At the heart of Roman is the desire to be the best. It is Roman’s vision to lead and innovate in the Showering industry.
To design and manufacture top quality inspirational showering solutions, which offers choice for all markets.
To expertly manufacture our products in Britain, so they are designed and built to last and offer a lifetime of effortless showering for all. It is our aim to give all our customers exceptional value and service; this ethos runs throughout the culture of the business and cannot be imitated.
INTRODUCTION
Roman has been designing and manufacturing beautiful showering environments for over 36 years and all products are proudly made in Britain. Roman’s core values are excellence in product quality, unrivalled customer service and a meaningful lifetime guarantee.
Roman is active in over 60 markets worldwide and the international activity is firmly focused on international hotel design. The Roman design team is constantly pushing the boundaries of our design and manufacturing capability. The Roman Colours range showcases Roman’s design and manufacturing capability in a way that no range has before. Design in the hotel sector has demanded new finishes and metal colour options to be developed and the Colours range brings this development and expertise into the retail market for the first time. The mechanisms within Colours elevate showering to a new level and achieve the genuine soft close experience for the very first time, leading the way in superior bathroom design.
Whilst the obvious attraction of the Colours range is the ability to match and suite the key 11 colours currently active within International
bathroom design, the technical developments of the hinges and the sliding system are ground breaking. The hinged door options feature
beautifully styled hinges but inside is the key. The hinges have a hydraulic system operating which closes the door at speed but then the final closing is slow and soft as the 10mm glass kisses the colourless seals. The sliding door glides smoothly but as the door enters the final closing, or opening, the wheels engage a concealed soft close spring system which slows the door and elegantly glides it through the final section of its journey. In addition, the sliding door top rail is shrouded by a rolled stainless-steel section which is an exact colour match for all of the brass elements in the product. The aluminium wall profiles on all products feature Roman’s hydro-active tape system which completely eliminates any requirement for any vertical silicone sealing.
Image shown: 1600 x 800mm Polished Brass hinged door with two in-line panels and side panel in a right hand corner fitting.
FINISHING TOUCHES
Colours have become increasingly important in high end bathroom design over recent years. The Roman Colours range is a major breakthrough for shower enclosure design and offers co-ordination to 11 of the most popular options at the high end of the bathroom market. Our specialist processes within the chrome plating production flow allows Roman to precisely co-ordinate all of the brass parts in the Colours range to accurately match metals across the bathroom.
Polished Chrome Brushed Chrome
Polished Nickel Brushed Nickel
Polished Gold Optic Brushed Gold Optic
Polished Brass Brushed Brass
Polished Black Chrome Brushed Black Chrome
Matt White
SLIDING DOOR
1400 x 900mm
ALCOVE FITTING WITH POLISHED BLACK FINISH
Image Shows Left Hand Opening
The Colours sliding door system offers a genuine soft close system for the first time in shower enclosures. The secret lies hidden behind a plate inside the top rail.
A heavy gauge spring system is activated when the 10mm thick door is moving and the last 50mm of door movement, opening or closing, is taken over by the soft close system and it slowly, quietly and elegantly takes the door to its destination. The system itself is tested over 20,000 cycles and will control the door regardless of the speed you open or close it at.
Available in all colours.
SLIDING DOOR
1700 x 800mm
ALCOVE FITTING WITH BRUSHED NICKEL FINISH
Image Shows Left Hand Opening
Another design breakthrough offered by the sliding door in the Colours range is the finish of the top rail. Our aluminium extrusions are precisely designed and manufactured to create wall fixing systems and sliding rails. Whilst Roman can colour match these extrusions to co-ordinate with the brass parts, the grain of aluminium will always give it a visual difference to a chrome plated finish. The Colours top rail is covered by a stainless-steel shroud and due to the nature of stainless steel, it can be precisely co-ordinated to match the chromed brass finishes so the eyeline picks up co-ordinated finishes across all key parts on these meticulously designed enclosures.
Available in all colours.
1700 x 800mm
SLIDING DOOR
CORNER FITTING WITH MATT WHITE FINISH
Image Shows Right Hand Fitting
The Colours sliding door is available in all key sizes – and has a straightforward bespoke service available for non-standard sizes. Side panels are available in all key sizes and via the bespoke service.
The aluminium wall profiles within the Colours range feature Roman’s unique silicone free wall fixing system – which utilises hydro active tapes which give a water seal to the products from inside the profile, therefore the products are easy to maintain, but moreover, always maintain the look of the colour finish chosen without it being covered in silicone during installation.
Available in all colours.
Sizes available:
ALCOVE FITTING CORNER FITTING 1200mm, 1400mm, 1500mm and 1700mm 1200 x 800mm, 1200 x 900mm, 1400 x 800mm, 1400 x 900mm, 1500 x 800mm, 1500 x 900mm, 1700 x 800mm, 1700 x 900mm
HINGED DOOR WITH IN-LINE PANEL
1600 x 800mm
ALCOVE FITTING WITH BRUSHED CHROME FINISH
Image Shows Left Hand Fitting
The Colours hinged door options all feature another major technical advance from the Roman design team. From any point of release, the doors will close themselves quickly, until the final closing operation. The elegant hinges hide inside an advanced hydraulic soft close system. At this point the hydraulic hinge takes over and closes the door until the 10mm glass kisses the colourless seals. The hinges are equally effective on any size of door and they are designed for outward opening only.
Available in all colours except Matt White.
HINGED DOOR WITH IN-LINE PANEL & SIDE PANEL
1200 x 900mm
CORNER FITTING WITH POLISHED NICKEL FINISH
Image Shows Right Hand Fitting
The hinged doors are available in a choice of 10 metal finishes. The aluminium wall joints also feature the Roman silicone free wall fixing system which eliminates the need for any visual silicone as the products are sealed for water integrity from the inside. Every option comes with the intricate Roman dam system which blends into the wall profile and below the door to ensure complete water integrity for these frameless enclosures.
Available in all colours except Matt White.
HINGED DOOR WITH IN-LINE PANEL
1200 x 900mm
ALCOVE FITTING WITH BRUSHED BLACK FINISH
Image Shows Right Hand Fitting
There are a vast array of design options and configurations within the Colours hinged door range. Whilst alcove options are the most frequently designed, the range also offers huge versatility for in-line and corner option and the design process has eliminated the need for bracing bars in such configurations. The brass corner joints and wall fixing joints are all the product needs for being secured in place for their lifetime.
Available in all colours except Matt White.
Sizes available:
ALCOVE FITTING CORNER FITTING
HINGED DOOR
WITH TWO IN-LINE PANELS & SIDE PANEL
1600 x 800mm
CORNER FITTING WITH POLISHED GOLD OPTIC FINISH
Image Shows Left Hand Fitting
Some larger design configurations may wish to centralise the door or simply move it away from wall fixing.
The Colours range has integrated such glass to glass fixing options into their range – both for corner and alcove configurations. The Roman dam system adapts to link the wall fixing beneath the glass and door to give
complete water integrity. Glass to glass corner joints once again negate any requirement for silicone sealant as a specialist invisible seal is supplied with the side panel and is activated during installation to create an invisible glass to glass seal.
Available in all colours except Matt White.
Sizes available:
ALCOVE FITTING CORNER FITTING 1200mm, 1400mm and 1600mm 1200 x 800mm, 1200 x 900mm, 1400 x 800mm, 1400 x 900mm, 1600 x 800mm, 1600 x 900mm
WETROOM PANEL WITH PIVOTING DEFLECTOR PANEL
1400 x 900mm (Enclosure Size)
ALCOVE FITTING WITH MATT WHITE FINISH
Image Shows Right Hand Fitting with 1000mm Wetroom Panel
Matt White is fast becoming one of the most popular high-end bathroom finishes internationally – and is the 11th colour option available for the Colours sliding door and wetroom panel options. The Colours range offers design freedom with a large array of standard sizes and an extremely easy to use bespoke service. The deflector panels operate through 180 degrees and close discreetly inside the enclosure when not in use. However, when in use they significantly restrict water spray during showering and allow the freedom of the wet room look without drenching the bathroom during use.
Available in all colours.
WETROOM PANEL WITH PIVOTING DEFLECTOR PANEL
1400 x 900mm (Enclosure Size)
CORNER FITTING WITH BRUSHED GOLD OPTIC FINISH
Image Shows Left Hand Fitting with 1000mm and 900mm Wetroom Panel
There are a large number of side panel options to complete the design – with precisely colour matched bracing systems to complete the look and give complete rigidity to the largest of bathroom designs. As with the rest of the Colours range, all of the wall profile systems feature the Roman silicone free fixing system which allows the product to seal from the inside and avoids any silicone denigrating the exterior finish.
Extensive development time and great precision has gone in to allow the Colours range to offer 11 colour matched metal finishes. The chrome plating process effectively matches each metal finish via a precise pantone colour reference. Aluminium anodising is a totally different process and after the metal has been extruded and polished, it then goes through a series of large tanks which dye it to the point of colour match under time and chemical control and then seal it to give colour continuity and longevity. The anodising process also protects and toughens the aluminium for its life in the bathroom. Care should still be taken to adhere to cleaning recommendations.
The Colours range is very literally based upon 11 colour finishes. Standard glass, especially at 10mm thickness, has a naturally green tint to it. Roman have used only Low Iron glass for the Colours range so nothing distracts from the colour finished design. Low Iron glass effectively has had the green tint removed and is optically clear – even side on. Likewise, all of the seals used within the Colours range are also optically clear and will remain so during their lifetime if they are regularly cleaned.
MADE IN BRITAIN
ENVIRONMENTAL OBJECTIVES
Roman has a huge commitment throughout the business to environmental targets, recycling, sustainable materials and sustainable business practices. As British manufacturers, Roman are increasingly focussed on environmental credentials and have a strong focus on the Circular Economy - with the ultimate aim of becoming carbon neutral. Every piece of aluminium is already 100% recycled before use, and all packaging is 100% recyclable before and after use. The benefi of working with solid surface material is any waste can be reground into the original material.
Roman has three core environmental objectives:
Reduce energy consumed as a direct proportion of business activity.
Increase the proportion of recycled waste.
Reduce and if possible eliminate any harmful emissions, discharges or pollutants generated by the business activity.
Roman is constantly working with our suppliers to maximise the use of recycled materials. The principles of the circular
are embedded in all of our design and purchasing policies and plans. All Roman’s aluminium and
ANTI-SLIP TRAYS
GLASS PROTECTION
All Roman’s Enclosures and Bath Screens are pre-coated with Roman Ultra Care, our own unique glass protection system. Pre-coated glass protection systems will always diminish in their effectiveness over time, depending on how often the shower is used and how often it is cleaned. Unlike other systems, Roman Ultra Care in a bottle can be used in tandem with the pre-coat to build up the effectiveness and make it stronger the more you clean. Roman Ultra Care is an award winning bathroom protector and has a 15 year track record for successfully protecting Roman’s extensive product range. When applied to the glass of an Enclosure or Bath Screen it creates a chemical barrier which provides protection against the build-up of grime, limescale and stains. The protective barrier means water glides off the glass with ease. This results in the protected surface remaining easy to clean by simply applying a mild detergent and wiping with a damp cloth or using a Roman Shower Blade. By topping
clean, you can significantly reduce the amount of time required to clean your enclosure and bathroom surfaces. Most importantly, you can considerably prolong the life of your Roman product and at the same time do your bit for the environment by eliminating the use of harsh and damaging cleaning products.
Anti-Slip Tray
CONSUMER GUIDE
Roman shower enclosures have been tested and fully conform to the scope and relevant characteristics of BS EN14428:2015 (Shower Enclosures Functional requirements and test methods), to meet the requirements of the mandate given under the EU Construction Product Directive (89/106/EEC).
As a result of full compliance to the directive and harmonized standard; Roman shower enclosures carry the ‘CE’ mark and are accompanied by declaration of performance. (Available to view on www.roman-showers.com)
The CE marking indicates Roman shower enclosures conform to all essential requirements of European health and safety and environmental protection legislation. The conformity is mandatory, and allows Roman products to be legally placed on the market anywhere in the European Economic Area.
As per government guidelines Roman are actively preparing to apply the new UKCA Mark for any newly manufactured products from the 1st January 2021.
UKCA (UK Conformity Assessed) is a new UK product Mark that will be used for goods being placed on the market in Great Britain (England, Wales and Scotland). It covers most goods which previously required the CE Marking.
Please note: this will only apply to any new products manufactured from 1st January 2021, any products held in stock will still be able to display the CE Mark. Additionally all Roman trays fully conform to EN14527:2016.
LIFETIME GUARANTEE
Roman Ltd. guarantees all Shower Enclosures, Bath Screens and Roman Solid Surface Trays against faulty materials or manufacture for LIFE, provided they have been installed, used and maintained in accordance with our instructions.
All Roman product guarantees must be completed and returned within 60 days of purchase to validate the relevant guarantee. Failure to meet this deadline will result in a statutory year guarantee on all products.
Should a claim arise, Roman Ltd. Customer Relations will investigate the issue. As part of this investigation we request that the following conditions be satisfied:
1. Proof of purchase at the time of the claim.
2. The guarantee applies to the original purchaser only and is non transferable.
3. The product has been fitted/installed in accordance with Roman Ltd. xing instructions, local bylaws and general good plumbing practice
4. The product has been maintained and cared for in accordance with our instructions (including regular and appropriate cleaning).
If in our opinion the product has been modified, misused, neglected, wilfully or accidentally damaged, we can accept no responsibility for failure.
Roman Ltd. or its representatives must be given the opportunity to inspect the product in the installed condition. Callouts may be chargeable depending upon circumstances.
Should any products included in the Lifetime guarantee be used for Commercial use i.e. leisure clubs, schools, hospitals, student accommodation, hotels or residential homes, only a year guarantee will be applicable.
If in our opinion the product fails due to faulty materials or manufacture and that the conditions above have been met, Roman Ltd. will arrange for a specialist Roman Technical Sales Representative to repair or replace that item at our option.
Roman Ltd. believes in continuous improvement. in our opinion the product has failed under the terms of the Guarantee and a replacement is offered but identical goods are no longer available, Roman Ltd. will endeavour to replace it with our nearest equivalent product. For countries outside of the UK and Republic of Ireland, where a product has failed due to faulty materials or manufacture, a replacement product or product part will be offered only.
Should Roman Ltd. carry out work as a result of a claim but subsequently is revealed that the product has been abused or improperly installed, we reserve the right to charge the customer for the expense incurred.
The liability of Roman Ltd. is limited to the product supplied by Roman Ltd. and does not extend to consequential loss or damage arising from the defective product.
Non glass or metallic parts (e.g. seals) are subject to normal wear and tear through usage and are therefore covered on all products for year from installation.
Roman Ultra Care pre-coat is not covered by this guarantee and must be maintained by applying Ultra Care from a bottle on an ongoing basis.
Commercial projects with specific guarantee requirements can be subject to negotiation and agreement on a project by project basis. Any such agreements must be confirmed in writing prior to product supply or commencement in project works.
This guarantee does not affect your statutory rights. This guarantee is wholly applicable in the U.K. and Republic of Ireland – export conditions as indicated
Roman Ltd, Whitworth Avenue, Aycliffe Business Park, County Durham, DL5 6YN Tel: 01325 311318 Fax: 01325 319889 www.roman-showers.com
HOW TO ORDER
The Roman Colours range offers huge a choice of sizes and colours – but ordering could not be simpler. The Roman Product Builder completely eliminates complicated codes. Simply visit your nearest Roman Colours displaying retailer and their design team will be able to design and specify your product to your requirement; give you a quotation; and place your order.
HINGED DOOR WITH TWO IN-LINE PANELS SIZE:
WETROOM PANEL SIZE: 800mm 900mm 1000mm 1200mm
Deflector Panel: Yes No
BATH SCREEN SIZE: 1600mm (Height) x 900mm (Width)
HARDWARE COLOUR: (Please Note: Matt White is not available for Hinged products)
UK:
Roman Limited, Whitworth Avenue, Aycliffe Business Park, County Durham, DL5 6YN, England, UK.
Ladytown Business Park Naas County Kildare Ireland
IRELAND SALES:
Phone: +353 (0) 45 408 118
Email: irelandsales@roman-showers.com
ASIA PACIFIC:
Roman Asia Sdn Bhd (941603-K) No.6, Jalan Olivin, Taman Industri Sungai Purun, 43500 Semenyih, Selangor, Malaysia.
ASIA PACIFIC SALES:
Phone: +60 (0) 3 8727 8816
Email: romanasia@roman-showers.com
www.roman-showers.com
A&D SHOWROOM - ASIA PACIFIC: Cosentino Centre Kuala Lumpur - Malaysia, Jalan TSB 8, Taman Industri Sungai Buloh 47000 Petaling Jaya, Selangor, Malaysia
