Magnetic Automation Pty Ltd
Spare Parts Catalogue
Catherine Kay 30/1/14 Rev 1.7
Page | 1
INDEX Section 1
Traffic Barriers ............................................................. Page 3 MHTM Boom Gates .................................................... Page 4 MBE 30/35/50 Boom Gates ....................................Page 14 MIB 30/40 Boom Gates ...........................................Page 18 MTS Boom Gates ......................................................Page 21 MSV/MTS (Older Type) Boom Gates .....................Page 23 Articulated Boom Arm Spare Parts .......................Page 26 Boom Lock Spare Parts ...........................................Page 27
Section 2
Gates ...................................................................... Page 28 IGD Swing Gate .......................................................Page 29 GTA Swing Gate (discontinued) ...........................Page 30 MCG Slide Gate .......................................................Page 31 MCG/MSL Track Gate Rollers & Floor Track ........Page 34 MSL 20P-U & MSL 20 Motor c/w Controller ..........Page 35 STG Slide Gate ..........................................................Page 38 Heras ..........................................................................Page 41
Section 3
Pedestrian Barriers ................................................. Page 58 MPT Turnstiles .............................................................Page 59
Section 4
Accessories and Photocells ................................. Page 61 Photocells & Accessories ........................................Page 62
Page | 2
Section 1 Traffic Barriers
Page | 3
1.1 No.
MHTM PARKING and ACCESS Boomgates Part No.
Description
MHTM A10315811
Boom flange set Boom flange set (breakaway)
MHTM A20035145
Flange shaft
MSB SBH01
Short boom section for VarioBoom Includes short boom, covers, internal brackets, end cap and fasteners
MHTM A20475114
Upper spring crossbar
MHTM A20475115
Lower spring crossbar
MHTM A20345349
Spring holding bracket
MHTM A20415077
Counter bearing flange tube
MHTM A20565118
Connecting lever (secondary arm)
Page | 4
No.
Part No.
Description
MHTM A20565116
Motor swing arm (primary arm), MC14, 90deg. (Parking, Parking Pro, Toll Pro)
MHTM A20565128
Motor swing arm (primary arm), MC12, 88deg. (Access-L, Access Pro-L, Access Pro-H)
MSB A20340155
Cover bracket
MHTM A20345348
Lock bracket for housing lid
MHTM A20345347
Fastening bracket for housing lid
MHTM A20075010
Sliding block, M8
MHTM A20075011
Sliding block, M10
MHTM A20075014
Sliding block, M6 20x6x78
MHTM A20185225
Magnetic logo silver disc
Page | 5
No.
Part No.
Description
MHTM A20345358
Cable fastening clip
MHTM A20435637
Channel clamp bar U-profile 40x20x275
MHTM A20365008
Tension spring, weak
MHTM A20365009
Tension spring, strong (yellow dot)
MHTM SM01
Service Module Must be programmed with the latest firmware/software
MGC-A-100-0001
Controller MGC (Parking, Acess-L)
MGC-PRO-A-1000001
Controller MGC Pro
MGC-A-100-0000
Controller MGC without detector module
(Parking Pro, Acess-L Pro)
(Toll Pro)
Page | 6
No.
Part No.
Description
MHP-144A-E101-G
Planetary gear drive NGT 40Nm 2000rpm (Parking)
MHP-144A-E100-G
Planetary gear drive ESL 45Nm 2000rpm (Parking Pro, Toll Pro)
MHP-144A-E103-G
Planetary gear drive NGT 40Nm 1000rpm (Access-L)
MHP-145A-E100-G
Planetary gear drive ESL 65Nm 1000rpm (Access Pro-L, Access Pro-H)
MHTM A20435694
Back door panel, dark grey (Parking, Parking Pro, Access-L, Access Pro-L)
MHTM A20435696
Back door panel, tall, dark grey (Access Pro-H, Toll Pro)
MHTM A20435707
Front door panel, dark grey with screen print name (Parking, Parking Pro, Access-L, Access Pro-L) Page | 7
No.
Part No.
Description
MHTM A20435708
Front door panel, tall, dark grey with screen print name (Access Pro-H, Toll Pro)
MHTM A21085009
Side Panel, left, RAL2000 Orange (Parking, Parking Pro, Access-L, Access Pro-L)
MHTM A21085006
Side Panel, tall, left, RAL2000 Orange (Access Pro-H)
MHTM A21085010
Side Panel, right, RAL2000 Orange (Parking, Parking Pro, Access-L, Access Pro-L)
MHTM A20695057
Housing Top lid, aluminium, RAL 2000 Orange
MHTM MHS2K01
Mini hand held transmitter, 2 channel
MHTM A31346051
Power supply Micro Drive
(3084 5046)
24V/10A+1A without battery back up
MHTM FM02
Remote Reciever, 433 MHz, plug-in
Page | 8
No.
Part No.
Description
MHTM DM02
2 channel loop detector, plug-in
MHTM EM01
Ethernet card, plug-in
MHTM RSM01
RS485 card, plug-in
MHTM GPO
GPO isolator kit
MHTM GTS01
Key lock and key 018
MHTM MP01
Gear tray for additional devices
MHTM LS01
PE Beams, Transmit and Receiver MHTM boomgates can only use these PE beams
Page | 9
No.
Part No.
Description
MHTM APLS01
PE Beam mounting post
MSB PS01
Pendulum support, including mounting brackets
MSB A20405185
Pendulum pivot bracket
MAP AP01
Boom catch post
MSB A20510040
Articulated boom hinge
MSB A20340154
Atriculated boom mounting bracket
MSB A20590069
Articulated boom connection bracket
MSB A20570043
Atriculated boom shackle connection bracket
Page | 10
No.
Part No.
Description
MSB A31346035
Articulated boom rod arm boom extrusion
MHTM A10435389
Boom lock 24V solenoid (locking mechanism only)
Straight Vario Boom Arm
VARIOBOOM-N025
VarioBoom, length 2.5 m
VARIOBOOM-N030
VarioBoom, length 3.0 m
VARIOBOOM-N035
VarioBoom, length 3.5 m
Page | 11
No.
Part No.
Description
VARIOBOOM-N040
VarioBoom, length 4.0 m
VARIOBOOM-N045
VarioBoom, length 4.5 m
VARIOBOOM-N050
VarioBoom, length 5.0 m
VARIOBOOM-N055
VarioBoom, length 5.5 m
Page | 12
No.
Part No.
Description
VARIOBOOM-N060
VarioBoom, length 6.0 m
VARIOBOOM-SHORT
Boom short 470mm powdercoated basic Articulated Boom Arms
VARIOBOOM-K025
VarioBoom, articulated, length 2.5 m
VARIOBOOM-K030
VarioBoom, articulated, length 3.0 m
VARIOBOOM-K035
VarioBoom, articulated, length 3.5 m
VARIOBOOM-K040
VarioBoom, articulated, length 4.0 m
VARIOBOOM-K045
VarioBoom, articulated, length 4.5m
Page | 13
1.2 MBE 30 & MBE 35/50 Traffic Barrier
No.
Part No.
Description
1
MBE A35380700
Microswitch
2
MBE A32280010
End Stop Rubber
3
MBE A11320704
Controller 230V MBE -30 Traffic Barrier (No Capacitor included) Two external capacitors are required with MBE 30 controller as compared with only one capacitor for MBE 35/50 controller
4
MBE A11320701
Controller 230V
(1013 5033)
MBE 35 /50 Traffic Barrier (Comes with 2 uf external capacitors) Old controllers have in-built capacitor
5
MBE A20940400
End Stop Bracket
6
MC 43 C320
Motor MBE 30 Traffic Barrier
Page | 14
No. 7
Part No.
Description
MC 63 C170
Motor MBE 35 Traffic Barrier
8
MC 63 C175
Motor MBE 50 Traffic Barrier
9
LOC A35400019
Door Lock with Key 018
10
LOC A35400020
Lid Lock with Key 018
11
MSB A38390005
Insert Sleeve, Aluminium
12
BLT A30901880
Boom Arm Mounting Bolt Hex HD M8 x 80 mm
13
MSB A17400005
Pendulum Support For MSB 5 Boom Arm With Mounting Pivot Bracket
14
MSB A20405185
Pendulum Pivot Bracket
15
MSB A32230008
End Cap MSB 5N Boom Arms
16
MID 1E-800
Single Channel Loop Detector (VEK M1H)
Page | 15
No.
Part No.
Description
17
MID 2E-800
Dual Channel Loop Detector (VEK M2H)
18
MBE A38360701
Main Shaft & Flange
19
MBE A38500700
Spring Light Duty MBE 30 / 35 Traffic Barrier
20
MBE A38500701
Spring Heavy Duty MBE 50 Traffic Barrier (Yellow dot on one end)
21
MBE A13010701
MBE Housing, c/w Housing, Door, Lid & 2 Locks Can be used for MBE 30/35/50 Traffic Barriers
22
MBE A23500701
MBE Housing Only Can be used for MBE 30/35/50 Traffic Barriers
23
MBE A31200702
Motor Drive Arm
24
LBL A25250003
Label Boom Arm (PVC)
25
LBL A25250004
Magnetic Aluminium Label with 1300 364 864 Number
26
MSB A36650008
Nylon Nut, M8
Page | 16
No.
Part No.
Description Straight Octagonal Boom Arm - 100 x 55
27
MSB 5N-030
3.0 Metre Boom Arm
Total Length 3250 mm
28
MSB 5N-035
3.5 Metre Boom Arm
Total Length 3750 mm
29
MSB 5N-040
4.0 Metre Boom Arm
Total Length 4250 mm
30
MSB 5N-045
4.5 Metre Boom Arm
Total Length 4750 mm
31
MSB 5N-050
5.0 Metre Boom Arm
Total Length 5250 mm
32
MSB 5N-055
5.5 Metre Boom Arm
Total Length 5750 mm
33
MSB 5N-060
6.0 Metre Boom Arm
Total Length 6250 mm
Articulated Boom Arms 34
MSB 5K-030
3.0 Metre Artic Boom Arm
Total Length 3250 mm
35
MSB 5K-035
3.5 Metre Artic Boom Arm
Total Length 3750 mm
36
MSB 5K-040
4.0 Metre Artic Boom Arm
Total Length 4250 mm
37
MSB 5K-045
4.5 Metre Artic Boom Arm
Total Length 4750 mm
Heavy Duty Octagonal Boom Arm 41
MSB 6N-060
6.0 Metre Boom Arm
Total Length 6200 mm
42
MSB 6N-080
8.0 Metre Boom Arm
Total Length 8200 mm
Page | 17
1.3 MIB 30 /40 Traffic Barriers
No.
Part No.
1
MIB A23500040
Description MIB Barrier Housing & Door RAL 2000
2
MIB A25600040
MIB Barrier Lid RAL 2000
3
MLC 10-U100
MLC Controller
4
MC A32280001
End Stop Buffer
(MIB/MSV/MTS)
Page | 18
No.
Part No.
5
BDU30L-A100
Description BDU Unit MIB 30 Traffic Barrier
6
BDU40L-A100
BDU Unit MIB 40 Traffic Barrier
7
POT A37600008
Potentiometer Assembly
8
MIB A31200021
Lever Arm
9
MBE A38500700
Spring Light Duty MIB 30 Traffic Barrier
10
MBE A38500701
Spring Heavy Duty MIB 40 Traffic Barrier (Yellow dot on one end)
11
MIB A38365011
Boom Flange, Machined
12
MIB A10140029
Main Shaft
Page | 19
No.
Part No.
13
MIB A38365005
Description MIB Boom Flange Kit
NOTE: Boom arms & related accessories are the same as that of MBE Traffic Barriers
Page | 20
1.4 MTS Traffic Barrier
No.
Part No.
1
MUB 3A-418
Description
Photo
MUB Controller Old MTS Barriers may have MUB 3Aseries contollers & can be replaced with latest MUB 3A-418 Controller
2
MTS A38500006
Spring, MTS 6/8
3
MTS A35380006
Limit Switch
4
SAM 210-32
Motor MTS 6/8 Traffic Barrier
5
MTS A28400006
Insert Sleeve
6.
MTS A31110006
CAM Plastic, MTS 6
7
MTS A31200006
Shaft Drive Arm Casting
Page | 21
No.
Part No.
Description
Photo
8
MAP A 20940101
Boom Catch Bracket MSB 6 Boom Arm
9.
MAP A32280003
End Stop MAP 5/6 Catch
10.
MSB A32230003
End Cap 120 X 80 Hole
11
MSB A32230004
End Cap 110 X 70 Plain
12
MSB 6N-060
6.0 Metre MTS Boom Arm Total Length 6200mm
13
MSB 6X 2.2
MTS Boom Extention 2.2 Metres
Note :-
MTS boom arm longer than 6 metres will require additional parts & a complete bill of material can be found in Harmony.
For example:
8 metre boom arm having Part No. MSB 6N-080 includes all required parts to make a 8 metre boom arm.
Page | 22
1.5
MSV & MTS (Old Style) Traffic Barriers
No.
Part No.
Description
1
MUB 3A-418
MUB Controller
2
MC A32280001
End Stop Buffer
3
SAW A38500010
Photo
Spring MSV/MSE 3/MSE 5
4
SAW A38500013
Spring MSV 4/5 Traffic Barrier 4-5m boom
5
SAW A38500014
Spring Heavy Duty MSV 5 4-6m boom
6
MTS A38360002
Shaft MTS 4 / MTS Old
7
MTS A38500005
Spring MTS 4/5 MSV Old Rings on both Ends
8
MC 43 C360
Motor MSV 3 Traffic Barrier May need additional capacitor if replacing MCxxS Series motor to MCxxC motor Page | 23
No. 9
Part No. MC 83 C230
Description
Photo
Motor MSV 4 Traffic Barrier May need additional capacitor if replacing MCxxS Series motor to MCxxC motor
10 MC 83 C310
Motor MSV 5 Traffic Barrier May need additional capacitor if replacing MCxxS Series motor to MCxxC motor
11 SAW A31200021
Motor Drive Arm Casting
(2056 0043)
12 SAW A31310011
Con Rod
13 RDE A37930012
Rod End R/H (Nut will screw in clockwise)
14 RDE A37930013
Rod End L/H (Nut will screw in anti-clock wise)
15 SAW A31200020
Shaft Drive Arm Casting
16
Limit Switch (New Type)
MTS A35380006
Page | 24
No.
Part No.
17
MTS A36000004
Description
Photo
Microswitch MTS 4
Note :MSV and MTS (old style) housing is no longer available (discontinued model) Refer Motor Data Sheet for required capacitors with MCxxC Series Motors
Page | 25
1.6
Articulated Boom Arm Spare Parts – MIB/MBE/MTS/MSV
No.
Part No.
Description
1
RDE A37930012
Rod End R/H (Nut will screw in clockwise)
2
RDE A37930013
Rod End L/H (Nut will screw in anti-clock wise)
4
MSB A33580003
Hinge ZP
5
MSB A27400101
Pivot Bracket 12mm Threaded
6
MSB A25990101
Pivot bracket- Rein White
7
MSB A20940005
Hinge Bracket –Rein White
Note :-
Photo
Con Rod (Part Number MSB A1129001) is a tailor made part & its length varies site to site depending upon clearance height etc. on site.
Page | 26
1.7 Boom Lock Spare Parts
No.
Part No.
Description
1
MMV 1A-100
Boom Lock Controller
2
MAP A38440110
Solenoid Latch
3
MAP A35250002
Latch Receiver
4
MAP A33490115
Guide Latch Receiver MSB 5 Boom Arm
Photo
(Installed on Boom Arm) 5
MAP A33490116
Guide Latch Receiver MSB6 Boom Arm Rear of Guide Latch Receiver for MSB 6 is Flat
6
MAP A13800001
Lock Recepticle Kit includes one Latch Receiver
7
MAP A27550001
MAP Boom Support Stand (Catch Post Only) (Requires Lock Recepitable Kit to make complete Catch Post)
Page | 27
Section 2 Gates
Page | 28
2.1 IGD Swing Gate
No.
Part No.
Description
1
IGD A31110001
Limit Switch Assembly
2
IGD A39180002
Transformer / Power Supply
3
MCB-6
CB-6 Controller For Single & Dual Leaf Gate System
4
IGD S INV.75
Photo
Some minor changes are required to make CB-6 compatiable for use with Dual Leaf Swing Gate System. (Refer old removed controller for required changes) Frequency Inverter .75 kw For Swing & Slide Gates Requires programming.
Page | 29
2.2 GTA Swing Gate (Discontinued)
No. 1
Part No. GTA 210-33 XE
Description
Photo
Reconditioned Motor Shaft on both ends (Only reconditioned unit available)
2
GTA A36000031
Limit Switch
3
GTA A31110030
Plastic Cam
Page | 30
2.3 MCG Cantilever Slide
No.
Part No.
Description
1
STG A17910002
Nylon Guide Roller
2
MGS A33140314
Gear Rack - Lugs Up
3
MGS A33140324
Gear Rack - Lugs Down
4
MCG A17913001
Front Main Roller Assembly 3.0 - 6.0 Metre Gate for 89 mm wide Gate Leaf
5
MCG A17913002
Front Main Roller Assembly 6.0 - 9.0 Metre Gate for 100 mm wide Gate Leaf
6
STG A17910004
Rear Top Roller Assembly 3.0 - 6.0 Metre Gate for 89 mm wide runner
7
STG A17910003
Rear Top Roller Assembly 6.0 - 9.0 Meter Gate for 100 mm wide runner
8
STG A17910005
Rear Bottom Roller Assembly 3.0 - 9.0 Meter Gates
Photo
Page | 31
11
MCG A17913003
Guide Roller TOP 8 metre plus
15
PRX A37700020
Proximity Kit for MSL-MSM c/w 1 x Proximity Sensor 1 x Proximity Mounting Bracket 1 x Proximity Block-Large 3 x Proximity Block-Small
16
PRX A37700002
Proximity Sensor 30 mm Dia
17
STG A27800002
Proximity Block – Small
18
STG A27800001
Proximity Block – Large
19
PRX A37700021
Proximity Mounting Bracket
21
GAL A38200102
Rubber Mount Block
22
MSL 20P-U & MSL 210
MSL Motor /Gear Box with Controller
25
STG A20940015
Bracket Guide Roller - Large
26
STG A20940016
Bracket Guide Roller - Small
27
STG A20940014
Catch Post Bracket Adjustable
Parts Shown in S.No. 16, 17,18 & 19
Page | 32
28
STG A23200022
Black Delrin Guide Catch Post
29
FLT A35373300
Flashing Light
Page | 33
2.4 MCG/MSL Track Gate Rollers & Floor Track No.
Part No.
Description
1
HI 187.3
Standard Floor Track One Length = 3 metres long
2
MTG A21470033
Heavy Duty Floor Track, 20 mm Solid
3
RLC 1030 PCO
Roller 100 mm Dia
4.
RLC 1630 PSO
Roller 160 mm Dia with Grease Nipple
5
RLC 12270
Roller 120 mm Dia
Photo
Page | 34
2.5 MSL 20MC Slide Gate Motor/Controller
No.
Part No.
Description
1
MSL A15780003
Motor / Gearbox Assembly Complete with Shaft
2
MSL A15803255
Motor with Gearbox only
Photo
No Shaft or Output Flange included 3
KEY A34770807
M8 x 7.0 mm Key Steel
4
MSL A28201273
Shaft
5
MSL A28481275
Spacer
6
BRG A30706305
Bearing
7
CLP A31240025
Circlip, 25 mm External
8
MSL A32850048
Gear Box Output Flange
Page | 35
No. 9
Part No. PLC A37680214
Description
Photo
PLC (FX 1s-14MR-ES/UL 8 Inputs / 6 Outputs) (Must be programmed)
10 FVR FR –D720S-0 Frequency Inverter 0.75 kw c/w Filter (Must be programmed) Can be used to replace D520 Series Frequency Inverters 11 GAL A19015613
Rubber Buffer 25mm x 15mm
12 STG A35430003
Locking Bush, 25mm
13 MSL A23150004
Spur Gear (Locking Bush not included)
14 MSL A23150006
Spur Gear, M6 16 Tooth For use with Heras & MSL 20
15 ENC A32200006
Encoder
16 PRX A37700002
Proximity Sensor 30 mm Dia
Page | 36
17 MSL A20451273
Mounting Base – Compact L/H
18 TFR A39180013
Transformer 0.5 Amp OBSOLETE
19 MSL A20941273
Quick Release Roller (NEW TYPE) Release Handle Outside the Cover
20 MSL A20941275
Quick Release Roller (OLD TYPE) Release Handle Inside the Cover
21 TFR A39180007
240 – 24V, 15VA. 630mA – Toroidal
Page | 37
2.6 STG Slide Gate
No.
Part No.
Description
1
STG A17910002 3-7.9m
Nylon Guide Roller Top & Bottom
2
MCG A17913003 Gates 8m + built 2012 onwards..
Guide Roller 8 m + Top & Bottom
3
STG A20940015
Bracket Guide Roller - Large
4
STG A20940016
Bracket Guide Roller - Small
5
PRX A37700002
Proximity Sensor – 30 mm
6
STG A27800002
Proximity Block – Small
7
STG A27800001
Proximity Block – Large
8
STG A20940014
Catch Post Bracket Adjustable
9
STG A23200022
Black Delrin Guide, Catch Post
Photo
Page | 38
10
FLT A35373300
Flashing Light
11
GAL A38200102
Rubber Mount Block
12
STG A17910004
Rear Top Roller Assembly 3.0 - 6.0 Metre Gate for 89 mm wide runner
13
STG A17910003
Rear Top Roller Assembly 6.0 - 11 Metre Gate for 100 mm wide runner
14
STG A17910005
Rear Bottom Roller Assembly 3.0 - 11 Metre Gates
15
STG A17910001
Front Main Roller Assembly 3.0 - 11 Metre Gates
16
PLC A37680214
PLC (FX 1s-14MR-ES/UL 8 Inputs / 6 Outputs) (Must be programmed)
17
FVR FR –D720S-0 Frequency Inverter 0.75 kw c/w Filter (Must be programmed) Can be used to replace D520 series Frequency Inverters
18
RLY A37800152
Relay 240 VAC, 2 Pole – FAT
19
STG A15800215
Break Relay STG Motor -Internal
Page | 39
20
PSY PBB2C30MSNY
Power Supply OBSOLETE
21
BAT A30551222
Battery 12 V 2.2 Ah
22
KSW A34780002
Break Release Key Switch, 2 Position Stay Put Key can be removed in both positions
23
STG A15800201
SEW Motor L/H
Face Towards mounting, Motor Shaft will be L/H side
24
STG A15800202
SEW Motor R/H Face Towards mounting, Motor Shaft will be R/H side
25
STA 210-28 XE
Motor (Discontinued Model) (For Old STG Gates) Only Reconditioned Motor available Shaft on one end only
26
PSY A17600002
Power Supply, DC24, 3.75A.90W Standard
Page | 40
2.7 Heras Slide Gate
MHG 30 200
Heras Delta gate Opening Width in dm. Height of Gate in cm.
Wire set Length 9100 mm MHG A12739010
= Wire Set Length 13000 mm
Part Number
Description
Qty
drsetligdelta91 MHG A12739010
Wire set delta length 9100 mm MHG 30xxx to MHG 60xxx
1
Wire set delta length13000 mm MHG 70xxx to MHG 95xxx
1
Tension Wire Ø 4.5mm length 13000mm Tension Wire Ø 8mm length 13000mm Warning Label
1 2 1
Consists of
A B C
MHG A12739011 spdr8
Page | 41
Tensioning Set Delta 09
Part Number
Description
Qty
deltaspset09
Tensioning Set Delta 09
1
Clamp for wires Ă˜ 4,5 mm Spanner for tension wire Ă˜ 4,5 mm M10 Hex Nut Cage Nut type SMG.M10 Tension Wire T Bracket 09 Collet 8 mm 2 delig type 16 Anchoring Sleeve 24-16 Anchoring Sleeve 24-16 threaded Anchoring Sleeve Cover Cap M24 Allen Screw M10 x 40 mm Washer M10 Collet Holder Shock Buffer Bracket Shock buffer 30x36 M8 Self Drilling Aluminium Screw Nameplate Heras
2 1 1 4 2 6 2 4 4 4 1 1 2 2 4 1 1 1
Consists of
A B C D E F G H I J K L M N O P
klemo5 MHG A12739013 MHG A12739014 MHG A12739015 deltatstk09zwa verankspie824 verankbus24 verankbusm24 verankbusdopm24 schrck1040 MHG A12739043 spiehdr stnstbufdeltazwa stbuf3036kpdm8
Page | 42
Small Parts Set Upper Beam
Part Number
Description
Qty
kgbvnlafwsetmzw
Small Parts Set Upper Beam
1
Upper Beam End Cap Screwhook Cap Cover Cap For Hole Ă˜ 19mm Nut M8 Washer M8 Cap Internal 60 x 60
2 2 6 10 4 2 2
Consists of
A B C D E F G
MHG A12739054 MHG A12739021 Kaph8060imzw dopf19
MHG A12739055
Page | 43
Mounting Ramp Support Set
Part Number
Description
Qty
setbevoplstndelta
Mounting Ramp Support Set
1
Coach Bolt m10 x 110 M10 Hex Nut Washer m10 M10 Nut Cap Rubber Shock Buffer
4 4 4 4 1
Consists of
A B C D E
MHG A12739024 MHG A12739014 MHG A12739043 stbuf26
Page | 44
Running Wheel Mounting Kit
A C B
D
opvstwhdr
Packer
Part Number
Description
setwielstlbev2rmzw
Running Wheel Mounting Kit
1
Clamp for Gate Post 60 x 80 Screw Round Head M8x80 mm Washer M8 Packer 15x0,8 mm
4 8 8 4
Qty
Consists of
A B C D
MHG A12739022 schrck880 opvstwhdr
Page | 45
MHG A12738999 = Small Parts Set Coupling
A
C B
E
D
G F
Part Number
Description
Qty
MHG A12738999
Small Parts Set Coupling Delta
1
Top Rail Connecting bracket Hex Bolt M8 x 25 Washer M8 Threaded Rod M10 x 220 mm Upper Coupler for Delta Beam Lower Coupler for Delta Beam Hex Nut m10
1 4 4 1 1 1 2
Consists of
A B C D E F G
koppstrbvnlvspktl bzk825 s drstg10220 koppstdeltab koppstdeltao MHG A12739014
Page | 46
MHG A12739025 = Guide Wheel E
A
B
C
D
Part Number
Description
Qty
MHG A12739025
Guide Wheel
4
Axel Top Guide Wheel Half Hex Nut M8 Allen Screw M8 x 25mm Guide Wheel 60 x 22
1 2 2 2 1
Consists of
A B C D E
asw60 glwhdrmzw m8 schrck825 w60
Page | 47
MHG A12739026 = Double Holder Running Wheel B
F
C
G
D
E
A 3
2 Consists of
1 2 3 4
4
1
Axel 252R ( 2 Pieces ) Running Wheel 702R ( 1 Piece ) Running Wheel 902R ( 1 Piece ) Bearing 3205 2RS ( 2 Pieces )
New wheels are marked with yellow colour
Part Number
Description
Qty
MHG A12739026
Double Holder Running Wheel
2
Spacer 25x32x4 mm Hexagon Bolt M10x16mm Double Running Wheel Bracket Protection Cap Running Wheel Retaining Circlip Ă˜52 mm Washer M10 M8 Flange Nut
2 2 1 1 2 2 4
Consists of
A B C D E F G
aftstbus25324 bzk1016 dashdrloopw2r kapdloopw2rmzw seegrborg52 MHG A12739043 m8flens G
Page | 48
Gate End with Support Block
A
A
Part Number
Description
MHG A12739047 MHG A12739037
Gate End 2000mm Gate End 2500mm
Qty 1
Page | 49
Beam Set Delta
B D
C
A
Part Number
Description
lglvsp515emk(m) lglvsp620emk(m) lgvsp760emk(m) lgvsp850emk(m) lgvsp1030emk(m) lgvsp1150emk(m) lgvsp1240emk(m)
Beam Set Delta, with serrated strip
Qty 1
Note: Lower Beam Length can be: 3800, 4250, 5150, 5750 of 6200 mm Note: Upper Beam Length can be: 3800, 4250, 5150, 5750 of 6200 mm Note Tension wire length can be: 3720, 4170, 5070, 5670 of 6120 mm
Consists of
A B C D
liglvsp… ligrvsp… bvnlmrvsp… mk spdr45… MHG A12739032
Left Beam VSP Length …. mm Right Beam VSP Length …. mm Upper Beam VSP, with serrated strip Length …. mm Tension Wire Ø 4,5 mm Length …. mm Sealring
Page | 50
Guide Post with Footplate B
B
A
Part Number
Description
MHG A12739046 MHG A12739036
Guide Post 2000mm Guide Post 2500mm .
Qty 3
Page | 51
MHG A12739038 / 48 = Bar Ø26 Length 2500mm / 2000mm
A
A
Part Number
Description
MHG A12739038 MHG A12739048
Bar delta Ø 26 m89 Length 1900 mm Bar delta Ø 26 m89 Length 2400 mm
Qty
Page | 52
Small parts Set Catch Post
B
A
C
D
Part Number
Description
Qty
setbevinlstnzijglmzw
Small Parts Set Catch Post
1
Clamp gate post 60 x 80 Allen Screw M8x80mm M8 Hex Nut Washer M8
2 4 4 8
Consists of
A MHG A12739022 B schrck880 C D
Page | 53
Gate Assembly Kit (Footplate)
B
C
A
Part Number
Description
Qty
kgsetdeltaekv(m)
Gate Assembly Kit
1
Tensioning Set delta Small Parts Set Upper Beam Mounting Ramp Support Set Running Wheel Mounting Kit Small Parts Set Coupling Guide Wheel Double Holder Running Wheel Small Parts Set Catch Post Small Parts Set Top Wheel Support for End Style Nesting Bracket Delta End Plate 09
1 1 1 1 1 4 2 1 1 1 1 2
Consists of
A B C
deltaspset kgbvnlafwsetmzw setbevoplstndelta setwielstlbev2rmzw MHG A12738999 MHG A12739025 MHG A12739026 setbevinlstnzijglmzw kgsetwielinlelmzw MHG A12739058 inlstnzijglv(m) MHG A12739009
Page | 54
Small Parts Set Top Wheel
D C B A
F
E
Part Number
Description
Qty
kgsetwielinlelmzw
Small Parts Set Top Wheel
1
Wheel Holder Roller Washer M6 M6 Nyloc Nut Allen Head M6x40mm Bolt Self Drilling Steel Screws
1 1 2 1 1 2
Consists of
A B C D E F
zijglwashdrmzw zijglwiel75
schrck640 schrtorxzb5526
Page | 55
Mounting Kit
A C B
D
A B C D
Part Number
Description
setdrstm16190
Template Washer M16 M16 Hex Nut Threaded Rod M16x190 mm ( 20 Pieces )
Qty 1 24 24 1 1 1
MHG TH = Tooth Rack
A
Qty Tooth Rack MHG MHG MHG MHG MHG MHG MHG
A
30 = 11 Pieces 40 =13 Pieces 50 = 16 Pieces 60 = 18 Pieces 70 = 21 Pieces 85 = 24 Pieces 95 = 26 Pieces
Part Number
Description
MHG TH
Tooth Rack
Page | 56
MHG A12739039
Heras Installation Kit
A C
B
E
D Part Number
MHG A12739039
A B C D E
krik10 krikplbv krikploktl sprsl montstnv
Description
Qty
Heras Installation Kit
Bottle Jack 10 ton Jack Plate Top Jack Plate Sealring Key Mounting Bracket Delta Bars
1 1 1 1 6
Page | 57
Section 3 Pedestrian Barriers
Page | 58
Magnetic Automation Administrative Procedures Manual | Page 59
3.1 MPT – 13C Turnstile
No.
Part No.
Description
1
MSC 10-E100
Full Height Turnstile Controller only
2
MPT A19215013
Adapter Flange
3
MPT A19215052
Return Spring
4
MPT A33025006
Solenoid
5
MPT A19215015
Power Fail Kit
6
MPT A19215050
3 Arm Cam Assembly
7
MPT A19215051
Rubbers for Cam Assembly
8
LOC A35400003
Lock
Photo
Page | 59
Magnetic Automation Administrative Procedures Manual | Page 60
9
MPT A33260001
Grease Nipple
10
GAL A34800004
Key 32 x 8 x 7
11.
MPT A37700016
Proximity Kit for Solenoid Mechanism c/w 2 x Proximity Sensors 2 x Mounting Brackets
12
MPT A19215010
Solenoid Locking Device MPT13
13
MPT A19215009
Complete Turnstile mech, including beackets and proxy kit. No controller
14
STA 210-28 XE
Reconditioned Motor for Old Turnstile Shaft on one end only (Discontinued Model)
Page | 60
Magnetic Automation Administrative Procedures Manual | Page 61
Section 4 Accessories and Photocells
Page | 61
Magnetic Automation Administrative Procedures Manual | Page 62
4.1 Photocells & Accessories No.
Part No.
Description
1
BF
Photocell (NICE) OBSOLETE
2
PO
PO Bracket (NICE)
Photo
FOTO BKT has same mountings as that of PO OBSOLETE 3
FOTO
Photocell (Magnetic Motion) OBSOLETE
4
FOTO BKT
Mounting Bracket (Magnetic Motion) OBSOLETE
5
PHOTOBEAM
Photocell FAAC
6
PHOTO BKT
Mounting Bracket FAAC
7
MPE PL 80 A
Reflex Reflector
8
MPE A37320006
SICK PE Beam 10 Metre
9
MPE A37320015
Reflex PE Beam Switch 5.0 – 8.0 Metres (NSW)
Page | 62