Marbletrend - Bath Screens - 20101201 by [id] digital agency

www.marbletrend.com.au

Marbletrend Technical Manual 2011

Shower Bases

•

Shower s

•

Baths

• Vanities

•

Sanitar y-ware

•

Basins

Contents SHOWER BASES Aquaseal.........................................................3 Aruba................................................................5 Aztec.................................................................6 Easy RX...........................................................9 Easy Select RX..........................................11 Evo..................................................................13 Hampton.....................................................16 Maquarie......................................................19 Project...........................................................20 Select.............................................................25 Tile Tray........................................................27 SHOWER SYSTEMS Aruba 2000................................................32 Aruba 2000 NEO..................................37 Boston 2000..............................................41 Boston 2000 NEO.................................46 Boston Shower Panel...........................50 Carra 2000 Squared.............................52 Carra 2000 Curved...............................57 Easy Select RX..........................................63 Fresh 2000 Square.................................70 Fresh 2000 NEO....................................75 Fresh 2000 Curved...............................80 Hampton.....................................................85 Hampton NEO........................................86 Jamaica..........................................................87 Kakadu 2000..............................................91 Kakadu 2000 Front Only....................92 Kakadu 2000 NEO Corner...............97 Kakadu Deluxe...................................... 101 Kakadu Shower Panel........................ 106 Lido 2000................................................. 108 Lideo 2000 NEO................................. 113 Project 1830........................................... 117 Pure 2000................................................ 121 Pure 2000 Walk-in.............................. 126 Randwick.................................................. 132 Randwick NEO..................................... 137 Select Slider............................................ 141 Sienna Ciara Curved......................... 150 Sienns Ciara Corner Entry............. 156 Sienna Budget........................................ 161 Sienna Bliss.............................................. 166 Acrylic Shower Walls......................... 171 SHOWER ENCLOSURES SE 2.............................................................. 172 SE 5.............................................................. 173 SE 10........................................................... 174 SE11............................................................ 175 SE 15........................................................... 176 SE 20........................................................... 177 SE 25........................................................... 178 SE 26........................................................... 179 SE 28/29.................................................... 180 SE 30........................................................... 181

2 SE 35........................................................... 182 SE 38........................................................... 183 SE 41........................................................... 184 SE 46........................................................... 185 SE 55........................................................... 186 SE 79........................................................... 187 BATHS Allure II 1700......................................... 189 Concept 1675....................................... 191 Edge 1500 & 1800.............................. 192 Fresh 1500 & 1700............................. 194 Mathieson Freestanding................... 196 Merge Freestanding............................ 198 Merge 1750............................................ 200 Project 1500........................................... 201 Project 1675........................................... 202 Pure1800.................................................. 203 Randwick 1500..................................... 204 Randwick 1675..................................... 205 Select 1800............................................. 206 Traditional Highback 1500.............. 207 Traditional 1680.................................... 208 Traditional Highback 1760.............. 209 Traditional Double High Back Bath...................................... 210 BATH SCREENS Aruba.......................................................... 212 Hampton Fix’n’ Fold........................... 215 Kakadu Deluxe...................................... 216 Marriot....................................................... 218 Tiffany......................................................... 221 Pure Bath Screen................................. 222 Pure Fix’n’Fold....................................... 224 Trend Standard..................................... 227 Trend Fix and Fold.............................. 228 Trend Bi-Fold.......................................... 231 VANITIES Boston 450.............................................. 234 Boston 600.............................................. 235 Boston 750.............................................. 236 Boston 900.............................................. 237 Boston 1200........................................... 238 Carra 750................................................. 239 Carra 900................................................. 241 Carra 1200.............................................. 243 Casey Semi Recessed........................ 245 Fresh 420.................................................. 246 Fresh 660.................................................. 247 Fresh 900.................................................. 248 Linea Lucca.............................................. 249 Noosa......................................................... 250 Pure 600................................................... 251 Pure 900................................................... 252 Pure 1200................................................ 253 Pure 1200 Double.............................. 254

PVC 600................................................... 255 Randwick.................................................. 256 Select 900 / Pure Basin.................... 257 Select 1200 / Pure Basin.................. 258 Select 900 / Select Top..................... 259 Select 1200 / Select Top.................. 260 Simplicity 600 / Solid Door..................261 Simplicity 600 / Glass Door.................262 Simplicity 750 / Solid Door..................263 Simplicity 750 / Glass Door.................264 Simplicity 900 / Solid Door..................265 Simplicity 900 / Glass Door.................266 Simplicity 1200 / Solid Door..............267 Simplicity 1200 / Glass Door..............268 Swansea..................................................... 269 Uni Cab..................................................... 270 MIRRORS Classic......................................................... 272 Fresh............................................................ 273 CABINETS Boston........................................................ 274 Select Horizontal & Vertical Shaving ............................... 275 Select Round Shaving........................ 276 Select Square Shaving........................ 277 Swansea..................................................... 278 SANITARYWARE Florence Toilet Suite........................... 279 Genova Toilet Suite............................. 281 Project Toilet Suite............................... 284 Sian Toilet Suite..................................... 286 Trento MK II............................................ 288 Tuscan Toilet Suite............................... 289 BASINS Amalfi Pedestal...................................... 291 Amore........................................................ 293 Balwyn........................................................ 294 Carra........................................................... 295 Casey.......................................................... 297 Petite........................................................... 298 Project........................................................ 299 Project Semi Recessed..................... 300 Pure 600................................................... 301 Pure 1000................................................ 302 Quadro...................................................... 303 Select 420 Square............................... 304 Select 480 Square............................... 305 Select 440 Round................................ 306 Select Vanity Top................................... 306 Stelle............................................................ 307 Trend........................................................... 308 Trend Vanity Top................................... 309 Westminster........................................... 310

189

Allure II Bath

FEATURES & BENEFITS > One piece bath > Adjustable feet > Material Acrylic - light weight > Smooth finish - easy cleaning > Includes overflow > 40mm waste (not included) SIZS > 1700 L x 800W x 600 H CODES ABWHWH2 Allure 1700 Bath COLOUR > White VOLUME > 275 litres WASTE > 40mm (not included) WEIGHT > 34kg MANUFACTURING MATERIALS > Acrylic and Fibreglass

600

R12

R110

1700

480

R60

18 R90

1540

1700 1540 1180 240

800 640

500

R60

800 640

o51

4 x R60 4 x R60

R90 740

4 x R90

Allure II Bath Installation Instructions 1 Ensure legs are adjusted in line with the base of bath.

Assemble the bath on a mat to ensure against any damage 2 Check that the bath sits flat; if required, adjust legs to

compensate for floor level. 3 Before step 4 set waste connection in position. 4 With a pencil, trace the outline of the bath. 5 Apply a thick bead of silicone within bath outline.

Use the appropiate silicone for the surface type. 6 Set bath in final position. Allow 24 hours to set. Do

not use within this time.

190

191

Concept 1675 Bath

FEATURES & BENEFITS > The support feet mean that this product does not require a mortar bed, by having the support feet you can simply silicone the bath directly to the floor > Deeper and wider than the project bath > Internal arm rest supports for your comfort > Anti skid surface SIZE > 1675mm x 750mm x 435mm > Internal depth 420mm Rim 75mm CODES BCWHWH Concept 1675 Bath

1675

COLOUR > White 75

215

WEIGHT > 35kg

INSTALLATION INSTRUCTIONS Check that your floor is level and secure.Your Marbletrend bath does not need to be supported by a mortar bed. To adhere your bath to the floor, simply run a generous bead of silicone along the timber support and allow sufficient time to cure. Timber supports must have full contact with floor to achieve correct support for bath. 1. Place bath into position and ensure that the bath is level. The rim around the bath and the base must be fully supported. If the bath is being checked into an adjoining wall, make sure the wall is rebated to a depth that will allow the tiling bead to be checked in. 2. The front edge and sides of the bath are to be supported by a mini wall that can be constructed out of timber or masonry. Failure to follow our instalation guide will void the waranty. Carefuly inspect your bath prior to instalation as no claims will be acepted if the product has ben instaled. NB. Specifications are subject to change without prior notice. We recommend that hot water applied to this product does no exceed 55oC

420 420

405

118

405

118

TILE BACKING SHEET

TILE SILICONE SEALANT

50 x 25 BATTEN

TIMER STUD

SILICONE SEALANT

TILE TILE BACKING SHEET BATH

MASONRY OR STUD WALL FLOOR

435 435

45 45

95 15 15

435 435

MANUFACTURING MATERIALS > Acrylic and Fibreglass

420 420

WASTE > 40mm (not included)

750

VOLUME > 230 litres

Edge Bath

192

FEATURES & BENEFITS > One piece bath > Adjustable feet > Material Acrylic - light weight > Smooth finish - easy cleaning > Includes overflow > 40mm waste (not included) SIZS > 1500 L x 800W x 600 H > 1800 L x 800W x 600 H CODES EDWHWHS Edge 1500 Bath EDWHWH Edge 1800 Bath COLOUR > White VOLUME > 1500 235L > 1800 295L WASTE > 40mm (not included) WEIGHT > 1500 31kg > 1800 41kg MANUFACTURING MATERIALS > Acrylic and Fibreglass R5

1500 + 5 / 1800 + 5

480 R25

600 + 5

R15 1340 1500 + 5 / 1800 + 5 1340 / 1640 980 / 1280

800 + 5 640 500

240

800 640

740

o51 4 x R25

4 x R25

193

Edge Bath Installation Instructions

1 Ensure legs are adjusted in line with the base of bath.

Assemble the bath on a mat to ensure against any damage 2 Check that the bath sits flat; if required, adjust legs to

compensate for floor level. 3 Before step 4 set waste connection in position. 4 With a pencil, trace the outline of the bath. 5 Apply a thick bead of silicone within bath outline.

Use the appropiate silicone for the surface type. 6 Set bath in final position. Allow 24 hours to set. Do

not use within this time.

Fresh Bath

194

FEATURES & BENEFITS > One piece bath > Adjustable feet > Material Acrylic - light weight > Smooth finish - easy cleaning > Includes overflow > 40mm waste (not included) SIZS > 1500 L x 800W x 540 H > 1700 L x 800W x 540 H CODES FRWHWHS Edge 1500 Bath FRWHWH Fresh 1700 Bath COLOUR > White VOLUME > 1500 178L > 1700 213L WASTE > 40mm (not included) WEIGHT > 1500 30kg > 1700 33kg MANUFACTURING MATERIALS > Acrylic and Fibreglass

540+5

420

R40 1200 / 1400

100

540+5

o51

R330

680

R400

500 660 800 + 5

800 + 5 660

250

1500 + 5 / 1700 + 5 1360 / 1560 960 / 1160

195

Fresh Bath Installation Instructions

1 Ensure legs are adjusted in line with the base of bath.

Assemble the bath on a mat to ensure against any damage 2 Check that the bath sits flat; if required, adjust legs to

compensate for floor level. 3 Before step 4 set waste connection in position. 4 With a pencil, trace the outline of the bath. 5 Apply a thick bead of silicone within bath outline.

Use the appropiate silicone for the surface type. 6 Set bath in final position. Allow 24 hours to set. Do

not use within this time.

â&#x153;&#x201C;

Mathieson Freestanding Bath

196

FEATURES & BENEFITS > Available in 2 models, Freestanding & Inset > Smooth lines for easy cleaning > Centre waste > Dual lumber support > Timeless design > Easy to install > Adjustable feet SIZE > 1750mm x 800mm x 600mm H internal depth 450mm > Rim 75mm

150±5

COLOUR > White

40±2

450±5

Mathieson Freestanding Bath With Overflow

1565 mm

450±5

WEIGHT > 40kg

400

1±

ø5

1200 mm

267 mm

MANUFACTURING MATERIALS > Acrylic & Fibreglass > Feet: Galvanised steel

1±

ø5

800±5

WASTE > 40mm (not included)

192 mm

460 mm

650 mm

VOLUME > 250 litres

1740 mm 875 mm

40±2

790±5 80 mm

30 mm

500.00 mm

800±5

400

600±5

1350 mm

1350 mm 280 mm

1730

280 mm 1730

790±5 80 mm

80 mm

280 mm

30 mm

500 mm

1730

210 mm

875 mm

210 mm

1740 mm

External Detail

210 mm

CLEANING Warm soapy water or mild household cleaners will 1 be 1± ø5 sufficient to remove most marks or residue. For persistent stains or to rejuvenate the surface use Marbletrend Ultragloss polish. Do not use cleaning products such as, harsh abrasive cleaners, dry cleaning fluids, glass cleaning sprays, or Ammonia compounds. We advise that you refer to any cleaning product warning labels.

600±5

1350 mm

150±5

450±5

605±5

1740 mm

500.00 mm

CODES MBWHWH MBWHWHO

Internal Detail

197

Mathieson Installation Instructions

Your Marbletrend Bath is a two piece unit, please inspect before installation. No claims will be accepted after installation.

IT IS RECOMENDED THE BATH NOT BE USED FOR 24 HOURS TO ENSURE SILICONE HAS FULY CURED.

1. To separate the bath shell from the bottom surround, lift bath shell up and out of bottom surround.

NB. Specifications are subject to change without prior notice. We recommend that hot water applied to this product does no exceed 55oC

2. Once the position of the bath has been determined fix bottom surround to the floor in 6 points as per diagram 1. For timber floors it is recommended to use 8 gauge flat head screws, for concrete floors it is recommended to use 6mm dyna bolts. 3. Trial fit inner shell to outer shell and ensure all feet are touching the ground, adjust if necessary. 4. To fit the bath shell to the bottom surround turn the bath upside down (place some protection on the floor to ensure the bath surface incurs no damage). 5. Place a generous amount of non acidic silicone on the underside rim of the bath.This is required for when the inner and outer shell are joined back together. 6. Turn bath shell over and lift into position over the bottom surround and ensure contact is made between the silicone on the bath shell and the bath surround.

605Âą5

7. Connect trap to waste, (for timber floor connect from underneath floor, for concrete floor glue installation is required). It is recommended a plumber is consulted for concrete floor installation.

Merge Freestanding Bath

198

150±5

40±2

Merge Freestanding With Overflow

40±2

450±5

1565 mm

450±5

150±5

COLOUR > White

WEIGHT > 40kg

400

1±

ø5

1±

ø5

800±5

WASTE > 40mm (not included)

192 mm

460 mm

650 mm

VOLUME > 250 litres

1200 mm

267 mm

1740 mm 875 mm

MANUFACTURING MATERIALS > Acrylic & Fibreglass > Feet: Galvanised steel 40±2

790±5 80 mm

500.00 mm

800±5

30 mm

600±5

1350 mm

1350 mm 280 mm

1730

280 mm 1730

790±5 80 mm

80 mm

280 mm

30 mm

500 mm

210 mm

1730 210 mm

875 mm

30 mm

REPAIRS The baths can only be repaired by an outside source, i.e: Mend a Bath.

400

210 mm

External Detail

1± CLEANING ø5 Warm soapy water or mild household cleaners will be sufficient to remove most marks or residue. For persistent stains or to rejuvenate the surface use Marbletrend Ultragloss polish. Do not use cleaning products such as, harsh abrasive cleaners, dry cleaning fluids, glass cleaning sprays, or Ammonia compounds. We advise that you refer 1740 mm to any cleaning product warning labels.

600±5

1350 mm

150±5

450±5

605±5

1740 mm

500.00 mm

CODES MBWHWH MBWHWHO

Internal Detail

199

Merge Freestanding Installation Instructions

MERGE FREESTANDING ACRYLIC BATH Your Marbletrend Merge Bath is a two piece unit, please inspect before installation. No claims will be accepted after installation. 1. To separate the bath shell from the bottom surround, lift bath shell up and out of bottom surround. 2. Once the position of the bath has been determined fix bottom surround to the floor in 6 points as per diagram 1. For timber floors it is recommended to use 8 gauge flat head screws, for concrete floors it is recommended to use 6mm dyna bolts. 3. Trial fit inner shell to outer shell and ensure all feet are touching the ground, adjust if necessary. 4. To fit the bath shell to the bottom surround turn the bath upside down (place some protection on the floor to ensure the bath surface incurs no damage). 5. Place a generous amount of non acidic silicone on the underside rim of the bath.This is required for when the inner and outer shell are joined back together. 6. Turn bath shell over and lift into position over the bottom surround and ensure contact is made between the silicone on the bath shell and the bath surround.

605Âą5

7. Connect trap to waste, (for timber floor connect from underneath floor, for concrete floor glue installation is required). It is recommended a plumber is consulted for concrete floor installation.

IT IS RECOMENDED THE BATH NOT BE USED FOR 24 HOURS TO ENSURE SILICONE HAS FULY CURED. NB. Specifications are subject to change without prior notice. We recommend that hot water applied to this product does no exceed 55oC

Merge 1750 Island Bath

200

FEATURES & BENEFITS > Island bath > Centre waste > No mortar bed required for support > Rounded corners enables the creation of a modern island design > Freestanding option available > Smooth lines for easy cleaning SIZE > 1750mm x 800mm x 450mm D Rim 75mm 1565 mm

40±2

450±5

VOLUME > 250 litres

650 mm

1565 mm

450±5

COLOUR > White

40±2

CODES BMWHWH Merge 1750 Island Bath

460 mm

650 mm

INSTALLATION INSTRUCTIONS Check that your floor is level and secure. Your Marbletrend bath does not need to be supported by a mortar bed. To adhere your bath to the floor, simply spread tile adhesive around the timber supports and allow sufficient time to cure. 1. Place bath into position and ensure that the bath is level. 1 1± The rim around the bath and the base must be fully ø5 192 mm supported. 2. Seal around bath rim with silicone(see diagram). Failure to follow our instalation guide will void the waranty. Carefuly inspect your bath prior to instalation as no claims will be acepted if the product267 hasmmben instaled. NB. 1200 mm Specifications are subject to change without prior notice. We recommend that hot water applied to this product 1740 mm does no exceed 55oC

±1

460 mm

1 ø5

192 mm

1200 mm

267 mm

1200 mm

267 mm 1740 mm

1740 mm

650 mm

(2) silicone sealant tiles

75 mm villaboard/ wr plaster board

tiles

bath

stud wall

floor

800±5

75 mm

1±

ø5

800±5

450±5

GUARANTEE > Baths come with a 5 year guarantee > Marbletrend will replace this product if a fault is shown 1565 mm to be caused by faulty manufacturing or materials, prior to correct installation > This guarantee does not include removal & installation costs

650 mm

MANUFACTURING MATERIALS > Acrylic > Fibreglass

192 mm

40±2

650 mm

WEIGHT > 24kg

460 mm

WASTE > 40mm (not included)

201

Project 1500 Inset Bath

FEATURES & BENEFITS > Heat retaining finish and Anti skid surface > No mortar bed required for support > Traditional bath of classic style for general purpose applications, featuring a comfortable lumbar support and easy to clean contours SIZE > 1500mm x 723mm x 415mm D > Internal depth 395mm Rim 65mm CODES BPWHWHS Project 1500 Inset Bath COLOUR > White VOLUME > 215 litres WASTE > 40mm (not included) WEIGHT > 17kg MANUFACTURING MATERIALS > Acrylic and Fibreglass GUARANTEE > Baths come with a 5 year guarantee > Marbletrend will replace this product if a fault is shown to be caused by faulty manufacturing or materials, prior to correct installation This guarantee does not include removal and installation costs. INSTALLATION INSTRUCTIONS Check that your floor is level and secure.Your Marbletrend bath does not need to be supported by a mortar bed. To adhere your bath to the floor, simply run a generous bead of silicone along the timber support and allow sufficient time to cure. Timber supports must have full contact with floor to achieve correct support for bath. 1. Place bath into position and ensure that the bath is level. The rim around the bath and the base must be fully supported. If the bath is being checked into an adjoining wall, make sure the wall is rebated to a depth that will allow the tiling bead to be checked in. 2. The front edge and sides of the bath are to be supported by a mini wall that can be constructed out of timber or masonry. Failure to fllow our instalation guide will void the waranty. Carefuly inspect your bath prior to instalation as no claims will be acepted if the product has ben instaled. NB. Specifications are subject to change without prior notice. We recommend that hot water applied to this product does no exceed 55oC

TILE BACKING SHEET

TILE SILICONE SEALANT

50 x 25 BATTEN

TIMER STUD

SILICONE SEALANT

TILE TILE BACKING SHEET BATH

MASONRY OR STUD WALL FLOOR

Project 1675 Inset Bath

202

FEATURES & BENEFITS > Heat retaining finish and Anti skid surface > No mortar bed required for support > Traditional bath of classic style for general purpose applications, featuring a comfortable lumbar support and easy to clean contours SIZE > 1675mm x 738mm x 415mm D > Internal depth 395mm Rim 65mm CODES BPWHWH Project 1675 Inset Bath COLOUR > White VOLUME > 230 litres WASTE > 40mm (not included) WEIGHT > 19kg MANUFACTURING MATERIALS > Acrylic and Fibreglass GUARANTEE > Baths come with a 5 year guarantee > Marbletrend will replace this product if a fault is shown to be caused by faulty manufacturing or materials, prior to correct installation This guarantee does not include removal and installation costs. INSTALLATION INSTRUCTIONS Check that your floor is level and secure.Your Marbletrend bath does not need to be supported by a mortar bed. To adhere your bath to the floor, simply run a generous bead of silicone along the timber support and allow sufficient time to cure. Timber supports must have full contact with floor to achieve correct support for bath. 1. Place bath into position and ensure that the bath is level. The rim around the bath and the base must be fully supported. If the bath is being checked into an adjoining wall, make sure the wall is rebated to a depth that will allow the tiling bead to be checked in. 2. The front edge and sides of the bath are to be supported by a mini wall that can be constructed out of timber or masonry. Failure to fllow our instalation guide will void the waranty. Carefuly inspect your bath prior to instalation as no claims will be acepted if the product has ben instaled. NB. Specifications are subject to change without prior notice. We recommend that hot water applied to this product does no exceed 55oC

TILE BACKING SHEET

TILE SILICONE SEALANT

50 x 25 BATTEN

TIMER STUD

SILICONE SEALANT

TILE TILE BACKING SHEET BATH

MASONRY OR STUD WALL FLOOR

203

Pure 1800 Island Bath

FEATURES & BENEFITS > Island bath > No mortar bed required for support > Simple to install > Centre waste > Dual headrest SIZE > 1800mm x 800mm x 450mm D (to rim) Rim 85mm CODES BPUWHWH Pure 1800 Island Bath 80

40±2 40±2

COLOUR > White VOLUME > 260 litres

20 R1 2 R1

WASTE > 40mm (not included)

51±1 51±1

R6 0 R6

1080

1080 R1

0 R 2

WEIGHT > 25kg

800±5 800±5

MANUFACTURING MATERIALS > Acrylic > Fibreglass GUARANTEE > Baths come with a 5 year guarantee 80 > Marbletrend will replace this product if a fault is shown to be caused by faulty manufacturing or materials, prior to correct installation > This guarantee does not include removal & installation costs

1800

+5 -10

INSTALLATION INSTRUCTIONS 51±1 Check that your floor is level and secure. Your Marbletrend 1080 bath does not need to be supported by a mortar bed. To adhere your bath to the floor, simply spread tile adhesive R1 5 around the timber supports and allow sufficient time to cure. 1. Place bath into position and ensure that the bath is level. The rim around the bath and the base must be fully supported. 2. Seal around bath rim with silicone(see diagram). Failure to follow our instalation guide will void the waranty. Carefuly inspect your bath prior to instalation as no claims will be acepted if the product has ben instaled. NB. Specifications are subject to change without prior notice. 1800 We recommend that hot water applied to this product o does no exceed 55 C

480±5

40±2

640

(2) silicone sealant tiles

800±5

villaboard/ wr plaster board

tiles

bath

stud wall

+5 -10

floor

Randwick 1500 Inset Bath

204

FEATURES & BENEFITS > Heat retaining finish and Anti skid surface > No mortar bed required for support > Traditional bath of classic style for general purpose applications, featuring a comfortable lumbar support and easy to clean contours SIZE > 1500mm x 723mm x 415mm D > Internal depth 395mm Rim 65mm CODES BPWHWHS Randwick 1500 Inset Bath COLOUR > White VOLUME > 215 litres WASTE > 40mm (not included) WEIGHT > 17kg MANUFACTURING MATERIALS > Acrylic and Fibreglass GUARANTEE > Baths come with a 5 year guarantee > Marbletrend will replace this product if a fault is shown to be caused by faulty manufacturing or materials, prior to correct installation This guarantee does not include removal and installation costs. INSTALLATION INSTRUCTIONS Check that your floor is level and secure.Your Marbletrend bath does not need to be supported by a mortar bed. To adhere your bath to the floor, simply run a generous bead of silicone along the timber support and allow sufficient time to cure. Timber supports must have full contact with floor to achieve correct support for bath. 1. Place bath into position and ensure that the bath is level. The rim around the bath and the base must be fully supported. If the bath is being checked into an adjoining wall, make sure the wall is rebated to a depth that will allow the tiling bead to be checked in. 2. The front edge and sides of the bath are to be supported by a mini wall that can be constructed out of timber or masonry. Failure to fllow our instalation guide will void the waranty. Carefuly inspect your bath prior to instalation as no claims will be acepted if the product has ben instaled. NB. Specifications are subject to change without prior notice. We recommend that hot water applied to this product does no exceed 55oC

TILE BACKING SHEET

TILE SILICONE SEALANT

50 x 25 BATTEN

TIMER STUD

SILICONE SEALANT

TILE TILE BACKING SHEET BATH

MASONRY OR STUD WALL FLOOR

205

Randwick 1675 Inset Bath

FEATURES & BENEFITS > Heat retaining finish and Anti skid surface > No mortar bed required for support > Traditional bath of classic style for general purpose applications, featuring a comfortable lumbar support and easy to clean contours SIZE > 1675mm x 738mm x 415mm D > Internal depth 395mm Rim 65mm CODES BPWHWH Randwick 1675 Inset Bath COLOUR > White VOLUME > 230 litres WASTE > 40mm (not included) WEIGHT > 19kg MANUFACTURING MATERIALS > Acrylic and Fibreglass GUARANTEE > Baths come with a 5 year guarantee. Marbletrend will replace this product if a fault is shown to be caused by faulty manufacturing or materials, prior to correct installation This guarantee does not include removal and installation costs. INSTALLATION INSTRUCTIONS Check that your floor is level and secure.Your Marbletrend bath does not need to be supported by a mortar bed. To adhere your bath to the floor, simply run a generous bead of silicone along the timber support and allow sufficient time to cure. Timber supports must have full contact with floor to achieve correct support for bath. 1. Place bath into position and ensure that the bath is level. The rim around the bath and the base must be fully supported. If the bath is being checked into an adjoining wall, make sure the wall is rebated to a depth that will allow the tiling bead to be checked in. 2. The front edge and sides of the bath are to be supported by a mini wall that can be constructed out of timber or masonry. Failure to fllow our instalation guide will void the waranty. Carefuly inspect your bath prior to instalation as no claims will be acepted if the product has ben instaled. NB. Specifications are subject to change without prior notice. We recommend that hot water applied to this product does no exceed 55oC

TILE BACKING SHEET

TILE SILICONE SEALANT

50 x 25 BATTEN

TIMER STUD

SILICONE SEALANT

TILE TILE BACKING SHEET BATH

MASONRY OR STUD WALL FLOOR

Select 1800 Inset Bath

206

FEATURES & BENEFITS > No mortar bed required for support > Simple to install > Waste on one end, ideal for showering > Anti-skid surface within a large surface area > Designed to shower over in substitute of the shower base SIZE > 1800mm x 800mm x 500m D internal depth > Rim 90mm CODES BSWHWH Select 1800 Inset Bath COLOUR > White

WASTE > 40mm (not included)

350

1200

500

1800

GUARANTEE > Baths come with a 5 year guarantee > Marbletrend will replace this product if a fault is shown to be caused by faulty manufacturing or materials, prior to correct installation This guarantee does not include removal and installation costs. INSTALLATION INSTRUCTIONS Check that your floor is level and secure.Your Marbletrend bath does not need to be supported by a mortar bed. To adhere your bath to the floor, simply run a generous bead of silicone along the timber support and allow sufficient time to cure. Timber supports must have full contact with floor to achieve correct support for bath. 1. Place bath into position and ensure that the bath is level. The rim around the bath and the base must be fully supported. If the bath is being checked into an adjoining wall, make sure the wall is rebated to a depth that will allow the tiling bead to be checked in. 2. The front edge and sides of the bath are to be supported by a mini wall that can be constructed out of timber or masonry. Failure to fllow our instalation guide will void the waranty. Carefuly inspect your bath prior to instalation as no claims will be acepted if the product has ben instaled. NB. Specifications are subject to change without prior notice. We recommend that hot water applied to this product does no exceed 55oC

150

WEIGHT > 21kg MANUFACTURING MATERIALS > Acrylic and Fibreglass

400

800

VOLUME > 270 litres

1800

800

TILE BACKING SHEET

TILE SILICONE SEALANT

50 x 25 BATTEN

TIMER STUD

SILICONE SEALANT

TILE TILE BACKING SHEET BATH

MASONRY OR STUD WALL FLOOR

207

Traditional High Back Bath - 1500

FEATURES & BENEFITS > Classic design > Brass or chrome feet available > Choice of colour combinations > Lumbar support

440±5 156 mm

102 mm

560±5

CODES HSWHBLB White Int/Black Ex. Brass Feet HSWHBLC White Int/Black Ex. Chrome Feet HSWHBUB White Int/Burgundy Ex. Brass Feet HSWHBUC White Int/Burgundy Ex. Chrome Feet HSWHWHB White Int/White Ext Brass Feet HSWHWHC White Int/White Ex. Chrome Feet HSIVBUB Ivory Int/Burgundy Ext Brass Feet HSIVBUC Ivory Int/Burgundy Ex. Chrome Feet

30±2

SIZE > 1500mm x 730mm x 725mm H > Internal depth 585mm > Rim 90mm

350 mm

250

Ø51

±1

720±5

376 mm

VOLUME > 180 litres

75±2

1480

COLOURS > Internal - White or Ivory > External - White, Ivory, Burgundy and Black

WASTE > 40mm PVC (not included) WEIGHT > 42kg

414 mm

862 mm

174 mm

30±2

440±5

102 mm

560±5

30±2

630 mm

MANUFACTURING MATERIALS > Acrylic, Fibreglass, Gelcoat

414 mm

862 mm

350 mm

250

Ø51

±1

720±5

376 mm

75±2

156 mm

174 mm

Traditional 1680 Bath

208

FEATURES & BENEFITS > Classic design > Brass or chrome feet available > Choice of colour combinations SIZE > 1680mm x 755mm x 575mm H > Internal depth 460mm > Rim 90mm CODES TBWHBLB White Int/Black Ex. Brass Feet TBWHBLC White Int/Black Ex. Chrome Feet TBWHBUB White Int/Burgundy Ex. Brass Feet TBWHBUC White Int/Burgundy Ex. Chrome Feet TBWHIVB White Int/Ivory Ex. Brass Feet TBWHIVC White Int/Ivory Ex. Chrome Feet TBWHWHB White Int/White Ex. Brass Feet TBWHWHC White Int/White Ex. Chrome Feet TBIVBUB Ivory Int/Burgundy Ex. Brass Feet TBIVBUC Ivory Int/Burgundy Ex. Chrome Feet

425±5 595±5

595±5

425±5

51±

1180

WASTE > 40mm (not included)

1680

WEIGHT > 45kg

1180

750±5

1680

1 51±

+5 -10

280

35±2

750±5

425±5

595±5

380

1680

A 90 R1

MANUFACTURING MATERIALS > Acrylic, Fibreglass, Gelcoat

1180

280

+5 -10

35±2

380

COLOURS > Internal - White or Ivory > External - White, Ivory, Burgundy and Black volume > 210 litres

750±5

±1

A 90 280

+5 -10

209

Traditional High Back Bath - 1760

FEATURES & BENEFITS > Classic design > Brass or chrome feet available > Choice of colour combinations SIZE > 1760mm x 750mm x 735mm H > Internal depth 585mm > Rim 90mm CODES HBWHBLB White Int/Black Ext Brass Feet HBWHBLC White Int/Black Ext Chrome Feet HBWHBUB White Int/Burgundy Ext Brass Feet HBWHBUC White Int/Burgundy Ext Chrome Feet HBWHWHB White Int/White Ext Brass Feet HBWHWHC White Int/White Ext Chrome Feet HBIVBUB Ivory Int/Burgundy Ext Brass Feet HBIVBUC Ivory Int/Burgundy Ext Chrome Feet

156 mm

440±5

110 mm

1760

COLOURS > Internal - White or Ivory > External - White, Ivory, Burgundy and Black

812 mm 1760

51.0

WEIGHT > 59kg

1129 mm

409 mm 1760

119 mm

730±5

630 mm

156 mm

440±5

110 mm

51.0

1129 mm

m±

730±5

376 mm

350 mm

250±5

409 mm

30±2

MANUFACTURING MATERIALS > Acrylic, Fibreglass, Gelcoat

m±

730±5

376 mm

WASTE > 40mm PVC (not included)

350 mm

250±5

VOLUME > 200 litres

119 mm

Traditional Double High Back Bath

210

FEATURES & BENEFITS > Classic design > Brass or chrome feet available > Choice of colour combinations > Dual lumber support SIZE > 1805mm x 750mm x 710mm H > Internal depth 440mm > Rim 90mm

VOLUME > 190 litres WASTE > 40mm PVC WEIGHT > 50kg MANUFACTURING MATERIALS > Acrylic, Fibreglass, Gelcoat GUARANTEE > Baths come with a 5 year guarantee > Marbletrend will replace this product if a fault is shown to be caused by faulty manufacturing or materials, prior to correct installation > This guarantee does not include removal and installation costs

145

COLOURS > Internal - White or Ivory > External - White, Ivory, Burgundy, and Black

1805

710 585

CODES HDWHBLB White Int/Black Ext Brass Feet HDWHBLC White Int/Black Ext Chrome Feet HDWHBUB White Int/Burgundy Ext Brass Feet HDWHBUC White Int/Burgundy Ext Chrome Feet HDWHWHB White Int/White Ext Brass Feet HDWHWHC White Int/White Ext Chrome Feet HDIVBUB Ivory Int/Burgundy Ext Brass Feet HDIVBUC Ivory Int/Burgundy Ext Chrome Feet

902.5

211

Clawfoot Installation Instructions

1. Sit bath in position and ensure all 4 feet are touching the ground. Note: Adjustment can be made to feet by undoing the bolt on the underside of foot and adding or removing a washer. If floor is badly out of level use a grinder with a metal disk to grind foot down to required height. 2. In the bottom of each foot there is a fixing hole. Use a pencil to mark the position for fixing through the locating hole. FOR INSTALLATION ON CONCRETE FLOR 1. Use 6mm x 40mm Dyna bolts, bolted through claw feet into concrete. FOR INSTALLATION ON TIMBER FLOR 2. Use 40mm x 10 gauge tex screws with tex heads, screwed through claw feet into timber floor. Please note : make sure bath and waste pipe are in correct position, before fixing down . water temperature from the outlet should not exceed 55oc CLEANING Warm soapy water or mild household cleaners will be sufficient to remove most marks or residue. For persistent stains or to rejuvenate the surface use Marbletrend Ultragloss polish. Do not use cleaning products such as, harsh abrasive cleaners, dry cleaning fluids, glass cleaning sprays, or Ammonia compounds. We advise that you refer to any cleaning product warning labels.

REPAIRS The baths can only be repaired by an outside source, i.e: Mend a Bath. The external portion of the claw foot baths can be replaced with a fibreglass repair kit. The legs are non repairable, however they can be purchased from Marbletrend.

Aruba Bath Screen

212

FEATURES & BENEFITS > Use: Domestic > Modern design > Fix and Swing for easy access for cleaning > Long towel rail handle > Chrome fittings only COLOURS > Available: clear glass SIZE > 1400mm H x 880mm W MANUFACTURING MATERIAL > Glass Toughened 6.38mm > Frame and Fittings chrome plated Aluminium GUARANTEE 12 months, where we will replace this product if a fault is shown to be caused by faulty manufacturing or materials. This guarantee does not include removal and installation costs CODES SSAR2RCHCLP SSAR2LCHCLP

ScrnBath Aruba Fixed/Fold RH Hinge 900x1400 Chrome ScrnBath Aruba Fixed/Fold LH Hinge 900x1400 Chrome

300 mm

450 mm 1400 mm

chrome patch hinge 300 mm

45 mm

slash guard

215 mm

600 mm 880 mm

213

Aruba Bath Screen Installation Instructions

1 Position wall jamb inside the tile bead of bath or if

the bath has no tile bead position wall jamb 15mm in from the edge of the bath. Plumb wall jamb and with a pencil mark the drill position on the wall. 2 Drill a 6mm hole in wall and insert wall plugs supplied 3 With screws and washer provided, fix wall jamb to wall and ensure it remains plumb.

Aruba Bath Screen Installation Instructions 4 At this stage 2 people may be required to complete

following step. Carefully lift assembled screen into position and guide over wall jamb. 5 Check the screen is level and the door swings

correctly, if the wall or bath are not level or plumb, the screen may need to be pushed back into the wall jamb further to ensure the swing panel will miss the tile bead on the bath. Once the position of the screen is achieved fix into position with screws provided, fit handle to door panel. Silicone inside and outside of wall jamb, also outside bottom of fixed panel allow 24 hours for silicone to cure before using screen.

214

215

Hampton Fix ‘n’ Fold Bath Screen

FEATURES & BENEFITS > Fully framed design > Reversible to suit all bath positions > One swinging door for easy access into shower/bath > Moulded splash guard > Easy installation SIZE > 1400 x 800mm CODES SSHA42CHCLP Bath Screen Hampton Swivel Chrome SSHA42WHCLP Bath Screen Hampton Swivel White FRAME COLOUR > Chrome MANUFACTURING MATERIALS > 6.38mm toughened glass and aluminium frame

50 mm

1390 mm

1400 mm

25 mm

GUARANTEE > 5 years guarantee. Marbletrend will replace a screen where the problem is shown to be a fault in manufacturing or materials, prior to installation

745 mm 795 mm

Kakadu Deluxe Bath Screen

216

FEATURES AND BENEFITS > Frameless design > Minimal fittings > 8mm toughened glass > Easy to install > Drip seal > 1600mm H higher than standard > Reversible SIZE > 900 x 1600mm H CODES SSPB42CHCLP

Pure Fixed Bath Screen

HINGE COLOUR > Chrome MANUFACTURING MATERIALS > 8mm toughened glass GUARANTEE > 12 month warranty > Marbletrend will replace this product if a fault is shown to be caused by faulty manufacturing or materials, prior to correct installation > This guarantee does not include removal and installation costs

185 mm

65 mm

1600 mm

75 mm

185 mm

900 mm

217

Kakadu Deluxe Bath Screen

A Using a level ensure fixed panel (7) is plumb then mark

F G

the outside edge with pencil. Check measurements again. Hint:You can use a straight edge if one is available. Install brackets (4) to the fixed panel (7) See B for the assembly details. Do not tighten too much as they need 2 to move when adjusting the panel later. Line the fixed panel (7) up with the marks on the wall. 1b holes in Using a pencil mark the locations for the fixing the wall through the bracket fitted on the panels. Note: Ensure the glass is flush up to the wall and sitting flat on the bath. Remove panel (7) drill holes on the wall lining using a 6mm drill bit. Make sure the correct drill bit is used for the material being drilled out. Insert wall plugs (1) provided. Line fixed panel (7) up with the marked line and fix off the brackets using the Screw flat head screws (6) provided. Note: If wall plugs are not Flat M4x35 appropriate for your application please use other means of securely fixing the brackets to the wall. Using the level ensure the fixed panel (7) is level and vertical before firmly tightening all screws (2 & 6). Clean the brackets (4) before sliding the bracket caps (5) into place. Lock the cap by using the small screw on side of cap. Hint: Position the bracket screws so they are out of sight when viewed from a standing position. Silicone the inside of the screen where the fixed panel joins the wall and the bath. Allow 24 hours for the silicone to dry before using the shower. Cleaners of a gritty or abrasive nature should not be used. Care should be taken to avoid contact with strong chemicals such as slovents and strippers.

Glass

Bracket

2 Counter 1bSunk Cap

H Flat Screw M4x35

2 1b

E F 2 1b Flat Screw M4x35

Flat Screw M4x35

Marriot Bath Screen

218

FEATURES & BENEFITS > Modern curved lines > Left and right hand application available > One swinging door for easy access into shower/bath > Moulded splash guard > Easy installation SIZE > 1400 x 890mm CODES SSFM2LCHCLP SSFM2RCHCLP

Bath Screen Marriot Fix/Fold 1400x900 CH LH Hinge Bath screen Marriot Fix/Fold 1400x900 CH RH Hinge

FRAME COLOUR > Chrome MANUFACTURING MATERIALS > 6.38mm toughened glass and aluminium frame GUARANTEE > 5 years guarantee. Marbletrend will replace a screen where the problem is shown to be a fault in manufacturing or materials, prior to installation 280 mm

1400 mm 140 mm 50 mm chrome patch hinge 280 mm

50 mm

slash guard 220 mm

600 mm 885 mm

219

Marriot Bath Screen Installation Instructions

1 Position wall jamb inside the tile bead of bath or if the

bath has no tile bead position wall jamb 15mm in from the edge of the bath. Plumb wall jamb and with a pencil mark the drill position on the wall. 2 Drill a 6mm hole in wall and insert wall plugs supplied. 3 With screws and washer provided, fix wall jamb to wall and ensure it remains plumb. 4 At this stage 2 people may be required to complete screen into 1. following step. Carefully lift assembled 2. position and guide over wall jamb. Note: Ensure at all times the door panel is supported. 1. Failure to do so could result in door panel falling 1. out of 1.1. wall jamb.

1 1.

Drill a 6mm hole in wall and insert wall plugs supplied.

2. 2.2. With screws and fix wall jamb to wall 2. washer provided, and ensure it remains plumb. 4 At this stage 2 people may be required to complete following step. Carefully lift assembled screen into position and guide over wall jamb.

3 4.

Position wall jamb inside 2 the tile bead of bath or if the bath has no tile bead position wall jamb 15mm in from the edge of the bath. Plumb wall jamb and with a pencil mark the drill position on the wall.

3. 3.

3.3.

4. 4.

4.4.

Marriot Bath Screen Installation Instructions

220 5.

5 Check the screen is level and the door swings correctly,

if the wall or bath are not level or plumb, the screen may need to be pushed back into the wall jamb further to ensure the swing panel will miss the tile bead on the bath. Silicone inside and outside of wall jamb, also outside bottom of fixed panel allow 24 hours for silicone to cure before using screen. 5A From inside of bath screen, drill 3.2mm holes on wall jamb + door jamb. Fix with 16mm screws. IMPORTANT NOTES • Always wear safety glasses. • The silicone used must be compatible with shower base. Please read the warning label on the silicone. • Save this manual for future reference. • Read all instructions before starting the installation. FOR SAFETY, PLEASE OBSERVE THE FOLLOWING: • Before installation please read the instructions to ensure correct installation. • The installation guide packed with the product is an important document. Please keep in good condition and store in a safe place after installation. ATTENTION • I gnoring symbols and /or incorrect use of the shower door may cause personal injury and/or damage the parts. DANGER • Please do not stand on the shower door packaging, otherwise personal injury and/or damage may occur. CAUTION • The installation of the shower door must be done according to the installation manual. Incorrect installation may result in the shower door being unstable, causing physical harm and/or damage. • Before installing the shower door, please check that everything is in order – walls are plumb and base is level. • After opening the box, please place the glass vertically and safely against a wall, placing it horizontally may break the glass, posing a physical hazard. • After opening the box, please separate and lift the parts vertically, horizontal movement can easily break the glass.This is a two-person job. • Please do not knock the shower door or drop hard objects onto it, otherwise breakage may occur.

IMPORTANT NOTES • Always wear safety glasses. • The silicone used must be compatible with shower base. Please read the warning label on the silicone. • Save this manual for future reference. • Read all instructions before starting the installation. For Safety, please observe the following: • Before installation please read the instructions to ensure correct installation. • The installation guide packed with the product is an important document. Please keep in good condition and store in a safe place after installation. Attention • Ignoring symbols and /or incorrect use of the shower door may cause personal injury and/or damage the parts. Danger • Please do not stand on the shower door packaging, otherwise personal injury and/or damage may occur.

Cautio • T t in a • B is • A s p • A v T • P o

221

Tiffany Bath Screen

FEATURES & BENEFITS > Left and right hand application available > One swinging door for easy access into shower/bath > Moulded splash guard > Easy installation > Modern curved lines SIZE > 1400 x 795mm CODES SSFT4LCHCLP SSFT4RCHCLP

Bath Screen Tiffany Sail Left H/H 1400x800 Chrome Bath Screen Tiffany Sail Right H/H 1400x800 Chrome

FRAME COLOUR > Chrome MANUFACTURING MATERIALS > 6.38mm toughened glass and aluminium frame GUARANTE > 5 years guarantee. Marbletrend will replace a screen where the problem is shown to be a fault in manufacturing or materials, prior to installation

1400 mm

65 mm

drip seal 730 mm 795 mm

Pure Bath Screen

222

FEATURES AND BENEFITS > Frameless design > Minimal fittings > 8mm toughened glass > Easy to install > Drip seal > 1600mm H higher than standard > Reversible SIZE > 900 x 1600mm H CODES SSPB42CHCLP

Pure Fixed Bath Screen

185 mm

65 mm

1600 mm

75 mm

185 mm

900 mm

223

Pure Bath Screen Installation Instructions

A Using a level ensure fixed panel (7) is plumb then mark

F G

Glass

Bracket

2 Counter 1bSunk Cap

H Flat Screw M4x35

2 1b

E F 2 1b Flat Screw M4x35

Flat Screw M4x35

Pure Fix’n’Fold Bath Screen

224

FEATURES AND BENEFITS > Frameless design > Minimal fittings > 8mm toughened glass > Easy to install > Drip seals > 1600mm H higher than standard > Left or right hand hinge available SIZE > 900 x 1600mm H HINGE COLOUR > Chrome MANUFACTURING MATERIALS > 8mm toughened glass GUARANTEE > 12 month warranty > Marbletrend will replace this product if a fault is shown to be caused by faulty manufacturing or materials, prior to correct installation > This guarantee does not include removal and installation costs Pure Bath Screen (Fixed And Fold) Left Hand Return Pure Bath Screen (Fixed And Fold) Right Hand Return

185 mm

65 mm

75 mm

1600 mm

CODES SSPB2LCHCLP SSPB2RCHCLP

185 mm 265 mm

625 mm

900 mm

225

Pure Fixâ&#x20AC;&#x2122;nâ&#x20AC;&#x2122;Fold Installation Instructions

A Using a level ensure fixed panel (6) is plumb then mark

.F G

the outside edge with pencil. Check measurements again. Hint:You can use a straight edge if one is available. Install brackets (4) to the fixed panel (6) See B for the assembly details. Do not tighten too much as they need 2 to move when adjusting the panel later. Line the fixed panels (6) up with the marks on the wall. Using a pencil mark the locations for the fixing holes in the wall through the bracket fitted on the 1b panels. Note: Ensure the glass is flush up to the wall and sitting flat on the bath. Remove panel (1) drill holes on the wall lining using a 6mm drill bit. Make sure the correct drill bit is used for the material being drilled out. Insert wall plugs (1) provided. Line fixed panel (6) up with the marked line and fix off the brackets using the flat head screws (11) provided. Note: If wall plugs are not appropriate for your application please use other Flat Screw means of securely fixing the brackets to the wall M4x35 Using the level ensure the fixed panel (6) is level and vertical before firmly tightening all screws (2 & 11). Clean the brackets (4) before sliding the bracket caps (5) into place. Lock the cap by using the small screw on side of cap. Hint: Position the bracket screws so they are out of sight when viewed from a standing position. Fit the hinges (10) to the door panel (8) and fixed front panel (6). See A1 for detail of the hinge assembly. The hinge comes with the counter sunk caps and screws all assembled together. Disassemble the hinge fittings and the hinge itself. The lower hinge point is to be fitted to the fixed front panel (6) and the upper hinge point is to be fitted to the door panel (8).

Glass

Bracket

2 Counter 1b Sunk Cap

H Glass

Hinge

Cap

E F 2 1b Flat Screw M4x35

Cap

Flat Screw M4x35

Pure Fixâ&#x20AC;&#x2122;nâ&#x20AC;&#x2122;Fold Installation Instructions I Using a level ensure hinges on both the fixed front

J K L

panel and on the door panel are level. Ensure the screws are all fixed at the centre of the adjustment point on both the door and the fixed front panel. Note: Both sides of the hinge need to have their fixing screws set to the centre of their adjustment. If this is not done there is a high chance of damaging the glass on both the door and the fixed panel when the door is hung. Gently knock on the plastic seal (13) to the fixed panel (6). Carefully hang the door onto the fixed panel. Using the fixing screws on the hinge to adjust the door so that the door panel (8) lines up with the fixed side panel (6). Hint: There is also adjustment in the bracket if required. Note: Do not over adjust hinge.The gap between the door panel and the fixed panel should be less than 5mm and not more the 15mm. Clean the hinges (10) before sliding the hinge covers into place. Lock the coves by tightening the screws on the edge of the hinge covers. Hint: Position the hinge cover screws so they are out of sight when viewed from a standing position. Silicone the inside of the screen where the fixed panel joins the wall and the bath. Allow 24 hours for the silicone to dry before using the shower. Cleaners of a gritty or abrasive nature should not be used. Care should be taken to avoid contact with strong chemicals such as slovents and strippers.

226

5-15mm

227

Trend Standard Bath Screen

FEATURES & BENEFITS > Reversible to suit all bath positions > One swinging door for easy access into shower/bath > Moulded splash guard > Easy installation SIZE > 800mm x 1600mm H CODES SSBA42CHCLP SSBA42WHCLP

Standard 1600x800 Chrome Standard 1600x800 White

FRAME COLOUR > White and Chrome MANUFACTURING MATERIALS > 6.38mm toughened glass and aluminium frame GUARANTEE > 12 month warranty > Marbletrend will replace this product if a fault is shown to be caused by faulty manufacturing or materials, prior to correct installation. This guarantee does not include removal and installation costs 40 mm

1600 mm

1565 mm

INSTALLATION INSTRUCTIONS 1 Place wall jamb 15mm in from edge of bath or inside edge of tile lip. 2 Drill 6mm hole through wall for plug. Fit wall plug. Fix wall jamb to wall with side fixing holes to the inside. 3 Place door assembly into wall jamb. Plumb edge of door and drill and fix door assembly to wall jamb with screws provided. Place plastic snap caps over screw heads. Fit rubber splash guard. 4 Silicone wall jamb inside and out. Allow 24 hours for silicone to cure before use.

35 mm 640 mm 730 mm 800 mm

Trend Fix and Fold Bath Screen

228

FEATURES & BENEFITS > Reversible to suit all bath positions > Swing panel for easy access into shower/bath > Moulded splash guard > Easy installation > Easy to clean SIZE > Overall: 900mm x 1600mm H > Fixed Panel Sizes: 265mm x 1600mm H > Door Panel Sizes: 630mm x 1600mm H CODES SSBA26CHCLP SSBA26WHCLP

Fix and Fold 900x1600 Chrome Fix and Fold 900x1600 White

WEIGHT > 25kg FRAME COLOUR > White and Chrome MANUFACTURING MATERIALS > 6.38mm toughened glass and aluminium frame GUARANTEE > 12 month warranty > Marbletrend will replace this product if a fault is shown to be caused by faulty manufacturing or materials, prior to correct installation. > This guarantee does not include removal and installation costs

33 mm 50 mm

1570 mm

1600 mm

35 mm

510 mm 593 mm 891 mm

180 mm

229

Trend Fix & Fold Bath Screen Installation Instructions

1 1 x Wall Jamb 2 1 x Fixed Door 3 1 x Bottom Axis Bracket 4 1 x Axis Cap 5 1 x Turnable Door 6 1 x Outer Rubber Bracket 7 1 x Top Axis Bracket 8 1 x Rubber Splash Guard

STEPS 1 - 3 1 Position the wall jamb (1) inside the bath tile lip, or if

the bath does not have a lip, measure in 10mm from edge and 2mm up from the bath. 2 Using a spirit level, ensure wall jamb (1) is plumb. Mark

position of holes and fix to stud or noggins. If stud or noggin is not available use toggle bolts (not supplied). 3 Using a suitable 6mm drill bit, drill holes and fit wall

plugs. Fix wall jamb (1) to wall using screws (35mm) and washers provided. 1&2

Trend Fix & Fold Bath Screen Installation Instructions 4 To ensure correct action of the bath screen, select

appropriate axis bracket (3 or 7) - when fitted, the pin of the axis bracket must be positioned to the inside of the screen, if you prefer the leading door(5) to swing inwards. If you prefer the leading door (5) to swing outwards the pin of the axis bracket must be positioned to the outside of the screen. 4A Apply a small amount of silicone to the slot in the

glass and select the appropriate axis bracket fix to the underside of the fixed panel (2) with screws (16mm) provided. 5 Position fixed panel (2) over wall jamb (1) and fix with

screws provided (8mm). Note: adjustment of the fixed panel may be required once screen is fully assembled. The elongated holes in the wall jamb allow for the screen to be adjusted so the correct operation can be achieved.The Trend Fix ‘n’ Fold Bath Screen may be reversed for either left or right installation by simply interchanging the top and bottom axis brackets.

6 CAUTION – it is advisable at this stage to have a

second person help install the outer door panel. Place axis cap (4) over axis bracket (3). Fit rubber bracket (6) to bottom of door panel with screws (8 mm) provided. Apply a small amount of silicone to the slot in the glass panel. Lift and place door panel (5) over bottom axis bracket (3), line up door panel (5) with fixed panel (2) and install top axis bracket (7) with screws provided (16mm). Note: the rubber brackets are provided to protect your bath from damage during and after installation. Failure to install these brackets will increase the likelihood of your bath being marked or scratched. 7 Apply a bead of silicone to both the inside and outside

of the wall jamb/wall interface, also outside bottom of fixed panel. 8 If required, cut rubber splash guard (8) to size and

install on the bottom of outer door panel. Note: the rubber splash guard has been designed to clear the tile lip of the bath when the screen is used in the bi-fold action. If the bath does not have a tile flange, simply push the splash guard down onto the bath surface to achieve a watertight finish. Doing this will also keep the bath screen in a straight line.

6, 7 & 8

230

231

Trend Bi-Fold Bath Screen

FEATURES & BENEFITS > Reversible to suit all bath positions > Bi folding door for easy access into shower/bath > Easy installation > Moulded splash guard SIZE > Overall: 1000mm x 1600mm H > Swing Panel: 455mm x 1600mm H > Wall panel: 510mm x 1600mm H CODES SSBA40CHCLP SSBA40WHCLP

BiFold 1000x1600 Chrome BiFold 1000x1600 White

WEIGHT > 25kg FRAME COLOUR > White and Chrome MANUFACTURING MATERIALS > 6.38mm toughened glass and aluminium frame GUARANTEE > 12 month warranty > Marbletrend will replace this product if a fault is shown to be caused by faulty manufacturing or materials, prior to correct installation > This guarantee does not include removal and installation costs

40 mm

1565 mm

40 mm

1600 mm

30 mm 35 mm

305 mm

440 mm

420 mm 1000 mm

Trend Bi-Fold Bath Screen Installation Instructions

1 1 x Wall Jamb 2 1 x Inner Door Panel 3 1 x Bottom Axis Bracket 4 1 x Top Axis Cap 5 1 x Outer Door Panel 6 1 x Inner Rubber Bracket 7 1 x Outer Rubber Bracket 8 2 x Rubber Splash Guards

STEPS 1 -3 1 Position the wall jamb (1) inside the bath tile lip, or if

the bath does not have a lip, measure in 10mm from edge of bath. 1 Using a spirit level, ensure wall jamb (1) is plumb. Mark

position of holes and fix to stud or noggins. If stud or noggin is not available use toggle bolts (not supplied). 3 Using a suitable 6mm drill bit, drill holes and fit wall

plugs. Fix wall jamb (1) to wall using screws (35mm) and washers provided 1

232

233

Trend Bi-Fold Bath Screen Installation Instructions

4 Position inner door panel (2) into wall jamb (1). Ensure inner

panel (1) is plumb, drill and fix inner panel (1) to wall jamb with screws provided. 4A Apply a small amount of silicone to the slot in the glass and

select the appropriate axis bracket. (Note: the pin on the axis bracket should be inside of screen) Fix to underside of inner panel (1) with screw provided (16mm). 5 CAUTION â&#x20AC;&#x201C; it is advisable at this stage to have a second

person help install the outer door panel. Apply a small amount of silicone to the slot in the glass. Lift and place the outer door panel (5) over bottom axis pin (3) and line up with inner door panel (2). Install top axis bracket (4) and fix with screws (16mm) provided. Fix outer rubber bracket (7) to the underside of the outer panel using screws (8mm) provided. Note: the rubber brackets are provided to protect your bath from damage during and after installation. Failure to install these brackets will increase the likelihood of your bath being marked or scratched. 6 Apply a bead of silicone to both the inside and outside of the

wall jamb/wall interface. 7 If required, cut rubber splash guard (8) to size and install on

the bottom of both door panels. Note: the rubber splash guard has been designed to clear the tile lip of the bath when the screen is used in the bi-fold action. If the bath does not have a tile flange, simply push the splash guard down onto the bath surface to achieve a watertight finish. Doing this will also keep the bath screen in a straight line. 5