Makita New Product Release January - March 2022

Page 1

NEW PRODUCT RELEASE

JAN - MAR 2022 GET CONNECTED | WWW.MAKITA.CO.NZ |


NEW PRODUCT RELEASE

HR007GZ (TOOL ONLY) 40Vmax XGT BRUSHLESS 28MM ROTARY HAMMER | D-HANDLE SDS-PLUS ®

The 40V max XGT® Brushless 28mm ROTARY HAMMER is a cordless concrete solution designed for heavy-load applications. It delivers the power, speed, and run-time for corded demands, without the cord. The Makita-built brushless motor delivers a full 3.0J of impact energy, with 0 - 980 RPM and 0 - 5,000 BPM. The HR007G equipped with Auto-Start Wireless System (AWS®), which uses Bluetooth™ technology for wireless power-on/ off communication with the AWS-equipped tool (Wireless Transmitter sold separately). It features Active Feedback-Sensing Technology (AFT®), which electronically turns off the motor if the rotation of bit is suddenly forced to stop, and Anti-Vibration Technology (AVT®) for reduced vibration. More than just a padded handle, AVT is an internal counterbalance that uses air pressure to move counterweight pistons in the opposite direction of the drive piston to actively reduce vibration. In addition, the vibration-absorbing back handle and side handle further reduce vibration. For added durability in harsh job site conditions, Extreme Protection Technology (XPT™) is engineered for improved dust and water resistance. IMPACT ENERGY 3.0J CAPACITY MASONRY: 28MM | STEEL: 13MM WOOD: 32MM | CORE BIT: 54MM NO LOAD SPEED (RPM) 0 - 980 BLOWS PER MINUTE (BPM) 0 - 5,000 DIMENSIONS 456 X 101 X 185 MM WEIGHT 3.8 KGS

CONTROL

3-mode operation for “Rotation Only”, “Hammering with Rotation” or “Hammering Only” for multiple applications

makitasales@makita.co.nz 2 |

PERFORMANCE

Active Feedback sensing Technology AFT® electronically turns off the motor if rotation of bit is suddenly forced to stop

CORDLESS INNOVATION

OPTIONAL ACCESSORIES  DX15 Dust Extractor Attachment with HEPA Filter Cleaning Mechanism

CONVENIENCE

 198901-5 AWS Auto‑Start Wireless Transmitter

Auto-Start Wireless System (AWS®) utilizes Bluetooth® technology for wireless power-on/off communication between tool and dust extractor

DESIGN

Torque limiting clutch engineered to prevent gear damage by automatically disengaging gears during a bind-up situation

FOLLOW US ON Makita New Zealand

www.makita.co.nz Get Connected


NEW PRODUCT RELEASE

8.0 CE001GL201

1

CE001GZ (TOOL ONLY)

40Vmax X2 (80VMAX) XGT® BRUSHLESS 355 MM POWER CUTTER The 40V max X2 (80Vmax) XGT® Brushless 355 mm Power Cutter has the power to cut through various materials with all the benefits and convenience of cordless operation. The CE001G has a maximum cutting depth of 127mm and it’s Makita built brushless motor delivers 5,300 RPM of cutting speed. The 40V max X2 (80Vmax) XGT® Brushless 355 mm Power Cutter features Active Feedback-sensing Technology (AFT®) that turns the motor off if the rotation of the wheel is suddenly forced to stop. An electric brake stops the wheel in 4 seconds or less allowing for faster re-positioning and Makita’s Extreme Protection Technology (XPT™) is designed to improve a tool’s operation in harsh conditions by channelling water and dust from key internal components.

3 BONUS BLADES

CE001GL201 INCLUDES: CE001GZ 40Vmax X2 (80Vmax) XGT® Brushless 355mm Power Cutter, 2 x BL4080 40V max XGT® 8.0Ah Battery, DC40RB 40V max XGT® Dual Port Fast Charger, 2 x ADP10 18V LXT® Adapter for XGT® Chargers.

E-12996 SEGMENTED DIAMOND BLADE

WITH PURCHASE OF CE001GL201 KITS FOR A LIMITED TIME

WHEEL DIAMETER 355 MM MAX CUTTING CAPACITY 127 MM NO LOAD SPEED (RPM) 5,300 DIMENSIONS 786 X 272 X 433 MM WEIGHT 12.3 KGS

E-12996 SEGMENTED DIAMOND BLADE

WITH PURCHASE OF CE001GZ FOR A LIMITED TIME

(SKIN ONLY)

OPTIONAL ACCESSORIES  E-12996 Segmented Diamond Blade

PERFORMANCE

The BL™ Brushless Motor powered by two 40V max XGT® eliminate the hassle of engine pull starts

www.makita.co.nz

 E-12790-5 Cut Off Wheel | 5pcs

CAPACITY

Makes single pass cuts up to 127mm in various materials

 988 394 610 Pressurised Water Tank

DESIGN

Integrated water delivery continuously feeds water to reduce dust in concrete cutting applications

CONTROL

Active Feedback-sensing Technology (AFT®) that turns the motor off if the rotation of the wheel is suddenly forced to stop

CORDLESS INNOVATION

| 3


NEW PRODUCT RELEASE

RT001GZ02 (TOOL ONLY) 40Vmax XGT BRUSHLESS VARIABLE SPEED AWS® LAMINATE TRIMMER ®

The 40V max XGT® Brushless Variable Speed AWS® Laminate Trimmer is engineered for a full range of cabinetry and woodworking applications. It has a variable speed control dial 10,000 – 31,000 RPM to match the speed to the application, with electronic speed control to maintain constant speed under load and a soft start feature for smoother start-ups and better accuracy. Convenience features Makita’s Auto-start Wireless System (AWS®) utilizes Bluetooth® technology for wireless power-on/off communication between tool and Vacuum Cleaner, smooth rack-and-pinion fine depth adjustment system for more precise settings, dual L.E.D. lights to illuminate the work surface, and a quick-release cam lock system for convenient depth adjustments and base removal/installation. It features Makita’s Extreme Protection Technology, XPT™ is a protective seal inside the tool and is engineered for improved operation in harsh conditions by channelling water and dust from key internal components. COLLET CAPACITY NO LOAD SPEED (RPM) PLUNGE CAPACITY DIMENSIONS WEIGHT

6-8 MM 10,000 - 31,000 TRIMMER BASE: 0 - 40 MM | PLUNGE BASE: 0 - 35 MM

124 X 89 X 197 MM 2.2 KGS OPTIONAL ACCESSORIES

 195563-0 Plunge Base Set

 198987-9  122965-7 Tilt base Straight guide

CONVENIENCE

Dua LED job lightsl for improved visibility

4 |

CORDLESS INNOVATION

DESIGN

Smooth rack-and-pinion fine depth adjustment system for more precise settings

 196612-6 Laminate Trimmer base

DURABILITY

 194733-8 Dust extraction nozzle

Aluminum housing and base for increased durability and accuracy

 198901-5 AWS Auto‑Start Wireless Transmitter

CONTROL

Variable speed control dial (10,000 - 31,000 RPM) to match the speed to the application

Get Connected


NEW PRODUCT RELEASE

VC004GLM22

VC004GLZ03 (TOOL ONLY)

40Vmax XGT BRUSHLESS 15L HEPA AWS® DUST EXTRACTION VACUUM ®

The 40V max XGT® Brushless 15L HEPA AWS® Dust Extraction Vacuum features a powerful Makita-built BL™ Brushless Motor that delivers 23 kPa of Max sealed suction and 1.7 m³/min of Max airflow. Equipped with Makita’s Auto-start Wireless System (AWS®) utilizes Bluetooth® technology for wireless power-on/ off communication between tool and Vacuum Cleaner. The 40V max XGT® Brushless 15L HEPA AWS® Dust Extraction Vacuum features An oversized on-off switch, variable speed control dial, and dual L.E.D. battery indicators. The 40V max XGT® Brushless 15L HEPA AWS® Dust Extraction Vacuum is equipped with Makita’s Extreme Protection Technology, XPT™ is a protective seal inside the tool and is engineered for improved operation in harsh conditions by channelling water and dust from key internal components.

AWS® is intelligent communication that wireless power-on/off between tool and Dust extractor for improved efficiency.

VC004GLM22 INCLUDES: VC004GLZ01 40V max XGT® Brushless 15L HEPA AWS® Dust Extraction Vacuum, 2 x BL4040 40V max XGT® 4.0Ah Batteries, DC40RA 40Vmax XGT® Charger. CAPACITY MAX AIR FLOW MAX SEALED SUCTION DIMENSIONS WEIGHT

DUST: 15 L 1.8 M³/MIN 23 KPA 366 X 334 X 475 MM 8.5 - 10.4 KGS STANDARD ACCESSORIES

 195551-7 T-NOZZLE SET 38  195433-3 HOSE COMPLETE 28-3.5 SET

 192562-3 BENT PIPE

 198901-5 AWS Chip

 451350-0 STOPPER

 192563-1 STRAIGHT PIPE SET 565-38

 195432-5 10pcs Disposal bag

EFFICIENCY

Efficient three stage HEPA filtration system captures 99.97% of particulates .3 microns and larger

www.makita.co.nz

 410306-2 CORNER NOZZLE

CONVENIENCE

AWS® for wireless power-on/off communication with dust extractor

OPTIONAL ACCESSORIES  195547-8 FRONT CUFF 22 SET  195546-0 FRONT CUFF 24 SET  191V69-8 Pre Filter

POWER

 191V68-0 Damper  191V70-3 Powder Filter HEPA

Powerful BL™ Brushless motor delivers 23 kPa of Max sealed suction and 1.7 m³/min of Max airflow

DESIGN

Filter cleaning system is designed to maintain optimal suction efficiency and longer filter life

CORDLESS INNOVATION

| 5


NEW PRODUCT RELEASE

VC003GLM22

VC003GLZ01 (TOOL ONLY)

40Vmax XGT BRUSHLESS 15L WET/DRY VACUUM CLEANER ®

The 40V max XGT® Brushless 15L Wet/Dry Vacuum Cleaner gives you the vacuum performance equivalent of corded models without the limits of a corded unit. The VC003G features a Makita-built BL™ Brushless Motor that delivers 23 kPa of Max sealed suction and 3.0 m³/min of Max airflow. An oversized on-off switch, variable speed control dial, and dual L.E.D. battery indicators. The 40V max XGT® Brushless 15L Wet/Dry Vacuum Cleaner is equipped with Makita’s Extreme Protection Technology, XPT™ is a protective seal inside the tool and is engineered for improved operation in harsh conditions by channelling water and dust from key internal components. VC003GLM22 INCLUDES: VC003GLZ01 40V max XGT® Brushless 15L Wet/Dry Vacuum Cleaner, 2 x BL4040 40V max XGT® 4.0Ah Batteries, DC40RA 40V max XGT® Charger. CAPACITY MAX AIR FLOW MAX SEALED SUCTION DIMENSIONS WEIGHT

DUST / WATER: 15 / 12 L 3.2 M³/MIN 23 KPA 366 X 334 X 475 MM 8.3 - 10.2 KGS OPTIONAL ACCESSORIES

STANDARD ACCESSORIES

 140K01-3 PIPE 465 COMPLETE

 199844-4 JOINT PIPE SET

 458184-2 BENT PIPE

 VAC-285 Flat Nozzle Black

 140V42-5 HOSE COMPLETE 38-2.5

 195432-5 10pcs Disposal bag

POWER

Powerful BL™ Brushless motor delivers 23 kPa of Max sealed suction and 3.0 m³/min of Max airflow

6 |

RUN TIME

Up to 220 minutes of continuous run time using two XGT® 5.0Ah batteries

CORDLESS INNOVATION

 144625-1 Cloth Filter

CONVENIENCE

 191V67-2 Water Filter

Quiet operating sound level of 67 dB(A) on high setting

DESIGN

Oversized on-off switch for operator convenience

Get Connected


NEW PRODUCT RELEASE

2.0 AS001GA101

AS001GZ (TOOL ONLY)

40Vmax XGT® BRUSHLESS DUST BLOWER The Makita® 40V max XGT® Brushless Dust Blower is a compact clean-up tool perfect for the job sites and workshops. With a One-touch easy nozzle tip replacement and wide range of nozzle tips The AS001G is the solution from professional use to home use. 40V max XGT® Brushless Dust Blower features Variable speed control trigger and 4 stage Air volume selector. The 40V max XGT® Brushless Dust Blower weighs just 1.5Kg (with battery) with a compact design at 182mm long and equipped with Lock-on switch for reduced operator fatigue. AS001GA101 INCLUDES: AS001GZ 40Vmax XGT® Brushless Dust Blower, BL4020 40V max XGT® 2.0Ah Battery, DC40RC 40V max XGT® Charger. AIR VOLUME AIR VELOCITY MAX CONTINUOUS RUN TIME DIMENSIONS WEIGHT

0 - 1.1 M³/MIN 0 - 200 M/S 50 MINS (BL4040) 175 X 94 X 248 MM 1.5 KGS

STANDARD ACCESSORIES  191X17-9 Pinch Vavle Nozzle

 191X19-5 Wide Range Nozzle

 191X15-3 Nozzle 13

 191X11-1 Nozzle 3

OPTIONAL ACCESSORIES  191X21-8 Flexible nozzle

 191X23-4 Air Vent Hose

 191X13-7 Nozzle 7

CONVENIENCE

One-touch nozzle replacement

www.makita.co.nz

DESIGN

With a variety of tip nozzles, this model can meet a wide range of applications from professional use to home use

COMFORT

Lock-on switch for reduced operator fatigue

CONTROL

4 stage air volume; selectable according to your application

CORDLESS INNOVATION

| 7


NEW PRODUCT RELEASE

ML006G (TOOL ONLY) 40Vmax XGT® CORDLESS L.E.D. FLASHLIGHT | 500 LUMENS The 40V max XGT® Cordless L.E.D. Flashlight provides ultra-bright illumination, versatility, and convenience. At full brightness (18 LED), it provides 500 lumens of light. The threemode switch also provides delivers either 500 lumens in high mode, 250 lumens in medium mode or 100 lumens in low mode. The 40V max XGT® Cordless L.E.D. Flashlight delivers 20 hours of continuous illumination on a single charge on the full brightness 500Lm setting, and 82 hours on low brightness 100Lm setting. For added convenience, the flashlight head folds up and down and pivots left to right to deliver multiple lighting angles. A metal hanghook swivels 360-degrees and folds away when not in use. LUMINOUS FLUX HIGH: 500 | MED: 250 | LOW: 100 LUMENS CONTINUES RUN TIME UP TO 82 HOURS DIMENSIONS 354 X 109 X 79MM WEIGHT 1.1 KGS OPTIONAL ACCESSORIES

UP TO

82 HOURS OF ILLUMINATION

 GM00001326 Light Diffuser

W I T H

CONTROL

TECHNOLOGY

3-Mode on/off switch delivers either 500 lumens in high mode, 250 lumens in medium mode or 100 lumens in low mode

A

4 0 V

M A X

VERSATILITY

L.E.D. lights effectively illuminate work area without the high heat of halogens

Flashlight head folds up and down and rotates left to right for multiple lighting angles

X G T

®

4 . 0 A H

B AT T E RY

DESIGN

Weighs only 1.1Kg for reduced operator fatigue

KT001GZ (TOOL ONLY) 40Vmax XGT KETTLE | 800ML ®

Smoko just got better with the 40V max XGT® KETTLE. Get boiling water for your coffee, tea or noodles on the jobsite without the need for an AC socket. The 40V max XGT® KETTLE is powered by 40V max XGT battery, it will boil 100ml of water in 1 minute and features an anti-spill lock button to minimize accidental spilling, a convenient lid with Anti-dust spout and Auto shut-off after boiling with warning buzzer. WATER TANK CAPACITY DIMENSIONS WEIGHT

800 ML 233 X 322 X 307 MM 2.8 - 5.9 KGS

BOIL UP TO W I T H

POWER

Powered by 40V max XGT® battery with the option to insert an additional battery for extended run time. 8 |

CORDLESS INNOVATION

2

X

4 . 0 A H

CONVENIENCE

Get boiling water anytime, anywhere

X G T

®

2.2L B AT T E R I E S

EFFICIENCY

Boil 100ml of water in 1 minute

DESIGN

Equipped with an anti-spill lock button to minimize accidental spilling. Auto shut-off after boiling with warning buzzer Get Connected


NEW PRODUCT RELEASE

CW001GZ01 (TOOL ONLY) 18V LXT | 40Vmax XGT® COOLER/WARMER 20 LITRE | AC/DC ®

C O M PAT I B L E

The 18V LXT® | 40V max XGT® Cooler/Warmer is a versatile unit with plenty of space for cooling or warming your food and drink. With an efficient cooling function, there are 7 preset internal temperature settings between -18°C and 10°C, and a warming function of 60°C. Built with a highly durable design the CW001G is IPX4 water-resistant with an enclosed battery compartment for keeping your batteries protected. Powered by a single 40Vmax XGT or 18V LXT battery there is also 2 battery terminals for increased runtime. When set at 5°C (normal fridge temperate) the cooler will run for up to 28 hours on 2x 5.0Ah 40Vmax XGT batteries. Not only is this unit powered by a 40Vmax XGT or 18V LXT battery there is also the option to power the 18V LXT® | 40V max XGT® Cooler/Warmer by a 12V automotive socket or AC power. Whether you are at the beach, in the park or on a Jobsite the CW001G is a must-have for your next adventure. CAPACITY 20 L COOLING CAPACITY -18 / -15 / -10 / -5 / 0 / 5 / 10°C WARMING CAPACITY 30 / 35 / 40 / 45 / 50 / 55 / 60°C POWER 40V / 18V / AC ADAPTER / CIGAR SOCKET CABLE DIMENSIONS 663 X 341 X 372 MM WEIGHT 13.8 KGS

ANYWHERE ANY TIME

STANDARD ACCESSORIES  WL00000121 AC Adapter

DESIGN

Compressor type cooling system keeps your food or drinks cool at 5 °C up to 28 hours.

www.makita.co.nz

 WL00000002 CIGAR LIGHTER DC 12-24V

 A-71093 SHOULDER BELT

CONVENIENCE

LED display conveniently displays temperature and battery levels

W I T H

EASY HAUL

Large 100 mm tough wheels run smoothly for easy transporting.

A

4 0 V

M A X

X G T

®

VERSATILITY

Built in USB port for charging mobile phone

CORDLESS INNOVATION

| 9


NEW PRODUCT RELEASE

UC004GM101

UC004GZ (TOOL ONLY)

40Vmax XGT BRUSHLESS 14” TOP HANDLE CHAIN SAW ®

Makita is meeting demand with an expanding line of cordless OPE, including the 40V max XGT® Brushless 14” Top Handle Chain Saw. With zero emissions, lower noise, and less maintenance than Petrol-powered chain saws, the UC004G is a welcome solution for cutting and trimming applications. The compact top-handle design makes it ideal for the professional tree care industry. Powered by 40V max XGT® for maximum power, speed and run-time, the 40V max XGT® Brushless 14” Top Handle Chain Saw is easy to start and features a variable speed trigger and high chain speed 0 - 1,490 m/min for increased cutting speed for cutting dense material. It has zero emissions and reduced maintenance: there’s no engine oil to change, no spark plug to replace, no air filter or muffler to clean, and there’s no need to drain the fuel for storage. With the Makita® Outer Rotor Brushless Motor with direct-drive system, users get high power efficiency. Other convenience features include adjustable automatic chain lubrication, built-on lock-off lever to help prevent the chain from accidentally engaging, an electric brake for maximum productivity, and more. UC004GM101 INCLUDES: UC004GZ 40Vmax XGT® Brushless 14” Top Handle Chain Saw, BL4040 40V max XGT® 4.0Ah Battery , DC40RA 40V max XGT® Rapid Charger GUIDE BAR LENGTH CHAIN PITCH OIL TANK CAPACITY DIMENSIONS WEIGHT

350 MM 3/8” 200 ML 266 X 194 X 227 MM 3.8 KGS

STANDARD ACCESSORIES

 165246-6 350mm Guide Bar

 196741-5 Chain 3/8”-0.43”

 199897-3 Oil Set

POWER

Makita-built Outer Rotor BL™ Brushless Motor direct-drive system provides power of a 30cc petrol chain saw 10 |

CORDLESS INNOVATION

CONVENIENCE

Captured bar nut is retained in sprocket cover for convenient setup and maintenance

INNOVATION

No petrol, emissions, oil mixing or pull starts with reduced maintenance and low noise levels

CONTROL

Variable speed trigger and high chain speed (0-3,940 FPM) for improved cutting performance Get Connected


NEW PRODUCT RELEASE

UA004GM101

UA004GZ (TOOL ONLY)

40Vmax XGT BRUSHLESS 300 MM (12”) TELESCOPIC POLE SAW ®

40V max XGT® Brushless 300 mm (12”) Telescopic Pole Saw is a welcome solution for a range of trimming and cutting applications. With zero emissions, lower noise and maximum versatility, the pole saw delivers maximum performance and run time without the hassles of petrol. The pole saw’s Telescopic extension pole adjustable in length from 2.5m to 3.8m provides extended reach perfect for pruning hard to reach branches. Other features include a branch hook, a translucent bar oil tank with a large opening, and Extreme Protection Technology (XPT™). XPT is a protective seal inside the tool, engineered for improved operation in harsh conditions by channelling water and dust from key internal components. UA004GM101 INCLUDES: UA004GZ 40Vmax XGT® Brushless 300 mm (12”) Telescopic Pole Saw, BL4040 40V max XGT® 4.0Ah Battery , DC40RA 40V max XGT® Rapid Charger

ACTIVE FEEDBACK-SENSING TECHNOLOGY (AFT®) ELECTRONICALLY TURNS OFF THE MOTOR IF ROTATION OF THE ATTACHMENT IS SUDDENLY FORCED TO STOP.

SAW CHAIN GAUGE: 1.1 - 1.3 MM | PITCH: 3/8” CHAIN SPEED 1,200 M/MIN GUIDE BAR LENGTH 300 MM OIL TANK CAPACITY 160 ML DIMENSIONS 2,516 - 3,748 X 156 X 187 MM WEIGHT 7.8 KGS

REACH OF UP TO 3.8M

POWER

Makita-built BL™ Brushless Motor delivers power of a 35cc petrol pole saw

www.makita.co.nz

CONVENIENCE

Captured bar nut is retained in sprocket cover for convenient setup and maintenance

CONTROL

Telescoping shaft easily adjusts from 2.5m to 3.8m allowing access to hard-to-reach branches

INNOVATION

No petrol, emissions, oil mixing or pull starts with reduced maintenance and low noise levels

CORDLESS INNOVATION

| 11


NEW PRODUCT RELEASE

DBO480Z (TOOL ONLY) 18V LXT PALM SANDER ®

The 18V LXT® Cordless 1/4” Palm Sander delivers increased efficiency and mobility to woodworkers. The 18V LXT® Cordless 1/4” Palm Sander features superior ergonomics and up to 14,000 OPM sanding speed for fast and smooth finish sanding, Match the speed to the application with two-speed settings (11,000 /14,000 OPM) which are easily changed with a one-touch electronic control switch. PAD SIZE ABRASIVE PAPER SIZE (MM) ORBITS PER MINUTE (OPM) DIMENSIONS WEIGHT

112 X 102 MM SQUARE: 114 X 102 | RECTANGULAR: 114 X 190 TRIANGULAR: 96 X 96

14,000 156 X 112 X 151 MM 1.7 KGS

STANDARD ACCESSORIES

OPTIONAL ACCESSORIES

 450770-5 Dust Box

 192352-4 Square Sanding paper 3pc set

 191Y23-0 Rectangular pad

 416063-0 Dust bag nozzle

 191Y22-2 Triangular pad

 192655-6 Triangular sanding paper 3pc Set

 166078-4 Dustbag

 416064-8 Dust nozzle

 191Y24-8 Square pad

SPEED

Two speed settings (11,000/14,000 OPM) engineered for faster material removal

12 |

COMFORT

Ergonomically designed body and grip for increased operator comfort

INNOVATION. SINCE 1915

CONVENIENCE

Conveniently located easy onehanded speed selector button allows for quick speed selection

DURABILITY

Dust / water-resistant construction (IP65 rated) for improved operation in harsh job site conditions

Get Connected


NEW PRODUCT RELEASE

DWD181ZJ (TOOL ONLY) 18V LXT CORDLESS MULTI‑SURFACE SCANNER ®

The 18V LXT® Cordless Multi-Surface Scanner quickly locates objects in multiple types of base materials to allow for immediate cutting, drilling or coring. It is capable of detecting a variety of embedded objects such as metal, wood, plastic, and shielded electrical wire up to 180mm deep. Select different modes to scan dry concrete, wet concrete, wood, drywall, and hollow block. The multi-detection mode allows for scanning in up to three parallel surface positions, this helps detect objects running diagonally. The large 4” illuminated interface displays centre, edge position, and relative width and depth of embedded objects. A laser guide assists with straight travel across the surface and provides a centre position of the sensor for increased accuracy. An L.E.D. light illuminates the scan zone for increased visibility in dark areas. The scanner is designed for use in demanding job sites. A rubberized over-mould, IP-54 rating and Extreme Protection Technology (XPT™) all provide increased durability. XPT™ is a protective seal inside the tool. It is designed to improve a tool’s operation in harsh conditions by channelling water and dust from key internal components. MAX DETECTION DEPTH (MM) METAL: 180 | PLASTIC / LIVE CABLE: 120 | WOOD: 25 MIN. DETECTABLE DISTANCE 40 MM OPERATING TEMPERATURE -10 - 40°C DIMENSIONS 288 X 118 X 108 MM WEIGHT 1.3 - 1.7 KGS

CAPACITY

Capable of detecting a variety of embedded objects up to 180mm deep

www.makita.co.nz

CONVENIENCE

Laser guide and LED light combine to allow for straight and clear travel across scanned surface

APPLICATIONS

Multi-detection mode; ideal for detecting objects running diagonally

DESIGN

Selectable base material modes allow for increased versatility

INNOVATION. SINCE 1915

| 13


NEW PRODUCT RELEASE

DUC122SF

DUC122Z

3.0 Ah BATTERY

(TOOL ONLY)

18V LXT® CORDLESS 115MM CHAIN SAW The Makita 18V LXT® Cordless 115 mm Chain Saw delivers maximum control and power, perfect for pruning trees or shrubs or cutting up garden waste. Its compact design allows it to have maximum access into tight spaces and weighing only 2.6kg with battery allows for long periods of use. The cutting speed makes for efficient cuts whilst the automatic chain oiling provides adequate lubrication for the task at hand. The tool-less chain tensioning adjustment allows for quick and efficient changing and tensioning of the chain. The tip guard & electric brake provide improved safety for the user. DUC122SF INCLUDES: DUC122Z 18V LXT® 115mm Chain Saw, BL1830B 18V LXT® 3.0Ah Battery, DC18SD 18V LXT® Standard Charger GUIDE BAR LENGTH CHAIN PITCH CHAIN OIL TANK VOLUME DIMENSIONS WEIGHT

115 MM 1/4” 80 ML 422 X 195 X 215 MM 2.6 KGS

STANDARD ACCESSORIES  158476-6 115mm Guide bar

 182229-1 Oil set

 791284-8 115mm Chain 1/4”-0.050”

POWER

Makita-built motor delivers 300 m/min for increased cutting speed

14 |

CONTROL

Compact top handle design ideal for pruning, trimming and limbing

INNOVATION. SINCE 1915

DESIGN

“Tool-less” chain adjustments for convenient operation and maintenance

INNOVATION

No petrol, emissions, oil mixing or pull starts with reduced maintenance and low noise levels

Get Connected


NEW PRODUCT RELEASE

DLM330Z (TOOL ONLY) 18V LXT CORDLESS 330MM LAWN MOWER ®

Makita is expanding the line of cordless outdoor power equipment to include the 18V LXT® Cordless 330mm LAWN MOWER. With zero emissions, lower noise and reduced maintenance, the 18V LXT® Cordless 330mm LAWN MOWER is a welcome solution for efficient grass cutting. Powered by 18V LXT Battery, its Makita-built motor delivers up to 4,300 RPM for faster cutting. the 18V LXT® Cordless 330mm LAWN MOWER’s lightweight and compact 330mm deck makes it highly maneuverable and ideal for small home gardens. The mower features 8 cutting height settings from 20 mm to 75 mm, a soft start provides smooth start-ups and longer gear life, ball bearings for a smoother drive and a rubberized soft grip handle for comfort. CUTTING WIDTH CUTTING HEIGHT GRASS BOX CAPACITY NO LOAD SPEED (RPM) DIMENSIONS WEIGHT

COMPACT DESIGN L I G H T W E I G H T

AT

1 1 . 6 K G

330 MM 20 - 75 MM 30 L 4,300 1,285 - 1,350 X 375 X 935 - 975 MM 11.6 - 12.5 KGS

STANDARD ACCESSORIES

 GB00000042 Bar Blade

POWER

Powerful Makita motor delivers 4,300 RPM for faster cutting

www.makita.co.nz

 GB00000067 Multing plug

CONVENIENCE

8 cutting height settings from 20 mm to 75 mm

DESIGN

Soft start for smooth start-ups and longer gear life

COMFORT

Ergonomic plastic deck weighs less for reduced required push force

INNOVATION. SINCE 1915

| 15


NEW PRODUCT RELEASE

DLM480CT2

DLM480Z

5.0 Ah BATTERY

(TOOL ONLY)

18V X2 (36V) LXT® CORDLESS 480MM LAWN MOWER Makita is expanding the line of cordless outdoor power equipment to include the 18V X2 (36V) LXT® Cordless 480mm LAWN MOWER. With zero emissions, lower noise and reduced maintenance, the 18V X2 (36V) LXT® Cordless 480mm LAWN MOWER is a welcome solution for efficient grass cutting. Its Makita-built motor delivers up to 3,100 RPM for faster cutting. The mower features 10 stage cutting height settings from 20 mm to 100 mm, a soft start provides smooth start-ups and longer gear life, ball bearings for a smoother drive and a rubberized soft grip handle for comfort. DLM480CT2 INCLUDES: DLM480Z 18V X2 (36V) LXT® Cordless 480mm Lawn Mower, 2x BL1850B 18V LXT® 5.0Ah Battery, DC18SH 18V LXT® Dual Port Standard Charger CUTTING WIDTH CUTTING HEIGHT GRASS BOX CAPACITY NO LOAD SPEED (RPM) DIMENSIONS WEIGHT

480 MM 20 - 100 MM 62 L 3,100 1,690 - 1,740 X 530 X 930 - 1,060 MM 24.5 KGS

POWER

CONVENIENCE

Powerful Makita motor delivers 3,100 RPM for faster cutting

DLM481CT2

10 cutting height settings from 20 mm to 100 mm

STANDARD ACCESSORIES  413946-5 Multing plug

DESIGN

Soft start for smooth start-ups and longer gear life

 191V97-3 Bar blade 2 teeth

INNOVATION

Ergonomic plastic deck weighs less for reduced required push force

5.0 Ah BATTERY

DLM481Z (TOOL ONLY)

18V X2 (36V) LXT CORDLESS 480MM SELF-PROPELLED LAWN MOWER ®

Makita is expanding the line of cordless outdoor power equipment to include the 18V X2 (36V) LXT® Cordless 480mm Self-Propelled LAWN MOWER. With zero emissions, lower noise and reduced maintenance, the 18V X2 (36V) LXT® Cordless 480mm Self-Propelled LAWN MOWER with a Self-propelled speed of 2.5-5.0km/h is a welcome solution for efficient grass cutting. Its Makita-built motor delivers up to 3,100 RPM for faster cutting. The mower features 10 stage cutting height settings from 20 mm to 100 mm, a soft start provides smooth start-ups and longer gear life, ball bearings for a smoother drive and a rubberized soft grip handle for comfort.

SELF-PROPELLED

DLM481CT2 INCLUDES: DLM481Z 18V X2 (36V) LXT® Cordless 480mm Self-Propelled Lawn Mower, 2x BL1850B 18V LXT® 5.0Ah Battery, DC18SH 18V LXT® Dual Port Standard Charger CUTTING WIDTH CUTTING HEIGHT GRASS BOX CAPACITY NO LOAD SPEED (RPM) DIMENSIONS WEIGHT

POWER

Powerful motor delivers 3,100 RPM for faster cutting 16 |

480 MM 20 - 100 MM 62 L 3,100 1,690 - 1,740 X 530 X 930 - 1,060 MM 27.1 - 29.3 KGS

CONVENIENCE

10 cutting height settings from 20 mm to 100 mm

INNOVATION. SINCE 1915

STANDARD ACCESSORIES  413946-5 Multing plug

DESIGN

Soft start for smooth start-ups and longer gear life

 191V97-3 Bar blade 2 teeth

INNOVATION

Variable Self-propelled speed of 2.5-5.0km/h Get Connected


NEW PRODUCT RELEASE

DML816 (TOOL ONLY) 18V LXT CORDLESS L.E.D. FLASHLIGHT | 500 LUMENS ®

18V LXT® Cordless L.E.D. Flashlight provides ultra-bright illumination, versatility, and convenience. At full brightness (18 LED), it provides 500 lumens of light. The three-mode switch also provides delivers either 500 lumens in high mode, 250 lumens in medium mode or 100 lumens in low mode. The 18V LXT® Cordless L.E.D. Flashlight delivers 17 hours of continuous illumination on a single charge on the full brightness 500Lm setting, and 75 hours on low brightness 100Lm setting when using an 18V LXT® 6.0Ah Battery. For added convenience, the flashlight head folds up and down and pivots left to right to deliver multiple lighting angles. A metal hang-hook swivels 360-degrees and folds away when not in use.

UP TO

75 HOURS OF ILLUMINATION

LUMINOUS FLUX 100 - 500 CONTINUES RUN TIME UP TO 75 HOURS DIMENSIONS 250 X 109 X 79 MM WEIGHT 0.7 KGS

W I T H

A

1 8 V

L X T

®

6 . 0 A H

B AT T E RY

OPTIONAL ACCESSORIES  GM00001326 Light Diffuser

CONTROL

TECHNOLOGY

3-Mode on/off switch delivers either 500 lumens in high mode, 250 lumens in medium mode or 100 lumens in low mode

Extra bright 18 L.E.D. flashlight provides 500 lumens

VERSATILITY

Flashlight head folds up and down and rotates left to right for multiple lighting angles

DESIGN

Weighs only 1.1Kg for reduced operator fatigue

DKT360Z (TOOL ONLY) 18V X2 (36V) LXT® KETTLE | 800ML Smoko just got better with the 18V X2 (36V) LXT® KETTLE. Get boiling water for your coffee, tea or noodles on the jobsite without the need for an AC socket. The 18V X2 (36V) LXT® KETTLE is powered by two 18V LXT® battery, it will boil 100ml of water in 1 minute and features an anti-spill lock button to minimize accidental spilling, a convenient lid with Anti-dust spout and Auto shut-off after boiling with warning buzzer. WATER TANK CAPACITY DIMENSIONS WEIGHT

800 ML 233 X 322 X 307 MM 2.7 - 3.4 KGS

BOIL

100ML IN 1 MINUTE

POWER

Boil 100ml of water in 1 minute

www.makita.co.nz

CONVENIENCE

Get boiling water anytime, anywhere

SAFETY

Dual layer structure of inner stainless layer and outer plastic layer provides high heat retention while keeping Kettle surface cool

DESIGN

Equipped with an anti-spill lock button to minimize accidental spilling. Auto shut-off after boiling with warning buzzer

INNOVATION. SINCE 1915

| 17


NEW PRODUCT RELEASE B-64842-5

B-64870-5

STARLOCK® OSCILLATING MULTI TOOL 24MM PLUNGE CUT BLADE | 5 PACK

STARLOCK® OSCILLATING MULTI TOOL 32MM PLUNGE CUT BLADE | 5 PACK

 Starlock® color coded interface for maximum product performance and ease in choosing the right blade  Recesses in furniture reqiring flat bottom edge  Plunge cuts in soft wood

 Starlock® color coded interface for maximum product performance and ease in choosing the right blade  Bi-metal construction with a Japanese tooth design for increased performance and a longer blade life  Bowed cutting edge increases cutting speed

EFFICUT METAL

CODE

The Makita EFFICUT Metal Saw Blade is the ideal accessory for Makita Cordless Metal or General Purpose Saws (sold separately). EFFICUT accessories are engineered to deliver optimal run times and performance. Get up to 80% more cuts per charge compared to standard blades. The EFFICUT Saw Blade has an ultra-thin kerf design that provides smoother cuts with less drag on the motor and minimal material loss. Featuring special ATAFR (Alternate Top Alternate Face w/ Raker) carbide tips, the saw blade can provide smoother and faster cuts. The blade is expertly tensioned for precision and true cutting. It is ideal for cutting pipe, angle iron, channel and more. ®

E-13057

• E-12061 • E-12871 • E-12887

DESCRIPTION EFFICUT METAL EFFICUT METAL EFFICUT METAL

SPEC 305mm x 63T 185mm x 45T 185mm x 60T

E-12996

EFFICUT COMPOSITE DECK 255MM X 75T

DIAMOND BLADE 350X25.4 SEGMENTED

 More cuts per charge compared to standard blades  Faster cutting compared to standard blades  Angled tip 5° for for easy, smooth cuts and longer life

 General purpose blade for use cutting concrete, block and brick  Segments are designed for longer life and faster cutting  Laser welded to ensure the strongest joint possible

E-12790-5

B-30128

CUT-OFF WHEEL 355 X 4.3 X 25.4 | 5/PK

BI METAL PORTABLE BAND SAW BLADE 10 TPI

 Up to 10% more cuts per charge and extra long life when used with 40V max X2 (80Vmax) XGT® Brushless 355 mm Power Cutter  Up to 10% faster than a 350mm x 4.0mm Cut-Off Wheel  Up to 40% longer life compared to 350mm x 4.0mm Cut-Off Wheel

 Bi-Metal construction for up to 3x longer life than carbon blades  10 TPI configuration ideal for use cutting materials up to 0.5mm thick  Makes clean, quick cuts in a variety of ferrous and non ferrous metals

EM407MP ROTARY SCISSOR ATTACHMENT FOR DUX18/60/UX01G  Designed to easily remove grass or weeds from a variety of surfaces  Low rotation speed minimizes throw on gravel/stone surfaces  Compatible with 18V LXT®, 18V X2 (36V) LXT® and 40V max XGT® Brushless Multi-Function Powerheads

LEVER STYLE LOCK SYSTEM FOR QUICK TOOL-LESS INSTALLATION

18 |

INNOVATION. SINCE 1915

Get Connected



makitasales@makita.co.nz

FOLLOW US ON Makita New Zealand

www.makita.co.nz


Turn static files into dynamic content formats.

Create a flipbook
Issuu converts static files into: digital portfolios, online yearbooks, online catalogs, digital photo albums and more. Sign up and create your flipbook.