house
Ceramic functional coating Free of solvents Vapour permeable
home
THE SOLUTION APPROACH
Pro Color house offers remarkably reliable protection. Our own developed processing technique, made in Germany, guarantees the
THE PROBLEM
The formation of micro-cracks as early as the drying phase leads to the facade, housing and components absorbing moisture. The consequences are embrittlement due to thermal and hygric movement of the base when ageing. Moist facades become dirtier and become covered in algae much quicker - evaporation energy on moist facades as well as component moisture lead to heat losses. Higher heating or cooling energy requirements are the result.
following advantages:
Permeable to water vapour Water repellent and rain tight Reflects heat Paint resistant / crack filling (elongation at break over 150%) Anti-wear (wash resistant) Non-flammable Resistant to damaging emissions High UV and weather resistance
PHYSICAL PROPERTIES
PHYSICAL PROPERTIES
Due to the above average number of ceramic balls, Pro Color house
When a painted surface dries* small cracks develop on many pro-
achieves remarkable properties.
ducts, which then offer no moisture protection. Whether it is concrete, sand-lime brick, metal or hybrid building techniques, sufficient
Resistant to driving rain Crack filling Vapour permeable Heat reflecting
protection is provided by preventing all types of weathering caused by environmental and weather conditions from the very beginning.
Pro Color house provides the properties of active drying without corrosion or formation of cracks.
* Wet film layer thickness approx. 2 mm on glass. Clear cracks can be identified with other products after the drying process.
Standard Coating
Pro Color house
PHYSICAL PROPERTIES SUSTAINABLE RETENTION OF VALUE
The UV and IR rays from the sun are proven to damage buildings and interiors. This effect is accelerated additionally in combination with salty air near to saltwater. Interiors are protected in the long-term with Pro Color house.
Setting up or maintaining technical buildings and installations as well as industrial systems means constantly making considerable investments. With the Pro Color product range, we offer protection
Voltotherm Fiore IR radiator, Power: 1200 W
for a variety of problematic areas in such buildings and systems.
Distance: 10 cm
This supports retention of value and is simultaneously kind to the
Application time: 3 min
environment.
Simulation of infrared rays to approx. 7-8 years
Standard Coating
Pro Color house
Coated with Pro Color house
Standard paint after 5 years
TEMPERATURE REFLECTING Achieve a comfortable climate and actively reduce your heating costs in winter. The temperature reflecting functional coating PRO COLOR house, together with insulating materials, achieves a pleasant climate - even during the summer months.
ECONOMIC / ECOLOGICAL
You can save heating costs in winter and save energy in summer because Pro Color house reflects the rays of the sun and therefore reflects heat. The operating times of air-conditioning units are remarkably reduced and we therefore spare our natural resources. Pro Color house not only protects against corrosion and growth, but also provides the building with a visually attractive appearance over many years.
ADVANTAGES Heat regulating effect Can positively influence the room climate Optimises the heating effect Reduces the risk of mould Free of solvents Vapour permeable Non-flammable Durable Ecofriendly
INTERIOR PROBLEMS
Low surface temperatures on outside walls - the result is the
formation of condensation at thermal bridges
The result is the development of mould and strong odours The large temperature difference between the floor and ceiling
SUITABLE BASES
creates an uncomfortable climate
Mineral bases Plaster Concrete Sand-lime brick Fibre cement boards Intact old paint coating Hard PVC Wood Wallpaper Metal
...is the solution
Classic areas of application: Living rooms and bedrooms, children‘s rooms, bathrooms and kitchens, cellars and hobby rooms
HEAT REFLECTING PRO COLOR PRODUCT FAMILY Comfort in the home is improved by reflecting the heat. The temperature difference between the floor and ceiling
is minimised and promotes a sense of well-being.
We go even further... Innovative products from Pro Color can be found in many areas of construction trades. Do you have a specific problem and have been looking for an innovative solution for a long time?
Room
22˚C
21˚C
We have a wide range of high quality products, which meets a variety of specific demands from our industry and private customers. The specially developed process technology guarantees the remarkable properties of our products. A functional coating with system for every application. Compare for yourself.
Flooring
18˚C alternative product
19˚C Pro Color home
siegel
TEST RESULTS AND TECHNICAL DATA
Test Gloss Cleaning resistance
(Institut für Lacke und Farben e.V. / Magdeburg)
Result Matt No damage or delamination.
Contrast ratio (coverage capacity)
Test method DIN EN ISO 2813 Water temperature 25°C and 60°C, 90 bar water pressure, contact time 20s, with and without damage by cross cutting. DIN EN ISO 6504-3
Density
DIN EN ISO 2811-1
Density: ρ = 0.923 g/mL
Layer thickness ≤ 200 μm: class 4 Layer thickness = 300 μm: class 3 Layer thickness ≥ 400 μm: class 2
Adhesion
DIN EN ISO 4624
Tear resistance: σ = 1.0 MP Cohesion break
Determination of brightness
DIN 53778-3
Carbon dioxide permeability
DIN EN 1062-7
Standard colour value: Y = 89,6 Diffusion equivalent air layer thickness sD = 1.48 m
Determination of grain size
DIN EN ISO 2431
Grinding fineness = 60-70 µm Classification: fine
TEST RESULTS AND TECHNICAL DATA
Test Assessment of chalking level Artificial weathering
(Institut für Lacke und Farben e.V. / Magdeburg)
Test method DIN EN ISO 4628-6
Result Classification: chalking level 0
DIN EN ISO 11507
Original status Gloss change, visual
Matt
Colour change, visual Colour change, colorimetric
White
Stain formation Level of bubbling Level of cracking Level of flaking Level of chalking
Change after: 500 h 1000 h 0
0.17 (not noticeable)
0 0 0 0
0.17 (not noticeable) 0 0 0 0
0
-
0
±0
0 0 0 0
TEST RESULTS AND TECHNICAL DATA
(Institut für Lacke und Farben e.V. / Magdeburg)
TEST RESULTS AND TECHNICAL DATA
(Institut für Lacke und Farben e.V. / Magdeburg)
Test Determination of wet wear Assessment of surface property: Probe method pH level
Test method DIN EN ISO 11998 DIN EN ISO 4287 DIN EN ISO 4288 DIN EN ISO 976
Result Classification: class 2 Arithmetical average: Ra = 8.6µm
Test Microscopic layer thickness determination, cavity measurement (ball)
Test method -
Result Layer thickness: 213 ± 20 µm ball diameter: 31 ± 15µm
pH = 10,8
Water / water vapour membrane effect
-
proven
Sand test Temperature change test Determination of drying level
ATSM D 968 DIN EN ISO 4628 DIN 53150
Water penetration capacity (driving rain test)
-
Low water absorption, moisture locking effect proven.
Determination of dry layer thickness
DIN EN ISO 2808
No removal gravimetrically determined No noticeable visual change Drying level 1 Drying level 4 0,5 h > 48 h Wet layer thickness: 400µm Dry layer thickness: 200µm
Heat-up of coated component surfaces
-
Low heat-up in sunlight in comparison with a comparable, grey surface.
Heat insulation
-
Thermal insulating effect in model test proven.
Assessment of processing capacity
-
Good – very good
Traction test
DIN 53504
Dry layer thickness: 200µm tractional strength: σmax = 0.7± 0 MPa elongation at break: εR = 147.6 ± 9.7%
Microbiological examination
At 25°C, no growth of mould is expected up to a relative air humidity of 75%.
FOR YOUR NOTES
FOR YOUR NOTES
MAExperience GmbH & Co. KG An der Siegtalbr端cke 20 57080 Siegen / Deutschland Phone: +49 (0) 271 / 676090-10 info@maexperience.com www.maexperience.com
Provided by:
house
home