Makita's 40Vmax XGT® Brushless Multi-Tool TM001GZ empowers tradespeople of all kinds to tackle a diverse range of applications with corded-like performance and the freedom of cordless convenience. Ideal for remodelers, carpenters, plumbers, wood floor installers, and general tradespeople, this 40Vmax XGT® multi-tool delivers exceptional power and precision. Featuring variable speed control (10,000 – 20,000 OPM) with soft-start functionality, users can seamlessly match the speed to the task at hand. Equipped with Anti Vibration Technology (AVT®), an internal counterbalance system that reduces vibration, the TM001GZ promotes enhanced comfort and control. Boasting a 3.6-degree oscillation angle, this multi-tool delivers faster, more aggressive cutting and sanding capabilities. Its small-diameter barrel grip and large on/off slide switch with lock-on button further contribute to improved handling and convenience.Leveraging the StarlockMax® System, a tool-less clamp design that enables rapid accessory installation, the 40Vmax XGT® Multi-Tool excels at cutting, sanding, scraping, grout removal, and a multitude of other applications when paired with Starlock® Max Oscillating Multi-Tool Accessories. TM001GZ features XPT (Extreme Protection Technology), a system of features that provides enhanced water and dust resistance, enabling operation in harsh jobsite environments.
Check out the full range of Makita Starlock and StarlockMax Multitool accessories at https://www.makita.co.nz/accessories/multitool/
Variable speed control dial (10,000-20,000 OPM) enables user to match the speed to the application DESIGN
Small diameter barrel grip for improved handling and added operator comfort
COMFORT Anti-Vibration Technology (AVT®) for up to 85% reduced vibration COMPATIBILITY
TW002GZ
40VMAX XGT® BRUSHLESS 1/2" HIGH-TORQUE IMPACT WRENCH | FRICTION RING
The 40Vmax XGT Brushless 1/2" High-Torque Impact Wrench with Friction Ring Anvil provides improved fastening control, ideal for automotive, installation, and fabrication trades.
The 40Vmax XGT Brushless 1/2" High-Torque Impact Wrench combines extended run time and speed control for unmatched fastening with a maximum of up to 1,700Nm of fastening torque and nut-busting performance of up to 2,200Nm. A Makita-built brushless motor powers the 40Vmax XGT Brushless 1/2" High-Torque Impact Wrench for superior efficiency, runtime, and durability. The TW002G is engineered with a smart electronic control that efficiently uses energy to match torque and RPM to the changing demands of the application. The Impact Wrench features a 4-speed power selection switch (0 - 1,800 / 1,000 / 900 / 850 RPM & 0 - 2,400/ 2,000/ 1,800/ 1,700 IPM) for precise fastening control in a wide range of applications.
Additional features include three forward and three reverse rotation auto-stop modes, a flexible joint that isolates the battery from the grip to help reduce wear on the battery contacts and Extreme Protection Technology (XPT), a protective seal inside the tool. It is designed to improve the tool’s operation in harsh conditions by channelling water and dust from key internal components.
STANDARD ACCESSORIES
346949-3 Belt hook
SPECIFICATIONS
SHANK | DRIVE SQUARE DRIVE 1/2"
MAX FASTENING TORQUE 1,700 N·M
MAX NUT-BUSTING TORQUE 2,200 N·M
DIMENSIONS 435 X 135 X 297 MM
WEIGHT 3.9 KG
PRODUCT FEATURES
POWER
BL™ Brushless Motor delivers 1,700 N·m of Fastening Torque and 2,200 N·m of Nut-Busting Torque
CONTROL
4-speed power selection for precise fastening control in a wide range of applications
INNOVATION
3 forward and 3 reverse Auto-Stop modes for increased efficiency
COMFORT
Weighs only 4.2 kg with a 4.0Ah battery for reduced operator fatigue (battery not included)
Check out the range of Makita 1/2" Drive Impact Sockets at https:// www.makita.co.nz/accessories/fastening-impactsocket/
PP001GZK
40VMAX XGT® BRUSHLESS HOLE PUNCHER
Punch holes in 9mm thick metal in under 3 seconds with the 40Vmax XGT® Brushless 20mm Hole Puncher, Tool Only (PP001GZK). The PP001GZK allows hole punching with complete cordless mobility. It can punch approx. 180 20MM diameter holes in 6mm thick steel with a 2.5Ah 40Vmax XGT Battery (sold separately). The punch stop mechanism automatically retracts the die once a punch is complete to quickly continue operation. For select applications, hole punching just became fast and effortless!
The ergonomic grip handle rotates 360°, allowing for optimal positioning in a variety of spaces. It features a rubberized soft grip for increased comfort on the job and a convenient side handle for additional support.
The PP001GZK is ideal for fabrication, HVAC, plumbing, electrical, mechanical and many more applications.
Check out the range of Makita hole punch accessories at www.makita.co.nz/accessories/misc-holepunch/
PRODUCT FEATURES
PORTABILITY
allows for complete cordless hole punching mobility without the cord
PRODUCTIVITY
Punch stop mechanism automatically retracts the die once a punch is complete
CAPACITY
Max outside diameter capacity of 20mm in general steel and 20mm in stainless steel
CONVENIENCE
Grip
UE001GZ
40VMAX XGT® BRUSHLESS GARDEN EDGER
Harness the power and performance of the 40Vmax XGT® Brushless Garden Edger UE001GZ, a cordless solution engineered to deliver exceptional results akin to 30cc class petrol-powered edgers.
The edger leverages a Makita-built brushless motor and 40Vmax XGT® Li-Ion battery to provide ample cutting power with a maximum no-load speed of 4,800rpm, complemented by a host of innovative features for enhanced precision, control, and user comfort. Boasting eXtreme Protection Technology (XPT) for high water-resistance in versatile outdoor use, the edger incorporates a new lock-off mechanism with a lock lever for improved work efficiency, while the guard offers greater visibility of the blade tip. Cutting depth can be easily adjusted by modifying the tire height, and a dedicated guard plate protects the gear case during maximum depth operations. Ergonomically designed with a comfortable loop handle, the edger also offers variable speed control, constant speed under load, active feedback sensing technology, soft start, and electric braking - equipping professionals with the tools needed to tackle even the most demanding edging tasks with uncompromising results.
UE001GZ features XPT (Extreme Protection Technology), a system of features that provides enhanced water and dust resistance, enabling operation in harsh jobsite environments.
Harness the power and precision of Makita's 40Vmax XGT® 600mm Brushless Hedge Trimmer UH021GZ, engineered to tackle even the most demanding trimming tasks with uncompromising efficiency. Developed as a compact, maneuverable solution ideal for small hedges and those with intricate curves, this hedge trimmer leverages a 40Vmax XGT Li-Ion battery to deliver smooth, highoutput performance that surpasses the capabilities of the DUH506 series. Boasting constant speed control to maintain consistent blade rotation, even under load, this trimmer ensures stable, seamless operation. Its high water-resistance, compatible with Makita's XPT (Extreme Protection Technology) system, allows for use in wet conditions, while a reverse function helps clear jammed branches. To further enhance user comfort, the lightweight aluminum guide bar and antivibration double-layered housing work in tandem to reduce fatigue. Complemented by an easy-press switch lever, anti-restart function, electric brake, and lock-off feature, the 40Vmax XGT® Hedge Trimmer embodies Makita's commitment to engineering professional-grade solutions that empower users to work with unparalleled efficiency and control.
STROKES PER MINUTE 4,200 MINˉ¹ NO LOAD SPEED 2,100 MINˉ¹ DIMENSIONS 1,048 X 207 X 185 MM WEIGHT 3.1 KG
PRODUCT FEATURES
COMFORT
Redesigned, easy-to-press switch lever allows activation from all sides of the handle
BLADE LENGTH 600MM
PERFORMANCE
Makita-built motor delivers 4,200 MINˉ¹ strokes per minute for increased cutting speed
1910T2-8 Chip receiver
UH020GD102 UH020GZ
40VMAX XGT® BRUSHLESS 500MM HEDGE TRIMMER
Harness the power and precision of Makita's 40Vmax XGT® 500mm Brushless Cordless Hedge Trimmer UH020GZ, engineered to tackle even the most demanding trimming tasks with uncompromising efficiency. Developed as a compact, maneuverable solution ideal for small hedges and those with intricate curves, this hedge trimmer leverages a 40Vmax XGT Li-Ion battery to deliver smooth, high output performance that surpasses the capabilities of the DUH506 series. Boasting constant speed control to maintain consistent blade rotation, even under load, this trimmer ensures stable, seamless operation. Its high water-resistance, compatible with Makita's XPT (Extreme Protection Technology) system, allows for use in wet conditions, while a reverse function helps clear jammed branches. To further enhance user comfort, the lightweight aluminum guide bar and antivibration double-layered housing work in tandem to reduce fatigue. Complemented by an easy-press switch lever, anti-restart function, electric brake, and lock-off feature, the 40Vmax XGT® Hedge Trimmer embodies Makita's commitment to engineering professional-grade solutions that empower users to work with unparalleled efficiency and control.
STROKES PER MINUTE 4,200 MINˉ¹ NO LOAD SPEED 2,100 MINˉ¹ DIMENSIONS 929 X 207 X 185 MM WEIGHT 3.0 KG
COMFORT
Redesigned, easy-to-press switch lever allows activation from all sides of the handle
500MM
BLADE LENGTH
1910T1-0 Chip receiver
OPTIONAL ACCESSORIES
MR014GZ
40VMAX XGT® | 18V LXT JOBSITE BLUETOOTH SPEAKER
The 40Vmax XGT/18V LXT Jobsite Bluetooth Speaker (MR014GZ) is a powerful and versatile audio solution designed to elevate your worksite experience. Compatible across both 40Vmax XGT and 18V LXT platforms, this speaker delivers exceptional sound quality and volume. The MR014GZ boasts a range of advanced features, including high-quality Bluetooth codecs for seamless audio playback, a built-in microphone amplifier, and a Type-A USB output port for charging your devices. Its enlarged component speakers, passive radiators, and improved sound pressure level ensure a powerful, deep bass and crystal-clear audio performance. Designed for the rigours of the job site, the MR014GZ is IP65-rated for dust and shower-proof protection, and its enlarged colour LCD screen and illuminated control buttons make it easy to navigate and control your music. The Bluetooth transmission power has been upgraded to Class 1, reducing the risk of interrupted communication even at greater distances of up to 30 meters, with a maximum range of 100m. The speaker also features a convenient smartphone stand, allowing you to securely position your device for hands-free use. Additionally, the 40Vmax XGT/18V LXT Jobsite Bluetooth Speaker can be connected to up to 10 units in the mono configuration, enabling you to create a powerful, synchronized audio system across your worksite.
Powerful deep bass and high sound quality have been achieved due to improvements such as enlarged component speakers,
EXPERIENCE THE NEXT GENERATION IN 40V MAX TECHNOLOGY WITH HIGH OUTPUT TABLESS CELLS
Exclusively available on the BL4040F these next-generation cells are designed with cutting-edge technology. Tabless lithium-ion cells remove the bottleneck allowing for a much more efficient method of power delivery.
Tabless cells avoid current concentration by connecting the entire end of the electrode to the end of the cell instead of the tabs. This improves battery efficiency, thermal management and overall battery performance. Elevate your workday with the high-output 40V Max 4.0Ah battery – where power, durability, and innovation meet to redefine excellence in tool performance.
BENEFITS OF TABLESS CELLS ARE
• Higher power output with less internal electrical resistance in BL4040F –Up to 35% more power compared to BL4040
• Reduced temperature under heavy load due to a lower electrical resistance in BL4040F – Up to 45% cooler running compared to BL4040
• Higher productivity of connected tool
High Output battery, designed to produce up to 35% more power versus the standard 4.0Ah battery
ith Tabless cell technology, BL4040F runs up to
Experience the difference in every task as these high-output batteries drive your tools to new heights, effortlessly handling heavy load applications. Designed for high demand applications these batteries supply a higher output power enabling XGT tools to continuously perform heavy duty applications.
RM350D ROBOTIC LAWNMOWER™
The Makita Robotic Lawnmower optimises ease of use by automatically mowing and charging. Imagine coming home to a perfectly mowed lawn without having to lift a finger. This device ensures that you have to put less effort into maintaining your lawn, so you can fully enjoy your free time.
The Makita robotic lawnmower, equipped with high-quality brushless motors, ensures that your lawn is maintained without sacrificing efficiency. With a maximum working area of 3,500 m², the Makita robotic lawnmower excels in extensive coverage, thanks to its fast charging capabilities and long continuous operating time.
The robotic lawnmower runs on a built-in 18 V / 5.0 Ah Li-ion battery and is charged in the charging station.
HOW IT WORKS
5. AC ADAPTOR
Place the AC adapter keeping 30 cm or more height from the ground. It is recommended to fix the AC adapter on the wall using screws
2. CHARGING STATION
This charges the Robotic Mower and flows signals in the boundary wire and guide wire
4. GUIDE WIRE
This wire leads the Robotic Mower to the charging station. This wire also guides the lawn mower to areas that the lawn mower works less frequently
3. BOUNDARY WIRE
This wire is installed around the outermost side of the work area. It lets the Robotic Mower recognise the work area in which to mow the lawn
1. ROBOTIC MOWER
This is the main unit that mows the lawn. It is charged by the charging station and automatically mows the lawn within the work area Battery
WATCH NOW Learn more about Robotic Mower
Battery type
Automatic charging
Max work area*1m2
Continuous run time on a full battery charge: min
Charging time
Method for increasing work area
Cutting width: mm (")
No load speed: rpm
Cutting width: mm (") Continuous run time on a full battery
Running pattern
Running speed: km/h
Guide wire
Running
km/h Method for increasing work area
Blade
Cutting height adjustment
Introducing the new Makita 18V Brushless Robotic Mower™
Up to 3,500m² Maximum Recommended mowing area
In-built scheduling feature to suit users’ mowing time requirements
Map operation via boundary wire
DTC100ZK
18V LXT® 50MM CLOSED JAWS CABLE CUTTER
The 18V LXT® 50mm Closed Jaws Cable Cutter DTC100ZK is a cutting edge tool designed to meet the specific needs of linesmen and commercial electricians. The closed jaw design ensures precise cutting of cables. It provides a fixed cutting area, allowing for clean and accurate cuts without any slipping or movement during the cutting process. This precision is crucial to maintain the integrity of the cable and ensure optimal electrical connections.
Boasting an impressive 50mm opening width and an adjustable automatic blade return dial, the DTC101ZK customizes the blade opening angle to the cable diameter, enhancing precision and versatility. It cuts cable conductor cross sections up to 500mm², handling Cu (Copper) and Al (Aluminum) strands. Weighing just 2.9kg, the lightweight design enhances maneuverability, making it effortless to work in confined spaces or overhead applications. The closed jaw ensures precise, clean, and accurate cutting results. The LED job light with afterglow function provides optimal illumination in dimly lit environments, while the optional shoulder belt adds convenient portability.
OPTIONAL ACCESSORIES
161347-8 Shoulder Strap
BLADE OPENING 50 MM
CUTTING CAPACITY
SPECIFICATIONS
600V-CV: 500MM² SINGLE-CORE
6600V-CV: 500MM2 SINGLE-CORE
600V-IV: 500MM2 SINGLE-CORE
600V-VVR: 150MM2 TRIPLE-CORE
DIMENSIONS
PRODUCT FEATURES
DTC101ZK
18V LXT® 50MM OPEN JAWS CABLE CUTTER
The 18V LXT® 50mm open Jaws Cable Cutter is a cutting-edge tool designed to meet the specific needs of linesmen and commercial electricians. With a maximum blade opening width of 50mm (2 inches), this cordless cable cutter efficiently handles various cable-cutting tasks. The open jaw design allows quick cable positioning and single-motion cutting, boosting efficiency for larger projects. Boasting an impressive 50mm opening width and an adjustable automatic blade return dial, the 18V LXT® Cable Cutter with 500mm² Jaw customises the blade opening angle to the cable diameter, enhancing precision and versatility. It cuts cable conductor cross sections up to 500mm², handling Cu (Copper) and Al (Aluminium) strands. Weighing just 3.6kg with a 6.0Ah 18V LXT Battery fitted, the lightweight design enhances manoeuvrability, making working in confined spaces or overhead applications effortless. The closed jaw ensures precise, clean, and accurate cutting results. The LED job light with the afterglow function provides optimal illumination in dimly lit environments, while the optional shoulder belt adds convenient portability.
OPTIONAL ACCESSORIES
161347-8 Shoulder Strap
BLADE OPENING 50 MM
CUTTING CAPACITY
600V-CV: 500MM² SINGLE-CORE
6600V-CV: 500MM2 SINGLE-CORE
600V-IV: 500MM2 SINGLE-CORE
600V-VVR: 150MM2 TRIPLE-CORE
DIMENSIONS
DESIGN
Lightweight design to provide excellent maneuverability & easy operation PRODUCTIVITY
for cutting Al / Cu cable with a blade opening capacity of 50mm
DTC102ZK
18V LXT® 65MM CLOSED JAWS CABLE CUTTER
The 18V LXT® 65mm Closed Jaws Cable Cutter is a cutting-edge tool designed to meet the specific needs of linesmen and commercial electricians. The closed jaw design ensures precise cutting of cables. It provides a fixed cutting area, allowing for clean and accurate cuts without any slipping or movement during the cutting process. This precision is crucial to maintain the integrity of the cable and ensure optimal electrical connections. Boasting an impressive 65mm opening width and an adjustable automatic blade return dial, the 18V LXT® Cable Cutter with 600mm² customises the blade opening angle to the cable diameter, enhancing precision and versatility. It cuts cable conductor cross sections up to 600mm², handling Cu (Copper) and Al (Aluminium) strands. Weighing just 3.5kg with a 6.0Ah 18V LXT Battery fitted, the lightweight design enhances manoeuvrability, making working in confined spaces or overhead applications effortless. The closed jaw ensures precise, clean, and accurate cutting results. The LED job light with the afterglow function provides optimal illumination in dimly lit environments, while the optional shoulder belt adds convenient portability.
OPTIONAL ACCESSORIES
161347-8 Shoulder Strap
SPECIFICATIONS
MAX BLADE OPENING WIDTH 65 MM
CUTTING CAPACITY
600V-CV: 600MM² SINGLE-CORE
6600KV-CV: 600MM² SINGLE-CORE
600V-IV: 500MM² SINGLE-CORE
600V-CVT: 325MM² TRIPLE-CORE
600V-VVR: 250MM² QUAD-CORE DIMENSIONS
DESIGN
Lightweight design to provide excellent maneuverability & easy operation
DTC103ZK
18V LXT® 54MM CLOSED JAW ACSR CABLE CUTTER
The 18V LXT® 54mm Closed Jaw ACSR Cable Cutter is a cutting-edge tool specifically engineered to cut through Aluminium Conductor Steel Reinforced power transmission lines. The closed jaw design ensures precise cutting of cables. It provides a fixed cutting area, allowing for clean and accurate cuts without slipping or movement during the cutting process. This precision is crucial to maintain the integrity of the cable and ensure optimal electrical connections. Boasting an impressive 54mm opening width and an adjustable automatic blade return dial, the DTC103ZK customises the blade opening angle to the cable diameter, enhancing precision and versatility. It cuts Aluminium cable conductor cross-sections up to 550mm², with a steel reinforcement cross-section capacity of 70mm². The LED job light with the afterglow function provides optimal illumination in dimly lit environments, while the optional shoulder belt adds convenient portability.
OPTIONAL ACCESSORIES
161347-8 Shoulder Strap
SPECIFICATIONS
MAX BLADE OPENING WIDTH 54 MM
CUTTING CAPACITY
AL 550MM² ST 70MM² DIMENSIONS 116 X 240 X 401 MM
5.5 KG
PRODUCT FEATURES
design to provide excellent maneuverability & easy operation
DTD173Z
18V LXT BRUSHLESS 4-SPEED IMPACT DRIVER
The Makita 18V LXT® Brushless 4-Speed Impact Driver DTD173Z sets new standards. Accepting all common 1/4" Hex bits in a compact size measruing 111mm from the rear of the tool to the collet, this is Makita's smoothest 18V LXT® Impact Driver yet.
The DTD173Z offers users four speeds and also features a wood fastening mode, bolt loosening mode, and two Tek screw fastening modes for maximum control.
All modes have been engineered to minimise screw thread stripping, screw breakage and damage to workpieces. These features can be easily programmed in to the Impact Driver and toggled through using the quick mode selector button underneath the collet.
Other standout features include the main control panel now being located at the rear of the tool for convenient visibility and usability, and an LED ring light behind the collet for maximum work area illumination.
DTD173Z features XPT (Extreme Protection Technology), a system of features that provides enhanced water and dust resistance, enabling operation in harsh jobsite environments.
SPECIFICATIONS
PRODUCT FEATURES
POWER
Brushless motor delivers 3,600 Max RPM and 180 N·m of Max Torque
INNOVATION
Assist Mode and two Tightening Mode features help eliminate "screw cam-out" and "cross threading"
CONVENIENCE
OPTIONAL
EASY-TO-SEE SWITCH PANEL NOW LOCATED ON REAR SIDE
ACCESSORIES
Check out our range of Impact XPS Driver Bits at https://www.makita.co.nz/accessories/search/impactxps
Makita nut runners deliver precise torque control for higher torque and hard to reach fastening applications in production and assembly. The Makita 18V LXT Cordless 3/8" Square Drive Angle Screwdriver (DFL126FZ) is a torque-specific solution (5.0 - 12.0 Nm) that install fasteners accurately and efficiently, with extended run time. The DFL126FZ is USB programmable, with "real world" accuracy that has earned certification within major automotive and aerospace assemblers by achieving repeatability within 4% of mean torque. It offers RPM and directional programming via USB port for multi-stage rundown control. It has a no-load speed of 75 - 1000 RPM for efficient fastening. When used in maintenance mode, the tool notifies operator when calibration is due. It also includes a pass/fail indicator to clearly confirm the fastening achievement on each application.It's part of the Makita line of Assembly Tools. Makita is the industry leader in cordless clutch tools and accessories used for precision fastening in an assembly environment. Makita-built assembly tools are usercertified for real-world repeatability of +/- 4% of mean torque. Makita assembly tools combine power, accuracy and ergonomics to deliver solutions that lower costs, enhance ergonomics, reduce trip hazards and increase productivity when compared to air tools.
OPTIONAL ACCESSORIES
765027-4 Torque adjust tool
NO LOAD SPEED 75 - 1,000 MINˉ¹
DRIVING SHANK 9.5 MM (3/8")
FASTENING TORQUE HARD: 12 N·M | SOFT: 5 N·M
DIMENSIONS 456 X 81 X 116 MM
WEIGHT 1.7 KG SPECIFICATIONS
RPM & DIRECTIONAL PROGRAMMING
RPM and directional programming via USB port for multi-stage rundown control PASS/FAIL
LAMP Indicates sufficient and insufficient fastening achievement and audibly alerts operator to failed fastenings.
Makita nut runners deliver precise torque control for higher torque and hard to reach fastening applications in production and assembly. The Makita 18V LXT Cordless3/8" Square Drive Angle Screwdriver (DFL303FZ) is a torque-specific solution (10.0 - 30.0 Nm) that install fasteners accurately and efficiently, with extended run time. The DFL303FZ is USB programmable, with "real world" accuracy that has earned certification within major automotive and aerospace assemblers by achieving repeatability within 4% of mean torque. It offers RPM and directional programming via USB port for multi-stage rundown control. It has a no-load speed of 50 - 420 RPM for efficient fastening. When used in maintenance mode, the tool notifies operator when calibration is due. It also includes a pass/fail indicator to clearly confirm the fastening achievement on each application. It's part of the Makita line of Assembly Tools. Makita is the industry leader in cordless clutch tools and accessories used for precision fastening in an assembly environment. Makita-built assembly tools are usercertified for real-world repeatability of +/- 4% of mean torque. Makita assembly tools combine power, accuracy and ergonomics to deliver solutions that lower costs, enhance ergonomics, reduce trip hazards and increase productivity when compared to air tools
Makita nut runners deliver precise torque control for higher torque and hard-toreach fastening applications in production and assembly. The Makita 18V LXT Brushless 3/8" Square Drive Angle Screwdriver (DFL404FZ) is a torque-specific solution (20.0 - 40.0 Nm) that install fasteners accurately and efficiently, with extended run time. The DFL404FZ is USB programmable, with "real world" accuracy that has earned certification within major automotive and aerospace assemblers by achieving repeatability within 4% of mean torque. It offers RPM and directional programming via a USB port for multi-stage rundown control. It has a no-load speed of 50 - 310 RPM for efficient fastening. When used in maintenance mode, the tool notifies the operator when calibration is due. It also includes a pass/fail indicator to clearly confirm the fastening achievement on each application. It's part of the Makita line of Assembly Tools. Makita is the industry leader in cordless clutch tools and accessories used for precision fastening in an assembly environment. Makita-built assembly tools are user-certified for real-world repeatability of +/- 4% of mean torque. Makita assembly tools combine power, accuracy and ergonomics to deliver solutions that lower costs, enhance ergonomics, reduce trip hazards and increase productivity when compared to air tools.
OPTIONAL ACCESSORIES
765027-4 Torque adjust tool
RPM & DIRECTIONAL PROGRAMMING
RPM and directional programming via USB port for multi-stage rundown control
PASS/FAIL INDICATOR LAMP
Indicates sufficient and insufficient fastening achievement and audibly alerts operator to failed fastenings.
OPTIONAL ACCESSORIES
765027-4 Torque adjust tool
RPM & DIRECTIONAL PROGRAMMING
RPM and directional programming via USB port for multi-stage rundown control
PASS/FAIL INDICATOR LAMP
Indicates sufficient and insufficient fastening achievement and audibly alerts operator to failed fastenings.
DHW180Z
18V LXT® CORDLESS PRESSURE WASHER
Tackle outdoor cleaning tasks with ease using the Makita 18V LXT® Pressure Washer DHW180Z - a versatile and portable tool that connects to any standard garden hose to provide water access for washing vehicles, windows, paving, decks, and more. For use in remote areas without access to mains water, an optional plastic bottle adapter is available as well as a self-priming syphon hose can be fitted to extract water out of a reservoir such as a water tank or drum. DHW180Z delivers a maximum pressure rate of 348psi making it ideal for a vartiety of cleaning applications. At only 2.7kg with an 18V LXT battery fitted, DHW180Z is perfect for use in all orientations whether you are overhead cleaning a house, or underneath a vehicle. The pressure washer also features a 5-in-1 nozzle which can be toggled from a 0° to 40° spray width angle as well as a shower/rinse mode for added versatility. DHW180Z features XPT (Extreme Protection Technology), a system of features that provides enhanced.
STANDARD ACCESSORIES
LX00000079 Hose Assembly
LX00000060 Syphon/Strainer Attachment
LX00000049 350mm Extension Nozzle
LX00000050 5-in-1 Nozzle
SPECIFICATIONS
MAX PERMISSIBLE PRESSURE 2.4 MPA | 348 psi
FLOW RATE 2.5 L/MIN
MAX SUCTION HEIGHT 2.0 M (6.7 FT)
DIMENSIONS W/ NOZZLE 888 X 99 X 239 MM WEIGHT 2.3 KG
PRODUCT FEATURES
CONVENIENCE
5-in-1 nozzle allows for easy mode changes by rotating the nozzle head
VERSATILITY
OPTIONAL ACCESSORIES
LX00000004 Plastic Bottle Adapter
LX00000003 Wheel Brush
LX00000001 Foam Nozzle
LX00000002 Angle Nozzle
The self-priming function allows the user to connect to a water reservoir for added freedom from the cord POWER
With 2 adjustable power modes, lets you optimize performance to perfectly match your application
DUA200Z
18V LXT® BRUSHLESS 20 CM (8") POLE SAW
Makita's 18V LXT 20cm Pole Saw DUA200Z is a versatile and efficient tool designed to tackle a wide range of pruning and trimming tasks. Powered by a brushless motor, this pole saw delivers impressive performance while reducing fatigue and increasing productivity for the operator. The lightweight tool head and high work efficiency, combined with the head angle adjustment mechanism, ensure exceptional manoeuvrability and ease of use when targeting high branches. The adjustable head angle, which can be locked and unlocked with a single touch, allows for precise positioning between 60° upwards and 60° downwards, optimizing the cutting angle for various applications. The slim tool head design further enhances accessibility, enabling easy insertion between branches. For added convenience, the pole can be adjusted between 1.6 m and 2.5 m without tools, while the tool-less chain adjustment system simplifies maintenance. The highly transparent oil tank allows for easy monitoring of the remaining lubricant, and the automatic chain lubrication ensures consistent performance. Featuring a 7-tooth drive sprocket with a .325" 80TXL chain and 20cm bar, the DUA200 effortlessly tackles a wide variety of cutting applications. Equipped with a branch hook, the Makita 18V LXT 20cm Pole Saw DUA200Z is a versatile and efficient tool, catering to the needs of professional landscapers and homeowners alike, delivering high work efficiency and easy pruning of high branches.
STANDARD ACCESSORIES
1914S3-3 20cm .325" Guide Bar
1914S1-7 20cm .325" 80 TXL Chain
199897-3 Chain Oil
SPECIFICATIONS
BLADE ANGLE ADJUSTMENT 60° TILT-UP TO 60° DOWN
- 2,520 X 85 X 134 MM
PRODUCT FEATURES
DESIGN
Design with a slim tool head that easily fits between branches for precise trimming
CONVENIENCE
"Tool-free" chain adjustment for convenient operation and maintenance
VERSATILITY
9 angle settings with 120° working range for precision cutting
Introducing the 18V LXT® Brushless 150mm Pruning Saw, a versatile addition to the ever-expanding range of Makita's Outdoor Power Equipment line-up. The 18V LXT® Brushless 150mm Pruning Saw is both lightweight and compact making it a perfect option for light limb cutting and pruning. The 18V LXT® Brushless 150mm Pruning Saw features a Makita-built brushless motor that delivers optimum cutting performance. It features tool-free chain adjustment for convenient operation and maintenance as well as a retractable guard for convenient operation and maintenance. The DUC150 can perform over 300 cuts in Ø50mm cedar with one fully charged 18V LXT® 5.0Ah battery. Convenience features include a soft grip handle that is engineered for the user to more easily apply even cutting pressure. It is lightweight at only 2.0kg with an 18V LXT 5.0Ah battery fitted for reduced operator fatigue and enhanced comfort over extended use periods. The 150mm Pruning Saw features an efficient Makita-built brushless motor, efficient runtimes, and exceptional power and speed. Durability is also front-of-mind, thanks to Extreme Protection Technology (XPT™) which provides improved dust and water resistance for operation in harsh outdoor conditions.
STANDARD ACCESSORIES
1912F1-4 15cm .325" Guide Bar
1912E8-3 15cm .325" 80 TXL Chain
199897-3 Chain Oil
D-70948 4.0mm Chain Sharpening File
SPECIFICATIONS
MAX POWER 320W
CHAIN SPEED 0-480M/MIN
GUIDE BAR 150MM
DIMENSIONS 408 X 90 X 232 MM
WEIGHT 1.7KGS
PRODUCT FEATURES
CONVENIENCE
No petrol, emissions, oil mixing or pull starts with reduced maintenance and low noise levels
DURABILITY
Extreme Protection Technology (XPT™) engineered for improved dust and water resistance for operation in harsh job site conditions
TECHNOLOGY
Easy-to-use design with toolless chain adjustment
INNOVATION
Added safety with electric brake, protective chain and bar guard and rear handle guard
The GA7090 180 mm (7") 2,200 W Angle Grinder is engineered for exceptional performance in demanding metal grinding operations. The large trigger switch is easily activated in a variety of orientations. Featuring a powerful and robust 2,200W motor, this angle grinder is remarkably lightweight and compact, enhancing maneuverability during grinding tasks. The side grip can be attached closer to the center of the wheel rotation, reducing the load on the user's hand for improved handling and control. To ensure long-lasting reliability, the grinder's stator core abrasion is reduced by a water absorption process applied to the nylon motor housing, minimizing dimensional changes in humid conditions. Offering a threeposition adjustable side grip for operator convenience, and double insulation for added safety, Makita's 180 mm (7") 2,200 W Angle Grinder is the ideal choice for professional metal grinding applications, delivering exceptional performance and durability.
SPECIFICATIONS
CONTINUOUS RATING INPUT
W WHEEL DIAMETER 180 MM (7")
438 X 200 X 144 MM
SUPPLY CORD 2.0 M
GA9090N
230 MM (9") 2,200 W ANGLE GRINDER, LARGE TRIGGER SWITCH
The GA9090 230 mm (9") 2,200 W Angle Grinder is engineered for exceptional performance in demanding metal grinding operations. The large trigger switch is easily activated in a variety of orientations. Featuring a powerful and robust 2,200W motor, this angle grinder is remarkably lightweight and compact, enhancing maneuverability during grinding tasks. The side grip can be attached closer to the center of the wheel rotation, reducing the load on the user's hand for improved handling and control. To ensure long-lasting reliability, the grinder's stator core abrasion is reduced by a water absorption process applied to the nylon motor housing, minimizing dimensional changes in humid conditions. Additionally, the serial number label is strategically placed behind the wheel cover, protecting it from damage. Offering three-position adjustable side grip for operator convenience, and double insulation for added safety, Makita's 230 mm (9") 2,200 W Angle Grinder is the ideal choice for professional metal grinding applications, delivering exceptional performance and durability..
180 MM (7") 2,200 W ANGLE GRINDER, LARGE TRIGGER SWITCH CONTINUOUS RATING INPUT
DIAMETER
W
MM (9")
MAKITA IMPACT XPS
Makita® ImpactXPS™ is latest innovation in fastening with insert bits and fastening accessories designed to fulfill those needs of premium bits with expectional product life and the highest quality for the demands of the professional user, lasting up to 90x longer than standard impact bits. E-19504
Makita's Net Mesh Sanding Abrasive range offers a versatile and highperformance sanding solution for a wide range of applications. Leveraging a unique net-like structure, these innovative sanding products promote enhanced dust extraction by allowing airflow through the material. This not only creates a cleaner work environment but also extends the lifespan of the abrasive, as dust and debris are more effectively removed during use. The open mesh design also reduces clogging, enabling the sanding discs to maintain their cutting ability for longer periods. Crafted with premium abrasive materials, the Net Mesh Sanding Abrasive range delivers a superior finish on a variety of surfaces, including wood, metal, and paint. Available in a range of grit sizes, these discs and sheets can accommodate different sanding requirements, from coarse stock removal to fine finishing. For optimal performance, it is recommended to use a pad saver, which helps to maintain the integrity of the backing and extends the life of the sanding disc. The Net Mesh Sanding Abrasive range features a hook and loop backing, allowing them to be securely attached to compatible sanding pads. This convenient design makes them a versatile solution for sanding flat and contoured surfaces. Their durable construction ensures long-lasting performance, even in the most demanding jobsite conditions. Whether you're a professional woodworker, auto body technician, or general tradesperson Makita's Net Mesh Sanding Abrasive range provides the perfect balance of cutting power, dust control, and efficiency to elevate your sanding capabilities. Makita's Net Mesh Sanding Abrasive range offers a versatile and high-performance sanding solution for a wide range of applications. Leveraging a unique net-like structure, these innovative sanding products promote enhanced dust extraction by allowing airflow through the material. This not only creates a cleaner work environment but also extends the lifespan of the abrasive, as dust and debris are more effectively removed during use. The open mesh design also reduces clogging, enabling the sanding discs to maintain their cutting ability for longer periods.
Crafted with premium abrasive materials, the Net Mesh Sanding Abrasive range delivers a superior finish on a variety of surfaces, including wood, metal, and paint. Available in a range of grit sizes, these discs and sheets can accommodate different sanding requirements, from coarse stock removal to fine finishing. For optimal performance, it is recommended to use a pad saver, which helps to maintain the integrity of the backing and extends the life of the sanding disc.
The Net Mesh Sanding Abrasive range features a hook and loop backing, allowing them to be securely attached to compatible sanding pads. This convenient design makes them a versatile solution for sanding flat and contoured surfaces. Their durable construction ensures long-lasting performance, even in the most demanding jobsite conditions. Whether you're a professional woodworker, auto body technician, or general tradesperson Makita's Net Mesh Sanding Abrasive range provides the perfect
D-78891 Makita Net 1/3 Sanding Sheet 80x130 A320
D-78776 Makita Net 1/3 Sanding Sheet 80x130 A80
D-78782 Makita Net 1/3 Sanding Sheet 80x130 A120
D-78798 Makita Net 1/3 Sanding Sheet 80x130 A180
D-78807 Makita Net 1/3 Sanding Sheet 80x130 A240
D-78813 Makita Net 1/3 Sanding Sheet 80x130 A320
D-78900 Makita Net Sanding Sheet Delta 100x150 A120
D-78916 Makita Net Sanding Sheet Delta 100x150 A180
D-78922 Makita Net Sanding Sheet Delta 100x150 A240
D-78938 Makita Net Sanding Sheet Delta 100x150 A320
Makita's range of Pad Savers are an essential accessory for prolonging the life and performance of your sanding discs. Designed specifically for use with Net Mesh sanding abrasives to maintain backing pad integrity, the Pad Saver helps prevent premature wear and tear, ensuring consistent sanding results and maximizing the value of your sanding consumables.
D-78704 Makita 125mm Pad Saver
D-78760 Makita 150mm Pad Saver
D-78829 Makita 80x130mm Pad Saver
D-78944 Makita 100x150 Delta Pad Saver
D-78885 Makita 1/3 Sheet Pad Saver
1914G4-7 SHEAR BLADE 500MM
The Makita 500mm Hedge Trimmer Blade (1914G4-7) is for use with the 18V LXT® 500mm Hedge Trimmer (DUH506, sold separately) and with the 40Vmax XGT® 500mm Hedge Trimmer (UH020G, sold separately) for a wide variety of trimming applications. The 1914G4-7 is a 500mm shear blade for optimal cutting performance. The 500mm Hedge Trimmer Blade is doublesided for efficient cutting of hedges. The Guide Bar is made of aluminium for a lightweight design.
1913M9-3
MAKITA ROBOTIC LAWNMOWER BLADE SET RM350D
Replacement swing-back blades for RM350D - Makita Robotic Lawnmower.
1914G5-5
SHEAR BLADE 600MM
The Makita 600mm Hedge Trimmer Blade (1914G5-5) is for use with the 18V LXT® 600mm Hedge Trimmer (DUH606, sold separately) and with the 40Vmax XGT® 600mm Hedge Trimmer (UH021G, sold separately) for a wide variety of trimming applications. The 1914G5-5 is a 600mm shear blade for optimal cutting performance. The 600mm Hedge Trimmer Blade is doublesided for efficient cutting of hedges. The Guide Bar is made of aluminium for a lightweight design.
1913N4-0
MAKITA ROBOTIC MOWER WIRE REPAIR SET RM350D
Wire repair set for RM350D boundary wire.
1914E7-7
SHEAR BLADE ROUGH CUT 600MM
The Makita 600mm Rough Cut Pole Hedge Trimmer Blade (1914E7-7) is for use with the 40Vmax XGT® 600mm Pole Hedge Trimmer (UN001G, sold separately) for a wide variety of trimming applications. The 1914E7-7 is a 600mm rough cut shear blade for optimal cutting performance in demanding trimming applications, and has a 25mm maximum cutting diameter capacity. The 600mm rough cut Pole Hedge Trimmer Blade is double-sided for efficient cutting of hedges. The Guide Bar is made of
1913N8-2
COUPLER 5PC FOR ROBOTIC LAWNMOWER
5 piece copler set for connecting intersections of the boundary wire and guide wires for the Makita Robotic Lawmower, and extending the boundary or guide wires if the length of a single wire is not enough.
1913N6-6
50PC PEG FOR ROBOTIC LAWNMOWER RM350D
Extra pegs for securing boundary wire for RM350D in to grass.
1913N2-4
ROBOTIC LAWNMOWER GUIDE WIRE 150M RM350D
Extra Boundary/Guide wire for RM350D. Can be used to extend your required mowing area or as replacement wire.
1913Y3-9
ROBOTIC LAWNMOWER GUIDE WIRE 50M RM350D
Extra Boundary/Guide wire for RM350D. Can be used to extend your required mowing area or as replacement wire.
MAKITA 1" DRIVE IMPACT SOCKETS
MAKITA 1" DEEP-DRIVE IMPACT SOCKETS
Makita 1" Impact Sockets are the perfect accessory for high torque 1” impact wrenches when taking on demanding applications like driving large lags through support beams, setting anchors, removing corroded fasteners, and during large industrial/agricultural equipment maintenance.
Makita 1" Impact Sockets are constructed with Chromium-Molybdenum Steel (CR-MO) and black oxide coated for longer life and maximum durability and robustness for extreme torque applications as well as a deep length for longer reach and the ability to fasten over longer threads. They are engineered for use with 1” drive high-torque impact wrenches and have been specifically engineered for use with TW009G and TW010G 40Vmax XGT® 1" Impact Wrenches.
Makita 1" Impact Sockets include a ring and pin for Impact Wrench Anvils with this configuration. Makita 1” Impact Sockets are available in standard and deep-drive lengths, making them ideal for tilt-up contractors, diesel and industrial mechanics, riggers, carpenters, and more.
MAKITA IMPACT SOCKET
MAKITA DIAMAK WHEELS
Makita's Diamak Wheels are an advanced line of abrasive grinding and cutting solutions designed to deliver exceptional performance and durability. Engineered with innovative diamond technology, these wheels offer unparalleled cutting abilities and extended lifespan, making them a go-to choice for professionals across various industries.
Featuring a specialized diamond grain structure, Makita Diamak Wheels provide superior cutting efficiency. The robust diamond chip bonding on each wheel segment ensures the abrasive remains securely in place, even under the most demanding conditions. This advanced construction allows users to tackle even the most challenging materials with ease. The precision-balanced design ensures consistent and smooth operation, minimizing vibration and reducing user fatigue.
Beyond their cutting prowess, Makita Diamak Wheels excel in terms of longevity. The diamond-infused composition resists wear and maintains its sharpness over extended use, translating to fewer wheel replacements and more productive work sessions. This cost-effective solution ultimately saves time and resources for businesses and tradespeople alike.
Versatile and reliable, Makita Diamak Wheels are suitable for a wide range of applications, from concrete and masonry to metal and stone. With their exceptional performance and durability, these wheels set a new standard for abrasive cutting and grinding tools
SEGMENTED RIM TURBO RIM
CONTINUOUS RIM
D-80204 DIAMAK Continuous Rim Diamond Wheel 105mm x 20/16mm
D-80210 DIAMAK Continuous Rim Diamond Wheel 115mm x 22.23mm
D-80226 DIAMAK Continuous Rim Diamond Wheel 125mm x 22.23mm
D-80248 DIAMAK Continuous Rim Diamond Wheel 180mm x 25.4mm
D-80254 DIAMAK Continuous Rim Diamond Wheel 230mm x 22.23mm
JM00000674
MAKITA CARRIER TROLLEY FOR HM004G
The Makita Heavy-Duty Hammer Cart gives contractors convenient and secure transportation for a breaker hammer and bits, and has been specifically designed for the 80Vmax (40V x2) XGT 28.6mm Hex
Shank Demolition Hammer. The large, rugged semipneumatic wheels role smoothly over rough terrain. At the end of the day, the Cart goes back into the truck more easily with the stair climber rails. The rails are also engineered for more convenient lifting up stairs, curbs, and other elevated surfaces. For secure transport, the adjustable strap keeps the hammer securely fastened to the cart, and bit retainers firmly hold up to four 28.6mm demolition hammer bits. The cart also features two convenient and spacious compartments for battery and charger storage.
MAKITA SPADE BIT
Makita's Spade Bits are engineered to deliver exceptional performance and efficiency for demanding construction and industrial applications. Meticulously crafted from high-quality carbon steel, these bits are designed to provide long-lasting durability and precision, ensuring reliable performance on the job site. The 1/4” Hex Shank with indent makes these bits compatible with all impact drivers and hammer drill/drivers.
These spade bits boast a unique cutting edge configuration that maximizes drilling speed and accuracy. Compared to the previous range, these new bits deliver up to 250% faster drilling speeds, making quick work of a variety of timber and composite materials.
The robust construction, combined with a hardened point tip and double wing raked cutting tips, allows for clean, accurate holes. The specially designed flute pattern efficiently removes debris, minimizing binding and ensuring smooth, consistent drilling performance.
Makita's Spade Bits are the ideal choice for a wide range of professional applications, from framing and electrical work to plumbing and general construction. Their superior performance and long-lasting durability make them an indispensable tool for contractors, tradesmen, and industrial workers.
MAKITA SDS-PLUS NEMESIS II
Makita's Nemesis II SDS Bits are engineered to deliver unparalleled performance and longevity in the toughest drilling applications. Featuring a revolutionary 4-cutter geometry, these bits create true round holes, making them ideal for secure fastening. Makita Nemesis II SDS bits boast up to 50% longer life in reinforced concrete compared to standard TCT SDS bits.
Crafted from high-grade materials and coated for enhanced durability, the Nemesis II SDS Bits maintain their sharp edges for extended periods, reducing the need for frequent bit replacement. This translates to increased productivity, cost savings, and a more efficient overall drilling experience, whether you're a professional contractor or a dedicated DIY enthusiast. Elevate your drilling capabilities with the uncompromising power and precision of Makita's Nemesis II SDS Bits.
