2009
Each year, when Performance Machine develops its Strategic Business Plan, we highlight one of our philosophies that will drive our business. This philosophy becomes a sort of theme for the year, an internal reminder of the standards we set for ourselves. In 2009, we have chosen Quality. Performance Machine has been setting quality standards in the motorcycle industry since 1970 and continues to be the leading aftermarket manufacturer of motorcycle wheels, brakes, and controls. Performance Machine’s quality philosophy extends beyond the shiny surfaces of our product into the veins of every process and procedure within our organization. We call this “Quality Beyond The Surface”. In 2009, we are dedicated to ensuring that our customers experience this philosophy as we strive to exceed your expectations. New products, programs, and an innovative new finish promise to make 2009 an exciting year. First, we are introducing several new wheels designs; the classic Riviera, the radical Rival, and the Factor which features the new Contrast Cut Stealth finish. The Contrast Cut Stealth finish is available only on the Factor wheel and features a striking combination of raw machined aluminum with a matte black anodized finish. The military grade finish is one of the most durable finishes a motorcycle wheel has ever seen. The response to the Contrast Cut Platinum finish has been so overwhelming we have applied it to the popular Torque wheel design in 2009. By popular demand, PM will launch a line of wheels for Victory motorcycles. Wheels will be available with matching discs and belt sprockets for a wide range of Victory motorcycles, including the Vision and the Hammer. Also, look for PM Edition Bikes in a showroom near you in 2009. This new program equips stock Harley Davidson floor models with Performance Machine products so you can walk right into the dealership and pick out your customized motorcycle. We have expanded the Contrast Cut line once again to include several of our Bagger accessories and a wider range of front and rear brakes. We share your passion for motorcycles and take pride in the PM products that define you and your ride. We hope you enjoy the product of another hard year at work in the Performance Machine R&D department. Let us know what you think!
Table of Contents
BRAKE SYSTEMS FOR HARLEY DAVIDSONS® FRONT BRAKES 2000 & Up Most Models 1984 & Up Most Models 2008-09 FLH & V-Rod Radial Mount Caliper for Customs Custom Springer Rebuild kits & brake accessories
Pages 13, 15, 17 Pages 14 -16 Page 15 Page 16 Page 17 Page 18
REAR BRAKES Drive Side Brake for Softail Sprocket Brake 2000 & UP Softail 1987-99 Softail 1987-99 Softail (6 Piston Caliper) 1987-99 FXR 2000 & UP Dyna V-Rod 1991-99 Dyna 1984 & Up FLH & FLT 2000-07 Sportster Early Square Swingarm Custom application (6 Piston Caliper) Radial Mount Bracket Custom Rigid Frames Rebuild kits & brake accessories
Page Page Page Page Page Page Page Page Page Page Page Page Page Page Page Page
21 21 22-23 24 23 24 25 26 26 27 28 29 29 30 30 18
CONTROLS & SWITCHES Forward Controls Mid Controls Floor Boards Rear Master Cylinders Hydraulic Clutch Slave Housing Clutch Master Cylinder Clutch Lever Assemblies & Levers Front Master Cylinders Switch Housings Mirrors Grips Throttle housings FL Switch Housings
Page Page Page Page Page Page Page Page Page Page Page Page Page
33-34 35 37 38 38 39 39 40 41-42 44 43 43 42
CONTOUR BELT DRIVE PRIMARY Contour Primary
Page 36
TOURING ACCESSORIES
Page 47-48
IMAGE SERIES DISCS
Page 51-54
Image Series BELT Sprockets Image Series CHAIN Sprockets
Page 55-56
Custom Bolt Kits
Page 58
WHEELS PM Forged Wheels PM Phat Wheels Wheels for use w/PM Driveside Brake & Sprocket-Brake
Page 61-88 Page 88 Page 87
Page 57
WIDE WHEEL KITS TM Phatail Kit
Page 91-92
DRAG RACE Pro Stock Wheels and Brakes Top Fuel Wheels and Brakes
Page 95 Page 95
DIRT TRACK Dirt Track Brakes Dirt Track Wheels
Page 96 Page 96
PM APPAREL More stuff!
Page 97 Page 98
Printing Credit: Precision Offset, Irvine CA. Harley Davidson is a registered Trademark of the Harley Davidson Motor Company Inc., Milwaukee, WI. Performance Machine is not affiliated with Harley Davidson® or any other motorcycle manufacturer. Copyright © 2008 Performance Machine Incorporated
Check for new product and product updates, as well as instruction sheets and technical information at: http://www.performancemachine.com 1-800-479-4037
2
3
Product Finishes
POLISHED
Performance Machine has a reputation for supplying only the highest quality polishing on all of its components. This is a product of our in-house polishing shop. Each polisher takes pride in supplying a top quality finish to every product. The high luster finish is easy to maintain and PM recommends Mothers or Eagle One Aluminum Polish to keep it like new. POLISHED
CHROME
Show chrome is what you get with every PM chrome product. Our secret is in the preparation! We send each raw part to our polishing department first, creating a mirror like finish before the chrome is even layed on! This process allows PM to create ultra smooth and durable chrome plated parts. Lustrous finish is easy to maintain with proper maintenance and care. Includes a two year from date of purchase warranty on chrome plating. CHROME
BLACK ANODIZED
For those who prefer a more subtle look with less shine, PM offers our most popular calipers and Contour control systems in black anodized. Much like our chromed brakes, we send each raw part to our polishing department first, creating a mirror like finish before the anodizing is done! The result is an exceptionally smooth finish. Black anodized is also the easiest to care for finish that PM offers. BLACK ANO
CONTRAST CUT
PM is the innovator of Contrast Cut and we have expanded our line to include components. Each Contrast Cut PM product goes through the same anodizing process, but this time we take it one step further. After anodizing, the product is machined again to expose the raw aluminum of the PM logo. CONTRAST CUT
DISC FINISHES
All PM Discs are CNC machined and ground to perfection. Performance Machine Stainless discs are uncoated 420 Stainless Steel. All two piece, full floating and Image disc carriers are billet aluminum.
Product Maintenance
Recommended Product Maintenance
4
Polished Brakes, Controls and Accessories: Mild soap and water is the best method to keep them clean. To keep the show polish, we recommend Mothers Aluminum Polish.
Chrome Plated Brakes & Controls: Mild soap and water to clean them and a healthy coat of Carnuba wax applied often with a soft cloth.
Black Anodized Brakes, Controls and Accessories: Wash with mild soap and water, no detergents or harsh chemical cleaners that can destroy the black anodized finish. You may use a non-abrasive wax with UV protectant on the black anodized portion of the product to protect it. Never use a harsh or abrasive wax as it will remove the black anodized finish. Avoid exposure to UV rays whenever possible.
Caring For Your PM Wheels Polished Wheels: Cleaning: Depending on the condition of the wheel, a simple wipe down with a dry, soft cloth can be done, or clean with mild soap and water. Never use a chemical cleaner on your polished wheels. Polishing: The finish of the wheel will tend to dull after being exposed to road dirt, chemicals and pollutants. A high quality aluminum polish and a little bit of time is all it takes to revive the luster of the aluminum.
Chrome Wheels: Cleaning: Clean your wheels often, this will remove contaminates that eat your chrome and will extend the life of the chrome many years. Never use chemical cleaners, instead use mild soap and water and a soft cloth to clean the wheels. Waxing: High speed and long distances on dirty roads can have the same effect as sandblasting your wheels and a good coat of wax is their only protection. We recommend Carnuba type wax applied often with a soft cloth after each ride.
Standard Contrast Cut, Contrast Cut Platinum, and Contrast Cut Stealth Wheels: Clean and Care of Black Anodized Finish: Wash with mild soap and water, no detergents or harsh chemical cleaners that can destroy the black anodized finish. You may use a non-abrasive wax on the black anodized portion of the product to protect it. Never use a harsh or abrasive wax as it will remove the black anodized finish. Matte Black Anodized Area (Contrast Cut Stealth): Wash with mild soap and water. No detergents or harsh chemical cleaners should be used as they can destroy the anodized finish. Wax and/or cleaners containing wax are not recommended as they may leave an uneven finish on the matte black surface. Detail spray or WD40 also work well for “dry cleaning� or wipe-down. Due to the semi-rough surface of the Stealth Cut finish, we recommend using a micro-fiber or other lint-free type of cloth so as not to leave behind any remnants of the cloth. Clean and Care of Milled Area (Standard Contrast Cut): Wash with mild soap and water, no detergents or harsh chemical cleaners. To remove stains on the milled area you may use the following methods depending upon the condition of the wheel. 1.A mild MAG polish will remove mild stains from the milled area, but will make the milled area shiny as it contains some abrasives. CAUTION: Take extreme care not to use this on the black ano surface of any product as it will remove the black finish. 2.Scotch bright can be used to remove more severe stains on the milled area. CAUTION: Measures should be taken up to and including masking to ensure that the black ano surface of any product is not damaged. 3.To retain the satin finish of the milled area a MILD scotch bright cloth may be used very carefully to clean the surface. Clean and care of Polished surface ( Contrast Cut Platinum): The polished area of the wheel will tend to dull after being exposed to road dirt, chemicals and pollutants. You can use a high quality aluminum polish to revive the luster of the aluminum. Make sure to completely protect the black ano portion of the wheel, up to and including masking, to ensure that the black ano surface is not damaged.
5
PM Wheel Testing
Each Performance Machine Wheel and Brake is designed and engineered to specific standards and thoroughly tested. Starting with computer simulated stress analysis, our engineers assess each design. We do not stop there, though, as we quantify our findings with data from physical testing in our sophisticated in-house test department. PM tests to strict world wide standards such as JASO and TUV.
Torsional Load Tester
The PM Torsion Load Test simulates starting and stopping, as well as the occasional burn out. Load sensitive rams cycle back and forth replicating real world style torture in an attempt to rip the hub out of the rim. Each wheel design, as well as size is tested before PM goes into production.
Impact Tester
The massive PM Impact Testing unit simulates the pot holes and road hazards that a wheel is subjected to in the real world. We wrap each and every wheel size and design with a tire and replicate a hard edged hit; the wheel must retain air pressure for a specific time in order to pass.
Side Load Tester
Motorcycle wheels are subjected to incredible stress during cornering and we have reproduced these forces with our side load test unit. As with all of our testing, each wheel design, as well as size is subjected to this mechanical torture and then evaluated for damage. If a wheel does not survive this or any other test, it is scrapped and redesigned.
Radial Load Tester
The giant PM Radial Load Tester simulates a load on a tire/wheel assembly. The wheel is spun up to speed and loaded to replicate real world forces. The wheel is forced to endure countless rotations and is then checked for flaws.
PM Brake Testing
A stock V-Twin comes out of the factory with a bit over 50 horsepower on tap, rarely does it stay that way, though and the bulk of these bikes are upgraded with high performance pipes, cams, carbs and other go fast parts. In an effort to increase performance many riders overlook the very system designed to bring it all to a stop. With that in mind, we used our dyno and compared stock brakes to PM systems.
The dyno is run up to 60 MPH and then the brakes are applied. The first run is with the stock single piston floating caliper and then with PM’s 4 piston unit. This test was repeated over and over with nearly identical results. The difference is pretty substantial.
At 80 MPH, the disparity between stock and high performance brakes is most apparent. Although this test does not take into account traction, rear brakes, or any number of other variables, it does show the potential difference upgrading the brake system on your bike can make.
The stock 4 piston calipers are considered by most to be significantly better then previous versions, so we pitted them against our best. In this case a 6 piston differential bore caliper and a full floating 13� disc (stock is 11.5�).
We tend to find ourselves running the highways somewhere near 80 MPH, so this particular comparison was an eye opener. The stopping difference is nearly 4 car lengths!
6
PM Road Show
2009 Event Schedule: February 7th - 9th, Cincinnati V-Twin Expo, Cincinnati, OH February 14th - 16th, Powersports Dealer Expo, Indianapolis, IN Feb 27th - March 8th, Daytona Bike Week, Daytona Beach, FL April 22th - 26th, Laughlin River Run, Laughlin, NV April 30th - May 3rd, Thunder Beach, Panama City Beach, FL May 8th - May 17th, Myrtle Beach Spring Bike Rally, Myrtle Beach, SC June 1st - 6th , Americade, Lake George, NY June 13th - 21st, Laconia, Meredith, NH July 17th - 19th, Carlisle, PA July 18th - 19th, LA Calendar Motorcycle, Long Beach, CA July 28th - August 9th, Black Hills Rally, Sturgis, SD September 17th - 20th, DelMarva, Ocean City, MD September 23th - 27th, Street Vibrations, Reno, NV October 15th -18th, Biketoberfest, Ormond Beach, FL October 30th - November 1st, Lone Star Rally, Galveston, TX
Several of these dates were not confirmed at press time and may change. For the most up to date schedule, check out www.performancemachine.com
Contour Mirrors: pg. 44
Bag Latches: pg. 48
FL Levers & Floorboards: pg. 37
Wheels pg. 61
New 2009! Contrast Cut Touring Accessories
FL Fuel Doors: pg. 47
FL Speaker Covers: pg. 47
FL Hand Controls: pg. 42 FL Grips: pg. 43
FL Front Brakes: pg. 13 -15 FL Rear Brakes: pg. 27
Front Brakes
13
Front Brakes 2000-09 Models
4 Piston Differential Bore Caliper This high performance caliper features an ultra clean look and our proven 4 piston differential bore technology. Order 1 left caliper for single disc and 1 right and 1 left for dual discs. Will not work with 2008-09 FLH or 2006-09 V-Rod models which utilize a brake master cylinder with a reduced piston size. Customers who opt for the PM 4 piston differential bore calipers must upgrade to an 11/16” brake master cylinder for optimal performance.
Differential Bore
Calipers
2000-06 FXD, FXDX, FXDS, FXDL, FXDWG, (11.5” Discs only)
2006-09
2000-09
2000-2007
2000-2007
2000-05
FXD, FXDX, FXDS, FXDL, FXDWG, (HD 300mm Discs only)
FXST, FXSTD, FXSTB
FLST (all models) all Fatboy & Heritage (except FXSTS), XL, XLH
FLH, FLHT, FLTR, FLT, FLHR, FLHX
VRSC (except Street Rod)
137X4B CALIPER - 11.5” & 300mm DISCS
Left Side
Works With:
0053-2919
Right Side
0053-2920
To choose caliper finish, add the abbreviation to the end of the part number. Stock Disc
PM 1pc Disc
PM Image Disc
PM 13” Disc
Polished -P Chrome -CH
$399.95 $449.95
Black Ano -B Contrast Cut -BM
$449.95 $449.95
6 Piston Differential Bore Caliper
2000-09 Models Differential Bore
The most powerful and stylish brake available for the new generation bikes. Order 1 left caliper for single disc and 1 right and 1 left for dual discs. Will not work with 2008-09 FLH or 2006-09 V-Rod models which utilize a brake master cylinder with a reduced piston size. Customers who opt for the PM 6 piston differential bore calipers must upgrade to an 11/16” brake master cylinder for optimal performance.
Calipers
2000-09
2000-07
FXD, FXDX, FXDS, FXDL, FXDWG, FXST, FXSTD, FXSTB, FLST (all models) all Fatboy and Heritage (except FLSTS and FXSTS)
FLH, FLHT, FLTR, FLT, FLHR, FLHX, XL, XLH
2000-05 VRSC (except Street Rod)
112X6B CALIPER - 11.5” DISCS
Left Side
0051-2915
Right Side
0051-2916
112X6B CALIPER - 13.0” DISCS
Left Side
PM 1pc Disc
PM Image Disc
0051-2918
To choose caliper finish, add the abbreviation to the end of the part number. Polished -P $449.95 Black Ano -B $499.95 Chrome -CH $499.95 Contrast Cut -BM $499.95
Works With:
Stock Disc
Will not work on 2006 and up Dynas. 0051-2917 Right Side
PM 13” Disc
Front Brakes 1984-99 Models
4 Piston Differential Bore Caliper
Differential Bore
The most powerful 4 piston front caliper available anywhere! Caliper bolts directly to fork. Order 1 left caliper for single disc and 1 right and 1 left for dual discs. Must order caliper bolt kit to fit a Heritage Springer fork.
1997-1999 FLST all models, including all Fatboy and Heritage models
1984-1999
1984-1999
1984-1999
FXST all models except FXSTS
FXR, FXD, FXWG all models except FX with wire wheels
FLH, FLT, FLHR
14
Calipers
1997-2008 FLSTS
137X4B CALIPER - 11.5” DISCS
Left Side
0053-2915
FLSTS Caliper 1997-2008 Left Side 0053-2916
Right Side
0053-2916
FLSTS Caliper Bolt Kit ~ Required 0109-0100-CH
To choose caliper finish, add the abbreviation to the end of the part number. Polished -P $399.95 Black Ano -B $449.95 Chrome -CH $449.95 Contrast Cut -BM $449.95
Works With:
Stock Disc
PM 1pc Disc
PM Image Disc
PM 13” Disc
6 Piston Differential Bore Caliper
1984-99 Models Differential Bore
Single or dual, this is the very best front brake set up for the 99 and earlier front end! Caliper bolts directly to fork. Order 1 left caliper for single disc and 1 right and 1 left for dual discs.
1984-1999 FLST all models, including all Fatboy and Heritage models
1984-1999 FXST all models except FXSTS
1984-1999
1984-1999
FXR, FXD, FXWG XL, XLH, all all models models except except FX with XLH wire wheels wire wheels
Calipers
1984-1999 FLH, FLT, FLHR
112X6B CALIPER - 11.5” DISCS
Left Side
0051-2909
Right Side
0051-2910
112X6B CALIPER - 13.0” DISCS
Left Side
0051-2913
Right Side
0051-2914
To choose caliper finish, add the abbreviation to the end of the part number. Polished -P $449.95 Black Ano -B $499.95 Chrome -CH $499.95 Contrast Cut -BM $499.95
Works With:
Stock Disc
PM 1pc Disc
PM Image Disc
PM 13” Disc
15
Front Brakes 08-09 FLH & 06-09 VRSC Models
4 Piston Caliper PM has created a new 4 piston billet aluminum caliper specifically engineered for 2008-09 HD FL models as well as 2006-09 HD VRSC models utilizing the stock brake master cylinder. These HD models utilize a smaller 15mm piston in the brake master cylinder which requires the use of a smaller volume caliper. This PM 4 piston caliper uses PM’s proven caliper design standards to optimize the braking performance on these specific HD models. Customers who opt for the PM 4 or 6 piston differential bore calipers must upgrade to an 11/16” brake master cylinder for optimal performance. PM does not recommend using the stock HD 15mm brake master cylinder with the PM 4 or 6 piston differential bore calipers. 2008-09
2008-09
FLHR, FLHRC, FLHX, FLHR, FLHT, FLHTC, FLHCU Works With:
125X4B CALIPER - 300mm DISCS
Left Side Stock Disc
PM 1pc Disc
VRSCDX, VRSCD, VRSCAW
PM Image Disc 300mm Image Disc
0052-2413
0052-2414
Right Side
To choose caliper finish, add the abbreviation to the end of the part number. Polished -P Chrome -CH
$399.95 $449.95
$449.95 $449.95
Black Ano -B Contrast Cut -BM
4 Piston Classic Caliper
1984-99 Models
The original 4 piston billet aluminum caliper is still the best! Get serious about stopping, get PM brakes! Order single or dual calipers & brackets.
1984-1999 FXR, FXD, FXWG all models except FXLR with wire wheels
1984-1999
1984-1999
XL, XLH, all models except XLH with wire wheels
FXST all models except FXSTS
1984-1999 FLST all models, including all Fatboy & Heritage models except FLSTS
This caliper is not guaranteed to fit stock or custom wire wheel applications on narrow forks because of clearance problems. See page 16 for narrower 125X4SL caliper. 125X4R CALIPER - 11.5” DISCS Single (1) Caliper & Bracket
Left Side
PM Image Disc
1213-0018
Bracket Only
Left Side PM 1pc Disc
Right Side
To choose caliper finish, add the abbreviation to the end of the part number. Polished -P $449.95 Polished -P $699.95 Chrome -CH $499.95 Chrome -CH $799.95 Black Ano -B $499.95 Black Ano -B $799.95 Contrast Cut -BM $499.95 Contrast Cut -BM $799.95
Works With:
Stock Disc
Dual (2) Calipers & Brackets
1213-0017
PM 13” Disc
0023-1522GE
Right Side
0023-1523GE
To choose bracket finish, add the abbreviation to the end of the part number. Polished -P $47.50 Black Ano -B $65.00 Chrome -CH $65.00
Front Brakes 1984-99 FXLR & XLH Models
4 Piston Classic Caliper
16
Narrow 4 piston, 4 pad caliper eliminates clearance problems and spongy brakes. Order single or dual calipers & brackets. Can be used with 11.5” stock discs.
1984-1999 FXLR and XLH Equipped with a single disc with a stock or custom wire spoke wheel. 125X4SL CALIPER - 11.5” DISCS Single (1) Caliper & Bracket
Dual (2) Calipers & Brackets
1219-0017
Left Side
Right Side
1219-0018
To choose caliper finish, add the abbreviation to the end of the part number. Polished -P $349.95 Polished -P $699.90 Chrome -CH $399.95 Chrome -CH $799.90 Black Ano -B $399.95 Black Ano -B $799.90 Contrast Cut -BM $399.95 Contrast Cut -BM $799.90
Works With:
Bracket Only
Left Side
0023-1522GE
Right Side
0023-1523GE
Stock Disc
PM 1pc Disc
PM Image Disc
PM 13” Disc
To choose bracket finish, add the abbreviation to the end of the part number. Polished -P $47.50 Black Ano -B $65.00 Chrome -CH $65.00
4 Piston Radial Mount Caliper
Custom Front Ends
Having done duty on the GP circuit for a few years, the Radial Mount Caliper is available for the modern Custom. By design, radially mounted calipers are stiffer than traditional mountings, and will hold alignment with the rotor much better. The result is better pad contact with your disc, better braking and minimized heat. Requires custom fork with Radial Brake mounting tabs and may require custom spacers to match your disc size. Custom Front End Ohlins, Showa and other Metric bike front ends with Radial caliper mounts.
This caliper WILL NOT fit stock Harley or most aftermarket forks.
RADIAL MOUNT CALIPER - 10” - 11.5” DISCS
Left Side
0052-2405
Right Side
0052-2406
To choose caliper finish, add the abbreviation to the end of the part number. Polished -P $549.95 Black Ano -B $599.95 Chrome -CH $599.95 Contrast Cut -BM $599.95
Works With:
Stock Disc
To Order please call 1-800-479-4037 or visit www.performancemachine.com
PM 1pc Disc
PM Image Disc
PM 13” Disc
17
Front Brakes 1988-2006 HD Springer Models
4 Piston Caliper The original 4 piston billet aluminum caliper is still the best! Decrease stopping distance with less effort at the lever. Single disc only.
1988-2006
1988-2006
FXSTS Springer Softail
FXSTSB Bad Boy Softail
When used with PM discs, Springer front brakes applications MUST USE button head torx for proper clearance. 125X4S CALIPER - 11.5” DISCS
1988-99 Springer Caliper & Brkt Right Side 1217-0017
2000-06 Springer Caliper & Brkt Right Side 1230-0017
To choose caliper finish, add the abbreviation to the end of the part number. Polished -P Chrome -CH
Works With:
$429.95 $489.95
Black Ano -B Contrast Cut -BM
$489.95 $489.95
Bracket Only Stock Disc
PM 1pc Disc
PM Image Disc
PM 13” Disc
1988-99 Springer Bracket Right Side 0023-1521JR
2000-06 Springer Bracket Right Side 0023-1521VR
To choose bracket finish, add the abbreviation to the end of the part number. Polished -P Chrome -CH
$147.50 $165.00
Black Ano -B
$165.00
2 Piston Classic Caliper
Custom Springer
Two piston caliper designed for custom bike builder. Brackets are axle mounted and floating. Use the same bracket for right and left. For dual calipers & brackets, order two. 125X2 CALIPER & BRACKET - 10” DISCS
5/8” Axle
2010-0046
2010-0047
3/4” Axle
125X2 CALIPER & BRACKET - 11.5” DISCS
5/8” Axle
2010-0146
2010-0147
3/4” Axle
125X2 CALIPER & BRACKET - 13” DISCS
5/8” Axle
2010-0346
3/4” Axle
2010-0347
To choose caliper finish, add the abbreviation to the end of the part number. Polished -P $295.00 Contrast Cut - BM $295.00 Bracket Only - 10” Discs
5/8” Axle
0023-0021AR-6
5/8” Axle
0023-1521AR-6
5/8” Axle
0023-3021AR-6
3/4” Axle
0023-0021AR-7
Bracket Only - 11.5” Discs
PM 1pc Disc
PM Image Disc
0023-1521AR-7
Bracket Only - 13” Discs
Works With:
Stock Disc
3/4” Axle
PM 13” Disc
3/4” Axle
0023-3021AR-7
To choose bracket finish, add the abbreviation to the end of the part number. Polished -P $95.00 Black Ano -B $95.00
Brake Pads and Rebuild Kits
Rebulid Kits For PM Calipers CALIPER
PART#
CALIPER
PART#
125X4R
0052-3002
$9.00
162X2
0056-3002
$9.50
125X4RSPH
0052-3002
$9.00
125X4SL
0052-3002
$9.00
137X4B
0053-3903
$12.15
125X4S
0052-3002
$9.00
112X6B
0051-3901
$12.99
125X2
0052-3001
$4.50
137X6
0053-3902
$9.50
Radial Mount
0052-3002
$9.00
112X6RSB
0051-3902
$12.95
Intergrated 0053-3904
$10.60
18
Brake Pads PAD MANUFACTURER COMPOUND PART#
PAD MANUFACTURER COMPOUND PART#
Caliper: 125X2 - Order One Pair
Caliper: 125X4R, 137X4B - Order One Pair EBC
Sintered
0052-1602EM
$35.00
EBC
Sintered
0052-1601EM
$39.95
EBC
Organic
0052-1602ED
$27.95
EBC
Organic
0052-1601ED
$20.00
Caliper: 125X4S, 125X4SL - Order Two Pair
Caliper: 112X6B - Order One Pair EBC
Sintered
0051-1602EM
$39.95
SBS
Sintered
0052-1601SA
$24.95
EBC
Organic
0051-1602ED
$39.95
EBC
Organic
0052-1601ED
$20.00
0053-1604SA
$39.95
0056-1600SA
$33.00
Caliper: 137X6 - Order One Pair
Caliper: Integrated Rear for Softail - Order One Pair EBC
Sintered
0053-1608EK
$39.95
EBC
Sintered
SBS
Organic
Caliper: 162X2 - Order One Pair
Caliper: Radial Mount - Order One Pair 0052-1606EK
$34.00
SBS
Organic
Anti-Rattle Springs Discription
Calipers
Part#
Discription
Calipers
Part#
Anti-Rattle Spring
125X4R
0052-1801
$2.70
Anti-Rattle Spring
112X6B
0051-1800
$6.50
Anti-Rattle Spring
137X4B
0052-1801
$2.70
Anti-Rattle Springs
162X2 (Order 2) 0056-1800
$4.55
Anti-Rattle Spring
Intergrated Rear 0053-1800
$8.50
Caliper Shim Kits Discription
Calipers
5/16” Shims
125X2, 125X4S 0019-9000
Part# $3.50
Assembly lubricant
Calipers
Part#
125X4R, 125X4SL, 125X4RSPH,137X4, 137X6, 112X6, 162X2
0019-9001
$4.55
137X4, 112X6
0019-9004
$4.55
2000 up HD
Discription Hydraulic lubricant for Caliper assembly capsule
Discription 3/8” Shims
0043-0010 $1.50
10mm Shims
Anchor Rods & Ball Rod Ends Description
Description
2” Rod asmbly - 5/16” ball rod ends
0028-9802
$55.00
12” Rod asmbly - 3/8” ball rod ends
0028-9912
$55.00
6” Rod asmbly - 5/16” ball rod ends
0028-9806
$55.00
14” Rod asmbly - 3/8” ball rod ends
0028-9914
$55.00
4” Rod asmbly - 3/8” ball rod ends
0028-9904
$55.00
3/8 X 3/8-24 Ball rod end
0074-0001-CH
$13.95
6” Rod asmbly - 3/8” ball rod ends
0028-9906
$55.00
1/4 X 1/4-28 Ball rod end
0074-0003-CH
$9.00
8” Rod asmbly - 3/8” ball rod ends
0028-9908
$55.00
5/16 X 5/16-24 Ball rod ends
0074-0004-CH
$9.00
10” Rod asmbly - 3/8” ball rod ends
0028-9910
$55.00
Master Cylinder Rebuild Kits Description
Description
5/8” Bore Std 12/96 and up
0060-3602
$15.95
3/4” Bore Std 12/96 and up
0060-3702
$15.95
5/8” Bore Std Pre- 6/95
0060-3603
$45.00
3/4” Bore Std Pre- 3/96
0060-3703
$49.95
5/8” Bore Std 6/95 - 11/96
0060-3604
$29.95
3/4” Bore Std 3/96 - 11/96
0060-3704
$34.95
5/8” Bore Contour
0060-3605
$15.95
Top Gasket for Contour Master
0060-1019
$6.50
Top Gasket for Standard Master
0060-1010
$3.95
9/16 Bore Contour
0060-3505
$39.95
11/16 Classic Master Cylinder
0060-3900
$34.50
11/16 Bore Contour
0060-3905
$33.00
Rear Brakes
21
4 Piston Driveside Caliper
Rear Brakes Driveside Brake
Completely concealed behind the belt sprocket, PM’s state-of-the-art brake system utilizes our time tested 4 piston caliper and a specially constructed billet aluminum bracket. The PM driveside brake will only work with 18” PM wheels. See page 87 for PM Wheels. Requires welding of supplied tabs and must use PM Disc, Belt Sprocket & Wheel.
1987-06 FXST, FXSTC, FLST, FLSTC, FLSTF, FLSTN, PM Phatail Kits Daytec Softail Style Models 125X4S CALIPER & BRACKET FOR DRIVESIDE BRAKE
1274-0074
1987-99
2000-07 PM Phatail Kit
1285-0074 1285-0074B
W/O Weld on Tabs
1284-0074A
Most Daytec Softail Style Chassis 3/4” Axle With Weld on Tabs
1284-0074
Softail Style Chassis with 1” Axle With Weld on Tabs 1284-0074-1
Works With:
W/O Weld on Tabs 1284-0074A-1
To choose caliper finish, add the abbreviation to the end of the part number. Stock Disc
Custom Application
PM 1pc Disc
PM Image Disc
PM 13” Disc
Polished -P Chrome -CH
$699.95 $749.95
Black Ano -B Contrast Cut -BM
$749.95 $749.95
4 Piston Caliper Sprocket-Brake PM has developed a state-of-the-art sprocket-brake for the custom builder. This sprocket is machined from stainless steel and utilizes a 4 piston caliper. The stainless steel sprocket is polished and is only available in a 48 tooth configuration for a 530 chain. Requires weld in brake tab and custom brake line. See page 87 for PM sprocket-brake specific wheels. Designed for Custom Applications Only
Integrated Caliper/Bracket
Left Side
0052-2409
Right Side
0052-2412
To choose caliper finish, add the abbreviation to the end of the part number. Polished -P $549.95 Black Ano -B $599.95 Chrome -CH $599.95 Contrast Cut -BM $599.95 Sprocket Disc
Stainless Steel 0090-0548S-P $399.95 Bolt Kit 0109-0059-CH $10.00
4 Piston Integrated Differential Bore Caliper
Rear Brakes 2006-09 Softail Models
22
Late model Softails are now sporting a 200mm wide rear tire on a 17” rim. To fit all that wheel in the standard size swingarm, HD changed out the brake system. PM has taken it one step further and created a rear brake that replaces the OEM unit, looks better and stops faster!
2006-07 FXST, FXSTB, FLSTS
2008-09 FXSTB, FXSTC, FLSTF
This system is designed specifically for the 2006-07 and newer Softails that come stock with a 200mm tire. 2006-07 Models that still come with a 150mm tire will use the PM system below. Except 2008-09 may use this system with both the 200mm and 150mm tire size. May have to remove rotor when installing on a stock wheel. Integrated Caliper/Bracket for Softail
2006-07
1294-0077
2008-09
1256-0077
To choose caliper finish, add the abbreviation to the end of the part number. Polished -P $499.95 Black Ano -B $549.95 Chrome -CH $549.95 Contrast Cut -BM $549.95
Works With:
Stock Disc
PM 1pc Disc
PM Image Disc
4 Piston Integrated Differential Bore Caliper
PM 13” Disc
1987-06 Softail Models Differential Bore
Calipers
The ultimate rear brake for the HD Softail. Four differential bore size pistons are wrapped in a unique Forged Aluminum integrated caliper/ bracket creating the most powerful and consistent brake to ever grace the rear of your bike!
1991-09 PM Phatail Kit
1987-2007 FXST, FXSTC, FLST, FLSTC,FLSTF, FLSTN, FXSTD, FXSTB Except models with 200mm tire
Integrated Caliper/Bracket for Softail
1987-1999
1274-0076
1987-1999 1” Axle
1274-0076-1
2000-07 & 1991-09 PM Phatail 1285-0076
To choose caliper finish, add the abbreviation to the end of the part number. Polished -P $499.95 Black Ano -B $549.95 Chrome -CH $549.95 Contrast Cut -BM $549.95
Works With:
Stock Disc
PM 1pc Disc
PM Image Disc
PM 13” Disc
23
4 Piston Classic Caliper & Bracket
Rear Brakes 2000-06 Softail Models
A must have for the late model Softail. Proven PM 4 piston caliper and billet bracket are the ideal rear brake system for the 2000-2006 models.
2000-06
1991-09
FXST, FXSTC, FLST, FLSTC, FLSTF, FLSTN Except models with 200mm tire
PM Phatail Kit
125X4R CALIPER & BRACKET FOR SOFTAIL
3/4” Axle Only
1285-0052
To choose caliper finish, add the abbreviation to the end of the part number. Polished -P $449.95 Black Ano -B $499.95 Chrome -CH $499.95 Contrast Cut -BM $499.95 BRACKET ONLY
Works With:
0023-1526TE To choose bracket finish, add the abbreviation to the end of the part number. Polished -P $147.50 Black Ano -B $165.00 Chrome -CH $165.00 Bracket Only
Stock Disc
PM 1pc Disc
PM Image Disc
PM 13” Disc
4 Piston Classic Caliper & Bracket
1987-99 Softail Models
The proven performer! 4 Piston braking for your Softail. Easy bolt on installation.
1987-99 FXST, FXSTC, FLST, FLSTC, FLSTF, FLSTN, FLSTS, FXSTS
125X4R CALIPER & BRACKET FOR SOFTAIL
1987-99
1274-0052
To choose caliper finish, add the abbreviation to the end of the part number. Polished -P $449.95 Black Ano -B $499.95 Chrome -CH $499.95 Contrast Cut -BM $499.95 BRACKET ONLY
Works With:
Stock Disc
PM 1pc Disc
PM Image Disc
Bracket Only 0023-1526JJ
PM 13” Disc
To choose bracket finish, add the abbreviation to the end of the part number. Polished -P $147.50 Black Ano -B $165.00 Chrome -CH $165.00
4 Piston Caliper & Bracket
Rear Brakes 1984 - Early 87 Softail Models
24
Same state-of-the-art performance, but specially machined for your early Softail. 1984 thru early 1987 Softails had a detachable bolt-on anchor pin installed in the stock bracket. PM system utilizes stock anchor pin. 1984-87 FXST, FXSTC 125X4RSPH CALIPER/BRACKET - 11.5” DISCS Caliper & Bracket 1266-0052
Bracket Only 0023-1526HF
To choose product finish, add the abbreviation to the end of the part number Polished -P $449.95 Polished -P $147.50 Chrome -CH $499.95 Chrome -CH $165.00 Black Ano -B $499.95 Black Ano -B $165.00 Contrast Cut -BM $499.95
Works With:
Stock Disc
PM 1pc Disc
PM Image Disc
PM 13” Disc
6 Piston Differential Bore Caliper & Bracket
1984 - 87 Softail Model
Maximum braking power and stylish billet aluminum looks make this caliper worthy of the finest custom! Stylish billet aluminum bracket makes for easy bolt-on installation. Fits many custom chassis. 1984-89 FXST
1984-87 FXSTC, FLST, FLSTC, FLSTF FLSTN all models
112X6B CALIPER/BRACKET - 11.5” DISCS Caliper & Bracket 1274-0072
Bracket Only 0023-1526JU
To choose product finish, add the abbreviation to the end of the part number Polished -P $629.95 Polished -P $180.00 Chrome -CH $689.95 Chrome -CH $190.00 Black Ano -B $689.95 Black Ano -B $190.00 Contrast Cut -BM $689.95
Works With:
Stock Disc
PM 1pc Disc
PM Image Disc
4 Piston Classic Caliper & Bracket
PM 13” Disc
1987-99 FXR Models
High performance 4 piston braking power for FXRs. Easy bolt-on installation.
1996
1984-87
FXST
FXR, FXRS, FXRT
125X4R CALIPER/BRACKET - 11.5” DISCS Caliper & Bracket 1268-0052
Bracket Only 0023-1526EJ
To choose product finish, add the abbreviation to the end of the part number Polished -P $449.95 Polished -P $147.50 Chrome -CH $499.95 Chrome -CH $165.00 Black Ano -B $499.95 Black Ano -B $165.00 Contrast Cut -BM $499.95
Works With:
Stock Disc
PM 1pc Disc
PM Image Disc
PM 13” Disc
25
4 Piston Classic Caliper & Bracket
Rear Brakes 2000-09 Dyna Models
Designed for the 2006 and later Dyna, this bracket and spacer are topped with the classic PM 4 piston caliper. Requires brake line kit. Will not work with Floating Discs. 2006-07
2008-09
FXDI, FXDCI, FXDI35, FXDBI, FXDLI, FXDWGI
FXD, FXDC, FXDB, FXDL FXDF, FXDWG
125X4R CALIPER/BRACKET - 11.5” DISCS
Works With:
Stock Disc
PM 1pc Disc
PM Image Disc
PM 13” Disc
Caliper & Bracket 2006-2007 1295-0052
Bracket Only
Caliper & Bracket 2008-2009 1259-0052
Bracket Only
PM Stainless Steel Brake Line Kit
0085-2004
2006-2007 2008-2009
0023-1526ACE 0023-1526AFE
To choose product finish, add the abbreviation to the end of the part number. Polished -P $449.95 Polished -P $147.50 Chrome -CH $499.95 Chrome -CH $165.00 Black Ano -B $499.95 Black Ano -B $165.00 Contrast Cut -BM $499.95
4 Piston Classic Caliper & Bracket
2000-05 Dyna Models
PM’s 4 piston rear brake system for the 2000-2005 Dyna features a completely redesigned billet bracket and improved braking performance over stock. Requires brake line kit. 2000-05 FXDB, FXDC, FXDL, FXDWG
125X4R CALIPER/BRACKET - 11.5” DISCS
Works With:
Stock Disc
PM 1pc Disc
PM Image Disc
PM 13” Disc
Caliper & Bracket 1283-0052
Bracket Only 0023-1526RE
PM Stainless Steel Brake Line Kit
0085-2004
To choose product finish, add the abbreviation to the end of the part number. Polished -P $449.95 Polished -P $147.50 Chrome -CH $499.95 Chrome -CH $165.00 Black Ano -B $499.95 Black Ano -B $165.00 Contrast Cut -BM $499.95
4 Piston Classic Caliper & Bracket
Rear Brakes 1991-99 Dyna Models
26
The best rear brake for your Dyna! Significant improvement over stock in function and looks. Easy bolt-on installation.
1991-99 FXDB, FXDC, FXDL, FXDWG 125X4R CALIPER/BRACKET - 11.5” DISCS Caliper & Bracket 1279-0052
Bracket Only 0023-1526NJ
To choose product finish, add the abbreviation to the end of the part number. Polished -P $449.95 Polished -P $147.50 Chrome -CH $499.95 Chrome -CH $165.00 Black Ano -B $499.95 Black Ano -B $165.00 Contrast Cut -BM $499.95
Works With:
Stock Disc
PM 1pc Disc
PM Image Disc
PM 13” Disc
4 Piston Differential Bore Caliper & Bracket
2002-09 V-Rod
PM’s 4 piston differential bore rear V-Rod brake bolts right on and immediately improve braking performance and enhance the look of any V-Rod. Works with stock or PM disc. Requires brake line kit. 2002-09 VRSC 137X4B CALIPER/BRACKET - 11.5” & 300mm DISCS Caliper & Bracket
Bracket Only
2002-2004 1291-0073 2002-2004 0023-1526VU 2005 1290-0073 2005 0023-1526WU 1299-0080 2006-2007 HD Disc only 0023-1526AEU 2006-2007 HD Disc only 2006-2007 PM 300mm 1299-0081-A 2006-2007 PM 300mm 0023-1526AET-A 1257-0080 2008-2009 HD Disc only 0023-1526AGU 2008-2009 HD Disc only 2008-2009 PM 300mm 1257-0081-A 2008-2009 PM 300mm 0023-1526AGT-A Requires PM Stainless Steel Brake Line Kit
0085-2001-1R
To choose product finish, add the abbreviation to the end of the part number. Caliper & Bracket
Polished -P Chrome -CH Black Ano -B Contrast Cut -BM
Bracket Only
$499.95 $549.95 $549.95 $549.95
Polished -P Chrome -CH Black Ano -B
Works With:
$147.50 $165.00 $165.00 Stock Disc
PM 1pc Disc
PM Image Disc
PM 13” Disc
27
4 Piston Differential Bore Caliper & Bracket
Rear Brakes 2000-09 FL Touring
Differential Bore
Calipers
The big FL requires a big powerful brake and PM has just the system! Machined from billet alminum, coupled with our proven 137x4B Differential Bore Caliper it is the best rear brake you can buy for the 2000-2009 FLH! The race inspired small bore/large bore piston combination in this caliper allow it to compensate for uneven pad wear and create ideal pad to rotor contact. Requires brake line kit. 2000-09 FLHS, FLTC, FLTCU, FLTCTG, FLHTCU, FLHR, FLSTCI, FLHX 137X4B CALIPER/BRACKET - 11.5” & 300mm DISCS Caliper & Bracket
2000-01 2002-07 2008-09 HD 300mm 2008-09 PM 300mm
Works With:
Bracket Only
1287-0073 1290-0073 1257-0080 1257-0081-A
Requires PM Stainless Steel Brake Line Kit Stock Disc
PM 1pc Disc
PM Image Disc
PM 13” Disc
2000-01 0023-1526VU 2002-07 0023-1526WU 2008-09 HD 300mm 0023-1526AGU 2008-09 PM 300mm 0023-1526AGT-A 0085-2007
To choose product finish, add the abbreviation to the end of the part number. Polished -P $499.95 Polished -P $147.50 Chrome -CH $549.95 Chrome -CH $165.00 Black Ano -B $549.95 Black Ano -B $165.00 Contrast Cut -BM $549.95
4 Piston Differential Bore Caliper & Bracket
1984-99 FL Touring Differential Bore
Calipers
More Braking Power!!! This one was designed exclusively for the heavier FLH models’ unique braking needs. The race inspired small bore/large bore piston combination in this caliper allows it to compensate for uneven pad wear and create ideal pad to rotor contact. 1984-1999 FLHS, FLTC, FLTCU, FLTCTG, FLHTCU, FLHR, FLSTCI
137X4B CALIPER/BRACKET - 11.5” DISCS Caliper & Bracket 1277-0073
Bracket Only 0023-1526LU
To choose product finish, add the abbreviation to the end of the part number. Polished -P $499.95 Polished -P $147.50 Chrome -CH $549.95 Chrome -CH $165.00 Black Ano -B $549.95 Black Ano -B $165.00 Contrast Cut -BM $549.95
Works With:
Stock Disc
PM 1pc Disc
PM Image Disc
PM 13” Disc
To Order please call 1-800-479-4037 or visit www.performancemachine.com
4 Piston Caliper & Bracket
Rear Brakes 2005-09 Sportster
28
The beloved Sporty saw some major upgrades over the past few years, except in the braking department. In fact, the modern XL now comes with an archaic floating style caliper that for the most part had been abandonded in the late 90’s. We can fix that with the PM rear brake system for late model Sportsters. Includes caliper, bracket and spacers. Works with stock or PM 11.5” discs. 2005-09 XL, XLH, XLS 125X4RSPH CALIPER/BRACKET Caliper & Bracket
2005-07 2008-09
Bracket Only
1293-0052 1261-0052
2005-07 2008-09
0023-1526AAF 0023-1526AJF
To choose product finish, add the abbreviation to the end of the part number. Polished -P $449.95 Polished -P $147.00 Chrome -CH $499.95 Chrome -CH $165.00 Black Ano -B $499.95 Black Ano -B $165.00 Contrast Cut -BM $499.95
Works With:
Stock Disc
PM 1pc Disc
PM Image Disc
4 Piston Differential Bore Caliper & Bracket
PM 13” Disc
2000-03 Sportster Differential Bore
Calipers
Sportsters need love too, and this is just the brake for them! Utilizing our race proven 4 piston differential bore caliper mounted to a solid billet bracket provides the ultimate rear brake system for the popular Sportster. Use it with your stock disc or step up to one of our Image Series design matched stainless steel rotors. 2000-03 XL, XLH, XLS 137X4B CALIPER/BRACKET Caliper & Bracket 1288-0073
Bracket Only 0023-1526XU
To choose product finish, add the abbreviation to the end of the part number. Polished -P $499.95 Polished -P $147.00 Chrome -CH $549.95 Chrome -CH $165.00 Black Ano -B $549.95 Black Ano -B $165.00 Contrast Cut -BM $549.95
Works With:
Stock Disc
PM 1pc Disc
PM Image Disc
4 Piston Caliper & Bracket
PM 13” Disc
1984-99 Sportster
This compact designed 4 piston caliper and bracket is the very best brake system for your sportster. Easy bolt-in installation and maintenance. Use it with your stock disc or step up to one of our Image Series design matched stainless steel rotors. 1984-99 XL, XLH, XLS
125X4RSPH CALIPER/BRACKET Caliper & Bracket 1264-0052
Bracket Only 0023-1526FF
To choose product finish, add the abbreviation to the end of the part number. Polished -P $449.95 Polished -P $147.00 Chrome -CH $499.95 Chrome -CH $165.00 Black Ano -B $499.95 Black Ano -B $165.00 Contrast Cut -BM $499.95
Works With:
Stock Disc
PM 1pc Disc
PM Image Disc
PM 13” Disc
29
4 Piston Classic Caliper & Bracket
Rear Brakes Square Swingarm FX & FL Models
This was the brake system that put PM on the map! 4 Piston braking power with top mount, bottom anchor bracket makes for easy installation. PM recommends increasing disc size from 10” to 11.5” for more braking power. 1973-1983
1973-1983
FX, FXE, FXEF, FXWG, FXB, FXS, FXSB all models
FLH, FLHS, FLHF Stock Rear disc is 10” or 11.5” all models
125X4R CALIPER/BRACKET - 10” STOCK DISCS
Caliper & Bracket 10” Stock Disc 1254-0052
Works With:
Bracket Only 10” Stock Disc
0024-0026CJ
125X4R CALIPER/BRACKET - 11.5” STOCK DISCS Stock Disc
PM 1pc Disc
PM Image Disc
PM 13” Disc
Caliper & Bracket 11.5” Stock Disc 1255-0052
Bracket Only 11.5” Stock Disc 0024-1526DJ
To choose product finish, add the abbreviation to the end of the part number. Chrome -CH $429.95 Chrome -CH $89.00 Black Ano -B $429.95 Contrast Cut -BM $429.95
6 Piston Differential Bore Caliper & Bracket
Custom
6 Piston braking power provides the best there is for the custom builder. Select caliper for 11.5” or 13” and bracket. Universal application: Fabrication is necessary to anchor bracket to frame. PM does not supply axle spacers or anchor assembly with kit. Anchor assembly ordered separately. Page 18. All Years 3/4” axle, Right side only
112X6B CALIPER/BRACKET - 11.5” DISCS Caliper Only
Bracket Only
11.5” Stock Disc 0051-2910
11.5” Stock Disc 0023-1526AU
125X4R CALIPER/BRACKET - 13” DISCS Caliper Only
13” Stock Disc
PM 1pc Disc
PM Image Disc
13” Stock Disc
0023-1526AU
To choose product finish, add the abbreviation to the end of the part number. Polish -P $449.95 Polish -P $129.00 Chrome -CH $499.95 Chrome -CH $149.00 Black Ano -B $499.95 Black Ano -B $149.00 Contrast Cut -BM $499.95
Works With:
Stock Disc
Bracket Only
0051-2914
PM 13” Disc
4 Piston Classic Caliper & Bracket
Rear Brakes Custom
Bracket is bottom mount universal, includes anchor rod and weld on tab. This is also the best set up for right side drive customs. PM recommends increasing disc size from 10” to 11.5” for more braking power. All Years for Disc Brake Wheels and right side drive customs 125X4R CALIPER/BRACKET - 10” DISCS Caliper & Bracket
1271-0052
0023-0086AG
Bracket Only
To choose product finish, add the abbreviation to the end of the part number. Polish -P $449.95 Polish -P $79.00 Chrome -CH $499.95 Chrome -CH $89.00 Black Ano -B $499.95 Black Ano -BM $89.00 Contrast Cut -BM $499.95 125X4R CALIPER/BRACKET - 11.5” DISCS Caliper & Bracket
Bracket Only
1272-0052 1272-0052-1
3/4” Axle 1.0” Axle
3/4” Axle 1.0” Axle
0023-1586AG 0023-1586AG-1
To choose product finish, add the abbreviation to the end of the part number. Polish -P $449.95 Polish -P $147.00 Chrome -CH $499.95 Chrome -CH $165.00 Black Ano -B $499.95 Black Ano -B $165.00 Contrast Cut -BM $499.95
Works With:
Stock Disc
PM 1pc Disc
PM Image Disc
PM 13” Disc
4 Piston Radial Caliper & Bracket Radially mounted calipers are stiffer than traditional mountings, and will hold alignment with the rotor much better. The result is better pad contact with your disc, better braking and minimized heat. Includes spacer for 3/4” and 1” axles. Requires anchor rod and weld on tab
RADIAL MOUNT CALIPER & BRACKET Caliper & Bracket
Caliper & Bracket
Left Side
0052-4003
Right Side
0052-4002
Anchor Rod
0028-9908
Weld on tabs
0027-9951 Works With:
To choose product finish, add the abbreviation to the end of the part number. Polish -P $699.95 Black Ano -B $749.95 Chrome -CH $749.95 Contrast Cut -BM $749.95 Stock Disc
To Order please call 1-800-479-4037 or visit www.performancemachine.com
PM 1pc Disc
PM Image Disc
PM 13” Disc
30
Hand &
Foot Controls
33
Contour Forward Controls
New 2009
Contour Forward Controls The 11/16� Contour master cylinder integrates racing technology in both the push rod and piston for less effort at the pedal. Contour Forward Controls are designed to work with PM Brake Systems as well as OEM and other aftermarket brakes. Now available for both stock kickstands and customs that use frame mounted kickstand (Left side does not have bracket or mounting holes for OEM style kickstand) for a clean smooth look. Brake Pedal Assembly: Forward mount brake pedal is manufactured from billet aluminum with stainless steel shaft for strength and long life. The brake pedal is mounted forward of the foot pedal for ease of use and is fully adjustable. Arms ride on Teflon bearings for a perfectly smooth, corrosion free operation. Shift Pedal Assembly: Manufactured from billet aluminum and stainless steel. The shift lever is fully adjustable, rides on Teflon bearings and utilizes the stock HD kickstand and return spring. Foot Pegs: The Round style and original Contour foot pegs are uniquely designed for comfort and style. The new easy to replace rubber inserts provide a non-slip surface and protect the pegs. The pivot is completely redesigned and is now polished stainless steel. Foot Pedals: The rubber inserts and rubber wrapped pedals provide a non slip surface and protect the pedals. The brake side pedal is mounted forward of the foot peg for immediate braking response without lifting your foot from the foot peg and is fully adjustable. Master Cylinder: The Contour master cylinder is designed to match our handlebar controls and features an 11/16�piston for the ultimate in braking power and feel.
34
Contour Forward Controls Softail ®
2” Extended for Softail ®
W/Contour Pegs & Pedals (pictured)
Softail To 1999 0035-0040
W/Contour Pegs & Pedals (pictured)
Softail 2000-2009 0035-0041
Softail To 1999 0035-0043
W/Round Pegs & Pedals
Softail To 1999 0035-0071
W/Round Pegs & Pedals
Softail 2000-2009 0035-0072
Softail To 1999 0035-0074
No Pegs - Minus $100.00
Softail To 1999 0035-0108
Softail 2000-2009 0035-0073
No Pegs - Minus $100.00
Softail 2000-2009 0035-0109
Utlizes stock Kickstand, includes new Kickstand Bracket. 2007-2008 Requires 2006 side stand and hardware.
$1099.95 $1199.95 $1199.95 $1199.95
Polished Chrome -CH Black Ano -B Contrast Cut -BM
Softail 2000-2009 0035-0042
V-Rod ®
Softail To 1999 0035-0110
Softail 2000-2009 0035-0111
Utlizes stock Kickstand, includes new Kickstand Bracket. 2007-2008 Requires 2006 side stand and hardware.
$1099.95 $1199.95 $1199.95 $1199.95
Polished Chrome -CH Black Ano -B Contrast Cut -BM
Custom (No Kickstand Holes)
Utilzing the proven PM Contour control arms and pegs, we have updated them to work with the V-Rod’s simplistic mounting pivots and created a stylish and functional upgrade for your V-Rod ®.
Designed for custom chassis, these are identical to the standard PM Contour controls without the kickstand bracket and holes. W/Contour Pegs & Pedals (pictured) W/Round Pegs & Pedals
0035-0045
0035-0075
W/Round Pegs & Pedals
0035-0080
W/Round Pegs & Pedals
0035-0107
New
$1099.95 $1199.95 $1199.95 $1199.95
Polished Chrome -CH Black Ano -B Contrast Cut -BM
$599.95 $699.95 $699.95
Polished Black Ano -B Chrome -CH
0035-0106
Polished Chrome -CH Black Ano -B Contrast Cut -BM
0035-0044
W/Contour Pegs & Pedals (pictured)
Dyna ® 1991-2005
W/Contour Pegs & Pedals (pictured)
$1099.95 $1199.95 $1199.95 $1199.95
2009
Accessories for Contour Forward Controls Stock HD Replacement Pegs Designed for use with HD clevis style rider and passenger pegs New
2009
PM Classic Pegs
Contour Rubber Wrapped Pegs
Contour Pegs
Round Pegs
Rider and Passenger Pegs For use with stock HD clevis mount
Rider and Passenger Pegs For use with stock HD clevis mount
Rider and Passenger Pegs For use with stock HD clevis mount
Rider and Passenger Pegs For use with stock HD clevis mount
Polished 0035-0085 Chrome 0035-0085-CH
Chrome 0035-0083-CH $99.95 Black Ano 0035-0083-B $99.95
Polished 0035-0065 $169.95 Chrome 0035-0065-CH $179.95 Black Ano 0035-0065-B $179.95
Polished 0035-0076 $179.95 Chrome 0035-0076-CH $189.95 Black Ano 0035-0076-B $189.95
Passenger Pegs with folding piviot Passenger Pegs ONLY Requires removal of stock HD piviot
Passenger Pegs with folding piviot Passenger Pegs ONLY Requires removal of stock HD piviot
Polished 0035-0066 $189.95 Chrome 0035-0066-CH $199.95 Black Ano 0035-0066-B $199.95
Polished 0035-0077 $199.95 Chrome 0035-0077-CH $209.95 Black Ano 0035-0077-B $209.95
$139.95 $149.95
Contour Rubber Wrapped Shift Peg Fits shift arms with 5/16 - 24 thread
Chrome 0033-1083-CH $20.00 Black Ano 0033-1083-B $20.00 Chrome Plated Button Head Bolt Kit
Hex
Rubber Insert Kit for Classic pegs Pegs Polished 0035-9001 Chrome 0035-9001-CH Pedals Brake and shifter 0035-9002
$39.95 $49.95 $19.95
0109-1021
$7.00
Rubber replacement kits
Toe Pedal Spacers
Extend your shifter & brake pedal out 1/2”. Ride Comfortable Polished 0018-0003 Chrome 0018-0003-CH Black Ano 0018-0003-B
$9.50 $10.50 $10.50
Contour Peg ( big ) Contour Pedal ( small ) Round Peg ( big ) Round Pedal ( small ) Rubber Wrapped Peg Rubber Wrapped Pedal
0035-9006 $15.00 0035-9007 $9.50 0035-9010 $9.50 0035-9009 $9.50 0031-1087 $5.00 0033-1084 $3.00
35
Contour Mid-Mount Controls
Contour Mid-Controls More and more popular with the custom builder, mid controls have become the choice of top builders. With our Contour Belt Drive Primary and Clutch Housing as mounting points, the next logical step for the PM Contour Foot Controls was right in the middle! Beginning with our proven master cylinder, we created intricate brackets that mount within the Primary on the left and either integrate into the PM Contour Clutch Housing on the right or for you right side drive guys, we created a complete unitized hydraulic master cylinder and brake control. Offered in two different peg designs and three finishes to match your custom. Requires PM Contour Primary (page 36) and Hydraulic clutch housing (page 38) to install.
2000-2005 - Twin Cam Dyna 2000-2006 - Twin Can Softail 1991-1999 - EVO Softail & Dyna with stock HD Trans.
2007-2009 Twin Cam Softail 2006-2009 Twin Cam Dyna
1991-1999 EVO with Baker Trans Standard left side drive N Mid -Year Realease
ew
2009
Right SIde Drive bike Includes Shift and Brake Controls (requires Baker RSD style transmission)
Round pegs Knurled pegs
0035-0103 0035-0102
Round pegs Knurled pegs
0035-0112 0035-0113
Round pegs Knurled pegs
0035-0114 0035-0115
Round pegs Knurled pegs
0035-0101 0035-0100
Polished Black Ano -B Chrome -CH
$1399.95 $1499.95 $1499.95
Polished Black Ano -B Chrome -CH
$1399.95 $1499.95 $1499.95
Polished Black Ano -B Chrome -CH
$1399.95 $1499.95 $1499.95
Polished Black Ano -B Chrome -CH
$1699.95 $1799.95 $1799.95
To Order please call 1-800-479-4037 or visit www.performancemachine.com
Knurled pegs
Contour Belt Drive Primary
36
Contour Belt Drive Primary The PM Contour Belt Drive Primary has several key features that make it superior to other belt drives. The motor plate and lock up clutch are designed to tolerate the power of big motors. Clutch action at the lever is eased by use of lower rate springs, while the inertia activated lock up feature keeps things from slipping when the power is poured on. Completely replaces the stock primary and utilizes a narrow belt for lightweight, better cornering clearance and does not interfere with access to forward controls. Designed to integrate seemlessly with PM Mid Mount Controls. Will fit all 1991 through 2009 HD Softails, Dynas and many customs. Does not fit FLH or FXR models. Dyna models must use forward controls or the integrated PM mid Mounts on page 35. The Primary is available in chrome and Contrast Cut finishes. The Contrast Cut finish features a blacked out primary integrated with machined Contrast Cut covers and the same quality internals. 91-06 Softail - 91-05 Dyna
Chrome Contrast Cut
0179-1904-CH $2799.95 0179-1904-BM $2799.95
07-09 Softail - 06-09 Dyna
Chrome Contrast Cut
0179-1906-CH $2799.95 0179-1906-BM $2799.95
91-06 Softail with PM Phatail pg. 91
07-09 Softail with PM Phatail pg. 91
Includes offset kit for use with wide tire application
Includes offset kit for use with wide tire application
Chrome Contrast Cut
0179-1905-CH $2999.95 0179-1905-BM $2999.95
Chrome Contrast Cut
0179-1907-CH $2999.95 0179-1907-BM $2999.95
New
Rocker 08-09 Mid-Year Release
Chrome Contrast Cut
200 9
0179-1908-CH 0179-1908-BM
37
Contour Floorboards
Floorboards Performance Machine’s Contour Floorboards compliment any touring bike. We started with machined aluminum boards, added our own billet hinges and topped it off with our a unique rubber pad. Once we had them on a bike it became obvious the factory pedals and arms needed an upgrade, too. On the shift side, we utilized our already proven Contour pedals, and created contour machined aluminum arms (can be used toe/heal or toe only). The brake side gets a matched arm, and is topped with an easy to reach platform style pedal with its own rubber pad. Naturally we also created matched passenger boards for the rear. Floorboards are available in chrome and black ano finish. Levers are available in chrome, black ano, and Contrast Cut.
Rider FloorBoards ( fits 83-09 FL models, FLST ) Includes right & left floorboards, bolts to stock mounts. Chrome 0036-1000-CH $399.95 Black Ano 0036-1000-B $399.95
Brake Lever (fits 97-07 FL models, 87-09 FLST) Includes machined aluminum brake Lever & pad Chrome 0032-1080-CH $149.95 Black Ano 0032-1080-B $149.95 Contrast Cut 0032-1080-BM $149.95
Shift Lever & Spacer (fits 83-09 FL models, 00-09 FLST) Includes machined aluminum shift lever & spacer if using toe shifter only. Chrome 0034-1080-CH $139.95 Black Ano 0034-1080-B $139.95 Contrast Cut 0034-1080-BM $139.95
Passenger FloorBoards (fits 93-09 FL models) Includes right & left floorboards, bolts to stock mounts. Chrome 0036-1001-CH $349.95 Black Ano 0036-1001-B $349.95
Brake Lever (fits 08-09 FL models) Includes machined aluminum brake Lever & pad Chrome 0032-1081-CH $149.95 Black Ano 0032-1081-B $149.95 Contrast Cut 0032-1081-BM $149.95
Shift Levers & Spacer (fits 83-09 FL models, 00-09 FLST) Includes 2 machined aluminum shift levers & spacer if using both toe/heel Chrome 0034-1081-CH $269.95 Black Ano 0034-1081-B $269.95 Contrast Cut 0034-1081-BM $269.95
FLHX Requires factory passenger floorboard bracket.
New 2009
Contour Clutch Housings
Rear Master Cylinder
38
The Performance Machine rear brake master cylinder is a direct replacement on a 2000-2007 FL models. Designed to work with Stock or PM brake calipers. 2000-2007 FLST, FLHT, FLHR, FLTR, FLHX
Rear Master Cylinder
0065-2903 To choose finish, add the below abbreviation to the end of the part number Polished $179.95 Black Ano -B $199.95 Chrome -CH $199.95 Contrast Cut -BM $199.95
Contour Hydraulic Clutch Slave Housings The PM Clutch Slave Cylinder is perfectly matched to the bore size of our Contour Master Cylinder for optimal clutch action. Left Side Drive housing includes dipstick. Right Side Drive Clutch Slave works with most Right Side Drive transmissions. Both require custom hydraulic lines.
5 Speed Housing for RSD Transmissions
Polished Chrome Black Ano
0066-2005 0066-2005-CH 0066-2005-B
$429.95 $449.95 $449.95
6 Speed Fluted Housing for HD ONLY 2007-09
Polished Chrome Black Ano
0066-2008 0066-2008-CH 0066-2008-B
$329.95 $349.95 $349.95
5 Speed Fluted Housing
Polished Chrome Black Ano
0066-2001 0066-2001-CH 0066-2001-B
5 Speed Smooth Housing
$329.95 $349.95 $349.95
Polished Chrome Black Ano
0066-2000 0066-2000-CH 0066-2000-B
$329.95 $349.95 $349.95
39
Contour Hand Controls
Contour Hydraulic Clutch Master Cylinder All PM clutch lever assemblies and clutch master cylinders are CNC machined from billet aluminum. Bore size is 11/16”. PM Clutch Master Cylinders now feature a hard anodized bore to eliminate wear. 2007’s and up HD’s require the use of Starter Interrupt Switch. Contour Hydraulic Clutch M/C
PM Starter Interrupt Switch. 11/16”
Pre-2007 Without Starter Interrupt switch 0062-2911 2007 and up Set up for Starter Interrupt switch
Polished Chrome Black Ano
Starter interrupt switch sold separately
Polished $349.95 Chrome -CH $369.95
Black Ano -B Contrast Cut -BM
0062-2917 $369.95 $369.95
0062-2916 0062-2916-CH 0062-2916-B
$45.95 $49.95 $49.95
Replacement Lever
Polished Chrome Black Ano
0062-1033 0062-1033-CH 0062-1033-B
Contour Clutch Lever Assemblies The PM Contour Clutch Lever and perch are perfectly matched to our master cylinder and switches. Works with stock cable. Will not work with HD switch housing. Assemblies (07 & up w/ starter interrupt switch included) 0062-2046 Assemblies ( Early ) Assemblies ( 84-06 )
Polished Chrome -CH Black Ano -B
$249.95 $269.95 $269.95
Replacement Lever ( 07 up ) Replacement Lever ( 84-06 )
Polished Chrome -CH Black Ano -B
0062-2031 0062-2030
$69.95 $89.95 $89.95
0062-1075 0062-1034
$69.95 $89.95 $89.95
Contour Hand Controls
40
Contour Hydraulic Brake Master Cylinder PM’s Contour machined brake master cylinder is a thing of beauty! The gracefully curved one piece body, and refined internals represent the very best in CNC artwork. Optional brake light switch can be ordered separately. Designed with the custom builder in mind, billet aluminum has never looked so good! 9/16” Bore (single caliper) 11/16” Bore (dual caliper)
Polished Chrome -CH Black Ano -B Contrast Cut -BM
Replacement Lever
Brake Light Switch, includes 36” Wire leads.
Contour Hydraulic Brake M/C
0062-2510 0062-2910
$349.95 $369.95 $369.95 $369.95
9/16” Bore (single caliper) 11/16” Bore (dual caliper)
0062-2612 0062-2912
Polished Chrome Black Ano
Polished $45.95 Chrome -CH $49.95 Black Ano -B $49.95
0062-1031 0062-1031-CH 0062-1031-B
$69.95 $89.95 $89.95
Contour Hand Control Complete Package Complete PM Contour Hand Control Package, includes Brake Master Cylinder (9/16” only), Clutch lever (Cable or Hydraulic) right & left 3 Button Switches, Brake Light Switch, Dual Cable Throttle Housing, Clutch Side Spacer, and even a set of our Contour Grips! Will not fit 2008-09 FLH. Package for cable clutch
Package for hydraulic clutch
Chrome 0062-4001-CH $1359.65 Black Ano 0062-4001-B $1359.65 Contrast Cut 0062-4001-BM $1359.65
Chrome 0062-4000-CH $1459.65 Black Ano 0062-4000-B $1459.65 Contrast Cut 0062-4000-BM $1459.65
Master Cylinder Bore Size Recommendations The correct master cylinder bore size is critical for effective braking. A smaller bore may increase line pressure (and therefore braking power), but it also may not move enough fluid to completely activate the pistons in your brake calipers. The feel of the brake system is also greatly effected by the bore size. An incorrect master cylinder can produce a stiff feel or on the opposite side of the spectrum, a mushy feeling lever. Each combination of PM calipers has been tested and a perfectly matched master cylinder is recommended in the chart at right.
PM CALIPER
SINGLE
DUAL
125X2
9/16”
9/16”
125X4R, S, SL
9/16”
11/16”
137X4, R, B
9/16”
11/16”
112X6B, RSB
9/16”
11/16”
41
Contour Hand Controls
Contour Switch Housings PM’s Billet Aluminum Switch Housings are a perfect compliment to the PM Contour Master Cylinders. Available as single button or three button switch units. Includes high quality switches with 36” leads. Retains blinkers, horn and high beam switches. Can be wired traditionally or hidden inside handlebars. Three Button Left Side - Use with Hydraulic Clutch Left Side - Use with Cable Clutch Right Side
Polished Chrome -CH Black Ano -B
0062-2033 0062-2035 0062-2032
$199.95 $229.95 $229.95
Single Button
0062-2036 0062-2034
Left Side Right Side
PM 3 Button Switch housings are designed to work exclusively with the PM Contour hand controls and may not work with other manufacturers hand controls.
Polished Chrome -CH Black Ano -B
$129.95 $149.95 $149.95
Contour Hand Control Spacers and Replacement Parts The Contour Hand Control Spacers are designed to fill the unsightly gap between the switch housing and the grip. The PM Fat Bar Adapters are designed for both right and left side applications and allow the use of PM Hand Controls on most models of 1.25” handlebars. Some handlebars may require slight filing for proper fitment. 1” Bar - Clutch Side Spacer: Cable 1/2” long 1” Bar - Clutch Side Spacer: Hydraulic 1” Long
Polished -P Chrome -CH
$15.00 $20.00
Black Ano -B
0011-0500MP 0011-1000MP $20.00
1.25” Bar - Fat bar Spacer: left side for cable clutch
Chrome
0011-0751MP
Replacement Switches
$25.00
1.25” Bar - Fat bar Spacer: R or L side W/Hydraulic clutch
Chrome
0011-0750MP
Hi-Lo Turn, Horn, Start Kill
0042-0003 0042-0002 0042-0001
$8.99 $8.99 $8.99
Replacement Button
$25.00
Black Cap
To Order please call 1-800-479-4037 or visit www.performancemachine.com
0062-1045
$2.50
Contour FL Hand Controls
Contour FL Switch Housings
The popularity of on-board audio systems prompted us to offer our Contour Switches with a matched audio housing. Now, even baggers with tunes can upgrade to the PM Contour hand Controls (options include, 9/16� or 11/16� master cylinders, cable or hydraulic clutch, throttle housing and matched grips) without sacrificing the convenience of having stereo and cruise control switches within reach. The PM Touring Edition Switch Housing utilizes the OEM stereo and cruise control switches for a simple install and ease of use. Four Button: Left Side - Use with Hydraulic Clutch 0062-2041 Four Button: Left Side - Use with Cable Clutch
0062-2044
Five Button: Left Side - Use with Hydraulic Clutch 0062-2043 Five Button: Left Side - Use with Cable Clutch
Polished Chrome -CH Black Ano -B
0062-2045
$299.95 $329.95 $329.95
Four Button: Right Side Five Button: Right Side
Polished Chrome -CH Black Ano -B
$299.95 $329.95 $329.95
0062-2040 0062-2042
42
43
Contour Grips and Throttle Housings
PM Grips
or New FF L
B
2009
A
C
The PM line of grips will complete any handlebar set up. Available in three designs and matched perfectly to the other Contour components, these are a must have for any rider. PM offers two versions of our grips wrapped in Renthal rubber, our standard Contour Grip and the XL Contour Grip with a slightly larger diameter and staggered rubber for a unique look and great comfort. The Contour Single Flute grips are available for those who prefer billet. A
B
Contour XL Grips Pre-2008 Standard Throttle ( pair )
Chrome Black Ano
0063-2010-CH 0063-2010-B
$149.00 $149.00
Contour XL Grips 2008 FLH
Chrome Black Ano
0063-2007-CH 0063-2007-B
$99.00 $99.00
Contour Single Flute Grips Standard Throttle ( pair ) Will not fit 2008 FLH
Polished Chrome Black Ano
0063-2006 0063-2006-CH 0063-2006-B
$129.00 $149.00 $149.00
Internal Throttle ( Left Side Only ) Will not fit 2008 FLH
0063-2018-CH 0063-2018-B
$149.00 $149.00
Contour XL Grips
Chrome Black Ano
0063-2004-CH 0063-2004-B
$49.95 $49.95
Contour Renthal Wrapped Grips 2008-09 FLH
Internal Throttle ( Left Side Only )
Chrome Black Ano
Standard Throttle ( pair ) Will not fit 2008 FLH
Contour Renthal Wrapped Grips
Electronic Throttle ( pair )
Chrome Black Ano
C
Contour Renthal Wrapped Grips
Electronic Throttle ( pair )
0063-2011-CH 0063-2011-B
$74.95 $74.95
Chrome Black Ano
0063-2020-CH 0063-2020-B
$139.95 $139.95
Note: When running an internal throttle order two left side grips.
Throttle Housings It’s hard to believe such a small part could make or break the look of your hand controls, but gloppy throttle housings have ruined the look of a fair share of bikes. We don’t want this to happen to you, so we created the Contour Housing, designed to perfectly match our Contour Master Cylinder and Switches. Available in Single Cable, Dual Cable and Dual Cable Snap in.
Single Cable Throttle Housing - Threaded Hole Single Cable Threaded Contour Housing. For use with threaded single cable pull carbs.
0063-2000
Dual Cable Throttle Housing - Threaded Hole Dual Cable Threaded Contour Housing. For use with threaded dual cable push pull carbs.
0063-2001
Dual Cable Throttle Housing - Snap In Cable 0063-2002 Dual Cable Snap in Housing for Stock Cables. For use with Stock HD snap in throttle cables. 2008-09 FLH Throttle Housing - Electronic Electronic. No use of throttle cables, no holes. For use with 2008 FLH Only.
Polished -P Chrome -CH Black Ano -B
$79.95 $89.95 $89.95
To Order please call 1-800-479-4037 or visit www.performancemachine.com
0063-2013 Throttle cable thread sizes are 5/16 X 18 & 1/4 X 20
Torque Mirrors
Left Side Right Side
Polished Chrome -CH Black Ano -B
0064-2007 0064-2006
Contour Mirrors
44
Constant improvement has always been the foundation of PM’s R&D department and the Torque Mirror is a perfect example of that dedication to progress. The completely unique shape of the mirror head would have been enough for most designers, but the PM guys took it a few steps further and integrated the profile into the stem as well. Bolts to all PM hand controls, as well as stock and many other aftermarket controls.
$119.95 $129.95 $129.95
FL Touring Mirrors Fits 1996 and up FLHT, FHTC, FLHTCU, 2006 and up FLHX
The faired Touring Models have an ideal location for a mirror to tuck out of the way and still provide an excellent rear view. We’ve taken that concept a few steps further with our machined aluminum Contour Touring Edition Mirrors. Designed for optimal view, while still flowing perfectly with the lines of the fairing. Includes complete mounting system and drill guide for easy installation. Chrome Black Ano
0064-2010-CH 0064-2010-B
Pair $249.95 $249.95
Touring Accessories
47
Contour Touring Edition
Fuel Doors Fits 1992-2009 Electra Glide速, Tour Glide, Road Glide速, and Street Glide models
New 2009
New 2009 Smooth 1992-07
Chrome 0200-0001-CH Black Ano 0200-0001-B
Fluted 1992-07
$95.95 $95.95
Smooth 2008-09
Chrome 0200-0008-CH Black Ano 0200-0008-B
Chrome Contrast Cut
0200-0002-CH 0200-0002-BM
$119.95 $119.95
Fluted 2008-09
$95.95 $95.95
Chrome Contrast Cut
0200-0007-CH 0200-0007-BM
$119.95 $119.95
PM Fuel doors are offered in a recessed smooth version and a fluted style to match the look of your bike and designed to install easily. Machined from billet aluminum and available in chrome, black ano, and Contrast Cut finishes, the Contour Gas Door is the finishing touch to any well sorted bagger.
Speaker Covers 1996 and Later All Electra Glide and Street Glide Models
New 2009
Bezel Covers
Chrome
0201-2001-CH
Fluted Covers
$129.95
Chrome Black Ano
0201-2000-CH $199.95 0201-2000-B $199.95
The popularity of on-bike audio systems inspired us to do a little something extra with the highly visible speakers. We started with a simple and clean Bezel style trim to accent the existing gauge bezels, and then kicked it up a bit with the fluted version. Either look is a welcome addition of chrome, or black ano to an otherwise dull dash. Requires removal of outer fairing for installation.
Contour Touring Edition
Latch Covers
48
Fits ‘93-later Touring models
New 2009
Fluted Pair
Chrome 0200-2001-CH $149.95 Contrast Cut 0200-2001-BM $149.95
Smooth Pair
Chrome
0200-2000-CH
$149.95
Often overlooked, but highly visible component of the beloved bagger is the bag latch itself. PM has machined two unique styles of latch covers to match your bike. We ‘ve used the OEM locking mechanism too! Easy too install with basic tools. The Fluted version is now available in Contrast Cut Finish.
Image Series Components
51
PM Image Series Discs (Explained)
Disc Carrier Outer Band
All PM Image Discs use a machined aluminum carrier. 11.5” & 300mm discs are bolted to the outer band and 13” discs are attached via floating elements. The carrier is perfectly matched to its respective wheel and will have a bolt pattern specific to the front or rear.
All PM Discs use a stainless steel outer band. PM utilizes a high grade 420 stainless that will not gaul or squeal like lesser quality discs. The newest version PM outer bands can be removed and replaced once worn.
Disc Register
Bolt Pattern
Different years and wheels sizes utilize a variety of register sizes. early model HD’s to 1999 have a 1.985” I.D., 2000 and newer use a 2.22” I.D. and 5.5” and wider PM wheels use a 2.5” I.D. (to accommodate larger wheel bearings).
All front Image discs are drilled for standard HD bolt pattern. 3 1/4” x 5 bolt x 5/16” All rear Image discs are drilled for HD bolt pattern. 3 1/4” x 5 bolt x 3/8” Victory Image discs are drilled for standard Victory 6 Bolt pattern. 3 1/2” x 6 bolt x M8
How to order your PM Image Series Discs: Always specify applications for front or rear when ordering. For dual disc fronts, order one right and one left. For most single disc fronts, order one left. For rear Big Twin, order one right. Springer applications must use PM Button Head Torx Bolts PM Image Series Discs WILL NOT work with 1999 & earlier HD Calipers or stock HD wheels.
All front discs are drilled for HD bolt pattern. 3 1/4” x 5 bolt x 5/16” counterbored with 2.22 I.D. A reducer spacer is included with each disc for use on 1999 and earlier 1.985” disc registers. All rear discs are drilled for HD bolt pattern. 3 1/4” x 5 bolt x 3/8” counterbored with 2.22 I.D. A reducer spacer is included with each disc for use on 1999 and earlier 1.985” disc registers. All Rear discs for set up for PM DRIVESIDE BRAKES are 3 1/4” x 5 bolt x 29/64” and utilize a 2.375” I.D. All Rear discs for 99 & Earlier, as well as most custom application WIDE WHEELS (5.5” and larger) are 3 1/4” X 5” X 3/8” and utilize a 2.5” I.D. 11.5” discs are solid mounted and centers are available in polished and chrome finishes as well as Contrast Cut, Contrast Cut Platinum, and Contrast Cut Stealth on select styles. 13” rotors have silent floaters and centers are available in polished finishes as well as Contrast Cut, Contrast Cut Platinum, and Contrast Cut Stealth on select styles. 300mm discs are for use on 2008-09 FLH models, 2006-09 VRSC models, 2006-09 Dyna models front rotors and all Victory models . All 300mm discs are solid mounted and centers are available in polished, chrome, Contrast Cut, Contrast Cut Platinum, Contrast Cut Stealth finishes. Specify your option when ordering. Victory models use a universal 300mm disc witch can be used for both front and rear applications.
52
Image Series Discs Front
11.5” & 300mm Image Disc
Polished Carrier (shown) Chrome Carrier -CH Contrast Cut -BM Platinum Cut -BMP Stealth Cut -BMS
CLASSIC FULL FLOATING DISCS
11.5” Full Floating 0133-1525S-P 13” Full Floating 0133-3058S-P A Polished Inner with Silent Floaters
$299.95 $329.95 $329.95 $329.95 $329.95
CLASSIC 1 PIECE DISCS
Platinum Cut - Heathen and Torque Only Stealth Cut - Factor Only
I.D. Size: 1.985 0131-0014S I.D. Size: 2.400 0131-0012S I.D. 1.985 & 2.22 0133-1563
10” 1 Pc Stainless 10” 1 Pc Stainless 11.5” 1 Pc Stainless
13.0” Image Disc
$429.95 $439.95 $449.95 $439.95
Polished Carrier Contrast Cut -BM Platinum Cut -BMP Stealth Cut -BMS
$399.00 $399.95
$129.00 $195.00 $195.00
Spacer required for 2000-up applications
0012-0227QN 0012-0225QN
Without speedo slot With speedo slot
$10.50 $10.50
Numbers are for Front Stainless outer and polished inner. 11.5” IMAGE DISC LEFT SIDE
300MM IMAGE DISC HD
RIGHT SIDE
LEFT SIDE
13.0” IMAGE DISC HD
RIGHT SIDE
LEFT SIDE
300mm IMAGE DISC for VICTORY
RIGHT SIDE
LEFT SIDE
RIGHT SIDE
Cartel
0133-1522CARLS 0133-1522CARRS 0133-1800CARLS 0133-1800CARRS 0133-3015CARLS 0133-3015CARRS
N/A
N/A
Domino
0133-1522DOMS
0133-1522DOMS
0133-1800DOMS
0133-1800DOMS
0133-3015DOMS
0133-3015DOMS
N/A
N/A
El Dorado
0133-1522ELDS
0133-1522ELDS
0133-1800ELDS
0133-1800ELDS
0133-3015ELDS
0133-3015ELDS
N/A
N/A
Factor
0133-1522FACLS
0133-1522FACRS
0133-1800FACLS
0133-1800FACRS
0133-3015FACLS
0133-3015FACRS
N/A
N/A
Gasser/Gatlin
0133-1522GATS
0133-1522GATS
0133-1800GATS
0133-1800GATS
0133-3015GATS
0133-3015GATS
0133-1803GATS
0133-1803GATS
Heathen
0133-1522HEAS
0133-1522HEAS
0133-1800HEAS
0133-1800HEAS
0133-3015HEAS
0133-3015HEAS
0133-1803HEAS
0133-1803HEAS
Hooligan
0133-1522HOOS
0133-1522HOOS
0133-1800HOOS
0133-1800HOOS
0133-3015HOOS
0133-3015HOOS
N/A
N/A
Judge
0133-1522JUDS
0133-1522JUDS
0133-1800JUDS
0133-1800JUDS
0133-3015JUDS
0133-3015JUDS
N/A
N/A
Rival
0133-1522RVLLS
0133-1522RVLRS
0133-1800RVLLS
0133-1800RVLRS
0133-3015RVLLS
0133-3015RVLRS
N/A
N/A
Riviera
0133-1522RIVS
0133-1522RIVS
0133-1800RIVS
0133-1800RIVS
0133-3015RIVS
0133-3015RIVS
0133-1803RIVS
0133-1803RIVS
Roulette
0133-1522ROUS
0133-1522ROUS
0133-1800ROUS
0133-1800ROUS
0133-3015ROUS
0133-3015ROUS
N/A
N/A
Torque/Strut
0133-1522TORLS
0133-1522TORRS
0133-1800TORLS
0133-1800TORRS
0133-3015TORLS
0133-3015TORRS
0133-3015TORLS
0133-3015TORRS
Wrath
0133-1522WRAS
0133-1522WRAS
0133-1800WRAS
0133-1800WRAS
0133-3015WRAS
0133-3015WRAS
N/A
N/A
Add -CH at end of part number for Chrome - Add -BM at end of part number for Contrast Cut - Add -BMP at end of part number for Platinum Cut (Heathen and Torque ONLY) Add -BMS at end of part number for Stealth Cut (Factor ONLY)
Rear 11.5” & 300mm Image Disc
$299.95 $329.95 $329.95 $329.95 $329.95
Polished Carrier (shown) Chrome Carrier -CH Contrast Cut -BM Platinum Cut -BMP Stealth Cut -BMS Platinum Cut - Heathen and Torque Only Stealth Cut - Factor Only
CLASSIC FULL FLOATING DISCS 11.5” Full Floating
0133-1528S-P $399.95
A Polished Inner with Silent Floaters CLASSIC 1 PIECE DISCS 11.5” 1 Pc Stainless
I.D. 1.985 &2.22 0131-1561
$199.00
Spacer required for 2000-up applications
Without speedo slot
0012-0227QN
$10.50
Numbers are for Rear Stainless outer and polished inner. 11.5” IMAGE DISC HD DRIVE SIDE BRAKE
300mm IMAGE DISC HD
RIGHT REAR
STANDARD BRAKE
RIGHT REAR
STANDARD BRAKE
STANDARD HD
2.50 I.D. FOR WIDE PM WHEELS
STANDARD HD
2006-09 V-ROD
300mm IMAGE DISC for VICTORY LEFT SIDE
Cartel
0133-1526CARLS
0133-1523CARRS
0133-1513CARRS
0133-1802CARRS
0133-1801CARRS
N/A
Domino
0133-1526DOMS
0133-1523DOMS
0133-1513DOMS
0133-1802DOMS
0133-1801DOMS
N/A
El Dorado
0133-1526ELDS
0133-1523ELDS
0133-1513ELDS
0133-1802ELDS
0133-1801ELDS
N/A
Factor
0133-1526FACLS
0133-1523FACRS
0133-1513FACRS
0133-1802FACRS
0133-1801FACRS
N/A
Gatlin/ Gasser
0133-1526GATS
0133-1523GATS
0133-1513GATS
0133-1802GATS
0133-1801GATS
0133-1803GATS
Heathen
0133-1526HEAS
0133-1523HEAS
0133-1513HEAS
0133-1802HEAS
0133-1801HEAS
0133-1803HEAS
Hooligan
0133-1526HOOS
0133-1523HOOS
0133-1513HOOS
0133-1802HOOS
0133-1801HOOS
N/A
Judge
0133-1526JUDS
0133-1523JUDS
0133-1513JUDS
0133-1802JUDS
0133-1801JUDS
N/A
Rival
0133-1526RVLLS
0133-1523RVLRS
0133-1513RVLRS
0133-1802RVLRS
0133-1801RVLRS
N/A
Riviera
0133-1526RIVS
0133-1523RIVS
0133-1513RIVS
0133-1802RIVS
0133-1801RIVS
0133-1803RIVS
Roulette
0133-1526ROUS
0133-1523ROUS
0133-1513ROUS
0133-1802ROUS
0133-1801ROUS
N/A
Torque/Strut
0133-1526TORLS
0133-1523TORRS
0133-1513TORRS
0133-1802TORRS
0133-1801TORRS
N/A
Torque/Strut Wrath
Right Side Drive
0133-1526TORRS
N/A
0133-1513TORLS
N/A
0133-1801TORLS
0133-1803TORLS
0133-1526WRAS
0133-1523WRAS
0133-1513WRAS
0133-1802WRAS
0133-1801WRAS
N/A
Add -CH at end of part number for Chrome - Add -BM at end of part number for Contrast Cut - Add -BMP at end of part number for Platinum Cut (Heathen and Torque ONLY) Add -BMS at end of part number for Stealth Cut (Factor ONLY)
53
PM Image Series Discs
Cartel
Domino
Gatlin/Gasser
Heathen
New 2009
Rival
New 2009
Riviera
Wrath
New 2009
Factor
El Dorado
Hooligan
Judge
Torque/Strut
Roulette
Classic One-Piece
Classic Full Floating
PM Image Series Discs
54
55
PM Belt Sprockets
The Image Series Forged Aluminum Belt Sprocket has long been a favorite of the custom builder and enthusiast, its finely machined surface perfectly mirrors the pattern of the PM wheel behind it for a complete custom look. Limited styles are available for the new V-ROD, and are designed to work with stock cush drive. PM Pulleys now feature Hard Anodized teeth for longer wear. PM Belt Sprockets will not work on Sportsters PM Belt Sprocket for 2000 - 2005 Softail includes custom bolts All PM Belt Sprockets work with stock or PM wheels. Use with a stock HD wheel does not guarantee alignment with wheel pattern. Part Numbers BELOW are for Polished Belt Sprockets 2009 FL Universial Belt Sprocket
Chrome Contrast Cut
0093-7268UNVL-CH 0093-7268UNVL-BM
PM Belt Sprocket
Polished Chrome Contrast Cut Platinum Cut Stealth Cut
Retail $319.95 $299.95
PM Belt Sprocket For V-Rod
Retail $549.00 $599.00 $579.00 $629.00 $599.00
Polished Chrome Contrast Cut Platinum Cut Stealth Cut
Retail $579.00 $649.00 $599.00 $679.00 $649.00
Model Dyna Dyna Dyna Dyna
Year 1991-99 2000-05 2006 2007-09
Width 1.5” 1.125” 1.125” 1.0”
Tooth Cnt. 70 Tooth 70 Tooth 70 Tooth 66 Tooth
Version
FXR FXR
1984-99 2000-03
1.5” 1.125”
70 Tooth 65 Tooth
FLH FLH FLH FLH FLH
1984-99 2000-03 2004-06 2007 2008-09
1.5” 1.5” 1.125” 1.0” 1.0”
70 Tooth 70 Tooth 70 Tooth 66 Tooth 66 Tooth
PM Series 6 PM Series 1 PM Series 3
PM
Phatail
1.125”
70 Tooth
PM Series 6
Softail Softail Softail Softail Softail Softail Softail Softail Softail
1984-92 1993 1994-99 2000-06 2006 200mm Tire 2007 150mm Tire 2007 200mm Tire 2008-09 150mm Tire 2008-09 200 mm Tire
1.5” 1.5” 1.5” 1.125” 20mm 1.0” 20mm 1” 20mm
70 Tooth 61 Tooth 65 Tooth 70 Tooth 70 Tooth 66 Tooth 66 Tooth 66 Tooth 66 Tooth
V-Rod V-Rod V-Rod
2002-06 2007 Except VRSCR 2008-09
1.375” 28mm 28mm
72 Tooth 72 Tooth 72 Tooth
PM Series 11 PM Series 12
Victory All models with 70-T
1.125”
70 Tooth
PM Series 13
PM Series 6 PM Series 8 PM Series 2
PM Series 7 PM Series 5 PM Series 9 PM Series 4 PM Series 10
PM Image Series Belt Sprockets Cartel
Domino
El Dorado
Factor
Gatlin Gasser
Heathen
Hooligan
Judge
Rival
Riviera
Roulette
Torque Strut
Wrath
1.0” 66 Tooth
5066CARL 5066DOML 5066ELDL
5066FACL 5066GATL 5066HEAL 5066HOOL 5066JUDL
5066RVLL
5066RIVL
5066ROUL 5066TORL 5066WRAL
1.0” 66 Tooth
5466CARL 5466DOML 5466ELDL
5466FACL 5466GATL 5466HEAL 5466HOOL 5466JUDL
5466RVLL
5466RIVL
5466ROUL 5466TORL 5466WRAL
1.0” 66 Tooth
6066CARL 6066DOML 6066ELDL
6066FACL 6066GATL 6066HEAL 6066HOOL 6066JUDL
6066RVLL
6066RIVL
6066ROUL 6066TORL 6066WRAL
1.0” 66 Tooth
6266CARL 6266DOML 6266ELDL
6266FACL 6266GATL 6266HEAL 6266HOOL 6266JUDL
6266RVLL
6266RIVL
6266ROUL 6266TORL 6266WRAL
1.0” 66 Tooth
5966CARL 5966DOML 5966ELDL
5966FACL 5966GATL 5966HEAL 5966HOOL 5966JUDL
5966RVLL
5966RIVL
5966ROUL 5966TORL 5966WRAL
1.5” 65 Tooth
0065CARL 0065DOML 0065ELDL
0065FACL 0065GATL 0065HEAL 0065HOOL 0065JUDL
0065RVLL
0065RIVL
0065ROUL 0065TORL 0065WRAL
1.5” 70 Tooth
0070CARL 0070DOML 0070ELDL
0070FACL 0070GATL 0070HEAL 0070HOOL 0070JUDL
0070RVLL
0070RIVL
0070ROUL 0070TORL 0070WRAL
1.125” 65 Tooth
0265CARL 0265DOML 0265ELDL
0265FACL 0265GATL 0265HEAL 0265HOOL 0265JUDL
0265RVLL
0265RIVL
0265ROUL 0265TORL 0265WRAL
1.125” 70 Tooth
0270CARL 0270DOML 0270ELDL
0270FACL 0270GATL 0270HEAL 0270HOOL 0270JUDL
0270RVLL
0270RIVL
0270ROUL 0270TORL 0270WRAL
1.125” 70 Tooth
1270CARL 1270DOML 1270ELDL
1270FACL 1270GATL 1270HEAL 1270HOOL 1270JUDL
1270RVLL
1270RIVL
1270ROUL 1270TORL 1270WRAL
1.125” 70 Tooth
3370CARL 3370DOML 3370ELDL
3370FACL 3370GATL 3370HEAL 3370HOOL 3370JUDL
3370RVLL
3370RIVL
3370ROUL 3370TORL 3370WRAL
72 Tooth
2772CARL 2772DOML 2772ELDL
2772FACL 2772GATL 2772HEAL
2772JUDL
2772RVLL
2772RIVL
2772ROUL 2772TORL 2772WRAL
20mm 66 Tooth
5266CARL 5266DOML 5266ELDL
5266FACL 5266GATL 5266HEAL 5266HOOL 5266JUDL
5266RVLL
5266RIVL
5266ROUL 5266TORL 5266WRAL
20mm 66 Tooth
6166CARL 6166DOML 6166ELDL
6166FACL 6166GATL 6166HEAL 6166HOOL 6166JUDL
6166RVLL
6166RIVL
6166ROUL 6166TORL 6166WRAL
20mm 70 Tooth
0570CARL 0570DOML 0570ELDL
0570FACL 0570GATL 0570HEAL 0570HOOL 0570JUDL
0570RVLL
0570RIVL
0570ROUL 0570TORL 0570WRAL
28mm 72 Tooth
5772CARL 5772DOML 5772ELDL
5772FACL 5772GATL 5772HEAL
N/A
5772JUDL
5772RVLL
5772RIVL
5772ROUL 5772TORL 5772WRAL
28mm 72 Tooth
6372CARL 6372DOML 6372ELDL
6372FACL 6372GATL 6372HEAL
N/A
6372JUDL
6372RVLL
6372RIVL
6372ROUL 6372TORL 6372WRAL
N/A
N/A
N/A
7470RIVL
PM Series 1
PM Series 2
PM Series 3
PM Series 4
PM Series 5
PM Series 6
PM Series 7
PM Series 8
1.375”
PM Series 9
PM Series 10
PM Series 11
PM Series 12
1.125” 70 Tooth
PM Series 13
N/A
N/A
N/A
N/A
7470GATL 7470HEAL
N/A
Part Number from above
0 09 3 -
N/A
7470TORR
N/A
Finish
-
Add -CH at end of part number for Chrome - Add -BM at end of part number for Contrast Cut - Add -BMP at end of part number for Platinum Cut (Heathen and Torque ONLY) Add -BMS at end of part number for Stealth Cut (Factor ONLY)
PM Belt Sprocket
New
Cartel
Cartel
Domino
El Dorado
Gatlin/Gasser
Gatlin/Gasser
Heathen
Heathen
New
Rival
Roulette
Hooligan
2009
Rival
Torque/Strut
Factor
New
2009
Judge
2009
Riviera
Torque/Strut
Riviera
Wrath
New 2009
2009 FL Universal Rear Cush Drive 68T X 24.0mm Pulleys
56
57
PM Image Series Chain Sprockets
Cartel
Cartel
Domino
El Dorado
Gatlin/Gasser
Gatlin/Gasser
Heathen
Heathen
New
Judge
Rival
Roulette
Torque/Strut
New 2009
Factor
Hooligan
New
2009
Rival
Riviera
Torque/Strut
Wrath
2009
Riviera
Sprockets are left side, flat & drilled for stock HD bolt pattern with 2.500 ID register. Made from aircraft grade 7075 T6 aluminum for use with 530 chain. For Contrast Cut finish add -BM to part number. For Platinum Cut finish add -BMP to part number for Heathen and Torque only. For Contrast Cut Stealth add -BMS to the end of the part number for Factor only. Polished
48 TOOTH
48 TOOTH
48 TOOTH
Big Twin
Sportster
Right Side Drive
Cartel
0090-0548CARL
0090-0548CARR
0090-0548CARR
Domino
0090-0548DOM
0090-0548DOM
0090-0548DOM
El Dorado
0090-0548ELD
0090-0548ELD
0090-0548ELD
Factor
0090-0548FACL
0090-0548FACR
0090-0548FACR
$199.95
Contrast Cut
$229.95
Platinum Cut
$229.95
Stealth Cut
$229.95
For stock Big Twin wheel hub, order Spacer Plate (part # 0124-0587) to reduce ID register to 1.985 and to offset sprocket. For PM 5.5 or wider wheels, sprocket will bolt directly to wheel (spacer plate not necessary) For Sportster, order Spacer Plate (part # 0124-0587) to reduce ID to 1.985 and to offset sprocket.NONDIRECTIONAL styles only.
STYLE
Gasser/Gatlin
0090-0548GATL
0090-0548GATL
0090-0548GATL
Heathen
0090-0548HEAL
0090-0548HEAL
0090-0548HEAL
Hooligan
0090-0548HOOL
0090-0548HOOL
0090-0548HOOL
Judge
0090-0548JUD
0090-0548JUD
0090-0548JUD
Rival
0090-0548RVLL
0090-0548RVLR
0090-0548RVLR
Riviera
0090-0548RIV
0090-0548RIV
0090-0548RIV
Roulette
0090-0548ROUL
0090-0548ROUR
0090-0548ROUR
Torque/Strut
0090-0548TORL
0090-0548TORR
0090-0548TORR
Wrath
0090-0548WRA
0090-0548WRA
0090-0548WRA
Sprocket Spacer Plate:Required in some applications to reduce I.D. to 1.985 and to offset sprocket 1/4� for proper chain alignment.
0124-0587
$35.00
58
PM Bolt Kits
Bolts for PM Discs
You wouldn’t use those stock bolts on your new PM parts would you??? We didn’t think so... Just to make sure you do not have any trouble finding truly custom hardware, we carry a complete line of Polished Stainless Steel 12 point bolts as well as Chromed Button Heads for PM discs, pulleys and sprockets. Bolt Kits for PM Front Discs Chrome Plated Button Head Torx Bolts:
Polished Stainless 12 Point Bolts:
Early Models 5/16” - 18 X 7/8”
0109-0011-CH Flat Head Bolts
$29.00
1984 & Up 5/16” - 18 X 7/8”
1984 & Up 5/16” - 18 X 7/8”
0109-0012-CH Button Head Torx
$15.00
PM 12 point bolts will not work with Narrow glide front ends.
Early FLH 0109-0013-CH 3/8” - 16 X 1” Cast Wheels Button Head Torx
$18.00
0109-0014-CH
$24.00
Early FLH
3/8” - 16 X 1” Wire Wheels
Button Head Torx
0109-0016-SS 12 Point Head
$29.00
Kits include 5 bolts. Order 2 for Dual Disc Applications.
Bolt Kits for PM Rear Discs Chrome Plated Button Head Torx Bolts:
Most Models 3/8” - 16 x 1”
0109-0013-CH Button Head Torx
Wire Wheels 0109-0014-CH 3/8” - 16 x 1” Button Head Torx & Lock Nuts
Polished Stainless 12 Point Bolts:
$18.00
Most Models 3/8” - 16 x 1”
0109-0017-SS $32.00 12 Point Head
$24.00
Wire Wheels 3/8” - 16 x 1”
0109-0018-SS $35.00 12 Point Head
Kits include 5 bolts.
Bolts for PM Belt Sprockets & Chain Sprockets Stock Belt Sprocket hardware is reminiscent of those seen on farm equipment and look especially out of place on a field of polished or chromed aluminum. We can fix that. Kits work with all PM Big Twin Pulleys.
Bolt Kits for PM Belt Sprockets (Pulleys) Chrome Plated Hex Head Bolts:
Polished Stainless 12 Point Bolts:
Hub Built pre 12-01 7/16” - 14 X 1.75”
Hub Built pre 12-01 0109-0054-CH
$24.00
7/16” - 14 X 1.75”
0109-0056-SS
Chrome Plated Hex Head Bolts:
Polished Stainless 12 Point Bolts:
Hub Built after 12-01
Hub Built after 12-01
7/16” - 14 X 2.00”
0109-0055-CH $24.00
Kits include 5 Bolts and 5 Washers
7/16” - 14 X 2.00”
0109-0057-SS
$39.95
$39.95
Kits include 5 Bolts and 5 Washers
Bolt Kits for PM Chain Sprockets Polished Stainless 12 Point Bolts:
Chrome Plated Hex Head Bolts:
All Models
All Models 7/16” - 14 X 1.25”
0109-0051-CH
Kits include 5 Bolts and 5 Washers
$19.00
7/16” - 14 X 1.25”
0109-0053-SS
$39.00
Kits include 5 Bolts and 5 Washers
To Order please call 1-800-479-4037 or visit www.performancemachine.com
Wheels
61
PM Image Series Wheels
New 2009
Riviera The Riviera features eight linear spokes for a simple, yet defined motorcycle wheel. The faceted spokes split into 16 before fusing back into the rim lip. The styling is carried all the way to the soft rim lip with custom grooves for a more intense look.
PM Image Series Wheels
62
New 2009
Riviera The Contrast Cut of the raw aluminum and black ano on the Riviera’s faceted spokes create a dramatic, yet classic look.
63
PM Image Series Wheels
New 2009
Rival The Rival possesses five radical, swept spokes for a sinister looking motorcycle wheel. Each spoke features unmatched detail with carved aluminum windows and protruding edges. The wild design and directional orientation of the wheel give the illusion of speed, even when it’s sitting still.
PM Image Series Wheels
64
New 2009
Rival The Contrast Cut Rival appears even more sinister than its chrome “Rival�. The Machine finish against the black ano on the detailed spokes is stunning.
65
PM Image Series Wheels
New 2009
Factor The Contrast Cut Stealth features an innovative, military grade anodized coating that is the most durable any motorcycle wheel has ever seen. The Stealth derived its name from the muted, matte black nature of the finish. The flat black finish on the five directional spokes is machined away exposing the raw aluminum to create a wheel that will do anything but escape observation. Speed dots increase the dimension of the ultra-smooth outer rim lip. The Contrast Cut Stealth finish is only available on the Factor wheel in 2009.
PM Image Series Wheels
66
Domino The Domino takes nine spokes off of the hub, splits them into 18 and then merges into the rim with our stylish speed dots. It’ll look right on any Harley or custom motorcycle.
67
PM Image Series Wheels
Heathen The Heathen wheel begins as 7 spokes and splits into 14 ornate tendrils before blending into the rim center and then follows with a complimentary design on the outer edge of the subtly curving rim face.
PM Image Series Wheels
PLATINUM
Heathen The Heathen wheel features PM’s innovative Contrast Cut Platinum finish where the exposed aluminum is meticulously polished to further increase the contrast and highlight the design of the wheel. This process is carried all the way out to the edge of the rim.
68
69
PM Image Series Wheels
Cartel Curvaceous is the only way to describe the Cartel wheel. Seven curved spokes advance from the hub, split into 14 spars before converging into PM’s beautifully arced Contour Rim Lip. The effect is pretty astonishing and gives the wheel a near liquid chrome appearance.
PM Image Series Wheels
Cartel PM has taken our distinctive Contrast Cut finish and applied it to the Cartel wheel. The combination of black and aluminum on the directional spokes give it a fast, aggressive look.
70
71
PM Image Series Wheels
Gasser The Gasser is five spokes of vintage styled elegance flowing smoothly into the rim. In fact, even the rim itself has been revamped with a Contour Rim Lip. The result is a graceful arc from spoke to tire.
PM Image Series Wheels
Gasser Our unique Contrast Cut finish is created with a combination of black anodizing and raw machined aluminum. The already classic lines of the Gasser are accentuated by the contrasting finishes resulting in a wheel like no other. Matching components are available.
72
73
PM Image Series Wheels
Torque The Torque is a directional wheel with 9 gracefully arced spokes, each terminating in a knife like profile at the rim. Looks fast even sitting still!
PM Image Series Wheels
74
New
PLATINUM
Finish 2009
Torque The Contrast Cut Platinum finish will take the Torque wheel to the next level in 2009. The contrast between the polished black ano and the polished aluminum on the spokes will leave you speechless.
75
PM Image Series Wheels
Strut The Strut is comprised of nine swept spokes that fan out and split before blending into the rim. In fact, even the rim itself has been revamped with our new soft lip. The result is a graceful arc from spoke to tire.
PM Image Series Wheels
76
Judge Taking a cue from the vintage street rod days, the Judge is 5 spokes of billet style. We’re looking forward to seeing this one on a few bobbers!
77
PM Image Series Wheels
El Dorado This design allows the wheel center to flare out before the spokes emerge, split and taper into the rim. Unbelievable detail is complimented by the unique spoke shape and PM Speed Dots.
PM Image Series Wheels
Roulette The Roulette spent over a year in the design phase just to create the wild spoke shape. It was no gamble that this wheel would come out truly wild!
78
79
PM Image Series Wheels
Gatlin An impressive design that proves what can be accomplished in carved aluminum. The spokes burst from the hub into a web before splitting into individual talons and meeting the rim.
PM Image Series Wheels
80
Hooligan The Hooligan is a study in machined aluminum detailing. Graceful arcs of aluminum split and fade off as the spoke terminates into the rim. Capped by a trio of speed dots beg for color matched paint to compliment your bike.
81
PM Image Series Wheels
Wrath This highly detailed 5 spoke wheel that will look at home on the cleanest of customs as well as any hardcore chopper. Each spar is a work of art that emerges from the hub in a subtle arc of billet wizardry.
PM Image Series Wheels for Victory
Riviera
82
Heathen
Gasser
Torque
Victory Introducing Performance Machine wheels for the Victory line of motorcycles. PM has selected our top selling wheel designs to fit most Victory models, including the Hammer and the Vision. The Riviera, Heathen, Gasser, and Torque will be offered in chrome and Contrast Cut finishes with matching discs and belt sprockets. See page 52 for Victory disc applications See page 55 Victory for belt sprocket applications See page 83 for Victory wheel applications
83
PM Image Series Wheels
Front Wheels
How to create part numbers for your FRONT PM wheel: Select a front Wheel ID number that matches your bike If you have changed the front end of your bike, select the number appropriate for the actual front end.
New9 0 20
1981 thru 1999 HD ID Information
Year 1984-99 1984-99 1981-83 1981-86 1984-94 1984-94 1984-99 1988-99 1990-99 1997-99 1988-99 1991-99 1991-99 1993-99 1984-99 Pre-2000
Model XL - SPORTSTER, FRONT SINGLE DISC XL - SPORTSTER, FRONT DUAL DISC FXWG - WIDE GLIDE, FRONT SINGLE DISC FXWG - WIDE GLIDE, FRONT DUAL DISC FXR - FRONT SINGLE DISC FXR - FRONT DUAL DISC FXST - SOFTAIL FRONT SINGLE DISC FLST - HERITAGE, FRONT SINGLE DISC FLSTF - FATBOY, FRONT SINGLE DISC FLSTS - HERITAGE SPRINGER, FRONT SINGLE DISC FXSTS, FXSTSB, SPRINGER SOFTAIL, FRONT SINGLE DISC FX - DYNA GLIDE, FRONT SINGLE DISC FX - DYNA GLIDE, FRONT DUAL DISC FXDWG - DYNA GLIDE, FRONT SINGLE DISC FL - (TOURING) FRONT DUAL DISC Custom (will require modification)
Year 2000-07 2000-07 2008 2000-02 2000-05 2000-02 2003-06 2000-2006 2007-09 2007-09 2009 2007 2008-09 2003-04 2000-03 2000-03 2000-05 2004-05 2004-05 2006 2006-07 2006-07 2006-07 2000-07 2000-07 2000-07 2008-09 2008-09 2008-09 2008-09 2008-09 2008-09 2008-09 2008-09 2008 2008-09 2008-09 2000-09
Model XL- SPORTSTER, FRONT SINGLE DISC XL - SPORTSTER, FRONT DUAL DISC XL- SPORTSTER, FRONT SINGLE DISC FLSTC, FLSTF - FRONT SINGLE DISC FXSTS - SPRINGER SOFTAIL, FRONT SINGLE DISC FLSTS - HERITAGE SPRINGER, FRONT SINGLE DISC FLSTF, FLSTC FRONT SINGLE DISC FXST, FXSTB, FXSTD - SOFTAIL, FRONT SINGLE DISC FXST, FXSTD, FXSTB, FXSTC FLSTC, FLSTN FLSTSB FLSTF FLSTF DUAL DISC DUECE FX - DYNA GLIDE, FRONT SINGLE DISC FX - DYNA GLIDE, FRONT DUAL DISC FXDWG - DYNA WIDE GLIDE, FRONT SINGLE DISC FX - DYNA GLIDE, FRONT SINGLE DISC FX - DYNA GLIDE, FRONT DUAL DISC FX - DYNA GLIDE, FRONT SINGLE DISC FXDB FXDL, FXDI FXDWG - DYNA WIDE GLIDE, FRONT SINGLE DISC FLH- (TOURING) FRONT SINGLE DISC FLH- (TOURING) FRONT DUAL DISC VRSC FRONT DUAL DISC NON-ABS Brakes - FRONT SINGLE DISC - FLHR, FLHRC, FLHX, FLTR, FLHT, FLHTC, FLHTCU NON-ABS Brakes - FLH, FLHR, FLHRC, FLHX, FLTR, FLHT, FLHTC, FLHTCU ABS EQUIPPED - FRONT SINGLE DISC - FLHR, FLHRC, FLHX, FLTR, FLHT, FLHTC, FLHTCU ABS EQUIPPED - FLH, FLHR, FLHRC, FLHX, FLTR, FLHT, FLHTC, FLHTCU VRSCAW, VRSCDX,VRSCD ABS EQUIPPED - VRSCAW, VRSCDX,VRSCD FXD, FXDL, FXDB, FXDC, FXDWG, FXDF FXCW, FXCWC Custom (will require modification)
Year 1999-09 1999-09
Model ALL MODELS FRONT SINGLE DISC ALL MODELS FRONT DUAL DISC - HAMMER AND VISION MODELS ONLY
2000 thru 2009 HD ID Information
1999 thru 2009 Victory ID Information
Wheel ID #
Front ID No. 1213 1215 1214 1208 1213 1215 1214 1216 1221 1217 1217 1213 1215 1214 1220 1208, 1214
Front ID No. 1226 1225 1218 1229 1230 1231 1229 1227 1240 1241 1244 1239 1242 1233 1226 1225 1227 1234 1235 1236 1236 1238 1237 1201 1228 1232 1222 1202 1223 1204 1205 1206 1209 1210 1211 1212 1243 1227, 1240
Front ID No. 1926 1927
PM Image Series Wheels
Front Wheels
84
Select Wheel Design From Chart Below: This will create a SIZE/DESIGN part number. When combined with the bike ID number (from page to the left), this will create a COMPLETED part number for you to order with.
FRONT Wheel Design Part Numbers 16”x 3.5”
17”x 3.5”
18”x 3.5”
19”x 2.125”
19”x 3.0”
21”x 2.125”
23”x 3.5”
21”x 3.5”
Custom Applications
Cartel
7606R-CAR
7706R-CAR
7806R-CAR
7903R-CAR
7905R-CAR
7103R-CAR
7106R-CAR
7306R-CAR
Domino
7606R-DOM
7706R-DOM
7806R-DOM
7903R-DOM
7905R-DOM
7103R-DOM
7106R-DOM
N/A
El Dorado
7606R-ELD
7706R-ELD
7806R-ELD
7903R-ELD
7905R-ELD
7103R-ELD
7106R-ELD
N/A
Factor
7606R-FAC
7706R-FAC
7806R-FAC
7903R-FAC
7905R-FAC
7103R-FAC
7106R-FAC
7306R-FAC
Gasser
7606R-GAS
7706R-GAS
7806R-GAS
7903R-GAS
7905R-GAS
7103R-GAS
7106R-GAS
7306R-GAS
Gatlin
7606R-GAT
7706R-GAT
7806R-GAT
7903R-GAT
7905R-GAT
7103R-GAT
7106R-GAT
N/A
Heathen
7606R-HEA
7706R-HEA
7806R-HEA
7903R-HEA
7905R-HEA
7103R-HEA
7106R-HEA
7306R-HEA
Hooligan
7606R-HOO
7706R-HOO
7806R-HOO
7903R-HOO
N/A
7103R-HOO
7106R-HOO
N/A
Judge
7606R-JUD
7706R-JUD
7806R-JUD
7903R-JUD
7905R-JUD
7103R-JUD
7106R-JUD
N/A
Rival
7606R-RVL
7706R-RVL
7806R-RVL
7903R-RVL
7905R-RVL
7103R-RVL
7106R-RVL
7306R-RVL
Riviera
7606R-RIV
7706R-RIV
7806R-RIV
7903R-RIV
7905R-RIV
7103R-RIV
7106R-RIV
7306R-RIV
Roulette
7606R-ROU
7706R-ROU
7806R-ROU
7903R-ROU
N/A
7103R-ROU
7106R-ROU
N/A
Strut
7606R-STR
7706R-STR
7806R-STR
7903R-STR
7905R-STR
7103R-STR
7106R-STR
7306R-STR
Torque
7606R-TOR
7706R-TOR
7806R-TOR
7903R-TOR
7905R-TOR
7103R-TOR
7106R-TOR
N/A
Wrath
7606R-WRA
7706R-WRA
7806R-WRA
7903R-WRA
7905R-WRA
7103R-WRA
7106R-WRA
N/A
Victory wheels are only available in the following designs; Gasser, Heathen, Riviera, and Torque. 16”x 3.5”, 17”x 3.5” 18”x 3.5”, 19”x 2.125”
19”x 3.0”, 21”x 2.125” 21”x 3.5” Polish -P
$1099.95
Polish -P
$1399.95
Chrome -CH
$1199.95
Chrome -CH
$1299.95
Chrome -CH
$1599.95
Contrast Cut -BM
$1149.95
Contrast Cut -BM
$1249.95
Contrast Cut -BM
$1549.95
Platinum Cut -BMP
$1299.95
Platinum Cut -BMP
$1399.95
Platinum Cut -BMP
$1699.95
Stealth Cut -BMS
$1199.95
Stealth Cut -BMS
$1299.95
Stealth Cut -BMS
$1599.95
Polish -P
$999.95
23”x 3.5”
Add $50.00 - For ABS Brakes
Add $50.00 - For ABS Brakes
Add $50.00 - For ABS Brakes
Add $200.00 - For V-Rod using stock brakes
Add $200.00 - For V-Rod using stock brakes
Add $200.00 - For V-Rod using stock brakes
Wheel ID#
Design Part #
-
-
Finish
-
Add -CH at end of part number for Chrome - Add -BM at end of part number for Contrast Cut - Add -BMP at end of part number for Platinum Cut (Heathen and Torque ONLY) Add -BMS at end of part number for Stealth Cut (Factor ONLY)
85
PM Image Series Wheels
Rear Wheels
How to create part numbers for your REAR PM wheel: Select a Rear Wheel ID number that matches your bike If you have changed the rear end of your bike, select the number appropriate for the actual rear end.
Mode XL - REAR BELT DRIVE FXR - REAR BELT DRIVE FXR - REAR BELT DRIVE FXST - REAR BELT DRIVE FLST - REAR BELT DRIVE FLSTF - REAR BELT DRIVE FLSTS - REAR BELT DRIVE FXSTS, FXSTSB, SPRINGER SOFTAIL, REAR BELT DRIVE FX - DYNA GLIDE, REAR BELT DRIVE FXDWG - DYNA GLIDE, REAR BELT DRIVE FL - (TOURING) REAR BELT DRIVE
Year 2000-03 2004-07 2008-09 2000-06 2000-06 2006 2000-07 2006-07 2007 2000-05 2006 2006-07 2000-01 2002-07 2000-07 2002-06 2007 2008 2008 2008-09 2008 2008-09 2008-09 2008-09 2009 2009
Model XL - SPORTSTER XL - SPORTSTER XL - SPORTSTER FXST, FXSTB, FXSTS, FLSTD, FXSTC FLSTC, FLSTF, FLSTS FXST, FXSTB, FXSTS, - 200MM DUECE, FXSTD, FXSTDSEI FLSTC, FLSTN, FLSTSC FLSTF, FXST, FXSTB, FXSTC - 200MM FX - DYNA GLIDE, FXDWG FX - DYNA GLIDE FXDWG FLH- (TOURING) FLH- (TOURING) FLH PM Phatour 180 kit VRSC VRSCX, VRSCDX, VRSCAW - 240MM NON-ABS Brakes - FLHR, FLHRC, FLHX, FLTR, FLHT, FLHTC, FLHTCU ABS EQUIPPED - FLHR, FLHRC, FLHX, FLTR, FLHT, FLHTC, FLHTCU FXSTB, FXSTC, FLSTF, FLSTC, FLSTN, FLSTSB VRSCAW, VRSCDX,VRSCD ABS EQUIPPED - VRSCAW, VRSCDX,VRSCD FX DYNA - FXD, FXDL, FXDB, FXDC, FXDWG, FXDF FXCW, FXCWC FLH ( NON-ABS Brakes ) FLH ( ABS EQUIPPED )
New9 0 20
1981 thru 1999 HD ID Information
Year 1984-99 1984-94 1984-94 1984-99 1988-99 1990-99 1997-99 1988-99 1991-99 1993-99 1984-99
Year 1999-09 1999-09 1999-09
2000 thru 2009 HD ID Information
Rear ID No. 1264 1274 1274 1274 1274 1274 1274 1274 1274 1274 1277
Rear ID No. 1288 1293 1261 1285 1285 1294 1285 1285 1296 1283 1295 1295 1287 1290 1297 1291 1299 1252 1253 1256 1257 1258 1259 1263 1270 1269
1999 thru 2009 Victory ID Information Model VEGAS, 8-BALL, AND KINGPIN MODELS WITH 180mm TIRE JACKPOT AND HAMMER MODELS WITH A 240/250mm TIRE VISION MODELS
Wheel ID #
Front ID No. 1976 1977 1979
PM Image Series Wheels
Standard Rear Wheels
86
Select Wheel Design From Chart Below: This will create a SIZE/DESIGN part number. When combined with the bike ID number (from page to the left), this will create a COMPLETED part number for you to order with. Part numbers are for polished wheels. Please see below for other finishes.
REAR Wheel Design Part Numbers 16”x 3.5”
16”x 5.0”
17”x 6.0”
18”x 3.5”
18”x 4.25”
18”x 5.5”
Cartel
7606R-CAR
7612R-CAR
7716R-CAR
7806R-CAR
7809R-CAR
7814R-CAR
Domino
7814R-DOM
7606R-DOM
7612R-DOM
7716R-DOM
7806R-DOM
7809R-DOM
El Dorado
7606R-ELD
7612R-ELD
7716R-ELD
7806R-ELD
7809R-ELD
7814R-ELD
Factor
7606R-FAC
7612R-FAC
7716R-FAC
7806R-FAC
7809R-FAC
7814R-FAC
Gasser
7606R-GAS
7612R-GAS
7716R-GAS
7806R-GAS
7809R-GAS
7814R-GAS
Gatlin
7606R-GAT
7612R-GAT
7716R-GAT
7806R-GAT
7809R-GAT
7814R-GAT
Heathen
7606R-HEA
7612R-HEA
7716R-HEA
7806R-HEA
7809R-HEA
7814R-HEA
Hooligan
7606R-HOO
7612R-HOO
7716R-HOO
7806R-HOO
7809R-HOO
7814R-HOO
Judge
7606R-JUD
7612R-JUD
7716R-JUD
7806R-JUD
7809R-JUD
7814R-JUD
Rival
7606R-RVL
7612R-RVL
7716R-RVL
7806R-RVL
7809R-RVL
7814R-RVL
Riviera
7606R-RIV
7612R-RIV
7716R-RIV
7806R-RIV
7809R-RIV
7814R-RIV
Roulette
7606R-ROU
7612R-ROU
7716R-ROU
7806R-ROU
7809R-ROU
7814R-ROU
Strut
7606R-STR
7612R-STR
7716R-STR
7806R-STR
7809R-STR
7814R-STR
Torque
7606R-TOR
7612R-TOR
7716R-TOR
7806R-TOR
7809R-TOR
7814R-TOR
7606R-WRA
7612R-WRA
7716R-WRA
7806R-WRA
7809R-WRA
7814R-WRA
Wrath
Victory wheels are only available in the following designs; Gasser, Heathen, Riviera, and Torque. 16”x 3.5”, 18”x 3.5”
16”x 5.0, 17”x 6.0”, 18”x 4.25”, 18”x 5.5”
$999.95
Polish -P
Polish -P
$1099.95
Chrome -CH
$1299.95
Contrast Cut -BM
$1249.95
Platinum Cut -BMP
$1399.95
Add $50.00 - For ABS Brakes
Stealth Cut -BMS
$1299.95
Add $100.00 - For V-Rod using stock brakes for disc carrier
Add $50.00 - For ABS Brakes
Chrome -CH
$1199.95
Contrast Cut -BM
$1149.95
Platinum Cut -BMP
$1299.95
Stealth Cut -BMS
$1199.95
Add $100.00 - For V-Rod using stock brakes for disc carrier
Wheel ID#
Design Part #
-
-
Finish
-
Add -CH at end of part number for Chrome - Add -BM at end of part number for Contrast Cut - Add -BMP at end of part number for Platinum Cut (Heathen and Torque ONLY) Add -BMS at end of part number for Stealth Cut (Factor ONLY)
87
PM Driveside & Sprocket-Brake Wheels
Driveside, Sprocket-Brake, & Phat Rear Wheels Select Wheel Design From Chart Below:
Phat Rear and Driveside Wheel Design Part Numbers 18”x 3.5”
18”x 4.25”
18”x 5.5”
18”x 8.5”
18”x 8.5”
18”x 8.5”
18”x 10.0”
18”x 10.5”
Cartel
7806R-CAR
7809R-CAR
7814R-CAR
7825R-CAR
7825R-CAR-1
7825R-CARB
7832R-CAR-1
7834R-CAR-1
Domino
7834R-DOM-1
1” Axle
PM Phatail
1” Axle
1” Axle
7806R-DOM
7809R-DOM
7814R-DOM
7825R-DOM
7825R-DOM-1
7825R-DOMB
7832R-DOM-1
El Dorado
7806R-ELD
7809R-ELD
7814R-ELD
7825R-ELD
7825R-ELD-1
7825R-ELDB
7832R-ELD-1
7834R-ELD-1
Factor
7806R-FAC
7809R-FAC
7814R-FAC
7825R-FAC
7825R-FAC-1
7825R-FACB
7832R-FAC-1
7834R-FAC-1
Gasser
7806R-GAS
7809R-GAS
7814R-GAS
7825R-GAS
7825R-GAS-1
7825R-GASB
7832R-GAS-1
7834R-GAS-1
Gatlin
7806R-GAT
7809R-GAT
7814R-GAT
7825R-GAT
7825R-GAT-1
7825R-GATB
7832R-GAT-1
7834R-GAT-1
Heathen
7806R-HEA
7809R-HEA
7814R-HEA
7825R-HEA
7825R-HEA-1
7825R-HEAB
7832R-HEA-1
7834R-HEA-1
Hooligan
7806R-HOO
7809R-HOO
7814R-HOO
7825R-HOO
7825R-HOO-1
7825R-HOOB
7832R-HOO-1
7834R-HOO-1
Judge
7806R-JUD
7809R-JUD
7814R-JUD
7825R-JUD
7825R-JUD-1
7825R-JUDB
7832R-JUD-1
7834R-JUD-1
Rival
7806R-RVL
7809R-RVL
7814R-RVL
7825R-RVL
7825R-RVL-1
7825R-RVLB
7832R-RVL-1
7834R-RVL-1
Riviera
7806R-RIV
7809R-RIV
7814R-RIV
7825R-RIV
7825R-RIV-1
7825R-RIVB
7832R-RIV-1
7834R-RIV-1
Roulette
7806R-ROU
7809R-ROU
7814R-ROU
7825R-ROU
7825R-ROU-1
7825R-ROUB
7832R-ROU-1
7834R-ROU-1
Strut
7806R-STR
7809R-STR
7814R-STR
7825R-STR
7825R-STR-1
7825R-STRB
7832R-STR-1
7834R-STR-1
Torque
7806R-TOR
7809R-TOR
7814R-TOR
7825R-TOR
7825R-TOR-1
7825R-TORB
7832R-TOR-1
7834R-TOR-1
Wrath
7806R-WRA
7809R-WRA
7814R-WRA
7825R-WRA
7825R-WRA-1
7825R-WRAB
7832R-WRA-1
7834R-WRA-1
Add -CH at end of part number for Chrome - Add -BM at end of part number for Contrast Cut - Add -BMP at end of part number for Platinum Cut (Heathen and Torque ONLY) Add -BMS at end of part number for Stealth Cut (Factor ONLY) 18”x 3.5” Polish -P
18”x 4.25”, 18”x 5.5” $999.95
18”x 8.5”
18”x 10.0”, 18”x 10.5”
Polish -P
$1099.95
Polish -P
$1399.95
Polish -P
$1499.95
Chrome -CH
$1199.95
Chrome -CH
$1299.95
Chrome -CH
$1599.95
Chrome -CH
$1699.95
Contrast Cut -BM
$1149.95
Contrast Cut -BM
$1249.95
Contrast Cut -BM
$1549.95
Contrast Cut -BM
$1649.95
Platinum Cut -BMP
$1299.95
Platinum Cut -BMP
$1399.95
Platinum Cut -BMP
$1699.95
Platinum Cut -BMP
$1799.95
Stealth Cut -BMS
$1199.95
Stealth Cut -BMS
$1299.95
Stealth Cut -BMS
$1599.95
Stealth Cut -BMS
$1699.95
Add $50.00 - For ABS Brakes
Add $50.00 - For ABS Brakes
Add $50.00 - For ABS Brakes
Add $50.00 - For ABS Brakes
Add $100.00 - For V-Rod using stock brakes for disc carrier
Add $100.00 - For V-Rod using stock brakes for disc carrier
Add $100.00 - For V-Rod using stock brakes for disc carrier
Add $100.00 - For V-Rod using stock brakes for disc carrier
Wheels for PM Driveside Brake System The PM Driveside Brake requires a custom PM wheel. All PM Forged patterns are available as a “Driveside” wheel. Please see above chart for available sizes. Wheel ID (filled in) is for PM Wheel with PM Driveside brake hubs ‘87 - ‘09 Softails and Custom Chassis Select Wheel Design part number from above chart, this will create a COMPLETED part number for you to order with. Wheel ID#
1 2 75 -
Design Part #
-
Finish
-
Wheels PM Sprocket-Brake Wheel ID (filled in) is for PM Wheel with PM Sprocket-Brake for Softails and Custom Chassis Select Wheel Design part number from above chart, this will create a COMPLETED part number for you to order with. Wheel ID#
1 2 98 -
Design Part #
-
Finish
-
To Order please call 1-800-479-4037 or visit www.performancemachine.com
PM Phat Wheels
Phat Rear Wheels PM Phat Wheels 18”x8.5” 18”x10” 18”x10.5” Custom bikes and custom wheels have come a long way in the last twenty years and the wide wheel has become a big part of that growth. PM has created the best Phat wheels in the industry. We have three sizes to choose from, 8.5” (240 and 250 tires), 10” (for 280 series tires) and 10.5” for the meaty 300 series. You can go bigger, but we wouldn’t! PM Recommends using the 240 tire when installed with the PM Phatail kit. Wheel ID (filled in) is for Softail and Hardtail Chassis Select Wheel Design part number from matrix on page 87, this will create a COMPLETED part number for you to order with. Wheel ID#
1 2 74 -
Design Part #
-
Finish
-
88
Phatail Kit
91
Phatail Kit
Phatail Kit - 240 Rear Wheel Conversion
Will not work with Harley Factory Six Speed or Factory Hydraulic clutch slave on 1991-2006 Models. The PM Phatail kit is a BOLT-ON Kit for 1991 and newer Softails that allows our 18� x 8.5� wheel to rest comfortably in the confines of a bone stock HD Softail frame! Naturally it takes a little work, and the original frame/seat struts have to be cut off as well as swapping in several new trans parts, but the finished product does not offset the motor & trans or require a custom frame and can be done by any competent bike shop. Includes swingarm, fender, billet struts, all necessary trans parts and detailed instructions. Available in standard brake configuration or with pre-welded tabs for the PM Driveside Brake System. PM Phatail Kits include all of the components listed below. In addition to the kit you will need a PM Phat Wheel, disc, belt sprocket, rear brake, seat and a license plate mount. (if you use smooth fender) We strongly recommend the conversion be completed by a qualified bike shop. Custom seats can be purchased from Corbin and Bitchin Seat Company. PM Phatail Kit includes: 1) Wide swingarm and rear axle assembly 2) One piece formed steel fender and billet aluminum fender struts (optional recessed billet license plate frame) 3) Billet aluminum primary spacers, gaskets and hardware 4) Extended mainshaft, front motor sprocket & final drive gear 5) Starter shaft extension and all hardware 6) All necessary hardware, spacers and gaskets 7) Detailed instruction sheet with photos of each step
Phatail Kit
PM Phatail Kit for 1991-2006 5 Speed Transmission Standard Rear Brake
Set up for Driveside Brake
Phatail kit for existing 5 speed softail (2000-06) Standard Phatail Kit 0178-1900 W/Recessed License Plate 0178-1907
$2999.00 $3395.00
Phatail kit for existing 5 speed softail (2000-06) Driveside Brake Phatail Kit 0178-1901 W/Recessed License Plate 0178-1908
$2999.00 $3395.00
Phatail kit for existing 5 speed softail (1991-99)
Phatail kit for existing 5 speed softail (1991-99) 0178-1905
$3295.00
Driveside Brake Phatail Kit 0178-1906
$3295.00
W/Recessed License Plate 0178-1911
$3695.00
W/Recessed License Plate 0178-1912
$3695.00
Standard Phatail Kit
This kit also includes new belt.
This kit also includes new belt.
2007 PM Phatail Kit 2007 Phatail kit does not require transmission disassembly, uses included stock HD primary offset kit. Kits for use with PM Phatail Primary do not include stock HD primary offset kit. Standard Rear Brake
Phatail 0178-1937 W/Recessed License Plate 0178-1938
$2995.00 $3395.00
Use With PM Phatail Primary Phatail 0178-1960 W/Recessed License Plate 0178-1961
$3195.00 $3595.00
PM Driveside Brake
Driveside Brake Phatail 0178-1939 W/Recessed License Plate 0178-1940
$2995.00 $3395.00
Use With PM Phatail Primary Driveside Brake Phatail 0178-1962 W/Recessed License Plate 0178-1963
$3195.00 $3595.00
2008-2009 PM Phatail Kit The 2008-09 Phatail Kit is the easiest yet to install with no frame cutting necessary! The 2008-09 kit does not require transmission disassembly and also uses the included primary offset kit. Kits for use with PM Phatail Primary do not include stock HD primary offset kit. Standard Rear Brake
PM Driveside Brake
Phatail 0178-1941 W/Recessed License Plate 0178-1942
$2995.00 $3395.00
Driveside Brake Phatail 0178-1943 W/Recessed License Plate 0178-1944
$2995.00 $3395.00
Use With PM Phatail Primary Phatail 0178-1964 W/Recessed License Plate 0178-1965
$3195.00 $3595.00
Use With PM Phatail Primary Driveside Brake Phatail 0178-1966 W/Recessed License Plate 0178-1967
$3195.00 $3595.00
92
PM Racing
95
PM Race
Pro Stock
Drag Racing
To Order please call 1-800-479-4037 or visit www.performancemachine.com
Top Fuel
Drag Racing
World Land Speed Record
PM Race
96
The World’s Fastest Motorcycles continue to have one thing in common… The World’s Best Wheels and Brakes Denis Manning’s No. 7; Piloted by Chris Carr set the Absolute Motorcycle Landspeed Record of 350.844 MPH at the 2006 International Motorcycle Speed Trials, Bonneville Salt Flats, Utah. No. 7 was equipped with Performance Machine wheels and brakes. Performance Machine’s race program is an integral part of our product line. PM products have been designed based on what we have learned over the years on the race track. Our race product line includes wheels and brakes for Pro Stock, Top Fuel, and Dirt Track racing. PM products have been proven time and again by champions in each category.
Dirt Track
Dirt Racing
97
PM Clothing
Performance Machine Apparel
m rfor ance PeMachine Inc.
Front
Back
Ladies White Angel Tank $20.00 Small Medium Large
Ladies Baby Blue Ride Tee $20.00 Small Medium Large
0049-2301 0049-2302 0049-2303
Ladies Pink Heart Hoodie $45.00 Small Medium Large
0049-2331 0049-2332 0049-2333
0049-4451 0049-4452 0049-4453
Black Patch Cap $20.00 Small/Medium Large/XL
0049-1507 0049-1508
Men’s Charcoal Tracker Special $25.00 Medium Large XL XXL
0049-2082 0049-2083 0049-2084 0049-2085
Men’s Black/Red Experimental Tee $20.00 Medium Large XL XXL
0049-2092 0049-2093 0049-2094 0049-2095
Men’s PM USA Hooded Pullover $45.00 Medium Large XL XXL
0049-3562 0049-3563 0049-3564 0049-3565
PM Race Hat PM Classic T’s ....since 1970 $15.00
PM Classic T’s ....since 1970 $15.00
Black:
White:
Medium
0049-2052
Medium
0049-2062
Large
0049-2053
Large
0049-2063
XL
0049-2054
XL
0049-2064
XXL
0049-2055
XXL
0049-2065
PM Race T-Shirt $15.00 Medium
0049-2022
Large
0049-2023
XL
0049-2024
XXL
0049-2024
$20.00 FlexFit Blue
0049-1500
To Order please call 1-800-479-4037 or visit www.performancemachine.com
Limited Warranty
98
WARRANTY COVERAGE If your Performance Machine, Inc. product is defective in material or workmanship and you return it to us within one year from the date of purchase, we will replace it or, at our option, repair it at no charge to you. If we repair the defective part, we may use reconditioned replacement parts or materials. If we replace it, we may replace it with a reconditioned one of the same design. CHROME WARRANTY Two Year Unconditional Warranty The chrome finish on your Performance Machine product is of the highest quality, but to ensure its longevity it must be maintained properly. Salt, sand, and humidity are bad for chrome. If you ride the motorcycle in these conditions and do not clean and dry the chrome parts, the life of the chrome will be shortened. Do not use any abrasive cleaners or waxes. Performance Machine reserves the right to determine if the product has been maintained properly and has not been abused. If your Performance Machine, Inc. chrome product has been maintained properly and has not been abused, you may return it to Performance Machine within two years of the invoice date and if upon inspection it is found to be defective, we will replace it, or at our option repair it. Black Ano Warranty Two Year Unconditional Warranty The black anodize finish on your Performance Machine product is of the highest quality, but to ensure its longevity it must be maintained properly. Exposure to UV rays is bad for black anodize. Do not use any abrasive cleaners or waxes. Performance Machine reserves the right to determine if the product has been maintained properly and has not been abused. If your Performance Machine, Inc. black anodize product has been maintained properly and has not been abused, you may return in to Performance Machine within two years of the invoice date and if upon inspection it is found to be defective, we will replace it, or at our option repair it. HOW TO OBTAIN WARRANTY SERVICE Contact Performance Machine at (714) 523-3000 to obtain authorization to return the part. Send parts to us at the address below, together with a letter describing the problem. You must prepay all shipping costs. Performance Machine, Inc., Warranty Service 6892 Marlin Circle, La Palma, CA 90623 U.S.A. WARRANTY EXCLUSIONS This warranty does not cover any damage to the product caused by accident, misuse, failure to follow installation and operation instructions, misapplication, alteration or attempted unauthorized repair service by anyone other than us. This warranty does not cover wheels used on the street or highway that are designated in our catalog for racing purposes only. In addition, due to the unusual stresses placed on all parts used on the race track, Performance Machine, Inc. will warranty at their discretion any parts used for racing purposes. LIMITATIONS OF WARRANTY Repair or replacement of the product by us is your sole and exclusive remedy. Implied warranties, including those of fitness for a particular purpose and merchantability, are limited in duration to the one (1) year term of this express warranty. We will not be responsible for incidental or consequential damages. There are no express warranties which extend beyond those set forth in this document. STATE LAW RIGHTS Some states do not allow the exclusion or the limitation of incidental or consequential damages or a limitation of the duration of implied warranties so some of the above limitations or exclusions may not apply to you. This warranty gives you specific legal rights and you may also have other rights which may vary from state to state.
THE RULES
TERMS: Deposit required on all retail orders. Deposit must be money order or certified check; personal checks will be held for 2 weeks to clear. Orders must be paid in full before shipment. There will be no dealer discounts except to legitimate motorcycle businesses. CREDIT CARD PURCHASES: Performance Machine accepts Mastercard and VISA as a deposit or for payment in full on orders in the United States. Credit card orders can only be shipped to the verifiable billing name and address of the card. Balance of order must be paid in full before shipment. We do not accept Credit Card payments for any orders shipped out of the United States (except Canada and Puerto Rico). SHIPPING: All orders within the continental U.S. will be shipped Ground unless otherwise specified. All orders shipped FOB PERFORMANCE MACHINE, INC. FOREIGN AND APO SHIPMENTS: Performance Machine recommends that you contact a local dealer for parts; Contact Performance Machine for a list of dealers in your country. All foreign shipments must be paid in full including freight. Performance Machine does not accept Credit Cards for payment of foreign orders. Contact Performance Machine for acceptable method of payment. PM will not be responsible for customs duties or charges when importing parts into other countries. All APO shipments must be paid in full including shipping via U.S. Mail. For APO shipments only - write or call Performance Machine, Inc. for estimate of shipping costs. RETURNS: No returns will be accepted without prior authorization by calling or writing Performance Machine, Inc. to request an RMA number. Parts will only be considered for return if the request is made within 30 days from the date of invoice. A handling fee will be charged to restock parts unless otherwise specified. Performance Machine, Inc. reserves the right to refuse to issue an RMA at our discretion. PLEASE NOTE: ALL PARTS RETURNED MUST BE PACKAGED CORRECTLY; THE CUSTOMER WILL BE RESPONSIBLE FOR MERCHANDISE DAMAGED IN SHIPPING DUE TO INADEQUATE PACKAGING. PERFORMANCE MACHINE WILL NOT BE RESPONSIBLE FOR RETURN FREIGHT ON OVERSEAS ORDERS. PRICES: ALL PRICES ARE SUBJECT TO CHANGE WITHOUT NOTICE. DELIVERY TIME: PERFORMANCE MACHINE, INC. is the manufacturer of the majority of our products. PERFORMANCE MACHINE, INC. can give an estimated shipping date, however we cannot guarantee exact delivery for any product.
6892 Marlin Circle, La Palma, CA 90623 800-479-4037 - 714-523-3000 - fax 714-523-3007 www.performancemachine.com