STP Special Tube Plug
Solutions for on-site machining applications
The STP plug solves the safety concerns associated to the typical installation of a conical plug and / or expansion plug for the exclusion of tubes on exchangers. The STP plug, built in different sizes and materials, fits in few minutes into the tube of the exchanger’s bundle prior a superficial conic reaming followed by rolling to create threads. The Roll threading does not weaken the tube, but reinforces instead the boring. The STP plug gives immediate economical benefits, it is not invasive for the tubesheet; also no special tools are required to install it and for a safe commission of the exchanger.
Safety Improved!
The plug screwed gives a solid anchor on the tube preventing the accidental projection when under pressure. The plug can be easily and safely removed without any risk. Residual pressure on the tube excluded can be released by a slot provided on the threads, while the plug is still in place and risk of projection of the plug is avoided. No needs to use screen guards during the inspection of the tube sheet. Seal welding of the plug to prevent the projection is NOT required
Vetroresina Engineering Development S.r.l. - www.ved.it