INTRODUCING SKYHOOK™ TETHER & TRANSFER SYSTEM
INDUSTRIAL TETHERED TOOLS
THE PROTO® SKYHOOK ™ TETHER & TRANSFER SYSTEM: The next generation of safety techology for positive control of hand tools at height, in work areas requiring foreign material exclusion (FME) or anywhere simple accidents become costly mistakes. Since a better tether system is a safer tether system, SkyHook™ provides secure tool transfers, a free range of motion, and positive tool control at the worksite.
SKYHOOK ™ BUILDS ON EXISTING CARABINER TECHNOLOGY: MAINTAIN POSITIVE CONTROL during tool transfers. Whether hand-to-hand, person-to-person or person-to-station, the mechanism inside the innovative SkyHook™ keeps the tool completely secure at every point during the transfer. GAIN FREEDOM OF MOTION to use tools correctly with a SkyDock™ attached to the wrist. The short lanyard is light, tight and less likely to get caught on nearby equipment or snags than traditional lanyards. GET ACCOUNTABILITY through Positive Control. A tool attached to a SkyDock™ is either attached to a hand, a belt, a tool apron, a co-worker, a work truck or a central station. At all points, tools attached to SkyDock™ can be accounted for from truck to site and back. No tool is left behind.
“ NEX T GENERATION
SAFETY
TECHNOLOGY”
The SkyHook™ Tether & Transfer System is comprised of switches, docks, lanyards and carabiners, all designed to make tool control as complete as possible with little interference to tool function. THE HEART OF THE SKYHOOK ™ TECHNOLOGY IS THE SKYHOOK ™ AND THE SKYDOCK ™: • The SkyHook™ switch connector tethers to the tool on a short lanyard. • The SkyDock™ attachment securely anchors the SkyHook™ to wrist, belt, apron or station.
“ SAFE TOOL
TRANSFER
FIRST SIDE IS ACTIVE
2
SWIPE TO SWITCH
WARNING: WORK SAFELY WITH TOOLS. WEAR SAFETY GOGGLES.
You can hold the tool during transfer. The SkyHook™ does not require hands to make the switch.
Just “Swipe to Switch”. Hand-to-hand, hand-to-belt, person-to-person or person-to-station, the transfer is the same.
AT HEIGHT” FIRST SIDE OPENS AFTER SECOND SIDE CLOSES
+1.800.800.TOOL · Fax: +1.770.648.9108 · www.protoindustrial.com
SECOND SIDE IS ACTIVE
3
SKYHOOK™ TOOL & TRANSFER SYSTEM SkyHook™ is a comprehensive tether & transfer system compatible with screw-gate caribiners. SkyDocks™ are available on wrist straps, aprons, bags and holders. They can also be attached to stationary objects.
Tether your existing tools with Proto®’s line of heat shrink loops, tool collars, lanyards, bungies and web tethers.
Made from Dupont Delrin®*, a lightweight acetal resin with: • High mechanical strength and rigidity • High resistance to repeated impacts • Excellent resistance to moisture, gasoline and most solvents • Wide end-use temperature range
Mechanism is made from Dupont Delrin®, stainless steel springs and brass rivets for strength, durability and corrosion-resistance.
*Delrin® is a Dupont registered trademark.
4
WARNING: WORK SAFELY WITH TOOLS. WEAR SAFETY GOGGLES.
SKYHOOK™ COMPONENTS JPSWS Product # JPSDOCK JPSWS JPSS
Name SkyDock™ Storage Attachment SkyDock™ Wrist Strap SkyHook™ Switch Connector
Description SkyDock™ storage attachment point SkyDock™ wrist attachment point SkyHook™ switch connector with lanyard and carabiner
SKYHOOK™ TOOL KITS Product # JPS1 JPS2 JPSSCAFF4 JPSSCAFF5 JPST1
Name SkyHook™ Kit for 1 Tool SkyHook™ Kit for 2 Tools SkyHook™ Kit for 4 Tools SkyHook™ Kit for 5 Tools SkyHook™ with SkyDock™
Description (1) SkyHook,™ (1) SkyDock™ and (1) SkyDock™ Wrist Strap (2) SkyHooks™ with (2) SkyDock™ Wrist Straps and (2) SkyDocks™ (4) SkyHooks,™ (4) SkyDocks™ and (2) SkyDock™ Wrist Straps (5) SkyHooks,™ (5) SkyDocks and (2) SkyDock™ Wrist Straps (1) SkyHook™ switch connector with SkyDock™ storage attachment (no wrist strap)
SKYHOOK™ TOOL & TRANSFER SYSTEM
JPS2
SWITCHES, DOCKS & STORAGE
JPSDOCK
JPSS
JPSTLPKT2
JPSHS
SKYHOOK™ STORAGE KITS Product # JPSTLPKT1 JPSTLPKT2 JPSHS JPSTAPE JPSBOLT JPSSDLSM JPSAPRON30
Name SkyHook™ Single Dock Pocket Kit SkyHook™ Dual Dock Pocket Kit SkyHook™ Hammer/Ratchet Kit SkyHook™ Tape Pocket SkyHook™ Dual Dock Bolt Bag Kit SkyHook™ 8-Tool Saddle Kit SkyHook™ 6-Dock Apron Kit
+1.800.800.TOOL · Fax: +1.770.648.9108 · www.protoindustrial.com
JPSAPRON30
Description (1) SkyDock™ Single Dock Pouch and (1) SkyHook™ switch connector (1) SkyDock™ Dual Dock Pouch and (2) SkyHook™ switch connector (1) SkyDock™ Holder for Hammer or Ratchet and (1) SkyHook™ switch connector (1) Tape Measure Pouch with SkyHook™ Switch Connector (1) SkyDock™ Dual Dock Bolt Bag and (2) SkyHook™ switch connectors 8-Pocket Saddle with integrated SkyDocks™ and (8) SkyHook™ switch connectors (1) SkyDock™ 30” 6-Dock Apron and (6) SkyHook™ switch connectors
5
INDUSTRIAL TETHERS & ACCESSORIES
Existing tools can be retrofitted with same Proto® Industrial Tether Attachments used in the
Heat Shrink Loops and Tool Collars are weight and size rated for best fit on a wide range of tool sizes.
general product line.
HEAT SHRINK LOOPS Product # JP2R34X175LPOR JP2R1X175LPOR JP2R15X2LPOR JP2R2X2LPOR JP2R2X4LPOR JP2R275X2LPOR JP2R275X4LPOR
Name Heat Shrink Loop (0.75 x 1.75) Heat Shrink Loop (1.10 x 1.75) Heat Shrink Loop (1.50 x 2.00) Heat Shrink Loop (2.00 x 2.00) Heat Shrink Loop (2.00 x 4.00) Heat Shrink Loop (2.75 x 2.00) Heat Shrink Loop (2.75 x 4.00)
Description Heat Shrink Loop 3/4-in W x 1.75-in L Heat Shrink Loop 1.1-in W x 1.75-in L Heat Shrink Loop 1.5-in W x 2-in L Heat Shrink Loop 2-in W x 2-in L Heat Shrink Loop 2-in W x 4-in W Heat Shrink Loop 2.75-in W x 2-in L Heat Shrink Loop 2.75-in W x 4-in L
JPSSCAFF4KIT
JPSSCAFF5KIT
KITS Product #
6
Name
Description
JPSSCAFF4KIT
4-Piece Tethering Kit
Recommended tether attachments for tape measure, lineman’s pliers, hammer and level (tape measure holder, heat shrink loop, sealing tape, key rings and web D-rings)
JPSSCAFF5KIT
5-Piece Tethering Kit
Recommended tether attachments for tape measure, lineman’s pliers, hammer and level (tape measure holder, heat shrink loop, sealing tape, (2) key rings and (2) web D-rings) WARNING: WORK SAFELY WITH TOOLS. WEAR SAFETY GOGGLES.
INDUSTRIAL TETHERS & ACCESSORIES
TOOL COLLARS Product # JPCL0SS JPCL1SS JPCL2SS JPCL3SS JPCL4SS JPCL5SS JPCL6SS JPCL7SS
Name Tool Collar & Loop (TL0-SS) Tool Collar & Loop (TL1-SS) Tool Collar & Loop (TL2-SS) Tool Collar & Loop (TL3-SS) Tool Collar & Loop (TL4-SS) Tool Collar & Loop (TL5-SS) Tool Collar & Loop (TL6-SS) Tool Collar & Loop (TL7-SS)
Description For tools from 0.035 to 0.094-in diameter For tools from 0.94 to 0.156-in diameter For tools from 0.156 to 0.250-in diameter For tools from 0.219 to 0.313-in diameter For tools from 0.313 to 0.438-in diameter For tools from 0.400 to 0.540-in diameter For tools from 0.540 to 0.790-in diameter For tools from 0.079 to 1.00-in diameter
JLAN20LBD3LK
TOOL LANYARDS Product # JLAN5LB JLAN15LBSSRP JLAN15LBSSCAR JLAN15LB3LK JLAN15LBDSS JLAN20LBD3LK JLAN25LBDSS JLAN40LBD3LKSW JLAN40LBD3LK JLAN40LB3LKSW JLANHATRD
Name 5lb Elastic Lanyard 15lb Elastic Lanyard with (1) Screw Gate Carabiner 15lb Elastic Lanyard with (1) Stainless Steel Carabiner 15lb Elastic Lanyard with (1) Triple Lock Carabiner 15lb Elastic Lanyard with (2) Stainless Steel Carabiners 20lb Elastic Lanyard with (2) Triple Lock Carabiners 25lb Elastic Lanyard with (2) Stainless Steel Carabiners 40lb Web Lanyard with (2) Triple Lock Swiveling Carabiners 40lb Web Lanyard with Triple Lock Carabiner 40lb Web Lanyard with (2) Triple Lock Swiveling Carabiners Hard Had Lanyard (hat not included)
JDRSMOR
JPPEGLVPOU
JTAPESLV
ACCESSORIES Product # J072510ATA JPPEGLV JPPEGLVPOU JMOL36RFOR JDRSMOR JDRHDOR JTAPESLV
Name 4-Pocket Retractable Pouch PPE Caddy Glove Holder PPE Caddy Glove Holder/Pouch Sealing Tape D-Ring Web Tether HD D-Ring Web Tether Tethered Tape Measure Sleeve
+1.800.800.TOOL 路 Fax: +1.770.648.9108 路 www.protoindustrial.com
HEAT SHRINK, LOOPS, KITS, TOOL COLLARS, LANYARDS, D-RINGS & ACCESSORIES
JLANHATRD
Description
1-in W x 36-ft L For Use with Sealing Tape (JMOL36RFOR) For Use with Sealing Tape (JMOL36RFOR) Tethered Tape Measure Sleeve with D-Ring
7
SOCKETS, DRIVE TOOLS & ACCESSORIES All Proto速 Tethered Tool Sockets, Ratchets and Torque Wrenches feature a Positive Control Pin Detent System. Unlike the usual ball detent, that only provides friction to retain the socket. The Postive Control System requires a separate tool (such as a punch pin) to attach or remove the socket. These sockets cannot be removed without specific intent.
Proto速 applies the chrome finish after the holes are bored, for better corrosion resistance. These sockets are purpose-built for safety.
As an additional safety feature, Proto 速 Tethered Tool Sockets are manufactured with four detent holes, not just one. The pin detent will engage correctly regardless of the direction the socket is placed on the square drive.
8
WARNING: WORK SAFELY WITH TOOLS. WEAR SAFETY GOGGLES.
HIGHEST
With TorquePlus™ technology, our sockets grip fasteners tighter than a conventional socket can, enabling you to solidly seat fasteners and more easily break stubborn fasteners free.
LOWEST
Engages fastener on the flats rather than on the corners.
Reduces rounding of corners by applying forces over a larger surface area.
SOCKETS, DRIVE TOOLS & ACCESSORIES
TORQUEPLUS™ DELIVERS POWER WHERE YOU NEED IT
Delivers up to 15% more torque to the fastener shaft or nut.
CONVENTIONAL SOCKETS VS TORQUEPLUS™
Angled Corners
3/8" DRIVE 21 PIECE METRIC SOCKET SET - 12 POINT Product #: J52215-TT
>>12 Point Standard: 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20, 21, 22, 23, 24, 25, 26 mm.
>>Accessories: 9 and 11 Inch Socket Bars, and 21 Socket Clips. >>Weight (lbs): 2.98
Rounded Corners
CONVENTIONAL 6 POINT SOCKET
Contents J5206M-TT J5207M-TT J5208M-TT J5209M-TT J5210M-TT J5211M-TT J5212M-TT J5213M-TT J5214M-TT J5215M-TT J5216M-TT J5217M-TT J5218M-TT J5219M-TT J5220M-TT J5221M-TT J5222M-TT J5223M-TT J5224M-TT J5225M-TT J5226M-TT J2585 J2588 J2591
TORQUEPLUS™ 12 POINT SOCKET
Description Socket, 3/8" DR 6 mm 12 PT Socket, 3/8" DR 7 mm 12 PT Socket, 3/8" DR 8 mm 12 PT Socket, 3/8" DR 9 mm 12 PT Socket, 3/8" DR 10 mm 12 PT Socket, 3/8" DR 11 mm 12 PT Socket, 3/8" DR 12 mm 12 PT Socket, 3/8" DR 13 mm 12 PT Socket, 3/8" DR 14 mm 12 PT Socket, 3/8" DR 15 mm 12 PT Socket, 3/8" DR 16 mm 12 PT Socket, 3/8" DR 17 mm 12 PT Socket, 3/8" DR 18 mm 12 PT Socket, 3/8" DR 19 mm 12 PT Socket, 3/8" DR 20 mm 12 PT Socket, 3/8" DR 21 mm 12 PT Socket, 3/8" DR 22 mm 12 PT Socket, 3/8" DR 23 mm 12 PT Socket, 3/8" DR 24 mm 12 PT Socket, 3/8" DR 25 mm 12 PT Socket, 3/8" DR 26 mm 12 PT Socket, Bar 9" Socket, Bar 11" Socket, Clip 3/8" DR AS954E S3.8.1
+1.800.800.TOOL · Fax: +1.770.648.9108 · www.protoindustrial.com
3/8-INCH DRIVE SOCKET SETS
The difference is in the points. A TorquePlus™ socket features rounded points which allow the socket walls to contact the fastener walls, keeping pressure off the points. This engineering change helps the socket find a longer, better grip on the flat of the fastener head. All Proto® hand sockets feature the innovative TorquePlus™ design.
ASME B107.1
9
SOCKETS, DRIVE TOOLS & ACCESSORIES 3/8-INCH DRIVE SOCKET SETS, 3/8” & 1/2” DRIVE HEX BIT SETS
3/8” DRIVE 13 PIECE SOCKET SET - 12 POINT
3/8” DRIVE 13 PIECE DEEP SOCKET SET - 12 POINT
Product #: J52124-TT
Product #: J52112-TT
>>12 Point Standard: 1/4, 5/16, 3/8, 7/16, 1/2, 9/16,
>>12 Point Deep: 1/4, 5/16, 3/8, 7/16, 1/2, 9/16,
5/8, 11/16, 3/4, 13/16, 7/8, 15/16, 1 Inch >>Accessories: 13 Inch Socket Bar with 13 Socket Clips. >>Weight (lbs): 1.96
Contents J5208-TT J5210-TT J5212-TT J5214-TT J5216-TT J5218-TT J5220-TT J5222-TT J5224-TT J5226-TT J5228-TT J5230-TT J5232-TT J2586 J2591
Description Socket, 3/8" DR 1/4" 12 PT Socket, 3/8" DR 5/16" 12 PT Socket, 3/8" DR 3/8" 12 PT Socket, 3/8" DR 7/16" 12 PT Socket, 3/8" DR 1/2" 12 PT Socket, 3/8" DR 9/16" 12 PT Socket, 3/8" DR 5/8" 12 PT Socket, 3/8" DR 11/16" 12 PT Socket, 3/8" DR 3/4" 12 PT Socket, 3/8" DR 13/16" 12 PT Socket, 3/8" DR 7/8" 12 PT Socket, 3/8" DR 15/16" 12 PT Socket, 3/8" DR 1" 12 PT Socket, Bar 13" Socket, Clip 3/8" DR ASME B107.1
Contents J5008-TT J5010-TT J5012-TT J5014-TT J5016-TT J5018-TT J5020-TT J5022-TT J5024-TT J5026-TT J5028-TT J5030-TT J5032-TT J2586 J2591
Description Socket, 3/8" DR 1/4" 12 PT Deep Socket, 3/8" DR 5/16" 12 PT Deep Socket, 3/8" DR 3/8" 12 PT Deep Socket, 3/8" DR 7/16" 12 PT Deep Socket, 3/8" DR 1/2" 12 PT Deep Socket, 3/8" DR 9/16" 12 PT Deep Socket, 3/8" DR 5/8" 12 PT Deep Socket, 3/8" DR 11/16" 12 PT Deep Socket, 3/8" DR 3/4" 12 PT Deep Socket, 3/8" DR 13/16" 12 PT Deep Socket, 3/8" DR 7/8" 12 PT Deep Socket, 3/8" DR 15/16" 12 PT Deep Socket, 3/8" DR 1" 12 PT Deep Socket, Bar 13" Socket, Clip 3/8" DR
AS954E S3.8.1
ASME B107.1
AS954E S3.8.1
3/8” & 1/2” DRIVE 10 PIECE HEX BIT SET
3/8” & 1/2” DRIVE 10 PIECE METRIC HEX BIT SET
Product #: J4900A-TT
Product #: J4900MA-TT
>>3/8 Inch Drive: 1/8, 5/32, 3/16, 7/32, 1/4, 5/16, 3/8 Inch. >>1/2 Inch Drive: 1/2, 9/16, 5/8 Inch. >>Blow-Molded Case. >>Weight (lbs): 3.15
>>3/8 Inch Drive: 4, 5, 6, 7, 8, 9, 10. >>1/2 Inch Drive: 12, 14, 17 mm. >>Blow-Molded Case. >>Weight (lbs): 3.11
Contents J49901/8-TT J49905/32-TT J49903/16-TT J49907/32-TT J49901/4-TT J49905/16-TT J49903/8-TT J54411/2-TT J54419/16-TT J54415/8-TT J4968PB
Description Socket, Hex Bit 3/8" DR 1/8" Socket, Hex Bit 3/8" DR 5/32" Socket, Hex Bit 3/8" DR 3/16" Socket, Hex Bit 3/8" DR 7/32" Socket, Hex Bit 3/8" DR 1/4" Socket, Hex Bit 3/8" DR 5/16" Socket, Hex Bit 3/8" DR 3/8" Socket, Hex Bit 1/2" DR 1/2" Socket, Hex Bit 1/2" DR 9/16" Socket, Hex Bit 1/2" DR 5/8" Blow-Molded Case
*Individual components available for purchase
10
5/8, 11/16, 3/4, 13/16, 7/8, 15/16, 1 Inch.
>>Accessories: 13 Inch Socket Bar with 13 Socket Clips. >>Weight (lbs): 3.64
Contents J4990-4M-TT J4990-5M-TT J4990-6M-TT J4990-7M-TT J4990-8M-TT J4990-9M-TT J4990-10M-TT J5441-12M-TT J5441-14M-TT J5441-17M-TT J4968PB
Description Socket, Hex Bit 3/8" DR 4 mm Socket, Hex Bit 3/8" DR 5 mm Socket, Hex Bit 3/8" DR 6 mm Socket, Hex Bit 3/8" DR 7 mm Socket, Hex Bit 3/8" DR 8 mm Socket, Hex Bit 3/8" DR 9 mm Socket, Hex Bit 3/8" DR 10 mm Socket, Hex Bit 1/2" DR 12 mm Socket, Hex Bit 1/2" DR 14 mm Socket, Hex Bit 3/8" DR 17 mm Blow-Molded Case
*Individual components available for purchase WARNING: WORK SAFELY WITH TOOLS. WEAR SAFETY GOGGLES.
B
>>Proto
A
® 12 Point Sockets are ideal for use on stubborn or damaged fasteners, and also on fasteners made from soft materials. >>TorquePlus™ features apply.
D E L
C
Nut End Outside Dia. (in) (B) 25/64 27/64 15/32 1/2 35/64 41/64 47/64 49/64 13/16 33/64 7/8 61/64 1-1/32 1-1/16 1-3/32 1-3/16 1-1/4 1-5/16
Drive End Outside Dia. (in) (C) 43/64 43/64 43/64 43/64 43/64 43/64 47/64 49/64 13/16 27/32 7/8 61/64 1-1/32 1-1/16 1-3/32 1-3/16 1-1/4 1-5/16
Nut Depth (in) (D) 23/64 21/32 23/64 23/64 23/64 23/64 23/64 23/64 1/2 1/2 33/64 17/32 39/64 39/64 39/64 41/64 49/64 13/16
Bolt Clearance Depth (in) (E) 21/32 21/32 21/32 21/32 21/32 21/32 21/64 11/16 11/16 11/16 11/16 11/16 3/4 3/4 3/4 7/8 7/8 59/64
Overall Length (in) (L) 1-3/32 1-3/32 1-3/32 1-3/32 1-3/32 1-3/32 1-1/8 1-1/8 1-1/8 1-1/8 1-1/8 1-1/8 1-3/16 1-3/16 1-3/16 1-5/16 1-5/16 1-3/8
AS954E S3.8.1
Product # J5206M-TT J5207M-TT J5208M-TT J5209M-TT J5210M-TT J5211M-TT J5212M-TT J5213M-TT J5214M-TT J5215M-TT J5216M-TT J5217M-TT J5218M-TT J5219M-TT J5220M-TT J5221M-TT J5222M-TT J5223M-TT J5224M-TT J5225M-TT J5226M-TT
Size (mm) (A) 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26
Nut End Outside Dia. (in) (B) 25/64 27/64 15/32 33/64 19/32 41/64 45/64 47/64 25/32 27/32 55/64 15/16 61/64 1 1-3/32 1-3/32 1-11/64 1-3/16 1-1/4 1-21/64 1-21/64
Drive End Outside Dia. (in) (C) 43/64 43/64 43/64 43/64 43/64 43/64 45/64 47/64 25/32 27/32 55/64 15/16 61/64 1 1-3/32 1-3/32 1-11/64 1-3/16 1-1/4 1-21/64 1-21/64
Nut Depth (in) (D) 1/4 1/4 1/4 9/32 5/16 21/64 9/32 9/32 15/32 17/32 17/32 17/32 17/32 17/32 5/8 9/16 43/64 47/64 49/64 49/64 49/64
Bolt Clearance Depth (in) (E) 45/64 45/64 45/64 45/64 45/64 45/64 1/2 1/2 7/16 7/16 7/16 7/16 1/2 1/2 1/2 41/64 5/8 5/8 37/64 5/8 59/64
Overall Length (in) (L) 1-3/32 1-3/32 1-3/32 1-3/32 1-3/32 1-3/32 1-1/8 1-1/8 1-1/8 1-1/8 1-1/8 1-1/8 1-3/16 1-3/16 1-3/16 1-9/32 1-5/16 1-5/16 1-5/16 1-3/8 1-3/8
AS954E S3.8.1 +1.800.800.TOOL · Fax: +1.770.648.9108 · www.protoindustrial.com
Weight (lbs) 0.05 0.05 0.05 0.05 0.06 0.06 0.08 0.08 0.09 0.09 0.10 0.13 0.15 0.16 0.17 0.24 0.25 0.27 ASME B107.1
3/8-INCH DRIVE SOCKETS
Product # J5208-TT J5209-TT J5210-TT J5211-TT J5212-TT J5214-TT J5216-TT J5217-TT J5218-TT J5219-TT J5220-TT J5222-TT J5224-TT J5225-TT J5226-TT J5228-TT J5230-TT J5232-TT
Size (in) (A) 1/4 9/32 5/16 11/32 3/8 7/16 1/2 17/32 9/16 19/32 5/8 11/16 3/4 25/32 13/16 7/8 15/16 1
SOCKETS, DRIVE TOOLS & ACCESSORIES
3/8" DRIVE SOCKETS - 12 POINT
Weight (lbs) 0.05 0.05 0.06 0.05 0.06 0.07 0.05 0.07 0.08 0.10 0.10 0.12 0.12 0.14 0.17 0.18 0.22 0.21 0.23 0.29 0.26 ASME B107.5M
11
SOCKETS, DRIVE TOOLS & ACCESSORIES 3/8-INCH DRIVE BIT SOCKETS 12
B A D
3/8" DRIVE DEEP SOCKETS - 12 POINT
E L
>>Proto
® 12 Point Sockets are ideal for use on stubborn or damaged fasteners, and also on fasteners made from soft materials. >>TorquePlus™ features apply.
C
Product # J5008-TT J5010-TT J5012-TT J5014-TT J5016-TT J5018-TT J5020-TT J5022-TT J5024-TT J5026-TT J5028-TT J5030-TT J5032-TT
Size (in) (A) 1/4 5/16 1/4 3/32 1/2 9/16 5/8 11/16 3/4 13/16 7/8 15/16 1
Nut End Outside Dia. (in) (B) 13/32 15/32 35/64 21/32 23/32 51/64 7/8 15/16 1-1/64 1-5/64 1-15/64 1-15/64 1-5/16
Drive End Outside Dia. (in) (C) 21/32 21/32 21/32 21/32 23/32 51/64 7/8 15/16 1-1/64 1-5/64 1-15/64 1-15/64 1-5/16
Nut Depth (in) (D) 5/16 13/32 13/32 7/16 33/64 19/32 43/64 43/64 43/64 43/64 1-3/16 1-3/16 1-3/16
Bolt Clearance Overall Depth (in) Length (in) (E) (L) 1-11/16 2-1/8 1-11/16 2-1/8 1-11/16 2-1/8 1-11/16 2-1/8 1-11/16 2-1/8 1-11/16 2-1/8 2-5/16 2-3/4 2-5/16 2-3/4 2-5/16 2-3/4 2-5/16 2-3/4 2-5/16 2-3/4 2-5/16 2-3/4 2-5/16 2-3/4 AS954E S3.8.1
Weight (lbs) 0.10 0.10 0.10 0.12 0.14 0.18 0.24 0.30 0.33 0.36 0.43 0.46 0.54 ASME B107.1
Product # J5006M-TT J5007M-TT J5008M-TT J5009M-TT J5010M-TT J5011M-TT J5012M-TT J5013M-TT J5014M-TT J5015M-TT J5016M-TT J5017M-TT J5018M-TT J5019M-TT J5020M-TT J5021M-TT J5022M-TT J5023M-TT
Size (mm) (A) 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23
Nut End Outside Dia. (in) (B) 25/64 25/64 15/32 33/64 37/64 21/32 45/64 23/32 25/32 55/64 55/64 15/16 15/16 1-1/64 1-5/64 1-5/64 1-11/64 1-7/32
Drive End Outside Dia. (in) (C) 21/32 21/32 21/32 21/32 21/32 7/16 45/64 23/32 25/32 55/64 55/64 15/16 15/16 1-1/64 1-5/64 1-5/64 1-11/64 1-11/64
Nut Depth (in) (D) 5/16 25/64 25/64 25/64 25/64 1-11/16 33/64 33/64 19/32 21/32 21/32 21/32 21/32 11/16 11/16 11/16 11/16 1-3/16
Bolt Clearance Overall Depth (in) Length (in) (E) (L) 1-13/16 2-1/8 1-47/64 2-1/8 1-47/64 2-1/8 1-47/64 2-1/8 1-47/64 2-1/8 1-47/64 2-1/8 1-39/64 2-1/8 1-39/64 2-1/8 1-17/32 2-1/8 2-7/64 2-3/4 2-7/64 2-3/4 2-7/64 2-3/4 2-7/64 2-3/4 2-1/16 2-3/4 2-1/16 2-3/4 2-1/16 2-3/4 2-1/16 2-3/4 1-37/64 2-3/4 AS954E S3.8.1
Weight (lbs) 0.11 0.09 0.10 0.11 0.12 0.13 0.13 0.13 0.15 0.15 0.24 0.27 0.28 0.30 0.33 0.34 0.45 0.54 ASME B107.5M
WARNING: WORK SAFELY WITH TOOLS. WEAR SAFETY GOGGLES.
Product #: J54211-TT
>>12 Point Standard: 10, 11, 12, 13, 14, 15, 16, 17, 18, 19,
20, 21, 22, 23, 24, 25, 26, 27, 28, 29, 30, 31, 32, 36 mm.
>>Accessories: (2) 17 Inch Socket Bars with 24 Socket Clips. >>Weight (lbs): 7.69
J2592
Socket, Clip 1/2" DR ASME B107.5M
1/2” DRIVE 19 PIECE SOCKET SET - 12 POINT Product #: J54113-TT
>>12 Point Standard: 3/8, 7/16, 1/2, 9/16, 5/8, 11/16,
3/4, 13/16, 7/8, 15/16, 1, 1-1/16, 1-1/8, 1-3/16, 1-1/4, 1-5/16, 1-3/8, 1-7/16, 1-1/2 Inch. >>Accessories: 17 Inch Socket Bar with 19 Socket Clips. >>Weight (lbs): 7.25
Contents J5412-TT J5414-TT J5416-TT J5418-TT J5420-TT J5422-TT J5424-TT J5426-TT J5428-TT J5430-TT J5432-TT J5434-TT J5436-TT J5438-TT J5440-TT J5442-TT J5444-TT J5446-TT J5448-TT J2587 J2592
Description Socket, 1/2" DR 3/8" 12 PT Socket, 1/2" DR 7/16" 12 PT Socket, 1/2" DR 1/2" 12 PT Socket, 1/2" DR 9/16" 12 PT Socket, 1/2" DR 5/8" 12 PT Socket, 1/2" DR 11/16" 12 PT Socket, 1/2" DR 3/4" 12 PT Socket, 1/2" DR 13/16" 12 PT Socket, 1/2" DR 7/8" 12 PT Socket, 1/2" DR 15/16" 12 PT Socket, 1/2" DR 1" 12 PT Socket, 1/2" DR 1-1/16" 12 PT Socket, 1/2" DR 1-1/8" 12 PT Socket, 1/2" DR 1-3/16" 12 PT Socket, 1/2" DR 1-1/4" 12 PT Socket, 1/2" DR 1-5/16" 12 PT Socket, 1/2" DR 1-3/8" 12 PT Socket, 1/2" DR 1-7/16" 12 PT Socket, 1/2" DR 1-1/2" 12 PT Socket, Bar 17" Socket, Clip 1/2" DR ASME B107.1
+1.800.800.TOOL · Fax: +1.770.648.9108 · www.protoindustrial.com
AS954E S3.8.1
1/2-INCH DRIVE BIT SOCKETS
Description Socket, 1/2" DR 10 mm 12 PT Socket, 1/2" DR 11 mm 12 PT Socket, 1/2" DR 12 mm 12 PT Socket, 1/2" DR 13 mm 12 PT Socket, 1/2" DR 14 mm 12 PT Socket, 1/2" DR 15 mm 12 PT Socket, 1/2" DR 16 mm 12 PT Socket, 1/2" DR 17 mm 12 PT Socket, 1/2" DR 18 mm 12 PT Socket, 1/2" DR 19 mm 12 PT Socket, 1/2" DR 20 mm 12 PT Socket, 1/2" DR 21 mm 12 PT Socket, 1/2" DR 22 mm 12 PT Socket, 1/2" DR 23 mm 12 PT Socket, 1/2" DR 24 mm 12 PT Socket, 1/2" DR 25 mm 12 PT Socket, 1/2" DR 26 mm 12 PT Socket, 1/2" DR 27 mm 12 PT Socket, 1/2" DR 28 mm 12 PT Socket, 1/2" DR 29 mm 12 PT Socket, 1/2" DR 30 mm 12 PT Socket, 1/2" DR 31 mm 12 PT Socket, 1/2" DR 32 mm 12 PT Socket, 1/2" DR 36 mm 12 PT Socket, Bar 13" Socket, Bar 17"
SOCKETS, DRIVE TOOLS & ACCESSORIES
1/2” DRIVE 24 PIECE METRIC SOCKET SET - 12 POINT
Contents J5410M-TT J5411M-TT J5412M-TT J5413M-TT J5414M-TT J5415M-TT J5416M-TT J5417M-TT J5418M-TT J5419M-TT J5420M-TT J5421M-TT J5422M-TT J5423M-TT J5424M-TT J5425M-TT J5426M-TT J5427M-TT J5428M-TT J5429M-TT J5430M-TT J5431M-TT J5432M-TT J5436M-TT J2586 J2587
AS954E S3.8.1
13
SOCKETS, DRIVE TOOLS & ACCESSORIES 1/2-INCH DRIVE SOCKET SETS
This socket is securely attached to the ratchet using the Positive Control Pin Detent System. It requires a separate tool, such as a punch pin, to remove the socket from the ratchet.
1/2” DRIVE 19 PIECE DEEP SOCKET SET - 12 POINT Product #: J54105-TT
>>12 Point Deep: 3/8, 7/16, 1/2, 9/16, 5/8, 11/16,
3/4, 13/16, 7/8, 15/16, 1, 1-1/16, 1-1/8, 1-3/16, 1-1/4, 1-5/16, 1-3/8, 1-7/16, 1-1/2 Inch. >>Accessories: 17 Inch Socket Bar with 19 Socket Clips. >>Weight (lbs): 14.00
Contents J5312-TT J5314-TT J5316-TT J5318-TT J5320-TT J5322-TT J5324-TT J5326-TT J5328-TT J5330-TT J5332-TT J5334-TT J5336-TT J5338-TT J5340-TT J5342-TT J5344-TT J5346-TT J5348-TT J2587 J2592
Description Socket, 1/2" DR 3/8" 12 PT Deep Socket, 1/2" DR 7/16" 12 PT Deep Socket, 1/2" DR 1/2" 12 PT Deep Socket, 1/2" DR 9/16" 12 PT Deep Socket, 1/2" DR 5/8" 12 PT Deep Socket, 1/2" DR 11/16" 12 PT Deep Socket, 1/2" DR 3/4" 12 PT Deep Socket, 1/2" DR 13/16" 12 PT Deep Socket, 1/2" DR 7/8" 12 PT Deep Socket, 1/2" DR 15/16" 12 PT Deep Socket, 1/2" DR 1" 12 PT Deep Socket, 1/2" DR 1-1/16" 12 PT Deep Socket, 1/2" DR 1-1/8" 12 PT Deep Socket, 1/2" DR 1-3/16" 12 PT Deep Socket, 1/2" DR 1-1/4" 12 PT Deep Socket, 1/2" DR 1-5/16" 12 PT Deep Socket, 1/2" DR 1-3/8" 12 PT Deep Socket, 1/2" DR 1-7/16" 12 PT Deep Socket, 1/2" DR 1-1/2" 12 PT Deep Socket, Bar 17" Socket, Clip 1/2" DR ASME B107.1
14
AS954E S3.8.1
WARNING: WORK SAFELY WITH TOOLS. WEAR SAFETY GOGGLES.
A
1/2" DRIVE SOCKETS - 12 POINT
D
>>Proto
® 12 Point Sockets are ideal for use on stubborn or damaged fasteners, and also on fasteners made from soft materials.
E L
C
Product # J5410M-TT J5411M-TT J5412M-TT J5413M-TT J5414M-TT J5415M-TT J5416M-TT J5417M-TT J5418M-TT J5419M-TT J5420M-TT J5421M-TT J5422M-TT J5423M-TT J5424M-TT J5425M-TT J5426M-TT J5427M-TT J5428M-TT J5429M-TT J5430M-TT J5431M-TT J5432M-TT J5436M-TT
Size (mm) (A) 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 36
Nut End Outside Dia. (in) (B) 9/16 43/64 47/64 13/16 7/8 61/64 1-1/32 1-3/32 1-11/64 1-1/4 1-21/64 1-13/32 1-31/64 1-9/16 1-39/64 1-21/32 1-25/32 1-59/64 1-63/64
Nut End Outside Dia. (in) (B) 39/64 45/64 47/64 3/4 13/16 55/64 7/8 61/64 61/64 1-1/32 1-3/32 1-3/32 1-11/64 1-13/64 1-1/4 1-9/32 1-21/64 1-13/32 1-31/64 1-31/64 1-9/16 1-39/64 1-39/64 1-31/32
Drive End Outside Dia. (in) (C) 55/64 55/64 55/64 55/64 7/8 61/64 1-1/64 1-5/64 1-3/16 1-1/4 1-5/16 1-25/64 1-31/64 1-17/32 1-37/64 1-41/64 1-5/8 1-5/8 1-5/8
Drive End Outside Dia. (in) (C) 55/64 55/64 55/64 55/64 55/64 55/64 7/8 61/64 61/64 1-1/32 1-3/32 1-3/32 1-11/64 1-13/64 1-1/4 1-9/32 1-21/64 1-13/32 1-31/64 1-31/64 1-17/32 1-39/64 1-39/64 1-31/32
Nut Depth (in) (D) 23/64 23/64 23/64 23/64 9/16 9/16 11/16 11/16 11/16 13/16 27/32 13/16 15/16 59/64 1 27/32 25/32 27/32 27/32
Nut Depth (in) (D) 23/64 23/64 23/64 23/64 23/64 37/64 37/64 37/64 37/64 11/16 11/16 11/16 11/16 25/32 53/64 53/64 55/64 15/16 63/64 63/64 63/64 1-1/16 1-1/8 1-3/8
Bolt Clearance Depth (in) Overall Length (E) (in) (L) 7/8 1-31/64 7/8 1-31/64 7/8 1-31/64 51/64 1-1/2 21/32 1-1/2 21/32 1-1/2 21/32 1-1/2 21/32 1-1/2 45/64 1-9/16 45/64 1-9/16 45/64 1-9/16 25/32 1-5/8 29/32 1-3/4 29/32 1-3/4 7/8 1-3/4 1-19/64 1-55/64 1-19/64 2 1-19/64 2-1/8 1-19/64 2-1/4 AS954E S3.8.1 Bolt Clearance Depth (in) (E) 55/64 55/64 55/64 55/64 7/8 7/8 7/8 7/8 7/8 27/32 27/32 27/32 27/32 59/64 59/64 59/64 63/64 1-3/64 1-5/32 1-5/32 1-5/32 1-5/32 1-7/32 1-39/64
Overall Length (in) (L) 1-31/64 1-31/64 1-31/64 1-31/64 1-1/2 1-1/2 1-1/2 1-1/2 1-1/2 1-1/2 1-1/2 1-1/2 1-17/32 1-17/32 1-17/32 1-17/32 1-39/64 1-43/64 1-25/32 1-25/32 1-25/32 1-25/32 1-27/32 2-15/64
AS954E S3.8.1 +1.800.800.TOOL · Fax: +1.770.648.9108 · www.protoindustrial.com
Weight (lbs) 0.11 0.11 0.11 0.13 0.14 0.15 0.15 0.23 0.26 0.33 0.38 0.42 0.47 0.59 0.66 0.69 0.79 0.98 1.12 ASME B107.1 Weight (lbs) 0.11 0.11 0.11 0.12 0.13 0.13 0.13 0.14 0.17 0.19 0.22 0.24 0.26 0.27 0.28 0.30 0.33 0.39 0.48 0.62 0.63 0.63 0.63 1.04
1/2-INCH DRIVE SOCKET SETS
Product # J5412-TT J5414-TT J5416-TT J5418-TT J5420-TT J5422-TT J5424-TT J5426-TT J5428-TT J5430-TT J5432-TT J5434-TT J5436-TT J5438-TT J5440-TT J5442-TT J5444-TT J5446-TT J5448-TT
Size (in) (A) 3/8 7/16 1/2 9/16 5/8 11/16 3/4 13/16 7/8 15/16 1 1-1/16 1-1/8 1-3/16 1-1/4 1-5/16 1-3/8 1-7/16 1-1/2
SOCKETS, DRIVE TOOLS & ACCESSORIES
B
ASME B107.5M
15
SOCKETS, DRIVE TOOLS & ACCESSORIES 1/2-INCH DRIVE SOCKETS, 1/2 & 3/8-INCH RATCHETS
B A
1/2" DRIVE DEEP SOCKETS - 12 POINT
D
>>Proto
® 12 Point Sockets are ideal for use on stubborn or damaged fasteners, and also on fasteners made from soft materials.
E L
C
Product # J5312-TT J5314-TT J5316-TT J5318-TT J5320-TT J5322-TT J5324-TT J5326-TT J5328-TT J5330-TT J5332-TT J5334-TT J5336-TT J5340-TT J5338-TT J5342-TT J5344-TT J5346-TT J5348-TT
Size (in) (A) 3/8 7/16 1/2 9/16 5/8 11/16 3/4 13/16 7/8 15/16 1 1-1/16 1-1/8 1-1/4 1-3/16 1-5/16 1-3/8 1-7/16 1-1/2
Nut End Outside Dia. (in) (B) 9/16 9/16 47/64 13/16 7/8 31/32 1-3/64 1-3/32 1-11/64 1-1/4 1-21/64 1-13/32 1-1/2 1-9/16 1-35/64 1-7/8 1-7/8 2-1/16 2-1/16
Drive End Outside Dia. (in) (C) 7/8 7/8 55/64 27/32 7/8 31/32 1-3/64 1-3/32 1-11/64 1-1/4 1-21/64 1-13/32 1-1/2 1-9/16 1-35/64 1-5/8 1-5/8 1-5/8 1-5/8
Nut Depth (in) (D) 1/4 23/64 25/32 15/16 1-7/32 1-7/32 1-7/32 1-7/32 1-7/32 1-7/32 1-7/32 1-9/32 1-5/32 1-13/32 1-7/64 27/32 61/64 61/64 1
Bolt Clearance Overall Depth (in) Length (in) (E) (L) 2-39/64 3-1/4 2-39/64 3-1/4 2-39/64 3-1/4 2-39/64 3-1/4 2-39/64 3-1/4 2-39/64 3-1/4 2-39/64 3-1/4 2-39/64 3-1/4 2-39/64 3-1/4 2-39/64 3-1/4 2-29/64 3-1/4 2-29/64 3-1/4 2-29/64 3-1/4 2-29/64 3-1/4 2-1/4 3-1/4 2-1/4 3-1/2 2-1/4 3-1/2 2-1/4 3-1/2 2-1/4 3-1/2 AS954E S3.8.1
Weight (lbs) 0.28 0.28 0.29 0.29 0.30 0.42 0.42 0.52 0.58 0.67 0.67 0.75 0.83 1.06 0.83 1.06 1.23 1.27 1.58 ASME B107.1
3/8” & 1/2” DRIVE PREMIUM PEAR HEAD RATCHETS >>Small pear head design for access in tight, hard to reach work areas. >>45-tooth gear provides balance between 8° articulation angle and high torque carrying capacity.
>>Sealed design helps prevent debris from entering the ratchet
mechanism reducing wear. Also, helps to keep lubrication contained within the components. Patent pending design. >>Low profile reversing lever design for quick, one-hand operation. >>Contoured, ergonomically-designed handle for comfort. Knurled bands allow for increased grip and slip resistance. >>Double nickel chrome plated for enhanced corrosion protection or black oxide finish. >>Field repairable. >>Locking pin Detent to retain Socket during use >>SkyHook™ Ready Product # J5249XL-TT J5250XL-TT J5449XL-TT J5450XL-TT
Drive Size (in) 3/8 3/8 1/2 1/2
Finish Full Polish Full Polish Full Polish Full Polish
SkyHook™-ready through-hole built directly into the handle. Overall Length (in) 8-1/2 11 10-1/2 15
Weight (lbs) 0.86 1.03 1.72 2.18
Repair Kit J5249XLRK J5249XLRK J5449XLRK J5449XLRK ASME B107.500
16
WARNING: WORK SAFELY WITH TOOLS. WEAR SAFETY GOGGLES.
PRECISION TORQUE TORQUE WRENCHES
RATCHETING HEAD MICROMETER TORQUE WRENCHES MEETS ASME STANDARD
>>Calibrated to +/- 3% clockwise direction and +/- 6% counter clockwise direction at 20% to 100% of full scale.
>>Calibration is accomplished by manual loading the torque wrenches.
>>Manufactured to meet standard industrial torque applications, general industry, heavy equipment, and maintenance.
>>Locking pin Detent to retain Socket during use
FT-LBS Product # J6012C-TT J6014C-TT
Drive Size (in) 3/8 1/2
Torque Range (ft-lbs) 20-100 50-250
Increments Head Width Head Depth Overall Storage (ft-lbs) (in) (in) Length (in) Weight (lbs) Case 0.5 1-7/16 1-1/64 17 3.30 J6006PBF 1 1-7/8 1-13/32 27-1/8 5.90 J6014PBF
NOTE: For use with Elastic Bungie or Web Lanyard only.
NM Product # J6006NMC-TT J6016NMC-TT
Drive Size (in) 3/8 1/2
Torque Range (Nm) 16-80 40-200
Increments Head Width Head Depth Overall Storage (Nm) (in) (in) Length (in) Weight (lbs) Case 0.5 1-7/16 1-1/64 15-1/2 3.00 J6006PBF 1 1-7/8 1-13/32 21-1/2 5.00 J6014PBF
NOTE: For use with Elastic Bungie or Web Lanyard only. +1.800.800.TOOL 路 Fax: +1.770.648.9108 路 www.protoindustrial.com
Repair Kit J6006RK J6014RK ASME B107.14M
Repair Kit J6006RK J6014RK ASME B107.14M
17
WRENCHES Proto® Tethered Wrenches are specifically assembled with the correct Heat Shrink Loop, as appropriate, selected from seven different sizes, and fitted for the weight and diameter of the tool. Some wrenches (adjustable and pipe) don’t require the heat shrink. The durable, light loop does not interfere with the function of the tool.
The 8-inch, 10-inch and 12-inch Adjustable Wrenches ship with a SkyHook™ Switch Connector included.
18
WARNING: WORK SAFELY WITH TOOLS. WEAR SAFETY GOGGLES.
WRENCHES
15 PIECE COMBINATION ASD WRENCH SET - 12 POINT Product #: J1200FASD-TT
>>Satin finish provides corrosion resistance and a slip-resistant grip. >>12 point box end allows for fine indexing, helping to improve speed and access. Fits 4, 6 and 12 point fasteners.
>>Anti-Slip Design (ASD) open end. Fractional sizes
11/32” and smaller do not have the ASD feature. ™ system.
>>Box ends incorporate the TorquePlus >>Weight (lbs): 9.75
Size (in) 5/16 3/8 7/16 1/2 9/16 5/8 11/16 3/4 13/16 7/8 15/16 1 1-1/16 1-1/8 1-1/4 Tool Roll
Point Count 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12
Overall Length (in) 5-3/8 6 7 8 8-7/8 9-1/2 10-1/4 11 11-7/8 12-1/2 13-1/4 14 15-1/4 15-7/8 16-7/8 ASME B107.100
15 PIECE METRIC COMBINATION ASD WRENCH SET - 12 POINT
SATIN FINISH COMBINATION
Contents J1210A-TT J1212ASD-TT J1214ASD-TT J1216ASD-TT J1218ASD-TT J1220ASD-TT J1222ASD-TT J1224ASD-TT J1226ASD-TT J1228ASD-TT J1230ASD-TT J1232ASD-TT J1234ASD-TT J1236ASD-TT J1240ASD-TT J25TR34C
Product #: J1200P-MASD-TT
>>Satin finish provides corrosion resistance and a slip-resistant grip. >>12 point box end allows for fine indexing, helping to improve speed and access. Fits 4, 6 and 12 point fasteners.
>>Anti-Slip Design (ASD) open end. Metric sizes
9 mm and smaller do not have ASD feature. ™ system.
>>Box ends incorporate the TorquePlus >>Weight (lbs): 4.25
Contents J1207MA-TT J1208MA-TT J1210MASD-TT J1212MASD-TT J1214MASD-TT J1216MASD-TT J1218MASD-TT J1220MASD-TT J1222MASD-TT J1224MASD-TT J1226MASD-TT J1228MASD-TT J1229MASD-TT J1230MASD-TT J1232MASD-TT J25TR41C
Size (mm) 7 8 10 12 14 16 18 20 22 24 26 28 29 30 32 Tool Roll
Point Count 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12
Overall Length (in) 5-5/32 5-13/32 5-29/32 7-45/64 8-13/16 9-35/64 10-11/16 11-27/64 12-17/32 13-5/16 14-41/64 15-35/64 15-55/64 15-55/64 16-59/64 ASME B107.100
+1.800.800.TOOL · Fax: +1.770.648.9108 · www.protoindustrial.com
19
SATIN FINISH COMBINATION
WRENCHES
SATIN COMBINATION WRENCHES - 12 POINT >>Satin finish provides corrosion resistance and a slip-resistant grip.
>>12 point box end allows for fine indexing, helping to improve speed and access. Fits 4, 6 and 12 point fasteners.
>>Anti-Slip Design (ASD) open end. >>Fractional sizes 11/32" and smaller and sizes
1-5/16" and larger do not have the ASD feature. ™ system.
>>Box ends incorporate the TorquePlus
Product # J1210A-TT J1212ASD-TT J1214ASD-TT J1216ASD-TT J1218ASD-TT J1220ASD-TT J1222ASD-TT J1224ASD-TT J1226ASD-TT J1228ASD-TT J1230ASD-TT J1232ASD-TT J1234ASD-TT J1236ASD-TT
Size (in) 5/16 3/8 7/16 1/2 9/16 5/8 11/16 3/4 13/16 7/8 15/16 1 1-1/16 1-1/8
Throat Depth (in) (B) 3/8 13/32 17/32 39/64 11/16 3/4 13/16 57/64 31/32 1-1/16 1-1/8 1-13/64 1-9/32 1-23/64
Outside Head Width (in) (C) 45/64 13/16 15/16 1-5/16 1-3/16 1-21/64 1-29/64 1-37/64 1-11/16 1-13/16 1-29/32 2-1/64 2-9/64 2-17/64
Head Thickness (in) (D) 3/16 3/16 15/64 1/4 9/32 19/64 5/16 11/32 23/64 3/8 13/32 13/32 29/64 15/32
Outside Head Width (in) (C1) 33/64 39/64 43/64 49/64 3/4 15/16 1-1/64 1-3/32 1-11/64 1-1/4 1-27/64 1-13/32 1-31/64 1-21/32
Head Thickness (in) (D1) 17/64 5/16 21/64 11/32 23/64 13/32 7/16 15/32 1/2 33/64 37/64 37/64 39/64 41/64
Overall Length (in) 5-3/8 6 7 8 8-7/8 9-1/2 10-1/4 11 11-7/8 12-1/2 13-1/4 14 15-1/4 15-7/8 AS 954
Weight (lbs) 0.08 0.11 0.14 0.18 0.21 0.29 0.35 0.41 0.54 0.65 0.74 0.95 1.13 1.38 ASME B107.100
SATIN METRIC COMBINATION WRENCHES - 12 POINT >>Satin finish provides corrosion resistance and a slip-resistant grip.
>>12 point box end allows for fine indexing,
helping to improve speed and access. Fits 4, 6 and 12 point fasteners. >>Anti-Slip Design (ASD) open end. >>Metric sizes 9 mm and smaller and sizes 36 mm and larger do not have the ASD feature. >>Box ends incorporate the TorquePlus™ system.
Product # J1207MA-TT J1208MA-TT J1210MASD-TT J1212MASD-TT J1214MASD-TT J1216MASD-TT J1218MASD-TT J1220MASD-TT J1222MASD-TT J1224MASD-TT J1226MASD-TT J1228MASD-TT J1230MASD-TT J1232MASD-TT
Size (mm) 7 8 10 12 14 16 18 20 22 24 26 28 30 32
Throat Depth (in) (B) 5/16 25/64 31/64 9/16 11/16 3/4 55/64 63/64 1-3/64 1-1/8 1-13/64 1-23/64 1-23/64 1-1/2
Outside Head Width (in) (C) 19/32 11/16 7/8 1 1-3/16 1-21/64 1-33/64 1-11/16 1-25/32 1-57/64 2-1/64 2-17/64 2-17/64 2-33/64
Head Thickness (in) (D) 11/64 3/16 7/32 1/4 9/32 5/16 11/32 23/64 3/8 13/32 27/64 15/32 15/32 33/64
Outside Head Width (in) (C1) 13/32 1/2 21/32 47/64 55/64 15/16 1-1/16 1-3/16 1-17/64 1-11/32 1-27/64 1-21/32 1-21/32 1-49/64
Head Thickness (in) (D1) 15/64 17/64 5/16 11/32 23/64 13/32 29/64 31/64 1/2 35/64 19/32 41/64 41/64 45/64
Overall Length (in) 5-5/32 5-13/32 5-29/32 7-45/64 8-13/16 9-35/64 10-11/16 11-27/64 12-17/32 13-5/16 14-41/64 15-35/64 15-55/64 16-59/64
Weight (lbs) 0.06 0.07 0.11 0.18 0.29 0.26 0.41 0.55 0.62 0.77 0.97 1.37 1.41 1.82 ASME B107.100
20
WARNING: WORK SAFELY WITH TOOLS. WEAR SAFETY GOGGLES.
3 PIECE CLIK-STOP® ADJUSTABLE WRENCH SET >>Clik-Stop
® locking design holds the moving jaw of an adjustable wrench in place when the wrench is in use. >>Satin finish provides corrosion resistance and a slip-resistant grip. >>Extra wide jaw capacity. >>Square jaw opening provides strength and tight fit. >>3 SkyHook™ Lanyards included (JPSS) >>Weight (lbs): 3.08
Contents J708L-TT J710L-TT J712L-TT J25TR22C
Max. Opening (in) 1-1/8 1-5/16 1-1/2 Tool Roll
WRENCHES
Product #: J790-TT
Overall Length (in) 8 10 12 ASME B107.100
SATIN CLIK-STOP® ADJUSTABLE WRENCHES >>Satin finish provides corrosion resistance and a slip-resistant grip. >>Extra wide jaw capacity. >>Square jaw opening provides strength and tight fit. >>Clik-Stop locking design holds the moving jaw of an ®
Product # J708L-TT J710L-TT J712L-TT J715L-TT J718L-TT
Max Opening (in) 1-1/8 1-5/16 1-1/2 1-11/16 2-1/16
Overall Length (in) 8 10 12 15 18
Weight (lbs) 0.57 0.95 1.54 3.13 5.73
ADJUSTABLE
adjustable wrench in place when the wrench is in use. >>J708L-TT, J710L-TT, J712L-TT, included SkyHook™ Lanyard (JPSS) >>J715L-TT, J718L-TT, included Lanyard (JLAN15LBSSCAR)
ASME B107.100
ALUMINUM PIPE WRENCHES >>Light weight aluminum for less job fatigue. >>Standard handle lengths with wide gripping surface for increased comfort and one-hand operation.
>>Forged steel jaw provides outstanding strength. >>Large knurl and power threads provide fast, positive jaw adjustment.
>>Graduation markings on hook jaw show approximate opening for pipe sizes.
>>Riveted jaw pin for safety. >>Hanging hole for storage. >>Field repairable by removing the rivet pin located on the bottom side of the jaw.
>>Replacement parts available. Product # J810A-TT J812A-TT J814A-TT J824A-TT
Max Opening (in) 1-1/2 2 2 4
Overall Length (in) 10 12 14 24
Weight (lbs) 1.10 1.72 2.15 5.65
NOTE: For use with Elastic Bungie or Web Lanyard only. +1.800.800.TOOL · Fax: +1.770.648.9108 · www.protoindustrial.com
21
WRENCHES STRIKING
Each wrench is fitted with the correct weight-rated Proto速 Heat Shrink Loop for the size of the wrench. The wrench is secure and remains strong because no holes are bored through the handle.
22
WARNING: WORK SAFELY WITH TOOLS. WEAR SAFETY GOGGLES.
BLACK OXIDE HEAVY-DUTY OFFSET STRIKING WRENCHES - 12 POINT
C
more efficient transmittal of force to fastener.
D
>>Short handle permits use in close quarters. >>Box opening designed to remain on
WRENCHES
>>Black oxide finish. >>Large striking surface for surer blow contact and E
fastener when wrench is struck.
L
>>For use where extreme force is necessary to loosen or set large fasteners.
>>Heavy box walls provide greater torque transmission. >>Offset handle clears obstructions. >>Non-reflective black oxide finish for use where non-plated products are required.
>>12 point box end allows for fine indexing, helping improve speed and access.
>>Fits most 4, 6 and 12 point fasteners. >>Large striking surface for surer blow contact and
>>For use where extreme force is necessary to loosen or set large fasteners.
more efficient transmittal of force to fastener. >>Short handle permits use in close quarters. >>Box opening designed to remain on fastener when wrench is struck. Size (in) 1-1/16 1-1/8 1-3/16 1-1/4 1-5/16 1-3/8 1-7/16 1-1/2 1-9/16 1-5/8 1-11/16 1-3/4 1-13/16 1-7/8 1-15/16 2 2-1/16 2-1/8 2-3/16 2-1/4 2-5/16 2-3/8
Size (mm) 27 30
35 38
43
51 54 57
Outside Head Width (in) (C) 1-11/16 1-11/16 2-1/16 1-7/8 1-7/8 2-25/64 2-3/16 2-3/16 2-21/32 2-13/32 2-13/32 2-19/32 2-21/32 2-27/32 2-27/32 2-27/32 3-1/8 3-1/8 3-3/8 3-3/8 3-3/8 3-3/8
Head Thickness (in) (D) 5/8 5/8 13/16 13/16 13/16 1 1 1 1-1/8 1-1/8 1-1/8 1-3/16 1-3/16 1-1/4 1-1/4 1-1/4 1-1/4 1-1/2 1-1/2 1-1/2 1-1/2 1-1/2
Offset Height (in) (E) 15/16 15/16 13/16 13/16 13/16 1-1/2 1-1/2 1-1/2 1-7/16 1-1/2 1-1/2 1-9/16 1-9/16 1-21/32 1-7/8 1-21/32 2 2 2 2 2 2
Overall Length (in) 8-1/2 11 10-3/4 10-3/4 11-1/2 12 12 12 12-1/4 12-1/4 13-7/16 13-7/16 13-7/16 13-7/16 13-7/16 13-7/16 13-1/2 13-7/8 13-1/2 13-1/2 13-1/2 13-1/2
Weight (lbs) 1.84 1.79 2.55 2.58 2.59 3.40 3.29 3.35 3.89 4.00 3.88 3.90 5.30 5.24 5.20 5.16 6.82 6.71 6.78 6.30 7.94 7.86
STRIKING
Product # J2617SW-TT J2618SW-TT J2619SW-TT J2620SW-TT J2621SW-TT J2622SW-TT J2623SW-TT J2624SW-TT J2625SW-TT J2626SW-TT J2627SW-TT J2628SW-TT J2629SW-TT J2630SW-TT J2631SW-TT J2632SW-TT J2633SW-TT J2634SW-TT J2635SW-TT J2636SW-TT J2637SW-TT J2638SW-TT
>>Heavy box walls provide greater torque transmission. >>Offset handle clears obstructions.
NOTE: For use with Elastic Bungie or Web Lanyard only.
Product # J2632SWM-TT J2636SWM-TT J2641SWM-TT J2646SWM-TT J2650SWM-TT J2655SWM-TT J2660SWM-TT J2665SWM-TT J2670SWM-TT J2675SWM-TT J2680SWM-TT
Size (mm) 32 36 41 46 50 55 60 65 70 75 80
Outside Head Width (in) (C) 1-57/64 2-13/64 2-13/32 2-43/64 2-53/64 3-25/64 3-25/64 4-1/64 4-1/64 4-29/64 4-29/64
Head Thickness (in) (D) 53/64 63/64 1-7/64 1-3/16 1-17/64 1-1/2 1-1/2 1-1/2 1-1/2 1-57/64 1-57/64
Offset Height (in) (E) 1-3/16 1-1/2 1-1/2 1-37/64 1-21/32 2-1/64 2-1/64 2-1/4 2-1/4 2-41/64 2-41/64
Overall Length (in) 10-3/4 12-1/64 12-1/4 13-27/64 13-27/64 13-1/2 13-1/2 13-1/2 13-1/2 15-63/64 15-63/64
Weight (lbs) 0.88 2.13 2.37 2.81 6.36 6.58 9.19 12.61 12.11 13.53 13.16
NOTE: For use with Elastic Bungie or Web Lanyard only. +1.800.800.TOOL · Fax: +1.770.648.9108 · www.protoindustrial.com
23
STRIKING & STRUCK Striking tools require strength and durability during impact. Proto速 Tether Attachment Points will secure a striking tool without holes or welds that weaken or unbalance properly-made equipment.
The molded textured rubber grip provides a slip-resistance grip and increased control.
Patented Anti-Vibe速 technology delivers greater vibration dampening effect than traditional one-piece steel hammers.
Proto速 specifically positions the Heat Shrink Tether Loop to maximize the range of natural motion during tool use.
24
WARNING: WORK SAFELY WITH TOOLS. WEAR SAFETY GOGGLES.
B L A B L
5 PIECE COLD CHISEL SET Product #: J86CS2-TT
>>Made from S2 steel and specially heat-treated for greater strength and durability. >>Modified parabolic striking end to help reduce mushrooming and chipping. >>Hand ground cutting edge to the exact angle for cutting through tough metals. >>Black oxide finish to help prevent rust corrosion;
STRIKING & STRUCK
A
extending tool life and performance.
>>A polished identification panel on one of the flats is marked with the tool number and size in a black inlay.
>>Set offers a wide range of sizes to handle a variety jobs. >>Includes a pouch for convenient >>Weight (lbs): 1.17 Description 5/8” Cold Chisel 5/16” Cold Chisel 7/16” Cold Chisel 3/8” Cold Chisel 1/2” Cold Chisel Pouch
Tip Width (in) (A) 5/8 5/16 3/8 3/8 1/2
Shank Width (in) (B) 1/2 1/4 5-9/16 5/16 7/16
Overall Length (in) (L) 6-3/4 5-1/8 5-9/16 5-9/16 6
Shank Width (in) (B) 1/4 1/4 5/16 5/16 3/8 3/8 3/8
Overall Length (in) (L) 4-3/8 4-3/4 5-3/16 5-9/16 5-7/8 6-3/8 6-3/4
*Individual components available for purchase
7 PIECE PIN PUNCH SET
PUNCHES & CHISELS
Contents* J86A1/2S2-TT J86A1/4S2-TT J86A3/8S2-TT J86A5/16S2-TT J86A7/16S2-TT J25TR15C-TT
Product #: J47A-TT
>>Made from S2 steel and specially heat-treated for greater strength and durability. >>Two-piece design allows the tip to be hard for durability while allowing it to be produced straight to help prevent binding.
>>Modified parabolic striking end to help reduce mushrooming and chipping. >>Black oxide finish to help prevent rust corrosion; extending tool life and performance.
>>A polished identification panel on one of the flats is marked with the tool number and size in a black inlay.
>>Set offers a wide range of sizes to handle a variety jobs. >>Includes a pouch for convenient storage solution. >>Weight (lbs): 1.15
Contents J471/4X1/16-TT J471/4X3/32-TT J475/16X1/8-TT J475/16X5/32-TT J473/8X3/16-TT J477/16X7/32-TT J471/2X1/4-TT J25TR31C
Description 1/16" Punch Pin 3/32" Pin Punch 1/8" Pin Punch 5/32" Pin Punch 3/16" Pin Punch 7/32" Pin Punch 1/4" Pin Punch Pouch
Tip Width (in) (A) 1/16 3/32 1/8 5/32 3/16 7/32 1/4
ASME B107.410 +1.800.800.TOOL · Fax: +1.770.648.9108 · www.protoindustrial.com
25
STRIKING & STRUCK
A
B L A B L
PUNCH AND CHISEL HOLDER >>Holds punches and chisels up to one inch in diameter reducing the risk of injury.
>>Nylon insert absorbs shock. >>Large four-sided handle. Overall Length (in) (L) 8
Weight (lbs) 0.60
PUNCHES & CHISELS
Product # J2108-TT
DRIVE PIN PUNCHES >>Two-piece design allows the tip to be hard for durability while allowing it to be produced straight to help prevent binding.
>>Reverse taper to help prevent binding. >>Made from S2Â steel and specially heat-treated for greater strength and durability. >>Modified parabolic striking end to help reduce mushrooming and chipping. >>Black oxide finish to help prevent rust corrosion; extending tool life and performance. >>A polished identification panel on one of the flats is marked with the tool number and size in a black inlay.
Product # J471/4X1/16-TT J471/2X1/4-TT J475/16X1/8-TT J473/8X3/16-TT J471/4X3/32-TT J475/16X5/32-TT J477/16X7/32-TT
Tip Width (in) (A) 1/16 1/4 1/8 3/16 3/32 5/32 7/32
Shank Width (in) (B) 1/4 3/8 5/16 3/8 1/4 5/16 3/8
Overall Length (in) (L) 4-3/8 6-3/4 5-3/16 5-7/8 4-3/4 5-9/16 6-3/8
Weight (lbs) 0.05 0.29 0.09 0.15 0.06 0.01 0.22 ASME B107.410
26
WARNING: WORK SAFELY WITH TOOLS. WEAR SAFETY GOGGLES.
STRIKING & STRUCK
D
H
BALL PEIN HAMMERS INDUSTRIAL FIBERGLASS HANDLE
E L
>>Well-balanced professional hammer with
hardened drop-forged head bonded to strong, lightweight fiberglass handle. >>Exclusive Rim-Tempered™ process minimizes chipping from off-center strikes. >>Molded jacket over the fiberglass handle provides maximum overstrike protection. Product # J1316AVP-TT J1324AVP-TT J1332AVP-TT
Head Weight 16 oz. 24 oz. 32 oz.
Overall Length (in) (L) 13 14-3/16 15-1/4
Weight (lbs) 1.54 2.18 2.62 ASME B107.400
BRASS HAMMERS >>Mar-resistant soft brass head helps absorb impact and helps reduce work damage.
>>Spark-resistant for safe use near combustible materials.
PROP 65 WARNING: Handling the brass material on this product exposes you to lead, a chemical known to the State of California to cause cancer and birth defects or other reproductive harm. Wash hands after use.
Product # J1432G-TT J1431G-TT
Head Weight 2.6 lbs. 3.8 lbs.
Face Diameter (in) (D) 1-3/4 2
Head Length (in) (H) 3-1/2 3-5/8
Overall Length (in) (L) 13-3/4 14-3/4
Weight (lbs) 3.45 4.38
HAMMERS
>>Fiberglass handle with ergonomic, non-slip grip.
DEAD BLOW COMPO-CAST® COMBO FACE HAMMERS >>Top welded handle-to-head assembly adds extra durability and safety.
>>Hot urethane Uni-Cast construction outlasts all
other soft face striking tools. Urethane composition provides shape-retaining faces even after repeated striking on hard surfaces and sharp edges. >>Handle is reinforced with solid steel shaft for greater strength safety. >>Top of head molded with a flat surface. >>Dual head design (Standard Dead Blow and Slim-line heads). >>Comfortable dual molded grip. Product # J57-530-TT J57-531-TT J57-532-TT J57-533-TT J57-534-TT
Head Weight 15 oz 21 oz 28 oz 46 oz 56 oz
Face Diameter (in) (D) 1 x 1-1/4 1-1/4 x 1-35/64 1-11/32 x 1-45/64 1-45/64 x 2-3/32 1-61/64 x 2-13/32
Top of head molded with flat surface.
Head Length (in) (H) 3-47/64 4-17/32 5-9/64 5-51/64 6-13/64
Dual head design (standard dead blow and slim-line heads).
Overall Length (in) (L) 10-13/32 11-21/32 13-1/4 14-1/4 15-61/64
Double flange butt handle.
Weight (lbs) 0.90 1.40 1.80 2.95 3.70
NOTE: J57-533-TT & J57-534-TT for use with Elastic Bungie or Web Lanyard only. +1.800.800.TOOL · Fax: +1.770.648.9108 · www.protoindustrial.com
27
TETHERED PLIERS All Proto速 Tethered Pliers integrate a Tether Attachment Point in the handle that sits in the heel of your hand. When the pliers open, the lanyard remains stationary in the hand and promotes a more natural use of the pliers.
XL SERIES PLIERS >>Exclusive Flush Fastener provides better access with
increased user adjustability making it 30% narrower.
>>Flush Fastener allows pliers to lay fl at in the work place and prevents snagging on tool belts/pouches.
>>Flush Fastener is a nut and bolt assembly and can easily be adjusted by the end user in the field.
28
WARNING: WORK SAFELY WITH TOOLS. WEAR SAFETY GOGGLES.
PLIERS
XL SERIES TONGUE & GROOVE >>Jaws are milled with deep self-gripping pipe wrench style teeth for maximum bite.
>>Accurately machined undercut tongue and groove
points for precision movement and joint strength.
Product # J261SGXL-TT J262SGXL-TT J260SGXL-TT J264SGXL-TT J265SGXL-TT
Description Groove Joint Pliers w/Grip - 5” Groove Joint Pliers w/Grip - 7” Groove Joint Pliers w/Grip - 10” Groove Joint Pliers w/Grip - 12” Groove Joint Pliers w/Grip - 16”
Overall Length (in) 5 7 10 12 16
Jaw Thickness (in) 3/16 23/64 27/64 33/64 33/64
Jaw Width (in) 6-21/32 1-9/64 1-27/64 1-29/32 2-15/64
Jaw Length (in) 6-21/32 1-9/64 1-27/64 1-29/32 2-15/64
Weight (lbs) 0.15 0.5 0.94 1.95 2.6
Overall Length (in) 6-1/2 6-1/2 8 8 10 10
Jaw Thickness (in) 13/32 25/64 13/32 13/32 31/64 31/64
Jaw Width (in) 1-1/4 1-1/4 1-1/4 1-1/4 1-19/64 1-5/16
Jaw Length (in) 1-1/4 1-1/4 1-1/4 1-1/4 1-19/64 1-5/16
Weight (lbs) 0.5 0.45 0.64 0.6 0.9 0.9
XL SERIES COMBINATION SLIP-JOINT >>Jaws are milled with deep, sharp, lobster claw design that give two gripping areas with each position.
deep, strong, drop forged knurled impressions making it nonslip. The impressions can also be used to file off a burr when on the go!
Product # J276GXL-TT J2766XL-TT J278GXL-TT J278XL-TT J280GXL-TT J2800XL-TT
Description Slip-Joint Pliers w/Grip - 6" Slip-Joint Pliers w/Natural Finish - 6" Slip-Joint Pliers w/Grip - 8" Slip-Joint Pliers w/Natural Finish - 8" Slip-Joint Pliers w/Grip - 10" Slip-Joint Plier w/ Natural Finish - 10"
XL SERIES PLIERS
>>Combination pliers have shear type cutters >>Non-gripped versions are complemented with
XL SERIES SOLID JOINT >>Jaws are milled with deep, sharp, lobster claw design >>that give two gripping areas with each position. >>Combination pliers have shear type cutters >>Non-gripped versions are complemented with deep, strong, drop forged knurled impressions making it nonslip. The impressions can also be used to file off a burr when on the go!
Product # J206GXL-TT J209GXL-TT J210AHGXL-TT J226GXL-TT J225GXL-TT J228GXL-TT J268GXL-TT
Description Diagonal Cutting Pliers w/Grip - 6" Heavy Duty Diagonal Cutting Pliers w/Grip - 7" Heavy Duty Diagonal Cutting Pliers w/Grip - 8" Needle Nose Pliers w/Side Cutter - 6" Curved Needle Nose Pliers w/Grip - 6-3/4" Needle Nose Pliers w/Grip - 8" Linemans Pliers w/Grip - 8"
+1.800.800.TOOL · Fax: +1.770.648.9108 · www.protoindustrial.com
Overall Length Jaw Thickness (in) (in) 6-1/10 7/16 7-1/4 29/64 8-1/4 29/64 6-1/4 25/64 5-5/8 13/32 8 7/16 8-3/4 9/16
Jaw Width (in) 49/64 1-11/64 1-11/64 11/16 11/16 13/16 1-13/64
Jaw Length (in) 49/64 1-11/64 1-11/64 11/16 11/16 13/16 1-13/64
Weight (lbs) 0.35 0.5 0.4 0.3 0.3 0.4 0.9
29
PLIERS SOFT JAW PLIERS
ma
x
L
SOFT JAW - CANNON PLUG PLIERS >>Capacity of 3/4" to 2-1/2". >>Four position pivot design provides greater concentricity.
>>Replaceable urethane padded jaws protect work piece from marking or scratching
>>Plastisol grips for added comfort. Product # J253G-TT
30
Overall Length (in) (L) 9-1/2
Max. Opening (in) 3/4Â - 2-1/2
Replacement Item 253GRK
Weight (lbs) 0.54
WARNING: WORK SAFELY WITH TOOLS. WEAR SAFETY GOGGLES.
A
B
STRAIGHT JAW LOCKING PLIERS >>Heavy-duty nose. >>Reinforced precisely machined teeth. >>Strong, tough tool. >>Helps provide secure grip for extra tough jobs. >>General purpose for various maintenance situations. >>Locking nut to hold adjustment during repetitive jobs. Product # J293XL-TT
Overall Length (in) (L) 9-1/4
Jaw Width (in) (B) 5/8
Weight (lbs) 1.39
>>Reversible safety wire pliers provide right and left twist capability often eliminating the need for a second plier.
>>Meets SAE Aerospace Standard AS 567 Twister Requirements. >>Provides all of the features of standard Proto Safety Wire Pliers. >>J196 designed for wire sizes .020" - .041". >>J197 designed for wire sizes .020" - .060". >>J198 designed for wire sizes .020" - 0.60". ®
Overall Length (in) (L) 8-3/4
Weight (lbs) 0.64
LOCKING, WIRE TWISTER & WIRE STRIPPER
SAFETY WIRE TWISTER PLIERS - REVERSIBLE
Product # J196-TT
L
PLIERS
C
WIRE STRIPPER - CRIMPER >>Strips 10-22 AWG (American Wire Gauge). >>Box style crimp. >>Crimps insulated and non-insulated terminals for 10-22 AWG.
>>Crimps non-insulated 7 mm and 8 mm auto ignition wire. >>Cuts screw/bolt sizes 4-40, 5-40, 6-32, 8-32, 10-32, 10-24.
>>Anvil type wire cutter for cutting copper wire. >>Air-pocket cushion grips for comfort. Product # J299-TT
Overall Length (in) (L) 8-1/2
Weight (lbs) 0.45
+1.800.800.TOOL · Fax: +1.770.648.9108 · www.protoindustrial.com
31
SCREWDRIVERS & HEX KEYS Proto® Tethered Hex Keys and Screwdrivers feature tool collars that tightly attach to the bar of the tool. Each collar is specifically sized
Tool collars provide 360° of tool movement during use while minimizing lanyard entanglement.
for a tight compression fit on the diameter of the bar.
11 PIECE T-HANDLE HEX KEY SET
6 PIECE METRIC T-HANDLE HEX KEY SET
Product #: J4968
Product #: J4969-TT
>>Weight (lbs): 3.98
>>Weight (lbs): 1.00
Contents J46405-TT J46406-TT J46407-TT J46408-TT J46409-TT J46410-TT J46412-TT J46414-TT J46416-TT J46420-TT J46424-TT
32
Size (in) 5/64 3/32 7/64 1/8 9/64 5/32 3/16 7/32 1/4 5/16 3/8
Handle Length (in) 3 3 3 3 3 3 4 4 4 6 6
Length (in) 6 6 6 6 6 6 6 6 6 6 6
Weight (lbs) 0.11 0.11 0.11 0.14 0.14 0.32 0.32 0.63 0.82 0.89 0.90
Contents J46508-TT J46510-TT J46512-TT J46514-TT J46516-TT J46518-TT
Size (mm) 2 2.5 3 4 5 6
Handle Length (in) 3 3 3 3 4 4
Length (in) 6 6 6 6 6 6
Weight (lbs) 0.11 0.13 0.13 0.14 0.32 0.62
WARNING: WORK SAFELY WITH TOOLS. WEAR SAFETY GOGGLES.
Size (in) 5/64 3/32 7/64 1/8 9/64 5/32 3/16 7/32 1/4 5/16 3/8
T-HANDLE HEX KEYS METRIC
Handle Length (in) 3 3 3 3 3 3 4 4 4 6 6
Length (in) 6 6 6 6 6 6 6 6 6 6 6
6 PIECE METRIC LONG FOLDING HEX KEY SET Product #: J4973-TT
Product # J46508-TT J46510-TT J46512-TT J46514-TT J46516-TT J46518-TT
Size (mm) 2 2.5 3 4 5 6
Length (in) 6 6 6 6 6 6
Weight (lbs) 0.11 0.13 0.13 0.14 0.32 0.62
9 PIECE FOLDING HEX KEY SET Product #: J4993-TT
>>Chrome plated steel case is 4-1/2" long. >>Black oxide bits are 1-7/16" to 2-3/4" long. >>Weight (lbs): 0.47
>>Chrome plated steel case is 6-1/2" long. >>Black oxide bits are 5" long. >>Weight (lbs): 0.84
Hex Size (mm) 3 4 5 6 8 10
Weight (lbs) 0.11 0.11 0.11 0.14 0.14 0.32 0.32 0.63 0.82 0.89 0.90
Length (in) 5 5 5 5 5 5
+1.800.800.TOOL · Fax: +1.770.648.9108 · www.protoindustrial.com
Hex Size (in) 5/64 3/32 7/64 1/8 9/64 5/32 3/16 7/32 1/4
Set Screws #8 #10, #12 – 1/4 – 5/16 3/8 7/16 1/2, 9/16
Fits Cap Screws 1960 Series #2, #3 #4, #5 #6 – #8 #10 1/4 – 5/16
T-HANDLE HEX & FOLDING HEX KEYS
Product # J46405-TT J46406-TT J46407-TT J46408-TT J46409-TT J46410-TT J46412-TT J46414-TT J46416-TT J46420-TT J46424-TT
SCREWDRIVERS & HEX KEYS
T-HANDLE HEX KEYS
Cap Screws 1936 Series #3, #4 #5, #6 – #8 – #10 1/4 5/16 –
33
SCREWDRIVERS & HEX KEYS
PROTO® SCREWDRIVERS
FEATURES AND BENEFITS – QUAD-LOBE
>>Ergonomically designed quad-lobe handle design with 360° texture for additional grip.
QUAD-LOBE SCREWDRIVERS
>>Designed to meet demanding heavy-duty needs of
industrial maintenance and assembly applications. HANDLE >>Impact and chemical resistant handles are foursided with broad but shallow flutes. >>Resistant to most harsh chemicals (including hydraulic fluids used in the aerospace industry). >>Four-sided handle design helps prevent “roll away” from the work surface. SHANK >>High-alloy steel shanks are heat-treated their entire length to help provide strength against twisting action and to help prevent bending and twisting when placed under torque. >>Fully grounded and chemically polished, then chrome plated for corrosion resistance. TIP >>Made of high-alloy steel (same as shank). >>Precision machined for precise fastener fit. >>Finished in black oxide to help prevent cam out and slipping. >>Tips are un-plated with a black oxide finish to help prevent chrome peeling; an important Foreign Object Debris (FOD) concern.
Product # JK14112R-TT JC31604R-TT JK1404R-TT JK51606R-TT JK3808R-TT JK3810R-TT JPP0003R-TT JP0103R-TT JP02112R-TT JP0204R-TT JP0306R-TT JP0408R-TT
Tip Size 1/4 3/16 1/4 5/16 3/8 3/8 0 1 2 2 3 4
Tips Keystone Cabinet Keystone Keystone Keystone Keystone Phillips Phillips Phillips Phillips Phillips Phillips
>>Ergonomically designed handle design for improved grip
>>Black oxide tip prevents chrome peeling
Shank Length (in) (L1) 1-1/2 4 4 6 8 10 3 3 1-1/2 4 6 8
Shank Type Round Round Round Round Round Round Round Round Round Round Round Round
Bolster – – – – – – – – – – – –
Overall Length (in) (L) 3-1/2 7 8 10-3/8 13 11 5-3/4 6-3/4 3-1/2 8 10-3/8 13 ASME B107.600
34
WARNING: WORK SAFELY WITH TOOLS. WEAR SAFETY GOGGLES.
SCREWDRIVERS & HEX KEYS
6 PIECE PHILLIPS® PROTO® SCREWDRIVER SET Product #: J1206SP-TT
>>Quad-lobe features apply.
Description Screwdriver, Phillips Round #0 x 3" Screwdriver, Phillips Round #1 x 3" Screwdriver, Phillips Round, Stubby #2 x 1-1/2" Screwdriver, Phillips Round #2 x 4" Screwdriver, Phillips Round #3 x 6" Screwdriver, Phillips Round #4 x 8"
Tip Size 0 1 2 2 3 4
Tips Phillips® Phillips® Phillips® Phillips® Phillips® Phillips®
Shank Length (in) (L1) 3 3 1-1/2 4 6 8
Shank Type Round Round Round Round Round Round
Overall Length (in) 5-3/4 6-3/4 3-1/2 8 10-3/8 13
ASME B107.600
QUAD-LOBE SCREWDRIVERS
Contents JPP0003R-TT JP0103R-TT JP02112R-TT JP0204R-TT JP0306R-TT JP0408R-TT
6 PIECE SLOTTED PROTO® SCREWDRIVER SET Product #: J1206SSF-TT
>>Quad-lobe features apply.
Contents JK31604S-TT JK14112R-TT JK1404S-TT JK51606S-TT JK3808S-TT JK3812S-TT
Description Screwdriver, Slotted Keystone, Square 3/16" x 4" Screwdriver, Slotted Keystone, Round, Stubby 1/4" x 1-1/2" Screwdriver, Slotted Keystone, Square 1/4" x 4" Screwdriver, Slotted Keystone, Square 5/16" x 6" Screwdriver, Slotted Keystone, Square 3/8" x 8" Screwdriver, Slotted Keystone, Square 3/8" x 12"
Tip Size 3/16 1/4 1/4 5/16 3/8 3/8
Tips Keystone Keystone Keystone Keystone Keystone Keystone
Shank Length (in) (L1) 4 1-1/2 4 6 8 12
Shank Type Square Round Square Square Square Square
Overall Length (in) 7 3-1/2 8 10 13 17
ASME B107.600 +1.800.800.TOOL · Fax: +1.770.648.9108 · www.protoindustrial.com
35
SPECIALTY TOOLS
Specialty tools under 6 lbs can be attached to a SkyHook™ Switch Connector. For heavier tools, elastic lanyards are available.
1-1/2” CARBON SCRAPER >>Impact resistant, extrude Acetate handles are four-sided with broad but shallow flutes.
>>Resistant to most harsh chemicals (including
hydraulic fluids used in the aerospace industry.)
>>Four-sided handle design helps prevent “roll away” from the work surface and are comfortable and easy to hold.
>>High alloy steel 3/8”shanks are heat treated their entire length and black oxide treated for add strength and durability.
Product # J2343-TT
Shank Diameter 3/8”
Blade Width 1-1/2”
Shank Length 6-1/4”
Overall Length 10-3/8”
Weight .50 lbs
Claw Blade Width (B) 1 in (25 mm)
Weight 4.5 lbs (2.04 kg)
Color Yellow
STANLEY® WRECKING BARS >>Forged one-piece steel construction for increased strength and durability.
>>Yellow powder coated claw end for high visibility. >>Beveled chisel end for prying. >>Nail slot on claw end with beveled edge for pulling nails and prying. >>Both chisel and claw end are polished. Product # 55-130-TT
36
Overall Length 30 in (760 mm)
Claw Blade Width (A) 1-1/4 in (32 mm)
WARNING: WORK SAFELY WITH TOOLS. WEAR SAFETY GOGGLES.
SPECIALTY TOOLS
HEAVY-DUTY PISTOL GRIP GREASE GUN >>3-way filling: bulk, cartridge, or filler pump. >>16 oz. bulk fill. >>14 oz. standard cartridge. >>Heavy-duty 1.7 mm thick seamless barrel to avoid dents. >>Aluminum head reduces weight. >>Heavy-duty flexible 18" nylon hose and 6" metal spout for easy use. >>Output pressure: 3,600 PSI. Product # JFC33HD-TT
Overall Length (in) 16
Weight (lbs) 3.86
STANLEY® HIGH TENSION LOW PROFILE HACKSAW MISCELLANEOUS
>>Arc-shaped frame enables cutting in hard-to-reach areas. >>4” throat depth cuts large PVC pipes. >>Heavy-duty, lightweight, die-cast aluminum I-beam frame provides strength and durability.
>>Ergonomically designed handle for comfortable use. >>Tension knob makes blade tension adjustment easy. >>45° and 90° cutting angles add flexibility. >>Hacksaw blade included (15-631): 1. Product # 20-001K-TT
Blade Length 12 in (305 mm)
Throat Depth 4 in (102 mm)
STANLEY® SELF-RETRACTING SAFETY BLADE UTILITY KNIFE >>Durable, all-metal knife body construction. >>Machine screw firmly holds knife body together - Screwdriver required for blade change.
>>Contoured handle and textured, die-cast body for slip-resistance. >>Interlocking nose design helps secure blade and helps prevent body separation. >>Comes with hang-hole for adding a wrist strap or lanyard. >>Auto-retracting blade: spring-loaded. Retracts when slide button is released. >>Blades included (11-987): 1. >>Works with most standard utility blades. Product # 10-189C-TT
Length 5-7/8 in (149 mm)
Body Color Orange
+1.800.800.TOOL · Fax: +1.770.648.9108 · www.protoindustrial.com
Auto Retracting Blade Feature.
Interlocking Nose Feature.
2195 East View Parkway Suite 103 Conyers, Georgia 30013 1-800-800-TOOL 1-770-648-9108 FAX www.protoindustrial.com/tethered
2195 East View Parkway Suite 103 Conyers, Georgia 30013 Š2013 Stanley Black & Decker, Inc. IARPROTOTTLSBR
1-800-800-TOOL 1-770-648-9108 FAX www.protoindustrial.com/tethered