®
GO O D GO O DS
3
A
4 1
2
2 A
B
5 3
B
COMPONENTS 1 2 3 4 5
INITIAL SETUP
THE SMITHS SMART HUB
1. connect to smart hub First, connect the device to your pc in order to sync it with the smart hub installed in your home.
3. one full charge Plug t he s tick i nto its base a nd w ait until one ďŹ rst full c harge before starting to use it.
SAFETY DEVICES ACTIVATED LEV.
3
HOME SAFETY
2. customise settings Depending o n the s afety devices installed in y our h ome, you c an c onnect them to each of the 3 levels ofprotection “ ” provided by the tool.
4. standby Be aware that, whenever you load a setting, it will be activatedthe moment you shut your main door, and will let you back in only with your app’s consent. We recommend you don’t leave home to test it without your smartphone on you .
MODES OF USE
1. change safety level Light sensors inside the key will spot how deep you pressed it in / out of the
LEVEL 1 main door sensors glass break sensor outdoor motion sensor
3. lock level 1 To activate basic safety devices (when eg. living home for work or a night out), partially insert and rotate the key into the keyhole.
LEVEL 0 smoke detector leak detector
2. lock level 0 To deactivate most safety devices, (when eg. you’re home) fully remove the key from the keyhole and place it upside down, next to the base.
LEVEL 2 internal doors sensors indoor motion sensor outdoor camera
4. lock level 2 To activate advanced safety devices (when living home for a longer period of time eg. holidays), fully insert the key into the keyhole.