ďŹ ltration assembly, a second ask should be connected between the ďŹ ltering ask and the vacuum source. This helps prevent the accidental entry of the ďŹ ltrate into the vacuum pump. WHEATON
1.800.225.1437 (U.S. & Canada only) | +1.856.825.1100 | +1.856.825.1368 (F) | www.wheatonsci.com
76
77
#HEMISTRYÂŹ'LASSWARE ÂŹFiltration ÂŹMMÂŹ&ILTRATIONÂŹ!SSEMBLIESÂŹÂŹ WITHÂŹ.O ÂŹ ÂŹ3TOPPERÂŹ#ONNECTIONSÂŹ The 47 mm ďŹ ltration assemblies are designed to handle up to 500 mL of liquid for analysis of particulate or microbiological contamination. The glass components are manufactured from Wheaton 33 low extractable borosilicate glass that conforms to USP Type I and ASTM E-438 Type I, Class A requirements. Flasks have a #2 hose connection for 1/4â€? (6 mm) I.D. tubing.
7ITHÂŹ&RITTEDÂŹ'LASSÂŹ3UPPORT This unit is recommended for general ďŹ ltration. It is supplied with a coarse porosity (40-60 Îźm) fritted glass support base, 300 mL graduated funnel, anodized aluminum clamp, and a No. 8 silicone stopper. Cat. No.
Description
419347
Complete Unit
Qty/Case
1
Glass Funnel, 47 mm, 300 mL Aluminum Clamp, 47 mm Fritted Support Base, 47 mm Silicone Stopper, No. 8
1 1 1 6
Glass Funnel, 47 mm, 100 mL Glass Funnel, 47 mm, 500 mL Glass Funnel, 47 mm, 1000 mL Filtration Flask, 1 L, Graduated, No. 8 Stopper Joint Filter Flask, 2 L, Graduated, No. 8 Stopper Joint Filter Flask, 1 L, Safety Coated, No. 8 Stopper Joint
1 1 1 1 1 1
Components 419350 419354 419352 419356
Accessories 419410 419415 419420 635232 635233 635245
7ITHÂŹ4EmONš&ACEDÂŹ3UPPORTÂŹ"ASEÂŹ ÂŹ&UNNEL We recommend this unit for autoclaving with the ďŹ lter in place. The TeonÂŽ coating prevents the ďŹ lter from adhering to the ground glass surfaces. This unit is supplied complete with a TeonÂŽ faced, coarse porosity (40-60 Îźm) fritted glass support base, a TeonÂŽ faced 300 mL graduated funnel, an anodized aluminum clamp, and a No. 8 silicone stopper. Cat. No.
Description
419370
Complete Unit
Qty/Case
1
Glass Funnel, TeonŽ Faced, 47 mm, 300 mL Aluminum Clamp, 47 mm Fritted Glass Support Base, TeonŽ faced, 47 mm Silicone Stopper, No. 8
1 1 1 6
Filtration Flask, 1L, Graduated, No. 8 Stopper Joint Filter Flask, 2 L, Graduated, No. 8 Stopper Joint Filter Flask, 1L, Safety Coated, No. 8 Stopper Joint
1 1 1
Components 419374 419354 419372 419356
419347
Accessories 635232 635233 635245
7ITHÂŹ3TAINLESSÂŹ3TEELÂŹ3UPPORT
419370
This unit is designed for ďŹ ltering viscous or proteinaceous solutions or to produce ultraclean ďŹ ltrate. The assembly is supplied complete with a 316 stainless steel support with 100 mesh screen, PTFE support screen gasket, support base, 300 mL graduated funnel, anodized aluminum clamp and a No. 8 silicone stopper. Cat. No.
Description
419360
Complete Unit
Qty/Case
1
Glass Funnel, 47 mm, 300 mL Aluminum Clamp, 47 mm Stainless Steel Support Screen, 47 mm Support Screen Gasket, 47 mm Glass Base, 47 mm, for Stainless Steel Support Silicone Stopper, No. 8
1 1 1 6 1 6
Glass Funnel, 47 mm, 100 mL Glass Funnel, 47 mm, 500 mL Glass Funnel, 47 mm, 1000 mL Filtration Flask, 1 L, Graduated, No. 8 Stopper Joint Filter Flask, 2 L, Graduated, No. 8 Stopper Joint Filter Flask, 1 L, Safety Coated, No. 8 Stopper Joint
1 1 1 1 1 1
Components 419350 419354 419364 419366 419362 419356
Accessories
419360
WHEATON
419410 419415 419420 635232 635233 635245
1.800.225.1437 (U.S. & Canada only) | +1.856.825.1100 | +1.856.825.1368 (F) | www.wheatonsci.com
#HEMISTRYÂŹ'LASSWARE ÂŹFiltration ÂŹMMÂŹ&ILTRATIONÂŹ!SSEMBLYÂŹÂŹ WITHÂŹ3TANDARDÂŹ4APERÂŹ ÂŹ*OINTÂŹ#ONNECTIONÂŹ Wheaton “all-glassâ€? ďŹ ltration assemblies are recommended for the routine ďŹ ltration of organic solvents, for corrosive liquids and for the removal of particulates from HPLC solvents. The ground glass connection eliminates the phthalate contamination that can occur when you use either silicone or neoprene stoppers. Because the drip tip on the support bases extends below the hose connection, the ďŹ ltrate cannot enter the vacuum line. All units have a #2 hose connection for 1/4â€? (6 mm) I.D. exible tubing. We manufacture the glass components from Wheaton 33 low extractable borosilicate glass that conforms to USP Type I and ASTM E-438 Type I, Class A requirements.
7ITHÂŹ&RITTEDÂŹ'LASSÂŹ3UPPORT We recommend this unit for general ďŹ ltration. It comes complete with a coarse porosity (40-60 Îźm) fritted glass support base, graduated funnel, anodized aluminum clamp and 1 L ďŹ lter ask. Cat. No.
Description
419380 419385-47
Complete Assembly with 300 mL Funnel, 1 L Flask Complete Assembly with 500 mL Funnel, 2 L Flask
Qty/Case
1 1
Glass Funnel, 47 mm, 300 mL Glass Funnel, 47 mm, 500 mL Aluminum Clamp, 47 mm Fritted Glass Support Base, 47 mm, with 40/35 Outer Joint Filter Flask, 1 L, with 40/35 Inner Joint Filter Flask, 2 L, with 40/35 Inner Joint
1 1 1 1 1 1
Glass Funnel, 47 mm, 100 mL Glass Funnel, 47 mm, 1000 mL Filter Flask, 1 L, with 40/35 Inner Joint, Safety Coated
1 1 1
Components 419350 419415 419354 419382 635525 635526
Accessories 419410 419420 635527
7ITHÂŹ3TAINLESSÂŹ3TEELÂŹ3UPPORT This unit can ďŹ lter viscous or proteinaceous solutions or produce an ultra clean ďŹ ltrate. The assembly comes complete with a 316 stainless steel support with 100 mesh screen, TeonÂŽ support screen gasket, glass support base, 300 mL graduated funnel, anodized aluminum clamp and 1 L ďŹ lter ask. Cat. No.
Description
419390
Complete Unit
Qty/Case
1
Glass Funnel, 47 mm, 300 mL Aluminum Clamp, 47 mm Stainless Steel Support Screen, 47 mm Support Screen Gasket, 47 mm Glass Base, 47 mm, with 40/35 Outer Joint, for Stainless Steel Support Filter Flask, 1 L, with 40/35 Inner Joint
1 1 1 6 1 1
Glass Funnel, 47 mm, 100 mL Glass Funnel, 47 mm, 300 mL Glass Funnel, 47 mm, 500 mL Glass Funnel, 47 mm, 1000 mL Filter Flask, 1 L, with 40/35 Inner Joint, Safety Coated
1 1 1 1 1
Components 419350 419354 419364 419366 419392 635525
419385-47
Accessories 419410 419350 419415 419420 635527
7ITHÂŹ4RANSFERÂŹ!DAPTER This unit eliminates the traditional “pour and waitâ€? ďŹ ltration method. When you apply a vacuum, the transfer adapter draws the solvent directly from the reagent bottle. When the ďŹ ltration is complete, you can close the valve on the transfer adapter to degas the solvent. The assembly comes complete with a coarse porosity (40-60 Îźm) fritted glass support base, TeonÂŽ transfer adapter, anodized aluminum clamp and 1 L ďŹ lter ask.
419390
Cat. No.
Description
419400-47
Complete Unit
Qty/Case
1
Filtration Transfer Adapter, Complete Aluminum Clamp, 47 mm Fritted Glass Support Base, 47 mm, with 40/35 Outer Joint Filter Flask, 1 L, with 40/35 Inner Joint
1 1 1 1
Components 419620 419354 419382 635525
419400-47
WHEATON
1.800.225.1437 (U.S. & Canada only) | +1.856.825.1100 | +1.856.825.1368 (F) | www.wheatonsci.com
78
79
#HEMISTRY¬'LASSWARE ¬Filtration ¬MM¬&ILTRATION¬!SSEMBLY¬¬ WITH¬', ¬4HREAD¬#ONNECTION¬ These filtration assemblies are designed to collect the filtrate directly into a standard laboratory bottle. The connection to the bottle is made with a polybutylene terephthalate (PBT) cap and a Teflon®-faced silicone sealing ring. The glass components are manufactured from Wheaton 33 low extractable borosilicate glass that conforms to USP Type I and ASTM E-438 Type I, Class A requirements.
7ITH¬&RITTED¬'LASS¬3UPPORT We recommend this unit for general filtration. It comes complete with a coarse porosity (40-60 μm) fritted glass support base, 300 mL graduated funnel, anodized aluminum clamp, and a 1 L reservoir. Cat. No.
Description
419520-47
Complete Unit
Qty/Case
1
Components 419350 419354 419502 419501 240755 240780 W264730
Glass Funnel, 47 mm, 300 mL Aluminum Clamp, 47 mm Filtration Base, 47 mm with Vacuum Fitting Quick Disconnect Adapter PBT Cap, 45 mm, with 39 mm Opening Teflon®/Silicone Sealing Ring, for 45 mm cap, 26 mm I.D. Reservoir, 1 L
1 1 1 12 10 10 1
7ITH¬3TAINLESS¬3TEEL¬3UPPORT This unit is designed to filter viscous or proteinaceous solutions or produce ultra clean filtrate. The assembly comes complete with a 316 stainless steel support with 100 mesh screen, Teflon® support screen gasket, glass support base, 300 mL graduated funnel, anodized aluminum clamp and 1 L reservoir. Cat. No.
Description
419530-47
Complete Unit
Qty/Case
1
Components
419520-47
419350 419354 419364 419366 419501 240755 240780 W264730 WF034590
Glass Funnel, 47 mm, 300 mL Aluminum Clamp, 47 mm Stainless Steel Support Screen, 47 mm Support Screen Gasket, 47 mm Quick Disconnect Adapter PBT Cap, 45 mm, with 39 mm Opening Teflon®/Silicone Sealing Ring, for 45 mm Cap, 26 mm I.D. Reservoir, 1 L Filtration Base for Stainless Steel Support, 47 mm with Vacuum Fitting
1 1 1 6 12 10 10 1 1
&ILTRATION¬!DAPTER¬!SSEMBLY¬ The filtration adapter assembly makes it easier to connect standard 47 and 90 mm filtration assemblies with stopper connections to a standard laboratory bottle with a GL45 thread. The adapter replaces the stopper to make the connection to the bottle. A GL32 PBT cap with a Teflon® faced silicone sealing ring makes the connection to the filtration assembly. A GL45 PBT cap with Teflon® faced silicone sealing ring then makes the connection to the bottle. This unit comes complete with a PBT hose connection for use with 1/4” (6 mm) I.D. flexible tubing.
419530-47
Cat. No.
Description
419505
Complete Unit
Qty/Case
1
Component Parts 240754 240776 419506 419501 240755 240780
PBT Cap, GL32, with 19 mm Opening Teflon®/Silicone Sealing Ring, for 32 mm Cap, with 16 mm Opening Glass Adapter Only Quick Disconnect Adapter PBT Cap, GL45, with 39 mm Opening Teflon®/Silicone Sealing Ring, for 45 mm Cap, 26 mm I.D.
419505
WHEATON
1.800.225.1437 (U.S. & Canada only) | +1.856.825.1100 | +1.856.825.1368 (F) | www.wheatonsci.com
10 5 1 12 10 10
#HEMISTRYÂŹ'LASSWARE ÂŹFiltration
80
ÂŹMMÂŹ&ILTRATIONÂŹ!SSEMBLIESÂŹ We recommend 90 mm ďŹ ltration assemblies for large sample volumes, liquids with a heavy particulate load and viscous liquids when you require a high ow rate. Because of its larger ďŹ lter area, the 90 mm assembly can provide ďŹ ltration rates up to four times faster than 47 mm assemblies. Wheaton Science Products 90 mm ďŹ ltration assemblies use a unique screw collar design for connecting the funnel to the support base. Compared to the traditional aluminum clamp, this design provides a more even seal of membrane ďŹ lter in place. The glass components are manufactured from Wheaton 33 low extractable borosilicate glass that conforms to USP Type I and ASTM E-438 Type I, Class A requirements. Flasks have a #2 hose connection for 1/4â€? (6 mm) I.D. tubing.
7ITHÂŹ.O ÂŹ ÂŹ3TOPPERÂŹ#ONNECTIONS We recommend these ďŹ ltration assemblies for routine ďŹ ltration of aqueous solutions. The No. 8 silicone stopper makes the connection to a standard 1 liter Erlenmeyer-style ďŹ ltration ask. Each assembly comes complete with a 1 L funnel with screw collar, glass support base, ďŹ lter support (either fritted glass, stainless steel or TeonÂŽ) and a No. 8 silicone stopper. Cat. No.
Description
419450 419451 419452
Complete Unit with Stainless Steel Support Complete Unit with TeonŽ Support Complete Unit with Removable Glass Frit
1 1 1
Glass Funnel, 90 mm, 1 L, with Screw Collar Glass Frit, 90 mm Stainless Steel Support, 90 mm TeonŽ Frit, 90 mm Support Base, 90 mm Silicone Stopper, No. 8
1 1 1 1 1 6
Filtration Flask, 1 L, Graduated, No. 8 Stopper Joint Filter Flask, 1 L, Safety Coated, No. 8 Stopper Joint
1 1
&ILTERÂŹ&LASKSÂŹ Wheaton makes Erlenmeyer-style asks from heavy-wall glass to give them the mechanical strength needed for vacuum ďŹ ltration. The side arms are #2 hose connections that accept standard 1/4â€? (6 mm) I.D. exible tubing for connection to a vacuum source. These asks are manufactured from Wheaton 33 low extractable borosilicate glass that conforms to USP Type I and ASTM E-438 Type I, Class A requirements. You should connect a second ask between the ďŹ ltering ask and the vacuum source to prevent entry of the ďŹ ltrate into the vacuum source. Cat. No.
Description
635229 635232 635233
Filter Flask, 125 mL, Graduated, No. 5 Stopper Joint Filtration Flask, 1 L, Graduated, No. 8 Stopper Joint Filter Flask, 2 L, Graduated, No. 8 Stopper Joint
1 1 1
Qty/Case
Safetyoated C
Components 419470 WF030089 419471 265422 419455 419356
Qty/Case
Accessories 635232 635245
7ITHÂŹ3TANDARDÂŹ4APERÂŹ ÂŹ*OINTÂŹ#ONNECTION We recommend these “all-glassâ€? ďŹ ltration assemblies for the routine ďŹ ltration of organic solvents, for corrosive liquids, and for the removal of particulate from HPLC solvents. The ground glass connection eliminates the phthalate contamination that can occur when you use either silicone or neoprene stoppers. Because the drip tip on the support base extends below the hose connection, the ďŹ ltrate cannot enter the vacuum line. These assemblies require a ďŹ ltration ask with a standard taper 40/35 inner joint (listed below).
Cat. No.
Description
419460 419461 419462
90 mm Filter Assembly with Stainless Steel Support 90 mm Filter Assembly with TeonŽ Support 90 mm Filter Assembly with Removable Glass Frit
1 1 1
Glass Funnel, 90 mm, 1 L, with Screw Collar Glass Frit, 90 mm Stainless Steel Support, 90 mm TeonŽ Frit, 90 mm Support Base, 90 mm
1 1 1 1 1
Filter Flask, 1 L, with 40/35 Inner Joint Filter Flask, 2 L, with 40/35 Inner Joint Filter Flask, 1 L, Safety Coated, with 40/35 Inner Joint
1 1 1
Accessories 635525 635526 635527
WHEATON
This ďŹ lter ask is coated on the outside with Wheaton’s plastisol safety coating, which is autoclavable (121°C, 15 psi, 15 minutes). The ask has a #2 hose connection that accepts 1/4â€? (6 mm) I.D. exible tubing for connection to a vacuum source. Cat. No.
Description
635245
Filter Flask, 1 L, Safety Coated, No. 8 Stopper Joint
Qty/Case
1
Qty/Case
Components 419470 WF030089 419471 265422 419465
&ILTERÂŹ&LASK ÂŹ3AFETYÂŹ#OATEDÂŹ
4RANSFERÂŹ&UNNELÂŹ The all-glass transfer funnel is ideal for transferring small volumes (up to 300 mL) of sample to a ďŹ ltration assembly. The funnel is manufactured from Wheaton 33 low extractable borosilicate glass that conforms to USP Type I and ASTM E-438 Type I, Class A requirements. Cat. No.
Description
419430
Glass Transfer Funnel, 300 mL
1.800.225.1437 (U.S. & Canada only) | +1.856.825.1100 | +1.856.825.1368 (F) | www.wheatonsci.com
Qty/Case
1
81
#HEMISTRY¬'LASSWARE ¬Filtration
#ARE¬AND¬#LEANING¬ 3AFETY
#LEANING
Carefully inspect glassware before using it under vacuum. Repair or replace any glassware that is scratched, chipped, cracked or broken. Also, always use adequate safety shielding when working with glass under vacuum.
Fritted Support Bases. Wash a new fritted glass filtration base with hot hydrochloric acid, following with several rinses of either distilled or high-quality deionized water. This procedure removes dust particles and powdered glass from the pores of the fritted disk. Pull the acid wash and water rinses through the fritted disk with a good vacuum. Start each successive water rinse only after the preceding one has been completely pulled through.
/PERATING¬0RESSURE Fritted filtration glassware is designed for vacuum filtration. If you use it for pressure filtration, do not let the maximum pressure differential on the fritted disk exceed 15 lb/in2 (1 kg/cm2).
$RYING¬AND¬3TERILIZING Do not subject filtration glassware with a fritted disk to sudden changes in temperature or to a direct flame. Excessive temperature differences between the fritted disk and its surrounding glass causes internal strain to develop in the glassware, which can lead to fracturing of the filtration base. Place fritted glassware in a cold drying oven or autoclave. Do net let the speed of heating or cooling exceed 8°C per minute. Before filtering hot liquids, slowly bring the filtration base up to the temperature of the liquid in a drying oven or hot cabinet. Slowly heat wet fritted support bases to 80°C and dry for one (1) hour before increasing the temperature.
3ETUP When using a vacuum filtration assembly, connect a second flask between the filtering flask and the vacuum source. This helps prevent the accidental entry of the filtrate into the vacuum pump.
If no precipitate has entered the pores of the fritted disk, it may be sufficient to rinse the surface of the fritted disk under the tap or with a rinse bottle. Then wipe the fritted disk surface clean with a small brush or squeegee. Do not use paper towels to dry the fritted disk, since this can force particulates into the pores of the disk. Many precipitants can be removed from the pores of the fritted disk by back-flushing. Connect the stem of the filtration support base to a water tap with a piece of rubber tubing and allow the water to run backwards through the fritted disk. Warning: The water pressure must not exceed 15 lb/in2 (1 kg/cm2). When working with biological compounds, use sulfuric acid with a nitrate or perchloric addition as a cleaning agent. Avoid dichromate sulfuric acid as a cleaning agent to prevent the reduction formation of trivalent chromium compounds. Hot, concentrated phosphoric acid and hot alkaline solutions attack the surface of the glass and therefore are not suitable for cleaning. Stainless Steel Screens. Stainless steel screens can be washed with a laboratory detergent with an initial rinse with tap water and a final rinse with distilled water. Hydrochloric acid is not recommended for cleaning as this can promote corrosion of the stainless steel. Aluminum Clamps. The aluminum clamps have been hard-anodized to prevent corrosion. A wash with a good laboratory detergent followed by an initial rinse with tap water and a final rinse with distilled water should be adequate.
For additional safety in the laboratory, use Wheaton Safety Coated Bottles. They are ideal for mobile phase reservoirs, for storing reagents, chemicals and for collecting waste materials. For more information see pages 15-17.
WHEATON
1.800.225.1437 (U.S. & Canada only) | +1.856.825.1100 | +1.856.825.1368 (F) | www.wheatonsci.com
#HEMISTRY¬'LASSWARE ¬Solids Determination 3OLIDS¬$ETERMINATION
%NVIRONMENTAL¬4ESTING Wheaton has many products for environmental testing and for sample and liquid handling. Refer to the sections below when searching for these specific items. • BOD Bottles page 3 • Bottles for Sample Collection pages 7 - 28 • Bottle Top Dispensers pages 99-100
Imhoff Cone with Rack
• Chemistry Glassware pages 67-80
)MHOFF¬#ONE ¬0LASTIC
• Coliwasa & Other Sample Collection Devices page 129
• • • •
Used to determine settleable solids Manufactured from styrene-acrylonitrile Removal plug allows for easy cleaning Imhoff cone rack can be purchased separately
• EPA Vials & Other Sample Collection Vials pages 142-152
This unit is designed for volumetric determination of settleable solids in surface and saline waters as well as domestic and industrial wastes. The cone is externally graduated from the plug up to 1000 mL: 0 to 1 mL x 0.1 mL; 1 to 10 mL x 0.5 mL; 10 to 40 mL x 1 mL, 40 to 100 mL x 2 mL; with lines and numbers at 250, 500 and 1000 mL. The Imhoff Cone is manufactured from styreneacrylonitrile and comes with a low-density polyethylene plug. To clean, simply remove the leak-resistant screw cap and plug. Reference: Standard Methods for the Examination of Water and Wastewater, 21st Edition (2005), Method 2540 F. The 3 and 4-place Imhoff Cone Racks are constructed of plated, heavy-gauge steel to provide long life. Cat. No.
Description
Size (mL)
Top Dia x Length (mm)
W990800
Imhoff Cone
1000
108 x 451
4
— —
— —
1 1
• Imhoff Cone for Solids Determination page 82 • Pipettors with volumes up to 10 mL pages 111-116
• Safety Coated Bottles pages 16 - 17 • TCLP Extraction Bottles page 5
Qty/Case
Imhoff Cone Racks 990760 990760-4
3-Place Rack 4-Place Rack
7EIGHING¬$ISHES
7EIGHING¬$ISHES • Aluminum weighing dishes • Ideal for milligram weighing • Use with liquids or solids
These lightweight, low tare (0.15 g for 11 mm and 0.45 g for 20 mm) dishes are ideal for milligram weighing. The smooth aluminum surface ensures complete transfer. Use of balance-type forceps enables easy grasping. Liquids or solids may be transferred to this micro dish to be weighed. Cat. No.
Dia x H (mm)
370790 370792
11 x 6 20 x 8
WHEATON
Qty/Case
1000 1000
1.800.225.1437 (U.S. & Canada only) | +1.856.825.1100 | +1.856.825.1368 (F) | www.wheatonsci.com
82
83
#HROMATOGRAPHY ÂŹAutosampler Vials Wheaton Science Products chromatography vials and accessories are your assurance of reproducible quality. Not all autosampler vials are alike‌ so be sure to specify Wheaton for the best in quality, value and reliability. Wheaton vials are available in crimp, snap/crimp and screw cap ďŹ nish. The information below explains the difference between the different thread ďŹ nishes on the vials.
7HEATONÂŹ ÂŹM,ÂŹ!"#ÂŹ6IALŠ Wheaton ABC Vials™ offer several beneďŹ ts over comparable vials: • Superior thread design provides a more secure seal to the closure • 40% larger neck opening versus standard opening screw top vials improves sample accessibility, accommodates wider range of inserts, and reduces autosampler needle damage • ABC Caps are supplied with Wheaton “Super Septaâ€? low extractable vial septa – optimal for GC/MS • Packaged in recyclable PET clamshells to reduce particulate contamination • Compatible with most GC autosamplers which accept crimped top vial
7HEATONÂŹ ÂŹM,ÂŹ% :ÂŹ6IALš Wheaton E-Z VialsÂŽ are the autosampler vial of choice in the laboratory market. • 40% larger neck opening versus standard opening vials improves sample accessibility, accommodates wider range of inserts, and reduces autosampler needle damage • Larger capacity: 1.8 mL versus 1.5 mL • E-Z convenience packaging – vials are shrink-wrapped in trays of 100 • Crimp, snap-crimp, or thread ďŹ nish
7HEATON3NAP#APS Convenient seals remove in a snap! Available in a wide variety of liners and colors. • Positive seal and easy removal • Crimping and decapping tools not required • Larger target area for easier needle penetration
7HEATONÂŹ!UTOSAMPLERÂŹ6IALÂŹ3ELECTORÂŹ'UIDE Vial Size (mm) Vial Type
8 x 40 Shell Vial
12 x 32 Shell Vial
12 x 32 Crimp Finish
12 x 32 Snap/Crimp
12 x 32 ABC 9mm Screw Thread
12 x 32 8-425 Screw Thread
12 x 32 10-425 Screw Thread
15 x 45 13-425 Screw Thread
15 x 45 Shell Vial
• • • • • • •
• • • • • • •
-
• -
• -
-
• • • • •
• • • • •
• -
-
-
-
• • -
• • -
• • -
• • -
-
-
• •
• •
• •
• •
•
-
• -
-
• -
-
-
-
-
-
• -
• -
• •
-
Mfr. & Model Agilent GC CTC Combi PAL/GC PAL • 7890A • • 7673/7683 7670A/7671A • 6820/6850/6890N • 5975C • 5890/7985A/6890 • Agilent LC 1200 Series • 1100 Series Prep • 1100 Series Standard • 1050 • 1090 • Alcott Chrom 719D • 718AL • 728 Alltech Associates 580 • 570 • Amersham Pharmacia Biotech (division of Applied Biosystems Group) 2157-010 • 2457-020 Beckman Coulter 501/502/507 504 508 Bruker / Daltronics LC 51 CE Instruments (division of Thermo Fisher ScientiďŹ c) 42 Place Tray • 60 Place Tray AS105 Tray • AS 200 Tray -
WHEATON
-
-
-
-
•
•
• • -
-
-
-
• -
• -
1.800.225.1437 (U.S. & Canada only) | +1.856.825.1100 | +1.856.825.1368 (F) | www.wheatonsci.com
#HROMATOGRAPHY ¬Autosampler Vials Vial Size (mm) Vial Type
8 x 40 Shell Vial
12 x 32 Shell Vial
84
12 x 32 Crimp Finish
12 x 32 Snap/Crimp
12 x 32 ABC 9mm Screw Thread
12 x 32 8-425 Screw Thread
12 x 32 10-425 Screw Thread
15 x 45 13-425 Screw Thread
15 x 45 Shell Vial
• •
• •
• •
• •
-
-
-
• -
• • •
• •
• • •
-
-
-
• • •
• • •
• • • •
• • •
-
-
-
• •
• •
• •
• •
-
-
-
• • •
• • •
• • •
• • •
-
-
-
• • • •
• • • • •
• • • • • •
• • • • •
• -
• • -
• -
• • • • • -
• • • • • -
• • • • • -
• • • • • •
-
-
-
• • • • • • • • •
• • • • • • • • •
• • • • • • • • -
• • • • • • • • -
-
• -
-
• • • • • • •
• • • • • •
• • • • • •
• • • • -
-
-
-
• • -
• • -
-
• • -
-
•
•
-
-
-
• • • •
• -
• •
• •
•
• • • • •
• • • • •
• • • • • •
• • • • -
• • • -
-
• • • •
• • • •
• • • -
• • • •
-
-
-
• • • • •
• • • • •
-
• • • • •
-
-
-
• •
• •
• • • •
• •
•
-
-
• •
• • • •
• • •
• •
-
-
-
•
• • • • • -
• • • • • -
• • • • -
• -
• • • •
• • •
Mfr. & Model Dani ALS 86.80 ALS 39.80 Dionex/Gynkotek Gina ALI-100 AS 509 Dynatech/Precision WPS-3000 42 Place Tray 60 Place Tray LC2000 231 XL, 232 XL ESA/LC Packing Model 542 Midas Gilson 233 Sample Changer 231 XL/232XL/ 233XL GX-271/281/ Aspec XL Hitachi L2200 L7250 L8800 L7200 • AS-2000 AS-4000 Jasco AS-2050/2055/2057 AS-2059 AS-1555/1555-10 AS-1559 851-AS, AS-900 LC 800/900 Series Leap Technologies CTC DI PAL CTC Combi PAL CTC A200E CTC HTS PAL CTC HTS Twin PAL CTC HTC PAL CTC LC mini PAL CTC A2000S A200LC Perkin Elmer Claris 500, 600 Autosystem Autosystem XL Series 200 Integral 4000 ISS 100, ISS 200 LC 600 42 Place Tray Phillips/ Pye UNICAM 4710 4700LC-GC/S4/S8 4247 C-XP Shimadzu GC AOC-20i/AOC-20s AOC-8B AOC-5000 • AOC-14/AOC-17 Shimadzu HPLC SIL-HTa/SIL-HTc • SIL-10ADVP • SIL-10A/SIL-10Ai/SIL-10Ap • SIL-6B/SIL-9A/SIL-8A SIL-10AD Promis • Spark Holland Reliance Midas Marathon • Triathon • Thermo Scientific (division of Thermo Fisher Scientific) AS1000/AS3000/AS3500 TriPlus AS/HS/DUO Surveyer Plus / Plus Lite Accela 8875/8880 Varian GC CP-8400/CP-8410 8200CX Ultra GC/MS 8100/8200 Varian LC 9100/9090/9095 ProStar 400/410 ProStar 420/430 Marathon • Waters LC Acquity Alliance • Breeze • 717Plus • 2700 Sample Manager 710/712/715 -
WHEATON
1.800.225.1437 (U.S. & Canada only) | +1.856.825.1100 | +1.856.825.1368 (F) | www.wheatonsci.com
85
#HROMATOGRAPHY ¬Autosampler Vials !UTOSAMPLER¬6IAL¬3IZER #OLOR¬#ODES RED - Glass Vials BLUE - Plastic Vials GREEN - Glass/Plastic Vials Wheaton chromatography vials and inserts are shown at exact size. The catalog numbers below are color coded by vial material.
8 x 40 mm
225241 (Clear) W225243 (Clear)
225242 (Clear)
12 x 32 mm
225172 (Amber) 225173 (Amber) 225174 (Clear) 225175 (Clear)
225220-01 (Clear) 225221-01 (Amber)
225179 (Clear) 225179-01 (Clear) 225179-02 (Amber) 225179-03 (Amber)
223682 (Clear) 223682-01 (Clear) 223692 (Amber) 223692-01 (Amber)
W225150 (Clear) W225151 (Clear) W225152 (Amber) W225153 (Amber)
225326 (Clear) 225328 (Amber)
224626 (Clear) 224627 (Clear) 224628 (Amber) 224629 (Amber)
W225900 (Clear) W225910 (Amber)
225120 (Clear) 225121 (Amber) 225124 (Clear)
225180 (Clear)
225185 (Clear)
225190 (Clear) 225200 (Amber)
225195 (Clear) 225205 (Amber)
225235 (Clear)
W225237 (Clear)
986211 (Clear)
986212 (Clear)
986281 (Clear)
986282 (Clear)
W225187 (Clear)
W225186 (Clear)
W225181 (Clear)
W225149 (Clear)
W242805 (Clear)
WHEATON
1.800.225.1437 (U.S. & Canada only) | +1.856.825.1100 | +1.856.825.1368 (F) | www.wheatonsci.com
#HROMATOGRAPHY ¬Autosampler Vials #OLOR¬#ODES RED - Glass Vials BLUE - Plastic Vials GREEN - Glass/Plastic Vials Wheaton chromatography vials and inserts are shown at exact size. The catalog numbers below are color coded by vial material.
15 x 45 mm
224794 (Clear) 224794-01 (Clear) 224795 (Amber) 224795-01 (Amber)
225126 (Clear) 225127 (Amber) 225129 (Clear)
225130 (Clear)
Limited Volume Inserts
225256 (Clear) 225257 (Clear) W225251 (Clear)
225255 (Clear)
225265 (Clear)
Top Spring
Bottom Spring
225258 (Clear) 225259 (Clear)
225260 (Clear) 225261 (Clear)
For Vial with Step
Bottom Spring
225268 (Clear) Bottom Spring
Flat Bottom
Bottom Spring
Headspace Vials
225277 (Clear)
WHEATON
225278 (Clear)
225280 (Clear)
225350-631 (Clear) 225350-531 (Clear)
985688 (Clear)
1.800.225.1437 (U.S. & Canada only) | +1.856.825.1100 | +1.856.825.1368 (F) | www.wheatonsci.com
86
#HROMATOGRAPHY ¬Autosampler Vials
87
3HELL¬6IALS in
Avanilvaebnlieence Co
Packs
¬X¬ ¬MM¬3HELL¬6IAL • Choice of borosilicate glass or polypropylene • Snap plug closure available in natural polyethylene • Purchase vials and caps separately or together in Convenience Packs
in
Avanilvaebnlieence Co
Shell Vials
Packs
These vials are available in clear or amber borosilicate glass and natural polypropylene. Vials and snap plug caps can be purchased separately or together by ordering the Wheaton Convenience Packs. The polyethylene snap plug caps feature a starburst top for easier needle penetration.
Limited Volume Insert
¬X¬ ¬MM¬3HELL¬6IAL¬ • • • • •
Can be used in Waters WISP® 96-position autosampler Choice of borosilicate glass or polypropylene 0.15 or 0.20 mL limited volume insert Snap plug closures available in 5 colors Purchase vials and caps separately or together in Convenience Packs
3PECIlCATIONS Diameter x Height .......................................................................12 x 32 mm Vial Volume ........................................................................................ 2.0 mL Cap size ............................................................................................. 12 mm
These vials are specially designed for use with the Waters WISP® 96-position autosampler. The vials are available in clear borosilicate glass and natural polypropylene. Vials, limited-volume inserts and snap plug caps can be purchased separately or purchase vials and caps together by ordering the Wheaton Convenience Packs. The polyethylene snap plug caps feature a starburst top for easier needle penetration and they are available in natural, red, blue, green and yellow.
Cat. No.
3PECIlCATIONS
Convenience Pack
Diameter x Height .........................................................................8 x 40 mm Volume: Vial ............................................................................................ 1.0 mL Limited volume vial ..................................................................... 0.7 mL Limited volume insert ..................................................... 0.15 & 0.20 mL Cap size ............................................................................................... 8 mm Cat. No.
Description
Shelf Pack
Description
Shelf Pack
Qty/Case
12 x 32 Shell Vial 225120 225121 225124
2.0 mL Glass Shell Vial, Clear 2.0 mL Glass Shell Vial, Amber 2.0 mL Polypropylene Shell Vial
100 100 100
1000 1000 1000
100
1000
100 100 100
1000 1000 1000
12 mm Snap Plug Cap 242810 W225122 W225123 W225125
12 mm Snap Plug Cap, Natural 2.0 mL Glass Shell Vial, Clear with Plug Cap 2.0 mL Glass Shell Vial, Amber with Plug Cap 2.0 mL Polypropylene Shell Vial with Plug Cap
Vials fit 985800 vial rack. See page 149.
Qty/Case
Shell Vial W225243 225241 225242
1.0 mL Glass Shell Vial, Clear 1.0 mL Polypropylene Shell Vial 0.7 mL PP Limited Volume Shell Vial
200 200 100
1000 1000 1000
— —
100 100
200 200 200 200 200
1000 1000 1000 1000 1000
200
1000
Limited Volume Insert 225256 W225251
0.20 mL Glass Insert with Bottom Spring 0.15 mL Glass Insert with Bottom Spring
8 mm Snap Plug Caps 242800 242802 242804 242806 242808
Natural Red Blue Green Yellow
Convenience Pack W225244
1.0 mL Glass Shell Vial, Plug Cap (Cat. No. 242800)
Organize your shell vials in the Wheaton autoclavable polypropylene vial rack (Cat. No. 985750). See page 149 for details.
¬X¬ ¬MM¬3HELL¬6IAL • Choice of borosilicate glass or polypropylene • Snap plug closure available in low density polyethylene
These vials are available in clear and amber borosilicate glass and natural polypropylene. Vials and snap plug caps can be purchased separately. The polyethylene snap plug caps feature a starburst slit top for easier needle penetration. 3PECIlCATIONS Diameter x Height .......................................................................15 x 45 mm Vial Volume ........................................................................................... 4 mL Limited Volume Vial ............................................................................... 3 mL Cap size ............................................................................................. 15 mm Cat. No.
Description
Shelf Pack
Qty/Case
15 x 45 mm Shell Vial 225126 225127 225129 225130
4.0 mL Glass Shell Vial, Clear 4.0 mL Glass Shell Vial, Amber 4.0 mL Polypropylene Shell Vial 3.0 mL Polypropylene Limited Volume Shell Vial
100 100 100 100
1000 1000 1000 1000
100
1000
15 mm Snap Plug Cap 242815
15 mm LDPE Conical Snap Plug Cap, Natural
Vials fit 868804 vial rack. See page 149.
WHEATON
1.800.225.1437 (U.S. & Canada only) | +1.856.825.1100 | +1.856.825.1368 (F) | www.wheatonsci.com
#HROMATOGRAPHY ¬Autosampler Vials #RIMP¬4OP¬6IALS 3PECIlCATIONS Diameter x Height ........................................................................12 x 32 mm Vial volume ........................................................................................ 1.8 mL Limited volume insert ............................................................ 0.10 - 0.35 mL Crimp Cap size .................................................................................... 11 mm
in
Avanilvaebnlieence Co acks P ¬X¬ ¬MM¬% :¬6IAL ¬ E-Z Vials
• • • • •
Limited Volume Insert
Wheaton E-Z Vials feature a 40% larger neck opening than standard opening vials. The larger opening improves sample accessibility while reducing auto sampler needle damage. Vial capacity has been increased from 1.5 to 1.8 mL. E-Z Vials are designed for use with 11 mm aluminum seals. E-Z Vials are manufactured from Type I borosilicate glass and are packaged in shrink-wrapped trays of 100 for convenience and cleanliness. For 11 mm Aluminum E-Z Seals see page 89. Cat. No.
1.8 mL E-Z Vial, Clear 1.8 mL E-Z Vial, Clear, w/Writing patch 1.8 mL E-Z Vial, Amber 1.8 mL E-Z Vial, Amber, w/Writing patch
225255 225265 225257 225350-631
0.10 mL Glass Insert with Top Spring 0.25 mL Glass Insert with Bottom Spring 0.25 mL Polypropylene Insert with Bottom Spring 0.35 mL Glass Flat Bottom Insert
1000 1000 1000 1000
100 — — 200
200 100 100 1000
With 0.002 Teflon®/0.038 Silicone Liners W225172-02 Natural Aluminum W225172-0203 Red Aluminum W225172-0204 Blue Aluminum W225172-0207 Green Aluminum
With 0.002 Teflon®/0.037 Gray Butyl Liners W225175-12 Natural Aluminum W225175-1203 Red Aluminum W225175-1204 Blue Aluminum W225175-1207 Green Aluminum
With 0.002 Teflon®/0.036 Silicone/0.002 Teflon® Liners W225172-03 Natural Aluminum 100 W225172-0303 Red Aluminum 100 W225172-0304 Blue Aluminum 100 W225172-0307 Green Aluminum 100
100 100 100 100
®
With 0.002 Teflon /0.038 Red Rubber Liners W225174-01 Natural Aluminum W225174-0103 Red Aluminum W225174-0104 Blue Aluminum W225174-0107 Green Aluminum
100 100 100 100
E-Z Vials and 11 mm Aluminum Seals are available in convenience packs of 100. The clear and amber vials are made of Type I borosilicate glass. The aluminum seals are available in red, blue, green and natural colors.
With 0.002 Teflon®/0.038 Silicone Liners W225174-02 Natural Aluminum W225174-0203 Red Aluminum W225174-0204 Blue Aluminum W225174-0207 Green Aluminum
100 100 100 100
Vials fit 985800 vial rack. See page 149.
#ONVENIENCE¬0ACK • 12 x 32 E-Z Vial® & 11 mm Aluminum E-Z Seal™
12 x 32 mm Clear E-Z Vial with Aluminum Seal Cat. No. Description Qty/Case
100 100 100 100
®
WHEATON
100 100 100 100
With 0.002 Teflon®/0.036 Silicone/0.036 Teflon® Liners W225175-03 Natural Aluminum 100 W225175-0303 Red Aluminum 100 W225175-0304 Blue Aluminum 100 W225175-0307 Green Aluminum 100
12 x 32 mm Clear E-Z Vial with Patch & Aluminum Seal Cat. No. Description Qty/Case
With 0.002 Teflon /0.038 Silicone Liners W225175-02 Natural Aluminum W225175-0203 Red Aluminum W225175-0204 Blue Aluminum W225175-0207 Green Aluminum
Qty/Case
Limited Volume Inserts 11 mm E-Z Seals (See page 89)
ence C¬onveanciks P
With 0.002 Teflon®/0.038 Red Rubber Liners W225175-01 Natural Aluminum W225175-0103 Red Aluminum W225175-0104 Blue Aluminum W225175-0107 Green Aluminum
Shelf Pack
E-Z Vial 225175 225174 225172 225173
40% large opening Manufactured from borosilicate glass Use with 11 mm aluminum seals Limited volume insert Purchase vials and caps separately or together in Convenience Packs
Description
100 100 100 100
With 0.002 Teflon®/0.037 Gray Butyl Liners W225172-12 Natural Aluminum W225172-1203 Red Aluminum W225172-1204 Blue Aluminum W225172-1207 Green Aluminum
100 100 100 100
100 100 100 100
12 x 32 mm Amber E-Z Vial with Patch and Aluminum Seal Cat. No. Description Qty/Case With 0.002 Teflon®/0.038 Red Rubber Liners W225173-01 Natural Aluminum W225173-0103 Red Aluminum W225173-0104 Blue Aluminum W225173-0107 Green Aluminum
100 100 100 100
With 0.002 Teflon®/0.036 Silicone/0.002 Teflon® Liners W225174-03 Natural Aluminum 100 W225174-0303 Red Aluminum 100 W225174-0304 Blue Aluminum 100 W225174-0307 Green Aluminum 100
With 0.002 Teflon®/0.038 Silicone Liners W225173-02 Natural Aluminum W225173-0203 Red Aluminum W225173-0204 Blue Aluminum W225173-0207 Green Aluminum
100 100 100 100
With 0.002 Teflon®/0.037 Gray Butyl Liners W225174-12 Natural Aluminum W225174-1203 Red Aluminum W225174-1204 Blue Aluminum W225174-1207 Green Aluminum
With 0.002 Teflon®/0.036 Silicone/0.002 Teflon® Liners W225173-03 Natural Aluminum 100 W225173-0303 Red Aluminum 100 W225173-0304 Blue Aluminum 100 W225173-0307 Green Aluminum 100
100 100 100 100
12 x 32 mm Amber E-Z Vial with Aluminum Seal Cat. No. Description Qty/Case With 0.002 Teflon®/0.038 Red Rubber Liners W225172-01 Natural Aluminum W225172-0103 Red Aluminum W225172-0104 Blue Aluminum W225172-0107 Green Aluminum
100 100 100 100
With 0.002 Teflon®/0.037 Gray Butyl Liners W225173-12 Natural Aluminum W225173-1203 Red Aluminum W225173-1204 Blue Aluminum W225173-1207 Green Aluminum
1.800.225.1437 (U.S. & Canada only) | +1.856.825.1100 | +1.856.825.1368 (F) | www.wheatonsci.com
100 100 100 100
88
#HROMATOGRAPHY ÂŹAutosampler Vials
89
in
12 x 32 Crimp Vial w/ E-Z Seals
Avanilvaebnlieence
Limited Volume Insert
Co
Packs X MM% :6IALšWITH3NAP2ING #RIMP 4OP
X MM3TANDARD/PENING#RIMP6IAL • • • •
Manufactured from borosilicate glass Use with 11 mm aluminum E-Z Seals™ Limited volume insert Purchase vials and caps separately or together in Convenience Packs
3PECIlCATIONS Diameter x Height ........................................................................12 x 32 mm Vial volume ........................................................................................ 1.5 mL Limited Volume Insert ......................................................... 0.10 and 0.25 mL Crimp cap size ................................................................................... 11 mm
These glass vials are the original design used in most autosamplers. Wheaton standard crimp top vials ensure quality and reliability while maintaining sample integrity. They are manufactured from Type I borosilicate glass and are packaged in shrink-wrapped trays of 100 for convenience and cleanliness. For 11 mm Aluminum E-Z Seals see bottom of this page. Cat. No.
Description
Shelf Pack
Qty/Case
12 x 32 Standard Opening Crimp Vial 223682 223682-01 223692 223692-01
1.5 mL Vial, Clear 1.5 mL Vial, Clear, with Writing Patch 1.5 mL Vial, Amber 1.5 mL Vial, Amber, with Writing Patch
100 100 100 100
1000 1000 1000 1000
— — —
100 100 1000
Limited Volume Insert 225260 225261 225350-531
0.10 mL Glass Insert with Bottom Spring 0.10 mL Polypropylene Insert with Bottom Spring 0.25 mL Glass Flat Bottom Insert
• • • • • •
40% larger opening than standard crimp vials Select from clear or amber borosilicate glass With or without writing patch Accepts snap cap (see page 90) or 11 mm aluminum seal (see page 89) Glass and polypropylene low volume inserts available Purchase vials and snap caps separately or together in Convenience Packs (page 90)
3PECIlCATIONS Diameter x Height ........................................................................12 x 32 mm Vial volume ........................................................................................ 1.8 mL Limited volume insert ............................................... 0.10, 0.25 and 0.35 mL Snap Cap/Crimp Cap size ................................................................... 11 mm
These E-Z Vials can use a plastic snap cap closure, which eliminates the need for crimping and decapping tools. The opening is 40% larger than standard 11 mm ďŹ nish vials. These vials also accept 11 mm aluminum crimp-top E-Z Seals. E-Z Vials are manufactured from Type I borosilicate glass and are packaged in shrink-wrapped trays of 100 for convenience and cleanliness. Cat. No.
Description
Shelf Pack
Qty/Case
E-Z Vial 225179 225179-01 225179-02 225179-03
1.8 mL, Clear 1.8 mL, Clear, with Writing Patch 1.8 mL, Amber 1.8 mL, Amber, with Writing Patch
100 100 100 100
1000 1000 1000 1000
100 — — 200
200 100 100 1000
Limited Volume Inserts
MM!LUMINUM% :3EALS • • • •
Cat. No.
Š
For use with 12 x 32 mm crimp cap vials Large target diameter Available in 4 colors Choice of liner
Description
Shelf Pack
225255 225265 225257 225350-631
0.10 mL Glass Insert with Top Spring 0.25 mL Glass Insert with Bottom Spring 0.25 mL Polypropylene Insert with Bottom Spring 0.35 mL Glass Flat Bottom Insert
See the E-Z Vial with Snap Ring Closures in Convenience Packs listed on page 90.
Qty/Case
With 0.002 TeonŽ/0.038 Red Rubber Liner 224211-01 224211-05 224211-06 224211-07
Natural Aluminum Blue Aluminum Red Aluminum Green Aluminum
100 100 100 100
1000 1000 1000 1000
100 100 100 100
1000 1000 1000 1000
With 0.002 TeonŽ/0.038 Silicone Liner 224219-01 224219-05 224219-06 224219-07
Natural Aluminum Blue Aluminum Red Aluminum Green Aluminum
With 0.002 Red TeonŽ/0.036 Silicone/0.002 Red TeonŽ Liner 224231-01 224231-05 224231-06 224231-07
Natural Aluminum Blue Aluminum Red Aluminum Green Aluminum
100 100 100 100
1000 1000 1000 1000
100
1000
With 0.002 TeonŽ/0.037 Silicone Gray Butyl Liner 224235-01
Natural Aluminum
WHEATON
MM3NAP#APS • • • •
Eliminate the need for crimping and decapping tools Fits the Wheaton E-Z VialsÂŽ with Snap Ring Top Manufactured from polyethylene Choose from 5 colored caps and a variety of septa
Wheaton Snap Caps eliminate the need for crimping and decapping tools. Their unique design is engineered for a positive seal and easy removal. Wheaton Snap Caps are ideal for high-volume, quick turnaround sampling and provide a large target area for needle penetration. They are not recommended for long-term sample retention. Snap Caps are manufactured from polyethylene and are supplied in ďŹ ve different colors with a variety of septa. Caps with starburst slit allow for easy needle penetration.
1.800.225.1437 (U.S. & Canada only) | +1.856.825.1100 | +1.856.825.1368 (F) | www.wheatonsci.com
#HROMATOGRAPHY ¬Autosampler Vials ¬MM¬3NAP¬#APS¬ Cat. No.
Description
Shelf Pack
Qty/Case
With 0.002 Teflon®/0.038 Red Rubber Septa 242786 242786-01 242786-02 242786-04 242786-05
Natural Cap Blue Cap Green Cap Red Cap Yellow Cap
100 100 100 100 100
1000 1000 1000 1000 1000
100 100 100 100 100 100
1000 1000 1000 1000 1000 1000
With 0.002 Teflon®/0.038 Silicone Septa 242775 242776 242776-01 242776-02 242776-04 242776-05
Natural Cap with Slit Natural Cap Blue Cap Green Cap Red Cap Yellow Cap
Organize your 12 x 32 mm vials in the Wheaton autoclavable polypropylene vial rack (Cat. No. 985800). See page 149 for details.
With 0.002 Red Teflon®/0.036 Silicone/0.002 Red Teflon® Septa 242772 242772-01 242772-02 242772-04 242772-05 242772-06
Natural Cap Blue Cap Green Cap Red Cap Yellow Cap Natural Cap with Slit
100 100 100 100 100 100
1000 1000 1000 1000 1000 1000
100
1000
Crimp or decap your 11 mm aluminum seals with the E-Z Crimper (Cat. No. W225301) and the E-Z Decapper (Cat. No. W225351). See page 96.
With 0.010 Teflon® Septa 242782
Natural Cap
ence Conveanciks P
12 x 32 mm Clear Vial with Snap Cap Cat. No. Description
#ONVENIENCE¬0ACKS • 12 x 32 E-Z Vials® & 11 mm Snap Caps packaged together • Choice of clear or amber vials with or without writing patch • Select from 5 colored caps and a variety of liners
The E-Z Vials and Snap Caps are available in Convenience Packs of 100. The clear and amber vials are made of Type I borosilicate glass. The Snap Caps are available in red, blue, yellow, green and natural colors.
WHEATON
With 0.002 Teflon®/0.038 Red Rubber Liners W224620-01 Natural PE Cap W224620-0103 Red PE Cap W224620-0104 Blue PE Cap W224620-0105 Yellow PE Cap W224620-0107 Green PE Cap With 0.002 Teflon®/0.038 Silicone Liners W224620-02 Natural PE Cap W224620-0203 Red PE Cap W224620-0204 Blue PE Cap W224620-0205 Yellow PE Cap W224620-0207 Green PE Cap
Qty/Case
12 x 32 mm Amber Vial with Snap Cap Cat. No. Description
Qty/Case
100 100 100 100 100
With 0.002 Teflon®/0.038 Red Rubber Liners W224622-01 Natural PE Cap W224622-0103 Red PE Cap W224622-0104 Blue PE Cap W224622-0105 Yellow PE Cap W224622-0107 Green PE Cap
100 100 100 100 100
100 100 100 100 100
With 0.002 Teflon®/0.038 Silicone Liners W224622-02 Natural PE Cap W224622-0203 Red PE Cap W224622-0204 Blue PE Cap W224622-0205 Yellow PE Cap W224622-0207 Green PE Cap
100 100 100 100 100
With 0.002 Teflon®/0.036 Silicone/0.002 Teflon® Liners W224620-03 Natural PE Cap 100 W224620-0303 Red PE Cap 100 W224620-0304 Blue PE Cap 100 W224620-0305 Yellow PE Cap 100 W224620-0307 Green PE Cap 100
With 0.002 Teflon®/0.036 Silicone/0.002 Teflon Liners W224622-03 Natural PE Cap W224622-0303 Red PE Cap W224622-0304 Blue PE Cap W224622-0305 Yellow PE Cap W224622-0307 Green PE Cap
100 100 100 100 100
12 x 32 mm Clear Vial with Patch and Snap Cap Cat. No. Description Qty/Case
12 x 32 mm Amber Vial with Patch and Snap Cap Cat. No. Description Qty/Case
With 0.002 Teflon®/0.038 Red Rubber Liners W224621-01 Natural PE Cap W224621-0103 Red PE Cap W224621-0104 Blue PE Cap W224621-0105 Yellow PE Cap W224621-0107 Green PE Cap
100 100 100 100 100
With 0.002 Teflon®/0.038 Red Rubber Liners W224623-01 Natural PE Cap W224623-0103 Red PE Cap W224623-0104 Blue PE Cap W224623-0105 Yellow PE Cap W224623-0107 Green PE Cap
100 100 100 100 100
With 0.002 Teflon®/0.038 Silicone Liners W224621-02 Natural PE Cap W224621-0203 Red PE Cap W224621-0204 Blue PE Cap W224621-0205 Yellow PE Cap W224621-0207 Green PE Cap
100 100 100 100 100
With 0.002 Teflon®/0.038 Silicone Liners W224623-02 Natural PE Cap W224623-0203 Red PE Cap W224623-0204 Blue PE Cap W224623-0205 Yellow PE Cap W224623-0207 Green PE Cap
100 100 100 100 100
With 0.002 Teflon®/0.036 Silicone/0.002 Teflon® Liners W224621-03 Natural PE Cap 100 W224621-0303 Red PE Cap 100 W224621-0304 Blue PE Cap 100 W224621-0305 Yellow PE Cap 100 W224621-0307 Green PE Cap 100
With 0.002 Teflon®/0.036 Silicone/0.002 Teflon® Liners W224623-03 Natural PE Cap 100 W224623-0303 Red PE Cap 100 W224623-0304 Blue PE Cap 100 W224623-0305 Yellow PE Cap 100 W224623-0307 Green PE Cap 100
1.800.225.1437 (U.S. & Canada only) | +1.856.825.1100 | +1.856.825.1368 (F) | www.wheatonsci.com
90
#HROMATOGRAPHY ¬Autosampler Vials
91
(EADSPACE¬6IALS
in
Avanilvaebnlieence Co
(EADSPACE¬6IAL¬ • • • • •
#ONVENIENCE¬0ACKS • Each Convenience Pack includes 100 vials and 100 aluminum seals • Choice of three liners
Packs
Cat. No
Manufactured from clear Type I borosilicate glass Round shoulder and bottom allows for even heating 6 – 20 mL size Accepts 20 mm aluminum seal Purchase vials separately or together with seals in Convenience Packs
W225278-01 W225278-02 W225278-03
Specifications: Diameter x Height 6 mL ................................................................................22 x 38 mm 10 mL ...............................................................................23 x 46 mm 20 mL ..............................................................................23 x 75 mm Aluminum seal size ............................................................................. 20 mm
Size (mL)
225277 225278 225280
6 10 20
Qty/Case
10 mL Vial with 20 mm Aluminum Seal with Teflon®/Silicone Septa 10 mL Vial with 20 mm Aluminum Seal with Teflon®/Gray Butyl Molded Septa 10 mL Vial with 20 mm Aluminum Seal with Aluminum Faced Silicone Septa
100 100 100
20 mL Headspace Vial W225280-01 W225280-02 W225280-03
Wheaton Headspace Vials feature rounded shoulders and bottoms, allowing for even heating and safer operation at higher pressures. The newly designed top provides a tighter seal with your septa. Vials are manufactured from Type I borosilicate glass and accept 20 mm aluminum seals. Cat. No
Description
10 mL Headspace Vial
20 mL Vial with 20 mm Aluminum Seal with Teflon®/Silicone Septa 20 mL Vial with 20 mm Aluminum Seal with Teflon®/Gray Butyl Molded Septa 20 mL Vial with 20 mm Aluminum Seal with Aluminum Faced Silicone Septa
100 100 100
Qty/Case
100 100 100
(EADSPACE¬6IALS (EADSPACE¬0RESSURE¬2ELEASE¬3EALS ¬ ¬MM • • • •
These seals are special crimp closures with bridges and scorelines in the aluminum seal. This design is an added safety feature, allowing the internal pressure to be released when 3.0 +/-0.5 bar has been exceeded. The seals come with Teflon® faced silicone, Teflon® faced grey molded butyl, or aluminum faced silicone liners. They are offered in packs of 100 or can be purchased with vials in Convenience Packs. Description
W224215 W224216 W224217
20 mm Aluminum Seal with Teflon®/Silicone Septa 20 mm Aluminum Seal with Teflon®/Gray Butyl Molded Septa 20 mm Aluminum Seal with Aluminum Faced Silicone Septa
Qty/Case
100 100 100
Organize your headspace vials in the Wheaton autoclavable 36-position vial rack (Cat. No. 868805). See page 149 for details. WHEATON
Manufactured from clear Type I borosilicate glass 20 mL size Accepts 20 mm aluminum seal Seal, septa and stopper sold separately
Specifications: Diameter x Height ....................................................................23.5 x 75 mm Aluminum seal size ............................................................................ 20 mm
20 mm crimp closure with liner for headspace vials Score lines allow for internal pressure release Choice of three liner options Purchase seals separately or together with Vials in Convenience Packs
Cat. No
• • • •
This 20 mL vial fits most headspace analyzers. It is manufactured from Type I borosilicate glass and sold in convenient shrink-wrapped trays. Unlined aluminum seals are available in open top or center disc tear-out styles. Aluminum seals, stopper and septa are sold separately. Cat. No
Description
985688
20 mL Headspace Vial
Qty/Case
960
Unlined Aluminum Seals 224178-01 224183-01
20 mm Open Top 20 mm Center Disc Tear-Out
1000 1000
20 mm Gray Butyl Stopper 20 mm Teflon®/Silicone Septa 20 mm Teflon® Faced Gray Butyl Septa
1000 100 100
Stoppers/Septa 224100-181 224173 224168*
*This item is a specially molded septa with a Teflon® insert. The sealing surface of butyl and Teflon® effect a more positive seal than plain Teflon® faced septa.
1.800.225.1437 (U.S. & Canada only) | +1.856.825.1100 | +1.856.825.1368 (F) | www.wheatonsci.com
#HROMATOGRAPHY ¬Autosampler Vials ,6)©¬6IALS
in
Avanilvaebnlieence Co
©
¬X¬ ¬MM¬,6) ¬6IAL • • • • •
Packs
Borosilicate glass vial with 300 μL glass limited volume insert Limited Volume Insert is fused to vial which prevents needle damage Writing patch on all vials Crimp or screw cap finish Purchase vials and caps separately or together in Convenience Packs
The LVI Vials are 12 x 32 mm large opening vials with a sealed-in, limited volume insert. The manufacturing process precisely controls the depth and position of the insert relative to the bottom of the vial. This allows more consistent sample recovery from vial to vial and reduces the possibility of autosampler needle damage. The insert has a slight flare at the top, providing a larger needle target area, which prevents needle damage. The LVI Vials have a 300 μL capacity with a residual volume of only 4 μL, depending on the solvent, needle style and depth adjustment of the autosampler. All LVI Vials are supplied with a white ceramic “write-on” patch for easier sample identification and are compatible with all autosamplers that use 12 x 32 mm vials. Inserts and clear vials are manufactured from ASTM Type I, Class A borosilicate glass. Amber vials are manufactured from borosilicate glass. The LVI Vials are available with either an 11 mm crimp top finish, which can be used with all standard 11 mm aluminum seals, or with Wheaton’s special 9 mm ABC screw thread. For 11 mm E-Z Seals™ see page 89, and for 9 mm ABC Screw Caps see page 94. Cat. No.
Description
225220-01 225221-01
0.3 mL LVI Vial, Clear with Writing Patch 0.3 mL LVI Vial, Amber with Writing Patch
Specifications:
9 mm ABC Screw Thread Vial
Diameter x Height ........................................................................... 12 x 32 mm Volume: Vial with insert .............................................................................300 μL Crimp Seal Size .......................................................................................11 mm ABC Screw Cap Size ..................................................................................9 mm
225326 225328
#ONVENIENCE¬0ACKS
Qty/Case
11 mm Crimp Top Vial
0.3 mL LVI Vial, Clear with Writing Patch 0.3 mL LVI Vial, Amber with Writing Patch
100 100 100 100
For 11 mm E-Z Seals see page 89, and for 9 mm ABC Screw Caps see page 94.
With 0.002 Teflon®/0.037 Gray Butyl Liners W225223-12 Natural Aluminum W225223-1203 Red Aluminum W225223-1204 Blue Aluminum W225223-1207 Green Aluminum
100 100 100 100
12 x 32 Amber LVI Vial with 11 mm E-Z Aluminum Seal Cat. No. Description Qty/Case With 0.002 Teflon®/0.037 Red Rubber Liners W225225-01 Natural Aluminum W225225-0103 Red Aluminum W225225-0104 Blue Aluminum W225225-0107 Green Aluminum
100 100 100 100
With 0.005 Red Teflon®/0.050 Silicone Liners W225225-02 Natural Aluminum W225225-0203 Red Aluminum W225225-0204 Blue Aluminum W225225-0207 Green Aluminum
100 100 100 100
With 0.005 Red Teflon®/0.035 Silicone/0.005 Teflon® Liners W225326-03 Natural PP ABC Cap 100 W225326-0301 Black PP ABC Cap 100 With 0.005 Blue Teflon®/0.035 Silicone Liners W225326-04 Natural PP ABC Cap W225326-0401 Black PP ABC Cap
100 100
With 0.010 Teflon® Liners W225326-06 Natural PP ABC Cap W225326-0601 Black PP ABC Cap
100 100
With 0.005 Red Teflon®/0.035 Silicone Liners with Slit W225326-08 Natural PP ABC Cap 100 W225326-0801 Black PP ABC Cap 100 12 x 32 Amber LVI Vial with 9 mm ABC Screw Cap Cat. No. Description Qty/Case
With 0.005 Teflon®/0.035 Red Rubber Liners W225328-01 Natural PP ABC Cap 100 W225328-0101 Black PP ABC Cap 100 ™ • 12 x 32 LVI Vial & 11 mm Aluminum E-Z Seal With 0.005 Red Teflon®/0.050 Silicone/0.005 Red Teflon® Liners W225328-0103 Red PP ABC Cap 100 • 12 x 32 LVI Vial & 9 mm ABC Screw Cap W225225-03 Natural Aluminum 100 W225328-0104 Blue PP ABC Cap 100 W225225-0303 Red Aluminum 100 W225328-0105 Yellow PP ABC Cap LVI Vials and 11 mm Aluminum Seals and/or 9 mm 100 W225225-0304 Blue Aluminum 100 W225328-0107 Green PP ABC Cap ABC Screw Caps are available together in 100 100 Convenience Packs of 100. The clear and amber vials W225225-0307 Green Aluminum With 0.005 Red Teflon®/0.035 Silicone Liners with a sealed-in, limited volume 300 μL insert are With 0.002 Teflon®/0.037 Gray Butyl Liners W225328-02 Natural PP ABC Cap 100 made of Type I borosilicate glass and have a white W225225-12 Natural Aluminum 100 W225328-0201 Black PP ABC Cap 100 ceramic “write-on” patch. W225225-1203 Red Aluminum 100 W225328-0203 Red PP ABC Cap 100 W225225-1204 Blue Aluminum 100 W225328-0204 Blue PP ABC Cap 100 W225225-1207 Green Aluminum 100 W225328-0205 Yellow PP ABC Cap 100 12 x 32 Clear LVI Vial with 11 mm E-Z Aluminum Seal W225328-0207 Green PP ABC Cap 100 12 x 32 Clear LVI Vial with 9 mm ABC Screw Cap Cat. No. Description Qty/Case With 0.005 Red Teflon®/0.035 Silicone/0.005 Teflon® Liners Cat. No. Description Qty/Case With 0.002 Teflon®/0.037 Red Rubber Liners W225328-03 Natural PP ABC Cap 100 W225223-01 Natural Aluminum 100 With 0.005 Teflon®/0.035 Red Rubber Liners W225328-0301 Black PP ABC Cap 100 Natural PP ABC Cap 100 W225223-0103 Red Aluminum 100 W225326-01 With 0.005 Blue Teflon®/0.050 Silicone Liners 100 W225223-0104 Blue Aluminum 100 W225326-0101 Black PP ABC Cap W225328-04 Natural PP ABC Cap 100 100 W225223-0107 Green Aluminum 100 W225326-0103 Red PP ABC Cap W225328-0401 Black PP ABC Cap 100 W225326-0104 Blue PP ABC Cap 100 ® With 0.005 Red Teflon /0.050 Silicone Liners ® With 0.010 Teflon Liners 100 W225223-02 Natural Aluminum 100 W225326-0105 Yellow PP ABC Cap Natural PP ABC Cap 100 100 W225328-06 W225223-0203 Red Aluminum 100 W225326-0107 Green PP ABC Cap W225328-0601 Black PP ABC Cap 100 ® W225223-0204 Blue Aluminum 100 With 0.005 Red Teflon /0.035 Silicone Liners ® With 0.005 Red Teflon /0.035 Silicone Liners with Slit W225326-02 Natural PP ABC Cap 100 W225223-0207 Green Aluminum 100 Natural PP ABC Cap 100 100 W225328-08 With 0.005 Red Teflon®/0.040 Silicone/0.005 Red Teflon® Liners W225326-0201 Black PP ABC Cap W225328-0801 Black PP ABC Cap 100 W225326-0203 Red PP ABC Cap 100 W225223-03 Natural Aluminum 100 W225326-0204 Blue PP ABC Cap 100 W225223-0303 Red Aluminum 100 100 W225223-0304 Blue Aluminum 100 W225326-0205 Yellow PP ABC Cap 100 W225223-0307 Green Aluminum 100 W225326-0207 Green PP ABC Cap
WHEATON
1.800.225.1437 (U.S. & Canada only) | +1.856.825.1100 | +1.856.825.1368 (F) | www.wheatonsci.com
92
93
#HROMATOGRAPHY Autosampler Vials 0LASTIC6IALS X MM0OLYPROPYLENE 6IALWITH ,)NSERT • • • •
Manufactured from polypropylene 300 ÎźL conical interior reduces sample size Available with snap/crimp or screw top ďŹ nish 100 vials per shelf pack/1000 vials per case 500 ÎźL Vial with Screw Cap Finish
500 ÎźL Vial with Snap Cap Finish
750 ÎźL Vial with Screw Cap
750 ÎźL Vial with Snap Cap Finish
ÂŹXÂŹ ÂŹ0OLYPROPYLENEÂŹ6IALÂŹWITHÂŹ)NSERT SpeciďŹ cations: Diameter x Height .......................................................................12 x 32 mm Vial Volume: ....................................................................................... 300 ÎźL Snap/Crimp Seal Size ........................................................................ 11 mm ABC Screw Cap Size ............................................................................ 9 mm Traditional Screw Cap Size ..................................................................8-425 Wheaton 12 x 32 mm polypropylene vials can be used in most standard gas and liquid chromatography autosamplers. These lightweight, economical vials are made from durable polypropylene which has good chemical resistance. The conical interior ensures maximum retrieval of contents without the hassle of using removable inserts. Vials are available with snap/crimp, ABC screw cap and traditional screw cap ďŹ nish. Cat. No
Closure Style
Closure Size
For Closures See
11 mm 9 mm 8-425
Page 89-90 Page 94 Page 95
Shelf Pack Qty/Case
Polypropylene Vial 225180 W225181 225185
Snap/Crimp Finish ABC Screw Top Cap Screw Top Cap
100 100 100
1000 1000 1000
X 'LASS 0LASTIC 6IALWITH M,)NSERT • • • •
• • • •
Manufactured from polypropylene 500 or 750 ÎźL conical interior reduces sample size Available with snap/crimp or screw top ďŹ nish 100 vials per shelf pack/1000 vials per case
SpeciďŹ cations: Diameter x Height .......................................................................12 x 32 mm Vial Volume ............................................................................. 500 or 750 ÎźL Snap/Crimp Seal Size ........................................................................ 11 mm Traditional Screw Cap Size ................................................................10-425 The Wheaton polypropylene snap cap vial uses either aluminum crimp seals or plastic snap cap closures, which eliminate the need for crimping and decapping tools, and provide a larger target area. The unique cone-shaped bottom ensures maximum sample retrieval. The snap/crimp top vial uses 11 mm seals. The traditional screw thread vials accept 10-425 screw thread caps. Cat. No
Closure Style
Closure Size
For Closures See
Shelf/Pack Qty/Case
Vial with 500 ÎźL Conical Interior W225186 W225187
Screw Thread Finish 10-425 Snap/Crimp Finish 11 mm
Page 96 Page 89-90
100 100
1000 1000
Page 89-90 Page 96
100 100
1000 1000
Vial with 750 ÎźL Conical Interior 225235 W225237
Snap/Crimp Finish 11 mm Screw Thread Finish 10-425
Thermoplastic polymer outer shell 0.1 mL Type I borosilicate glass insert Available with snap/crimp or screw top ďŹ nish 100 vials per case
SpeciďŹ cations: Diameter x Height .......................................................................12 x 32 mm Vial Volume: ....................................................................................... 100 ÎźL Snap/Crimp Seal Size ........................................................................ 11 mm Traditional Screw Cap Size ...................................................................8-425 Wheaton 0.1 mL plastic autosampler vials, with glass inner cone, combine Type I borosilicate glass and thermoplastic polymer outer vial shells. The glass is the only contact between your sample and the seal. The thermoplastic polymer provides not only excellent dimensional tolerance reliability for capping and instrumentation use, but safety from breakage as well. Vials are available with snap/crimp top or traditional screw cap ďŹ nish.
(IGHÂŹ2ECOVERYÂŹ6IAL ÂŹ ÂŹXÂŹ ÂŹMM
Cat. No
This High Recovery Vial features a one piece glass design with a conical bottom for complete sample recovery. Reactions and concentrations can be performed directly in the sampling vial, eliminating the need for sample transfer. Use the 9 mm ABC Screw Caps found on page 94 with the screw thread vial, and use the 11 mm Aluminum E-Z Seals™ on page 89 with the crimp top vial.
Closure Style
Closure Size
For Closures See
Qty/Case
Snap/Crimp Finish Screw Top Finish
11 mm 8-425
Page 89-90 Page 95
100 100
Snap/Crimp Finish Screw Top Finish
11 mm 8-425
Page 89-90 Page 95
100 100
Clear Vial 225190 225195
Amber Vial 225200 225205
WHEATON
• • • •
12 x 32 mm glass vial with conical bottom Ideal for use in autosamplers Screw cap or crimp cap ďŹ nish See closures on pages 89 and 94
Cat. No.
Description
W225149 W225171
1.5 mL, 9 mm ABC Screw Thread Finish 1.5 mL, 11 mm Crimp Top Finish
1.800.225.1437 (U.S. & Canada only) | +1.856.825.1100 | +1.856.825.1368 (F) | www.wheatonsci.com
Qty/Case
100 100
#HROMATOGRAPHY ¬Autosampler Vials 3CREW¬#AP¬6IALS
!"#¬3CREW¬#APS • Manufactured from Polypropylene • Low extractable septa • 100/pack with 10 packs/case
in
Avanilvaebnlieence Co
ABC Vials & Caps
Packs
The closures for the ABC Vials feature the Wheaton “Super Septa”, low extractable septa that is optimal for GC/MS. Screw caps are available in natural, black, red, blue, yellow or green polypropylene. The screw caps are packaged 100 per shelf pack, 1000 per case.
Limited Volume Insert
¬X¬ ¬MM¬!"#¬6IAL© • • • • •
Cat. No.
40% larger opening than standard vials Manufactured from clear and amber Type I borosilicate glass Limited volume inserts 9 mm screw thread Use with Wheaton ABC Screw Caps
Wheaton ABC Vials have a 40% wider opening than standard screw top vials as well as superior thread design that allows for a more secure seal to the closure. The closures for the ABC Vials feature the Wheaton “Super Septa”, a low extractable septa that is optimal for GC/MS. ABC Vials have a capacity of 1.8 mL and are manufactured from Type I borosilicate glass. Vials are packaged 100 per shelf pack and 10 packs per case. Specifications: Diameter x Height ........................................................................12 x 32 mm Vial volume ........................................................................................ 1.8 mL Limited volume insert ................................................... 0.10, 0.25 & 0.35 mL ABC cap size ......................................................................................... 9 mm Cat. No.
Description
Shelf Pack
Qty/Case
ABC Vial W225149 W225150 W225151 W225152 W225153
1.5 mL, Clear 1.8 mL, Clear 1.8 mL, Clear with Writing Patch 1.8 mL, Amber 1.8 mL, Amber with Writing Patch
— 100 100 100 100
100 1000 1000 1000 1000
— 100 — — 200
100 200 100 100 1000
Limited Volume Inserts W225171 225255 225265 225257 225350-631
1.5 mL, Clear with Aluminum Seal Finish 0.10 mL Glass Insert with Top Spring 0.25 mL Glass Insert with Bottom Spring 0.25 mL Polypropylene Insert with Bottom Spring 0.35 mL Glass Flat Bottom Insert
#ONVENIENCE¬0ACKS ABC Vials and 9 mm ABC Screw Caps are available together in convenience packs of 100. The clear and amber vials are made of Type I borosilicate glass. The 1.8 ml vials are packaged in a recyclable PETE clamshell case to help prevent particulate contamination. The ABC Screw Caps are available in six colors.
Description
Shelf Pack
Qty/Case
With 0.005 Teflon®/0.035 Red Rubber Liner W225331-01 W225331-0101 W225331-0103 W225331-0104 W225331-0105 W225331-0107
Natural PP ABC Cap Black PP ABC Cap Red PP ABC Cap Blue PP ABC Cap Yellow PP ABC Cap Green PP ABC Cap
100 100 100 100 100 100
1000 1000 1000 1000 1000 1000
100 100 100 100 100 100
1000 1000 1000 1000 1000 1000
100 100
1000 1000
100 100
1000 1000
100 100
1000 1000
100 100
1000 1000
With 0.005 Teflon®/0.035 Silicone Liner W225332-02 W225332-0201 W225332-0203 W225332-0204 W225332-0205 W225332-0207
Natural PP ABC Cap Black PP ABC Cap Red PP ABC Cap Blue PP ABC Cap Yellow PP ABC Cap Green PP ABC Cap
With 0.005 Teflon®/0.035 Silicone/0.005 Teflon Liner W225333-03 W225333-0301
Natural PP ABC Cap Black PP ABC Cap
With 0.005 Blue Teflon®/0.035 Silicone Liner W225334A-04 W225334A-0401
Natural PP ABC Cap Black PP ABC Cap
With 0.005 Red Teflon®/0.035 Silicone Liner with Slit W225338-08 W225338-0801
Natural PP ABC Cap Black PP ABC Cap
With 0.010 Teflon® Liner W225336-06 W225336-0601
Natural PP ABC Cap Black PP ABC Cap
12 x 32 Clear ABC Vials & 9 mm ABC Screw Caps Cat. No. Description Qty/Case
12 x 32 Clear ABC Vials & 9 mm ABC Screw Caps Cat. No. Description Qty/Case
With 0.005 Teflon®/0.035 Red Rubber Liners W225150-01 Natural PP ABC Cap W225150-0101 Black PP ABC Cap W225150-0103 Red PP ABC Cap W225150-0104 Blue PP ABC Cap W225150-0105 Yellow PP ABC Cap W225150-0107 Green PP ABC Cap
With 0.005 Red Teflon®/0.035 Silicone/0.005 Red Teflon® Liners
100 100 100 100 100 100
With 0.005 Red Teflon®/0.035 Silicone Liners W225150-02 Natural PP ABC Cap W225150-0201 Black PP ABC Cap W225150-0203 Red PP ABC Cap W225150-0204 Blue PP ABC Cap W225150-0205 Yellow PP ABC Cap W225150-0207 Green PP ABC Cap
100 100 100 100 100 100
W225150-03 W225150-0301
Natural PP ABC Cap Black PP ABC Cap
With 0.005 Blue Teflon®/0.035 Silicone Liners W225154-04 Natural PP ABC Cap W225154-0401 Black PP ABC Cap
100 100 100 100
With 0.005 Red Teflon®/0.035 Silicone Liners with Slit W225150-08 Natural PP ABC Cap 100 W225150-0801 Black PP ABC Cap 100 With 0.010 Teflon® Liners W225150-06 Natural PP ABC Cap W225150-0601 Black PP ABC Cap
100 100
ABC Vial Convenience Packs are continued on page 95. WHEATON
1.800.225.1437 (U.S. & Canada only) | +1.856.825.1100 | +1.856.825.1368 (F) | www.wheatonsci.com
94
95
#HROMATOGRAPHY ¬Autosampler Vials
12 x 32 Clear ABC Vial with Patch & 9 mm ABC Screw Cap Cat. No. Description Qty/Case
12 x 32 Amber ABC Vial with 9 mm ABC Screw Cap Cat. No. Description Qty/Case
12 x 32 Amber ABC Vial with Patch & 9 mm ABC Screw Cap Cat. No. Description Qty/Case
With 0.005 Teflon®/0.035 Red Rubber Liners W225151-01 Natural PP ABC Cap W225151-0101 Black PP ABC Cap W225151-0103 Red PP ABC Cap W225151-0104 Blue PP ABC Cap W225151-0105 Yellow PP ABC Cap W225151-0107 Green PP ABC Cap
100 100 100 100 100 100
With 0.005 Teflon®/0.035 Red Rubber Liners W225152-01 Natural PP ABC Cap W225152-0101 Black PP ABC Cap W225152-0103 Red PP ABC Cap W225152-0104 Blue PP ABC Cap W225152-0105 Yellow PP ABC Cap W225152-0107 Green PP ABC Cap
100 100 100 100 100 100
With 0.005 Teflon®/0.035 Red Rubber Liners W225153-01 Natural PP ABC Cap W225153-0101 Black PP ABC Cap W225153-0103 Red PP ABC Cap W225153-0104 Blue PP ABC Cap W225153-0105 Yellow PP ABC Cap W225153-0107 Green PP ABC Cap
100 100 100 100 100 100
With 0.005 Red Teflon®/0.035 Silicone Liners W225151-02 Natural PP ABC Cap W225151-0201 Black PP ABC Cap W225151-0203 Red PP ABC Cap W225151-0204 Blue PP ABC Cap W225151-0205 Yellow PP ABC Cap W225151-0207 Green PP ABC Cap
100 100 100 100 100 100
With 0.005 Red Teflon®/0.035 Silicone Liners W225152-02 Natural PP ABC Cap W225152-0201 Black PP ABC Cap W225152-0203 Red PP ABC Cap W225152-0204 Blue PP ABC Cap W225152-0205 Yellow PP ABC Cap W225152-0207 Green PP ABC Cap
100 100 100 100 100 100
With 0.005 Red Teflon®/0.035 Silicone Liners W225153-02 Natural PP ABC Cap W225153-0201 Black PP ABC Cap W225153-0203 Red PP ABC Cap W225153-0204 Blue PP ABC Cap W225153-0205 Yellow PP ABC Cap W225153-0207 Green PP ABC Cap
100 100 100 100 100 100
With 0.005 Red Teflon® 0.035 Silicone/ /0.005 Red Teflon® Liners W225151-03 Natural PP ABC Cap W225151-0301 Black PP ABC Cap
100 100
With 0.005 Red Teflon®/0.035 Silicone /0.005 Red Teflon® Liners W225152-03 Natural PP ABC Cap W225152-0301 Black PP ABC Cap
100 100
With 0.005 Red Teflon®/0.035 Silicone /0.005 Red Teflon® Liners W225153-03 Natural PP ABC Cap W225153-0301 Black PP ABC Cap
100 100
With 0.005 Blue Teflon®/0.035 Silicone Liners W225151-04 Natural PP ABC Cap W225151-0401 Black PP ABC Cap
100 100
With 0.005 Blue Teflon®/0.035 Silicone Liners W225156-04 Natural PP ABC Cap W225156-0401 Black PP ABC Cap
100 100
With 0.005 Blue Teflon®/0.035 Silicone Liners W225157-04 Natural PP ABC Cap W225157-0401 Black PP ABC Cap
100 100
With 0.005 Red Teflon®/0.035 Silicone Liners with Slit W225151-08 Natural PP ABC Cap 100 W225151-0801 Black PP ABC Cap 100
With 0.005 Red Teflon®/0.035 Silicone Liners with Slit W225152-08 Natural PP ABC Cap 100 W225152-0801 Black PP ABC Cap 100
With 0.005 Red Teflon®/0.035 Silicone Liners with Slit W225153-08 Natural PP ABC Cap 100 W225153-0801 Black PP ABC Cap 100
With 0.010 Teflon® Liners W225151-06 Natural PP ABC Cap W225151-0601 Black PP ABC Cap
With 0.010 Teflon® Liners W225152-06 Natural PP ABC Cap W225152-0601 Black PP ABC Cap
With 0.010 Teflon® Liners W225153-06 Natural PP ABC Cap W225153-0601 Black PP ABC Cap
100 100
100 100
100 100
in
Avanilvaebnlieence Co
Standard Screw Top Vial
¬X¬ ¬MM¬¬ 3CREW¬4OP¬6IAL ¬¬ 3TANDARD¬/PENING
Packs
Limited Volume Insert
• Manufactured from clear and amber Type I borosilicate glass • Limited volume inserts • Pre-assembled black polypropylene screw cap with septa • Screw cap and septa available separately • Purchase vials and caps separately or together in Convenience Packs
These glass vials are the original design used in most autosamplers requiring traditional screw top vials. The vials are manufactured from Type I borosilicate glass. Vials are packaged 100 per shelf pack and 10 packs per case. Glass limited volume inserts are available with flat bottoms or springs. The black polypropylene screw caps can be purchased separately or preassembled. For quick and easy preparation, purchase vials and caps together in Wheaton Convenience Packs. Specifications: Diameter x Height ........................................................................12 x 32 mm Vial volume ........................................................................................ 1.8 mL Limited volume insert ........................................................... 0.10 & 0.25 mL Screw cap size .....................................................................................8-425
WHEATON
Cat. No.
Description
Cap Size
Shelf Pack
8-425 8-425
100 100
Qty/Case
12 x 32 mm Screw Top Vials W225900 W225910
1.8 mL, Clear 1.8 mL, Amber
Cat. No.
Description
Shelf Pack
1000 1000 Qty/Case
Limited Volume Inserts 225260 0.10 mL Glass Insert with Bottom Spring 225350-531 0.25 mL Glass Flat Bottom Insert
— 200
100 1000
—
100
100
1000
8-425 Black Phenolic Cap 8-425 Black Phenolic Cap (Shimadzu)
— —
200 200
8 mm Red Teflon® Faced Silicone 8 mm Teflon® Faced Silicone
— —
100 100
Preassembled Open Top Caps and Septa 240602 242245
8-425 Black Polypropylene Cap with Teflon®/Silicone Liner 8-425 Black Top Seal Cap with Natural Polypropylene, 10 mil Septa
Open Top Caps W240506 W240507
Septa W240580 W240581
Convenience Packs 225170 224950
1.8 mL Clear Vial with Unassembled Cap and Septa 240 1.8 mL Clear Vial in Vial File with Preassembled Cap and Septa 60
1.800.225.1437 (U.S. & Canada only) | +1.856.825.1100 | +1.856.825.1368 (F) | www.wheatonsci.com
#HROMATOGRAPHY ¬Autosampler Vials
¬X¬ ¬MM¬3CREW¬4OP¬% :¬6IAL ¬WITH¬3TEP¬ • • • •
¬X¬ ¬MM¬3CREW¬4OP¬6IAL
Manufactured from clear and amber Type I borosilicate glass Limited volume inserts Pre-assembled black polypropylene screw cap with septa Purchase vials and caps separately
Wheaton Screw Top E-Z Vials with Step, feature a large opening with a long neck for greater sample accessibility with reduced needle damage. Vial capacity has been increased to 1.8 mL. The innovative design of the vial and limited volume insert enables the insert to be precisely centered inside the neck of the vial. The Screw Top E-Z Vials with Step are designed to use 10-425 screw caps. Vials are manufactured from Type I borosilicate glass and are packaged in shrink-wrapped trays of 100 for convenience and cleanliness. Screw caps and septa available separately. Specifications: Diameter x Height ........................................................................12 x 32 mm Vial volume ........................................................................................ 1.8 mL Limited volume insert ...................................................................... 0.25 mL Screw cap size....................................................................................10-425 Cat. No.
Description
Shelf Pack
Qty/Case
12 x 32 Screw Top E-Z Vials with Step 224626 224627 224628 224629
1.8 mL with Step, Clear 1.8 mL with Step, Clear with Writing Patch 1.8 mL with Step, Amber 1.8 mL with Step, Amber with Writing Patch
100 100 100 100
96
1000 1000 1000 1000
• • • •
Manufactured from clear and amber Type I borosilicate glass Limited volume inserts Pre-assembled black polypropylene screw cap with septa Purchase vials and caps separately
Specifications: Diameter x Height ........................................................................15 x 45 mm Vial volume ......................................................................................... 4.0 mL Limited volume insert ...................................................................... 0.30 mL Screw cap size....................................................................................13-425 Wheaton 15 x 45 Screw Top Vials are designed primarily for use in the Waters WISP® 48-position and other autosamplers. The vials are manufactured from Type I borosilicate glass and packaged in shrink-wrapped trays of 100 for convenience and cleanliness. Screw caps and septa available separately. Cat. No.
Description
Shelf Pack
Qty/Case
15 x 45 mm Screw Top Vials 224794 224794-01 224795 224795-01 Cat. No.
4.0 mL, Clear 4.0 mL, Clear with Writing Patch 4.0 mL, Amber 4.0 mL, Amber with Writing Patch
100 100 100 100
Description
1000 1000 1000 1000 Qty/Case
Limited Volume Inserts Cat. No.
Description
Qty/Case
225258 225259
225268
0.30 mL Glass Insert with Bottom Spring
100
Preassembled Open Top Caps and Septa
Limited Volume Inserts 0.25 mL Glass Insert for Vial with Step 0.25 mL Polypropylene Insert for Vial with Step
100 100
242768 242247
13-425 Black Polypropylene Cap with PTFE/Silicone Liner 13-425 Top Seal Cap with Natural Polypropylene, 10 mil Septa
100 1000
Preassembled Open Top Caps and Septa 242760 242761 242762 242766
10-425 Black Polypropylene Cap with Teflon® Red Rubber 10-425 Black Polypropylene Cap with Teflon®/Silicone/Teflon® 10-425 Black Polypropylene Cap with Teflon®/Silicone 10-425 Top Seal with Natural Polypropylene, 10 mil Septa
100 100 100 1000
Solid Top Caps 242765
10-425 Black Polypropylene Unlined Cap
1000
#HROMATOGRAPHY¬!CCESSORIES % :¬#RIMPERS© • Crimps aluminum seals to autosampler vials • Cushioned ergonomic handle • Labeled with size for quick size identification • Polished crimping jaws for consistent sealing
% :¬$ECAPPERS©¬ • Removes aluminum seals from autosampler vials • Cushioned ergonomic handle • Labeled with size for quick size identification For more details on this product see page 35
For more details on this product see page 35
Cat. No.
Description
W225300 W225301 W225302 W225303
E-Z Crimper, 8 mm E-Z Crimper, 11 mm E-Z Crimper, 13 mm E-Z Crimper, 20 mm
WHEATON
Qty/Case
1 1 1 1
Cat. No.
Description
W225350 W225351 W225352 W225353
Decapper, 8 mm Decapper, 11 mm Decapper, 13 mm Decapper, 20 mm
1.800.225.1437 (U.S. & Canada only) | +1.856.825.1100 | +1.856.825.1368 (F) | www.wheatonsci.com
Qty/Case
1 1 1 1
#HROMATOGRAPHY ¬LC & TLC
97
3TAINING¬*AR¬
,#¬#OLUMNS
• Manufactured from soda-lime glass • Holds 5 small TLC plates • Includes glass lid
The staining jar is designed with an extra tall lid to accept five single 25 x 75 mm to 25 x 100 mm slides or 10 slides back to back
#HROMATOGRAPHY¬#OLUMN • • • •
Manufactured from Type I borosilicate glass 13-425 screw threads on both ends 50 and 100 mm length Suitable for aqueous or organic applications
Cat. No.
Internal Dimensions, L x W x H (mm)
276840
26 x 26 x 90
ID x Length (mm)
265318 265320
8 x 50 8 x 100
Screw Thread Size
• Made from soda-lime glass • Holds 8 small TLC plates • Includes glass lid
Qty/Case
13-425 13-425
6
3TAINING¬$ISH¬
These general purpose columns are suitable for a wide variety of separations using either aqueous or organic solvents. They are manufactured from Type I, Class A borosilicate glass. Cat. No.
Qty/Case
1 1
$EVELOPING¬#HAMBERS This Hellendahl-type dish can be used for staining or as a TLC developing chamber. It holds eight individual 3” x 1” (75 mm x 25 mm) slides or, if necessary, 16 slides back-to-back.
-INI 4,#¬¬ $EVELOPING¬#HAMBER¬ • Manufactured from Type I borosilicate glass • Includes glass cover • Autoclavable
The Wheaton Mini-TLC is useful for developing pre-scored or smaller-size TLC plates. This chamber is ideal for pilot studies, monitoring organic reactions and determining mobile phase composition in HPLC separations. It is engineered to reduce the consumption of solvent necessary to saturate the chamber. The Mini-TLC Chamber is manufactured from Type I, Class A borosilicate glass. Cat. No.
Dia x H (mm)
276845 276850
60 x 105 60 x 205
Cat. No.
Internal Dimensions, L x W x H (mm)
900630
76 x 25 x 75
Qty/Case
6
¬ 3AMPLE¬2ECOVERY¬4UBES¬¬ ¬2EAGENT¬3PRAYERS 4,#¬¬ 3AMPLE¬2ECOVERY¬4UBE¬
Qty/Case
6 3
• Adjustable length • Grease-free Wheaton Connection®
4,#¬'LASS¬¬ $EVELOPING¬#HAMBER¬ • Holds plates up to 20 x 20 cm in size • Made from soda-lime glass • Ground glass cover securely fits chamber to reduce solvent evaporation • Autoclavable
This convenient, pencil-like device is designed for the removal of sample from a developed TLC plate by vacuum. The sample is trapped on the sealed-in frit and eluted with solvent for sample analyte recovery. All wetted parts are Wheaton 33 low extractable borosilicate glass (conforms ASTM Type I, Class A and USP Type I requirements) or Teflon®. All screw threads are 13-425 size. The length of the recovery tube is adjustable. The approximate pore size of the fritted funnel is 40 to 60 microns.
This sturdy chamber accommodates standard 20 x 20 cm thin layer chromatography plates. The top surface is ground to a precise tolerance to provide a secure sealing area and to ensure both chamber saturation and optimum plate development. It comes complete with a glass lid. Cat. No.
Internal Dimensions, L x W x H (cm)
276860
27 x 7 x 24
WHEATON
Qty/Case
Cat. No.
Description
1
277930 277935
TLC Sample Recovery Tube Replacement Glass Tip
1.800.225.1437 (U.S. & Canada only) | +1.856.825.1100 | +1.856.825.1368 (F) | www.wheatonsci.com
Qty/Case
1 2
#LOSURES¬ ¬#OMPOUND¬3TORAGE
E-Z Ex-Traction® High Recovery Vials
4,#¬2EAGENT¬3PRAYER¬ • • • •
Atomizes chromagenic reagents Finger vent provides spray control Available with 125 or 250 mL reservoir Wheaton Standard Taper 19/22 Clear-Seal® Joint
The TLC Reagent Sprayer atomizes chromagenic reagents into a very fine mist, making it ideal for spraying reagents on TLC and paper chromatograms. These sprayers come with a convenient finger vent for instant spray control. Requires 10 psi air pressure. Cat. No.
Description
279040 279045 635920 279041 635921
Complete Unit Sprayer Head Only Flask Only Complete Unit Flask Only
Size (mL)
Qty/Case
125 125 125 250 250
1 1 1 1 1
0RECISION¬¬ %NGINEERED¬#ONTAINERS¬¬ $ESIGNED¬FOR¬#OMPOUND¬-ANAGEMENT • Conical well design with exacting dimensions ensures maximum recovery of high value samples • Manufactured to extremely tight tolerances for reliable operation in automated sample handling and storage systems • SciLutions® customized services including bar coding, critical cleaning, surface treatment, and taring
#HROMATOGRAPHIC¬3PRAY¬"OTTLE¬ • Atomizes chromagenic reagents • Finger vent provides spray control • 65 mL reservoir
• Custom vial configurations available
This economical chromatographic sprayer produces the very fine uniform mist (with no droplets) that is required for TLC and paper chromatography. Made from Type I borosilicate glass, it features a convenient finger vent for instant spray control. Requires 10 psi air pressure. Cat. No.
Size (mL)
279050
65
Ideal for compound management applications, the new Wheaton E-Z Ex-Traction Vials® are available in 2, 4, 8,10, and 20 mL sizes. Also available in amber glass upon request.
Qty/Case
#LOSURES
1
For more information see page 143 or visit our web site www.wheatonvial.com.
For a complete list of aluminum seals, rubber stoppers, septa and screw caps, see the Cap and Closure Section on pages 31-42.
350%2)/2¬02/$5#43¬¬¬s¬¬¬02/6%.¬15!,)49 %8#%04)/.!,¬3500/24 WHEATON
1.800.225.1437 (U.S. & Canada only) | +1.856.825.1100 | +1.856.825.1368 (F) | www.wheatonsci.com
98
99
$ISPENSERS ¬Bottle Top
W
heaton/Socorex Bottle Top Dispensers have a sophisticated yet simple design that provides easy operation, superior safety, and low maintenance. They are accurate enough to use in research yet rugged enough to use in student labs. Our bottle top dispensers provide the following features: •
Solid Calibration® provides consistent volumes now and in the future
•
High chemical resistance- use with a wide range of liquids
•
Easily calibrated in your lab
•
User-friendly volume selection
•
Wide range of accessories
The dispenser delivers accuracy and long term reproducibility through Solid Calibration®. A series of calibrated permanent fixed stops make volume selection quick and repeatable, not dependent on operator skill. The wetted components are chemically inert with parts made of materials such as platinum-iridium, ceramics, borosilicate glass, and modern fluoropolymers. Our bottle top dispensers work well with acids, bases, and organic solvents. See the chemical resistance chart on page 102.
#ALIBREX©¬DIGITAL¬¬ ¬ • Superior chemical resistance • Long-lasting performance stability • Simple construction – no tool for disassembling • Instant volume setting • In-lab calibration • Autoclavable at 121°C/250°F fully assembled • One year warranty
Friendly digital volume setting
Fast and precise volume adjustment. Efficient click-stop mechanism prevents unwanted alteration. Large display is easy to read; the window adjusts to desired side of instrument body. Optimized working position
The instrument rotates 360° for adequate positioning on top of the bottle. In-lab calibration
Designed for performance handling of liquids from a large variety of bottles and flasks, the Calibrex™ dispensers combine the latest in dosing technology, high-tech materials and ergonomic design. Manufactured and tested to fully comply with current regulations. Three color-coded 520 models with adjustable volumes ranging from 0.25 – 2 mL, 1 – 5 mL and 1 – 10 mL. The Calibrex has a 32 mm screw thread and three adapters are included with the unit (28, 38, and 45 mm) and a 300 mm feed tube. Cat. No.
Color Code
Volume
844000 844002 844004
Green Yellow Blue
0.25 – 2 mL 1 – 5 mL 1 – 10 mL
Division
Inaccuracy (E%) Min. Vol Mid. Vol. Max. Vol.
Imprecision (CV%) Min. Vol Mid. Vol. Max. Vol. Qty/Case
0.05 mL 0.1 mL 0.25 mL
< ± 3.0% < ± 1.8% < ± 0.6% < ± 2.0% < ± 1.3% < ± 0.6% < ± 1.5% < ± 1.1% < ± 0.6%
< 0.5% < 0.35% < 0.1% < 0.5% < 0.35% < 0.1% < 0.5% < 0.35% < 0.1%
Performance values obtained with double distilled water at constant temperature (± 0.5°C) comprised between 20 and 25°C in accordance with EN ISO 8655. Each dispenser has a 32 mm screw thread and included with each unit are three adapters (28, 38, 45 mm) and a 300 mm feed tube.
See page 102 for chemical compatibility chart.
1 1 1
Calibrex™ dispensers are factory calibrated and can be easily recalibrated by means of a dedicated adjustment screw.
Superior Material Selection Parts
Material
Feed Tube Intake Valve Valve Balls Valve Spring Barrel Barrel Plate Plunger Outlet Valve Body Delivery jet assembly
PTFE Ceramic Pyrex® Glass Platinum-iridium Borosilicate Glass PTFE Glass with PFA coating
Ceramic ETFE PTFE/ETFE
Parts coming in contact with the liquid flow are chemically inert.
WHEATON
1.800.225.1437 (U.S. & Canada only) | +1.856.825.1100 | +1.856.825.1368 (F) | www.wheatonsci.com
$ISPENSERS ÂŹBottle Top #ALIBREXŠDIGITALÂŹÂŹ â&#x20AC;˘ â&#x20AC;˘ â&#x20AC;˘ â&#x20AC;˘ â&#x20AC;˘ â&#x20AC;˘ â&#x20AC;˘ â&#x20AC;˘
Superior chemical resistance Long-lasting performance stability Comfortable and convenient in use Solid, yet simple construction Instant volume setting In-lab calibration Autoclavable at 121°C/250°F fully assembled One year warranty
A true digital system
Cylindrical cam with pre-calibrated steps â&#x20AC;&#x201C; one for each volume â&#x20AC;&#x201C; contributes to the long-term calibration stability. In-lab calibration
Three 521 sizes expand the Calibrexâ&#x201E;˘ line with larger dispensing volumes ranging from 2 to 20 mL, 10 to 50 mL and 10 to 100 mL. Similar to the 520 model in many respects, such as construction quality, sturdiness, chemical resistance, smooth plunger travel, in-lab calibration, autoclaving, the 521 model has a distinct black design. Also ďŹ tted with the Solid Calibration adjustment system, the Calibrexâ&#x201E;˘ 521 has an additional ďŹ ne-tuning ring. Each dispenser has a 32 mm screw thread and included with each unit are three adapters (38, 40, 45 mm) and a 300 mm feed tube (375 mm for Cat. No. 844023). Cat. No.
Volume
Division
844021 844022 844023
2 â&#x20AC;&#x201C; 20 mL 10 â&#x20AC;&#x201C; 50 mL 10 â&#x20AC;&#x201C; 100 mL
0.1 1.0 1.0
Min. Vol
Inaccuracy (E%) Mid. Vol. Max. Vol.
< Âą 1.5% < Âą 1.1% < Âą 0.6% < Âą 1.5% < Âą 1.1% < Âą 0.6% < Âą 1.5% < Âą 1.1% < Âą 0.6%
Imprecision (CV%) Min. Vol Mid. Vol. Max. Vol.
Qty/Case
< 0.5% < 0.35% < 0.1% < 0.5% < 0.35% < 0.1% < 0.5% < 0.35% < 0.1%
1 1 1
Performance values obtained with double distilled water at constant temperature (¹ 0.5°C) comprised between 20 and 25°C in accordance with EN ISO 8655. Each dispenser has a 32 mm screw thread and included with each unit are three adapters (38, 40, 45 mm) and a 300 mm feed tube (375 mm for Cat. No. 844023).
See page 102 for chemical compatibility chart.
The Calibrexâ&#x201E;˘ dispensers are factory calibrated. Recalibration easily performed by means of a dedicated adjustment screw.
Superior Material Selection Parts
Material
Feed Tube Intake Valve Valve Balls Valve Spring Barrel Barrel Plate Plunger Outlet Valve Body Delivery jet assembly
PTFE Borosilicate Glass Ceramic, Ruby Platinum-iridium Borosilicate Glass PTFE Glass with PFA coating Ceramic ETFE PTFE/ETFE
Parts coming in contact with the liquid ďŹ&#x201A;ow are chemically inert.
!CUREXŠ COMPACTÂŹÂŹ â&#x20AC;˘ â&#x20AC;˘ â&#x20AC;˘ â&#x20AC;˘ â&#x20AC;˘
Integrated dosing mechanism Simple, robust construction Retractable graduated column reduces instrument height Fluid path materials excluding any metal Choice of reservoir sizes, amber glass and clear borosilicate glass â&#x20AC;˘ Fully autoclavable at 121°C/250°F â&#x20AC;˘ One year warranty
Space saving low proďŹ le
Compact dispensers for safe reagent handling, adapted to refrigerator storage as well as water bath heating. Dosing mechanism entirely protected inside reservoir. Manufactured and tested to fully comply with the latest regulations on instrument safety and precision. Volumes range from 0.2 to 30 mL. The Acurex 501 comes with an amber glass reservoir, and the 502 model comes with a borosilicate glass reservoir. 501 Amber Cat. No.
502 Borosilicate Cat. No.
844060 W844055 W844056 844062 W844057 W844058 844064 W844059 844068
â&#x20AC;&#x201D; W844061 â&#x20AC;&#x201D; W844063 W844065 W844066 â&#x20AC;&#x201D; W844067 â&#x20AC;&#x201D;
Volume
Division
Reservoir Capacity (mL)
0.2 â&#x20AC;&#x201C; 2 mL 0.2 â&#x20AC;&#x201C; 2 mL 0.2 â&#x20AC;&#x201C; 2 mL 0.4 â&#x20AC;&#x201C; 5 mL 0.4 â&#x20AC;&#x201C; 5 mL 0.4 â&#x20AC;&#x201C; 5 mL 1 â&#x20AC;&#x201C; 10 mL 1 â&#x20AC;&#x201C; 10 mL 1 â&#x20AC;&#x201C; 30 mL
0.1 mL 0.1 mL 0.1 mL 0.2 mL 0.2 mL 0.2 mL 0.2 mL 0.2 mL 1.0 mL
250 1000 2000 500 1000 2000 1000 2000 2000
Imprecision (CV%) Min. Vol Mid. Vol. Max. Vol. < 0.5% < 0.5% < 0.5% < 0.5% 1) < 0.5% 1) < 0.5% 1) < 0.5% < 0.5% < 0.5% 2)
< 0.35% < 0.35% < 0.35% < 0.35% < 0.35% < 0.35% < 0.35% < 0.35% < 0.35%
Qty/Case
< 0.1% < 0.1% < 0.1% < 0.1% < 0.1% < 0.1% < 0.1% < 0.1% < 0.1%
1 1 1 1 1 1 1 1 1
The graduated column is retractable for height reduction, making the dispenser ideal for storage in refrigerators. Chemically inert materials
All parts in contact with the liquid are made from chemically inert materials: Parts
Materials
PyrexŽ glass and synthetic ruby Neutral glass PTFE-coated glass Amber glass or Borosilicate glass (resistant > 250°C/482°F) Delivery jet and union PVDF/FEP/PFA Valve Barrel Plunger Reservoir
Performance values obtained with double distilled water at constant temperature (¹ 0.5°C) comprised between 20 and 25°C in accordance with 2) measured at 3 mL EN ISO 8655. 1) measured at 0.5 mL
WHEATON
1.800.225.1437 (U.S. & Canada only) | +1.856.825.1100 | +1.856.825.1368 (F) | www.wheatonsci.com
100
101
$ISPENSERS ¬Bottle Top 2EAGENT¬"OTTLE
!CCESSORIES¬
• Clear bottles are made from borosilicate glass • Amber bottles are square, round or with jug handle • Amber glass bottles are available safety coated • Square polyethylene bottles are available in 250 – 2500 mL size
"OTTLE¬4OP¬$ISPENSER¬¬ !DAPTERS • For the Calibrex 520 and 521 Dispensers • Made from PP (polypropylene) or PTFE
Both the Calibrex 520 and 521 Bottle Top Dispensers come standard with a 32 mm screw thread, and included with each dispenser are three polypropylene bottle neck adapters (28, 40, and 45 mm for the 520 model; and 38, 40, 45 mm for the 521 model). If replacement or different size adapters in different materials are needed they can be purchased separately.
This large selection of reagent bottles is supplied with screw caps and compatible with Socorex Calibrex 520 and 521 Dispensers. The different sized screw thread adapters that correspond to these bottles are supplied with each dispenser. Adapters can also be purchased separately. See the Adapters on this page.
Cat. No.
Cat No.
Screw Thread Size (mm)
Qty/Case
Shape
Volume
Screw Thread Size
Qty/Case
Square Square Square Square Round
100 mL 250 mL 500 mL 1000 mL 2500 mL
32 mm 32 mm 32 mm 45 mm 45 mm
1 1 1 1 1
2500 mL
45 mm
1
1000 mL 2500 mL
45 mm 45 mm
1 1
250 mL 500 mL 1000 mL 2000 mL
45 mm 45 mm 45 mm 45 mm
1 1 1 1
500 mL
32 mm
1
250 mL 500 mL 1000 mL 2500 mL
25 mm 25 mm 32 mm 45 mm
1 1 1 1
Amber Glass
Threaded, PP W830000 W830002 844032 W830004 W830006 W830008 844035 W830010 844038
22 25 28 30 34 36 38 40 45
1 1 1 1 1 1 1 1 1
W832000 844025 844027 844029 844030
36 38 40 45
1 1 1 1
Clear Borosilicate Glass
Threaded, PTFE W830012 W830014 W830016 W830018 Cat. No.
Taper
Qty/Case
19/26 24/29 29/32 45/40
1 1 1 1
19/26 24/29 29/32
1 1 1
Amber Glass, with Handle W832004
Round
Polyethylene Coated Amber Glass W832006 W832008 W832010 W832012 W832014 W832016
Square Round Round Round Round Round
Clear Pyrex® Glass, with Connection Neck
Tapered, PP W830020 W830022 W830024 W830026
Tapered, PTFE W830029 W830031 W830032
844026
Round
Polyethylene Bottle W832018 W832020 W832022 W832024
Square Square Square Square
%XTENSION¬ ¬2EPLACEMENT¬4UBING¬ Autoclavable PTFE delivery Jet-Pen™ and extension tubing help dispense into vessels with maximum comfort within a 60 cm distance. Fits Calibrex™ 520/521 dispensers up to 20 mL. Replacement Feed Tubing
Each Calibrex™ digital dispenser is supplied with one PTFE feed tubing. Spare feed tubings are available to a standard size. Uncut by the meter is available by request. The latter is recommended when aspirating from remote bulk containers. Cat. No
Description
Length
Inside Dia.
Extension Tubing 844024
Extension tubing for dispensers up to 20 mL
600 mm
2.2 mm
300 mm 300 mm 300 mm 375 mm
5 mm 7.5 mm 10 mm 10 mm
Replacement Feed Tubing I051154 I050916 I050917 I050349
Replacement feed tubing, 520, 2, 5, 10 mL Replacement feed tubing, 521, 20 mL Replacement feed tubing, 521, 50 mL Replacement feed tubing, 521, 100 mL
WHEATON
$ISPENSER¬3TAND • Stabilizes dispenser creating a safe environment • Facilitates liquid intake from a remote container
The Dispenser Stand holds dispensers up to 50 mL when screwed on small size bottles. For bulk container aspiration, the Stand facilitates remote liquid intake dispensing up to 50 mL or 100 mL (< 10 m distance, < 2 m elevation). The dispenser and feed tube can be ordered separately. Cat. No.
Description
W832026 W832028 W832030
Stand for dispensers up to 50 mL Stand for remote liquid intake, dispensers up to 50 mL* Stand for remote liquid intake, dispensers 100 mL*
* Dispenser and feed tube not included, to be ordered separately
1.800.225.1437 (U.S. & Canada only) | +1.856.825.1100 | +1.856.825.1368 (F) | www.wheatonsci.com
Qty/Pk
1 1 1
$ISPENSERS ¬Bottle Top
%ASY¬MAINTENANCE Disassembling/reassembling is facilitated by the limited number of well connected parts - no tools needed.
$ISPENSER¬#HEMICAL¬2ESISTANCE¬ The following list includes most currently used chemicals. It provides useful information for the safe and adequate use of Acurex™ 501 and Calibrex™ 520/521 dispensers. However, safety precautions and recommendations in operating instructions must be followed carefully. Reagents
Acura 501
Calibrex 520 521
Reagents
Acura 501
Calibrex 520 521
Reagents
Acura 501
Calibrex 520 521
Acetic acid 100% Acetic acid diluted Acetone Acetonitrile Ascorbic acid Benzaldehyde Benzene Boric acid Bromine Butanol Butanone Carbon disulfide Chloroform Chloronitric acid 100% Chlorosulfuric acid 100% Chromic acid 100% Citric acid Cyclohexane Cyclohexanone Diethylene glycol Diethylether Dimethylformamide (DMF) Dimethylsulfoxide (DMSO) Dioxane / Diethylene dioxide
A A A A A A A A B/2 A A A A B/2/3 B/2/3 B/2/3 A A A A A A A A
A A B/4 A A A B/4 A B/2 A B/4 A B/4 B/3 B/3 B/3 A A A A A B/4 A A
Ethanol Ether Ethyl acetate Ethylene glycol Formaldehyde (Formalin) Formic acid Gasoline Glycerin < 40% Hexane Hydrochloric acid 100% Hydrofluoric acid 100% (HF) Hydrogen peroxide Iodine Isopropanol Lactic acid Liquid ammonia Methanol Methyl ethyl ketone (MEK) Methylmethacrylate (MMA) Mineral oil Nitric acid 100% Nitric acid dil. < 30% Oxalic acid Perchloric acid 100%
A A A A A A A A A B/2/3 C/5 A A A A A A A A A B/2/3 A A B/2/3
A B/4 A A A A A A A A C/5 A A A A A A B/4 A A B/3 A A B/3
Perchloric acid diluted Petrol benzene Petroleum ether Phenol Phosphoric acid 100% Potassium hydroxide Potassium permanganate Propronic acid Sodium chloride / cooking salt Sodium hydroxide Sodium hypochloride Sulfochromic acid 100% Sulfonitric acid 100% Sulfuric acid 100% Tetrahydrofuran (THF) Toluene Trichlorethylene Trichloroacetic acid Trichloroethane/methane Trichlortrifluoroethane Veg. / anim. / min. oil Xylene
A A A A A B/1 A A B/1 B/1 A B/2/3 B/2/3 B/2/3 B/2/4 A B/4 A B/4 B/4 A A
A A A B/4 A B/4 A A A A B/1 B/1 A A A A A A B/1 B/1 A A B/2/3 B/2/3 B/2/3 B/2/3 B/2 B/2 B/4/2 B/2/4 B/4 B/4 B/4 B/4 A A B/4 B/4 B/4 B/4 A A B/4 B/4
A = Good resistance B = Acceptable with limitations C = Not recommended
B/1 B/3 A A A A B/4 A C/2/4 A A A B/4 C/3 B/3 B/3 A A A A A A A B/4
A B/4 B/4 A A A A A A B/3 C/5 A A A A A A A A A C/3 A A B/3
1 = Possible crystallization – blockage (do not let dry plunger/barrel together). 2 = Swell of plunger protection layer, possible peeling. 3 = Acid vapors (better resistance with lower concentration). Do not leave instrument on bottle. 4 = Risk of softening or discoloration of external parts through vapors. Do not leave instrument on bottle. 5 = Chemical degradation of glass parts (plunger/barrel).
For automatic dispensing, see the Wheaton Omnispense Plus® peristaltic pump that can operate as a constant rate flow pump or as a programmed dose dispenser. For more details see page 126.
WHEATON
1.800.225.1437 (U.S. & Canada only) | +1.856.825.1100 | +1.856.825.1368 (F) | www.wheatonsci.com
102
103
$ISPENSERS ÂŹSelf-ReďŹ lling Syringe
Simple, natural movements
Both pistol-grip and two-ring handles ďŹ t any hand in a comfortable way. Activation performed with limited effort for efďŹ cient work even during long dispensing series.
Volume selection â&#x20AC;&#x201C; Reliable reproducibility Š
$OSYS ÂŹSYRINGESÂŹ â&#x20AC;˘ â&#x20AC;˘ â&#x20AC;˘ â&#x20AC;˘ â&#x20AC;˘ â&#x20AC;˘ â&#x20AC;˘
Optimal hand balance and ergonomics Fast and reliable volume setting Excellent reproducibility Plunger tightness without O-ring High chemical resistance Fully autoclavable at 121°C/250°F One year warranty
From the basic unit to the corrosion-resistant model, the laboratory dedicated syringe line offers precision instruments you can trust. Intended for safe and reliable liquid distribution, the selection of pistol-grip and two-ring instruments comes in a wide volume range.
Volume is set within seconds. It will not vary while activating the syringe, thanks to the safety-locking nut on the micrometric screw. Dose-by-dose reproducibility (CV) is excellent, as witnessed by performance ďŹ gures. Plunger tightness without O-ring
Smooth plunger travel and tightness achieved through high-precision stainless steel plunger and grounded glass barrel. No O-ring to mess with or replace.
$OSYSŠBASICÂŹSYRINGESÂŹ â&#x20AC;˘ â&#x20AC;˘ â&#x20AC;˘ â&#x20AC;˘
Fill-by-ďŹ ll (automatic) through needle or cannula Supplied without valve system Luer Lock nozzle Two-ring and pistol-grip handle
Package includes syringe, PVC protection sleeve and operating instructions.
ÂŹ $OSYSŠCLASSICÂŹSYRINGESÂŹ â&#x20AC;˘ â&#x20AC;˘ â&#x20AC;˘ â&#x20AC;˘
Self-reďŹ lling automatic Integrated valve system Luer Lock nozzle Two-ring and pistol-grip handle
Package includes syringe, one meter silicone feed tube, sinker, PVC protection sleeve, aspiration and vent cannulas, set of spare for valve, operating instructions.
ÂŹ $OSYSŠPREMIUMÂŹSYRINGESÂŹÂŹ â&#x20AC;˘ â&#x20AC;˘ â&#x20AC;˘ â&#x20AC;˘ â&#x20AC;˘
Self-reďŹ lling automatic Detachable valve system Enhanced corrosion resistance Luer Lock nozzle Two-ring and pistol grip handle
Package includes syringe, one meter silicone feed tube, sinker, PVC protection sleeve, aspiration, vent and dosing cannulas, set of spare for valve, operating instructions.
WHEATON
1.800.225.1437 (U.S. & Canada only) | +1.856.825.1100 | +1.856.825.1368 (F) | www.wheatonsci.com
$ISPENSERS ¬Self-Refilling Syringe ,IQUID¬0ATH¬-ATERIALS¬(for Chemical Resistance) Parts
Basic/classic models
Premium models
Feed tubing Barrel Washer, Barrel Plunger Valve system Washer, valve Spring and balls, valve Sinker, feed cannula
Silicone Borosilicate glass FPM Stainless steel DIN 304 Ni-Cr Brass PTFE Stainless steel, DIN 304 Ni-Cr Brass
Silicone Borosilicate glass FPM Stainless steel DIN 316L Stainless steel DIN 316L PTFE Stainless steel, DIN 304 Ni-Cr Brass
Cat. No.
Volume (mL)
Divisions (mL)
Min.Vol.
Imprecision (CV%) Mid.Vol. Max.Vol.
$OSYS©¬LABORATORY¬SYRINGES¬n¬¬ 5NLIMITED¬APPLICATIONS
Qty/Case
Dose-by-dose distribution
Dosys basic syringe 162 with Two-ring Handle W852000 W852002 W852004
0.1 – 1 0.3 – 2 0.5 – 5
0.05 0.1 0.5
< 0.7% < 0.6% < 0.5%
< 0.6% < 0.5% < 0.4%
< 0.4% < 0.4% < 0.2%
1 1 1
< 1.8% 1) < 1.2% < 0.7% < 0.6%
< 1.2% < 1.9% < 0.6% < 0.5%
< 0.5% < 0.4% < 0.4% < 0.4%
1 1 1 1
< 0.7 1) < 0.6% < 0.5% < 0.5%
< 0.6% < 0.5% < 0.4% < 0.4%
< 0.4% < 0.4% < 0.2% < 0.2%
1 1 1 1
< 0.7% < 0.6% < 0.5% < 0.5%
< 0.6% < 0.5% < 0.4% < 0.4%
< 0.4% < 0.4% < 0.2% < 0.2%
1 1 1 1
< 1.8% 1) < 1.2% < 0.7% < 0.6% < 0.5% < 0.5% < 0.5%
< 1.2% < 1.9% < 0.6% < 0.5% < 0.4% < 0.4% < 0.4%
< 0.5% < 0.4% < 0.4% < 0.4% < 0.2% < 0.2% < 0.4%
1 1 1 1 1 1 1
< 0.7% < 0.6% < 0.5% < 0.5%
< 0.6% < 0.5% < 0.4% < 0.4%
< 0.4% < 0.4% < 0.2% < 0.2%
1 1 1 1
Dosys classic syringe 163 with Two-ring Handle W852006 W852008 W852010 W852012
0.025 – 0.3 0.1 – 0.5 0.1 – 1 0.3 – 2
0.025 0.1 0.05 0.1
Dosys premium syringe 164 with Two-ring Handle W852014 W852016 W852018 W852020
0.1 – 1 0.3 – 2 0.5 – 5 1 – 10
0.05 0.1 0.5 1.0
Dispensing distribution
Dosys basic syringe 172 with Pistol-grip Handle W853000 W853002 W853004 W853006
0.1 – 1 0.3 – 2 0.5 – 5 1 – 10
0.05 0.1 0.5 1.0
Dosys classic syringe 173 with Pistol-grip Handle W853008 W853010 W853012 W853014 W853016 W853018 W853020
0.025 – 0.3 0.1 – 0.5 0.1 – 1 0.3 – 2 0.5 – 5 1 – 10 5 – 20
0.025 0.1 0.05 0.1 0.5 1.0 1.0
Sterile work
Dosys premium syringe 174 with Pistol-grip Handle 851371 851372 851373 851375
0.1 – 1 0.3 – 2 0.5 – 5 1 – 10
0.05 0.1 0.05 1.0
Tests performed with double distilled water, using stainless steel cannula (1.2 x 50 mm) at constant working speed.
1)
measured at 0.075 mL
Filtration at your nozzle tip
Aspiration with reverse modus valve
Few parts assembly – Low maintenance
Syringe stand
The automatic syringes are made of only six main parts, easy to disassemble. Fast access to all elements allows rapid and efficient cleaning. Spares are available at reasonable cost.
Stand holds syringe in ready-to-use position. Easy-to-clean material. Autoclavable.
WHEATON
Cat. No.
Description
W855008
Syringe Stand
Qty/Case
1
Animal injection
1.800.225.1437 (U.S. & Canada only) | +1.856.825.1100 | +1.856.825.1368 (F) | www.wheatonsci.com
104
105
$ISPENSERS ¬Self-Refilling Syringe
!CCESSORIES¬FOR¬3ELF 2ElLLING¬3YRINGES¬ !LTERNATIVE¬&EED¬3OURCES Optional vial holder conversion set & reagent reservoirs for additional liquid feeding possibilities.
)NJECTION¬.EEDLES Cat. No.
Description
W860068
Vial holder conversion set for 163 & 173 models (except 20 mL) without vial Polypropylene bottle, 60 mL Polypropylene bottle, 125 mL Polypropylene bottle, 250 mL
W860086 W860088 W860090
Qty/Pk
1 1 1 1
!SPIRATION¬6ALVE Reverse modus valve set for liquid aspiration (ex. waste collection in separate container). Vented waste collector cap and enhanced tightness set recommended.
Cat. No.
Description
W860078 W860080
Reverse modus aspiration valve unit for 164/174 models Screw cap inside diameter 45 mm, with tubing connection and filtered air outlet
Qty/Pk
1 1
#LEANING¬"RUSHES Heavy-duty nylon brushes with tufted end and plastic handle for barrel cleaning.
Beveled, high-quality needles, stainless steel, autoclavable. Cat. No.
W860000 W860001 W860002 W860003 W860004 W860005 W860006 W860007 W860008 W860009 W860010 W860011 W860012 W860013 W860014 W860015 W860016 W860017 W860018 W860019 W860020 W860021 W860022
ID x L (mm)
0.6 x 4 0.6 x 5 0.6 x 8 0.6 x 13 0.7 x 4 0.7 x 6 0.7 x 7 0.7 x 10 0.7 x 13 0.8 x 10 0.8 x 20 0.8 x 30 0.8 x 40 0.9 x 7 0.9 x 10 0.9 x 13 1.0 x 10 1.0 x 13 1.0 x 15 1.0 x 20 1.0 x 30 1.2 x 10 1.2 x 15
Qty/Pk
12 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12
Cat. No.
ID x L (mm)
Qty/Pk
W860023 W860024 W860025 W860026 W860027 W860028 W860029 W860030 W860031 W860032 W860033 W860034 W860035 W860036 W860037 W860038 W860039 W860040 W860041 W860042 W860043 W860044
1.2 x 20 1.2 x 35 1.2 x 50 1.4 x 10 1.4 x 20 1.4 x 35 1.6 x 10 1.6 x 20 1.6 x 25 1.6 x 30 1.6 x 100 1.8 x 10 1.8 x 20 1.8 x 30 2.0 x 30 2.0 x 40 2.0 x 50 1.2 x 10 1.6 x 20 2.0 x 30 2.0 x 40 2.0 x 50
12 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12
-ICROTEST¬-ANIFOLDS Cat. No.
Description
W855000 W855002 W855004 W855006
For 0.3, 0.5, 1 mL barrels For 1, 2, 5 mL barrels For 5, 10, 20 mL barrels Set of 6 nylon brushes, 2 each
6 6 3 6
$RENCHERS For safe animal mouth and nose feeding. Stainless steel, autoclavable. Cat. No.
Inside Diameter x L
Qty/Pk
Drenchers, straight W855010 W855012 W855014 W855016
0.9 x 25 mm 1.2 x 51 mm 1.6 x 102 mm 3.0 x 203 mm
3 3 2 2
0.9 x 25 mm 1.2 x 51 mm 1.6 x 102 mm 3.0 x 203 mm
3 3 2 2
Cat. No.
Description
851380 851381 851382 851383 851388 851389
4 Position, Straight, 24 well 8 Position, Straight, 96 well 4 Position, Angular, 24 well 8 Position, Angular, 96 well 12 Position, Straight, 96 well 12 Position, Angular, 96 well
Center to Center (mm)
20 9 20 9 9 9
Qty/Cs
1 1 1 6 1 1
$ISPENSING¬#ANNULAS
Drenchers, bent W855018 W855020 W855022 W855024
Ideal for use with 24 or 96 well microplates, the stainless steel manifolds are available in both a straight "T" style and an angular style with an offset hub. This unique dispensing system enables you to perform sample in oculations, cell feedings, and washing faster and more efficiently under sterile conditions.
Qty/Pk
Blunt end superior cannulas, stainless steel, autoclavable. Cat. No.
Description
851411
Dispensing Cannula with Luer Lock 18 gauge x 2” for 1 mL and 2 mL Syringes Dispensing Cannula with Luer Lock 14 gauge x 4” for 5, 10 and 20 mL Syringes
851412
%NHANCED¬4IGHTNESS¬3ET The special clear glass barrel/O-ring fitted plunger enhance tightness when demanded by application (ex. filtration, aspiration, etc.). For 5 mL syringe only.
Qty/Pk
1 1
3PARE¬0ARTS¬FOR¬3ELF 2ElLLING¬3YRINGES¬ &EED¬4UBING (medical quality silicone)
Cat. No.
Description
W860072 W860074
Set includes one each plunger, O-ring, 5 mL barrel and grease Spare barrel for tightness set, 5 mL
WHEATON
Qty/Pk
Cat. No.
Description
1 6
851419 851424
Tube, syringes 0.3 - 10 mL, cut Tube, syringe 20 mL, cut
1.800.225.1437 (U.S. & Canada only) | +1.856.825.1100 | +1.856.825.1368 (F) | www.wheatonsci.com
Qty/Pk
1m 1m
%NVIRONMENTAL¬4ESTING !LL 'LASS¬3YRINGES¬WITH¬,UER¬,OCK¬.OZZLE Cat. No.
Description
W851008 W851010 W851011 W851012 W851014 W851016
Glass Syringe, 0.1 – 1 mL Glass Syringe, 0.5 – 2 mL Glass Syringe, 0.2 – 5 mL Glass Syringe, 1 – 10 mL Glass Syringe, 1 – 20 mL Glass Syringe, 1 – 50 mL
Qty/Pk
3 3 3 3 2 1
%NVIRONMENTAL¬4ESTING Wheaton has many products for environmental testing and for sample and liquid handling. Refer to the sections below when searching for these specific items. • BOD Bottles page 3
'ROUNDED¬'LASS¬"ARRELS Cat. No.
Description
W860048 W860049 851391 851392 851393 851395 W860051
Barrel, syringe, 0.3 mL Barrel, syringe, 0.5 mL Barrel, syringe, 1 mL Barrel, syringe, 2 mL Barrel, syringe, 5 mL Barrel, syringe, 10 mL Barrel, syringe, 20 mL
Qty/Pk
6 6 6 6 6 6 6
• Bottles for Sample Collection page 7 - 28 • Bottle Top Dispensers pages 99-100 • Chemistry Glassware pages 67-80 • Coliwasas & Other Sample Collection Devices page 129 • EPA Vials & Other Vials for Sample Collection
2EPLACEMENT¬0ISTONS
pages 142-152
Cat. No.
Description
Qty/Pk
851401 851402 851403 851405
Piston, 1 mL Premium Syringe Piston, 2 mL Premium Syringe Piston, 5 mL Premium Syringe Piston, 10 mL Premium Syringe
1 1 1 1
• Imhoff Cone for Solid Determination page 82 • Pipettors with volumes up to 10 mL pages 111-116
06#¬0ROTECTION¬3LEEVES Cat. No.
Description
W860052 W860054 W860056 W860058 W860060 W860062
Sleeve, 0.3, 0.5 mL barrels Sleeve, 1 mL barrels Sleeve, 2 mL barrels Sleeve, 5 mL barrels Sleeve, 10 mL barrels Sleeve, 20 mL barrels
Qty/Pk
6 6 6 6 6 3
• Safety Coated Bottles pages 16 - 17 • TCLP Extraction Bottles page 5
6ALVE¬!SSEMBLY¬0ARTS¬+ITS Cat. No.
Description
W860064 W860066 W851425 W851426 W851427 W851428 W851429 851430 851431
Kit for valve, syringe 0.3 mL Kit for valve, syringe 0.5 mL Kit for valve, syringe 1 mL Kit for valve, syringe 2 mL Kit for valve, syringe 5 mL Kit for valve, syringe 10 mL Kit for valve, syringe 20 mL Luer Lock Valve Assembly with three way valve for 1, 2, 5 & 10 mL syringes Luer Lock Valve Assembly with three way valve for 20 mL syringe
Qty/Pk
1 1 1 1 1 1 1 1 1
Kit includes 1 spring, 2 balls, 2 washers for valve, and barrel washer.
6ENT¬AND¬&EED¬#ANNULAS Cat. No.
Description
851414 851421 851415 851422
Short vent cannula, chrome plated, for 10 mL syringe Short vent cannula, chrome plated, for 20 mL syringe Long feed cannula, chrome plated, for 0.3 to 10 mL syringes Long feed cannula, chrome plated, for 20 mL syringe
Qty/Pk
WHEATON
1 1 1 1
1.800.225.1437 (U.S. & Canada only) | +1.856.825.1100 | +1.856.825.1368 (F) | www.wheatonsci.com
106
107
,YOPHILIZATION This section of the catalog includes most products used in freeze drying applications. Although these products appear in other sections of the catalog, we hope you find it convenient to have the products commonly used in the Lyophilization process located in one section of the catalog.
Components
L
yophilization, also known as “freeze drying”, is the process of removing all liquid (water in most cases) from a sample to prolong the shelf life of the product. Long term storage stability of biological materials has made this a preferred technique at biochemical/biotech and pharmaceutical companies and at universities and medical schools for samples such as blood plasma, vaccine, serum, tissue samples, enzymes, and microbial cultures. The food/beverage industry also uses this technique.
Stoppered for Lyo
Stoppered
Crimp Sealed
T
he primary containers used for lyophilization tray drying are serum bottles, serum vials, and to a much lesser extent ampules. The prime accessory is the 2 or 3 leg stopper (1) which has been designed to sit on the top of the container during the lyophilization process (2), and is inserted (3) during the stoppering step in the process. The closure (aluminum seal or threaded cap) is then applied (4). The split stopper is utilized when the dried product is sensitive to air or moisture and needs a rapid seal. Not all freeze dried materials are this sensitive or will require use with the split stopper. Wheaton can provide all the above mentioned product as well as crimpers to give your containers a secure seal.
6ACULE ¬,YOPHILIZATION¬¬ !MPULE ¬0RE 3CORED
!MPULES
• Ideal for freeze drying • Pre-scored to eliminate filing • Heat sealable only
6ACULE ¬,YOPHILIZATION¬!MPULE¬¬¬¬ • Ideal for small volume lyophilization samples • Heat or stopper sealable
This small volume lyophilization ampule can be flame-sealed or stored with a stopper in place. They are manufactured from Wheaton 33 low extractable borosilicate glass that conforms to USP Type I and ASTM Type I, Class A requirements. Stoppers can be purchased separately.
Cat. No.
Description
651446 W651450
2 mL Vacule 11 mm Stopper
Dia x H (mm)
*OD at Top (mm)
12 x 86 —
10 —
Qty/Case
144 144
* Approximate OD
!MPULE¬3EALING¬-ETHODS Standard Ampules Tip Seal Method: While holding the ampule body, insert the tip of the ampule stem into the sealing flame. Heat the tip approximately 3-4 mm from the top. Gently rotate the ampule while heating the tip until the melted glass fuses into a smooth dome.
These ampules are designed for freeze drying, protein hydrolysis, and microdetermination of ketones and amino acids. The long stem provides a convenient means for heat sealing under vacuum. The pre-scored feature allows for easy opening. They are manufactured from Wheaton 33 low extractable borosilicate glass that conforms to USP Type I and ASTM Type I, Class A requirements. Cat. No.
Size (mL)
Dia x H (mm)
*OD at Top (mm)
651502 651506 651509 651510
1 2 5 10
10 x 108 11.8 x 122 16.5 x 133 19.5 x 154
10 11.75 9 10
* Approximate OD
For additional information on ampules see pages 1-2.
Funnel-Top Ampules Pull Seal Method: In addition to easier filling, the funnel-top ampule is easier to seal using the Pull Seal method. Hold the funnel top with one hand and the body of the ampule with the other hand. Insert the center of the ampule stem into the sealing flame. As the glass softens, rotate the ampule while pulling the funnel top off. This will require very little force and will allow the glass to seal itself. This method can be used for all ampule configurations.
WHEATON
Crimp or decap your aluminum seals with the Wheaton E-Z Crimper™ and the E-Z Decapper™. See pages 35-36 for more details.
1.800.225.1437 (U.S. & Canada only) | +1.856.825.1100 | +1.856.825.1368 (F) | www.wheatonsci.com
Qty/Case
144 144 144 144
,YOPHILIZATION "OTTLES
108
3CREW¬#APS¬FOR¬¬ 3CREW¬.ECK¬$IAGNOSTIC¬"OTTLES • • • •
Polypropylene screw caps in 5 colors Use with 224100-203 thin-flange stopper Screw cap size 20-400 Autoclavable
Solid Top Screw Cap
Use these unlined polypropylene caps with screw neck diagnostic bottles. These solid and open top caps come in five colors and can be used with thin flange lyophilization stoppers. Screw cap thread size 20-400. Cat. No.
Open Top Screw Cap
Color
Qty/Case
Black White Red Blue Yellow
300 300 300 300 300
Black White Red Blue Yellow
300 300 300 300 300
Solid Top Screw Caps
3CREW¬.ECK¬$IAGNOSTIC¬"OTTLE¬ • • • • •
240706-01 240706-02 240706-03 240706-04 240706-05
Alternative to serum bottles and vials Can be used for lyophilization Fits with I-Loc™ closure or screw cap with stopper Superior chemical resistance Autoclavable
Open Top Screw Caps
Screw Neck diagnostic bottles are an alternative to serum bottles and vials. Each bottle has a controlled ID which allows for fit with the I-Loc™ closure or with a 20-400 screw cap with thin flange stopper. The product is made from Wheaton 400 borosilicate glass that conforms to USP Type I requirements. Cat. No.
Capacity (mL)
Dia x H (mm)
Cap Size
Qty/Case
5 10 20 50
21 x 48 25 x 61 32 x 66 42 x 80
20-400 20-400 20-400 20-400
480 480 480 288
5 10 20 50
21 x 48 25 x 61 32 x 66 42 x 80
20-400 20-400 20-400 20-400
480 480 480 288
240716-01 240716-02 240716-03 240716-04 240716-05
Clear 219360 219361 219362 219364
Amber 219370 219371 219372 219374
3TOPPER ¬4HIN¬&LANGE¬ • Use with screw caps for Screw Neck Diagnostic Bottles • Gray chlorobutyl/55 3-leg lyophilization stopper • Autoclavable
Use this gray chlorobutyl/55 three-leg lyophilization stopper with Wheaton screw neck diagnostic bottles, in conjunction with open top caps (240716-01 series) or solid top caps (240706-01 series). Cat. No.
Stopper Size
224100-203
Qty/Case
20 mm
300
,AB¬ ©¬'RADUATED¬"OTTLES Wheaton Lab 45 Media Bottles are ideal for freeze drying when used with 224100-503 or 224100-507 slotted stoppers and 240736 or 240746 screw caps. Lab 45s are manufactured from borosilicate glass and have a 45 mm screw thread finish, a writing area, and approximate volume graduations.
) ,OC©¬#LOSURE¬ • • • •
For use with Screw Neck Diagnostic Bottles Advantages of an aluminum seal with the convenience of a screw cap Polypropylene screw cap with gray bromobutyl/50 stoppers Autoclavable
These closures are specifically designed for diagnostic applications and offer all the advantages of an aluminum seal and stopper with the convenience of a screw cap. The unique combination of a stopper and screw cap ensures excellent sealing characteristics making them ideal for liquid reagents. The contents can be accessed using a syringe through the stopper or with a pipette after removing the screw cap. These polypropylene closures are available in black, white, red, blue and yellow. Tolerances in the stoppers are maintained to +/-.010. Cat. No.
Color
Cap Size
Qty/Case
240676-01 240676-02 240676-03 240676-04 240676-05
Black White Red Blue Yellow
20-400 20-400 20-400 20-400 20-400
100 100 100 100 100
WHEATON
The wide 45 mm finish facilitates filling and retrieving contents. Sloping shoulders allow for easy cleaning and complete drainage; the polypropylene pour ring eliminates drips. The bottles, caps, and pour rings are autoclavable. Cat. No.
Description
Size (mm)
Qty/Case
Bottle without Cap or Pour Ring 219915
Media Bottle, 100 mL, 56 x 103 mm (Dia x H)
45
12
Screw Cap, White PP, without Sealing Ring Screw Cap, White PP, with Center Hole Pour Ring, Polypropylene Pour Ring, Red ETFE Black Lyophilization Stopper, Halobutyl/60 Black Lyophilization Stopper, EPDM
45 45 45 45 43 43
12 12 12 10 12 12
Accessories 240736 240746 240756 240760 224100-503 224100-507
1.800.225.1437 (U.S. & Canada only) | +1.856.825.1100 | +1.856.825.1368 (F) | www.wheatonsci.com
109
,YOPHILIZATION 3ERUM¬"OTTLE
#LOSURES
• Fits most lyophilization applications • Borosilicate glass conforms to USP Type I requirements • Shrink-wrapped partitioned modules reduce breakage
Serum bottles are ideal for long and short term sample storage, lyophilization and vaccine/injectable drug containers. These molded bottles have excellent wall strength and chemical tolerances, which are important for storage applications. Bottles are manufactured from Wheaton 400 borosilicate molded glass that conforms to USP Type I requirements. Bottles are packaged in shrink-wrapped partitioned modules with the exception of 2 mL size, which has no partition. Cat. No.
Size (mL)
Mouth ID x OD (mm)
Dia x H (mm)
Fits Rack
Qty/Case
7 x 13 13 x 20 13 x 20 13 x 20 13 x 20 13 x 20 13 x 20 13 x 20 13 x 20
17.5 x 35 23 x 47 25 x 54 32 x 58 37 x 63 43 x 73 41 x 91 52 x 95 54 x 107
868805 868805 868806 868615 868615 868615 868615 868617 —
288 288 288 288 288 288 144 144 144
13 x 20 13 x 20 13 x 20 13 x 20 13 x 20 13 x 20
23 x 47 25 x 54 32 x 58 37 x 63 43 x 73 52 x 95
868805 868806 868615 868615 868615 868617
288 288 288 288 288 144
Open Top Unlined Seal
Center Disc Tear-Out Seal
Clear Serum Bottles 223712 223738 223739 223742 223743 223745 223746 223747 223748
2 5 10 20 30 50 60 100 125
Amber Serum Bottles 223760 223761 223762 223763 223764 223766
5 10 20 30 50 100
Note: Select aluminum seal and stopper size by using the mouth OD dimension of the bottle or vial.
Solid Top Unlined Seal
Tear Off Unlined Seal
5NLINED¬!LUMINUM¬3EALS We offer unlined aluminum seals in a wide range of styles and sizes in natural, blue, red and green aluminum. Cat. No.
Color
For Mouth OD (mm)
Shelf Pack
Qty/Case
Open Top Unlined Aluminum Seals 224175-01 224175-05 224175-06 224175-07 224176-01 224176-05 224176-06 224176-07 224177-01 224177-05 224177-06 224178-01 224178-05 224178-06 224178-07
Natural Blue Red Green Natural Blue Red Green Natural Blue Red Natural Blue Red Green
8 8 8 8 11 11 11 11 13 13 13 20 20 20 20
100 100 100 100 100 100 100 100 100 100 100 100 100 100 100
1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000
Center Disc Tear-Out Unlined Aluminum Seals The center disc tears out, exposing the top of the stopper to the syringe.
3ERUM¬4UBING¬6IAL¬ • Made from low extractable borosilicate glass • Special design adds strength for freeze drying applications • Shrink-wrapped modules reduce particulate contamination
The blowback feature in the neck and specially designed bottom radius for added strength are important for lyophilization applications. The clear vials are manufactured from low extractable borosilicate glass that conforms to ASTM Type I, Class A and USP Type I requirements, and the amber vials are manufactured from low extractable borosilicate glass that conforms to USP Type I requirements. Vials are packaged in shrink-wrapped modules to greatly reduce particulate contamination. Cat. No.
Size (mL)
Mouth ID x OD (mm)
Dia x H (mm)
Fits Rack
Qty/Case
7 x 13 7 x 13 13 x 20 13 x 20 13 x 20
15 x 32 17 x 38 22 x 40 24 x 50 30.5 x 58
868804 868810 868805 — —
144 144 144 144 120
7 x 13 13 x 20 13 x 20
15 x 32 22 x 40 24 x 50
868804 868805 —
144 144 144
Clear Tubing Vials 223683 223684 223685 223686 223687
2 3 5 10 20
Amber Tubing Vials 223693 223695 223696
2 5 10
WHEATON
224182-01 224182-05 224182-06 224182-07 224183-01 224183-05 224183-06 224183-07
Natural Blue Red Green Natural Blue Red Green
13 13 13 13 20 20 20 20
100 100 100 100 100 100 100 100
1000 1000 1000 1000 1000 1000 1000 1000
Solid Top Unlined Aluminum Seals These seals are excellent for long-term storage of samples. 224189 224191
Natural Natural
11 20
100 100
1000 1000
Tear-Off Unlined Aluminum Seals This seal can be completely removed and the contents readily poured from bottle. 224192-01 224192-05 224192-06 224192-07 224193-01 224193-05 224193-06 224193-07
Natural Blue Red Green Natural Blue Red Green
13 13 13 13 20 20 20 20
1.800.225.1437 (U.S. & Canada only) | +1.856.825.1100 | +1.856.825.1368 (F) | www.wheatonsci.com
100 100 100 100 100 100 100 100
1000 1000 1000 1000 1000 1000 1000 1000
,YOPHILIZATION
110
3TOPPERS
7HEATON¬0REMIUM¬3TOPPERS
3-Leg Straight Plug
New
3-Leg Lyophilization Stopper
2-Leg Lyophilization Stoppers
2-Leg Igloo
Wheaton’s premium stopper selection adds confidence with purity. There are three new styles to choose from. Two of the styles feature a new rubber formulation that redefines rubber purity. The third style is a stopper that is completely coated with a fluorinated polymer coating. This coating gives the stopper a chemical resistance similar to the chemical resistance of PTFE. As a result, this coating ensures sample purity. These stoppers are a good choice if you are using harsh chemicals that require high levels of purity.
5LTRA¬0URE¬3TOPPER Straight Plug Stopper Wheaton’s new Ultra Pure straight plug stoppers are made from a bromobutyl rubber compound containing the highest level of chemical purity. These stoppers are WFI compatible. They also have an ultra low level of extractables and they remain stable when exposed to gamma irradiation making them very well suited for Ready-for-Sterilization and Ready-for-Use applications. Lyophilization Stopper Wheaton’s new Ultra Pure lyophilization stoppers are made from a bromobutyl rubber compound containing the highest level of chemical purity. These stoppers demonstrate a very low level of moisture absorption and a low level of extractables. They are compatible with Water for Injection (WFI) applications and are not suitable for packaging applications. They are free from natural rubber or natural rubber latex. They are ideal for use in most lyophilization applications. Cat. No.
W224100-400 W224100-401 W224100-402 W224100-405 W224100-406 W224100-407 W224100-408
For Mouth ID x OD (mm)
Stopper Style
Stopper Material
7 x 13 7 x 13 7 x 13 13 x 20 13 x 20 13 x 20 13 x 20
Straight Plug 2-Leg Stopper Igloo Stopper Straight Plug 2-Leg Stopper 3-Leg Stopper Igloo Stopper
Gray Bromobutyl/47 Gray Bromobutyl/46 Gray Bromobutyl/46 Gray Bromobutyl/46 Gray Bromobutyl/46 Gray Bromobutyl/46 Gray Bromobutyl/46
Shelf Pack Qty/Case
100 100 100 100 100 100 100
1000 1000 1000 1000 1000 1000 1000
For Mouth ID x OD (mm)
Cat. No.
Stopper Material
Shelf Pack
Qty/Case
2-Leg Lyophilization Stoppers This all-purpose design reduces the possibility of legs sticking to each other. 224100-092 224100-093 224100-192 W224100-193 224100-194 224100-282 224100-503 224100-507
7 x 13 7 x 13 13 x 20 13 x 20 13 x 20 20 x 28 31 x 43 31 x 43
Gray Chlorobutyl-Isoprene blend/50 Gray Chlorobutyl/50 Gray Chlorobutyl-Isoprene blend/50 Gray Chlorobutyl/46 Gray Chlorobutyl/50 Gray Chlorobutyl/50 Black Halobutyl/60 Black EPDM
100 100 100 100 100 100 — —
1000 1000 1000 1000 1000 1000 12 12
3-Leg Lyophilization Stoppers The 3-leg design provides stability during lyophilization and resists cocking. 224100-202
13 x 20
Gray Chlorobutyl/50
100
1000
3-Leg Thin Flange Lyophilization Stopper Can be used with open top caps (240716-01 series) or solid top caps (240706-01 series). 224100-203
13 x 20
Gray Chlorobutyl/55
—
300
6IALS
6ACULE ¬¬6IAL • • • •
Designed for lyophilization and freeze drying applications 4, 5 and 10 mL size Screw threads eliminate use of crimp seal Choice of solid or open top screw cap
#OMPLETE¬#OAT¬3TOPPER
Heavy wall construction designed for lyophilization and freeze drying. Manufactured from Wheaton 33 low extractable clear borosilicate glass that conforms to ASTM Type I, Class A and USP Type I requirements. Stoppers and accessories listed below.
Straight Plug Stopper
Cat. No.
Wheaton’s new Complete Coat stoppers are completely coated with a polymer that has barrier properties similar to PTFE. The fluorinated polymer coating is all that comes in contact with the sample. As a result, chemical reactions due to unwanted interference with the rubber itself are virtually eliminated. These stoppers are manufactured in a silicone-free environment. A specialized manufacturing process is used to produce extremely low levels of visible and subvisible particles. These stoppers provide users the greatest level of confidence in avoiding interference with samples.
Vacule Vial
Cat. No.
W224100-420 W224100-421
For Mouth ID x OD (mm)
7 x 13 13 x 20
Stopper Style
Stopper Material
Shelf Pack
Qty/Case
Straight Plug Straight Plug
Gray Bromobutyl/39 Gray Bromobutyl/39
100 100
1000 1000
For a broader selection of aluminum seals and rubber stoppers see the Caps and Closures Section, pages 32-34. WHEATON
651954 651905 651907 Cat. No.
Size (mL)
Dia x H (mm)
Accepts Cap Finish Size
Fits Rack
Qty/Case
4 5 10
17 x 45 22 x 40 22 x 55
15-425 22-350 22-350
868810 868805 868805
200 200 200
Description
Qty/Pack Qty/Case
Screw Caps and Stoppers for Cat. No. 651954, 4 mL Vacule 224100-080 224100-093 240209 W240509
Natural red rubber stopper Gray Chlorobutyl/50 stopper, 2-Leg Cap, solid top, rubber liner, 15-425 screw thread Cap, open top, without liner, 15-425 screw thread
100 100 200 200
1000 1000 200 200
Screw Caps and Stoppers for Cat. No. 651905 and 651907, 5 & 10 mL Vacule 224100-172 224100-194 224100-202 239853
Natural red rubber stopper Gray Chlorobutyl/50 stopper, 2-Leg Gray Chlorobutyl/50 stopper, 3-Leg Cap, solid top, without liner, 22-350 screw thread
1.800.225.1437 (U.S. & Canada only) | +1.856.825.1100 | +1.856.825.1368 (F) | www.wheatonsci.com
100 100 100 500
1000 1000 1000 500
111
0IPETTES ¬Socorex
!CURA ¬manual¬¬0IPETTES -ODELS¬ ¬lXED ¬ ¬MICRO ¬ ¬MACRO ¬ ¬MULTI • • • • • • •
Digital display window for permanent volume visibility Exceptional, user-friendly ergonomics Shock, heat, chemicals and UV light resistance JusTip™ adjustable tip ejection mechanism Swift-set user calibration system Lightweight, 3 - 7 oz (88 - 203 g) depending on model Three year warranty
The Acura® manual are precision pipettes designed and built with the users in mind. They combine high-tech materials with exceptional, user-friendly ergonomics. Whether in research or routine applications, they bring much more than superior performance and make pipetting safe and agreeable. Entirely autoclavable at 121°C/250°F.
#OMFORTABLE¬PIPETTING The Acura® manual fits everybody’s hand with or without a glove. Ergonomic shape, light weight and ultra-soft plunger travel offers a pleasant pipetting feeling. The Acura manual models include fixed and adjustable volume pipettes. • • • • •
Swift-set Instant calibration The swift-set user calibration system with integrated key and locking mechanism makes tedious procedures a thing of the past. Easy and precise, it is in full compliance with international standards and recommendations.
815 fixed volumes (1 – 1000 μL) See page 113 835F fixed volumes (2 – 10 mL) See page 113 825 micro variable volumes (0.1 – 1000 μL) 835 macro variable volumes (0.2 – 10 mL) 855 multi 8 and 12 channel (0.5 – 350 μL)
Maximum comfort from ergonomic shape, lightweight feel, & ultra-soft plunger activation Reliable micrometric volume adjustment keeps gloves from tearing
Smart and reliable volume adjustment State-of-the-art micrometric volume setting is performed smoothly and precisely by turning push button. Finely machined click-stops and free rotating cap prevent any unwanted volume alteration.
Ergonomically positioned tip ejection allows for easy tip disposal
JusTip™ Tip ejection – easier than ever Ergonomically positioned, the large surface, soft padded ejector button provides for low-pressure activation. In addition to ease of tip ejection, the shaft height adjustment system called JusTip™ – controlled by efficient click-stops – allows a wide selection of tips to tightly fit the nozzle.
Digital display is visible at all times during pipetting Optimal working position In addition to ergonomic design and perfect hand fitting of the pipette, the multichannel volumetric module revolves for added user comfort.
Swift-set calibration system fully complies with international standards & recommendations
WHEATON
Adjustable tip ejector Position of tip ejector can be adjusted in no time within a 4 mm span to perfectly match to tip used. Bowed shape of ejector head guarantees effortless, easy sequential tip ejection.
1.800.225.1437 (U.S. & Canada only) | +1.856.825.1100 | +1.856.825.1368 (F) | www.wheatonsci.com
0IPETTES ¬Socorex For pipette tips and accessories see pages 119-120.
Pipette Tips. Choose from a wide selection of tips made from high grade, virgin metal-free polypropylene.
Nozzle Filters
Pasteur Pipette Adapter
Nozzle Filters add protection from pipette contamination on Socorex Acura manual 810 dilution pipette, 835 (2, 5 and 10 mL), Calibra digital 832 (2 and 10 mL) and Acura electro 935 (5 and 10 mL) model pipettes. Pasteur Pipette Adapter allows for use of glass Pasteur pipets with Acura manual 835 5 mL model. Adapter is provided with Calibra digital 832 2 mL model.
Smartie Caps provide a way to color code your Socorex pipette with 14 different colors.
See the cost-effective Triopack on page 113.
Cat. No.
Volume
Division
Tip Style
Min. Vol
Inaccuracy (E%) Mid. Vol. Max. Vol.
Imprecision (CV%) Qty/ Min. Vol Mid. Vol. Max. Vol. Case
Acura® manual 825 micro W810300 W810302 W810304 W810306 W810308 W810310 W810312 W810314
0.1 – 2 μL 0.002 μL Ultra 10 μL 0.5 – 10 μL 0.01 μL Ultra 10 μL 1 – 10 μL 0.01 μL 200 μL 2 – 20 μL 0.02 μL 200 μL 5 – 50 μL 0.1 μL 200 μL 10 – 100 μL 0.1 μL 200 μL 20 – 200 μL 0.2 μL 200 μL 100 – 1000 μL 1 μL 1000 μL
< ± 6.0% 1) < ± 2.5% 2) < ± 2.5% < ± 2.5% < ± 1.5% < ± 1.5% < ± 1.5% < ± 1.5%
< ± 4.0% < ± 1.8% < ± 1.8% < ± 1.8% < ± 1.3% < ± 1.2% < ± 1.1% < ± 1.0%
< ± 2.0% < ± 1.0% < ± 1.0% < ± 1.0% < ± 1.0% < ± 0.8% < ± 0.6% < ± 0.5%
< 5.0% 1) < 1.8% 2) < 2.5% < 1.7% < 1.0% < 1.0% < 0.6% < 0.5%
< 3.3% < 1.2% < 1.6% < 1.1% < 0.7% < 0.6% < 0.4% < 0.4%
< 1.5% < 0.5% < 0.7% < 0.5% < 0.4% < 0.2% < 0.2% < 0.2%
1 1 1 1 1 1 1 1
< 0.6% < 0.5% < 0.4% < 0.5% < 0.3% < 0.2%
1 1
Reagent Reservoirs are designed for maximum recovery of liquid reagents.
Acura® manual 835 macro W810316 W810318 Cat. No.
0.2 – 5 mL 1 – 10 mL
0.01 mL 0.01 mL
5 mL 10 mL
Volume
Division
Tip Style
< ± 1.5% < ± 1.1% < ± 0.6% < ± 1.5% < ± 0.7% < ± 0.5% Min. Vol
Inaccuracy (E%) Mid. Vol. Max. Vol.
Imprecision (CV%) Qty/ Min. Vol Mid. Vol. Max. Vol. Case
Acura® manual 855 8-channel W810600 W810602 W810603 W810604
0.5 – 10 μL 5 – 50 μL 20 – 200 μL 40 – 350 μL
0.01 μL Ultra 10 μL 0.1 μL 200 μL 0.2 μL 200 μL 0.4 μL 350 μL
< ± 3.5% 1) < ± 1.0% < ± 0.9% < ± 1.0%
< ± 2.5% < ± 0.9% < ± 0.8% < ± 0.9%
< ± 1.5% < ± 0.8% < ± 0.7% < ± 0.8%
< 3.0% 1) < 1.0% < 0.6% < 0.6%
< 2.0% < 0.7% < 0.5% < 0.5%
< 1.0% < 0.4% < 0.3% < 0.3%
1 1 1 1
< ± 3.5% 1) < ± 1.0% < ± 0.9% < ± 1.0%
< ± 2.5% < ± 0.9% < ± 0.8% < ± 0.9%
< ± 1.5% < ± 0.8% < ± 0.7% < ± 0.8%
< 3.0% 1) < 1.0% < 0.6% < 0.6%
< 2.0% < 0.7% < 0.5% < 0.5%
< 1.0% < 0.4% < 0.3% < 0.3%
1 1 1 1
Acura® manual 855 12-channel W810606 W810608 W810609 W810610
0.5 – 10 μL 5 – 50 μL 20 – 200 μL 40 – 350 μL
0.01 μL Ultra 10 μL 0.1 μL 200 μL 0.2 μL 200 μL 0.4 μL 350 μL
Performance values obtained with double distilled water at constant temperature (± 0.5°C) comprised between 20 and 25°C in accordance with 1) 2) measured at 0.5 μL measured at 1 μL EN ISO 8655.
When needing calibration and repair for your Socorex pipettes contact Wheaton Customer Service.
WHEATON
Model 337
Model 340
Work Stations provide a space saving storage place for all your pipettes, including other brand pipettes. How to Use a Socorex Pipette. Increase the longevity of your Socorex pipettes by helping students and new laboratory personnel learn the proper way to use and store pipettes. See page 162 for details.
1.800.225.1437 (U.S. & Canada only) | +1.856.825.1100 | +1.856.825.1368 (F) | www.wheatonsci.com
112
113
0IPETTES ÂŹSocorex !CURAÂ&#x161; ďŹ xed 0IPETTES -ODELSÂŹ &
â&#x20AC;˘ â&#x20AC;˘ â&#x20AC;˘ â&#x20AC;˘ â&#x20AC;˘ â&#x20AC;˘
1 ÎźL to 10 mL Slim ergonomic design and light weight Ultra-soft plunger activation JusTipâ&#x201E;˘ adjustable tip ejection system User calibration with integrated key Color coding
Cat. No.
Volume
Tip style
Inaccuracy (E%)
Inprecision (CV%)
Ultra 10 ÎźL Ultra 10 ÎźL Ultra 10 ÎźL 200 ÎźL 200 ÎźL 200 ÎźL 200 ÎźL 200 ÎźL 200 ÎźL 200 ÎźL 200 ÎźL 200 ÎźL 200 ÎźL 200 ÎźL 200 ÎźL 200 ÎźL 200 ÎźL 200 ÎźL 200 ÎźL 1000 ÎźL 1000 ÎźL 1000 ÎźL 1000 ÎźL 1000 ÎźL 1000 ÎźL 1000 ÎźL 1000 ÎźL 1000 ÎźL 1000 ÎźL
< Âą 2.0% < Âą 1.4% < Âą 0.7% < Âą 0.7% < Âą 0.7% < Âą 0.75% < Âą 0.7% < Âą 0.7% < Âą 0.7% < Âą 0.7% < Âą 0.7% < Âą 0.7% < Âą 0.7% < Âą 0.7% < Âą 0.7% < Âą 0.7% < Âą 0.7% < Âą 0.7% < Âą 0.7% < Âą 0.7% < Âą 0.7% < Âą 0.7% < Âą 0.7% < Âą 0.7% < Âą 0.7% < Âą 0.7% < Âą 0.7% < Âą 0.7% < Âą 0.6%
< 1.0% < 1.0% < 0.7% < 0.8% < 0.5% < 0.5% < 0.6% < 0.6% < 0.5% < 0.4% < 0.5% < 0.4% < 0.4% < 0.35% < 0.3% < 0.3% < 0.4% < 0.3% < 0.3% < 0.4% < 0.4% < 0.3% < 0.3% < 0.3% < 0.2% < 0.2% < 0.2% < 0.2% < 0.2%
1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1
2 mL 5 mL 5 mL 10 mL
< Âą 0.8% < Âą 0.8% < Âą 0.7% < Âą 0.5%
< 0.5% < 0.5% < 0.4% < 0.2%
1 1 1 1
Qty/Case
Acura ďŹ xed 815
&
3MARTIEÂŹ#APS Smartie Caps provide a way to color code your Socorex pipette with 14 different colors. See page 120 for details.
W810000 W810002 W810004 851206 W810006 W810008 W810010 W810012 W810014 W810016 W810018 W810020 W810022 W810024 W810026 W810028 W810030 W810032 W810034 W810036 W810038 W810040 W810042 W810044 W810046 W810048 W810050 W810052 W810054
1 ÎźL 5 ÎźL 10 ÎźL 10Y ÎźL 15 ÎźL 20 ÎźL 25 ÎźL 30 ÎźL 40 ÎźL 50 ÎźL 60 ÎźL 70 ÎźL 75 ÎźL 80 ÎźL 90 ÎźL 100 ÎźL 120 ÎźL 150 ÎźL 200 ÎźL 250 ÎźL 300 ÎźL 400 ÎźL 500 ÎźL 600 ÎźL 700 ÎźL 750 ÎźL 800 ÎźL 900 ÎźL 1000 ÎźL
Acura ďŹ xed 835F W810056 W810058 W810060 W810062
2 mL 2.5 mL 5 mL 10 mL
Performance values obtained with double distilled water at constant temperature (¹ 0.5°C) comprised between 20 and 25°C in accordance with EN ISO 8655.
!CURAÂ&#x161;ÂŹmanualÂŹ4RIOPACK â&#x20AC;˘ Three adjustable micropipettes â&#x20AC;˘ Large choice of volumes â&#x20AC;˘ Cost effective prices
This ready-to-use set includes three AcuraÂŽ manual adjustable pipettes, tip samples, QC certiďŹ cate and operating instructions. There are eight different Triopacks available, each covering speciďŹ c volumes. The full coverage stretches between 0.1 ÎźL and 10 mL. Triopack brings a major price/ quality advantage matching budget constraints.
Cat. No.
W810319 W810320 W810321
Contents (Micro/macropipette models)
2 ÎźL (0.1 â&#x20AC;&#x201C; 2) 2 ÎźL (0.1 â&#x20AC;&#x201C; 2) 10Y ÎźL (1 â&#x20AC;&#x201C; 10)
10 ÎźL (0.5 â&#x20AC;&#x201C; 10) 20 ÎźL (2 â&#x20AC;&#x201C; 20) 50 ÎźL (5 â&#x20AC;&#x201C; 50)
WHEATON
50 ÎźL (5 â&#x20AC;&#x201C; 50) 200 ÎźL (20 â&#x20AC;&#x201C; 200) 200 ÎźL (20 â&#x20AC;&#x201C; 200)
Cat. No.
W810323 W810324 W810325
Contents (Micro/macropipette models)
10Y ÎźL (1 â&#x20AC;&#x201C; 10) 20 ÎźL (2 â&#x20AC;&#x201C; 20) 50 ÎźL (5 â&#x20AC;&#x201C; 50)
100 ÎźL (10 â&#x20AC;&#x201C; 100) 200 ÎźL (20 â&#x20AC;&#x201C; 200) 200 ÎźL (20 â&#x20AC;&#x201C; 200)
1000 ÎźL (100 â&#x20AC;&#x201C; 1000) 1000 ÎźL (100 â&#x20AC;&#x201C; 1000) 1000 ÎźL (100 â&#x20AC;&#x201C; 1000)
Cat. No.
W810326 W810327
Contents (Micro/macropipette models)
100 ÎźL (10 â&#x20AC;&#x201C; 100) 1000 ÎźL (100 â&#x20AC;&#x201C; 1000)
1.800.225.1437 (U.S. & Canada only) | +1.856.825.1100 | +1.856.825.1368 (F) | www.wheatonsci.com
1000 ÎźL (100 â&#x20AC;&#x201C; 1000) 5 mL (0.5 â&#x20AC;&#x201C; 5)
5 mL (0.5â&#x20AC;&#x201C; 5) 10 mL (1 â&#x20AC;&#x201C; 10)
0IPETTES ¬Socorex For pipette tips and accessories see pages 119-120.
Pipette Tips. Choose from a wide selection of tips made from high grade, virgin metal-free polypropylene.
!CURA ¬$ILUTION¬0IPETTE -ODEL¬ • • • • • •
Nozzle Filters
Two pre-calibrated fixed volumes – no setting required Smooth activation, excellent ergonomics JusTip™ system for height adjustment of tip ejector Easy maintenance, cleaning and disinfection Fully autoclavable 121°C/250°F Three year warranty
Pasteur Pipette Adapter
Nozzle Filters add protection from pipette contamination on Socorex Acura manual 810 dilution pipette, 835 (2, 5 and 10 mL), Calibra digital 832 (2 and 10 mL) and Acura electro 935 (5 and 10 mL) model pipettes.
Air displacement pipette with two pre-calibrated steps allows subsequent pipetting of 1 and 0.1 mL of the same liquid. Metal nozzle fits long straw tip to aspirate from narrow or deep reservoirs (i.e. Stomacher® bags). Ideal alternative to the graduated glass pipettes when performing serial 1:10 dilutions in bacteriology. Cat. No.
Description
Volume
Inaccuracy (E%)
Inprecision (CV%)
Qty/Case
851343
Acura manual 810
1 mL 0.1 mL
< ± 0.4% < ± 2.0%
< ± 0.4% < ± 2.5%
1
—
—
Pasteur Pipette Adapter allows for use of glass Pasteur pipets with Acura manual 835 5 mL model. Adapter is provided with Calibra digital 832 2 mL model.
Accessories 851344
Straw Tips, Sterile, Polypropylene 190 mm in length
—
No setting required Two fixed volumes within one plunger travel. Innovative dual calibration Both volumes of 1 mL and 0.1 mL can be calibrated independently from each other.
1
2
20 x 25/pk
JusTip™ ejector Turn left or right to adjust ejector to strawtip position on the nozzle.
Smartie Caps provide a way to color code your Socorex pipette with 14 different colors.
Reagent Reservoirs are designed for maximum recovery of liquid reagents.
Straw tips First class polypropylene (L: 190 mm, Inside Dia: 4 mm) specially designed for narrow vials and Stomacher® bags. No blocking by particles in suspension.
3 Simple operation
WHEATON
1
Depress plunger button in full, then release slowly to aspirate 1.1 mL
2
Depress plunger button to first stop, thus dispensing 1 mL in Petri dish
3
Depress plunger button to second stop, thus dispensing residual 0.1 mL in next Petri dish
Model 337
Model 340
Work Stations provide a space saving storage place for all your pipettes, including other brand pipettes. How to Use a Socorex Pipette. Increase the longevity of your Socorex pipettes by helping students and new laboratory personnel learn the proper way to use and store pipettes. See page 162 for details.
1.800.225.1437 (U.S. & Canada only) | +1.856.825.1100 | +1.856.825.1368 (F) | www.wheatonsci.com
114
115
0IPETTES ¬Socorex
4HE¬!CURA ¬electro¬0IPETTES -ODELS¬ ¬MICRO ¬ ¬MACRO ¬ ¬MULTI
• • • • • • • •
Optimized ergonomics and working comfort Lightweight Easy, intuitive, self-teaching program Right or left display reading Swift-interchange battery pack Innovative, adjustable tip ejection Electronic control unit fits other volumetric modules One year warranty
The Acura® electro is making electronic pipetting simpler and safer than ever. The instrument includes a microprocessor-controlled motor and a rechargeable 4.8 V battery. Intuitive control software allows for quick access to five working modes and many volumes to select from.
• Model 925 (0.5 – 1000 uL) • Model 935 (0.25 – 10 mL) • Model 955 8 and 12 channel (0.5 – 350 uL)
Natural ergonomics
The Acura® electro offers shape, balance and working ergonomics resembling those of a manual instrument. Comfort is so greatly improved that pipetting and resulting consistency are outstanding! Unique “right or left” display reading
User converts displayed information for right or left side reading. All necessary elements are visible at a glance during programming, pipetting and calibration steps.
Variable working speed
Located on the front side, the speed selector allows instant change even during the pipetting process. In addition, slow speed can be activated at any time by gentle touch of the start button. Time efficient maintenance
Clever pipette construction limits maintenance to a minimum and requires no tool for disassembling the volumetric modules. Whenever sterilization is needed, the volumetric modules can be autoclaved at 121°C/250°F.
Tip ejection – easier than ever
Maximum efficiency is obtained with a large, ergonomically located ejector button. The shaft height adjustment system called JusTip™ (4 mm span) – controlled by efficient click-stops – allows a wide selection of tips for a tight nozzle fit.
Smart battery packs
The NiMH battery pack is located in the power handle. It can be removed and changed in a second. New 4.8V tension enables fast battery charging (<1.5 hours) and provides extended working autonomy (>3000 consecutive pipetting cycles). When unused, the Acura® electro automatically goes on energy saving stand-by.
On multichannel models, bowed shape of ejector head adds to effortless, easy sequential tip ejection.
Energy Star® qualified power supply for a better environment
Calibration
Control software provides for instant access to calibration menu. Adjustments are performed directly on the instrument’s keyboard. Any inaccurate plunger movement is detected by the microprocessor which warns the user with an error message. WHEATON
Pipette charging stand Stand allows charging and storing of up to three electronic pipettes or battery packs simultaneously. Each position is fitted with a red/green charging LED. It is supplied with every Acura® electro basic package.
Optional battery charging stand Space-saving stand holds up to three battery packs simultaneously. The ideal charging and storage accessory for spare batteries, which are then available at any time.
1.800.225.1437 (U.S. & Canada only) | +1.856.825.1100 | +1.856.825.1368 (F) | www.wheatonsci.com
0IPETTES ¬Socorex For pipette tips and accessories see pages 119-120.
Forward pipetting
Reverse pipetting
Step-wise pipetting
Dilution (up to 3 liquids)
Pipette Tips. Choose from a wide selection of tips made from high grade, virgin metal-free polypropylene. Powerful intelligence The “no gimmick” intuitive control software does not require any particular skills. Avoiding complicated programming steps, there are only a few buttons on the keyboard to give access to the various modes within seconds.
Mixing
)NTERCHANGEABLE¬6OLUMETRIC¬-ODULES To increase pipetting flexibility, one electronic control unit accommodates the other volumetric modules available separately. This alone contributes to make electronic pipetting affordable to all budgets. Initial calibration is necessary before very first use of each additional or replacement volumetric module. Instrument memory retains the calibration data.
Nozzle Filters
Pasteur Pipette Adapter
Nozzle Filters add protection from pipette contamination on Socorex Acura manual 810 dilution pipette, 835 (2, 5 and 10 mL), Calibra digital 832 (2 and 10 mL) and Acura electro 935 (5 and 10 mL) model pipettes. Pasteur Pipette Adapter allows for use of glass Pasteur pipets with Acura manual 835 5 mL model. Adapter is provided with Calibra digital 832 2 mL model.
"ASIC¬0ACKAGE Includes electronic pipette with individual QC certificate, pipette charging stand, fast charger with AC adapter and cord, one additional 4.8 V battery pack, Qualitips® pipette tips samples and operating instructions.
Smartie Caps provide a way to color code your Socorex pipette with 14 different colors. Fast charger with AC adapter Cat. No. Basic Pkg
Cat. No. Pipette
Cat. No. Volumetric Module Volume
Division
Tip Style
Min. Vol
Inaccuracy (E%) Mid. Vol. Max. Vol.
Imprecision (CV%) Qty/ Min. Vol Mid. Vol. Max. Vol. Case
Acura® electro 925 micro W810908-A W810910-A W810912-A W810914-A
W810900 W810902 W810904 W810906
W820015 0.5 – 10 μL W820016 2.5 – 50 μL W820017 10 – 200 μL W820018 50 – 1000 μL
0.05 μL Ultra 10 μL 0.25 μL 200 μL 1.0 μL 200 μL 5.0 μL 1000 μL
< ± 2.5%1) < ± 2.5%2) < ± 1.5%3) < ± 1.5%4)
< ± 1.8% < ± 1.6% < ± 1.1% < ± 1.0%
< ± 1.0% < ± 0.7% < ± 0.6% < ± 0.5%
< 1.8%1) < 1.5%2) < 0.7%3) < 0.5%4)
< 1.2% < 0.9% < 0.5% < 0.4%
< 0.5% < 0.3% < 0.2% < 0.2%
1 1 1 1
5 mL < ± 1.0%5) < ± 0.9% < ± 0.7% 10 mL < ± 0.8%6) < ± 0.7% < ± 0.5%
< 0.6%5) < 0.5% < 0.3% < 0.4%6) < 0.3% < 0.2%
1 1
0.05 μL Ultra 10 μL < ± 3.5%1) < ± 2.5% < ± 1.5% 0.25 μL 200 μL < ± 1.0%2) < ± 0.9% < ± 0.8% 5.0 μL 350 μL < ± 1.0%7) < ± 0.9% < ± 0.8%
< 3.0% 1) < 2.0% < 1.0% < 1.0% 2) < 0.7% < 0.4% < 0.6% 7) < 0.4% < 0.3%
1 1 1
0.05 μL Ultra 10 μL < ± 3.5%1) < ± 2.5% < ± 1.5% 0.25 μL 200 μL < ± 1.0%2) < ± 0.9% < ± 0.8% 5.0 μL 350 μL < ± 1.0%7) < ± 0.9% < ± 0.8%
< 3.0%1) < 2.0% < 1.0% < 1.0%2) < 0.7% < 0.4% < 0.6%7) < 0.4% < 0.3%
1 1 1
Reagent Reservoirs are designed for maximum recovery of liquid reagents.
Acura® electro 935 macro W810916-A W810916 W820024 W810918-A W810918 W820025
0.25 – 5 mL 0.5 – 10 mL
0.05 mL 0.05 mL
Acura® electro 955 8-channel W810924-A W810924 W820026 W810926-A W810926 W820027 W810928-A W810928 W820028
0.5 – 10 μL 2.5 – 50 μL 20 – 350 μL
Acura® electro 955 12-channel W810930-A W810932-A W810934-A
W810930 W820029 W810932 W820030 W810934 W820031
0.5 – 10 μL 2.5 – 50 μL 20 – 350 μL
Performance values obtained with double distilled water at constant temperature (± 0.5°C) comprised between 20 and 25°C in accordance with EN ISO 8655. Performance measured at 1) 1 μL 2) 5 μL 3) 20μL 4) 100 μL 5) 0.5 mL 6) 1 mL 7) 40 μL
!CCESSORIES Cat. No.
Description
W820019 W820020 W820021 W810929-A W820022-A
Pipette charging stand, 3 charging positions, holds micropipettes or power handles Compact charging stand, 3 charging positions, holds power handles only Spare battery pack (power handle) Spare battery pack (power handle) duo pack Power supply with AC adapter, 100-240 V and cord
WHEATON
Qty/Case
1 1 1 2 1
Model 337
Model 340
Work Stations provide a space saving storage place for all your pipettes, including other brand pipettes. How to Use a Socorex Pipette. Increase the longevity of your Socorex pipettes by helping students and new laboratory personnel learn the proper way to use and store pipettes. See page 162 for details.
1.800.225.1437 (U.S. & Canada only) | +1.856.825.1100 | +1.856.825.1368 (F) | www.wheatonsci.com
116
117
0IPETTES ¬Socorex
#ALIBRA ¬DIGITAL¬¬0IPETTES -ODELS¬ ¬MICRO ¬ ¬MACRO ¬ ¬MULTI
Comfort and safety Easy and glove friendly volume setting and tip ejection bring added comfort. No unwanted volume alteration or detipping while working.
Key volume adjustment Example: from 10 to 50 μL in half a revolution of the setting wheel placed in its normal position.
Fine-tuning adjustment Example: from 50 to 55.5 μL in half a revolution of the setting wheel in pulled position.
• • • • • • •
Wind-free instant volume adjustment Unsurpassed performance and calibration stability Robust, long-lasting construction Shock, heat, chemicals and UV light resistance Reliable user calibration Autoclavable at 121°C/250°F fully assembled Three year warranty • Model 822 micro (0.2 – 1000 μL) • Model 832 macro (0.2 – 10 mL) • Model 852 8 (1 – 200 μL) and 12 channel (10 – 200 μL)
Color coding Attractive colored plates and ejector buttons for easy identification of volume range and tip style. Easy in-lab calibration The calibration screw is located under the rubber pad. Engraved divisions help calibrate instrument quickly and precisely. Calibration key supplied with the instrument.
A highly reliable pipette line with instant volume adjustment. The combination of mechanical precision, comfort and ease of use in the same instrument makes the Calibra® digital one of the smartest high-end micropipettes in the market. Instant volume setting Major feature of the Calibra® line, the twin cam system is fitted with pre-calibrated steps providing for true digital volume entry and numerical display. The dual incrementation allows fast volume setting without tedious winding.
WHEATON
Pasteur Pipette Adapter PVDF adapter fits pipette nozzle to accommodate standard glass Pasteur pipettes. FPM O-rings care for effective tightness. Included with each 2 mL Calibra® model.
1.800.225.1437 (U.S. & Canada only) | +1.856.825.1100 | +1.856.825.1368 (F) | www.wheatonsci.com
0IPETTES ¬Socorex For pipettes tips and accessories see pages 119-120.
#ALIBRA ¬DIGITAL¬¬0IPETTES
-ODEL¬ ¬MULTI Pipette Tips. Choose from a wide selection of tips made from high grade, virgin metal-free polypropylene.
Nozzle Filters
Pasteur Pipette Adapter
Nozzle Filters add protection from pipette contamination on Socorex Acura manual 810 dilution pipette, 835 (2, 5 and 10 mL), Calibra digital 832 (2 and 10 mL) and Acura electro 935 (5 and 10 mL) model pipettes. Pasteur Pipette Adapter allows for use of glass Pasteur pipets with Acura manual 835 5 mL model. Adapter is provided with Calibra digital 832 2 mL model.
Smartie Caps provide a way to color code your Socorex pipette with 14 different colors.
360° rotation In addition to ergonomic hand fitting, the pipette volumetric module (lower assembly) revolves for added user comfort.
Alternative ejector head Improved compatibility with long neck tips.
Sequential tip ejection Special shape of ejector head guarantees effortless, sequential easy tip ejection. Cat. No.
Volume
Division
Tip Style
Reagent Reservoirs are designed for maximum recovery of liquid reagents. Min. Vol
Inaccuracy (E%) Mid. Vol. Max. Vol.
Imprecision (CV%) Qty/ Min. Vol Mid. Vol. Max. Vol Case
Calibra® digital 822 micro 851160 851162 851163 851164 851166 851168
0.2 – 2 μL 0.1 μL Ultra 10 μL 1 – 10 μL 0.05 μL Ultra 10 μL 2 – 20 μL 0.1 μL 200 μL 10 – 100 μL 0.5 μL 200 μL 20 – 200 μL 1.0 μL 200 μL 100 – 1000 μL 5.0 μL 1000 μL
< ± 6.0%1) < ± 2.0% < ± 2.0% < ± 1.0% < ± 1.0% < ± 0.7%
< ± 4.0% < ± 1.5% < ± 1.5% < ± 0.9% < ± 0.9% < ± 0.6%
< 5.0%1) < 2.0% < 1.7% < 1.0% < 0.6% < 0.5%
< 3.3% < 1.3% < 1.1% < 0.6% < 0.4% < 0.4%
< ± 1.5% < ± 1.5%
< ± 1.0% < ± 0.5% < ± 1.0% < ± 0.5%
< 0.5% < 0.3%
< 0.3% < 0.2% < 0.3% < 0.15%
1 1
< ± 3.5% < ± 1.0% < ± 0.9%
< ± 2.5% < ± 1.5% < ± 0.9% < ± 0.7% < ± 0.9% < ± 0.7%
< 3.0% < 1.0% < 0.6%
< 2.0% < 1.0% < 0.7% < 0.4% < 0.4% < 0.3%
1 1 1
< ± 1.0% < ± 0.9%
< ± 0.9% < ± 0.7% < ± 0.9% < ± 0.7%
< 1.0% < 0.6%
< 0.7% < 0.4% < 0.4% < 0.3%
1 1
< ± 2.0% < ± 1.0% < ± 1.0% < ± 0.8% < ± 0.8% < ± 0.5%
< 1.5% < 0.5% < 0.5% < 0.2% < 0.2% < 0.2%
1 1 1 1 1 1
Calibra® digital 832 macro 851340 851345
0.2 – 2 mL 1 – 10 mL
0.01 mL 0.1 mL
2 mL 10 mL
Calibra® digital 852 8-channel W851180-2 1 – 10 μL 851183-2 10 – 100 μL 851187-2 20 – 200 μL
0.05 μL Ultra 10 μL 0.5 μL 200 μL 1.0 μL 200 μL
Calibra® digital 852 12-channel 851184-2 851188-2
10 – 100 μL 20 – 200 μL
0.5 μL 1.0 μL
200 μL 200 μL
Performance values obtained with double distilled water at constant temperature (± 0.5°C) comprised between 20 and 25°C in accordance /with EN ISO 8655. 1) measured at 0.5 μL
When needing calibration and repair for your Socorex pipettes contact Wheaton Customer Service. WHEATON
Model 337
Model 340
Work Stations provide a space saving storage place for all your pipettes, including other brand pipettes. How to Use a Socorex Pipette. Increase the longevity of your Socorex pipettes by helping students and new laboratory personnel learn the proper way to use and store pipettes. See page 162 for details.
1.800.225.1437 (U.S. & Canada only) | +1.856.825.1100 | +1.856.825.1368 (F) | www.wheatonsci.com
118
119
0IPETTES ÂŹSocorex 0IPETTEÂŹ4IPS Bulk or rack availability High-density ďŹ lter prevents aerosol contamination DNase and RNase-free ďŹ lter tips Pyrogen-free sterile ďŹ lter tips
835/935
822
855/955
832
852
1 to 10 ÎźL
1 to 10 mL
0.2 to 2 mL
20 to 200 ÎźL
0.1 to 2 ÎźL
100 to 1000 ÎźL
0.4 mm gel seq, 4 racks of 200 800
20 to 200 ÎźL
851178
10 to 100 ÎźL
X
2 to 20 ÎźL
X
1 to 10 ÎźL
X
0.2 to 2 ÎźL
X
40 to 350 ÎźL
X X
20 to 200 ÎźL
N N X
5 to 50 ÎźL
N
0.5 to 10 ÎźL
N
1 to 10 mL
0.2 mm gel seq, 4 racks of 200 800
0.5 to 5 mL
X
851176
2 mL, 2.5 mL
X
100 to 1000 ÎźL
X
X
10 to 100 ÎźL
X
X
5 to 50 ÎźL
X
X X
2 to 20 ÎźL
X X
N N X
1 to 10 ÎźL (Y)
N N X
N
0.5 to 10 ÎźL
N
N
250 to 1000 ÎźL
N
800
120 to 200 ÎźL
1000
Long Tip, 4 racks of 200
25 to 100 ÎźL
Short Tip, 10 racks of 100
851174
ÂŹ
10Y/15/20 ÎźL
851172
ÂŹ
up to 10 ÎźL
Description
Sterile
Cat No.
-ICROTIPS ÂŹ ÂŹÂŤ,ÂŹ
Pyrogen Free
Filtered
825/925
DNase, RNase Free
815
#ALIBRAÂ&#x161;ÂŹdigital
20 to 200 ÎźL
!CURAÂ&#x161;ÂŹmanual !CURAÂ&#x161;ÂŹelectro
10 to 100 ÎźL
â&#x20AC;˘ â&#x20AC;˘ â&#x20AC;˘ â&#x20AC;˘
â&#x20AC;˘ Made from high grade, virgin, metal-free polypropylene â&#x20AC;˘ Wide selection, superior quality â&#x20AC;˘ Precision injection molding care for air-tight ďŹ t â&#x20AC;˘ Lot-by-lot consistency
ÂŹ Qty/Case X
N
N
N N X
X X
X
X
X
X
W851239-01 10 racks of 96 tips
960
N
N
N N X
X X
X
X
X
X
W851239-02 10 racks of 96 tips
960
N
N
N Y
X
X X
X
X
X
X
W851239-03 Bulk pack of 1000 tips
1000
N
N
N N X
X X
X
X
X
X
-ICROTIPS ÂŹ ÂŹÂŤ,ÂŹÂŹ
ÂŹ
ÂŹ
ÂŹ
ÂŹ
ÂŹ
ÂŹ
ÂŹ
Cat No.
Description
851179-01
Individually wrapped
Qty/Case 1000
Y
Y
Y
Y
X
X
X
X
X X
X
X
X
X
851179-02
10 racks of 96 tips
960
Y
Y
Y
Y
X
X
X
X
X X
X
X
X
X
-ICROTIPS ÂŹ ÂŹÂŤ,ÂŹÂŹ
ÂŹ
ÂŹ
ÂŹ
ÂŹ
ÂŹ
ÂŹ
ÂŹ
Cat No.
Description
851246
10 racks of 96 tips
Qty/Case 960
N
N
N N
X
X
X
X
X
X X
X
X
X
X
X
X
X X
851247
10 racks of 96 tips
960
N
N
N Y
X
X
X
X
X
X X
X
X
X
X
X
X
X X
851248
Bulk pack of 1000 tips
1000
N
N
N N
X
X
X
X
X
X X
X
X
X
X
X
X
X X
851271
Bulk pack of 1000 tips
1000
N
N
N N
X
X
X
X
X
X X
X
X
X
X
X
X
X X
851272
10 racks of 96 tips
960
N
N
N N
X
X
X
X
X
X X
X
X
X
X
X
X
X X
X X
-ICROTIPS ÂŹ ÂŹÂŤ,ÂŹ
ÂŹ
ÂŹ
ÂŹ
ÂŹ
ÂŹ
ÂŹ
ÂŹ
Cat No.
Description
Qty/Case
851181-01
Bulk pack of 1000 tips
1000
Y
Y
N N
X
X
X
X
X
X X
X
X
X X1)
X
X
X
851181-02
10 racks of 96 tips
960
Y
Y
N N
X
X
X
X
X
X X
X
X
X X1)
X
X
X
X X
851181-03
Individually wrapped
1000
Y
Y
Y
Y
X
X
X
X
X
X X
X
X
X X1)
X
X
X
X X
851181-04
10 racks of 96 tips
960
Y
Y
Y
Y
X
X
X
X
X
X X
X
X
X X1)
X
X
X
X X
-ICROTIPS ÂŹ ÂŹÂŤ,ÂŹ Cat No.
Description
851276
Bulk pack of 1000 tips
Qty/Case 1000
N
N
N N
X
X
X
851277
10 racks of 100 tips
1000
N
N
N N
X
X
X
851180-01
Individually wrapped
1000
N
Y
N Y
X
X
X
851180-02
10 racks of 96 tips
960
N
Y
N N
X
X
X
-ACROTIPS ÂŹ ÂŹ ÂŹ ÂŹM, Cat No.
Description
851355
2 mL - bulk pack of 250 tips
Qty/Case 250
N
N
N N
851357
5 mL - bulk pack of 250 tips
250
N
N
N N
851358
10 mL - bulk pack of 100 tips
100
N
N
N N
W851362
5 mL - 2 bulk packs of 250 tips 500
N
N
N N
X
W851363
5 mL - 2 racks of 50 tips
N
N
N N
X
100
X
X X X
1) Tip capacity is 300 ÎźL
WHEATON
1.800.225.1437 (U.S. & Canada only) | +1.856.825.1100 | +1.856.825.1368 (F) | www.wheatonsci.com
X
0IPETTES ¬Socorex
120
!CCESSORIES
Reagent Reservoirs Nozzle Filters for Pipettes Add protection against liquid fill or pipette contamination. Filters are interchangeable, non sterile, non autoclavable. Fits Socorex macro model pipettes. Cat. No.
Fits
Material
Qty/Bag
851341 W851342
Calibra® manual 832, 2 mL Acura® manual 835, 2 and 5 mL Acura® electro 935, 5 mL Calibra® digital 832, 10 mL Acura® electro 935, 10 mL Acura® manual 835, 10 mL
Cellulose Cellulose
250 250
PP fibers
100
851346
Pasteur Pipette Adapter
Cat. No.
Style
W851364 W851365 W851239 W851368 851249 851250
PP, V-shaped, no lid PP, V-shaped, hinged lid PS, 8-channel, no lid PS, 12-channel, no lid PP, V-shaped, no lid PP, V-shaped, no lid
Volume (mL)
Sterile
70 125 40 40 75 75
No No Yes Yes No Yes
Size (mm) Qty/Pack
58 x 132 x 25 83 x 121 x 34 83 x 126 x 13 83 x 126 x 13 48 x 127 x 32 48 x 127 x 32
20 20 10 10 10 10
Materials are PP (Polypropylene) and PS (Polystyrene).
Disposable Pasteur Pipette
Pasteur Pipette Adapter PVDF adapter fits pipette nozzle to accommodate standard glass Pasteur pipettes. FPM O-rings care for effective tightness. Included with each 2 mL Calibra® model. Optional for Acura® manual 835 and Acura® electro 935 5 mL models. Cat. No.
Description
W820023
For model 835 and 935, 5 mL
Qty/Pack
1
Disposable Pasteur Pipettes
Work Station 337
Cat. No. Overall Length (mm) Tip Length (mm) Body Length (mm) Shelf Pack
357331 357335
146 228
45 108
101 120
Work Station 340
Qty/Case
200 200
1000 1000
7ORK¬3TATIONS 7-position work station Space-saving pipette stand holds up to seven single-channel pipettes of most brands. Made of sturdy polyamid material, easy to clean. Anti-slip pads guarantee bench stability. The work station fits new and old generations of Socorex and other brand pipettes. 3-position multi- and single- channel pipette work station Innovative design fits all Calibra®and Acura® models. Easy reach of each instrument. Heavy bottom plate and anti-slip pads guarantee high stability. Made of polyamid material, easy to clean.
Smartie Caps The Acura® pipettes have color-coded display windows and smarties button caps. Other color combinations are desirable for individual, lab or department identification; choose among 14 colors of smarties, or pick the smartie mix which contains all colors. Cat. No.
Color
Qty/Pack
Cat. No.
Color
Qty/Pack
Smarties plunger caps W820000 W820001 W820002 W820003 W820004 W820005 W820006
White Grey Vanilla Lemon Yellow Orange Red
6 6 6 6 6 6 6
W820007 W820008 W820009 W820010 W820011 W820012 W820013
Rose Pink Purple Ice blue Blue Mint Green
6 6 6 6 6 6 6
Work station 340 also fits the Acura® 810 dilution pipette and Acura® 865 microdispenser pipettes. Cat. No.
Color code
Fits
W851361 W851354 W851356 W851359 W851360
Light grey Ice blue Vanilla yellow Mint green Pastel rose
7 single-channel pipette 7 single-channel pipette 7 single-channel pipette 7 single-channel pipette 7 single-channel pipette
1 1 1 1 1
3 multi- or single-channel pipette
1
Work station model 340 W851369
Light grey
Smartie mix W820014
Assorted colors
14
WHEATON
Qty/Pack
Universal work station model 337
1.800.225.1437 (U.S. & Canada only) | +1.856.825.1100 | +1.856.825.1368 (F) | www.wheatonsci.com
0IPETTES ÂŹSocorex
121
!CURAÂ&#x161;ÂŹPOSITIVEÂŹÂŹ$ISPLACEMENTÂŹ0IPETTEÂŹ -ODELÂŹ â&#x20AC;˘ â&#x20AC;˘ â&#x20AC;˘ â&#x20AC;˘ â&#x20AC;˘
Color coding Pipette, plunger tip and glass capillary bear color coding for easy volume identiďŹ cation.
Step-wise volume adjustment Interchangeable plunger and glass capillary Matching color codes on pipette, plunger and capillary Stainless steel, PTFE-tipped plunger Three year warranty
Work station
For two positive displacement pipettes
Pipettes with PTFE-tipped plunger provide for positive displacement of sample in a precision capillary tube. Optimal accuracy and reproducibility when pipetting high-density, viscous, foaming or volatile liquids. Five models cover a range from 1 to 200 ÎźL. Cat. No. Volume
851295 851299 851303 851307 851311
Color Code
1-2-3-4-5 ÎźL White 5-10-15-20-25 ÎźL 2x white 10-20-30-40-50 ÎźL Green 60-75-80-90-100 ÎźL Blue 100-120-150-175-200 ÎźL Red
Inaccuracy (E%) Mid. Vol. Max. Vol.
Min. Vol
< Âą 3.0% < Âą 1.4% < Âą 0.7% < Âą 0.7% < Âą 0.7%
< Âą 2.3% < Âą 1.0% < Âą 0.7% < Âą 0.7% < Âą 0.7%
< Âą 2.0% < Âą 0.8% < Âą 0.7% < Âą 0.7% < Âą 0.7%
Imprecision (CV%) Min. Vol Mid. Vol. Max. Vol.Qty/Case
< 2.0% < 0.8% < 0.7% < 0.3% < 0.3%
< 1.4% < 0.6% < 0.5% < 0.3% < 0.3%
< 0.8% < 0.4% < 0.3% < 0.3% < 0.3%
Cat. No.
Color
Qty/Pk
W830030
Red
1
1 1 1 1 1
Performance values obtained with double distilled water at constant temperature (¹ 0.5°C) comprised between 20 and 25°C /in accordance with EN ISO 8655.
!CCESSORIESÂŹ Cat. No.
Color code
Qty/Pack
851321 851322 851323 851324 851325
Cat. No.
Color code
Qty/Pack
Spare Plungers
Spare Glass Capillaries White 2x white Green Blue Red
200 200 200 200 100
851330 851331 851332 851333 851334
Steel White Green Blue Red
5 5 5 5 5
Color coding Ecostepâ&#x201E;˘ syringe and elector button bear color coding to eliminate any setting error.
4HE3TEPPERŠ
p Fingverattiion Acti
2EPEATERÂŹ0IPETTE â&#x20AC;˘ 4-ďŹ nger activation â&#x20AC;˘ Setting knobs bear clear indication of volume and number of aliquots â&#x20AC;˘ Three positive displacement syringes, color coded â&#x20AC;˘ Self-locking mechanism â&#x20AC;˘ One year warranty
Stand sold separately
Highly comfortable pipette intended for reliable repeat dispensing within 10 to 5000 ÎźL. Unique trigger action mechanism eliminates thumb fatigue. Selected materials offer good shock resistance. Compact shape greatly limits internal instrument contamination. Large selection among 53 different volumes; up to 73 doses per ďŹ lling. Cat. No.
Description
851601 851625 W835010
Stepperâ&#x201E;˘ 411 incl. 3 color coded selector buttons, adapter, Ecostepâ&#x201E;˘ syringe samples Replacement adapter for red Ecostepâ&#x201E;˘ syringe Stand for one Stepper
Qty/Pack
Cat. No.
Volume
Color
/P PG BMJRVPUT
7PMVNF Ä&#x203A;-
7PMVNF Ä&#x203A;-
7PMVNF Ä&#x203A;-
73 49 36 29 24 20 18 15 14 12 11 10 9 8 8 7 7 7 6
10 15 20 25 30 35 40 45 50 55 60 65 70 75 80 85 90 95 100
50 75 100 125 150 175 200 225 250 275 300 325 350 375 400 425 450 475 500
500 750 1000 1250 1500 1750 2000 2250 2500 2750 3000 3250 3500 3750 4000 4250 4500 4750 5000
1 5 1
Syringe Sterile Performance Capacity Ind. Wrapped at Inaccuracy (E%) Imprecision
Qty/Case
0.75 mL 0.75 mL 3.75 mL 3.75 mL 37.5 mL 37.5 mL
100/box 100/box 100/box 100/box 100/box 100/box
Ecostep Syringes 851604 851616 851608 851620 851612 851624
10 â&#x20AC;&#x201C; 100 ÎźL 10 â&#x20AC;&#x201C; 100 ÎźL 50 â&#x20AC;&#x201C; 500 ÎźL 50 â&#x20AC;&#x201C; 500 ÎźL 500 â&#x20AC;&#x201C; 5000 ÎźL 500 â&#x20AC;&#x201C; 5000 ÎźL
Yellow Yellow Blue Blue Red Red
no yes no yes no yes
20 ÎźL 100 ÎźL 100 ÎźL 500 ÎźL 1000 ÎźL 5000 ÎźL
< Âą 2.0% < Âą 1.0% < Âą 1.0% < Âą 0.7% < Âą 0.5% < Âą 0.5%
< 2.3% < 0.6% < 1.8% < 0.4% < 1.2% < 0.4%
Performance values obtained with double distilled water at constant temperature (¹ 0.5°C) comprised between 20 and 25°C.
WHEATON
Clear setting indication After inserting disposable syringe, select appropriate volume. Markings on interchangeable selector buttons allow direct reading of set volume and corresponding number of aliquots.
1.800.225.1437 (U.S. & Canada only) | +1.856.825.1100 | +1.856.825.1368 (F) | www.wheatonsci.com
0IPETTES ¬Socorex 1
2 Excellent ergonomics Instrument shape and lightweight offer convenient pipetting comfort. Smooth plunger activation drastically reduces hand fatigue.
3
New Convenient dispensing Reliable valve system ensures high performance dispensing, dose after dose. It revolves to allow selection of the best working position.
!CURA ¬MANUAL¬¬3ELF 2ElLLING¬¬ -ICRODISPENSER¬0IPETTE¬ -ODEL¬ • • • • • • •
Excellent ergonomics Soft plunger activation Versatile feeding through bottle, tubing or syringe No need for consumables Swift-set in-lab calibration Autoclavable fully assembled at 121°C/250°F Three year warranty
Swift-set calibration Easy and precise system with integrated key and locking mechanism, making tedious procedures a thing of the past.
Hand-held, self-refilling microdispenser intended for repeat distribution of microliter volumes. Carefully selected materials ensure durability and resistance to aggressive media. The Acura® manual 865 combines easy handling of a regular micropipette with the flexibility of a repeater pipette. There is no need for plastic tips or consumables, which may represent substantial savings. Includes: 90 cm silicone tubing, SS blunt end cannula, female Luer inlet valve cap, Q.C. certificate and operating instructions. Cat. No.
W835001 W835002 W835004
Volume
Division
Min. Vol
5-50 μL 20-200 μL 100-1000 μL
0.1 μL 0.2 μL 1.0 μL
< ± 5.0% < ± 2.5% < ± 1.5%
Inaccuracy (E%) Mid. Vol. Max. Vol.
< ± 3.5% < ± 1.8% < ± 1.1%
< ± 1.5% < ± 1.0% < ± 0.6%
Imprecision (CV%) Min. Vol Mid. Vol. Max. Vol. Qty/Case
< 2.0% < 1.5% < 0.6%
< 1.4% < 1.0% < 0.4%
< 0.4% < 0.3% < 0.2%
1 1 1
Performance values obtained with double distilled water at constant temperature (± 0.5°C) comprised between 20 and 25°C in accordance with EN ISO 8655.
Choice of feeding sources Supplied with a 90 cm silicone tubing, the instrument also fits optional feeding sources:
1 bottle 2 vial 3 syringe Great distribution flexibility Outlet nozzle fits any Luer Lock needles and cannulas. Optional PTFE cannula provides enhanced chemical resistance. Use 4- or 8-channel manifold when dispensing into microplates.
!CCESSORIES¬ Cat. No.
Description
W835012 W835008 W835014 W835016 W851369
Reservoir*, 30 mL, PTFE, Luer PTFE delivery cannula Manifold*, 4-channel, 20 mm spacing, Luer lock, stainless steel Manifold*, 8-channel, 9 mm spacing, Luer lock, stainless steel Work station 340 for 3 pipettes
Qty/Pack
1 1 1 1 1
*Autoclavable
See needles and cannulas on page 105. WHEATON
1.800.225.1437 (U.S. & Canada only) | +1.856.825.1100 | +1.856.825.1368 (F) | www.wheatonsci.com
122
123
0IPETTES ¬Socorex 4HE¬0ROlLLER©¬electro¬
• • • • • • • •
Powerful pump – fills 25 mL in 3 seconds Simple, fast operation Comfortable finger triggers Low battery light NiMH battery rechargeable during use Interchangeable protection membrane filter Stand suitable for bench or wall mounting One year warranty
This pipette controller fits any hand in a very comfortable way. The shape is ideal for working with glass or plastic pipettes within laminar flow hoods or microbiological safety cabinet. A powerful, yet quiet motor with a switch to set aspiration and dispensing speeds; this enables maximal working efficiency even with large pipetting volumes.
New
Cat. No.
Description
W851438 W851436 WI050950 W851444 W835022 W851454 W835024 W835026 W835028
Profiller™ electro 446 Spare bench stand for Profiller™ electro 446 Replacement 1.2V NiMH battery Fast charger and cord, USA plug Membrane filter, 0.45μm PTFE membrane filter, 0.2μm Silicone pipette holder Nose cone – white Alternative nose cones pink, violet, green (1 each)
Qty/Pack
1 1 1 1 5 5 1 3 3
Finger triggers Suction and dispensing are controlled through two ergonomically positioned finger triggers. They provide a comfortable grip with minimum activation effort.
Variable speed Switch enables selection of fast or slow aspiration and dispensing (with blow-out). Fast speed filling up to 25 mL in under 3 seconds. Gravity dispense mode is designed for use with ’To Deliver’ (TD) pipettes. Ordering information – Instrument Supplied with charger, two spare hydrophobic filters (0.45 μm and 0.2 μm), bench / wall stand and instruction manual.
Battery charge Instrument plug enables charging battery either in storage position or during use.
Convenient stand Suitable for bench or wall mounting, stand houses Profiller™ electro with or without a pipette in place. WHEATON
1.800.225.1437 (U.S. & Canada only) | +1.856.825.1100 | +1.856.825.1368 (F) | www.wheatonsci.com
0IPETTES ÂŹSocorex 0ROlLLERŠmanualÂŹÂŹ ÂŹ ÂŹ â&#x20AC;˘ â&#x20AC;˘ â&#x20AC;˘ â&#x20AC;˘ â&#x20AC;˘ â&#x20AC;˘ â&#x20AC;˘
Large capacity bulb Soft action lever button EfďŹ cient blow-out system PTFE protection membrane ďŹ lter Maintenance free Alternative color-coded nose cones One year warranty
Robust and easy to use, both models offer ergonomic shape and are lightweight. They provide smooth control in both aspirating and dispensing, using glass or plastic pipettes of volume up to 100 mL. Cat. No.
Description
W835000 W851434 W835022 W851454 W835024 W835026 W835028
ProďŹ llerâ&#x201E;˘ manual 435, egg style grey bulb ProďŹ llerâ&#x201E;˘ manual 436, ďŹ&#x201A;at shaped blue bulb PTFE membrane ďŹ lter, 0.45 Îźm PTFE membrane ďŹ lter, 0.2 Îźm Spare silicone pipette holder Replacement nose cone - white Alternative nose cones pink, violet, green (1 each)
Dear Partner in Science,
Qty/Pack
1 1 5 5 1 3 3
Protection ďŹ lter Interchangeable hydrophobic membrane ďŹ lter guarantees effective protection against airborne contamination during aspiration and dispensing. Color coding cones Nose cone can be changed for individual, laboratory or department identiďŹ cation. Choose among regular white or a bunch of three colors. Pipette holder Conical shape of silicone pipette holder tightly ďŹ ts graduated glass or plastic pipettes. Autoclavable.
Welcome to Socorex - a world of expertise in precision liquid handling. Having our products in the new Wheaton catalog will mean a lot to you when it comes to choosing the best liquid handling products for your applications. Pages 99-106 and 111-124 will guide you through a wide selection of innovative, ergonomic and safe instruments, engineered and designed with excellence in mind for the most demanding scientists. As an early leader, Socorex was the ďŹ rst manufacturer to obtain the EN ISO 9001 certiďŹ cation in this ďŹ eld, back in February 1991. This is only one of the many milestones having made total quality a company tradition and a cultural way-of-life for our management and staff members all together. Wheaton, our exclusive agent in the U.S., is well trained and equipped to provide professional advice and technical support on all the Socorex products. And, all the Socorex products can be purchased through your local laboratory distributor.
Squeezable bulb Simply squeeze large capacity silicone bulb for efďŹ cient aspiration. If additional aspiration is needed, it can be squeezed even during pipetting. 436 model has a distinct ďŹ&#x201A;at-shaped bulb.
Millions of CalibraÂŽ and AcuraÂŽ pipettors and other famous Socorex instrument brands in use throughout the world would mean little, be it for our ever-growing number of customers and their proven satisfaction. Thank you for your trust, we are committed to stay your quality partner in liquid handling.
Precise control Thumb lever button for left- and right-handed users to easily control both aspiration and dispensing speeds. Liquid blow-out Press large button to expel residual liquid when using blow-out type pipettes.
Sylvain Christen, CEO
WHEATON
1.800.225.1437 (U.S. & Canada only) | +1.856.825.1100 | +1.856.825.1368 (F) | www.wheatonsci.com
124
125
0UMPS
7HEATON¬0ERISTALTIC¬0UMP¬$ISPENSERS (ELP¬WITH¬9OUR¬-OST¬#OMPLEX¬&ILLING¬4ASKS Benefits of Peristaltic Pumps • • • • •
No contamination of fluid or the pump Sterile tubing means a sterile pump No tedious cleaning; fluid is confined to the tube Self-priming Pump chemical compatibility is limited to the chemical compatibility of the tubing
Our pumps allow multiple dispensing of larger volumes and they can be used in a variety of applications – filling plates & tubes, transferring reagents, dispensing additive, and general filling applications. The Wheaton pump dispenser can replace a variety of other pumps in your lab due to its versatility and range of features. It can dispense solvents ranging in viscosity from organic solvents to medium syrups. The liquid being dispensed remain in the tubing, allowing for quick, non-contaminating changes and easy clean up.
Peristaltic Pumps…How they work You can choose from two styles of Wheaton peristaltic pumps. These dispensing pumps can be used for filling applications in the laboratory and in the production area. When the pumps are in use, they are designed to prohibit contamination of the fluid or pump. To operate simply thread the tubing through the pump head and set your pump parameters. The pump is now ready to fill. The Wheaton pumps are easy to operate and cost effective. If you do need some help when setting and operating your pump, don’t hesitate to contact our Technical Service Department at 800.225.1437, or +1.856.225.1100. All pumps have a one year warranty.
The pump head squeezes the tubing. As the pump head continues its rotation, the tubing is able to recover its normal shape and size, drawing fluid into the tubing.
Fluid is being pushed along the tubing by the pump head.
The pump head finally forces the fluid out of the tubing.
0ERISTALTIC¬0UMP¬#OMPARISON¬ ¬ Omnispense® Plus
Model Pump
Unispense® μP
Electrical
100 - 240 VAC, 50 / 60 Hz, 37 watts
120 - 240 VAC, 50 / 60 Hz, 140 watts
Operating Speed
41 - 417 RPM
100 RPM
Available Tubing Sizes
2, 3, 6, and 8 mm ID
2, 3, 6, and 8 mm ID
1 - 2,400,000 mL 1.5 - 3,300,000 mL 2.2 - 10,500,000 mL 3.5 - 17,000,000 mL
— 1.0 - 900 mL 2.5 - 3,000 mL 4.0 - 5,000 mL
0.34 - 2.9 mL/sec 0.67 - 5.9 mL/sec 2.19 - 19.6 mL/sec 3.34 - 29.1 mL/sec
— 2.0 mL/sec 9.0 mL/sec 18 mL/sec
Accuracy
As high as ±1% midrange
As high as ±1% midrange
Delay Time
0.5 to 25.5 seconds in automatic mode
0.5 to 60 seconds in automatic mode
Dispense Ranges for Tubing Size: 2mm 3mm 6mm 8mm Flow Rate Ranges for Tubing Size: 2mm 3mm 6mm 8mm
Optional Pump Head Support Stack up to 3 pump heads Stacking Pump Head for 2.3 mm Wall Tubing Pump Head for 1.6 mm Wall Tubing Stacking Pump Head for 1.6 mm Wall Tubing 5-channel Pump Head for Small-Bore Tubing with Fixed Stops Weight
17 lb (7.7 kg)
11 lb (5 kg)
12.75 x 7.75 x 15 inches 32.4 x 19.7 x 38.1 cm
6.5 x 12.5 x 10 inches 16.5 x 32 x 25.4 cm
Dimensions with Pumphead (H x W x D)
WHEATON
1.800.225.1437 (U.S. & Canada only) | +1.856.825.1100 | +1.856.825.1368 (F) | www.wheatonsci.com
0UMPS
/MNISPENSE ¬0LUS¬0ERISTALTIC¬0UMP • • • • • • • • •
Built-in constant flow rate dispenser Multi-language display prompts External connection for remote start/stop Store up to 100 settings Lightweight design Attach up to 3 pump heads Self-prompting LCD display Conformance to UL, CSA and CE standards 1 year warranty
The Omnispense Plus is a premium automatic dispenser known for its versatility and variable speed. This pump features a reverse-flow option for various dispensing and aspirating operations. It is perfectly suited for accurately dispensing liquids ranging in viscosity from aqueous solutions to medium syrups. The built-in constant flow rate dispenser is fully programmable for delivery of a preset volume over a specific period of time with a display of the cumulative volume delivered. With its lightweight design, this pump can be easily moved between work stations. Integrated tubing support conveniently holds the tubing for filling containers. The hand held tubing holder with a start and stop switch is excellent for remote filling or for use when working in a fume hood. The pump can accommodate operating speeds up to 417 RPM. There are bright, selfprompting LCD displays in English, French, German, Italian, Portuguese, or Spanish. Pump is supplied with (1) 3 mm and (1) 6 mm ID Silicone tubing assembly. Each assembly is 5 feet (1.5 m) long with a borosilicate glass sinker on one end and a polypropylene nozzle on the other end. The silicone tubing assemblies are fully autoclavable.
126
Specifications Electrical ................................................... 100 - 240VAC, 50/60 Hz, 37 watts Operating Speed .......................................................................41 - 417 RPM Available Tubing Sizes .................................................... 2, 3, 6, and 8 mm ID Dispense Ranges for Tubing Size: 2mm ............................................................... 1 - 2,400,000 mL 3mm ............................................................ 1.5 - 3,300,000 mL 6mm .......................................................... 2.2 - 10,500,000 mL 8mm .......................................................... 3.5 - 17,000,000 mL Flow Rate Ranges for Tubing Size: 2mm ...............................................................0.34 - 2.9 mL/sec 3mm ...............................................................0.67 - 5.9 mL/sec 6mm .............................................................2.19 - 19.6 mL/sec 8mm .............................................................3.34 - 29.1 mL/sec Accuracy....................................................................As high as 1% midrange Delay Time ....................................................................... 0.5 to 25.5 seconds Optional Pump Head Support Stack up to 3 pump heads Stacking Pump Head for 2.3 mm Wall Tubing Pump Head for 1.6 mm Wall Tubing Stacking Pump Head for 1.6 mm Wall Tubing 5-channel Pump Head for Small-Bore Tubing with Fixed Stops Weight ....................................................................................... 17 lb (7.7 kg) Dimensions with Pumphead (H x W x D) .......................... 12.75 x 7.75 x 15 in 32.4 x 19.7 x 38.1 cm Cat. No.
Plug Style
Voltage
Qty/Case
W375020-A W375020-B W375020-C W375020-D W375020-F W375020-G W375020-J
North America Japan Continental Europe United Kingdom Australia/China Italy/Chile India
120 VAC 100 VAC 230 VAC 230 VAC 240 VAC 230 VAC 230 VAC
1 1 1 1 1 1 1
!CCESSORIES¬FOR¬/MNISPENSE ¬0LUS¬ Cat. No,
Description
W375022 W375023
Optional Stacking Pump Head for 2.3 mm Wall Tubing Optional Pump Head for 1.6 mm Wall Tubing (tubing not available from Wheaton) Optional Stacking Pump Head for 1.6 mm Wall Tubing (tubing not available from Wheaton) Optional 5-Channel Pump Head for use with Small Bore Tubing with fixed stops (tubing not available from Wheaton)
W375024 W375025
Qty/Case
1 1 1 1
For more information on plug styles see page 188.
&OOTSWITCH Utilize the convenience of hands-free pump operation by installing the optional footswitch for the Omnispense Plus. This footswitch enables better control with its start and stop feature. This footswitch can remotely start and/or stop the dispense cycle when used with the Ominspense® Plus.
Hand held tubing holder
Cat. No
Description
Qty/Case
I050694
Footswitch
1
For a list of pump tubing and other accessories see pages 127-128.
WHEATON
1.800.225.1437 (U.S. & Canada only) | +1.856.825.1100 | +1.856.825.1368 (F) | www.wheatonsci.com
127
0UMPS 0UMP¬4UBING¬ ¬!CCESSORIES Tubing Compatibility Viton®
Silicone
5NISPENSE ¬«0¬-ICROPROCESSOR¬ #ONTROLLED¬$ISPENSER¬ • • • • •
Acids No Bases No Organic Solvents No Sterile Fluids Yes Concentrated Solvents No Oils No Low Temperature Yes Autoclaving Yes Gas Permeability High Other Characteristics Excellent biocompatibility
Yes Yes Yes Yes Yes Yes Yes No Low Extremely chemical resistant
Accuracy as high as ±1% midrange Operating speed fixed at 100 RPM Compact size; easily fits on bench-tops, in flow-hoods and cabinets Self-prompting LCD display 1 year warranty
The Unispense μP is an accurate “easy-2-use” peristaltic pump that accommodates liquids ranging from aqueous solutions to medium syrups. With its small footprint, this pump fits well on bench-tops, in flow hoods and cabinets. Fluid is confined to the tube, therefore tedious cleaning is needless. Pump chemical compatibility is limited to the chemical compatibility of the tubing. Set-up parameters are stored in memory for easy recall. The LCD display and one-step volume calibration ensure quick and easy setup. The pump operating speed is approximately 100 RPM. Pump is supplied with (1) 3 mm and (1) 6 mm ID Silicone tubing assembly. Each assembly is 5 feet (1.5 m) long with a borosilicate glass sinker on one end and a polypropylene nozzle on the other end. The silicone tubing assemblies are fully autoclavable. Specifications Electrical ................................................120 - 240 VAC, 50 / 60 Hz, 140 watts Operating Speed .............................................................................. 100 RPM Available Tubing Sizes......................................................... 3, 6, and 8 mm ID Dispense Ranges for Tubing Size: 3mm ...................................................................... 1.0 - 900 mL 6mm ................................................................... 2.5 - 3,000 mL 8mm ................................................................... 4.0 - 5,000 mL Flow Rate Ranges for Tubing Size: 3mm ......................................................................... 2.0 mL/sec 6mm ......................................................................... 9.0 mL/sec 8mm .......................................................................... 18 mL/sec Accuracy ................................................................. As high as ±1% midrange Delay Time ..............................................0.5 to 60 seconds in automatic mode Weight...........................................................................................11 lb (5 kg) Dimensions with Pumphead (H x W x D) .....................6.5 x 12.5 x 10 inches ......................................................................................16.5 x 32 x 25.4 cm Cat. No.
Voltage
4UBING¬!SSEMBLY The tubing assembly consists of 1.5 m (5-foot) section silicone or Viton® tubing with a wall thickness of 2.3 mm and borosilicate glass sinker on one end and a polypropylene delivery nozzle on the other end. Cat. No.
Description
Qty/Case
Silicone Tubing Assembly, 2.3 mm wall thickness 374310 374311 374313 374314
2 mm ID, 5-ft section (1.5 m) 3 mm ID, 5-ft section (1.5 m) 6 mm ID, 5-ft section (1.5 m) 8 mm ID, 5-ft section (1.5 m)
1 1 1 1
Viton® Tubing Assembly, 2.3 mm wall thickness 374315 374316 374318 374319
2 mm ID, 5-ft section (1.5 m) 3 mm ID, 5-ft section (1.5 m) 6 mm ID, 5-ft section (1.5 m) 8 mm ID, 5-ft section (1.5 m)
1 1 1 1
Qty/Case
Unispense® with Standard Pump Head 374301 374302
110 VAC 220 VAC
1 1
4UBING ¬"ULK¬ Cat. No.
Description
Qty/Case
Silicone Tubing, 2.3 mm wall thickness 374304 374305 374306 374308
&OOTSWITCH
2 mm ID, 25 ft (7.62 m) 3 mm ID, 25 ft (7.62 m) 6 mm ID, 25 ft (7.62 m) 8 mm ID, 25 ft (7.62 m)
1 1 1 1
Viton® Tubing*, 2.3 mm wall thickness
Utilize the convenience of hands free pump operation by installing the optional footswitch for the Unispense. This footswitch enables better control with its start and stop feature. This footswitch can remotely start and/or stop the dispense cycle when used with the Unispense® Pump Dispenser. Cat. No
Description
Qty/Case
I050694
Footswitch
1
WHEATON
I054342 I054343 I054346 I054348
2 mm ID, 25 ft (7.62 m) 3 mm ID, 25 ft (7.62 m) 6 mm ID, 25 ft (7.62 m) 8 mm ID, 25 ft (7.62 m)
*Viton® tubing is for use with caustic reagents, organic solvents and scintillation cocktails. Viton tubing is sold in 1 foot (0.3 m) increments.
1.800.225.1437 (U.S. & Canada only) | +1.856.825.1100 | +1.856.825.1368 (F) | www.wheatonsci.com
1 1 1 1
2OLLERÂŹ2ACKS
Glass Sinker
Hose Barb/Luer Adapter
Polypropylene Nozzle
2OLLERÂŹ#ULTUREÂŹ!PPARATUS
4UBINGÂŹ!CCESSORIES Cat. No.
Description
374320 374321 374322 374324 374326 374328
Small Glass Sinker (ďŹ ts 2 and 3 mm ID tubing) Large Glass Sinker (ďŹ ts 6 and 8 mm ID tubing) Hose Barb/Luer Adapter for attaching manifold (2 mm and 3 mm) 2 and 3 mm Polypropylene Nozzle 6 mm Polypropylene Nozzle 8 mm Polypropylene Nozzle
Qty/Case
6 6 1 6 6 6
For a complete selection of Roller Culture Apparatus see pages 58 - 63 of the Cell Culture section. For Glass Roller Bottles, see page 15 of the Bottle section. â&#x20AC;˘ Bench Top Rollers page 58 â&#x20AC;˘ Incubators page 64 â&#x20AC;˘ R2P pages 62 - 63
4UBINGÂŹ3UPPORTÂŹ3TAND Optional tubing support conveniently holds the tubing in place for ďŹ lling operations. Cat. No
Description
I054106
Tubing Support Stand
Cat. No. 374325
Qty/Case
1
Cat. No. 374330
) 6 ÂŹ!DDITIVEÂŹ0UMPÂŹ#HAMBERÂŹ!SSEMBLIES â&#x20AC;˘ For use with UnispenseÂŽ and OmnispenseÂŽ Plus Pump Dispensers
Cat. No. 374325 is comprised of silicone tubing with female Luer and male Luer lock ďŹ tting on opposing ends. Sterile, individually packaged. Length: 42â&#x20AC;? (106.7 cm). (Vented spike not included). Cat. No. 374330 is comprised of high volume silicone and PVC tubing with vented spike and drip chamber and male Luer lock ďŹ tting on opposing ends. Sterile, individually packaged. Length: 5 ft. (1.5 m). Cat. No.
Description
374325 374330
3 mm I.V. Additive Pump Chamber Assembly 6 mm I.V. Additive Pump Chamber Assembly
Qty/Case
WHEATON
10 10
1.800.225.1437 (U.S. & Canada only) | +1.856.825.1100 | +1.856.825.1368 (F) | www.wheatonsci.com
128
129
3AMPLE¬#OLLECTION
3AMPLE¬#OLLECTION¬$EVICES¬
W
heaton offers a variety of sampling devices for industrial and QC applications, environmental compliance hazardous/toxic materials evaluation and site evaluation/remediation work. Sampling devices are offered for liquids, solids, sludges, earth/soil, water, etc. They are ideal for sampling from barrels, drums, water reservoirs, sub-surface effluents and are efficient and easy to use. Most of Wheaton’s sampling devices help meet EPA standards and regulations.
"OMB¬3AMPLER • Ideal for sub-surface liquid sampling • Stainless steel • 500 mL capacity
#OLIWASA¬3AMPLER ¬'LASS¬ • • • •
These units are constructed of corrosion resistant Type 302 stainless steel. A weighted plunger with a Viton® “O” ring seals the reservoir chamber at the bottom. Use a cable to lower sampler to desired depth. A negligible amount of liquid will enter during descent. Pull second cable to operate the sampling valve and release to reseal the chamber. This unit is not supplied with cables. We recommend use of a cable that can support 50 pounds or more and is made from stainless or Teflon® coated stainless steel. Cat. No.
Capacity (mL)
Dia x Length
885200
500
2.5 x 10 in (6.35 x 25.4 cm)
Qty/Case
1
Easy to use Disposable or reusable units available Liquid-tight Teflon® seal eliminates sample leakage Teflon® seal design permits sampling to within 1/2” of drum bottom
Glass Coliwasa Samplers are used to collect composite liquid samples from top to bottom in drums, tanks and reservoirs. After a sample has been collected, lower and press lightly on the inner tube, which positively seats the Teflon® seal, locking the sample column into place. This unit has a tapered bottom with an approximate diameter opening of 1/2”, (1.3 cm) and a sample capacity of 200 mL. Prescored samplers make disposal easier. Dimensions: Diameter 7/8” x Length 42”, (2.25 cm x 106.5 cm) Cat. No.
Description
Material
Qty/Case
Prescored
Soda-Lime Glass
12
Unscored Prescored
Borosilicate Glass Borosilicate Glass
12 12
Teflon®
10
Disposable Unit 885220
Reusable Unit 885230 885231
Replacement Seals 885232
WHEATON
Replacement Seals
1.800.225.1437 (U.S. & Canada only) | +1.856.825.1100 | +1.856.825.1368 (F) | www.wheatonsci.com
3AMPLE¬#OLLECTION
130
$RUM¬4HIEVES¬
#OLIWASA ¬4RUMPET¬
• Disposable Glass Units • Open ended
• Use for sampling sludge or semi-solid material • Disposable glass
This disposable soda-lime glass Coliwasa is used to sample sludge or semi-solid material. The rigidity of the glass makes it suitable for boring through semi-solid sludge-type materials. The tight Teflon® seal keeps in liquid and sludge material. The outer tube is 40 inches (101.6 cm) long. Cat. No.
Description
885235 885236
200 mL capacity Replacement Inner Rod with Teflon® Seal
Qty/Case
12 12
These soda-lime glass units are 43” long and can be easily broken for quick disposal. To use simply insert one end of the drum thief into a drum and hold a finger over the opening on the other end. This will trap liquid in the tube. Carefully remove the drum thief and empty the contents into a testing container. Drum thieves are ideal for quick and easy sample retrieval. Cat. No.
Approx. Capacity (mL)
Dia (mm)
885300 885302 885303
25 75 150
7.5 12 18
Qty/Case
100 24 24
% :¬3AMPLER • Ideal for sampling unknowns from drums and tanks • Manufactured from polypropylene • Provided with 125 mL sample bottle
The E-Z Sampler is an efficient and time saving method of sampling unknowns from drums and tanks. Constructed of chemically resistant polypropylene, the E-Z Sampler has a 39" (100 cm) head/shaft assembly and is supplied with a 125 mL borosilicate glass bottle with a Teflon® lined cap. The filling ports are located above the bottle to ensure that it is completely filled to reduce the possibility of air entrapment. The bottle has a 33-430 screw thread finish.
#OLIWASA ¬2EUSABLE¬ • Clear PVC • Positive seal for sample retention • Sampling can be achieved up to 20 feet
The uniquely designed top spin bar and bottom valve plate mechanism provides a positive seal for sample retention along with greater control for releasing the sample. The modular design also adds flexibility by enabling the connection of several sections to form a longer sampling unit up to 20 feet (610 cm). To use the Coliwasa, simply turn the bar on the top of the handle, insert slowly into the drum to collect liquid in the column, pull the top handle to seat the bottom valve plate, and spin the top handle closed, trapping the liquid in the sampler. This Coliwasa comes with a 48” long cleaning brush.
Cat. No.
Description
885020 885025 240480
Complete Unit with bottle 125 mL Bottle, with Cap Replacement Cap
Description
Approx. Volume (mL)
• Ideal for sampling from spillways, docks and other sub surfaces • No need to physically enter the sample area • Eliminates surface contamination • Helps meet EPA requirements for water and wastewater sampling • Lightweight construction
Qty/Case
Coliwasa Unit 885250 885252
4 ft. (122 cm) Coliwasa Unit 6 ft. (183 cm) Coliwasa Unit
760 1100
1 1
760 1100
1 1
— — —
1 1 1
Extension and Connector 885253 885255
4 ft. (122 cm) Extension and Connector 6 ft. (183 cm) Extension and Connector
Replacement Shaft 885256 885257 885258
Replacement 4 ft. (122 cm) PVC Shaft for 885250 Replacement 6 ft. (183 cm) PVC Shaft for 885252 Bottom Plate and SS Nut
WHEATON
1 12 100
3UB¬3URFACE¬¬ 'RAB¬3AMPLER ¬)¬
Dimensions (ID x OD): 1 3/8 x 1 5/8 in (3.5 x 4.12 cm). Cat. No.
Qty/Case
This unit affords you easy access to samples from spillways, docks, etc., without having to physically enter the sample areas. It is constructed of 72” x 3/4” (183 x 2 cm) square aluminum tubing with a golden anodine finish. It comes with a 1000 mL narrow-mouth sample bottle with a PTFE-lined cap and clamps for large and small bottles. Cat. No.
Description
990250 990477 240481
Sub-Surface Grab Sampler I Replacement Sample Bottle, 1000 mL, 38-430 Black Phenolic Replacement Cap, 38-430, with PTFE liner
1.800.225.1437 (U.S. & Canada only) | +1.856.825.1100 | +1.856.825.1368 (F) | www.wheatonsci.com
Qty/Case
1 1 100
131
3AMPLE¬#OLLECTION
3UB¬3URFACE¬'RAB¬3AMPLER ¬))L¬ • • • •
Use when sampling hazardous and corrosive materials, as well as wastewater Chemically resistant stainless steel and polypropylene construction Wide mouth accepts light sludges and slurries Modular design uses 6’ add-on sections up to 24’ in length
This unit works on the same principle as the Grab Sampler II. The Grab Sampler III fits wide-mouth bottles with a 70-400 screw thread finish. A displacement plunger allows the collection of samples in a 1000 mL bottle with approximately 1 inch of head space between the sample and the underside of the bottle closure. The Grab Sampler III includes a safety-coated 1000 mL bottle and a green urea cap with a Teflon® liner. An extension kit (990471, sold separately) includes a 6 feet stainless steel extension shaft, coupling and connecting cable. To use it, you pull a cable that lifts a spring-loaded plunger, allowing liquid to enter through four 5/8” x 1-1/2” slots. Release the cable when the bottle is full to reset the plunger. Cat. No.
Description
990470 990471 216641 239244
Sub Surface Grab Sampler 6 ft. (183 cm) Extension Kit Safety Coated Sample Bottle, 32 oz., 70-400 (without cap) Polypropylene Replacement Cap, 70-400, with PTFE liner
Qty/Case
1 1 12 48
¬ 3AMPLE¬"OTTLES 3UB¬3URFACE¬'RAB¬3AMPLER ¬))¬ • Excellent for accessing fluid flow in deep manholes and hard to reach sub-surface sampling areas • Helps meet EPA requirements for water and waste water sampling • Available in lengths up to 18 ft. (5.5 m)
Each sampler consists of an inert polypropylene head with stainless steel fittings and an aluminum pole assembly with a golden alodine finish. It comes with a 1000 mL narrow-mouth sample bottle with a PTFE-lined cap. To use it, screw a sample bottle into the head and lower to the desired depth. Pull the cable at the top of the handle which will lift a spring-loaded plunger from the bottle opening, allowing liquid to enter through four 5/8” diameter holes. Release the cable when the bottle is full to reseat the plunger. Cat. No.
Description
990350 990400 990450 990477 240481
6 ft. (183 cm) Sub Surface Grab Sampler II 12 ft. (366 cm) Sub Surface Grab Sampler II 18 ft (549 cm) Sub Surface Grab Sampler II Replacement Sample Bottle, 1000 mL, 38-430 Black Phenolic Replacement Cap, 38-430, with PTFE liner
Qty/Case
1 1 1 1 100
3AMPLE¬"OTTLE ¬.ARROW¬-OUTH • • • •
For use with Sub Surface Grab Sampler I & II 1000 mL narrow mouth borosilicate glass bottle 38-430 screw cap with PTFE liner Autoclavable
This bottle is used with the Sub Surface Grab Samplers I and II and has a 38-430 screw thread finish with a PTFE lined cap. The bottle has a hand grip for easy handling. Cat. No.
Description
990477
1000 mL Bottle with Cap
See replacement caps on page 13. WHEATON
1.800.225.1437 (U.S. & Canada only) | +1.856.825.1100 | +1.856.825.1368 (F) | www.wheatonsci.com
Qty/Case
1
3AMPLE¬#OLLECTION 3AMPLE¬#OLLECTION¬#ONTAINERS For a complete selection of sample collection containers see the Bottle Section on pages 3-30, and the Vial section on pages 139-154. • Plastic Bottles pages 22-30
3AMPLE¬"OTTLE ¬7IDE¬-OUTH
• EPA Vials page 142
• • • •
• Vials in Lab File page 150
For use with Sub Surface Grab Sampler III 1000 mL wide mouth borosilicate glass bottle 70-400 screw cap with PTFE liner Autoclavable
These wide mouth sample bottles can be repeatedly autoclaved and come with PTFE-lined caps. Cat. No.
Description
990476
1000 mL Bottle with Cap
Qty/Case
1
$RUM¬/PENER This opener can be used with hazardous materials. It is cast from lightweight, durable aluminum alloy and features a quarter-turn opening action.
Cat. No.
Description
885295
Drum Opener
Qty/Case
1
3COOP ¬3TAINLESS¬3TEEL¬
%NVIRONMENTAL¬4ESTING¬!PPARATUS See the Chemistry Glassware Section on pages 65 - 82 for environmental testing apparatus. • Arsine Generators page 67 • Cyanide Distillation Kits pages 67 - 68 • Diazomethane Generators pages 68
This scoop is made from 302 stainless steel and is ideal for sampling powders, slurries, soils, etc.
• Dessicators pages 73-74
Dimensions: Overall length is 9-1/2" (24 cm); the bowl depth is 1" (2.54 cm). Cat. No.
Description
885540
Scoop
• Evaporative Concentrators pages 68 - 69
Qty/Case
4
• Filtration Apparatus pages 75 - 81 • Imhoff Cone for Solid Determination page 82
4RIER¬3AMPLER • Used for extracting a plug from material • Manufactured from 304 stainless steel
This sampler is made from 304 stainless steel and is tapered for extracting a plug of material from solids (soil, clay) or semi-solids (grease, sludge). Dimension: Length 7" (17.75 cm).
Cat. No.
Description
885380
Trier Sample
WHEATON
Qty/Case
1
1.800.225.1437 (U.S. & Canada only) | +1.856.825.1100 | +1.856.825.1368 (F) | www.wheatonsci.com
132
133
3CI,UTIONS ¬Customized Services
W
hile our heritage is in manufacturing quality products, today we provide services that streamline your operations. It’s easier than ever to get your laboratory products customized the way you need them.
We have integrated a suite of services that you can select from to ensure you obtain the right solution. Each customer is different and each project unique-so each solution is modified to meet individual needs and requirements. Quality products are what we are known for and now with SciLutions®, we bring a whole new level of services to your doorstep.
#USTOMIZATION
2ELIABILITY
When needed, an expert team of corporate engineers, R&D professionals and integration specialists will work collaboratively with you to achieve a solution that meets your needs.
SciLutions is about simplifying your supply chain and optimizing your operations. We can work collaboratively on long term solutions and ensure they are achieved. It’s not about one order or one delivery. It’s about ensuring our products arrive ready to be used, exactly the way you want them.
#OORDINATION We take care of the details. We will handle all of the in-between steps to ensure your process is smooth and efficient. Most of all, we want to meet your particular requirements and specifications from the beginning to the end.
-ANUFACTURING¬0ROCESSES • Extrusion Blow Molding • Injection Blow Molding • Injection Molding • Injection Stretch Blow Molding • Tubular Vial Conversion • Molded Glass
#ONTAINER¬-ATERIALS
#USTOM¬#ONTAINERS • • • • •
Made to order Engineering and design support Custom packaging Custom cut glass tubing and rods Artwork/decal application
• • • • • • •
High Density Polyethylene (HDPE) Low Density Polyethylene (LDPE) Polyethylene Terephthalate (PET) Polypropylene (PP) Cyclo-Olefin Copolymer (COC) Type I Borosilicate Glass Type IIl Soda-Lime Glass
Request a specific packaging method or a completely unique container based on your specific requirements for dimension, shape, and material. Need a custom glass vial? We’ve been producing specialty vials like V Vials® and the E-Z Ex-Traction® high recovery vials for years following the precise instructions of our customers.
"AR¬#ODING • • • •
Uniquely numbered and bar coded to fit your application 100% scannable Wide range of symbologies Packaged and sequentially numbered to your specifications
3YMBOLOGIES • • • • • •
Code 39 Code 128 Interleaved 2 of 5 Linear Bar Codes 2 Dimensional (2D) Data Matrix
-ATERIALS¬
Bar coding can help you identify and track anything in your lab or compound storage facility. Increase the speed of data collection while eliminating errors and ultimately reducing costs. It is imperative that bar codes are read correctly every time, stay adhered to the container, and are durable enough to withstand severe environments.
• Laser: Direct product marked • Ceramic: Imaged ceramic label applied and fired • Photo Imaging: Ultra high-density graphically perfect images • Flexographic: Ink based static printing and label converting • Digital: Full process color 1800 dpi, variable data
We utilize a variety of symbologies and materials to provide unique identification solutions for biotech, pharmaceutical, and compound storage facilities. Bar coding techniques are available from simple pressure sensitive labels to direct marked containers. WHEATON
1.800.225.1437 (U.S. & Canada only) | +1.856.825.1100 | +1.856.825.1368 (F) | www.wheatonsci.com
3CI,UTIONS ¬Customized Services
134
,IST¬OF¬#ERTIlCATIONS • • • • • • • •
#RITICAL¬#LEANING • • • • • •
Certificate of Analysis, TOC Certificate of Analysis, Endotoxin Certificate of Analysis, Particles Certificate of Processing Certificate of Sterility/USP Certification of Compliance Selected Testing by USP Methods Materials Certification
0ACKAGING¬#ONlGURATIONS
Low particulate cleaning Depyrogenation Chemical cleaning for trace analysis Sterilization (E-beam, Gamma Irradiation, Autoclaving) Water for Injection (WFI) and USP rinses Total Organic Carbon (TOC) process
Depending on your application, you may require any number of “levels of clean.” To ensure we can accommodate any request, we employ the most sophisticated methods to remove trace organics, trace inorganics, volatile organics, and organic carbon residues.
• Individual or multi-unit cleanroom bags • Single or double bagged • Autoclaved bagging in cleanroom bags (closures only) • Autoclaved bagging (single, double, or triple bagged)
We use USP purified water, HEPA filtering, and package items in certified class 100/10 cleanrooms. In addition, we can deliver our glass containers and accessories with endotoxin levels of less than 0.06 EU/mL with full documentation and certification.
3URFACE¬4REATMENT !PPLICATIONS • Trace organic analysis • Storage of materials prone to adhering to glass • Extraction glassware
Surface treatment refers to a process by which the inside of a container is deactivated via silanization or siliconization. The coating provides a protective barrier between the contents and the glass, eliminating active sites on the glass that could potentially react with its contents. We treat vials and vial inserts using vapor phase deposition for silanization and siliconization coating to lubricate and protect against alkalinization. This service is ideal for serum vials and pH sensitive storage. Certificates of conformance are always available based on customer needs and requirements.
4ARING • Pre-weighed containers • Traceability documentation • Accuracy to ±0.2 milligrams
Part of the SciLutions® program is to provide you with pre-weighed containers. Taring ensures that the amount of material in the container can be accurately measured at any given time. Wheaton offers this service, eliminating the extra step of pre-weighing in the lab. Weights for each container are recorded to the accuracy of ±0.2 milligrams. The results are summarized in the form of a spreadsheet allowing for each and every container to be fully traceable.
WHEATON
1.800.225.1437 (U.S. & Canada only) | +1.856.825.1100 | +1.856.825.1368 (F) | www.wheatonsci.com
135
3TAININGÂŹ7ARE
34!).).'ÂŹ ÂŹ-/5.4).'ÂŹ ÂŹ-)#2/3#/09
W
heaton offers a variety of staining dishes and Coplin jars suitable for various histology staining. Routine staining is performed to give contrast to the tissue being examined, as without staining it is very difďŹ cult to see differences in cell morphology. Hematoxylin and eosin (abbreviated H&E) are the most commonly used stains in histology and histopathology. Hematoxylin colors nuclei blue, eosin colors the cytoplasm pink. To see the tissue under a microscope, the sections are stained with one or more pigments. There are hundreds of various other techniques which have been used to selectively stain cells and cellular components. Other compounds used to color tissue sections include Safranin, Oil Red O, Congo red, Fast Green FCF, Silver salts and numerous natural and artiďŹ cial dyes that were usually originated from the development dyes for the textile industry. Histochemistry refers to the science of using chemical reactions between laboratory chemicals and components within tissue. A commonly performed histochemical technique is the Perls Prussian blue reaction, used to demonstrate iron deposits in diseases like Hemochromatosis.
#OMMONÂŹ(ISTOLOGYÂŹ3TAINS Stain
Common use
Hematoxylin
Toluidine blue Massonâ&#x20AC;&#x2122;s trichrome stain
General staining when paired with Eosin General staining when paired with Hematoxylin General staining Connective tissue
Malloryâ&#x20AC;&#x2122;s trichrome stain
Connective tissue
Weigertâ&#x20AC;&#x2122;s elastic stain Heidenhainsâ&#x20AC;&#x2122;azan trichrome stain
Elastic ďŹ bers Distinguishing cells from extracellular components
Silver stain Wrightâ&#x20AC;&#x2122;s stain
Reticular ďŹ bers, Nerve ďŹ bers Blood cells
Orcein stain
Elastic ďŹ bres
Periodic (PAS) acid-Schiff stain
Basement Membrane, Localising carbohydrates
Eosin
Histology samples have often been examined by radioactive techniques. In historadiography a slide (sometimes stained histochemically) is X-rayed. More commonly, autoradiography is used to visualize the locations to which a radioactive substance has been transported within the body; such are cells in S phase (undergoing DNA replication) which incorporate tritiated thymidine, or sites to which radio labeled
nucleic acid probes bind in in situ hybridization. For autoradiography on a microscopic level the slide is typically dipped into liquid nuclear tract emulsion, which dries to form the exposure ďŹ lm. Individual silver grains in the ďŹ lm are visualized with dark ďŹ eld microscopy. Recently, antibodies are used to speciďŹ cally visualize proteins, carbohydrates and lipids: this is called immunohistochemistry, or when the stain is a ďŹ&#x201A;uorescent molecule, immunoďŹ&#x201A;uorescence. This technique has greatly increased the ability to identify categories of cells under a microscope. Other advanced techniques can be combined with this, such as nonradioactive in situ hybridization to identify speciďŹ c DNA or RNA molecules with ďŹ&#x201A;uorescent probes or tags that can be used for immunoďŹ&#x201A;uorescence and enzyme-linked ďŹ&#x201A;uorescence ampliďŹ cation (especially alkaline phosphatase and tyramide signal ampliďŹ cation). Fluorescence microscopy and confocal microscopy are used to detect ďŹ&#x201A;uorescent signals with good intracellular detail. Digital cameras are increasingly used to capture histological and histopathological images. Wheaton staining dishes, covers, and racks are manufactured from soda-lime glass that resists staining from Eosin or Hematoxylin. Staining dishes are available in many conďŹ gurations to accommodate up to 50 slides, with various glass and stainless steel racks. Coplin jars can be used for pre-staining with an alcohol buffer. Slides are held vertically for easy manipulation. A Coplin jar can also serve as a preparation chamber for micro-thin-layer chromatography.
Nucleus
Cytoplasm
Red Blood Cell (RBC)
Collagen Fibers
Blue
N/A
N/A
N/A
N/A
Pink
Orange/Red
Pink
Blue Black
Blue Red/Pink
Blue Red
Blue Blue/Green
Red
Pale Red
Orange
Deep Blue
Blue/Black Red/Purple
N/A Pink
N/A Red
N/A Blue
N/A Bluish/Purple
N/A Bluish/Gray
N/A Red/Pink
Brown/Black N/A
Deep Blue
N/A
Bright Red
Pink
Blue
N/A
N/A
Pink
SpeciďŹ cally stains
Nucleic acids - Blue blue eER (ergastoplasm) - Blue Elastic ďŹ bers - Pink reticular ďŹ bers - Pink Mast cells granules - Purple Cartilage - Blue/green Muscle ďŹ bers - Red Keratin - Orange Cartilage - Blue Bone matrix - Deep Blue Muscle ďŹ bers - Red Elastic ďŹ bers - Blue/Black Muscle ďŹ bers - Red Cartilage - Blue Bone matrix - Blue Reticular & Nerve Fibers - Brown/Black Neutrophil granules - Purple/Pink Eosinophil granules - Bright Red/Orange Basophil granules - Deep Purple/Violet Platelet granules - Red/Purple Elastic ďŹ bres - Dark Brown Mast cells granules - Purple Smooth Muscle - Light Blue Glycogen and other Carbohydrates - Magenta
Reference from: Michael H. Ross, Wojciech Pawlina, (2006). Histology: A Text and Atlas. Hagerstown, MD: Lippincott Williams & Wilkins. ISBN 0-7817-5056-3.
WHEATON
1.800.225.1437 (U.S. & Canada only) | +1.856.825.1100 | +1.856.825.1368 (F) | www.wheatonsci.com
3TAINING¬7ARE
136
3TAINING¬$ISH ¬10-20 Slide Unit
3TAINING¬$ISH ¬50-Slide Unit
This 20-slide unit is the standard for manual staining procedures. The removable glass slide rack has an open bottom to facilitate rapid immersion and drainage, reducing carryover. The rack holds 10 single slides, 19 slides arranged alternately straight across and diagonally, or 20 slides back-to-back of standard size: 3” x 1” (75 x 25 mm), 3” x 1-1/2 “ (75 x 38 mm) and 3” x 2” (75 x 51 mm) sizes. Manufactured from soda-lime glass. Approximate inside dimensions: 95 mm L x 76 mm W x 64 mm D.
This slotted rack holds 50 microscope slides, sizes 3” x 1” (75 mm x 25 mm), 3” x 1-1/2” (75 mm x 38 mm), and 3” x 2” (75 mm x 51 mm). The rack is made of non-tarnishable stainless steel that is resistant to staining solutions. The handle is permanently attached, but hinged to permit closure of the dish and easy insertion and removal of the microscope slides. The dish is manufactured from soda-lime glass. Approximate inside dimensions: 185 mm L x 88 mm W x 68 mm D
Cat. No.
Description
Qty/Case
Cat. No.
Description
900200 900201 900202 900203 900204 900205
Complete (Dish, Cover, Rack, Handle) Dish Cover Dish and Cover Glass Slide Rack Handle
6 3 3 3 3 6
900400 900401 900402 900403 900404
Complete (Dish, Cover, and Rack) Dish Cover Dish and cover 50-Slide Stainless Steel Rack, with Handle Attached
Qty/Case
6 3 3 3 3
3TAINING¬$ISH ¬8-16 Slide Unit • Fits 8 single slides or 16 slides back-to-back • Used as staining dish or TLC developing chamber • Includes glass lid
This Hellendahl-type dish can be used for staining or as a TLC developing chamber. It holds 8 individual 3” x 1” (75 mm x 25 mm) slides or, if necessary, 16 slides back-to-back. Manufactured from soda-lime glass. Approximate inside dimensions (mm): 76 L x 25 W x 75 D
3TAINING¬$ISH ¬10-20 Slide Unit
Cat. No.
Description
900630
Staining Dish
Qty/Case
6
Designed for staining 3” x 1” (75 mm x 25 mm) microscope slides. Holds 10 single slides, or 19 slides arranged alternately straight across and diagonally, or 20 slides back to back. Approximate inside dimensions: 80 mm L x 55 mm W x 35 mm D. Cat. No.
Description
900170
Staining Dish, with Cover
Qty/Case
6
#OLUMBIA¬*AR¬FOR¬#OVER¬3LIPS • Unit holds 4 cover slips • Polyproplene screw cap with PTFE coated PE liner
3TAINING¬$ISH ¬16-40 Slide Unit
These staining jars hold up to 4 cover slips 17-23 mm wide, and up to 30 mm long. Longer cover slips can be accommodated if the cap is removed. The jar includes a 43-400 white polypropylene screw cap with a PTFE coated polyethylene liner. Made from soda-lime glass, the jar is chemical resistant. In addition to staining applications, Columbia Jars can be used for cleaning cover slips, as well as coating them with materials such as poly-lysine or silane.
These mix-and-match components offer greater flexibility in meeting your requirements. This staining dish accommodates 16, 20 and 30 slide racks. It holds slides sizes 3” x 1” (75 mm x 25 mm), 3” x 1-1/2 “ (75 mm x 38 mm), and 3” x 2” (75 mm x 51 mm). Manufactured from soda-lime glass. Approximate inside dimensions: 118 mm L x 88 mm W x 70 mm D. Cat. No.
Description
900303 900301 900302 900234 900254 900304
Dish and Cover Dish Cover 30-Slide Rack Stainless Steel with hinged handle (16-32) Slide Rack, Glass (20-40) Slide Rack, Glass
WHEATON
Qty/Case
6 3 3 3 3 3
Cat. No.
Description
W900180 W900180-6
Columbia Jar & Cap Columbia Jar & Cap
1.800.225.1437 (U.S. & Canada only) | +1.856.825.1100 | +1.856.825.1368 (F) | www.wheatonsci.com
Qty/Case
1 6
137
3TAININGÂŹ7ARE #OPLINÂŹ3TAININGÂŹ*AR ÂŹÂŹ 5-10 Slide Unit
3TAININGÂŹ*AR ÂŹ8-10 Slide Unit â&#x20AC;˘ Fits 8 single slides or 16 slides back-to-back â&#x20AC;˘ Wide top makes transferring slides convenient â&#x20AC;˘ Includes glass lid
â&#x20AC;˘ Holds 10 slides â&#x20AC;˘ Polypropylene screw cap â&#x20AC;˘ 55 mL capacity
This unit holds ten 3â&#x20AC;? x 1â&#x20AC;? (75 mm x 25 mm) slides, which extend above the opening so you can manipulate them without using forceps. The screw cap is made of linerless white polypropylene to reduce solvent evaporation and spills during storage. The unit has a rectangular base and holds approximately 55 mL. Manufactured from soda-lime glass. Approximate inside dimensions: 26 mm L x 26 mm W x 70 mm D. Cat. No.
Description
900520 900522
Coplin Jar with PP Screw Cap Replacement Cap, 58-400
This jarâ&#x20AC;&#x2122;s wide top is designed for convenience in transferring slides, making it especially suitable for staining slides that are inscribed on one end. The jar holds 8 single 3â&#x20AC;? x 1â&#x20AC;? (75 mm x 25 mm) slides vertically or 16 slides back-to-back. Manufactured from soda-lime glass. Approximate inside dimensions (mm): 42 L x 26 W x 85 D. Cat. No.
Description
900620
Staining Jar with Cover
Qty/Case
Qty/Case
3LIDEÂŹ'RIPÂŹ
6 6
Polypropylene grip allows for easy and safe transfer of ďŹ ve slides to other containers for staining. It ďŹ ts into Wheaton Coplin staining jars.
#OPLINÂŹ3TAININGÂŹ*AR ÂŹ5-10 Slide Unit, with Screw Cap â&#x20AC;˘ Unit holds 5 slides vertically or 10 slides back-to-back â&#x20AC;˘ Polyproplene screw cap â&#x20AC;˘ 60 mL capacity
This unit is used for staining slides, or as a developing chamber for thin-layer chromatography. It holds ďŹ ve single 3â&#x20AC;? x 1â&#x20AC;? (75 mm x 25 mm) slides vertically, or 10 slides back-to-back. The screw cap is made of linerless white polypropylene to reduce solvent evaporation. The unit has a rectangular base and holds approximately 60 mL. Manufactured from soda-lime glass. Approximate inside dimensions: 26 mm L x 26 mm W x 90 mm D. Cat. No.
Description
900570 900522
Complete Replacement Cap, 58-400
Qty/Case
6 6
#OPLINÂŹ3TAININGÂŹ*AR ÂŹÂŹ 5-10 Slide Unit
Cat. No.
Description
900575
Slide Grip
Qty/Case
2
"OERNERÂŹ-ICROÂŹ4ESTÂŹ3LIDE â&#x20AC;˘ Ideal for Boerner-Jones-Lukens microďŹ&#x201A;uocculation test â&#x20AC;˘ Manufactured from USP Type III glass
This slide is used for procedures involving 0.01 to 0.15 mL of ďŹ&#x201A;uid. The slide has 10 cells in two rows of ďŹ ve each. Each cell is 2.5 mm deep and is designed to produce ďŹ&#x201A;attened drops of uniform depth. These reusable slides are manufactured from Wheaton 810 glass. Cat. No.
Description
798550
Boerner Micro Test Slide
â&#x20AC;˘ Unit holds 10 slides â&#x20AC;˘ Glass Cover â&#x20AC;˘ 65 mL capacity
900470
Description
Coplin Jar with Glass Cover
Dimensions L x W (mm)
Qty/Case
109 x 58
12
-OUNTINGÂŹ-EDIA ÂŹÂŹ "ALSAMÂŹ"OTTLEÂŹ
This popular staining jar has heavy glass walls and a broad base for increased stability. It holds ďŹ ve single 3â&#x20AC;? x 1â&#x20AC;? (75 mm x 25 mm) slides vertically, or 10 slides back to back, and requires low reagent volume (approximately 65 mL). Manufactured from soda-lime glass. Approximate inside dimensions: 26 mm L x 26 mm W x 90 mm D. Cat. No.
6
This bottle, manufactured from soda-lime glass, is ideal for applying mounting media. It comes with a glass applicator rod and a glass cap, which is ground to the shoulder of the bottle to form a seal.
Qty/Case
Cat. No.
Size (mL)
Dia x H (mm)
6
208890
100
75 x 100
Qty/Case
6
#OPLINÂŹ3TAININGÂŹ*AR ÂŹÂŹ 5-10 Slide Unit
!LCOHOLÂŹ"URNER
â&#x20AC;˘ Fits 5 single slides or 10 slides back-to-back â&#x20AC;˘ Extra tall lid accommodates 100 mm slides
This burner, manufactured from soda-lime glass, is designed for use with isopropyl or denatured ethyl alcohol. Its low-heat ďŹ&#x201A;ame is well suited for microscopy purposes. The unit is supplied with a ground glass stopper. The reservoir holds 100 mL of alcohol.
â&#x20AC;˘ Glass cap is used to reduce evaporation of alcohol when not in use
The chamber is designed with an extra tall lid to accept 5 single 25 mm x 75 mm and 25 mm x 100 mm slides or 10 slides back to back. Manufactured from soda-lime glass. Approximate inside dimensions (mm): 26 L x 26 W x 90 D. Cat. No.
Description
Qty/Case
276840
Staining Jar with Lid
6
Cat. No.
Description
237070
Alcohol Burner
Qty/Case
75 x 100
6
â&#x20AC;&#x201D; â&#x20AC;&#x201D;
25 10
Replacement Parts 237071 237072
WHEATON
Dia x H (mm)
Wick, 0.25" Dia x 6" L Cork Stopper
1.800.225.1437 (U.S. & Canada only) | +1.856.825.1100 | +1.856.825.1368 (F) | www.wheatonsci.com
3TAINING¬7ARE¬Product Application Notes
3LIDE¬#LEANING
3LIDE¬#OATING
3LIDE¬#OATING
WITH¬7HEATON¬3TAINING¬$ISHES
WITH¬3ILANE
WITH¬0OLY ,YSINE
Abstract
Abstract
Abstract
Clean microscope slides are important for all areas of microscopy. Even pre-cleaned slides can carry a significant amount of oil or lint, even from a freshly opened box.
Silane coatings are used for paraffin sections, frozen sections and in situ hybridization. A quick & easy procedure is provided to coat microscope slides with a silane coating.
Wheaton staining dishes offer a convenient method to efficiently clean a number of slides as an initial preparation for coating slides or for microscopy.
Materials and Methods
Coating slides with Poly-Lysine allows binding of DNA and certain proteins. A Poly-Lysine coating also promotes cell adhesion to slides for culturing or experiments, such as calcium ratio imaging. Wheaton staining dishes offer a convenient method for efficiently coating a number of slides.
Materials and Methods Material
Quantity
Cat. No.
Glass Microscope Slides 60 30-Slide Rack, Stainless Steel 1 Staining Dish & Cover 2 Double Distilled Water 5 liters Solid NaOH 70 g 95% Ethanol 420 mL Drying Oven* 1 Orbital Shaker 1
— 900234 900303 — — — — —
*45°C-vacuum oven preferred
Material
Quantity
Cat. No.
Staining Dish & Cover 3 20 Slide Rack, Glass 3 2% 3-aminopropyltriethoxysilane (AES) in acetone* 500 mL Double-Distilled water 500 mL Acetone 500 mL
900303 900304
*Keep this in a fume hood
Procedure 1.
Prepare 2% 3-aminopropyltriethoxysilane (AES) in acetone (do this under a fume hood).
2.
Clean slides as described in the Slide Cleaning Product Application Note.
3.
Place slides in a slide rack, and rinse slides in a staining dish with acetone. Move the rack of slides to a staining dish containing 2% AES in acetone. (Note - dedicate this staining dish for the AES solution. Do not use it for anything else). The slides will need 5 to 15 minutes in this solution.
Procedure 1.
Prepare the cleaning solution by dissolving 70 g NaOH in 28 mL double distilled water. Add 420 mL 95% ethanol. If the solution is cloudy, add double distilled water until the solution clears.
2.
Place the slides in a stainless steel rack and the rack in the staining dish. Pour the cleaning solution from Step 1 over the slides so the slides are covered. Cover the staining dish with a glass lid, and put the staining dish with slides on the orbital shaker to mix for 2 hours.
3.
4.
Transfer the slides to a fresh staining dish filled with double distilled water. Rinse the slides by plunging them in the water several times. Repeat the rinse at least 4 times, using fresh double distilled water for each rinse. It is critical to remove all traces of Ethanol-NaOH. If you are not coating the slides, place the slides in a slide rack in an oven at 45°C. Use of a vacuum oven is optional. Protect the slides from dust in the air by rinsing all glassware prior to use, and by keeping all solvents, slides and staining dishes covered.
— — —
4.
Rinse slides by dunking 4 times in fresh acetone. Repeat this wash step 2 times with fresh acetone.
5.
Rinse slides by dunking them into a staining dish containing fresh double distilled water.
6.
Dry slides overnight in a dust free environment. They can be dried in a vacuum oven. These slides can be kept for up to 6 months in a dust-free plastic box.
Materials and Methods Material
Quantity
Cat. No.
30-Slide Rack, Stainless Steel 2 900234 Staining Dish & Cover 4 900303 Poly-Lysine solution (0.1% w/v) 70 mL Available commercially Tissue Culture PBS 70 mL — Double-Distilled water 2L — Amber HDPE bottles 1000 mL 209130 Drying Oven* 1 — Orbital shaker 1 — Centrifuge 1 — Dust-free plastic containers to hold slides — *45°C - vacuum oven preferred
Procedure 1. Prepare the poly-lysine by adding 70 mL of poly-lysine to 70 mL of PBS solution and 560 mL water. Store in an amber HDPE bottle (209130). 2. Clean slides as described in the Slide Cleaning Product Application Note. Place an equal number of slides in each of two stainless steel slide racks. 3. Transfer slides to the polylysine solution and shake for 15 minutes to 1 hour. 4. Transfer the racks of slides to fresh staining dishes filled with fresh double-distilled water. Plunge up and down at least 5 times to rinse the slides. 5. Centrifuge slides on a microtiter plate carrier at 500 RPM for 5 minutes. Place paper towels under racks to absorb moisture. Use two racks of slides to balance the centrifuge. 6. Place the racks of slides in clean staining dishes with covers for transport to vacuum oven. Place the dishes in the oven at 45°C for 10 minutes. Vacuum is optional. 7. Store the slides in a plastic slide box without a rubber mat bottom. Numerous users commented that slides should be stored for 14 days before spotting DNA. Slides are best when used within 4 months.
WHEATON
138
1.800.225.1437 (U.S. & Canada only) | +1.856.825.1100 | +1.856.825.1368 (F) | www.wheatonsci.com
139
6IALS
7HEATONÂŹ6IALS
W
heaton Science Products offers the most complete line of vials and racks available to the laboratory market. Wheaton sample vials, V VialsÂŽ and liquid scintillation vials are the original and standard by which vials are judged. Wheaton sample vials, fabricated from glass tubing, offer uniform sidewall and bottom thickness. In addition, they are lightweight and have excellent strength and clarity. Our sample vials are available in both clear and amber glass and have a variety of uses ranging from sample storage to freeze drying. Our scintillation vials are the original scintillation vials invented by Wheaton over 50 years ago. Manufactured from low potassium glass, polyethylene terephthalate and high density polyethylene, the Wheaton line of vials is the largest and most diverse in the industry. The new Wheaton E-Z Ex-Traction vial is designed for automated compound management systems and the V Vials are designed for reaction and sample storage. The unique conical interior bottom of these vials ensures maximum security and economy in handling, storage and shipping of costly micro and semi-micro samples. When you are looking for a high quality and dependable vial, Wheaton can provide the product for your application. Browse through the following pages to select the vial that meets your requirement.
6IALÂŹ4YPEÂŹÂŹÂŹÂŹÂŹ
0AGE
Autosampler ..................................................... 83-96 Ampules ............................................................... 1-2 Cryogenic ..................................................... 140-142 Culture ................................................................ 142 Dilution ................................................................ 142 E-C Sample Vials .......................................... 151-152 EPA ..................................................................... 142 E-Z Ex-TractionÂŽ .................................................. 143 High Recovery .............................................. 143-145 Lab Filesâ&#x201E;˘ .................................................... 150-151 Liquid Scintillation ........................................ 146-148 Micro Sample ...................................................... 148 Mini-FileÂŽ ............................................................ 153 M-T Vial FileÂŽ ............................................... 152-153 NextGenâ&#x201E;˘ V VialÂŽ .......................................... 144-145 Omni-VialÂŽ .......................................................... 147 Racks .................................................................. 149
&ORÂŹTHEÂŹ3MALLERÂŹÂŹ ÂŹÂŹÂŹÂŹÂŹ3AMPLESÂŹINÂŹ,IFE
Sample ......................................................... 150-154 SampuleÂŽ ............................................................ 148 Serum ................................................................... 20 VaculeÂŽ ............................................................... 154 Vial FileÂŽ....................................................... 152-153 V VialÂŽ .......................................................... 144-145
WHEATON
1.800.225.1437 (U.S. & Canada only) | +1.856.825.1100 | +1.856.825.1368 (F) | www.wheatonsci.com
6IALS ¬Cryogenic #RYOGENIC¬6IALS Wheaton cryogenic vials, caps, vial racks, and freezer boxes are designed for simple identification and effortless handling. With Wheaton plastic Cryules®, both the closures and tubes are manufactured from medical-grade polypropylene with the same coefficient of expansion; this further enhances the leak proof qualities of these vials at changing temperatures. All Wheaton Cryules and racks are autoclavable up to 121°C. When autoclaving plastic Cryules, the cap must be loosened or removed to allow pressure equalization upon cooling; this prevents pressure build-up within the vial. The Wheaton glass Cryules are made from Wheaton 33 low extractable borosilicate glass, (that conforms to ASTM Type I, Class A and USP Type I requirements) which can be hermetically sealed. Use caution; do not use cryogenic containers for storage directly in contact with the liquid phase of liquid nitrogen; use in gas phase only. Always use appropriate safety equipment such as gloves, face shields, and safety cabinets to protect personnel when removing Cryules from cryogenic gases.
&ACTS¬!BOUT¬#RYOPRESERVATION • Liquid nitrogen (LN2): liquid density at the triple point is 0.807 g/mL, is inert, colorless, odorless, non-corrosive, nonflammable, and extremely cold. • Liquid nitrogen boils at -196°C, and is a cryogenic fluid which is potentially capable of causing rapid frostbite on contact with living tissue. • Cryopreservation is a process where cells or whole tissues are preserved by cooling to low sub-zero temperatures, such as (typically) 77 K or −196°C (the boiling point of liquid nitrogen).
• When cryoprotectant solutions are not used, the cells being preserved are often damaged due to freezing during the approach to low temperatures or warming to room temperature.
#OMMON¬#RYOPROTECTANTS
• A cryoprotectant is a substance that is used to protect biological tissue from freezing damage (damage due to ice formation). • Cryoprotectants act like antifreeze: they lower the freezing temperature. They also increase the viscosity. Instead of crystallizing, the syrupy solution turns into an amorphous ice.
•
DMSO (dimethyl sulfoxide)
•
Ethylene glycol
•
Glycerol
•
Propylene glycol
•
Sucrose
•
Trehalose
#RYOGENIC¬6IALS ¬&REESTANDING
Cryule Vial with Colored Caps
Vial Rack for one-hand cap removal, 985810
Freestanding Cryule Vial
Cap Inserts
#RYULE ¬#RYOGENIC¬6IAL ¬&REESTANDING
#RYULE ¬#RYOGENIC¬6IAL ¬&REESTANDING
• • • • •
• • • •
Sterile External threads 2 mL size Supplied with colored coded caps Conical bottom
These polypropylene vials are freestanding on the bench and lock into the rack (Cat. No. 985810) for one-handed cap removal. The vertical inner wall and conical bottom facilitate filling and maximum sample retrieval. The white marking area and color coded caps allow for lot and sample identification. Vials are packaged 50 per bag,10 bags per case. Cat. No.
Cap Color
Size (mL)
Dia x H (mm)
Qty/Pack
985734 985735 985736 985737 985738 985739
White Red Pink Yellow Green Blue
2 2 2 2 2 2
12 x 46 12 x 46 12 x 46 12 x 46 12 x 46 12 x 46
50 50 50 50 50 50
WHEATON
Qty/Case
500 500 500 500 500 500
Sterile Internal threads Silicone ring sealing system 1.2, 2 and 4 mL size
These freestanding polypropylene vials are internally threaded. These vials and caps feature a streamlined design with a silicone ring sealing system. Color coded cap inserts can be used for lot identification. For cap inserts, see catalog number series 242582. Vials are packaged 50 per bag,10 bags per case. Cat. No.
Size (mL)
Dia x H (mm)
Qty/Pack
985745 985746 985747
1.2 2 4
12 x 42 12 x 49 12 x 71
50 50 50
See Cap Inserts on page 142. For Cryogenic Ampules see the Ampule Section on page 1.
1.800.225.1437 (U.S. & Canada only) | +1.856.825.1100 | +1.856.825.1368 (F) | www.wheatonsci.com
Qty/Case
500 500 500
140
141
6IALS ¬Cryogenic
#RYOGENIC¬6IALS ¬2OUND¬"OTTOM
l Internraead Th
Non rile Ste Cap Inserts
#RYULE ¬6IAL ¬2OUND¬"OTTOM • • • • •
#RYULE ¬6IAL ¬2OUND¬"OTTOM • • • • • •
Non-sterile External thread Round bottom 2 mL size Screw cap included Autoclavable
Sterile Internal threads Round bottom 2, 4 and 5 mL size Color code cap inserts available separately
These uniquely designed vials are more compact than most vials, and safely store the total labeled volume. Internally threaded vials have silicone ring seals, which ensure secure cap sealing. The vials come sterilized with caps attached. 50 per bag, 10 bags per case. Color coded cap inserts can be purchased separately for lot coding. See catalog number series 242582.
These externally threaded polypropylene vials come with white polypropylene caps. The cap attaches to the outside of the vial, which means you get maximum vial capacity while the lip, as well as your hands, are protected from contamination. The vial and cap can be autoclaved. Vials are available with or without the white marking area for sample identification. Vials and caps are packed separately in polyethylene bags. Color coded caps can be purchased separately. See catalog numbers 242564 and 242566.
Cat. No.
Size (mL)
Dia x H (mm)
Qty/Pack
985742 985743 985744
2 4 5
12 x 48 12 x 70 12 x 90
50 50 50
Cat. No.
Description
985721 985726
2 mL Cryule Vial with Marking Area 2 mL Cryule Vial without Marking Area
¬ #RYOGENIC¬6IAL¬!CCESSORIES
Dia x H (mm)
12 x 44 12 x 44
Qty/Case
1000 1000
Qty/Case
500 500 500
See cap inserts on page 142.
Sterile #OLOR¬#ODED¬#RYULE ¬6IAL¬3CREW¬#AP
#RYULE ¬6IAL ¬2OUND¬"OTTOM • • • • •
• • • •
Sterile External threads Round bottom 1 and 2 mL size White screw cap
These externally threaded vials are more compact than most vials, and safely store the total labeled volume. Vials are manufactured from medical grade polypropylene, and they come sterilized with caps attached. They are packaged 50 per bag, 10 bags per case. Color coded caps can be purchased separately. See catalog numbers 242564 and 242566. Cat. No.
Size (mL)
Dia x H (mm)
Qty/Pack
985730 985731
1 2
12 x 24 12 x 44
50 50
Sterile Color coded Made from polypropylene Autoclavable
These 10 mm caps are designed for easy identification of Cryule® Vials. They fit Cryule Vials 985721, 985726, 985730, and 985731. The caps are sterilized and packed in polybags. Cat. No.
Color
Qty/Case
242564 242566
Blue Green
100 100
Qty/Case
500 500
If you need to barcode your cryogenic vial, Wheaton has the SciLution®. See pages 133-134 for more details.
Color Code your Cryule Vials with Wheaton Colored Caps (Cat. No. 242564, 242566, and 242572) WHEATON
1.800.225.1437 (U.S. & Canada only) | +1.856.825.1100 | +1.856.825.1368 (F) | www.wheatonsci.com
6IALS ¬Culture/Dilution/EPA
142
#ULTURE¬6IAL¬ • 4, 8 and 12 mL size • Wheaton 33 low extractable borosilicate glass • Deep-skirted black phenolic screw cap with 14B rubber liner • Autoclavable
#RYULE¬6IAL¬#AP¬)NSERTS • Color coded for sample and lot identification • Polypropylene • Fit vials catalog numbers 985742, 985743, 985744, 985745, 985746 & 985747
For use with internally threaded Cryule® Vial caps. Use these colored inserts for sample and lot identification. They are compatible with 985742 and 985745 series internally threaded Wheaton Cryule® Vials. Cat. No.
Color
242582 242584 242586 242588 242590 242592
Red Blue Green Yellow White Assorted (100 of each color)
Qty/Case
500 500 500 500 500 500
#RYULE ¬6IAL¬¬ &REEZER¬"OX
Engineered for use with liquid nitrogen, these convenient storage units can also be used in a freezer or at room temperature. These Freezer Boxes are made of chipboard and spray-coated with polyethylene. Accommodates 81 of either 1 or 2mL Cryule® vials. Fits
Dimensions (L x W x H)
651490
1 mL Cryule Vials
651492
2 mL Cryule Vials
5-1/4 x 5-1/4 x 1-1/4 in (13.3 x 13.3 x 3.1 cm) 5-1/4 x 5-1/4 x 1-3/4 in (13.3 x 13.3 x 4.4 cm)
Cat. No.
Size (mL)
*Dia x H (mm)
Cap Size
Qty/Case
225142 225144 225145
4 8 12
15 x 51 17 x 70 19 x 72
13-415 15-415 15-415
144 144 144
* Measurement taken with cap attached.
$ILUTION¬6IAL¬ • 4 mL size • Marked with blue line at 3 mL level • Pre-attached solid-top black phenolic screw cap with 14B rubber liner • Autoclavable
Specially suited for research studies, this vial is marked with a blue line at the 3 mL level. It can be sterilized and stored at low temperatures. Vials are packaged in corrugated trays with partitions. They are manufactured from Wheaton 33 low extractable borosilicate glass that conforms to ASTM Type I, Class A and USP Type I requirements to protect against changes in pH and to maintain the purity of the contents. Use M-T Vial File (Cat. No. 228780) for storing vials.
• For 1 and 2 mL Cryule® Vials • Holds 81 Vials
Cat. No
These culture vials feature deep-skirted screw caps to allow safer, more dependable handling when working with infectious materials. Pre-attached solid-top black phenolic screw cap with 14B rubber liner can be autoclaved. Vials are packaged in corrugated trays with partitions. Vials are manufactured from Wheaton 33 low extractable borosilicate glass that conforms to ASTM Type I, Class A and USP Type I requirements. Use M-T Vial File (Cat. No. 228780) for storing 4 mL vials.
Cat. No.
Size (mL)
*Dia x H (mm)
Cap Size
Qty/Case
225002
4
15 x 48
13-425
144
* Measurement taken with cap attached.
%0!¬6IAL ¬ ¬M, • Low extractable borosilicate glass • Vials packaged in convenient trays for ease of use • Caps attached to vials
Qty/Case
15 15
#RYULE ¬6IAL¬2ACK¬ • For use with freestanding Cryule Vials • Allows for one-handed cap removal • Holds 50 vials • Polypropylene • Autoclavable
These vials are ideal for use in water sampling according to EPA 40 CFR 136, “Guidelines for Establishing Test Procedures for the Analysis of Pollutants.” The clear vials are manufactured from Wheaton 33 low extractable borosilicate glass that conforms to USP Type I and ASTM E-438 Type I, Class A requirements, and the amber vials are manufactured from Wheaton 320 amber glass that conforms to USP Type I requirements to protect light-sensitive samples and to maintain purity of its contents. All vials are packaged in convenient trays which facilitates handling. Cat. No.
Size (mL)
Size (dr)
*Dia x H (mm)
Cap Size
Qty/Case
Clear Vial with Open Top Black Phenolic Teflon® Faced Silicone Lined Cap
This unique rack securely locks externally threaded freestanding Cryule® Vials in place for one-handed cap removal. Non-skid feet offer additional stability for bench work. This 50-position rack will also work with other freestanding cryogenic vials. Rack is made of durable, autoclavable polypropylene. This rack allows easy sample identification with an alphanumeric index on top of each rack. Molded corner posts provide stability when stacking. Rack can be autoclaved at 121°C for 20 minutes. Dimensions Cat. No.
Well ID
985810 12.5 mm
Description
50-Position Rack
WHEATON
No. of Wells
(L x W x H)
5 deep x 10 wide
7-5/8 x 4 x 7/8 in (19 x 10 x 2.2 cm)
Qty/Case
5
225310
40
10
28 x 98
24-400
72
Amber Vial with Open Top White Polypropylene Teflon® Faced Silicone Lined Cap 225315
40
10
28 x 98
24-400
72
*Measurement taken with cap attached.
2EPLACEMENT¬3CREW¬#APS¬ ¬3EPTA Cat. No.
Description
W240518 W240598 W224600
Black Phenolic Open Top Screw Cap w/o septa 24-400 10 mils Teflon®/90 mils Silicone Septa for 24-400 screw cap — White Glass-Filled Open Top Polypropylene Cap 24-400 with Bonded 5 mils Teflon®/120 mils Silicone Septa
1.800.225.1437 (U.S. & Canada only) | +1.856.825.1100 | +1.856.825.1368 (F) | www.wheatonsci.com
Cap Size Qty/Case
200 100 200
143
6IALS ¬High Recovery nted Design Pate
#LOSURES¬FOR¬% :¬%X 4RACTION ¬6IALS
New
New Black Phenolic Screw Cap
New
Polypropylene Screw Cap
Polypropylene, Open Top, Screw Cap
"LACK¬0HENOLIC¬3CREW¬#APS¬WITH¬4EmON ¬&ACED¬ "¬2UBBER¬,INERS Engineered for Automated Sample Handling Systems
These autoclavable caps are designed to ensure the ultimate in product safety. The liners are made of a nontoxic white styrene-butadiene rubber and are faced with Teflon which offers excellent chemical resistance. They are available in convenient lab pack quantities as well as larger case packs.
% :¬%X 4RACTION ¬6IAL • • • •
Conical well ensures maximum sample recovery Quality engineered for automated sample handling systems Made from low extractable borosilicate glass Excellent for Compound Storage
The new Wheaton E-Z Ex-Traction Vials combine the best attributes of high recovery vials with a unique bottom to provide the optimum benefits to users of automated or manual handling and storage systems in compound or biological sample applications. Precision manufactured from low extractable borosilicate glass, E-Z Ex-Traction Vials conform to ASTM Type I, Class A and USP Type I requirements. E-Z Ex-Traction Vials are supplied in corrugated trays with SBS (solid bleach sulfate) partitions which maintain clean vial conditions during shipping and storing prior to use. Custom packaging options are also available to meet customer specifications. Cat. No.
Size (mL)
Dia x H (mm)
Cap Size
Qty/Pack
2 2 4 4 8 8 10 10 20 20
15 x 32 15 x 32 15 x 45 15 x 45 16.75 x 60 16.75 x 60 19 x 70 19 x 70 26.5 x 67 26.5 x 67
13-425 13-425 13-425 13-425 15-425 15-425 22-400 22-400 24-400 24-400
250 250 250 250 250 250 100 100 100 100
W224601 W224603 W224613 W224617 W224618 W224619 W224630** W224632** W224634 W224636
Qty/Case
250 1000 250 1000 250 1000 100 500 100 500
#USTOM¬% :¬%X 4RACTION¬6IALS Wheaton offers E-Z Ex-Traction Vials in five standard sizes and configurations. If your automated system is designed to handle vials with different dimensions or if your process requires vials to contain specific volumes, we can meet your requirements. To provide your specifications and to receive a quote, contact your local Wheaton Sales Representative at 800-225-1437 or your local International Distributor. *The bottom design of these vials creates a large, smooth and flat surface that offers greater stability and gives the user the option of applying larger 2D bar codes. **Shoulderless vial
Cat. No.
Cap Size
Qty/Pack
W240820 W240821 W240822 W240823 W240824 W240825 240418 W240827
13-425 13-425 15-425 15-425 22-400 22-400 24-400 24-400
250 250 250 250 100 100 100 100
Qty/Case
250 1000 250 1000 100 500 100 500
0OLYPROPYLENE¬3CREW¬#APS¬WITH¬"ONDED¬4EmON ¬&ACED¬3ILICONE¬,INERS These white autoclavable caps have a bonded Teflon faced silicone liner making them ideal for storage and containment of volatile solvents, sensitive compounds, and corrosive chemicals. The liners consist of 0.055" (1.4 mm) of silicone and 0.005" (0.14 mm) of Teflon. They are available in convenient lab pack quantities as well as larger case packs. Cat. No.
Cap Size
Qty/Pack
W240830 W240831 W240832 W240833 W240834 W240835 W240836 W240837
13-425 13-425 15-425 15-425 22-400 22-400 24-400 24-400
250 250 250 250 100 100 100 100
Qty/Case
250 1000 250 1000 100 500 100 500
0OLYPROPYLENE ¬/PEN¬4OP ¬3CREW¬#APS¬WITH¬"ONDED¬4EmON ¬&ACED¬ 3ILICONE¬,INERS These autoclavable open top caps have a bonded Teflon faced silicone liner making them ideal for storage and retrieval of volatile solvents, sensitive compounds and corrosive chemicals. The liners consist of 0.055" (1.4 mm) of silicone and 0.005" (0.14 mm) of Teflon. They are available in convenient lab pack quantities as well as larger case packs. Cat. No.
Cap Size
Color
Qty/Pack
W242710 W240840 W240841 W240842 W240843 W240844 W240845 W240846 W240847
13-425 13-425 13-425 15-425 15-425 22-400 22-400 24-400 24-400
Black White White White White White White White White
250 250 250 250 250 100 100 100 100
When you need to apply a treatment to your container Wheaton has the SciLutions®. Bar Coding
Critical Cleaning
Surface Treatment
Taring
Custom Containers
For more information see pages 133-134 or contact your local Wheaton Sales Representative.
WHEATON
1.800.225.1437 (U.S. & Canada only) | +1.856.825.1100 | +1.856.825.1368 (F) | www.wheatonsci.com
Qty/Case
250 250 1000 250 1000 100 500 100 500
6IALS ¬High Recovery
.EXT'EN©¬6¬6IAL ¬#LEAR¬'LASS .EXT'EN©¬¬6¬6IALS ¬&OR¬(IGH¬3AMPLE¬2ECOVERY • New fire glazed bottom protects against glass particulates • New low particulate packaging protects against contamination during transportation and storage • Conical interior bottom provides downward drainage • Made from clear and amber borosilicate glass • Available with solid and open top screw cap or serum finish
The new NextGen V Vials were created to provide users with all of the benefits of our original V Vials but with some additional enhancements. The new fire glazed bottom protects against glass particulates while the new low particulate packaging protects against contamination during transportation and storage. These exceptionally sturdy vials have a conical interior bottom that allows for maximum retrieval of content by syringe or micropipette. V Vials can be used for small-scale reactions, centrifugation storage and shipping. Clear V Vials are manufactured from Wheaton 33 low extractable borosilicate glass that conforms to ASTM Type I, Class A and USP Type I requirements to safeguard against a change in product pH caused by alkali, which can be extracted by ordinary glass. Amber V Vials are manufactured from Wheaton 320 low extractable borosilicate glass that conforms to USP Type I requirements. V Vials are used for small-scale reactions with Wheaton Micro Kit catalog number 774600. They are also used in the biochemical, pharmaceutical and radiochemical industries.
-ORE¬!PPLICATIONS¬AND¬4ECHNIQUES¬&OR¬5SING¬7HEATON¬6¬6IALS Anaerobic reactions
Homogenization
Catalytic hydrogenation
Hybridization
Centrifugation
Micro mixing
Concentration
Packaging
Derivatization
Radiosynthesis
• • • •
Clear glass vial Solid top black phenolic cap Teflon® faced 14B rubber liner Screw cap attached
Cat. No
Size (mL)
Dia x H (mm) (cap on)
Cap Size
Qty/Case
W986273NG** 0.3 13 x 35 13-425 12 W986274NG** 1.0 13 x 44 13-425 12 W986276NG** 2.0 17 x 61 15-415 12 W986272NG** 2.0 20 x 44 20-400 12 W986277NG** 3.0 20 x 50 20-400 12 W986279NG** 5.0 20 x 65 20-400 12 Clear Vial with Solid Top Black Phenolic Teflon® Faced 14B Rubber Lined Caps Attached W986253NG 0.3 13 x 35 13-425 12 W986254NG 1.0 13 x 44 13-425 12 W986256NG 2.0 17 x 61 15-415 12 W986261NG 2.0 20 x 44 20-400 12 W986257NG 3.0 20 x 50 20-400 12 W986259NG 5.0 20 x 65 20-400 12 W986260NG 10.0 24 x 72 24-400 6
Clear Vial with Open Top Black Phenolic Teflon® Faced Silicone Lined Caps Attached W986281NG 0.1 12 x 35 8-425 12 W986282NG 0.3 12 x 35 8-425 12 W986283NG 0.3 13 x 35 13-425 12 W986284NG 1.0 13 x 44 13-425 12 W986288NG 2.0 20 x 44 20-400 12 W986287NG 3.0 20 x 50 20-400 12 W986289NG 5.0 20 x 65 20-400 12 W986290NG 10.0 24 x 72 24-400 6 *Measurement taken with cap attached. ** Graduated
Extraction
.EXT'EN©¬6¬6IAL ¬#LEAR¬'LASS • • • •
Clear graduated vial Open top black phenolic cap Teflon® faced silicone liner Screw cap attached
Cat. No
NextGen™ V Vial® Packaging
WHEATON
W986293NG W986294NG W986298NG W986297NG W986299NG
Size (mL)
Dia x H (mm) (cap on)
Cap Size
Qty/Case
0.3 1.0 2.0 3.0 5.0
13 x 35 13 x 44 20 x 44 20 x 50 20 x 65
13-425 13-425 20-400 20-400 20-400
12 12 12 12 12
1.800.225.1437 (U.S. & Canada only) | +1.856.825.1100 | +1.856.825.1368 (F) | www.wheatonsci.com
144
145
6IALS ¬High Recovery
.EXT'EN©¬6¬6IAL ¬#LEAR¬'LASS
.EXT'EN©¬6¬6IAL ¬!MBER¬'LASS
• Non-graduated glass vial • Crimp top finish • Closure sold separately*
• • • •
Cat. No
W986211NG W986212NG W986213NG W986214NG W986216NG W986217NG W986219NG
Size (mL)
Mouth ID x OD (mm)
Dia x H (mm)
0.1 0.3 0.3 1.0 2.0 3.0 5.0
5 x 11 5 x 11 7 x 13 7 x 13 13 x 20 13 x 20 13 x 20
12 x 32 12 x 32 13 x 32 13 x 41 20 x 40 20 x 46 20 x 61
Qty/Case
12 12 12 12 12 12 12
Non-graduated glass vial Open top black phenolic cap Teflon® faced silicone liner Screw cap attached
Cat. No
W986353NG W986354NG W986356NG W986357NG W986359NG
Size (mL)
Dia x H (mm) (cap on)
Cap Size
Qty/Case
0.3 1.0 2.0 3.0 5.0
13 x 35 13 x 44 20 x 44 20 x 50 20 x 65
13-425 13-425 20-400 20-400 20-400
12 12 12 12 12
*Closure not included. Please see the Cap and Closure section on pages 32-35 for a complete listing of aluminum seals and rubber stoppers. Note: When choosing aluminum seal and stopper use the mouth OD dimension of the vial.
6¬6IALS ¬!MBER¬'LASS
.EXT'EN©¬6¬6IAL ¬!MBER¬'LASS¬¬ • Non-graduated glass vial • Screw thread finish • Closure sold separately* Cat. No
W986313NG W986314NG W986316NG W986317NG W986319NG
.EXT'EN©¬6¬6IAL ¬!MBER¬'LASS • • • •
Non-graduated glass vial Solid top black phenolic cap Teflon® faced 14B rubber liner Screw cap attached
Cat. No
W986333NG W986334NG W986336NG W986337NG W986339NG
Dia x H (mm)
Cap Size
Qty/Case
0.3 1.0 2.0 3.0 5.0
13 x 35 13 x 44 20 x 44 20 x 50 20 x 65
13-425 13-425 20-400 20-400 20-400
12 12 12 12 12
*Closure not included. For a complete listing of screw caps see page 37.
3PIN¬6ANE¬
Size (mL)
Dia x H (mm) (cap on)
Cap Size
Qty/Case
0.3 1.0 2.0 3.0 5.0
13 x 35 13 x 44 20 x 44 20 x 50 20 x 65
13-425 13-425 20-400 20-400 20-400
12 12 12 12 12
Replacement caps for V Vials are located on page 37.
WHEATON
Size (mL)
• Used to stir sample within the V Vial® • Magnetic bar in V-shape
Use the Wheaton Spin Vane with a magnetic stirrer when you need to stir your sample in the V Vial. The Teflon® Spin Vane has a cross-mounted, molded-in magnetic bar in a V-shape designed specifically for use in V Vials®.
Cat. No.
Description
903061 903063
Fits 0.3 and 1 mL V Vials Fits 2, 3, 5 and 10 mL V Vials
1.800.225.1437 (U.S. & Canada only) | +1.856.825.1100 | +1.856.825.1368 (F) | www.wheatonsci.com
Qty/Case
6 6
6IALS ¬Liquid Scintillation
7HEATONx9OUR¬6IALS¬3OURCE¬&OR¬$ECADES Wheaton has been supplying scintillation vials to the scientific community for decades. Researchers utilize the vials, not only for scintillation counting instrumentation, but also as sample vials and for transferring samples from one lab to another. Quality, a Wheaton hallmark, allows you to depend on us for providing superior products for research requirements. For your scintillation or sample vial requirements select from glass, HDPE or PET vials. Glass Vials are manufactured from Wheaton 180 low potassium borosilicate glass that conforms to ASTM Type I, Class A and USP Type I requirements. Critical manufacturing tolerances ensure reliable, consistent results for scintillation counting. Vials load properly into counting machines without jamming or breaking. Background counts are consistent and low;
ultraviolet transmission is high. White caps fit tightly to avoid solubilizer fumes in the laboratory and have tops suitable for writing. HDPE Vials are made from high density polyethylene which features lightweight walls for increased counting efficiency. These premium vials are engineered and produced to precise tolerances to avoid jamming. Conventional screw thread caps ensure the most effective seal against loss of contents and fume contamination in your laboratory. PET Vials manufactured from crystal clear polyethylene terephthalate offer significant advantages over glass counting vials, including a low background count, having the clarity of glass with the safety of plastic, and they are economical.
Cat. No.
Cap Size
Cap Material
Liner Material
Qty/Case
—
—
500
Polypropylene Polypropylene Urea Urea Urea Polypropylene Polypropylene Urea Urea
Foamed Polyethylene Metal Foil Metal Foil Poly Seal Cone Polyethylene Disc Foamed Polyethylene Metal Foil Metal Foil Polyethylene Disc
500 500 500 500 500 500 500 500 500
Foamed Polyethylene Metal Foil Metal Foil Poly Seal Cone Foamed Polyethylene Metal Foil
500 500 500 500 500 500
Vials without Screw Caps 986532
22-400
Vials with Screw Caps Attached
,IQUID¬3CINTILLATION¬6IAL ¬'LASS • • • • •
20 mL size Made from Wheaton 180 low potassium borosilicate glass Background counts are consistent and low; ultraviolet transmission is high Available with cap attached, caps packed separately or without cap Dimensions (OD x H): 28 mm x 61 mm (with cap attached)
WHEATON
146
986540 986541 986542 986546 986548 986560 986561 986562 986568
22-400 22-400 22-400 22-400 22-400 24-400 24-400 24-400 24-400
Vials with Screw Caps Packed Separately 986580 986581 986582 986586 986590 986591
22-400 22-400 22-400 22-400 24-400 24-400
Polypropylene Polypropylene Urea Urea Polypropylene Polypropylene
1.800.225.1437 (U.S. & Canada only) | +1.856.825.1100 | +1.856.825.1368 (F) | www.wheatonsci.com
147
6IALS ¬Liquid Scintillation
3CINTILLATION¬6IAL ¬($0%¬
3CINTILLATION¬6IAL ¬0%4
• • • • •
• • • • • •
20 mL size Made from high density polyethylene Available with screw cap attached or with caps packed separately Dimensions (OD x H): 27 mm x 61 mm (with cap attached) Shrink-wrapped in plastic
These 20 mL vials are manufactured from high density polyethylene. Vials with caps attached are packaged in individual cells in trays of 100. Vials with screw caps packed separately are packaged in polyethylene bags of 100 and placed in a separate tray. Cases of 1000 vials are packed in a single plastic bag with caps in a separate bag. Trays of 100 vials are shrink-wrapped in plastic for protection against contamination. Cat. No.
Cap Size
Cap Material
Liner Material
Qty/Case
Vials with Screw Caps Attached 986700 986701 986702 986704 986706
22-400 22-400 22-400 22-400 22-400 22-400 22-400 22-400 22-400 22-400 22-400 22-400 22-400 22-400 22-400
For optimal performance in the laboratory, PET plastic vials provide the clarity of glass and have the safety of using plastic. Vials can be safely incinerated; no harmful gas is generated; only CO2 and H2O are created. Lightweight, and virtually unbreakable PET vials offer low permeability to solvents and minimal background counts. Trays of 100 vials are shrink-wrapped in plastic for protection against contamination. Cat. No.
Cap Size
Cap Material
Liner Material
Qty/Case
Vials with Screw Caps Attached
Polypropylene Polypropylene Urea Polyethylene Urea
Foamed Polyethylene Metal Foil Metal Foil Linerless Poly-Cone
500 500 500 500 500
Foamed Polyethylene Foamed Polyethylene Metal Foil Metal Foil Metal Foil Metal Foil Linerless Linerless Poly Seal Cone Poly Seal Cone
500 1000 500 1000 500 1000 500 1000 500 1000
Vials with Screw Caps Packed Separately 986710 986720 986711 986721 986712 986722 986714 986724 986716 986726
20 mL size Made from polyethylene terephthalate (PET) Clarity of glass with safety of plastic Low permeability to solvents and minimal background count Available with screw cap attached or with caps packed separately Dimensions (OD x H): 27 mm x 61 mm (with cap attached)
Polypropylene Polypropylene Polypropylene Polypropylene Urea Urea Polyethylene Polyethylene Urea Urea
986730 986731 986732 986734 986736
22-400 22-400 22-400 22-400 22-400
Polypropylene Polypropylene Urea Polyethylene Urea
Foamed Polyethylene Metal Foil Metal Foil Linerless Poly Seal Cone
500 500 500 500 500
Foamed Polyethylene Foamed Polyethylene Metal Foil Metal Foil Metal Foil Metal Foil Linerless Linerless Poly Seal Cone Poly Seal Cone
500 1000 500 1000 500 1000 500 1000 500 1000
Vials with Screw Caps Packed Separately 986750 986740 986751 986741 986752 986742 986754 986744 986756 986746
22-400 22-400 22-400 22-400 22-400 22-400 22-400 22-400 22-400 22-400
Polypropylene Polypropylene Polypropylene Polypropylene Urea Urea Polyethylene Polyethylene Urea Urea
/MNI 6IAL ¬0OLYPROPYLENE¬ • • • • •
4 mL size Made from polypropylene Polypropylene press-fit cap packed separately Dimensions (OD x H): 13 mm x 57 mm Autoclavable
These vials are designed for beta and gamma counting, but they can also be used for RIA, liquid scintillation counting, sample storage, sample counting and chromatography. Omni-Vials have a smooth interior allowing easy transfer and access with a pipettor. Polyolefins used in these vials can be safely incinerated without the formation of hazardous gases. Vials and caps are packed separately in two polybags that contain 500 each. A polybag liner is also included for easy disposal of the vials. Vial can be autoclaved for 15 minutes at 121°C at 15 psi.
WHEATON
Cat. No.
Description
Cap Material
Liner Material
225402
4 mL Omni-Vial
Polypropylene
Linerless
1.800.225.1437 (U.S. & Canada only) | +1.856.825.1100 | +1.856.825.1368 (F) | www.wheatonsci.com
Qty/Case
1000
6IALS ¬Liquid Scintillation
3AMPULE ¬6IAL ¬'LASS¬
3CINTILLATION¬6IAL ¬($0%
• • • • •
• • • •
6 mL size Made from Wheaton 180 low potassium borosilicate glass Background counts are consistent and low; ultraviolet transmission is high Screw caps packed separately Dimensions (OD x H): 17 mm x 58 mm (with cap attached)
These 6 mL disposable glass sample vials are economical when used as liquid scintillation vials. They are manufactured from Wheaton 180 low potassium borosilicate glass that conforms to ASTM Type I, Class A and USP Type I requirements. Vials are packed in individual cells in trays of 200. Vials in trays are shrink-wrapped in plastic for protection against contamination. Catalog number 986491 is specially designed for those instruments requiring a cap smaller in diameter than the vial to prevent jamming. Cat. No.
Cap Size
Cap Material
Liner Material
986491 986492
13-425 15-425
Urea Urea
Metal Foil Metal Foil
148
6 mL size Made from high density polyethylene Available with quarter-turn cap or press fit cap Dimensions (OD x H): 17 mm x 57 mm (with cap attached)
These 6 mL vials are manufactured from high density polyethylene and have a quarter-turn cap. The hanging cap allows vial suspension and easy access when used with Wheaton glass and PET, 20 mL liquid scintillation vials with 22 mm neck size. Cat. No.
Description
Cap Material
Qty/Case
225414 225415
6 mL Vial with Press Fit Cap 6 mL Vial with Hanging Cap
Polypropylene Polypropylene
1000 1000
Qty/Case
1000 1000
,IQUID¬3CINTILLATION¬6IAL¬#APS
3AMPULE ¬6IAL ¬($0% • • • •
6 mL size Made from high density polyethylene Screw caps packed separately Dimensions (OD x H): 17 mm x 57 mm (with cap attached)
Cat. No.
Cap Size (mm)
Cap Material
Cap Liner Material
Qty/Case
240804 240805 240817 240818 240917 241009 241017 241018 241317
22-400 24-400 22-400 24-400 22-400 15-425 22-400 24-400 22-400
Polypropylene Polypropylene Urea Urea Urea Urea Urea Urea Polyethylene
Metal Foil Metal Foil Polyethylene Disc Polyethylene Disc Poly Seal Cone Metal Foil Metal Foil Metal Foil Linerless
1000 1000 1000 1000 1000 1000 1000 1000 1000
-ICRO¬3AMPLE¬6IAL¬
These 6 mL vials are manufactured from high density polyethylene and are economical when used as liquid scintillation vials. Vials and caps are bulk packed in two separate plastic bags. Cat. No.
Cap Size
Cap Material
Liner Material
986644 986645
18 18
Polypropylene Polypropylene
Linerless Linerless
• • • •
Qty/Case
1000 2000
2 mL size Small size reduces sample to surface contact Made from Wheaton 33 low extractable borosilicate glass Attached polypropylene screw cap with metal foil liner
These vials are packaged in corrugated trays with partitions. Metal foil liner has excellent barrier properties for hydrocarbons. Use M-T Vial File Cat. No. 228778 for storing vials.
4ECHNICAL¬!SSISTANCE Give us a call if you need technical assistance 1.800.225.1437 (U.S. & Canada Only) I +1.856.825.1100 Business hours: 8:00 AM to 5:00 PM EST in U.S.A.
Cat. No.
Size (mL)
*Dia x H (mm)
Cap Size
225081
2
12 x 38
8-425
* Measurement taken with cap attached.
WHEATON
1.800.225.1437 (U.S. & Canada only) | +1.856.825.1100 | +1.856.825.1368 (F) | www.wheatonsci.com
Qty/Case
288
6IALS ¬Racks
149
6IAL¬2ACK ¬0OLYPROPYLENE¬
$ISPOSABLE¬2ACKS¬
• Size of rack depends on vial OD • Easy to clean and autoclavable • Alphanumeric indexing
• Polystyrene • Three sizes available • Catalog numbers 868608, 868615 & 868617
Wheaton vial racks come in a variety of sizes. The racks are manufactured from polypropylene and can be easily cleaned in an automatic washer or autoclaved. The racks are sturdy and can be stacked, even when the vials are in place. Each well has an opening in the bottom to facilitate drainage. Autoclavable at 121°C for 20 minutes.
Selecting The Proper Rack: When selecting the proper rack, the vial OD can not exceed the well ID dimension.
9.5 mm Well ID 96-Position 985750
12.5 mm Well ID 50-Position 985800
17.1 Well ID 90-Position 868810
Cat. No.
12.5 mm Well ID 50-Position 985810*
23.1mm Well ID 36-Position 868805
15.5 mm Well ID 48-Position 868804
28.1 mm Well ID 50-Position 868806
Well ID (mm)
Description
No. of Wells
9.5 12.5 12.5* 15.5 17.1 23.1 28.1 30.0
96-Position Rack 50-Position Rack 50-Position Rack 48-Position Rack 90-Position Rack 36-Position Rack 50-Position Rack 50-Position Rack
8 deep x 12 wide 5 deep x 10 wide 5 deep x 10 wide 4 deep x 12 wide 6 deep x 15 wide 3 deep x 12 wide 5 deep x 10 wide 5 deep x 10 wide
23 43 52
50-Position Rack 48-Position Rack 35-Position Rack
5 deep x 10 wide 4 deep x 12 wide 5 deep x 7 wide
30 mm Well ID 50-Position 868808
Dimensions (L x W x H)
Qty / Case
Polypropylene Rack 985750 985800 985810* 868804 868810 868805 868806 868808
7 1/4 x 5 x 7/8 in 7 5/8 x 4 x 7/8 in 7 5/8 x 4 x 7/8 in 10 5/8 x 3 3/4 x 1-1/8 in 13 x 6 3/4 x 1-1/4 in 12 3/4 x 3 5/8 x 1-1/8 in 13 x 6 3/4 x 1-1/4 in 13 1/4 x 6 3/4 x 1-1/4 in
18.5 x 12.5 x 2.2 cm 19 x 10 x 2.2 cm 19 x 10 x 2.2 cm 26.6 x 9.4 x 2.8 cm 33 x 17 x 3 cm 32.2 x 9.1 x 2.8 cm 33 x 17 x 3 cm 33.7 x 17 x 3 cm
5 5 5 5 5 5 5 5
10 1/2 x 5 1/2 x 1 1/8 in 26.7 x 14 x 2.9 cm 14 3/4 x 11 1/8 x 1 3/4 in 37.5 x 28.3 x 4.4 cm 15 3/4 x 11 1/2 x 2 1/2 in 40 x 29.2 x 6.4 cm
5 8 8
Disposable Polystyrene Rack 868608 868615 868617
*This rack is specially designed for use with Freestanding Cryule® Vials. The vials lock in the rack for one-handed cap removal.
The M-T Vial File® provides a compact, easily accessible means of sample storage. The vials are stored in individual partitions within a clear polystyrene case. Foam inserts and partitions provide extra protection for the vials. The alphanumerical indexing card allows for identification of sample vials. M-T Vial File comes with polystyrene case, partitions, foam inserts and indexing card. Partitions and index cards can also be purchased separately. Cat. No.
Description
Stores
Qty/Case
Complete M-T Vial File without Vials 228778 228780
- 4¬6IAL¬&ILE ¬ • • • • •
60 – 2 mL vials 40 – 4 mL vials
6 6
For use with 228778 For use with 228780
60 – 2 mL vials 40 – 4 mL vials
35 35
For use with 228778 For use with 228780
60 – 2 mL vials 40 – 4 mL vials
6 6
Index Cards
Clear plastic hinged case for use with 2 and 4 mL vials Convenient for storing and transporting vials Partitions and foam inserts protect vials Includes alphanumerical indexing card Extra partitions and index cards can be purchased separately
WHEATON
M-T Vial File M-T Vial File
228783 228785
Partitions W228781 W228782
1.800.225.1437 (U.S. & Canada only) | +1.856.825.1100 | +1.856.825.1368 (F) | www.wheatonsci.com
6IALS ¬Sample
150
3AMPLE¬6IALS¬IN¬,AB¬&ILE© • • • •
Vials with caps attached packaged in partitioned trays Clear and amber vials made from borosilicate glass Shorty Vials® feature a low profile for greater stability Choice of screw cap liners for aqueous or organic samples
Sample Vials in Lab File are packaged in corrugated trays with partitions. Clear vials are manufactured from Wheaton 33 low extractable borosilicate glass that conforms to ASTM Type I, Class A and USP Type I requirements, and amber vials are manufactured from Wheaton 320 glass that conforms to USP Type I requirements to protect light-sensitive samples. Shorty Vials feature a low profile for greater stability and less dead volume above the sample, making it ideal for compound storage. Catalog numbers 225012, 225014 have a white marking area for sample identification. Black phenolic screw caps are attached to vials. It is suggested to use 14B rubber lined caps for aqueous samples, and Teflon® faced 14B rubber lined caps for organic samples. Vials and caps are autoclavable. Replacement caps can be purchased separately. See pages 37 and 152 for screw cap ordering information.
6IALS¬FOR¬/RGANIC¬3AMPLES¬ (with caps attached) Cat. No.
Size (mL)
Size (dr)
Dia x H (mm) (cap on)
Cap Size
Qty/Case
Clear Vials with Solid Top Black Phenolic Teflon® Faced 14B Rubber Lined Caps
Clear Vial
Amber Vial
Vial with Writing Patch
W224581 W224582 W224584 W224585 W224586 W224588 W224589 W224590 W224591
Shorty Vial®
6IALS¬FOR¬!QUEOUS¬3AMPLES¬ (with caps attached) Cat. No.
Size (mL)
Size (dr)
Dia x H (mm) (cap on)
2* 4** 8 12 16 24 20 25 40
1/2 1 2 3 4 6 5 6.25 10
12 x 38 15 x 48 17 x 63 19 x 68 21 x 73 23 x 88 28 x 60 28 x 73 28 x 98
Qty/Case
8-425 13-425 15-425 15-425 18-400 20-400 24-400 24-400 24-400
288 144 144 144 144 144 72 72 72
2* 4** 8 20 40
1/2 1 2 5 10
12 x 38 15 x 48 17 x 63 28 x 60 28 x 98
8-425 13-425 15-425 24-400 24-400
288 144 144 72 72
Clear Vials with White Marking Area and Solid Top Black Phenolic 14B Rubber Lined Caps 225012 225014
4** 8
1 2
15 x 48 17 x 63
2* 4** 6
1/2 1 1 1/2
15 x 31 17 x 41 19 x 43
13-425 15-425 13-425 15-425 15-425
W224681 W224682 W224684 W224604 W224605
**Fits the M-T Vial File, 228780.
WHEATON
288 144 144 144 144 144 72 72 72
2* 4** 8 20 40
1/2 1 2 5 10
12 x 38 15 x 48 17 x 63 28 x 57 28 x 95
8-425 13-425 15-425 24-400 24-400
288 144 144 72 72
Clear Shorty Vials® with Solid Top Black Phenolic Teflon® Faced 14B Rubber Lined Caps W224606 W224607 W224608
2* 4** 6
1/2 1 1 1/2
15 x 31 17 x 41 19 x 43
13-425 15-425 15-425
200 200 200
Cap Size
Qty/Case
*Fits the M-T Vial File, 228778.
6IALS¬FOR¬%NVIRONMENTAL¬!NALYSIS¬¬ (with caps attached) Cat. No.
144 144
Size (mL)
Size (dr)
Dia x H (mm) (cap on)
200 200 200
(Septa of 5 mils of Teflon® facing 120 mils of silicone is bonded to cap.)
W224609 W224610 W224611
20 25 40
5 6.25 10
28 x 60 28 x 73 28 x 98
24-400 24-400 24-400
72 72 72
Amber Vials with Open Top White Polypropylene Teflon® Faced Silicone Lined Caps (Septa of 5 mils of Teflon® facing 120 mils of silicone is bonded to cap.)
W224612 W224614
*Fits the M-T Vial File, 228778.
8-425 13-425 15-425 15-425 18-400 20-400 24-400 24-400 24-400
Clear Vials with Open Top White Polypropylene Teflon® Faced Silicone Lined Caps
Clear Shorty Vials® with Solid Top Black Phenolic 14B Rubber Lined Caps W225291 W225292 W225293
12 x 38 15 x 48 17 x 63 19 x 68 21 x 73 23 x 88 28 x 60 28 x 73 28 x 98
**Fits the M-T Vial File, 228780.
Amber Vials with Solid Top Black Phenolic 14B Rubber Lined Caps 224981 224982 224984 W224820 W224840
1/2 1 2 3 4 6 5 6 1/4 10
Amber Vials with Solid Top Black Phenolic Teflon® Faced 14B Rubber Lined Caps Cap Size
Clear Vials with Solid Top Black Phenolic 14B Rubber Lined Caps 224881 224882 224884 224885 224886 224888 225288 225289 225290
2* 4** 8 12 16 24 20 25 40
20 40
5 10
28 x 60 28 x 98
1.800.225.1437 (U.S. & Canada only) | +1.856.825.1100 | +1.856.825.1368 (F) | www.wheatonsci.com
24-400 24-400
72 72
151
6IALS ¬Sample
Lab File™ without Caps
Clear Vials
Shorty Vial®
Amber Vials
3AMPLE¬6IALS¬IN¬,AB¬&ILE©¬(without caps) • Clear and amber vials made from borosilicate glass • Shorty Vials® feature a low profile for greater stability • Screw caps available separately Cat. No.
Size (mL)
Size (dr)
Dia x H (mm)
Cap Size
Qty/Case
1/2 1 2 3 4 6 5 6-1/4 10
12 x 35 15 x 45 17 x 60 19 x 65 21 x 70 23 x 85 28 x 57 28 x 70 28 x 95
8-425 13-425 15-425 15-425 18-400 20-400 24-400 24-400 24-400
200 200 200 200 200 200 200 200 200
Clear Vials without Caps 224801 224802 224804 224805 224806 224808 224831 224832 224833
2 4 8 12 16 24 20 25 40
Cat. No.
Size (mL)
Size (dr)
Dia x H (mm)
Cap Size
Qty/Case
1/2 1 2 5 10
12 x 35 15 x 45 17 x 60 28 x 57 28 x 95
8-425 13-425 15-425 24-400 24-400
200 200 200 200 200
15 x 28 17 x 38 19 x 40
13-425 15-425 15-425
200 200 200
Amber Vials without Caps 224811 224812 224814 W224815 224836
2 4 8 20 40
Clear Shorty Vials® without Caps 224821 224822 224823
2 4 6
1/2 1 1-1/2
% #¬3AMPLE¬6IALS % #¬3AMPLE¬6IALS¬FOR¬!QUEOUS¬3AMPLES Cat. No.
Size (mL)
Size (dr)
*Dia x H (mm)
Cap Size
Qty/Case
Clear Vial with Solid Top Black Phenolic 14B Rubber Lined Caps 224720 224721 224722 224724 224725 224726 224728
1.8 2 4 8 12 16 24
3/8 1/2 1 2 3 4 6
12 x 35 12 x 38 15 x 48 17 x 63 19 x 68 21 x 73 23 x 88
8-425 8-425 13-425 15-425 15-425 18-400 20-400
200 200 200 200 200 200 200
Amber Vials with Solid Top Black Phenolic 14B Lined Caps 224730 224731 224732 224734
% #¬3AMPLE¬6IALS¬(With Screw Cap) • • • •
EConomically priced Vials and screw caps packaged separately Clear and amber vials made from borosilicate glass Choice of screw cap liners for aqueous or organic samples
These economically priced sample vials are conveniently packed in two shrink-wrapped packs of 100 vials. This packaging reduces contamination from corrugated material found in traditional packaging. The clear vials are manufactured from Wheaton 33 low extractable borosilicate glass that conforms to ASTM Type I, Class A and USP Type I requirements, and the amber vials are manufactured from Wheaton 320 amber glass that conforms to USP Type I requirements to protect light-sensitive samples. Black phenolic screw caps are packaged separately and inserted in the box with the vials. It is suggested to use 14B rubber lined caps for aqueous samples and Teflon® faced 14B rubber lined caps for organic samples. Replacement caps can be purchased separately. WHEATON
1.8 2 4 8
3/8 1/2 1 2
12 x 35 12 x 38 15 x 48 17 x 63
8-425 8-425 13-425 15-425
200 200 200 200
% #¬3AMPLE¬6IALS¬FOR¬/RGANIC¬3AMPLES Cat. No.
Size (mL)
Size (dr)
*Dia x H (mm)
Cap Size
Qty/Case
®
Clear Vials with Solid Top Black Phenolic Teflon Faced 14B Rubber Lined Caps 224740 224741 224742 224744 224745 224746 224748
1.8 2 4 8 12 16 24
3/8 1/2 1 2 3 4 6
12 x 35 12 x 38 15 x 48 17 x 63 19 x 68 21 x 73 23 x 88
8-425 8-425 13-425 15-425 15-425 18-400 20-400
200 200 200 200 200 200 200
Amber Vials with Solid Top Black Phenolic Teflon® Faced 14B Rubber Lined Caps 224750 224751 224752 224754
1.8 2 4 8
3/8 1/2 1 2
12 x 35 12 x 38 15 x 48 17 x 63
* Measurement is taken with cap attached.
1.800.225.1437 (U.S. & Canada only) | +1.856.825.1100 | +1.856.825.1368 (F) | www.wheatonsci.com
8-425 8-425 13-425 15-425
200 200 200 200
6IALS ¬Sample
6IAL¬&ILE
% #¬3AMPLE¬6IALS¬(Without Screw Cap) Cat. No.
Size (mL)
Size (dr)
Dia x H (mm)
Cap Size
Qty/Case
12 x 32 12 x 35 15 x 45 17 x 60 19 x 65 21 x 70 23 x 85 28 x 57 28 x 95 30 x 125
8-425 8-425 13-425 15-425 15-425 18-400 20-400 24-400 24-400 24-400
200 200 200 200 200 200 200 200 200 143
12 x 32 12 x 35 15 x 45 17 x 60
8-425 8-425 13-425 15-425
200 200 200 200
Clear Vials without Screw Caps 224700 224701 224702 224704 224705 224706 224708 W224809 W224810 W226060
1.8 2 4 8 12 16 24 20 40 60
3/8 1/2 1 2 3 4 6 5 10 15
Amber Vials without Screw Caps 224710 224711 224712 224714
1.8 2 4 8
3/8 1/2 1 2
152
• • • • • •
Clear plastic hinged case with 2 or 4 mL vials Convenient for storing and transporting vials Partitions and foam inserts protect vials Includes alphanumerical indexing card Choice of solid or open top screw cap Caps attached to vials
The Vial File® provides a compact, easily accessible means of sample storage. The vials are stored in individual partitions within a clear polystyrene case. Foam inserts provide extra protection for the vials. The alphanumerical indexing card allows for identification of sample vials. The Vial File comes with polystyrene case, partitions, indexing card, and 60 – 2 mL vials or 40 – 4 mL vials. Clear vials are manufactured from Wheaton 33 low extractable borosilicate glass that conforms to ASTM Type I, Class A and USP Type I requirements to protect pH balance and sample integrity. Amber vials are manufactured from Wheaton 320 amber glass that conforms to USP Type I requirements to protect light-sensitive samples. Select from solid or open top black phenolic screw cap with 14B rubber liner for aqueous work and Teflon® faced 14B rubber liner or Teflon faced silicone liner for organic work. Partitions and index cards can also be purchased separately.
6IAL¬&ILE ¬FOR¬!QUEOUS¬3AMPLES Cat. No.
Size (mL)
*Dia x H (mm)
Cap Size
No. of Vials
Qty/Case
With Clear Vial with Solid Top Black Phenolic 14B Rubber Lined Cap 224891 224892
"LACK¬0HENOLIC¬3CREW¬#APS • • • •
W224896 W224897
8-425 13-425
60 40
2 4
12 x 38 15 x 48
8-425 13-425
60 40
Cap Size
Qty/Case
WHEATON
1 1
8-425 13-425 15-425 18-400 20-400 24-400
1000 200 200 500 500 500
8-425 13-425 15-425 18-415 18-400 20-400 24-400 24-400
200 200 200 200 200 100 100 200
The 2 mL vial is graduated every 0.2 mL. The 4 mL vial is graduated every 0.5 mL.
W224894 W224895
2 4
12 x 38 15 x 48
8-425 13-425
60 40
1 1
With High Recovery Polypropylene Vial with Linerless Polypropylene Cap W225100
2
12 x 38
13 mm
60
*Measurement is taken with cap attached.
With Teflon® Faced Rubber Liner W240406 240408 240409 240414 240415 240416 240418 W242711
1 1
With Graduated Clear Vial with Solid Top Black Phenolic 14B Rubber Lined Cap
With 14B White Rubber Liner 240206 240208 240209 240215 240216 240218
12 x 38 15 x 48
With Amber Vial with Solid Top Black Phenolic 14B Rubber Lined Cap
Solid-top black phenolic screw cap Replacement caps for Lab File vials Choice of cap liner Autoclavable
Cat. No.
2 4
Vial File for Organic Samples is located on page 153.
1.800.225.1437 (U.S. & Canada only) | +1.856.825.1100 | +1.856.825.1368 (F) | www.wheatonsci.com
1
153
6IALS ¬Sample/Serum
6IAL¬&ILE ¬FOR¬/RGANIC¬3AMPLES Cat. No.
Size (mL)
*Dia x H (mm)
Cap Size
No. of Vials
Qty/Case
With Clear Vials with Solid Top Black Phenolic Teflon® Faced 14B Rubber Lined Cap W224693 W224694
2 4
12 x 38 15 x 48
8-425 13-425
60 40
1 1
With Amber Vials with Solid Top Black Phenolic Teflon® Faced 14B Rubber Lined Cap W224695 W224696
2 4
12 x 38 15 x 48
8-425 13-425
60 40
1 1
With Graduated Clear Vials with Solid Top Black Phenolic Teflon® Faced 14B Rubber Lined Cap
Cat. No. 228710 without vials
The 2 mL vial is graduated every 0.2 mL. The 4 mL vial is graduated every 0.5 mL.
W224697 W224698
2 4
12 x 38 15 x 48
8-425 13-425
60 40
1 1
With Clear Vials with Open Top Black Phenolic Teflon® Faced Silicone Lined Cap 224950 224952
1-1/2 4
12 x 38 15 x 48
8-425 13-425
60 40
1 1
With Amber Vials with Open Top Black Phenolic Teflon® Faced Silicone Lined Cap W224954 W224955
1-1/2 4
12 x 38 15 x 48
8-425 13-425
60 40
1 1
With Graduated Clear Vials with Open Top Black Phenolic Teflon® Faced Silicone Lined Cap The 2 mL vial is graduated every 0.2 mL. The 4 mL vial is graduated every 0.5 mL.
224961 224962
2 4
12 x 38 15 x 48
8-425 13-425
60 40
1 1
* Measurement is taken with cap attached.
-INI &ILE ¬WITH¬3AMPLE¬6IALS • • • • •
10 vials in a clear plastic reclosable tray Convenient for storing and transporting vials Vials made from Wheaton 33 low extractable borosilicate glass Attached solid top black phenolic screw cap with 14B rubber liner Vials and caps are autoclavable
Clear polystyrene storage case holds 10 vials for convenient storage and transporting of vials. Vials are manufactured from Wheaton 33 low extractable borosilicate glass that conforms to ASTM Type I, Class A and USP Type I requirements. Solid top black phenolic screw caps with 14B rubber liner are attached to vials. Polystyrene case is not autoclavable. Each case contains 5 polystyrene closable trays. Mini-File without vials (Cat. No. 228710) is great for use in shipping or storing vials. Cat. No.
Size (mL)
Size (dr)
*Dia x H (mm)
Cap Size
Qty/Case
224841 224842 228710
2 4 —
1/2 1 —
12 x 38 15 x 48 —
8-425 13-425 —
5 5 5
* Measurement is taken with cap attached.
3ERUM¬6IALS¬
- 4¬6IAL¬&ILE ¬ • • • • •
Clear plastic hinged case for use with 2 and 4 mL vials Convenient for storing and transporting vials Partitions and foam inserts protect vials Includes alphanumerical indexing card Extra partitions and index cards can be purchased separately
The M-T Vial File® provides a compact, easily accessible means of sample storage. The vials are stored in individual partitions within a clear polystyrene case. Foam inserts and partitions provide extra protection for the vials. The alphanumerical indexing card allows for identification of sample vials. The M-T Vial File comes with polystyrene case, partitions, foam inserts and indexing card. Partitions and index cards can also be purchased separately. Cat. No.
Description
Stores
Qty/Case
Complete Vial File without Vials 228778 228780
M-T Vial File M-T Vial File
60 – 2 mL vials 40 – 4 mL vials
6 6
For use with 228778 For use with 228780
60 – 2 mL vials 40 – 4 mL vials
35 35
For use with 228778 For use with 228780
60 – 2 mL vials 40 – 4 mL vials
6 6
For a complete selection of serum vials see page 20, for aluminum seals and rubber stoppers see pages 32-33.
Index Cards 228783 228785
For the Wheaton Uni-Dose® Vial see page 20.
Partitions W228781 W228782
WHEATON
1.800.225.1437 (U.S. & Canada only) | +1.856.825.1100 | +1.856.825.1368 (F) | www.wheatonsci.com
6IALS ÂŹVacules
r Idehaillizfaotion
Lyop 6ACULEÂ&#x161; ÂŹ6IALÂŹ â&#x20AC;˘ â&#x20AC;˘ â&#x20AC;˘ â&#x20AC;˘
Designed for lyophilization and freeze-drying applications 4, 5 and 10 mL size Screw threads eliminate use of crimp seal Choice of solid or open top screw cap
Heavy wall construction designed for lyophilization and freeze-drying. Manufactured from Wheaton 33 low extractable clear borosilicate glass that conforms to ASTM Type I, Class A and USP Type I requirements. Vacule vials have controlled ID, for accurate stopper ďŹ t. Stoppers and accessories listed below. Cat. No.
Size (mL)
Dia x H (mm)
Accepts Cap Finish Size
Fits Rack
Qty/Case
4 5 10
17 x 45 22 x 40 22 x 55
15-425 22-350 22-350
868810 868805 868805
200 200 200
Vacule Vial 651954 651905 651907 Cat. No.
Description
Qty/Pack
Qty/Case
Screw Caps and Stoppers for Cat. No. 651954, 4 mL Vacule 224100-080 224100-093 240209 W240509
Red rubber stopper Lyophilization stopper, 2-Leg Cap, solid top, rubber liner, 15-425 screw thread Cap, open top, without liner, 15-425 screw thread
100 100 200 200
1000 1000 200 200
100 100 100 500
1000 1000 1000 500
Screw Caps and Stoppers for Cat. No. 651905 and 651907, 5 and 10 mL Vacule 224100-172 224100-194 224100-202 239853
Red rubber stoppers Lyophilization stopper, 2-Leg Lyophilization stopper, 3-Leg Cap, solid top, without liner, 22-350 screw thread
7HEATONÂŹISÂŹ9OURÂŹ3INGLEÂŹ3OURCEÂŹFORÂŹ,YOPHILIZATIONÂŹ0RODUCTS ÂŹSee our new Lyophilization Section on pages 107-110. WHEATON
1.800.225.1437 (U.S. & Canada only) | +1.856.825.1100 | +1.856.825.1368 (F) | www.wheatonsci.com
154
155
0RODUCT¬!PPLICATIONS #ELL¬$ISRUPTION¬ ¬0RESERVATION Description of Various Types of Tissue Grinders and Recommended Use...........................156 Preserving Cells with Wheaton Cryule® Cryogenic Vials ........................................... 157-158
#ELL¬'ROWTH Growing Insect and Mammalian Cells with Wheaton MantaRay® Single Use Cell Culture Flask ................................................................................................. 159-160 Primary Culture Preparation with Wheaton Celstir® Cell Culture Flask...............................158 Utilization of Cell Optimizer System® to Determine Growth Conditions of Mammalian and Insect Cells ...........................................................................................................161
-ICRO¬#HEMISTRY Applications using Wheaton Micro Kits® with Wheaton Connections® ....................... 163-164
0IPETTING How to Use a Socorex Pipette........................................................................................162
3LIDE¬0REPARATION Slide Cleaning with Wheaton Staining Dishes .................................................................165 Slide Coating with Silane ..............................................................................................165 Slide Coating with Poly-Lysine .......................................................................................165
WHEATON
1.800.225.1437 (U.S. & Canada only) | +1.856.825.1100 | +1.856.825.1368 (F) | www.wheatonsci.com
0RODUCT¬!PPLICATIONS
156
4ISSUE¬'RINDER¬#HOICE Mortar & Pestle tissue grinders are used for their gentle action, which reduces damage to large molecules, organelles, and viruses or the cells. However, there is a large choice of tissue grinders.
4ISSUE¬'RINDER¬$ESCRIPTIONS¬¬ AND¬2ECOMMENDED¬5SES !BSTRACT There are many methods available to breakdown tissue and cells. Mortar and pestle tissue grinders are commonly used due to their gentle grinding action, which helps to preserve large molecules, organelles, cells, and viruses. General usage and a description of the various types of tissue grinders are described.
7HY¬5SE¬-ORTAR¬ ¬0ESTLE¬4ISSUE¬'RINDERS Mortar and pestle tissue grinders are commonly used for opening cells to isolate proteins, DNA, RNA and antibodies. They are also used to separate cell organelles and viruses from cells. These are often large molecules or objects that are susceptible to damage. Mortar and pestle tissue grinders are gentler than most other grinding methods, so there is greater recovery of intact molecules, organelles, or viruses. In addition, the gentle grinding makes these tissue grinders useful for breaking tissues down for primary cell culture. Mortar & pestle tissue grinders are easy to use. They consist of only a few parts. Most Wheaton tissue grinders are comprised of interchangeable parts, so there is no concern about matching components for correct sizing after washing in busy labs. This also allows for the easy purchase of replacement parts in case of breakage. Because mortar & pestle tissue grinders are often hand-operated, friction is kept to a minimum, which reduces the amount of heat transferred to the sample, increasing yields of cell products.
'ENERAL¬0ROCEDURES Cells collected from cell culture are collected and concentrated if needed. They are ground according to a specific protocol. If a Dounce tissue grinder is used, the protocol refers to a number of strokes. For other grinders, the time and possibly the RPM are specified for grinding. When grinding tissues, the sample is trimmed to remove unwanted material. The tissue is chopped using crossed scalpels to a size of 1-3 mm. These pieces are placed in the tissue grinder. Again, a specific protocol that defines the number of strokes or time period is used. These protocols are determined empirically or a protocol using a similar sample may be used.
WHEATON
Dura-Grind® Stainless Steel Dounce Tissue Grinder
Dounce Tissue Grinder
$OUNCE¬4ISSUE¬'RINDER One of the most popular tissue grinders is the Wheaton Dounce tissue grinder, typically used to open cells to release produced molecules, organelles, or viruses. The Dounce tissue grinder is usually used on cell pellets rather than excised tissue. This tissue grinder works by squeezing cells and suddenly releasing pressure as the pestle is moved. The Wheaton Dura-Grind® Dounce tissue grinder is constructed of stainless steel, and helps to keep the sample cool. Most Dounce tissue grinders are packaged with two mortars. The loose mortar is used for initial grinding, and the procedure is finished with the tight mortar. The two mortars reduce effort. This grinder is inefficient when the mortar is pressed to the bottom of the pestle and rotated. Dounce tissue grinders are used by moving the pestle up and down for a specified number of strokes.
0OTTER¬%LVEHJEM¬4ISSUE¬'RINDER The Wheaton Potter-Elvehjem tissue grinder is a good general-purpose tissue grinder. It can be used to break excised culture down for primary cell culture. This tissue grinder is generally used with soft tissue such as brain and liver. The serrated PotterElvehjem is used to reduce effort because the serrations breakdown the larger pieces first. This tissue grinder works by the shear forces generated by the moving liquid trapped between the stationary mortar and the moving pestle. Potter Elvehjem tissue grinders with a metal shaft may be used with the Wheaton Overhead Stirrer (903475).
4APERED¬4ISSUE¬'RINDER The Wheaton Tapered Tissue Grinder has many uses. Its primary use is to break dissected tissue down. It is commonly used for tougher tissue than the Potter-Elvehjem, such as heart, muscle or lung. The tapered section helps to break down the tissue initially, while the straight portion grinds material via shear forces as in the Potter-Elvehjem grinder. This tissue grinder works by the shear forces generated by the moving liquid trapped between the stationary mortar and the moving pestle. Tapered tissue grinders with a metal shaft may be used with the Wheaton Overhead Stirrer (Cat. No. 903475).
4ENBROECK¬4ISSUE¬'RINDER The Wheaton Tenbroeck tissue grinder has a hollow handle to hold ice water to cool the sample. This feature makes it useful for labile samples, or for preserving cells such as liver, intestines or heart. In addition to fragile cells, this grinder is used for the isolation of molecules.
1.800.225.1437 (U.S. & Canada only) | +1.856.825.1100 | +1.856.825.1368 (F) | www.wheatonsci.com
157
0RODUCT¬!PPLICATIONS !NOTHER¬$EBATE ¬)N¬THE¬6APOR¬OR¬)N¬THE¬,IQUID Although some cryogenic vial manufacturers say that there is no trouble immersing cultures into liquid nitrogen, most researchers advise against the practice. Although the vast majority of vials seal under liquid nitrogen, there is a chance that the liquid can seep into the vial over time. When the vial is warmed, the trapped liquid nitrogen rapidly becomes a gas, exploding the vial and sending sharp fragments across the lab. In addition to the danger from fragments, the contents of the vial may also be scattered, necessitating decontamination. In addition, frozen bacteria can also seep in with the nitrogen, contaminating the culture. The main advantage to storing cultures in the liquid is the sense of security that the cells will stay cold in the liquid, even if the freezer is opened. It is advisable to store the cultures in the vapor layer above the liquid. The cells will remain cold provided that proper techniques are applied to opening and closing the freezer. A system should be in place so that cultures can be easily found in the freezer, limiting the time the freezer and cultures are disturbed.
0RESERVING¬#ELLS¬WITH¬7HEATON¬ #RYULE ¬#RYOGENIC¬6IALS !BSTRACT Cell preservation is an extremely important aspect of cell culture. The only effective means of preserving animal cells is by freezing, using either liquid nitrogen or cryogenic freezers. This product application provides a general description for freezing cells and lists materials needed.
2EQUIRED¬-ATERIALS¬ •
Sterile DMSO or Glycerol (see text for sterilization techniques)
•
Culture Media
•
Wheaton Glass or Plastic Cryules®
"ACKGROUND Preserving cultured cells differs from preserving bacteria and fungi in that higher viability is required. While a 1% survival rate of a microbial culture is practical, such low viability is unacceptable for cell culture. High survival rates are important for cell lines due to the expense and difficulty in preparation, slow rate of growth, and the tendency to change during culture. Consequently, methods used for cell culture cryopreservation must ensure high viability.
)NTERNAL¬OR¬%XTERNAL¬4HREADING ¬4HE¬'REAT¬$EBATE Internally threaded Cryule® vials are perceived to hold a better seal because outside dimensions of the cap and vial are equal. This means that under equal temperature, the cap and vial have expanded the same amount, so the seal should be better. Also, internally threaded vials generally have a silicone seal that is perceived to keep liquid nitrogen out of the vial if it is immersed in the liquid. This makes internally threaded vials popular for long term storage. In practice, the contraction going into liquid nitrogen is so small that it doesn’t strain the seal. Although many manufacturers suggest that internally threaded vials can be immersed into liquid nitrogen without harm, many of them sell a sleeve for their vials to prevent liquid nitrogen from entering the seal! Externally threaded vials, while not as popular for long-term storage, have the advantage that the threads are protected from the environment, reducing the risk of contamination to the culture. The external threading also allows filling to a greater extent than internally threaded vials. WHEATON
0ROCEDURE Cryoprotectants - choice & sterilization Cryoprotectants such as DMSO and glycerol are used to prevent cell dehydration while freezing. The cell suspension is generally prepared at a concentration twice that desired for freezing so that an equal volume of cryopreservative can be added. Gentle handling techniques during harvest and concentration will greatly enhance the viability of recovered cells. Excessive enzyme treatment, vigorous pipetting, and excessive centrifugation will reduce the viability of the cells. Generally, cell viability should be greater than 90% prior to freezing. The diffusion of cryoprotective agents such as glycerol or dimethylsulfoxide (DMSO) into a cell will partially replace intracellular water and help prevent dehydration due to ice formation while freezing. Glycerol stabilizes proteins in their native states. The cryopreservative should be prepared separately by combining the cryoprotective agent and the growth medium for the cells. Cryoprotective agents are usually used individually in concentrations ranging from 5-15% (v/v) with the optimum changing with cell type. Use the highest quality cryoprotective reagents, and sterilize them before use. Glycerol can be sterilized by autoclaving for 15 minutes and stored in small aliquots to prevent contaminants into the bulk material. DMSO is sterilized by filtration with a 0.2 um nylon syringe filter then stored at -20°C in small, single-use sealed aliquots. Air oxidation of DMSO is rapid and these oxidation products are toxic to cells. Cells mixed with cryopreservative require an equilibration time at room temperature prior to freezing. This equilibration period ranges from 15 to 45 minutes and allows the cryopreservative to penetrate the cell for maximum protection.
3EALING¬'LASS¬#RYULES Glass Cryules® are sealed with a flame by rolling the sealing neck of the Cryule® in a flame until it becomes soft and pliable. Use forceps to slowly pull the sealing neck of the Cryule® while continuing to roll the tube. As the top of the sealing neck separates from the vial, roll the tip of the Cryule® in the flame to seal. After the Cryule® has cooled, it can be submersed in a solution of methylene blue or trypan blue in order to check that the Cryule® has sealed. Wash the Cryule to remove the stain and examine the cell suspension for the dye. Any dye on the inside of the Cryule® means the vial was not sealed and should be discarded.
)NITIAL¬&REEZING¬ ¬3TORAGE The rate of cooling controls the size of the ice crystals and the rate at which they are formed, both of which affect cell recovery. In most cases
1.800.225.1437 (U.S. & Canada only) | +1.856.825.1100 | +1.856.825.1368 (F) | www.wheatonsci.com
0RODUCT¬!PPLICATIONS a slow, uniform cooling rate of -1°C per minute from ambient works well. Placing the vials in a disposable plastic polystyrene rack on the shelf of an -80°C freezer for 2-3 hours is close to 1°C per minute and works well for a range of cell types. After initial cooling, the cells are placed in the storage freezer. For Glass Cryule® vials use Wheaton Plastic Racks on page 142. Tilt the Glass Cryule® in the rack so the culture freezes at a slant. This reduces the chance of the expanding ice cracking the Cryule®. Whether using Wheaton plastic or glass Cryules®, simply leaving the culture in the -80°C freezer overnight is a good way to initially freeze the cells. The temperature at which frozen cells are stored will affect their viability. Storage at -80°C may permit slow chemical reactions to occur from the presence of small amounts of unfrozen water, resulting in cell death. Cells should be stored at a temperature less than -150°C.
4HAWING In contrast to freezing, rapid thawing of cells is needed to maintain viability. When removing vials from the freezer, insulated gloves should be worn to protect you from burns from the low temperatures. Though specially designed Cryules® are used to store cells, a face shield and a laboratory coat are recommended to protect you against unexpected explosions. Directly after removal from storage, vials should be thawed with agitation, except for fragile hybridoma cells, in a 37°C water bath. As the last ice crystals melt, remove the vial from the water. Wipe, spray, or submerse the vial with 70% ethanol before opening it in a biosafety hood. You can determine the percentage of viable cells recovered by trypan blue staining.
Neurons are generally obtained from primary tissue and dissociated to individual cells using a combination of chemical and mechanical techniques. For example, Martin1 et al placed brain slices from male Spraque-Dawley rats into a Jacketed Celstir® flask containing HEPES buffer, papain, NaCl, KH2PO4, glucose, glutathione, nitro-arginine, kynurenic acid, and pyruvic acid. The cells were digested at 36°C by circulating water in the jacket of the flask. The cells were rinsed, and further triturated with Pasteur pipettes with successively smaller tip diameters. This is similar to the technique used by D. James Surmeier2. The cells were dissociated in HEPES buffered Hank’s Balanced Salt Solution. After digestion, the cells were triturated with graded Pasteur pipettes.
0RIMARY¬#ULTURE¬0REPARATION¬¬ WITH¬7HEATON¬#ELSTIR ¬¬ #ELL¬#ULTURE¬&LASK
Myocytes Haneda3 et al dissociated myocytes in a Wheaton water jacketed Celstir® in a solution containing trypsin, chymotrypsin, and elastase in HEPES buffered Hank’s salt solution at 37°C. The tissue was minced prior to dissociation in the flask.
!BSTRACT
Tessier4 et al started primary decidual cell culture from tissue obtained from pseudo-pregnant rats. The tissue was incubated in a water-jacketed Celstir® flask at 37°C in RPMI 1640 medium supplemented with collagenase and deoxyribonuclease.
Wheaton Science Products Celstir® Cell Culture Flasks are most commonly used for growing cells in culture, but are widely used to prepare cells, especially neurons, for other cell preparation. Celstir® flasks are useful for preparing cells because they can be closed to maintain sterility of the culture. Jacketed flasks can also be used to maintain the optimal temperature for the cells, saving incubator space and reducing the disturbance to other cultures while preparing primary cultures.
"ACKGROUND A wide number of researchers have used the Wheaton Celstirs® to prepare cells for other cultures. Generally, the spinner flask is used to gently agitate the cells in culture medium with a trypsinizing agent added. The cells are often prepared with Jacketed Celstir® flasks because of the ease in maintaining optimal conditions for the cells by regulating the temperature of the water flowing through the jacket. Typically, 25-50 mL flasks are used for cell preparation.
Decidual Tissue
#ONCLUSION Wheaton Celstir® flasks are an excellent alternative to trypsinizing flasks for small volumes of cell culture. They can be sealed against contamination with the caps that are provided with the flasks, and stirring is done with a magnetic stirrer. The flasks may be placed in an incubator, or jacketed flasks can be used to maintain the cells at optimal temperature. Use of jacketed flasks reduces the demand for incubator space and eliminates disturbance of other cell cultures from the continual opening and closing of the incubator during primary cell culture preparation. Wheaton Celstir® flasks can be used for a variety of cells and the cultures can be grown in larger Celstir® flasks after the cells are dissociated. 1 Martin, G; Fabre, V; Siggins, G.R.; de Lecea, L Interaction of the hypocretins with neurotransmitters in the nucleus accumbens. Reg. Peptides 104 111-117, 2002 2 Yan, Z; Surmeier, D.J. D5 Dopamine Receptors Enhance Zn2+-Sensitive GABAA Currents in Straital Cholinergic Interneurons through a PKA/PP1 Cascade. Neuron 19 1115-1126 1997
0ROCEDURES Neurons Neurons are adherent cells that do not generally grow in suspension culture. Neurons are generally cultured for a short period of time on slide cover slips or small dishes, where they are manipulated and observed.
WHEATON
158
3 Oi, S; Haneda, T; Osaki, J; Kashiwagi, Y; Nakamura, Y; Kawabe, J; Kikuchi, K. Lovastatin prevents angiotensin II-induced cardiac hypertrophy in cultured neonatal rat heart cells. Eur. J. Pharmacology 376 139-148, 1999 4 Prigent-Tessier, A; Tessier, C; Hirosawa-Takamori, M; Boyer, C; Ferguson-Gottschall, S; Gibori, G, Rat Decidual Prolactin – Indentification, Molecular Cloning, and Characterization, Journal Bio Chem, Vol 274, 37982-37989, 1999
1.800.225.1437 (U.S. & Canada only) | +1.856.825.1100 | +1.856.825.1368 (F) | www.wheatonsci.com
159
0RODUCT¬!PPLICATIONS 'ROWING¬)NSECT¬AND¬-AMMALIAN¬#ELLS¬WITH¬ -ANTA2AY ¬3INGLE¬5SE¬#ELL¬#ULTURE¬&LASK !BSTRACT The MantaRay® is a new and unique cell culture flask for insect and mammalian cells. The flask shows equivalent growth to conventional spinner flasks for both insect and mammalian cells, having been tested on CHO, HeLa, SF-9 cells, 293, and Burkitts lymphoma cells. Data is presented for SF-9 and HeLa cells.
%XPERIMENTAL SF9 Cells
"URKITTS¬,YMPHOMA
1 ml SF-9 seed was planted in 100 mL media (supplemented with 50 μg/ml gentamycin) in a 250 mL spinner flask and allowed to grow at 27°C (80 RPM). When the cell density was greater than 106 cells/ml, the culture was split to 600 mL in a one-liter spinner flask. The spinner flask was arranged so as to continuously feed fresh 0.2 μm filtered air into the headspace using an air pump, stirring at 80 RPM. When the cell count again reached greater than 106 cells/mL, the culture was split 1:5 by transferring 200 mL culture to 800 mL media that was already temperature equilibrated in two 1 liter MantaRay® flasks and a single 1 liter glass spinner. The three spinners were attached to the air pump via a manifold intended to distribute the air to the headspace of the spinner flasks. Cell count and viability was determined daily using a hemacytometer and trypan blue staining. The cultures were terminated when the viability dropped below 80%.
1 mL Burkitts Lymphoma seed was propagated in RPMI 1640 (supplemented with 10% Fetal Calf Serum and 50 μg/ml gentamycin) at 37°C, 5% CO2 and 80 RPM. It was sequentially split to a volume of 600 mL at which time it was split to the two MantaRay® flasks and one glass spinner as detailed above. The three spinners were attached to the air pump (which was placed inside a 5% CO2 environment) via a manifold intended to distribute the CO2/air to the headspace of the spinner flasks. Cell count and viability was determined daily using a hemacytometer and trypan blue staining. The cultures were terminated when the viability dropped below 80%.
WHEATON
1.800.225.1437 (U.S. & Canada only) | +1.856.825.1100 | +1.856.825.1368 (F) | www.wheatonsci.com
0RODUCT¬!PPLICATIONS #(/
(%+¬
CHO-S from Gibco/Invitrogen was used, grown in serum free media from Gibco. These cells are routinely grown in shake flasks at 125 RPM, 37°C, 8% CO2 which is very close to the suppliers instructions. The cells were passaged by diluting them to 2e+5 cells/mL twice a week. The cultures were seeded into both the MantaRay® and a parallel shake flask. A small aquarium pump was used to force incubator air into one of the ports on the top (using a 0.22 μm filter). The other port was used as a vent with a 0.22 μm filter.
FreeStyle 293 from Gibco/Invitrogen was grown in serum free media, also from Gibco. The initial culture was grown in shake flasks at 125 RPM, 37°C, 8% CO2. The cells were passaged by diluting them to 2e+5 cells/ mL twice a week. The cultures were then seeded into both the MantaRay® and a parallel shake flask. A small aquarium pump was used to force incubator air into one of the ports on the top (using a 0.22 μm filter). The other port was used as a vent with a 0.22 μm filter.
2ESULTS The MantaRay® showed similar or superior growth and cell viability compared to standard spinner flasks. The MantaRay® shows equal growth compared to standard glass spinner flasks for both HeLa and SF-9 cells. The MantaRay® has also demonstrated excellent results for CHO, 293, and Burkitts lymphoma cells. The MantaRay® has the advantages of being ready for use out of the package, as it is gamma sterilized and comes complete with a magnet. The MantaRay® is unbreakable, and since it doesn’t require cleaning, saves time and effort in the lab. The unique stirrer provides gentle, efficient mixing, while reducing stress to cells.
WHEATON
1.800.225.1437 (U.S. & Canada only) | +1.856.825.1100 | +1.856.825.1368 (F) | www.wheatonsci.com
160
161
0RODUCT¬!PPLICATIONS
5TILIZATION¬OF¬#ELL¬/PTIMIZER¬3YSTEM ¬TO¬ $ETERMINE¬/PTIMAL¬'ROWTH¬#ONDITIONS¬ OF¬-AMMALIAN¬AND¬)NSECT¬#ELLS !BSTRACT¬ The optimization of growth and production parameters is one of the more critical concerns of cell culture research. Although the most important optimization efforts are directed to the production of desired cellular products, the next most important concern is the production of the maximum number of cells. The Cell Optimizer System® was used to determine the optimal pH growth conditions for the HFN 7.1 hybridoma cell line.
-ATERIALS¬AND¬-ETHODS The Cell Optimizer System® was used for the experiments described below. The Cell Optimizer System® is a small (250 mL to 3 L) stirred tank bioreactor. The experimental parameters of pH, temperature, and DO were regulated and controlled using the Control Tower™ equipped with a 4-gas control system. The vessel was stirred with a flat-blade PTFE impeller, using a manually set stirring rate. Data was collected at 10 minute intervals using the BioPro™ data acquisition software. The HFN 7.1 hybridoma cell line (ATCC, CRL 1606) was used to evaluate a pH optimization protocol. This line was propagated in DMEM/F12 (1:1) (Paragon Biotech, Baltimore, MD) containing 2% FBS (fetal bovine serum). Seed cultures were propagated continually in T-75 flasks in the same medium. The Cell Optimizer System® was filled with 900 mL medium. The environmental parameters were allowed to equilibrate to the following values: 37°C; 50% DO; 50 RPM. The pH was set specific to the study. All cultures were seeded at ~105 cells/mL. Each study was run for 5 days. Cell densities were determined using a hemacytometer.
2ESULTS Optimization of pH for HFN 7.1 HFN 7.1 shows a pH shift of 0.8 to 1 pH units towards acid from a starting pH of 7.4. The cell line appears stable at this low pH, causing some users of this cell line to assume that the optimum pH for this cell line to be pH 6.8. To determine the optimal pH, this cell line was cultured at four pH values ranging from pH 6.8 to 7.4 in 0.2 pH unit increments. The data showed that pH 7.2 provided the maximum growth rate and cell density. WHEATON
#ONCLUSION The Cell Optimizer System® can easily be used to design and execute culture optimization protocols, avoiding elaborate setup problems that exist with other bioreactors. This system provides simplicity, but also possesses the full complement of environmental controls. The Cell Optimizer System® was also able to maintain the pH of the culture system, despite the tendency of the culture to shift to a more acidic pH mentioned earlier.
1.800.225.1437 (U.S. & Canada only) | +1.856.825.1100 | +1.856.825.1368 (F) | www.wheatonsci.com
0RODUCT¬!PPLICATIONS (OW¬TO¬5SE¬A¬3OCOREX¬0IPETTE !BSTRACT Pipettes are precision tools that, when used properly, will provide years of trouble-free service. However, many users do not receive training to use this common laboratory utensil.
0ROCEDURE Your Socorex Pipettes are precision tools that will help you efficiently perform your research and testing tasks. Like any tools, your pipette should be used and stored with care to provide the best possible results. The information here will apply to pipettes from other manufacturers, as well as your Socorex pipettes. All air displacement pipettes work on the same principle. A plunger is used to displace air- when the plunger is returned to its initial position (upper stop); it creates a vacuum that is used to draw liquid into the disposable tip. The pipette is calibrated such that the vacuum draws a volume of water as indicated on the volume setting. The vacuum is unable to draw liquids heavier than water to the same volume as the same mass of water. Lighter liquids than water are pulled further into the tip, so these liquids will pipette to a larger volume. In the case of either lighter or heavier liquids, compared with water, the volume dispensed will be different than that indicated on the pipette. Pushing the plunger pushes air, which then pushes on the liquid in the tip, which is dispensed. It is important that you use approved tips with your pipettes to assure accuracy. Using unapproved tips may lead to inconsistent results.
.ORMAL¬0IPETTING 1. Fit the tip, set the volume (variable pipettes only), and press down the pipetting plunger to the first stop (metering stroke) with your thumb. Immerse the tip 2-3 mm in the sample while holding the pipette ertically. 2. Slowly retract the pipetting plunger while watching the liquid fill the tip. You should not observe bubbles or turbulence, which indicate gasses being pulled from the liquid. These gasses reduce the vacuum that draws the liquid, reducing the amount of liquid aspirated into the pipette tip. 3. When the pipetting plunger has been retracted to its upper stop, remove your thumb since the absence of pressure increases the precision of the pipette. Slowly withdraw the pipette from the liquid. Wipe any drops on the outside of the tip on the wall of the vessel you are drawing liquid from. 4. To dispense the liquid, hold the tip against the side of the receiving container at a slight angle. Use your thumb to push down the pipetting plunger to the first stop, and hold it for one second. Wait one second, then push the button to the second stop. Pushing to the second stop blows out any liquid left in the tip. For work with volatile solvents, such as methanol, you may perform this procedure on a “dummy” sample to saturate the system with vapor. This may improve accuracy, as presaturating the air will reduce the tendency to “blow out” the liquid before you are ready to dispense the sample. You should saturate the tip in this fashion every time you change tips.
WHEATON
2EVERSE¬0IPETTING Reverse pipetting is used to aspirate an additional volume of liquid. This technique is useful when working with thick, viscous liquids. This is also useful for volatile solvents. 1. Press the pipetting plunger with your thumb to the second stop. This is different from the procedure listed above for regular operation. 2. Holding the pipette vertically, slowly retract the plunger to its upper stop. Wait for the liquid to properly fill the tip. With viscous liquids, this will take longer than when pipetting water. A larger amount of liquid will be aspirated than normal operation since the plunger was pushed to the second stop. 3. When dispensing, push the plunger only as far as the first stop. Wipe any liquid hanging on the tip on the side of the receiving container. Any remaining liquid will be discarded with the tip.
7ORKING¬0OSITION When aspirating the sample, the pipette must be held vertically, or else too much liquid will be drawn in. Tilting the pipette means the vacuum caused by lifting the plunger works less hard to draw liquid, so it draws more liquid than calibrated. Tilting the pipette by 30 degrees causes nearly 1% more liquid to be drawn! When dispensing the sample, the tip should be held at an angle against the container to draw out the liquid in the tip. Under normal pipetting operations, analytical chemists will recognize the pipette as a “to contain” pipette. When aspirating the sample, the tip should generally be immersed to 2-3 mm. Placing the tip deeper into the sample allows pressure from the liquid to help push sample into the tip, reducing accuracy.
7ORKING¬#ONDITIONS Under ideal conditions, the sample should the same temperature used to calibrate the pipette. Cold liquids are denser than warm liquids. If the pipette was calibrated at room temperature, but used in a cold-room, smaller samples than expected would be dispensed.
3TORAGE Pipettes should be stored in an appropriate rack or stand. This reduces the risk of scratching or damaging the nose cone. Damage to the nose cone could result in a poor seal to the pipette tip, which will reduce accuracy.
4ESTING¬ ¬#ALIBRATION You should periodically check the operation of your pipette by checking its calibration. Socorex air-displacement pipettes are warranted for calibration for 2 years. Under modern quality management such as GLP/GMP, ISO-9000, or regulatory requirements, you should test your pipettes’ calibration. If your pipette is dropped, or you suspect any type of damage, you should check your pipette’s calibration. Testing is generally performed gravimetrically, using an analytical balance. Calibration is usually done at room temperature, away from drafts or direct sunlight. The actual calibration details vary between pipettes, and are listed in the pipette instructions.
1.800.225.1437 (U.S. & Canada only) | +1.856.825.1100 | +1.856.825.1368 (F) | www.wheatonsci.com
162
163
0RODUCT¬!PPLICATIONS 3TEAM¬$ISTILLATION
!PPLICATIONS¬5SING¬7HEATON¬-ICRO¬ +ITS ¬WITH¬7HEATON¬#ONNECTIONS
An external source of steam is directed to the base of the flask. This can be from an additional boiling flask or a steam line at the bench. Apparatus is useful in isolating essential oils from natural products and can be an alternative to extraction procedures. The Thermometer and Pasteur pipette (Cat. No. 357331) pictured are not included.
!BSTRACT Wheaton Micro Kits are used for a number of different experiments. These kits are successfully employed in both industrial and student lab settings because the apparatus is easy to assemble and use. In addition, disposable sample vials (Cat. No. 224888 or 224952) can be used as both reaction and storage vessels, reducing cleanup costs. A number of different setups are described along with the required materials.
0ROCEDURES 2EmUX¬ ¬¬ 7ATER¬*ACKETED¬#ONDENSER¬ Reflux type reactions may be run for periods of several hours, utilizing a reaction flask (Cat. No. 434320) and a water jacketed condenser (Cat. No. 333927). An air condenser (Cat. No. 265318) may also be used for this assembly. A drying tube having a Teflon® filter and support for the desiccant is illustrated.
Uses the following items: Cat. No.
Description
434320 125480 110008 W986294NG
10 mL flask with 20-400 cap Wheaton Connection® 13-425 to 20-400 (2 required) Claison condenser, 13-425 threads 1 mL Graduated V Vial® with 13-425 cap O-Ring included with kit Use the open face cap to hold the Pasteur pipette (357331)(not included) (2 required) Connecting adapter, 13-425 screw threads Cap used to hold thermometer (not included) Water Jacketed condenser, 13-425 threads Hose Connectors (2) Wheaton Connection® 13-425 to 13-425 finish (3 required) Vacuum adapter 13-425 and 20-400 connections
WF033112 224952 333927 962515 125478 168378
Optional for Vacuum Distillation: Cat. No.
Description
962515
3rd Hose Connector, purchased separately (2 Hose Connectors are included in the kit)
Uses the following items: Cat. No.
Description
434320 125480 333927 962515
10 mL flask with 20-400 cap Wheaton Connection® 13-425 to 20-400 Water Jacketed condenser, 13-425 threads Hose Connectors (2)
3HORT¬0ATH¬$ISTILLATION Semi-micro mixtures can be distilled using the short path system illustrated. The distillation can be run at atmospheric pressure or under vacuum if necessary. Sub-boiling separations can be effected by heating up to the boiling point, and placing the receiver V Vial® in a cold bath, i.e., dry ice/acetone or liquid nitrogen.
Optional for Drying Tube: Cat. No.
Description
125478 420836 265318
Wheaton Connection® 13-425 to 13-425 finish Teflon® filter with support Air condenser/drying tube/chromatography column, 50 mm, 13-425 threads
$ISTILLATION This is the basic setup to distill at atmospheric pressure or under vacuum. This is often referred to as “simple distillation.” If “fractional distillation” is required, air condenser (Cat. No. 265318) which is packed with stainless steel or glass wool is inserted between the flask and connecting adapter.
Uses the following items: Cat. No.
Description
434320 125480 W986294NG
10 mL flask with 20-400 cap Wheaton Connection® 13-425 to 20-400 (2 required) 1 mL Graduated V Vial® with 13-425 cap O-Ring included with kit Use the open face cap to hold the thermometer (not included). Connecting adapter, 13-425 screw threads Wheaton Connection® 13-425 to 13-425 finish Vacuum adapter 13-425 and 20-400 connections Hose Connector
WF033112 125478 168378 962515
Uses the following items: Cat. No.
Description
434320 125480 WF033112 W986294NG
10 mL flask with 20-400 cap (2 required) Wheaton Connection® 13-425 to 20-400 Connecting adapter, 13-425 screw threads 1 mL Graduated V Vial® with 13-425 cap O-Ring included with kit Use the open face cap to hold the thermometer (not included). Water Jacketed condenser, 13-425 threads Hose Connectors (2) Wheaton Connection® 13-425 to 13-425 finish (2) Vacuum adapter 13-425 and 20-400 connections
333927 962515 125478 168378
For Wheaton Micro Kits see pages 70-72.
Optional for Vacuum Distillation: 962515
3rd Hose Connector, purchased separately (2 Hose Connectors are included in the kit)
WHEATON
1.800.225.1437 (U.S. & Canada only) | +1.856.825.1100 | +1.856.825.1368 (F) | www.wheatonsci.com
0RODUCTÂŹ!PPLICATIONS
164
-OLECULARÂŹ$ISTILLATION Claisen adapter (Cat. No. 110008) is inverted and can be used for bulb-to-bulb distillations. The mixture to be separated is placed in a 4 mL vial (Cat. No. 224952) and assembled as shown. The vial is heated but not to the boiling point and condensation promoted by reducing the temperature of the receiver. A small Dewar ďŹ&#x201A;ask with dry ice/alcohol or liquid nitrogen is used on the receiver side. The thermometer pictured is not included with the kit.
Uses the following items: Cat. No.
Description
110008 224952 125478 W986294NG WF033112
Claisen adapter 4 mL vial with 13-425 cap Wheaton ConnectionÂŽ 13-425 to 13-425 thread (2 required) 1 mL Graduated V VialÂŽ with 13-425 cap O-ring included with kit Connecting adapter, 13-425 screw threads
(ICKMANÂŹ4YPEÂŹ$ISTILLATION This classic design is well suited for simple microscale type distillations. The Hickman still has features that make it a good choice for substances having different boiling points. Unlike reďŹ&#x201A;ux type reactions, the condensate does not return to the ďŹ&#x201A;ask; it is retained in the alembic portion of the still. An air condenser may be attached to the upper section to increase the area for condensation if needed.
Uses the following items: Cat. No.
Description
W986299NG 125480 620189
5 mL Graduated V VialÂŽ with 20-400 cap Wheaton ConnectionÂŽ 13-425 to 20-400 Hickman still, 13-425 and 20-400 connections Cap from 986299 to hold thermometer O-ring to hold thermometer (thermometer not included)
-ICROÂŹ2EACTION #ONCENTRATIONÂŹ!PPARATUS Small quantities of reactant can be added to the boiling ďŹ&#x201A;ask using a syringe (not included). Solvent vapors are condensed and collected in the receiver ďŹ&#x201A;ask. This operation is similar to a rotary evaporator.
Uses the following items: Cat. No.
Description
W986294NG 125478 434320 125480 333927 962515
1 mL Graduated V VialÂŽ with 13-425 cap Wheaton ConnectionÂŽ, 13-425 to 13-425 (3 required) 10 mL ďŹ&#x201A;ask with 20-400 cap Wheaton ConnectionÂŽ, 13-425 to 20-400 Water jacketed condenser, 13-425 connection Hose connectors, 13-425 connection (2 required)
Optional for Drying Tube: Cat. No.
Description
125478 265318 420836
Wheaton ConnectionÂŽ, 13-425 to 13-425 Air condenser/drying tube/column 13-425 connections TeďŹ&#x201A;onÂŽ ďŹ lter with support (holds desiccant)
-ICROÂŹ#ONCENTRATION Concentration of solute may be done within the V VialÂŽ, avoiding a transfer. Connect the vacuum adapter (Cat. No. 168378) with a connector and attach hose connectors as shown. Introduce nitrogen or argon through the uppermost ďŹ tting and use the other ďŹ tting for venting. Solvent can be recovered if PTFE tubing is coiled within an ice bath.
Uses the following items: Cat. No.
Description
W986294NG 125480 168378 962515
1 mL Graduated V VialÂŽ with 13-25 cap Wheaton ConnectionÂŽ 13-425 to 20-400 Vacuum adapter with 13-425 and 20-400 threads Hose Connectors, 13-425 threads (2 required)
-ICROÂŹ#ENTRIFUGEÂŹ6IAL -ICROÂŹ&REEZEÂŹ$RYÂŹ5NIT -ICROÂŹ2EmUXÂŹ volumes less than 1.0 mL Micro product V VialÂŽ is used with an air condenser (Cat. No. 265318 or 265320) with connector (Cat. No.125478) and magnetic stirrer to react and condense the solvent in the extended upper portion of the vial. Biological products may be attached to the freeze dryer if the TeďŹ&#x201A;onÂŽ; support and ďŹ lter (Cat. No. 420836) are used within the connection. Small volumes can be centrifuged within the vial if necessary.
Uses the following items: Cat. No.
Description
W986294NG 125478 265318 265320
1 mL Graduated V VialÂŽ Wheaton ConnectionÂŽ, 13-425 to 13-425 Air condenser/drying tube/column, 50 mm, 13-425 connection Air condenser/drying tube/column, 100 mm, 13-425 connection
Optional for Freeze Drying:
WHEATON
Cat. No.
Description
420836
TeďŹ&#x201A;onÂŽ ďŹ lter with support cap from 986294
1.800.225.1437 (U.S. & Canada only) | +1.856.825.1100 | +1.856.825.1368 (F) | www.wheatonsci.com
165
0RODUCT¬!PPLICATIONS
3LIDE¬#LEANING
3LIDE¬#OATING
3LIDE¬#OATING
WITH¬7HEATON¬3TAINING¬$ISHES
WITH¬3ILANE
WITH¬0OLY ,YSINE
Abstract
Abstract
Abstract
Clean microscope slides are important for all areas of microscopy. Even pre-cleaned slides can carry a significant amount of oil or lint, even from a freshly opened box.
Silane coatings are used for paraffin sections, frozen sections and in situ hybridization. A quick & easy procedure is provided to coat microscope slides with a silane coating.
Wheaton staining dishes offer a convenient method to efficiently clean a number of slides as an initial preparation for coating slides or for microscopy.
Materials and Methods
Coating slides with Poly-Lysine allows binding of DNA and certain proteins. A Poly-Lysine coating also promotes cell adhesion to slides for culturing or experiments, such as calcium ratio imaging. Wheaton staining dishes offer a convenient method for efficiently coating a number of slides.
Materials and Methods Material
Quantity
Cat. No.
Glass Microscope Slides 60 30-Slide Rack, Stainless Steel 1 Staining Dish & Cover 2 Double Distilled Water 5 liters Solid NaOH 70 g 95% Ethanol 420 mL Drying Oven* 1 Orbital Shaker 1
— 900234 900303 — — — — —
*45°C-vacuum oven preferred
Material
Quantity
Cat. No.
Staining Dish & Cover 3 20 Slide Rack, Glass 3 2% 3-aminopropyltriethoxysilane (AES) in acetone* 500 mL Double-Distilled water 500 mL Acetone 500 mL
900303 900304
*Keep this in a fume hood
Procedure 1.
Prepare 2% 3-aminopropyltriethoxysilane (AES) in acetone (do this under a fume hood).
2.
Clean slides as described in the Slide Cleaning Product Application Note.
3.
Place slides in a slide rack, and rinse slides in a staining dish with acetone. Move the rack of slides to a staining dish containing 2% AES in acetone. (Note - dedicate this staining dish for the AES solution. Do not use it for anything else). The slides will need 5 to 15 minutes in this solution.
Procedure 1.
Prepare the cleaning solution by dissolving 70 g NaOH in 28 mL double distilled water. Add 420 mL 95% ethanol. If the solution is cloudy, add double distilled water until the solution clears.
2.
Place the slides in a stainless steel rack and the rack in the staining dish. Pour the cleaning solution from Step 1 over the slides so the slides are covered. Cover the staining dish with a glass lid, and put the staining dish with slides on the orbital shaker to mix for 2 hours.
3.
4.
Transfer the slides to a fresh staining dish filled with double distilled water. Rinse the slides by plunging them in the water several times. Repeat the rinse at least 4 times, using fresh double distilled water for each rinse. It is critical to remove all traces of Ethanol-NaOH. If you are not coating the slides, place the slides in a slide rack in an oven at 45°C. Use of a vacuum oven is optional. Protect the slides from dust in the air by rinsing all glassware prior to use, and by keeping all solvents, slides and staining dishes covered.
— — —
4.
Rinse slides by dunking 4 times in fresh acetone. Repeat this wash step 2 times with fresh acetone.
5.
Rinse slides by dunking them into a staining dish containing fresh double distilled water.
6.
Dry slides overnight in a dust free environment. They can be dried in a vacuum oven. These slides can be kept for up to 6 months in a dust-free plastic box.
Materials and Methods Material
Quantity
Cat. No.
30-Slide Rack, Stainless Steel 2 900234 Staining Dish & Cover 4 900303 Poly-Lysine solution (0.1% w/v) 70 mL Available commercially Tissue Culture PBS 70 mL — Double-Distilled water 2L — Amber HDPE bottles 1000 mL 209130 Drying Oven* 1 — Orbital shaker 1 — Centrifuge 1 — Dust-free plastic containers to hold slides — *45°C - vacuum oven preferred
Procedure 1. Prepare the poly-lysine by adding 70 mL of poly-lysine to 70 mL of PBS solution and 560 mL water. Store in an amber HDPE bottle (209130). 2. Clean slides as described in the Slide Cleaning Product Application Note. Place an equal number of slides in each of two stainless steel slide racks. 3. Transfer slides to the polylysine solution and shake for 15 minutes to 1 hour. 4. Transfer the racks of slides to fresh staining dishes filled with fresh double-distilled water. Plunge up and down at least 5 times to rinse the slides. 5. Centrifuge slides on a microtiter plate carrier at 500 RPM for 5 minutes. Place paper towels under racks to absorb moisture. Use two racks of slides to balance the centrifuge. 6. Place the racks of slides in clean staining dishes with covers for transport to vacuum oven. Place the dishes in the oven at 45°C for 10 minutes. Vacuum is optional. 7. Store the slides in a plastic slide box without a rubber mat bottom. Numerous users commented that slides should be stored for 14 days before spotting DNA. Slides are best when used within 4 months.
WHEATON
1.800.225.1437 (U.S. & Canada only) | +1.856.825.1100 | +1.856.825.1368 (F) | www.wheatonsci.com
4ECHNICALÂŹ$ATA
166
We compiled this section of the catalog to give our customers more technical information on our products. If you need more information than whatâ&#x20AC;&#x2122;s listed in these pages, please contact our Technical Service staff.
Steve Smith, a 35 Year Veteran of Wheaton
4ECHNICALÂŹ!SSISTANCE Give us a call if you need technical assistance 1.800.225.1437 (U.S. & Canada Only) I +1.856.825.1100 Business hours: 8:00 AM to 5:00 PM EST in U.S.A.
Kirsti Dare, a 28 Year Veteran of Wheaton
7HEATON ÂŹ Your Source for Glass and Plastic Containers and Laboratory Equipment
#HEMICALÂŹ#APABILITYÂŹ#HART ..........................................Inside Back Cover
'LASSÂŹ#APABILITIES
#LOSURESÂŹ
Wheaton Science Products is a leading supplier of glass containers for the laboratory. We understand well the importance of protecting the quality of the most sensitive materials. We offer a broad range of both molded and tubing based glass containers and vials. Over the years we have developed thousands of containers of different conďŹ gurations and sizes. Containers and vials can be supplied in different glasses, clear and amber with different neck ďŹ nishes both with and without closures for your many applications. If a standard container doesnâ&#x20AC;&#x2122;t exist to ďŹ t your unique needs, we can probably create one to your speciďŹ cation.
Determining a Capâ&#x20AC;&#x2122;s Thread Finish ....................................................... 167 Guide For Selecting A Cap Liner .......................................................... 169 Rubber Stopper Formulation Characteristics .......................................... 170 Rubber Stopper Formulation Descriptions ............................................. 171 Suggested Torque for Screw Caps ........................................................ 167
'LASSÂŹ#ONTAINERSÂŹ Determining a Glass Container Thread Finish ........................................ 175 Factors for Selecting a Glass Container ................................................. 174 General Cleaning of Glassware ............................................................. 179 Glass Manufacturing Terminology ......................................................... 172 Glass Types ........................................................................................ 173 Mold Lubricants and Residues ............................................................. 177 Pressure and Vacuum in Glass Vessels ................................................. 177 Recycling Glass Containers .................................................................. 179 Sterilization of Glass Containers ........................................................... 177 Weathering of Glass Containers............................................................ 177
3AFETYÂŹ#OATEDÂŹ'LASSÂŹ#ONTAINERSÂŹ Autoclave & Sterilization Recommendations .......................................... 178 Labeling Adhesives for Coated Glass Containers .................................... 178 Recycling Safety Coated Containers ...................................................... 178
0LASTICÂŹ#ONTAINERSÂŹ Biological Properties of Plastics ............................................................ 183 Determining a Plastic Container Thread Finish ....................................... 183 Factors for the Selection of Plastic Containers ....................................... 182 Plastic Manufacturing Terminology ....................................................... 180 Plastic Resins ..................................................................................... 181 Resin IdentiďŹ cation Codes .................................................................... 187 Sterilization of Plastics ......................................................................... 185 WHEATON
0LASTICSÂŹ#APABILITIES We also offer a broad range of plastic containers and vials for the laboratory and diagnostics markets. We are able to provide products that have been produced to extreme tolerances like our Wheaton LeakResistant plastic bottles and caps, as well as precision items such as our controlled dropper tips. We have over 40 years of plastic manufacturing experience and our mold design and production capabilities provide you with the most efďŹ cient and economical products for your lab.
,ABORATORYÂŹ%QUIPMENT Wheaton Science Products has developed and produced a variety of unique laboratory instruments that are designed to facilitate routine tasks and automate complex processes. These products include automated liquid dispensers and laboratory equipment for cell culture development and scale-up systems for cell culturing. In addition, Wheaton Science Products can custom design and produce instrumentation to speciďŹ cation. We can take a project from concept through production and provide complete control from start to ďŹ nish. GMP assembly and testing procedures are performed by highly skilled technicians using state-of-the-art equipment.
1.800.225.1437 (U.S. & Canada only) | +1.856.825.1100 | +1.856.825.1368 (F) | www.wheatonsci.com
4ECHNICALÂŹ$ATA ÂŹCaps & Closures
167
$ETERMININGÂŹAÂŹ#AP SÂŹ4HREADÂŹ&INISH
T
he closure industry has not standardized on dimensions to the extent that the container industry has, and it is usually advantageous to buy both container and closure from the same supplier when possible. Similar to the container industry, when a closure ďŹ nish is designated as 33-400, it means that the nominal diameter measured across the inside of the cap at the opening is approximately 33 mm. (See â&#x20AC;&#x153;Tâ&#x20AC;? dimension on illustration.) The 400 designates a speciďŹ c style of thread. The thread ďŹ nish of the cap and container must be the same. A container with a 33-400 thread ďŹ nish should be used with a cap that has a 33-400 thread ďŹ nish. To determine the cap size, measure the cap opening from one side of the inner wall to the opposite side of the inner wall. Compare this number to the numbers found in the â&#x20AC;&#x153;Tâ&#x20AC;? dimension columns in Table 2a or 2b. Once this number is found in the table, follow the row to the far left to ďŹ nd the â&#x20AC;&#x153;Nominal Diameterâ&#x20AC;? of the cap (33 in the above example).
To determine the speciďŹ c style of thread, measure the depth of the cap from the liner surface to the outside edge of the cap. Compare this number to the numbers found in the â&#x20AC;&#x153;Hâ&#x20AC;? dimension columns in Table 2a or 2b that appear in the same row as the Nominal Diameter of the cap. Once this number is found in the table, follow the column to the top to ďŹ nd the speciďŹ c style number (400 in the above example). The dimensions in the tables are approximate and will probably be slightly different from what is measured (especially the â&#x20AC;&#x153;Hâ&#x20AC;? dimension due to variations in liner thickness), but should be close enough to allow for the proper determination of the cap size.
3UGGESTEDÂŹ4ORQUEÂŹFORÂŹ3CREWÂŹ#APS The integrity of the cap-to-container seal is dependent upon a number of variables, such as the materials of the cap, liner, and container, the sealing surface of the container, and the application torque applied to the closure. The most important of these is the application torque. If the cap is applied too loosely, the contents could leak (especially during shipping). If the cap is applied too tightly, it may be too difďŹ cult to remove the cap, or the container could break during application.
Table 1 offers some suggested torques that should provide an adequate seal for most applications. It is recommended that proper tests be performed to determine the optimum torque for the application. The most practical way to check the tightness is to measure the removal torque after the cap has been on the container for about 5 minutes. The removal torque should closely approximate the application torque. The minimum removal torque noted in the table should be maintained after a 24 hour period.
4ABLEÂŹ ÂŹ3UGGESTEDÂŹ4ORQUESÂŹFORÂŹ#LOSURESÂŹ(in-lb) ÂŹ ÂŹ
0HENOLIC 5REAÂŹ#APÂŹ ONÂŹ'LASSÂŹ#ONTAINERÂŹ
0HENOLIC 5REAÂŹ#APÂŹ ONÂŹ0LASTICÂŹ#ONTAINERÂŹ
00 0%ÂŹ#APÂŹ ONÂŹ'LASSÂŹ#ONTAINERÂŹ
00 0%ÂŹ#APÂŹ ÂŹONÂŹ0LASTICÂŹ#ONTAINER
Cap mm
Application Torque
Min Removal Torque
Application Torque
Min Removal Torque
Application Torque
Min Removal Torque
Application Torque
Min Removal Torque
15 18 20 22 24 28 33 38 43 48 58 70 89 100
8 9 10 11 12 14 18 20 22 24 28 35 45 50
4 5 5 6 6 7 9 10 11 12 14 18 22 25
6 7 8 9 10 12 15 17 18 20 24 28 36 40
3 4 4 5 5 6 7 7 9 10 12 14 18 20
12 13 15 17 18 21 24 29 33 36 44 52 65 75
7 8 9 10 11 12 14 17 20 22 26 32 40 38
8 9 10 11 12 14 17 19 22 24 29 35 45 50
4 5 5 5 6 7 8 9 11 12 14 17 22 25
Although the information in this chart was acquired from reputable sources, it should only be used as a guide in determining the proper application torque. Wheaton accepts no responsibility for the accuracy of this data or for any consequences resulting from its use.
For a complete selection of Wheaton closures see the Cap & Closure Section on pages 31-42. If you need additional assistance on closures contact our Technical Service Department.
WHEATON
1.800.225.1437 (U.S. & Canada only) | +1.856.825.1100 | +1.856.825.1368 (F) | www.wheatonsci.com
4ECHNICAL¬$ATA Caps & Closures 4ABLE¬ A ¬#AP¬4HREAD¬&INISH¬$IMENSIONS¬(Dimensions are in inches) Nominal Dia (mm)
8 10 13 15 18 20 22 24 28 30 33 35 38 40 43 45 48 51 53 58 60 63 66 70 75 77 83 89 100 110 120
400
410
415
425
430
“T”
“H”
“T”
“H”
“T”
“H”
“T”
“H”
“T”
“H”
— — — — 0.790 0.790 0.870 0.945 1.095 1.130 1.270 1.370 1.480 1.590 1.660 1.750 1.875 1.975 2.075 2.230 2.350 2.470 2.585 2.745 2.920 3.040 3.275 3.520 3.945 4.340 4.735
— — — — 0.360 0.360 0.360 0.390 0.390 0.390 0.390 0.390 0.390 0.390 0.390 0.390 0.390 0.390 0.390 0.390 0.390 0.390 0.390 0.390 0.390 0.470 0.470 0.515 0.580 0.580 0.675
— — — — 0.710 0.790 0.870 0.945 1.095 — — — — — — — — — — — — — — — — — — — — — —
— — — — 0.500 0.530 0.560 0.620 0.685 — — — — — — — — — — — — — — — — — — — — — —
— — 0.520 0.585 0.710 0.790 0.870 0.945 1.095 — — — — — — — — — — — — — — — — — — — — — —
— — 0.430 0.535 0.595 0.720 0.815 0.935 1.060 — — — — — — — — — — — — — — — — — — — — — —
0.360 0.415 0.520 0.585 — — — — — — — — — — — — — — — — — — — — — — — — — — —
0.245 0.255 0.280 0.280 — — — — — — — — — — — — — — — — — — — — — — — — — — —
— — — — 0.710 0.790 0.870 0.945 1.095 1.130 1.270 — 1.480 — — — — — — — — — — — — — — — — — —
— — — — 0.605 0.605 0.605 0.650 0.725 0.760 0.775 — 0.940 — — — — — — — — — — — — — — — — — —
4ABLE¬ B ¬#AP¬4HREAD¬&INISH¬$IMENSIONS¬(Dimensions are in millimeters) Nominal Dia (mm)
8 10 13 15 18 20 22 24 28 30 33 35 38 40 43 45 48 51 53 58 60 63 66 70 75 77 83 89 100 110 120
400
410
415
425
430
“T”
“H”
“T”
“H”
“T”
“H”
“T”
“H”
“T”
“H”
— — — — 18.03 20.07 22.10 24.00 27.81 28.70 32.26 34.80 37.59 40.39 42.16 44.45 47.63 50.16 52.71 56.64 59.69 62.74 65.53 69.72 74.17 77.22 83.19 89.41 100.20 110.23 120.27
— — — — 9.14 9.14 9.14 9.91 9.91 9.91 9.91 9.91 9.91 9.91 9.91 9.91 9.91 9.91 9.91 9.91 9.91 9.91 9.91 9.91 9.91 11.94 11.94 13.08 14.73 14.73 17.14
— — — — 18.03 20.07 22.10 24.00 27.81 — — — — — — — — — — — — — — — — — — — — — —
— — — — 12.70 13.46 14.22 15.75 17.40 — — — — — — — — — — — — — — — — — — — — — —
— — 13.21 14.86 18.03 20.07 22.10 24.00 27.81 — — — — — — — — — — — — — — — — — — — — — —
— — 10.92 13.59 15.11 18.29 20.70 23.75 26.92 — — — — — — — — — — — — — — — — — — — — — —
9.14 10.54 13.21 14.86 — — — — — — — — — — — — — — — — — — — — — — — — — — —
6.22 6.48 7.11 7.11 — — — — — — — — — — — — — — — — — — — — — — — — — — —
— — — — 18.03 20.07 22.10 24.00 27.81 28.70 32.26 — 37.59
— — — — 15.37 15.37 15.37 16.51 18.42 19.30 19.69 — 23.88
— — — — — — — — — — — — — — — — —
—
WHEATON
1.800.225.1437 (U.S. & Canada only) | +1.856.825.1100 | +1.856.825.1368 (F) | www.wheatonsci.com
— — — — — — — — — — — — — — —
168
169
4ECHNICAL¬$ATA ¬Caps & Closures
'UIDE¬FOR¬3ELECTING¬A¬#AP¬,INER Usually the smallest component part of the package and usually overlooked is the selection of the cap liner. The liner must not alter or be altered by the product. It must withstand repeated applications and removals against the container surface while maintaining the integrity of the sealing surface. Below is some information that may help in choosing the right liner from our product offering. Material
Description
Applications
Poly-Vinyl
One mil poly vinyl film bonded to one mil HDPE on a #30 white pulp paper backing. Superior to plain pulp paper because it provides excellent moisture barrier.
General purpose: Suitable for wide range of applications. Chemical resistance: Good for mild acids, alkalis, solvents, alcohols, oils and aqueous products; poor for active hydrocarbons and bleaches.
Poly-Seal®
Manufactured from LDPE. The unique cone design provides a wedge type seal that not only seals across the top but also across the inside diameter.
Unique problem solving type of liner. This liner is stress crack resistant and offers superior torque retention and excellent sealing characteristics. It is recommended that this liner be tested prior to use for leak seal.
Foamed Polyethylene
A one piece, three ply coextruded liner consisting of foamed and solid LDPE. The foam core is sandwiched with solid clear PE.
General Purpose: Broad applications base. Chemical resistance-good for acids, alkalis, solvents, alcohols, oils, household cosmetics and aqueous products. Poor for hydrocarbon solvents. Liner provides tight seal.
Pulp/Metal Foil
Aluminum foil bonded to pulp board.
Good barrier properties, good resistance to hydrocarbons, oils, ketones and alcohols. Not good for acids or alkalis.
Styrene-Butadiene Rubber (14B)
The white rubber lining material consists of homogeneous sulfur cured styrene-butadiene rubber (SBR). FDA Status complies with 21CFR 177.26, “Rubber articles intended for repeated use.”
Excellent properties of resilience, resistant to moisture vapor. Satisfactory for most moderate chemicals. Not good for oils, strong acids and hydrocarbons. Autoclavable.
Styrene-Butadiene Rubber/0.005 PTFE
The white rubber/0.005” PTFE liner consists of virgin PTFE bonded to the white sulfur cured, styrene-butadiene rubber. Complies with the FDA 21CFR 177.1550.
Designed for the ultimate in product safety. PTFE provides totally inert inner seal and surface facing the sample or product. Autoclavable.
Teflon Faced Silicone Rubber
The liner consists of 0.005” thick Teflon bonded to 0.055” thick silicone rubber.
Ideal for low temperature storage applications. Teflon facing provides excellent chemical barrier. Autoclavable
Teflon Faced Foamed Polyethylene
Teflon®-faced foamed polyethylene liner that offers the excellent chemical resistance of Teflon® with the compressibility and sealing properties of polyethylene foam.
Typical applications: analytical lab samples, high purity chemicals, strong acids, solvents. Excellent for environmental samples, pharmaceuticals and diagnostic reagents.
Note: Closures and liners are designed for a variety of applications. Product performance can vary depending on conditions. It is recommended that proper tests be performed to determine the best liner for the application.
WHEATON
1.800.225.1437 (U.S. & Canada only) | +1.856.825.1100 | +1.856.825.1368 (F) | www.wheatonsci.com
4ECHNICALÂŹ$ATA Caps & Closures
Straight Plug Style
2-Leg Lyophilization Stoppers
2UBBERÂŹ3TOPPERÂŹ&ORMULATIONÂŹ$ESCRIPTIONS Listed below are the primary stopper formulations with general descriptions that are supplied by Wheaton Science Products.
'RAYÂŹ"ROMOBUTYL ÂŹWITHÂŹ#OMPLETEÂŹ#OAT Pros: low gas and vapor permeability, good for multiple piercing applications, compatible with most cephalosporinâ&#x20AC;&#x2122;s, resistant to animal, vegetable, and mineral oils, good resistance to aliphatic, aromatic and chlorinated solvents. Cons: not recommended for use with ketones. Can be autoclaved and irradiated.
'RAYÂŹ#HLOROBUTYL Pros: low gas and vapor permeability, resistant to animal and vegetable oil, good for lyophilization applications. Cons: not good for multiple piercing applications, poor resistance to mineral oil, aliphatic, aromatic, and chlorinated solvents. Can be autoclaved and irradiated
'RAYÂŹ#HLOROBUTYL )SOPRENEÂŹ"LEND ÂŹWITHÂŹ04&%ÂŹ&ACING Pros: barrier properties of PTFE, good coring characteristics, fair resistance to gas and moisture transmission compared to red isoprene. Cons: contains dry natural rubber. Can be autoclaved.
'RAYÂŹ#HLORBUTYL )SOPRENEÂŹ"LEND
'RAYÂŹ"ROMOBUTYL Pros: low gas and vapor permeability, good for multiple piercing applications, excellent moisture absorption and desorption properties following autoclave and lyophilization drying cycles. Cons: poor resistance to mineral oil, aliphatic, aromatic, and chlorinated solvents. Can be autoclaved and irradiated.
'RAYÂŹ"ROMOBUTYL Pros: low gas and vapor permeability, great for multiple piercing applications after gamma irradiation, ultra low extractable compound, compatible with most cephalosporinâ&#x20AC;&#x2122;s, very good moisture absorption and desorption properties following autoclave and lyophilization drying cycles, compatible with WFI applications. Cons: poor resistance to mineral oil, aliphatic, aromatic, and chlorinated solvents. Can be autoclaved and irradiated.
'RAYÂŹ"ROMOBUTYL Pros: low gas and vapor permeability, very good properties regarding ozone, animal and vegetable oil. Cons: not good for multiple piercing applications, poor resistance to mineral oil, aliphatic, aromatic, and chlorinated solvents. Can be autoclaved.
'RAYÂŹ#HLOROBUTYL Pros: low gas and vapor permeability, good for multiple piercing applications, resistant to animal and vegetable oils. Cons: poor resistance to mineral oil, aliphatic, aromatic, and chlorinated solvents. Can be autoclaved and irradiated.
'RAYÂŹ#HLOROBUTYL Pros: low gas and vapor permeability, good for multiple piercing applications, resistant to animal and vegetable oils, good for lyophilization applications. Cons: poor resistance to mineral oil, aliphatic, aromatic, and chlorinated solvents. Can be autoclaved and irradiated.
'RAYÂŹ#HLOROBUTYL Pros: low gas and vapor permeability, resistant to animal and vegetable oil, good for lyophilization applications. Cons: poor resistance to mineral oil, aliphatic, aromatic, and chlorinated solvents. Can be autoclaved and irradiated.
WHEATON
3-Leg Lyophilization Stopper
Pros: good coring and reseal characteristics, fair resistance to gas and moisture transmission compared to red isoprene, good for lyophilization applications. Cons: contains dry natural rubber. Can be autoclaved.
"LACKÂŹ(ALOBUTYL Pros: good resistance to gas and vapor transmission, good for lyophilization applications. Cons: poor coring and re-seal characteristics, not good for use with acidic products. Can be autoclaved.
2EDÂŹ)SOPRENE Pros: good coring and re-seal characteristics. Cons: contains dry natural rubber, poor resistance to gas and vapor transmission compared to butyl, not appropriate for products that require an inert gas blanket, not good for use with acidic products or solvents. Can be autoclaved and irradiated.
2EDÂŹ.ATURAL Pros: good coring and re-seal characteristics. Cons: contains dry natural rubber, poor gas and vapor transmission compared to butyl, not appropriate for products that require an inert gas blanket, not good for use with acidic products or solvents. Can be autoclaved and irradiated.
0INKÂŹ.ATURAL Pros: good coring and re-seal characteristics. Cons: contains dry natural rubber, poor gas and vapor transmission compared to butyl, not appropriate for products that require an inert gas blanket, not good for use with acidic products or solvents. Can be autoclaved and irradiated.
.ATURALÂŹ3ILICONE Pros: Good for high heat applications, can withstand multiple steam autoclaves. Cons: very poor barrier to gas and vapor transmission, not appropriate for products that require an inert gas blanket. Can be autoclaved and irradiated.
"LACKÂŹ6ITONÂ&#x161; Pros: low gas and vapor permeability, resistant to animal, vegetable and mineral oil, aliphatic, aromatic, and chlorinated solvents, good for high heat applications. Cons: not recommended for ketones. Can be autoclaved.
1.800.225.1437 (U.S. & Canada only) | +1.856.825.1100 | +1.856.825.1368 (F) | www.wheatonsci.com
170
171
4ECHNICAL¬$ATA ¬Caps & Closures
2UBBER¬3TOPPER¬&ORMULATION¬#HARACTERISTICS¬ ¬
¬
¬
¬
¬
¬
Gray Bromobutyl/39 w/Safety Coat
Gray Bromobutyl/46
Gray Bromobutyl/47
Gray Bromobutyl/50
Gray Chlorobutyl/45
Gray Chlorobutyl/46
Gray Chlorobutyl/50
Gray Chlorobutyl/55
Bromobutyl
Bromobutyl
Bromobutyl
Bromobutyl
Chlorobutyl
Chlorobutyl
Chlorobutyl
Chlorobutyl
39 1.19 31
46 1.35 48
47 1.26 41
50 1.35 44.9
45 1.24 38.4
46 1.32 45.5
50 1.30 42.7
55 1.38 47.9
- 0.3 0.00 0.01 0.8 — —
- 0.12 0.00 0.70 0.7 — —
0.00 0.01 0.03 0.3 — —
+ 0.22 0.04 1.40 1.3 1.31 < 0.50
- 0.20 0.00 1.00 0.0 1.20 < 0.50
- 0.37 0.00 0.40 0.3 — —
- 0.23 0.00 0.05 0.4 0.20 < 0.50
- 0.30 0.00 1.00 1.0 0.30 < 0.50
Passes Passes Passes
— — Passes
— — Passes
— — Passes
Passes Passes Passes
— — Passes
Passes Passes Passes
Passes Passes Passes
Gray Chlorobutyl Isoprene Blend/40
Gray Chlorobutyl Isoprene Blend/50
Black Halobutyl/60
Red Isoprene/45
Red Natural/40
Pink Natural/48
Natural Silicone
Black Viton/55
Chloro/Iso Blend
Chloro/Iso Blend
Halobutyl
Isoprene
Natural
Natural
Silicone
Viton
40 1.15 29.5
50 1.46 55.7
60 1.43 51.2
45 1.33 32.0
40 1.25 38.9
48 1.65 55.6
55 1.14 N/A
55 1.87 N/A
- 0.6 0.0 0.7 0.0 1.0 0.0
- 0.8 0.0 2.6 0.0 1.6 —
- 0.3 0.0 5.0 0.5 0.5 0.0
- 0.2 0.00 0.90 1.6 2.50 < 0.50
+ 0.1 0.0 29.0 1.4 0.2 0.0
+ 1.5 0.0 34.0 1.9 0.3 0.1
- 0.30 0.10 1.00 0.0 — < 0.50
0.38 0.06 0.00 0.4 <0.05 < 0.50
Passes Passes Passes
Passes Passes Passes
Passes Passes Passes
Passes Passes —
Passes Passes —
Passes Passes —
Passes Passes Passes
— — Passes
Typical Properties: Base Polymer Durometer (shore A +/- 5) Specific Gravity Ash %
Typical Extraction Data, USP: Distilled Water pH Change Reducing Agents, ml, .01N I2 Turbidity, NTU Total Solids, mg/100 mL Zinc, ppm Lead, ppm
Toxicity Data: Acute Systemic Intracutaneous Reactivity Cytotoxicity
Typical Properties: Base Polymer Durometer (shore A +/- 5) Specific Gravity Ash %
Typical Extraction Data, USP: Distilled Water pH Change Reducing Agents, ml, .01N I2 Turbidity, NTU Total Solids, mg/100 mL Zinc, ppm Lead, ppm
Toxicity Data: Acute Systemic Intracutaneous Reactivity Cytotoxicity
All stopper formulation data presented above is general information. Specific laboratory results are available upon request. It is recommended that all stoppers be thoroughly tested by the customer for compatibility.
WHEATON
1.800.225.1437 (U.S. & Canada only) | +1.856.825.1100 | +1.856.825.1368 (F) | www.wheatonsci.com
4ECHNICAL¬$ATA ¬Glass 'LASS¬-ANUFACTURING¬4ERMINOLOGY
172
&ORMING The shaping of hot glass.
'LASSBLOWING The shaping of glass using air pressure.
'OB A portion of hot glass that is delivered from the furnace for forming.
(ARD¬'LASS A glass with a high softening point or high viscosity (usually borosilicate).
(OT¬%ND A manufacturing term for the area of a glass manufacturing plant where molten glass is processed.
!NNEALING¬0OINT The temperature at which internal stresses in glass are significantly reduced. In the annealing operation, glass is gradually cooled from above the annealing point temperature to below the strain point temperature. This slow cooling relieves residual thermal stresses that would develop if the glass were allowed to cool in an uncontrolled manner.
"ATCH The mixed raw materials used in manufacturing glass that have been blended and proportionally mixed for delivery to the glass furnace.
,AMPWORKING Flame re-working of a blank or tubing cane, typically on a lathe.
,EHR A long belt-fed, tunnel-shaped oven used to heat glass to the annealing point and then slowly cool it to room temperature to remove any residual thermal stresses in the glass. Can also be a large oven where glass is manually loaded and unloaded (batch lehr).
,INEAR¬#OEFlCIENT¬OF¬%XPANSION
"LISTER
The fractional change in length of a piece of glass per degree change in temperature. The coefficient of expansion generally indicates the thermal endurance of the glass. Glasses with a low linear coefficient of expansion can be subjected to greater rapid temperature changes with less chance of fracture than glasses with a high coefficient of expansion. (Generally, Type I glasses have a lower COE than Type III).
A gaseous inclusion or bubble in the glass.
-ELT
"LOW¬-OLD
The amount of glass that is melted at one time.
Usually a metal mold used to form a piece of glass from a hot gob.
-OLD¬-ARK
"OROSILICATE¬'LASS
The mark in the bottom of the container that denotes the manufacturer.
A high silicate glass that has at least 5% boron oxide.
0RESSED¬'LASS
#ONTRACTION¬#OEFlCIENT
Glassware that is formed by pressing a gob between a mold and a plunger.
The fractional change in length of a piece of glass per degree change in temperature on cooling from the annealing point to ambient temperature.
3ODA ,IME¬ OR¬3OFT ¬'LASS
#ULLET
3OFTENING¬0OINT
"LANK Usually refers to a glass parison that is formed during the first step of glass molding. The piece is then transferred to a lamp worker or glass blower for final shape configuration.
Waste or broken glass. Clean cullet is always used in the batch.
A glass with a substantial portion of lime in the formula.
$ENSITY
Temperature at which a thread or rod of glass rapidly deforms under its own weight.
Mass per unit volume measured in grams per cubic centimeter.
3TRAIN¬0OINT
$ISTRIBUTION
The temperature at which thermal residual stresses become permanent upon cooling. Temperatures above the strain point will introduce permanent stresses that can cause or contribute to fracture. At temperatures below the strain point, the glass can be temporarily heated and cooled without introducing permanent stress. The strain point can be considered the maximum service temperature.
The wall thickness or the evenness of the glass distribution throughout the container.
%TCH To attack the glass surface with a strong chemical agent, usually hydro-fluoric acid. Usually used in decorating glass.
&INISH The part of a bottle which holds the cap, stopper or closure. The area that has the threads (generally a shortened term for thread finish). The first part made on an automatic machine, but the last part (or finish) to be made when bottles were hand blown. On labware, may refer to an interchangeable ground joint.
4ANK The furnace that melts the raw materials into molten glass. Temperatures in the tank vary depending on the glass type being melted, but are typically in excess of 1,200°C.
4EMPER The degree of residual stress in annealed glass as measured using polarized light techniques.
7EATHERING The attack on glass surface by atmospheric elements.
WHEATON
1.800.225.1437 (U.S. & Canada only) | +1.856.825.1100 | +1.856.825.1368 (F) | www.wheatonsci.com
173
4ECHNICALÂŹ$ATA ÂŹGlass
'LASSÂŹ4YPES
4ABLEÂŹ ÂŹ4YPICALÂŹ0ROPERTIESÂŹOFÂŹ7HEATONÂŹ'LASS
The glass products in this catalog are made from many different glass formulations. Following are brief deďŹ nitions of these glass types and descriptions of their characteristics. 180 Glass: An exceptionally clear borosilicate glass of high chemical durability, which has been especially formulated for the lowest background count. Great care has been taken to select only those ingredients for the batch that would not cause unwanted background count or color. Potassium as a separate element has been excluded from the batch to minimize K40. Special controls assure high quality and batch to batch uniformity. This glass is only available as a tubing vial. 200 Glass: Also referred to as 33 expansion low extractable borosilicate glass, is a clear borosilicate glass with exceptional thermal endurance that glass that conforms to USP Type I and ASTM E-438 Type I, Class A requirements. Most of our laboratory products are made from this type of glass. This glass meets all sterilization requirements. 300 Glass: A chemically resistant clear borosilicate glass that meets all the requirements for Type I glass as speciďŹ ed in the current revision of the U.S. Pharmacopeia. 320 Glass: A similar composition to 300 Glass except amber color for light sensitive applications. Meets UV light protection limits as speciďŹ ed in the current revision of the U.S. Pharmacopeia. 400 Glass: A clear borosilicate glass that falls well within the limits for USP, Type I chemically resistant borosilicate glass, as speciďŹ ed in the current revision of the U.S. Pharmacopeia.
ÂŹ
'LASSÂŹ4YPE â&#x20AC;&#x153;180â&#x20AC;?
â&#x20AC;&#x153;200â&#x20AC;?
â&#x20AC;&#x153;300â&#x20AC;?
â&#x20AC;&#x153;320â&#x20AC;?
â&#x20AC;&#x153;400â&#x20AC;?
â&#x20AC;&#x153;500â&#x20AC;?
â&#x20AC;&#x153;800â&#x20AC;?
â&#x20AC;&#x153;900â&#x20AC;?
Strain Point °C
510
505
525
510
520
505
510
496
Annealing Point °C
560
560
570
560
560
540
548
536
Softening Point °C
821
820
785
770
735
730
729
713
Linear CoefďŹ cient of Expansion (0-300°C)x10-7
33
33
55
55
63
62
88
91
Density g/cm3
2.23
2.22
2.33
2.42
2.44
2.46
2.48
2.50
ASTM Glass Type & Class
I A
I A
I B
â&#x20AC;&#x201D; â&#x20AC;&#x201D;
â&#x20AC;&#x201D; â&#x20AC;&#x201D;
â&#x20AC;&#x201D; â&#x20AC;&#x201D;
â&#x20AC;&#x201D; â&#x20AC;&#x201D;
â&#x20AC;&#x201D; â&#x20AC;&#x201D;
USP Glass Type
I
I
I
I
I
I
III,NP
III,NP
Light Protection
Yes
NP= Non-parenteral
Yes
Yes
USP= U.S. Pharmacopeia
4ABLEÂŹ ÂŹ4YPICALÂŹ#OMPOSITIONÂŹ ÂŹOFÂŹ3OMEÂŹ'LASSÂŹ #ONTAINERS Forming Process
â&#x20AC;&#x153;180â&#x20AC;?
â&#x20AC;&#x153;200â&#x20AC;?
â&#x20AC;&#x153;300â&#x20AC;?
â&#x20AC;&#x153;320â&#x20AC;?
â&#x20AC;&#x153;400â&#x20AC;?
â&#x20AC;&#x153;500â&#x20AC;?
â&#x20AC;&#x153;800â&#x20AC;?
â&#x20AC;&#x153;900â&#x20AC;?
Tubing Vial
Tubing Vial
Tubing Vial
Tubing Molded Molded Molded Molded Vial Container Container Container Container
Si02
81
81
72
70
69
65.5
73
Al2O3
2
2
7
6
5.5
6
2
2
Na2O+K2O
4
4
9
8
10
9
14
14.2
500 Glass: Similar to the 400 Glass formulation except amber color for light sensitive applications. Meets UV light protection limits as speciďŹ ed in the current revision of the U.S. Pharmacopeia.
CaO+MgO
<0.2
<0.2
1
0.5
1.5
0.5
10.5
10
<0.05
0.3
800 Glass: A superior soda-lime clear glass that meets requirements for Type III soda lime glass as speciďŹ ed in the current revision of the U.S. Pharmacopeia.
BaO
900 Glass: Similar in formulation to 800 Glass except amber color for light sensitive applications. Meets UV light protection limits as speciďŹ ed in the current revision of the U.S. Pharmacopeia.
TiO2
B 2O 3
13
13
12
7
11
9
Fe2O3
<0.1
<0.1
<0.1
1.5
<0.1
1
<0.1
2
2.5
1.5
0.5
0.5
ZnO
0.5
7
MnO2 5
0.2
SO3
4ABLEÂŹ ÂŹ4YPICALÂŹ%LEMENTALÂŹ%XTRACTIONÂŹ$ATAÂŹOFÂŹ3OMEÂŹ'LASSÂŹ4YPESÂŹ PPM USP Glass Type
Type I Clear - Molded Type II Clear - Molded Type III Clear - Molded Type I Amber - Molded Type II Amber - Molded Type III Amber - Molded Type I Clear - Tubular Type I Amber - Tubular Blank
Si
Al
Na
K
Ca
1.3 1.65 26 2.4 1.4 22 4.8 7.4 <0.05
<0.006 <0.006 0.17 0.06 0.18 0.16 <0.01 0.17 <0.006
0.26 0.5 9.1 0.71 9.5 9.3 1.1 1.8 <0.01
0.05 0.04 0.18 0.1 0.27 <0.03 <0.03 0.45 0.048
<0.02 <0.02 3.6 <0.02 3.4 3.4 0.13 <0.02 <0.02
Mg
<0.02 <0.02 0.20 <0.02 0.23 0.23 0.07 <0.02 <0.02
Fe
Ba
Zn
<0.015 <0.015 <0.015 <0.015 0.2 0.016 <0.012 <0.015 <0.015
<0.008 <0.008 <0.008 <0.008 <0.008 <0.008 <0.008 <0.008 <0.08
0.14 0.16 0.07 0.21 0.18 0.03 <0.01 0.23 <0.006
Results after autoclave at 121° C for 60 minutes - high purity water in 20 mL containers
WHEATON
1.800.225.1437 (U.S. & Canada only) | +1.856.825.1100 | +1.856.825.1368 (F) | www.wheatonsci.com
73
Ti
<0.005 0.007 <0.005 <0.005 <0.005 <0.005 <0.005 <0.005 <0.005
4ECHNICAL¬$ATA ¬Glass &ACTORS¬FOR¬3ELECTING¬A¬'LASS¬#ONTAINER Chemical durability and USP type glass surfaces are subject to attack when exposed to solutions and vapors with which they can react. Reactive substances will leach constituents from the glass surface into the contained product. This reaction will occur with ordinary aqueous, saline and alcohol based solutions. The primary ion removed from the glass surface is sodium; however, all elements are subject to leaching. It is not uncommon to experience an increase in product pH as sodium is extracted from the container. The corrosion of glass occurs over time, and is accelerated by wet or moist heat-treat processes such as autoclaving. The United States Pharmacopoeia classifies pharmaceutical glass containers according to their resistance to water attack, also referred to as chemical durability. Containers are classified as Type I, II, III and NP. Type I is the most durable glass, and Type NP is the least durable glass. Test methods and specification limits for determining the chemical resistance of glass can be found in the current revision of the U. S. Pharmacopoeia, section <661> Containers. USP glass type can be used as a general guide for container selection; however, the applicability of a particular container to an end use cannot be determined only by USP type. General criteria have developed over the years to assist with the selection of glass containers for specific end uses. These guidelines are only recommendations. It is the product manufacturer’s responsibility to ensure that the glass container is suitable for the application and/or contained product.
530¬4YPE¬)) USP Type II glass is soda-lime glass that has been treated with sulfur compounds to de-alkalize the interior surface of the container. This treatment results in a container with high chemical resistance because alkali is removed from the glass surface prior to use. The amount of ions available to leach into the product is reduced; thus, the container durability is increased. Extraction salts will be present on the interior surface of new sulfur treated containers, and the containers may require washing prior to use. Type II glass is less chemically durable than Type I glass, but is more chemically durable than Type III glass. It can be used for acidic and neutral parenteral preparations that remain below pH 7 during their shelf life.
530¬4YPE¬))) USP Type III is a soda-lime glass with moderate chemical resistance. It is typically acceptable for packaging dry powders that will be dissolved into solutions or buffers that are insensitive to alkali. Type III glass may not be suitable for autoclaved products because the autoclaving process will accelerate the glass corrosion reaction. Dry heat sterilization processes are typically not a problem for Type III containers.
530¬4YPE¬) Glasses in the USP Type I classification are borosilicate glasses with superior chemical resistance. This class of glasses represents the least reactive glass containers available. Typically, these glasses can be used for most applications, including packaging for parenteral and non-parenteral products. Type I glass may be used to package acidic, neutral and alkaline products. Water for injection, un-buffered products, chemicals, sensitive lab samples, and those requiring sterilization are commonly packaged in Type I borosilicate glass. Type I glasses can be subject to chemical attack under certain conditions, so container selection must be made carefully for very low and very high pH applications. Most glass laboratory apparatus are Type I borosilicate glass.
530¬4YPE¬.0
Even though Type I glass has the highest chemical durability, there still may be some sensitivity with certain packaged products. For applications where standard Type I glasses do not provide sufficient protection against alkali extraction and pH shifting, internal surface treatment can be used to further improve the chemical durability of the container. This surface enhancement may become especially important for pH sensitive products packaged in small containers because smaller containers have a higher surface area to volume ratio. See the USP Type II description for an explanation of the internal surface treatment process. It should be noted that the USP does not place any additional durability requirements on surface treated Type I glass.
It is important to consider filling and processing steps when choosing a container. Both mechanical and thermal stresses are important factors. For a given thermal expansion range, a typical tubing vial with thin, uniform walls will withstand thermal shock better than a molded glass container.
WHEATON
174
USP Type NP is general-purpose soda-lime glass. It is used for non-parenteral applications where chemical durability and thermal shock are not factors. These containers are frequently used for capsules, tablets and topical products. Type III glass is also suitable for all Type NP applications.
&ACTORS¬OTHER¬THAN¬530¬4YPE (ANDLING¬#ONSIDERATIONS
The physical design of the container will play a part in the amount of thermal and mechanical shock resistance it exhibits. It is frequently necessary to make a compromise between high resistance to mechanical shock and high resistance to thermal shock.
1.800.225.1437 (U.S. & Canada only) | +1.856.825.1100 | +1.856.825.1368 (F) | www.wheatonsci.com
175
4ECHNICAL¬$ATA ¬Glass ,IGHT¬3ENSITIVITY
/THER¬6ARIABLES¬TO¬#ONSIDER
Light sensitive products must be packaged in amber glass. Amber glass is formulated to absorb light in the Ultra Violet region of the electromagnetic spectrum. Test methods and specification limits for light protection can be found in the current revision of the U. S. Pharmacopoeia, section <661> Containers.
3PECIlC¬)ON¬3ENSITIVITY If a product is sensitive to the presence of particular ions, the composition of the glass container should be considered. For example, products that contain sulfate salts may experience the formation of precipitates if packaged in glass with barium or calcium in the formulation. In this example, it would be desirable to avoid glasses that contain barium and calcium. A second example is pre-cleaned containers for environmental sampling. Even though the containers are clean, the chemical durability characteristics of the glass have not been altered. Thus, it would not be feasible to test the samples for low levels of sodium, because the sample will extract sodium from the container’s surface.
1. Container size and physical design. Narrow mouth vs. wide mouth, tall vs. short, etc. 2. Color. Is light sensitivity an issue? Is amber glass needed? 3. Shelf life. How long are you planning to store a sample or product in the container? 4. Method of fabrication. Molded or tubing based? 5. Processes the container will undergo. Storage conditions (freezing or heat); washing, sterilization; method of sealing; humidity; hot or cold filling; de-pyrogenation. 6. Storage after filling. Time (shelf life needed); heat, cold, moisture; shipping conditions; light exposure. 7. Product composition. Dry powder; pH; concentration of ions; physico-chemical properties. 8. Closure type. Wide mouth vs. narrow mouth; septa lined open top cap; closed cap; liner material; sealing needed; threaded cap or crimp seal.
'LASS¬*OINT¬3PECIlCATIONS TS Symbol used to indicate interchangeable joint, stoppers and stopcocks that comply with the requirements of ASTM E676-02 (taken from commercial standard CS21).
JS Symbol used to indicate a spherical joint that complies with the requirements of ASTM E677-94 (taken from commercial standard CS21-58).
TS
TS 24/40 Outer Joint
24/40 Inner Joint
JS 35/25 Ball Joint
JS 35/25 Socket Joint
$ETERMINING¬A¬'LASS¬#ONTAINER¬4HREAD¬&INISH
/PENING¬$IMENSION¬OF¬'LASS¬#ONTAINERS¬WITH¬4HREAD¬&INISH
GPI refers to the Glass Packaging Institute, which is responsible for establishing and issuing uniform voluntary standards regarding the types and finishes produced by American glass manufacturers. When a container finish is designated as 20-400, it means that the diameter across the outside of the threads is approximately 20 mm. (See “T” dimension on illustration.) The 400 designates a specific style of thread. Tables 6a and 6b show average dimensions for comparison and to aid in sizing. The actual dimensions vary slightly and are different from tubing based containers and molded containers.
The minimum opening dimension "I" of a glass container can be found if the containers thread finish is known. If the thread size of the container is 38-400, the "I" can be determined from either Table 6a or 6b by looking down the “T” Dimension column (far left) until you find the number 38. Follow this row to the right, until you come to the “I” min. column that is listed under the number 400. This number is the minimum opening of the container. The opening can be larger, but it should not be smaller.
WHEATON
1.800.225.1437 (U.S. & Canada only) | +1.856.825.1100 | +1.856.825.1368 (F) | www.wheatonsci.com
4ECHNICAL¬$ATA ¬Glass 4ABLE¬ A ¬'LASS¬4HREAD¬&INISH¬$IMENSIONS¬(Dimensions are in inches) "T” Dim (mm)
“H”
400 “I” min
“H”
410 “I” min
“H”
415 “I” min
“H”
425 “I” min
“H”
430 “I” min
8 10 13 15 18 20 22 24 28 30 33 35 38 40 43 45 48 51 53 58 60 63 66 70 75 77 83 89 100 110 120
— — — — 0.356 0.356 0.356 0.385 0.385 0.388 0.388 0.388 0.388 0.388 0.388 0.388 0.388 0.393 0.393 0.393 0.393 0.393 0.393 0.393 0.393 0.472 0.472 0.520 0.582 0.582 0.670
— — — — 0.325 0.404 0.483 0.516 0.640 0.653 0.791 0.875 0.987 1.091 1.165 1.251 1.381 1.479 1.578 1.735 1.853 1.972 2.090 2.247 2.424 2.546 2.753 2.918 3.344 3.737 4.131
— — — — 0.513 0.544 0.575 0.636 0.698 — — — — — — — — — — — — — — — — — — — — — —
— — — — 0.325 0.404 0.483 0.516 0.640 — — — — — — — — — — — — — — — — — — — — — —
— — 0.442 0.547 0.607 0.732 0.827 0.947 1.072 — — — — — — — — — — — — — — — — — — — — — —
— — 0.218 0.258 0.325 0.404 0.483 0.516 0.640 — — — — — — — — — — — — — — — — — — — — — —
0.257 0.270 0.295 0.295 — — — — — — — — — — — — — — — — — — — — — — — — — — —
0.114 0.148 0.218 0.258 — — — — — — — — — — — — — — — — — — — — — — — — — — —
— — — — 0.604 0.604 0.604 0.647 0.724 0.760 0.775 — 0.946 — — — — — — — — — — — — — — — — — —
— — — — 0.270 0.312 0.410 0.460 0.525 0.568 0.703 — 0.828 — — — — — — — — — — — — — — — — — —
4ABLE¬ B ¬'LASS¬4HREAD¬&INISH¬$IMENSIONS¬(Dimensions are in millimeters) "T” Dim (mm)
“H”
400 “I” min
“H”
410 “I” min
“H”
“I” min
“H”
“I” min
“H”
“I” min
8 10 13 15 18 20 22 24 28 30 33 35 38 40 43 45 48 51 53 58 60 63 66 70 75 77 83 89 100 110 120
9.04 9.04 9.04 9.78 9.78 9.86 9.86 9.86 9.86 9.86 9.86 9.86 9.86 9.98 9.98 9.98 9.98 9.98 9.98 9.98 9.98 11.99 11.99 13.21 14.78 14.78 17.02
8.26 10.26 12.27 13.11 16.26 16.59 20.09 22.23 25.07 27.71 29.59 31.78 35.08 37.57 40.08 44.07 47.07 50.09 53.09 57.07 61.57 64.67 69.93 74.12 84.94 94.92 104.93
13.03 13.82 14.61 16.15 17.73 -
8.26 10.26 12.27 13.11 16.26 -
11.23 13.89 15.42 18.59 21.01 24.05 27.23 -
5.54 6.55 8.26 10.26 12.27 13.11 16.26 -
6.53 6.86 7.49 7.49 -
2.90 3.76 5.54 6.55 -
15.34 15.34 15.34 16.43 18.39 19.30 19.69 24.03 -
6.86 7.92 10.41 11.68 13.34 14.43 17.86 21.03 -
WHEATON
415
425
430
1.800.225.1437 (U.S. & Canada only) | +1.856.825.1100 | +1.856.825.1368 (F) | www.wheatonsci.com
176
177
4ECHNICAL¬$ATA ¬Glass
3TERILIZATION¬OF¬'LASS¬#ONTAINERS
7EATHERING¬OF¬'LASS¬#ONTAINERS
Although most types of glass vials and containers are sterilizable by either steam or dry heat, some compositions perform better than others. Most Type I borosilicate glass is suitable, when proper techniques are followed, for sterilization and de-pyrogenation. Type III is not recommended for repeated steam sterilization, although this may be appropriate on a single use basis. Recommended autoclave cycles are 121°C @ 15psig for 20 minutes. Caps should be left loose on the containers. Proper care must be given when venting back to atmosphere or there may be damage to the containers.
When glass containers are formed, the surface of the glass is enriched in alkali. The annealing process further enhances this effect. This phenomena is usually of no practical consequence and goes unnoticed, but in certain circumstances, it interferes with further processing of the container. As glass is exposed to the atmosphere, a complex reaction occurs on the surface between the alkali on the glass and gasses in the air. These reactions are commonly known as weathering. The reaction produces salts, which can absorb water from the air. It is these salts that are the source of surface related decorating problems. Weathering salts are composed of a mixture of various hydrates of sodium carbonate and sulfate along with minor amounts of similar calcium salts. Weathering is a normal condition and such salts are always found on glass surfaces as they are exposed to the atmosphere. The quantity and crystal appearance will vary depending upon time, humidity and temperatures of storage. These salts are easily removed by water rinsing.
Dry heat sterilization can be achieved at a temperature of 160°C for 2 to 3 hours, but glass containers are capable of withstanding sterilization temperatures up to 500°C without noticeable degradation of the glass. Repeated dry heat sterilization of containers containing a fair amount of moisture may be susceptible to glass flaking. Inversion of the container and good ventilation would prevent this from occurring. Inspect glass containers for chips, cracks, and scratches before each use and discard if damage is evident, as breakage may occur during sterilization if used. Glass containers may also be sterilized using gas or chemicals. Ethylene oxide (EtO), formaldehyde, or peroxide gas is generally used when heat and pressure cannot be used due to material limitations. Chemical disinfectants normally used are quaternary ammonium compounds, iodophors, formalin, benzalkonium chloride, and ethanol. Glass containers may also be sterilized using irradiation, however, the process changes the color of the glass, which may not be acceptable for most applications. There is glass tubing available, which will not change color when irradiated. This would be available for those interested in large quantity orders of tubing vials only.
-OLD¬,UBRICANTS¬AND¬2ESIDUES Modern high-speed mold production of glass containers requires the use of release agents or coatings on the metal mold equipment to prevent sticking and malformation of the bottles in the molding process. A variety of coatings or lubricants are used to provide optimum viscosity and function according to the particular needs of the individual piece of process equipment as well as service conditions. The coatings are compounded from colloidal graphite and sulfur suspended in hydrocarbon oils and waxes with small amounts of modifiers such as calcium soaps and greases. This “mold dope” is replenished through periodic swabbing of the mold equipment. The hot forming temperature and the subsequent lehr annealing (1000 – 1100°F) process will burn off the volatile sulfur and organic oils and waxes. Portions of carbon can remain since the major component (graphite) is very slowly decomposed and oxidized in the process. Quality control in manufacturing employs a number of devises (both automatic and manual) to eliminate the small percentage of product that has excess graphite spots.
0RESSURE¬ ¬6ACUUM¬IN¬'LASS¬6ESSELS Because the conditions under which glassware is used vary widely, there is no guarantee against breakage. Always exercise care to protect personnel and property when using any vessel with vacuum or pressure. Never subject glassware showing visible signs of damage (chipped, cracked or scratched) to pressure or vacuum.
WHEATON
All glasses weather, but some are more resistant than others. Borosilicate glasses are most resistant, followed by durable soda-lime, and common soda lime. Since glass containers can be decorated in a myriad of ways, the weathering of glass must be considered in selecting a method that is effective and trouble free. Table 5 is a rough guide to decorating and labeling of glasses. The surface treatments used to remove weather salts or remove the alkali that cause weathering are somewhat limited. Since the salts are water soluble, a simple wipe with a wet cloth or washing prior to decoration or pressure sensitive labeling is effective in most cases. Heat and humidity cycling or storing glass in a confined space promotes weathering. Keeping the glass under constant low humidity is effective in slowing weathering as it keeps the surface dry and reduces the salt build-up. Dry heating the container just prior to decorating or pressure sensitive labeling is sometimes successful. A layer of absorbed moisture on the glass prevents good adhesion of pressure sensitive labels. Water based adhesives, however, would be no problem. Several possible solutions to the problem can be suggested: 1. Simply storing the containers in an area of low humidity for several days may solve the problem. 2. Washing or wiping the ware with warm water. This removes the weathering salts and allows the achievement of a moisture-free surface. 3. Heating the ware will dry the surface and allow good adhesion of the labels. Heating will not remove the salts so the heating must be accomplished shortly before labeling.
The presence of dry salts on the ware will not cause a problem, but the salts can again, rapidly absorb moisture.
7EATHERING¬#HART (√ = O.K.) Borosilicate
Soda-Lime
Rate of Weathering
Very slow (months)
Slow under low humidity. Rapid under high humidity. (typically weeks)
Pressure Sensitive Labels
√
√ Success varies with amount of weathering
Glue Labels
√
√
Ceramic Screen
√
√
Organic Screen
√
√
Gold
√
√ If not severely weathered
1.800.225.1437 (U.S. & Canada only) | +1.856.825.1100 | +1.856.825.1368 (F) | www.wheatonsci.com
4ECHNICAL¬$ATA ¬Glass
178
3AFETY¬#OATED¬#ONTAINERS A plastisol coating was developed to contain glass fragments and allow for a controlled release of the contents in the event of container breakage. The coating: • Adds impact, thermal shock, and slip resistance • Contains glass - prevents flying fragments and cuts • Contains contents - reduces risk of chemical exposure and inhalation. Allows time for proper disposal. The coating material is plastisol, which is a dispersion of a fine particle size PVC resin (polyvinyl chloride) in a plasticizer where stabilizers, fillers, modifiers, colorants, and other compounding ingredients may be added. When the plastisol is heated, the suspended PVC particles begin to swell and absorb the surrounding liquid plasticizer. When the temperature is increased to over 300°F, fusion of the particles occurs and the particles coalesce into a homogeneous mass. The coating process is a heat-andtime related process that determines coating weight and thickness and is controlled by machine line speeds and oven temperatures. The more heat, the heavier the coating, and the slower the line, the heavier the coating. Non-autoclavable coated containers can be used successfully at 121°C (250°F) and below. Do not use above 300°F or over direct heat or flame. The coating is not dry heat sterlizable. Coating will yellow and burn with high heat exposure but will continue to protect until black.
,ABELING¬!DHESIVES¬FOR¬#OATED¬'LASS¬¬ #ONTAINERS Labeling of plastisol coated glass containers has always been somewhat of a problem. It is important to select a face stock and adhesive combination with the proper performance characteristics for the intended product and application. It is recommended that prior to the selection of any adhesive, the customer contact the adhesive manufacturer or supplier and discuss the application requirements.
!UTOCLAVE¬3TERILIZATION¬¬ 2ECOMMENDATIONS¬FOR¬!UTOCLAVABLE¬¬ #OATED¬#ONTAINERS The suggested conditions for steam sterilization are 121°C (250°F) @ 15 psig for 20 minutes. Portions of the coating may absorb a small amount of water vapor and appear cloudy after autoclaving, however, the cloudiness will disappear as the coating dries. To speed clearing, glassware can be dried in an oven at 49 – 66°C (120 – 150°F). Autoclaving effects on the coating will vary slightly due to equipment, container size and configuration, procedure, and frequency of procedure. It is recommended that containers not be autoclaved touching each other to avoid possible sticking problems. Also, it is recommended that the autoclave pressure be allowed to return to zero before removing glassware. A sudden release of pressure may cause the coating to separate from the glass and produce air pockets under the coating. Evaluation of a sample is the best way to determine if the safety coating will work for your application.
2ECYCLING¬3AFETY¬#OATED¬#ONTAINERS
For on-line and pressure sensitive labeling of plastisol coated glassware, an acrylic based adhesive with low rubber and vinyl content is recommended. Other label adhesives will usually extract the plasticizer from the coating, become soft, bleed through the label, and eventually lose adhesion. Acrylics block the plasticizer extraction and allow the initial adhesion to remain undisturbed. There are, however, many variations of acrylic based adhesives and some are more effective than others. Adhesives are usually formulations of several chemicals that are combined in a variety of ratios and available in many forms. It is for these reasons, that accelerated age testing is advisable.
For after-use disposal, PVC safety coated containers create a unique situation in that they are a composite package of glass and plastic. Depending on the application, there are four ways to handle the disposal of coated containers:
When selecting an adhesive for a specific application, consideration should be given to the necessary bond strength and duration, moisture, UV, heat, and solvent resistance. There is no substitute for proper testing of the proposed materials under actual usage conditions. The final decision should be made by the customer to choose the label/adhesive combination that meets the requirements of the specific use.
For consumer pharmaceutical and cosmetic applications, coated glass containers should be able to go into residential glass recycling collection. Coated glass makes up such a small percentage of total glass collected that it should not present any recycling problems (variations in state and county recycling programs make it difficult to generalize).
4ECHNICAL¬!SSISTANCE Give us a call if you need technical assistance 1.800.225.1437 (U.S. & Canada Only) I +1.856.825.1100 Business hours: 8:00 AM to 5:00 PM EST in U.S.A.
WHEATON
2EUSE In the laboratory or industrial setting, coated containers can be washed, dried, and reused, perhaps for the collection of hazardous waste in the laboratory.
2ECYCLE
For large quantity industrial or laboratory applications, recycling coated glass containers, as a whole, can create two problems: the grinding of the coated glass into cullet could be difficult, and the PVC in the glass furnace might create organic chlorides in the glass mixture which would affect the final pH of the glass. Also, if a hazardous material was packaged in the containers, many recyclers do not want to accept the glass. The plastic coating can be cut and peeled from the container and the glass and the plastic jacket recycled, but for safety reasons this is not recommended. Both glass and PVC are recyclable materials. Stripped coatings are recycled into garden hoses and floor mats.
1.800.225.1437 (U.S. & Canada only) | +1.856.825.1100 | +1.856.825.1368 (F) | www.wheatonsci.com
179
4ECHNICAL¬$ATA ¬Glass
,ANDlLL Coated containers can be crushed and safely landfilled. The plastic jacket is made of PVC material, which is very chemically stable and does not leach out harmful chemicals into groundwater. In fact, PVC is often used to make liners for landfill sites.
)NCINERATE Coated containers can be incinerated. PVC is often blamed for the release of toxic dioxins and hydrochloric acid (HCL). However, research has shown that dioxins and hydrochloric acid are generated no matter what amount of PVC is present in the waste. Incinerator operating conditions and temperatures determine the amounts produced. Hydrochloric acid, which can cause acid rain, can be controlled in a modern incinerator equipped with a proper scrubber. The safety coating was developed to contain the glass fragments and allow for a controlled release of the contents in the event of container breakage. In addition, the coating adds impact, thermal shock, and slip resistance, prevents flying fragments and cuts, and reduces risk of chemical exposure and inhalation. Few, if any, alternative-coating materials have been found that perform as well or better than PVC plastisol.
'ENERAL¬#LEANING¬OF¬'LASSWARE Handle glassware carefully. Most damage to glassware occurs during cleaning. Glassware should be washed as soon as possible after use to avoid caking of residue. It is important not to let soiled glassware dry out. If immediate cleaning is not possible, the glassware should be put to soak in water. Use of a cleaning agent is recommended. Glassware should not to be cleaned with harsh or abrasive cleaners. It is recommended that a mild detergent or non-abrasive cleaner be used. Hard utensils, wire brushes or bottle brushes with wire cores, should not be used for cleaning. It is recommended that a sponge brush that is soft and flexible be used. Scratched glassware is prone to breakage during freezing or heating. After washing, the glassware should be rinsed with tap water to remove any cleaning agent residue. After the tap water rinse, the glassware should be rinsed with distilled or deionized water. Dry the glassware inverted on racks or pegboards. Inspect the glassware for chips, cracks, and scratches on the inside and outside. Do not use glassware with visible signs of damage.
2ECYCLING¬'LASS Most household glass containers are manufactured from soda-lime glass. All of our soda-lime glass may be recycled in the same manner after performing any necessary decontamination procedures. Borosilicate glass must not be mixed and recycled with soda-lime glass.
!PPLICATION¬.OTES ___________________________________________________________________________________________________________ ___________________________________________________________________________________________________________ ___________________________________________________________________________________________________________ ___________________________________________________________________________________________________________ ___________________________________________________________________________________________________________ ___________________________________________________________________________________________________________ ___________________________________________________________________________________________________________ ___________________________________________________________________________________________________________ ___________________________________________________________________________________________________________ ___________________________________________________________________________________________________________ ___________________________________________________________________________________________________________ ___________________________________________________________________________________________________________ ___________________________________________________________________________________________________________ ___________________________________________________________________________________________________________ ___________________________________________________________________________________________________________ ___________________________________________________________________________________________________________ ___________________________________________________________________________________________________________ ___________________________________________________________________________________________________________ ___________________________________________________________________________________________________________ ___________________________________________________________________________________________________________ ___________________________________________________________________________________________________________ WHEATON
1.800.225.1437 (U.S. & Canada only) | +1.856.825.1100 | +1.856.825.1368 (F) | www.wheatonsci.com
4ECHNICAL¬$ATA ¬Plastics 0LASTIC¬-ANUFACTURING¬4ERMINOLOGY "LOW¬-OLD Cavity that receives the Preform, which will be blown into the desired shape.
"LOW¬0IN Used in Extrusion Blow Molding. Hollow tube that pierces Preform and introduces air to blow Preform into shape of Blow Mold.
#AVITY That part of the mold, which contains the reverse image of the product being formed.
#OLD¬2UNNER Flow channel for heat-softened polymer, which goes from the Plastifier to the mold cavities. Polymer in the flow channel is cooled with shaped parts in cavities and is later removed, reground, and reused.
#ORE
)NJECTION¬3TRETCH¬"LOW¬-OLDING
That part of a mold that allows the internal shaping of a product such as the internal threads of a cap.
A molding process whereby Preforms are introduced into a cavity, stretched axially by a Stretch Rod, and then blown circumferentially to the shape of the Blow Mold cavity.
#ORE¬2OD
-ELT¬)NDEX
Used in Injection Blow and Injection Stretch Blow Molding. Used in conjunction with a Preform Mold to manufacture a Preform. The Preform is formed around the Core Rod creating a hollow tube, which will then be transferred to a Blow Mold where air will be introduced forcing the Preform to take the shape of the Blow Mold cavity.
The amount, in grams, of a thermoplastic resin, which can be forced through a 0.0825 inch orifice when subjected to 2160 gms. force in 10 minutes at 190°C.
-OLD Contains the cavity or cavities of a desired part in which a heat-softened polymer is shaped.
%XTRUSION¬"LOW¬-OLDING A molding process whereby heat-softened polymer is forced into the shape of a hollow tube. While still soft, a mold closes around the tube, pinching the top and bottom of the tube closed. A Blow Pin is introduced, and air is forced through the pin forcing the tube to take the shape of the Blow Mold cavity.
&LAME¬4REATING
-OLD¬3EAM A line formed at the point of contact of the Mold halves.
.ECK¬2ING Part of the mold assembly, which forms the neck and finish of a container.
A method of rendering inert thermoplastic objects receptive to inks, lacquers, paints, adhesives, etc. in which the object is bathed in an open flame to promote oxidation of the surface of the article. Polyolefins (HDPE, LDPE, PP, etc) are primarily those polymers that are flame treated.
&LASH Extra plastic attached to molded ware along the parting line, which must be removed before the part can be considered finished.
'ATE Used in Injection, Injection Blow, and Injection Stretch Blow Molding. The orifice through which the heat-softened polymer enters the cavity.
(OT¬2UNNER Flow channel for heat-softened polymer, which goes from the Plastifier to the mold cavities. Polymer in the flow channel is kept softened so there is no runner material to grind up and reuse.
(OPPER Conical feed reservoir into which polymer pellets are loaded. These pellets then fall into a heated barrel (Plastifier), sometimes through a metering device.
)NJECTION¬"LOW¬-OLDING
.OZZLE Hollow cored orifice that is screwed into the extrusion end of the Plastifier. The nozzle is designed to form a seal under pressure between the Plastifier and the Mold or Runner system. The front end of a nozzle may be either flat or spherical in shape.
0LASTIlER Assembly whereby polymer pellets are fed from a Hopper into a barrel where they drop onto a turning screw which forces the pellets forward. Heater bands wrapped around the barrel melt the pellets as they are forced forward along the inside of the barrel. The molten polymer is then forced out the end of the barrel through the Nozzle.
0REFORM Used in Blow Molding processes. Heat-softened polymer is formed into a shape similar to a thick test tube with neck threads. This tube is subsequently inflated while inside a Blow Mold to create the shape of the desired article.
2EGRIND A thermoplastic from a processor’s own production that has been reground or re-pelletized after having been previously processed by molding.
A molding process in which heat-softened polymer is injected from a Plastifier into a mold cavity creating a Preform, which is then transferred to a Blow Mold where air is blown into the Preform, forcing it to take the shape of the Blow Mold cavity.
2ELEASE¬!GENT
)NJECTION¬-OLDING
Used in Injection Stretch Blow Molding. A rod that is introduced into the Preform to stretch it in an axial direction prior to the Preform being blown into the shape of the cavity.
A molding process whereby a heat-softened polymer is injected from a Plastifier into a relatively cool cavity, which gives the article the desired shape.
A lubricant that facilitates molding.
3TRETCH¬2OD
4HERMOPLASTIC Material that will repeatedly soften when heated and harden when cooled. WHEATON
1.800.225.1437 (U.S. & Canada only) | +1.856.825.1100 | +1.856.825.1368 (F) | www.wheatonsci.com
180
181
4ECHNICALÂŹ$ATA ÂŹPlastics 0OLYETHYLENEÂŹ4EREPHTHALATEÂŹ 0%4
0LASTICÂŹ2ESINS Listed below are the primary resins used in the manufacture of our products. Following are some of the characteristics and features of these resins.
#YCLOÂŹ/LElNÂŹ#OPOLYMERÂŹ #/# Family of highly transparent plastic, which features high moisture barrier and excellent chemical resistance properties. Poor gas barrier properties. Sterilizable via EtO, radiation and certain grades can be steam autoclaved. SPI resin identiďŹ cation code number - (7).
(IGHÂŹ$ENSITYÂŹ0OLYETHYLENEÂŹ ($0% Flexible but more rigid than LDPE. Natural color is milky white, semi-translucent depending on density. Good impact strength and stress crack resistance. Good chemical resistance. Good vapor barrier but poor gas barrier. Sterilizable via EtO or gamma radiation. SPI resin identiďŹ cation code number - (2).
,OWÂŹ$ENSITYÂŹ0OLYETHYLENEÂŹ ,$0% Very ďŹ&#x201A;exible, natural milky color, translucent with high impact strength. Excellent for mild and strong buffers, good chemical resistance. Good water vapor and alcohol barrier properties. Poor gas barrier, sterilizable with EtO or gamma radiation. Good stress crack and impact resistance. SPI resin identiďŹ cation code number - (4).
0OLYBUTYLENEÂŹ4EREPHTHALATEÂŹ 0"4 Good chemical resistance, clear color, resistant to water, weak acids and bases at room temperature. Can be sterilized by EtO and autoclaving, at temperatures up to 180°C. SPI resin identiďŹ cation code number - (7).
0OLYCARBONATEÂŹ 0# Rigid and strong, Excellent clarity. High impact strength. Poor barrier properties. SPI resin identiďŹ cation code number - (7).
Semi-rigid to rigid depending on wall thickness. Natural color - clear and transparent. Good alcohol and solvent barrier; good gas and fair moisture barrier. Good to fair chemical barrier; not good for strong acids or bases. Good moldability. Sterilizable through EtO and gamma radiation. Good stress crack and impact resistance at room temperature and above. SPI resin identiďŹ cation code number - (1).
0OLYPROPYLENEÂŹ 00 Rigid, solid, durable in container or cap forms. Opaque, natural grayish yellow in natural form. Excellent stress crack and impact resistance. Excellent moisture barrier, good oil and alcohol barrier, poor gas barrier properties. Good chemical resistance. Sterilizable with EtO or autoclaving. SPI resin identiďŹ cation code number - (5).
0OLYSTYRENEÂŹ 03 PS is a transparent, rigid and glass-like polymer. Good resistance to inorganic chemicals. Light and heat stable, biologically inert and non-toxic. Poor impact and stress crack resistance, poor barrier properties. EtO or Gamma sterilizable. SPI resin identiďŹ cation code number - (6).
0OLYVINYLÂŹ#HLORIDEÂŹ 06# Flexible to rigid. Good for coatings; fair water and good oxygen barrier. Transparent to yellowish color in natural state. Good chemical resistance. Sterilizable by EtO. Good impact and some stress crack resistance. Poor recycling due to chloride residues. SPI resin identiďŹ cation code number - (3).
4EmONÂ&#x161;ÂŹ 4&% ÂŹ&%0 ÂŹ0&! TetraďŹ&#x201A;ouroethylene, ďŹ&#x201A;uorinated ethylene propylene. All TeďŹ&#x201A;onÂŽ plastics feature opaque characteristics, excellent chemical resistance, good heat stability and thermal shock resistance. All are autoclavable, heat, and gas sterilizable. SPI resin identiďŹ cation code number - (7).
4ABLE 4YPICAL0ROPERTIESOF0LASTICS Max. Temp °C Transparency Sterilization* * Autoclave Gas Dry Heat Radiation Disinfectants Density g/cm3 Flexibility Brittleness Temp °C Tensile Strength, psi
COC*
HDPE
LDPE
PET
PP
PS
PVC
TFE
140 transp
120 transl
80 transl
60 transp
135 transl
70 transp
70 transl
240 opaq
yes yes no yes yes 1.02 rigid +20 9600
no yes no yes yes 0.95 semi -100 4000
no yes no yes yes 0.92 ďŹ&#x201A;ex -100 2000
no yes no yes yes 1.33 semi -10 8000
yes yes no no yes 0.90 rigid 0 5000
no yes no yes no 1.06 rigid +20 6000
no yes no no yes 1.34 rigid -30 5000
yes yes yes no yes 2.15 rigid -110 4000
* TopasÂŽ 6015 resin **Depends on thickness and relates to containers and caps. Because there are many grades of resins and processing methods, the above information should be used as a general guideline only.
4ABLEÂŹ ÂŹ0ERMEABILITYÂŹOFÂŹ0LASTICS COC*
HDPE
LDPE
PET
PP
PS
PVC
TFE
N2
See Note 1
â&#x20AC;&#x201D;
42
180
0.8
44
50
2
â&#x20AC;&#x201D;
O2
See Note 1
180
150
500
5
90-140
185-485
4
â&#x20AC;&#x201D;
CO2
See Note 1
â&#x20AC;&#x201D;
580
2700
15
650
1160
4
â&#x20AC;&#x201D;
Moisture See Note 2
0.2
0.3
1.3
2.0-4.0
0.3-0.7
8.5
1.0-5.0
â&#x20AC;&#x201D;
Note 1: Units are cc x mil /100 in2 x day x atm @ 25°C Note 2: Units are g x mil /100 in2 x day @ 38°C, 50 - 90% RH
WHEATON
1.800.225.1437 (U.S. & Canada only) | +1.856.825.1100 | +1.856.825.1368 (F) | www.wheatonsci.com
4ECHNICAL¬$ATA ¬Plastics
182
&ACTORS¬FOR¬THE¬3ELECTION¬OF¬A¬0LASTIC¬#ONTAINER
P
lastic containers have been developed for a variety of applications across many different industries over the years. There are many different types of Polymers used in the creation of these containers to help fill the demands for the various applications. Polymers offer a variety of properties, each having different levels of importance with different users depending on the application. Some users may have flexibility within their product formula or filling process and therefore focus on economical containers while others may need containers that are stronger, autoclavable, transparent, sterilized, etc., therefore requiring more specifications. Wheaton Science Products can help with polymer selection through comprehension of the customer’s product, goals, and adaptability. Several questions should be posed to gather this understanding. Some examples include: • What is the container size and physical design. Narrow mouth vs. wide mouth, tall vs. short, etc.? • Must the package be transparent, translucent, opaque or colored for either marketing or light protection? • Are there specific shipment and storage conditions such as refrigeration, freezing, exclusion of light, etc.? • Are there governmental regulations pertaining to the product? • How is the product going to be dispensed by the user? • Have any tests been run in plastic? Was it unsuccessful and why? What type of plastics?
WHEATON
Many things govern polymer suitability for package use. These include: • • • • • • • • •
Permeation/Barrier Sorption Characteristics Chemical Resistance Stress Crack Resistance Rigidity/Flexibility Impact Resistance Sterilizability Recyclability Temperature Resistance
1.800.225.1437 (U.S. & Canada only) | +1.856.825.1100 | +1.856.825.1368 (F) | www.wheatonsci.com
183
4ECHNICALÂŹ$ATA ÂŹPlastics 4ABLEÂŹ ÂŹ0ACKAGEABILITYÂŹOFÂŹ0LASTICÂŹ#ONTAINERSÂŹ Requirement
COC
PC
PE
PET
PP
PS
PVC
Light weight
3
6
2
5
1
3
6
Clarity
1
1
3
1
2
1
1
Toughness
6
3
1
2
3
9
8
Water adsorption
1
6
2
3
2
4
2
Water vapor permeability
1
7
2
5
2
5
4
CO2 permeability
6
1
6
2
5
9
3
O2 permeability
7
8
7
2
6
8
2
Resistance: Acids
2
4
2
4
2
4
2
Resistance: Alkalis
2
7
2
2
2
2
2
Resistance: Oils
5
4
4
2
3
4
2
Resistance: Solvents
3
6
3
2
3
6
4
Resistance: High Humidity 1
6
1
1
1
1
1
Resistance: Sunlight
4
4
4
1
4
5
5
Resistance: Heat (hot ďŹ ll) 1
1
3
1
2
5
1
Resistance: Cold
1
1
2
4
5
9
5
This chart is a generalization to aid in selection; there are many forms, thicknesses and various copolymers and additives available. The lower the number, the better the property. 1=Excellent; 9=Poor.
"IOLOGICALÂŹ0ROPERTIESÂŹOFÂŹ0LASTICS Plastic products and containers are considered to be biologically inert. For example polyethylenes, TeďŹ&#x201A;ons, polypropylene, polystyrene, and polycarbonate are considered to be non-toxic to cell cultures. Distilled water for preparing culture media can be collected and stored in polyethylene containers.
$ETERMININGÂŹAÂŹ0LASTICÂŹ#ONTAINERÂŹÂŹ 4HREADÂŹ&INISH When a container ďŹ nish is designated as 24-410, it means that the diameter across the outside of the threads is approximately 24 mm. (See â&#x20AC;&#x153;Tâ&#x20AC;? dimension on illustration.) The 410 designates a speciďŹ c style of thread. Tables 10a and 10b show average dimensions for comparison and to aid in sizing. The actual dimensions may vary slightly.
WHEATON
/PENINGÂŹ$IMENSIONÂŹOFÂŹÂŹ 0LASTICÂŹ#ONTAINERSÂŹWITHÂŹ 4HREADÂŹ&INISH The minimum opening dimension (I) of a plastic container can be found if the containerâ&#x20AC;&#x2122;s thread ďŹ nish is known. If the thread size of the container is 38-400, the (I) can be determined from either Table 10a or 10b by looking down the â&#x20AC;&#x153;Tâ&#x20AC;? Dimension column (far left) until you ďŹ nd the number 38. Follow this row to the right, until you come to the â&#x20AC;&#x153;Iâ&#x20AC;? min. column that is listed under the number 400. This number is the minimum opening of the container. The opening can be larger, but it should not be smaller.
1.800.225.1437 (U.S. & Canada only) | +1.856.825.1100 | +1.856.825.1368 (F) | www.wheatonsci.com
4ECHNICAL¬$ATA ¬Plastics 4ABLE¬ A ¬0LASTIC¬4HREAD¬&INISH¬$IMENSIONS¬(Dimensions are in inches) "T” Dim (mm)
13 15 18 20 22 24 28 30 33 35 38 40 43 45 48 51 53 58 60 63 66 70 75 77 83 89 100 110 120
400
410
415
425
“H”
“I” min
“H”
“I” min
“H”
“I” min
“H”
“I” min
— — 0.371 0.371 0.371 0.400 0.400 0.403 0.403 0.403 0.403 0.403 0.403 0.403 0.403 0.408 0.408 0.408 0.408 0.408 0.408 0.408 0.408 0.487 0.487 0.535 0.597 0.597 0.685
— — 0.325 0.404 0.483 0.516 0.614 0.653 0.791 0.875 0.987 1.091 1.165 1.251 1.381 1.479 1.578 1.735 1.853 1.972 2.090 2.247 2.424 2.546 2.753 2.918 3.344 3.737 4.131
— — 0.523 0.554 0.585 0.646 0.708 — — — — — — — — — — — — — — — — — — — — — —
— — 0.325 0.404 0.483 0.516 0.614 — — — — — — — — — — — — — — — — — — — — — —
0.452 0.557 0.617 0.742 0.837 0.957 1.082 — — — — — — — — — — — — — — — — — — — — — —
0.218 0.258 0.325 0.404 0.483 0.516 0.614 — — — — — — — — — — — — — — — — — — — — — —
0.310 0.310 — — — — — — — — — — — — — — — — — — — — — — — — — — —
0.218 0.258 — — — — — — — — — — — — — — — — — — — — — — — — — — —
4ABLE¬ B ¬0LASTIC¬4HREAD¬&INISH¬$IMENSIONS¬(Dimensions are in millimeters) “T” Dim (mm)
13 15 18 20 22 24 28 30 33 35 38 40 43 45 48 51 53 58 60 63 66 70 75 77 83 89 100 110 120
400
410
415
425
“H”
“I” min
“H”
“I” min
“H”
“I” min
“H”
“I” min
— — 9.42 9.42 9.42 10.16 10.16 10.24 10.24 10.24 10.24 10.24 10.24 10.24 10.24 10.36 10.36 10.36 10.36 10.36 10.36 10.36 10.36 12.37 12.37 13.59 15.16 15.16 17.40
— — 8.25 10.26 12.27 13.11 15.59 16.59 20.09 22.22 25.07 27.71 29.59 31.77 35.08 37.57 40.08 44.07 47.07 50.09 53.09 57.07 61.57 64.67 69.93 74.12 84.94 94.92 104.93
— — 13.28 14.07 14.86 16.41 17.98 — — — — — — — — — — — — — — — — — — — — — —
— — 8.25 10.26 12.27 13.11 15.59 — — — — — — — — — — — — — — — — — — — — — —
11.48 14.15 15.67 18.85 21.26 24.31 27.48 — — — — — — — — — — — — — — — — — — — — — —
5.54 6.55 8.25 10.26 12.27 13.11 15.59 — — — — — — — — — — — — — — — — — — — — — —
7.87 7.87 — — — — — — — — — — — — — — — — — — — — — — — — — — —
5.54 6.55 — — — — — — — — — — — — — — — — — — — — — — — — — — —
WHEATON
1.800.225.1437 (U.S. & Canada only) | +1.856.825.1100 | +1.856.825.1368 (F) | www.wheatonsci.com
184
185
4ECHNICAL¬$ATA ¬Plastics 3TERILIZATION¬OF¬0LASTICS
3TERILIZATION¬4ECHNIQUES
There are a variety of plastic materials and methods by which these plastic materials can be sterilized. However, not all plastics can be sterilized by every method. An understanding of sterilization methods, problems that can occur and terms associated with sterilization is helpful in determining plastic and plastic ware capability and performance. The following is presented to assist in gaining that understanding.
Sterilization techniques are designed to kill microorganisms. There are varieties of sterilization methods, however the three basic approaches used to sterilize plastic ware are:
%XPOSURE¬4O¬.ON 3TERILE¬#ONDITIONS¬#AUSES¬¬ .ON 3TERILITY While temperature and time used to melt thermoplastics kills microorganisms, manufactured ware will not remain sterile unless it is made and maintained in a sterile environment. Plastic ware is not “sterile as manufactured“ since: • ware is not blown with sterile air • ware may be exposed to non-sterile conditions immediately after manufacture • ware may contact non-sterile atmosphere, bags, boxes, personnel, etc. during packing after ware manufacture or during unpacking at the filling location. • low particulate does not mean sterile Producing ware under a shroud and using “particulate-free” or “low particulate” clean room bags does not result in sterile ware. These steps only reduce particulate in and on the ware to a lower level than would be present if ware were produced in an “unshrouded” production situation. In the future, molding may be performed in clean rooms and sterile conditions maintained after ware manufacture, however, until that time, ware cannot be represented as being sterile as molded. Until then, a secondary sterilization process must be performed.
• • •
Tests should always be run on plastic ware to determine suitability for a given sterilization method.
%THYLENE¬/XIDE Ethylene oxide (EtO) is a toxic, cancer causing gas. Technology and worker protection legislation allow continued EtO use. Most plastic can be EtO sterilized. EtO must contact the surfaces to be sterilized. There are several ways EtO sterilization can be accomplished.
¬
0URE¬%T/ Empty ware in an open bag or ware in a sealed bag with a “breather” window, is placed in a chamber. Air is evacuated and moisture introduced (dry microorganisms are resistant to EtO sterilization). Pure EtO is flooded into the chamber. Chamber internal pressure is kept lower than external pressure to ensure gas will not leak. Exposure time varies dependent on ware and bioburden. After exposure, the chamber is purged with filtered sterile air to eliminate residual EtO.
¬
$ILUTE¬%T/ Since it is safer than pure EtO, a 10-15% mixture of EtO with inert gas is used. Empty ware in an open bag or ware in a sealed bag with a “breather window” is placed in a chamber. Air is evacuated, and moisture is introduced (dry microorganisms are resistant to EtO sterilization). Dilute EtO is flooded into the chamber and the chamber's temperature increased up to 60°C (140°F). Exposure time of 4 to 24 hours varies dependent on ware, bioburden, and sterilization parameters. After exposure, the chamber is purged with filtered sterile air to eliminate residual EtO.
4ERMS¬!SSOCIATED¬WITH¬3TERILIZATION "IOBURDEN¬ This is the number of microorganisms (bacteria, virus, fungi, etc.) present. Microbiologists can test for these. When sterilizing ware, it is important to reduce or eliminate the bioburden to a safe level.
Most plastic ware is capable of being EtO sterilized. However, zinc stearate process aid, used in injection blow molding, can cause precipitants (particulate) to form in liquid products packaged in EtO sterilized ware.
0YROGENS A pyrogen, which means fever causing, is a remnant of bacteria that carries chemicals called endotoxins. Endotoxins can cause a fever if injected into a mammal. Detecting a fever in a rabbit after injecting it with an extract detects the presence of pyrogens. Something may be sterile, but still have pyrogens on it. Glass can be sterilized and de-pyrogenated at the same time. Exposure to high temperature (600°F or higher) will kill microorganisms AND burn up endotoxins. The higher the temperature, the shorter the exposure time needed for de-pyrogenation. Most plastic ware is incapable of being exposed to these high temperatures. Therefore, plastic ware may be sterilized but, if it needs to be de-pyrogenated, it is usually washed with pyrogen free water.
Ethylene Oxide (EtO) Steam Autoclave Radiation (gamma radiation, electron beam radiation)
Therefore, only special LDPE grades and colorants that do not require zinc stearate for injection blow molded ware should be used with EtO sterilization processes. Additionally, tests should always be run on plastic ware to determine suitability for a given sterilization method.
3TEAM¬!UTOCLAVE Autoclaving can sterilize empty OR filled, sealed ware. The effect of temperature AND moisture kills microorganisms. Autoclaving involves exposing ware for a time to steam. The autoclave acts like a pressure cooker allowing steam temperature to get above the boiling point of water (100°C=212°F). Typically, autoclaving is done at 15 psi (pounds per square inch) steam being at 121°C (250°F).
¬
!UTOCLAVING¬%MPTY¬7ARE Empty ware must withstand autoclaving temperature for the exposure time. If it does not, parts will distort. Of the common plastics, polypropylene (PP) and polycarbonate (PC) have enough
WHEATON
1.800.225.1437 (U.S. & Canada only) | +1.856.825.1100 | +1.856.825.1368 (F) | www.wheatonsci.com
4ECHNICAL¬$ATA ¬Plastics heat resistance to be autoclaved. Generally, PP homopolymer is slightly more heat resistant than PP copolymer. Also, there is a grade of a new transparent plastic material identified as a cyclic olefin copolymer (COC) that is capable of withstanding steam autoclave sterilization. If empty ware becomes distorted due to autoclave sterilization, it may be due to: • High stresses molded into the ware during manufacture • Unusual hot spots in the autoclave • Use of the wrong plastic Tests should always be run on plastic ware to determine suitability for a given sterilization method.
¬
!UTOCLAVING¬&ILLED ¬3EALED¬7ARE Autoclave sterilization of filled, sealed ware, is also known as “Terminal Sterilization”. Many companies prefer terminal sterilization IF their product can withstand the rigors. Autoclave temperature must be minimally 121°C (250°F). Of the common plastics, polypropylene (PP) and polycarbonate (PC) have enough heat resistance to be autoclaved. Also, there is a grade of a new transparent plastic material identified as a cyclic olefin copolymer (COC) that is capable of withstanding steam autoclave sterilization. However, autoclaving filled, sealed plastic ware is tricky. Tempera ture and pressure in the autoclave must be controlled and balanced with temperature and pressure being generated in the filled, sealed ware during autoclave heat up AND cool down. If not, ware could be crushed or ballooned. Special autoclaves are sold to enable this temperature/pressure balancing act. If filled, sealed containers become distorted during autoclave sterilization, it may be due to: • Improper balancing of temperature/pressure upon heating or cooling • High stresses molded into ware at the time of manufacture • Unusual hot spots within the autoclave chamber • Use of the wrong plastic Tests should always be run on plastic ware to determine suitability for a given sterilization method.
!UTOCLAVING¬#LOSURES Polypropylene (PP) closures should be capable of withstanding steam autoclave sterilization. However, autoclaving may cause blooming of additives in PP. PP homopolymer is more heat resistant than PP copolymer. Linerless closures (closures with specially molded-in sealing features) may or may not be acceptable for autoclaving dependent on many factors (e.g. as application torque, autoclave conditions, closure design, etc.) If a closure is lined, the liner and the adhesive used to affix the liner inside the closure must also be considered. Lastly, PP closures applied to containers present a special case. Closures are designed with tolerances that cause interference between the closure and container. This interference results in stress. Since all thermoplastics become softer as temperature increases, stress may be relieved or closure dimensions may change upon autoclaving. This can result in closure torque reduction or seal loss. If closures distort or a torque retention problem results, it may be due to:
• High stresses molded into ware at the time of manufacture • Unusual hot spots within the autoclave chamber • Use of the wrong plastic Due to moisture absorption, pulp liners are NOT anticipated to be acceptable for autoclaving. Tests should always be run on plastic ware and liner/adhesive combinations to determine suitability for a given sterilization method. WHEATON
¬ 2ADIATION Ware is exposed to ionizing radiation that knocks electrons off atoms it contacts. Ionizing radiation is lethal to microorganisms because of its destructive effect upon the contents of living cells. There are two common sources of ionizing radiation used for sterilization: • Cobalt 60 (gamma radiation) OR • Electron beam or E-beam (high energy electrons)
The amount of radiation from either Cobalt 60 or electron beam is measured in MegaRads (MRads) or KiloGrays (KGy). One MegaRad equals ten KiloGrays. Because gamma sterilization and E-beam both use radiation, packaging materials react similarly in both systems.
#OBALT¬ ¬'AMMA¬2ADIATION A gamma radiation sterilization facility consists of a thick walled concrete maze in a room built around a well filled with water. In the well are a number of pencil-sized steel rods impregnated with radioactive Cobalt. Articles to be sterilized are placed on conveyors that bring them through the concrete maze into the room where the radioactive rods are located. The number of rods raised from the well and the exposure time controls the degree of exposure. After exposure, ware is conveyed from the room via the maze. A radiation dose sufficient to kill bacteria and spores is about 2.5 MRads. To minimize costs plus attain sterilization, bioburden is determined then the minimum dosage plus a safety factor is selected. Gamma radiation has high penetrating power (about 50 cm or close to 20 inches of the same unit-density material). Thus, many parts can be packed together for sterilization. In this instance, the dosage reaching the center of ware multi-packs is validated. Slightly higher doses occur at the outside edges of multi-packs. Usually, empty packaging components are sterilized via gamma radiation. Since effects of radiation are cumulative, twice the normal dose is sometimes examined to insure minimal problems. Listed below are thermoplastic materials that are recognized as capable of being gamma radiation sterilized, although tests should always be run on plastic ware to determine suitability for a given sterilization method: • Low Density Polyethylene • Linear Low Density Polyethylene • High Density Polyethylene (those containing phosphite stabilizers may yellow) • Polyethylene Terephthalate • Polystyrene • Polycarbonate • Nylon • Cyclic Olefin Copolymers (a newly emerging group of polymers) • Polyethylene Naphthalate (a newly emerging group of polymers)
Problems can occur when gamma radiation sterilizing polyvinyl chloride (PVC) or fluoropolymers (Teflon, etc.) Important Note About Polypropylene Gamma Radiation Sterilization Normal PP grades yellow noticeably and exhibit long term embrittlement when sterilized via gamma radiation techniques. Special radiation resistant PP grades, having special stabilizers, are available for radiation sterilization. Also, if ware is to be colored, then the concentrate carrier should be a radiation resistant grade of PP. PP copolymers are more radiation resistant than PP homopolymers. Tests should always be run on plastic ware to determine suitability for a given sterilization method.
1.800.225.1437 (U.S. & Canada only) | +1.856.825.1100 | +1.856.825.1368 (F) | www.wheatonsci.com
186
187
4ECHNICAL¬$ATA ¬Plastics %LECTRON¬"EAM¬ % "EAM ¬2ADIATION An E-beam radiation sterilization facility consists of a protective maze built around an E-beam generator. The E-beam generator delivers a high dose of electrons focused in a narrow beam at the items to be sterilized. After exposure, ware is conveyed from the maze. A radiation dose sufficient to kill bacteria and spores is about 2.5 MRads. To minimize costs and attain sterilization, bioburden is determined and the minimum dosage plus a safety factor is selected. Electrons from the E-beam generator have limited penetrating power (a 10-MeV E-beam will penetrate only about 5 cm or 2 inches of a unit-density material). Thus, a limited number of parts can be packed together for sterilization. The dosage reaching the center of a ware multi-pack is validated. Higher dosages will occur at the outside edges of ware multi-packs. Usually, empty packaging components are sterilized via E-beam. Since effects are cumulative, twice the normal dose is sometimes examined to insure minimal problems.
2ESIN¬)DENTIlCATION¬#ODES Wheaton follows the Society of the Plastics Industry guidelines for marking plastic containers with the appropriate resin identification code numbers as shown below:
Listed below are thermoplastic materials that are recognized as capable of being electron beam radiation sterilized, although tests should always be run on plastic ware to determine suitability for a given sterilization method:
Recycling Plastic HDPE V
PETE
• Low Density Polyethylene
LDPE
• Linear Low Density Polyethylene • High Density Polyethylene (those containing phosphite stabilizers may yellow) PP
• Polyethylene Terephthalate
PS
OTHER
• Polystyrene • Polycarbonate • Nylon • Cyclic Olefin Copolymers (a newly emerging group of polymers) • Polyethylene Naphthalate (a newly emerging group of polymers)
Wheaton Science Products mold-marks our containers on the bottom with the appropriate resin identification code. These codes are to assist in identifying material used to manufacture ware to aid in recycling efforts.
1 = PETE (polyethylene terephthalate) (PET)
Problems can occur when E-beam sterilizing polyvinyl chloride (PVC) or fluoropolymers (Teflon, etc.)
2 = HDPE (high density polyethylene)
)MPORTANT¬.OTE¬!BOUT¬0OLYPROPYLENE¬% "EAM¬3TERILIZATION¬
4 = LDPE (low density polyethylene)
Normal PP grades yellow noticeably and exhibit long term embrittlement when sterilized via E-Beam. Special PP grades, having special stabilizers, are available for E-beam sterilization. Also, if ware is to be colored, then the concentrate carrier should be a radiation resistant grade of PP. PP copolymers are more radiation resistant than PP homopolymers. Tests should always be run on plastic ware to determine suitability for a given sterilization method.
3 = V (vinyl/polyvinyl chloride) (PVC)
5 = PP (polypropylene) 6 = PS (polystyrene) 7 = Other
DISCLAIMER: The data and information contained herein are limited to illustrative examples that are based on limited testing procedures. However, due to variable conditions of use and methods or processing, NO GUARANTEES OR WARRANTIES ARE EXPRESSED OR IMPLIED INCLUDING ANY IMPLIED WARRANTY OF MERCHANTABILTY OR FITNESS FOR PARTICULAR PURPOSE. Wheaton Science Products does not recommend any use that infringes patents. This data and information, and the products and processes described, are subject to change at any time without notice. Please contact your Wheaton Science Products representative with your specific packaging needs.
PET Media Bottle
WHEATON
1.800.225.1437 (U.S. & Canada only) | +1.856.825.1100 | +1.856.825.1368 (F) | www.wheatonsci.com
4ECHNICALÂŹ$ATA ÂŹPlug Styles 0LUGÂŹ3TYLES The following Plug Styles can be used with Wheaton magnetic stirrers, roller culture apparatus, incubators and pumps.
0LUGÂŹ#ODEÂŹh!v ÂŹÂŹ .ORTHÂŹ!MERICAÂŹ0LUG Bahamas Bolivia Brazil Canada Costa Rica Dominican Rep. El Salvador Ecuador Guam Peru
Guatemala Haiti Honduras Jamaica Korea, S Libya Nicaragua Norway Panama
Philippines Puerto Rico Saudi Arabia Singapore Sweden Taiwan United States Venezuela Virgin Islands
0LUGÂŹ#ODEÂŹh$v ÂŹ 5NITEDÂŹ+INGDOMÂŹ0LUG Bahrain Belgium Bermuda Cyprus England Myanmar Ghana Hong Kong Ireland Iraq Jordan (Rep. of)
Kuwait Malaysia Mauritius Malta Nigeria N. Ireland Oman Qatar Scotland Singapore Sudan
Tanzania Trinidad & Tobago United Arab Emirates United Kingdom Wales Zambia Zimbabwe Zimbabwe
0LUGÂŹ#ODEh"v ÂŹÂŹ *APANÂŹ0LUG
0LUGÂŹ#ODEÂŹh#v ÂŹÂŹ #ONTINENTALÂŹ%UROPEÂŹ0LUG
Bolivia Japan
Austria Belgium Bolivia Bulgaria Czech. Rep Estonia Finland France Germany Greece Hungary Iceland
Indonesia Latvia Lithuania Luxembourg Mozambique Netherlands Poland Portugal Romania Russia Slovakia Slovenia
Singapore Sweden Spain Tahiti Turkey USSR (former) Vietnam Yugoslavia (former) Zaire (Rep. of)
0LUGÂŹ#ODEÂŹh&v ÂŹ !USTRALIA #HINAÂŹ0LUG
0LUGÂŹ#ODEÂŹh'v ÂŹÂŹ )TALY #HILEÂŹ0LUG
0LUGÂŹ#ODEÂŹh*v ÂŹ )NDIAÂŹ0LUG
Argentina Australia China (Peopleâ&#x20AC;&#x2122;s Rep. of) Fiji New Zealand Papua New Guinea Uruguay
Chile Italy
Bangladesh India Pakistan South Africa Sri Lanka Uganda
3PECIALÂŹ0LUGÂŹ3TYLES 0LUGÂŹ#ODEÂŹh)v ÂŹÂŹ $ENMARKÂŹ0LUG
0LUGÂŹ#ODEÂŹh+v ÂŹÂŹ )SRAELÂŹ0LUG
0LUGÂŹ#ODEÂŹh,v ÂŹÂŹ 3WITZERLANDÂŹ0LUG
Denmark Greenland
Israel Jamaica
Switzerland
Additional plug styles are available through special order. Please contact Technical Service for additional information. WHEATON
1.800.225.1437 (U.S. & Canada only) | +1.856.825.1100 | +1.856.825.1368 (F) | www.wheatonsci.com
188
189
)NDEX ¬Alphabetical
A
BOTTLES , continued… Graduated Valumetric .............................................................................. 10 Hybridization........................................................................................... 11 Jars, Straight-Sided, Clear ......................................................................... 9 Jug, HDPE .............................................................................................. 26 Jugs, Glass............................................................................................. 16 Lab 45 ........................................................................................... 13, 108 Lab/Media ................................................................................... 12-13, 30 Labeled Reagent ..................................................................................... 14 Labeled, Safety Coated............................................................................ 17 Leak Resistant ........................................................................................ 29 Media ......................................................................................... 12-13, 30 Mounting Media.................................................................................... 137 Narrow Mouth, Plastic ............................................................................. 29 Oil Sample.............................................................................................. 10 PET, Media, Round .................................................................................. 26 PET, Media, Square ................................................................................. 30 Plastic ...............................................................................................21-30 Reagent, All Glass ................................................................................... 14 Reservoir, Safety Coated .......................................................................... 15 Roller Culture.......................................................................................... 15 Round Bottles, Plastic ............................................................................. 26 Safety Coated, Amber.............................................................................. 16 Safety Coated, Clear ............................................................................... 16 Safety Coated, Lab/Media........................................................................ 17 Safety Coated, Reservoirs ........................................................................ 15 Safety Coated, Solution ........................................................................... 17 Sample, for Sub-Surface Grab Samplers .........................................131-132 Sample, Glass, Oil ................................................................................... 10 Sample, Graduated ................................................................................. 10 Screw Neck Diagnostic...............................................................18, 22, 108 Serum, Amber ................................................................................ 19, 109 Serum, Clear .................................................................................. 19, 109 Serum, HDPE.......................................................................................... 20 Serum, Polypropylene ............................................................................. 19 Snap Cap ............................................................................................... 20 Solution, Safety Coated ........................................................................... 17 Spray ..................................................................................................... 30 Square, Plastic........................................................................................ 30 Standard Wide Mouth................................................................................ 9 Stoppered, Glass..................................................................................... 14 Straight Sided Jar ..................................................................................... 9 TCLP Extraction ........................................................................................ 5 Uni-Dose, Glass, Amber........................................................................... 20 Uni-Dose, Plastic .................................................................................... 20 Valumetric .............................................................................................. 10 Wide Mouth Blake Packer, HDPE .............................................................. 27 Wide Mouth Round Packer, HDPE ............................................................ 27 Wide Mouth Jars, Polypropylene .............................................................. 28 Wide Mouth Jars, Polystyrene .................................................................. 28 Wide Mouth Jars, HDPE .......................................................................... 28 Wide Mouth, Glass, Amber ...................................................................... 11 Wide Mouth, Glass Stoppered .................................................................. 14 Wide Mouth, Packers, Amber ................................................................... 11 Wide Mouth, Glass, Clear ................................................................. 7, 9-10 Wide Mouth, Plastic ...........................................................................27-28 Boerner Micro Test Slide ................................................................................ 137 Boston Round Bottle .......................................................................................7-8 Bottle Stoppers ................................................................................................. 3 Bottle Top Dispensers ...............................................................................99-106 Boxes, Cryule ................................................................................................ 142 Boxes, Vial .................................................................................................... 149 Brushes, Cleaning ......................................................................................... 105 Burners, Alcohol ............................................................................................ 137
ABS Plates...................................................................................................... 47 Absorber, Tube ...........................................................................................67-68 AC Round Bottle................................................................................................ 7 Acura Micropipettes (see Pipettes) Acurex Bottle Top Dispensers (see Dispensers) Adapters Bottle Top ............................................................................................. 101 Clear-Seal Connecting............................................................................. 66 Connecting ............................................................................................. 66 Thermometer.......................................................................................... 66 Air Powered Crimper ....................................................................................... 35 Alarm System ................................................................................................. 60 Alcohol Burner .............................................................................................. 137 Alternative Feed Sources ............................................................................... 105 Aluminum Seals (see Caps & Closures) Aluminum Weighing Dishes ............................................................................. 82 AMPULES ............................................................................................. 1-2, 107 Cryule Crogenic ........................................................................................ 1 Vacule, Lyophilization ......................................................................... 1,107 Pre-Scored ........................................................................................... 107 Arsine Generators ........................................................................................... 67 Aspiration Feed Sources ................................................................................ 105 Autosampler Vials Convenience Packs ..................................................... 87-88, 90-92, 94-95 Crimp Top......................................................................................... 88, 89 E-Z Vial ............................................................................................ 88, 89 Headspace ............................................................................................. 91 Limited Volume Insert (LVI) ....................................................................... 92 Plastic with Glass Inner Cone ................................................................... 93 Polypropylene ......................................................................................... 93 Shell ...................................................................................................... 87 Snap Caps ............................................................................................. 89 Autosampler Vial Selector Guide ..................................................................83-84 Autosampler Vial Sizer ................................................................................85-86
B Balsam Bottle ............................................................................................... 137 Bar Coded Containers.................................................................................... 133 Barnes Dropping Bottles .................................................................................... 5 Battery Backup Systems ............................................................................ 60, 63 Bench Top Roller Rack ..................................................................................... 58 Bioreactors ................................................................................................54-56 Biostir Magnetic Stirrers .................................................................................. 53 Bleed Tube................................................................................................ 70, 72 BOD Bottles & Accessories .............................................................................3-4 Aerator..................................................................................................... 4 Cap.......................................................................................................... 4 Rack ........................................................................................................ 4 Stopper Leash .......................................................................................... 4 Bomb Sampler, Stainless Steel ....................................................................... 129 BOTTLES ....................................................................................................3-28 AC Round ................................................................................................. 7 Balsam................................................................................................. 137 Blake ..................................................................................................... 27 BOD ......................................................................................................... 3 Boston Round ........................................................................................7-8 Cylinder Round, Plastic............................................................................ 26 Diagnostic .................................................................................18, 22, 108 Dispensing, LDPE.................................................................................... 22 Dropping ...........................................................................................23-25 Dropping, Barnes ...................................................................................... 5 Dropping, Glass, Amber ............................................................................. 5 Dropping, Glass, Clear ............................................................................... 5 Dropping, LDPE .................................................................................23-25 Dropping, with Extended Controlled Tip..................................................... 25 Dropping, with Filter Dropping Tip ............................................................ 25 Dropping, with Streaming Tip ................................................................... 25 Dropping, Vial File ................................................................................... 25 Extraction ................................................................................................. 5 French Squares ........................................................................................ 8 General Purpose Plastic .....................................................................26-28 General Purpose Glass .........................................................................6-11 WHEATON
C Calibra Digital Macropipettes ..................................................................117-118 Calibrex Digital 520 & 521 Bottle Top Dispenser ........................................99-100 Cannulas, Dispensing .............................................................................105-106 CAPS & CLOSURES...................................................................................31-42 Pennyhead ............................................................................................... 3 Robotic .................................................................................................... 3 Snap-On ................................................................................................ 34 Straight Plug......................................................................................... 110
1.800.225.1437 (U.S. & Canada only) | +1.856.825.1100 | +1.856.825.1368 (F) | www.wheatonsci.com
)NDEX ¬Alphabetical CAPS & CLOSURES, continued… Thin Flange .................................................................................... 18, 108 Ultra Pure ............................................................................................. 110 Aluminum Seals ............................................................................................ 32 Flip Cap ................................................................................................. 33 Lined ..................................................................................................... 32 Septa ..................................................................................................... 33 Unlined .......................................................................................... 32, 109 Tamper Evident ................................................................................. 20, 32 Cap Liner Liner, TLCP ............................................................................................... 5 Specifications ..................................................................................... 6, 31 Screw Caps ...................................................................................... 37-42, 110 Autoclavable ........................................................................................... 39 Black Phenolic ..................................................................12-13, 17, 37-38 Cap Liner Specifications .......................................................................... 31 Colored .................................................................................................. 42 Dropper Bottle Caps ................................................................................ 24 E-Z Ex-Traction ....................................................................................... 41 Glass Filled ............................................................................................. 41 I-Loc .........................................................................................18, 42, 108 Inserts.................................................................................................... 38 Lab 45 ................................................................................13, 17, 41, 108 Liquid Scintillation ................................................................................... 38 Microlink ................................................................................................ 39 Open Top...........................................................................................38-39 PBT ....................................................................................................... 41 Polybutylene Terephthalate ...................................................................... 41 Polyproylene ......................................................................................40-42 Pour Rings ................................................................................13, 41, 108 Septa ..................................................................................................... 38 Snap Cap ......................................................................................... 20, 42 Solid Top ...........................................................................................37-42 TLCP........................................................................................................ 5 Vented Cap ...................................................................................... 15, 42 Stoppers, Rubber .....................................................................................33-34 2 & 3-Leg ................................................................................. 33-34, 110 Ampule, 11mm................................................................................. 1, 107 Complete Coat ................................................................................ 33, 110 Fluorinated Polymer ........................................................................ 33, 110 Gray Chlorobutyl ................................................................................... 110 Gray Chlorobutyl-Isoprene Blend ............................................................ 110 Gray Halobutyl ...................................................................................... 110 Igloo .............................................................................................. 33, 110 Lyophilization .....................................................................13, 18, 108, 110 Natural Red Rubber................................................................................. 34 Premium ........................................................................................ 33, 110 Sleeve Style ............................................................................................ 34 Snap-On ................................................................................................ 34 Straight Plug................................................................................... 34, 110 Teflon Faced ........................................................................................... 34 Thin Flange ...............................................................................18, 34, 108 Ultra Pure ....................................................................................... 33, 110 CART (Computer Aided Roller Technology)......................................................... 63 CELL CULTURE Battery Backup ....................................................................................... 60 Bench Top .............................................................................................. 58 Biopro PC Software ................................................................................. 57 BioStir Magnetic Stirrer ........................................................................... 53 Bottles, Roller ......................................................................................... 15 CART2 .................................................................................................... 63 Cell Optimizer System ............................................................................. 54 Celstir .................................................................................................... 51 Cold Finger....................................................................................... 54, 55 Control Tower ......................................................................................... 56 Cost Buster Roller Apparatus ................................................................... 60 C-Tubes ................................................................................................. 49 Flasks .................................................................................................... 49 Flasks, Trypinizing ................................................................................... 50 Heating Wrap.....................................................................................54-55 High Volume Production Roller Apparatus ............................................59-63 Incubator, CO2 ........................................................................................ 64 Incubator, Roll-in ..................................................................................... 64 Magna Flex Microcarrier .......................................................................... 52 WHEATON
CELL CULTURE, continued… Magnetic Stirrers .................................................................................... 53 MantaRay ............................................................................................... 51 Micro-Stir Magnetic Stirrer ...................................................................... 53 Mini Bottle Roller Apparatus..................................................................... 58 Mini Pilot Plant ....................................................................................... 55 Modular Cell Production Roller Apparatus ................................................. 61 Overdrive Cell Culture System .................................................................. 56 Production Roller Apparatus................................................................59-63 R2P, Research to Production Roller Apparatus ........................................... 62 Remote Control....................................................................................... 53 Roller Culture Apparatus .....................................................................58-63 Roll-In Incubator ..................................................................................... 64 Rotation Alarm System ............................................................................ 60 Small Bottle Roller Apparatus ................................................................... 58 Software ................................................................................................ 63 Spinner Flasks ...................................................................................51-52 Stirrers, Magnetic ................................................................................... 53 Tissue Grinders..................................................................................43-46 Cell Optimizer System...................................................................................... 54 Cell Production Roller Apparatus .................................................................59-63 Celstir Spinner Flasks ...................................................................................... 51 Chambers, TLC Developing .............................................................................. 97 CHEMISTRY GLASSWARE .........................................................................65-81 Arsine Generator..................................................................................... 67 Chemistry Kits ...................................................................................70-72 Clamps .................................................................................................. 65 Clear-Seal Connecting Adapter ................................................................ 66 Clear-Seal Grease Free Joints .................................................................. 66 Clear-Seal Outer Joints ........................................................................... 66 Cyanide Distillation Kits ........................................................................... 67 Diazomethane Generators ....................................................................... 68 Kuderna Danish Concentors ...............................................................68-69 Micro Chemistry Kit............................................................................70-71 Semi-Micro Chemistry Kit ........................................................................ 72 Soxhlet Extraction Apparatus ................................................................... 69 Thermometer Adapter ............................................................................. 66 The Wheaton Connection......................................................................... 65 Wheaton Micro Kit .............................................................................70-71 Wheaton Semi-Micro Kit.......................................................................... 72 Chemistry Kits............................................................................................70-72 CHROMATOGRAPHY..................................................................................83-98 ABC Screw Cap ...................................................................................... 94 ABC Vials ............................................................................................... 94 Aluminum Seals, 11 mm ......................................................................... 89 Autosampler Vial Selector Guide .........................................................83-84 Autosampler Vial Sizer........................................................................85-86 Autosampler Vials ..............................................................................83-96 Chromatographic Spray Bottle ................................................................. 98 Convenience Packs ..................................................... 87-88, 90-92, 94-95 Crimp Top Vial, Standard Opening ............................................................ 89 Crimp Top Vials .......................................................................88-90, 92-93 Crimp/Snap Vial ................................................................................ 89, 93 Developing Chambers ............................................................................. 97 E-Z Aluminum Seal, 11 mm..................................................................... 89 E-Z Vial with Snap/Crimp Top................................................................... 89 E-Z Vials................................................................................................. 88 Headspace Pressure Release Seals.......................................................... 91 Headspace Vials ..................................................................................... 91 LC Column ............................................................................................. 97 Limited Volume Insert ..............................................................87-89, 94-95 LVI Vials.............................................................................................92-93 Plastic Vials ............................................................................................ 93 Reagent Sprayer ..................................................................................... 98 Sample Recovery Tube ............................................................................ 97 Screw Cap Vials .................................................................................92-96 Screw Caps, ABC .................................................................................... 94 Shell Vials............................................................................................... 87 Snap Caps, 11 mm ................................................................................. 89 Snap Plug Caps ...................................................................................... 87 Snap Ring Vial, Plastic ............................................................................. 93 Snap Ring/Crimp Top Vial ........................................................................ 89 Staining Jar ............................................................................................ 97 TLC Developing Tank ............................................................................... 97
1.800.225.1437 (U.S. & Canada only) | +1.856.825.1100 | +1.856.825.1368 (F) | www.wheatonsci.com
190
191
)NDEX ¬Alphabetical CHROMATOGRAPHY, continued… TLC Reagent Sprayer .............................................................................. 98 TLC Sample Recovery Tube ..................................................................... 97 Clamps Aluminum..........................................................................................76-79 Standard Taper Clamps ........................................................................... 65 Cleaning Brushes .......................................................................................... 105 Clear-Seal Joints ........................................................................................66-70 Closures (see Caps & Closures) Coliwasa................................................................................................129-130 Columbia Jar ................................................................................................ 136 Content ID Label ............................................................................................... 6 Control Tower .................................................................................................. 56 Coplin Jars ................................................................................................... 137 Crimpers Air Powered............................................................................................ 35 Crimping Station, Crimpmaster ................................................................ 35 E-Z Crimper...................................................................................... 35, 96 Uni-Dose Bottle/Vial .......................................................................... 20, 35 Critically Clean Containers ............................................................................. 134 Cryogenic Ampule ............................................................................................. 1 Cryogenic Vials ......................................................................................140-141 Cryogenic Vial Rack ....................................................................................... 142 Cryule Cryogenic Ampule ................................................................................... 1 C-Tubes.......................................................................................................... 49 Custom Containers ........................................................................................ 133 Customized Services ..............................................................................133-134 Cyanide Distillation Kits...............................................................................67-68 Cyanide Scrubber Distillation Kit ....................................................................... 68 Cylinder Round Bottles .................................................................................... 26
Drum Thieves................................................................................................ 130 Dry Seal Desiccators ....................................................................................... 73 Dura-Grind Tissue Grinder ............................................................................... 44
E E-C Sample Vials....................................................................................151-152 EPA Vial ........................................................................................................ 142 Evaporative Concentrators ............................................................................... 69 E-Z Aluminum Seals ........................................................................................ 89 E-Z Extraction Vial ......................................................................................... 143 E-Z Sampler ................................................................................................. 130 Erlenmeyer Flasks ........................................................................................... 49 Extended Controlled Dropper Tip ...................................................................... 24 Extraction Bottle ................................................................................................ 5 Extraction Thimble ........................................................................................... 69
F Feed Tubing .................................................................................................. 105 Filtration Apparatus, Glass ..........................................................................75-80 Assemblies........................................................................................76-79 Clamps .............................................................................................76-79 Filter Flasks .......................................................................................76-79 Filtration Transfer Funnel ......................................................................... 80 Flask, Filter ............................................................................................. 80 Funnel, Glass.....................................................................................76-80 Transfer Funnel....................................................................................... 80 Vacuum Filter Assemblies, 25 mm ........................................................... 76 Vacuum Filter Assemblies, 47 mm ......................................................77-79 Vacuum Filter Assemblies, 90 mm ........................................................... 80 Flasks Celstirs..............................................................................................51-52 Culture, Suspension ...........................................................................51-52 Erlenmeyer ............................................................................................. 49 Filter .................................................................................................76-80 Filter, Safety Coated ................................................................................ 80 Jacketed ................................................................................................ 52 Magna Flex ............................................................................................ 52 MantaRay ............................................................................................... 51 Microcarrier Spinner ............................................................................... 52 Nephelo Culture ...................................................................................... 49 Shake .................................................................................................... 49 Suspension Culture ............................................................................51-52 Trypsinizing ............................................................................................ 50 Footswitch for Pumps .............................................................................126-127 Freestanding Cryogenic Vials ......................................................................... 140 Freezer Boxes ............................................................................................... 142 French Square Bottle ......................................................................................... 8 Funnel-Top Ampule ........................................................................................... 2 Funnels, Filtration .......................................................................................76-80
D Decappers ........................................................................................... 35-36, 96 Deck Kit.................................................................................................... 58, 62 Desiccant Packs.............................................................................................. 74 Desiccators................................................................................................73-74 Developing Chamber, TLC ................................................................................ 97 Diagnostic Bottles ..............................................................................18, 22, 108 Diazomethane Generator ................................................................................. 68 Dilution Vial................................................................................................... 142 Dishes Micro Weighing, Aluminum ...................................................................... 82 Staining................................................................................................ 136 DISPENSERS ..........................................................................................99-106 Acurex compact 501/502 ..................................................................... 100 Bottle Top ........................................................................................99-100 Calibrex digital 520 ................................................................................. 99 Calibrex digital 521 ............................................................................... 100 Dosys Syringes ..............................................................................103-106 Low Profile Bottle Top ............................................................................ 100 Microdispenser Pipette .......................................................................... 122 Omnispense Plus Pump ........................................................................ 126 Self-Refilling Microdispenser ................................................................. 122 Self-Refilling Syringe ......................................................................103-106 Socorex ...........................................................................................99-106 Step-Pette, 411 .................................................................................... 121 Unispense Pump................................................................................... 127 Dispensing Cannulas ..................................................................................... 105 Disposable Tissue Grinder, Micro ...................................................................... 46 Distillation Column .............................................................................................70-72 Cyanide .............................................................................................67-68 Dosys Syringes ......................................................................................103-106 Double Sidearm Celstir .................................................................................... 51 Dounce Tissue Grinder................................................................................43-44 Dropper Bottles ..............................................................................................23-25 Bottle Caps............................................................................................. 24 Bottle Tips .............................................................................................. 24 Tips ....................................................................................................... 24 Tip for Serum Bottle ................................................................................ 20 Tip Caps................................................................................................. 24 Dropping Bottles ........................................................................................23-25 Drum Opener ................................................................................................ 132 WHEATON
G General Purpose Plastic Bottles ...................................................................26-28 Generators, Arsine........................................................................................... 67 Generator, Diazomethane ................................................................................. 68 Glass Filtration Apparatus ...........................................................................75-80 Glass Sinker ................................................................................................. 128 Grab Sampler I, II and III..........................................................................130-131 Graduated Volumetric Bottle ............................................................................. 10 Grip, Slide ..................................................................................................... 137
H Hazard Communication Label............................................................................. 6 Headspace Vials .............................................................................................. 91 High Recovery Vial..................................................................................143-145 Homogenizer................................................................................................... 47 Hybridization Bottles (Tubes) ............................................................................ 11 Hybridization Bottles Rack ................................................................................ 11
I I-LOC Closures........................................................................................ 42, 108 Imhoff Cones/Rack .......................................................................................... 82
1.800.225.1437 (U.S. & Canada only) | +1.856.825.1100 | +1.856.825.1368 (F) | www.wheatonsci.com
)NDEX ¬Alphabetical Impellers ........................................................................................................ 52 Incubators ...................................................................................................... 64 Injection Needles ........................................................................................... 105 Inserts, Cryule Cap ........................................................................................ 142
Media/Lab Bottles ..................................................................................... 13, 30 Micro Concentrator .......................................................................................... 69 Kits ...................................................................................................70-72 Snyder Column ....................................................................................... 69 Soxhlet ................................................................................................... 69 Micro-Stir Magnetic Stirrers ............................................................................. 53 Microcarrier Spinner Flasks ............................................................................. 52 Micropipettes (see Pipettes) Microtest Manifolds ....................................................................................... 105 Microtiter Plate, 96 Well..............................................................................47-48 Microtiter Plates 96 Well Multi-Tier ................................................................................... 47 ABS Plates ............................................................................................. 47 Multi-Tier Sections .................................................................................. 48 Sealing Mat ............................................................................................ 48 Sealing Strips and Plugs.......................................................................... 48 Solid Clear Cover .................................................................................... 48 Topas COC Plates ................................................................................... 48 Vial Loader ............................................................................................. 48 Vials for Multi-Tier System ....................................................................... 48 Micro Sample Vial ......................................................................................... 148 Micro Tissue Grinder Kit................................................................................... 46 Micro Tissue Grinder with Cap.......................................................................... 46 Mini-Files ..................................................................................................... 153 Mini-Pilot Plant System.................................................................................... 55 Modular Cell Production Roller Apparatus ......................................................... 61 Mounting Media Bottle................................................................................... 137 M-T Vial File ......................................................................................... 149, 153 Multi-Tier Section for Microplates ..................................................................... 48
J Jacketed Double Sidearm Celstir ...................................................................... 52 Jars Coplin Staining ..................................................................................... 137 Staining................................................................................................ 137 Straight Sided, Clear ................................................................................. 9 Wide Mouth, Polypropylene ..................................................................... 28 Wide Mouth, Polystyrene ......................................................................... 28 Wide Mouth, HDPE.................................................................................. 28 Jugs Safety Coated ......................................................................................... 16 Square HDPE .......................................................................................... 26
K Kits Cyanide Distillation.................................................................................. 67 Cyanide Scrubber Distillation ................................................................... 68 Organic & Environmental Chemistry ....................................................67-72 Semi-Micro ............................................................................................ 72 Tissue Grinder ........................................................................................ 46 Microscale.............................................................................................. 70 Joints, Sleeves & Clamps ...................................................................65-66 Kuderna-Danish Concentrators ...................................................................68-69
L Lab 45 Media Bottles .............................................................................. 13, 108 Lab/Media Bottles ................................................................................... 30, 108 Lab Files, Sample Vials ...........................................................................150-151 Label, Content ID............................................................................................... 6 Label, Hazard Communication ............................................................................ 6 Laboratory & Organic Glassware .................................................................65-72 LC Column...................................................................................................... 97 Leak Resistant Bottles ..................................................................................... 29 Limited Volume Inserts (see Chromatography) Liquid Scintillation Vials ..........................................................................146-148 Low Profile Bottle Top Dispensers ................................................................... 100 LYOPHILIZATION 2-Leg Stopper ...................................................................................... 110 3-Leg Stopper ...................................................................................... 110 Aluminum Seals.................................................................................... 109 Ampules............................................................................................... 107 Black Lyophilization Stopper .................................................................. 108 Complete Coat Fluorinated Polymer Stoppers ......................................... 110 Diagnostic Bottles ................................................................................. 108 EPDM Stopper ...................................................................................... 108 Fluorinated Polymer Stoppers ................................................................ 110 Halobutyl/60 Stopper ............................................................................ 108 Igloo Stopper ........................................................................................ 110 I-LOC Closure ....................................................................................... 108 Lab 45 Bottle........................................................................................ 108 Screw Neck Diagnostic Bottles............................................................... 108 Serum Bottles ....................................................................................... 109 Serum Vials .......................................................................................... 109 Thin Flange Stopper .............................................................................. 108 Ultra Pure Premium Stoppers................................................................. 110 Vacule Vial.................................................................................... 110, 154 Lyophilization Process.................................................................................... 107 Lyophilization Stoppers .................................................................................. 110
M Macropipettes (see Pipettes) Magna Flex Microcarrier Spinner Flask ............................................................. 52 Magnetic Stirrers............................................................................................. 53 Manifolds, Microtest ...................................................................................... 105 MantaRay ....................................................................................................... 51
WHEATON
N Needles, Injection .......................................................................................... 105 Nephelo Culture Flasks .................................................................................... 49 NextGen V Vials ......................................................................................144-145 Nozzle .......................................................................................................... 128
O Oil Sample Bottle ............................................................................................ 10 Omni-Vials .................................................................................................... 147 Omnispense Plus Pump................................................................................. 126 Opener, Drum ............................................................................................... 132 Organic & Environmental Chemistry Kit ........................................................70-72 Outer Joints .................................................................................................... 66 Overdrive Cell Culture System .......................................................................... 56 Overhead Stirrer .............................................................................................. 47
P Pasteur Pipettes ............................................................................................ 120 Peristaltic Pumps .......................................................................................... 125 PET (Polyethylene Terephthalate) Liquid Scintillation Vials ......................................................................... 147 Media Bottles ................................................................................... 26, 30 Uni-Dose Vials ........................................................................................ 20 PIPETTES..............................................................................................111-124 Acura electro 925 Micro.................................................................115-116 Acura electro 935 Macro................................................................115-116 Acura electro 955 Multi..................................................................115-116 Acura electro Basic Package ................................................................. 116 Acura electro Battery Pack .................................................................... 116 Acura electro Charging Stand ................................................................ 116 Acura electro Volumetric Modules .......................................................... 116 Acura manual 810 Dilution .................................................................... 114 Acura manual 815 Fixed ....................................................................... 113 Acura manual 825 Micro ................................................................111-112 Acura manual 835 Macro ...............................................................111-112 Acura manual 855 Multi .................................................................111-112 Acura manual Triopack .......................................................................... 113 Acura Positive Displacement Model 841................................................. 121 Acura Self-Refilling Microdispenser ........................................................ 122 Calibra Digital 822 Micro ................................................................117-118 Calibra Digital 832 Macro ...............................................................117-118
1.800.225.1437 (U.S. & Canada only) | +1.856.825.1100 | +1.856.825.1368 (F) | www.wheatonsci.com
192
193
)NDEX ¬Alphabetical Apparatus .........................................................................................58-63 Battery Backup Systems.................................................................... 60, 63 Bottles ................................................................................................... 15 CART (Computer Aided Roller Technology) ................................................ 63 Cost Buster Roller Apparatus ................................................................... 60 Deck Kit ................................................................................................. 58 Mini Roller Apparatus .............................................................................. 58 Modular Cell Production Roller Apparatus ................................................. 61 Production Volume Roller Apparatus ....................................................61-62 Roll-In Incubator ..................................................................................... 64 Rotation Alarm ........................................................................................ 60 Small Bottle Roller Apparatus ................................................................... 58 Rotation Alarm System .................................................................................... 60 Rubber Stoppers (see Caps & Closures)
PIPETTES, continued... Calibra Digital 852 Multi .................................................................117-118 Pasteur Pipettes ................................................................................... 120 Pipette Tips .......................................................................................... 119 Profiller electro 446 .............................................................................. 123 Profiller manual 435-436 ...................................................................... 124 Socorex .........................................................................................111-124 Stepper 411 Repeater ........................................................................... 121 Pipette, Accessories Disposable Pasteur Pipettes .................................................................. 120 Nozzle Filters ........................................................................................ 120 Pasteur Pipette Adapter ......................................................................... 120 Pasteur Pipettes ................................................................................... 120 Pipette Stand ........................................................................................ 120 Reagent Reservoirs ............................................................................... 120 Smartie Caps........................................................................................ 120 Socorex Pipette Work Station ................................................................. 120 Universal Work Station .......................................................................... 120 Work Station 337.................................................................................. 120 Work Station 340.................................................................................. 120 Plier Decapper ................................................................................................ 36 Polypropylene Screw Cap (see Caps & Closures) Potter-Elvehjem Tissue Grinders ..................................................................44-45 Pour Ring ETFE .............................................................................................. 13, 108 Polypropylene ................................................................................. 13, 108 Pre-Scored Ampule ................................................................................... 1, 107 Pre-Weighed Containers ................................................................................ 134 PRODUCT APPLICATIONS ......................................................................155-165 Production Equipment, Cell Culture ....................................................... 55, 59-64 Production Volume Roller Apparatus ............................................................59-63 PUMPS Comparison Chart ................................................................................. 125 Footswitch.....................................................................................126-127 Hose Barb ............................................................................................ 128 Nozzle .................................................................................................. 128 Omnispense Plus .................................................................................. 126 Peristaltic ......................................................................................125-126 Sinker, Glass......................................................................................... 128 Tubing .................................................................................................. 127 Unispense ............................................................................................ 127
R R2P Roller Culture Apparatus ............................................................................ 62 Racks BOD Bottle ............................................................................................... 4 Hybridization........................................................................................... 11 Imhoff Cone............................................................................................ 82 Vial ...................................................................................................... 149 Reagent Bottles, All Glass ................................................................................ 14 Reagent Bottles, Screw Cap ............................................................................. 14 Reagent Sprayers, TLC .................................................................................... 98 Recovery Tube, TLC ......................................................................................... 97 Remote Control ............................................................................................... 53 Repeater Pipette ........................................................................................... 121 Repetitive Syringe ..................................................................................103-106 Replacement Screw Caps AC Round Bottles ...................................................................................... 7 Boston Round Bottles ................................................................................ 8 French Squares ........................................................................................ 9 Liquid Scintillation Vials ......................................................................... 148 Standard Wide Mouth Bottles..................................................................... 9 Straight Sided Jar ................................................................................... 10 Valumetric .............................................................................................. 10 Wide Mouth Packer................................................................................. 11 Media Bottles ......................................................................................... 13 Lab 45 ................................................................................................... 13 Sample Vials ......................................................................................... 152 Reservoir, High Capacity .................................................................................. 15 Resin Identification Code ......................................................................... 22, 187 Robotic Stoppers ............................................................................................... 3 Roll-In Incubator.............................................................................................. 64 Roller Culture Apparatus 88 Position R2P System ........................................................................... 63 WHEATON
S Safe-Grind Tissue Grinders .............................................................................. 44 Safety Caps, Tamper-Evident ............................................................................ 32 Safety Coated Bottles ..............................................................................................15-17 Filter Flasks ............................................................................................ 80 Lab 45 Bottles ........................................................................................ 17 Labeled Bottles ....................................................................................... 17 Media Bottles ......................................................................................... 17 Multi-Purpose Reservoirs ........................................................................ 15 Reservoir, High Capacity .......................................................................... 15 Solution Bottles....................................................................................... 17 Tissue Grinders....................................................................................... 44 Sample Recovery Tube .................................................................................... 97 Sample Vials ..........................................................................................150-154 SAMPLE COLLECTION...........................................................................129-132 Bomb Sampler, Stainless Steel............................................................... 129 Bottle, Sample ...............................................................................131-132 Coliwasa .......................................................................................129-130 E-Z Sampler ......................................................................................... 130 Grab Sampler I, II, and III ................................................................130-131 Scoop, Stainless Steel ........................................................................... 132 Trier Sampler ........................................................................................ 132 SciLutions Customized Services ..........................................................133-134 Custom Containers ............................................................................... 133 Bar Coding ........................................................................................... 133 Critical Cleaning.................................................................................... 134 Surface Treatment................................................................................. 134 Taring .................................................................................................. 134 Scintillation Vials ....................................................................................146-148 Caps .................................................................................................... 148 Vial Racks ............................................................................................ 149 Scoop, Stainless Steel ................................................................................... 132 Screw Caps (see Caps & Closures) Screw Neck Diagnostic Bottle .................................................................. 18, 108 Scrubber ........................................................................................................ 68 Seals (see Caps & Closures) Sealing Mat for Microplate System ................................................................... 48 Self-Refilling Syringes.............................................................................103-106 Semi-Micro Organic Chemistry Kit .................................................................... 72 Septa (see Caps & Closures) Serum Bottles .................................................................................... 19-20, 109 Serum Dropper Tip .......................................................................................... 20 Serum Vials ............................................................................................ 19, 109 Shake Flasks .................................................................................................. 49 Shorty Vials ............................................................................................150-151 Silicone Tubing .............................................................................................. 127 Sinker, Glass ................................................................................................. 128 Slide Cleaning ............................................................................................... 138 Slide Coating ................................................................................................ 138 Slide Grip...................................................................................................... 137 Smartie Caps ................................................................................................ 120 Snap Cap Bottles ............................................................................................ 20 Snap Caps ...................................................................................................... 20 Snapper, Ampule ............................................................................................... 2 Snyder Column ............................................................................................... 69 Socorex Dispensers ..................................................................................99-106 Socorex Pipettes (see Pipettes) Socorex Work Stations ............................................................................120-122
1.800.225.1437 (U.S. & Canada only) | +1.856.825.1100 | +1.856.825.1368 (F) | www.wheatonsci.com
)NDEX ¬Alphabetical Software Biopro PC ............................................................................................... 57 CART ..................................................................................................... 63 Solid Determination ......................................................................................... 82 Soxhlet Extractor ............................................................................................. 69 Spin Vane & Magnetic Stir Bar ....................................................................... 145 Spinner Flasks & Systems...........................................................................51-56 Spray Bottles .................................................................................................. 30 Staining Dishes & Jars............................................................................135-137 STAINING WARE....................................................................................135-138 Alcohol Burner ...................................................................................... 137 Balsam Bottle ....................................................................................... 137 Boerner Micro Test Slide........................................................................ 137 Coplin Jar............................................................................................. 137 Columbia Jar ........................................................................................ 136 Staining Dishes..................................................................................... 136 Stands Dispenser ............................................................................................. 101 Tubing .................................................................................................. 128 Imhoff Cone............................................................................................ 82 Standard Taper Clamps ................................................................................... 65 Standard Wide Mouth Bottle .............................................................................. 9 Step-Pette, 411 ............................................................................................ 121 Sterile PET Bottle ............................................................................................ 26 Stirrer, Overhead ............................................................................................. 47 Stirrers, Magnetic............................................................................................ 53 Stoppers (see Caps & Closures) Straight Sided Jar ............................................................................................. 9 Sub Surface Grab Samplers ....................................................................130-131 Surface Treated Containers ............................................................................ 134 Suspension Culture Flasks ...............................................................................................51-52 Stirrers ................................................................................................... 53 Syringes Dosys............................................................................................103-106 Replacement ........................................................................................ 106 Barrels ................................................................................................. 106 Pistons ................................................................................................. 106 PVC Protection Sleeves ......................................................................... 106
Sample Recovery .................................................................................... 97 Scrubber/Absorber.............................................................................67-68 Tubing Extension ............................................................................................. 101 Feeding ................................................................................................ 105 Silicone ................................................................................................ 127 Support Stand ...................................................................................... 128 Viton .................................................................................................... 128
U Uni-Dose Bottles ............................................................................................. 20 Uni-Dose Vials................................................................................................. 20
V V Vials ...................................................................................................144-145 Vacule Lyophilization Ampule .................................................................. 1-2, 107 Vacuum Desiccators, Dry-Seal ....................................................................73-74 Vacuum Filtration Assemblies......................................................................75-80 Value Added Services (see SciLutions) Valumetric, Graduated Bottle ............................................................................ 10 Vented Cap, 45 mm ........................................................................................ 15 VIALS Autosampler ......................................................................................83-96 Ampules................................................................................................1-2 Cryogenic ......................................................................................140-142 Culture ................................................................................................. 142 Dilution ................................................................................................ 142 E-C Sample Vial .............................................................................151-152 EPA...................................................................................................... 142 E-Z Ex-Traction ..................................................................................... 143 High Recovery ...............................................................................143-145 Lab Files .......................................................................................150-151 Liquid Scintillation ..........................................................................146-148 Micro Sample ....................................................................................... 148 Mini-File ............................................................................................... 153 M-T Vial File ................................................................................. 149, 153 NextGen V Vial ...............................................................................144-145 Omni-Vial ............................................................................................. 147 Racks................................................................................................... 149 Sample .........................................................................................150-154 Sampule............................................................................................... 148 Serum ............................................................................................ 19, 109 Vacule .................................................................................................. 154 Vial File .........................................................................................152-153 V Vial ............................................................................................144-145 Vial Files .......................................................................................... 25, 152-153 Vial Loader for Microplate System .................................................................... 48 Vial Racks..................................................................................................... 149 Vial Selector Guide .....................................................................................83-84 Vial Sizer ...................................................................................................85-86 Vials for Multi-Tier Microplate Systems ............................................................. 48 Viton Tubing .................................................................................................. 127
T Tamper Evident Safety Caps............................................................................. 20 Tapered Tissue Grinder .................................................................................... 45 Taring Containers .......................................................................................... 134 TCLP Extraction Bottles, Caps & Liners ............................................................... 5 TECHNICAL DATA ..................................................................................166-188 Temperature Monitor ....................................................................................... 63 Tenbroeck Tissue Grinder................................................................................. 46 Thieve, Drum ................................................................................................ 130 Tips Dropper.................................................................................................. 24 Tissue Grinders Disposable, Micro ................................................................................... 46 Dounce .............................................................................................43-44 Dura-Grind ............................................................................................. 44 Kit.......................................................................................................... 46 Micro ................................................................................................45-46 Plastic Coated ........................................................................................ 44 Potter-Elvehjem .................................................................................44-45 Safe-Grind.............................................................................................. 44 Stirrer .................................................................................................... 47 Tapered.................................................................................................. 45 Tenbroeck .............................................................................................. 46 TLC Developing Chamber ............................................................................... 97 Sample Recovery Tube ............................................................................ 97 Sprayer, Reagent .................................................................................... 98 Topas COC Plates............................................................................................ 48 Trier Sampler ................................................................................................ 132 Trypsinizing Flasks .......................................................................................... 50 Tubes Culture C-Tube ....................................................................................... 49 Drying .................................................................................................... 67 Hybridization........................................................................................... 11 WHEATON
W Weighing Dishes ............................................................................................. 82 Wheaton Connection ..................................................................................69-72 Wheaton Dry-Seal Desiccator .......................................................................... 73 Wheaton Semi-Micro Kit .................................................................................. 72 Wide Mouth Jars, HDPE................................................................................... 28 Wide Mouth Jars, Polypropylene ...................................................................... 28 Wide Mouth Jars, Polystyrene .......................................................................... 28 Wide Mouth Packer Bottles .............................................................................. 11 Work Stations ........................................................................................120-122
#HEMICAL¬#OMPATIBILITY¬#HART See page 214 for chemical compatibility of containers, cap liners, cap materials, and rubber stoppers.
1.800.225.1437 (U.S. & Canada only) | +1.856.825.1100 | +1.856.825.1368 (F) | www.wheatonsci.com
194
195
)NDEX ÂŹNumeric
100 109933 .............................................. 70 110008 .............................................. 71 110012 .............................................. 72 123753 .............................................. 70 123892 .............................................. 72 125478 .................................. 65, 69, 71 125480 .................................. 65, 71, 72 125482 .............................................. 65 125486 .................................. 65, 69, 72 125488 .............................................. 65 125492 .............................................. 65 125494 .............................................. 65 125496 .............................................. 65 125497 .............................................. 65 125499 .............................................. 65 125500 .............................................. 65 125504 ........................................ 65, 69 139479 ........................................ 66, 70 139506 .............................................. 66 139509 .............................................. 66 139513 .............................................. 66 139626 .............................................. 66 139629 .............................................. 66 139633 .............................................. 66 139656 .............................................. 66 139663 .............................................. 66 161978 .............................................. 71 165996 ........................................ 66, 72 168353 .............................................. 70 168378 .............................................. 71 168388 .............................................. 72 176732 ................................................ 2 176740 ................................................ 2 176759 ................................................ 2 176762 ................................................ 2 176772 ................................................ 2 176776 ................................................ 2 176779 ................................................ 2 176780 ................................................ 2 176782 ................................................ 2 176784 ................................................ 2 176792 ................................................ 2 176796 ................................................ 2 176799 ................................................ 2 177105 ................................................ 2 180020 .............................................. 67 180021 .............................................. 67 180022 .............................................. 67 180023 .............................................. 67 180024 .............................................. 67 180030 .............................................. 67 180034 .............................................. 67
200 208890 ............................................ 137 208923 .............................................. 29 208924 .............................................. 29 208925 .............................................. 29 208926 .............................................. 29 208927 .............................................. 29 208928 .............................................. 29 208929 .............................................. 29 209041 .............................................. 29 209043 .............................................. 29 209044 .............................................. 29 209045 .............................................. 29 209046 .............................................. 29 209047 .............................................. 29 209048 .............................................. 29 209049 .............................................. 29 209050 .............................................. 29 209121 .............................................. 29
WHEATON
209123 .............................................. 29 209124 .............................................. 29 209125 .............................................. 29 209126 .............................................. 29 209127 .............................................. 29 209128 .............................................. 29 209129 .............................................. 29 209130 .............................................. 29 209161 .............................................. 29 209163 .............................................. 29 209164 .............................................. 29 209165 .............................................. 29 209166 .............................................. 29 209167 .............................................. 29 209168 .............................................. 29 209169 .............................................. 29 209170 .............................................. 29 209425 .............................................. 29 209426 .............................................. 29 209427 .............................................. 29 209428 .............................................. 29 209429 .............................................. 29 209545 .............................................. 29 209546 .............................................. 29 209547 .............................................. 29 209548 .............................................. 29 209549 .............................................. 29 209550 .............................................. 29 209625 .............................................. 29 209626 .............................................. 29 209627 .............................................. 29 209628 .............................................. 29 209629 .............................................. 29 209630 .............................................. 29 209665 .............................................. 29 209666 .............................................. 29 209667 .............................................. 29 209668 .............................................. 29 209669 .............................................. 29 209672 .............................................. 27 209673 .............................................. 27 209674 .............................................. 27 209675 .............................................. 27 209676 .............................................. 27 209683 .............................................. 27 209685 .............................................. 27 209686 .............................................. 27 211194 .............................................. 22 211195 .............................................. 22 211199 .............................................. 22 211523 ................................................ 5 211530 ................................................ 5 211533 ................................................ 5 211590 .............................................. 25 211592 .............................................. 25 211602 .............................................. 25 211603 .............................................. 25 211604 .............................................. 25 211605 .............................................. 25 211606 .............................................. 25 211607 .............................................. 25 211618 .............................................. 25 211620 .............................................. 25 211621 .............................................. 25 211622 .............................................. 25 211623 .............................................. 25 211624 .............................................. 25 211625 .............................................. 25 211626 .............................................. 25 211628 .............................................. 25 211630 .............................................. 25 211631 .............................................. 25 211632 .............................................. 25 211633 .............................................. 25
211634 .............................................. 25 211635 .............................................. 25 211636 .............................................. 25 211641 .............................................. 25 215237 .............................................. 14 215239 .............................................. 14 215240 .............................................. 14 215241 .............................................. 14 215243 .............................................. 14 215257 .............................................. 14 215259 .............................................. 14 216017 .............................................. 14 216019 .............................................. 14 216020 .............................................. 14 216021 .............................................. 14 216627 .............................................. 17 216629 .............................................. 17 216631 .............................................. 17 216637 .............................................. 17 216639 .............................................. 17 216641 ...................................... 17, 131 216711 ................................................ 5 216712 ................................................ 5 216731 ................................................ 5 219360 ...................................... 18, 108 219361 ...................................... 18, 108 219362 ...................................... 18, 108 219364 ...................................... 18, 108 219370 ...................................... 18, 108 219371 ...................................... 18, 108 219372 ...................................... 18, 108 219374 ...................................... 18, 108 219415 .............................................. 13 219417 .............................................. 13 219419 .............................................. 13 219420 .............................................. 13 219435 .............................................. 12 219437 .............................................. 12 219439 .............................................. 12 219440 .............................................. 12 219455 .............................................. 17 219457 .............................................. 17 219495 .............................................. 13 219497 .............................................. 13 219499 .............................................. 13 219500 .............................................. 13 219575 .............................................. 13 219577 .............................................. 13 219579 .............................................. 13 219580 .............................................. 13 219715 .............................................. 12 219717 .............................................. 12 219719 .............................................. 12 219720 .............................................. 12 219755 .............................................. 12 219757 .............................................. 12 219759 .............................................. 12 219760 .............................................. 12 219815 .............................................. 12 219817 .............................................. 12 219819 .............................................. 12 219820 .............................................. 12 219845 .............................................. 12 219855 .............................................. 12 219865 .............................................. 12 219875 .............................................. 12 219885 .............................................. 13 219915 ...................................... 13, 108 219917 .............................................. 13 219919 .............................................. 13 219920 .............................................. 13 219921 .............................................. 13 219925 .............................................. 13 219927 .............................................. 13
219929 .............................................. 13 219930 .............................................. 13 219931 .............................................. 13 219935 .............................................. 17 219939 .............................................. 17 219940 .............................................. 17 219955 .............................................. 26 219975 .............................................. 30 219979 .............................................. 30 220163 .............................................. 14 220223 .............................................. 14 220283 .............................................. 14 220724 .............................................. 16 220725 .............................................. 16 220726 .............................................. 16 220728 .............................................. 16 220735 .............................................. 16 220736 .............................................. 16 220738 .............................................. 16 220745 .............................................. 16 220746 .............................................. 16 220755 .............................................. 16 220756 .............................................. 16 220775 .............................................. 16 220776 .............................................. 16 220924 .............................................. 16 220925 .............................................. 16 220926 .............................................. 16 220929 .............................................. 16 220935 .............................................. 16 220936 .............................................. 16 220939 .............................................. 16 220945 .............................................. 16 220946 .............................................. 16 220949 .............................................. 16 220955 .............................................. 16 220956 .............................................. 16 220959 .............................................. 16 220975 .............................................. 16 220976 .............................................. 16 220979 .............................................. 16 221014 .............................................. 17 221017 .............................................. 17 221029 .............................................. 17 221131 .............................................. 26 221133 .............................................. 26 221135 .............................................. 26 221140 .............................................. 26 221142 .............................................. 26 221143 .............................................. 26 221144 .............................................. 26 221145 .............................................. 26 221153 .............................................. 26 221154 .............................................. 26 221155 .............................................. 26 221159 .............................................. 26 221163 .............................................. 26 221164 .............................................. 26 221165 .............................................. 26 222333 .............................................. 26 223682 .............................................. 89 223682-01......................................... 89 223683 ...................................... 19, 109 223684 ...................................... 19, 109 223685 ...................................... 19, 109 223686 ...................................... 19, 109 223687 ...................................... 19, 109 223692 .............................................. 89 223692-01......................................... 89 223693 ...................................... 19, 109 223695 ...................................... 19, 109 223696 ...................................... 19, 109 223712 ...................................... 19, 109 223738 ...................................... 19, 109
1.800.225.1437 (U.S. & Canada only) | +1.856.825.1100 | +1.856.825.1368 (F) | www.wheatonsci.com
)NDEX ÂŹNumeric 223739 ...................................... 19, 109 223742 ...................................... 19, 109 223743 ...................................... 19, 109 223745 ...................................... 19, 109 223746 ...................................... 19, 109 223747 ...................................... 19, 109 223748 ...................................... 19, 109 223760 ...................................... 19, 109 223761 ...................................... 19, 109 223762 ...................................... 19, 109 223763 ...................................... 19, 109 223764 ...................................... 19, 109 223766 ...................................... 19, 109 223950 .............................................. 19 223952 .............................................. 19 224007 .............................................. 19 224031 .............................................. 20 224033 .............................................. 20 224036 .............................................. 20 224037 .............................................. 20 224080 .............................................. 20 224100-020....................................... 34 224100-030....................................... 34 224100-060....................................... 34 224100-070....................................... 34 224100-072....................................... 34 224100-080............................... 34, 110 224100-080..................................... 154 224100-081....................................... 34 224100-092............................... 34, 110 224100-093............................... 34, 110 224100-093..................................... 154 224100-160....................................... 34 224100-161....................................... 34 224100-170....................................... 34 224100-171....................................... 34 224100-172............................... 34, 110 224100-172..................................... 154 224100-173....................................... 34 224100-174....................................... 34 224100-175....................................... 34 224100-177....................................... 34 224100-178....................................... 34 224100-180....................................... 34 224100-181................................. 34, 91 224100-192............................... 34, 110 224100-194............................... 34, 110 224100-194..................................... 154 224100-202............................... 34, 110 224100-202..................................... 154 224100-203................................. 18, 34 224100-203............................... 42, 108 224100-203..................................... 110 224100-263....................................... 34 224100-282............................... 34, 110 224100-320....................................... 34 224100-330....................................... 34 224100-331....................................... 34 224100-342....................................... 34 224100-503................................. 13, 15 224100-503................................. 34, 41 224100-503............................. 108, 110 224100-507................................. 13, 34 224100-507............................... 41, 108 224100-507..................................... 110 224162 .............................................. 33 224163 .............................................. 33 224168 ........................................ 33, 91 224172 .............................................. 33 224173 ........................................ 33, 91 224174 .............................................. 33 224175-01................................. 32, 109 224175-05................................. 32, 109 224175-06................................. 32, 109
WHEATON
224175-07................................. 32, 109 224176-01................................. 32, 109 224176-05................................. 32, 109 224176-06................................. 32, 109 224176-07................................. 32, 109 224177-01................................. 32, 109 224177-05................................. 32, 109 224177-06................................. 32, 109 224178-01................................... 32, 91 224178-01....................................... 109 224178-05................................. 32, 109 224178-06................................. 32, 109 224178-07................................. 32, 109 224182-01................................. 32, 109 224182-05................................. 32, 109 224182-06................................. 32, 109 224182-07................................. 32, 109 224183-01................................... 32, 91 224183-01....................................... 109 224183-05................................. 32, 109 224183-06................................. 32, 109 224183-07................................. 32, 109 224187-01......................................... 32 224189 ...................................... 32, 109 224191 ...................................... 32, 109 224192-01................................. 32, 109 224192-05................................. 32, 109 224192-06................................. 32, 109 224192-07................................. 32, 109 224193-01................................. 32, 109 224193-05................................. 32, 109 224193-06................................. 32, 109 224193-07................................. 32, 109 224195 ........................................ 20, 32 224196 ........................................ 20, 32 224197-01......................................... 32 224202 .............................................. 33 224203 .............................................. 33 224208 .............................................. 33 224209-01......................................... 32 224211-01................................... 32, 89 224211-05................................... 32, 89 224211-06................................... 32, 89 224211-07................................... 32, 89 224218-01......................................... 32 224219-01................................... 32, 89 224219-05................................... 32, 89 224219-06................................... 32, 89 224219-07................................... 32, 89 224222-01......................................... 32 224223-01......................................... 32 224231-01................................... 32, 89 224231-05................................... 32, 89 224231-06................................... 32, 89 224231-07................................... 32, 89 224234-01......................................... 32 224235-01................................... 32, 89 224307 .............................................. 35 224316 ........................................ 20, 35 224321 .............................................. 35 224322 .............................................. 35 224323 .............................................. 35 224357 .............................................. 35 224372 .............................................. 36 224373 .............................................. 36 224381 .............................................. 35 224382 .............................................. 35 224383 .............................................. 35 224465 .............................................. 35 224550 .............................................. 35 224626 .............................................. 96 224627 .............................................. 96 224628 .............................................. 96 224629 .............................................. 96
224700 ............................................ 152 224701 ............................................ 152 224702 ............................................ 152 224704 ............................................ 152 224705 ............................................ 152 224706 ............................................ 152 224708 ............................................ 152 224710 ............................................ 152 224711 ............................................ 152 224712 ............................................ 152 224714 ............................................ 152 224720 ............................................ 151 224721 ............................................ 151 224722 ............................................ 151 224724 ............................................ 151 224725 ............................................ 151 224726 ............................................ 151 224728 ............................................ 151 224730 ............................................ 151 224731 ............................................ 151 224732 ............................................ 151 224734 ............................................ 151 224740 ............................................ 151 224741 ............................................ 151 224742 ............................................ 151 224744 ............................................ 151 224745 ............................................ 151 224746 ............................................ 151 224748 ............................................ 151 224750 ............................................ 151 224751 ............................................ 151 224752 ............................................ 151 224754 ............................................ 151 224794 .............................................. 96 224794-01......................................... 96 224795 .............................................. 96 224795-01......................................... 96 224801 ............................................ 151 224802 ............................................ 151 224804 ............................................ 151 224805 ............................................ 151 224806 ............................................ 151 224808 ............................................ 151 224811 ............................................ 151 224812 ............................................ 151 224814 ............................................ 151 224821 ............................................ 151 224822 ............................................ 151 224823 ............................................ 151 224831 ............................................ 151 224832 ............................................ 151 224833 ............................................ 151 224836 ............................................ 151 224841 ............................................ 153 224842 ............................................ 153 224881 ............................................ 150 224882 ............................................ 150 224884 ............................................ 150 224885 ............................................ 150 224886 ............................................ 150 224888 ............................................ 150 224891 ............................................ 152 224892 ............................................ 152 224950 ...................................... 95, 153 224952 ...................................... 71, 153 224961 ............................................ 153 224962 ............................................ 153 224981 ............................................ 150 224982 ............................................ 150 224984 ............................................ 150 225002 ............................................ 142 225012 ............................................ 150
196
225014 ............................................ 150 225081 ............................................ 148 225120 .............................................. 87 225121 .............................................. 87 225124 .............................................. 87 225126 .............................................. 87 225127 .............................................. 87 225129 .............................................. 87 225130 .............................................. 87 225142 ............................................ 142 225144 ............................................ 142 225145 ............................................ 142 225170 .............................................. 95 225172 .............................................. 88 225173 .............................................. 88 225174 .............................................. 88 225175 .............................................. 88 225179 .............................................. 89 225179-01......................................... 89 225179-02......................................... 89 225179-03......................................... 89 225180 .............................................. 93 225185 .............................................. 93 225190 .............................................. 93 225195 .............................................. 93 225200 .............................................. 93 225205 .............................................. 93 225220-01......................................... 92 225221-01......................................... 92 225235 .............................................. 93 225241 .............................................. 87 225242 .............................................. 87 225255 .................................. 88, 89, 94 225256 .............................................. 87 225257 .................................. 88, 89, 94 225258 .............................................. 96 225259 .............................................. 96 225260 ........................................ 89, 95 225261 .............................................. 89 225265 .................................. 88, 89, 94 225268 .............................................. 96 225277 .............................................. 91 225278 .............................................. 91 225280 .............................................. 91 225288 ............................................ 150 225289 ............................................ 150 225290 ............................................ 150 225310 ............................................ 142 225315 ............................................ 142 225326 .............................................. 92 225328 .............................................. 92 225350-531................................. 89, 95 225350-631................................. 88, 89 225350-631....................................... 94 225402 ............................................ 147 225414 ............................................ 148 225415 ............................................ 148 225532 .............................................. 20 225534 .............................................. 20 225535 .............................................. 20 225536 .............................................. 20 225538 .............................................. 20 225539 .............................................. 20 225540 .............................................. 20 225541 .............................................. 20 225543 .............................................. 20
1.800.225.1437 (U.S. & Canada only) | +1.856.825.1100 | +1.856.825.1368 (F) | www.wheatonsci.com
197
)NDEX ÂŹNumeric 225544 .............................................. 20 225546 .............................................. 20 226432 .............................................. 30 226433 .............................................. 30 226434 .............................................. 30 226436 .............................................. 30 226732 .............................................. 20 226733 .............................................. 20 226734 .............................................. 20 226772 .............................................. 20 226773 .............................................. 20 227494-00........................................... 3 227494-00G ........................................ 3 227494-01........................................... 3 227494-01G ........................................ 3 227494-02........................................... 3 227494-02G ........................................ 3 227494-03........................................... 3 227494-03G ........................................ 3 227494-99........................................... 3 227494-99G ........................................ 3 227497-00........................................... 3 227497-00G ........................................ 3 227497-01........................................... 3 227497-01G ........................................ 3 227497-02........................................... 3 227497-02G ........................................ 3 227497-03........................................... 3 227497-03G ........................................ 3 227497-04........................................... 3 227497-04G ........................................ 3 227497-05........................................... 3 227497-05G ........................................ 3 227497-06........................................... 3 227497-06G ........................................ 3 227497-07........................................... 3 227497-07G ........................................ 3 227497-08........................................... 3 227497-08G ........................................ 3 227497-09........................................... 3 227497-09G ........................................ 3 227497-10........................................... 3 227497-10G ........................................ 3 227497-11........................................... 3 227497-11G ........................................ 3 227497-12........................................... 3 227497-12G ........................................ 3 227497-13........................................... 3 227497-13G ........................................ 3 227497-14........................................... 3 227497-14G ........................................ 3 227497-15........................................... 3 227497-15G ........................................ 3 227497-16........................................... 3 227497-16G ........................................ 3 227497-17........................................... 3 227497-17G ........................................ 3 227497-18........................................... 3 227497-18G ........................................ 3 227497-99........................................... 3 227497-99G ........................................ 3 227498 ................................................ 3 227580 ................................................ 4 227667 ................................................ 4 227670 ................................................ 3 227672 ................................................ 3 227700 ................................................ 4 227723 ................................................ 4 227728 ................................................ 4 227730 ................................................ 4 227735 ................................................ 4 228710 ............................................ 153 228778 .................................... 149, 153 228780 .................................... 149, 153
WHEATON
228783 .................................... 149, 153 228785 .................................... 149, 153 235239 .............................................. 14 237070 ............................................ 137 237071 ............................................ 137 237072 ............................................ 137 239201 .............................................. 40 239202 .............................................. 40 239203 .............................................. 40 239205 ...................................... 8, 9, 40 239207 .......................................... 8, 40 239209 ...................................... 8, 9, 40 239211 ................................ 8, 9, 11, 40 239212 ........................................ 7, 8, 9 239212 .................................. 10, 11, 40 239213 .............................. 7, 10, 11, 40 239214 .......................................... 9, 40 239215 ........................................ 11, 40 239216 ................................ 7, 9, 10, 40 239217 .................................. 10, 11, 40 239218 ................................ 7, 9, 10, 40 239219 .......................................... 9, 40 239220 .................................... 7, 10, 40 239221 .......................................... 9, 40 239222 .................................... 9, 10, 40 239225 .............................................. 40 239226 .............................................. 40 239227 .............................................. 40 239229 ...................................... 8, 9, 40 239231 .......................................... 8, 40 239233 ...................................... 8, 9, 40 239235 ................................ 8, 9, 11, 40 239236 ........................................ 7, 8, 9 239236 .................................. 10, 11, 40 239237 .............................. 7, 10, 11, 40 239238 .......................................... 9, 40 239239 ........................................ 11, 40 239240 ................................ 7, 9, 10, 40 239241 .................................. 10, 11, 40 239242 ................................ 7, 9, 10, 40 239243 .......................................... 9, 40 239244 .......................................... 7, 10 239244 ...................................... 40, 131 239245 .......................................... 9, 40 239246 .................................... 9, 10, 40 239249 .............................................. 37 239250 .............................................. 37 239251 .............................................. 37 239253 ...................................... 8, 9, 37 239255 .......................................... 8, 37 239257 ...................................... 8, 9, 37 239259 ................................ 8, 9, 11, 37 239260 ...................................... 8, 9, 10 239260 ....................................... 11, 37 239273 .............................................. 40 239274 .............................................. 40 239275 .............................................. 40 239277 .............................................. 40 239279 .............................................. 40 239281 .............................................. 40 239283 .............................................. 40 239284 .............................................. 40 239285 .............................................. 40 239286 .............................................. 40 239287 .............................................. 40 239288 .............................................. 40 239289 .............................................. 40 239290 .............................................. 40 239291 .............................................. 40 239292 .............................................. 40 239293 .............................................. 40 239294 .............................................. 40 239401 .............................................. 40 239402 .............................................. 40
239403 .............................................. 40 239407 .............................................. 40 239409 .............................................. 40 239412 .............................................. 40 239413 .............................................. 40 239414 .............................................. 40 239415 .............................................. 40 239416 .............................................. 40 239417 .............................................. 40 239418 .............................................. 40 239420 .............................................. 40 239421 .............................................. 40 239422 .............................................. 40 239425 .............................................. 40 239426 .............................................. 40 239427 .............................................. 40 239429 .............................................. 40 239431 .............................................. 40 239433 .............................................. 40 239435 .............................................. 40 239437 .............................................. 40 239438 .............................................. 40 239439 .............................................. 40 239440 .............................................. 40 239442 .............................................. 40 239443 .............................................. 40 239444 .............................................. 40 239445 .............................................. 40 239446 .............................................. 40 239449 .............................................. 37 239450 .............................................. 37 239451 .............................................. 37 239453 .............................................. 37 239455 .............................................. 37 239459 .............................................. 37 239460 .............................................. 37 239473 .............................................. 40 239474 .............................................. 40 239475 .............................................. 40 239477 .............................................. 40 239479 .............................................. 40 239481 .............................................. 40 239483 .............................................. 40 239484 .............................................. 40 239485 .............................................. 40 239486 .............................................. 40 239490 .............................................. 40 239491 .............................................. 40 239492 .............................................. 40 239493 .............................................. 40 239494 .............................................. 40 239501 .............................................. 42 239501-02......................................... 42 239501-03......................................... 42 239501-04......................................... 42 239501-06......................................... 42 239506 .............................................. 42 239506-02......................................... 42 239506-03......................................... 42 239506-04......................................... 42 239506-06......................................... 42 239510 .............................................. 42 239510-02......................................... 42 239510-03......................................... 42 239510-04......................................... 42 239510-06......................................... 42 239512 .............................................. 42 239512-02......................................... 42 239512-03......................................... 42 239512-04......................................... 42 239512-06......................................... 42 239516 .............................................. 42 239516-02......................................... 42 239516-03......................................... 42
239516-04......................................... 42 239516-06......................................... 42 239853 ..................................... 38, 110 239853 ............................................ 154 240080 .................................. 13, 17, 37 240081 ........................................ 13, 37 240106 .............................................. 39 240112 .............................................. 39 240114 .............................................. 39 240119 .............................................. 37 240121 .............................................. 37 240181 .............................................. 37 240202 ................................................ 5 240203 ................................................ 5 240204 ................................................ 5 240206 ...................................... 37, 152 240208 ...................................... 37, 152 240209 ...................................... 37, 110 240209 .................................... 152, 154 240215 ...................................... 37, 152 240216 ...................................... 37, 152 240218 ...................................... 37, 152 240223 .............................................. 37 240228 .............................................. 37 240230 .............................................. 39 240230-01......................................... 39 240231-01......................................... 39 240232 .............................................. 39 240232-01......................................... 39 240234-01......................................... 39 240235 .............................................. 39 240235-01......................................... 39 240240-01......................................... 39 240241 .............................................. 39 240241-01......................................... 39 240242 .............................................. 39 240242-01......................................... 39 240243 .............................................. 39 240243-01......................................... 39 240250 .............................................. 39 240250-01......................................... 39 240251 .............................................. 39 240251-01......................................... 39 240252 .............................................. 39 240252-01......................................... 39 240255-01......................................... 39 240256 .............................................. 39 240256-01......................................... 39 240264 .............................................. 37 240269 .............................................. 37 240278 .............................................. 37 240280 .................................. 13, 17, 37 240281 ........................................ 13, 37 240319 .............................................. 37 240321 .............................................. 37 240330 .............................................. 37 240381 .............................................. 37 240408 ...................................... 37, 152 240409 ...................................... 37, 152 240414 ...................................... 37, 152 240415 ...................................... 37, 152 240416 ...................................... 37, 152 240418 ........................................ 37, 41 240418 .................................... 143, 152 240419 .............................................. 37 240421 .............................................. 37 240463 .............................................. 37 240480 ........................................ 13, 17 240480 ...................................... 37, 130 240481 ........................................ 13, 37 240481 .................................... 130, 131 240555 ................................................ 5 240557 ................................................ 5 240563 .............................................. 38
1.800.225.1437 (U.S. & Canada only) | +1.856.825.1100 | +1.856.825.1368 (F) | www.wheatonsci.com
)NDEX ÂŹNumeric 240602 .............................................. 95 240676-01................................... 18, 42 240676-01....................................... 108 240676-02................................... 18, 42 240676-02...................................... 108 240676-03................................... 18, 42 240676-03...................................... 108 240676-04................................... 18, 42 240676-04...................................... 108 240676-05................................... 18, 42 240676-05....................................... 108 240680 ........................................ 13, 38 240683 ........................................ 13, 38 240706-01................................... 18, 42 240706-01....................................... 108 240706-02................................... 18, 42 240706-02....................................... 108 240706-03................................... 18, 42 240706-03....................................... 108 240706-04................................... 18, 42 240706-04....................................... 108 240706-05................................... 18, 42 240706-05...................................... 108 240716-01.................................. 18 , 42 240716-01...................................... 108 240716-02................................... 18, 42 240716-02....................................... 108 240716-03................................... 18, 42 240716-03....................................... 108 240716-04................................... 18, 42 240716-04....................................... 108 240716-05................................... 18, 42 240716-05....................................... 108 240726 .................................. 13, 17, 41 240726-03................................... 13, 17 240726-03........................................ 41 240726-04................................... 13, 17 240726-04......................................... 41 240736 ....................................... 13, 15, 240736 ...................................... 41, 108 240740 .................................. 13, 15, 41 240746 ................................ 13, 41, 108 240750 ........................................ 13, 41 240754 .............................................. 79 240755 .............................................. 79 240756 ................................ 13, 41, 108 240760 ................................ 13, 41, 108 240776 .............................................. 79 240780 .............................................. 79 240804 ...................................... 38, 148 240805 ...................................... 38, 148 240817 ...................................... 38, 148 240818 ...................................... 38, 148 240917 ...................................... 38, 148 241009 ...................................... 38, 148 241017 ...................................... 38, 148 241018 ...................................... 38, 148 241317 ...................................... 38, 148 242210 .............................................. 40 242212 .............................................. 40 242214 .............................................. 40 242216 .............................................. 40 242217 .............................................. 40 242218 .............................................. 40 242220 .............................................. 40 242222 .............................................. 40 242224 .............................................. 40 242225 .............................................. 40 242226 .............................................. 40 242228 .............................................. 40 242245 .............................................. 95 242247 .............................................. 96 242401 .............................................. 24 242401-01......................................... 24
WHEATON
242402 .............................................. 24 242403 .............................................. 24 242404 .............................................. 24 242405 .............................................. 24 242406 .............................................. 24 242407 .............................................. 24 242408 .............................................. 24 242410 .............................................. 24 242411 .............................................. 24 242411-01......................................... 24 242412 .............................................. 24 242413 .............................................. 24 242414 .............................................. 24 242415 .............................................. 24 242416 .............................................. 24 242417 .............................................. 24 242418 .............................................. 24 242420 .............................................. 24 242421 .............................................. 24 242421-01......................................... 24 242422 .............................................. 24 242423 .............................................. 24 242424 .............................................. 24 242425 .............................................. 24 242426 .............................................. 24 242427 .............................................. 24 242428 .............................................. 24 242430 .............................................. 24 242431 .............................................. 24 242431-01......................................... 24 242432 .............................................. 24 242433 .............................................. 24 242434 .............................................. 24 242435 .............................................. 24 242436 .............................................. 24 242437 .............................................. 24 242438 .............................................. 24 242440 .............................................. 24 242501 .............................................. 24 242501-01......................................... 24 242502 .............................................. 24 242503 .............................................. 24 242504 .............................................. 24 242505 .............................................. 24 242506 .............................................. 24 242507 .............................................. 24 242508 .............................................. 24 242509 .............................................. 24 242510 .............................................. 24 242511 .............................................. 24 242511-01......................................... 24 242512 .............................................. 24 242513 .............................................. 24 242514 .............................................. 24 242515 .............................................. 24 242516 .............................................. 24 242517 .............................................. 24 242518 .............................................. 24 242519 .............................................. 24 242520 .............................................. 24 242521 .............................................. 24 242521-01......................................... 24 242522 .............................................. 24 242523 .............................................. 24 242524 .............................................. 24 242525 .............................................. 24 242526 .............................................. 24 242527 .............................................. 24 242528 .............................................. 24 242530 .............................................. 24 242531 .............................................. 24 242531-01......................................... 24 242532 .............................................. 24 242533 .............................................. 24
242534 .............................................. 24 242535 .............................................. 24 242536 .............................................. 24 242537 .............................................. 24 242538 .............................................. 24 242540 .............................................. 24 242564 ............................................ 141 242566 ............................................ 141 242582 ............................................ 142 242584 ............................................ 142 242586 ............................................ 142 242588 ............................................ 142 242590 ............................................ 142 242592 ............................................ 142 242612 ........................................ 20, 42 242615 ........................................ 20, 42 242616 ........................................ 20, 42 242619 ........................................ 20, 42 242760 .............................................. 96 242761 .............................................. 96 242762 .............................................. 96 242765 .............................................. 96 242766 .............................................. 96 242768 .............................................. 96 242772 .............................................. 90 242772-01......................................... 90 242772-02......................................... 90 242772-04......................................... 90 242772-05......................................... 90 242772-06......................................... 90 242775 .............................................. 90 242776 .............................................. 90 242776-01......................................... 90 242776-02......................................... 90 242776-04......................................... 90 242776-05......................................... 90 242782 .............................................. 90 242786 .............................................. 90 242786-01......................................... 90 242786-02......................................... 90 242786-04......................................... 90 242786-05......................................... 90 242800 .............................................. 87 242802 .............................................. 87 242804 .............................................. 87 242806 .............................................. 87 242808 .............................................. 87 242810 .............................................. 87 242815 .............................................. 87 264710 .............................................. 15 264711 .............................................. 15 265318 ........................................ 71, 97 265320 ........................................ 71, 97 265422 .............................................. 80 276840 ...................................... 97, 137 276845 .............................................. 97 276850 .............................................. 97 276860 .............................................. 97 277930 .............................................. 97 277935 .............................................. 97 279040 .............................................. 98 279041 .............................................. 98 279045 .............................................. 98 279050 .............................................. 98 281135 .............................................. 68 281155 .............................................. 68 281158 .............................................. 68 293475 .............................................. 40 297746 ........................................ 65, 67 297749 ........................................ 65, 68 297752 ........................................ 65, 67 297755 .............................................. 65
198
297757 .............................................. 65 297770 .............................................. 69 297771 .............................................. 69 297773 .............................................. 69 297784-12......................................... 67 297800 ........................................ 68, 69 297810 .............................................. 69 297811 .............................................. 69 297814 .............................................. 69 297815 .............................................. 69 297816 .............................................. 69 297825 .............................................. 69 297883 .............................................. 69 297942 .............................................. 68
300 327342 .............................................. 70 333927 .............................................. 71 333952 .............................................. 72 334003 .............................................. 69 334014 .............................................. 69 334025 .............................................. 69 348252 .............................................. 15 348253 .............................................. 15 348256 .............................................. 15 348258 .............................................. 15 348272 .............................................. 15 348273 .............................................. 15 348522 .............................................. 15 348524 .............................................. 15 348528 .............................................. 15 348960-A .......................................... 61 348960-B .......................................... 61 348961-A .......................................... 61 348961-B .......................................... 61 348962-A .......................................... 61 348962-B .......................................... 61 348963-A .......................................... 61 348963-B .......................................... 61 348964-A .......................................... 61 348964-B .......................................... 61 348965-A .......................................... 61 348965-B .......................................... 61 348966-A .......................................... 61 348966-B .......................................... 61 348967-A .......................................... 61 348967-B .......................................... 61 348968-A .......................................... 61 348968-B .......................................... 61 348969 .............................................. 61 348970-C .......................................... 61 348970-D .......................................... 61 348970-F ........................................... 61 348970-G .......................................... 61 348971-C .......................................... 61 348971-D .......................................... 61 348971-F ........................................... 61 348971-G .......................................... 61 348972-C .......................................... 61 348972-D .......................................... 61 348972-F ........................................... 61 348972-G .......................................... 61 348973-C .......................................... 61 348973-D .......................................... 61 348973-F ........................................... 61
1.800.225.1437 (U.S. & Canada only) | +1.856.825.1100 | +1.856.825.1368 (F) | www.wheatonsci.com
199
)NDEX ÂŹNumeric 348973-G .......................................... 61 348974-C .......................................... 61 348974-D .......................................... 61 348974-F ........................................... 61 348974-G .......................................... 61 348975-C .......................................... 61 348975-D .......................................... 61 348975-F ........................................... 61 348975-G .......................................... 61 348976-C .......................................... 61 348976-D .......................................... 61 348976-F ........................................... 61 348976-G .......................................... 61 348977-C .......................................... 61 348977-D .......................................... 61 348977-F ........................................... 61 348977-G .......................................... 61 348978-C .......................................... 61 348978-D .......................................... 61 348978-F ........................................... 61 348978-G .......................................... 61 348990-A .......................................... 60 348990-B .......................................... 60 348995-C .......................................... 60 348995-D .......................................... 60 348995-F ........................................... 60 348995-G .......................................... 60 349000-A .......................................... 60 349000-B .......................................... 60 349005-C .......................................... 60 349005-D .......................................... 60 349005-F ........................................... 60 349005-G .......................................... 60 349011 .............................................. 60 349013 .............................................. 60 349014 .............................................. 60 349016 .............................................. 60 349017 .............................................. 60 349018 .............................................. 60 351054 .............................................. 49 351454 .............................................. 49 351456 .............................................. 49 351486 .............................................. 49 351514 .............................................. 49 351516 .............................................. 49 353255 .............................................. 49 353257 .............................................. 49 353259 .............................................. 49 353262 .............................................. 49 353264 .............................................. 49 353266 .............................................. 49 354235 .............................................. 49 354237 .............................................. 49 354239 .............................................. 49 354242 .............................................. 49 354244 .............................................. 49 355392 .............................................. 50 355393 .............................................. 50 355394 .............................................. 50 355395 .............................................. 50 355397 .............................................. 50 355398 .............................................. 50 355442 .............................................. 50 355443 .............................................. 50 355444 .............................................. 50 355445 .............................................. 50 355447 .............................................. 50 355448 .............................................. 50 355752 .............................................. 50 355753 .............................................. 50 355754 .............................................. 50 355755 .............................................. 50 355757 .............................................. 50 355758 .............................................. 50
WHEATON
355802 .............................................. 50 355803 .............................................. 50 355804 .............................................. 50 355805 .............................................. 50 355807 .............................................. 50 355808 .............................................. 50 356420-A .......................................... 56 356420-B .......................................... 56 356422-A .......................................... 56 356422-B .......................................... 56 356424-A .......................................... 56 356424-B .......................................... 56 356426-C .......................................... 56 356426-D .......................................... 56 356426-F ........................................... 56 356426-G .......................................... 56 356428-C .......................................... 56 356428-D .......................................... 56 356428-F ........................................... 56 356428-G .......................................... 56 356430-C .......................................... 56 356430-D .......................................... 56 356430-F ........................................... 56 356430-G .......................................... 56 356433 .............................................. 56 356471 .............................................. 56 356830 .............................................. 52 356831 .............................................. 52 356832 .............................................. 52 356834 .............................................. 52 356837 .............................................. 52 356839 .............................................. 52 356841 .............................................. 52 356842 .............................................. 52 356843 .............................................. 52 356844 .............................................. 52 356847 .............................................. 52 356848 .............................................. 52 356849 .............................................. 52 356873 .............................................. 51 356874 .............................................. 52 356875 .............................................. 51 356876 .............................................. 51 356877 .............................................. 52 356878 .............................................. 52 356879 .............................................. 51 356880 .............................................. 52 356882 .............................................. 51 356883 .............................................. 52 356884 .............................................. 51 356885 .............................................. 52 356886 .............................................. 52 356887 .............................................. 51 356888 .............................................. 52 356889 .............................................. 51 356890 .............................................. 51 356891 .............................................. 52 356893 .............................................. 52 356895 .............................................. 52 356896 .............................................. 52 356899 .............................................. 52 356902 .............................................. 52 356904 .............................................. 52 356907 .............................................. 52 356909 .............................................. 52 356910 .............................................. 52 356913 .............................................. 52 356915 .............................................. 52 356916 .............................................. 52 356919 .............................................. 52 356922 ........................................ 52, 54 356924 .............................................. 52 356927 .............................................. 52 356929 .............................................. 52
356930 .............................................. 52 356943 .............................................. 52 356945 .............................................. 52 356946 .............................................. 52 356949 .............................................. 52 356952 .............................................. 52 356954 .............................................. 52 356963 .............................................. 52 356965 .............................................. 52 356966 .............................................. 52 356969 .............................................. 52 356972 .............................................. 52 356974 .............................................. 52 357331 ...................................... 67, 120 357335 ............................................ 120 357421 .............................................. 46 357422 .............................................. 46 357424 .............................................. 46 357426 .............................................. 46 357428 .............................................. 46 357535 .............................................. 46 357536 .............................................. 46 357537 .............................................. 46 357538 ........................................ 43, 46 357542 .............................................. 43 357544 .............................................. 43 357546 .............................................. 43 357572 .............................................. 44 357574 .............................................. 44 357576 .............................................. 44 357841 .............................................. 45 357843 .............................................. 45 357844 ........................................ 45, 46 357848 .............................................. 46 357860 .............................................. 46 357966 .............................................. 45 357969 .............................................. 45 357971 .............................................. 45 357974 .............................................. 45 357976 .............................................. 45 357979 .............................................. 45 357981 .............................................. 45 357984 .............................................. 45 357986 .............................................. 45 357989 .............................................. 45 357991 .............................................. 45 357994 .............................................. 45 358003 .............................................. 44 358004 .............................................. 44 358005 .............................................. 44 358006 .............................................. 44 358007 .............................................. 44 358008 .............................................. 44 358009 .............................................. 44 358010 .............................................. 44 358011 .............................................. 44 358012 .............................................. 44 358013 .............................................. 44 358014 .............................................. 44 358026 .............................................. 44 358028 ........................................ 44, 45 358029 ........................................ 44, 46 358031 .............................................. 44 358033 ........................................ 44, 45 358034 .............................................. 44 358036 .............................................. 44 358038 ........................................ 44, 45 358039 .............................................. 44 358041 .............................................. 44 358043 ........................................ 44, 45 358044 .............................................. 44 358046 .............................................. 44 358048 ........................................ 44, 45 358049 .............................................. 44
358051 .............................................. 44 358053 ........................................ 44, 45 358054 .............................................. 44 358101 .............................................. 45 358102 .............................................. 45 358103 .............................................. 45 358105 .............................................. 45 358106 .............................................. 45 358107 .............................................. 45 358109 .............................................. 45 358110 .............................................. 45 358111 .............................................. 45 358113 .............................................. 45 358114 .............................................. 45 358115 .............................................. 45 358131 .............................................. 45 358132 .............................................. 45 358133 ........................................ 45, 46 358135 .............................................. 45 358136 .............................................. 45 358137 .............................................. 45 358139 .............................................. 45 358140 .............................................. 45 358141 .............................................. 45 358143 .............................................. 45 358144 .............................................. 45 358145 .............................................. 45 358204 .............................................. 46 358606 .............................................. 49 358607 .............................................. 49 358610 .............................................. 49 358646 .............................................. 49 358647 .............................................. 49 358650 .............................................. 49 365822 .............................................. 74 365824 .............................................. 74 365826 .............................................. 74 365882 .............................................. 73 365884 .............................................. 73 365886 .............................................. 73 365892 .............................................. 74 365894 .............................................. 74 365896 .............................................. 74 365904 .............................................. 74 365906 .............................................. 74 365914 .............................................. 74 365916 .............................................. 74 366012 .............................................. 74 366014 .............................................. 74 366016 .............................................. 74 366022 .............................................. 74 366024 .............................................. 74 366026 .............................................. 74 366042 .............................................. 74 366044 .............................................. 74 366046 .............................................. 74 366074 .............................................. 74 366076 .............................................. 74 370790 .............................................. 82 370792 .............................................. 82 374301 ............................................ 127 374302 ............................................ 127 374304 ............................................ 127 374305 ............................................ 127 374306 ............................................ 127 374308 ............................................ 127 374310 ............................................ 127 374311 ............................................ 127 374313 ............................................ 127 374314 ............................................ 127 374315 ............................................ 127 374316 ............................................ 127 374318 ............................................ 127 374319 ............................................ 127
1.800.225.1437 (U.S. & Canada only) | +1.856.825.1100 | +1.856.825.1368 (F) | www.wheatonsci.com
)NDEX ÂŹNumeric 374320 ............................................ 128 374321 ............................................ 128 374322 ............................................ 128 374325 ............................................ 128 374324 ............................................ 128 374326 ............................................ 128 374328 ............................................ 128 374330 ............................................ 128 377160 .............................................. 67 377161 .............................................. 67 377162 .............................................. 67 377163 ........................................ 67, 68 377164 ........................................ 67, 68 377165 ........................................ 67, 68 377166 ........................................ 67, 68 377260 .............................................. 68 384353 .............................................. 69 385772 .............................................. 70 385792 .............................................. 72
400 415000 .............................................. 69 415005 .............................................. 69 415010 .............................................. 69 415500 .............................................. 69 415501 .............................................. 69 415502 .............................................. 69 416000 .............................................. 69 416005 .............................................. 69 416010 .............................................. 69 419325 ........................................ 75, 76 419327 ........................................ 75, 76 419330 .............................................. 76 419331 .............................................. 76 419332 .............................................. 76 419333 .............................................. 76 419334 .............................................. 76 419336 .............................................. 76 419337 .............................................. 76 419338 .............................................. 76 419347 ........................................ 75, 77 419350 .................................. 77, 78, 79 419352 .............................................. 77 419354 .................................. 77, 78, 79 419356 ........................................ 77, 80 419360 ........................................ 75, 77 419362 .............................................. 77 419364 .................................. 77, 78, 79 419366 .................................. 77, 78, 79 419370 ........................................ 75, 77 419372 .............................................. 77 419374 .............................................. 77 419380 ........................................ 75, 78 419382 .............................................. 78 419385-47................................... 75, 78 419390 ........................................ 75, 78 419392 .............................................. 78 419400-47................................... 75, 78 419410 ........................................ 77, 78 419415 ........................................ 77, 78 419420 ........................................ 77, 78 419430 .............................................. 80 419450 ........................................ 75, 80 419451 ........................................ 75, 80 419452 ........................................ 75, 80 419455 .............................................. 80 419460 ........................................ 75, 80 419461 ........................................ 75, 80 419462 ........................................ 75, 80 419465 .............................................. 80 419470 .............................................. 80 419471 .............................................. 80 419501 .............................................. 79
WHEATON
419502 .............................................. 79 419505 .............................................. 79 419506 .............................................. 79 419520-47................................... 75, 79 419530-47................................... 75, 79 419620 .............................................. 78 420836 .............................................. 71 428126 .............................................. 69 428146 .............................................. 69 428164 .............................................. 69 434320 .............................................. 71 438764 .............................................. 70 438782 .............................................. 70 439195 .............................................. 72 439215 .............................................. 72 439234 .............................................. 72 439264 .............................................. 72
600 620189 .............................................. 71 635134 ........................................ 49, 69 635165 .............................................. 49 635229 ........................................ 76, 80 635232 ........................................ 77, 80 635233 ........................................ 77, 80 635245 ........................................ 77, 80 635525 ........................................ 78, 80 635526 ........................................ 78, 80 635527 ........................................ 78, 80 635920 .............................................. 98 635921 .............................................. 98 635926 .............................................. 67 635965 .............................................. 67 651446 ........................................ 1, 107 651462 ................................................ 1 651463 ................................................ 1 651464 ................................................ 1 651466 ................................................ 1 651469 ................................................ 1 651470 ................................................ 1 651482 ................................................ 1 651483 ................................................ 1 651486 ................................................ 1 651490 ............................................ 142 651492 ............................................ 142 651502 ........................................ 2, 107 651506 ........................................ 2, 107 651509 ........................................ 2, 107 651510 ........................................ 2, 107 651905 .................................... 110, 154 651907 .................................... 110, 154 651954 .................................... 110, 154 677670 .............................................. 72 690170 .............................................. 70
700 709782 .............................................. 68 709882 .............................................. 68 753680 .............................................. 64 753685 .............................................. 64 757766 .............................................. 66 757769 .............................................. 66 757770 .............................................. 66 757772 .............................................. 66 757773 .............................................. 66 757775 .............................................. 66 757776 .............................................. 66 758966 .............................................. 66 758969 .............................................. 66 758970 .............................................. 66 758972 .............................................. 66 758973 .............................................. 66 758976 .............................................. 66
773900 .............................................. 70 774510 .............................................. 70 774515 .............................................. 70 774600 .............................................. 71 774650 .............................................. 72 776580 ................................................ 4 798550 ............................................ 137
800 805000 .............................................. 11 805001 .............................................. 11 805003 .............................................. 11 805007 .............................................. 11 805011 .............................................. 11 805015 .............................................. 11 805020 .............................................. 11 805021 .............................................. 11 805023 .............................................. 11 805027 .............................................. 11 805031 .............................................. 11 844000 .............................................. 99 844002 .............................................. 99 844004 .............................................. 99 844021 ............................................ 100 844022 ............................................ 100 844023 ............................................ 100 844024 ............................................ 101 844025 ............................................ 101 844026 ............................................ 101 844027 ............................................ 101 844029 ............................................ 101 844030 ............................................ 101 844032 ............................................ 101 844035 ............................................ 101 844038 ............................................ 101 844060 ............................................ 100 844062 ............................................ 100 844064 ............................................ 100 844068 ............................................ 100 851160 ............................................ 118 851162 ............................................ 118 851163 ............................................ 118 851164 ............................................ 118 851166 ............................................ 118 851168 ............................................ 118 851172 ............................................ 119 851174 ............................................ 119 851176 ............................................ 119 851178 ............................................ 119 851179-01....................................... 119 851179-02....................................... 119 851180-01....................................... 119 851180-02....................................... 119 851181-01....................................... 119 851181-02....................................... 119 851181-03....................................... 119 851181-04....................................... 119 851183-2......................................... 118 851184-2......................................... 118 851187-2......................................... 118 851188-2......................................... 118 851206 ............................................ 113 851246 ............................................ 119 851247 ............................................ 119 851248 ............................................ 119 851249 ............................................ 120 851250 ............................................ 120 851271 ............................................ 119 851272 ............................................ 119 851276 ............................................ 119 851277 ............................................ 119 851295 ............................................ 121
200
851299 ............................................ 121 851303 ............................................ 121 851307 ............................................ 121 851311 ............................................ 121 851321 ............................................ 121 851322 ............................................ 121 851323 ............................................ 121 851324 ............................................ 121 851325 ............................................ 121 851330 ............................................ 121 851331 ............................................ 121 851332 ............................................ 121 851333 ............................................ 121 851334 ............................................ 121 851340 ............................................ 118 851341 ............................................ 120 851343 ............................................ 114 851344 ............................................ 114 851345 ............................................ 118 851346 ............................................ 120 851355 ............................................ 119 851357 ............................................ 119 851358 ............................................ 119 851371 ............................................ 104 851372 ............................................ 104 851373 ............................................ 104 851375 ............................................ 104 851380 .................................... 105, 122 851381 ............................................ 105 851382 ............................................ 105 851383 .................................... 105, 122 851388 ............................................ 105 851389 ............................................ 105 851391 ............................................ 106 851392 ............................................ 106 851393 ............................................ 106 851395 ............................................ 106 851401 ............................................ 106 851402 ............................................ 106 851403 ............................................ 106 851405 ............................................ 106 851411 ............................................ 105 851412 ............................................ 105 851414 ............................................ 106 851415 ............................................ 106 851419 ............................................ 105 851421 ............................................ 106 851422 ............................................ 106 851424 ............................................ 105 851430 ............................................ 106 851431 ............................................ 106 851601 ............................................ 121 851604 ............................................ 121 851608 ............................................ 121 851612 ............................................ 121 851616 ............................................ 121 851620 ............................................ 121 851624 ............................................ 121 851625 ............................................ 121 868608 ............................................ 149 868615 ............................................ 149 868617 ............................................ 149 868804 ............................................ 149 868805 ............................................ 149 868806 ............................................ 149 868808 ............................................ 149
1.800.225.1437 (U.S. & Canada only) | +1.856.825.1100 | +1.856.825.1368 (F) | www.wheatonsci.com
201
)NDEX ¬Numeric 868810 ............................................ 149 885020 ............................................ 130 885025 ............................................ 130 885200 ............................................ 129 885220 ............................................ 129 885230 ............................................ 129 885231 ............................................ 129 885232 ............................................ 129 885235 ............................................ 130 885236 ............................................ 130 885250 ............................................ 130 885252 ............................................ 130 885253 ............................................ 130 885255 ............................................ 130 885256 ............................................ 130 885257 ............................................ 130 885258 ............................................ 130 885295 ............................................ 132 885300 ............................................ 130 885302 ............................................ 130 885303 ............................................ 130 885380 ............................................ 132 885540 ............................................ 132
900 900170 ............................................ 136 900200 ............................................ 136 900201 ............................................ 136 900202 ............................................ 136 900203 ............................................ 136 900204 ............................................ 136 900205 ............................................ 136 900234 ............................................ 136 900254 ............................................ 136 900301 ............................................ 136 900302 ............................................ 136 900303 ............................................ 136 900304 ............................................ 136 900400 ............................................ 136 900401 ............................................ 136 900402 ............................................ 136 900403 ............................................ 136 900404 ............................................ 136 900470 ............................................ 137 900520 ............................................ 137 900522 ............................................ 137 900570 ............................................ 137 900575 ............................................ 137 900620 ............................................ 137 900630 ...................................... 97, 136 903007 .............................................. 71 903061 ...................................... 71, 145 903063 ...................................... 71, 145 903475 .............................................. 47 905275 .............................................. 47 905462 .............................................. 47 905465 .............................................. 47 905475 .............................................. 47 923769 .............................................. 70 962515 .................................. 69, 71, 72 964453 ........................................ 70, 72 970440 .............................................. 67 985688 .............................................. 91 985721 ............................................ 141 985726 ............................................ 141 985730 ............................................ 141 985731 ............................................ 141 985734 ............................................ 140 985735 ............................................ 140 985736 ............................................ 140 985737 ............................................ 140 985738 ............................................ 140 985739 ............................................ 140
WHEATON
985742 ............................................ 141 985743 ............................................ 141 985744 ............................................ 141 985745 ............................................ 140 985746 ............................................ 140 985747 ............................................ 140 985750 ............................................ 149 985800 ............................................ 149 985810 .................................... 142, 149 986294 .............................................. 71 986297 .............................................. 71 986298 .............................................. 71 986299 .............................................. 71 986491 ............................................ 148 986492 ............................................ 148 986532 ............................................ 146 986540 ............................................ 146 986541 ............................................ 146 986542 ............................................ 146 986546 ............................................ 146 986548 ............................................ 146 986560 ............................................ 146 986561 ............................................ 146 986562 ............................................ 146 986568 ............................................ 146 986580 ............................................ 146 986581 ............................................ 146 986582 ............................................ 146 986586 ............................................ 146 986590 ............................................ 146 986591 ............................................ 146 986644 ............................................ 148 986645 ............................................ 148 986700 ............................................ 147 986701 ............................................ 147 986702 ............................................ 147 986704 ............................................ 147 986706 ............................................ 147 986710 ............................................ 147 986711 ............................................ 147 986712 ............................................ 147 986714 ............................................ 147 986716 ............................................ 147 986720 ............................................ 147 986721 ............................................ 147 986722 ............................................ 147 986724 ............................................ 147 986726 ............................................ 147 986730 ............................................ 147 986731 ............................................ 147 986732 ............................................ 147 986734 ............................................ 147 986736 ............................................ 147 986740 ............................................ 147 986741 ............................................ 147 986742 ............................................ 147 986744 ............................................ 147 986746 ............................................ 147 986750 ............................................ 147 986751 ............................................ 147 986752 ............................................ 147 986754 ............................................ 147 986756 ............................................ 147 990250 ............................................ 130 990350 ............................................ 131 990400 ............................................ 131 990450 ............................................ 131 990470 ............................................ 131 990471 ............................................ 131 990476 ............................................ 132 990477 .................................... 130, 131 990760 .............................................. 82 990760-4........................................... 82
I Series I050349 ........................................... 101 I050567 ............................................. 56 I050694 ................................... 126, 127 I050916 ........................................... 101 I050917 ........................................... 101 I051154 ........................................... 101 I052665 ............................................. 38 I054106 ........................................... 128 I054342 ........................................... 127 I054343 ........................................... 127 I054346 ........................................... 127 I054348 ........................................... 127 I057152 ............................................. 55 I057153 ............................................. 55 I057459 ............................................. 54 I057501 ............................................. 54 I057502 ............................................. 55 I057599 ............................................. 54 I057606 ............................................. 64 I057617 ............................................. 55 I057621 ............................................. 55 I057622 ............................................. 55 I057638 ............................................. 54
W Series W125495 ........................................... 65
W 200 W209677 ........................................... 28 W209678 ........................................... 28 W209679 ........................................... 28 W209900 ........................................... 28 W209901 ........................................... 28 W209902 ........................................... 28 W209903 ........................................... 28 W209904 ........................................... 28 W209905 ........................................... 28 W209906 ........................................... 28 W209907 ........................................... 28 W209908 ........................................... 28 W209909 ........................................... 28 W209910 ........................................... 28 W209911 ........................................... 28 W209912 ........................................... 28 W209913 ........................................... 28 W209914 ........................................... 28 W209915 ........................................... 28 W209916 ........................................... 28 W209917 ........................................... 28 W211523 ............................................. 5 W211734 ............................................. 5 W211735 ............................................. 5 W211754 ............................................. 5 W211755 ............................................. 5 W215235 ........................................... 14 W215255 ........................................... 14 W216014 ........................................... 14 W216015 ........................................... 14 W216800 ............................................. 7 W216801 ............................................. 7 W216802 ............................................. 7 W216803 ............................................. 7 W216804 ............................................. 7 W216805 ............................................. 7 W216806 ............................................. 7 W216807 ............................................. 7 W216808 ............................................. 7 W216809 ............................................. 7 W216810 ............................................. 7 W216811 ............................................. 7 W216812 ............................................. 7 W216813 ............................................. 7
W216814 ............................................. 7 W216815 ............................................. 7 W216816 ............................................. 7 W216817 ............................................. 7 W216818 ............................................. 7 W216819 ............................................. 7 W216820 ............................................. 7 W216821 ............................................. 7 W216822 ............................................. 7 W216823 ............................................. 7 W216824 ............................................. 7 W216825 ............................................. 7 W216826 ............................................. 7 W216827 ............................................. 7 W216828 ............................................. 7 W216829 ............................................. 7 W216830 ............................................. 7 W216831 ............................................. 7 W216832 ............................................. 7 W216833 ............................................. 7 W216834 ............................................. 7 W216835 ............................................. 7 W216836 ............................................. 8 W216837 ............................................. 8 W216838 ............................................. 8 W216839 ............................................. 8 W216840 ............................................. 8 W216841 ............................................. 8 W216842 ............................................. 8 W216843 ............................................. 8 W216844 ............................................. 8 W216845 ............................................. 8 W216846 ............................................. 8 W216847 ............................................. 8 W216848 ............................................. 8 W216849 ............................................. 8 W216850 ............................................. 8 W216851 ............................................. 8 W216852 ............................................. 8 W216853 ............................................. 8 W216854 ............................................. 8 W216855 ............................................. 8 W216856 ............................................. 8 W216857 ............................................. 8 W216858 ............................................. 8 W216859 ............................................. 8 W216860 ............................................. 8 W216861 ............................................. 8 W216862 ............................................. 8 W216863 ............................................. 8 W216864 ............................................. 8 W216865 ............................................. 8 W216866 ............................................. 8 W216867 ............................................. 8 W216868 ............................................. 8 W216869 ............................................. 8 W216870 ............................................. 8 W216871 ............................................. 8 W216872 ............................................. 8 W216873 ............................................. 8 W216874 ............................................. 8 W216875 ............................................. 8 W216876 ............................................. 8 W216877 ............................................. 8 W216878 ............................................. 8 W216879 ............................................. 8 W216880 ............................................. 8 W216881 ............................................. 8 W216882 ............................................. 8 W216883 ............................................. 8 W216884 ............................................. 8 W216885 ............................................. 8 W216886 ............................................. 8 W216887 ............................................. 8
1.800.225.1437 (U.S. & Canada only) | +1.856.825.1100 | +1.856.825.1368 (F) | www.wheatonsci.com
)NDEX ¬Numeric W216888 ............................................. 8 W216889 ............................................. 8 W216890 ............................................. 8 W216891 ............................................. 8 W216892 ............................................. 8 W216893 ............................................. 8 W216894 ............................................. 8 W216895 ............................................. 8 W216896 ............................................. 8 W216897 ............................................. 8 W216898 ............................................. 8 W216899 ............................................. 8 W216900 ............................................. 8 W216901 ............................................. 8 W216902 ............................................. 8 W216903 ............................................. 9 W216904 ............................................. 9 W216905 ............................................. 9 W216906 ............................................. 9 W216907 ............................................. 9 W216908 ............................................. 9 W216909 ............................................. 9 W216910 ............................................. 9 W216911 ............................................. 9 W216912 ............................................. 9 W216913 ............................................. 9 W216914 ........................................... 10 W216915 ........................................... 10 W216916 ........................................... 10 W216917 ........................................... 10 W216918 ........................................... 10 W216919 ........................................... 10 W216920 ........................................... 10 W216921 ........................................... 10 W216922 ........................................... 10 W216923 ........................................... 10 W216924 ............................................. 9 W216925 ............................................. 9 W216926 ............................................. 9 W216927 ............................................. 9 W216928 ............................................. 9 W216929 ............................................. 9 W216930 ............................................. 9 W216931 ............................................. 9 W216932 ............................................. 9 W216933 ............................................. 9 W216934 ............................................. 9 W216935 ............................................. 9 W216936 ............................................. 9 W216937 ............................................. 9 W216938 ............................................. 9 W216939 ........................................... 11 W216940 ........................................... 11 W216941 ........................................... 11 W216942 ........................................... 11 W216943 ........................................... 11 W216944 ........................................... 11 W216945 ........................................... 11 W216946 ........................................... 11 W216947 ........................................... 11 W216948 ........................................... 11 W216949 ........................................... 11 W216950 ........................................... 11 W216951 ........................................... 11 W216952 ........................................... 11 W216953 ........................................... 11 W216954 ........................................... 11 W216955 ........................................... 11 W216956 ........................................... 11 W216957 ........................................... 11 W216958 ........................................... 11 W216959 ........................................... 11 W216960 ........................................... 11 W216961 ........................................... 11
WHEATON
W216962 ........................................... 11 W216963 ........................................... 11 W216964 ........................................... 11 W216965 ........................................... 11 W216966 ........................................... 10 W216967 ........................................... 10 W216968 ........................................... 10 W216969 ........................................... 10 W216970 ........................................... 10 W216971 ........................................... 10 W216972 ........................................... 10 W216973 ........................................... 10 W216974 ........................................... 10 W216975 ........................................... 10 W216976 ........................................... 10 W216977 ........................................... 10 W216978 ........................................... 10 W216979 ........................................... 10 W216980 ........................................... 10 W216981 ........................................... 10 W216982 ........................................... 10 W216983 ........................................... 10 W216984 ........................................... 10 W216985 ........................................... 10 W216986 ........................................... 10 W216987 ........................................... 10 W216988 ........................................... 10 W216989 ........................................... 10 W216990 ........................................... 10 W216991 ........................................... 10 W216992 ........................................... 10 W216993 ........................................... 10 W216994 ........................................... 10 W216995 ............................................. 7 W216996 ............................................. 7 W216997 ............................................. 7 W216998 ............................................. 7 W216999 ............................................. 7 W217000 ............................................. 7 W217001 ............................................. 7 W217002 ............................................. 7 W217003 ............................................. 7 W217004 ............................................. 7 W217005 ............................................. 7 W217006 ............................................. 7 W217007 ............................................. 7 W217008 ............................................. 7 W217009 ............................................. 7 W219937 ........................................... 17 W219980 ........................................... 30 W219981 ........................................... 22 W219982 ........................................... 22 W219983 ........................................... 22 W219985 ........................................... 22 W219986 ........................................... 22 W219987 ........................................... 22 W219990 ........................................... 22 W219991 ........................................... 22 W219992 ........................................... 22 W219993 ........................................... 22 W219994 ........................................... 22 W219995 ........................................... 22 W219996 ........................................... 22 W224100-080.................................. 154 W224100-093.................................. 154 W224100-193.................................... 34 W224100-193.................................. 110 W224100-400.................................... 33 W224100-400.................................. 110 W224100-401.................................... 33 W224100-401.................................. 110 W224100-402.................................... 33 W224100-402.................................. 110 W224100-405.................................... 33
W224100-405.................................. 110 W224100-406.................................... 33 W224100-406.................................. 110 W224100-407.................................... 33 W224100-407.................................. 110 W224100-408.................................... 33 W224100-408.................................. 110 W224100-420.................................... 33 W224100-420.................................. 110 W224100-421.................................... 33 W224100-421.................................. 110 W224215 ........................................... 91 W224216 ........................................... 91 W224217 ........................................... 91 W224581 ......................................... 150 W224582 ......................................... 150 W224584 ......................................... 150 W224585 ......................................... 150 W224586 ......................................... 150 W224588 ......................................... 150 W224589 ......................................... 150 W224590 ......................................... 150 W224591 ......................................... 150 W224600 ................................... 41, 142 W224601 ......................................... 143 W224603 ......................................... 143 W224604 ......................................... 150 W224605 ......................................... 150 W224606 ......................................... 150 W224607 ......................................... 150 W224608 ......................................... 150 W224609 ......................................... 150 W224610 ......................................... 150 W224611 ......................................... 150 W224612 ......................................... 150 W224613 ......................................... 143 W224614 ......................................... 150 W224617 ......................................... 143 W224618 ......................................... 143 W224619 ......................................... 143 W224620-01...................................... 90 W224620-0103.................................. 90 W224620-0104.................................. 90 W224620-0105.................................. 90 W224620-0107.................................. 90 W224620-02...................................... 90 W224620-0203.................................. 90 W224620-0204.................................. 90 W224620-0205.................................. 90 W224620-0207.................................. 90 W224620-03...................................... 90 W224620-0303.................................. 90 W224620-0304.................................. 90 W224620-0305.................................. 90 W224620-0307.................................. 90 W224621-01...................................... 90 W224621-0103.................................. 90 W224621-0104.................................. 90 W224621-0105.................................. 90 W224621-0107.................................. 90 W224621-02...................................... 90 W224621-0203.................................. 90 W224621-0204.................................. 90 W224621-0205.................................. 90 W224621-0207.................................. 90 W224621-03...................................... 90 W224621-0303.................................. 90 W224621-0304.................................. 90 W224621-0305.................................. 90 W224621-0307.................................. 90 W224622-01...................................... 90 W224622-0103.................................. 90
202
W224622-0104.................................. 90 W224622-0105.................................. 90 W224622-0107.................................. 90 W224622-02...................................... 90 W224622-0203.................................. 90 W224622-0204.................................. 90 W224622-0205.................................. 90 W224622-0207.................................. 90 W224622-03...................................... 90 W224622-0303.................................. 90 W224622-0304.................................. 90 W224622-0305.................................. 90 W224622-0307.................................. 90 W224623-01...................................... 90 W224623-0103.................................. 90 W224623-0104.................................. 90 W224623-0105.................................. 90 W224623-0107.................................. 90 W224623-02...................................... 90 W224623-0203.................................. 90 W224623-0204.................................. 90 W224623-0205.................................. 90 W224623-0207.................................. 90 W224623-03...................................... 90 W224623-0303.................................. 90 W224623-0304.................................. 90 W224623-0305.................................. 90 W224623-0307.................................. 90 W224630 ......................................... 143 W224632 ......................................... 143 W224634 ......................................... 143 W224636 ......................................... 143 W224681 ......................................... 150 W224682 ......................................... 150 W224684 ......................................... 150 W224693 ......................................... 153 W224694 ......................................... 153 W224695 ......................................... 153 W224696 ......................................... 153 W224697 ......................................... 153 W224698 ......................................... 153 W224809 ......................................... 152 W224810 ......................................... 152 W224815 ......................................... 151 W224820 ......................................... 150 W224840 ......................................... 150 W224894 ......................................... 152 W224895 ......................................... 152 W224896 ......................................... 152 W224897 ......................................... 152 W224954 ......................................... 153 W224955 ......................................... 153 W225100 ......................................... 152 W225122 ........................................... 87 W225123 ........................................... 87 W225125 ........................................... 87 W225149 ........................................... 94 W225150 ........................................... 94 W225150-01...................................... 94 W225150-0101.................................. 94 W225150-0103.................................. 94 W225150-0104.................................. 94 W225150-0105.................................. 94 W225150-0107.................................. 94 W225150-02...................................... 94 W225150-0201.................................. 94
1.800.225.1437 (U.S. & Canada only) | +1.856.825.1100 | +1.856.825.1368 (F) | www.wheatonsci.com
203
)NDEX ¬Numeric W225150-0203.................................. 94 W225150-0204.................................. 94 W225150-0205.................................. 94 W225150-0207.................................. 94 W225150-03...................................... 94 W225150-0301.................................. 94 W225150-06...................................... 94 W225150-0601.................................. 94 W225150-08...................................... 94 W225150-0801.................................. 94 W225151 ........................................... 94 W225151-01...................................... 95 W225151-0101.................................. 95 W225151-0103.................................. 95 W225151-0104.................................. 95 W225151-0105.................................. 95 W225151-0107.................................. 95 W225151-02...................................... 95 W225151-0201.................................. 95 W225151-0203.................................. 95 W225151-0204.................................. 95 W225151-0205.................................. 95 W225151-0207.................................. 95 W225151-03...................................... 95 W225151-0301.................................. 95 W225151-04...................................... 95 W225151-0401.................................. 95 W225151-06...................................... 95 W225151-0601.................................. 95 W225151-08...................................... 95 W225151-0801.................................. 95 W225152 ........................................... 94 W225152-01...................................... 95 W225152-0101.................................. 95 W225152-0103.................................. 95 W225152-0104.................................. 95 W225152-0105.................................. 95 W225152-0107.................................. 95 W225152-02...................................... 95 W225152-0201.................................. 95 W225152-0203.................................. 95 W225152-0204.................................. 95 W225152-0205.................................. 95 W225152-0207.................................. 95 W225152-03...................................... 95 W225152-0301.................................. 95 W225152-06...................................... 95 W225152-0601.................................. 95 W225152-08...................................... 95 W225152-0801.................................. 95 W225153 ........................................... 94 W225153-01...................................... 95 W225153-0101.................................. 95 W225153-0103.................................. 95 W225153-0104.................................. 95 W225153-0105.................................. 95 W225153-0107.................................. 95 W225153-02...................................... 95 W225153-0201.................................. 95 W225153-0203.................................. 95 W225153-0204.................................. 95 W225153-0205.................................. 95 W225153-0207.................................. 95 W225153-03...................................... 95 W225153-0301.................................. 95 W225153-06...................................... 95 W225153-0601.................................. 95 W225153-08...................................... 95 W225153-0801.................................. 95 W225154-04...................................... 94 W225154-0401.................................. 94 W225156-04...................................... 95 W225156-0401.................................. 95 W225157-04...................................... 95
WHEATON
W225157-0401.................................. 95 W225171 ........................................... 94 W225172-01...................................... 88 W225172-0103.................................. 88 W225172-0104.................................. 88 W225172-0107.................................. 88 W225172-02...................................... 88 W225172-0203.................................. 88 W225172-0204.................................. 88 W225172-0207.................................. 88 W225172-03...................................... 88 W225172-0303.................................. 88 W225172-0304.................................. 88 W225172-0307.................................. 88 W225172-12...................................... 88 W225172-1203.................................. 88 W225172-1204.................................. 88 W225172-1207.................................. 88 W225173-01...................................... 88 W225173-0103.................................. 88 W225173-0104.................................. 88 W225173-0107.................................. 88 W225173-02...................................... 88 W225173-0203.................................. 88 W225173-0204.................................. 88 W225173-0207.................................. 88 W225173-03...................................... 88 W225173-0303.................................. 88 W225173-0304.................................. 88 W225173-0307.................................. 88 W225173-12...................................... 88 W225173-1203.................................. 88 W225173-1204.................................. 88 W225173-1207.................................. 88 W225174-01...................................... 88 W225174-0103.................................. 88 W225174-0104.................................. 88 W225174-0107.................................. 88 W225174-02...................................... 88 W225174-0203.................................. 88 W225174-0204.................................. 88 W225174-0207.................................. 88 W225174-03...................................... 88 W225174-0303.................................. 88 W225174-0304.................................. 88 W225174-0307.................................. 88 W225174-12...................................... 88 W225174-1203.................................. 88 W225174-1204.................................. 88 W225174-1207.................................. 88 W225175-01...................................... 88 W225175-0103.................................. 88 W225175-0104.................................. 88 W225175-0107.................................. 88 W225175-02...................................... 88 W225175-0203.................................. 88 W225175-0204.................................. 88 W225175-0207.................................. 88 W225175-03...................................... 88 W225175-0303.................................. 88 W225175-0304.................................. 88 W225175-0307.................................. 88 W225175-12...................................... 88 W225175-1203.................................. 88 W225175-1204.................................. 88 W225175-1207.................................. 88 W225181 ........................................... 93 W225186 ........................................... 93 W225187 ........................................... 93 W225223-01...................................... 92 W225223-0103.................................. 92 W225223-0104.................................. 92 W225223-0107.................................. 92 W225223-02...................................... 92
W225223-0203.................................. 92 W225223-0204.................................. 92 W225223-0207.................................. 92 W225223-03...................................... 92 W225223-0303.................................. 92 W225223-0304.................................. 92 W225223-0307.................................. 92 W225223-12...................................... 92 W225223-1203.................................. 92 W225223-1204.................................. 92 W225223-1207.................................. 92 W225225-01...................................... 92 W225225-0103.................................. 92 W225225-0104.................................. 92 W225225-0107.................................. 92 W225225-02...................................... 92 W225225-0203.................................. 92 W225225-0204.................................. 92 W225225-0207.................................. 92 W225225-03...................................... 92 W225225-0303.................................. 92 W225225-0304.................................. 92 W225225-0307.................................. 92 W225225-12...................................... 92 W225225-1203.................................. 92 W225225-1204.................................. 92 W225225-1207.................................. 92 W225237 ........................................... 93 W225243 ........................................... 87 W225244 ........................................... 87 W225251 ........................................... 87 W225278-01...................................... 91 W225278-02...................................... 91 W225278-03...................................... 91 W225280-01...................................... 91 W225280-02...................................... 91 W225280-03...................................... 91 W225291 ......................................... 150 W225292 ......................................... 150 W225293 ......................................... 150 W225300 ..................................... 35, 96 W225301 ..................................... 35, 96 W225302 ..................................... 35, 96 W225303 ..................................... 35, 96 W225326-01...................................... 92 W225326-0101.................................. 92 W225326-0103.................................. 92 W225326-0104.................................. 92 W225326-0105.................................. 92 W225326-0107.................................. 92 W225326-02...................................... 92 W225326-0201.................................. 92 W225326-0203.................................. 92 W225326-0204.................................. 92 W225326-0205.................................. 92 W225326-0207.................................. 92 W225326-03...................................... 92 W225326-0301.................................. 92 W225326-04...................................... 92 W225326-0401.................................. 92 W225326-06...................................... 92 W225326-0601.................................. 92 W225326-08...................................... 92 W225326-0801.................................. 92 W225328-01...................................... 92 W225328-0101.................................. 92 W225328-0103.................................. 92 W225328-0104.................................. 92 W225328-0105.................................. 92 W225328-0107.................................. 92 W225328-02...................................... 92 W225328-0201.................................. 92 W225328-0203.................................. 92 W225328-0204.................................. 92
W225328-0205.................................. 92 W225328-0207.................................. 92 W225328-03...................................... 92 W225328-0301.................................. 92 W225328-04...................................... 92 W225328-0401.................................. 92 W225328-06...................................... 92 W225328-0601.................................. 92 W225328-08...................................... 92 W225328-0801.................................. 92 W225331-01...................................... 94 W225331-0101.................................. 94 W225331-0103.................................. 94 W225331-0104.................................. 94 W225331-0105.................................. 94 W225331-0107.................................. 94 W225332-02...................................... 94 W225332-0201.................................. 94 W225332-0203.................................. 94 W225332-0204.................................. 94 W225332-0205.................................. 94 W225332-0207.................................. 94 W225333-03...................................... 94 W225333-0301.................................. 94 W225334A-04 ................................... 94 W225334A-0401................................ 94 W225336-06...................................... 94 W225336-0601.................................. 94 W225338-08...................................... 94 W225338-0801.................................. 94 W225350 ..................................... 35, 96 W225351 ..................................... 35, 96 W225352 ..................................... 35, 96 W225353 ..................................... 35, 96 W225900 ........................................... 95 W225910 ........................................... 95 W226060 ......................................... 152 W228781 ................................. 149, 153 W228782 ................................. 149, 153 W239298 ................................... 8, 9, 37 W239299 ....................................... 8, 37 W239300 ................................... 8, 9, 37 W239301 ................................... 8, 9, 37 W239302 ................................... 8, 9, 37 W239303 ........................................... 37 W239304 ....................................... 9. 37 W239306 ....................................... 9, 37 W239308 ........................................... 37 W240382 ........................................... 37 W240406 ................................... 37, 152 W240506 .................................... 38, 95 W240507 ..................................... 38, 95 W240508 ........................................... 38 W240509 ................................... 38, 110 W240509 ........................................ 154 W240515 ........................................... 38 W240516 ........................................... 38 W240517 ........................................... 38 W240518 ................................... 38, 142 W240540 ........................................... 38 W240574 ........................................... 38 W240580 ..................................... 38, 95 W240581 ..................................... 38, 95 W240583 ........................................... 38 W240584 ........................................... 38 W240585 ........................................... 38 W240586 ........................................... 38 W240587 ........................................... 38 W240588 ........................................... 38 W240590 ........................................... 38 W240593 ..................................... 38, 68 W240594 ........................................... 38 W240596 ........................................... 38 W240598 ................................... 38, 142
1.800.225.1437 (U.S. & Canada only) | +1.856.825.1100 | +1.856.825.1368 (F) | www.wheatonsci.com
)NDEX ¬Numeric W240599 ........................................... 38 W240751 ..................................... 15, 42 W240752 ........................................... 42 W240820 ..................................... 37, 41 W240820 ........................................ 143 W240821 ..................................... 37, 41 W240821 ......................................... 143 W240822 ..................................... 37, 41 W240822 ......................................... 143 W240823 ..................................... 37, 41 W240823 ......................................... 143 W240824 ..................................... 37, 41 W240824 ......................................... 143 W240825 ..................................... 37, 41 W240825 ......................................... 143 W240827 ..................................... 37, 41 W240827 ......................................... 143 W240830 ................................... 41, 143 W240831 ................................... 41, 143 W240832 ................................... 41, 143 W240833 ................................... 41, 143 W240834 ................................... 41, 143 W240835 ................................... 41, 143 W240836 ................................... 41, 143 W240837 ................................... 41, 143 W240840 ................................... 41, 143 W240841 ................................... 41, 143 W240842 ................................... 41, 143 W240843 ................................... 41, 143 W240844 ................................... 41, 143 W240845 ................................... 41, 143 W240846 ................................... 41, 143 W240847 ................................... 41, 143 W242401-A ....................................... 24 W242401-X........................................ 24 W242401-01-A .................................. 24 W242401-01-X .................................. 24 W242402-A ....................................... 24 W242402-X........................................ 24 W242403-A ....................................... 24 W242403-X........................................ 24 W242404-A ....................................... 24 W242404-X........................................ 24 W242405-A ....................................... 24 W242405-X........................................ 24 W242406-A ....................................... 24 W242406-X........................................ 24 W242407-A ....................................... 24 W242407-X........................................ 24 W242408-A ....................................... 24 W242408-X........................................ 24 W242410-A ....................................... 24 W242410-X........................................ 24 W242411-A ....................................... 24 W242411-X........................................ 24 W242411-01-A .................................. 24 W242411-01-X .................................. 24 W242412-A ....................................... 24 W242412-X........................................ 24 W242413-A ....................................... 24 W242413-X........................................ 24 W242414-A ....................................... 24 W242414-X........................................ 24 W242415-A ....................................... 24 W242415-X........................................ 24 W242416-A ....................................... 24 W242416-X........................................ 24 W242417-A ....................................... 24 W242417-X........................................ 24 W242418-A ....................................... 24 W242418-X........................................ 24 W242420-A ....................................... 24 W242420-X........................................ 24 W242421-A ....................................... 24
WHEATON
W242421-X........................................ 24 W242421-01-A .................................. 24 W242421-01-X .................................. 24 W242421-A ....................................... 24 W242421-X........................................ 24 W242422-A ....................................... 24 W242422-X........................................ 24 W242423-A ....................................... 24 W242423-X........................................ 24 W242424-A ....................................... 24 W242424-X........................................ 24 W242425-A ....................................... 24 W242425-X........................................ 24 W242426-A ....................................... 24 W242426-X........................................ 24 W242427-A ....................................... 24 W242427-X........................................ 24 W242428-A ....................................... 24 W242428-X........................................ 24 W242430-A ....................................... 24 W242430-X........................................ 24 W242431-A ....................................... 24 W242431-X........................................ 24 W242431-01-A .................................. 24 W242431-01-X .................................. 24 W242432-A ....................................... 24 W242432-X........................................ 24 W242433-A ....................................... 24 W242433-X........................................ 24 W242434-A ....................................... 24 W242434-X........................................ 24 W242435-A ....................................... 24 W242435-X........................................ 24 W242436-A ....................................... 24 W242436-X........................................ 24 W242437-A ....................................... 24 W242437-X........................................ 24 W242438-A ....................................... 24 W242438-X........................................ 24 W242440-A ....................................... 24 W242440-X........................................ 24 W242501-A ....................................... 24 W242501-X........................................ 24 W242501-01-A .................................. 24 W242501-01-X .................................. 24 W242502-A ....................................... 24 W242502-X........................................ 24 W242503-A ....................................... 24 W242503-X........................................ 24 W242504-A ....................................... 24 W242504-X........................................ 24 W242505-A ....................................... 24 W242505-X........................................ 24 W242506-A ....................................... 24 W242506-X........................................ 24 W242507-A ....................................... 24 W242507-X........................................ 24 W242508-A ....................................... 24 W242508-X........................................ 24 W242509-A ....................................... 24 W242510-A ....................................... 24 W242510-X........................................ 24 W242511-A ....................................... 24 W242511-X........................................ 24 W242511-01-A .................................. 24 W242511-01-X .................................. 24 W242512-A ....................................... 24 W242512-X........................................ 24 W242513-A ....................................... 24 W242513-X........................................ 24 W242514-A ....................................... 24 W242514-X........................................ 24 W242515-A ....................................... 24 W242515-X........................................ 24
W242516-A ....................................... 24 W242516-X........................................ 24 W242517-A ....................................... 24 W242517-X........................................ 24 W242518-A ....................................... 24 W242518-X........................................ 24 W242519-A ....................................... 24 W242520-A ....................................... 24 W242520-X........................................ 24 W242521-A ....................................... 24 W242521-X........................................ 24 W242521-01-A .................................. 24 W242521-01-X .................................. 24 W242522-A ....................................... 24 W242522-X........................................ 24 W242523-A ....................................... 24 W242523-X........................................ 24 W242524-A ....................................... 24 W242524-X........................................ 24 W242525-A ....................................... 24 W242525-X........................................ 24 W242526-A ....................................... 24 W242526-X........................................ 24 W242527-A ....................................... 24 W242527-X........................................ 24 W242528-A ....................................... 24 W242528-X........................................ 24 W242530-A ....................................... 24 W242530-X........................................ 24 W242531-A ....................................... 24 W242531-X........................................ 24 W242531-01-A .................................. 24 W242531-01-X .................................. 24 W242532-A ....................................... 24 W242532-X........................................ 24 W242533-A ....................................... 24 W242533-X........................................ 24 W242534-A ....................................... 24 W242534-X........................................ 24 W242535-A ....................................... 24 W242535-X........................................ 24 W242536-A ....................................... 24 W242536-X........................................ 24 W242537-A ....................................... 24 W242537-X........................................ 24 W242538-A ....................................... 24 W242538-X........................................ 24 W242540-A ....................................... 24 W242540-X........................................ 24 W242710 ................................... 41, 143 W242711 ................................... 37, 152 W242820 ........................................... 23 W242820-A ....................................... 23 W242820-X........................................ 23 W242821 ........................................... 23 W242821-A ....................................... 23 W242821-X........................................ 23 W242822 ........................................... 23 W242822-A ....................................... 23 W242822-X........................................ 23 W242823 ........................................... 23 W242823-A ....................................... 23 W242823-X........................................ 23 W242824 ........................................... 23 W242824-A ....................................... 23 W242824-X........................................ 23 W242825 ........................................... 23 W242825-A ....................................... 23 W242825-X........................................ 23 W242826 ........................................... 23 W242826-A ....................................... 23 W242826-X........................................ 23
204
W242827 ........................................... 23 W242827-X........................................ 23 W242828 ........................................... 23 W242828-X........................................ 23 W242830 ........................................... 23 W242830-A ....................................... 23 W242830-X........................................ 23 W242831 ........................................... 23 W242831-A ....................................... 23 W242831-X........................................ 23 W242832 ........................................... 23 W242832-A ....................................... 23 W242832-X........................................ 23 W242833 ........................................... 23 W242833-A ....................................... 23 W242833-X........................................ 23 W242834 ........................................... 23 W242834-A ....................................... 23 W242834-X........................................ 23 W242835 ........................................... 23 W242835-A ....................................... 23 W242835-X........................................ 23 W242836 ........................................... 23 W242836-A ....................................... 23 W242836-X........................................ 23 W242837 ........................................... 23 W242837-X........................................ 23 W242838 ........................................... 23 W242838-X........................................ 23 W264730 ........................................... 79 W297772 ........................................... 68 W297774 ........................................... 68 W297779 ........................................... 69
W 300 W348880-A ....................................... 62 W348880-B ....................................... 62 W348880-C ....................................... 62 W348880-D ....................................... 62 W348880-F ........................................ 62 W348880-G ....................................... 62 W348880-J ........................................ 62 W348881-A ....................................... 62 W348881-B ....................................... 62 W348881-C ....................................... 62 W348881-D ....................................... 62 W348881-F ........................................ 62 W348881-G ....................................... 62 W348881-J ........................................ 62 W348882-A ....................................... 62 W348882-B ....................................... 62 W348882-C ....................................... 62 W348882-D ....................................... 62 W348882-F ........................................ 62 W348882-G ....................................... 62 W348882-J ........................................ 62 W348884-A ....................................... 62 W348884-B ....................................... 62 W348884-C ....................................... 62 W348884-D ....................................... 62 W348884-F ........................................ 62 W348884-G ....................................... 62 W348884-J ........................................ 62 W348885-A ....................................... 62 W348885-B ....................................... 62 W348885-C ....................................... 62
1.800.225.1437 (U.S. & Canada only) | +1.856.825.1100 | +1.856.825.1368 (F) | www.wheatonsci.com
205
)NDEX ¬Numeric W348885-D ....................................... 62 W348885-F ........................................ 62 W348885-G ....................................... 62 W348885-J ........................................ 62 W348886 ........................................... 62 W348887 ........................................... 62 W348888 ........................................... 62 W348889 ........................................... 62 W348890 ........................................... 63 W348891 ........................................... 63 W348898 ........................................... 63 W348899 ........................................... 63 W348902-A ....................................... 63 W348902-B ....................................... 63 W348902-C ....................................... 63 W348902-D ....................................... 63 W348902-F ........................................ 63 W348902-G ....................................... 63 W348902-J ........................................ 63 W348920-CH ..................................... 58 W348923-A ....................................... 58 W348923-B ....................................... 58 W348923-C ....................................... 58 W348923-D ....................................... 58 W348923-F ........................................ 58 W348923-G ....................................... 58 W348923-J ........................................ 58 W348924-A ....................................... 58 W348924-B ....................................... 58 W348924-C ....................................... 58 W348924-D ....................................... 58 W348924-F ........................................ 58 W348924-G ....................................... 58 W348924-J ........................................ 58 W348930-CH ..................................... 58 W348970-J ........................................ 61 W348971-J ........................................ 61 W348972-J ........................................ 61 W348973-J ........................................ 61 W348974-J ........................................ 61 W348975-J ........................................ 61 W348976-J ........................................ 61 W348977-J ........................................ 61 W348978-J ........................................ 61 W348995-J ........................................ 60 W349005-J ........................................ 60 W349020-A ....................................... 63 W349020-B ....................................... 63 W349020-C ....................................... 63 W349020-D ....................................... 63 W349020-F ........................................ 63 W349020-G ....................................... 63 W349020-J ........................................ 63 W350000-A ....................................... 54 W350000-B ....................................... 54 W350000-C ....................................... 54 W350000-D ....................................... 54 W350000-F ........................................ 54 W350000-G ....................................... 54 W350000-J ........................................ 54 W350010-A ....................................... 54 W350010-B ....................................... 54 W350010-C ....................................... 54 W350010-D ....................................... 54 W350010-F ........................................ 54 W350010-G ....................................... 54 W350010-J ........................................ 54 W350020-A ....................................... 54 W350020-B ....................................... 54 W350020-C ....................................... 54 W350020-D ....................................... 54 W350020-F ........................................ 54 W350020-G ....................................... 54 W350020-J ........................................ 54
WHEATON
W350030-A ....................................... 54 W350030-B ....................................... 54 W350030-C ....................................... 54 W350030-D ....................................... 54 W350030-F ........................................ 54 W350030-G ....................................... 54 W350030-J ........................................ 54 W350040-A ....................................... 55 W350040-B ....................................... 55 W350040-C ....................................... 55 W350040-D ....................................... 55 W350040-F ........................................ 55 W350040-G ....................................... 55 W350040-J ........................................ 55 W350050-A ....................................... 55 W350050-B ....................................... 55 W350050-C ....................................... 55 W350050-D ....................................... 55 W350050-F ........................................ 55 W350050-G ....................................... 55 W350050-J ........................................ 55 W350060-A ....................................... 55 W350060-B ....................................... 55 W350060-C ....................................... 55 W350060-D ....................................... 55 W350060-F ........................................ 55 W350060-G ....................................... 55 W350060-J ........................................ 55 W350070-A ....................................... 57 W350070-B ....................................... 57 W350070-C ....................................... 57 W350070-D ....................................... 57 W350070-F ........................................ 57 W350070-G ....................................... 57 W350070-J ........................................ 57 W356426-J ........................................ 56 W356428-J ........................................ 56 W356430-J ........................................ 56 W356473 ........................................... 56 W356700-A ....................................... 56 W356700-B ....................................... 56 W356700-C ....................................... 56 W356700-D ....................................... 56 W356700-F ........................................ 56 W356700-G ....................................... 56 W356700-J ........................................ 56 W356805-1........................................ 51 W356805-4........................................ 51 W375020-A ..................................... 126 W375020-B ..................................... 126 W375020-C ..................................... 126 W375020-D ..................................... 126 W375020-F ...................................... 126 W375020-G ..................................... 126 W375020-J ...................................... 126 W375022 ......................................... 126 W375023 ......................................... 126 W375024 ......................................... 126 W375025 ......................................... 126
W 400-700 W416788 ........................................... 69 W438174 ........................................... 70 W651450 ..................................... 1, 107 W753684-C-E .................................... 64 W753684-D-E .................................... 64 W753684-F-E..................................... 64 W753684-G-E .................................... 64 W753684-J-E..................................... 64
W 800 W810000 ......................................... 113 W810002 ......................................... 113
W810004 ......................................... 113 W810006 ......................................... 113 W810008 ......................................... 113 W810010 ......................................... 113 W810012 ......................................... 113 W810014 ......................................... 113 W810016 ......................................... 113 W810018 ......................................... 113 W810020 ......................................... 113 W810022 ......................................... 113 W810024 ......................................... 113 W810026 ......................................... 113 W810028 ......................................... 113 W810030 ......................................... 113 W810032 ......................................... 113 W810034 ......................................... 113 W810036 ......................................... 113 W810038 ......................................... 113 W810040 ......................................... 113 W810042 ......................................... 113 W810044 ......................................... 113 W810046 ......................................... 113 W810048 ......................................... 113 W810050 ......................................... 113 W810052 ......................................... 113 W810054 ......................................... 113 W810056 ......................................... 113 W810058 ......................................... 113 W810060 ......................................... 113 W810062 ......................................... 113 W810300 ......................................... 112 W810302 ......................................... 112 W810304 ......................................... 112 W810306 ......................................... 112 W810308 ......................................... 112 W810310 ......................................... 112 W810312 ......................................... 112 W810314 ......................................... 112 W810316 ......................................... 112 W810318 ......................................... 112 W810319 ......................................... 113 W810320 ......................................... 113 W810321 ......................................... 113 W810323 ......................................... 113 W810324 ......................................... 113 W810325 ......................................... 113 W810326 ......................................... 113 W810327 ......................................... 113 W810600 ......................................... 112 W810602 ......................................... 112 W810603 ......................................... 112 W810604 ......................................... 112 W810606 ......................................... 112 W810608 ......................................... 112 W810609 ......................................... 112 W810610 ......................................... 112 W810908-A ..................................... 116 W810910-A ..................................... 116 W810912-A ..................................... 116 W810914-A ..................................... 116 W810916-A ..................................... 116 W810918-A ..................................... 116 W810924-A ..................................... 116 W810926-A ..................................... 116 W810928-A ..................................... 116 W810929-A ..................................... 116 W810930-A ..................................... 116 W810932-A ..................................... 116 W810934-A ..................................... 116 W820000 ......................................... 120 W820001 ......................................... 120 W820002 ......................................... 120 W820003 ......................................... 120 W820004 ......................................... 120
W820005 ......................................... 120 W820006 ......................................... 120 W820014 ......................................... 120 W820019 ......................................... 116 W820020 ......................................... 116 W820021 ......................................... 116 W820022-A ..................................... 116 W820023 ......................................... 120 W830000 ......................................... 101 W830002 ......................................... 101 W830004 ......................................... 101 W830006 ......................................... 101 W830008 ......................................... 101 W830010 ......................................... 101 W830012 ......................................... 101 W830014 ......................................... 101 W830016 ......................................... 101 W830018 ......................................... 101 W830020 ......................................... 101 W830022 ......................................... 101 W830024 ......................................... 101 W830026 ......................................... 101 W830029 ......................................... 101 W830030 ......................................... 121 W830031 ......................................... 101 W830032 ......................................... 101 W832000 ......................................... 101 W832004 ......................................... 101 W832006 ......................................... 101 W832008 ......................................... 101 W832010 ......................................... 101 W832012 ......................................... 101 W832014 ......................................... 101 W832016 ......................................... 101 W832018 ......................................... 101 W832020 ......................................... 101 W832022 ......................................... 101 W832024 ......................................... 101 W832026 ......................................... 101 W832028 ......................................... 101 W832030 ......................................... 101 W835000 ......................................... 124 W835001 ......................................... 122 W835002 ......................................... 122 W835004 ......................................... 122 W835008 ......................................... 122 W835010 ......................................... 121 W835012 ......................................... 122 W835014 ................................. 105, 122 W835016 ................................. 105, 122 W835022 ................................. 123, 124 W835024 ................................. 123, 124 W835026 ................................. 123, 124 W835028 ................................. 123, 124 W844055 ......................................... 100 W844056 ......................................... 100 W844057 ......................................... 100 W844058 ......................................... 100 W844059 ......................................... 100 W844061 ......................................... 100 W844063 ......................................... 100 W844065 ......................................... 100 W844066 ......................................... 100 W844067 ......................................... 100 W845100 ........................................... 47 W845101 ........................................... 48 W845102 ........................................... 48 W845106 ........................................... 47 W845107 ........................................... 48 W845108 ........................................... 48 W845110 ........................................... 47 W845112 ........................................... 48 W845113 ........................................... 48 W845114 ........................................... 48
1.800.225.1437 (U.S. & Canada only) | +1.856.825.1100 | +1.856.825.1368 (F) | www.wheatonsci.com
)NDEX ¬Numeric W845115 ........................................... 48 W845116 ........................................... 48 W845117 ........................................... 48 W845118 ........................................... 48 W845119 ........................................... 48 W845120 ........................................... 48 W845121 ........................................... 48 W845122 ........................................... 48 W845123 ........................................... 48 W845124 ........................................... 48 W845125 ........................................... 48 W845126 ........................................... 48 W845127 ........................................... 48 W845130 ........................................... 48 W845131 ........................................... 48 W845132 ........................................... 48 W845133 ........................................... 48 W845140 ........................................... 48 W845141 ........................................... 48 W845142 ........................................... 48 W851008 ......................................... 106 W851010 ......................................... 106 W851011 ......................................... 106 W851012 ......................................... 106 W851014 ......................................... 106 W851016 ......................................... 106 W851180-2...................................... 118 W851239 ......................................... 120 W851239-01.................................... 119 W851239-02.................................... 119 W851239-03.................................... 119 W851342 ......................................... 120 W851354 ......................................... 120 W851356 ......................................... 120 W851359 ......................................... 120 W851360 ......................................... 120 W851361 ......................................... 120 W851362 ......................................... 119 W851363 ......................................... 119 W851364 ......................................... 120 W851365 ......................................... 120 W851368 ......................................... 120 W851369 ......................................... 120 W851369 ......................................... 122 W851425 ......................................... 106 W851426 ......................................... 106 W851427 ......................................... 106 W851428 ......................................... 106 W851429 ......................................... 106 W851434 ......................................... 124 W851436 ......................................... 123 W851438 ......................................... 123 W851444 ......................................... 123 W851454 ................................. 123, 124 W852000 ......................................... 104 W852002 ......................................... 104 W852004 ......................................... 104 W852006 ......................................... 104 W852008 ......................................... 104 W852010 ......................................... 104 W852012 ......................................... 104 W852014 ......................................... 104 W852016 ......................................... 104 W852018 ......................................... 104 W852020 ......................................... 104 W853000 ......................................... 104 W853002 ......................................... 104 W853004 ......................................... 104 W853006 ......................................... 104 W853008 ......................................... 104 W853010 ......................................... 104 W853012 ......................................... 104 W853014 ......................................... 104 W853016 ......................................... 104
WHEATON
W853018 ......................................... 104 W853020 ......................................... 104 W855000 ......................................... 105 W855002 ......................................... 105 W855004 ......................................... 105 W855006 ......................................... 105 W855010 ......................................... 105 W855012 ......................................... 105 W855014 ......................................... 105 W855016 ......................................... 105 W855018 ......................................... 105 W855020 ......................................... 105 W855022 ......................................... 105 W855024 ......................................... 105 W860000 ......................................... 105 W860001 ......................................... 105 W860002 ......................................... 105 W860003 ......................................... 105 W860004 ......................................... 105 W860005 ......................................... 105 W860006 ......................................... 105 W860007 ......................................... 105 W860008 ......................................... 105 W860009 ......................................... 105 W860010 ......................................... 105 W860011 ......................................... 105 W860012 ......................................... 105 W860013 ......................................... 105 W860014 ......................................... 105 W860015 ......................................... 105 W860016 ......................................... 105 W860017 ......................................... 105 W860018 ......................................... 105 W860019 ......................................... 105 W860020 ......................................... 105 W860021 ......................................... 105 W860022 ......................................... 105 W860023 ......................................... 105 W860024 ......................................... 105 W860025 ......................................... 105 W860026 ......................................... 105 W860027 ......................................... 105 W860028 ......................................... 105 W860029 ......................................... 105 W860030 ......................................... 105 W860031 ......................................... 105 W860032 ......................................... 105 W860033 ......................................... 105 W860034 ......................................... 105 W860035 ......................................... 105 W860036 ......................................... 105 W860037 ......................................... 105 W860038 ......................................... 105 W860039 ......................................... 105 W860040 ......................................... 105 W860041 ......................................... 105 W860042 ......................................... 105 W860043 ......................................... 105 W860044 ......................................... 105 W860048 ......................................... 106 W860049 ......................................... 106 W860051 ......................................... 106 W860052 ......................................... 106 W860054 ......................................... 106 W860056 ......................................... 106 W860058 ......................................... 106 W860060 ......................................... 106 W860062 ......................................... 106 W860064 ......................................... 106 W860066 ......................................... 106 W860068 ......................................... 105 W860072 ......................................... 105 W860074 ......................................... 105 W860078 ......................................... 105
206
W860080 ......................................... 105 W860086 ......................................... 105 W860088 ......................................... 105 W860090 ......................................... 105
W 900 W900180 ......................................... 136 W900180-6...................................... 136 W900700-A ....................................... 53 W900700-B ....................................... 53 W900700-C ....................................... 53 W900700-D ....................................... 53 W900700-F ........................................ 53 W900700-G ....................................... 53 W900700-J ........................................ 53 W900701-A ....................................... 53 W900701-B ....................................... 53 W900701-C ....................................... 53 W900701-D ....................................... 53 W900701-F ........................................ 53 W900701-G ....................................... 53 W900701-J ........................................ 53 W900702-A ....................................... 53 W900702-B ....................................... 53 W900702-C ....................................... 53 W900702-D ....................................... 53 W900702-F ........................................ 53 W900702-G ....................................... 53 W900702-J ........................................ 53 W900703-A ....................................... 53 W900703-B ....................................... 53 W900703-C ....................................... 53 W900703-D ....................................... 53 W900703-F ........................................ 53 W900703-G ....................................... 53 W900703-J ........................................ 53 W900704 ........................................... 53 W986211NG .................................... 145 W986212NG .................................... 145 W986213NG .................................... 145 W986214NG .................................... 145 W986216NG .................................... 145 W986217NG .................................... 145 W986219NG .................................... 145 W986272NG .................................... 144 W986273NG .................................... 144 W986274NG .................................... 144 W986276NG .................................... 144 W986277NG .................................... 144 W986279NG .................................... 144 W986253NG .................................... 144 W986254NG .................................... 144 W986256NG .................................... 144 W986257NG .................................... 144 W986259NG .................................... 144 W986260NG .................................... 144 W986261NG .................................... 144 W986281NG .................................... 144 W986282NG .................................... 144 W986283NG .................................... 144 W986284NG .................................... 144 W986287NG .................................... 144 W986288NG .................................... 144 W986289NG .................................... 144 W986290NG .................................... 144 W986293NG .................................... 144 W986294NG .................................... 144 W986297NG .................................... 144 W986298NG .................................... 144 W986299NG .................................... 144 W986313NG .................................... 145 W986314NG .................................... 145
W986316NG .................................... 145 W986317NG .................................... 145 W986319NG .................................... 145 W986333NG .................................... 145 W986334NG .................................... 145 W986336NG .................................... 145 W986337NG .................................... 145 W986339NG .................................... 145 W986353NG .................................... 145 W986354NG .................................... 145 W986356NG .................................... 145 W986357NG .................................... 145 W986359NG .................................... 145 W990800 ........................................... 81
WF Series WF030089 ......................................... 80 WF033112 ......................................... 71 WF034088 ......................................... 70 WF034093 ......................................... 70 WF034590 ......................................... 79
WI Series WI050950 ........................................ 123 WI055902 .......................................... 54 WI055974 .......................................... 55 WI055975 .......................................... 55 WI056028 .......................................... 64 WI057606-C-E ................................... 64 WI057606-D-E ................................... 64 WI057606-J-E .................................... 64
WL Series WL052594 ......................................... 56 WL054376 ......................................... 54 WL054377 ......................................... 54 WL055973 ......................................... 56
1.800.225.1437 (U.S. & Canada only) | +1.856.825.1100 | +1.856.825.1368 (F) | www.wheatonsci.com
207
4ECHNICAL¬$ATA
.OTES ___________________________________________________________________________________________________________ ___________________________________________________________________________________________________________ ___________________________________________________________________________________________________________ ___________________________________________________________________________________________________________ ___________________________________________________________________________________________________________ ___________________________________________________________________________________________________________ ___________________________________________________________________________________________________________ ___________________________________________________________________________________________________________ ___________________________________________________________________________________________________________ ___________________________________________________________________________________________________________ ___________________________________________________________________________________________________________ ___________________________________________________________________________________________________________ ___________________________________________________________________________________________________________ ___________________________________________________________________________________________________________ ___________________________________________________________________________________________________________ ___________________________________________________________________________________________________________ ___________________________________________________________________________________________________________ ___________________________________________________________________________________________________________ ___________________________________________________________________________________________________________ ___________________________________________________________________________________________________________ ___________________________________________________________________________________________________________ ___________________________________________________________________________________________________________ ___________________________________________________________________________________________________________ ___________________________________________________________________________________________________________ ___________________________________________________________________________________________________________ ___________________________________________________________________________________________________________ ___________________________________________________________________________________________________________ ___________________________________________________________________________________________________________ ___________________________________________________________________________________________________________ ___________________________________________________________________________________________________________ ___________________________________________________________________________________________________________ ___________________________________________________________________________________________________________ ___________________________________________________________________________________________________________ ___________________________________________________________________________________________________________ ___________________________________________________________________________________________________________ ___________________________________________________________________________________________________________ ___________________________________________________________________________________________________________ ___________________________________________________________________________________________________________ ___________________________________________________________________________________________________________ ___________________________________________________________________________________________________________ ___________________________________________________________________________________________________________ WHEATON
1.800.225.1437 (U.S. & Canada only) | +1.856.825.1100 | +1.856.825.1368 (F) | www.wheatonsci.com
4ECHNICAL¬$ATA .OTES ___________________________________________________________________________________________________________ ___________________________________________________________________________________________________________ ___________________________________________________________________________________________________________ ___________________________________________________________________________________________________________ ___________________________________________________________________________________________________________ ___________________________________________________________________________________________________________ ___________________________________________________________________________________________________________ ___________________________________________________________________________________________________________ ___________________________________________________________________________________________________________ ___________________________________________________________________________________________________________ ___________________________________________________________________________________________________________ ___________________________________________________________________________________________________________ ___________________________________________________________________________________________________________ ___________________________________________________________________________________________________________ ___________________________________________________________________________________________________________ ___________________________________________________________________________________________________________ ___________________________________________________________________________________________________________ ___________________________________________________________________________________________________________ ___________________________________________________________________________________________________________ ___________________________________________________________________________________________________________ ___________________________________________________________________________________________________________ ___________________________________________________________________________________________________________ ___________________________________________________________________________________________________________ ___________________________________________________________________________________________________________ ___________________________________________________________________________________________________________ ___________________________________________________________________________________________________________ ___________________________________________________________________________________________________________ ___________________________________________________________________________________________________________ ___________________________________________________________________________________________________________ ___________________________________________________________________________________________________________ ___________________________________________________________________________________________________________ ___________________________________________________________________________________________________________ ___________________________________________________________________________________________________________ ___________________________________________________________________________________________________________ ___________________________________________________________________________________________________________ ___________________________________________________________________________________________________________ ___________________________________________________________________________________________________________ ___________________________________________________________________________________________________________ ___________________________________________________________________________________________________________ ___________________________________________________________________________________________________________ ___________________________________________________________________________________________________________ WHEATON
1.800.225.1437 (U.S. & Canada only) | +1.856.825.1100 | +1.856.825.1368 (F) | www.wheatonsci.com
208
209
3CI,UTIONS ¬Customized Services
W
hile our heritage is in manufacturing quality products, today we provide services that streamline your operations. It’s easier than ever to get your laboratory products customized the way you need them.
We have integrated a suite of services that you can select from to ensure you obtain the right solution. Each customer is different and each project unique-so each solution is modified to meet individual needs and requirements. Quality products are what we are known for and now with SciLutions®, we bring a whole new level of services to your doorstep.
#USTOMIZATION
2ELIABILITY
When needed, an expert team of corporate engineers, R&D professionals and integration specialists will work collaboratively with you to achieve a solution that meets your needs.
SciLutions is about simplifying your supply chain and optimizing your operations. We can work collaboratively on long term solutions and ensure they are achieved. It’s not about one order or one delivery. It’s about ensuring our products arrive ready to be used, exactly the way you want them.
#OORDINATION We take care of the details. We will handle all of the in-between steps to ensure your process is smooth and efficient. Most of all, we want to meet your particular requirements and specifications from the beginning to the end.
-ANUFACTURING¬0ROCESSES • Extrusion Blow Molding • Injection Blow Molding • Injection Molding • Injection Stretch Blow Molding • Tubular Vial Conversion • Molded Glass
#ONTAINER¬-ATERIALS
#USTOM¬#ONTAINERS • • • • •
Made to order Engineering and design support Custom packaging Custom cut glass tubing and rods Artwork/decal application
• • • • • • •
High Density Polyethylene (HDPE) Low Density Polyethylene (LDPE) Polyethylene Terephthalate (PET) Polypropylene (PP) Cyclo-Olefin Copolymer (COC) Type I Borosilicate Glass Type IIl Soda-Lime Glass
Request a specific packaging method or a completely unique container based on your specific requirements for dimension, shape, and material. Need a custom glass vial? We’ve been producing specialty vials like V Vials® and the E-Z Ex-Traction® high recovery vials for years following the precise instructions of our customers.
"AR¬#ODING • • • •
Uniquely numbered and bar coded to fit your application 100% scannable Wide range of symbologies Packaged and sequentially numbered to your specifications
3YMBOLOGIES • • • • • •
Code 39 Code 128 Interleaved 2 of 5 Linear Bar Codes 2 Dimensional (2D) Data Matrix
-ATERIALS¬
Bar coding can help you identify and track anything in your lab or compound storage facility. Increase the speed of data collection while eliminating errors and ultimately reducing costs. It is imperative that bar codes are read correctly every time, stay adhered to the container, and are durable enough to withstand severe environments.
• Laser: Direct product marked • Ceramic: Imaged ceramic label applied and fired • Photo Imaging: Ultra high-density graphically perfect images • Flexographic: Ink based static printing and label converting • Digital: Full process color 1800 dpi, variable data
We utilize a variety of symbologies and materials to provide unique identification solutions for biotech, pharmaceutical, and compound storage facilities. Bar coding techniques are available from simple pressure sensitive labels to direct marked containers. WHEATON
1.800.225.1437 (U.S. & Canada only) | +1.856.825.1100 | +1.856.825.1368 (F) | www.wheatonsci.com
3CI,UTIONS ¬Customized Services
210
,IST¬OF¬#ERTIlCATIONS • • • • • • • •
#RITICAL¬#LEANING • • • • • •
Certificate of Analysis, TOC Certificate of Analysis, Endotoxin Certificate of Analysis, Particles Certificate of Processing Certificate of Sterility/USP Certification of Compliance Selected Testing by USP Methods Materials Certification
0ACKAGING¬#ONlGURATIONS
Low particulate cleaning Depyrogenation Chemical cleaning for trace analysis Sterilization (E-beam, Gamma Irradiation, Autoclaving) Water for Injection (WFI) and USP rinses Total Organic Carbon (TOC) process
Depending on your application, you may require any number of “levels of clean.” To ensure we can accommodate any request, we employ the most sophisticated methods to remove trace organics, trace inorganics, volatile organics, and organic carbon residues.
• Individual or multi-unit cleanroom bags • Single or double bagged • Autoclaved bagging in cleanroom bags (closures only) • Autoclaved bagging (single, double, or triple bagged)
We use USP purified water, HEPA filtering, and package items in certified class 100/10 cleanrooms. In addition, we can deliver our glass containers and accessories with endotoxin levels of less than 0.06 EU/mL with full documentation and certification.
3URFACE¬4REATMENT !PPLICATIONS • Trace organic analysis • Storage of materials prone to adhering to glass • Extraction glassware
Surface treatment refers to a process by which the inside of a container is deactivated via silanization or siliconization. The coating provides a protective barrier between the contents and the glass, eliminating active sites on the glass that could potentially react with its contents. We treat vials and vial inserts using vapor phase deposition for silanization and siliconization coating to lubricate and protect against alkalinization. This service is ideal for serum vials and pH sensitive storage. Certificates of conformance are always available based on customer needs and requirements.
4ARING • Pre-weighed containers • Traceability documentation • Accuracy to ±0.2 milligrams
Part of the SciLutions® program is to provide you with pre-weighed containers. Taring ensures that the amount of material in the container can be accurately measured at any given time. Wheaton offers this service, eliminating the extra step of pre-weighing in the lab. Weights for each container are recorded to the accuracy of ±0.2 milligrams. The results are summarized in the form of a spreadsheet allowing for each and every container to be fully traceable.
WHEATON
1.800.225.1437 (U.S. & Canada only) | +1.856.825.1100 | +1.856.825.1368 (F) | www.wheatonsci.com
211
4RADEMARKS The following are U.S. registered trademarks owned by WHEATON Industries Inc.:
The following are trademarks owned by WHEATON Industries Inc.:
Biopro BioStir C-Tubes CART Cell Optimizer System
ABC Vial Bioware Control Tower E-Z Crimper E-Z Decapper E-Z Seal I-Loc LVI
Celstir Clear-Seal Crimpmaster Cryule Dura-Grind E-Z Ex-Traction E-Z Sampler E-Z Vial Grab Sampler Magna Flex MantaRay Micro-Stir Mini-File M-T Vial File Omnispense Omni-Vial Safe-Grind Sampule SciLutions Shorty Vial The Wheaton Connection Uni-Dose Unispense V Vial Vacule Vial File Wheaton Dry Seal Wheaton Micro Kit
Computer software Heavy duty magnetic stirrer Disposable culture tubes Computer Aided Roller Technology Large scale cell production system for the culture of mammalian or insect cells Suspension culture flask ST Joint that seals without grease Crimping station Cryogenic ampule Stainless steel tissue grinder High recovery vials Water sampler Large opening chromatography vial Water sampler Microcarrier flask Single use cell culture vessel Slow speed stirrer for microcarrier flask Mini filing system for sample and micro product vials Mini filing system for vials Automatic dispenser for low-medium viscosity fluids Disposable scintillation vial Plastic coated tissue grinder Disposable 6 mL vial Value added services Vial with low profile Screw thread connection Disposable container for individual medication Automatic Dispenser Vial with cone shaped interior Cryogenic ampule Container with alpha-numeric index for filing vials Desiccator that seals without grease Micro glassware with Wheaton Connection Wheaton Industries Stylized W
Lab 45 Lab File Mini Pilot Plant NextGen Overdrive Proven Tools R 2P Valu-Bulk Valumetric Wheaton Bench Top Roller Wheaton Media Square Wheaton Semi-Micro Kit Wheaton S/T
Screw top vials for chromatography analysis Assorted biotechnology products Digital control system Ergonomic designed hand crimper Ergonomic designed hand decapper Aluminum seals with a larger target diameter Closure for diagnostic applications Chromatography vial with a sealed-in limited volume insert Borosilicate media bottles with 45 mm screw thread finish Carton with drawers for filing Spinner flask system V vials with a non-ground base Large volume cell culture system Roller culture apparatus Large quantity of containers packed economically Graduated bottles Bench top roller PETE Square media bottles Semi-micro glassware with Wheaton Connection Bottle with screw thread finish
The following trademarks are owned by third parties and may be used in Wheaton Industries Inc. publications: Acura® Acurex® Calibra® Calibrex® Dosys™ Ecostep™ Excel® F217® Gold Band® Gore-Tex® JusTip™ Microlink® Microsep® Microsoft® Microtiter® Multi-Tier®* Poly Crimp®* Poly Seal® Pyrex® Profiller™ Rulon® Qualitips™ Solid Calibration™ Snap Seal®* Snap Top Cap® Step-Pette® Stomacher® SureSeal® Stepper™ Teflon® Topas® TPX® Tygon® Viton® Waters® Windows® WISP® Zitex®
Socorex ISBA Socorex ISBA Socorex ISBA Socorex ISBA Socorex ISBA Socorex ISBA Microsoft Corporation Tri-Seal International Inc. Alcan W.L. Gore & Associates Socorex ISBA St. Gobain St. Gobain Microsoft Corporation Thermo Scientific J.G. Finneran Associates, Inc. J.G. Finneran Associates, Inc. Berry Plastics Corporation Corning Incorporated Socorex ISBA St. Gobain Socorex ISBA Socorex ISBA J.G. Finneran Associates Inc. J.G. Finneran Associates, Inc. Socorex ISBA Seward Limited, Worthing, UK J.S. Plastics Inc. Socorex ISBA E.I. duPont de Nemours Ticona GmbH Imperial Chemical Industries, Ltd. Norton Company DuPont Dow Elastomers, LLC Waters Investment Limited Microsoft Corporation Millipore Corporation Norton Company
* Patented
WHEATON
1.800.225.1437 (U.S. & Canada only) | +1.856.825.1100 | +1.856.825.1368 (F) | www.wheatonsci.com
7HEATON¬)NDUSTRIES¬#OMMITMENT 7HEATON¬)NDUSTRIES¬#OMMITMENT¬TOx Our Customers, Associates and Community Wheaton Industries is committed to excellence in Environment, Health, and Safety (EHS). As a socially responsible corporate citizen, we will conduct our business in accordance with all applicable legal standards and strive to meet the highest ethical standards. We shall serve to promote a safe and healthy environment, while seeking to improve the quality of life for our associates, contractors, visitors, and the community. This commitment is supported at all levels of the organization and is the individual and collective responsibility of all Wheaton associates.
Through our EHS management system and continuous improvement initiatives we shall: • Promote a positive “Safety First” lifestyle both at work and at home. • Provide education and training to ensure that each associate is experienced and competent to perform their duties safely. • Apply our EHS policies and procedures to all contractors, vendors, and suppliers. • Identify and eliminate foreseeable workplace hazards in our pursuit of zero injuries. • Meet or exceed all EHS regulatory requirements and applicable laws. • Reduce environmental impacts and conserve natural resources. • Integrate EHS as an essential part of our every day business.
'OING¬'REEN • Wheaton Industries is taking initiatives towards protecting our environment. As a company, we have implemented several programs to remove hazardous material from our warehouses and manufacturing plants, reduce our waste, reduce our pollution output, and recycle our aluminum and plastics. • Wheaton Industries Inc. is committed to supporting the WEEE and RoHS Directives. For specific information regarding our policies, please visit our web site, www.wheatonsci.com.
As a means of meeting or exceeding our business goals, we focus our Continuous Improvement resources on initiatives that provide maximum value for all stakeholders. Additionally, we seek to embed a Continuous Improvement mindset in our culture and personal behaviors through extensive participation of our associates, use of proven training, tools and techniques, and the celebration of our successes.
We will supply products and services that consistently meet or exceed our customers’ expectations and requirements, on time, every time. Through continuous improvements, communications, and measurable quality objectives we will continuously strive for excellence in everything we do.
01 & 14 90
001 •
Registered
OH
SA
01
• ISO
Through the personal involvement of all our associates, we will pursue these commitments to achieve profitable growth for our stakeholders.
S 180
WHEATON
1.800.225.1437 (U.S. & Canada only) | +1.856.825.1100 | +1.856.825.1368 (F) | www.wheatonsci.com
212
213
/RDERINGÂŹ)NFORMATION /RDERINGÂŹ
7ARRANTIES
We maintain a worldwide network of distributors through which you can purchase the products shown in this catalog. For our complete distributor list, or for a distributor near you, please visit our website at www.wheatonsci.com. Our suggested list prices for our products are listed on our website in U.S. Dollars. When placing an order, please be ready to provide the Wheaton catalog number and product description to the distributorâ&#x20AC;&#x2122;s Customer Service Representative.
All goods and materials shall conform to Wheaton Industries Inc. speciďŹ cations at the time of shipment from our plant. At our option, we will either correct the non-conforming condition or replace any nonconforming goods or materials or issue you a credit in the amount of the purchase price paid and received for such goods. You must notify us of any claim of nonconformity within ten (10) days after you discover any such defect. Before any claim of nonconformity will be honored, we must be given an opportunity, after receiving notice of your claim, to inspect the goods or materials claimed to be nonconforming. In no event shall any claim for a breach of warranty be made later than one (1) year after the date of delivery of the goods and materials.
0RODUCTÂŹ)NFORMATIONÂŹANDÂŹ3PECIlCATIONS The product information and speciďŹ cations shown in this catalog were in effect at the time of publication, but are subject to change without notice. For current information please visit our website or contact our customer service department with requests for products which differ from those shown in this catalog. We have a wide range of manufacturing capabilities, and we would be glad to discuss a solution for your business need.
WE MAKE NO OTHER EXPRESS OR IMPLIED WARRANTY, STATUTORY OR OTHERWISE, CONCERNING MATERIALS OR GOODS SUPPLIED, INCLUDING WITHOUT LIMITATION, ANY WARRANTY OF FITNESS FOR A PARTICULAR PURPOSE OR ANY WARRANTY OF MERCHANTABILITY. THE WARRANTIES GIVEN HEREUNDER ARE EXCLUSIVELY IN LIEU OF ALL OTHER WARRANTIES EXPRESS OR IMPLIED.
WE SHALL NOT BE LIABLE FOR
NOTE: WHEATON INDUSTRIES INC. RESERVES THE RIGHT TO MAKE SPECIFICATION CHANGES TO OUR CATALOG PRODUCTS WITHOUT NOTICE. AS A RESULT OF CONTINUAL IMPROVEMENTS TO THE DESIGN OF OUR PRODUCTS OR MANUFACTURING TECHNIQUES,
CONSEQUENTIAL, SPECIAL OR INCIDENTAL DAMAGES.
PURCHASERS MAY NOTICE THAT ITEMS ORDERED AND RECEIVED MAY DIFFER FROM THE
SPECIFICATIONS PROVIDED BY YOU. TECHNICAL ADVICE IS FURNISHED AS AN
DESCRIPTION AND/OR PHOTOGRAPH OF THAT PRODUCT APPEARING IN THIS CATALOG.
WE MAKE NO WARRANTY, EXPRESS OR IMPLIED, WITH RESPECT TO DEFECTS IN OR NONCONFORMITY OF GOODS OR MATERIALS RESULTING FROM DESIGNS OR ACCOMMODATION TO YOU.
WE ASSUME NO LIABILITY FOR TECHNICAL ADVICE AND YOU
ACCEPT SUCH ADVICE AT YOUR SOLE RISK.
5 3 ÂŹ$EPARTMENTÂŹOFÂŹ#OMMERCE We are prohibited from shipping any of our products to purchasers in countries listed on the United States embargo list. For a list of these countries please refer to the U.S. Department of Commerce website.
Copyright 2008 Wheaton Industries Inc. All rights reserved.
%XCHANGESÂŹORÂŹ2ETURNS All requests for exchanges or returns are to be made within 30 days of receipt of shipment and should be directed to the distributor through which you placed your order. All exchanges or returns must have prior approval and be sent back in their original packaging. Returned products will not be accepted without prior approval, an authorized RGA number and original packaging. With respect to returns due to incorrect orders, freight charges must be prepaid and a 25% restocking fee will be assessed against the invoiced amount. NOTE: ROLLER CULTURE APPARATUS AND
BIOREACTORS ARE MADE TO ORDER AND MAY NOT BE RETURNED.
$AMAGEÂŹINÂŹ3HIPMENT All shipments should be opened immediately upon receipt for inspection for concealed damages. If concealed damage is discovered, hold the shipping container and packaging materials and immediately request that the carrier make an inspection. If you ďŹ nd damage or shortages, do not accept the shipment until the carrier makes a notation on your delivery receipt or freight bill. All requests for inspection must be made to the carrier within 15 days of receipt of shipment. All claims for damages must be made against the carrier.
WHEATON
1.800.225.1437 (U.S. & Canada only) | +1.856.825.1100 | +1.856.825.1368 (F) | www.wheatonsci.com
#HEMICAL¬#OMPATIBILITY Container Materials Chemical
COC
Glass HDPE LDPE
PET
Cap Liner Materials PP
Al Foil LDPE
PolyVinyl
Cap Materials
SBR Silicone Teflon
PBT Phenolic PP
Urea
Septa and Stopper Materials Butyl Natural Rubber EPDM Rubber Silicone Teflon Viton
acetic acid, glacial
A
A
A
B
A
A
A
B
B
C
B
A
C
A
A
D
B
B
B
B
A
A
acetone
A
A
D
D
C
B
A
D
D
D
B
A
D
A
B
A
B
A
B
B
A
D
acetonitrile
—
A
A
A
B
A
A
A
D
B
D
A
—
A
A
—
D
B
D
D
A
D
acrylonitrile
—
A
A
A
B
B
B
A
D
C
D
A
—
D
B
—
D
A
D
D
A
D
ammonium sulfide
—
A
A
A
—
A
D
A
A
B
A
A
—
A
A
C
A
A
A
A
A
C
benzene
D
A
D
D
C
D
B
D
D
D
D
A
A
A
D
A
D
D
D
D
A
A
bleach
—
A
A
B
C
B
D
B
A
D
B
A
C
D
B
—
A
A
D
B
A
A
boric acid
—
A
A
A
A
A
D
A
A
A
A
A
A
B
A
—
A
A
A
A
A
A
carbonic acid
—
A
A
A
—
A
B
A
A
B
A
A
—
—
A
—
A
A
A
A
A
A
chlorobenzene
D
A
C
D
B
C
A
D
D
D
D
A
B
A
C
B
D
D
D
D
A
A
chloroform
D
A
C
C
D
D
A
C
D
D
D
A
D
A
D
A
D
D
D
D
A
A
dichloromethane
D
A
C
D
D
C
D
D
D
D
D
A
D
C
C
B
D
D
D
D
A
B
diethylamine
—
A
C
D
—
B
A
D
D
B
B
A
—
—
B
—
B
B
B
B
A
C
dimethyl formamide
—
A
A
A
B
A
A
A
D
D
B
A
—
A
A
—
D
B
D
B
A
D
dimethyl sulfoxide (DMSO)
—
A
A
A
B
A
A
A
D
D
D
A
—
—
A
—
D
A
D
D
A
D
dioxane
—
A
B
B
A
D
D
B
D
D
D
A
B
A
D
—
B
B
D
D
A
D
ether
—
A
C
D
A
D
B
D
D
D
D
A
—
B
D
B
D
C
D
D
A
C
ethyl acetate
C
A
B
B
B
C
B
B
D
D
C
A
C
A
C
B
C
C
D
C
A
D
ethyl alcohol
A
A
A
A
A
A
B
A
B
A
B
A
A
B
A
A
A
A
A
B
A
A
ethylene glycol
A
A
A
A
A
A
B
A
A
A
A
A
A
B
A
B
A
A
A
A
A
A
formaldehyde
—
A
A
A
B
A
A
A
C
B
B
A
—
B
A
A
A
A
C
B
A
C
formic acid 50%
A
A
A
B
—
A
C
B
B
B
C
A
A
C
A
D
A
A
B
C
A
C
gasoline
D
A
C
D
B
C
A
D
D
D
D
A
A
B
C
A
D
D
D
D
A
A
glycerine
A
A
A
A
—
A
A
A
C
A
B
A
—
A
A
—
A
A
A
B
A
A
heptane
D
A
C
D
B
C
A
D
C
D
D
A
A
A
C
A
D
D
D
D
A
A
hexane
D
A
B
D
C
B
A
D
D
D
D
A
A
B
B
—
D
D
D
D
A
A
hydrochloric acid (HCL) 50%
A
A
A
A
B
A
D
A
B
D
D
A
C
A
A
D
A
D
D
D
A
A
hydrofluoric acid (HF) 50%
D
D
A
A
C
A
D
A
C
D
D
A
C
D
A
D
C
D
C
D
A
A
hydrogen peroxide 50%
—
B
A
A
B
A
A
A
C
C
B
A
B
D
A
D
B
B
B
B
A
A
iodine
B
A
C
D
A
C
A
D
C
B
A
A
—
—
C
—
B
B
D
A
A
A
isopropyl alcohol
A
A
A
A
A
A
A
A
B
B
A
A
A
A
A
—
A
A
A
A
A
A
methyl alcohol
A
A
A
A
B
A
A
A
C
A
A
A
B
B
A
A
A
A
A
A
A
D
methyl ethyl ketone (MEK)
—
A
D
D
B
B
A
D
D
D
D
A
C
A
B
—
A
B
D
D
A
D
methylene chloride
D
A
C
D
D
B
D
D
D
D
D
A
D
C
B
B
D
D
D
D
A
B
nitric acid 50%
B
A
C
B
C
C
D
B
B
D
D
A
C
B
C
D
C
D
C
D
A
B
pentane
D
A
C
C
—
D
A
C
D
D
D
A
—
—
D
—
D
D
D
D
A
A
perchloric acid 50%
—
B
B
B
B
B
D
B
D
D
D
B
—
—
B
—
B
B
D
D
B
A
phenol 50%
B
A
D
D
D
D
A
D
C
D
D
A
D
A
D
—
D
C
D
D
A
A
phosphoric acid 50%
A
A
A
A
B
A
B
A
B
D
D
A
B
B
A
D
B
B
D
D
A
A
picric acid
—
A
D
D
B
D
A
D
D
B
D
A
—
A
D
D
B
B
B
D
A
A
potassium hydroxide
A
D
A
A
D
A
D
A
A
B
C
A
C
D
A
—
A
A
B
C
A
B
sodium hydroxide 50%
B
D
A
B
D
A
D
B
C
A
B
A
C
D
A
C
A
A
A
B
A
B
sodium peroxide
—
A
B
B
—
B
C
B
A
B
D
A
—
B
B
D
A
A
B
D
A
A
sodium thiosulfate
—
A
A
A
B
A
A
A
A
B
A
A
—
A
A
B
A
A
B
A
A
A
sulfuric acid 50%
A
A
A
A
B
B
C
A
C
D
D
A
B
C
B
D
D
C
D
D
A
A
tetrahydrofuran (THF)
—
A
C
C
A
B
A
C
D
D
D
A
D
A
B
—
C
C
D
D
A
D
toluene
D
A
C
C
C
C
A
C
C
D
D
A
D
A
C
—
D
D
D
D
A
B
trifluroacetic acid (TFA) 50%
—
A
A
A
B
A
—
A
A
—
D
—
—
—
A
—
—
A
—
D
—
—
vegetable oil
—
A
B
B
A
A
A
B
A
D
A
A
A
A
A
A
C
C
D
A
A
A
xylene
D
A
C
D
C
D
A
D
D
D
D
A
C
A
D
B
D
D
D
D
A
A
(Tests conducted at room temp) COC ...cyclic olefin copolymer SBR ...styrene butadiene rubber
A - Resistant
HDPE ... high density polyethylene Teflon ... (tetrafluoroethylene)
B - Limited Resistance LDPE ... low density polyethylene PBT ... polybutylene terephthalate
C - Poor Resistance PET ... poyethylene terephthalate Urea ... urea
214
D - Not Resistant
PP ... polypropylene EPDM ... ethylene propylene diene monomer
— - Unknown Al Foil ... aluminum foil Viton ... (fluoroelastomer)
Although the information in this chart was acquired from reputable sources, it should only be used as a guide in selecting a container and closure system. Because so many factors can affect the chemical resistance of a material, in-house testing under actual conditions should be performed. Wheaton Science Products accepts no responsibility for the accuracy of this data or for any consequences resulting from its use.
WHEATON
1.800.225.1437 (U.S. & Canada only) | +1.856.825.1100 | +1.856.825.1368 (F) | www.wheatonsci.com
9833 WHT back cov.:Layout 1
1/16/08
9:22 AM
Page 1
1501 North 10th Street, Millville, NJ 08332-2038 1.800.225.1437 (U.S. & Canada) ■ 1.856.825.1368 (F)
1501 North 10th Street, Millville, NJ 08332-2038 USA +1.856.825.1100 ■ +1.856.825.1368 (F) www.wheatonsci.com (Worldwide)
Distributed by:
©Copyright, Wheaton Industries, Inc., 2007
Printed in USA
8000 1/08