ROLAND SANDS DESIGN At RSD we pride ourselves on building products based on quality and design, not on gimmick. We believe this basic belief sets our products apart. We work very hard at coming up with new ideas, finishing options and ways of doing things to continuously create new products that set RSD apart. Many of our products have the ability to transform your stock bike into something completely different. These are game changing ideas for those who are ready to take the next step in bike design, customization and creation. We hope you enjoy our products as much as we enjoyed creating them.
TABLE OF CONTENTS
SLAM WHEEL P.8
SLAM WHEEL P.9
BOSS WHEEL P.11
TURBO WHEEL P.12
MISSION WHEEL P.14
GAS CAPS P.30-31
2
JUDGE WHEEL P.15
FRONT MASTER CYLINDER CAPS P.37
BOSS WHEEL P.10
ROTORS P.19
DIESEL WHEEL P.13
PULLEYS P.21
DOMINO WHEEL P.16
GAUGE & HEADLIGHT RE-LOCATOR P.35
VINTAGE SOLO SEAT P.44
TURBINE A/C P.23
SUPERVENTED OUTERS P.26
CLIP ONS P.36
HANG LO 2-UP BAGGER SEAT P.45
VENTURI A/C P.24-25
VELOCITY STACK P.29
A/C COVERS P.27
BREATHERS P.29
VINTAGE GAS TANK P.42
BACKBONE COVER P.42
VINTAGE FENDER KIT P.41
TRACKER FENDER KIT P.40
ROLANDSANDS.COM T-BAR P.49
RIBBED BOBBER P.53
RISERS P.58
FOOT PEGS P.59
GRIPS P.60-61
ROCKER BOX COVERS P.65
TIMING COVER P.66
TRANSMISSION COVER P.67
VINTAGE KING APE P.51
VINTAGE P.50
HEADLIGHT BRACKET P.78
RSD GAS KIT P.43
INSPECTION COVER P.69
IGNITION COVER P.68
DERBY COVER P.69
VINTAGE SHORT STACK P.52
FLAT-OUT DRAG P.57 TAG BRACKET P.73
MOTOR MOUNTS P.74
RSD LONG LOGO (OFFICIAL)
COIL IGNITION RE-LOCATOR P.75
FRONT FORK BRACE P.76-77
CONVOY P.55
GLIDER P.56
RED
PANTONE 1805 C LAZY BOY P.54
RSD APPAREL P.85-87
BLACK
PANTONE BLACK C
3
DEVELOPMENT PROCESS
At RSD we are constantly building bikes and with those builds comes a constant flow of new products. It’s how we do things on a daily basis. Every bike that comes in the door leaves with something brand new on it, some kind of crazy prototype or new twist on an old design. Some parts never make it to production, some never see the light of day, but the best of the best..those are the ones that make it into the catalog. Those are the pieces that get tested, engineered and perfected. Those are the select few pieces that get ridden hard, rained on and put away wet, overheated and cooled and generally thrashed until they earn the right to wear the RSD badge. It’s our job to put our products through hell so when they get to our customers they have already taken enough of a beating to live through just about anything you are brave enough to do.
TESTING,MATERIALS,R&D We use only the best certified and documented materials for our products. Each and every product we design goes through extensive testing to ensure the strength and longevity of the product will be in place for many years to come. Many products have specific testing machines built for longevity testing to ensure long term product quality.
MANUFACTURING Performance Machine manufactures the majority of RSD products in their state-of-the-art facility in Southern California. PM has the reputation of producing the highest quality products on the market today – which makes RSD no different. Each RSD product is designed and engineered to exacting standards and thoroughly tested at the PM in-house facility – the only in-house testing facility like it in the U.S.A., testing to strict world-wide standards such as JASO and TUV.
wheels Our wheels begin as aerospace quality aluminum forgings that place the highest material strength in the same direction as the operating load, creating a light and strong wheel. From there we create the array of styles you see on our bikes throughout this catalog using CAD design software. Each wheel design and size must pass all of our testing standards. Specific wheel designs are TUV certified through Performance Machine, LLC. Call Performance Machine at 1-800-479-4037 for part numbers and pricing.
TORSIONAL LOAD TESTing
ICON LEGEND BILLET ALUMINUM
FORGED
This test simulates starting and stopping, as well as the occasional burn out. Load sensitive rams cycle back and forth replicating real world style torture in an attempt to rip the hub out of the rim.
SIDE LOAD TESTing We’ve replicated the incredible stress a wheel is subjected to during cornering. You can trust your RSD wheels will withstand those canyon roads and track days because they’ve come out of our simulated side load test unscathed.
IMPACT TESTing This massive testing unit simulates the pot holes and road hazards that a wheel is subjected to in the real world. We wrap each and every wheel size and design with a tire and replicate a hard edged hit; the wheel must retain air pressure for a specific time in order to pass.
RADIAL LOAD TESTing This giant machine simulates a load on a tire/wheel assembly while taking miles and miles of road with the occasional beating. The wheel is forced to endure countless rotations with one flaw sending the design back to the drawing board.
LIGHTWEIGHT
BOLT ON
FUEL
ROLLED RIM LIP
CAFE R ACER
CNC
DUR ABLE
FASTENERS INCLUDED
KNURL
LASER CUT
MILLED RIM LIP
MODIFATION REQUIRED
MAINTENENCE FREE
1
R ACE BRED
SOLD AS A PAIR
SPEED DOTS
STEEL
TIG WELDED
All RSD wheels, discs and pulleys are available in Black Ops, Contrast Cut, Chrome and polish. Contact Performance Machine for any other custom finish options you are interested in.
BLACK-OPS
RSD’s worldwide introduction of a new finish, Black-Ops. A top secret proprietary two-tone black finish. This is the new black and aluminum has never looked so tough.
INTRODUCING
™
wheels
7
SLAM
BLACK-OPS
Slam a set on anything for an instant weight reduction and high performance twist. With just enough detail work to make the Black Ops come alive in two shades of black. FULLY SEALED, MAINTENANCE FREE – DEEP GROOVE • WHEEL BEARINGS RSD LOGO BADGE • DESIGN MATCHED DISCS, PULLEYS AND AIR CLEANERS • AVAILABLE IN ALL FINISHES •
8
SLAM
CONTRAST CUT
Huge rim pockets remove tons of weight while still retaining a rolled rim lip. Coupled with speed dots and super aggressive straight spokes the Slam is up to the task of making your motorcycle turn faster while looking unlike any other machine. • FULLY SEALED, MAINTENANCE FREE – DEEP GROOVE WHEEL BEARINGS • RSD LOGO BADGE • DESIGN MATCHED DISCS, PULLEYS AND AIR CLEANERS • AVAILABLE IN ALL FINISHES
9
BOSS
BLACK-OPS
The Boss in Black Ops is the epitome of subtlety and design smashed together in one stealthy, high performance package. Bolt a set of these on for instant tough. FULLY SEALED, MAINTENANCE FREE – DEEP GROOVE • WHEEL BEARINGS RSD LOGO BADGE • DESIGN MATCHED DISCS, PULLEYS AND AIR CLEANERS • AVAILABLE IN ALL FINISHES •
10
BOSS
CONTRAST CUT
The Boss in Contrast Cut is striking. The contrast cut finish on this wheel is second to none with an amazing amount of detail while staying lightweight. • FULLY SEALED, MAINTENANCE FREE – DEEP GROOVE WHEEL BEARINGS • RSD LOGO BADGE • DESIGN MATCHED DISCS, PULLEYS AND AIR CLEANERS • AVAILABLE IN ALL FINISHES
11
TURBO
CONTRAST CUT
The RSD Turbo Wheel is at the absolute cutting edge of wheel design. It bleeds modern design, yet still hints at good old fashioned hot rod style. It’s lightening pockets are more than just an eye catching detail; they are a means to an end. The removal of mass from the rim lip lightens the wheel, therefore increasing performance. FULLY SEALED, MAINTENANCE FREE – DEEP GROOVE • WHEEL BEARINGS DESIGN MATCHED DISCS, PULLEYS AND AIR CLEANERS • AVAILABLE IN ALL FINISHES •
12
DIESEL
CONTRAST CUT
One of our most popular wheels, the Diesel is clean yet mean. We introduced the drilled rim lip speed dots on this wheel to help compliment it’s simple design and give it just enough pop to be a stand out. The Diesel wheel will flow with whatever bike you put it on.
• FULLY SEALED, MAINTENANCE FREE – DEEP GROOVE WHEEL BEARINGS • DESIGN MATCHED DISCS, PULLEYS AND AIR CLEANERS • AVAILABLE IN ALL FINISHES
13
MISSION
CONTRAST CUT
The Mission is simple, concise and designed to complement the detail work. CNC-machined aluminum, machined twice to offer black anodized speed dots, double pin stripes and a red RSD logo. Mission accomplished.
FULLY SEALED, MAINTENANCE FREE – DEEP GROOVE • WHEEL BEARINGS DOUBLE RADIAL RIM LIP GROOVES • RED RSD LOGO BADGE • DESIGN MATCHED DISCS, PULLEYS AND AIR CLEANERS • AVAILABLE IN ALL FINISHES •
14
JUDGE
CONTRAST CUT
The Judge is the original Contrast Cut wheel, the one that started it all. The great thing about the judge is it still looks as good today as it did when it was first introduced and continues to be one of Roland’s personal favorites. It has just enough hot rod and race inspiration to make it look good on anything. • FULLY SEALED, MAINTENANCE FREE - DEEP GROOVE WHEEL BEARINGS • DESIGN MATCHED DISCS, PULLEYS AND AIR CLEANERS • AVAILABLE IN ALL FINISHES
15
DOMINO
CONTRAST CUT
As far as aggression and purpose, this wheel gets the job done as effectively as possible. It’s simple yet directed design splits 9 into 18 spokes and is visually and architecturally built with structure in mind. This wheel will look at home on a race inspired bike as well as a cross country road bomber. FULLY SEALED, MAINTENANCE FREE - DEEP GROOVE • WHEEL BEARINGS DESIGN MATCHED DISCS, PULLEYS AND AIR CLEANERS • AVAILABLE IN ALL FINISHES •
16
VICTORY 200 What started life as a simple Victory Custom has now been transformed into a 230 plus HP, turbo charged, fire breathing beast capable of well over 200mph. Somewhere in all of our twisted horsepower hungry minds is the need to obtain speeds that should be reserved for air planes and F1 cars. The vast majority of people will have a difficult time understanding what pushes a human to want to go 200mph and faster. What is it that makes a man (and woman) want to conquer such an obstacle. The human body is not made to exist in this environment and at that pace. But this is not a story about limits, this is a story about the need to reach for a goal and to conquer both fear and diversity.  This is a journey of both man and machine existing in harmony at the most dramatic and radical of circumstances. An assault on the laws of physics and gravity and a fight for every last mph screaming across the hot flat dessert in a battle for traction, aerodynamics and Horsepower. Throughout this quest, new parts are developed, prototypes are tested and our standard RSD parts are pushed to the limit - and beyond. All to ensure that only the best from RSD makes it to your local dealer.Â
17
rotors For us, rotor design is more than just mimicking the look of our wheels; it is both science and art. Its taking all that we have learned through the years and improving upon it. We design each rotor from the ground up and analyze every detail’s function along the way. Our two-piece design allows the rotor to expand and contract when heated from the friction caused by the brake pad. The aerated portholes on the stainless steel outer band vent heat and dust away from the disc. HIGH GRADE 420 STAINLESS STEEL REPLACEABLE OUTER BANDS BILLET ALUMINUM CNC-MACHINED INNER CARRIERS CROSS DRILLED BANDS FOR INCREASED VENTILATION BLANCHARD GROUND BANDS ENSURE PRECISE AND EVEN TOLERANCE 11.5˝ AND 300MM ROTORS ARE FIXED 13˝ ROTORS ATTACH VIA FLOATING ELEMENTS FRONT ROTORS ARE DRILLED FOR STANDARD HD BOLT PATTERN 3-1/4˝ X 5˝ X 5/16˝ REAR ROTORS ARE DRILLED FOR STANDARD HD BOLT PATTERN 3-1/4˝ X 5˝ X 3/8˝ ALL ROTOR CARRIERS ARE COUNTER BORED WITH 2.22˝ I.D A REDUCER SPACER (PART# 1710-0636) IS SOLD SEPARATELY FOR 1.985˝ I.D. WIDE REAR WHEELS REQUIRE USE OF ROTORS WITH 2.50˝ I.D.
*RSD ROTORS WILL FIT 1984-1999 HD APPLICATIONS ONLY IF USED IN CONJUNCTION WITH PERFORMANCE MACHINE CALIPERS AND RSD WHEELS *RSD ROTORS WILL NOT WORK WITH STOCK HD WHEELS
20 18
• • • • • • • • • • •
BOSS
DIESEL
DOMINO
JUDGE
MISSION
SLAM
SLAM
11.5”/11.8”
13”
BOSS
19
PULLEYS Motorcycles are more than just a hobby; they’re a way of life. Reflecting the power of innovation, aesthetics and the inner workings, we give each one of our parts a soul. Each has its intended niche; each has its own style. Pulleys are no exception. The precision-hobbed tooth profiles are designed to fit your bike’s belt perfectly. Built for performance and designed for longevity. CNC MACHINED FROM ALUMINUM FORGING • HARD ANODIZED TEETH • SPECIAL ADAPTER INCLUDED ALLOWING • FITMENT OF 1.95˝, 2.22˝ AND 2.50˝ O.D. HUB FLANGES 2000-06 SOFTAIL PULLEYS INCLUDE • MOUNTING BOLTS STAINLESS STEEL BELT RETAINER • BOLTS INCLUDED *RSD PULLEYS WILL NOT WORK ON SPORTSTERS
20 22
BOSS
JUDGE
22
BOSS
MISSION
DIESEL
DOMINO
SLAM
SLAM
21
AIR INTAKES SYSTEMS When RSD set out to create an air cleaner, we wanted to make something that improved performance as well as the look of a bike. We ended up revolutionizing what an air cleaner can be in both function and aesthetics.
22
TURBINE AIR CLEANER The new RSD Turbine Air cleaner took some major design cues from jet engines. This is the next step in intake systems for your bike. We focused our efforts on building something that would flow well while also giving a unique and timeless style that looks good on any bike. • BEST IN FILTRATION AND FLOW FROM K&N • HIGH-VOLUME K&N AIR FILTER INCLUDED • HIDDEN INTERNAL CRANK CASE BREATHERS • SLOTTED BREATHER BOLTS AND OIL TUBES ARE INCLUDED WITH BIG TWIN APPLICATIONS
*NOT LEGAL FOR SALES OR USE ON POLLUTION CONTROLLED VEHICLES *ALL AIR CLEANERS CAN BE USED ON MIKUNI CARBS WITH USE OF ADAPTER PART NUMBER HS42/001-K (SOLD SEPERATELY)
CONTRAST CUT
BLACK PATENT PENDING TURBINE AIR CLEANER APPLICATIONS
CHROME
BO
0206-2037-B
0206-2037-SMB
2008-11 FL,THROTTLE BY WIRE
0206-2038-B
0206-2038-SMB
1991-11 XL SPORTSTER
0206-2039-B
0206-2039-SMB
1993-11 BIG TWIN W/S&S E/G CARB
0206-2040-B
0206-2040-SMB
BM
CH
1993-11 TWIN CAM & EVO
0206-2037-BM
0206-2037-CH
2008-11 FL,THROTTLE BY WIRE
0206-2038-BM
0206-2038-CH
1991-11 XL SPORTSTER
0206-2039-BM
0206-2039-CH
1993-11 BIG TWIN W/S&S E/G CARB
0206-2040-BM
0206-2040-CH
TURBINE AIR CLEANER APPLICATIONS
BLACK-OPS
B
1993-11 TWIN CAM & EVO
23
VENTURI AIR CLEANER The Venturi Air Cleaner features the best in filtration and flow from industry leader K&N. It is a proven high performance bolt-on part that drastically improves the looks and performance of your machine. Our revolutionary backing plate promotes smooth air flow into the carb/throttle body while also providing hidden internal crank case breathers and our new tight seal oil separator insures a clean, leak free ride. Manufactured from Billet Aluminum in the USA, the Venturi is a jewel for the side of your bike. • DISTINCT EXPOSED FILTER DESIGN • DESIGN MATCHED TO RSD WHEELS • BUILT-IN CRANK CASE BREATHERS • HIGH-VOLUME K&N AIR FILTER INCLUDED • STAINLESS STEEL WIRE MESH SCREEN • SLOTTED BREATHER BOLTS AND OIL TUBES ARE INCLUDED WITH BIG TWIN APPLICATIONS *NOT LEGAL FOR SALES OR USE ON POLLUTION CONTROLLED VEHICLES *ALL AIR CLEANERS CAN BE USED ON MIKUNI CARBS WITH USE OF ADAPTER PART NUMBER HS42/001-K (SOLD SEPERATELY)
SLAM 24
BOSS
SLAM
BOSS
VENTURI AIR CLEANERS
SPEED 5 CH
SPEED 5
SPEED 7
SPEED 7 CH
MISSION BUILT-IN CRANKCASE BREATHERS
OIL TUBES
JUDGE
RONIN
DOMINO
TURBO
VENTURI CHAMFER
25
VENTURI A/C APPLICATIONS
BOSS BO
BOSS CC
DOMINO CC
JUDGE CC
MISSION CC
RONIN CC
SLAM BO
SLAM CC
SPEED 5 CC
SPEED 5 CH
SPEED 7 CC
SPEED 7 CCP
SPEED 7 CH
TURBO CC
TURBO CH
1993-11 TWIN CAM & EVO 0206-2042-SMB 0206-2042-BM 0206-2028-BM 0206-2024-BM 0206-2012-BM 0206-2015-BM 0206-2045-SMB 0206-2045-BM 0206-2000-BM 0206-2000-CH 0206-2003-BM 0206-2003-BMP 0206-2003-CH 0206-2033-BM 0206-2033-CH 2008-11 FL, THROTTLE BY WIRE 0206-2043-SMB 0206-2043-BM 0206-2027-BM 0206-2023-BM 0206-2011-BM 0206-2014-BM 0206-2046-SMB 0206-2046-BM 0206-2001-BM 0206-2001-CH 0206-2004-BM 0206-2004-BMP 0206-2004-CH 0206-2034-BM 0206-2034-CH 1991-211 XL SPORTSTER 0206-2041-SMB 0206-2041-BM 0206-2029-BM 0206-2025-BM 0206-2013-BM 0206-2016-BM 0206-2047-SMB 0206-2047-BM 0206-2002-BM 0206-2002-CH 0206-2005-BM 0206-2005-BMP 0206-2005-CH 0206-2035-BM 0206-2035-CH 1993-11 BIG TWIN w/S&S E/G CARB 0206-2044-SMB 0206-2044-BM 0206-2030-BM 0206-2026-BM 0206-2019-BM 0206-2020-BM 0206-2048-SMB 0206-2048-BM 0206-2017-BM 0206-2017-CH 0206-2018-BM 0206-2018-BMP 0206-2018-CH 0206-2036-BM 0206-2036-CH *FITMENT NOT GUARANTEED FOR S&S ENGINES
SUPERVENTED OUTERS
OIL TUBE RETROFIT KIT
If you have purchased a RSD Venturi Air Cleaner in the past, but have fallen for one of our new styles, you can now update your air cleaner to complement your RSD wheels, by just replacing the faceplate.
If you purchased your RSD aircleaner prior to 2010 and notice any oil dripping from the bottom filter element, this FREE kit cleans up the pesky problem. We have found that some engines make excessive crankcase pressure causing them to spew a bit more oil than others up through the breathers. This retrofit kit consists of slotted-head breather bolts and injection molded rubber tubes that fit securely into the backing plate of your existing air cleaner. These parts help route any oil coming out of your breathers right back into your engine without spilling a drop.
• SEE VENTURI AIR CLEANERS OR PAGES (24-25) FOR FACEPLATE IMAGES • TURBINE FACEPLATE ALSO AVAILABLE
OIL TUBES
TURBINE OUTERS PRODUCT DESCRIPTION TURBINE
BLACK
CC
CH
BO
0206-2053-B
0206-2053-BM
0206-2053-CH
0206-2053-SMB
SLOTTED BREATHER BOLTS OIL TUBE RETROFIT KIT INCLUDED WITH ALL NEW RSD AIR CLEANERS
SUPERVENTED OUTERS PRODUCT DESCRIPTION PRODUCT DESCRIPTION ANY VENTURI A/C
SLAM BO
BOSS BO 0206-2032BSS-BM
SLAM CC
BOSS CC
DOMINO CC
JUDGE CC
MISSION CC
0206-2032BSS-SMB
0206-2032DOM-BM
0206-2032JUD-BM
0206-2032MIS-BM
SPEED 5 CC
SPEED 5 CH
SPEED 7 CC
SPEED 7 CCP
SPEED 7 CH
RONIN CC 0206-2032RON-BM
TURBO CC
TURBO CH
0206-2032SLM-BM 0206-2032SLM-SMB 0206-2032SP5-BM 0206-2032SP5-CH 0206-2032SP7-BM 0206-2032SP7-BMP 0206-2032SP7-CH 0206-2032TUR-BM 0206-2032TUR-CH
26
PART # SUG. RETAIL
2008-2011 FLHT, FLHR, FLHX, FLTR
0206-4000
FREE
1993-2006 BIG TWIN W/ CV CARB
0206-4001
FREE
2002-07 FLHT, FLHR, FLHX, FLTR W/ DELPHI EFI
0206-4001
FREE
2001-2011 SOFTAIL, 2004-2011 DYNA
0206-4001 0206-4000
FREE
PULL OVER RAIN SOCK When you find yourself in a sudden down pour, help prevent water from entering your engine with our new Pull Over Rain Sock. Stash it in a backpack or pocket and when the skies open, stretch it over your complete RSD air cleaner for quick & easy roadside installation, no tools required. • COMPATIBLE WITH ALL RSD VENTURI & TURBINE AIR CLEANERS • DURABLE POLYESTER PRE-FILTER IS FACTORY TREATED USING A PROPRIETARY HYDROPHOBIC PROCESS TO REPEL WATER • UNIFORM MICRON OPENINGS ALLOWS AIR IN WHILE KEEPING DEBRIS (.005” OR LARGER AND WATER OUT • DYNO & FLOW BENCH PROVEN TO MAINTAIN CURRENT PERFORMANCE • PRINTED RSD LOGO – KEEP IT DRY
SCRUB BAG
While washing or storing your motorcycle, stretch our RSD Scrub Bag over your complete RSD Air Cleaner to prevent water or other debris from entering engine. • COMPATIBLE WITH ALL RSD VENTURI & TURBINE AIR CLEANERS • MADE FROM WATERPROOF DENIER MATERIAL • ELASTIC ENCLOSURE SEALS OUT WATER AND DEBRIS • PRINTED RSD LOGO – KEEP IT CLEAN
*NOTE: CANNOT BE USED WHILE ENGINE IS RUNNING. FOR WASHING AND STORAGE PURPOSES ONLY!
INTERNALLY MOUNTED RAIN SOCK If you are doing a lot of wet weather riding, we recommend our Internally Mounted Rain Sock. While not a necessity for riding in the rain with a RSD Air Cleaner, it can help reduce filter saturation. • COMPATIBLE WITH ALL RSD VENTURI & TURBINE AIR CLEANERS • DURABLE POLYESTER PRE-FILTER IS FACTORY TREATED USING A PROPRIETARY HYDROPHOBIC PROCESS TO REPEL WATER • UNIFORM MICRON OPENINGS ALLOWS AIR IN WHILE KEEPING DEBRIS .005” OR LARGER AND WATER OUT • DYNO & FLOW BENCH PROVEN TO MAINTAIN CURRENT PERFORMANCE • PRINTED RSD LOGO
FOR ALL RSD AIR CLEANERS
PRODUCT DESCRIPTION
PART#
INTERNALLY MOUNTED RAIN SOCK
0206-0029
PULL-OVER RAIN SOCK
0206-0041
SCRUB BAG
0206-0043
27
VELOCITY STACK
28
Performance engines require a lot of airflow to create serious power, and that requires a highflowing induction system. Use our velocity stack to smooth the airflow into the throttle body/ carb’s throat for optimized fuel delivery. • RSD LOGO LASER ENGRAVED ONTO BACKING PLATE • DRILLED BREATHERS INCLUDED *NOT LEGAL FOR SALES OR USE ON POLLUTION CONTROLLED VEHICLES *NO FILTRATION ELEMENT INCLUDED OR AVAILABLE
CHROME
BLACK ANODIZED
DRILLED BREATHER KIT CHROME
BLACK ANODIZED
NOSTALGIA VELOCITY STACK
PRODUCT DESCRIPTION
BLACK
CHROME
1993-11 BIG TWIN W/S&S E/G CARB
0204-2000-B
0204-2000-CH
1993-2011 TWIN CAM & EVO
0204-2001-B
0204-2001-CH
PRODUCT DESCRIPTION
1991-2011 XL SPORTSTER
0204-2005-B
0204-2005-CH
1999-11 TWIN CAM
DRILLED BREATHER KIT
BLACK
CHROME
0204-2002-B
0204-2002-CH
29
GAS CAPS
30
We’ve packed as much style as we could into the new RSD gas cap line. Each design is unique and with over a dozen to choose from, there is sure to be one to match your style. TRACKER CH
TECH CH
GEARDRIVE CH
CAFE CH
VINTAGE CH
GEARDRIVE CC
CAFE CC
VINTAGE CC
• SCREW-IN VENTED CAP • LASER ENGRAVED ROLAND SANDS DESIGN • DIRECT REPLACEMENT FOR STOCK GAS CAP
TRACKER CC
TECH CC
GAS CAP *INTERCHANGEABLE RSD LOGO BADGES (BLACK & BRASS)
TRACKER BO
GAS CAPS APPLICATIONS
CAFE BO
CAFE CC
LATE 1996-2011 HD MODELS 0210-2004-SMB 0210-2004-BM
FUEL GAUGE REPLACEMENT CAP
CAFE BO
CAFE CC
LATE 1996-2011 HD MODELS 0210-2008-SMB 0210-2008-BM
GEARDRIVE BO
TECH BO
CAFE CH
GEAR DRIVE BO GEAR DRIVE CC
GEAR DRIVE CH
0210-2004-CH
0210-2006-SMB 0210-2006-BM
0210-2006-CH
CAFE CH
GEAR DRIVE BO GEAR DRIVE CC
GEAR DRIVE CH
0210-2008-CH
0210-2009-SMB 0210-2009-BM
0210-2009-CH
TECH BO 0210-2005-SMB
TECH BO 0210-2010-SMB
TECH CC 0210-2005-BM
TECH CC 0210-2010-BM
TECH CH
CAFE BO
TRACKER BO
0210-2005-CH 0210-2007-SMB
TECH CH
TRACKER BO
0210-2010-CH 0210-2011-SMB
FUEL GAUGE REPLACEMENT CAP
TRACKER CC
TRACKER CH
VINTAGE CC
VINTAGE CH
0210-2007-BM
0210-2007-CH
0173-1805-BM
0173-1805-CH
TRACKER CC
TRACKER CH
VINTAGE CC
VINTAGE CH
0210-2011-BM
0210-2011-CH
0210-2012-BM
0210-2012-CH
31
TONY HAWK CAFE SPORTSTER
32
We like skateboarding and we also like to help people, so when Tony Hawk and his foundation approached us about collaborating, we were more than stoked to make it happen. We auctioned this customized Tony Hawk Café Sportster to raise money for SHRED Stand Up for Skate Parks. The bike features our new Café Sportster line of products and a bitchin’ skate deck seat pan and bushing seat kit. Our newest finish, Black Ops tied in nicely to the signature Hawk graphic. This is about as theme-bike as we get.
PARTS WISH LIST - TONY HAWK CAFE SPORTSTER PRODUCT DESCRIPTION
PART #
CAFE FRONT MASTER CYLINDER CAP
0208-2038-SMB
39mm CLIP-ONS
0208-2039-B
GAUGE & HEADLIGHT REL. MOUNT
0207-2001-B
COIL IGNITION RELOCATOR
0205-2009
BLACK OPS SLAM VENTURI AIR CLEANER
0206-2047-SMB
NOSTALGIA IGNITION COVER
0177-2012-B
TRACKER GRIPS
0063-2019-SMB
BUY
33
CAFE SPORTSTER The RSD line of CafĂŠ Sportster Products easily convert a late model Sportster into an aggressive yet comfortable cafĂŠ racer, while retaining all the function and reliability of the OEM wiring, headlight and speedometer.
34
CAFE GAUGE AND HEADLIGHT RE-LOCATOR The Café Gauge and Headlight Re-locator lowers your headlight and gauges to a more sleek position from the top handlebar clamp down to the front of the top triple clamp and lowers the stock headlight 2 inches. This allows for the use of any aftermarket risers or complete elimination of risers for use of the RSD Café 39mm Clip-Ons. ELIMINATES STOCK SPORTSTER HEADLIGHT VISOR/EYEBROW • LED WARNING/INDICATOR LIGHT SOLD SEPARATELY •
1
LED INDICATOR
When utilizing the RSD Café Gauge and Headlight Re-locator, keep your LED light functionality with a LED unit that is sold separately. OPTIONAL COMPONENT FOR RSD CAFE GAUGE & HEADLIGHT RE-LOCATOR • NOT COMPATIBLE WITH OEM GAUGE MOUNT • ALLOWS ALL OEM WARNING & INDICATOR FUNCTIONS •
CAFÉ GAUGE & HEADLIGHT RE-LOCATOR
PRODUCT DESCRIPTION 2008-11 XL SPORTSTER
BLACK 0207-2001-B
CHROME
(OUTER GREEN: L&R TURN INDICATORS, RED: OIL PRESSURE, BLUE: HIGH BEAM & CENTER GREEN: NEUTRAL)
0207-2001-CH
LED INDICATOR KIT
PRODUCT DESCRIPTION 2008-11 XL SPORTSTER
0207-2003
5 LED LIGHTS IN ONE ARC-SHAPED WEATHER-PROOF UNIT • 12” LONG WIRING LEAD • WIRE INSULATION COLOR MATCHED TO OEM WIRING FOR EASE OF INSTALLATION • WIRES MUST BE SOLDERED AND HEAT SHRUNK TO OEM HARNESS FOR • PROPER INSTALLATION
35
CLIP ONS The RSD Clip Ons mount to the front forks, below the top triple clamp, for a low handlebar position. They utilize all stock wiring, so there is no cutting or soldering. The aluminum bars are dimple milled to allow for stock wiring to cleanly exit your stock switch housings.
CLIP-ON BLACK
• ADJUSTABLE TO ANY PULLBACK AND ANY HEIGHT BETWEEN TOP AND BOTTOM TRIPLE CLAMPS • FIXED 5 DEGREE DOWN ANGLE • REPLACES TOP MOUNTED HANDLEBARS AND RISERS • BAR IS 1” DIAMETER TO ACCEPT STOCK OR AFTERMARKET HAND CONTROLS • BARS SLOTTED FOR EXTERNAL WIRING AND BLACK ANODIZED
CLIP-ON CHROME
*INTERCHANGEABLE RSD LOGO BADGES (BLACK & BRASS)
CAFÉ CLIP ONS 39mm
PRODUCT DESCRIPTION 1988-11 XL & 1988-03 FXR w/39mm FORKS
36
BLACK
CHROME
0208-2039-B
0208-2039-CH
FRONT MASTER CYLINDER CAPS
CHROME
Stylize your OEM hand controls with RSD’s stock replacement front brake master cylinder cap. REPLACES CAP ON STOCK MASTER CYLINDERS • 2008-2011 FL
*INTERCHANGEABLE RSD LOGO BADGES (BLACK & BRASS)
2006-2011 SOFTAIL & DYNA & 2005-2007 FL 1996-2003 XL (SPORTSTER), 2002-2005 V-ROD, 1996-2005 SOFTAIL & DYNA & 1996-2004 FL
2004-2011 XL(SPORTSTER) FRONT MASTER CYLINDER CAP
PRODUCT DESCRIPTION
BLACK-OPS
FL 2008-11
0208-2035-SMB
CONTRAST CUT 0208-2035-BM
CHROME 0208-2035-CH
FL 2005-07, DYNA 2006-11
0208-2036-SMB
0208-2036-BM
0208-2036-CH
XL96-03,VRSC02-05,ST/DY 96-05
0208-2037-SMB
0208-2037-BM
0208-2037-CH
XL 2004-11
0208-2038-SMB
0208-2038-BM
0208-2038-CH
37
VINTAGE KIT
38
THE NEW VINTAGE The Vintage Softail Conversion Kit is available in individual components to tailor your bike to your unique style and budget. Each group is engineered to fit seamlessly together with minimal effort by you. The result is a dramatic transformation of the standard Softail into a period style bobber that retains the bulk of the OEM bike for an easy to build, easy to insure and easy to ride motorcycle, with minimal fabrication.
BEFORE
AFTER
39
TRACKER REAR FENDER KIT Our steel struts in this fender kit are the perfect example of reduction of cost without compromising quality. We lost the billet and went with a steel strut giving you a bitchin’ steel part that matches our existing steel products and reduces cost while maintaining strength, function and form.
200MM
DIRECT BOLT-ON TO HD SOFTAILS (EXCEPT ROCKER) • STRUTS MADE FROM 3/8” THICK 1018 STEEL AND AVAILABLE IN • CHROME OR BLACK POWDERCOAT FINISHES 9” FENDER MADE FROM 1018 STEEL AND AVAILABLE IN RAW FINISH ONLY • REAR FENDER AND STRUTS AVAILABLE SEPARATELY FOR USE WITH MANY • OTHER CUSTOM FENDERS QUALITY SHEET METAL WORK REQUIRES MINIMAL PREPARATION FOR PAINT • *REQUIRES FENDER SUPPORTS TO BE CUT OFF FROM STOCK CHASSIS ON 1990-2007 MODELS
FORMED STEEL STRUTS CHROME
TR ACKER REAR FENDER CONVERSION KIT
PRODUCT DESCRIPTION
BLACK
POWDERCOATED
CHROME
STEEL STRUTS, 2008-11 SOFTAIL
0215-2004-BP
0215-2004-CH
STEEL STRUTS ,1990-07 SOFTAIL
0215-2002-BP
0215-2002-CH
STEEL 200 MM STRUTS ONLY
PRODUCT DESCRIPTION
BLACK
40
BLACK
POWDERCOATED
CHROME
2008-11 SOFTAIL
0215-2003-BP
0215-2003-CH
1990-07 SOFTAIL
0215-2001-BP
0215-2001-CH
200 MM VINTAGE REAR FENDER
PRODUCT DESCRIPTION 1990 - 2011 SOFTAIL W/ S200 MM REAR TIRE
BLACK
POWDERCOATED
0174-0053
VINTAGE REAR FENDER KIT A clean rear end is critical when customizing your Softail. With our Vintage rear fender kit and struts we have done all the hard work for you. Our boltvon fender and struts are guaranteed to vastly improve the tail end of your bike. Beautifully machined billet struts and our tire hugging steel rear fender are the perfect start to turning your stock bike into something special. Available for both 200mm and 240mm rear tires. • DIRECT BOLT-ON TO HD SOFTAILS (EXCEPT ROCKER)
• FENDER MADE FROM 1018 STEEL AND AVAILABLE IN RAW FINISH ONLY • REAR FENDER AND STRUTS AVAILABLE SEPARATELY FOR USE WITH MANY OTHER CUSTOM FENDERS • QUALITY SHEET METAL WORK REQUIRES MINIMAL PREPARATION FOR PAINT *REQUIRES FENDER SUPPORTS TO BE CUT OFF FROM STOCK CHASSIS ON 1990-2007 MODELS
200MM KIT
BILLET STRUTS
VINTAGE REAR FENDER CONVERSION KIT 200 200 MM FENDER KIT - FENDER AND STRUTS PRODUCT DESCRIPTION
CHROME
2008-11 SOFTAIL W/ 200 MM REAR TIRE
0173-1850
1990-07 SOFTAIL W/ 200 MM REAR TIRE
0174-1804
BILLET 200 MM STRUTS ONLY PRODUCT DESCRIPTION
CHROME
2008-11 SOFTAIL W/ 200 MM REAR TIRE
0023-9931TC-2-CH
1990-07 SOFTAIL W/ 200 MM REAR TIRE
0023-9926TC-2-CH
200 MM VINTAGE REAR FENDER ONLY
240MM KIT
PRODUCT DESCRIPTION
CHROME
1990-11 SOFTAIL W/ S200 MM REAR TIRE
0174-0053
VINTAGE REAR FENDER CONVERSION KIT 240 240 MM FENDER KIT - FENDER AND STRUTS PRODUCT DESCRIPTION 1990-07 SOFTAIL W/ 240 MM REAR TIRE
CHROME 0173-1804
BILLET 240 MM STRUTS ONLY PRODUCT DESCRIPTION
CHROME
1990-07 SOFTAIL W/ 240 MM REAR TIRE
0023-9926ADC-CH
240 MM VINTAGE REAR FENDER ONLY PRODUCT DESCRIPTION FOR 240 MM TIRE
CHROME 0174-0052
41
VINTAGE GAS TANK KIT Developed as a timeless bobber-style tank; our Vintage Gas Tank was designed for those who appreciate the past and all its style. Think pin-ups and the girl next door, you get the best of both worlds. APPROXIMATELY 3 GALLON FUEL CAPACITY • AVAILABLE FOR FUEL INJECTED AND CARBURETED SOFTAIL MODELS • (FUEL INJECTION TANK INCLUDES RSD “GAS IT” KIT SEE PAGE 23)
BACKBONE COVER HIDES OEM WIRING AND RELOCATES YOUR STOCK IGNITIONSWITCH • NO FABRICATION REQUIRED • ACCEPTS RSD GAS CAPS OR L96-11 STOCK REPLACEMENT VENTED GAS CAPS • NOT LEGAL FOR SALES OR USE ON POLLUTION CONTROLLED VEHICLES* 2008-11 MODELS REQUIRE USE OF 2001-07 OEM DELPHI FUEL INJECTION COMPONENTS*
VINTAGE GAS TANK CONVERSION KIT GAS TANK KIT - TANK AND COVER
PRODUCT DESCRIPTION
PART#
2000-06 SOFTAIL CARBURETED
0173-1844
FUEL TANK VINTAGE
PRODUCT DESCRIPTION
PART#
2000-06 SOFTAIL CARBURETED
0173-1022
BACKBONE COVER VINTAGE
PRODUCT DESCRIPTION
PART#
2000-11 SOFTAIL CARBURETED
0173-1098
VINTAGE GAS TANK W/ GAS-IT FUEL INJECTION KIT
PRODUCT DESCRIPTION *GAS TANK W/ GAS-IT KIT INSTALLED
42
2001-11 SOFTAIL FUEL INJECTED
PART# 0173-1845
GAS-IT KIT Building a custom tank for your fuel injected Harley? Wondering how to cram all that fuel injection equipment into the tank? With the RSD Gas-It Kit, your stock HD fuel injection parts are removed and relocated inside the tank, allowing a clean, uncluttered tank face, while maintaining the fuel injection we all love so much.
EXTERNAL VIEW
• RELOCATES OEM 01-07 DELPHI FUEL PUMP, FUEL PRESSURE REGULATOR, FUEL FILTER & FUEL LEVEL SENDING UNIT TO THE UNDERSIDE OF YOUR CUSTOM TANK • A SMOOTH AND RELIABLE WAY TO HIDE ALL FUEL INJECTION COMPONENTS • INCLUDES BILLET MACHINED STEEL WELD-IN PLATE, 3.75” X 8” ALUMINUM MANIFOLD • SAME KIT THAT IS INCLUDED WITH RSD FUEL INJECTED GAS TANK KIT • REQUIRES VENTED TANK OR VENTED GAS CAP *CUSTOM FABRICATION AND WELDING REQUIRED *YOUR CUSTOM TANK’S BOTTOM MUST BE RELATIVELY FLAT TO ACCOMMODATE PART INSTALLATION * NOT LEGAL FOR SALE OR USE ON POLLUTION CONTROLLED VEHICLES
GAS IT KIT PRODUCT DESCRIPTION
PART#
2001 - 11 SOFTAIL DELPHI FUEL INJECTED
0173-1837
Gas-It Kit uses existing fuel pump components from your fuel injected Softail. If starting from scratch, you must purchase all of the following components from your local Harley-Davidson dealer for 2001-2007 Delphi systems.
OEM PART#
PRODUCT DESCRIPTION
27408-01
FUEL PRESSURE REGULATOR
61001-01
FUEL FILTER KIT, INCLUDES CLAMPS, O-RING AND HOSE
75300-05
FUEL SENDER KIT
62897-01B
PUMP ASSEMBLY
62189-01A
CHECK VALVE ASSEMBLY WITH O-RING
INTERNAL VIEW
43
VINTAGE SOLO SEAT Being comfortable is the key to a great day of high-mileage riding. When it comes to comfort, we know the importance of cushioning, so we designed this seat for those riders needing a little extra padding. Fits seamlessly with your RSD Vintage Gas Tank and 200mm Rear Fender Kit. DIRECT BOLT-ON TO HD SOFTAILS (USING RSD 200MM FENDER) • ERGONOMIC SHAPE KEEPS RIDER SEATED FIRMLY AND COMFORTABLY • BLACK PERFORATED VINYL COVER • ROLAND SANDS SIGNATURE LOGO TAG STITCHED INTO SEAM • CONTROLLED DENSITY POLYURETHANE FOAM • BASEPLATE IS MARINE GRADE FIBERGLASS • SEAT WIDTH IS 11” • MANUFACTURED BY MUSTANG SEATS •
NOTE: 2001-11 FUEL INJECTED MODELS WILL REQUIRE A YUASA BATTERY (YTX15L-BS) TO ALLOW RELOCATION OF THE ECM
44
PRODUCT DESCRIPTION
PART#
2000-2011 SOFTAIL USING RSD 200MM REAR FENDER KIT
0214-2002
HANG LO 2-UP SEAT
Finally a bagger seat that goes with the flow. Rather than disrupting the lines of the HD bagger we worked hard to hand shape a seat that is as comfortable as it is stylish. Our seats are hand crafted in the USA by Mustang seat company and feature the highest quality materials and padding for both you and your passenger.
ERGONOMIC SHAPE KEEPS RIDER SEATED FIRMLY AND COMFORTABLY • BLACK PERFORATED VINYL COVER • CONTROLLED DENSITY POLYURETHANE FOAM • BASEPLATE IS MARINE GRADE FIBERGLASS • ROLAND SANDS SIGNATURE LOGO TAG STITCHED INTO SEAM • FRONT SEAT WIDTH IS 11.5” • REAR SEAT WIDTH IS 7” • MANUFACTURED BY MUSTANG SEATS •
CONTACT MUSTANG TO ORDER:
WWW.MUSTANGSEATS.COM 860-582-9633
45
DYNa FIGHTER
46
We finally got the opportunity to sink our teeth into HD’s best handling big bore Vtwin, the Dyna. The goal was to maintain the stock sheet metal and stance while improving the handling and acceleration using all the RSD parts we have available for the Dyna. A little extra fab and some paint and the Dyna Fighter is born. This project got us going on a slew of new ideas. Take a closer look and check out the license plate bracket/ tail light, chain guard, engine covers, fork brace, tank belt and gauge relocation. Coming to a shop near you.
PARTS WISH LIST - DYNA FIGHTER
PRODUCT DESCRIPTION
PART # BUY
TRACKER GRIPS (CABLE) BLACK-OPS
0063-2019-SMB
ROCKERBOX COVERS - CONTRAST CUT
0177-2018-BH
TIMING COVER - CONTRAST CUT
0177-2001-BH
6-SPEED TRANNY COVER - CONTRAST CUT
0203-2002-BH
TRACKER GAS CAP BLACK-OPS
0210-2007-SMB
47
HANDLEBARS
48
T-BAR The RSD T-bar is an original take on a timeless design. We took the classic T-bar shape and added our signature radius ribbing for an extra detail. Not to tall, not to short these bars are perfect for a clean yet comfortable ride while still looking tough. • ONE OF A KIND “RIBBED” ACCENTS • 1” DIAMETER TO ACCEPT STOCK OR AFTERMARKET HAND CONTROLS AND/OR HYDRAULIC CLUTCH • 27” WIDE X 6” RISE X 4” PULL BACK • 6” TALL INTEGRATED RISERS WITH 3-1/2” ON-CENTER BOLT PATTERN • SLOTTED FOR STOCK HAND CONTROLS (LOWER WIRING HOLES MUST BE DRILLED BY INSTALLER FOR INTERNAL WIRING) • INTERNALLY THREADED FOR ½”-13 HARDWARE (NOT INCLUDED)
CHROME
PULLBACK
WIDTH
RISE
6” RIBBED T-BAR
PRODUCT DESCRIPTION STANDARD
CHROME
CENTER
0173-1855-CH
49
CH R O M E
VINTAGE The Vintage bar is RSD’s twist on the classic ape hanger… The true “Made in America” original gusseted ape and its flowing radius tubes and riding position are unmatched in style, design and quality. The stance will give you the aggressive yet comfortable riding position you are looking for and our end caps make it extremely easy to run internal wiring. If quality and originality are important to you, then look no further. AVAILABLE FOR STANDARD AND SPRINGER APPLICATIONS • 1” DIAMETER TO ACCEPT STOCK OR AFTERMARKET HAND CONTROLS • 30” WIDE X 12” RISE X 6-1/2” CENTER WIDTH X 4’’ PULLBACK • CHROME AND BLACK POWDER COAT BARS ARE SLOTTED• AND DRILLED FOR INTERNAL WIRING STANDARD BARS FEATURE KNURLING FOR RISERS AT 3-1/2” ON-CENTER • SPRINGER BARS FEATURE KNURLING FOR RISERS AT 4-3/4” ON-CENTER • STYLISH MULTI-HOLE DRILLED CORNER GUSSET OFFERS STRENGTH AND RIGIDITY • CHROME BILLET ALUMINUM END CAPS INCLUDED • NOTE: SPRINGER BARS ARE NOT FOR USE WITH OEM CROSSBONES FLSTSB (X-BONES) OEM RISERS.
PULLBACK
WIDTH
BLACK POWDER COAT
RISE
CENTER
1-INCH VINTAGE HANDLEBARS PRODUCT DESCRIPTION
50
BLACK POWDERCOAT
CHROME
RAW
STANDARD
0173-1838-BP
0173-1838-CH
0173-1838
SPRINGER
0173-1839-BP
0173-1839-CH
0173-1839
VINTAGE KING APE It seems like you can never make an ape hanger bar too big so we shot for the sky with our King Ape. We borrowed some style from our classic Vintage bar and made everything a little larger, including the tubing diameter to give you a punk tall bar with attitude, style and quality hand TIG welding. No swaging or uneven surfaces on these bars. If you’re looking for high quality, look no further. • 1-1/4” DIAMETER BARS WITH 1” DIAMETER CENTER MOUNTING SURFACE AND CONTROL CLAMPING SURFACE • ACCEPTS STOCK OR AFTERMARKET HAND CONTROLS, HANDLEBAR CLAMPS AND RISERS • ALLOWS USE OF AFTERMARKET HYDRAULIC CLUTCH MASTER CYLINDERS • 19’’ STYLE- 38” WIDE X 19” RISE X 9-3/4” CENTER WIDTH X 6-1/4’’ PULLBACK • 16’’ STYLE - 36-1/2” WIDE X 16” RISE X 9-3/4” CENTER WIDTH X 6’’ PULLBACK • CHROME AND BLACK POWDER-COATED FINISH, • SLOTTED AND DRILLED FOR INTERNAL WIRING • KNURLING FOR RISERS AT 3-1/2” ON-CENTER (NON-SPRINGER) • STYLISH MULTI-HOLE DRILLED CORNER GUSSET OFFERS STRENGTH AND RIGIDITY
PRODUCT DESCRIPTION
0173-1852-BP
CHROME 0173-1852-CH
PO W
STANDARD
BLACK POWDERCOAT
BLACK POWDERCOAT 0173-1853-BP
CHROME
RISE
T COA
STANDARD
DER
1-1/8” KING APE HANDLEBAR 19”
PRODUCT DESCRIPTION
CK BL A
1-1/8” KING APE HANDLEBAR 16”
PULLBACK
WIDTH
CHROME
0173-1853-CH CENTER
51
VINTAGE SHORT STACK Simply a shorter version of the Vintage bars. The short stack bars give you all the same features but with less stretch of the down tubes.
ME
AVAILABLE FOR STANDARD OR SPRINGER APPLICATIONS • 1” DIAMETER TO ACCEPT STOCK OR AFTERMARKET HAND CONTROLS • 30” WIDE X 7-1/2” RISE X 6-1/2” CENTER WIDTH X 3-3/4’’ PULLBACK • SLOTTED AND DRILLED FOR INTERNAL WIRING • STANDARD BARS FEATURE KNURLING FOR RISERS AT 3-1/2” ON-CENTER • SPRINGER BARS FEATURE KNURLING FOR RISERS AT 4-3/4” ON-CENTER • STYLISH MULTI-HOLE DRILLED CORNER GUSSET OFFERS STRENGTH AND RIGIDITY •
CH
RO
CHROME BILLET ALUMINUM END CAPS INCLUDED NOTE: SPRINGER BARS ARE NOT FOR USE WITH OEM CROSSBONES RISERS
PULLBACK
WIDTH
RISE
1-INCH VINTAGE SHORT STACK HANDLEBARS CENTER
BLACK POWDER COAT
PRODUCT DESCRIPTION
END CAPS
BLACK
POWDERCOAT
CHROME
RAW
STANDARD
0173-1828-BP
0173-1828-CH
0173-1828
SPRINGER
0173-1830-BP
0173-1830-CH
0173-1830
REPLACEMENT END CAPS-4 PACK
PRODUCT DESCRIPTION MOON END CAP KIT
52
RAW
CHROME
0173-1812
0173-1812-CH
RIBBED BOBBER
CH
RO
• AVAILABLE FOR STANDARD APPLICATIONS ONLY • 1” DIAMETER TO ACCEPT STOCK OR AFTERMARKET HAND CONTROLS • 33” WIDE X 9” RISE X 5-3/4” CENTER WIDTH X 5-1/2 PULLBACK • SLOTTED AND DRILLED FOR INTERNAL WIRING • KNURLING FOR RISERS AT 3-1/2” ON-CENTER (NON SPRINGER) • STYLISH RIBBED ACCENTS ARE ONE OF A KIND
ME
A New Classic for those who love the simple lines of a short ape hanger with a little extra style. CNC milled ribbed accents designed to match our Nostalgia ribbed cover line, these bars are a stand out and a beautiful finishing touch to any custom build or customized stocker. Hand built and TIG welded in the good ol’ USA.
PULLBACK
WIDTH
RISE
CENTER
RIBBED BOBBER HANDLEBARS PRODUCT DESCRIPTION
CHROME
STANDARD
0173-1854-CH
53
LAZY BOY
PULLBACK
WIDTH
Designed for the big cruiser, these bars are bent so you can relax and enjoy your Sunday ride with the utmost comfort. FITMENTS AVAILABLE FOR ALL FLHT MODELS WITH • BATWING FAIRINGS 1” DIAMETER TO ACCEPT STOCK OR AFTERMARKET • HAND CONTROLS WILL WORK WITH STOCK CABLES AND BRAKE LINES • 33” WIDE X 9” RISE X 14” CENTER WIDTH X 5-3/4” PULLBACK • SLOTTED AND DRILLED TO ALLOW INTERNAL WIRING • KNURLING FOR RISERS AT 3/-1/2” ON-CENTER • STYLISH MULTI-HOLE DRILLED CORNER GUSSET OFFERS • STRENGTH AND RIGIDITY BILLET ALUMINUM END CAPS INCLUDED •
RISE
CENTER
COAT WDER O P K BLAC
LAZY BOY HANDLEBARS
PRODUCT DESCRIPTION
CH R O
54
ME
BLACK POWDERCOAT
CHROME
2008-11 FLHT/FLHX
0173-1843-BP
0173-1843-CH
1986-07 FLHT/FLHX
0173-1833-BP
0173-1833-CH
REPLACEMENT END CAPS-4 PACK
PRODUCT DESCRIPTION MOON END CAP KIT
RAW
CHROME
0173-1812
0173-1812-CH
CONVOY WD ER
CO
AT
Add style and attitude with a slightly higher hand position for an aggressive feel, giving more control than the stock bar.
BL
AC K
PO
• AVAILABLE FOR ALL FLHT MODELS WITH BATWING FAIRINGS • 1” DIAMETER TO ACCEPT STOCK OR AFTERMARKET HAND CONTROLS • WILL WORK WITH STOCK CABLES AND BRAKE LINES • 34.4” WIDE X 9” RISE X 14.75” CENTER WIDTH X 6” PULLBACK • SLOTTED AND DRILLED TO ALLOW INTERNAL WIRING • KNURLING FOR RISERS AT 4” ON-CENTER • STYLISH MULTI-HOLE DRILLED CORNER GUSSET OFFERS STRENGTH AND RIGIDITY • BILLET ALUMINUM END CAPS INCLUDED
PULLBACK
WIDTH
CONVOY HANDLEBARS
PRODUCT DESCRIPTION
BLACK POWDERCOAT
CHROME
2008-11 FLHT/FLHX
0173-1841-BP
0173-1841-CH
1986-07 FLHT/FLHX
0173-1832-BP
0173-1832-CH
REPLACEMENT END CAPS-4 PACK
PRODUCT DESCRIPTION MOON END CAP KIT
RAW
CHROME
0173-1812
0173-1812-CH
RISE
CENTER
CH R O M
E
55
GLIDER
PULLBACK
WIDTH
Bent similar to stock bars for the rider who wants style but doesn't want to change hand position. Soar across the open road with this perfect cohesion of style and comfort.
RISE CENTER
OW CK P BL A
AVAILABLE FOR ALL FLTR MODELS WITH FAIRINGS • 1” DIAMETER TO ACCEPT STOCK OR AFTERMARKET HAND CONTROLS • WILL WORK WITH STOCK CABLES AND BRAKE LINES • 33” WIDE X 9” RISE X 7-3/4” CENTER WIDTH X 4” PULLBACK • SLOTTED AND DRILLED TO ALLOW INTERNAL WIRING • KNURLING FOR RISERS AT 3/-1/8” ON-CENTER • STYLISH MULTI-HOLE DRILLED CORNER GUSSET OFFERS • STRENGTH AND RIGIDITY
BILLET ALUMINUM END CAPS INCLUDED
COAT DER
GLIDER HANDLEBARS
PRODUCT DESCRIPTION
BLACK POWDERCOAT
CHROME
2008-2011 FLTR
0173-1842-BP
0173-1842-CH
1998-07 FLTR
0173-1831-BP
0173-1831-CH
REPLACEMENT END CAPS-4 PACK
PRODUCT DESCRIPTION CHROME
56
MOON END CAP KIT
RAW
CHROME
0173-1812
0173-1812-CH
FLAT-OUT DRAG
Built for down low, no frills riding. Our most aggressive bend for those that want to keep their head down and the speed up.
K AC L B
W PO
R DE
CO
AT
• 1” DIAMETER TO ACCEPT STOCK OR AFTERMARKET HAND CONTROLS • SLOTTED AND DRILLED FOR INTERNAL WIRING • TO CLEAR STOCK SOFTAIL TANK, USE RIBBED RISER EXTENSION(PG. 62) • 32” WIDE X 1-1/2” RISE X 4” PULLBACK • INTEGRATED RISERS ARE THREADED AT 3/-1/2” ON-CENTER WITH 1/2”-13 THREADS TO FIT MOST STOCK HD APPLICATIONS FROM 1974-2011 *BLACK POWDER COAT IS A GLOSS FINISH
PULLBACK
WIDTH
CHROME
RISE CENTER
1” FLAT OUT DR AG HANDLEBAR
PRODUCT DESCRIPTION
BLACK POWDERCOAT
FITS MOST STOCK HD MODELS
0173-1827-BP
CHROME 0173-1827-CH
57
MOTO RISERS
CHROME
CHROME
Different than anything on the market today and inspired by Motocross styling, these risers offer a plethora of combinations to get the right height and look for any bike.
BLACK ANODIZED
ACCEPT STOCK OR AFTERMARKET 1” DIAMETER HANDLEBARS • THREE HEIGHT OPTIONS: 1-1/2”, 3” OR 5” • CHROME PINCH BOLTS INCLUDED • DRILLED AND TAPPED FOR 1/2”-13 MOUNTING BOLTS •
BLACK ANODIZED
3”
5”
3”
5” CHROME
FLAT-OUT RISERS
Designed to compliment our Flat-Out Drag handlebars and give crucial lift in order to clear a stock Softail tank. They can also be used to offer extra lift to any risers and add style to the front of your bike. Ribbing matches the RSD Nostalgia Cover Line.
BLACK ANODIZED
1.5”
MOTO RISERS
PRODUCT DESCRIPTION
1.5”
58
CHROME
MOTO RISER 1-1/2" TALL
0208-2030-B
0208-2030-CH
MOTO RISER 3" TALL
0208-2031-B
0208-2031-CH
MOTO RISER 5" TALL
0208-2032-B
0208-2032-CH
CHROME
PRODUCT DESCRIPTION RIBBED RISER EXTENSION
• Lifts Bars 2-1/4” • Allows Use Of Flat-Out Drag Bars On Stock HD Softail Gas Tank • 1/2”- 13 Mounting Hardware Included • Mounts Between Handlebar And Triple Clamp
BLACK
BLACK POWDER COAT
BLACK 0208-2033-B
CHROME 0208-2033-CH
MOTO FOOT PEGS
Inspired by our passion for motocross styling, we decided to bring a little dirt to the road. Intentionally designed with a featherweight, ventilated body and aggressive tooth pattern for performance and grip.
BLACK ANODIZED
• DIRECT STOCK REPLACEMENT FOR HD MALE MOUNT PEGS • FITS DRIVER AND PASSENGER MOUNTS • CHROME MOUNTING HARDWARE KIT SOLD SEPARATELY *STRAIGHT MALE MOUNT PEGS (PICTURED) ARE USED ON ALL HD MODELS, INCLUDING SPORTSTER AND DYNA PASSENGER PEG APPLICATIONS. *45°MALE MOUNT PEGS ARE USED ON ALL SPORTSTER AND DYNA DRIVER PEG APPLICATIONS.
CHROME
MOTO FOOT PEGS
PRODUCT DESCRIPTION
BLACK
CHROME
HD MODELS W/ STRAIGHT MALE MOUNT
0035-0084-B
0035-0084-CH
HD MODELS W/ 45 DEGREE MALE MOUNT
0205-2008-B
0205-2008-CH
CHROME MOUNTING HARDWARE KIT SOLD SEPAR ATELY
PRODUCT DESCRIPTION HARDWARE KIT
CHROME 0109-1021
59
TRACKER GRIPS Comfort and control are obviously very important when ripping down the highway or through the twisties. We are big fans of being in control and our Renthal wrapped Tracker Grips are the perfect link from your hands to your bike. Tacky comfortable rubber with a profile that matches the contour of your hand are critical and the tracker grips provide that combo. CNC-Machined From Billet Aluminum • Renthal™ Grip Rubber Material • RSD Laser Engraved Logo •
CON TRA ST CUT ™
CHR O
ME
TR ACKER GRIPS
60
PRODUCT DESCRIPTION CONTRAST CUT
CHROME
1982-11 HD DUAL CABLE MODELS
0063-2019-BM
0063-2019-CH
2008-11 FL MODELS W/ ELECTRONIC THROTTLE CONTROL
0063-2022-BM
0063-2022-CH
TRACKER GRIPS We love our Renthal wrapped tracker grips so much we just can’t help ourselves but to want to make them in every finish we offer. So here you go. Black Ops and Brass, enjoy them no matter what flavor you prefer. • CNC-Machined From Billet Aluminum • Renthal™ Grip Rubber Material • RSD Laser Engraved Logo
BR A SS
BLA CKOPS
TR ACKER GRIPS PRODUCT DESCRIPTION
BRASS
BLACK-OPS
1982-11 HD DUAL CABLE MODELS
0063-2030
0063-2019-SMB
2008-11 FL MODELS W/ ELECTRONIC THROTTLE CONTROL
0063-2031
0063-2022-SMB
61 PRODUCT DESCRIPTION
PART#
SUG.RETAIL
xr-1200
62
What do you do when the boys in Milwaukee produce a great handling HD. At RSD we tear it apart and start over. We started by chopping the entire back half of the bike off along with an extra 60 or so pounds. First was the addition of a complete Ohlins rear shock and linkage from a Ducati 1098, hand built one off single sided swing-arm, sub-frame, tail-section and lighting. Next came the Ohlins fork, PM radial mount brakes, clip ons, custom number plate and gauge mount along with a one off Vance and Hines Exhaust. We finished her off with a custom belly pan and foot controls with RSD crash sliders and Black Ops Turbo Wheels. Our boy Justyn with Eagle Riders in San Diego is most likely molesting this machine as we speak.
63
MOTORCOVERS
64
NOSTALGIA COVER LINE We are constantly looking to the past and migrating old designs into the future. Our Nostalgia Cover Line products are a perfect example of that blend and they transform a twincam HD motor into something special. Beautifully machined from Billet Aluminum, we have you covered with three finish options, Chrome, Black Anodize and our newest offering, Contrast Cut, where the covers are hand sanded for a unique handcrafted look.
CONTRAST CUT
ROCKER BOXES
Designed as a direct replacement for your stock valve cover, sold as a pair.
BL AC K
AN
OD IZ ED
CH RO M
E
• LASER ENGRAVED RSD LOGO • CHROME HARDWARE INCLUDED • GASKETS INCLUDED
nostalgia rocker box covers PRODUCT DESCRIPTION 1999-11 TWIN CAM
BLACK 0177-2002-B
CONTRAST CUT 0177-2018-BH
CHROME 0177-2002-CH
65
TIMING Designed as a direct replacement for your stock Timing/Cam cover. LASER ENGRAVED RSD LOGO • CHROME HARDWARE INCLUDED • GASKET INCLUDED •
A CONTR
K BLAC
T ST CU
ZED A NODI
nostalgia timing cover PRODUCT DESCRIPTION
66
1999-11 TWIN CAM
BLACK 0177-2001-B
CONTRAST CUT 0177-2001-BH
CHROME 0177-2001-CH
TRANSMISSION Designed as a direct replacement for your stock top transmission cover. • LASER ENGRAVED RSD LOGO • CHROME HARDWARE INCLUDED • GASKET INCLUDED CHR O
ME
BLA CK A NO DIZ ED CONTRAST CUT
nostalgia 6 SPEED TRANSMISSION COVER PRODUCT DESCRIPTION 2007-11 Softails, 2007-11 FL, 2006-11 DYNA
BLACK 0203-2001-B
CONTRAST CUT 0203-2002-BH
CHROME 0203-2001-CH
67
CHROME
CONTRAST CUT
IGNITION/POINTS
BLACK ANODIZED
GASKETS INCLUDED
Designed as a direct replacement for your stock timing cover.
68
nostalgia ignition/POINTS cover PRODUCT DESCRIPTION
BLACK
CONTRAST CUT
CHROME
1999-11 TWIN CAM (5 HOLE)
0177-2013-B
0177-2013-BH
0177-2013-CH
1970-99 BIG TWIN-EXCEPT TWIN CAM, 2004-11 XL (2 HOLE)
0177-2012-B
0177-2012-BH
0177-2012-CH
DERBY
CHROME
CONTRAST CUT
BLACK ANODIZED
Designed as a direct replacement for your stock derby cover on your OEM primary.
nostalgia derby covers PRODUCT DESCRIPTION
BLACK
CONTRAST CUT
CHROME
1999-11 TWIN CAM (5 HOLE)
0177-2011-B
0177-2011-BH
0177-2011-CH
1970-98 BIG TWIN (3 HOLE)
0177-2009-B
0177-2009-BH
0177-2009-CH
INSPECTION Designed as a direct replacement for your chain tension inspection cover on your OEM primary. • LASER ENGRAVED RSD LOGO • CHROME HARDWARE INCLUDED • GASKETS INCLUDED
nostalgia inspection cover PRODUCT DESCRIPTION 1970-06 FX/FL, FXST/FLST, FXWG, 1993-05 FXDWG
BLACK 0177-2014-B
CONTRAST CUT 0177-2014-BH
CHROME 0177-2014-CH
69
SATIN BAGGER
70
This simple yet effective custom bagger really shows off what the RSD product line can do for your bagger. We threw on an ultra high performance radial mount Marzocchi fork coupled with huge dual discs and the entire line of RSD parts to create a comfortable streetglide that handles every bit as good as it looks. Clean, comfortable and fun to ride. What more can you ask for? PARTS WISH LIST - SATIN BAGGER PRODUCT DESCRIPTION
PART #
BOSS(CONTRAST CUT) 21X3.5” FRONT WHEEL
1204-7106R-BSS-BM
BOSS(CONTRAST CUT) DUAL 13” FRONT DISC
0133-3015BSSS-BM
BOSS(CONTRAST CUT) 18X5.5” REAR WHEEL
1269-7814R-BSS-BM
BOSS(CONTRAST CUT) 11.8” REAR DISC
0133-1802BSSS-BM
TURBINE AIR CLEANER (CONTRAST CUT)
BUY
0206-2038-BM
COVERLINE (BLACK) CONVOY (BLACK POWDER) HANDLEBARS
0173-1841-BP
TRACKER (CONTRAST CUT) GRIPS
0063-2022-BM
HANG LO 2-UP SEAT
71
HANDCRAFTED
72
TAG BRACKET This handcrafted, steel bracket is designed to bolt directly to the OEM passenger foot peg hole and vertically mount your license plate. The dual circuit LED light works as both tail and brake light. The rifled tail-light housing and beehive shaped lens give you a classic hot rod style. We have been building these for years and now they are available for you. • MAIN BRACKET MADE FROM 3/16˝ LASER CUT 1018 STEEL • LED DUAL CIRCUIT TAIL/BRAKE LIGHT • BILLET ALUMINUM TAIL-LIGHT HOUSING AND RETAINER RING • LASER ENGRAVED WITH RSD LOGO • BILLET ALUMINUM LICENSE PLATE FRAME • RED POLY CARBONATE TAILLIGHT LENS • CHROME HARDWARE INCLUDED *NOT LEGAL IN SOME STATES *LIGHT DOES NOT MEET DOT APPROVAL *EASILY ADAPTABLE TO MOST CUSTOM BIKES
M RO CH
E
K AC BL
PO
ER WD
AT CO
tracker tag bracket PRODUCT DESCRIPTION
BLACK POWDERCOAT
1984-11 FXST/FLST
0215-2000-BP
CHROME 0215-2000-CH
73
TOP MOTOR MOUNT We offer this made in the USA handcrafted, beautifully polished stainless steel bracket in two configurations. One to retain the stock placement of your ignition coil and the other to relocate the coil to the top of the motor mount. STOCK REPLACEMENT VERSION
DIRECT REPLACEMENT FOR STOCK MOUNT • POLISHED STAINLESS STEEL CONSTRUCTION • BILLET COIL BRACKET INCLUDED WITH COIL• RELOCATION MOTOR MOUNT SPARK PLUG WIRES REQUIRED FOR USE OF • MOTOR MOUNT WITH COIL RELOCATION (DRAG PART # 7806-1556) ALL CHROME MOUNTING HARDWARE INCLUDED
CUSTOM W/COIL RELOCATION
COIL BRACKET
(FOR USE WITH STOCK TANK)
nostalgia top motor mount
74
PRODUCT DESCRIPTION
PART #
2000-11 TWIN CAM SOFTAIL WITH COIL RE-LOCATION
0205-2000
2000-11 TWIN CAM SOFTAIL - STOCK REPLACEMENT
0205-2007
2004-11 DYNA
0205-2010
SPORTSTER COIL IGNITION RELOCATOR Our Coil Ignition Relocator moves the coil and ignition switch from under the neck of your Sportster to between the V of your motor and removes the plastic wire caddy, to expose the frame of your bike above the front cylinder. • RELOCATES LOCATION OF COIL AND IGNITION SWITCH • ALLOWS REMOVAL OF PLASTIC WIRE HARNESS CADDY • POLISHED STAINLESS STEEL CONSTRUCTION • NEW SPARK PLUG WIRES REQUIRED FOR USE (DRAG PART# 7806-1556)
COIL IGNITION RELOCATOR PRODUCT DESCRIPTION
PART #
2007-11 XL
0205-2009
75
NARROWGLIDE FORK BRACE Simplification in the name of function is what our fork brace is all about. It allows you to get rid of the front fender without losing the integrity of the suspension. Eliminates fork twist and increases rigidity from stock while looking damn good. Available in chrome and black-powder coat finishes with a riveted brass antique RSD logo badge. You can scotch brite the chrome for a fantastic brushed nickel look.
BLACK POWDER COAT
CHROME
REPLACES FRONT FENDER ON NARROWGLIDE FORKS • LASER CUT FROM 3/16˝ 1018 STEEL • PRACTICALLY ELIMINATES FRONT FORK FLEX • FOR USE WITH A 19˝OR 21˝ FRONT WHEEL/TIRE • STAMPED BRASS RSD LOGO BADGE •
CHROME HARDWARE INCLUDED
*BLACK POWDER-COAT IS A GLOSS FINISH *NOT DESIGNED FOR USE WITH FRONT FENDER
DETAIL of RSD STAMPED BRASS LOGO BADGE
TRACKER NARROWGLIDE FRONT FORK BRACE
76
PRODUCT DESCRIPTION
BLACK POWDERCOAT
1988-11 XL, 1988-05 FXR/FXD
0208-2034-BP
CHROME 0208-2034-CH
WIDEGLIDE FORK BRACE
CHROME
When the front fender is removed from the stock forks it may look good but you end up with a “flexy flyer” that twists and sways more than a drunken sailor. We found this out when we started putting wide, 21˝ wheels on our Softails. Bring the performance back by keeping your front wheel going in the direction you point it. • REPLACES FRONT FENDER ON SOFTAILS OR WIDEGLIDE FORKS • LASER CUT FROM 3/16˝ 1018 STEEL • PRACTICALLY ELIMINATES FRONT FORK FLEX • FOR USE WITH UP TO A 21˝X 3.5˝ FRONT WHEEL/TIRE • STAMPED BRASS RSD LOGO BADGE CHROME HARDWARE INCLUDED
*BLACK POWDER-COAT IS GLOSS FINISH *NOT DESIGNED FOR USE WITH FRONT FENDER
BLACK POWDER COAT
DETAIL of RSD STAMPED BRASS LOGO BADGE
tracker WIDEGLIDE front fork brace PRODUCT DESCRIPTION
BLACK POWDERCOAT
FITS MOST HD WIDEGLIDE APPS EXCEPT FXSTD/FXCW/C
0208-2029-BP
CHROME 0208-2029-CH
77
HEADLIGHT BRACKET Used for Springer front-end applications, this handcrafted, polished stainless steel bracket relocates your headlight to the bottom of the shock. Shine more light on the road and give your Springer a streamlined look with added adjustability MOUNTS TO STOCK OR CUSTOM APPLICATIONS • POLISHED STAINLESS STEEL • WIDE RANGE OF ADJUSTABILITY • CHROME MOUNTING HARDWARE INCLUDED •
nostalgia HEADLIGHT RELOCATION BRACKET PRODUCT DESCRIPTION
78
ALL HD SPRINGER MODELS & CUSTOM APPS W/ SPRINGER FRONT ENDS W/ SHOCK ONLY
POLISH 0207-2000
79
RSD CAFE SPORTSTER
80
Keep it simple, keep it clean. These are words we live by and this is what our café sportster is about. Chopping off the extra crap and building something that works better than the stock machine. We raised this bike up to give us ample ground clearance for ripping around the canyons and embarrassing sportbike riders. Nothing hurts a Ducati purists soul more than getting passed by a sportster. The best thing about the Café Sporty is it’s affordable to build and the possible combinations for customizing are endless. PARTS WISH LIST - RSD CAFE SPORTSTER PRODUCT DESCRIPTION
PART # BUY
GEAR DRIVE GAS CAP (BLACK OPS)
0210-2006-SMB
FORK BRACE - NARROWGLIDE
0208-2034-BP
VENTURI AIR CLEANER - BOSS (BLACK OPS) NOSTALGIA IGNITION COVER CAFÉ FRONT MASTER CYLINDER CAP
0206-2041-SMB 0177-2012-B 0208-2038-SMB
39mm CLIP-ONS
0208-2039-B
TRACKER GRIPS
0063-2019-BM
GAUGE & HEADLIGHT RELOCATION MOUNT
0207-2001-B
COIL IGNITION RELOCATOR
0205-2009
81
BLOG-IT PROGRAM show us your bike
Nothing gets us more stoked than seeing bikes from all over the world that our customers are building in their own garages and shops. From Sportbikes to Sportsters, Cafe Racers to Baggers - it’s obvious that the spirit of customizing and creation is alive and well. we are proud and want you to show the world what you are doing! Get out that camera, take some stylish snap shots or video and post it up on Facebook, You Tube or on your favorite forum or blog. Forward us the post at www.rolandsands. com or info@rolandsands.com and we will send you a limited edition RSD t-shirt, hat, dvd or piece of inspiration to show you our appreciation for being a customer and a customizer. Keep it clean...
CHECK US OUT Do you have an insatiable appetite for custom bikes? The Roland Sands Design website is the perfect choice for the bike enthusiast looking for the cutting edge of bike customization. Follow all the RSD bike builds, new products, charity work and the life and times of Roland and the crew at www.rolandsands.com.
become a fan on facebook Check out the latest videos and share pics of your own “pride and joy” customized with RSD products. Put your own two cents in and comment on posts while also being on the inside track to receive exclusive free RSD swag. Get up to speed with our blog posts and ride off into the 21st century at www.facebook. com/RolandSandsD…become a fan of RSD on facebook today.
CHECK OUT OUR VIDEOS Catch a glimpse of all things Roland Sands Designs on our own Youtube channel at www.youtube.com/user/RolandSandsDesign. From gnarly stunts to award winning bike builds, if it’s been in front of a camera, you’ll find it here. Subscribe now and get in on the action.
82
PRODUCT CARE
RECOMMENDED PRODUCT MAINTENANCE
Contrast Cut Wheels:
Chrome Accessories:
Clean and Care of Black Anodized Finish: Wash with mild soap and water, no detergents or harsh chemical cleaners that can destroy the black anodized finish. You may use a nonabrasive wax on the black anodized portion of the product to protect it. Never use a harsh or abrasive wax as it will remove the black anodized finish.
Wash with mild soap and water, use a healthy coat of Carnuba wax, apply often with a soft cloth.
Black Anodized Accessories: Wash with mild soap and water, no detergents or harsh chemical cleaners that can destroy the black anodized finish. You may use a non-abrasive wax with UV protectant on the black anodized portion of the product to protect it. Never use a harsh or abrasive wax as it will remove the black anodized finish. Avoid exposure to UV rays whenever possible.
RECOMMENDED WHEEL MAINTENANCE Chrome Wheels:
CLEANING: Clean your wheels often, this will remove contaminates that eat your chrome and will extend the life of the chrome many years. Never use chemical cleaners, instead use mild soap and water and a soft cloth to clean the wheels. WAXING: High speed and long distances on dirty roads can have the same effect as sandblasting your wheels and a good coat of wax is their only protection. We recommend Carnuba type wax applied often with a soft cloth after each ride.
CLEAN AND CARE OF MILLED AREA ON STANDARD CONTRAST CUT PRODUCTS: Wash with mild soap and water, no detergents or harsh chemical cleaners. To remove stains on the milled area you may use the following methods depending upon the condition of the wheel. A mild MAG polish will remove mild stains from the milled area, but will make the milled area shiny as it contains some abrasives. CAUTION: Take extreme care not to use this on the black ano surface of any product as it will remove the black finish. Scotch bright can be used to remove more severe stains on the milled area. CAUTION: Measures should be taken up to and including masking to ensure that the black ano surface of any product is not damaged.
Black-Ops Finish: Wash with mild soap and water. No detergents
or harsh chemical cleaners should be used, as they can destroy the anodized finish. Wax and/ or cleaners containing wax are not recommended as they may leave an uneven finish on the matte black surface. Detail spray or WD40 also work well for “dry cleaning� or wipe-down. Due to semi-rough surface of the Black Ops finish, we recommend using a micro-fiber or other lint free type of cloth so as not leave behind any remnants of the cloth.
83
WARRANTY INFO
PURCHASE INFO
Roland Sands Design Product Is Manufactured By Performance Machine, Inc. Thus All International And Custom Orders Are Subject To The Warranty And Rules Of Performance Machine, Inc. As Outlined Below. WARRANTY COVERAGE
If your Performance Machine, Inc. product is defective in material or workmanship and you return it to us within one year from the date of purchase, we will replace it or, at our option, repair it at no charge to you. If we repair the defective part, we may use reconditioned replacement parts or materials. If we replace it, we may replace it with a reconditioned one of the same design.
CHROME WARRANTY
Two Year Unconditional Warranty The chrome finish on your Performance Machine product is of the highest quality, but to ensure its longevity it must be maintained properly. Salt, sand, and humidity are bad for chrome. If you ride the motorcycle in these conditions and do not clean and dry the chrome parts, the life of the chrome will be shortened. Do not use any abrasive cleaners or waxes. Performance Machine reserves the right to determine if the product has been maintained properly and has not been abused. If your Performance Machine, Inc. chrome product has been maintained properly and has not been abused, you may return it to Performance Machine within two years of the invoice date and if upon inspection it is found to be defective, we will replace it, or at our option repair it.
BLACK ANODIZED WARRANTY
Two Year Unconditional Warranty - The black anodize finish on your Performance Machine product is of the highest quality, but to ensure its longevity it must be maintained properly. Exposure to UV rays is bad for black anodize. Do not use any abrasive cleaners or waxes. Performance Machine reserves the right to determine if the product has been maintained properly and has not been abused. If your Performance Machine, Inc. black anodize product has been maintained properly and has not been abused, you may return in to Performance Machine within two years of the invoice date and if upon inspection it is found to be defective, we will replace it, or at our option repair it.
HOW TO OBTAIN WARRANTY SERVICE
Contact Performance Machine at (714) 523-3000 to obtain authorization to return the part. Send parts to us at the address below, together with a letter describing the problem. You must prepay all shipping costs. Performance Machine, Inc., Warranty Service CA 90623 U.S.A.
6892 Marlin Circle, La Palma,
WARRANTY EXCLUSIONS
This warranty does not cover any damage to the product caused by accident, misuse, failure to follow installation and operation instructions, misapplication, alteration or attempted unauthorized repair service by anyone other than us. This warranty does not cover wheels used on the street or highway that are designated in our catalog for racing purposes only. In addition, due to the unusual stresses placed on all parts used on the race track, Performance Machine, Inc. will warranty at their discretion any parts used for racing purposes.
LIMITATIONS OF WARRANTY
84
Repair or replacement of the product by us is your sole and exclusive remedy. Implied warranties, including those of fitness for a particular purpose and merchantability, are limited in duration to the one (1) year term of this express warranty. We will not be responsible for incidental or consequential damages. There are no express warranties which extend beyond those set forth in this document.
STATE LAW RIGHTS
Some states do not allow the exclusion or the limitation of incidental or consequential damages or a limitation of the duration of implied warranties so some of the above limitations or exclusions may not apply to you. This warranty gives you specific legal rights and you may also have other rights which may vary from state to state.
TERMS
Deposit required on all retail orders. Deposit must be money order or certified check; personal checks will be held for 2 weeks to clear. Orders must be paid in full before shipment. There will be no dealer discounts except to legitimate motorcycle businesses.
CREDIT CARD PURCHASES
Performance Machine accepts MasterCard and VISA as a deposit or for payment in full on orders in the United States. Credit card orders can only be shipped to the verifiable billing name and address of the card. Balance of order must be paid in full before shipment. We do not accept Credit Card payments for any orders shipped out of the United States (except Canada and Puerto Rico).
SHIPPING
All orders within the continental U.S. will be shipped Ground unless otherwise specified. All orders shipped FOB PERFORMANCE MACHINE, INC.
FOREIGN AND APO SHIPMENTS
Performance Machine recommends that you contact a local dealer for parts; Contact Performance Machine for a list of dealers in your country. All foreign shipments must be paid in full including freight. Performance Machine does not accept Credit Cards for payment of foreign orders. Contact Performance Machine for acceptable method of payment. PM will not be responsible for customs duties or charges when importing parts into other countries. All APO shipments must be paid in full including shipping via U.S. Mail. For APO shipments only - write or call Performance Machine, Inc. for estimate of shipping costs.
RETURNS
No returns will be accepted without prior authorization by calling or writing Performance Machine, Inc. to request an RMA number. Parts will only be considered for return if the request is made within 30 days from the date of invoice. A handling fee will be charged to restock parts unless otherwise specified. Performance Machine, Inc. reserves the right to refuse to issue an RMA at our discretion. PLEASE NOTE: ALL PARTS RETURNED MUST BE PACKAGED CORRECTLY; THE CUSTOMER WILL BE RESPONSIBLE FOR MERCHANDISE DAMAGED IN SHIPPING DUE TO INADEQUATE PACKAGING. PERFORMANCE MACHINE WILL NOT BE RESPONSIBLE FOR RETURN FREIGHT ON OVERSEAS ORDERS.
PRICES
ALL PRICES ARE SUBJECT TO CHANGE WITHOUT NOTICE.
DELIVERY TIME
PERFORMANCE MACHINE, INC. is the manufacturer of the majority of our products. PERFORMANCE MACHINE, INC. can give an estimated shipping date, however we cannot guarantee exact delivery for any product.
Contact one of our International Distributers:
Australia ROLLIES SPEED SHOP www.rollies.com.au Canada PARTS CANADA Tel: 403 250 7560 www.partscanada.com Europe MAG Europe Tel: 0044 (1)61 335 99 55 www.mageurope.net Germany PARTS EUROPE Tel: 0049 (0) 6501/96 95 2003 www.partseurope.eu Germany W&W Cycles AG Tel: 0049 (0)931 2506115 www.wwag.com
Netherlands Zodiac International B.V. www.zodiac.nl New Zealand Performance Cycle Wholesale Tel: 0064 (0)9 308 1625 Tel: 0031 (0)297 28 8621 www.performancecycle.co.nz Scandinavia MotoSpeed Tel: 0046 (0)21351925 www.motospeed.se Switzerland Parts World Tel: 0041 (0)32 677 2421 United Kingdom Shaw Harley Davidson Tel: 01825 872003 www.shawharley-davidson.co.uk
Japan Suzuki and Associates 81 566 464 700 www.customworld.jp If you live in the United States please place your RSD order with your local Drag Specialties Dealer. Visit www.dragspecialties.com to find your V-Twin dealer. If located elsewhere please contact the sales team at Performance Machine. Email: sales@performancemachine.com Phone: 1-800-479-4037
APPAREL We have finally picked our creative minds out of the grease, steel and aluminum chips long enough to get some T-shirts designed. We hope you enjoy them. They are high quality pieces with some huge prints so you can represent RSD properly.
85
MEN’S
BLACK BLOCK
86
BLACK/GREY BADGE
WOMEN’S
RED BLOCK
WING
RSD LOGO
BLACK/GREY EAGLE
NAVY
RIBBED
PRODUCT DESCRIPTION
SIZE
MENS BLACK BLOCK LOGO T-SHIRT
MED
0800-23C0-0001
PART #
MENS BLACK BLOCK LOGO T-SHIRT
LG
0800-24C0-0001
MENS BLACK BLOCK LOGO T-SHIRT
XL
0800-25C0-0001
MENS BLACK BLOCK LOGO T-SHIRT
XXL
0800-26C0-0001
MENS RED BLOCK LOGO T-SHIRT
MED
0800-23C0-9001
MENS RED BLOCK LOGO T-SHIRT
LG
0800-24C0-9001
MENS RED BLOCK LOGO T-SHIRT
XL
0800-25C0-9001
MENS RED BLOCK LOGO T-SHIRT
XXL
0800-26C0-9001
MENS BLACK LOGO T-SHIRT
MED
0800-23C0-0002
MENS BLACK LOGO T-SHIRT
LG
0800-24C0-0002
MENS BLACK LOGO T-SHIRT
XL
0800-25C0-0002
MENS BLACK LOGO T-SHIRT
XXL
0800-26C0-2002
MENS WHITE WING T-SHIRT
MED
0800-23C1-0003
MENS WHITE WING T-SHIRT
LG
0800-24C1-0003
MENS WHITE WING T-SHIRT
XL
0800-25C1-0003
MENS WHITE WING T-SHIRT MENS BLACK BADGE T-SHIRT MENS BLACK BADGE T-SHIRT
XXL
0800-26C1-0003
MED
0800-23C0-0005
LG
0800-24C0-0005
MENS BLACK BADGE T-SHIRT
XL
0800-25C0-0005
MENS BLACK BADGE T-SHIRT
PRODUCT DESCRIPTION
SIZE
MENS GREY EAGLE T-SHIRT
MED
0800-23C0-8004
PART #
MENS GREY EAGLE T-SHIRT
LG
0800-24C0-8004
MENS GREY EAGLE T-SHIRT
XL
0800-25C0-8004
MENS GREY EAGLE T-SHIRT
XXL
0800-26C0-8004
XXL
0800-26C0-0005
PRODUCT DESCRIPTION
MENS GREY BADGE LOGO T-SHIRT
MED
0800-23C0-8005
WOMENS NAVY BLUE T-SHIRT
SM
0801-22C1-1001
MENS GREY BADGE LOGO T-SHIRT
LG
0800-24C0-8005
WOMENS NAVY BLUE T-SHIRT
MED
0801-23C1-1001
MENS GREY BADGE LOGO T-SHIRT
XL
0800-25C0-8005
WOMENS NAVY BLUE T-SHIRT
LG
0801-24C1-1001
MENS GREY BADGE LOGO T-SHIRT
XXL
0800-26C0-8005
WOMENS NAVY BLUE T-SHIRT
XL
0801-25C1-1001
MENS BLACK EAGLE T-SHIRT
MED
0800-23C0-0004
WOMENS BLACK RIBBED TANK TOP
SM
0801-32C0-0001
MENS BLACK EAGLE T-SHIRT
LG
0800-24C0-0004
WOMENS BLACK RIBBED TANK TOP
MED
0801-33C0-0001
MENS BLACK EAGLE T-SHIRT
XL
0800-25C0-0004
WOMENS BLACK RIBBED TANK TOP
LG
0801-34C0-0001
MENS BLACK EAGLE T-SHIRT
XXL
0800-26C0-0004
WOMENS BLACK RIBBED TANK TOP
XL
0801-35C0-0001
SIZE
PART #
87
WWW.ROLANDSANDS.COM RSD TOLL FREE # (866) 773-6648