Gas Extinguishing Warning Indicatior C-9318
Technical Specifications • • • • • • • • •
Features and Benefits 1. 2. 3. 4. 5.
Normally installed above the entrance to a gas extinguishing control area. Will eliminate and activate internal sounder prior to gas release. "Gas Extinguishing DO NOT ENTER" is printed on the panel of the indicator. Highlight LED Compatible with GST series of gas extinguishing control panel
Operating voltage: 24Vdc (20Vdc to 28Vdc) polarized Operating Current: Alarm: 100mA Operating temperature: -10°C to +50°C Relative humidity: 95% Indicators: 16 Highlights Red LED, constantly lit when alarm Application: Indoor use Material and colour: ABS, Red Wiring: 1 pair polarized Dimensions: 280m×110mm×46mm
Wiring and Connection Connect the wires to the required terminal according to the diagram. The cable must be fire rated type and the size depends on the distance and application. Minimum size gauge 1.0mm²(18 AWG). See installation and operation for more information.
1 PAIR FIRE CABLE
Selection of compatible Control Panels Compatible with all GST Conventional and Addressable Gas Extinguishing Control System.
GAS EXTINGUISHING CONTROL PANEL
XT2
WARNING INDICATOR A
Gas XT1
DO NOT
WARNING INDICATOR B
G1, R1 (XT1): To DC24V or GND, R terminal of extinguishing control panel, polarized. G2, R2 (XT2): Connecting with gas extinguishing warning indicator in series or with 4.7kΩresistor. Ordering Information: Part No
C-9318
Description
Gas Extinguishing Warning Indicator
Weight /Kg
0.850
XT2
G2 R2
XT1
G1 R1
Gas
DO NOT
G2 R2
C-9318 Gas Extinguishing Warning Indicator is the accessory equipment of a gas extinguishing system. It's usually installed at the entrance of the protected area. After gas is released, the controller will activate the indicator to give visual indication warning people in field to take relative measures. This indicator is non-addressable and is used together with extinguishing control panel.
G1 R1
Description
Pack Qty per Box 1
Note: Specifications are subject to change without notice.