Makita NZ XGT Catalogue 2022 Q1

NEW RELEASES Q1-Q2 | 2022

MORE CUTTING POWER THAN PETROL

14” 350MM BLADE

127MM CUTTING DEPTH

A NEW SYSTEM OF EQUIPMENT & TOOLS

NO PETROL

HASSLES INSTANT STARTS

ZERO EMISSIONS makita.co.nz/products/xgt/

OVER 100 YEARS OF

INNOVATION Makita Corporation was founded in 1915 as an electric motor sales and repair

company. Today, as a global brand in over 40 countries, Makita is an innovation leader, manufacturing best-in-class products at 10 plants operating in 8 countries.

1978

Introduced the first cordless tool

Introduced the industry’s first 18V

2009 brushless motor impact driver

2 |

2005 Created 18V LXT® Lithium-Ion System

Released the first cordless tool powered

2012 by two 18V lithium-ion batteries

Codes in these catalogue are correct at time of going to press, however specifications, runtime tests and models are subject to change without further notice.

Get Connected

CORDLESS SOLUTIONS 40V | 80V

max

40Vmax

80Vmax

+ 90 PRODUCTS

*

XGT SYSTEM *By end of 2022

MAXIMUM PERFORMANCE

18V

36V

+ 275 PRODUCTS

*

LXT SYSTEM

*In 2022

Codes in these catalogue are correct at time of going to press, however specifications, runtime tests and models are subject to change without further notice.

makita.co.nz/products/XGT/ | 3

40V | 80V

4

max

Get Connected

WATCH OUR

NATIONAL TV SPOTS

www.youtube.com/makitanewzealand

HIGHER

OUTPUT POWER WITH LONGER RUN TIME

+ 90 PRODUCTS

*

XGT® SYSTEM

*By end of 2022

XGT® is a new 40V | 80V max system of cordless equipment and tools. XGT® outpowers, outsmarts, and outlasts the rest. Through Makita’s innovative engineering, the technology within the XGT® system will create the equipment and tools of the future. * All Cordless Skins Li-ion - 5 years (Registered within 30 days)* or 3 years (Registered post 30 days oa* All Cordless Skins Li-ion - 5 years (Registered within 30 days)* or 3 years (Registered post 30 days or Non-registered)** Batteries & Chargers 2 years

www.makita.co.nz

5

40V | 80V

PURE COPPER WIRE

BUILT-IN MICROCHIPS

Makita XGT features purpose-built brushless motors with more copper windings for increased power output.

In both tool and battery allow for real time digital communication, actively monitoring heat, overload, and over discharge.

RARE EARTH MAGNETS

DIGITAL COMMUNICATION

Of the highest quality are engineered within XGT® brushless motors to maximise power and performance.

Between XGT® tools and batteries through enhanced digital communication technology optimise performance to deliver up to 2X longer sustained power during demanding applications.

®

6 |

max

®

Codes in these catalogue are correct at time of going to press, however specifications, runtime tests and models are subject to change without further notice.

Get Connected

BEYOND LIMITS Learn More at makita.co.nz/products/xgt/

IMPACT ABSORBENT STRUCTURE Durable outer casing and cell holder create space within the battery to absorb impact.

WATER AND DUST RESISTANCE Triple layer and enhanced terminal structure are engineered to protect against water and dust for any jobsite condition.

MULTI-LAYER SURFACE CONTACTS Within tool and battery are designed to take on high current demands.

RAPID OPTIMUM CHARGING SYSTEM XGT® Charger with Dual Cooling Fans digitally communicates before and during the charging process, evaluating battery condition to deliver a consistent fast charge. Charges LXT® batteries with adapter.

Codes in these catalogue are correct at time of going to press, however specifications, runtime tests and models are subject to change without further notice.

makita.co.nz/products/XGT/ | 7

COMBO KITS

DK0157G601

DK0115G601

DK0155G301

Includes: HP001G 40Vmax Brushless Hammer Driver Drill TW007G 40Vmax Brushless 1/2” Mid-Torque Impact Wrench TD001G 40Vmax Brushless Impact Driver GA013G 40Vmax Brushless 125mm Paddle switch Angle Grinder HS003G 40Vmax Brushless 185mm Circular Saw JR001G 40Vmax Brushless Recipro Saw 2 x 40V max XGT® 4.0Ah Battery (BL4040) 40V max XGT® Rapid Optimum Charger (DC40RA) 18V Battery Charger Adaptor (ADP10)

Includes: HP001G 40Vmax Brushless Hammer Driver Drill TD001G 40Vmax Brushless Impact Driver HS003G 40Vmax Brushless AWS* 185mm (7-1/4”) Circular Saw GA005G 40Vmax Brushless 125mm (5”) Slide Switch Angle Grinder HR001G 40Vmax Brushless AWS* 28mm Rotary Hammer JR001G 40Vmax Brushless Recipro Saw 2 x 40V max XGT® 4.0Ah Battery (BL4040) 40V max XGT® Rapid Optimum Charger (DC40RA) 18V Battery Charger Adaptor (ADP10)

Includes: HP001G 40Vmax XGT 40Vmax Brushless Hammer Driver Drill TD001G 40Vmax XGT Brushless 40Vmax Impact Driver HS003G 40Vmax XGT Brushless 185mm Circular Saw 40V max XGT® Lithium-Ion 2.5Ah Battery (BL4025) 40V max XGT® Lithium-Ion 4.0Ah Battery (BL4040) 40V max XGT® Rapid Optimum Charger (DC40RA) 18V Battery Charger Adaptor (ADP10)

40V max XGT® 6-Pc. Combo Kit

DK0156G301

40V max XGT® 3-Pc. Combo Kit Includes: HP001G 40Vmax XGT 40Vmax Brushless Hammer Driver Drill TW007G 40Vmax 1/2” Mid-Torque Impact Wrench GA013G 40Vmax Brushless 125mm Paddle switch Angle Grinder 40V max XGT® Lithium-Ion 2.5Ah Battery (BL4025) 40V max XGT® Lithium-Ion 4.0Ah Battery (BL4040) 40V max XGT® Rapid Optimum Charger (DC40RA) 18V Battery Charger Adaptor (ADP10)

40V max XGT® 6-Pc. Combo Kit

40V max XGT® 3-Pc. Combo Kit

DK0139G201

DK0114G201

40V max XGT® 2-Pc. (4.0Ah) Combo Kit

40V max XGT® 2-Pc. (4.0Ah) Combo Kit

Includes: TW001G 40Vmax XGT Brushless 3/4” Impact Wrench GA013G 40Vmax XGT Brushless 125mm Paddle switch Angle Grinder 2 x 40V max XGT® Lithium-Ion 4.0Ah Battery (BL4040) 40V max XGT® Rapid Optimum Charger (DC40RA) 18V Battery Charger Adaptor (ADP10)

Includes: HP001G 40Vmax Brushless Hammer Driver Drill TD001G 40Vmax Brushless Impact Driver 2 x 40V max XGT® Lithium-Ion 4.0Ah Battery (BL4040) 40V max XGT® Rapid Optimum Charger (DC40RA) 18V Battery Charger Adaptor (ADP10)

40V | 80V

max

OUTPUT HIGHER POWER AND LONGER RUN TIME DK0114G207

DK0114G202

Includes: TD001G 40Vmax XGT Brushless Impact Driver HP001G 40Vmax XGT Brushless Hammer Driver Drill 2 x 40Vmax 2.5Ah Battery (BL4025) 40V Max Rapid Charger (DC40RA), 18V Charging Adaptor (ADP10), Makpac 3

Includes: TD001G 40Vmax XGT Brushless Impact Driver HP001G 40Vmax XGT Brushless Hammer Driver Drill 2 x 40V max XGT® Lithium-Ion 2.5Ah Battery (BL4025) 40V max XGT® Rapid Optimum Charger (DC40RA) 18V Battery Charger Adaptor (ADP10)

40V max XGT® 2-Pc. (2.5Ah) Combo Kit

40V max XGT® 2-Pc. (2.5Ah) Combo Kit

FASTER CHARGING

TO GET WORK DONE FASTER

NEW

8.0Ah 76MIN 5.0Ah 50MIN 4.0Ah 45MIN 2.5Ah 28 MIN 2.0Ah 22MIN 8 |

Codes in these catalogue are correct at time of going to press, however specifications, runtime tests and models are subject to change without further notice.

Get Connected

BATTERIES / CHARGERS

BL4020

BL4025

BL4040

BL4050F

40V max XGT® Li-Ion 2.0Ah Battery

40V max XGT® Li-Ion 2.5Ah Battery

40V max XGT® Li-Ion 4.0Ah Battery

40V max XGT® Li-Ion 5.0Ah Battery

• Reaches full charge in 22 minutes with DC40RA

• Reaches full charge in 28 minutes with DC40RA (80% Charge in 19 minutes)

• Reaches full charge in 45 minutes with DC40RA (80% Charge in 31 minutes)

• Reaches full charge in 50 minutes with DC40RA

OUTPUT HIGHER POWER AND LONGER RUN TIME ADP001G

40V max XGT® USB Charging Adaptor

ADP10 40V max XGT® to 18V Adapter for DC40RA/DC40RB

• 2 USB ports provide quick and easy charging • 2.4A output from each USB port, 4.8A total output when both USB ports are connected • Auto-off turns off the USB output power after 30 minutes • L.E.D. on/off button turns green while in use for operator convenience

BL4080F

• Interchangeable adapter developed for use with XGT charger to charge LXT Li-Ion batteries • Adapts to DC40RA for rapid charging of 18V LXT batteries • Rapid charge an 18V 6.0Ah battery in 40mins

NEW

40V max XGT® Li-Ion 8.0Ah Battery • Higher output power • Reaches full charge in 76 minutes or less • Enhanced cooling system is engineered to maximise battery life • The digital communication within XGT® optimizes performance to provide up to 2X longer sustained power under heavy-load applications • XGT® Tools and Batteries are designed with a multi-layer contact interface for more constant power delivery to take on highcurrent demands • The digital communication within XGT® actively monitors and protects against overload, over-discharge and overheating • XGT® Batteries feature rigid rails with impactresistant construction to secure the battery to the tool during high-demand applications

DC40RA

DC40RB

40V max XGT® Li-Ion Rapid Optimum Charger

40V max XGT® Dual Port Rapid Optimum Charger

• The XGT® Rapid Charger with dual-fan design circulates air through the battery to cool the battery and circuit board quickly for faster charging • The XGT® Rapid Charger’s built-in chip thoroughly communicates during the charging process to control current, voltage, and temperature for more efficient charging • The XGT® Rapid Charger’s digital display indicates battery charge level (-80%, +80%, 100%) • The DC40RA is designed with mounting holes on the back of the charger to provide more options for mounting

COMPATIBILITY CHARGES BOTH XGT ® & LXT ® BATTERIES

Codes in these catalogue are correct at time of going to press, however specifications, runtime tests and models are subject to change without further notice.

• The XGT® Dual Port Rapid charger that is able to charge two Makita XGT Li-Ion batteries at a time as fast as DC40RA charges one battery • The XGT® Rapid Charger’s built-in chip thoroughly communicates during the charging process to control current, voltage, and temperature for more efficient charging • The XGT® Rapid Charger’s digital display indicates battery charge level (-80%, +80%, 100%) • The DC40RB is designed with mounting holes on the back of the charger to provide more options for mounting

Use adapter ADP10 with charger DC40RA to rapid charge 18V LXT® Batteries.

makita.co.nz/products/XGT/ | 9

Featured model

HM002G

20.9J DEMOLITION HAMMER

15% FASTER COMPARED TO CORDED 1,100W EQUIVALENT

STOP

Anti-Vibration Technology (AVT®), an internal counterbalance system, and vibration-absorbing handles work together to reduce vibration.

10 |

Active Feedback-sensing Technology (AFT®) electronically turns off the motor if rotation of bit is suddenly forced to stop.

Codes in these catalogue are correct at time of going to press, however specifications, runtime tests and models are subject to change without further notice.

Compatible with AWS Capable for wireless connectivity with compatible dust extraction

Get Connected

Optional Attachment: Dust Extractor Attachment with HEPA Filter Cleaning Mechanism (DX12)

Optional Attachment: Dust Extractor Attachment with HEPA Filter Cleaning Mechanism (DX15)

HR001GM103 / HR001GZ

HR007GZ

40V max XGT Brushless 28mm AVT D-Handle Rotary Hammer, SDS-PLUS ®

®

• Heavy duty power hitting at 3.0j^ of impact energy • Anti-vibration technology provides extremely low vibration of 8.6m/s² • Active feedback sensors shut down the tool in the event of a kickback • Compatible with AWS* for wireless connectivity with compatible dust extraction • Dust management compatible with multiple options for various environments

40V max XGT® AWS Capable 28mm Rotary Hammer, SDS-PLUS • Heavy duty power 2.8J** of impact force • Anti-vibration technology provides extremely low vibration of 7.0m/s² • Active feedback sensors shut down the tool in the event of a kickback • Compatible with AWS* for wireless connectivity with compatible dust extraction • Dust management compatible with multiple options for various environments

Optional Attachment: Dust Extractor Attachment with HEPA Filter Cleaning Mechanism (DX14)

HR002GM206 / HR002GZ

40V max XGT® Brushless AWS Capable 28mm Rotary Hammer with Interchangeable Chuck, SDS-PLUS • Heavy duty power 2.8j** of impact force • Anti-vibration technology provides extremely low vibration of 7.0m/s² • Active feedback sensors shut down the tool in the event of a kickback • Compatible with AWS* for wireless connectivity with compatible dust extraction • Dust management compatible with multiple options for various environments

Kit includes: 1x 4.0Ah battery (BL4040), rapid charger (DC40RA), DX14 & Makpac 4

COMING SOON

HR001GM103

40V max XGT® AWS Capable 28mm Rotary Hammer, with Dust Extractor, SDS-PLUS • Heavy duty power 2.8J** of impact force • Anti-vibration technology provides extremely low vibration of 7.0m/s² • Active feedback sensors shut down the tool in the event of a kickback Kit includes: 1x 4.0Ah battery (BL4040), rapid charger (DC40RA), DX14 and Makpac 4

Optional Attachment: Dust Extraction Attachment Kit, SDS-MAX, Drilling and Demolition (199142-6)

Optional Attachment: Dust Extraction Attachment Kit, SDS-MAX, Drilling and Demolition (196858-4)

HR005GM201 / HR005GZ

HR006GM204 / HR006GZ

40V max XGT® Brushless AWS Capable 40mm Rotary Hammer - SDS-MAX • Heavy duty power hitting at 8.0j of impact energy • Active feedback sensors shut down the tool in the event of a kickback • Anti-vibration technology provides extremely low vibration of 5.0m/s² • Compatible with AWS Capable for wireless connectivity with compatible dust extraction Kit includes: 2x 4.0Ah batteries (BL4040), rapid charger (DC40RA)

80Vmax (40Vx2) XGT® Brushless 52mm AWS Capable Rotary Hammer - SDS-MAX • Extreme power with 21.4j of impact energy • Active feedback sensors shut down the tool in the event of a kickback • Anti-vibration technology provides extremely low vibration of 8.5m/s2 • Soft no load function reduces speed and vibration when under no lead for improved comfort Kit includes: 2x 4.0Ah batteries (BL4040), Two Port Rapid Charger (DC40RB) with LXT adapter (ADP10) and Carry Case

COMING SOON

Optional Attachment: Dust Extractor Attachment with HEPA Filter Cleaning Mechanism (DX10)

HR008GM101 / HR008GZ

40V max XGT Brushless 30mm AVT Rotary Hammer, SDS-PLUS ®

®

• Heavy duty power hitting at 3.9j^ of impact energy • Anti-vibration technology provides extremely low vibration • Active feedback sensors shut down the tool in the event of a kickback • Compatible with AWS* for wireless connectivity with compatible dust extraction • Dust management compatible with multiple options for various environments Kit includes:1 x 4.0Ah battery (BL4040), Rapid Charger (DC40RA), and Carry Case

Optional Attachment: Dust Extraction Attachment, SDS-MAX, Demolition (199144-2)

Optional Attachment: Dust Extraction Attachment, SDS-MAX, Demolition (199144-2)

HM001GM203 / HM001GZ

HM002GM203 / HM002GZ03

40V max XGT® Brushless AWS Capable Demolition Hammer, SDS-MAX • Heavy duty power delivering 20% faster breaking efficiency than the corded 1,100W equivalent • Anti-Vibration Technology (AVT) an internal counterbalance system significantly reducing vibration • Soft no-load automatically reduces motor speed when idling to increase tool life and performance • Compatible with AWS Capable for wireless connectivity with compatible dust extraction Kit Includes: 2x4.0Ah batteries (BL4040), rapid charger (DC40RA) , AWS Chip (1989015), 18V Charging Adaptor (ADP10) and Case

Codes in these catalogue are correct at time of going to press, however specifications, runtime tests and models are subject to change without further notice.

80V max (40V max X2) XGT® Brushless 18mm AVT® Demolition Hammer Kit, SDS-MAX • Heavy duty power delivering 15% faster breaking efficiency than the corded 1,100W equivalent • Anti-Vibration Technology (AVT) an internal counterbalance system significantly reducing vibration • Soft no-load automatically reduces motor speed when idling to increase tool life and performance • Compatible with AWS Capable for wireless connectivity with compatible dust extraction Kit includes:2x 4.0Ah batteries (BL4040), Two Port Rapid Charger (DC40RB) with LXT adapter (ADP10), and Carry Case

makita.co.nz/products/XGT/ | 11

Featured model Learn More at

LS002G

makita.co.nz/products/xgt/

216MM COMPOUND SAW MAX CUTTING CAPACITIES

312 X 07 MM

LS002GM101 / LS002GZ01

40V max XGT® Brushless AWS Capable 216mm (8-1/2”) Slide Compound Mitre Saw • Makita-built brushless motor delivers 4,800 RPM for faster cutting performance • Cutting capacity of 90°/90°: 70 x 312mm at 90° • At 45° 45°L/45°LR: 50 x 220mm, Bevel 48° L / 48° R • Compatible with AWS Capable for wireless connectivity with compatible dust extraction 4.0Ah battery (BL4040), rapid charger (DC40RA) , AWS Chip (198901-5), Efficut 216 x 45T

12 |

LS004GM101 / LS004GZ01

40V max XGT® Brushless AWS Capable 260mm (10-1/4”) Slide Compound Mitre Saw • Makita-built brushless motor delivers 3,600 RPM for faster cutting performance • Cutting capacity of 90°/90°: 68 x 310mm at 90° • At 45° 45°L/45° LR: 91 x 197mm, Bevel 48° L / 48° R • Compatible with AWS Capable for wireless connectivity with compatible dust extraction 4.0Ah battery (BL4040), Rapid charger (DC40RA) , AWS Chip (198901-5), Efficut 260mm x45T

Codes in these catalogue are correct at time of going to press, however specifications, runtime tests and models are subject to change without further notice.

LS003GM101 / LS003GZ01

40V max XGT® Brushless AWS Capable 305mm (12”) Slide Compound Mitre Saw • Makita-built brushless motor delivers 3,600 RPM for faster cutting performance • Cutting capacity of 90°/90°: 107 x 363mm at 90° • At 45° 45°L/45°LR: 107 x 255mm, Bevel 48° L / 48° R • Compatible with AWS Capable for wireless connectivity with compatible dust extraction 4.0Ah battery (BL4040), Rapid charger (DC40RA) , AWS Chip (198901-5), Efficut 305 x 60T

Get Connected

COMING SOON

HS004GM101 / HS004GZ

40V max XGT® Brushless AWS Capable 185mm Circular Saw • Makita-built brushless motor delivers 6,000 RPM for faster cutting performance • Large cutting capacity (62.5 mm at 90°) and bevel capacity (0° - 48°) with a positive stop at 45° • XPT™ is engineered to provide increased dust and water resistance in harsh jobsite conditions • Compatible with AWS Capable for wireless connectivity with compatible dust extraction Kit includes:1x 4.0Ah battery (BL4040), rapid charger (DC40RA) and Makpac 4

HS003GM104 / HS003GZ

40V max XGT® Brushless AWS Capable 185mm Circular Saw • Makita-built brushless motor delivers 6,000 RPM for faster cutting performance • Large cutting capacity (68.5 mm at 90°) and bevel capacity (0° - 56°) with a positive stop at 22.5° and 45° • XPT™ is engineered to provide increased dust and water resistance in harsh jobsite conditions • Compatible with AWS Capable for wireless connectivity with compatible dust extraction Kit includes: 1x 4.0Ah battery (BL4040), rapid charger (DC40RA) and Makpac 4

HS009GM101 / HS009GZ01

40V max XGT® Brushless AWS Capable 235 mm (9-1/4”) Rail Circular Saw • Makita-built brushless motor delivers 4,000 RPM for faster cutting performance • Cutting capacity (85mm at 90°) and bevel capacity (-1°-60°) with a positive stop at 45° • XPT™ is engineered to provide increased dust and water resistance in harsh jobsite conditions • Compatible with AWS Capable for wireless connectivity with compatible dust extraction Kit includes:1x 4.0Ah battery (BL4040), rapid charger (DC40RA) , AWS Chip (198901-5) and Makpac 4

COMING SOON

HS011GM101 / HS011GZ

40V max XGT® Brushless AWS Capable 270mm Rail Circular Saw • Makita-built brushless motor delivers 3,500 RPM for faster cutting performance • Large cutting capacity (97-101mm at 90°) and bevel capacity (-1°-60°) with a positive stop at 45° • XPT™ is engineered to provide increased dust and water resistance in harsh jobsite conditions • Compatible with AWS Capable for wireless connectivity with compatible dust extraction

RS001GM101 / RS001GZ

40V max XGT® Brushless AWS Capable 185mm Rear Handle Saw • Makita-built brushless motor delivers 6,400 RPM for faster cutting performance • Max. cut capacity of 65mm with up to 53° max bevel capacity • Safety protection with electric brake and soft start for user safety Kit Includes: 1x 4.0Ah battery (BL4040), rapid charger (DC40RA)

Kit includes:1x 4.0Ah battery (BL4040), rapid charger (DC40RA), AWS Chip (198901-5) and Makpac 4

RS002GM101 / RS002GZ

40V max XGT® Brushless AWS Capable 260mm Rear Handle Saw • Makita-built brushless motor delivers 4,000 RPM for up to 2X faster cutting than corded • Max. cut capacity of 95mm with up to 56° max bevel capacity • Safety protection with electric brake and soft start for user safety Kit Includes: 1x 4.0Ah battery (BL4040), rapid charger (DC40RA) with LXT adaptor (ADP10)

COMING SOON GUIDE RAIL

COMPATIBLE

ORBITAL ACTION

SP001GM101 / SP001GZ03

40V max XGT® Brushless AWS 165mm (6-1/2”) Plunge Cut Saw • Makita-built brushless motor with variable speed control dial (2,500 - 4,900 RPM) for faster cutting performance • Large cutting capacity (56 mm at 90º, 40 mm at 45º and 38 mm at 48º) and bevel capacity (-1° - 48°) with a positive stop at 22.5° • Bevel capability (-1º to 48º) with positive stops at 22.5º and 45º • Constant speed control enables a consistent smooth finish under load • Convenient guide rail compatible saw base interacts with optional guide rails to provide perfect, dead-on straight or bevel cutting without the need for an adapter

JR001GM101 / JR001GZ

40V max XGT® Brushless Reciprocating Saw • High cutting speed High / Low: 0 - 3,000 / 0 - 2,300 SPM) with 32mm stroke length provide high cutting efficiency • Massive cutting capacity with the ability to cut wood up to 255mm wide • Self-lubricating slider for increased durability • Blade ejection lever for convenient removal without having to touch the blade • Electric speed selector, high speed for wood cutting & low speed for metal cutting Kit includes: 1x 4.0Ah battery (BL4040), rapid charger (DC40RA) & carry case

JR002GM202 / JR002GZ

40V max XGT® Brushless AVT Reciprocating Saw • High cutting speed (0 - 3,000 SPM) with 32mm stroke length provide high cutting efficiency • Massive cutting capacity with the ability to cut wood up to 255mm wide • AVT counter weight mechanism reduces no load vibration to 8.5m/s2 • Change lever for Orbital action or straight cutting • Blade ejection lever for convenient removal without having to touch the blade Kit includes: 1x 4.0Ah battery (BL4040), rapid charger (DC40RA) & carry case

Kit includes:1x 4.0Ah battery (BL4040) & Charger (DC40RA)

Codes in these catalogue are correct at time of going to press, however specifications, runtime tests and models are subject to change without further notice.

makita.co.nz/products/XGT/ | 13

Featured model

GA013G

125MM 5" ANGLE GRINDER UP TO

40%

THAN THE 18V EQUIVALENT MODEL

Optional Accessories: 115-125mm Clip-On Cut-Off Wheel Guard Cover (199710-5)

GA005GM101 / GA005GZ

40V max XGT® Brushless 125mm (5”) Slide Switch Angle Grinder • Heavy duty power cutting 40% faster than the 18V equivalent model • High durability with advanced protection against heat and dust • Active feedback sensors shut down the tool in the event of a kickback • Enhanced safety features including an electric brake, soft start and anti-restart • Improved heat dissipation capacity allows for continuous heavy duty use

Optional Accessories: 125mm Tool- Less Dust Extraction Surface Grinding Shroud (191F81-2) 125mm Dust Extraction Cutting/Tuck Point Guard (191G06-2)

Optional Accessories: 115-125mm Clip-On Cut-Off Wheel Guard Cover (199710-5)

GA013GM101 / GA013GZ

40V max XGT® Brushless 125mm (5”) Paddle switch Angle Grinder • Heavy duty power cutting 40% faster than the 18V equivalent model • High durability with advanced protection against heat and dust • Active feedback sensors shut down the tool in the event of a kickback • Enhanced safety features including an electric brake, soft start and anti-restart • Improved heat dissipation capacity allows for continuous heavy duty use

GA023GZ

40V max XGT® Brushless AWS Capable 125mm (5”) Variable Speed Slide switch Angle Grinder • Variable speed control dial allows between 3,000 - 8,500rpm • High durability with advanced protection against heat and dust • Active feedback sensors shut down the tool in the event of a kickback • Enhanced safety features including an electric brake, soft start and anti-restart • Compatible with AWS* for wireless connectivity with compatible dust extraction * Requires optional wireless transmitter (198901-5)

Kit includes: 1x 4.0Ah battery (BL4040), rapid charger (DC40RA) and Makpac 4

14 |

Kit includes: 1x 4.0Ah battery (BL4040), rapid charger (DC40RA) and Makpac 3

Codes in these catalogue are correct at time of going to press, however specifications, runtime tests and models are subject to change without further notice.

Get Connected

Optional Accessories: 125mm Tool- Less Dust Extraction Surface Grinding Shroud (191F81-2) 125mm Dust Extraction Cutting/Tuck Point Guard (191G06-2)

GA035GZ

GA036GZ

40V max XGT® Brushless AWS Capable 125mm (5”) Variable Speed Slide Switch Angle Grinder

40V max XGT® Brushless 150mm (6”) Slide switch Angle Grinder

40V max XGT® Brushless 150mm (6”) Paddle switch Angle Grinder

• Variable speed control dial allows between 3,000 - 8,500rpm • High durability with advanced protection against heat and dust • Active feedback sensors shut down the tool in the event of a kickback • Enhanced safety features including an electric brake, soft start and anti-restart • Compatible with AWS* for wireless connectivity with compatible dust extraction

• Extreme performance with 8,500rpm no load speed • Toolless Wheel cover (Slide lever style) for easy adjustment and removal of wheel cover • Active feedback sensors shut down the tool in the event of a kickback • Enhanced safety features including an electric brake, soft start and anti-restart • Improved heat dissipation capacity allows for continuous heavy duty use

• Extreme performance with 8,500rpm no load speed • Toolless Wheel cover (Slide lever style) for easy adjustment and removal of wheel cover • Active feedback sensors shut down the tool in the event of a kickback • Enhanced safety features including an electric brake, soft start and anti-restart • Improved heat dissipation capacity allows for continuous heavy duty use

GA029GZ

* Requires optional wireless transmitter (198901-5)

DIAMOND BLADES UP TO Optional Accessories: 180mm Dust Extraction Surface Grinding Shroud (191X44-6) 230mm Dust Extraction Plunge Cutting Guard (198379-2)

GA037GM102 / GA037GZ

Optional Accessories: 180mm Dust Extraction Surface Grinding Shroud (195386-6) 230mm Dust Extraction Plunge Cutting Guard (198379-2)

40V max XGT® Brushless AWS Capable 230mm (9”) Paddle switch Angle Grinder

• Extreme performance with 7,800rpm no load speed • New Toolless re-designed Wheel cover for deeper cutting depth and easy installation • Active feedback sensors shut down the tool in the event of a kickback • Enhanced safety features including an electric brake, soft start and anti-restart • Compatible with AWS* for wireless connectivity with compatible dust extraction

• Extreme performance with 6,600rpm no load speed • New Toolless re-designed Wheel cover for deeper cutting depth and easy installation • Active feedback sensors shut down the tool in the event of a kickback • Enhanced safety features including an electric brake, soft start and anti-restart • Compatible with AWS* for wireless connectivity with compatible dust extraction

COMING SOON

PB002GZ

40V max XGT® Brushless Band Saw • High durability aluminium housing for stable cutting up to 127 mm (5”) • Constant speed control, blade speed remains constant under heavy load at • Brushless motor provides 0 - 3.2 m/min blade speed for rapid cutting speeds • Variable speed via trigger and dial for controlled cutting in various materials • Adjustable stopper plate for cutting close to walls and ceilings

*

LAST UP TO

*

6.5MM TALLER SEGMENTS*

GA038GM101 / GA038GZ

40V max XGT® Brushless AWS Capable 180mm (7”) Paddle switch Angle Grinder

Kit includes: 1x 4.0Ah battery (BL4040), rapid charger (DC40RA) and Carry Case

40% FASTER 4X LONGER

Kit includes: 1x 4.0Ah battery (BL4040), rapid charger (DC40RA) with LXT adaptor (ADP10), and Carry Case

COMING SOON

CS002GM101 / CS002GZ

40V max XGT® Brushless 185mm (7-1/4”) Metal Cutter • Comes w/185mm EFFICUT blade delivering 67mm cutting depth • Self-Dust collecting housing reduces scatter of metal chips • High performance cutting with 3,500rpm no load speed • Electric brake for fast yet gentle stopping of blade rotation • Twin LED Job light with after-glow function

TURBO

SEGMENTED CONTINUOUS

For Aggressive Cuts

For Smooth Cuts

For Precise Cuts

*Than competitor Diamond Blades

Full Range at: makita.co.nz/accessories/diamondblade/

COMING SOON

PV001GM101 / PV001GZ 40V max XGT® Brushless 180mm (7”) Polisher • • • • •

Variable speed control via trigger and pre-set dial Loop handle for comfort and control 940W Motor providing impressive 0-2,200rpm no load speed Constant speed control and soft start for smooth performance Elastomer bumper on gear housing for work piece protection Kit includes: 1x 4.0Ah battery (BL4040), rapid charger (DC40RA) and Carry Bag

Kit includes: 1x 4.0Ah battery (BL4040), rapid charger (DC40RA) and Makpac 3

Codes in these catalogue are correct at time of going to press, however specifications, runtime tests and models are subject to change without further notice.

makita.co.nz/products/XGT/ | 15

Featured model

TW001G

3/4" 4-SPEED IMPACT WRENCH

2,050 NM 3 modes of reaction time for automatic stop available both in forward and reverse rotation modes

16 |

4-speed power selection switch for a wide range of applications.

Codes in these catalogue are correct at time of going to press, however specifications, runtime tests and models are subject to change without further notice.

Makita-built motor delivers 1,800 N·m of max torque. and 2,050 N∙m of nut-busting torque

Get Connected

Optional Accessories: Extension handle set (191G67-2)

TD001GD104 / TD001GZ

40V max XGT® Brushless Impact Driver

• Heavy duty power with 220Nm max. torque • Precision fastening with enhanced anvil stability for less bit wobble • Optimised application selector with 6 modes adapting speed and impacts for each task • Single hand quick change trigger allows user to change between speeds and modes at the touch of a button • Constant speed control allows tool to operate at the same speed regardless of battery capacity

Optional Accessories: Extension handle set (191G67-2)

Optional Accessories: Extension handle set (191G67-2)

TW005GZ

TW004GD101 / TW004GZ

40V max XGT® Brushless Brushless 1/2” Impact Wrench with Detent Pin • High power in a compact design with 630Nm nut busting torque • 40V Max XGT battery continues to perform in continuous heavy duty application • Optimised application selector with 6 modes adapting speed and impacts for each task • Full speed mode shortens the distance of trigger travel required to hit full speed • 4 Stage power selection for optimum rpm and fastening torque

Optional Accessories: Extension handle set (191G67-2)

TW007GD101 / TW007GZ

TW008GZ

40V max XGT Brushless 1/2” Mid-Torque Impact Wrench with Detent Pin ®

• High power in a compact design with 1,100Nm nut busting torque • 40V Max XGT battery continues to perform in continuous heavy duty application • Optimised application selector with 6 modes adapting speed and impacts for each task • Full speed mode shortens the distance of trigger travel required to hit full speed • 4 Stage power selection for optimum rpm and fastening torque

• High power in a compact design with 630Nm nut busting torque • 40V Max XGT battery continues to perform in continuous heavy duty application • Optimised application selector with 6 modes adapting speed and impacts for each task • Full speed mode shortens the distance of trigger travel required to hit full speed • 4 Stage power selection for optimum rpm and fastening torque Kit includes: 1x 2.5Ah battery (BL4025), rapid charger (DC40RA) and Makpac 3

Kit includes: 1x 2.5Ah battery (BL4025), rapid charger (DC40RA) and Makpac 2

Optional Accessories: Extension handle set (191G67-2)

40V max XGT® Brushless 1/2" Impact Wrench with Square C-Ring

40V max XGT® Brushless 1/2” Mid-Torque Impact Wrench with Square C-Ring • High power in a compact design with 1,100Nm nut busting torque • 40V Max XGT battery continues to perform in continuous heavy duty application • Optimised application selector with 6 modes adapting speed and impacts for each task • Full speed mode shortens the distance of trigger travel required to hit full speed • 4 Stage power selection for optimum rpm and fastening torque

Optional Accessories: Extension handle set (191G67-2)

TW001GD103 / TW001GZ 40V max XGT® Brushless 3/4” Impact Wrench with Square C-Ring • Heavy duty power with 2,050Nm nut busting torque • High durability construction with battery vibration suppression protecting the battery • Optimised application selector with 6 modes adapting speed and impacts for each task • Full speed mode shortens the distance of trigger travel required to hit full speed • 4 Stage power selection for optimum rpm and fastening torque Kit includes: 1x 2.5Ah battery (BL4025), rapid charger (DC40RA) and Makpac 3

Kit includes: 1x 2.5Ah battery (BL4025), rapid charger (DC40RA) and Makpac 3

IMPACT SOCKETS

E-10394 // SOCKET SET METRIC W/ STANDARD SA B-54645 // 1/2” Impact Socket Set - 9pcs

B-54651 // 3/8” Impact Socket Set - 9pcs B-52308 // 14 PC. 1/2" Drive Deep Well Impact Socket Set

E-10372 // 50mm SOCKET ADAPTOR

More Accessories Available at: www.makita.co.nz /accessories/fastening/

Codes in these catalogue are correct at time of going to press, however specifications, runtime tests and models are subject to change without further notice.

makita.co.nz/products/XGT/ | 17

Featured model

HP001G

13MM HAMMER DRIVER-DRILL

MORE POWER AND CONTROL

DF001GD103 / DF001GZ

40V max XGT Brushless Driver-Drill ®

• Heavy duty power with 141Nm peak torque • Active feedback sensors shut down the tool in the event of a kickback • Massive drilling capacity with 152mm hole saw & 50mm auger bit capacity • 20% faster drilling speed compared with the equivalent 18V model • Electronic clutch for selecting between 41 torque range settings

HP002GZ 40V max XGT® Compact Brushless Hammer Driver-Drill • 65Nm Max lock torque and Lightweight at 1.31kg skin tool • Mechanical 2 speed gearing with all metal gear construction • Electronic clutch for selecting between 21 torque range settings • XPT technology that protects against dust & moisture • Twin LED Job light with after-glow function

DF002GZ 40V max XGT® Compact Brushless Driver-Drill • 65Nm Max lock torque and Lightweight at 1.31kg skin tool • Mechanical 2 speed gearing with all metal gear construction • Electronic clutch for selecting between 21 torque range settings • XPT technology that protects against dust & moisture • Twin LED Job light with after-glow function

Kit includes: 1x 2.5Ah battery (BL4025), rapid charger (DC40RA) and Makpac 3

18 |

Codes in these catalogue are correct at time of going to press, however specifications, runtime tests and models are subject to change without further notice.

Get Connected

LAST UP TO

90X LONGER

*

THAN STANDARD BITS DA001GM101 / DA001GZ

HP001GD103 / HP001GZ

40V max XGT® Brushless Right Angle Drill

40V max XGT® Brushless Hammer Driver-Drill E-10497 // Impact XPS ® 60 Pc. Impact Bit Set

• Heavy duty power with 141Nm peak torque • Active feedback sensors shut down the tool in the event of a kickback • Massive drilling capacity with 152mm hole saw & 50mm auger bit capacity • 35% faster drilling speed compared with the equivalent 18V model • Electronic clutch for selecting between 41 torque range settings

E-10475 // Impact XPS ® 35 Pc. Impact Bit Set

More Accessories Available at: www.makita.co.nz/solutions/impactxps.lsd

• Massive drilling capacity with up to 159mm hole saw capacity • Automatic Torque Drive increases torque to power through any task • 136Nm of max torque with a torque limiter reducing kickback if the bit binds • High durability 13mm keyed chuck for secure bit retention • 2 speed mechanical clutch for high speed and high torque applications Kit includes: 1x 4.0Ah battery (BL4040), rapid charger (DC40RA) & carry case

Kit includes: 1x 2.5Ah battery (BL4025), rapid charger (DC40RA) and Makpac 2

COMING SOON

COMING SOON

COMING SOON

KP001GM101 / KP001GZ 40V max XGT® Brushless AWS Capable 82mm (3”) Planer • 82mm width and up to 4mm depth with 25mm rebate planing capacity • Auto-start Wireless System (AWS) for on demand dust extraction* • Powerful 1,100 W motor delivers high capacity with 15,000rpm no load speed • Left or right side chip ejection • Electric brake & foot on base plate protect workpiece from damage

RT001GZ02

40V max XGT® Brushless Variable Speed AWS® Laminate Trimmer • On/off switch with safety lock and variable speed • Aluminium base with accurate rack and pinion depth adjustment • 10,000 - 31,000 rpm no load speed for a clean professional finish • LED job light for improved visibility • AWS connects to compatible vacuum cleaner with Bluetooth

Kit includes: 1x 4.0Ah battery (BL4040), rapid charger (DC40RA) & and Makpac 3

COMING SOON

FN001GD102 / FN001GZ

40V max XGT® Brushless 18Ga 40mm Brad Nailer • Rapid fire 18Ga brad nails between 15-40mm thanks to 40V Max Brushless motor • Counterweight mechanism offsets rebound force for a high quality finish • Spring drive motor delivers up to 5,000 nails runtime on a 2.5Ah battery • Depth driving adjustment for ideal sinking dept

PT001GZ

40V max XGT® Brushless 23Ga 35mm Pin Nailer • • • • • • •

Accepts 15-35mm length nails Low reaction force mechanism for easier handling Redesigned spring drive mechanism Up to 6000 shots on a fully charged 2.5Ah BL4025 Anti dry-fire mechanism and easy to see slim nose LED job light for improved visibility XPT technology that protects against dust & moisture

RT001GD102 / RT001GZ05 (SKIN TOOL)

40V max XGT® Brushless Variable Speed AWS® Laminate Trimmer (2.5Ah) Kit • On/off switch with safety lock and variable speed • Aluminium base with accurate rack and pinion depth adjustment • 10,000 - 31,000 rpm no load speed for a clean professional finish • LED job light for improved visibility • AWS connects to compatible vacuum cleaner with Bluetooth Kit includes: (196613-4) Trimmer base set, (196094-2) Plunge base set 1x 2.5Ah battery (BL4025), rapid charger (DC40RA) & carry case

NEW RELEASE

AS001GA101 / AS001GZ

40V max XGT® Brushless Dust Blower • Powerful 720km/h air speed With Nozzle 7 (in mode 4) • With a variety of tip nozzles, this model can meet a wide range of applications from professional use to home use, such as various blow-off works, filter cleaning, inflation and deflation of inflatable toys and more • 4 stage air volume; selectable according to your application Kit includes: 1x 2.0Ah batteries (BL4020), Charger (DC40RC)

Kit includes: 1x 2.5Ah battery (BL4025), rapid charger (DC40RA) and Makpac 3

Codes in these catalogue are correct at time of going to press, however specifications, runtime tests and models are subject to change without further notice.

makita.co.nz/products/XGT/ | 19

Featured model

UX01G

UP TO

COUPLE SHAFT

25% MORE

POWER THAN PETROL COUPLE SHAFT HEAD* *Compared to EX2650LH

Compatible with a variety of Makita couple shaft attachments for various applications.

20 |

The Lever-Style Lock System allows for quick tool-less installation, letting you switch between applications with ease.

Codes in these catalogue are correct at time of going to press, however specifications, runtime tests and models are subject to change without further notice.

Makita-built brushless motor delivers power of 30cc Petrol string trimmer.

Get Connected

UR003GM201 / UR003GZ

UR002GM201 / UR002GZ

UR008GM201 / UR008GZ01

40V max XGT® Brushless Loop Handle Line Trimmer

40V max XGT® Brushless Loop Handle Line Trimmer

40V max XGT® Brushless Bike Handle Brush Cutter

• 3 stage speed control up to 6,500rpm with reverse switch

• 3 stage speed control up to 6,500rpm with reverse switch

• 3 stage speed control up to 6,500rpm with reverse switch

• Powerful brushless motor provides 0.55kW of max power output

• Powerful brushless motor provides 0.55kW of max power output

• Automatic Torque Drive Technology increased torque under load

• Automatic Torque Drive Technology increases torque under bad load

• Automatic Torque Drive Technology increases torque under bad load

• Powerful brushless motor provides 0.55kW of max power output

• Active Feedback Technology protects against kickback

• Active Feedback Technology protects against kickback

• Active Feedback Technology protects against kickback

• IPX4 Rated for increased resistance to water

• IPX4 Rated for increased resistance to water

• Bike handle design for comfortable use and increased manoeuvrability

Kit includes: 2x 4.0Ah batteries (BL4040), rapid charger (DC40RA) with LXT adaptor (ADP10)

Kit includes: 2x 4.0Ah batteries (BL4040), Rapid Charger (DC40RA)

Kit includes: 2x 4.0Ah batteries (BL4040), rapid charger (DC40RA) with LXT adapter (ADP10)

NEW RELEASE

UR006GM201 / UR006GZ02

UR012GM201 / UR012GZ02

40V max XGT® Brushless Bike Handle Brush Cutter

80V max (40VX2) XGT® Brushless Bike Handle Brush Cutter

UB001GM101 / UB001GZ

• 3 stage speed control up to 7,000rpm with reverse function

• 3 stage speed control up to 6,400rpm with reverse function

• Cruise control function with boost mode

• Automatic Torque Drive Technology increased torque under load

• Automatic-torque Drive Technology increases torque under load

• Powerful air speed up to 230km/h / 565 CFM

• Powerful brushless motor provides 1.0kW of max power output

• Powerful brushless motor produces 2.0kW maximum output

• Lightweight design

• Active Feedback Technology protects against kickback

• Active feedback technology - prevents kickback when using a blade

• IPX4 Rated for increased resistance to water

• 430mm cutting width with nylon cord

• Easy to use control panel plus trigger operation

Kit includes: 2x 4.0Ah batteries (BL4040), rapid charger (DC40RA)

40V max XGT® Brushless Variable Speed Blower

• Up to 16m3/min of max air volume

Kit includes: 1x 4.0Ah battery (BL4040), rapid charger (DC40RA)

Kit includes: 2x 4.0Ah batteries (BL4040) & Dual Rapid Charger (DC40RB)

EM406MP

EM409MP

KR401MP

EE400MP

UB401MP

SW400MP

BR400MP

UX01GM106 / UX01GZ

40V max XGT® Brushless Multi-Function power head, Split shaft

PICK YOUR ATTACHMENT OPTIONAL

ACCESSORIES

• Powerful Brushless 52 Motor Enables to Work under Heavy Load • No Load Speed of 9,700rpm • 3 Speed selection (High/Medium/ Low) • Lever-Style Lock System allows easy Attachments change • Reverse switch to remove tangled grass • Compatible with a variety of Makita® Couple Shaft Attachments for various applications Kit includes: 1x 4.0Ah battery (BL4040), rapid charger (DC40RA)

EN420MP

EN410MP

EN420MP

Codes in these catalogue are correct at time of going to press, however specifications, runtime tests and models are subject to change without further notice.

EN401MP

EM407MP

LE400MP

makita.co.nz/products/XGT/ | 21

Featured model

CE001G UP TO

355 MM (14”)

127 M M

M A X C U T T ING C A PA CI T Y

80Vmax (40V X2) XGT battery and Brushless motor for increased cutting efficiency

22 |

Active Feedback sensing Technology (AFT) turns the motor off if rotation speed suddenly slows or wheel is

Codes in these catalogue are correct at time of going to press, however specifications, runtime tests and models are subject to change without further notice.

L.E.D. light for improved visibility and WetGuard: Excellent water-resistant performance

Get Connected

UH008GD101 / UH008GZ

40V max XGT® Brushless 600mm Hedge Trimmer • • • • •

Designed for precision trimming of dense hedges 3 stage speed control with reverse switch Max branch diameter of 21.5mm Low vibration design allows for maximum user comfort Rotating rear handle provides best grip whilst in use

• • • • •

UH005G

191R56-3 750mm Blade UH007G

COMING SOON

40V max XGT® Brushless 750mm Hedge Trimmer • Rotating rear handle can be adjusted 90 degrees left and right • Anti-vibration structure reduces vibrations transferred to the user • 23.5mm maximum cutting diameter • 3 stage variable speed control with blade release function • Premium sharp edge curve blade design

Designed for heavy duty pruning and shaping 3 stage speed control with reverse switch Max branch diameter of 25mm Low vibration design allows for maximum user comfort Rotating rear handle provides best grip whilst in use Kit includes: 1x 2.5Ah battery (BL4025), rapid charger (DC40RA)

Kit includes: 1x 2.5Ah battery (BL4025), rapid charger (DC40RA)

191R54-7 750mm Blade

UH005GD101 / UH005GZ

UH007GD101 / UH007GZ

40V max XGT® Brushless 750mm Hedge Trimmer

Kit includes: 1x 2.5Ah battery (BL4025), rapid charger (DC40RA)

191R57-1 600mm Blade

191R52-1 750mm Blade

UH008G

UH005G

191R52-1 750mm Blade UH007G

191R51-3 600mm Blade

199450-5 Hedge Trimmer gear grease

UH008G

*FOR A LIMITED TIME, CHECK INSTORE FOR DETAILS

GET 3 X FREE DIAMOND BLADES When you purchase 80V max 4.0ah Power Cutter Kit (CE001GL201)

GETDIAMOND1 XBLADEFREE

CE001GL201 / CE001GZ

80V max (40V X2) XGT® Brushless 14” 350mm Power Cutter • Active feedback sensors, shuts down the tool in the event of kickback • Advanced safety protection with the electric brake • Massive max. cutting depth of 127mm at a rapid 5,300rpm • XPT - increased protection against dust & moisture ingress • Optional Water supply adaptor for water suppression during masonry cuts

When you purchase 80V max 4.0ah Power Cutter Skin tool (CE001GZ)

E-12996 // 355mm x 25.4mm Diamond

UP TO

20% MORE CUTS*

DG001GM106 / DG001GZ06

40V max XGT® Brushless Earth Auger (Auger Drill Bit Sold Separately)

• • • • •

2 speeds for effective drilling into a variety of materials Compatible with petrol auger drill bits Max. drilling capacity of 200mm Reverse switch allows for easy removal from material Earth auger handle allows for maximum control while drilling

*Per Charge Compared to Competitor Blades

Kit includes: 2x 8.0Ah batteries (BL4080), Dual rapid charger (DC40RB) and 2 x LXT adapters (ADP10)

Kit includes: 1x 4.0Ah battery (BL4040), rapid charger (DC40RA)

COMING SOON

COMING SOON

UC004GM101 / UC004GZ

UC013GT101 / UC013GZ

40V max XGT® Brushless 14” 350mm Top Handle Chain Saw • 40Vmax XGT brushless motor provides chain speed of 0-1,490m/min • Additional safety & control with a kickback brake and metal bumper • Captive bar nut allows for efficient chainsaw maintenance • IPX4 for increased dust and moisture resistance • Large oil filling port with view window for easy oil level checks

40V max XGT® Brushless 18” 450mm Rear Handle Chain Saw • 40Vmax XGT brushless motor provides chain speed of (0 - 1,530 m/min) equivalent of 42cc petrol chainsaw • Variable speed trigger • Additional safety & control with a kickback brake and metal bumper • The unique design of SpeedCut Nano 80TXL increases saw cutting efficiency by as much as 15%.

• IPX4 for increased dust and moisture resistance • Large oil filling port with view window for easy oil level checks

Kit includes: 1x 4.0Ah battery (BL4040), rapid charger (DC40RA)

UA004GM101 / UA004GZ

40V max XGT® Brushless 12” 300mm Telescopic Pole Saw • Telescopic design provides high reach over 4m • Torque Boost Mode maximises output to power through thicker branches • Chain speed of 20.0 m/s (1,200 m/min) for fast smooth cutting • Integrated branch hook to easily remove cut branches • Slim saw head design for improved manoeuverability Kit includes: 1x 4.0Ah battery (BL4040), rapid charger (DC40RA)

Kit includes: 1x 5.0Ah battery (BL4050F), rapid charger (DC40RA)

Codes in these catalogue are correct at time of going to press, however specifications, runtime tests and models are subject to change without further notice.

makita.co.nz/products/XGT/ | 23

Featured model

VC004G

UP TO

15L L CLASS HEPA AWS

52% MORE

23 KPA MAXIMUM SEALED SUCTION* *Compared to DVC157L

Powerful BL™ Brushless motor delivers 1.8 m³/min Max Air Flow and 23 kPa Max Sealed suction

24 |

Up to 220 minutes of continuous run time on dial 1 and 28 mins minutes on high setting w 2 x 5.0Ah

Codes in these catalogue are correct at time of going to press, however specifications, runtime tests and models are subject to change without further notice.

Auto-start Wireless System (AWS) connects to power tool with Bluetooth

Get Connected

WET/DRY

DRY ONLY

CLEANUPS

L-CLASS

FAST CHARGING Optional Accessories: (191V67-2) Water Filter

A built-in fan circulates air between the charger and battery to cool the battery for faster charge time

Optional Accessories: (191V70-3) Powder filter HEPA and (191V68-0) Damper

MAX SEALED SUCTION CORDLESS

CORDLESS

VC003GLM22 / VC003GLZ01

40Vmax XGT® Brushless 15L Wet/Dry Vacuum Cleaner • Powered by two 40Vmax XGT batteries for high suction performance and longer runtime • Up to 220 minutes continuous runtime on dial 1 with 2x BL4050F • More Powerful max sealed suction at 23 kPa compared to our AC / Corded model also comes with Variable suction control dial for optimum suction and runtime • On board storage for pipes and accessories

VC004GLM22 / VC004GLZ03

40V max XGT® Brushless 15L HEPA AWS Dust Extraction Vacuum • Auto-start Wireless System (AWS) for on demand dust extraction • 3 stage HEPA filtration system for 99.97% filtration rate • Up to 220 minutes continuous runtime on dial 1 with 2x BL4050F • More Powerful max sealed suction at 23 kPa compared to our AC / Corded model also comes with Variable suction control dial for optimum suction and runtime • On board storage for pipes and accessories

Kit includes: 2x 4.0Ah batteries (BL4040), Rapid Charger (DC40RA)

Powerful 40Vmax XGT Brushless motor generates 1.8 m³/min of Max air flow / 23 kPa of Max sealed suction /265W of Suction power

LOWER NOISE Sound Pressure Level 53 dB(A) on low and Noise K Factor 2.5 dB(A)

Kit includes: 2x 4.0Ah batteries (BL4040), Rapid Charger (DC40RA)

VC003GLZ01

DVC155 (18V Comparison)

VC004GLZ03

DVC157 (18V Comparison)

3.2 m³/min

2.1m³/min

1.8 m³/min

2.1m³/min

23kPa

11kPa

23kPa

11kPa

Suction Power

310W / 265W

105W

205W

110W

Tank Size - Dry

15L

15L

15L

15L

Tank Size - Wet

12L

12L

--

--

Cloth Filter

Cloth Filter

3-Stage HEPA Filtration

3-Stage HEPA Filtration

--

---

Yes

Yes

Noise Level - on low

53 dB(A)

55 dB(A)

53 dB(A)

55 dB(A)

Noise Level - on High

67 dB(A)

64 dB(A)

67 dB(A)

64 dB(A)

8.1kg

7.3kg

8.3kg

7.7kg

Overall length

475mm

421mm

475mm

421mm

Voltage

40Vmax

18Vx2 (36V)

40Vmax

18Vx2 (36V)

Skin tool

VC003GLZ01

DVC155LZX1

VC004GLZ03

DVC157LZX2

Available Kit

VC003GLM22

--

VC004GLM22

--

Max. air flow Max. sealed suction

Filtration System Automatic Self Cleaning filter

Skin tool weight

Model #

Description

Includes

VC003GLM22

40Vmax XGT Brushless 15L Wet/Dry Vacuum Cleaner (4.0Ah) Kit

2 x 4.0Ah Batteries (BL4040), Rapid Charger (DC40RA), (140V42-5) Hose complete 38mm-2.5m, (140K01-3) Pipe 465 complete, (458184-2) Bending pipe, (199844-4) Joint Pipe set, (413B37-4 ) Multi Hook, (VAC-285) Black flat nozzle, (195432-5) 10pc Plastic dust bag and (144625-1) Cloth Filter

VC003GLZ01

40Vmax XGT Brushless 15L Wet/Dry Vacuum Cleaner, Tool Only

(140V42-5) Hose complete 38mm-2.5m, (140K01-3) Pipe 465 complete, (458184-2) Bending pipe, (199844-4) Joint Pipe set, (413B37-4 ) Multi Hook, (VAC-285) Black flat nozzle, (195432-5) 10pc Plastic dust bag and (144625-1) Cloth Filter

VC004GLZ03

40Vmax XGT Brushless 15L HEPA AWS Dry Dust Extraction Vaccuum (4.0Ah) Kit

(198901-5) AWS Chip, (195432-5) 10pk Plastic Tub Liner, (191V69-8) Pre filter, (195547-8) Front Cuff 22, (195546-0) Joint Cuff 24, (195433-3) 38mm Hose x 2.5m, (1955517) Floor Nozzle (192563-1) Straight Pipe, (192562-3) Bent Pipe, (410306-2) Corner Nozzle, (413B37-4) Multi hook and (451350-0) Stopper

VC004GLM22

40Vmax XGT Brushless 15L HEPA AWS Dry Dust Extraction Vaccuum, Tool Only

2 x 4.0Ah Batteries (BL4040), Rapid Charger (DC40RA),(198901-5) AWS Chip, (195432-5) 10pk Plastic Tub Liner, (191V69-8) Pre filter, (195547-8) Front Cuff 22, (195546-0) Joint Cuff 24, (195433-3) 38mm Hose x 2.5m, (1955517) Floor Nozzle (192563-1) Straight Pipe, (192562-3) Bent Pipe, (410306-2) Corner Nozzle, (413B37-4) Multi hook and (451350-0) Stopper

Codes in these catalogue are correct at time of going to press, however specifications, runtime tests and models are subject to change without further notice.

makita.co.nz/products/XGT/ | 25

Featured model

CF002G

13" 330MM JOBSITE FAN UP TO

240M/MIN ON HIGH SETTING (740 CFM)

CF001GZ

40V max XGT® 235mm 9-1/4" Fan • Automatic oscillating fan increases airflow dispersion • Powered by either 40V XGT batteries or AC power • 190m/min maximum air speed with 3 wind speed settings High / Medium / Low • Off timer function with 1,2 and 4 hour settings • Quiet running noise level of only 48dB due to redesigned fan blades

26 |

CF002GZ

40V max XGT® 330mm 13" Jobsite Fan • Automatic oscillating fan increases airflow dispersion • Powered by either 40V XGT batteries or AC power • 240m/min maximum air speed with 3 wind speed settings High / Medium / Low • Off timer function with 1,2 and 4 hour settings • Quiet running noise level of only 52dB due to redesigned fan blades

Codes in these catalogue are correct at time of going to press, however specifications, runtime tests and models are subject to change without further notice.

MP001GZ

40V max XGT® 161psi Inflator • • • • •

161psi maximum air pressure for inflating a wide variety of equipment Large digital backlit display, shows current and target air pressure Decompression function for reducing the current air pressure High discharge volume at 24L/min for fast inflation times Auto-stop function, inflator shuts down once target pressure is achieved

Get Connected

COMING SOON

5-YEAR WARRANTY XGT 40V CORDLESS SKINS LION

CL003GZ11

40V max XGT® Brushless 4-Speed HEPA Filter Cylcone Vacuum • • • • •

Integrated cyclone system for increased cleaning efficiency Lightweight at only 1.9kg HEPA filter provides high filtration rate of 99.97% Powerful max sealed suction of 20kPa 4 stage push button for optimal runtime & suction control

CL001GD129 / CL001GD118 / CL001GZ17 40V max XGT® Brushless 4-Speed HEPA Filter Vacuum • • • •

Lightweight at only 1.7kg with BL4025 HEPA filter provides high filtration rate of 99.97% Powerful max sealed suction of 21kPa 4 stage push button for optimal runtime & suction control

(Effective 1st April 2020) 5YR (Registered)* or 3YR (Non-registered)**

CL001GD118: 1x 2.5Ah battery (BL4025), rapid charger (DC40RA) CL001GD129 :1x 2.5Ah battery (BL4025) & Charger (DC40RC) and Cyclone pipelock (191D71-3)

COMING SOON

KT001GZ

40V max XGT® 800ml Kettle • Sleek modern shape and soft grip ergonomic handle • Dual layer insulation with Anti-spill lock button with removable lid • Max kettle capacity: 0.8 L/ 3.3cups and Power supply stand • Safety auto shut-off and boil dry protection • Boils up to 2.2L @ 23ºC (with BL4040 x 2)

MR002G

MR005G

40V max XGT® / 18V LXT / 12V CXTmax Bluetooth® Job Site Radio

40V max XGT® / 18V LXT / 12V CXTmax Bluetooth® Woofer Job Site Radio

• Audio Modes: AM & FM radio frequencies • High quality sound with 2 large 89mm speakers • Durable design with an IP65 rating protection against dust and water • Powered by 40V Max, 18V, 12V Max or AC Power • Runtime up to 27.5 hours with an optional 40V Max 4.0Ah battery (BL4040)

• Premium sound quality for an enhanced audio experience • Equipped with Bluetooth® to wirelessly connect your mobile device to play music • Menu controls to set FM mono/stereo, clock settings, volume and snooze • One auxiliary port for MP3 compatibility and one USB port for charging your mobile device

COMING SOON

ML001G

40V max XGT® L.E.D. Flashlight | 160Lm • 12 Position pivoting flashlight head swivels from 0 to 170 degrees • 34hrs of continuous illumination/runtime on a 2.5Ah battery • 4x 0.5W LEDs provide brightness of 160lm

ML002G

40V max XGT® L.E.D. Work Light and Torch | 710Lm • • • • •

360 degree illumination with 20 bright white LED’s Up to 32hrs runtime on a 2.5Ah battery 20 x 2W LED produces 710lm of brightness USB output port, able to charge mobile devices with 2.1A max 3 stage LED brightness switch, full, half or single LED

ML006G

40V max XGT® L.E.D. Flashlight | 500Lm • 7 positive stops and rotates left to right for multiple lighting angles • Up to 82 hours of continuous illumination in low mode with BL4040 • Extra Bright 18 LED Flashlight Provides 500 Lumens

COMING SOON

ML007G

40V max XGT® L.E.D. Flashlight/Spotlight | 1,250Lm • Long beam distance lights up objects up to 640 metres away • 4 output modes; spot light, flood light, spot/flood and strobe • High brightness neutral white LED’s provide a maximum 1,250lm • Continuous runtime up to 22hours with a BL4080F in spotlight mode

ML003G

40V max XGT® / 18V LXT LED Worklight | 1,100 Lm • High brightness white LED’s provide 1,100 Lumen of brightness • Powered 40Vmax XGT or 18V LXT Batteries • High durability IP56 rated for protection against water and dust • Runtime of up to 10 hours on high / 22 hours on low when powered by optional 4.0Ah battery • Head pivots 240° for optimal light angle direction

Codes in these catalogue are correct at time of going to press, however specifications, runtime tests and models are subject to change without further notice.

CW001GZ01

40V max XGT® / 18V LXT Cooler/Warmer 20 Litre AC/DC • Efficient cooling temperatures between 10°C and -18°C and warming to 60°C • Powered by a single 18V LXT battery, 12V car adaptor or AC power • Large 20 L capacity; Store up to four 2 L plastic bottles or twenty 500 mL plastic bottles • Highly durable design with IPX4 water resistance and enclosed battery compartment

makita.co.nz/products/XGT/ | 27

A NEW SYSTEM OF EQUIPMENT & TOOLS

+ 90 PRODUCTS

*

XGT SYSTEM ®

*By end of 2022

For order request code: XGTCAT | Copyright © 2022 Makita New Zealand Ltd. All Rights Reserved.

www.makita.co.nz