Makita New Zealand Quick reference Catalogue 2021 by Makita New Zealand Ltd

REFERENCE CATALOGUE 2021

DGP180 18V LXT® Grease Gun

GET CONNECTEDmakita.co.nz Get Connected

Get Connected

NEW IN 2021

LIMITED WARRANTY

MAKITA POWERTOOLS AND ACCESSORIES Makita Power Tools & Accessories are manufactured to the highest quality standards and are thoroughly inspected and tested before leaving the factory. In addition to any statutory rights and remedies you may have, Makita warrants its products sold new in New Zealand via an Authorised Makita New Zealand Dealer against defective workmanship and faulty materials from the date of purchase by the end customer for the corresponding period set out in the Classifications ** Non-registered purchases, including those prior to 1st January 2020. *** The spare parts must also have been fitted by an Authorised Service Agent. **** Limited lifetime warranty does not cover wear and tear, misuse or abuse. 2

MORE REASON TO TRUST MAKITA®

Scan QR code to to find out more:

www.makita.co.nz/warranty/

CATEGORY

WARRANTY (EFFECTIVE 1st APRIL 2020)

All Cordless Skins Li-ion

5 YEARS (Registered within 30 days)* or 3 YEARS (Registered post 30 days or Non-registered)**

240V, Pneumatic, Gas, Laser

2 YEARS

Petrol powered products

2 YEARS

Batteries and Chargers Li-Ion

2 YEARS

Clothing, Accessory Consumables, Drill Chuck,

1 YEARS

Spare Parts***, Tape Measures Handtools * Limited to purchases that are registered online at makita.co.nz (MyMakita) within 30 days of invoice. This offer is extended to purchases made between 1st January 2020 and 31st March 2020, which must be registered by 30th April 2020 to qualify.

LIMITED LIFETIME**** ** Non-registered purchases, including those prior to 1st January 2020. *** The spare parts must also have been fitted by an Authorised Service Agent. **** Limited lifetime warranty does not cover wear and tear, misuse or abuse.

MAKITA SERVICE CENTRE / DISTRIBUTION CENTRE

FIND YOUR NEAREST MAKITA® FACTORY SERVICE CENTRE FAST REPAIR TIME

QUALITY SERVICE

• Fast repair turn around

AUCKLAND

46 Westpoint Drive, Hobsonville, Auckland 0618 (09) 479 8262

FREE • Repair estimates

CHRISTCHURCH

11/8 Islington Avenue Islington, Christchurch 8042 (03) 930 0500

• Factory trained repair technicians • Genuine Makita® replacement parts • Safety Certification Check performed on all electric power tools

WELLINGTON

Unit 6, 55 Percy Cameron Street, Avalon, Lower Hutt 5011 (04) 280 7050

MAKITA NEW ZEALAND HEAD OFFICE & AUCKLAND DISTRIBUTION CENTRE 46 Westpoint Drive, Hobsonville, Auckland 0618 0800 625 482

CHRISTCHURCH DISTRIBUTION CENTRE 11/8 Islington Avenue, Islington, Christchurch 8042 (03) 930 0500

4 |

For all other enquiries call 0800 625 482 (0800MAKITA)

Get Connected

18v LXT Lithium-Ion > COMBO

KITS

To register your tool warranty please login to your MyMakita account. If you have not set up your free MyMakita account yet then register now. go to www.makita.co.nz/mymakita/ MyMakita is a personal space to store all your tool info, including warranty details. We require you to register your tools to extend your warranty. You can also list other tools (optional) to keep all the information in a safe place.

Warranty registration is for tools purchased in New Zealand ONLY, please see your local Makita if trying to register tools from another country. Australian Visitors: Please visit the Makita Australia website http://www.makita.com.au/ for all your warranty and support enquiries

www.makita.co.nz

For all other enquiries call 0800 625 482 (0800MAKITA)

| 5

MAXIMUM POWER & RUN TIME

BL4040

DC40RA

BL4025

BL4020

BL1860B

BL1850B

BL1840B

130

110

130

110

4.0AH

2.5AH

2.0AH

min

6.0AH

min

5.0AH

min

4.0AH

min

BL1830B

3.0AH

min

FAST CHARGER

min

DC18RD

FAST CHARGER

DC18RC

min

FAST CHARGER

DC18SD

min

CHARGER

DC18SF

min

CHARGER

DC18RE

min

12/18 DUAL CHARGER

DC10SB FAST CHARGER

DC10WD FAST CHARGER

DC10WA FAST CHARGER

*1 Use with Interchangeable adapter ADP10 (optional accessory). * The value in parenthesis is the practical charging time (80% charge).

6 |

For all other enquiries call 0800 625 482 (0800MAKITA)

Get Connected

18v LXT® Lithium-Ion > COMBO

KITS

CHARGERS THAT WORK AS FAST AS YOU DO

BL1815N

1.5AH

BL1460A

6.0AH

BL1430B

3.0AH

BL1041B

BL1021B

2.0AH

1.5AH

4.0AH

BL1016

BL1013

1.3AH

BL0715

7.2-1.5

15 min

130

60 min

130

min

www.makita.co.nz

min

For all other enquiries call 0800 625 482 (0800MAKITA)

min

| 7

INDEX OF PRODUCTS POWER TOOLS

3708F

COMBO KITS

18-21

18V LXT

23-43

4131

12V MAX

44-47

4100NH2

Drilling / Angle Drills / Impact Driver / Impact Wrench Hammers & Demolition Grinding Sawing Cutting Planers / Trimmers / Routers Sanders / Polishers

23-25 49 31-32 27 30-31 62 57

Dust Extraction

Blowers & Heat Guns

Lasers / Measuring

Commercial Cleaning

MT SERIES

Outdoor Power Equipment

73-74 38

Petrol Chainsaws | 2-4 Stroke

71-72

Petrol Brushcutters / Powerhead

69-70

Electric Hedge Trimmers Petrol Blower

72 70

Petrol Hedge Trimmers

Water Blasters

Tool belts/ Tool Bags / Macpak

75-76

ImpactX™, Nemesis II

78-83

Diamond Blade

Diamond Wheels

Efficut

84-87

Hand Tool Series

90-92

MODEL NO.

PAGE

2 2704N

2012NB

8 |

3709

3601B

A ADP05 / ADP06

AF506

AF601

4101RH

AN611

4107RH

AF635

4114S

AT638A

4351FCT

4329K

BO3710

4350FCT

BO4555K

4351FCT

BO4565K

BO4900V

5 5104

BO5030

5007MGK

BO5041K

5008MGJ

BO6030

5057KB

BO6050J

5902BJ

BHX2500

6300-4

CA5000XJ

6408

CC301D

6411

CL106FD

6413

CF100D / CF101D

6807

CG100DZX

6843

CL121D

6846

CLX205SAJ

6906

CP100D

CV102D

7 7104L

D DA3010F

9031

DA332D / DA333D

9032

DA6301

9046

DBS180 NEW

9401

DBN500 / DBN600

9403

DBO180

9404

DCC501 NEW

9237CB

DCF102

9556NB

DCF203 / DCF300

9557NB

DCG180

9565CV

DCE090

9565P

DCO181 NEW

9565PC

DCL184 NEW

9924DB

DCW180 NEW

For all other enquiries call 0800 625 482 (0800MAKITA)

Get Connected

INDEX OF PRODUCTS

18v LXT® Lithium-Ion > COMBO

KITS

DCJ201Z

DGA900

DML815

DCL281FZWX

DGA701 / DGA901

DML803

DCL280FZB

DGD800 / DGD801

DML805

DCL181FZWX / DCL180

DGP180 NEW

DML807 / DML808

DCM501

DHP458

DML809 / DML811

DCO180

DHP485

DML810

DCS4630

DHP481

DML812

DCS500

DHP482

DMP180

DCS552

DHP483

DMR113

DCS553

DHP484

DMR108

DCS9010/74

DHR165

DMR200

DCU180ZF

DHR171

DP2010

DCU180ZB

DHR182

DP4000K / DP4002K

DCV200Z

DHR202

DPP200

DDA350

DHR242

DP4010K

DDA460

DHR280 / DHR282 / DHR283

DPB180 / DPB182

DDF083

DHK180

DPB183 / DPB184

DDF458

DHR400

DPJ180

DDF485

DHS660

DPO600

DDF481

DHS680

DPT353

DDF482

DHS661 / DHS901

DPV300 NEW

DDF483 / DDF484

DHW080 NEW

DRC200

DDG460 NEW

DHS781 / DHS780 / DHS710

DRS780

DF001DW

DJN161

DRT50

DF031D

DJR183

DS4012

DF032D

DJR186

DSC102

DF331D

DJR187

DSC121

DF333D / DF332D

DJR188

DSC163

DFJ201 / DFJ206

DJR360

DSC191

DFJ214 / DFJ214O / DFJ304

DJS130 / DJS161

DSC251

DFN350

DJS131 / DJS200 / DJS800

DSD180

DFR450

DJV180

DSL800

DFS250

DJV181

DSP600

DFS251

DJV182

DSP601

DFS452 / DFS452ZX2

DKP180 / DKP181

DSS501

DGA452

DLM462 / DLM531 / DLM532 / DLM533

DSS611

DGA504

DLM464 NEW / DLM432

DST221

DGA506 / DGA508

DLS111

DST112

DGA519

DLS211

DTD152 / DTD153

DGA512

DLS714 / DLS600

DTD154

DGA518

DML800

DUN500W

DGA700

DML801

DUN600L

www.makita.co.nz

For all other enquiries call 0800 625 482 (0800MAKITA)

| 9

INDEX OF PRODUCTS

10 |

DUX18 NEW

DVC261

FS4300

DTD155

DVC560

DTD171

DVC660

GA4030K

DTL061

DVC750LZX1

GA4040C

DTL063

DVC265

GA4530K

DLX2302PG2 / DLX2302PT2

DVC665

GA5040

DTM50 / DTM51

DVP180

GA5021C

DLW140

DVR450

GA5030K

DTR180

DVR850

GA5050 NEW

DTS141

DWR180 NEW

GA7040S

DTW1001 / DTW1002

GA7060

DTW181 / DTW180

EA3200S

GA7061R

DTW253

EA3500S40B

GA9040S01

DTW285

EA3600F40B

GA9040SK01

DTW700

EA4300F45C

GA9060

DTW701

EA5600F45E

GB602

DTW300

EA5600FREE

GB801

DTW301

EA6100P53E

GD0600

DTW450

EA6100PRFE

GD0800C

DUC400 NEW

EA7300PRZ

GD0801C

DTW800

EA7300PZ

GF600SE

DUB185 NEW

EA7900PRZ

GN900SE

DUB186

EA7900PZ

GS5000

DUB361

EB5300TH

DUB362

EB7660TH

HG6030K

DUB363

EBH341L

HG6530V

DUC254ZN / DUC254ZNR / DUC254

EH7500SX

HG6530VKIT / HG6531CKIT

DUC356ZR / DUC356

EK6101

HK1820

DUC353ZR / DUC353

EK7301WS

HM0871C

DUH602

EK7651H

HM1203C

DUH751

DK0040T (Kit)

HM1213C

DUH523

EK8100

HM1214C

DUM111 NEW

EM2653LHN

HM1307C

DUM604

EM3400L

HM1317C

DUP362

EM7500SX

HM1812

DUR181 / DUR189

EX2650LH

HM1812X4

DUR368AZ / DUR368L /DUR369L / DUR369A

EX2650LHM

HP1630KSP

DUT130

EY2650H25H

HP2010N

DUX60

HP2050H

DUS054

FS2300

HP2051FH

DVC150L / DVC155L

FS2500

HP2070F

DVC157L

FS2700

HR3011FCWJ NEW

For all other enquiries call 0800 625 482 (0800MAKITA)

Get Connected

INDEX OF PRODUCTS

18v LXT® Lithium-Ion > COMBO

KITS

HP331D

LS1219L

RT0700CX3

HP332D

LS1221

SA7000C

HR140D

LS1440

SD100D

HR166D

LW1400

SG1251J

HR2650

SK105D / SK105GD

HR2651

M1901M

SK106D / SK106GD

HR2661

M2300B

SK209GD

HR2811F

M2401M

SK312GD

HR3200C

M3600B

SKR200Z

HR3210C

M3601M

SP6000J

HR3210FCT

M3700M

ST113D

HR4013C

M4301B

TD022DSE

HR5212C

M4501M

TD110D

HS0600

M5802B

TD111D

HS301D

M6001B

TL064D

HS6600

M6501M

TL065D

HS7600

M6901DZM

TM3000CX7

HS7611K

M8100B

TM3010CX4

HW1200

M8301DWEM

TM30D

HW1300

M8600M

TW060D/TW160D/TW161D

HW131

M8700M

TW0200 / TW0350

M9001B

TW1000

J JN1601

M9200B

TW140D / TW141D

JN3201

M92030M

UB100D NEW

JR103D

M9203B

UB1103

JR3051TK NEW

M9204B

UC4041A

JR3060T

M9400B

UH201D

JR307OCT

M9509B

UH4861

JS1602

M9510B / M9511B

UH5261

JS3201

M9800BKX2

UH6570

JS8000

ML103

UM600D

JV0600K

ML104

UR201C / UR189 / UR181

JV101D

ML106

VC2012L

JV102D

MLT100N

VC3012L / VC3012M

JV103D

MR052

VC4210L

VC4210M

N-P

KP0800K

N5900B

WR100D

KP0810K

PDC01 / PDC1200 NEW

WST01

PC5010CJ / PC5000C

WST05

WST06

L LC1230

PJ7000

LD030P

PM7650H

LD050P

PO5000C

LD080P

PV301D NEW

LD080PI

R-W

LS0714

RP0900K

ROTARY HAMMER

LS1018L

RP1800J

HAMMER DRILL/DRIVER

104

LS1019L

RP2301FCJ

IMPACT WRENCH/DRIVER

105

LS1040

RT0700C / RT0700CX2

GRINDER

102

www.makita.co.nz

XGT 40V MAX OPE TOOLS CIRCULAR SAW

For all other enquiries call 0800 625 482 (0800MAKITA)

94-95 97 99

| 11

MAX LIGHTING

10,000

3 brightness settings

High

10,000 lm

L UM E N S

Medium

4,000 lm

Low

2,000 lm

Light source

DML809

Up to 8.5 hours of continuous illumination with two 6.0Ah 18V LXT batteries on low

18V Cordless / Corded LED Worklight 10,000 Lumens

(Type : LED 96 )

High

Medium

Illuminance (lx)*1

3,800

1,500

800

Luminous flux (lm)

10,000

4,000

2,000

Continuous run time*2

1.7h

4.5h

8.5h

*1 at 1m from the light source *2 on a single full battery charge, Battery : BL1860Bx2

3 brightness settings

High MAX LIGHTING

High

3,000 10,000 lm

Low

Self-

won't f

3,000 lm

LUM EN S

Tripod

Medium

4,000 lm

Up to two DML809’s can be mounted. Height : 1,300-2,000mm Set Screw : M8

1,500 lm

Low

Part No. GM00002073

3-sta

1,300 mm

Low

2,000 lm

2,000 mm

750 lm

Light source

DML811

(Type : LED 96 )

High

Medium

Low

(Type : LED 30 )

High

Illuminance (lx)*1

3,800

1,500

800

Illuminance (lx)*1

1,800

800

Luminous flux (lm)

10,000

4,000

2,000

Luminous flux (lm)

3,000

1,500

750

Continuous run time*2

3.0h

7.0h

13h

Up to 13 hours of continuous

1.7h 8.5h Continuous run time*2 4.5h illumination with two 6.0Ah 18V Cordless / Corded *1 at 1m from the light source 18V LXT batteries on low LED Worklight 10,000 *2 on a single full battery charge, Battery : BL1860Bx2 Lumens

Adju

Light source Medium

Low 350

*1 at 1m from the light source *2 on a single full battery charge, Battery : BL1860Bx2

See more: Page 34

Contro

allowin

BRIGHTNESS 3 brightness settings

High

4 mode

Self-righting design

Spot

won't fall over even if bumped.

RANGE MODES

360°, LEFT 180°, AND RIGHT 180° 3,000 lm Spot + Medium

1,500 lm

3-stage brightness switch

Flood

Low 1

750 lm

Low

Medium

High

1,500 lm

3,000 lm

5,500 lm

18 h

8.5 h

4.0 h

Continuous run time (Battery : BL1860Bx2)

urce

Adjustable illumination area

Light source

Medium

Low

1,500

800

4,000

2,000

4.5h

8.5h

18V Cordless / Corded Wobblelight 5,500 Lumens

Illuminance (lx)*1

1,800

800

3,000

1,500

Continuous run time*2

3.0h

1,250

UP TO

Strobe

Low 350 750

Up to 18 hours 13h of continuous 7.0h illumination with two 6.0Ah *1 at 1m from the light source 18V LXT batteries charge, Battery : BL1860Bx2on low *2 on a single full battery

MAX LIGHTING

000 lm

Medium

Luminous flux (lm)

DML810

1 at 1m from the light sourceLED y charge, Battery : BL1860Bx2

tness settings

High

(Type : LED 30 )

640M BEAM DISTANCE

LUM EN S

Self-righting design

won't fall over even if bumped.

left

right

360°

180°

This mode is smooth trans

Controller with memory function remembers the brightness

Continuo

allowing the user to avoid adjusting again.

4 modes Spot

Luminous flux

600 lm

640m Spot + Flood

1,250 lm

o DML809’s can be mounted.

1,300-2,000mm m w : M8

2,000 mm

500 lm 2073

3-stage brightness switch 1,300 mm

50 lm

Flood 1

Low

Medium

High

1,500 lm

3,000 lm

5,500 lm

18 h

8.5 h

4.0 h

1,000 lm

Continuous run time (Battery : BL1860Bx2)

Adjustable illumination area

Light source : LED 30 )

High

nance (lx)*1

1,800

ous flux (lm)

3,000

us run time*2

3.0h

Medium 800 1,500

Strobe

Low

1,250 lm

350 750

DML812 13h 7.0h

*1 at 1m the light source 18Vfrom Cordless Flashlight *2 on a single full battery charge, Battery : BL1860Bx2

1,250 Lumens

left

180° Up to

360°

right

180° 10 hours of continuous illumination with One 6.0Ah allowing the user to avoid adjusting again. 18V LXT batteries on spot

Controller with memory function remembers the brightness

This mode is set by pressing the mode button long for smooth transition from any mode to use for alerting etc.

Continuous run time

(with BL1860B)

13 13

GET THE JOB DONE

HS003G 40Vmax XGT Brushless 185mm Circular Saw

DHS901 18Vx2 Brushless AWS 235mm Circular Saw

RS002G 40vmax XGT Brushless 260mm Rear Handle Saw

RS001G 40vmax XGT Brushless 185mm Rear Handle Saw

PREMIUM

DRS780

POWER

18Vx2 Brushless 185mm Rear Handle Saw

& RUN-TIME

DHS780 18Vx2 Brushless 185mm Circular Saw

DSP600 18Vx2 Brushless 165mm Plunge Cut Saw

DHS680 DSS611 18V 165mm Circular Saw

14 14 |

18V Brushless 165mm Circular Saw

DHS660 18V Brushless 165mm Circular Saw

For all other enquiries call 0800 625 482 (0800MAKITA)

Get Connected

LXT Lithium-Ion > COMBO KITS MORE POWER, SPEED18vPERFORMANCE AND RUN TIME YOU EXPECT, WITHOUT THE CORD. ®

HM002G

HM001G

40Vmax X2 (80vmax) XGT Brushless AWS™ Demolition Hammer

40Vmax XGT SDSmax Brushless AWS Demolition

HR005G

HR006G

40Vmax XGT Brushless AWS ™ 40mm Rotary Hammer

40Vmax X2 (80vmax) XGT Brushless AWS™ 52mm Demolition Hammer

HR001G

HR002G

40Vmax XGT Brushless SDS Plus Rotary Hammer

40Vmax XGT Brushless 28mm Rotary Hammer

DHR400

DHR280

18Vx2 Brushless AWS 40mm SDS Max Rotary Hammer

18Vx2 Brushless 28mm Rotary Hammer

DHR242 18V Brushless 24mm SDS Plus Rotary Hammer

DHR202 18V 20mm SDS Plus Rotary Hammer

DHR171 18V Brushless 17mm SDS Plus Rotary Hammer

www.makita.co.nz

For all other enquiries call 0800 625 482 (0800MAKITA)

15 | 15

LXT SYSTEM

WITH OVER

USE THE SAME BATTERIES AND

GET 18V

THE

WITH ONE LXT® BATTERY

ADVANTAGE L X T® B AT T ERY

UP TO

50% MORE RUN TIME

UP TO

Battery delivers constant power and run time in extreme temperatures, even in

3X FASTER CHARGING

The Makita communicates with the battery’s built-in chip throughout the charging process to optimise battery life by actively controlling current, voltage and temperature. ®

™ to protect against overload, over-discharge, and overheating.

Vs. Makita®

THE INNOVATION Automatically changes the cutting speed & torque ratio for optimum cutting performance • On light duty: high-speed rotation mode • On heavy duty: high torque mode

16 16 |

Torque limiter turns the motor off if the tool is suddenly forced to lock

GET WHAT YOU NEED USE THE SAME BATTERIES & CHARGERS WITH ALL 36V & 18V LXT For all other enquiries call 0800 625 482 (0800MAKITA)

Get Connected

18v LXT® Lithium-Ion > COMBO

275 PRODUCTS *

KITS

TOOLS

GET 36V

WITH TWO LXT® BATTERIES

Learn more:

makita.co.nz/products/

P U R P O S E - B U I LT BRUSHLESS MOTOR

UP TO

50%

™

LONGER MOTOR LIFE

EFFICIENT POWER MANAGEMENT

Makita-built Brushless Motor eliminates carbon brushes, enabling the motor to run cooler and more

ilt-in ss to olling

The demanding applications you take on every day are also demanding on your cordless tools and batteries. You rely on your tools, so Makita created Star ™ .

Vs. Makita®

Makita® Extreme Protection Technology (XPT™) is a series of protective seals inside the tool engineered to channel water, dust, and debris away from the tool's key internal components, providing durability and longer tool life.

Protection against Overloading, Over-Discharging & Overheating.

Makita® Chain saws with Magnesium components are engineered for less weight with superior balance and durability. Magnesium chain saws deliver efficient cutting performance to meet the demands of the professional.

GET WHAT YOU NEED USE THE SAME BATTERIES & CHARGERS WITH ALL 36V & 18V LXT

www.makita.co.nz

For all other enquiries call 0800 625 482 (0800MAKITA)

17 | 17

(2-PIECE KITS) 18V LXT® COMBO KITS 2–Piece Kit

DLX2127SYX

1.5

DLX2221YX1

DDF482 18V LXT 13 mm Driver Drill DTD152 Cordless Impact Driver 2 x 1.5Ah batteries (BL1815N), Charger (DC18SD), Carry Case (821524-1)

DLX2131T

5.0

DHP481 Cordless Hammer Drill Driver DTD171 Cordless Impact Driver 2 x 5.0Ah batteries (BL1860B), Charger (DC18RC), Makpac Carry Case #3

18 |

DLX2144T

DLX2221TX1

5.0

DLX2131X

DLX2145T

DLX2175T

DLX2302PT2

5.0

For all other enquiries call 0800 625 482 (0800MAKITA)

DLX2180X

3.0

DHP484 Cordless Hammer Drill Driver DTD153 Cordless Impact Driver 2 x 3.0Ah batteries (BL1830), Charger (DC18RC), Carry Case (821524-1)

DLX2130TJ4

5.0

DHP481 Brushless Hammer Drill DGA504 Brushless Angle Grinder 2 x 5.0Ah batteries (BL1850), Charger (DC18RC), Makpac case #3 (196649-3)

5.0

DVC261ZX8 18Vx2 Brushless Backpack DCL181FZWX 18V Cordless Cleaner 2 x 5.0Ah batteries (BL1850), Dual Optimum Charger (DC18RD)

3.0

DHP482 Cordless Hammer Drill Driver DTD152 Cordless Impact Driver 2 x 3.0Ah batteries (BL1830), Charger (DC18RC), Carry Case (821524-1)

DDF481 Brushless Drill Driver DTD154 Brushless Impact Driver 2 x 5.0Ah batteries (BL1850B), charger (DC18RC), Carry Case (821524-1)

6.0

DHP481 Cordless Hammer Drill Driver DTD171 Cordless Impact Driver 2 x 6.0Ah batteries (BL1860B), Charger (DC18RC), Makpac Carry Case #3

3.0

DHP458 Cordless Hammer Drill Driver DTD152 Cordless Impact Driver 2 x 5.0Ah batteries (BL1850B), Charger (DC18RC), Carry Case (821524-1)

DHP483 Cordless Hammer Drill Driver DTD155 Cordless Impact Driver 2 x 5.0Ah batteries (BL1850B), charger (DC18RC), Carry Case (821599-0)

DLX2308GJ

DLX2127X

DDF482 18V LXT 13 mm Driver Drill DTD152 Cordless Impact Driver 2 x 3.0Ah batteries (BL1830), Charger (DC18RC), Carry Case (821524-1)

DDF458 Cordless Drill Driver DTD152 Cordless Impact Driver 2 x 5.0Ah batteries (BL1850), Charger (DC18RC), Carry Case (821524-1)

DHP484 Cordless Hammer Drill Driver DTD153 Cordless Impact Driver 2 x 5.0Ah batteries (BL1850-B), Charger (DC18RC), Carry Case (821524-1)

DLX2308T

DHP483 Cordless Hammer Drill Driver DTD155 Cordless Impact Driver 2 x 1.5Ah batteries (BL1815N), charger (DC18RC), Carry Case (821599-0)

DHP482 Cordless Hammer Drill Driver DTD152 Cordless Impact Driver 2 x 5.0Ah batteries (BL1850B), Charger (DC18RC), Carry Case (824754-3)

DLX2180TX

1.5

DLX2302PG2

6.0

DVC261ZX8 18Vx2 Brushless Backpack DCL181FZWX 18V Cordless Cleaner 2 x 6.0Ah batteries (BL1850), Dual Optimum Charger (DC18RD)

Get Connected

18V LXT® COMBO KITS / SPECIALTY KITS 18v LXT® Lithium-Ion > COMBO 2–Piece Kit

DLX2295JX1 DHR282 Cordless Rotary Hammer DTW285 Cordless Impact Wrench

2–Piece Kit

5.0

4 x 5.0Ah batteries (BL1850B), dual charger (DC18RD), Makpac Carry Case #3 and #4

2–Piece Kit

DLX2185G DHP481 Brushless Hammer Drill DTW285 Cordless Impact Wrench

DSL800 18V Brushless AWS 225 mm Variable Speed Drywall Sander VC3012M M-Class Dust Extractor 30L (Wet/Dry)

6.0

DLX2250G DHP484 Cordless Hammer Drill Driver DTW285 Cordless Impact Wrench

2 x 6.0Ah batteries (BL1860B), Charger (DC18RC), Carry Case (824754-3)

2–Piece Kit

6.0

2 x 6.0Ah batteries (BL1860B), Charger (DC18RC), Carry Case (824754-3)

5.0

DLX2371TJ DTW1002 18V Brushless Impact Wrench DTW300 18V Brushless 1/2” Impact Wrench

2 x 5.0Ah batteries (BL1850), Charger (DC18RC), Makpac 1

2–Piece Kit

DK0109MUX1

KITS

5.0

AWS Adapter w/ Wireless Chip (199766-8) 2 x 18V LXT® 5.0Ah Batteries (BL1850B) 18V LXT® Dual Rapid charger (DC18RD)

5.0

DK0108LUX1 DSL800 18V Brushless AWS 225 mm Variable Speed Drywall Sander VC3012L L-Class Dust Extractor 30L (Wet/Dry)

THE LXT® ADVANTAGE

AWS Adapter w/ Wireless Chip (199766-8) 2 x 18V LXT® 5.0Ah Batteries (BL1850B) 18V LXT® Dual Rapid charger (DC18RD)

5-YEAR WARRANTY

XGT 40V & 18V CORDLESS SKINS LION WARRANTY (Effective 1st April 2020) Fast-Charging LXT® Batteries Rapid Optimum Chargers Brushless Motors STAR Protection Computer Controls™

www.makita.co.nz

5YR (Registered)* or 3YR (Registered post 30 days or Non-registered)** *Limited to purchases that are registered online at makita.co.nz (MyMakita) within 30 days of invoice. This offer is extended to purchases made between 1st January 2020 and 31st March 2020, which must be registered by 30th April 2020 to qualify.

For all other enquiries call 0800 625 482 (0800MAKITA)

| 19

3-PIECE KITS SPECIALTY KITS 2–Piece Kit

3–Piece Kit

5.0

1.5

DLX2414SY

DLX3061T

DHP487 Cordless Drill Driver DTD157 Cordless Impact Driver 2 x 1.5Ah batteries (BL1815N), Charger (DC18SD), Case (821599-0)

DHP481 Cordless Drill Driver DTD154 Cordless Impact Driver DGA504 Cordless Angle Grinder 2 x 5.0Ah batteries (BL1850), Charger (DC18RC), Bag (199936-9)

3–Piece Kit

5.0

DLX3102T DHP481 Brushless Hammer Drill DTD154 Brushless Impact Driver DHS660 Brushless 165mm Circular Saw

2 x 5.0Ah batteries (BL1850B), Charger (DC18RC), Bag (199936-9)

4–Piece Kit

DLX4124T DHP481 Brushless Hammer Drill DTD171 Brushless Impact Driver DGA504 Brushless Angle Grinder

DHP481 Brushless Hammer Drill DTD154 Brushless Impact Driver DGA508 Brushless Angle Grinder

5.0

2 x 5.0Ah batteries (BL1850B), Charger (DC18RC), Bag (199936-9)

5–Piece Kit

5.0

DHS660 Cordless Brushless 165mm Right Hand Blade Circular Saw 2 x 5.0Ah batteries (BL1850B), Charger (DC18RC) and Carry Bag (199936-9)

20 |

DLX3073T

DLX5047T

DHP481 Brushless Hammer Drill DTD153 Brushless Impact Driver DGA504 Brushless Angle Grinder DHS660 Cordless Brushless 165mm Right Hand Blade Circular Saw

For all other enquiries call 0800 625 482 (0800MAKITA)

5.0

DJR187 Brushless Reciprocating Saw 2 x LXT Lithium-Ion 5.0Ah batteries (BL1850B), Makita LXT Lithium-Ion Charger (DC18RC) and Carry Bag (199936-9)

Get Connected

18V LXT® COMBO KITS

18v LXT® Lithium-Ion > COMBO 6–Piece Kit

DLX6097T DHP481 Cordless brushless 13mm Hammer Drill/Driver DTD171 18V LXT Brushless Cordless 4-Stage Impact Driver DHS660 Cordless Brushless 165mm Right Hand Blade Circular Saw DGA504 Cordless brushless 125mm Angle Grinder

KITS

8–Piece Kit

5.0

DJR187 Cordless brushless Recipro Saw DML815 Cordless LED Flashlight 2 x 5.0Ah Batteries (BL1850B) 18V LXT® Rapid charger (DC18RC) Makita LXT® Carry Bag (831279-0)

DLX8031PT DGA504 Brushless Angle Grinder DJR187 Brushless Reciprocating Saw DHP481 Brushless Hammer Drill DTW285 Brushless Impact Wrench DTD171 Brushless Impact Driver DHR242 Brushless Combination

5.0

DHS660 Brushless Circular Saw DTM51 Brushless Multi Tool 3 x 18V LXT® Lithium-Ion 5.0Ah Battery (BL1850B) DC18RD 18V LXT Dual Rapid Charger Makita LXT® 4pc Tool Bag (199936-9)

10–Piece Kit

5.0

DLX1020TX1 DTD171 18V LXT Brushless 4-Stage Impact Driver DHS660 18V LXT Brusless 165mm Circular Saw DHP481 18V LXT Brushless 13mm Hammer Drill Driver

www.makita.co.nz

DGA504 18V LXT Brushless 125mm Slide Switch Angle Grinder DJR187 18V LXT Brushless Reciprocating Saw DTW285 18V LXT Brushless 1/2” Impact Wrench

DTM51 18V LXT Multi Tool DHR171 18V LXT Brushless 17mm SDS Plus Rotary Hammer DKP181 18V LXT Brushless 82mm Planer DUB185 18V LXT Blower, Short nozzle

For all other enquiries call 0800 625 482 (0800MAKITA)

3 x 18V LXT® Lithium-Ion 5.0Ah Battery (BL1850B) DC18RC-L 18V LXT Rapid Charger Makita Li-ion LXT Duffel Tool-bag (831279-0)

| 21

DRILLS / FASTENING DTD171 18V LXT Brushless 4-Stage Impact Driver ®

22 22 |

For all other enquiries call 0800 625 482 (0800MAKITA)

Get Connected

18V LXT® HAMMER DRIVER-DRILLS / DRIVER DRILLS ®

18v LXT Lithium-Ion > COMBO

DHP481

Hammer Driver-Drills

DHP483

KITS

DHP484

DHP482

18v LXT® Brushless 13mm 18v LXT® Brushless 13mm 18v LXT® Cordless 13mm 18v LXT® Brushless 13mm Hammer Driver-Drill Hammer Driver-Drill Hammer Driver-Drill Hammer Driver-Drill 125Nm Max lock torque

Ultra Compact and ergonomic design

Compact and lightweight design

Delivers Up To 55% more speed

(Steel, wood, masonry)

13 / 76 / 16 mm

13 / 36 / 13 mm

13 / 38 / 13 mm

No Load Speed (RPM)

0 - 2,100 / 0 - 550 RPM

0 - 1,700 / 0 - 500 RPM

0 - 1,900 / 0 - 600 RPM

0 - 2,000 / 0 - 500 RPM

Maximum Torque

Hard / Soft: 115 / 60 N·m

Hard / Soft: 40 / 23 N·m

Hard / Soft: 62 / 36 N·m

Hard / Soft: 54 / 30 N·m

Dimensions (L x W x H)

205x79x249 mm

176x79x247 mm

198x79x249 mm

182x79x261 mm

Net weight

2.7 - 3 kg

1.3 - 1.6 kg

1.5 - 1.8 kg

1.6 - 1.9 kg

DHP485

Hammer Driver-Drills

DHP458

18v LXT® Brushless 13mm 18v LXT® Cordless 13mm Hammer Driver-Drill Hammer Driver-Drill

DHP451

DDF458

8v LXT® Cordless 13mm Hammer Driver-Drill

18v LXT® Cordless 13mm Driver-Drill

BL motor delivers 50 N·m

Delivers 84 N·m of Max Torque

Features 3 Speed RPM Range

Delivers 91 N·m of Max Torque

(Steel, wood, masonry)

13 / 38 / 13 mm

13 / 76 / 16 mm

13 / 65 / 16 mm

13 / 76 mm

No Load Speed (RPM)

0 - 1,900 / 0 - 500 RPM

0-2,000 / 0-400 RPM

0-1,700 / 0-300 RPM

0-2,000 / 0-400 RPM

Maximum Torque

Hard / Soft: 54 / 25 N·m

Hard / Soft: 91 / 58 N·m

Hard / Soft: 80 / 40 N·m

Hard / Soft: 91 / 58 N·m

Dimensions (L x W x H)

182x79x255 mm

225x79x259 mm

250x78x257 mm

225x79x259 mm

Net weight

1.5 - 1.8 kg

2.2 - 2.6 kg

2.5 - 2.9 kg

2.1 - 2.5 kg

DDF083

Driver-Drills

DDF485

18v LXT® Brushless 6.5mm Driver-Drill

18v LXT® Brushless 13mm Driver-Drill

DDF481

18v LXT® Brushless 13mm Driver-Drill

DDF482

18v LXT® Cordless 13mm Driver-Drill

Ultra-compact and ergonomic design

Max 1,900 RPM & 50 N·m

The highest torque in the industry

Compact and lightweight design

(Steel / Wood)

13 / 36 mm

13 / 38 mm

13 / 76 mm

13 / 38 mm

No Load Speed (RPM)

0 - 1,700 / 0 - 500 RPM

0 - 1,900 / 0 - 500 RPM

0 - 2,100 / 0 - 550 RPM

0 - 1,900 / 0 - 600 RPM

Maximum Torque

Hard / Soft: 40 / 23 N·m

Hard / Soft: 50 / 25 N·m

Hard / Soft: 115 / 60 N·m

Hard / Soft: 62 / 36 N·m

Dimensions (L x W x H)

124x79x247 mm

169x79x255 mm

205x79x266 mm

185x79x249 mm

Net Weight

1.1 - 1.4 kg

1.4 - 1.7 kg

2.7 - 3 kg

1.5 - 1.8 kg

DUT130

Driver-Drills

DF001DW

VARIABLE 2-SPEED DESIGN (0-350 RPM and 0-1300 RPM) for optimum speed control and mixing versatility

18v LXT® Brushless 165mm Mixing Drill Up to 80 MIns Runtime, 1 x 6.0Ah Shaft Diameter

M12 / M14

No Load Speed (RPM)

High: 1,300 RPM

Max Output

650 W

Dimensions (L x W x H)

916x89x231 mm

Net weight

2.5 - 2.8 kg

www.makita.co.nz

PROTECTIVE COVER Helps prevent battery contamination from mixing compound splash back

3.6V Li-Ion In-Line Cordless Screwdriver with Case Delivers 6.0Nm max torque Wood Screw: ø3.8 x 32 mm 220 6.0 N·m / Hard / Soft: 4.0 / 3.0 N·m 205x47x51 mm (Pistol style) 0.36 kg

For all other enquiries call 0800 625 482 (0800MAKITA)

| 23

18V LXT® DRIVER DRILL / ANGLE DRIVER / IMPACT DRIVER DDF484

Driver-Drills

DDF483

LXT® BRUSHLESS ™ MOTOR 18v LXT® Brushless 13mm Driver-Drill

18v LXT® Brushless 13mm Driver-Drill

Delivers 25% more drilling, driving

Ultra-compact , ergonomic design

(Steel / Wood)

13 / 38 mm

13 / 36 mm

No Load Speed (RPM)

0 - 2,000 / 0 - 500 RPM

0 - 1,700 / 0 - 500 RPM

Maximum Torque

Hard / Soft: 54 / 30 N·m

Hard / Soft: 40 / 23 N·m

Dimensions (L x W x H)

172x79x261 mm

162x79x247 mm

Net weight

1.5 - 1.8 kg

1.2 - 1.6 kg

DTL061

Angle Impact Driver

UP TO

50%

LONGER MOTOR LIFE

DTL063

18v LXT® Cordless 1/4” Angle Impact Driver

18v LXT® Cordless 3/8” Angle Impact Driver

DTS141

18v LXT® Brushless Oil-Pulse Driver

DTD152

18v LXT® Cordless Impact Driver

Compact right angle impact driver

“T” mode: Tightening mode

Hex Shank

6.35 mm (1/4”)

9.5 mm (3/8”)

Machine Screw: M4 - M8

6.35 mm (1/4”) hex

No Load Speed (RPM)

0 - 2,000

0 - 3,200 RPM

0 - 2,900 RPM

Maximum Torque

60 N·m

40 N·m

165 N·m

Dimensions (L x W x H)

387x78x116 mm

136x79x240 mm

137x79x238 mm

Net weight

1.4 - 2.0 kg

1.3 - 1.6 Kg

1.3 - 1.6 kg

DTD171

Impact Driver

DTD154

Compact and lightweight design

DTD155

DTD153

18v LXT® Brushless Wood / Bolt / T-Mode Impact Driver

18v LXT® Brushless T-mode Impact Driver

18v LXT® Brushless Cordless Impact Driver

18v LXT® Brushless A-Mode Impact Driver

116 mm long for maximum control

ULTRA-COMPACT ergonomic

Higher speed 3,400 RPM

3-Mode operation for A-mode

Hex Shank

6.35 mm (1/4”) (hex)

No Load Speed (RPM)

0- 3,600 RPM

0 - 3,400 RPM

0 - 1,300 RPM

Maximum Torque

180 N·m

175 N·m

170 N·m

140 N·m

Dimensions (L x W x H)

117x79x236 mm

126x79x238 mm

135x79x232 mm

Net weight

1.2 - 1.5 kg

1.3 - 1.6 kg

1.2 - 1.5 kg

DDA460

Angel Drill

DDA450

DDA350 ENHANCED ANVIL HOLDER RIGIDITY

18v X2 LXT® Brushless 13mm Angle Drill

18v LXT® 13mm Angle 18v LXT® Cordless Drill with Keyed Chuck 10mm Angle Drill

Powerful drilling even large diametre holes Powerful drilling even large diametre holes Close Quarters Drilling and Driving Capacity

13 / Wood (Hole saw ) 159 mm

13 / Wood (Hole saw ) 127 mm

10 / 25 mm

No Load Speed (RPM)

0 - 1,400 / 0 - 350 RPM

0 - 1,400 / 0 - 450 RPM

0-1,800 RPM

Maximum Torque

Vibration level: Metal: 2.5 m/s² or less

13.7 N·m

Dimensions (L x W x H)

538x116x193 mm

338x82x179 mm

314x79x115 mm

Net weight

6.3 kg

3.2-3.5 kg

1.5 - 1.8 kg

24 |

For all other enquiries call 0800 625 482 (0800MAKITA)

Introducing Makita’s new DTD171Z has 4 assist mode + 4 impact force to improve work efficiency 1

4 C

T 1 2

Get Connected

18V LXT®®IMPACT WRENCHES

18v LXT Lithium-Ion > COMBO

KITS

DTW300

DTW301

DTW285

18v LXT® Brushless 1/2” Impact Wrench

18v LXT® Brushless 1/2” Detent Pin Impact Wrench

18v LXT® Brushless 1/2” Impact Wrench

Variable 4-speed fastening control

3-speed power selection switch

Automatic pressure switching function maintains steady flow rate

Hex Shank

12.7 mm (1/2”) (square)

Max pushing force: 10,000psi

Impact Rate

4,000 ipm

3,500 ipm

Flow Rate: Low: 145mL/min

Max. fastening torque

330 N·m

280 N·m

Overall Length

147mm

440mm

Skin weight

1.1 kg

5.2 kg

Impact Wrenches

1.1 kg

DTW180

DTW800

18v LXT® Brushless SubCompact Impact Wrench

18v LXT® Brushless Cordless Impact Wrench

Lightweight & Compact 55 mm

Hex Shank

12.7 mm (1/2”) (square)

9.5 mm (3/8”) (square)

11.1 mm (7/16”) (Hex)

RPM (High / Med / Low)

Hard / Soft: 0 - 2,400 / 0 - 1,300

High 0 - 2,400 /Soft 0 - 1,300

0-1,800/0 -1,000 /0 -900

Maximum Torque

210 N·m

180 N·m

800 N·m

Dimensions (L x W x H)

151x79x235 mm

144x79x218 mm

229x91x303 mm

Net weight

1.2 - 1.5 kg

3.4 - 3.7 kg

DTW450

Impact Wrenches

18v LXT® Li-Ion Cordless Impact Wrench

1/2” Sq. Drive Designed for Faster and Convenient Fastening

DTW253

18v LXT® Grease Gun

High: 290mL/min

DTW181

Impact Wrenches

DGP180

Makita’s Most POWERFUL 800 N·m

INNOVATION

DTW181Z Reverse Rotation Auto-Stop Mode stops rotation and impact when fastener is loosened adequately

DWR180

Ratchet Wrench

18v LXT® Cordless Ratchet Wrench

18v LXT® Li-Ion Cordless Impact Wrench

800rpm producing up to 47.5Nm max fastening torque

Compact and lightweight

Hex Shank

12.7 mm (1/2”) (square)

9.5 mm (3/8”) (square)

Capacity

Standard Bolt: M5 - M12

RPM (High / Med / Low)

1,600

0 - 2,100

Square Drive

9.5 / 6.35 mm

Maximum Torque

440 N·m

210 N·m

No Load Speed(RPM)

0 - 800

Dimensions (L x W x H)

266x82x290 mm

155x79x234 mm

Max Fastening Torque

47.5 N·m

Net weight

3.1 - 3.4 kg

1.3 - 1.6 kg

Net weight

1.2 - 1.6 kg

DTW700

DTW1002

DTW1001

18v LXT® Brushless 1/2” Impact Wrench

18v LXT® Brushless 18v LXT® Brushless 1/2” Impact Wrench Detent 1/2” Impact Wrench

18v LXT® Brushless 3/4” Impact Wrench

Impact Wrenches

DTW701

1,000Nm of nut busting torque

1,600Nm of nut busting torque

1,700Nm of nut busting torque

Hex Shank

12.7 mm (1/2”) (square)

19 mm (3/4”) (square)

RPM (High / Med / Low)

2,200 / 1,900 / 1,200 / 500

1,800 / 1,000 / 900

Max. Fastening Torque

Max: 700Nm, Hard: 320Nm

1,000 N·m

1,050 N·m

Overall Length

170mm

229mm

Skin weight

2.1 kg

3.0 kg

3.1 kg

www.makita.co.nz

For all other enquiries call 0800 625 482 (0800MAKITA)

| 25

CIRCULAR SAWS DRS780 18Vx2 LXT Cordless Brushless 185mm Rear-Handle Circular Saw ®

26 |

For all other enquiries call 0800 625 482 (0800MAKITA)

Get Connected

18V LXT® SAWS

18v LXT® Lithium-Ion > COMBO DSP601

Plunge Saw / Circular Saw

DSP600

DHS661

KITS

DHS660 198901-5

18V X2 (36V) LXT AWS Brushless 18V X2 (36V) LXT® Brushless 18v LXT Brushless AWS 165 mm 18v LXT Brushless 165 mm 165 mm Plunge Cut Saw 165 mm Plunge Cut Saw Right hand blade Circular Saw Right hand blade Circular Saw Auto-start Wireless System (AWS) for on demand dust extraction

Automatic torque drive increases torque to power through any cut

Compact at Only 270 mm Long for Vastly-Increased Maneuverability

Max cut capacity of 57mm with up to 50O bevel capacity

Blade Diameter

165mm (6-1/2”)

165 mm / Efficut Blade # B-62991

No Load Speed (RPM)

2,500 - 6,300

5,000

Cutting Cap. 90 °/45 °/50 °

56 mm / 40 mm / 38 mm

57 mm / 41 mm / 37 mm

Dimensions (L x W x H)

346x241x272 mm

270x186x250 mm

Skin weight

4.5 kg

2.53kg

165 mm / Efficut Blade # B-62991 5,000 57 mm / 41 mm / 37 mm 270x186x250 mm 2.49kg

DHS901

Circular Saws 18V

DHS680

18V X2 Brushless AWS* 18v LXT® Brushless 235mm (9-1/4”) Circular Saw Cordless Circular Saw

DSS501

18v LXT® Cordless Circular Saw

57 mm Maximum Cutting Capacity

Compact and lightweight design

Blade Diameter

235 mm (9-1/4”)

165mm (6-1/2”)

No Load Speed (RPM)

4,500

5,000

3,700

3,600

Cutting Cap. 90 °/45 °/50 °

85 mm / 61 mm / 44 mm

57 mm / 41 mm / 37 mm

57 mm / 40 mm / 36 mm

51 mm / 35 mm

Dimensions (L x W x H)

430x224x316 mm

350x170x238 mm

347x202x228 mm

364x183x201 mm

Skin weight

5.2 kg

2.7kg

2.9kg

2.4 kg

Up to

110 Cuts in 80mm x 300mm / 5.0ah BL™ Motor Delivers 5,000 RPM

DSS611

DRS780

Circular Saws

DHS781

DHS710

DHS780 198901-5

18V X2 (36V) LXT® Brushless 18V X2 (36V) LXT® Brushless 18V X2 (36V) LXT® Brushless 18V X2 (36V) LXT® Cordless 190 mm Circular Saw 185 mm Rear Handle Saw 185 mm Circular Saw with AWS 185 mm Circular Saw Up to

558 Cuts in 4 x 2 Timber using 5.0ah Includes: Efficut Blade 185 #B-62044 Includes: Efficut Blade 185 #B-62044 Max cut capacity of 68.5mm

Blade Diameter

185mm (7-1/4”)

190 mm

No Load Speed (RPM)

5,100

6,000

4,800

Cutting Cap. 90 °/45 °/ 53 °

65 mm / 45 mm / 38 mm

66 mm / 45.5 mm / 34mm

68.5 mm / 49 mm / 44mm

Dimensions (L x W x H)

446x196x270 mm

342x200x290 mm

356x217x298 mm

Net weight

4.6 kg

4.2 kg

4.1 kg

Jig Saws/ Recipro Saw

DJV181

DJV182

DJR183

DJV180

18v LXT® Brushless Barrel 18v LXT® Brushless Top Handle Jig Saw Handle Jig Saw

18v LXT® Cordless 3 Settings, Jig Saw

18v LXT® Cordless Compact Recipro Saw

Powerful Brushless DC motor

Top handle type cordless jig saw

High accuracy and high efficiency

Compact for Close Quarter Cutting

Length of Stroke

26 mm (1”)

13 mm (1/2”)

Strokes Per Minute (SPM)

800 - 3,500

0-2,600

0-3,000

Cutting Capacity

Wood: 135mm Steel: 10mm

50 mm / 50 mm

Dimensions (L x W x H)

298x77x189 mm

266x77x208 mm

257x73x208 mm

392x81x209 mm

Net weight

2.3 - 2.6 kg

2.4 - 2.7 kg

2.7 - 3.0 kg

1.5 - 1.7 kg

www.makita.co.nz

For all other enquiries call 0800 625 482 (0800MAKITA)

| 27

18V LXT® RECIPRO SAWS / CONCRETE DJR188

Recipro Saws

DJR186

DJR187

18v LXT® Brushless Cordless Recipro Saw

18v LXT® Cordless Recipro Saw

18v LXT® Brushless Cordless Recipro Saw

Compact and Lightweight

Faster Cutting Speed

BL™ Motor Runs Cooler and Efficiently

Length of Stroke

20 mm

32 mm

Strokes Per Minute (SPM)

0 - 3,000

0 - 2,800

0 - 3,000 / 0 - 2,300

Capacity Pipe / Wood

130 mm / 255 mm

Dimensions (L x W x H)

316x81x220 mm

486x81x223 mm

439x83x231 mm

Net weight

2.6 - 2.9 kg

3.5 - 3.8 kg

3.4 - 3.8 kg

DHR182

Rotary Hammer

DHR171

DJR360

18v X2 LXT® (36V) Brushless Recipro Saw Two 18V LXT® Batteries (36V) Deliver the Power of a Corded Recipro Saw

32 mm 0 - 3,000 / 0 - 2,300 130 mm / 255 mm 449x116x243 mm 4.0 - 4.7 kg

DHR165

DHR202

18v LXT® Brushless 18mm 18v LXT® Brushless 17mm AWS AVT Rotary Hammer Cordless Rotary Hammer

18v LXT® Cordless 16mm Rotary Hammer

18v LXT® Cordless 20 mm Rotary Hammer

BL Motor & AVT + AWS + SOFT NO LOAD Compact and Light weight

Compact and Light weight

Compact D-Handle Grip Design

No Load Speed

0 - 1,350

0 - 680

0-1,600

0 - 1,100

Blows Per Minute

0 - 5,000

0 - 4,800

0 - 5,300

0 - 4,000

Concrete / Steel / Wood

18 mm / 13 mm / 24 mm

17 mm /10 mm / 13mm

16 mm /13 mm / 24mm

20 mm /13 mm / 26mm

Dimensions (L x W x H)

301x82x285 mm

273x86x211 mm

297x79x253 mm

358x84x259 mm

Net weight

2.4 - 3.2 kg

2.1 - 2.8 kg

2.3 - 3 kg

3.2 - 4 kg

DHR242

Combination / Rotary Hammer

DHR400

DHK180

DCE090

DX02

18v LXT® Brushless 24mm Rotary Hammer

18V X2 (36V) LXT® Brushless 3.1 J Brushless Power AWS Cordless Rotary Hammer Scraper, SDS-PLUS Bits

18V X2 (36V) LXT® Brushless 230 mm (9”) Power Cutter

2.0j of impact energy for drilling

Auto-start Wireless System (AWS)

Anti-vibration housing and AVT

AFT Active Feedback sensing Tech.

No Load Speed (RPM)

950

250 - 500

Shank: SDS-PLUS Bits

Impact Rate

4,700 IPM

1,450 - 2,900

Blows per min: 3,200

Concrete / Steel / Wood

24mm / 13mm / 27mm

TCT Bit: 40 mm Core Bit: 105 mm

Joules: 3.1 J

Impact energy

2.0j

473x120x285 mm

Max output: 470W

Skin weight

2.7 kg

7.3 - 8.1 kg

Net weight: 3.3kg

230mm (9”) 88mm 6,600 565 x 248 x 285 mm Net weight: 6.4kg

DHR280

Rotary Hammer / Concrete Vibrator

DHR282

DHR283

DVR450 / DVR850

18V X2 (36V) LXT® Brushless 18V X2 (36V) LXT® Brushless 18V X2 (36V) LXT® Brushless 28mm Rotary Hammer 28mm Rotary Hammer AWS 28mm Rotary Hammer

18v LXT® Cordless Concrete Vibrator

9.0m/s² of vibration thanks to AVT

9.5m/s² of vibration thanks to AVT

DVR450 1.2m / DVR850 2.4m

No Load Speed (RPM)

980

No load Vibrations: 13,000 / 12,500

Impact Rate

5,000 IPM

Vibrator dia: 25 mm / 25 mm

Concrete / Steel / Wood

28mm / 13mm / 32mm

Shaft length: 1,200 mm / 2,400 mm

Impact energy

2.8j

2.9j

Overall length: 1,483 / 2,683 mm

Skin weight

3.8 kg

3.9 kg

Net weight: 3.3kg / 4.5kg

28 |

For all other enquiries call 0800 625 482 (0800MAKITA)

Get Connected

18v LXT® Lithium-Ion > COMBO

KITS WOODWORKING / METALWORKING / AUTOMOTIVE

DLS211 18V X2 (36V) LXT Brushless AWS 305 mm (12”) Slide Compound Mitre Saw

www.makita.co.nz

For all other enquiries call 0800 625 482 (0800MAKITA)

29 | 29

18V LXT® WOODWORKING / METALWORKING / AUTOMOTIVE DLS211

DLS111

18v X2 LXT® BL AWS 305mm (12”) Slide Compound Saw

18v X2 LXT® BL AWS 260mm (10-1/4”) Slide Compound Saw

48° left and right bevel capacity and 60° left and right mitre

Large cut capacity up to Max Width: 68 x 310mm, Max Height: 91 x 279mm

305mm (12”)

260 mm (10-1/4”)

190 mm (7-1/2”)

165 mm (6-1/2”)

0° Max. width: 92 x 382mm

0° Max. width: 91 x 279 mm

0° Max. width: 52 x 300 mm

0° Miter: 46 x 92 mm

0° Max. height: 107 x 363mm 4,400 30.1kg

0° Max. height: 68 x 310 mm 4,400 26.7kg

45° mitre: 52 x 212mm 5,700 11.9 kg

45° Miter, L/R: 46 x 65 mm

Woodworking

Blade Diameter Cutting capacities No Load Speed (RPM) Skin weight

DRT50

Woodworking

DLS714

18vX2 LXT® BL 190mm 18v LXT® Brushless (7-1/2”) Slide Compound Saw 165mm (6-1/2”) Mitre Saw Large cut capacity up to 52 x 300mm Large cut capacity up to 46 x 92mm

DKP181

18v LXT® Brushless 18v Brushless AWS Cordless Laminate Trimmer Cordless 82 mm Planer

DLS600

5,000 6.0 kg

DKP180

18v LXT® 82 mm Cordless Planer

DPJ180

18v LXT® Plate Joiner

BL motor delivers the power and performance for corded demands

High power 3mm max planning depth

High power-to-weight ratio

Delivers up to 300 Cuts or 150 Joints on a Single Charge

Collet Capacity

6.35mm (1/4”) / 9.53mm (3/8”)

Planing Width: 82 mm

Blade Diameter: 100 mm (4”)

Capacity - Plunge capacity

0-40mm

Planing Depth: 3.0mm

Planing Depth: 2.0 mm

Max cutting depth: 20mm (3/4”)

No Load Speed (RPM)

10,000 - 30,000RPM

No Load Speed (RPM): 12,000

No Load Speed (RPM): 14,000

No Load Speed (RPM): 6,500

Overall Length

226 mm

333x156x166 mm

333x157x160 mm

351x139x149 mm

Skin weight

1.5kg

3.3kg

2.8kg

2.4kg

DBO180

DPO600

Automotive/ Multi-Tool

18v LXT® Brushless Cordless 150 mm (6”) Orbit Polisher

18v LXT® 125 mm (5”) Random Orbit Sander

DTM50

DTM51

18v LXT® Multi-Tool

18v LXT® Multi-Tool “Tool-less” 12 Angle settings at every 30° from 0° to 360°

Runtime Up to 25 mins using 6.0Ah

with Built-In Dust Extraction System

Anti-restart function prevents accidental startup

Blade diameter

Pad Size: 150 mm (6”)

Abrasive paper: 125mm

6,000-20,000

Max Output

OPM: Normal mode: 0 - 6,800

Orbit diameter: 2.8mm

3.2°

Left / Right / Total: 1.6° / 1.6° / 3.2°

No Load Speed (RPM)

SPM: Normal mode: 0 - 13,600

7,000 / 9,500 / 11,000 Opm

all Bosch OIS

Compatible to all Bosch OIS

Dimensions (L x W x H)

530x148x124 mm

175x123x153 mm

307x80x122 mm

340x80x122 mm

Net weight

3.1 - 3.6 kg

1.1 kg

1.8 - 2.2 kg

2.0 - 2.4 kg

DPP200

Metalworking

18v LXT® Cordless Hole Puncher

20mm holes through steel plate 8mm Cutting Capacity

Steel: 20 mm Stainless Steel: 20 mm

Max Throat Depth

40 mm

Dimensions (L x W x H)

417x127x315 mm

Net weight

10.5kg

30 |

DJN161

DSC102

® 18v LXT® Cordless (16Ga) 18v / 14.4V LXT BL Threaded Rod Cutter 1.6 mm Nibbler

Makita-built motor delivers 1,900 SPM

More Compact & High Productivity

Steel up to 400 N/mm² : 1.6 mm Mild Steel: W3/8, M10, M8, M6 Steel up to 600 N/mm² :1.2 mm Min. Cutting Length: 20 mm

DSC251

18v LXT® Steel Rod Cutter Ideal for edge cutting of threaded rods and rebars 110 mm Dia.: 10 - 25 mm (3/8” - 1”)

1,900

Max Output: 280W

2,200

313x78x189 mm

199x103x308 mm

471x137x139 mm

1.9 - 2.3 kg

2.8 - 3.2 kg

3.9 - 4.0 kg

For all other enquiries call 0800 625 482 (0800MAKITA)

Get Connected

18V LXT® METALWORKING

18v LXT® Lithium-Ion > COMBO

KITS

DSC121

DLW140

18v LXT® Brushless Rebar 18v LXT® Rebar Cutter Cutter Up to 75 cuts of 20 mm rebar with

18v Threaded Rod Cutter

Up to 280 cuts of 16 mm rebar with a 6.0Ah LXT battery

a 3.0Ah LXT battery

Cuts M12 stainless steel threaded rod with ease

18v X2 LXT® (36V) 355mm 14” Portable Cut off Saw

Capacity

Dia.: 3 - 16 mm

Dia.: 3 - 20 mm

Cutting Speed: 3.0 Seconds

Cutting Capacity

Cutting Speed: 2.8 Seconds

6.5

M12

Blade Speed

4,000 Cuts Per Blade

Dimensions (L x W x H)

360 x 108 x 276 mm

412x212x284 mm

Overall length: 212mm

Skin weight

6.9 kg

11.1 - 11.2 kg

5.4 kg

DSC163

Metalworking

DSC191

DPB183

Metalworking

18v LXT® Brushless Portable Band Saw

DPB184

18v LXT® Brushless Portable Band Saw

80+ Cuts in 1.6mm (14GA) Metal Stud with 4-stage indicator light

355 mm (14”) 1,300 W 3,800 RPM 537x280x640 mm 15.66kg

DPB182

DPB180

18v LXT® Cordless Portable Band Saw

Aluminium housing, Cutting up to 66mm Aluminium housing, Cutting up to 51mm Up to 260 Cuts on Carbon Steel pipe*

Accepts standard blades 1,140 x 13 mm

Blade size (LxWxH)

835 x 13 x 0.5mm

730 x 13 x 0.5mm

835 x 13 x 0.5mm

1,140 x 13 x 0.5mm

Max. blade speed

192m/min

84 - 162m/min

Max. cutting capacities

66mm x 66mm

51mm x 51mm

Up to 192m/min

120mm x 120mm

Overall Length

392mm

373mm

477mm

523mm

Net weight

3.3 kg

3.0 kg

3.5 kg

DJS131

Metalworking

DJS200

5.8 kg

DJS800

DJS161

14 18v LXT® Brushless 1.6 mm Offset Shear

18v LXT® Brushless 2.0 mm Straight Shear

18v LXT® Brushless 13 mm Cement Shear

18v LXT® Cordless 1.6 mm Straight Shear

Corrugated steel up to 1.3mm (18Ga) Cuts up to 2.0mm steel (14Ga)

Cuts up to 13 mm cement fibre

Cuts up to 1.6mm mild steel

Max. mild steel

1.3 mm (18 gauge)

2.0 mm (14 gauge)

Max. Cutting: 13 mm

1.6mm

Max. stainless steel

1.0 mm (20 gauge)

1.6 mm (16 gauge)

1.2mm

No Load Speed

0-3,000spm

4,300spm

Overall Length

332mm

345mm

379mm

362mm

Skin weight

1.7kg

1.9kg

1.8kg

Metalworking/ Screwdriver

DCS553

DJS130

1.4 kg

DCS552

DFR450

Screws not included

18v LXT Cordless 1.3 mm 18v LXT Brushless 150 mm 18v LXT Cordless ADT Metal Cutter 136mm Metal Cutter Metal Shear

18v LXT Cordless Auto Feed Screwdriver

Swivel Shear Head Rotates 360°

Electric brake for maximum productivity

Compact / lightweight 4-pole motor

136 mm (5-3/8”)

Driving Shank: 6.35 mm (1/4”) Hex

90°: 51 mm (2”)

Screw Strip: 4 x 20 - 41 mm

Blade size (LxWxH) Max. blade speed Max. cutting capacities

Automatic Torque Drive Technology

Steel up to 400 N/mm² : 1.3 mm 150 mm (5-7/8”) Steel up to 600 N/mm² : 1.0 mm 90°: 57.5 mm (2-1/4”)

No Load Speed: 2,800

4,200

3,600

No Load Speed: 4,000

Overall Length

350x80x193 mm

267x186x250 mm

348x196x203 mm

368 mm

Net weight

2.3 - 2.6 kg

2.8 - 3.1 kg

2.4 - 2.7 kg

1.9 - 2.9 kg

www.makita.co.nz

For all other enquiries call 0800 625 482 (0800MAKITA)

| 31

18V LXT® METALWORKING / DRYWALL DGA519

Metalworking

DGA508

DGA518

DGA452 DISC : A-80656

18v LXT® Brushless Paddle Switch X-Lock Angle Grinder

18v LXT® Brushless AWS Paddle Switch Angle Grinder

18v LXT® Brushless Paddle Switch Angle Grinder

18v LXT® Cordless Slide Switch Angle Grinder

X-Lock allows easy accessories installation

Variable Speed Control Dial / AWS

Electric Brake, Paddle Switch No-Lock Compact Barrel Grip for Handling

Grinding Wheel

125 mm (5”)

115 mm (4-1/2”)

Sound Pressure Level

80 dB(A)

79 dB(A)

76 dB(A)

No Load Speed

3,000 - 8,500rpm

8,500

11,000

Overall length

396mm

382 mm

362mm

317 mm

Skin weight

2.5kg

2.5 kg

2.0 kg

DGA504

Metalworking

1.9kg

DGA512

DGA701

18v LXT® Brushless Slide Switch Angle Grinder

18v X2 LXT® (36V) 7” AWS Brushless Angle Grinder

DGA506 DISC : A-80656

18v LXT® Brushless Slide Switch Angle Grinder

Kickback detection, anti-restart ,soft start Anti-Restart Function, Electric Brake Variable Speed Control Dial Grinding Wheel

125 mm (5”)

Sound Pressure Level

79 dB(A)

No Load Speed

8,500

3,000 - 8,500

Dimensions (L x W x H)

362mm

382mm

Skin weight

2.0 kg

Metalworking/ Cutting

Grinding Wheel Sound Pressure Level No Load Speed Dimensions (L x W x H) Net weight

Drywall Tool and Sanders

DGA901

2.5 kg

DGA700

180 mm (7”) 88 dB(A) 7,800 499x200x158 mm 5 - 6 kg

DGA900

DCC501

18v X2 LXT® (36V) 9” AWS 18v X2 LXT® (36V) 7” Brushless Angle Grinder Brushless Angle Grinder

18v X2 LXT® (36V) 9” Brushless Angle Grinder

18v LXT® Cordless 125 mm (5”) Cutter, Wet Type

ADT, Electronic brake, kickback detection, anti-restart and soft start

ADT, Electronic brake, Auto-start Wireless System (AWS)

230 mm (9”) 88 dB(A) 6,000 499x250x158 mm 5.2 - 8 kg

180 mm (7”) 88 dB(A) 7,800 499x200x158 mm 5 - 6 kg

230 mm (9”) 88 dB(A) 6,000 499x250x158 mm 5.2 - 8 kg

Blade Diameter:125 mm (5”) 96 dB(A) 8,800 231 x 163 x 172 mm 2.7 - 3.0 kg

DSL800

DSD180

DPV300

18v LXT® Brushless AWS 18v LXT® Cordless 255mm Drywall Sander Drywall Saw

18v LXT® Brushless 75mm Sander Polisher

AWS Connects to Vacuum cleaner

Ideal for cutting holes in drywalls

Variable 2 speed

Pad diametre

210 mm / Abrasives : 225 mm

6 mm (1/4”)

50 / 80 mm

No Load Speed (RPM)

1,800 RPM

30mm / 15mm

46 / 75 mm

Optional Accessory

Extension Handle Set (199937-7)

0 - 6,000

Polishing/ Sanding:2,800/9,500

Dimensions (L x W x H)

1,520x259x273 mm

263x79x291 mm

152 x 79 x 205 mm

Net weight

4.5 - 5.7 kg

1.7 - 2.0 kg

1.3 - 1.6 kg

32 |

ADT, Electronic brake, kickback detection, anti-restart and soft start

For all other enquiries call 0800 625 482 (0800MAKITA)

Push Drive™ Technology – in lock-on mode the motor starts only when the fastener is engaged for a quieter work environment and to save battery power

Get Connected

FASTENING / CAULKING GUN / CORDLESS FAN ®

18v LXT Lithium-Ion > COMBO

DCO181

Cut-out Tool

DCO180

Slim body design for Comfort

3.18 mm (1/8”)

No Load Speed

3.18 mm (1/8”)

32,000

Stroke length of shoe plate:

DCG180

Caulking Gun

18v LXT® Cordless Caulking Gun

18v LXT® Brushless AWS 18v LXT® Cordless 6.35 Cut-Out Tool mm (1/4”) Cut-Out Tool Collect

KITS

Delivers an industry-leading 5,000 N Dispersing Force

5,000 N

30,000

No Load Speed

0 - 28 mm/sec

9.2 - 31mm

11.5 - 31mm

Holder

300, 600, 800 mL

Overall length

293 mm

313 mm

Dimensions

404x108x281 mm

Net weight

1.1 kg

Skin Weight

2.1 - 3.0 kg

Fastening

DFS452

DFS452ZX2

DFS250

DFS251

18v LXT® Brushless Drywall Screwdriver

Push Drive Technology - in lock-on mode

Includes autofeed attachment

High torque ideal for decking

High torque ideal for fastening

Drive Shank

6.35mm (1/4”)Hex

6.35 mm (1/4”) Hex

No Load Speed

4,000 RPM

2,500 RPM

Max Capacity drywall

ø 5mm

Collated screw depth 25-55mm

5 mm (3/16”)

Dimensions (L x W x H)

251x79x259 mm

259x79x259 mm

237x79x259 mm

Net weight

1.1 kg

1.5 - 1.8 kg

1.5 - 1.9 kg

1.5 - 1.8 kg

DTR180

DBS180

18v LXT® Cordless Die Grinder

18v LXT® Brushless Cordless Rebar Tying Tool

18v LXT® Brushless Variable Speed Belt Sander

DGD800

DGD801

18v LXT® Cordless Die Grinder

Die Grinder/ Belt Sander Guns

Delivers 25,000 RPM Grinding

6,400 Ties per charge using 6.0ah

Grinding Wheel

Collet : 3 mm - 8 mm

ø 0.8 mm wire reels

Sound Pressure Level

Wheel Diameter: 38mm

D10,D13 & D16

No Load Speed

26,000

25,000

Tying speed: 0.8 Seconds per Tie

Dimensions (L x W x H)

402x82x118 mm

307x82x118 mm

Dimensions:304x93x318 mm

Net weight

1.7 - 2.2 kg

1.5 - 2 kg

2.3 - 2.6 kg

DCF300

Cordless Fans

DCF102

DCF203

18V 330mm (13”) Jobsite Fan 18V 180mm (7”) Jobsite Fan

18V 235mm (9-1/4”) Jobsite Fan

Up to 6.7 Hours of Continuous Run Time on a Single BL1860B

Up to 21.2 Hours of Continuous Run Time on a 1 x 6.0Ah (low set.)

Up to 19.5 Hours of Continuous Run Time on a 1 x 6.0Ah (low set.)

Fan diameter

330mm (13”)

180mm (7-1/8”)

235 mm (9-1/4”)

Max. Air Volume

4.6m³/min

8.2m³/min

Max. wind velocity

220m/min

180m/min

190m/min

Overall Length

315mm

185mm

333mm

Skin Weight

4.1kg

1.4 kg

1.9kg

www.makita.co.nz

For all other enquiries call 0800 625 482 (0800MAKITA)

Variable speed dial with belt speeds of up to 1,700m/min

Belt length: 533mm Belt Width: 6 / 9 / 13 mm Belt Speed: 600-1,700m/min Overall length: 500mm 1.8 kg

WORLD’S LARGEST 18V LITHIUM-ION SYSTEM Hard work never stops, so why should you? With Makita’s 18V LXT® system, you can take the same batteries you use at the job site and bring them home with you to tackle any indoor or outdoor task. Combine that versatility with the industry’s fastest battery charge times and you’ll never have to worry about the limits of your battery platform, or switch to another.

| 33

LXT® SITE LIGHTING DML809

LED Lights

Optional tripod lightstand (GM00002073)

DML811

DML810

DML812

Optional tripod lightstand (GM00002073)

18v Cordless/Corded LED Worklight 10,000 L

18v Cordless/Corded LED Wobble Worklight 5,500L

18v Cordless/Corded LED Worklight 3,000 L

18v Cordless LED Flashlight 1,250 L

Adapts to tripod

Dust / water-resistant construction (IP65 rated) 8.5 hours (2 x BL1860B) on low 10,000 lumens Yes (GM00002073)

Dimensions (L x W x H)

249x370x278 mm

420x420x787 mm

249x302x271 mm

313x119x115 mm

Net weight

5.7 kg

13.9 kg

4.1 kg

1.2 kg

Run Time (hrs) Lumens

Self-righting design won’t fall over even if bumped 18 hours (2 x BL1860B) on low 5,500 lumens -

DML805

LED Lights

Dust / water-resistant construction (IP65 rated) 13 hours (2 x BL1860B) on low 3,000 lumens Yes (GM00002073)

DML815

Shown with optional tripod lightstand (GM00001381)

18v LXT® Cordless/Corded 18v LXT® LED Worklight 54hrs of continous illumination/ LED Flood Light

4 modes (spot / flood / spot & flood / strobe) 10 hours (1 x BL1860B) on spot mode 1,250 lumens -

DML801

18v LXT® 12 LED Flashlight

DML807

18v LXT® LED Lantern / Flashlight

runtime on a 6.0Ah battery 54 hours (BL1860B)

20 hours (BL1860B)

43 hours (BL1860B)

160 lumens

240 lumens

300 lumens

Bulb

L.E.D. Lights Deliver Bright and Even Lighting For Large Workspaces 8.5 hours (BL1850B) 750 lumens 20 LED

Extra Bright 12 L.E.D. Flashlight Provides 240 Lumens

4x 0.5W LEDs

12 LED

Dimensions (L x W x H)

214 mm

272 mm

380x79x116 mm

414x79x155 mm

Net weight

2.3 - 2.7 kg

0.3 kg

0.61 - 0.98 kg

0.72 - 1.1 kg

Run Time (hrs) Lumens

DML808

LED Lights

ML104

ML103

Built-in USB Port

ML106

18v LXT® LED Flashlight

12v CXT® LED Flashlight

Run Time (hrs)

32 hours (BL1860B)

28 hours (BL1041B )

19 hours (BL1041B )

12 hours hours (BL1041B )

Lumens

190 lumens

100 lumens

710 lumens

190 lumens

Bulb

1 LED

20 LED

1 LED

Dimensions (L x W x H)

280x79x101 mm

87x64x54 mm

414x66x132 mm

290 x 66 x 93 mm

Net weight

0.73 - 1.09 kg

0.27 - 0.43 kg

0.61 - 0.78 kg

0.61 kg

High-luminance single LED flashlight Versatile work light providing ultrawith zoom function illumination range bright illumination

DML800

LED Lights

High-luminance single LED flashlight provides 190 lumens

DML803

THE LXT® ADVANTAGE 18v LXT® LED Flashlight

18v LXT® LED Flashlight

Run Time (hrs)

33 hours (BL1850B)

36 hours (BL1850B)

Lumens

240 lumens

270 lumens

Bulb

1 LED

Dimensions (L x W x H)

151x76x88 mm

133x81x72 mm

Net weight

0.53 - 0.91 kg

0.56 - 0.92 kg

Stationary lamp by attaching the head light section to the battery

34 |

Versatile work light providing ultrabright illumination

High luminance 2.4W single LED and wide angle lens

4 key components make up Makita’s LXT® Advantage, providing you, the user with the most advanced, durable and dependable 18V tools on the market. Our fast-charging LXT® batteries, Rapid Optimum Charger, industry leading brushless motors, and our STAR Protection Computer Controls make each and every one of our tools the best option for the job, no question.

For all other enquiries call 0800 625 482 (0800MAKITA)

Get Connected

Makita Laser Series Line-Point Laser SK103PZ

Cross Line Laser SK104Z

LASER LEVELING / DISTANCE ®

18v LXT Lithium-Ion > COMBO

Laser Level SKR200Z

Cross Line Laser SK106D / SK105D

Green Laser Series SK312GD / SK209G KITS SK106GD / SK105G

LASER ACCESSORIES

ACCURACY & VISIBILITY

High b las visibil

TK0LDG301F

Green Laser Detector

Accessories

Laser Receiver LDG-3

Laser Receiver LDX1

Large soft bag

TK0LDG301F SK312GD / SK209GD

LE00855702 SK106GD / SK105GD SK106D / SK105D

832173-9 SK106GD / SK105GD SK106D / SK105D

TK000ET03F SK106GD BL1021B x2 DC10SB Wall Mount Adapter

CORDLESS ACCURACY WITH SUPERIOR GREEN BEAM VISIBILITY Adapter for USB

Power supply cable

Hand strap set

Min tripod

Tripod 1800

Tripod 2900

ADP05

199006-4 SK312GD / SK209GD

199007-2

TK0LM1001F

TK0LM4001F

TK0LM5030F

SK209GD

Measuring range w/Wall detector mount

Leveling accuracy

±1 mm / 10 m

TK000ET03F SK312GD / SK209GD

18V LXT USB Adapter

Rechargeable Green Multi Line Laser -

Measuring range

ADP05

SK312GD

199178-5 SK106GD / SK105GD

TK0LM4001F

Wall mount

Tripod 1800 5/8 thread

Wall and ceiling adapter for universal applications with height adjustment function

±1 mm / 10 m

Self-leveling range

±2°

Laser fan angle

Horizontal : 110° Vertical : 130°

±2°

LE00855706 SK106GD / SK105GD SK106D / SK105D

Satisfy Professional's Needs Horizontal : 110° Vertical : 130°

3 Green Laser Series 3 Number of laser lines Rechargeable Green Multi Line Laser Rechargeable Green Cross Line Laser SK312GD / SK209GD Laser class 2: 515 nm class 2: 515 nm SK312GD / SK209GD SK106GDLaser / SK105GD Laser type Operating temperature Measuring range Measuring range w/ detector Leveling accuracy Self-leveling range Laser fan angle

Tripod thread

Operating temperature Tripod thread Operating Time (Approx. Hours) Dimensions (L x W x H)

Dimensions (L x W x H) Net weight

SK106GD / SK105GD

-10 - 40 °C

SK312GD ±1 mm / 10 m ±2° Horizontal : 110° Vertical : 130° 3 Laser class 2 : 515 nm -10 - 40 °C 5/8" 10-28 w/ BL1016/BL1021B : 122x110x225 mm

SK209GD ±1 mm / 10 m ±2° Horizontal : 110° Vertical : 130° 3 Laser class 2 : 515 nm -10 - 40 °C 5/8" 15-40 w/ BL1016/BL1021B : 122x110x225 mm

w/ BL1041B : 122x130x225 mm

1.5 - 1.6 kg (3.3 - 3.5 lbs)

5/8”

15-40 Hours

Number of laser lines Operating Time (Approx. Hours) Laser type

Net weight

Wall Mount Bracket

199006-4

Power Supply Cable for ADP05

-10 - 40 °CUpSK105GD to: 35 m

SK106GD Up to: 35 m Up to: 80 m ±3 mm / 10 m ±4° Horizontal: 180° Vertical: 170° 2 Laser class 2: 525 nm -10 - 50 °C 1/4" / 5/8" 7 - 20 w/ BL1016/BL1021B: 138x64x102 mm (5-7/16"x2-1/2"x4") w/ BL1041B: 157x64x102 mm (6-3/16"x2-1/2"x4") 0.69 - 0.85 kg (1.5 - 1.9 lbs.)

Up to: 80 m ±3 mm / 10 m 4±° Horizontal : 180° Vertical : 160° 2 Laser class 2 : 525 nm -10 - 50 °C 1/4" / 5/8" 7 - 20 w/ BL1016/BL1021B : 1138x64x102 mm (5-7/16"x2-1/2"x4") w/ BL1041B: 157x64x102 mm (6-3/16"x2-1/2"x4") 0.67 - 0.84 kg (1.5 - 1.9 lbs.)

5/8”

10-28 Hours

122 x 110 x 225mm High brightness green 1.5kg laser for increased Includes: Laser Viewing Glass, Shoulder Laser Viewing Glass, Shoulder visibility Includes: at bright site Strap, Storage Case Strap, Storage Case 122 x 110 x 225mm 1.5kg

Standard Equipment : Laser Viewing Glass, Shoulder Strap, Storage Case Dimensions (with carry handle in retracted position)

Rechargeable Green Multi Line Laser Horizontal / 3-Vertical lines

SK312GD

Rechargeable G

Horizontal / 2-Vertical lines

SK209GD

Cross line + Point

SK106GD

Standard Equipment : Soft bag, Adapter, Target Plate

The weight may differ depending on the attachment(s), including the battery cartridge. The lightest and heaviest combination, according to EPTA-Procedure 01/2014, are shown in the table. Items of standard equipment and specifications may vary by country or area.

Makita Corporation

SK105D

Lasers

SK106GD BL1021B x2 DC10SB Wall Mount Adapter

SK105GD

SK106D 1 2 V m a x

3-11-8 Sumiyoshi-cho, Anjo, Aichi, 446-8502 Japan

PRINTED IN JAPAN 201806

SK106GD

L i t h i u m - i o n

B a t t e r y

Tripod 2900 TK0LM5030F

Rechargeable Red Cross Line Laser

Rechargeable Green Cross Line Laser

Rechargeable Red 4-Point Combi Laser

Rechargeable Green 4-Point Combi Laser

Up to: 25 m / 80m with detector ±3 mm / 10 m ±4° Horizontal: 180° | Vertical: 160° Laser class 2: 635 nm

Up to: 35 m / 80m with detector ±3 mm / 10 m ±4° Horizontal: 180° | Vertical: 160° Laser class 2: 525 nm

Up to: 25 m / 80m with detector ±3 mm / 10 m ±4° Horizontal: 180° | Vertical: 170° Laser class 2: 635 nm

Up to: 35 m / 80m with receiver ±3 mm / 10 m ±4° Horizontal: 180° | Vertical: 170° Laser class 2: 525 nm

up to 20 Hours of Illumination* Measuring range Leveling accuracy Self-leveling range Laser fan angle

Cross Line Laser D

SK105GD Up to: 35 m Up to: 80 m ±3 mm / 10 m 4±° Horizontal : 180° Vertical : 160° 2 Laser class 2 : 525 nm -10 - 50 °C 1/4" / 5/8" 7 - 20 w/ BL1016/BL1021B : 1138x64x102 mm (5-7/16"x2-1/2"x4") w/ BL1041B: 157x64x102 mm (6-3/16"x2-1/2"x4") 0.67 - 0.84 kg (1.5 - 1.9 lbs.)

Laser type

Rechargeable Green Multi Line Laser Horizontal / 3-Vertical lines

SK312GD

up to 20 Hours of Illumination*

Rechargeable Green Cross Line Laser

Horizontal / 2-Vertical lines ADP05 SK209GD

18V LXT USB Adapter

Cross line + Point

SK106GD

SK106GD / SK105GD

Cross line

with point ( SK106GD only )

SK105GD

pter, Target Plate

hment(s), including the battery cartridge. rocedure 01/2014, are shown in the table. pecifications may vary by country or area.

LASER ACCESSORIES

Corporation

ho, Anjo, Aichi, 446-8502 Japan PRINTED IN JAPAN 201806

1 2 V m a x

L i t h i u m - i o n

199178-5

B a t t e r y

Power Supply Cable for ADP05

www.makita.co.nz

LE00855702

Green/Red Line Laser Detector

LE00870137

Wall/Ceiling Mount Bracket

For all other enquiries call 0800 625 482 (0800MAKITA)

TK0LM4001F Tripod 1800 5/8 thread

| 35

18V/12V LXT® ACCESSORIES DCW180 18v LXT® 18V LXT 20L Cooler/Warmer • Powered by 18V LXT battery, 12V car charger or AC • 5 cooling settings -18° | -10° | 0° | 5° | 10° • 2 warming settings 55° | 60° • Runtime of up to 17 hours with 2x 6.0Ah batteries in cooling mode at 5°C (normal fridge temperature) • 20L capacity allows for storage of approx. 30x cans or 15x 600mL water bottles Capacity

20 L

Cooling Capacity

-18 / -10 / 0 / 5 / 10°C (0 / 15 / 30 / 40 / 50°F)

Warming Capacity

55 / 60°C (130 / 140°F)

Dimensions (L x W x H)

623 x 341 x 371.5 mm

Net Weight

13 kg

20L (5.3gal) capacity

Long run time

Compatible with 3 power sources:

AC (through AC adapter)

500mL plastic bottles x20

Work amount on a single full battery charge (BL1860B x2)*

2L plastic bottles x4

Seven inside temperature settings Cooling capacity

-18°C [0°F]

Warming capacity

-18°C/0°F -10°C/15°F 0°C/30°F 5°C/40°F 10°C/50°F 55°C/130°F 60°C/140°F

about

DMR113

Radios

5°C [40°F]

17h

about

60°C [140°F] about

DMR108

18V LXT battery (two in parallel or one)

DMR200

18v LXT® CXT® Bluetooth 18v LXT® CXT® Bluetooth® 18v LXT® CXT® Bluetooth Sub-woofer Job Site Radio Cordless Job Site Radio Job Site Speaker ®

Woofer on the Bottom,Mid/Treble

Bluetooth and MP3 Compatible

Delivers up to 39 hours of run time

Run Time (hrs)

21 hours- 1 x 6.0ah

42 hours - 1 x 6.0ah

39 hours - 1 x 6.0ah

Speaker size

Woofer: Ø101.6 mm Side: 63.5 mm x2

Ø89 mm x 2

Woofer: Ø89 mm x 2 Tweeter: Ø36 mm

Max output

5 W x2 +25 W

7.2V:0.5Wx2 / 18V:3.5Wx2

12V:3.5W / 18V:10W

Overall lenth

268mm

262mm

211mm

Skin weight

4.9 kg

4.3 kg

2.7 kg

DCM501

Coffee Maker

DVP180

Vacuum Pump

Tool only, battery & charger not included

18v LXT® 12v CXT Li-ion Cordless Coffee Maker

18v LXT® Vacuum Pump Cordless vacuum pump for air purge on installation of room air conditioner

Can use Cafe Pod / Ground Coffee Water Tank Capacity

240 mL

Flow Rate

50 L/min

Net weight

Compatible Cafe Pod Type: 60mm 1.9 - 2.2 kg

Ultimate vacuum

20 Pa

Motor Speed

3,840 minˉ¹

Dimensions (L x W x H)

243x185x218 mm

Dimensions (L x W x H)

265x93x175 mm

Net weight

1.9 - 2.2 kg

Net weight

3.5 kg

36 |

For all other enquiries call 0800 625 482 (0800MAKITA)

12V/24V DC (cigar socket)

Li-ion Battery

5-YEAR WARRANTY

XGT 40V & 18V CORDLESS SKINS LION WARRANTY (Effective 1st April 2020) 5YR (Registered)* or 3YR (Non-registered)** *Limited to purchases that are registered online at makita.co.nz (MyMakita) within 30 days of invoice. This offer is extended to purchases made between 1st January 2020 and 31st March 2020, which must be registered by 30th April 2020 to qualify.

Get Connected

18V LXT® / 12V CXT®®CORDLESS JACKETS

18v LXT Lithium-Ion > COMBO

KITS

Heated Jackets 18v LXT® CXT® Li-Ion Heated Camo Jacket

18v LXT® CXT® Li-Ion Heated Vest

Jacket Only, Battery & Charger Not Included

DCJ201ZL DCJ201ZXL

Run Time (hrs)

DCV200ZS DCV200ZM DCV200ZL DCV200ZXL DCV200Z2XL DCV200Z3XL

w/ BL1830(B) Low /Medium / High: 17 / 9.5 / 5

Heat Zones

Total / Shoulders / Back: 2 / 1 / 1

High / Medium / Low

Heat Settings Net weight Sizes

w/ BL1850(B) Low / Medium / High: 28 / 16 / 8

Total / Chest / Back: 3 / 2 / 1

1.5 kg

0.81 - 1.2 kg

L / XL

S / M / L / XL / 2XL / 3XL

Battery not included

RUN TIME

Power source accepts Makita 18V LXT® and Compact Lithium-Ion Batteries and features a USB power port for charging portable electronic devices

Heated Jackets 12v Max CXT® Hi-vis Heated Jacket w/hood

Accessories Battery holder

12v Max CXT® Heated Vest

Jacket Only, Battery & Charger Not Included

CJ106DZM CJ106DZL CJ106DZXL Powered by Makita Li-ion Battery CJ106DZ2XL CJ106DZ3XL

CV102DZL JacketCV102DZXL Size

w/ BL1041B Low : 14 hours

w/ BL1041B Low : 14 hours Sleeve Chest

Total / Chest / Back: 5 / 2 / 3

Total / Chest / Back: 4 / 2 / 2

Heat Value

High 11.5W / Medium 7W / Low 2.3W

High 9.5W / Medium 4.5W / Low 2.3W

Net weight

1.2 kg

M / Lswitch / XL / 2XL / 3XL USB output Accessories Slide switch enables USB apparatus to operate. Brushless Fan Power Li-ion terminalBattery byUSB Makita ® JacketsBattery holder 18v LXTPowered 12V max CXTA®DC5V-2.1A Brushless 18v LXT Adaptor • Type #198732-2 • Single port Type Cordless Fan Jacket, Hi-Vis

DFJ214ZM DFJ214ZL DFJ214ZXL DFJ214Z2XL

MEDIUM LARGE X-LARGE 2X-LARGE

0.54 kg

DFJ210 / DFJ211

18v LXT® 12V max CXT® Brushless 18v LXT Adaptor 12v CXT Adaptor & Cooling #198732-2 #198731-4 Partair No. Hi-Vis Fan Jacket, Orange Power ON/OFF volume control (3stages) Filter set 198642-3

Turbo button

Filter 20pcs. set DFJ214OL DFJ214OXL DFJ214O2XL Filter set DFJ214O3XL

LARGE 198644-9

X-LARGE 2X-LARGE 3X-LARGE

When Turbo button is pushed, air flow can be increased for about 1 minute. EU Part No. (After 1 minute, the air level comes back to normal mode.)

Fan unit

Filter set

Frame 2pcs. set

Filter (non-woven) 20pcs. set

Filter 20pcs. set

198641-5 198643-1

Attaching a filter to Fan unit prevents the dust invasioncontinuous into jacket at workrun site. time Run Time (hrs) w/ BL1860B / Med / High: 33 /battery 24.5 / 13.5 Longer on a Low single full

Air Flow Settings

Turbo / High / Medium / Low Model No.

Sizes

/ High / Med / Low: 2.2 / 2.1holder / 1.7 / 1.5 m³/min Net weight Turbo Pockets Battery Part No.

Jacket size L

Net weight DFJ210 DFJ211 Fan unit Frame www.makita.co.nz DFJ310 2pcs. set

DFJ311

0.39kg (0.9 lbs.)

Filter set Filter 20pcs. set

Filter set Filter (non-woven) otherFilter enquiries call 20pcs. set

For all 0.49kg (1.1 20pcs. setlbs.) 0.52kg (1.1 lbs.)

198642-3

0.54 kg

L / XL / 2XL / 3XL18V 198644-9 EU Part No.

0.41kg (0.9 lbs.)

DFJ310 / DFJ311 DFJ213 DFJ410 / DFJ411

198641-5

DFV210

DFJ214

charge DFJ210 / DFJ211

0800 625 482 (0800MAKITA) 198643-1

Longer continuous run time on a single full battery charge

117

122

127

137

142

111

116

121

132 Chest 126

65 67 Length

131 136 Length 71 72

Chest Chest Waist

Shoulder

Sleeve

57 69

Chest

117

122

127

137

142

Waist

103 ~ 111

108 ~ 116

113 ~ 121

118 ~ 126

123 ~ 131

128 ~ 136

S 68

M 70

L 72

XL 73

2XL 74

3XL 75

Shoulder Length Sleeve Shoulder

47 66

49 68

51 70

53 71

55 72

57 73

62 44

64 46

66 48

67 50

68 52

69 54

Chest Sleeve Chest Waist Waist Length Length Shoulder Shoulder Sleeve Sleeve Chest Chest Waist Waist Length Length Shoulder Shoulder Chest Sleeve Waist Chest

117 65 103 117~ 111 111 68 65 56.5 47 58 62 126 117 87 ~ 113~ 103 111 67 68 43 47 113 62 107 117

122 67 108 122~ 116 116 70 67 59 49 60 64 131 122 92 ~ 113~ 108 116 69 70 45 49 118 64 112 122

127 69 113 127~ 121 121 72 69 61.5 51 62 66 136 127 97 ~ 113~ 113 121 71 72 47 51 123 66 117 127

132 70 118 132~ 126 126 74 70 64 53 64 67 141 132 102 ~ 133~ 118 126 72 73 49 53 128 67 122 132

137 71 123 137~ 131 131 76 71 66.5 55 66 68 146 137 107 ~ 138~ 123 131 73 74 51 55 133 68 127 137

142 72 128 142~ 136 136 78 72 69 57 68 69 151 142 112 ~ 143~ 128 136 74 75 53 57 138 69 132 142 128 ~ 136

132 Waist

XL 2XL 3XL

Waist

103 ~ 111

108 ~ 116

113 ~ 121

118 ~ 126

123 ~ 131

Length

Shoulder

56.5

61.5

66.5

Length

Sleeve

Sleeve DFJ310 Li-ion / DFJ311Battery Chest DFJ410 / DFJ411 Waist

DFV210

size Length (in cm)

M / L / XL / 2XL / 3XL

3XL

Shoulder

Length

DFJ214 DFJ212

2XL

71 Shoulder 48 50

Waist

2.2 / 2.1 / 1.7 / 1.5 m³/min

Attaching a filter to Fan unit prevents the dust invasion into jacket at work site. Air flow control panel

Brushless Fan Jackets

Air Flow

Sleeve

USB output switch

• TypeTurbo A DC5V-2.1A / High / Med / Low: • Single port • With rubber cap

Net weight Filter set Sizes

DFJ212

S M Jacket Size 66

Shoulder

Slide switchw/ enables USB apparatus BL1860B Low / Medto/operate. High: 33 / 24.5 / 13.5 When Turbo button is pushed, air flow can be increased for about 1 minute. (After 1 minute, the air level comes back to normal mode.) Turbo / High / Medium / Low

Air Flow

size

Length

DFJ213

Power ON/OFF & Cooling air volume control (3stages)

USB Power terminal

Waist

(in cm)

12v CXT Adaptor #198731-4

Length

heat controller with L.E.D. indicators

Waist

L / XL / 2XL Jacket Size

• With rubber cap

Air Flow Settings

Chest

CONVENIENCE

Length On/Off

0.5 kg

Sizes

Turbo button

Shoulder

Heat Zones

Run Time (hrs)

3 heat settings (high/medium/ low) for precise heating control

CV102DZ2XL

Run Time (hrs)

Air flow control panel

DESIGN

Continuous 62 64 run 66time68 Low / High151 136 / Medium 141 146

126

131

87 ~ 113

92 ~ 113

97 ~ 113

102 ~ 133

107 ~ 138

123

128

133

138

6.0Ah BL1860B 43 Shoulder 5.0Ah BL1850B 113 Chest 4.0Ah BL1840B 107 Waist 3.0Ah BL1830B 2.0Ah BL1820B 1.5Ah BL1815N

118 112

112 ~ 143

33 117/ 24.5 122 / 13.5 127 h132| 37 with BL1860B

OUTDOOR POWER EQUIPMENT

HEAVY DUTY METAL DECK BUILT FOR TOUGH MOWING CORDLESS BENEFITS NO PETROL NO OIL

38 | 38

I N S TA N T S TA R T S

DLM462 18Vx2 Brushless 460mm 18” Metal Deck Self-Propelled Lawn Mower

REDUCED MAINTENANCE

For all other enquiries call 0800 625 482 (0800MAKITA)

Get Connected

36V & 18V LXT® CORDLESS ®POWER EQUIPMENT

18v LXT Lithium-Ion > COMBO

Lawn Mower

KITS

DLM462

DLM531

DLM532

DLM533

Holds 4 x 18V LXT® Batteries

Operates 2 x Batteries

18v X2 LXT® Brushless 18” 18v X2 LXT® Brushless 21” 18v X2 LXT® Brushless 21” 18v X2 LXT® Brushless 21” Metal Deck Lawn Mower Metal Deck Lawn Mower Metal Deck Lawn Mower Aluminium Deck Lawn Mower Blade Type Cutting Width /Capacity Cutting Height No Load Speed (RPM) Overall Length

Lawn Mower/ Grass Shear

Self-propelled speed: 2.5-5.0 km/h Bar Blade

Bar Blade

Self-propelled speed: 2.5-5.0 km/h Bar Blade

460 mm (18”) / 60L Capacity 20-100 mm (10 Stage) 2,500-3,300 1,610mm

530mm (21”) / 70L Capacity 20-100 mm (10 Stage) 2,300-2,800 1,630mm

530mm (21”) / 70L Capacity 20-100 mm (10 Stage) 2,300-2,800 1,655mm

DLM464

DLM432

18v X2 LXT® Brushless 18” 18v X2 LXT® (36v) 17” Cordless Lawn Mower Metal Deck Lawn Mower Blade Type Cutting Width /Capacity Cutting Height No Load Speed (RPM) Overall Length

Grass Trimmers

Spindle Size Max Output No Load Speed (RPM) Max. cutting width Overall Length

Grass Trimmers/ Pruning Shear

45minutes of Runtime / 2 x 5.0ah Bar Blade

30minutes of Runtime / 2 x 5.0ah Bar Blade

460mm 18” / 60L Capacity 20-75mm 3,300 1,490mm

430 mm (17”) / 40L Capacity 20-75mm 3,600 1,490mm

DUR369A

No Load Speed (RPM) Max. cutting width Overall Length

www.makita.co.nz

18V LXT® Li-Ion Cordless 18V LXT® Li-Ion Cordless 11 cm Grass Shear 16 cm Grass Shear Up to 250 min of run time on a single Up to 220 min of run time on a single battery BL1850B charge battery BL1860B charge Cutting Width: 160 mm

Cutting Width: 110 mm

Depth Adjustment:15, 20, 25 mm Depth Adjustment: 15, 20, 25 mm Strokes Per Minute (SPM):2,500

Strokes Per Minute (SPM):2,500

337x177x131 mm

300 x 120 x 130 mm

1.4 - 1.8 kg

DUR368A

DUR369L

DUR368L

18Vx2 Brushless Loop Handle Line Trimmer

18Vx2 Brushless Bike Handle Line Trimmer

18Vx2 Brushless Loop Handle Line Trimmer

1,000W 4,600-7,000 430mm 1,846mm

550W 3,500-6,500 350mm 1,758mm

BL motor with 3 stage speed control M10 x 1.25LH

DUR189

UR201C

DUR181

BL motor with 3 stage speed control M10 x 1.25LH

DUP362

*Direct connect to PDC1200

1kW brushless motor Max Output

DUM111

18Vx2 Brushless Bike Handle Line Trimmer

18Vx2 Brushless Backpack Line Trimmer, Loop Handle Spindle Size

DUM604

M10 x 1.25LH 1,000 W 4,600 -7,000 430mm 1,760mm

18v X2 (36V) LXT® Battery 18v LXT® BL String Trimmer 18v LXT® String Trimmer Powered Pruning Shears 3-speed (High: 6,000, Medium: 5,000, Low: 4,000 RPM)

Up to 45 Minutes of Run Time with 3.0Ah Battery Under No Load

Up to 71,000 Cuts* using 2 x 5.0Ah Batteries

M8 x 1.25RH

Max Blade Opening: 54mm

240 W

230W

Max Cutting: 33 mm

4,000, -6,000 300mm 1,618mm

7,800rpm 260mm 1,433mm

Max Output:200 W

For all other enquiries call 0800 625 482 (0800MAKITA)

Overall Dimensions: 305mm Net Weight: 0.8kg

| 39

MULTI FUNCTION POWERHEAD / HEDGE TRIMMERS DUX60

Cordless Powerhead

18v X2 LXT® Brushless Multi Function Power Head High Power BL Motor Enables to Work under Heavy Load

DUX18

DMP180

Cordless Inflator

18v LXT® Brushless Multi Function Power Head

18v LXT® Cordless Inflator

High Power BL Motor Enables to Work under Heavy Load

For inflating tires of cars and bicycles, sport balls, etc.

No Load Speed (RPM)

High: 0 - 9,700

Max Air Pressure

121 PSI

Medium Low

Medium: 0 - 8,200

Low: 0 - 6,800

Air Discharge

10 L/min

Low

Max Output: 470W 983 x 318 x 175 mm

Hose Length

650mm

Dimensions

Low: 0 - 5,700 1,011x320x216 mm

Overall Length

266 mm

Weight

4.1 - 8.7 kg

2.2 kg

Skin Weight

1.4 kg

DUS054

DDG460

Earth Auger / Sprayer

DUH523

Cordless Hedge Trimmer

18V X2 LXT® Brushless Earth 18V LXT® Cordless 5L Shoulder Sprayer Auger

18v LXT®Hedge Trimmer

Powerful brushless motor produces 1,350 W max output

Two head nozzles for a wide range of spra

PowerOutput

1,350 W

Max Pressure: 0.3MPa

Blade Length

520 mm

Spindle size

Sandy Soil: 200mm Clay Soil: 150mm

Chemical Tank: 5L

No Load Speed (RPM)

1,350spm

Speed

High: 1,400 Low: 350 840 x 607 x 223mm 7.0 kg

Hose Length: 1.7m 340 x 183 x 360mm 2.1 kg

Blade opening

15mm 938mm 2.7kg

Dimensions (L x W x H) Net weight

DUH602

DUH751

Cordless Hedge Trimmer

18v LXT® Brushless 750mm Hedge Trimmer

18v LXT® Brushless 600mm Hedge Trimmer

Up to 160 Mins. of Run Time with 6.0Ah Battery on No load speed

Up to 180 Mins. of Run Time with 6.0Ah Battery on No load speed

Blade Length

750 mm

600 mm

No Load Speed (RPM)

High: 4,400

High: 4,400 Low: 2,000

Blade opening

23.5mm 1,261mm 3.9kg

21.5mm 1,121mm 3.9kg

Dimensions (L x W x H) Net weight

DUB362

Cordless Blowers

Up to 75 Minutes of Run Time with 3.0Ah Battery on Lowest Setting

Dimensions (L x W x H) Net weight

DUN600L

DUN500W

18V Brushless 600mm Loop 18V Brushless 500mm Pole handle Pole Hedge Trimmer Articulating Hedge Trimmer BL motor with 3 stage speed control

BL motor with 3 stage speed control

600 mm 520W

500 mm 520W

Strokes Per Minute (SPM) : 2,000-4,400

2,050mm 3.7kg

2,115mm 3.9kg

DUB361

DUB184

DUB186

18v X2 LXT® (36v) 6 Speed 18V Brushless Variable Brushless Blower Speed Blower

18v X2 LXT® (36v) Blower 18v LXT® Cordless Blower

Up to 29 min. of Run Time

Cruise control lever on variable speed

Makita-built Motor Produces a Maximum Air Volume of 155 CFM

Compact and lightweight for single handed operation

Air volume

13.4 m³/min

13.0 m³/min

4.4 m³/min

3.2 m³/min

Max Velocity

194.4km/h

187.6km/h

93 m/s

68 m/s

No Load Speed (RPM)

18,000 824 mm

17,000 905 mm

18,000

Overall Length

11,400 - 21,500 930 mm

Skin weight

2.8 kg

2.15 kg

1.9 kg

1.1 kg

40 |

For all other enquiries call 0800 625 482 (0800MAKITA)

861 mm

Get Connected

18V LXT® WHEEL BARROW / CHAINSAWS / BLOWER ®

18v LXT Lithium-Ion > COMBO DUB185

DUB363

Cordless Blower / Vac

KITS

18v X2 LXT® (36v) 860W Brushless Blower Vacuum

2 in 1 Blower & Vacuum Cleaner w/ Variable trigger switch + cruise control

18v LXT® Blower, Short nozzle Easily converts blower to suction tool

Max Air Volume

13.4 m³/min

12.7 m³/min

Max Air Volume: 3.2 m³/min

Max Air Velocity

65 m/s

Max Sealed Suction: 3.2 kPa

Max Air Velocity: 98 m/s

No Load Speed (RPM)

7,850 17 N

No Load Speed(RPM): 18,000

Blowing Force

7,850 14.4 N

Skin Weight

4.5 kg

Dustbag: 50L

1.6 kg

Overall Dimensions : 517mm

DUC356

Chain Saws

18v X2 LXT® (36v) 14” Brushless Chain Saw

14” Top Handle 350mm Chain Saw

DUC353

DUC356ZR

18v X2 LXT® (36v) 14” Brushless Chain Saw

Zero Emissions and Reduced Maintenance; No Need for Petrol Guide Bar length: 350mm (14”) 3/8” / .043”

For general information regarding any of our products, you can contact us at the following Makita New Zealand Limited 46 Westpoint Drive, Hobsonville PO Box 100 914 North Shore, Auckland 0745

email us on customer services @makita.co.nz

DUC353ZR

18v X2 LXT® (36v) 14” Brushless Chain Saw 14” Makita Orange

Chain Pitch / Gauge

Guide Bar length: 350mm (14”) 3/8” / .043”

14” Top Handle 350mm Orange Guide Bar length: 350mm (14”) 3/8” / .043”

Chain Speed

1,200 m/min

Overall length

270mm 4.6 kg

443mm 4.0kg

Guide Bar Length

skin weight

Chain Saws / Grease Gun

CHAIN PITCH

DUC254ZN

CHAIN PITCH

DUC254ZNR

CHAIN PITCH

Guide Bar length: 350mm (14”) 3/8” / .043”

DUC400

DUC400ZR

18v X2 LXT® Brushless 16” 400mm Chain Saw

CHAIN PITCH

18v LXT® Brushless 10” 1/4” Chain Saw

18v LXT® Brushless 10” 1/4” Chain Saw Orange

18v X2 LXT® Brushless 16” 400mm Chain Saw

Guide Bar Length

250 mm (10”)

400 mm (16”)

Chain Pitch / Gauge

1/4” / .043”

3/8” / .043”

Chain Speed

1,350 m/min 256 mm 2.7kg

1,200 m/min 443 mm 4.6kg

Torque Boost Mode

Overall length Skin weight

Material mover / Backpack

DCU180ZB

Torque Boost Mode

DCU180ZF

400mm 16” Chain Saw

PDC01Z

400mm 16” Chain Saw Orange

PDC1200

18v LXT® Brushless Power 18v LXT® Brushless Power 18V /18Vx2 LXT® Battery Portable Backpack Battery Assisted Cart with Bucket Assisted Cart with Frame Backpack Adaptor (Skin) 33.5Ah 1200Wh Only needs one battery to operate

Only needs one battery to operate

comes with 1 x 18V & 18Vx2 adaptor Compatible across 3 platforms

Max Load Capacity

w/ BL1860B x2: 120min 130 kg

18V LXT and 18V x2 LXT Yes, equivalent to IPX4

18Vx2 LXT,40Vmax, direct connection Yes, equivalent to IPX4

Traveling Speed

High: 3.5km/h

Energy Capacity: 432 Wh

Energy Capacity: 1200 Wh

Dimensions (L x W x H)

1,100 x 820x820mm 39.6kg / Bucket: 38.4kg

1,560 mm 44.8kg / Pipe frame: 43.6kg

400x195x132 mm 2.8kg Skin tool

428 x 261 x 164mm 8.8kg Skin tool

Max Run Time (min)

Net weight

www.makita.co.nz

www.makita.co.nz/p/DCU180 For all other enquiries call 0800 625 482 (0800MAKITA)

| 41

KITS

COMMERCIAL CLEANING

18v LXT® Lithium-Ion > COMBO

DVC660 18V X2 LXT® (36V) Brushless HEPA Backpack Vacuum Cleaner

42 www.makita.co.nz

For all other enquiries call 0800 625 482 (0800MAKITA)

| 42

18V & 36V LXT® COMMERCIAL CLEANING ®

18v LXT Lithium-Ion > COMBO

Vacuums

DCL281FZWX

DCL180

DCL181FZWX

KITS

DCL184

18v LXT® BL Vacuum 3 Speed 18v LXT® Compact Vacuum 18v LXT® Compact Vacuum 18v X2 LXT® (36V) Car Up to 100 Min /Low and 50min/ High settings on 1 x 6.0Ah

Up to 70 Min using 1 x 6.0Ah

Strong Suction Power for Fast Cleaning with More Run Time

Vacuum / Blower Cleaner

Capsule

800 mL

650 mL

Peak air volume

1.5 m³/min

1.4 m³/min

1.3m³/min

2 functions in one, convertible into blower Cloth/Paper dust bag:500/330mL Blowing/Cleaning:0.4/1.4 m³/min

Max sealed suction

7.0 kPa

5.3kPa

4.2kPa

5.4 kPa

Overall Dimen. /Weight

1,018 mm / 1.2 kg

481mm / 800g

476mm / 600g

365 x 138 x 202 mm / 1.6kg

Noise dB

Max: 71 dB / High: 70 dB

72.2 dB

71dB

Max/ High/Normal: 68/65/58 dB

Vacuums

Capacity Max Air Flow Max Sealed Suction Noise Level Overall. / Skin Weight

Vacuums

DVC150L

Max Air Vol: m³/min Max Suction / Noise Tank Capacity Skin weight

Vacuums / Robo Vac

DVC157L

18Vx2 15L HEPA Vacuum (Wet & Dry)

18Vx2 Brushless 15L Vacuum (Wet & Dry)

18Vx2 Brushless 15L HEPA AWS Vacuum (Dry)

AC / DC: Corded / Cordless

DC: Cordless only

Dust / Water: 15 / 12 L AC/DC: 3.6 / 2.1 m³/min AC/DC: 24 / 9 kPa AC/DC : 75 / 64 dB 366mm / 8.9kg

Dust / Water: 15 / 12 L DC: 2.1 m³/min DC: 11 kPa DC: 64 dB 366mm / 7.3kg

Dust / Water: 15 / 12 L DC: 2.4 m³/min DC: 11 kPa DC: 64 dB 366mm / 7.7kg

Hard work never stops, so why should you? With Makita’s 18V LXT® system, you can take the same batteries you use at the job site and bring them home with you to tackle any indoor or outdoor task. Combine that versatility with the industry’s fastest battery charge times and you’ll never have to worry about the limits of your battery platform, or switch to another.

DVC261ZX12

18v X2 LXT® HEPA 32mm Backpack Vacuum

18v X2 LXT® HEPA 32mm 18v X2 LXT® HEPA 38mm Backpack Vacuum Backpack Vacuum 32mm - Telescopic Pipe

38mm - Straight and Bent Pipe

140 Minutes w/ (2) BL1860B 2.2m³/min 11kPa / Max: 95W 6L 5.9Kgs

140 Minutes w/ (2) BL1860B 2.3 cubic meter per min 11kPa / Max: 69 dB High 65 dB 1.5L / Optional Dust Bag 2.0L 3.9 Kg or 4.5Kg w/ Batteries

140 Minutes w/ (2) BL1860B 36L/s 11kPa / Max: 69 dB High 65 dB 1.5L / Optional Dust Bag 2.0L 3.9 Kg or 4.5Kg w/ Batteries

DVC560

32mm - Upper and Lower Pipe

DVC750LZX1

DVC261ZX13

WORLD’S LARGEST 18V LITHIUM-ION SYSTEM

DVC660

32mm - Upper and Lower Pipe Runtime

DVC155L

DVC261ZX8

DRC200

DHW080

18v X2 LXT®(36V)Brushless 8MPa High Pressure Washer

18Vx2 LXT® Brushless Upright Vacuum Cleaner

18v LXT® Brushless Portable HEPA Vacuum

Capacity

3 stage speed control, 4 stage height Delivers up to 35 min of run time adjustment using 1 x 6.0ah (BL1860B) 5L Dust: 7 L

18v X2 LXT® (36V) Brushless Robotic Cleaner

Max Air Flow

Max Air Flow: 1.9 m³/min

Max Air Flow: 1.8 m³/min

Max Sealed Suction

12.0 kPa

Max Sealed Suction: 7.0 kPa

CleanRange: 600 m² per 120min (6.0Ah ) Max Water Flow: 380 L/h (6.3 L/min) Max running speed : 0.3 m/sec Tank : 50L

Overall Dimen. /Weight

326 x 318 x 1,146 mm / 8.3 kg 76 dB

418x251x278 mm / 4.0 kg 76 dB

Noise dB

www.makita.co.nz

460x460x180 mm / 7.8kg w/ 2 btry

Dimensions: 438 x 218 x 269 mm

Noise db: 64 dB

Net Weight: 7.1-7.7 kg

For all other enquiries call 0800 625 482 (0800MAKITA)

| 43

12V MAX CXT® LITHIUM-ION COMBO KITS / TOOLS

12V max CXT™ LITHIUM-ION

CXT™ is the next generation in 12-volt max cordless tools. 12V max CXT™ gives users a more compact solution with more comfort and more capacity. The slide style lithium-ion batteries provide superior ergonomics and comfort, and allow go-to tools like the impact driver and drills to stand up on their own for added convenience. Select 12V max CXT™ tools are equipped with efficient brushless motors for longer run time, increased power and speed, and longer tool life. For even longer run time, the expanding 12V max CXT™ platform includes an efficient 4.0Ah battery.

SUPERIOR ERGONOMICS PRECISE FEEL & CONTROL

ADVANCED LITHIUM-ION BATTERY

ULTRA-COMPACT DESIGN

EFFICIENT POWER DELIVERY

WORK WITH LESS FATIGUE

2.0 BATTERY

4.0 BATTERY

MAKITA-BUILT MOTORS* UP TO 50% LONGER MOTOR LIFE**

UPGRADED

NEW L.E.D. BATTERY CHARGE INDICATOR

NEXT GENERATION 12V max CXT™ SLIDE-STYLE LITHIUM-ION

BL1041B

BL1021B

12Vmax Cordless Brushless 2pc Drill / Impact Driver Kit

2.0

CLX205SAJ

HP332DZ - 12V MAX Brushless Hammer Driver Drill Skin TD111DZ - 12V Max Cordless 3-Mode Brushless Impact Driver Skin 2 X BL1021B-L - 12V Max Li-ion 2.0Ah Batteries DC10SB - 12V MAX Rapid Charger and Carry Case

44 |

12V CXT 2-Pc Cordless Impact Wrench & Ratchet 2.0Ah kit

2.0

CLX232NA

WR100D 12V max CXT Li-Ion Cordless Ratchet Wrench TW160D 12V max CXT Brushless Cordless 3/8” (9.5 mm) Impact Wrench 2 x 2.0Ah (BL1021B), Socket wrench adaptor 3/8” 9.5mm (191A50-3) and 1/4” 6.35mm (191A51-1) and 18v / 12v Rapid charger (DC18RE)

For all other enquiries call 0800 625 482 (0800MAKITA)

Get Connected

12V MAX CXT® ®LITHIUM-ION TOOLS

18v LXT Lithium-Ion > COMBO

CC301D

12v maxSaw, Stapler / Drills

12v max CXT™ Cordless Circular Saw High Cutting Efficiency

DA333D

ST113D

12v max CXT™ Cordless Type 13 Stapler Accepts 7-10mm length staples

KITS

DA332D

12v max CXT™ Cordless Angle Drill

12v max CXT™ Cordless Angle Drill Keyed Chuck

Steel: 10 mm / Wood: 12 mm

Steel: 10 mm / Wood: 12 mm 0 - 1,100

40% faster drilling/ 380% runtime*¹

Compact Angle Head Height & Center

Blade Diameter

85 mm

Max Cutting Capacity

90°: 25.5 mm / 45°: 16.5 mm

Planing - Width: 10 mm (3/8”)

0 - 1,100

No Load Speed (RPM)

1,600

Pin Gauge: 0.5x0.7mm

84 mm / 23.5 mm

63 mm / 23.5 mm

Dimensions (L x W x H)

313x170x125 mm

211x81x159 mm

313x68x95 mm

313x68x86 mm

Net weight

1.9 kg

Skin 1.13kg

1.2 - 1.4 kg

1.2 - 1.3 kg

Magazine Capacity: 150

TL064D

Angle Driver/ Wrench/ Drills

TL065D

DF032D

HP332D

12v max CXT™ Cordless Angle Impact Driver

12v max CXT™ Cordless Angle Impact Wrench

Capacity

M4 - M8

Capacity : M4 - M12

Compact and ergonomic design at only 124 mm long Steel / Wood: 10 / 28 mm

Brushless motor delivers 35 N·m of max torque Steel / Wood: 10 / 28 mm

Hex Shank

1/4”

Square Drive: 3/8”

6.35 mm

0.8 - 10 mm

No Load Speed (RPM)

0 - 2,000

High / Low: 0 - 1,500 / 0 - 450

High / Low: 0 - 22,500 / 0 - 6,750

Dimensions (L x W x H)

361x66x86 mm

124x66x217 mm

168x66x217 mm

Net weight

1.2 - 1.6 kg

88 - 1 kg

1.1 - 1.3 kg

60 N·m of maxi torque and 0-3,000 IPM

12v max Drills

DF332D

Compact & lightweight Impact Wrench

12v max CXT™ Brushless 12v max CXT™ Brushless 6.35 mm (1/4”) Hex Driver-Drill Hammer Driver Drill

DF333D

DF331D

DF031D

12v max CXT™ Brushless 10 mm 3/8” Driver-Drill

12v max CXT™ Cordless 10 mm 3/8” Driver Drill

12v max CXT™ Cordless 6.35 mm (1/4”) Driver Drill

Capacity

Compact and ergonomic design at only 154 mm long Steel / Wood: 10 / 28 mm

12v max CXT™ Cordless 10 mm 3/8” Driver Drill

Chuck capacity

0.8 - 10 mm

Hex Shank : 6.35 mm

No Load Speed (RPM)

High / Low: 0 - 1,500 / 0 - 450

High / Low: 0 - 1,700 / 0 - 450

Dimensions (L x W x H)

154x66x217 mm

179x66x212 mm

189x66x209 mm

157x66x209 mm

Net weight

1 - 1.2 kg

1.1 - 1.2 kg

1.1 - 1.3 kg

.94 - 1.1 kg

Cordless Drills/ Impact Driver

HP331D

Compact and Ergonomic Design at Only 179 mm Long Steel / Wood: 10 / 21 mm

Slide style battery and improved ergonomic grip Steel / Wood: 10 / 21 mm

TD111D

TD110D

Best possible ergonomic handle for drilling applications Steel / Wood: 10 / 21 mm

TD022DSE

12v max CXT™ Cordless Hammer Driver Drill

12v max CXT™ Cordless Impact Driver

7.2V Li-Ion Cordless Impact Driver w/ Case

Capacity

0-25,500 IPM for fast hammer drilling in masonry materials Steel / Wood / Masonry: 10 / 21 / 8 mm

12v max CXT™ Brushless A-Mode Impact Driver

Max Fastening Torque

Hard / Soft: 30 / 14 N·m

6.35 mm (1/4”)

No Load Speed (RPM)

High / Low: 0 - 1,700 / 0 - 450

Hard / Soft: 0 - 3,000 / 0 - 1,300

0 - 2,600

0 - 2,450

Dimensions (L x W x H)

201x66x209 mm

135x66x210 mm

153x66x204 mm

282x42x52 mm

Net weight

1.1 - 1.3 kg

0.97 - 1.1 kg

1.0 - 1.2 kg

0.55 - 0.56 kg

www.makita.co.nz

Compact and ergonomic design at only 135 mm long Machine Screw: M4 - M8 mm

Best possible ergonomic handle for screwdriving applications Machine Screw: M4 - M8 mm

For all other enquiries call 0800 625 482 (0800MAKITA)

Compact and lightweight design with precision control and high fastening Machine Screw: M3 - M8 mm

| 45

12V MAX CXT® LITHIUM-ION TOOLS TW161D

TW160D

TW141D

12v max CXT™ Brushless 1/2” Impact Wrench

12v max CXT™ Brushless 3/8” Impact Wrench

12v max CXT™ Cordless 3/8” Impact Wrench

Drive shank

12.7mm (1/2”) Square

9.5mm (3/8 “) square

12.7mm (1/2”) square

9.5mm (3/8 Inch) square

Impact rate

3,600 IPM Hard

3,200 IPM

No Load Speed (RPM)

2,400 RPM Hard

2,600 RPM

Max. fastening torque

165Nm

160Nm

145Nm

140Nm

Skin Weight

0.83kg

0.79 kg

1.1 kg

Impact Wrench / Nailer

Ultra compact design at only 150mm

Ultra compact design at only 144mm

12v max CXT™ Cordless 1/4” Impact Wrench

Compact design at only 161mm

0.80kg

HS301D

JR103D

JV101D

TW060D

12v max Impact Wrench / Saws

Compact design at only 168mm

TW140D

12v max CXT™ Cordless Top Handle Jig Saw

12v max CXT™ Cordless Recipro Saw Kit

12v max CXT™ Cordless Circular Saw

Drive Shank

6.35 (1/4”) Square

Delivers 0-2,900 strokes per minute for faster cutting Wood / Alu / Mild Steel: 65 / 4 / 2 mm

Impact Rate

3,200ipm

18 mm

13 mm

90°: 25.5 mm / 45°: 16.5 mm

No Load Speed (RPM)

2,600 RPM

0-2,900

0 - 3,300

1,500

Max. fastening torque

60Nm

232x76x196 mm

376x66x186 mm

313x170x155 mm

Skin weight

0.80kg

1.8 - 1.9 kg

1.3 - 1.5 kg

1.6 - 1.7 kg

Ultra compact design at only 161 mm

12v max Saw / Multi-Tool

JV102D

Slide Style Battery and Improved High Cutting Efficiency Ergonomic Grip Capacity: Pipe / Wood: 50 / 50 mm 85 mm

JV103D

TM30D

SD100D

12v max CXT™ Brushless Barrel Handle Jig Saw

12v max CXT™ Cordless Drywall Saw

12v max CXT™ Cordless Multi Tool

Oscillations Per Minute

Up to 2.2X Faster Cutting and 2.2X Longer Runtime*¹ Length of Stroke: 23 mm

12v max CXT™ Brushless Top Handle Jig Saw

Oscillation Angle

Wood / Alu / Mild Steel: 90 / 20 / 10 mm

Length of Stroke: 6 mm

Left / Right / Total: 1.6° / 1.6° / 3.2°

Max Output

Strokes Per Minute (SPM) 800 - 3,000

Drywall: 30 mm / Wood: 15 mm

170 W

Dimensions (L x W x H)

237x76x186 mm

237x76x206 mm

239x79x266 mm

277x65x98 mm

Net weight

1.8 - 1.9 kg

1.9 - 2.0 kg

1.4 - 1.6 kg

1.1 - 1.3 kg

CP100D

12v Multi tool / Inflator / Fans

Dust nozzle can be attached for connection to vacuum cleaner Length of Stroke: 23 mm

Compact and ergonomic design for reduced operator fatigue Strokes Per Minute: 0 - 6,000

CF101D

CF100D

Slide style battery and improved ergonomic grip 6,000 - 20,000

3-YEAR WARRANTY LITHIUM-ION POWER TOOLS

12v max CXT™ Cordless Multi-Tool

12v max CXT™ Cordless 180mm Fan

Max. Cutting Capacity

Automatic self sharpening blade system 6mm

12v max CXT™ Cordless 180 mm Auto Swing Fan

No Load Speed

300rpm

BL1021B

315

BL1021B 315

Overall Length

291mm

BL1016

240

BL1016

Voltage

12V Max

High / Med / Low: 4.6 / 3.8 / 3.0 L/min

High 180, Med 150, Low 120 m/s

Skin Weight

0.5kg

1.3kg

1.0kg

46 |

3-stage automatic timer with 1, 2, and 4 hour power-off selection BL1041B 630

Compact Size Allows Installation Even in Small Spaces BL1041B 630

For all other enquiries call 0800 625 482 (0800MAKITA)

240

Makita Power Tools & Accessories are manufactured to the highest quality standards and are thoroughly inspected and tested before leaving the factory. Makita Heated & Fan Jackets, Torches, Radios and Fans that can operate using LXT Li-ion battery are classified Li-ion Cordless power tools.

Get Connected

12V MAX CXT® ®LITHIUM-ION TOOLS

18v LXT Lithium-Ion > COMBO

MR052

Radio

12v max CXT™ Cordless Radio

UH201D

UM600D

Grass / Hedge Shear

KITS

195267-4

12v max CXT™ Cordless Grass Shear

12v max CXT™ Cordless Recipro Saw Kit

Frequency Band

FM / AM: 87.5 - 108 MHz / 522 - 1,710 kHz

Cutting Width

Slimmer handle. More runtime. High performance 160 mm

Continuous use (hours)

w/ BL1041B:30 / w/ BL1021B:15

Depth Adjustment

15, 20, 25 mm

Tooth Spacing: 26 mm

w/ BL1016:11

Strokes Per Minute (SPM)

2,500

Dimensions (L x W x H)

169x73x74 mm

Dimensions (L x W x H)

329x177x131 mm

504x120x131 mm

Net weight

0.56 - 0.72 kg

Net weight

1.3 - 1.5 kg

Compact design for high portability

CG100DZX

Caulking Gun

12v max CXT™ Cordless Caulking Gun Max Dispersing Force

Delivers an industry-leading 5,000 N of dispensing force 5,000 N

No load speed

0 - 28 mm/sec.

Holder Size

300, 600, 800 mL

Dimensions (L x W x H)

404x108x259 mm

Net weight

1.9 - 2.6 kg

Caulking Gun Accessories

196351-8

196352-6

197195-9

Holder A Set 300ml size

Holder B Set 600ml size

Holder C Set 800ml size

Max 215mm x Ø51 mm For Bonding of external wall, window frame. For Water section and Interior finishing

Max 355mm x Ø51 mm Cartridge type [ Piston A ] Sausage type [ Piston B ] Bulk sealant type [ Piston C ]

Max 295mm x Ø65 mm Cartridge type [ Piston D ] Holder for DCG180

CL121D

Vacuum / Rotary Hammer

Slide Style Battery and Improved Ergonomic Grip Blade Length: 200 mm

CL106FD

12v max Vacuum 3 speed 12v max CXT™ Vacuum Up to 67 min. of continuous use from Compact and lightweight for a single fully charged BL1041B reduced operator fatigue

HR166D

HR140D Bit Type Accepts SDS-PLUS

Bit Type Accepts SDS-PLUS

12v max CXT™ Cordless Rotary Hammer

Max. air volume (m³/min)

1.3 m³/min

600 mL

Compact and lightweight for reduced Provides up to 50% more runtime, up to 40% more speed*¹ operator fatigue 16 mm / 10 mm / 13 mm 14 mm / 10 mm / 13 mm

Max. sealed suction

4.6kPa

1.3 m³/min

0 - 4,900

0 - 4,800

Suction Power

Max: 28W

19 W

0 - 850

0 - 680

Overall Length

345mm

958x100x150 mm

246x74x179 mm

250x74x187 mm

Net weight

1.6kg

1 - 1.1 kg

1.9 - 2.6 kg

1.8 - 2.4 kg

WR100D

Ratchet Wrench/ Sander Polisher

PV301D

Blower

12v max Ratchet Wrench 12v max CXT™ Brushless 800rpm producing up to 47.5Nm Sander Polisher max fastening torque

UB100D

12v max CXT™ Variable 3 speed blower

Capacity

Standard Bolt: M5 - M12

Easy to change Hook & Loop style backing pad mainly for polishing Pad / Disc Diameter: 80/50 mm

Engine displacement

3 stage air volume settings & variable speed trigger 0 - 15,800 (RPM)

Square Drive

9.5 / 6.35 mm (3/8” / 1/4 “)

Backing Pad Diameter: 46/75 mm

Max air volume

2.6m³/min

No Load Speed (RPM)

800

Polishing/ Sanding:2,800/9,500

Max velocity

270km/h

Max Fastening Torque

47.5 N·m

Dimensions:133 x 67 x 201 mm

Dimensions (L x W x H)

508 x 155 x 202 mm

Net weight

1.0 kg

1.1 - 1.2 kg

Net weight

1.4 - 1.9 kg

www.makita.co.nz

For all other enquiries call 0800 625 482 (0800MAKITA)

| 47

40VMAX XGT®/18V LXT®/12V MAX CXT® BATTERIES AND CHARGERS 18v Lithium-Ion 18 V LXT® LITHIUM-ION 6.0Ah BATTERY Reaches Full Charge in 55 Minutes or Less BL1860B

40VMAX XGT® 4.0AH LITHIUM-ION BATTERY

(With Box) (Loose)

BL1860B-L

18 V LXT® LITHIUM-ION 5.0Ah BATTERY Reaches Full Charge in 45 Minutes or Less BL1850B

40vmax Lithium-Ion 40VMAX XGT® 5.0AH LITHIUM-ION BATTERY

(With Box) (Loose)

BL1850B-L

5.0

BATTERY

BL4050F

5.0

BATTERY

40VMAX XGT® 2.5AH LITHIUM-ION BATTERY

18 V LXT® LITHIUM-ION 4.0Ah BATTERY Reaches Full Charge in 40 Minutes or Less BL1840B

(With Box) (Loose)

BL1840B-L

4.0 BATTERY

18 V LXT LITHIUM-ION 3.0Ah BATTERY Reaches Full Charge in 30 Minutes or Less ®

BL1830B

(With Box) (Loose)

BL1830B-L

3.0 BATTERY

18 V LXT® LITHIUM-ION 1.5Ah BATTERY Reaches Full Charge in 15 Minutes or Less BL1815N

(With Box) (Loose)

BL1815N-L

1.5

BATTERY

7.2-18V STANDARD CHARGER Compatible with all 14.4V - 18V LXT batteries

BL4025

2.5 BATTERY

40VMAX XGT® 2.0AH LITHIUM-ION BATTERY

Charges Makita 40vmax Lithium-Ion Battery (BL4025) in 28 Minutes DC40RA BATTERY ADAPTER FOR 40VMAX XGT® BATTERIES

BL4020

2.0 BATTERY

DC10WB

14.4v Lithium-Ion 14.4V 3.0AH LITHIUM-ION 22 BATTERY 22 Minutes Fast Charging BL1430B-L

14.4V 6.0AHLITHIUM-ION BATTERY

3.0 BATTERY

BL1460A

6.0

Charges 2 Batteries Simultaneously

BL1041B

DC18RD

4.0 BATTERY

• Charges 4 batt. at a time

18V LXT /12V CXT DUAL VOLTAGE RAPID CHARGER Charge 18v LXT® Batteries / 12v Max CXT Batteries

BL1021B

DC18RE

2.0 BATTERY

Charge Time

18V LITHIUM-ION OPTIMUM AUTOMOTIVE CHARGER Charge 18v LXT® Batteries / Automotive 1

12V MAX CXT™ LITHIUM-ION CHARGER Charges 12V max CXT™ Slide-Style Batteries

12V MAX CXT™ LI-ION 2.0AH BATTERY Slide-Style Battery

18V LITHIUM-ION 4-PORT CHARGER Will Accommodate Up To 4 Batteries

Not a rapid charger

10.8V 1.3AH LITHIUM-ION BATTERY Pod-Style Battery BL1013-L

Adapter for USB LXT 18V/14.4V USB ADAPTER

10.8V USB ADAPTER

BL7010-L ADP05

DC10WB ADP06

DC10WD LITHIUM-ION CHARGER Charges 7.2V to 12V max • Also charges 10.8V Lithium-Ion batteries

DC10WB

7.2v Lithium-Ion

7.2V LI-ION BATTERY BL7010-L BL7015

For all other enquiries call 0800 625 482 (0800MAKITA)

BATTERY

12V MAX CXT™ LI-ION 4.0AH BATTERY Slide-Style Battery

18V LI-ION DUAL RAPID OPTIMUM CHARGER

48 |

12v max Lithium-Ion

18V LITHIUM-ION RAPID OPTIMUM CHARGER Rapid Charging DC18RC

DC18SE

4.0 BATTERY

• Adapts to DC40RA for rapid charging of 18V LXT® batteries

DC18SD

DC18SF

BL4040 40VMAX XGT® CHARGER

LITHIUM-ION CHARGER Charges 7.2V to 10.8V max DC10WB DC10WA Get Connected

18v LXT® Lithium-Ion > COMBO

KITS

MEASURING / DEMOLITION DHR400 18Vx2 Cordless Brushless Rotary Hammer - SDS-Max

www.makita.co.nz

For all other enquiries call 0800 625 482 (0800MAKITA)

| 49 49

MEASURING / DEMOLITION / ROTARY HAMMERS LD030P

LD050P

LD080P

LD080PI

Laser Distance Measure, 30m

Laser Distance Measure, 50m

Laser Distance Measure, 80m

Laser Distance Measure, Inclination Sensor, 80m

Power Supply

635nm, class II 0.2-30 m +/- 2 mm 2 AA Batteries

635nm, class II 0.05-50 m +/- 2 mm 2 AAA Batteries

635nm, class II 0.05-80 m +/- 1.5 mm 2 AAA Batteries

Net Weight

0.1 kg

0.14 kg

Lasers

Measuring Accuracy & Productivity Laser Diode Working Range Line accuracy

With inclination sensor

SKR200Z

Lasers

Measuring Accuracy & Productivity

With inclination sensor

MEASURING ACCURACY AND PRODUCTIVITY

VERSATILITY

Multiple measurement functions for increased versatility of applications

ACCURACY Achieve the accuracy of a pro with top-class accuracy for maximum precision

Self-Leveling Horizontal/ Vertical Cross Line laser

CAPACITY

best-in-class visibility in ambient light Laser Diode Working Range Line accuracy Power Supply Net Weight

Ample operating range for long distance capacity

635nm, class II Rotating beam (diameter) : 200 m +/- 3mm @ 10m 2 AA Batteries 1.6 kg

DURABILITY Dust and water resistance with IP 54 rating for increased durability

HM1812X4

Demolition Hammers

LD080P

HM1812

HM1317C

LD050P

HM1307C

28.6mm Hex

30 mm Hex

72.8 J AVT® Electric Breaker Kit with Trolley

72.8 J AVT® Electric Breaker

25.0 J AVT® Electric Breaker 25.5 J Electric Breaker

Hits Like Air Without the Vibration

Anti-Vibration Technology for 2X Less Vibration

Electronic Controller for Operator Convenience

Blows Per Minute

870 BPM

730 - 1,450

Impact Energy

730 - 1,450

72.8 J

25.0J

Noise Level

25.5 J

107 dB(A)

101 dB(A)

Net weight

101 dB(A)

31.3 kg

17 kg

Continuous rating input

17 kg

2,000W

1,510W

HM1213C

Demolition Hammers Accepts SDS-MAX

HM1214C Accepts SDS-MAX

30 mm Hex

HM0871C

1,510W

HM1203C

Accepts SDS-MAX

19.1 J Demolition Hammer

18.6 J AVT® Demolition Hammer

19.9 J AVT® Demolition Hammer

8.1 J AVT® Demolition Hammer

Extra-low vibration performance

Soft start for smooth start-ups

Compact power with less weight

Blows Per Minute

950 - 1,900

1,100 - 2,650

950 - 1,900

Impact Energy

18.6 J

19.9 J

8.1 J

19.1 J

Noise Level

95 dB(A)

98 dB(A)

97 dB(A)

95 dB(A)

Net weight

10.8 kg

12.3 kg

5.6 - 5.8 kg

9.7 kg

Continuous rating input

1,510W

1,110W

1,510W

50 |

For all other enquiries call 0800 625 482 (0800MAKITA)

Compact Power with Less Weight

Get Connected

DEMOLITION / ROTARY HAMMERS 18v LXT® Lithium-Ion > COMBO KITS HR5212C

Rotary Hammer

HR3210FCT

HR321OC

HR4013C

Accepts SDS-MAX

Accepts SDS Plus

20 J Advanced AVT® Rotary Hammer

8.0 J Advanced AVT® Rotary Hammer

5.0 J AVT® Rotary Hammer 5.0 J AVT® Rotary Hammer

AVT for Significantly Less Vibration

Anti-Vibration Technology for 2X Less Vibration

from SDS-plus to 3 jaw chuck literally in a second

Accepts SDS Plus

Blows Per Minute

Advanced AVT for Significantly Less Vibration 1,100 - 2,250 BPM

1,450 - 2,900 BPM

1,650 - 3,300

Impact Energy

20 J

4.9 J

Noise Level

109 dB(A)

103 dB(A)

100 dB(A)

99 dB(A)

Net weight

11.9 - 12.0 kg

6.8 - 6.9 kg

5.2 - 5.6 kg

5.4 - 5.6 kg

Continuous rating input

1,510W

1,100W

5.0 m

850W

Rotary Hammer

HR3011FCWJ

HR3200C

HR2811F

HR2661

Accepts SDS Plus

3.9 J Rotary Hammer

5.1 J Rotary Hammer

2.8 J Combination Hammer 2.2 J AVT® Combination Depth gauge for increased drilling Hammer w/ HEPA Dust Coll. consistency

D-shaped” handle with soft grip

Blows Per Minute

0 - 4,500

1,650 - 3,300

0 - 4,500

Impact Energy

3.9 J

5.1 J

2.8 J

2.9 J

Noise Level

105 dB(A)

100 dB(A)

101 dB(A)

Net weight

4.4 - 4.8 kg

4.8 - 5.2 kg

3.5 - 3.9 kg

3.3 - 4.4 kg

Continuous rating input

1,050W

850W

800W

Advanced AVT for Significantly Less Vibration

HR2650

Rotary Hammer Accepts SDS Plus

from SDS-plus to 3 jaw chuck literally in a second

HR2651

Accepts SDS Plus

800W

SDS-PLUS NEMESIS II

NEMESIS II

Accepts SDS Plus

• Lifetime on rebar up to 50% higher

2.2 J Combination Hammer 2.2 J AVT® Combination with HEPA Self Dust Collection Hammer w/ HEPA Dust Coll. Built-on HEPA Vacuum

AVT and Built-on HEPA Vacuum

Blows Per Minute

0 - 4,600

Impact Energy

2.2 J

2.9 J

Noise Level

102 dB(A)

103 dB(A)

Net weight

3.0 - 4.1 kg

3.1 - 4.2 kg

Continuous rating input

800W

DHK180

Power Scraper

ACCESSORIES 198362-9 Dust Cup

To suit the DHR171/ HR166

3.1 J Brushless Power Scraper, SDS-PLUS Bits Anti-vibration housing and AVT Shank Type

SDS-PLUS Bits

Blows per minute

3,200

Joules

3.1 J

Max Output

470W

Net weight

3.3kg

www.makita.co.nz

• Rebar chamfer reduces shock in reinforcement strikes • Wearing mark; indicator for evaluating the dimensional stability of the anchor holes • Innovated flute geometry for faster drilling • One piece solid carbide tip (5-10 mm) • No seizing up on hitting reinforcing steel • Ensures precision drill holes • Drills more precisely • Low vibration and high fracture resistance

417911-6

Grp Base 15

921923-8 HEX BOLT M8x120

SEE PG. 85-86

www.makita.co.nz/accessories/search/nemesis

For all other enquiries call 0800 625 482 (0800MAKITA)

| 51

MEASURING / DEMOLITION / ROTARY HAMMERS HK1820

Demolition Hammers Accepts SDS-MAX

3.1 J Power Scraper, SDS-PLUS Bits Compact and lightweight Continuous rating input

550W

Impact Energy

3.1 J

Noise Level

HP1630KSP

Hammer Drill CARBIDE & DEMOLITION STEEL

SDS-PLUS

SDS-MAX

28.6mm Hex

3/4" Hex

13mm Hammer Drill with Case and 9 Piece Bit Set

Powerful 710 W motor w/ 0-3,200 RPM Continuous rating input

710W

Impacts Per Minute (IPM)

0 - 48,000

95 dB(A)

No Load Speed (RPM)

0 - 3,200

Net weight

3.4 kg

Net weight

2.1 kg

Continuous rating input

550W

Power supply cord

2.0 m

HP2070F

Hammer Drills

HP2050H

HP2051FH

HP2010N

20 mm Hammer Drill

Continuous rating input

1,010W

720W

750W

Impacts Per Minute (IPM)

0 - 24,000 / 0 - 58,000 BPM

0 - 18,000 / 0 - 46,000 BPM

No Load Speed (RPM)

High: 0-58,000

High: 0-2,900

High: 0-2,300

Net weight

2.5 kg

Power supply cord

2.5m

2.9 kg 2.5m

“Hammering with Rotation” or “Rotation Only”

4114S

Angle Cutter

“Hammering with Rotation” or “Rotation Only”

Industrial Metal Gear Housing for Durability

EK8100

Power Cutters

355 mm SJS™ Angle Cutter

Capacity Performance 405 mm Power Cutter with 81 cc Engine

Built in Dust Port for Reduced Dust and Debris when Connected to a Vacuum Continuous rating input

Engine

81 cc

Engine ( Max Power)

4.2 kW

No Load Speed

3,820 RPM

Net weight

2,400W Max cutting : 125 mm 3,500 10.8 kg

Max Cutting Depth

147 mm

Power supply cord

2.5 m

Net weight

10.6 kg

Capacity No Load Speed (RPM)

EK7651H

Power Cutters

76 cc MM4® 4-Stroke Power Cutter

For general information regarding any of our products, you can contact us at the following Makita New Zealand Limited 46 Westpoint Drive, Hobsonville PO Box 100 914 North Shore, Auckland 0745

email us on customer services @makita.co.nz

EK7301WS

DK0040T

EK6101

76 cc Power Cutter 5.0 Kit 73 cc 2-stroke Power Cutter 61 cc Power Cutter Outstanding engine power of 3.0kW Powerful Performance with MM4 - No fuel and oil mixing required 73 cc. Engine

Compact Performance at Only 8.8 kg with 61 cc Engine

Engine

No Oil Mixing Prevents Piston Seizure Due to Improper Mixing 75.6 mL

Power Cutter Kit Includes:

73 mL

61 cc

Engine ( Max Power)

3.0 kW

EK7651H , DGA504Z

3.8 kW

3.2 kW

No Load Speed

4,300

(1) 5.0Ah Battery (BL1850B)

4,300

4,400 RPM

Max Cutting Depth

122 mm

(1) Rapid Charger (DC18RC)

122 mm

130 mm

Net weight

14.2 kg

- kg

10.1 kg

8.8 kg

52 |

For all other enquiries call 0800 625 482 (0800MAKITA)

Get Connected

CONCRETE SAWS / DRILLS

18v LXT® Lithium-Ion > COMBO 4107RH

Concrete Saw

4100NH2

4101RH

KITS

DIAMOND BLADES SEGMENTED RIM • Segmented slots help deliver a faster cooler cut in multiple applications • Advanced design for improved cutting and long life

180 mm Masonry Saw Quick and clean cutting, Waterproof construction

125 mm Masonry Saw

110 mm Masonry Saw

For Wet Cutting of Tile, Masonry, Concrete and More

Powerful cutting in stone, masonry, tile, concrete & more

Blade Diametre

180 mm

125 mm

Max 125 mm

Continuous rating input

1,400W 5,000 90°: 60mm 6.8 kg

860W 12,000 90°: 41.5 mm / 45°: 26 mm 3 kg

1,400W 12,200 w/ 110mm 90°: 32.5 mm 3 kg

No Load Speed Max Cutting Depth Net weight

6411

Drills

6413

TURBO RIM • Constant contact with material delivers a smoother finish than segmented blades

CONTINUOUS •Designed for making cuts in hard materials • Use for making wet cuts

6408

DP4010K

3/8” Drill / Keyed Chuck

3/8” Drill / Keyless Chuck 3/8” Drill / Keyless Chuck 1/2” 2 Speed Reversing Drill

Compact and lightweight, yet with enough power

General Purpose Drill Featuring Compact And Lightweight Design

Keyless chuck for fast and easy bit installation and removal

Aluminum gear housing provides high quality and toughness

Capacity

Steel 10 mm / Wood 25 mm

Steel Hi: 8 mm / Wood Hi:25 mm

Continuous rating input

450W

530W

720W

No Load Speed

3,400

0-2,500

High: 0 - 2,900 / Low: 0 - 1,200

Net weight

1.3 kg 2.0 m

1.5 kg 2.5 m

2.5 kg 2.5 m

Power supply cord

6300-4

Drills

DP4002K

DP4000K

DP2010

1/2” 4-Speed Drill

1/2” Drill / Keyed Chuck

Rear D-handle and side grip for controlled drilling

Lightweight aluminum gear housing for durability

Ergonomically designed rubberised grips for comfortable operation

Capacity

Steel 13 mm / Wood 30 mm

Steel 13 mm / Wood 38 mm

Steel 6.5 mm / Wood 15 mm

Continuous rating input

650W

750W

370W

No Load Speed

650 / 700 / 1,250 / 1,500

0-700

0-950

0-4,200

Net weight

2.9 kg 2.5 m

2.7 kg 2.5 m

2.5 kg 2.5 m

1.0 kg 2.0 m

Power supply cord

DA3010F

Angle Drills

DA6301

1/4” High Speed Drill With 4,200 RPM high speed rotation, ideal for fast drilling of small holes

DS4012 CONTACT US

3/8” Angle Drill

1/2” Angle Drill

Light Up Your Drilling Surface with L.E.D. Power

All-ball and needle bearing construction for longer tool life

Capacity

Steel 10 mm / Wood 25 mm

Steel 13 mm / Wood 25 mm

Continuous rating input

810W High: 1,200 / Low: 300

750W

No Load Speed

450W 0-2,400

Net weight

1.6 kg

4.3 kg

2.8 kg

Power supply cord

2.5 m

6.2 lbs.

www.makita.co.nz

1/2” D- Handle Drill

Powerful 750W Motor with Variable Speed for Improved Mixing and Drilling Performance Steel 13mm / Wood 36mm 0-600

For all other enquiries call 0800 625 482 (0800MAKITA)

For general information regarding any of our products, you can contact us at the following Makita New Zealand Limited 46 Westpoint Drive, Hobsonville PO Box 100 914 North Shore, Auckland 0745

Any questions, give us a call

0800 625 482 | 53

SCREWDRIVERS / IMPACT WRENCH / IMPACT DRIVER 6807

Screwdrivers

FS2500

2,500 RPM SCREWDRIVERS

2,500RPM

2,200 RPM 2-Speed Screwdriver

2,500 RPM Screwdriver

Continuous rating input

500W

570W6,000RPM

Driving Shank (Hex)

6.35 mm (1/4”)

No Load Speed (RPM)

High: 0-2,200 / Low: 0-1,000

0 - 2,500

Net weight

2.1 - 2.2 kg

1.5 kg

Power supply cord

2.5 m

POWERFUL 6.0 AMP MOTOR FOR CONTINUOUS HEAVY-DUTY WORK

4,000RPM Precision Balance With Less Weight

COMFORT

Quiet action: only 79dB

FS2700

Screwdrivers

FS2300

Ergonomic Grip Design for increased user comfort

POWER 2,500RPM

2,500 RPM Screwdriver

Continuous rating input

570W6,000RPM

6,000RPM 570W

Driving Shank (Hex)

6.35 mm (1/4”)

No Load Speed (RPM)

0 - 2,500

Net weight

1.8 kg

1.6 kg

Power supply cord

2.5 m

4,000RPM 6 stage adjustable torque adjustment

VISIBILITY

4,000RPM Silent clutch for quiet operation

6-Stage Torque Adjustment for a wide range of applications (FS2701)

Built-in L.E.D. Light illuminates the work surface

LIGHTWEIGHT & ERGONOMIC

2.5 m

6846

6843

GET 3,000 RPM Auto Feed Screwdriver

6,000 RPM Auto Feed Screwdriver

Continuous rating input

470W

Driving Shank (Hex)

6.35 mm (1/4”)

No Load Speed (RPM)

3,000

6,000

Net weight

2.0 - 2.7 kg

Power supply cord

2.5 m

D-handle design for driving control

FS4300

Screwdrivers

Adjustable Depth Locator delivers consistent screw depth with “Sure-Lock”feature (FS2500)

2,500RPM

2,500 RPM Screwdriver

Screwdrivers

RELIABILITY

High torque for driving screws up to 55 mm

SERVICE

When servicing or repairing your Makita power tool, use one of the recommended Authorised Makita Service Centres throughout New Zealand. Makita Service for all power tools and OPE Service for the outdoor power equipment range.

Locate Nearest Service Center ONLINE:

www.makita.co.nz/service/

6906

Impact Wrenches / Impact Driver

CHOOSE ONLY GENUINE

MAKITA® PARTS & ACCESSORIES

2,500RPM

4,000RPM

4,000 RPM Drywall 6,000RPM Screwdriver with LED

3/4” Impact Wrench w/ Friction Ring Anvil

Features 2.5m Cord

Max Torque of 588 N·m

Continuous rating input

570W

Hex Shank

19 mm (3/4”)

Driving Shank (Hex)

6.35 mm (1/4”)

No Load Speed (RPM)

1,700

No Load Speed (RPM)

0-4,000

Maximum Torque

588 N·m

Net weight

1.4 kg

Net weight

5.6 kg

Power supply cord

2.5 m

Power supply cord

2.5 m

54 |

For all other enquiries call 0800 625 482 (0800MAKITA)

"Knock-off" Makita® LithiumIon batteries may burst causing fires, personal injuries or property damage

Get Connected

IMPACT WRENCH®/ ANGLE GRINDERS

18v LXT Lithium-Ion > COMBO

TW1000

Impact Wrenches

TW0200

TW0350

MORE PERFORMANCE TORQUE

Max torque of 1,000Nm.

1/2” Impact Wrench w/ Friction Ring Anvil Max torque of 200 N·m 12.7 mm (1/2”)

12.7 mm (1/2”)

No Load Speed (RPM)

1,700

0 - 2,200

2,000

Maximum Torque

1,000 N·m

200 N·m

350 N·m

Net weight

8.4 kg

2.1 kg

3 kg

Power supply cord

2.5 m

9565CV

Angle Grinder

5” SJS™Paddle Switch Angle Grinder

2.1 kg

3.1 kg

COMP.

MAKITA

COMP.

HUGE TORQUE

Max torque of 350 N·m

25.4mm (1”)

325 Nm

MAKITA

Powerful 200 N·m of torque and weighs only 2.1 kg for the most demanding job

1/2” Impact Wrench w/ Friction Ring Anvil

Hex Shank

300 250

Makita

200

Competitor

150 100 50 0

0.5 1.0 1.5 2.0 2.5 3.0 3.5 4.0 4.5

With Makita’s 20 ft.lbs. greater torque it only takes 3 seconds to seat a 3/4'' nut

Models: TW0350/TW0200

9557NB

GA7060

GA7061R

4½” Angle Grinder

7” Angle Grinder

AC/DC Switch for Use with Alternative Power Source

2,200 W motor delivers Delivers 8,500 RPM

Developed for heavy duty applications such as foundry grinding

115 mm

180 mm

840W

2,200W

Continuous rating input

Electronic Controller for Increased Durability 125 mm 1,400W

No Load Speed

2,800-12,000

11,000

8,500

Net weight

2.4 - 3.5 kg

1.7 - 2.1 kg

5.38 - 5.89 kg

5.57 - 6.08 kg

Power supply cord

2.5 m

9556NB

Angle Grinder

WEIGHT

350 Nm

Torque Fastening in lbs

1” Impact Wrench w/ Friction Ring Anvil

Engine Displacement

KITS

9558NB

9565P CONTACT US

4” Angle Grinder

5” Angle Grinder

AC/DC Switch for Use with Alternative Power Source

Engine Displacement

100 mm

125 mm

Continuous rating input

840W

“Tool-less” wheel guard for more convenient adjustments 125 mm 1,100W

No Load Speed

11,000

12,000

Net weight

1.6 - 2.0 kg

1.7 - 3.2 kg

2.4 - 2.7 kg

Power supply cord

2.5 m

GA4030K

9565PC

Angle Grinder

5” SJS™Paddle Switch Angle Grinder

For general information regarding any of our products, you can contact us at the following Makita New Zealand Limited 46 Westpoint Drive, Hobsonville PO Box 100 914 North Shore, Auckland 0745

Any questions, give us a call

0800 625 482

GA4040C

GA4530K

4” Angle Grinder w/ Case 4” Angle Grinder w/ Case

4½” Angle Grinder w/ Case

Refined design for reduced operator fatigue

SJS II Super Joint System II provides increased machine durability

Refined design for reduced operator fatigue

100 mm

115 mm

720W

1,400W

720W

Continuous rating input

Electronic current limiter helps protect the motor from overload 125 mm 1,400W

No Load Speed

12,000

11,000

Net weight

2.4 - 3.5 kg

1.73 - 2.02 kg

2.2 - 2.5 kg

1.89 - 2.23 kg

Power supply cord

2.5 m

Engine Displacement

www.makita.co.nz

For all other enquiries call 0800 625 482 (0800MAKITA)

| 55

ANGLE / BENCH / DIE GRINDERS GA5030K

GA5050

5” SJSII Angle Grinder, Slide 5” SJS™ Trigger Switch Switch Angle Grinder

5” Angle Grinder w/ Case

5” 1,300W Angle Grinder Refined design for reduced operator fatigue

Wheel diameter

125 mm

Continuous rating input

1,100W

Constant speed control maintains constant speed under load 125mm 1,450W

Refined design for reduced operator fatigue 720W

1,300W

No Load Speed

11,000

10,000

11,000

Net weight

2.4 - 3.5 kg

2.9 - 4.1 kg

1.92 - 3.07 kg

2.5 kg

Power supply cord

2.5 m

GA5040

Angle Grinder

SJS II Super Joint System

GA5021C

GA7040S

Angle Grinder

GA9060

LESS VIBRATION. MORE COMFORT. SUPER JOINT SYSTEM®

180mm (7”) Angle Grinder 230mm 9” Angle Grinder “Tool-less” wheel guard for more convenient adjustments

Developed for heavy duty applications such as foundry grinding

Wheel diameter

180 mm

230 mm

Continuous rating input

2,400W* continuos rating input

2,200W* continuos rating input

No Load Speed

8,500

6,600

Net weight

6.45 - 6.95 kg

5.50 - 7.86 kg

Power supply cord

2.5 m

GA9040S01

Angle Grinder / Bench Grinder

SJS™II provides a leaf spring and cam gear drive mechanism that is engineered to reduce vibration for increased operator comfort during extended use.

GA9040SK01

GB602

GB801

6” Bench Grinder

8” Bench Grinder

Push button spindle lock for operator convenience

High performance 2,400W* motor for industrial applications

Steady tool maintenance from this light, yet stable performer

Wheel diameter

230 mm

150 mm

205 mm

Continuous rating input

2,400W* continuos rating input

250W

550W

No Load Speed

6,600

2,850

Net weight

6.65 - 8.94 kg

9.31 - 9.08 kg

19.91 - 19.63 kg

Power supply cord

2.5 m

230mm (9”) Angle Grinder 9” Angle Grinder w/Case

GD0810C

Die / Straight Grinder

1/4” SJS™ Slide Switch Die Grinder

GD0800C

1/4” SJS™ Slide Switch Die Grinder

GD0600

1/4” Paddle Switch Die Grinder

GS5000

5” Straight Grinder Powerful 750W Motor Delivers More Output and 5,600 RPM

Capacity

Collet : 8 mm (1/4”)

3,6,8 mm or 1/8”,1/4”

Continuous rating input

750W

No Load Speed

1,800-7,000

7,000-28,000

Large Flush-Mount Paddle Switch for Easy Operation 3,6mm or 1/8”, 1/4”” 400W 25,000

Net weight

1.96 - 1.97 kg

1.88 kg

1.71 - 1.87 kg

5.0 - 5.2 kg

Power supply cord

2.5 m

SJS (Super Joint System)

56 |

Double insulated

For all other enquiries call 0800 625 482 (0800MAKITA)

Wheel Diameter: 125 mm (5”) 750W 5,600

Get Connected

18v LXT® Lithium-Ion > COMBO

KITS

POLISHING PO5000C HOOK & LOOP

5” Dual Action Random Orbit Polisher

www.makita.co.nz

For all other enquiries call 0800 625 482 (0800MAKITA)

57 | 57

SANDERS / POLISHERS / NIBBLERS / METAL SHEARS BO3710

Sanders

BO4555K

BO4565K

BO4900V

1/3 Sheet Finishing Sander

1/4 Sheet Palm Sander

Triangular Detail Sander

1/2 Sheet Finishing Sander

Connectable to Makita Vacuum cleaners without adapter

Powerful 200W motor, Low vibration, low noise

Optimum for sanding corners or tight spots with triangular base

Through-the-Pad Dust Collection System

Continuous rating input

190W

200W

330W

Pad Size

93 x 185 mm

112 x 102 mm

112 x 190 mm

115 x 229 mm

Orbits Per Minute (OPM)

11,000

14,000

4,000-10,000

Net weight

1.6 kg

1.1 kg

1.2 kg

2.9 kg

Power supply cord

2.0 m

9046

BO6050J

2.5 m

BO5041K

BO5030

BO6030

1/2 Sheet Finishing Sander 6” Random Orbit Sander

5” Random Orbit Sander

6” Random Orbit Sander

Connects directly to a dust extraction system or dust bag

Toolless pad change enables quick pad change

Pad control system for controlled pad speed upon start-up

More power for faster sanding and a smooth finish

30% less vibration than the nearest competitor

600W

750W

300W

310W

115 x 229 mm

150 mm

123 mm

150 mm

6,000

1,600 - 6,800

12,000

4,000-12,000

4,000-10,000

3.1 kg

2.6 kg

1.3 kg

1.4 kg

2.4 kg

2.5 m

2.0 m

2.5 m

PO5000C

Polisher/ Groove Cutter / NIbbler

9237CB

JN1601

CA5000XJ

5” Random Orbit Polisher

7” Variable Speed Polisher

Random Orbit with Forced Rotation or Random Orbit with Free Rotation

Ideal for maximum control during slow polish applications

Continuous rating input

900W

1,200W

1,300W

550W

Pad Size

125 mm

180 mm

Type : Cutter blade / TCT saw blade

No Load Speed (RPM)

0 - 780

0 - 3,200

2,200 - 6,400 RPM

1.6 mm 400 N/mm² Steel 2,200

Net weight

2.8 - 3.0 kg

3.2 - 3.4 kg

346x250x250 mm

1.6 kg

Power supply cord

4.0 m

2.5 m

4.7 Kg

2.0 m

3.2 mm Gauge Nibbler

Cuts aluminum composite materials 18 Ga. Stainless

JS8000

JN3201

NIbblers and Shears

118mm Aluminum Groove 1.6mm Nibbler Handles 16 Ga. Mild Steel and Cutter with Carry Case

Fiber Cement Shear

Cuts Fiber Cement Quickly While Powerful Motor For Continuous Operation In Up To 10 Gauge Mild Steel Producing Less Dust

JS1602

JS3201

1.6 mm Metal Shear

3.2 mm Metal Shear

Built-in thickness gauge for added convenience

Tight 50 mm (2”) cutting radius for greater versatility

Continuous rating input

710W

570W

380W

710W

Capacity

Max cutting : 8 mm (5/16”)

1.6 mm 400 N/mm² Steel

3.2 mm 400 N/mm² Steel

Strokes Per Minute (SPM)

3.2 mm 400 N/mm² Steel 1,300

0 - 2,500

4,000

1,600

Net weight

3.4 kg

2.2 kg

1.6 kg

3.4 kg

Power supply cord

2.5 m

58 |

For all other enquiries call 0800 625 482 (0800MAKITA)

Get Connected

18v LXT® Lithium-Ion > COMBO

KITS

SAWS LS1219L 305mm (12”)Dual‑Bevel Sliding Compound Mitre Saw with Laser www.makita.co.nz

For all other enquiries call 0800 625 482 (0800MAKITA)

59 | 59

CIRCULAR SAWS LW1400

Metalworking Saws

LC1230

4131

5007MGK

7-1/4” Magnesium Circular Saw w/ Case

14” Portable Cut-Off

12” Metal Cutting Saw

7-1/4” Metal Cutter

Carry handle for easy transport to job site

For Cutting in Pipe, Angle Iron, Conduit and More

Faster, Cleaner and More Efficient Metal Cutting

Continuous rating input

2,200W

1,750W

1,100W

1,800W

Blade Diameter

355 mm (14”)

305 mm (12”)

185 mm (7-1/4”)

No Load Speed (RPM)

3,800

1,300

3,500

5,800

Net weight

18.7 kg

19.3 kg

4.8 kg

4.6 kg

Power supply cord

2.5 m

5008MGJ

Circular Saws

8-1/4” Magnesium Circular Saw w/ Case

N5900B

9-1/4” Circular Saw

Ergonomically designed lever for Largest Cutting Capacity in its Class adjustment of cutting depth

Largest Cutting Capacity in its Class

2.5 m

5902BJ

HS0600

9-1/4” Circular Saw w/ Case

10-1/4” / 10-5/8” Magnesium Circular Saw

An industry standard for years

Enables single-pass cutting 89 mm

Continuous rating input

1,800W

2,000W

Blade Diameter

210 mm (8-1/4”)

235 mm (9-1/4”)

260 / 270 mm (10-1/4” / 10-5/8”)

No Load Speed (RPM)

5,200

4,100

4,300

Net weight

4.8 kg

6.8 kg

6.9 kg

Power supply cord

2.5 m

HS7611K

Circular Saws

HS7600

2.5 m

HS6600

7-1/4 / 7-1/2” Circular Saw

7-1/4” Circular Saw

Up to 70% faster cutting than HS7000/HS7600

Ergonomic rubberised front grip and More compact (296 mm long) and handle provide added comfort lightweight design

Continuous rating input

1,600W

1,200W

1,050W

1,700W

Blade Diameter

185 / 190 mm (7-1/4” / 7-1/2”)

185 mm (7-1/4”)

165 mm (6-1/2”)

260 / 270 mm (10-1/4 / 10-5/8”)

No Load Speed (RPM)

5,500

5,200

3,800

Net weight

3.9 kg

3.8 kg

3.5 kg

8.2 kg

Power supply cord

2.5 m

5057KB

Circular Saws

6-1/2” Circular Saw

5104

SP6000J

Optional dust nozzle is attachable for connecting to Dust Extractor

2.5 m

SG1251J

7-1/4” Circular Saw with Dust Collection

6-1/2” Plunge Cut Circular Saw with Case

5” SJS™ Wall Chaser with Case

For cutting fiber-cement materials

Electronic soft start feature

Clean, compact and comfortable

Continuous rating input

1,400W

1,300W

1,400W

Blade Diameter

185 mm (7-1/4”)

165 mm (6-1/2”)

125 mm (5”)

No Load Speed (RPM)

5,800

2,200 - 6,400

10,000

Net weight

5.1 kg

4.1 kg

4.3

Power supply cord

5.0 m

2.5 m

5.0 m

60 |

10-5/8” SJS™ Circular Saw

For all other enquiries call 0800 625 482 (0800MAKITA)

MAGNESIUM® Makita circular saws with Magnesium components are engineered for less weight with superior balance and durability

Get Connected

RECIPRO SAWS / JIG SAWS / COMPOUND MITRE SAW ®

18v LXT Lithium-Ion > COMBO

JR3051T

Recipro Saws

JR3061T

Recipro Saw

Powerful 1,200 W motor for improved performance

Built-in dust blower clears the line of cut for greater accuracy

JR3070CT

AVT® Recipro Saw Anti-Vibration Technology for 2X Less Vibration (Lock On)

Continuous rating input

1,200

1,250W

1,510W

Length of Stroke

30 mm

32 mm (1-1/4”)

Strokes Per Minute (SPM)

0 - 3,000

0 - 2,800

Net weight

3.2 kg

3.8 kg

4.6 kg

Power supply cord

2.5 m

JV0600K

Jig Saws

KITS

Up to 60% Less Vibration* *When compared to Makita hammers without AVT® Anti Vibration Technology

2.5 m

4350FCT

4351FCT

4329K

Top Handle Jig Saw w/ Case Top Handle Jig Saw

Barrel Handle Jig Saw

Barrel Handle Jig Saw w/ Case

Powerful 650 W motor and 3 orbital setting plus straight cutting

Toolless blade change system for extremely quick blade changes

Professional jig saw designed to give a superior finish

Thick blades (of 1.7 mm thickness) can be attached

Continuous rating input

650W

720W

450W

Length of Stroke

23 mm (7/8”)

26 mm (1”)

18 mm (11/16”)

Strokes Per Minute (SPM)

500 - 3,100

800 - 2,800

500 - 3,100

Net weight

2.4 kg

2.7 kg

2.6 kg

1.9 kg

Power supply cord

2.5 m

2.0 m

JIG SAW ACCESSORIES Anti-Splintering Insert

For cleaner cuts

Models Part #

4350FCT, 4351FCT,

415524-7

Rip Fence / Circular Guide For fast ripping to uniform width

Type

Models

Part #

Base Plate / Cover Plate Type

Models

Rip Fence Only 4320, 4300BV 164113-2 4301BV, 4302C Metal Base Plate 4350FCT, 4351FCT, Combination 4350FCT, 4351FCT, 193516-3 Cover Plate 4350FCT, 4351FCT,

LS1019L

Mitre Saws

Guide Rail Adaptor Set Part #

Models Part #

345238-3

417852-6

For use with guide rails

LS0714

14m 3m

193517-1 194368-5 194367-7

LS1018L

10” Dual Bevel Slide Compound Mitre Saw

7-1/2” Slide Compound Mitre Saw

10” Slide Compound Mitre Saw

Increased dust extraction rate

Large cutting capacity up to 203 mm

Less weight and compact design

Continuous rating input

1,510W

1,010W

1,430W

Blade Diameter

260 mm (10”)

190 mm (7-1/2”)

255 - 260 mm (10 - 10-1/4”)

No Load Speed (RPM)

3,200

6,000

4,300

Net weight

26.3 kg

13 kg

20.6 kg

Power supply cord

2.5 m

www.makita.co.nz

4350FCT, 4351FCT,

For all other enquiries call 0800 625 482 (0800MAKITA)

CONVENIENCE In-front bevel lock for convenient operation

| 61

COMPOUND MITRE SAWS / TABLE SAWS / SAW STANDS / PLANER LS1219L

Mitre Saws

12” Dual Bevel Slide Compound Mitre Saw

LS1040

LS1440

LS1221

10” Compound Mitre Saw 14” Mitre Saw

12” Compound Mitre Saw

Unique 2-Steel Rail Sliding System Design

Pivoting Fence for Supporting Larger Material

Clean mitre cutting up to 45 degrees, right or left

Electric brake for maximum productivity and increased operator safety

Blade Diameter

305mm (12”)

255mm (10”)

355mm (14”)

305 mm (12”)

Cutting Capacities

at 0° Max. width: 92 x 382mm

at 0° Max. width: 90.5 x 95mm

at 0° Max. width: 122 x 152mm

at 0° Max. width: 98 x 153mm

at 0° Max. height: 107 x 363mm

at 45° Max. width: 90.5 x 67mm

at 45° Max. width: 122 x 115mm

at 45° Max. width: 98 x 107mm

No Load Speed (RPM)

3,200

4,600

3,200

4,000

Net weight

29.5 kg

12.4 kg

34.2 kg

DEAWST07

Flip over Saw & Stands

DEBWST06

16.8kg

DEAWST05

198687-1 (WST01N)

Mitre saw stand WST07

Mitre saw stand WST06

Mitre saw stand WST05

Mitre Saw Work Stand

Maximum extension length: 3,830 mm

Maximum extension length: 2550mm

Maximum extension length: 2700mm

Mitre Saw Stand with Extension Arms (198687-1)

Trolley castors

Adjustable: 2

Adjustable: 5

Length

1,765mm

1,150mm

1,170mm

1,283mm

Width

750mm

750 mm

500mm

546mm

Height

860mm

850mm

800mm

838mm

Weight

18kg

15.3 kg

26.4 kg

36 kg

MLT100N

2704N

Table Saws & Thicknesser

2012NB

TABLE SAW STAND TABLE SAW STAND (10”) 255MM

260 mm (10-1/4”) Table Saw Machined saw table with high rigidity delivers accurate cutting work

• For MLT100N #JM27000300 WST-03

260mm (10-1/4”) Table Saw

12” 304mm Thicknesser

Right and rear extension table enables greater cutting capacity

TABLE SAW STAND • For 2704 # 194093-8

3mm max up to 150mm wide soft timber

Continuous rating input

1,650W

1,500W

Blade Diameter

260 mm (10-1/4”)

260mm (10-1/4”)

304mm (12”)

No Load Speed

5,200

4,300

8,500

Overall Length

715mm

726mm

483mm

Net weight

28.0kg

34.8kg

Planer

PC5010CJ

5” SJS II Concrete Planer Continuous rating input Blade Diameter No Load Speed (RPM) Net weight Power supply cord

62 |

1,650W

27.0kg

KP0810K

PC5000C

5” Concrete Planer

82mm Planer with Case

KP0800K

82mm Planer with Case

“Super Joint System II” for effective vibration absorption

Electronic Controller for Convenience Powerful with less weight

1,400W 125 mm (5”) 4,000 - 9,000 3.6 kg 4.0 m

1,400W

850W

620W

125 mm (5”)

82 mm (3-1/4”)

10,000

16,000

17,000

4 kg

3.3 kg

2.8 kg

5.0 m

2.5 m

For all other enquiries call 0800 625 482 (0800MAKITA)

High power-to-weight ratio; lightweight

Get Connected

ROUTERS / TRIMMERS / BELT SANDERS ®

18v LXT Lithium-Ion > COMBO

3601B

Routers

1/2” D Handle Router

Fine power-to-weight ratio in this well-balanced router

RP1800J

RP2301FCJ

1/2” Router with Case

KITS

RP0900K

1/4” / 3/8” Plunge Router

Soft start feature for smooth start-ups

Easy-to-read depth scales

Powerful 900W Motor Delivers 27,000 RPM

Continuous rating input

930W

2,100W

1,850W

900W

Collet Capacity

12 mm or 1/2”

6 mm, 8 mm or 1/4”, 3/8”

No Load Speed (RPM)

23,000

9,000 - 22,000

22,000

27,000

Net weight

3.6 kg

6.1 kg

6 kg

2.7 kg

Power supply cord

2.5 m

RT0700C

Routers

RT0700CX2

2.5 m

RT0700CX3

3708F

6.35mm - 1/4” Trimmer

6.35mm - 1/4” Trimmer Kit

6.35mm - 1/4” Trimmer Kit 1/4” Trimmer 4 different base assemblies for added versatility

Quiet and powerful 440 W motor for improved performance

Continuous rating input

710W

440W

Collet Capacity

6 mm, 8 mm or 1/4”, 3/8”

6 mm or 1/4”

No Load Speed (RPM)

10,000 - 30,000

35,000

Net weight

1.8 - 2.7 kg

1.3 kg

Power supply cord

2.5 m

Dust extraction nozzle, spanner, template Chamfer base (198985-3), Plunge guide, collet cone, straight guide base (195563-0), Trimmer base

3709

Routers

PJ7000

7104L

ACCESSORIES Plunge Base Assembly Part # 195563-0

1/4” Fixed Base Trimmer Super smooth rack-and-pinion depth adjustment

4” Plate Joiner

Super smooth rack-and-pinion depth adjustment

Chain Mortiser

Large adjustable vise for attaching firmly onto logs

Continuous rating input

530W

701W

1,140W

Collet Capacity

6 mm or 1/4”

100 mm (4”)

130 mm (5-1/8”) / 155 mm (6-1/8”)

No Load Speed (RPM)

30,000

11,000

3,200

Net weight

1.5 kg

2.8 kg

17.8 - 18.2 kg

Power supply cord

2.5 m

9924DB

Belt Sanders

Part # 198985-3 Part # 195562-2

2.5 m

9401

Part # 196612-6

Part # 196924-7

76 mm x 610 mm Belt Sander 100 mm x 610 mm Belt Sander Low Profile Balanced Design

Perfect for flush-along-side sanding as well as open areas

Continuous rating input

850W

940W

Belt Size

76 x 610, 620 mm

100 x 610 mm

Belt Speed

400 m/min

350 m/min

Net weight

4.8 kg

7.2 kg

Power supply cord

2.5 m

www.makita.co.nz

OPE TOOLS

2-YEAR WARRANTY CORDED, PNEUMATIC, PETROL, LASER TOOLS

For all other enquiries call 0800 625 482 (0800MAKITA)

Part # 195559-1 Part # 122703-7

| 63

BELT SANDERS / MULTI-TOOL / BLOWER / HEAT GUN 9403

Belt Sanders

9404

9031

9032

100 x 610mm Belt Sander

100 x 610mm Belt Sander 30 x533mm Belt Sander

9 x 533mm Speed Belt Sander

Innovative design for sanding flush to wall with nose and side of sander

Auto-tracking belt system tracks belt without adjustment

Versatile for use on wood, metal, and fiberglass materials

Versatile for use on both wood and steel materials

Continuous rating input

1,200W

1,010W

550W

500W

Belt Size

100 x 610 mm

30 x 533 mm

9 x 533 mm

Belt Speed

500 m/min

210-440 m/min

200 - 1,000 m/min

300 - 1,700 m/min

Net weight

5.7 kg

4.8 kg

2.1 kg

1.6 kg

Power supply cord

2.5 m

SA7000C

Angle Sanders

Continuous rating input

TM3000CX7

Multi-Tools

TM3010CX4

7” Angle Sander

Multi-Tool Kit

Tool-less Multi-Tool Kit

Powerful motor delivers outstanding performance for industrial use

Clamp system and adapter fit most competitive accessories

Toolless clamp system for fast accessory installation

1,600W 180 mm

Continuous rating input

320W

Abrasive Disc Size

Oscillation Angle

3.2°

No Load Speed (RPM)

0-4,000

Strokes Per Minute (SPM)

6,000-20,000

Net weight

3.6 kg

Net weight

1.4 - 1.5 kg

1.6 - 1.7 kg

Power supply cord

2.5 m

Power supply cord

2.5 m

UB1103

Blower

HG6030K

Heat Gun

ACCESSORIES PR00000028 Glass protection nozzle

PR00000029

Continuous rating input

Variable Speed Blower

1,800 Heat Gun with Case

Delivers a Maximum Air Speed of 4.1 m³/min Job Site Clean Up

Ergonomic soft rubber grip design for comfortable operation

600W

Air Temperature (°C)

300° - 600°

Max Air Volume

0 - 4.1 m³/min

Air Flow

50 / 250 - 300 / 250 - 600 / 500

No Load Speed (RPM)

0 - 16,000

Continuous rating input

1,800W

Net weight

1.9 - 2.2 kg

Net weight

0.57 kg

Power supply cord

2.5 m

Power supply cord

2.0 m

HG6530V

Heat Gun

HG6530VKIT

Wide-slot nozzle

PR00000030 Reflector nozzle

PR00000031 Reduction nozzle 20

HG6531CKIT PR00000032 Overlap welding nozzle

PR00000033 Solder sleeves reflector

2,000W Heat Gun

2,000W Heat Gun w/Case

3-speed blower settings for greater versatility

14 preset function for variable applications

Air Temperature (°C)

50 - 650

PR00000034

Air Flow Stage 1-3

280L/min - 280 L/min - 550 L/min

200 - 550 L/min

Continuous rating input

Reduction Welding nozzle

2,000W

Net weight

0.73 kg

0.72 kg

Power supply cord

2.0 m

64 |

For all other enquiries call 0800 625 482 (0800MAKITA)

Learn more: www.bit.do/heatgun

Get Connected

NAILERS / STAPLERS DBN600 18V LXT Li-Ion Cordless 16 Ga 64 mm (2-1/2”) Finish Nailer

NAILERS / STAPLER AF635

Nailers

AF506

AF601

AT638A

64mm Angled Finish Nailer, 15 Ga.

50mm Pneumatic Brad Nailer, 18 Ga.

38mm Narrow Crown Stapler, 18 Ga.

Operating Pressure

Anti-dry-fire mechanism prevents workpiece from damage 70 - 120 PSI

64mm Pneumatic Finish Nailer, 16 Ga.

Length

32 - 64 mm (1-1/4” - 2-1/2”)

25 - 64 mm (1” - 2-1/2”)

15 - 50 mm (5/8” - 2”)

13 - 38 mm (1/2” - 1-1/2”)

Gauge

15 Ga

16 Ga

18 Ga

Magazine Capacity

100

Net weight

1.8 kg

1.7 kg

1.3 kg

Toolless driving depth adjustment simply by turning a dial 70 - 120 PSI

DBN600

Nailers

18v LXT® Cordless 16Ga 64mm Brad Nailer

Cast and machined nose piece for precise contact 70 - 120PSI

DBN500

18v LXT® Cordless 18Ga 50mm Brad Nailer

DFN350

Conveniently located push button type air duster for continuous operation 70 - 120 PSI

1.2 kg

18v LXT® Cordless 18Ga 35mm Brad Nailer

1000+ Nails per battery using 6.0Ah* Drives a range of 18 gauge brad nails up to 4,000 Nails using 1 x 5.0Ah Magazine Capacity

110

Length

Accepts 25-64mm length nails

Accepts 15 - 50 mm length nails

Accepts 15 - 35 mm length nails

Gauge

Gauge: 16 Ga

Gauge: 18 Ga

Dimensions w/o Belt Clip

296x108x318 mm

294x97x318 mm

257x79x228 mm

Net weight

3.8 kg

3.4 - 3.8 kg

2.1 - 2.4 kg

DPT353

Nailers

COMPACT AND LIGHTWEIGHT Easy-to-see slim nose tip allows quick and easy access to a desired fastening point

DST221

Staplers

DST112

23 18v LXT® Cordless T50 type Stapler

18v LXT® Cordless 23Ga 35mm Pin Nailer

18v LXT® Cordless Stapler 3/8” R13 Type13

Accepts 10, 13, 16, 19, 22mm length Accepts 7-10mm length staples

6,400+ Nails per battery using 6.0Ah* Magazine Capacity

120

Magazine Capacity

Magazine Capacity: 98

Magazine Capacity: 150

Length

15, 18, 25, 30, 35 mm

Length

Staple Width: 10 mm Length: 10-22 mm

Planing - Width: 10 mm

Diameter

0.6 mm

Staple Gauge

0.6 x 1.2 mm

0.5x0.7mm

Dimensions w/o Belt Clip

257x79x226 mm

Dimensions

251x91x212 mm

235mm

Net weight

2.0 - 2.3 kg

Net weight

2.1 - 2.4 kg

1.1 -1.7 kg

AN611

Coil Nailer

65 mm Construction Coil Nailer

GN900SE

GF600SE

Nailers

64 mm 7.2 V Li-Ion Cordless Brad Nailer

Magazine Capacity

Drives 15º wire and plastic collated nails for added convenience 200 - 400

Magazine Capacity

Hoseless brad nailer driven by battery and fuel cell 7.2 V Li-Ion

L: (Wire-Collated Coil Nail)

32 - 65 mm

Length

15 - 64 mm (5/8” - 2-1/2”)

50-90 mm

L: (Sheet-Collated Coil Nail)

32 - 50 mm

Gauge

16 Ga

Dimensions

332x127x317 mm

Dimensions w/o Belt Clip

100

Net weight

2.3 kg

Net weight

2.2 kg

3.4 kg

66 |

For all other enquiries call 0800 625 482 (0800MAKITA)

Hoseless brad nailer driven by battery and fuel cell 7.2 V Li-Ion

Get Connected

DUST MANAGEMENT VC4210M M-Class Dust Extractor 42L(Wet/Dry) 1,200W*

67 |

For all other enquiries call 0800 625 482 (0800MAKITA)

Get Connected

DUST EXTRACTION VC2012L

Vacuum

VC3012L

VC3012M CONTACT US

15 L Dust Class L Vacuum 24 L Dust Class L Vacuum 24 L Dust Class M Vacuum Cleaner (Wet & Dry) Cleaner (Wet & Dry) Cleaner (Wet & Dry) Both wet and dry vacuum cleaning

Suitable for working w/ power tools

Continuous rating input

1,000W

1,200W

Max Sealed Suction

21.0 kPa

25.0 kPa

Tank capacity

Dust : 15 L / Water : 12 L

Dust : 24 L / Water : 19 L

Net weight

7.0 kg

11 kg

Power supply cord

Vacuum

7.5 m

DVC665

18v X2 LXT® (36V) AWS HEPA Backpack Vacuum Continuous rating input Suction Power Max. Air Volume Tank capacity Weight (with battery)

Auto-start Wireless System (AWS) Connects to Power Tool w/Bluetooth 40 Minutes w/ (2) BL1860B High 85W / Normal 45W 1.8 m³/min 6.0L 6.4 kg w/ (2) BL1860B

107418353 Fleece filter bag

107418355 Disposable bag

P-84084 Suction Hose 32mm x 4m

P-70346 Curved Hand Tube

Auto-start Wireless System (AWS) Connects to Power Tool w/Bluetooth 75 Minutes w/ (2) BL1860B High 85 / Normal 45 1.8 m³/min / Max: 69 dB High 65 dB 2.0L 4.5 kg w/ (2) BL1860B

6084 Crevice Nozzle

P-70378 Power Tool Adaptor 27mm

107418350 3 x 350mm Metal Tubes

P-81789 Floor Nozzle

P-70421 36mm Outer Sleeve (Fits P-70378 & 36mm Hose)

email us on customer services @makita.co.nz

VC4210L

18v X2 LXT® (36V) AWS HEPA Backpack Vacuum

STANDARD ACCESSORIES (VC4210L /VC4210M)

107418351 PTFE Filter Element

7.5 m

DVC265

For general information regarding any of our products, you can contact us at the following Makita New Zealand Limited 46 Westpoint Drive, Hobsonville PO Box 100 914 North Shore, Auckland 0745 New Zealand

VC4210M

42 L Dust Class L Vacuum 42 L Dust Class M Vacuum Cleaner (Wet & Dry) Cleaner (Wet & Dry) Approved for Dust Class L

Approved for Dust Class M

1,400W

25.0 kPa

Dust : 34 L / Water : 30 L

16.0 kg

7.5 m

OPTIONAL ACCESSORIES (VC4210L /VC4210M)

Variety of Makpac Connector Cases

Dust Collecting Variety of dust Guards for grinders nozzles for power tools

107413555 HEPA filter requires 107413542 holder)

107418356 Metal handle

107418357 MacPak Holder Set

107418352 Motor cooling PET filter

107418354 Reusable filter bag For MAKPAC Cases go to: Page 75

68 |

For all other enquiries call 0800 625 482 (0800MAKITA)

Get Connected

DUST EXTRACTION MADE EASY ®

18v LXT Lithium-Ion > COMBO

Model SDS PLUS DHR165 DHR165 DHR202 DHR243 HR2300X6 HR2630 HR2631FT HR2811FT SDS MAX HR4003C HR4013C HR5202C HR5212C

Attachment

193472-7

195866-2 196536-6 196858-4 196858-4

DEMOLITION HAMMERS HM0871C HM1203C 196571-4 HM1213C HM1214C HM1317C 197148-8 HM1812 197148-8 DRYWALL CUTTERS DCO180 DSD180

Cuff Size

Model

22mm

ORBITAL SANDERS BO3710 BO4555K B04565K BO4900V 9046

22mm

RANDOM ORBITAL SANDERS DBO180 BO5030 BO5041 NOT REQUIRED BO6030 BO6050J

193449-2 NOT REQUIRED

38mm

JIGSAWS DJV180 DJV181 DJV182 4329 JV0600K 4350FCT 4351FCT

417853-4 & 192349-3 126331-0 & 195546-0 126331-0 & 195546-0 192349-3 192349-3 192349-3 & 417853-4 192349-3 & 417853-4

22mm 22mm 22mm 22mm 22mm 22mm 22mm

WALL CHASER SG1251J

NOT REQUIRED

38mm

CONCRETE PLANER PC5000C

NOT REQUIRED

38mm

MULTI-TOOLS DTM50 DTM51 TM3000 TM3010

195965-0 196765-1 196022-7 196550-2

PLANERS DKP180 KP0800 KP0810/C 2012NB

451329-1 451329-1 NOT REQUIRED 193036-7

38mm

BISCUIT JOINTERS DPJ180 PJ7000

NOT REQUIRED NOT REQUIRED

22mm

75mm

CUFFS WHEN USING MAKITA VACUUMS & 28mm HOSES A 195547-8 22 MM B 195548-6 24 MM C 195545-2 38 MM

195547-8 www.makita.co.nz

195548-6

195545-2

NOT REQUIRED

22mm

22mm 24mm

NOT REQUIRED 122652-8 192518-6 192613-2 NOT REQUIRED NOT REQUIRED

22mm

194314-8 196952-2 & 195546-0 196520-1 & 195546-0 194415-2 419283-5 NOT REQUIRED 450079-5 193068-4 193068-4 197221-4 197221-4 450316-7 NOT REQUIRED NOT REQUIRED MITRE SAWS & TABLE SAWS DLS713 NOT REQUIRED DLS714 NOT REQUIRED LS1040 NOT REQUIRED LS1221 NOT REQUIRED LS1440 NOT REQUIRED LS0714 NOT REQUIRED LS1016 NOT REQUIRED LS1017/18 NOT REQUIRED LS1216 NOT REQUIRED MLT100 JM27000090 2704 419093-0 LF1000 NOT REQUIRED ANGLE CUTTER 4114S 192613-2 ANGLE GRINDERS - CUP TYPE DIAMOND WHEEL- SURFACING 195239-9 115-125 MM 195386-6 180-230 MM DUST COLLECTING WHEEL GUARD-CUTTING 115-125 MM 196845-3 180-230 MM 194044-1 OLD TYPE 230 MM 198379-2 ( coming soon) CUFFS WHEN USING VC2012L / 447L A 192349-3 22 MM B P-81745 ( VC2012L) 24 MM C P- 70378 ( 447L ) 24 MM D P-70421 38 MM

22mm 22mm

ROUTERS AND TRIMMERS RP0900 194733-8 RP1800 194934-8 RP2301FC 194934-8 RTO700C 195559-1 RTO700CX2 194733-8

Cuff Size

Attachment

BELT SANDERS 9031 9032 9924DB 9401 9403 9404 CIRCULAR SAWS DHS630 DHS680 DHS710 DSS501 DSS610 5057KB 5008MJ N5900B 5902B HS6600 HS7600 5104 SP6000J CA5000

22mm

KITS

Joint 25 192349-3

P-70378

For all other enquiries call 0800 625 482 (0800MAKITA)

22MM 24MM 24MM 22MM 22MM 38MM 38MM 38MM 38MM 24MM 24MM 38MM 24MM 24MM

38mm

38mm 38mm

38mm

P-81745

P-70421 | 69

4-STROKE PETROL POWER EQUIPMENT / PETROL BLOWER / PUMP EM3400L

2 / 4 Stroke Petrol Brushcutter

34 cc 2-Stroke Brushcutter, Loop Handle

EM2653LHN

EH7500SX

25.4 cc MM4 String Trimmer, Symmetric Loop Handle

75cm Petrol Hedge Trimmer

0.68 kW 1,150x323x212 mm 4.9 kg

Engine Displacement (cc)

Lightweight for reduced operator fatigue 34 cc

Max Output

1.15 kW

Rigid aluminum clutch case reduces The lightest 22.2cc petrol hedge trimmer with exhaust emission vibration, making more reliable 25.4 cc 750 mm 0.77 kW 22.2 mL

Fuel tank

M10 x 1.25LH

M10 x 1.25 LH

Dimensions (L x W x H)

1,815x330x270 mm

1,765x223x325 mm

Net weight

6.2 kg

5.3 kg

CORDED, PNEUMATIC, PETROL, LASER TOOLS

EBH341L

EY2650H25H

EX2650LH

EX2650LHM

4- Stroke Petrol Trimmers

OPE TOOLS

2-YEAR WARRANTY

33.5cc MM4® 4-Stroke Heavy Duty Brushcutters

25.4 cc MM4® 4-Stroke Multi Function Power head Engine Displacement (cc)

Multi-tool system with power head and versatile optional attachments 25.4 cc

25.4 cc MM4® 4-Stroke 25.4 cc MM4® 4-Stroke Multi Function Power head Telescopic Pole Pruner Multi-tool system with power head and versatile optional attachments 25.4 cc

Lightweight pole saw head for reduced operator fatigue 25.4 cc

Max Output

0.77 kW

1.07 kW

Fuel tank

0.6 L

0.65 L

Dimensions (L x W x H)

975x323x241 mm

Guide Bar Length: 255 mm

Net weight

4.6 kg

7.2 kg

EB7660TH

4- Stroke Petrol Blowers

BHX2500

4 stroke engine for Low noise and Clean exhaust emission 33.5 cc

PM7650H

EB5300TH

75.6 cc MM4® 4-Stroke Backpack Blower

75.6 cc MM4® 4-Stroke Mist Blower

52.5 cc MM4® 4-Stroke Backpack Blower

Engine Displacement (cc)

92 m/s high air speed with 20 m³/ min high volume MM4 engine 75.6 ml

24.5 cc MM4® 4-Stroke Petrol Blower

Max Air Volume

20 m³/min

10.1 m³/min

14.1 m³/min

1.8 kW

Fuel tank

1.9 L

0.52 L

1.8 L

Dimensions (L x W x H)

332x460x480 mm

350x231x368 mm

420x440x595 mm

320x450x475 mm

Net weight

11.9 - 12.1 kg

4.5 kg

13.9 kg

9.8 - 10.1 kg

Meets or exceeds EPA Phase 2 and CARB 3 exhaust regulations 24.5 mL

Efficient 4-Stroke Engine, No Fuel Mix Required 75.6 ml

Max 98 m/s high air speed with 15 m³/min high volume MM4 engine 52.5 mL

STRAIGHT PETROL, NO OIL MIXING NO OIL MIXING

REDUCED EMISSIONS

MM4® 4-stroke unleashes your potential so you can power through jobs without hesitation. No oil mixing, lower costs and reduced emissions mean less stress and more savings. Power and efficiency are on your side— how will you rule the outdoors? • Less costs with improved fuel efficiency and no 2-stroke oil • Reduced emissions for cleaner operation • Fast and easy starts with mechanical automatic engine decompression • Higher engine torque delivers the power and performance needed to meet the demands of the professional

70 |

For all other enquiries call 0800 625 482 (0800MAKITA)

Get Connected

2 STROKE CHAINSAWS

18v LXT® Lithium-Ion > COMBO EA5600FREE

2- Stroke Petrol Chainsaws

EA6100PRFE

EA7300PRZ

KITS

EA7900PRZ

56cc Chain Saw

61cc Chain Saw

73cc Chain Saw

79cc Chain Saw

Saw chain

Pitch : 3/8” or 0.325”

Pitch : .325 / 3/8”

Pitch : 3/8”

Gauge

1.3 mm (0.050”) / 1.5 mm (0.058”)

1.5 mm (0.058”)

Engine power

2.9 kW

3.4 kW

4.0 kW

4.3 kW

Dimensions (L x W x H)

430x237x297 mm

435x243x312 mm

Fuel Tank: 0.75 L

0.75 L

Net weight

5.8 kg

6.0 kg

6.3 kg

Primer pump for easy cold start

2- Stroke Petrol Chainsaws

Large fuel tank - long run time

EA4300F45C

EA3200S

Easy Start spring-assisted starter

EA3500S40B

High performance engine

EA3600F40B

43cc 15” Chain Saw

32cc Chain Saw

35cc Chain Saw

35.2cc Chain Saw

Saw chain

Pitch : 0.325” or 3/8”

Pitch : 3/8”

Gauge

1.3 mm (0.050”)

0.043”

1.1 mm (0.043”) / 1.3 mm (0.050”)

1.3 mm (0.050”)

Engine power

2.2 kW

1.35 kW

1.7 kW

Fuel Tank Capacity

0.48 L

0.4 L

0.31 L

Net weight

4.9 kg

4.2 kg

4.4 kg

4.2 kg

High performance engine

EA5600F45E

2- Stroke Petrol Chainsaws

Compact and lightweight body for better handling

High power low fuel consumption

EA7300PZ

EA6100P53E

61cc Chain Saw

73cc Chain Saw

Saw chain

Pitch : 3/8”

Pitch : 0.325 or 3/8”

Pitch : 3/8”

Gauge

1.5 mm (0.058”)

Engine power

2.9 kW

3.4 kW

4.0 kW

Fuel Tank Capacity

0.6 L

0.8 L

0.75 L

Net weight

5.8 kg

6.0 kg

6.3 kg

High performance engine

Large fuel tank - long run time

4.0 Kw professional chain saw

For general information regarding any of our products, you can contact us at the following Makita New Zealand Limited 46 Westpoint Drive, Hobsonville PO Box 100 914 North Shore, Auckland 0745

Any questions, give us a call

0800 625 482

STARTS EASY, WORKS HARD FAST EASY STARTS

HIGH POWERTO-WEIGHT RATIO

Makita® 2-stroke power equipment offers fast starts, reduced weight, and compact designs so you can take control of shaping the landscape and the future. You have the power. How will you rule the outdoors?

www.makita.co.nz

For all other enquiries call 0800 625 482 (0800MAKITA)

| 71

CORDED ELECTRIC POWER EQUIPMENT / WATER BLASTER EA7900PZ

2- Stroke Petrol Chainsaws

DCS9010/74

UC4041A

Electric Chain Saw

79cc Chain Saw

90cc Chain Saw

Saw chain

Pitch : 3/8”

Rating input

1,800W

Gauge

1.5 mm (0.058”)

Guide Bar Length

400 mm (16”)

Engine power

4.0 kW

4.9 kW

Chain speed per min

870 m

Fuel Tank Capacity

0.75 L

Dimensions (L x W x H)

455x245x200 mm

Net weight

6.3 kg

8.2 kg

Power supply cord

0.3 m

High performance engine

Large view window of oil tank allows operator to easily check oil level

UH5261

UH4861

Electric Hedge Trimmer

40cm Electric Chain Saw

Heavy Duty Timber Saw 13,500 rpm

UH6570

48cm Hedge Trimmer

52cm Hedge Trimmer

65cm Hedge Trimmer

Continuous rating input

400W

550W

Max Air Volume

Blade Length: 480mm

Blade Length: 520mm

Blade Length: 650mm

No Load Speed (RPM)

3,200

Dimensions (L x W x H)

871x194x194 mm

921x194x194 mm

1,042x223x206 mm

Net weight

3.0 kg

3.8 - 3.9 kg

Compact and lightweight design for more improved handling

HW1200

Water Blasters

Comfortable operation by ergonomically designed

HW1300

1740psi High Pressure 1885psi High Pressure Washer with Self Priming Washer with Self Priming

HW131

High Pressure Washer High durable construction

Continuous rating input

Uses up to 80% less water than a garden hose while 50X the pressure 1,800W

Max Pressure

12 MPa

13 MPa

Max Flow Rate

420 L/h

450 L/h

500 L/h

Net weight

11.0 kg

12.7 kg

33 kg

Power supply cord

5.0 m

2,300W

OPE TOOLS

2-YEAR WARRANTY CORDED, PNEUMATIC, PETROL, LASER TOOLS

POWERFUL WASHING

Uses up to 80% less water than a garden hose Easy pressure adjustment and Self-Priming function Ecofriendly for reduced water About 10 % less noise and 20% less amount of water than high mode Pressure adjustable function for easy and quick control by turning the handle

HW1200 / HW1300 ACCESSORY OPTIONS

72 |

For all other enquiries call 0800 625 482 (0800MAKITA)

Get Connected

MT SERIES

18v LXT® Lithium-Ion > COMBO

KITS

M9509B

M9510B

M9511B

M9001B

100 mm (4”) Angle Grinder

115 mm (4 1/2”) Angle Grinder

125 mm (5”) Angle Grinder

230 mm (9”) Angle Grinder

Machined bevel gears provide longer service life

High performance and durability at less expense

Compact and lightweight for high production work with less fatigue

High performance and durability at less expense

Continuous rating input

850W

2,000W

Wheel Diametre

100 mm (4”)

115 mm (4-1/2”)

125 mm (5”)

230 mm (9”)

No Load Speed (RPM)

11,000

6,600

Dimensions (L x W x H)

276x118x101 mm

276x130x111 mm

276x140x111 mm

466x250x138 mm

Net weight

1.8 kg

2.0 kg

5.7 kg

Angle Grinder

M6501M

Multi tool / Speed Drill

M6001B

M8100B

M9800BKX2

6.5 mm (1/4”) Speed Drill

10 mm (3/8”) Reversing Drill 16 mm (5/8”) Hammer Drill 200W Multi Tool

Ideal for drilling smaller holes in wood & steel

High performance and durability at less expense

“Hammering with Rotation” or “Rotation Only”

Variable speed control dial (15,00022,000 OPM)

Continuous rating input

230W

450W

710W

200W

Capacity: Steel / Wood

6.5 mm / 9mm

10 mm / 25mm

13 mm / 30mm

OPM : 15,000 - 22,000

No Load Speed (RPM)

0 - 4,500

0 - 3,000

0 - 3,200

Oscillation Angle: Left - Right 1.6°

Dimensions (L x W x H)

203x63x171 mm

229x64x175 mm

296x77x202 mm

283x68x98 mm

Net weight

0.95 kg

1.3 kg

2.1 kg

1.2 kg

M8301DWEM

M6901DZM

13 mm (1/2”) Hammer Drill

18v Cordless Impact Driver

190 / 185 mm Circular Saw

High performance and durability at less expense

Soft grip provides more control and reduced fatigue

Dust nozzle is attachable for connecting to vacuum cleaner

Capacity: Steel / Wood

13 mm / 36 mm

M4 - M8

Continuous rating input

1,050W

Blows Per Minute (BPM)

0 - 21,000

Hex Shank: 6.35 mm (1/4”)

Max Cutting Capacity

90°: 68 / 66 mm - 45°: 46 / 44 mm

No Load Speed (RPM)

0 - 1,400

0 - 2,400

No Load Speed (RPM)

4,900

Dimensions (L x W x H)

238x82x239 mm

173x82x225 mm

Dimensions (L x W x H)

297x232x255 mm

Net weight

1.7 kg

1.5 kg

Net weight

3.8 kg

Hammer Drill / Impact Driver

M4301B

Saws

M5802B

Circular Saw / Jig Saw

M2401M

M2300B

M4501M

Top Handle Jig Saw

355 mm (14”) Portable Saw 255 mm (10”) Mitre Saw

1,010 W Recipro Saw

High performance and durability at less expense

Adjustable spark guard designed to divert sparks

High performance and durability at less expense

Continuous rating input

450W

2,000W

1,500W

1,010W

Max Cutting Capacity

90° Wood: 65 mm / Steel: 6 mm

Round: 127 mm (5”)

Miter Angle: 45° L / 45° R

Length of Stroke: 28 mm (1-1/8”)

Strokes Per Minute (SPM)

0 - 3,100

3,800

4,200

0 - 2,800

Dimensions (L x W x H)

214x75x202 mm

500x280x620 mm

610x485x515 mm

457x98x170 mm

Net weight

1.9kg

13.7 kg

2.5 kg

3.2 kg

www.makita.co.nz

For all other enquiries call 0800 625 482 (0800MAKITA)

| 73

MT SERIES M3700M

Trimmer

M3601M

Circular Saw / Jig Saw

M3600B

6 mm (1/4”) Trimmer

1/4” Plunge Router

1/2” Plunge Router

Transparent base for a clear view of the trimming edge

High performance and durability at less expense

Ergonomically contoured knob style handles with Soft grip

Continuous rating input

530W

Continuous rating input

900W

1,650W

Collet Capacity

6 mm or 1/4”

Collet Capacity

6 mm, 8 mm or 1/4”, 3/8”

12 mm or 1/2”

No Load Speed (RPM)

35,000

No Load Speed (RPM)

27,000

22,000

Dimensions (L x W x H)

82x90x199 mm

Dimensions (L x W x H)

256x110x218 mm

284x148x300 mm

Net weight

1.4kg

Net weight

2.7 kg

5.5 kg

M1901M

Planer

M9400B

Sanders

M9203B

82 mm Power Planer

100 x 610 mm Belt Sander

1/3 Sheet Finishing Sander

High performance and durability at less expense

Powerful 940 W motor for fast material removal

High performance and durability at less expense

Continuous rating input

500W

Continuous rating input

940W

190W

Planing Width

82 mm (3-1/4”)

Belt Size

100 x 610 mm

Pad Size: 92 x 185 mm

No Load Speed (RPM)

16,000

Belt Speed

380 m/min

(OPM) 12,000

Dimensions (L x W x H)

285x157x160 mm

Dimensions (L x W x H)

354x175x169 mm

252x92x154 mm

Net weight

2.8 - 2.9 kg

Net weight

6.2 kg

1.4 kg

M9200B

Sander / Orbit Sander

M9204B

1/4 Sheet Finishing Sander

125 mm (5”) Orbit Sander

14,000 OPM for fast and smooth finish sanding

High performance and durability at less expense

Continuous rating input

180W

240W

Pad Size

112 x 102 mm

123 mm

Orbits Per Minute (OPM)

14,000

12,000

Dimensions (L x W x H)

110x112x133 mm

153x123x144 mm

Net weight

0.9 kg

1.2 kg

M8600M

Demo / Rotary Hammer

M8700M

7.2 J Demolition Hammer

22 mm Rotary Hammer

Compact and lightweight design for reduced operator fatigue

High performance and durability at less expense

Continuous rating input

900W

710W

Impact Energy

7.2 J

1.9 J

Blows Per Minute (BPM)

2,900

0 - 4,350

Dimensions (L x W x H)

406x99x232 mm

362x71x194 mm

Net weight

5.4 kg

2.5 - 2.9 kg

74 |

For all other enquiries call 0800 625 482 (0800MAKITA)

Get Connected

ACCESSORIES

18v LXT® Lithium-Ion > COMBO Belts & Braces

Model

Description

www.makita.co.nz

Description

Model

Quick Release Belt&Strap

E-05290

Leather Belt Black L

E-05365

Belt Loop - 3 Pack

E-05309

Leather Belt Brown M

E-05371

Ultimate Padded Belt&Loop

E-05321

Leather Belt Brown L

E-05387

Quick Release Belt & Belt Loop

E-05337

Ultimate Braces & Phone holder

E-05393

Ultimate Leather Belt w/Loop

E-05343

Ultimate Braces with Clips

E-05402

Leather Belt Black M

E-05359

Pouch & Tool holder Description

Gear & Equipment

Belts & Braces

KITS

Model

Pouch &Tool holder Description

Model

Drill Holster set

E-05094

Fixing Pouch & Hammer Holder

E-05197

Impact Driver Holster Set

E-05119

ZipTopPouch-DualBattery/ Fixing

E-05206

Univeral Pouch &Drill Holster

E-05125

Ultimate Electriciansan Holder

E-05212

Ultimate 2 Pocket Fixing Pouch

E-05131

Ultimate Hammer Tool Holder

E-05228

Ultimate 3 Pocket Fixing Pouch

E-05147

Roofer & General Purpose Pouch

E-05153

Looped Hammer & Axe Holder

E-05240

3 Pouch Tool Belt Set

E-05169

Knife / Secateur Holder

E-05262

Ultimate Heavy Weight Belt

E-05175

Tape Measure Holder

E-05278

Ultimate Electricians Pouch

E-05181

Ultimate Chisel & Tool Holder

E-05284

Description

Model

Description

Model

Side Gate Hammer & Tool Holder

Gear & Equipment

E-05234

Thermal Mug & Holder

E-05608

Guide Rail Protector 1.5m

E-05664

Thermal Flask & Holder

E-05599

Guide Rail Protector 3m

E-10936

For all other enquiries call 0800 625 482 (0800MAKITA)

| 75

ACCESSORIES

Bag&Cases

Knee Pad Set

E-05642

Ultimate Smartphone Holder

E-05583

Ultimate Knee Pad Set

E-05658

Lunch Bag

E-05614

Ultimate Lunch Bag & Belt

E-05620

Description

Model

Ultimate Adjustable Tool Case

E-05418

Bag&Cases

LXT toolbags

Model

Description

Ultimate Open Tool Tote

E-05430

Ultimate Wide Mouth Tool Bag

E-05468

Ultimate Covered Tool Tote

E-05446

Semi-Rigid Tool Bag

E-05496

T Ultimate Gate Mouth Tool Bag

E-05452

Ultimate Chainsaw Bag

E-05549

Description

Model

Description

Makpac Cases

Tool Bag

831327-5

Makpac Case #1

196647-7

Tool Bag 16”

832319-7

Makpac Case #2

196648-5

Tote Bag 21”

199935-1

Makpac Case #3

196649-3

4 pc LXT Bag

199936-9

Makpac Case #4

196650-8

6 pc LXT Bag

832367-6

Carry Bag Multi Function Tool

195638-5

Makpac Cool Box #3

198254-2

Chain Saw Carry Bag

66-753

Makpac Cool Box #4

198253-4

LXT Tool Case with Trolley

66-823

Makpac Stacker Case Trolley

L: 395mm x W:295mm x H:105mm

L: 395mm x W:295mm x H:155mm

L: 395mm x W:295mm x H:215mm

L: 395mm x W:295mm x H:315mm

Customisable Foam Insert for Interlocking Cases 50mm /10mm

T-02571

L: 395mm x W:295mm x H:210mm

L: 395mm x W:295mm x H:315mm

SMARTER FEATURES Optional Customisable Foam Insert

TR00000002

Convenient. Customisable.

Top and side handles for convenient lifting Interlocking latches link cases together Reinforced lid provides stable stacking platform Corresponding channels prevent cases from shifting

76 |

For all other enquiries call 0800 625 482 (0800MAKITA)

Get Connected

ACCESSORIES

NEW KITS

18v LXT® Lithium-Ion > COMBO

Makita® ImpactXPS™ is latest innovation in fastening with insert bits & fastening accessories built for the demands of the professional user.

LASTS UP TO 90x LONGER Compared to standard bits

PRECISION MACHINED TIPS With a full contact fit for improved holding power & longer life

PULSE TORSION ZONE For better transfer of impact power

UNIQUE CARBON ALLOY STEEL Blend flexes for longer life

90 X L A S T S

U P

T O

LONGER T H A N S TA NDA RD BI T S

Makita® ImpactXPS™ is latest innovation in fastening with insert bits and fastening accessories designed to fulfill those needs of premium bits with expectional product life and the highest quality for the demands of the professional user.

makita.co.nz/solutions/impactxps.lsd www.makita.co.nz

For all other enquiries call 0800 625 482 (0800MAKITA)

77 | 77

IMPACT XPS Accessories > IMPACT

XPS

HEX ( ALLEN KEY ) HEAD Description

Size

Qty

Part #

Description

Size

Qty

E-09151

Part #

IMPACT XPS Hex 2.5 50mm POWER BIT 3PK

Hex 2.5-2"

E-09282

IMPACT XPS Hex 5 50mm POWER BIT 15PK

Hex 5-2"

E-09167

IMPACT XPS Hex 3 50mm POWER BIT 3PK

Hex 3-2"

E-09363

IMPACT XPS PH-1 x 50mm POWER BIT 3PK

PH1-2"

E-09173

IMPACT XPS Hex 4 50mm POWER BIT 3PK

Hex 4-2"

E-09379

IMPACT XPS PH-2 x 50mm POWER BIT 3PK

PH2-2"

E-09189

IMPACT XPS Hex 5 50mm POWER BIT 3PK

Hex 5-2"

E-09385

IMPACT XPS PH-3 x 50mm POWER BIT 3PK

PH3-2"

E-09195

IMPACT XPS Hex 6 50mm POWER BIT 3PK

Hex 6-2"

E-09422

IMPACT XPS PH-1 x 75mm POWER BIT 2PK

PH1-3"

E-09204

IMPACT XPS Hex 8 50mm POWER BIT 3PK (S2 material)

Hex 8-2"

E-09438

IMPACT XPS PH-2 x 75mm POWER BIT 2PK

PH2-3"

E-09444

IMPACT XPS PH-3 x 75mm POWER BIT 2PK

PH3-3"

E-09450

IMPACT XPS PH-1 x 150mm POWER BIT 1PK

PH1-6"

E-09466

IMPACT XPS PH-2 x 150mm POWER BIT 1PK

PH2-6"

E-09472

IMPACT XPS PH-3 x 150mm POWER BIT 1PK

PH3-6"

E-09494

IMPACT XPS PH-2 x 50mm POWER BIT 15PK

PH2-2"

E-09248

IMPACT XPS Hex 4 75mmPOWER BIT 2PK

Hex 4-3"

E-09254

IMPACT XPS Hex 5 75mmPOWER BIT 2PK

Hex 5-3"

E-09260

IMPACT XPS Hex 6 75mmPOWER BIT 2PK

Hex 6-3"

E-09276

IMPACT XPS Hex 8 75mm POWER BIT 2PK (S2 material)

Hex 8-3"

TORX Part #

POZIDRIVE Description

Size

Qty

E-09911

IMPACT XPS T10 TORX 50mm POWER BIT 3PK

T10-2"

E-09927

IMPACT XPS T15 TORX 50mm POWER BIT 3PK

T15-2"

E-09933

IMPACT XPS T20 TORX 50mm POWER BIT 3PK

T20-2"

E-09949

IMPACT XPS T25 TORX 50mm POWER BIT 3PK

T25-2"

E-09955

IMPACT XPS T27 TORX 50mm POWER BIT 3PK

T27-2"

E-09961

IMPACT XPS T30 TORX 50mm POWER BIT 3PK

T30-2"

E-09977

IMPACT XPS T40 TORX 50mm POWER BIT 3PK

T40-2"

E-10001

IMPACT XPS T20 TORX 75mm POWER BIT 2PK

T20-3"

E-10017

IMPACT XPS T25 TORX 75mm POWER BIT 2PK

T25-3"

E-10039

IMPACT XPS T30 TORX 75mm POWER BIT 2PK

T30-3"

E-10051

IMPACT XPS T20 TORX 150mm POWER BIT 1PK

T20-6"

E-10067

IMPACT XPS T25 TORX 150mm POWER BIT 1PK

T25-6"

E-10073

IMPACT XPS T30 TORX 150mm POWER BIT 1PK

T30-6"

Part #

Description

E-09597

IMPACT XPS PZ-1 x 50mm INSERT BIT 3PK

E-09606

IMPACT XPS PZ-2 x 50mm INSERT BIT 3PK

E-09612

IMPACT XPS PZ-3 x 50mm INSERT BIT 3PK

PZ1-2"

PZ2-2"

PZ3-2"

SQUARE / ROBERTSON Description

Size

Qty

E-09634

Part #

IMPACT XPS #2 SQUARE 25mm INSERT BIT 5PK

SQ2-1"

E-09656

IMPACT XPS #1 SQUARE 50mm POWER BIT 3PK

SQ1-2"

E-09662

IMPACT XPS #2 SQUARE 50mm POWER BIT 3PK

SQ2-2"

E-09678

IMPACT XPS #3 SQUARE 50mm POWER BIT 3PK

SQ3-2"

E-09715

IMPACT XPS #1 SQUARE 75mm POWER BIT 2PK

SQ1-3"

E-09721

IMPACT XPS #2 SQUARE 75mm POWER BIT 2PK

SQ2-3"

E-09737

IMPACT XPS #3 SQUARE 75mm POWER BIT 2PK

SQ3-3"

E-09743

IMPACT XPS #1 SQUARE 150mm POWER BIT 1PK

SQ1-6"

E-09759

IMPACT XPS #2 SQUARE 150mm POWER BIT 1PK

SQ2-6"

E-09765

IMPACT XPS #3 SQUARE 150mm POWER BIT 1PK

SQ3-6"

E-09771

IMPACT XPS #2 SQUARE 50mm POWER BIT 15PK

SQ2-2"

NEW SITE LEARN MORE: www.makita.co.nz/solutions/impactxps.lsd

1278 | MAKITA.CO.NZ |

For all other enquiries call 0800 625 482 (0800MAKITA)

Errors and omissions excepted (E&OE) - Makita will not be held responsible if an error has been committed. Specifications are subject to change without prior notice. All models and accessories subject to stock on hand.

Get Connected

Accessories > IMPACT

XPS

IMPACT XPS

18v LXT® Lithium-Ion > COMBO

NUTSETTERS Part #

Description

Size

Qty

E-10176

IMPACT XPS 1/4" x 65mm MAGNETIC NUTSETTER 2PK

H1/4"-2-9/16"

E-10182

IMPACT XPS 5/16" x 65mm MAGNETIC NUTSETTER 2PK

H5/16"-2-9/16"

E-10198

IMPACT XPS 3/8" x 65mm MAGNETIC NUTSETTER 2PK

H3/8"-2-9/16"

E-10207

IMPACT XPS 7/16" x 65mm MAGNETIC NUTSETTER 2PK

H7/16"-2-9/16"

E-10229

IMPACT XPS 1/4" x 150mm MAGNETIC NUTSETTER

H1/4"-6"

E-10235

IMPACT XPS 5/16" x 150mm MAGNETIC NUTSETTER

H5/16"-6"

E-10241

IMPACT XPS 3/8" x 150mm MAGNETIC NUTSETTER

H3/8"-6"

E-10263

IMPACT XPS MIXED 65mm MAGNETIC NUTSETTER 3PK

MIX

E-10279

IMPACT XPS MIXED 150mm MAGNETIC NUTSETTER 3PK

MIX

SOCKETS & ADAPTORS Description

Size

Qty

E-10316

Part #

IMPACT XPS 1/4" SQUARE 50mm SOCKET ADAPTER

1/4"SQ-2"

E-10322

IMPACT XPS 3/8" SQUARE 50mm SOCKET ADAPTER

3/8"SQ-2"

E-10338

IMPACT XPS 1/2" SQUARE 50mm SOCKET ADAPTER

1/2"SQ-2"

E-10372

IMPACT XPS 50mm SOCKET ADAPTER MIX 3PK

MIX

E-10394

IMPACT XPS 10PC. SOCKET SET METRIC W/ STANDARD SA

E-10403

IMPACT XPS 8PC. 1/4" DRIVE IMPACT SOCKET METRIC

KITS

E-10497 IMPACT XPS™ 60 PC. IMPACT BIT SET (with quick release bit holder)

• Screw bit 25mm 4xPH1,8xPH2,4xPH3,SQ1,3xSQ2,3xSQ3,PZ1,2 xPZ2,PZ3,T10,T15,2xT20,2xT25,T27,2xT30,T4 0,2xH3,2xH4,2xH5,2xH6 • Screw Bit 50mm PH1,PH2,PH3,SQ1,SQ2,H4,H5,H6,T25,T30 • Nutsetter 45mm 5/16",3/8'' • Mag boost • Quick Release Bit Holder • Socket Adapter 3/8"SQ Drive

BIT HOLDERS Description

Size

Qty

E-10425

Part #

IMPACT XPS MAG BOOST

E-10447

IMPACT XPS 75mm MAGNETIC INSERT BIT HOLDER

E-10453

IMPACT XPS 150mm MAGNETIC INSERT BIT HOLDER

E-10469

IMPACT XPS 305mm MAGNETIC INSERT BIT HOLDER

12"

E-10475 IMPACT XPS™ 35 PC. IMPACT BIT SET

• Screw bit 25mm 2xPH1,3xPH2,2xPH3,SQ1,2xSQ2,SQ3,T10,T15,T20,T25,T30,T40,H3,2xH4,2XH5,2Xh6 • Screw Bit 50mm PH1,PH2,PH3,SQ2,SQ3,H5, H6 • Nutsetter 45mm 1/4",5/16" • Quick Release Bit Holder • Socket Adapter 1/4"SQ Drive

SCAN CODE FOR VIDEO LEARN MORE: www.youtube.com/makitanewzealand

www.makita.co.nz

For all other enquiries call 0800 625 482 (0800MAKITA)

| |7913

MAKITA.CO.NZ

IMPACT X™ Accessories > IMPACT

B-69484

ImpactX™ 35 Pc. Bit Set

X™

B-69490

B-69509

ImpactX™ 40 Pc. Bit Set

ImpactX™ 50 Pc. Bit Set

(28) 25mm Insert Bits

(28 25mm Insert Bits

(32) 25mm Insert Bits

1 ea. #1 Phillips, 7 ea. #2 Phillips, 2 ea. #3 Phillips, 1 ea. #1 Square, 4 ea. #2 Square, 2 ea. #3 Square, 1 ea. #10 Torx®, 2 ea. #15 Torx®, 2 ea. #20 Torx®, 2 ea. #25 Torx®, 1 ea. #27 Torx®, 1 ea. #30 Torx®, 1 ea. #8 Slotted, 1 ea. #10 Slotted

PH1 - 2 ea., PH2 - 6 ea, PH3 - 2 ea. SQ1 - 2 ea., SQ2 - 5 ea, SQ3 - 2 ea. HEX4 - 2 ea., HEX5 - 5 ea, HEX6 - 2ea

(4) 51mm Power Bits

(5) 50mm Power Bits

2 ea. #1 Phillips, 9 ea. #2 Phillips, 2 ea. #3 Phillips, 2 ea. #1 Square, 4 ea. #2 Square, 2 ea. #3 Square, 1 ea. #10 Torx®, 2 ea. #15 Torx®, 2 ea. #20 Torx®, 2 ea. #25 Torx®, 1 ea. #27 Torx®, 1 ea. #30 Torx®, 1 ea. #8 Slotted, 1 ea. #10 Slotted (10) 51mm Power Bits

2 ea. #2 Phillips, 1 ea. #2 Square, 1 ea. #25 Torx®

PH2 - 2 ea. , SQ2 - 2 ea. HEX5 - 1 ea (3) 89mm Power Bits

(1) Insert Bit Holders 1 ea. 60mm (2) 45mm Nut Drivers 1 ea. 1/4”, 1 ea. 5/16”

PH2 - 1 ea, SQ2 - 1 ea and HEX5 - 1 ea (1) Insert Bit Holders

3 ea. #2 Phillips, 1 ea. #3 Phillips, 1 ea. #2 Square, 1 ea. #3 Square. 1 ea. #15 Torx®, 1 ea. #20 Torx®, 1 ea. #25 Torx®, 1 ea. #10 Slotted (2) 89mm Power Bits 1 ea. #2 Phillips, 1 ea. #2 Square (2) Insert Bit Holders

1 ea. 60mm

1 ea. 60mm, 1 ea. 152mm

(3) 89mm Nut Setters

(1) 51mm Socket Adapter / 1 ea. 14mm

1 ea. 1/4”, 1 ea. 5/16”, 1 ea. 3/8”

(3) 45mm Nut Drivers 1 ea. 1/4”, 1 ea. 5/16”, 1 ea. 3/8”

E-01725

ImpactX™ 100 Pc. Bit Set

75 x 25mm Insert Bits PH1 - 8, PH2 - 16 , PH2R - 6, PH3 - 8, SQ2 - 8, SQ3 - 8, T20 - 1, T25 - 1, T27 - 1, T30 - 1, T40 - 1, HEX 2.5mm - 2, HEX 3mm - 2, HEX 4mm - 4, HEX 5mm - 4 and HEX 6mm - 4

(1) 60mm Power Bit 1 x 60mm Insert Bit Holder (1) Nutsetter 1 x 45mm 3/8” Nut Setter

23 x 50mm Power Bits PH1 - 3, PH2 - 6, PH3 - 3, SQ2 - 2 SQ3 - 1, T20 - 1, T25 - 1, HEX 4mm - 2 HEX 5mm - 2 and HEX 6mm - 2

BIT SETS

1480 | MAKITA.CO.NZ |

For all other enquiries call 0800 625 482 (0800MAKITA)

Get Connected

ging

Carded

A-96481

BITS AND ACCESSORIES

nd longer life

ging

25mm

• Manganese Phosphate surface for advanced corrosion resistance • Optimal geometry for an ideal fit and improved holding power

Accessories > IMPACT

ImpactX™ Insert Bits

X™

Part # • Precision machined tips with superior fitment for full contact fit and longer life A-96453 • Performance-optimised S2 steel construction for extended life Description Length Qty/Pkg Packaging ` Type heat™treating ImpactX Insert process Bits for added durability A-96469 • Calibrated #1 25mm 2 Carded A-98837 Square • Precision machined tips with superior #2 fitment for full contact fit and life 25mm 2 longerCarded • Performance-optimised construction for extended life Insert S2 Bitsteel Type Description Length Qty/Pkg Packaging Part # A-99764 #2 25mm 25 Tic-Tac • Calibrated heat treating process for added durability #1 25mm 2 Carded A-96453 A-96481 #3 25mm 2 Carded

Phillips Insert BitType

25mm

Description

Length

25mm

Qty/Pkg

Phillips#2 Reduced#2 25mm25mm 2 Insert Bit#2 Reduced 25mm 25

Carded

A-96469

Tic-Tac

A-99758

Packaging Carded

Part #

Carded

A-98837

A-99764 A-98837

Carded

A-96469

25mm

#3#2 Reduced 25mm25mm

2 25

Carded Tic-Tac

A-96481 A-99764

Carded

A-96481

25mm

A-96506

#10

Part #

Type

A-96512

A-99770

A-96534

` Type

Length

Qty/Pkg

Packaging

Part #

25mm

Carded

A-96540

#15

25mm

Carded

A-96556

#20

25mm

Carded

A-96562

#25

25mm

Carded

A-96578

25 Description#25 Length25mmQty/Pkg

Tic-Tac Packaging

A-97352 Part #

` Type

Square Insert Bit

Type Hex Driver Bit

#27 25mm25mm 2 2 Carded #1Description Carded Length Qty/Pkg Packaging 25mm 2 2 Carded #2 #30 25mm Carded #1 25mm 2 Carded #40 25mm 2 Carded #2 #2 25mm25mm 25 2 Tic-Tac Carded

A-96584 A-96506 Part # A-96590 A-96512 A-96506 A-96609 A-99770 A-96512

A-96534 A-99770

Description

25mm25mm

2 25

Carded Tic-Tac

25mm

Carded

Length

Qty./Pkg.

50mm INSERT BITS 4 2mm

Torx® Insert Bit Set ` Type

2PK

Carded

ImpactX™ One-Pie A-96556

Carded

A-96534

#25 ` Type

A-96562

Carded

A-96578

#25 Qty/Pkg 25mmPackaging 25 Length #27 2 25mm 2 25mm Carded #30 2 25mm 2 25mm Carded

#40 25mm

2 25 25mm Tic-Tac

Carded A-96512 Carded A-99770

25mm

A-96534

Description #1

Square Insert Bit

25mm

Carded

Tic-Tac Part # Carded A-96506

A-97352 Type A-96584 A-96590Torx®

Torx®

ImpactX™ One-Piece Bit Holder and #2 Phillips Insert Bit

Type

Description

Part #

A-96615

#15 #10

Length Insert Includes:Qty/Pkg 1 ea. #10,Packaging #15, #20, #25,Part #27,##30, #40 25mm Carded A-96540 A-96556 25mm 22 Carded

#20 #15

25mm 25mm

Carded A-96556 A-96562 Carded

#25 #20

25mm 25mm

Carded A-96562 A-96578 Carded

#25 #25

25mm 25mm

225

Tic-Tac A-96578 A-97352 Carded

B-65274

#25 #27

25mm 25mm

252

Tic-Tac Carded A-97352 A-96584

Type

Torx Insert Bit

Part #

A-96534

Description

Carded

A-96540

25mm

2PK

B-65224

#27 #30

25mm 25mm

Carded Carded A-96584 A-96590

2PK

B-65280

#30 #40

25mm 25mm

Carded Carded A-96590 A-96609

2.5mm

25mm

2PK

B-65218

#40

25mm

Carded

2mm

25mm

2PK

B-65202

3mm

50mm

2PK

B-65296

4mm

25mm

2PK

B-65230

2PK

B-65305

4mm

50mm

#1 5mm

50mm 50mm

#2 5mm

50mm 50mm

Qty/Pkg

Packaging

2PK Carded

B-69515 B-65311

10PK Carded

B-69521 B-65327

7 Pc. 25mm Torx Insert Bit Set 50mm 50mm 2 2PK Carded A-96615

6mm #3 8mm

25mm

2PK

B-65333 B-69537 B-65268

Includes: 50mm 1 ea. #10, #15, #20, #25, #27, #30, #40 2PK B-65349

8mm

A-96609

4 INSERT BITS

Part #

2 ®

Torx® Bit Set

25mm

Torx® Insert Bit ®

#10

7 Pc. 25mm Torx Insert Bit Set Length Qty/Pkg Packaging

50mm

Length

Insert Bit A-96609

Bit Set ImpactX™Insert One-Piece Bit Holder and #2 Phillips Insert Bit

3mm

Description

5mm

90mm

1PC

6mm

25mm

2PK

B-65355 B-65252

5mm

150mm

1PC

B-65361

5mm

25mm

5PK

B-65246

Description

Length

Qty./Pkg.

Part #

Pozi 1

50mm

2PK

B-65274

Pozi 2

50mm

2PK

B-65224

Pozi 3

50mm

2PK

B-65280

Pozi Bit

A-96540

2.5mm

Pozi Insert Bit

Type

Part #

Carded

http://bit.do/Impact-X

#10

Torx Insert Bit

Packaging

WATCH THE YOUTUBE VIDEO

Description

25mm

® • Manganese Phosphate for advanced resistance2 Torxsurface A-96512 #15 corrosion 25mm • Optimal geometry for an Bit ideal fit and improved holding power Insert A-99770 #20 25mm 2

ImpactX™ One-Piece Bit Holder and #2 Phillips Insert Bit

A-96506

KITS

• Manganese Phosphate surface for advanced corrosion resistance •Part Optimal an ideal fit andDescription improved holding # geometry forType Lengthpower Qty/Pkg

A-96453

Tic-Tac Carded

#2 Reduced

IMPACT X™

18v LXT® Lithium-Ion > COMBO

ImpactX™ One-Piece Bit Holder and #2 Phillips Insert Bit

BITS AND ACCESSORIES

Torx® Insert Bit Set

7 Pc. 25mm Torx® Insert Bit Set A-96615

Includes: 1 ea. #10, #15, #20, #25, #27, #30, #40

4 INSERT BITS

www.makita.co.nz

For all other enquiries call 0800 625 482 (0800MAKITA)

| |8115

MAKITA.CO.NZ

IMPACT>XIMPACT Accessories

X™

BITS AND ACCESSORIES

ImpactX™ Power Bits • Precision machined tips with superior fitment for full contact fit and longer life • Performance-optimised S2 steel construction for extended life • Calibrated heat treating process for added durability

• Manganese Phosphate surface for advanced corrosion resistance • Optimal geometry for an ideal fit and improved holding power

Type

Square Power Bit

Description Length

Qty/Pkg

Packaging

Part #

Carded

A-96693

51mm

Carded

A-96702

51mm

Tic-Tac

A-99792

51mm

Carded

A-96718

89mm

Carded

A-96849

89mm

Carded

A-96855

89mm

Carded

A-96861

152mm

Carded

A-96908

ImpactX™ #3 Phillips 152mm Power Bit Type

Description Length

Phillips Power Bit

Type

Qty/Pkg

Packaging

Part #

51mm

Carded

A-96643

51mm

Carded

A-96659

51mm

Carded

A-96665

51mm

Tic-Tac

A-99786

51mm

Carded

A-96687

89mm

Carded

A-96811

89mm

Carded

A-96827

89mm

Carded

A-96833

152mm

Carded

A-96877

152mm

Carded

A-96883

152mm

Carded

A-96899

305mm

Carded

A-96914

Description Length

Slotted Power Bit

Qty/Pkg

Packaging

Part #

51mm

Carded

A-96796

#10

51mm

Carded

A-96805

Type

Torx® Power Bit

Type

Description Length

Qty/Pkg

Packaging

Part #

#10

51mm

Carded

A-96724

#15

51mm

Carded

A-96730

#20

51mm

Carded

A-96746

#25

51mm

Carded

A-96752

#27

51mm

Carded

A-96768

#30

51mm

Carded

A-96774

#40

51mm

Carded

A-96780

Qty/Pkg

Packaging

Part #

Square Insert Bit

152mm

Carded

A-98675

152mm

Carded

A-98681

Phillips Insert Bit

305mm

Carded

A-99801

305mm

Carded

A-99817

305mm

Carded

A-99823

305mm

Carded

A-98697

305mm

Carded

A-99839

152mm

Carded

A-98706

305mm

Carded

A-99845

152mm

Carded

A-99851

305mm

Carded

A-98712

152mm

Carded

A-98728

Square Insert Bit

Description Length

Socket Adapters

POWER BITS

1682 | MAKITA.CO.NZ |

For all other enquiries call 0800 625 482 (0800MAKITA)

Get Connected

305mm

Accessories > IMPACT

18v LXT® Lithium-Ion > COMBO

Length Length 76mm

Qty/Pkg Qty/Pkg 1

Packaging Packaging Carded

76mm 152mm 152mm 305mm

11 11

Carded Carded Carded Carded

305mm

Carded

3 Pc. Socket Adapter Set 3 Pc. Socket

51mm 51mm

3 3

Carded Carded

KITS

AVAILABLE PACKAGING OPTIONS

• Convenient retracting sleeve for easy one-handed operation AVAILABLE PACKAGING OPTIONS • Convenient retracting sleeve for easy one-handed operation • Holds andand drives screws without wobble or disengaging fromfrom the the bit bit • Holds drives screws without wobble or disengaging • High-quality steel engineered for use with impact drivers • High-quality steel engineered for use with impact drivers Description Description

Part # Part # A-96942 A-96942 A-96958 A-96958 A-96964 A-96964

ImpactX™™Socket Adapters ™ ImpactX™ Socket Finder/Driver ImpactX Adapters

™ Finder/Driver ™ •ImpactX Adapts sockets for use with high torque impact drivers and driver-drills Convenient for torque easy one-handed operation •••Retention ballretracting forforsecure fit tohigh the socket Adapts sockets use sleeve with impact drivers and driver-drills • Holds and drives screws without wobble or disengaging from the bit •••Chamfered edges at square drive forone-handed easy fit intooperation socket Retention ball for secure fit to the socket Convenient retracting sleeve forend easy High-quality steelat engineered forend use with drivers •••Chamfered squarewithout drive for easy fit into socket Holds and edges drives screws wobble orimpact disengaging from the bit • High-quality steel engineered for use with impact drivers Description Length Description Length Qty/Pkg Qty/Pkg Packaging Packaging Description 51mm Length Packaging Description Length Qty/Pkg Qty/Pkg Packaging 11 Carded 76mm Carded Socket 1/4” Drive 51mm 11 Carded 76mm Carded 152mm 1 Carded Socket Adapters 1/4” Drive 120mm 1 Barded 152mm 1 Carded Adapters 120mm Barded 11 Carded 11mm Driv 305mm ™ Finder/Driver 1 Carded 11mm Driv 305mm 3/8” Drive 51mm 1 Carded ™ Finder/Driver 3/8” Drive 51mm 1 Carded 51mm 1 Carded 14mm Drive 1/2” Drive 51mm 1 Carded 14mm Drive 1/2” Drive 19 mm Drive 19 mm Drive

A-96964

™ ™ ImpactX ™ Finder/Driver™ ImpactXFinder/Driver

• Magnetic bit holder provides convenient pick-up and retention of screws •• C-clip securely retains 25mmconvenient bits in the holder Magnetic bit holder provides pick-up and retention of screws •• Two-piece design is engineered forinmaximum C-clip securely retains 25mm bits the holderversatility • Two-piece design is engineered for maximum versatility

Includes: 6,4mm, Adapter Set 9,5mm,12,7mm Includes: 6,4mm, 9,5mm,12,7mm

Carded

IMPACT X

X™

ImpactX™ Two-Piece Bit Holders ImpactX™ Two-Piece Bit Holders

Description Description

Length # # Length Qty/Pkg Qty/PkgPackaging Packaging PartPart 76mm Carded A-97075 76mm 1 1 Carded A-97075 120mm Barded A-97081 120mm 1 1 Barded A-97081

™ Finder/Driver Finder/Driver™

ImpactX™ Magnetic Nut Drivers ImpactX™ Magnetic Nut Drivers

• Magnetic nut driver provides convenient pick-up and retention of hex fasteners •• Lobular design drivesprovides along flats to reducepick-up rounding hex fasteners Magnetic nut driver convenient andofretention of hex fasteners •• Flat edges at hexdrives opening forflats full contact with flangedofhex screws Lobular design along to reduce rounding hexhead fasteners • Flat edges at hex opening for full contact with flanged hex head screws Part Part# # Part Part## A-97025 A-97075 A-97025 A-97075 A-97031 A-97081 A-97031 A-97081 A-97047 A-97047 A-97053 A-97053 A-97069 A-97069

` `

Magnetic Magnetic Nut Drivers Nut Drivers

A-97673 A-97673

Description Description 1/4” Magnetic 1/4” Nut Driver Magnetic 1/4” Nut Driver 6,4agnetic 1/4” Nut Driver 5/16” 6,4agnetic Magnetic Nut Driver 5/16” Nut Driver Magnetic Nut13mm Driver Magnetic 13mm Nut Driver Magnetic 3/8”Driver Nut Magnetic 3/8” 14mm Nutsetter Magnetic Magnetic 14mm Nutsetter Nutsetter Magnetic Nutsetter 7/16” Magnetic 7/16” Nutsetter Magnetic 11mm Nutsetter Magnetic 11mm Nutsetter Magnetic Nutsetter

Length Length 45mm

Qty/Pkg Qty/Pkg 1

Packaging Packaging Carded

45mm 65mm 65mm 152mm 152mm 45mm 45mm 65mm

1 1 1 1 1 1 11

Carded Carded Carded Carded Carded Carded Carded Carded

Part # Part # A-97097 A-97097 A-97112 A-97112 A-97134 A-97134 A-97140 A-97140 A-97162

65mm 152mm 152mm 45mm 45mm 65mm 65mm 152mm 152mm

1 1 1 1 1 1 1 1 1

Carded Carded Carded Carded Carded Carded Carded Carded Carded

A-97162 A-97184 A-97184 A-97190 A-97190 A-97215 A-97215 A-97237 A-97237

45mm 45mm 65mm 65mm

1 1 1 1

Carded Carded Carded Carded

A-97243 A-97243 A-97259 A-97259

ImpactX™ 13mm x 152mm Magnetic Nut Driver ImpactX™ 13mm x 152mm Magnetic Nut Driver Description Description 3 Pc. Magnetic Nut Driver 3 Pc. Magnetic Nut Driver Includes: 1 ea. 1/4”,5/16”,3/8” Includes: 1 ea. 1/4”,5/16”,3/8” 3 Pc. Magnetic Nut Driver 3 Pc. Magnetic Nut Driver Includes: 1 ea. 1/4”,5/16”,3/8” Includes: 1 ea. 1/4”,5/16”,3/8” 3 Pc. Magnetic Nut Driver 3 Pc. Magnetic Nut Driver Includes: 1 ea. 1/4”,5/16”,3/8” Includes: 1 ea. 1/4”,5/16”,3/8”

www.makita.co.nz

Length Length

Qty/Pkg Qty/Pkg

Packaging Packaging

Part # Part #

45mm 45mm

3 3

Carded Carded

A-97265 A-97265

65mm 65mm

3 3

Carded Carded

A-97689 A-97689

152mm 152mm

For all other enquiries call 0800 625 482 (0800MAKITA)

BIT HOLDERS BIT HOLDERS 3 Carded 3

Carded

A-97695 A-97695

5 5

| |8317

MAKITA.CO.NZ

EFFICUT> BLADES Accessories EFFICUT 165mm

BLADES Size

B-57358 165 x 20 x 56T (DHS660 / DHS680 / DSP600)

165mm

B-62991 165 x 20 x 25T (DHS660 / DHS680 / DSP600)

165mm

B-69870 165 x 20 x 60T (DLS600)

165mm

Arbor

140% More cuts per charge (Than 2.2mm kerf blade) 140% Faster Cut Speed (Than 2.2mm kerf blade)

25% more cuts per charge 25% Faster cut speed

70% more cuts per charge

Application

Kerf (mm)

Rake (Deg°)

Ring (mm)

Max. Speed (RPM)

Wood & Melamine- Fine Finish

1.45

23º

9250

(WoodRip+Cross Cut)

1.4

23º

9250

(Wood-Fine Finish)

1.85

10º

9250

Application

Kerf (mm)

105% Faster cut speed

185mm

4 84 | MAKITA.CO.NZ |

Size

B-62044 185 x 20 x 24T

185mm

B-68591 185 x 20 x 45T

185mm

Arbor

40% more cuts per charge 40% faster cut speed

45% more cuts per charge 52% Faster cut speed

Rake (Deg°)

Ring (mm)

Max. Speed (RPM)

Wood

1.45

23º

8250

Wood

1.45

23º

8300

For all other enquiries call 0800 625 482 (0800MAKITA)

Get Connected

Accessories > EFFICUT

EFFICUT BLADES METAL BLADES 18v LXT® Lithium-Ion > COMBO KITS

216mm

Size

E-06993 216 x 30 x 45T (LS002G)

216mm

E-08925 216 x 30 x 60T (LS002G)

216mm

E-08931 216 x 30 x 80T (LS002G)

216mm

E-01943 235 x 25mm x 24T

260mm

B-64646 260 x 30 x 45T

B-67337 260 x 30 x 60T

235mm

Size

260mm

Arbor

Application

44% More cuts per charge than standard blade 49% Faster cut speed than standard blade

Arbor

39% more cuts per charge

Rake (Deg°)

Ring (mm)

Max. Speed (RPM)

Wood

2.0

10º

7,070

Wood

2.0

10º

7,070

Wood

2.0

10º

7,070

Wood RIP & CROSS CUT

2.2

20º

6,500

Application

Kerf (mm)

Rake (Deg°)

Ring (mm)

Max. Speed (RPM)

Wood

2.15

10º

25.4

5,870

Wood

2.15

10º

5,870

Wood

2.15

10º

5,870

50% Faster cut speed

B-67343 260 x 30 x 80T

www.makita.co.nz

260mm

For all other enquiries call 0800 625 482 (0800MAKITA)

|5 | 85

MAKITA.CO.NZ

EFFICUT> BLADES Accessories EFFICUT

305mm

B-67359 305 x 30 x 60T

Size

305mm

B-67365 305 x 30 x 80T

305mm

B-67371 305 x 30 x 100T

305mm

185 - 260mm

E-07250 185 x 20 x 40T

E-07266 260mm x 30mm x 75T

6 86 | MAKITA.CO.NZ |

BLADES

Size

185mm

Arbor

47% more cuts per charge * 100% Faster cut speed

132% more cuts per charge * 336% Faster cut speed

113% more cuts per charge * 285% Faster cut speed

Arbor

47% more cuts per charge compared to competitor 38% longer life compared to competitor

260mm

70% more cuts per charge compared to competitor Half tooth longer life compared to competitor

Application

Kerf (mm)

Rake (Deg°)

Ring (mm)

Max. Speed (RPM)

Wood

2.15

10º

5,000

Wood

2.15

10º

5,000

Wood

2.15

10º

5,000

Kerf (mm)

Composite Decking

1.50

15º

8,250

Composite Decking

2.15

8º

25.4

5,870

For all other enquiries call 0800 625 482 (0800MAKITA)

Rake (Deg°)

Ring (mm)

Max. Speed (RPM)

Application

Get Connected

Accessories > EFFICUT

EFFICUT METAL METAL BLADES 18v LXT® Lithium-Ion > COMBO KITS

136 - 150mm

B-69347 136 x 30T for DCS552

136mm

B-69369 150 x 33T for DCS553

150mm

136 - 150mm

www.makita.co.nz

Size

Arbor

50% more cuts per charge 60% Faster cutting Speed

Size

B-69353 136 x 56T for DCS552

136mm

B-69375 150 x 48T for DCS553

150mm

Arbor

46% More cuts per charge 59% Faster Cutting

Application

Kerf (mm)

Rake (Deg°)

Ring (mm)

Max. Speed (RPM)

Metal (General Purpose)

1.1

0º

4,500

Metal (General Purpose)

1.1

0º

4,680

Application

Kerf (mm)

Rake (Deg°)

Ring (mm)

Max. Speed (RPM)

Metal (General Purpose) & Stainless

1.1

0º

4,500

Metal (General Purpose) & Stainless

1.1

0º

4,680

For all other enquiries call 0800 625 482 (0800MAKITA)

|7 | 87

MAKITA.CO.NZ

SAWING GUIDE RAILS CHART Guide rail

Overall length (m)

Guide rail Guide rail

Part No.

1.4 Overall length (m)Overall Part No.(m) length 1.4

Guide rail

194368-5 Part No. 194367-7 194368-5

3 194368-5 1.4

Overall length (m) Part No. 194367-7 3 length (m) 194367-7 Overall Part No.

1.4-1.5 Overall length (m) Overall length (m)Overall Part No.1.4 length (m)

E-05664 Part No. 194368-5 Part No. E-10936 194367-7 E-05664 Part No.

3.0 3 1.4-1.5 Overall length (m)OverallE-05664 Part No.(m) 1.4-1.5 length

Guide rail

3.0 No. Overall length (m) Part Repair parts guide rail 1.4 194368-5 Seat 10m set (For upper plastic tape repair) Repair parts guide rail 3 Repair parts guide rail 194367-7 Rubber Seat 10m set (For lower rubber tape repair) Seat 10m set (For Seat upper10m plastic repair)plastic tape repair) set tape (For upper Overall length (m) Part No. Rubber Seat 10m Rubber set (For Seat lower10m rubber repair)rubber tape repair) set tape (For lower parts rail No. 1.4-1.5 OverallRepair length (m) guideE-05664 Part

Clamp set

Seat 10m set (For upper plastic tape 3.0repair)

(Use with Guide rail) Clamp setClamp set

E-10936 Overall Part No. 3.0 length (m) E-10936 Part No. 1.4-1.5 E-05664 Overall length (m) Part No. 194416-0 Part No. Part No. 3.0 E-10936 194417-8 194416-0 194416-0

E-10936

194417-8 Part No.

Adjustable angle of Guide Rail

Bevel guide set guide set Bevel 194416-0

Adjustable angleAdjustable of194417-8 Guide Rail angle of Guide Rail

Rubber Seat 10m set (For lower rubber tape repair)

(Use with Guide rail) (Use with Guide rail) Repair parts guide rail A

Bevel guide set

194417-8

Bevel guide set

Part No.

Clamp set

Seat 10m set (For upper plastic tape repair)

194416-0

A (Use repair) with Guide rail) A tape Rubber Seat 10m set (For lower rubber

194417-8

Adjustable angle of Guide Rail Part No.

Clamp set

Type guide Partset No. Bevel Part No.

Adjustable angle of Guide Rail

A: Standard Part No. Type

Type

(Use with Guide rail)

A: Standard

194385-5 A: Standard

Guide rail Joint connector 2pcs setType

194385-5 196664-7 Part No.

198884-9 Part No.

Guide rail Joint connector 2pcs set 194385-5

196664-7

194385-5 Part No.

Part No. Part No. 196664-7 198884-9

A: Standard

Part No.

Guide rail Guide Joint connector 2pcs set 2pcs set rail Joint connector Part No.

196664-7

194385-5

A: Standard

Type

196664-7 Part No.

198884-9 Part No. 198884-9

Guide rail Joint connector 2pcs set Part No. 198884-9

Guide Rail Adaptor E D Guide Rail Guide Adaptor Items Rail Adaptor Items

88 |

E D Items Circular saw

N (F)

Router Jig saw Cutter Circular saw saw Trimmer N (F) R I G Q Circular N (F) R I G Q E Router Jig enquiries saw Router For all other callJig0800 625 482 (0800MAKITA) sawCutter Cutter Circular saw Trimmer Circular saw Circular saw Trimmer

Guide Rail Adaptor Items

DJV180 N (F) DJV181

Q *DRT50

Get Connected

SAWING GUIDE RAIL CHART

18v LXT® Lithium-Ion > COMBO

KITS

Guide Rail Adaptor D

Items

N (F)

Circular saw

Models

Part No.

DHS680

HS0600

HS6600

Router Circular saw Trimmer Jig saw

196953-0 197462-2 198566-3

DHS660 DHS661

199232-5

DJV180 DJV181 DJV182 DHS710 4350FCT 4351FCT

*DRT50 RP0900 RP1800 RP2300FC

R Cutter

DCC501 4100NH2

197252-3 194579-2 198673-2

* Use with Plunge base assembly (P/N:195563-0)

D,E G I,J,K

D,E,N

www.makita.co.nz

For all other enquiries call 0800 625 482 (0800MAKITA)

| 89

Accessories > DIAMOND DIAMOND BLADES

WHEELS

B-55310 125mm Segmented Rescue Diamond Wheel • RESCUE 125mm-2.8mm-22.23mm • Blade is designed for Iron, stainless, alumnium, resin, concrete, glass

OUTER DIA

125MM

INNER DIA

22.23MM

THICKNESS

2.8MM

CUTTING

DRY

B-55326 230mm Segmented Rescue Diamond Blade • RESCUE 230mm-3.1mm-22.23mm • Blade is designed for Iron, stainless, alumnium, resin, concrete, glass

OUTER DIA

230MM

INNER DIA

22.23MM

THICKNESS

3.1MM

CUTTING

DRY

DIAMOND TIP BLADE

VACUUM BRAZED

NORMAL

Steel Pipe

1090 | MAKITA.CO.NZ |

Stainless

None ferrous Metal

Concrete

PVC ( Pipe )

PVC

For all other enquiries call 0800 625 482 (0800MAKITA)

Get Connected

Accessories > SAWING

GUIDE RAILS Accessories > DIAMOND BLADE DIAMOND WHEEL 18v LXT® Lithium-Ion > COMBO KITS E-02515 9” Diamond Blade, Segmented, General Purpose The Makita 9” Diamond Blade, Segmented, General Purpose (E-02515) is ideal for wet or dry cutting applications including block, brick and concrete. The segmented rim design incorporates slots to deliver a faster, cooler cut, with laser-welded segments for improved joint strength. In addition, the optimum bond matrix is engineered for faster, smoother cutting and a long working life. Makita Diamond blades are part of Makita’s broad line-up of solutions for concrete, stone and masonry applications. • Taller 13mm segments are designed for longer life and faster cutting • Up to 4x longer life than competitive blades • For cutting concrete, block, brick, pavers, and roof tiles • Optimum bond matrix provides a faster, longer lasting, and smoother cutting diamond blade • Carefully tensioned for less vibration and a superior user experience • Strict quality control measures ensure superior performance • Dry or wet cutting for added versatiity • For smoother and finer cuts in masonry products • Made with high quality diamonds • For use with angle grinders or masonry saws

DIAMOND BLADE TURBO RIM Diamond Blade features a turbo rim design. The constant contact with the material delivers a smoother finish than segmented blades. Superior quality steel core is engineered for longer life. • • • • •

A-94546 DIAMOND BLADE 100mm A-94552 DIAMOND BLADE 115mm A-97617 DIAMOND BLADE 115mm x 2pks A-94568 DIAMOND BLADE 125mm A-94574 DIAMOND BLADE 180mm

DIAMOND BLADE SEGMENTED RIM Segmented Rim Diamond Blade is ideal for general purpose cutting applications including block, brick and cured concrete. The segmented slots are engineered to deliver a faster yet cooler cut. Diamond blades are part of Makita’s growing line-up of solutions for concrete applications • • • • •

A-94677 DIAMOND BLADE 100mm A-94683 DIAMOND BLADE 115mm A-97623 DIAMOND BLADE 115mm x 2pks A-94699 DIAMOND BLADE 125mm A-94714 DIAMOND BLADE 180mm

DIAMOND BLADE CONTINUOUS RIM Continuous Rim Diamond Blade is ideal for general purpose cutting applications including porcelain, stone and tile. The continuous rim design is engineered for constant contact with the material to deliver a smoother finish than segmented and turbo blades. Diamond blades are part of Makita’s growing line-up of solutions for concrete, stone and masonry applications. • A-95065 DIAMOND BLADE 100mm • A-95071 DIAMOND BLADE 115mm • A-95152 DIAMOND BLADE 125mm • A-95087 DIAMOND BLADE 180mm

8 | MAKITA.CO.NZ Errors and omissions excepted (E&OE) - Makita will not be held responsible if an error has been committed. Specifications are subject to change without prior notice. All models and accessories subject to stock on hand. Errors and omissions excepted (E&OE) - Makita will not be held responsible if an error has been committed. Specifications are subject to change without prior notice. All models and accessories subject to stock on hand. www.makita.co.nz For all other enquiries call 0800 625 482 (0800MAKITA)

| |9111

MAKITA.CO.NZ

SDS PLUS NEMESIS II NEMESIS Accessories > SDS-PLUS

SDS-PLUS Nemesis II Range features 3 Varations of a TCT (Tungsten Carbide Tip)

Geometry of TCT varies by diametre. 5-10mm, thanks to state of the art technology, come with big solid TCT, instead of slotted TCT . 12-16mm come with slotted TCT. 18-32mm come with three piece slotted TCT. Please note that, as you may know, all of the size of current nemesis are with slotted TCT.

Dia. 5-10mm Solid type

Dia. 2-16mm Slotted type

Dia. 8-32mm Slotted type

Solid TCT

Rebar chamfer Rebar chamfer

Rebar chamfer

Shoulder

SDS-PLUS Nemesis II Features

• Cuts

• Heavy-Duty

• Innovative

• Improved

through rebar Debris Removal • Innovative Flute design

• Increased

• Lower

2 92 | MAKITA.CO.NZ |

Design Durability • Speed Design - Faster Drilling

For all other enquiries call 0800 625 482 (0800MAKITA)

Flute Design Vibration • Drills Precision Holes

Get Connected

Accessories > SDS-MAX NEMESIS

Item

Description

Dia. in mm

Useable length

Overall length

NEW

E-04260

SDS-PLUS 6x115mm

6mm

115

NEW

SDS-PLUS 5x165mm

5mm

100

E-04151

SDS PLUS NEMESIS II

18v LXT® Lithium-Ion > COMBO

KITS

Diametre in mm

Useable length

Overall length

SDS-PLUS 12x265mm

200

265

E-04640

SDS-PLUS 12x315mm

250

Item

Description

E-04634

NEW

165

NEW

E-04167

SDS-PLUS 5x215mm

5mm

150

215

NEW

E-04656

SDS-PLUS 12x365mm

300

365

NEW

SDS-PLUS 5x265mm

5mm

200

265

B-58366

SDS-PLUS 12x450mm

400

450

SDS-PLUS 12x600mm

550

600

E-04173 NEW

E-04204

SDS-PLUS 5.5x115mm

5.5mm

115

NEW

E-04210

SDS-PLUS 5.5x165mm

5.5mm

100

165

B-58388 SDS-PLUS 12x1000mm

950

1000

NEW

SDS-PLUS 5.5x215mm

5.5mm

150

215

B-58431

SDS-PLUS 14x160mm

100

160

NEW

E-04715

SDS-PLUS 14x215mm

150

215

NEW

E-04721

SDS-PLUS 14x265mm

200

265

NEW

SDS-PLUS 14x315mm

250

315

NEW

E-04743

SDS-PLUS 14x365mm

300

365

SDS-PLUS 14x600mm

550

600

950

1000

E-04226 NEW

E-04232

SDS-PLUS 5.5x265mm

5.5mm

200

265

B-57962

SDS-PLUS 6x110mm

6mm

110

NEW

SDS-PLUS 6x165mm

6mm

100

165

E-04276 NEW

E-04282

SDS-PLUS 6x215mm

6mm

150

215

E-10768

E-04737

NEW

SDS-PLUS 6x265mm

6mm

200

265

B-58481

NEW

SDS-PLUS 6.5x165mm

6.5mm

100

165

B-58497 SDS-PLUS 14x1000mm

E-04298 E-04335 NEW

E-04341 NEW

E-04357 NEW

E-04363

SDS-PLUS 6.5x215mm SDS-PLUS 6.5x265mm SDS-PLUS 6.5x315mm

6.5mm 6.5mm 6.5mm

150 200 250

215 265 315

NEW

E-04759

SDS-PLUS 14x465mm

400

450

NEW

E-04793

SDS-PLUS 16x215mm

150

215

NEW

200

265

SDS-PLUS 16x265mm

NEW

E-04818

SDS-PLUS 16x315mm

250

315

NEW

400

465

E-04802

B-58095

SDS-PLUS 8x115mm

8mm

115

NEW

E-04438

SDS-PLUS 8x165mm

8mm

100

165

E-04824

SDS-PLUS 16x465mm

NEW

SDS-PLUS 8x215mm

8mm

150

215

B-58590

SDS-PLUS 16x600mm

550

600

B-58609 SDS-PLUS 16x1000mm

950

1000

NEW

200

250

E-04444 NEW

E-04450

SDS-PLUS 8x265mm

8mm

200

265

NEW

SDS-PLUS 8x315mm

8mm

250

315

E-04466 B-58198 NEW

E-04525 NEW

E-04531

SDS-PLUS 10x110mm SDS-PLUS 10x165mm SDS-PLUS 10x215mm

10mm 10mm 10mm

50 100 150

110 165 215

E-04852

SDS-PLUS 18x250mm

NEW

E-04868

SDS-PLUS 18x450mm

400

450

NEW

E-04874

SDS-PLUS 20x250mm

200

250

NEW

E-04880

SDS-PLUS 20x450mm

400

450

NEW

E-04896

SDS-PLUS 22x250mm

200

250

NEW

E-04905

SDS-PLUS 22x450mm

400

450

NEW

SDS-PLUS 24x450mm

400

450

NEW

E-04547

SDS-PLUS 10x265mm

10mm

200

265

NEW

E-04553

SDS-PLUS 10x315mm

10mm

250

315

NEW

SDS-PLUS 10x365mm

10mm

300

365

NEW

E-04575

SDS-PLUS 10x450mm

10mm

400

465

B-58724

SDS-PLUS 25x450mm

400

450

B-58263

SDS-PLUS 10x600mm

10mm

550

600

B-58752

SDS-PLUS 28x450mm

400

450

NEW

SDS-PLUS 30x450mm

400

450

NEW

SDS-PLUS 3pcs

400

450

E-04569

NEW

E-04612 NEW

E-04628

SDS-PLUS 12x165mm SDS-PLUS 12x215mm

www.makita.co.nz

12mm 12mm

100 150

165 215

E-05050

E-05088 E-06155

For all other enquiries call 0800 625 482 (0800MAKITA)

|3 | 93

MAKITA.CO.NZ

Accessories CUTTING> WHEEL / CUTTING DISC CUTTING WHEELS / CUTTINGS

DISC

B-46975-12 (4.5”) 115mm Elite Inox Ultra Thin Cutting Disc • Aggressive composition for faster material removal • Innovative design for reduced noise • Reduced vibration for superior user experience • “N” grade hardness is ideal for working with stainless steel OUTER DIA

115 MM

INNER DIA

22.23 MM

THICKNESS

0.8 MM

HARDNESS

Z60T

SHAPE

TYPE 41

B-46981-12 (5”) 125mm Elite Inox Ultra Thin Cutting Disc • • • •

Aggressive composition for faster material removal Innovative design for reduced noise Reduced vibration for superior user experience “N” grade hardness is ideal for working with stainless steel OUTER DIA

125 MM

INNER DIA

22.23 MM

THICKNESS

0.8 MM

HARDNESS

Z60T

SHAPE

TYPE 41

B-51792-25 (4.5”) 115mm 2in1 Grinding / Cutting Wheel • • • •

Efficiency: 2.0 /2.2 thick for faster cutting and reduced material waste Precision: With 46 grit size abrasive for faster and cleaner cuts Versatility: Zirconia Aluminium construction makes these wheels ideal for ferrous metals Innovation: Wheels require less energy for improved battery life when used with cordless grinders OUTER DIA

115 MM

INNER DIA

22.23 MM

THICKNESS

2.0 MM

GRIT

SA46P

SPEED

12,250 RPM

B-51801-25 (5”) 125mm 2in1 Grinding / Cutting Wheel • • • •

125 MM

INNER DIA

22.23 MM

THICKNESS GRIT SPEED

1894 | MAKITA.CO.NZ |

2.2 MM SA46P 12,250 RPM

For all other enquiries call 0800 625 482 (0800MAKITA)

Get Connected

Accessories > HANDTOOL

ADJUSTABLE WRENCH . B-65414 B-65420 B-65436 B-65442

Adjustable wrench 150mm / 29mm Adjustable wrench 200mm / 36mm Adjustable wrench 250mm / 38mm Adjustable wrench 300mm / 43mm

RANGE

HAND TOOL RANGE

18v LXT® Lithium-Ion > COMBO

KITS

B-65458 11Pc Pass Thru Adjustable Wrench Set

B-65470 Locking Adjustable Wrench 250mm

• Sockets work on 6-point,12-point, square, E-T, spline and partially rounded hex fasteners

• Jaw features grooved teeth for added grip • Laser etched scaled (SAE/MM) for quick and easy adjustments to fastener size • Hex jaw design reduces slippage and grips bolt tight

INCLUDES 10PCS 3/8” SOCKET: • 3/8” (10mm) - 3/4” (19mm)

B-65539 Combination Wrenches 9Pcs Set

B-65523 Double Ratchet Wrench 8Pc Set

B-65545 Flare nut wrench 5pc set

• Provide a stronger grip on fasteners Reduces fastener rounding

• Off corner loading provides a stronger grip on fasteners allowing you to apply up to 25% more torque with less rounding

• Drop Forged of alloy steel for Durability Full polish nickel chrome plated for long tool life and easy cleaning

• Box End 15° offset providing knuckle clearance • Box End has 12 points of contact for dependable grip and strength

INCLUDES:

• 72 Tooth ratcheting box end needs as little as 5° to move a fastener compared to 30° for a standard box end wrench

INCLUDES:

• 8, 10, 12, 13, 14, 15, 16, 17, 18mm

• Offset Box ends spread turning force throughout the entire fastener head for a solid hold

INCLUDES: • 9x11, 10x12, 13x14, 15x17, 16x18mm

• 8, 10, 12, 13, 14, 15, 17, 19mm

B-65610 Pass Thru Straight Handle

B-65551 Double Box Wrench 5Pc Set

B-65604 Pass Thru Socket 21Pc Set

• 75° Offset ends allow you to work in tight spaces and offer comfortable hand clearance • 12 points of contact for dependable grip and strength • Drop forged of alloy steel for durability full polish nickel chrome plated for long tool life and easy cleaning

21PCS SET INCLUDES:

INCLUDES:

• Pass thru Socket10mm, 11mm, 12mm, 13mm, 14mm, 15mm, 16mm,17mm, 18mm, 19mm • Pass thru Socket 3/8”, 7/16”, 1/2”, 9/16”, 5/8”, 11/16”, 3/4”

• 8x9, 10x11, 12x13, 14x15, 18x19mm

B-65626 Pass Thru Flex Locking Handle

• Socket adapter 1/4”, 3/8”, • Pass thru Extension bar 75mm • Ratchet handle(Pass thru handle Straight)

B-65632 Pass Thru Extension Bar 75MM • Pass-thru ratchet & socket system allows you to fasten nuts on threaded rods • Allows you to fasten bolts or nuts In deep or tight spaces.

www.makita.co.nz

For all other enquiries call 0800 625 482 (0800MAKITA)

MAKITA.CO.NZ

| 15

| 95

HAND TOOL RANGE

Accessories > HAND

.PASS

TOOL RANGE

THRU SOCKET

B-65648 B-65654 B-65660 B-65676 B-65682 B-65698 B-65707 B-65713 B-65729 B-65735

PASS THRU SOCKET 10MM PASS THRU SOCKET 11MM PASS THRU SOCKET 12MM PASS THRU SOCKET 13MM PASS THRU SOCKET 14MM PASS THRU SOCKET 15MM PASS THRU SOCKET 16MM PASS THRU SOCKET 17MM PASS THRU SOCKET 18MM PASS THRU SOCKET 19MM

B-65779 Smooth Face Claw Hammer 20 Oz .RATCHET

B-65567 B-65573 B-65589

& SOCKET SETS

RATCHET & SOCKET 34PCS 1/4” RATCHET & SOCKET 23PC 3/8” RATCHET & SOCKET 23PC 1/2”

B-65800 Aviation Snips Left Cut

B-65791 Aviation Snips Straight Cut

COLD-ROLLED STEEL: 18GA / 1.22MM STAINLESS STEEL: 23GA / 0.61MM

B-65816 Aviation Snips Right Cut

B-65822 Aviation Snips Bull Dog

COLD-ROLLED STEEL: 18GA / 1.22MM STAINLESS STEEL: 23GA / 0.61MM

COLD-ROLLED STEEL: 16GA / 1.63MM STAINLESS STEEL: 18GA / 1.22MM

• Anti-Ring claw allows you to extract miss hammered nails. • Anti-vibe grip minimize shocks on hand. • Forged one piece steel construction for increased strength and durability • Smooth face

B-65872 Tap Adapter • Auto Locking Feature Allows for Safe Removal of Tap Adapter • Spring Loaded Cap Allows for Quick-Release of Large Tap Adapter

B-65888 Twist Lock Die Adapter • Die adapter works with Pass-Thru® Ratchet and Socket System and Socket Accessories • Works on Round and Hex Shaped Dies

B-65866 Ratcheting tap & die handle • Die Adapter Works on Round and Hex Shaped Dies • 5 Degree Ratcheting Arc with Reversible Lever Eliminates Hand Over Hand Turning • Die Adapter Works with Pass-Thru® Ratchet and Socket System and Socket Accessories

B-65838 40pcs Ratcheting Tap & Die set • Small/Medium Ratcheting T Wrench, • Small Tap Adapter • Medium Tap Adapter, • Medium Hex Die Adapter, • Screwdriver, Pitch Gauge, • NC Hex Die 3mmx0.50, 3mmx0.60, 4mm x 0.70, 4mm x 0.75, 5mm x 0.80, 5mm x 0.90, 6mm x 1.00, 7mm x 1.00, 8mm x 1.25, 9mm x 1.25, 10mm x 1.50, 11mm x 1.50, 12mm x 1.75 • NC Plug Tap 8mm x 1.25, 9mm x 1.25, 10mm x 1.50, 11mm x 1.50, 12mm x 1.75 • NC Taper Tap 3mm x 0.50, 3mm x 0.60, 4mm x 0.70, 4mm x 0.75, 5mm x 0.80, 5mm x 0.90, 6mm x 1.00 , 7mm x 1.00 • NF Hex Die 9mm x 1.00, 10mm x 1.25, 12mm x 1.50 • NF Plug Tap 9mm x 1.00, 10mm x 1.25, 12mm x 1.50 • BSP Hex Die 1/8-28, BSP Tap1/8-28,

16 | MAKITA.CO.NZ

96 |

For all other enquiries call 0800 625 482 (0800MAKITA)

Get Connected

Accessories > HAND

TOOL RANGE

HAND TOOL RANGE

18v LXT® Lithium-Ion > COMBO

KITS

B-65894 Hex Key Wrench 9Pc Set • Ball point for confined place and fastening in max 25°angle • With belt clip to allow tool to cip to your pants for ease of use

INCLUDES: • 1.5, 2, 2.5, 3, 4, 5, 6, 8, 10mm

SCREWDRIVER . Parts No

B-65903 B-65919 B-65931 B-65947 B-65953 B-65969 B-65975 B-65981 B-65997 B-66008 B-66014 B-66020 B-66036 B-66042 B-66058

Product SCREWDRIVER PH1X100 SCREWDRIVER PH2X100 SCREWDRIVER PH3X150 SCREWDRIVER PZ1X80 SCREWDRIVER PZ2X100 SCREWDRIVER PZ3X150 SCREWDRIVER T10X100 SCREWDRIVER T15X100 SCREWDRIVER T20X100 SCREWDRIVER T25X100 SCREWDRIVER T30X100 SCREWDRIVER SLOTTED 4.0X100 SCREWDRIVER SLOTTED 5.5X100 SCREWDRIVER SLOTTED 6.5X100 SCREWDRIVER SLOTTED 8.0X150

.GO-THR0UGH

HANDLE LABEL FOR QUICK AND EASY SELECTION

SCREWDRIVER

• Distinctive two tone grip design handle, ergonomic for best hand comfort, anti-slip and oil resistant dual material • Precise size and Cr-V steel result in high torque strength and long life • Black tip with magnetic for greater fastener control and guarantees a perfect fit every time • With hex shaft which increases leverage and extra torque. fit any brand of wrench which can loosen tight screws easily. • “Go-Through” construction provides greater striking force than traditional cap ends Parts No

B-66064 B-66070 B-66086 B-66092 B-66101 B-66117

Product GO-THR0UGH SCREWDRIVER PH1X75 GO-THR0UGH SCREWDRIVER PH2X100 GO-THR0UGH SCREWDRIVER PH3X150 GO-THROUGH SCREWDRIVER PZ1X75 GO-THROUGH SCREWDRIVER PZ2X100 GO-THROUGH SCREWDRIVER PZ3X150

GO-THROUGH CONSTRUCTION PROVIDES GREATER STRIKING FORCE THAN TRADITIONAL CAP ENDS

www.makita.co.nz

For all other enquiries call 0800 625 482 (0800MAKITA)

MAKITA.CO.NZ

| 17

| 97

40V XGT® BLOWER® / LINE TRIMMER

18v LXT Lithium-Ion > COMBO

UR002GM201 (4.0AH KIT)

UR002GZ (SKIN TOOL ONLY)

UR003GM201 (4.0AH KIT)

KITS

UR003GZ (SKIN TOOL ONLY)

40Vmax XGT Brushless 3-Speed Grass Trimmer, Bike Handle

40Vmax XGT® Brushless 3-Speed Grass Trimmer, Loop Handle

• Large push button switch for increased operability even with gloves • Active Feedback sensing Technology (AFT) turns the motor off if blade rotation is suddenly forced to stop • Automatic torque Drive Technology (ADT) adjusts speed and torque during operation for optimum performance • 3-speed options (Low: 3,500 RPM, Medium: 5,300 RPM, High: 6,500 RPM) allows the operator to match speed to application

UR002GM201 Includes: 40V max XGT® Brushless Cordless Variable Speed Blower (UR002GZ), 2X4.0Ah Batteries (BL4040), Rapid Charger (DC40RA), Charging Adapter (ADP10).

UR003GM201 Includes: 40V max XGT® Brushless Cordless Variable Speed Blower (UR003GZ), 2X4.0Ah Batteries (BL4040), Rapid Charger (DC40RA), Charging Adapter (ADP10).

Spindle Size M10 x 1.25 LH No Load Speed 550W No Load Speed (RPM) 0 - 6,500 / 5,300 / 3,500 Cutting Width 350mm Overall length 1,735mm

Main power switch with auto-off switch

Variable speed control by trigger, with cruise control lever

UB001GM101 (4.0AH KIT)

UB001GZ (SKIN TOOL ONLY)

40Vmax XGT Brushless Cordless Variable Speed Blower ®

• Compact and lightweight for single handed operation • Powerful blowing force (Max 17N) • Variable control trigger and Cruise control lever for adjusting blowing force in the commonly used range UB001GM101 Includes: 40V max XGT® Brushless Cordless Variable Speed Blower (UB001GZ), 4.0Ah Battery (BL4040), Rapid Charger (DC40RA).

www.makita.co.nz

Cruise Control Mode Boost Mode Cruise Control Mode Boost Mode No Load Speed (RPM) Cruise Control Mode Boost Mode Sound Pressure Level Dimensions (L x W x H) Net weight Max Air Volume Max Air Velocity

For all other enquiries call 0800 625 482 (0800MAKITA)

0 - 13.5 m³/min 16.0 m³/min 53 m/s 64 m/s 0 - 20,000 23,000 4.3 - 4.6 kg 83.7 dB(A) 600 x 167 x 297 mm 4.3 - 4.6 kgs

| 98

40V XGT® MULTI FUNCTION POWER HEAD / FAN

40Vmax XGT® Brushless Split shaft power head • Powerful Brushless 52 Motor Enables to Work under Heavy Load • No Load Speed of 9,700rpm • 3 Speed selection (High/Medium/ Low) • Attachments are easily changed

UX01GM105 Includes: 40 XGT Brushless Split shaft power head (UX01GZ) , 1 x 4.0Ah battery(BL4040), Rapid Charger (DC40RA) , Charging Adapter (ADP10). 1,000 W 0 - 9,700 0 - 8,200 0 - 5,700 1,001 x 225 x 209 mm 4.2 kgs

Power Output No Load Speed High Mid Low Dimensions Net Weight

UX01GM105 (4.0AH KIT)

UX01GZ (SKIN TOOL ONLY)

UX01G

DUX60

UX01G * DUX60

Brushcutter

ø420mm Nylon cutting head ø2.0

EM406MP* (Narrow guard)

DUX18 *

SW400MP

EM403MP (Universal guard)

Universal guard Ø420mm / Ø2.0

Grass trimmer

BR400MP

Edger

EM409MP (Narrow guard)

Universal guard Ø420mm / Ø2.0

EE400MP EY401MP

EM403MP* UX01G / DUX60

Pole saw

LEVER STYLE LOCK SYSTEM

EM406MP* UX01G / DUX60

EY403MP

Cutting wide: 300mm

Hedge trimmer

FOR QUICK TOOL-LESS INSTALLATION

EM409MP

Cutting wide: 255mm

LE400MP

EN401MP

Angle adjustment

EN410MP

Straight

KR401MP

Ground trimmer Cultivator

UB401MP

EY403MP EE400MP EY401MP

EN420MP

EN401MP

EN410MP

EN420MP

Angle adjustment

KR401MP

160mm

Power brush

BR400MP

Power sweep

SW400MP

Blower Shaft extension attachment

Spare blade set (199204-0)

UB401MP

Low noise

LE400MP

40Vmax XGT® Cordless / Corded 235mm (9-1/4”) Fan • Power using 40VMax XGT Li-Ion batteries or AC Power • Adjustable tilt up to 90° and down 45°, Left / Right 90° • 190m/min maximum wind speed • Compact design 140mm for confined or smaller spaces • 3 Off-timer settings: 1 hour, 2 hours, 4 hours

CF001GZ (SKIN TOOL ONLY) 99 |

Max air flow m3/min High / Med / Low 82 / 65 /52 Max air speed m/min) High / Med / Low 190 / 150 / 120 Continuous run time (min) High / Med / Low 570 / 930 / 1,540 Fan diametre: mm 235 mm (9-1/4”) Automatic oscillation Left/ Right 45° Off-timer switch 1 hour, 2 hours, 4 hours Dimensions w / BL4040 140×333×447 mm Net Weight 2.0 kg

For all other enquiries call 0800 625 482 (0800MAKITA)

Get Connected

40V XGT®® LED WORK LIGHT

18v LXT Lithium-Ion > COMBO

170˚

ML001G 3-stage brightness switch (SKIN TOOL ONLY)

KITS

12 Position 170o pivoting flashlight head

USB output port

40Vmax XGT LED Work Light ®

(Type A, 5V, 2.4A)

Run time

ON /Luminous OFF Flux

up tp 55 hrs

160lm

• 12 Position pivtong flashlight head swivels from 0 to 170 degrees switch Illuminance at 1m from the light source: 3,000 lx • 55 hrs of continous illumination/runtime on a BL4040 with rubber cap to Dimensions w/ BL4040 232 x 88 x 92mm • 4 x 0.5W LEDs provide brightness of 160lm minimize dust and • LED provides a sharp, round spotlight 0.28 kgs debris from entering Net Weight

Continuous illumination (approx.)

on a single full battery charge: hours BL4025

BL4040

ML001G

34h

55h

ML002G

32h*

51h*

3-stage brightness switch

USB output

(Type A, 5V, 2

*USB not in use. / Sub light

3-stage brightness switch

USB output port (Type A, 5V, 2.4A)

Continuous illumination (approx.) ON / OFF

on a single full battery charge: hours

switch

ML001G ML002G

ML002G

on a single full battery charge: hours 40Vmax XGT LED Work Light and Torch ®

• Up to 51hrs runtime on a BL4040 battery BL4025 • 21 Bright white LEDs producing high output of 710lm • USB output port, able to charge mobile devices with 2.1A max ML001G 34h • 3 stage LED brightness switch, full, half or as torch • Lightweight at 0.46 kg skin

ML002G

32h*

51h*

Run time *USB not in use. / Sub light

up tp 51 hrs

Luminous Flux

130-710 lm

Continuous illumination (approx.)

(SKIN TOOL ONLY)

BL4025 BL4040 with rubber cap to minimize dust and 34h debris from entering 55h

Illuminance Dimensions w/ BL4040 BL4040

Net Weight

310-1,900 lx 321 x 86 x 103 mm 1.2 kgs

55h 51h*

*USB not in use. / Sub light

www.makita.co.nz

For all other enquiries call 0800 625 482 (0800MAKITA)

| 100

40V XGT® SLIDE COMPOUND MITRE SAW / CIRCULAR SAW

RS001GM101 (4.0AH KIT)

RS001GZ (SKIN TOOL ONLY)

RS002GM101 (4.0AH KIT)

RS002GZ (SKIN TOOL ONLY)

40Vmax XGT® Brushless 185 mm (7-1/4”) Magnesium Rear Handle Saw

40Vmax XGT Brushless 260 mm (10-1/4”) Magnesium Rear Handle Saw

• 40Vmax XGT battery & BL motor deliver 6,400 RPM for fast cutting and ripping • Automatic torque Drive Technology (ADT) adjusts cutting speed and torque during cut for optimum performance • Electric brake for maximum productivity

• 40Vmax XGT battery & BL motor deliver 4,000 RPM for fast cutting and ripping • Auto-start Wireless System (AWS) connects to compatible vacuum cleaners with Bluetooth • Electric brake for maximum productivity

RS001GM101 Includes: 40V max XGT® Brushless 185mm Magnesium Rear Handle Saw (RS001GZ), 4.0Ah Battery (BL4040), Rapid Charger (DC40RA), Charging Adapter (ADP10).

RS002GM101 Includes: 40V max XGT® Brushless 260mm Magnesium Rear Handle Saw (RS002GZ), 4.0Ah Battery (BL4040), Rapid Charger (DC40RA), Charging Adapter (ADP10).

Blade Diametre 185 mm Blade Diametre 260 mm No Load Speed(RPM) 6,400 No Load Speed(RPM) 4,000 Max Outout 1,400 W Max Outout 1,700 W Cutting Capacity 0°/45/53°: 65/45/38 MM Cutting Capacity 0°/45/56°: 90/70/54.5 MM Dimensions 446 x 196 x 270 MM Dimensions 489 x 193 x 309 MM Net Weight 5.0 - 5.6 Kgs Net Weight 5.7 - 6.3 Kgs

HS003GM203 (4.0AH KIT)

HS003GZ / HS003GZ01 (SKIN TOOL ONLY)

40Vmax XGT Brushless AWS 185mm Circular Saw ®

• Brushless motor delivers 6,000 RPM for fast cutting • Large cutting capacity (68.5 mm at 90°) and bevel capacity (0° - 56°) with a positive stop at 22.5° and 45° • Automatic torque Drive Technology (ADT) adjusts cutting speed and torque HS003GM203 Includes: 40V XGT Brushless AWS 185mm Circular Saw (HS003GZ without AWS Chip) , 2 x 4.0Ah (BL4040), Rapid Charger (DC40RA) , Charging Adapter (ADP10), Efficut 185x24 (B-62044) and Makpac Type 2. Blade Diametre 190 / 185 mm Max Cutting Capacity 90°: 68.5 / 66 mm 45°: 47.5 / 45.5 mm 56°: 35.5 / 34 mm No Load Speed (RPM) 6,000 Dimensions w / BL4040 331x200x290 mm Net Weight 4.6 Kgs

101 |

LS002GM101 (4.0AH KIT)

LS002GZ01 (SKIN TOOL ONLY)

40Vmax XGT® Brushless AWS 216 mm Slide Compound Mitre Saw • Makita built electronically controlled BL™ Brushless Motor delivers 4,800 RPM for faster and smoother cutting • Auto-start Wireless System (AWS) connects to compatible vacuum cleaners with Bluetooth • Easy locking and release of bevel angle LS002GM101 Includes: 40V max XGT® Brushless 216mm Miter Saw (LS002GZ01), 4.0Ah Battery (BL4040), Rapid Charger (DC40RA), Charging Adapter (ADP10) , AWS Auto‑Start Wireless Transmitter(198901-5), Efficut 216 x 45T(E-06993). Blade Diametre Miter Angel Bevel Angel Cutting Capacity Dimensions Net Weight

For all other enquiries call 0800 625 482 (0800MAKITA)

216 mm 60° L / 60° R 48° L / 48° R 90°/90°: 70 X 312 MM 702 X 551 X 557 MM 16.4 Kgs

Get Connected

40V XGT® RECIPRO SAW /® BLUETOOTH RADIO

18v LXT Lithium-Ion > COMBO

KITS

High Cutting Speed ø25.4mm (1") Carbon steel pipe

Metal Cutting speed about

10 % UP

JR001GZ (SKIN TOOL ONLY)

• High cutting speed (Max 3,000 SPM) with 32 mm stroke length • BL motor with high power to weight and size ratio • Toolless blade change; Redesign of blade clamp makes it easier to remove a blade • Electric 2 speed provides ideal RPM of high speed for wooden cutting

Fast

SPF 2 x 10

135

JR001G

35 %

18Vx2 Predecessor Model

40Vmax XGT® Brushless Recipro Saw

100

Slow

Wood Cutting speed about

JR001GM202 (4.0AH KIT)

110

JR001G 18Vx2 Predecessor Model

100

Slow

Fast

Smooth cutting with vertical crank system

Tool-less shoe adjustment

Balancer

JR001GM202 Includes: 40 XGT Brushless Recipro Saw (JR001GZ) , 2 x 4.0Ah (BL4040), Rapid Charger (DC40RA) , Charging Adapter (ADP10) and Plastic Case (821796-8) Length of Stroke Strokes Per Minute (SPM) High / Low Capacity (Pipe) Capacity (Wood) Vibration Level Cutting Boards Vibration Level Cutting Wooden Beams Sound Pressure Level Dimensions w/ BL4040 Net Weight

32 mm 3,000 / 2,300 130 mm 255 mm 18.0 m/s² 19.5 m/s² 85 dB(A) 472x88x239 mm 4.2 kgs

Force

Work amount on a full battery charge*1 Battery: BL4040

about

130pcs

155pcs

about

ø25.4mm (1") Carbon steel pipe

SPF 2 x 10

BL4020 / BL4025 / BL4040

BL1815N / BL1820B / BL1830B / BL1840B / BL1850B / BL1860B

AC adapter jack

USB OUTPUT

BL1016 / BL1021B / BL1041B AUX-IN JACK

MR002G (SKIN TOOL ONLY) 40Vmax XGT® Brushless Job Site Bluetooth® Radio • Compatible with CXT/ LXT/XGT batteries • Runs up to 44 hours with an 40Vmax XGT 4.0Ah • Compact design with IP65 rating ideal for jobsite conditions • 2 x 89mm speakers provide 3.5W x 2 high quality audio • Digital AM / FM Tuner with LCD Backlit Display and 10 pre-sets

www.makita.co.nz

Continuous use up to 44 hours with BL4040 Frequency band FM:87.5 - 108 MHz AM: 522 - 1, 710 kHz Bluetooth Version: 5.0 Speaker Size Woofer: Dia. 89 mm x2 Overall Dimensions 280 x 171 x 298 mm Net Weight 4.4 kgs

For all other enquiries call 0800 625 482 (0800MAKITA)

| 102

6.0m/s

2 Suppression of motor

40V XGT® DEMOLITION HAMMERspeed during no-load

Active dynamic vibration absorber moves in the opposite direction to the drive piston to reduce vibration.

During no-load

Under load

Auto-start Wireless System connects to compatible vacuum cleaner with Bluetooth. The vacuum cleaner automatically runs while the switch is on. Vibration absorbing housing isolates handle and motor.

Vacuum cleaner is activated

Switch on the tool

Suppression of motor

(4.0AHno-load KIT) speed during HM001GM203

HM001GZ (SKIN TOOL ONLY) During no-load Under load

Wireless unit

40Vmax XGT® Demolition Hammer, SDS-MAX Bits

• Powerful BL motor delivers 9.4 J of impact energy to handle the most demanding applications • Auto-start Wireless System (AWS) connects to compatible vacuum cleaners with Bluetooth • Soft no load function ensures low vibration performance

Auto-start Wireless System

eXtreme Protection Technology

Adapt

12 bit angle se Type

connects compatible vacuum with Bluetooth. HM001GM203 Includes: 40V XGTtoBrushless Demolition Hammercleaner (HM001GZ), 2x4.0Ah batteries (BL4040), Rapid Charger , Charging Adapter (ADP10), AWSruns chip and casethe (821848-5). The(DC40RA) vacuum cleaner automatically while switch is on.

Side grip

Impact Energy 9.4 J Blows Per Minute (BPM) 0 - 2,650 Shank Diameter 18 mm Sound Pressure Level 89 Vacuum dB(A) Switch on cleaner Dimensions w/ BL4040 496 x 113 x 258 mm the tool is activated Net Weight 6.3 - 7.1 kgs

Side handle (option)

Wireless unit

Work amount (for 5 minutes) Concrete with compressive strength of 40N/mm 5 minutes) BL4040Work x2 (on aamount full battery(for charge)

Impact energy

Concrete with compressive strength of 40N/mm BL4040 x2 (on a full battery charge)

[EPTA-Procedure 05/2009]

20.9 20.9 Impact energy

Joule Joule

115

HM002G

[EPTA-Procedure 05/2009]

HM002G

AC tools

small

115

100

100 large

small

large

Anti-Vibration Technology Anti-Vibration Technology HM002GM203 (4.0AH KIT)

HM002GZ03 (SKIN TOOL ONLY)

40Vmax X2 (80Vmax) XGT® Demolition Hammer, SDS-MAX Bits • 40Vmax X2 (80Vmax) & BL motor for 20.9 J high power • Auto-start Wireless System (AWS) connects to compatible vacuum cleaners with Bluetooth • Anti-Vibration Technology (AVT) ensures extra-low vibration performance HM002GM203 Includes: 40V XGT Brushless Demolition Hammer (HM002GZ), 2x 4.0Ah batteries (BL4040), Rapid Charger (DC40RA) , Charging Adapter (ADP10), and case(821848-5).

main handle VibrationVibration level at level mainathandle

m/sm/s 8.08.0 2

Suppression of motor speed during no-load

Impact Energy 20.9 J Blows Per Minute (BPM) 950 - 1,900 Shank Diameter 18 mm Sound Pressure Level 92 dB(A) Dimensions w/ BL4040 574 x 146 x 324 mm Net Weight 12.0 - 13.3 kgs During no-load

During no-load

103 |

For all other enquiries call 0800 625 482 (0800MAKITA)

Under load

Under load Get Connected

40V XGT®® ROTARY HAMMER

18v LXT Lithium-Ion > COMBO

HR006GM204 (4.0AH KIT)

HR006GZ (SKIN TOOL ONLY)

40Vmax X2 (80Vmax) XGT® 52mm Rotary Hammer Normal Chuck • Powerful BL motor delivers 21.4 J of impact energy to handle the most demanding applications • AFT (Active Feedback sensing Technology) • Compatible with AWS* for wireless connectivity with compatible dust extraction

HR005GM204 (4.0AH KIT)

KITS

HR005GZ (SKIN TOOL ONLY)

40Vmax XGT® Brushless 40mm Rotary Hammer with AWS • Anti-Vibration Technology (AVT) for extremely low vibration • AFT (Active Feedback sensing Technology) • Compatible with AWS* for wireless connectivity with compatible dust extraction HR005GM204 Includes: 40V XGT Brushless 40mm Rotary Hammer (HR005GZ), 2 x 4.0Ah batteries (BL4040), Rapid Charger (DC40RA) , Charging Adapter (ADP10) and carry case (821837-0).

HR006GM204 Includes: 40V XGT Brushless 52mm Rotary Hammer (HR006GZ), 2 x 4.0Ah batteries (BL4040), Rapid Charger (DC40RA) , Charging Adapter (ADP10),AWS chip and plastic case(821848-5).

Capacity CONCRETE (TCT BIT): 52 MM Capacity CONCRETE (TCT BIT): 40 MM (CORE BIT): 160 MM (CORE BIT): 105 MM Impact Energy 21.4 J Impact Energy 8J Blows Per Minute (BPM) 1,100 - 2,250 Impacts per minute 1,450 - 2,900 BPM No Load Speed 150 - 310 No Load Speed 250 - 500 Sound Level 99.0 Sound Level 91.0 Dimensions w/ BL4040 610 x 140 x 337 mm Dimensions w/ BL4040 500 x 115 x 286 mm Net Weight 12.9 - 14.3 kgs Net Weight 6.7 kgs

Bit Type SDS-PLUS

Optional for Skin tool

HR001GM206 (4.0AH KIT)

Optional for Skin tool

HR001GZ (SKIN TOOL ONLY)

40Vmax XGT® Brushless 28mm Rotary Hammer with AWS • Anti-Vibration Technology (AVT) for extremely low vibration • AFT (Active Feedback sensing Technology) • Optional for Skin tool: HEPA Dust Extraction (DX12) HR001G (191E53-1) HR001GM206 Includes: 40V XGT Brushless 28mm Rotary Hammer Quick change chuck (HR001GZ), DX12 Dust Collection System, 2 x 4.0Ah (BL4040), Rapid Charger (DC40RA) , Charging Adapter (ADP10) and Makpac Type 4 Impact energy 2.8 J Blows Per Minute (BPM) 5,000 Max. drilling capacities in masonry 28mm Max. drilling capacities in steel 13mm Max. drilling capacities in wood 32mm No Load Speed 980 Chuck Capacity 1.5 - 13 mm Dimensions w/ BL4040 373x102x238 mm Net Weight 3.9 kgs

www.makita.co.nz

HR002GM206 (4.0AH KIT)

HR002GZ (SKIN TOOL ONLY)

40Vmax XGT Brushless 28mm Rotary Hammer Quick change chuck with AWS ®

• Anti-Vibration Technology (AVT) for extremely low vibration • AFT (Active Feedback sensing Technology) • Optional for Skin tool: HEPA Dust Extraction (DX12) HR002G (191E59-9) HR002GM206 Includes: 40V XGT Brushless 28mm Rotary Hammer (HR002GZ) , DX14 Dust Collection system, 2 x 4.0Ah (BL4040), Rapid Charger (DC40RA) , Charging Adapter (ADP10) and Makpac Type 4 Impact energy 2.9 J Blows Per Minute (BPM) 5,000 Max. drilling capacities in masonry 28mm Max. drilling capacities in steel 13mm Max. drilling capacities in wood 32mm No Load Speed 980 Chuck Capacity 1.5 - 13 mm Dimensions w/ BL4040 404x102x238 mm Net Weight 4.1 kgs

For all other enquiries call 0800 625 482 (0800MAKITA)

| 104

40V XGT® ANGEL GRINDER

GA035GZ (SKIN TOOL ONLY)

GA036GZ (SKIN TOOL ONLY)

40Vmax XGT® Brushless 150mm (6”) Slide switch Angle Grinder

40Vmax XGT® Brushless 150mm (6”) Paddle switch Angle Grinder

• Extreme performance with 8,500rpm no load speed • Toolless Wheel cover (Slide lever style) for easy adjustment and removal of wheel cover • Active feedback sensors shut down the tool in the event of a kickback • Enhanced safety features including an electric brake, soft start and anti-restart

Wheel Diameter 150 mm Hole Diameter 22.23 mm Max Wheel Thickness 6.4 mm No Load Speed (RPM) 8,500 Max Output 1,100 W Vibration Level Surface Grinding w/ Normal Side Grip 7.0 m/s² Sound Pressure Level 82 dB(A) Dimensions w/ BL4040 410 x 171 x 168 mm Net Weight 3.0 kgs

Wheel Diameter 150 mm Hole Diameter 22.23 mm Max Wheel Thickness 6.4 mm No Load Speed (RPM) 8,500 Max Output 1,100 W Vibration Level Surface Grinding w/ Normal Side Grip 9.0 m/s² Sound Pressure Level 82 dB(A) Dimensions w/ BL4040 410 x 171 x 168 mm Net Weight 3.0 kgs

4.0 BATTERY

GA037GM102 (4.0AH KIT)

GA037GZ (SKIN TOOL ONLY)

GA038GM102 (4.0AH KIT)

GA038GZ (SKIN TOOL ONLY)

40Vmax XGT® Brushless 180mm (7”) Paddle switch Angle Grinder

40Vmax XGT Brushless 230mm (9”) Paddle switch Angle Grinder

• Extreme performance with 7,800rpm no load speed • Active feedback sensors shut down the tool in the event of a kickback • Compatible with AWS* for wireless connectivity with compatible dust extraction • Enhanced safety features including an electric brake, soft start and anti-restart

• Extreme performance with 6,600rpm no load speed • Active feedback sensors shut down the tool in the event of a kickback • Compatible with AWS* for wireless connectivity with compatible dust extraction • Enhanced safety features including an electric brake, soft start and anti-restart

GA037GM102 Includes: 40 XGT Brushless Paddle Switch Angel Grinder (GA037GZ) , 1 x 4.0Ah (BL4040), Rapid Charger (DC40RA) , Charging Adapter (ADP10) and Carry Case (821841-9)

GA038GM102 Includes: 40 XGT Brushless Paddle Switch Angel Grinder (GA038GZ) , 1 x 4.0Ah (BL4040), Rapid Charger (DC40RA) , Charging Adapter (ADP10) and Carry Case (821841-9)

Wheel Diameter 180 mm Hole Diameter 22.23 mm Max Wheel Thickness 6.5 mm No Load Speed (RPM) 7,800 Max Output 1,700 W Vibration Level Surface Grinding w/ Normal Side Grip 7.5 m/s² Sound Pressure Level 88 dB(A) Dimensions w/ BL4040 509 x 200 x 164 mm Net Weight 4.4 kgs

Wheel Diameter 230 mm Hole Diameter 22.23 mm Max Wheel Thickness 6.5 mm No Load Speed (RPM) 6,600 Max Output 1,700 W Vibration Level Surface Grinding w/ Normal Side Grip 7.0 m/s² Sound Pressure Level 88 dB(A) Dimensions w/ BL4040 509 x 250 x 164 mm Net Weight 4.6 kgs

105 |

For all other enquiries call 0800 625 482 (0800MAKITA)

Get Connected

XGT GRINDER 18v LXT®40V Lithium-Ion > COMBO ®

GA005GM202 (4.0AH KIT)

GA005GZ (SKIN TOOL ONLY)

GA013GM202 (4.0AH KIT)

KITS

GA013GZ (SKIN TOOL ONLY)

40Vmax XGT® Brushless 125mm Grinder Slide Switch with Electronic Brake

40Vmax XGT® Brushless 125mm Grinder Paddle Switch with Electronic Brake

• Similar to corded 1,000 W class grinder • AFT (Active Feedback sensing Technology) • Brushless motor delivers 3,000 - 8,500 RPM

GA005GM202 Includes: 40 XGT Brushless 125mm Grinder Slide switch (GA005GZ) , 2 x 4.0Ah (BL4040), Rapid Charger (DC40RA) , Charging Adapter (ADP10) and Makpac Type 4

GA013GM202 Includes: 40 XGT Brushless 125mm Grinder paddle switch (GA013GZ) , 2 x 4.0Ah (BL4040), Rapid Charger (DC40RA) , Charging Adapter (ADP10) and Makpac Type 4

Wheel Diameter 125 mm (5”) Hole Diameter 22.23 mm Max Wheel Thickness 7.2 mm No Load Speed (RPM) 8,500 Max Output 1,100 W Vibration Level 6.5 m/s² Sound Pressure Level 81 dB(A) Dimensions w/ BL4040 410x140x168 mm Net Weight 2.9 kgs

VARIABLE SPEED

Optional: AWS Chip (198901-5)

GA023GZ (SKIN TOOL ONLY)

Optional: AWS Chip (198901-5)

GA029GZ (SKIN TOOL ONLY)

40Vmax XGT Brushless AWS 125mm Grinder Slide Switch Variable Speed with Electronic Brake

40Vmax XGT® Brushless AWS 125mm Grinder Paddle Switch Variable Speed with Electronic Brake

• Similar to corded 1,000 W class grinder • Auto-start Wireless System (AWS) connects to vacuum cleaners with Bluetooth • Variable speed provides fastening control for a wide range of applications • AFT (Active Feedback sensing Technology) • Brushless motor delivers 3,000 - 8,500 RPM

Wheel Diameter 125 mm (5”) Hole Diameter 22.23 mm Max Wheel Thickness 7.2 mm No Load Speed (RPM) 3,000-8,500 Max Output 1,100 W Vibration Level 6.5 m/s² Sound Pressure Level 81 dB(A) Dimensions w/ BL4040 410x140x168 mm Net Weight 2.9 kgs

www.makita.co.nz

For all other enquiries call 0800 625 482 (0800MAKITA)

| 106

40Vmax XGT Li-Ion battery and BL motor quickly re-compress the spring for next firing.

Tough spri

40V XGT® ANGEL DRILL / BRAD NAILER High power

Counterweight mechanism

40Vmax XGT Li-Ion battery and BL motor reduces vibration by moving a counterweight in the quickly re-compress the spring for next firing.opposite direction of the hanmmer. Hanmmer

Counterweight

Counterweight mechanism reduces vibration by moving a counterweight in the opposite direction of the hanmmer. Hanmmer

Counterweight 1

Compact and lightweight design for high maneuverability

Lightweight DA001GM101 (4.0AH KIT)

DA001GZ (SKIN TOOL ONLY)

40Vmax XGT® Brushless 13 mm (1/2”) Angle Drill with Keyed ChuckCompact and lightweight design fordelivers high maneuverability • BL motor 1,400 RPM • ADT (Automatic torque Drive Technology) adjusts speed and torque during operation for optimum performance

Lightweight

DA001GM101 Includes: 40 XGT Brushless Angel Drill (DA001GZ) , 1 x 4.0Ah battery (BL4040), Rapid Charger (DC40RA), and case(821847-7).

2.6kg

Capacity (Steel) 13 mm Capacity Wood (Auger-Bit) 50 mm Capacity Wood (Self-Feed Bit) 118mm (with BL4020) No Load Speed (RPM) High / Low: 0 - 1,400 / 0 - 350 Max Fastening Torque High 48 N·m Low 136 N·m Max Output 1,350 W Dimensions 544 x 128 x 218 mm Net Weight 6.2 kgs

243mm

(with BL4020)

Contact top designed for easy nail placement

243mm

2.5 1

Contact top designed for easy nail placement

Slim nose

with nose adapter

Nail shooting port is located in the(2.5AH center KIT)of FN001GZ (SKIN TOOL ONLY) FN001GM102 4mm contact arm, ® accurate enabling 40Vmax XGT Brushless 18 Ga 40 mm (1-5/8”) Brad Nailer placement. • Drivesnail 6 different lengths of 18 gauge pin nails (15 mm (5/8”), 20 mm (3/4”), 25 mm (1”), 30 mm (1-3/16”), 35 mm (1-3/8”) and 40 mm (1-5/8”)); magazine capacity up to 100 nails • XPT technology that protects against dust & moisture

Accessories

Driving depth Accessories adjustment

with nose adapter

Driving adjustm

4mm

LED job light Battery Charging Time Reference DC40RA

Nose Adapter S Part No. 422665-2

High power

DC40RC

40Vmax XGT Li-Ion battery and BL motor eXtre 5.0Ah min 85m quickly re-compressBL4050F the spring for 50 next firing. Tech BL4040 4.0Ah 45min 67m *1

BL4025 2.5Ah Battery Charging Time Reference Counterweight mechanism 28minFN001G 38m Cordless Brad Nailer

FN001GM102 Includes: 40 XGT Brushless Brad Nailer (FN001GZ) , 1 x 2.5Ah battery (BL4025), Rapid Charger (DC40RA), ADP10 and Macpac 3.

DC40RA

Nose Adapter S Capacity 15, 20, 25, 30, 35, 40 mm Gauge: 18 Ga Part No. 422665-2 Magazine Capacity 100 Shot q’ty on a single full battery charge w/ BL4025: 5,000 Vibration Level 2.5 m/s² or less Dimensions 234 5.0Ah x 86 x 243 mm BL4050F Net Weight 2.6 - 3.2 kg

50min

BL4040 4.0Ah *1

BL4025 2.5Ah 107 |

Nail shooting port is located in the center of contact arm, enabling accurate nail placement.

Slim nose

*1 reduces vibration by moving a counterweight in the DC40RC BL4020 2.0AhCapacity22min

opposite direction of the hanmmer.

Depth Adjustment

Hanmmer Counterweight Recommended battery *1

Auto Firing Stop

85min

45min

67min

28min

38min

*1 For allBL4020 other enquiries 482 (0800MAKITA) 2.0Ahcall 0800 22625 min 30min *1

Recommended battery

Built-in Job Light Carrying Case Standard Equipment : Safety Goggles, Nose Adapter, Hex Wrench, Belt Clip, Battery, Charger

Magazine Capacity Shot q'ty on a single full battery charge Vibration Level Sound Pressure Level Sound Power Level Dimensions (L x W x H)

Get Connected

Net weight

Lengthm (5/8, 3/ Gauge: 100 w/ BL40

2.5 m/s 81 dB(A 92 dB(A w/o Bat (9-1/4 x w/ BL40 (10-3/8 w/ BL40 (11-1/2 2.6 - 3.2

Compact andThelightweight design weight may differ depending on the attachment(s), including

for high maneuverability The lightest and heaviest combination, according to EPTA-Procedu

40V XGT® HAMMER DRILL / DRIVER DRILL ®

18v LXT Lithium-Ion > COMBO

HP001GM203 (4.0AH KIT)

HP001GZ (SKIN TOOL ONLY)

DF001GM203 (4.0AH KIT)

KITS

DF001GZ (SKIN TOOL ONLY)

40Vmax XGT Brushless 13 mm (1/2”) Hammer Driver Drill

40Vmax XGT Brushless Driver Drill

• Delivers 35% or more higher speed than previous model • Active Feedback sensing Technology (AFT) • Variable 2-speed transmission (0-650 & 0-2,600 RPM)

• Delivers 20% or more higher speed than previous model • Active Feedback sensing Technology (AFT) • Increased max speed (0-2,600 RPM) in High mode for faster drilling speed • Variable 2-speed transmission (0-650 & 0-2,600 RPM)

HP001GM203 Includes: 40 XGT Brushless Hammer Driver Drill (HP001GZ) , 2 x 4.0Ah batteries (BL4040), Rapid Charger (DC40RA) , Charging Adapter (ADP10) and Makpac Type2.

Capacity (Steel) 20 mm Capacity Wood (Auger-Bit) 50 mm Capacity Wood (Self-Feed Bit) 76mm Chuck Capacity 1.5 - 13 mm Impacts Per Minute (IPM) High / Low 39,000 / 9,750 No Load Speed (RPM) High / Low 2,600 / 650 Peak Torque 141Nm Dimensions w/ BL4040 182x86x282 mm Net Weight 2.7 kgs

HP002GZ (SKIN TOOL ONLY)

DF001GM203 Includes: 40 XGT Brushless Driver Drill (DF001GZ) , 2 x 4.0Ah batteries (BL4040), Rapid Charger (DC40RA) , Charging Adapter (ADP10) and Makpac Type2. Capacity (Steel) 20 mm Capacity Wood (Auger-Bit) 50 mm Capacity Wood (Self-Feed Bit) 76mm Chuck Capacity 1.5 - 13 mm No Load Speed (RPM) High / Low 2,600 / 650 Max Fastening Torque High / Low 140 / 68Nm Max Peak Torque 141Nm Dimensions w/ BL4040 181x86x282 mm Net Weight 2.7 kgs

DF002GZ (SKIN TOOL ONLY)

40Vmax XGT® Brushless 13 mm (1/2”) Hammer Driver Drill

40Vmax XGT® Brushless 13 mm (1/2”) Driver Drill

• 65Nm Max lock torque and Lightweight at 1.31kg skin tool • Mechanical 2 speed gearing with all metal gear construction • Electronic clutch for selecting between 21 torque range settings • XPT technology that protects against dust & moisture

Capacity (Steel) Capacity Wood (Auger-Bit) Capacity Wood (Self-Feed Bit) Chuck Capacity Impacts Per Minute (IPM) High / Low No Load Speed (RPM) High / Low Max Fastening Torque Hard / Soft Dimensions w/ BL4040 Net Weight

www.makita.co.nz

13 mm 38 mm 38 mm 1.5 - 13 mm 33,000 / 9,000 2,200 / 600 60/30 Nm 174x86x272 mm 2.0 kgs

Capacity (Steel) Capacity Wood (Auger-Bit) Capacity Wood (Self-Feed Bit) Chuck Capacity No Load Speed (RPM) High / Low Max Fastening Torque Hard / Soft Max Lock Torque Dimensions w/ BL4040 Net Weight

For all other enquiries call 0800 625 482 (0800MAKITA)

13 mm 38 mm 38 mm 1.5 - 13 mm 2,200 / 600 64 / 30 Nm 65 Nm 164x86x294 mm 1.9 kgs

| 108

40V XGT® IMPACT DRIVER / IMPACT WRENCH

TD001GM204 (4.0AH KIT)

40Vmax XGT Brushless Wood/Bolt/T-Mode Impact Driver • Brushless Motor delivers High Power 220 N·m • One-touch speed selector provides precise fastening control for a wide range of applications • Multiple operation modes for a wide range of applications; 4-speed power selection plus 6 Assist modes (2 T-modes, 1 Wood mode, 3 Bolt modes) TD001GM204 Includes: 40 XGT Brushless Impact Driver (TD001GZ) , 2 x 4.0Ah batteries (BL4040), Rapid Charger (DC40RA) , Charging Adapter (ADP10) and Makpac Type2. Machine Screw

Capacity

TW001GM203 (4.0AH KIT)

TD001GZ (SKIN TOOL ONLY)

M4 - M8

Standard Bolt M5-M16

High Strength Bolt M5-M14

TW001GZ (SKIN TOOL ONLY)

40Vmax XGT Brushless 3/4” (19mm) Wrench, Reverse Rotation Auto Stop Mode ®

• Delivers Over 2,000 Nm of Nut-Busting Torque • Reverse Rotation Auto Stop Mode stops fter the bolt/nut loosened enough • Variable 4-speed provides fastening control for a wide range of applications TW001GM203 Includes: 40V XGT Brushless 3/4” (19 mm) Impact Wrench (TW001GZ) , 2 x 4.0Ah batteries (BL4040), Rapid Charger (DC40RA) , Charging Adapter (ADP10) and Makpac Type 2. Standard Bolt

Fastening Capacities

M12-M36

High Strength Bolt M10-M27

Square Drive

19 mm (3/4”)

No Load Speed (RPM)

Max / Hard / Med / Soft

1,800 / 1,400 / 1,150 / 950

Impacts Per Minute (IPM)

Max / Hard / Med / Soft

Hex Shank

6.35 mm (1/4”)

No Load Speed (RPM)

Max / Hard / Soft

3,700 / 3,200 / 1,100

Impacts Per Minute (IPM)

Max / Hard / Soft

4,400 / 3,600 / 1,100

Dimensions w / BL4040

217x94x303 mm

220 N·m

Net Weight

3.9 Kgs

Dimensions w/ BL4040

120x86x250 mm

Net Weight

3.9 kgs

Max Fastening Torque

TW004GM203 (4.0AH KIT)

Max Fastening Torque

2,500 / 2,400 / 2,200 / 1,900 1,630 N·m

TW005GZ (SKIN TOOL ONLY)

TW004GZ (SKIN TOOL ONLY)

40Vmax XGT Brushless 1/2” Impact Wrench C Ring

40Vmax XGT® Brushless 1/2” Impact Wrench Detent Pin

• Trigger switch with full speed mode • Powerful 630Nm nut busting torque • Compact design with a overall length of 144 mm

• Trigger switch with full speed mode • Powerful 630Nm nut busting torque • Compact design with a overall length of 144 mm • 4 Stage power selection for optimum rpm and fastening torque

TW001GM203 Includes: 40V XGT Brushless 1/2” Impact Wrench (TW004GZ), 2 x 4.0Ah batteries (BL4040), Rapid Charger (DC40RA) , Charging Adapter (ADP10) and Makpac Type 2. Fastening Capacities

Standard Bolt

M10-M20

High Strength Bolt M10-M16

Fastening Capacities

Standard Bolt

M10-M20

High Strength Bolt M10-M16

Square Drive

12.7 mm (1/2”)

Square Drive

12.7 mm (1/2”)

No Load Speed (RPM)

Max / Hard / Med / Soft

3,200 / 2,600 / 1,800 / 1,000

No Load Speed (RPM)

Max / Hard / Med / Soft

3,200 / 2,600 / 1,800 / 1,000

Impacts Per Minute (IPM)

Max / Hard / Med / Soft

4,000 / 3,400 / 2,600 / 1,800

Impacts Per Minute (IPM)

Max / Hard / Med / Soft

4,000 / 3,400 / 2,600 / 1,800

350 N·m

Max Fastening Torque

Dimensions w / BL4040

144x86x253 mm

Dimensions w / BL4040

144x86x253 mm

Net Weight

1.9 Kgs

Net Weight

1.9 Kgs

Max Fastening Torque

109 |

For all other enquiries call 0800 625 482 (0800MAKITA)

350 N·m

Get Connected

40VMAX XGT COMBO KITS

18v LXT® Lithium-Ion > COMBO

KITS

DK0155G301 40Vmax XGT Brushless 3-Pc Combo Kit

TD001GZ XGT® 40V Max Brushless Impact Driver

(1) x XGT® 40V 2.5Ah (BL4025) (1) x XGT® 40V 4.0Ah (BL4040)

HP001GZ XGT® 40V Max Brushless Hammer Driver Drill

XGT® 40V Charger (DC40RA)

HS003GZ XGT® 40V Max Brushless 185mm Circular Saw

Adaptor LXT® to XGT® (ADP10) and Makita Carry tool bag (832367-6)

DK0115G601 40Vmax XGT Brushless 6-Pc Combo Kit

TD001GZ XGT® 40V Max Brushless Impact Driver

HR001GZ XGT® 40V Max Brushless AWS™ AVT® 28mm Rotary Hammer Normal chuck

HP001GZ XGT® 40V Max Brushless Hammer Driver Drill

HS003GZ XGT® 40V Max Brushless AWS 185mm Circular Saw

JR001GZ XGT® 40V Max Brushless Recipro Saw

(2) x XGT® 40V 4.0Ah (BL4040) XGT® 40V Charger (DC40RA)

GA005GZ XGT® 40V Max Brushless Grinder 125mm Slide Switch

Adaptor LXT® to XGT® (ADP10) and Makita Carry tool bag (832367-6)

www.makita.co.nz

For all other enquiries call 0800 625 482 (0800MAKITA)

| 110

40V MAX XGT® 2-PC COMBO KITS DK0114G201 40Vmax XGT Brushless 2-Pc Combo Kit

TD001GZ XGT® 40V Max Brushless Impact Driver

XGT® 40V Charger (DC40RA)

HP001GZ XGT® 40V Max Brushless Hammer Driver Drill

Adaptor LXT® to XGT® (ADP10) and Makita Carry tool bag (832319-7)

(2) x XGT® 40V 4.0Ah (BL4040)

DK0114G202 40Vmax XGT Brushless 2-Pc Combo Kit

TD001GZ XGT® 40V Max Brushless Impact Driver

XGT® 40V Charger (DC40RA)

HP001GZ XGT® 40V Max Brushless Hammer Driver Drill

Adaptor LXT® to XGT® (ADP10) and Makita Carry tool bag (832319-7)

(2) x XGT® 40V 2.5Ah (BL4025)

DK0139G201 40Vmax XGT Brushless 2-Pc Combo Kit

TW001GZ XGT® 40V Max Brushless 3/4” Impact Wrench

XGT® 40V Charger (DC40RA)

GA013GZ XGT® 40V Max Brushless 125mm Paddle switch Angle Grinder

Adaptor LXT® to XGT® (ADP10) and Makita Carry tool bag (832319-7)

(2) x XGT® 40V 4.0Ah (BL4040)

111 |

For all other enquiries call 0800 625 482 (0800MAKITA)

Get Connected

40Vmax Lithium-ion Battery Series

XGT is durable and built to perform!

Wall

designed for 40Vmax Li-Ion batteries

Terminal short-circuit prevention structure

The protection wall is provided between terminals against water and dust.

Insulating paper

Film

Water-proof ring

Cell

Waterproof Triple-layer Structure

prevents cell failure due to water and dust.

4-LED fuel gauge indicator

Heavy duty outer casing and cell holder Create a space to absorb impact

Battery rail

Shock absorption structure

High Rigidity Battery Rails Durable slide in battery rail that holds the withstand high power products

40Vmax Fast Charger The enlarged and raised LED light provides clearer indication of charging status.

DC40RA

Interchangeable Adapter

ADP10

Compatible with LXT Li-Ion batteries

112

Tool

XGT is a new system with its own tools, batteries, and chargers. A combination of innovative tool design and higher output batteries provide a genuine solution for high demand industrial users.

Battery

Battery Charger

Digital communication

Optimum power supply system and Optimum charging system The XGT range of tools and batteries come with a built-in program, providing digital communication between the battery and tool. Allowing not only for the battery to talk with tool but also the tool to talk to the battery. Battery technology and motor engineering that work together for optimum performance.

Optimum charging system Auto maintenance system with two cooling fans for providing more optimum fast charging

40Vmax Li-ion Batteries BL4020 2.0Ah 72Wh

BL4040 4.0Ah 144Wh

Charging time BL4020 BL4025 BL4040

BL4025 2.5Ah 90Wh 113

BL4050F 5.0Ah 180Wh

BL4050F

22 min 28 min 45 min 50 min

ENABLES WIRELESS CONNECTION OF MAKITA AWS™ CAPABLE TOOLS

WITH COMPATIBLE EXTRACTOR/VACUUM The introduction of a charging adaptor hasDUST enabled consumers to charge Auto-Start both LXT and XGT batteries when using theWireless XGT Transmitter charger.

4 0 V m a x L i t h i u m -+i o n B a t t e r y S e r i e s • Automatic-Start Wireless System (AWS™) utilises Bluetooth® technology for wireless power-on/off communication between tool and dust extractor • Provides intelligent communication between your tools to eliminate cords, increase productivity, and reduce noise •

POWERS 275 LXT PRODUCTS 198901-5

XGT is durable and built to perform!

Wall

designed for 40Vmax Li-Ion batteries

DHR400

AWS

// PG. 28

18V X2 LXT® (36V) Brushless 40mm Advanced AVT® Rotary Hammer Kit, AWS™

DHR182

AWS CAPABLE DHR282 // PG. 28 Terminal short-circuit 18V X2 LXT® (36V) Brushless 28mm AVT ® prevention Rotary Hammer,structure AFT®, AWS™ Capable

Insulating paper

// PG. 28

AWS CAPABLE

18V LXT® Brushless 18mm AVT ® Rotary Hammer, AWS™ Capable*

18V X2 Rotary

The protection wall is provided between terminals against water and dust.

Film

Water-proof ring

DGA901/ DGA701

PG. 32

Cell AWS

Waterproof Triple-layer 18V X2 LXT® (36V) Brushless 230mm 9" and 7” Angle Grinder, AWS™ * Structure

18V LX Drywa

prevents cell failure due to water and dust.

4-LED fuel gauge indicator

Heavy duty outer casing and cell holder Create a space to absorb DGA518 impact

Battery rail

/ DGA512

PG. 31

AWS

18V LXT® Brushless 125mm / 5" Paddle Switch Angle Grinder,structure AWS ™* Shock absorption

DVC665

// PG. 65

AWS

18V X2 LXT (36V) Brushless AWS HEPA High Rigidity Backpack VacuumBattery Rails

18V X2 Circula

Durable slide in battery rail that holds the withstand high power products

40Vmax Fast Charger Interchangeable Adapter

The enlarged and raised LED light provides clearer indication of charging status.

DC40RA

DHS781

AWS CAPABLE ADP10

// PG. 27

18V X2 LXT® (36V) Brushless 190/185mm Circular Saw, AWS™ Capable

DSP601

// PG. 27

AWS

LXT Li-Ion 18V X2 Compatible LXT® (36V)with Brushless 165 mm Plunge batteries Cut Saw, AWS™ Capable

18V X2 Sliding

114

Since the Launch of 18V LXT in 2005, Makita has been leading the way in Cordless Tool innovation and technology. 18V LXT provides consumers with not only the largest range on one battery, it also provides consumers with the most reliable and efficient tools available. Our vision as a Company is to provide consumers with a battery solution for all applications across Building Construction, Industrial, Outdoor Power Equipment and Commercial Cleaning Channels.

In keeping with our vision. Makita is ready to lead the way once again in 2019, we are excited to announcement the launch of our new XGT 40V battery system that will coexist with LXT and continue towards our vision of a battery solution for all applications! Makita will continue to invest heavily in LXT, and there is a tremendous roadmap of new LXT products in the pipeline for trade users in all segments. The LXT Advantage seamlessly utilises a single battery across hundreds of products, with the ability of added power by using two 18 volt batteries in select products with X2. This is a simple concept that has revolutionised how work is done on job sites. Scan QR code to to find out more:

www.makita.co.nz/warranty/

115

18v LXT® Lithium-Ion > COMBO

KITS

CONTINUOUSLY EXPANDING

XGT 40V MAX | 80V MAX

POWER TOOLS

makita.co.nz www.makita.co.nz

For all other enquiries call 0800 625 482 (0800MAKITA)

| 116