2016 promo 4 by Matthew Weisman

2/20 - 3/13, 2016

March

Madness

PR 12,16,20

Slam Dunk Deals

Service. Trust. REsults.

MARCHONE MADNESS DEALS PRICE FOR 24 PIECES!

6 PIECE ROLL PIN PUNCH SET

∤∤Centers on the roll pin to protect pin or hole wall

∤∤Includes: 3/32” x 3 1⁄2”, 1/8” x 4”, 5/32” x

41⁄2”, 3/16” x 41⁄2”, 1/4” x 51⁄2” and 1/2” x 6”

$399

SAVE

168

6 PIECE CHISEL AND PUNCH SET

∤∤Set of long cold chisels and tapered drift punches ∤∤Set includes 1/2” x 9”, 5/8” x 12” and 3/4” x 14”

cold chisels and 1/8”, 3/16” and 1/4” drift punches

∤∤Includes sizes: 7/16”, 1/2”, 3/4”, 5/16”, 3/8”

12 PIECE PUNCH AND CHISEL SET

PNCHCHISBUND

∤∤Includes 4 cold chisels, 4 pin

Punch and chisel setS

∤∤Includes sizes: 3/32”, 1/8”,

∤∤ INCLUDES: SPRP6K, SLCDP6KA, SPL12KA

punches and 4 starter punches 5/32”, 3/8”, 1/2”, 5/8”

NEW! 2016 Calendar Merchandise SEE DETAILS - Page 2

2016 Calendar Girls

MERCHANDISE $2895 PDNV411

$3995

BANNER 3’ X 5’

∤∤100% polyester

PDNV405

with grommets

ALEXANDRA ZIPPO

Palm some of these

IMPACT SOCKETS

$234 90 SBUPM106V

3/8” DRIVE 10 PIECE METRIC 6 POINT UNIVERSAL IMPACT SOCKET SET

∤∤Sizes include: 10mm - 19mm

Long Parallel Nose Down Design Reach tight areas that straight or tapered nose sockets can’t for greater versatility.

$148 50 Save $26

SBPXY13V

3/8” DRIVE 13 PIECE SAE AND METRIC HEX BIT SOCKET SET

∤∤SAE: 3/16”, 7/32”, 1/4”, 5/16”, 3/8”, 7/16”, 1/2”; Metric: 4mm-7mm, 10mm, 12mm

SAVE

Opti-Torque System Applies torque to the fastener sides reducing corner round off, protecting fasteners from damage and applying more torque. 150° Chamfer on the socket and drive end for better grab, consistent pressure and easier use. Precision Manufacturing Process High performance alloy steel with advanced heat treating process and precise quality controls provides the ultimate in strength, durability and consistent performance.

$26095 SCPM306V

See your Matco Distributor for more details on products and ways to save.

1/2” DRIVE 30 PIECE METRIC 6 POINT STANDARD AND DEEP IMPACT SOCKET SET

SLAM DUNK ONE PRICE FOR 101 PIECES

SAVE

104

polished

chrome finish

$31550 SABSE100P

101 PIECE SILVER EAGLE GENERAL SERVICE SET

Spread your wings. Includes:

∤∤6 point SAE and metric sockets in

60 tooth

both standard and deep lengths

∤∤Metric and SAE combination wrenches ∤∤Spinner handle and universal joints ∤∤1/4” drive and 3/8” drive

ratchets

ratchets and extensions

Join us on

www.matcotools.com

THINK QUIK!

GET THIS $5010

Value

3/8” DRIVE QUIKBIT DRIVER SETS BUY THIS GET both

with the purchase of BSBTX7A

FOR only

$80

50 BSB7A

BSBTX7A

7 PIECE QUIKBIT SLOTTED AND PHILLIPS SET

7 PIECE QUIKBIT TORX SET

HEAVY-DUTY

$1,04295

CART WITH Full DrawerS Black (MSC4BKFD)

Fire Red (MSC4RFD) BLACK SILVER VEIN (MSC4SVFDA)

Sapphire blue (MSC4BLFD)

SAVE

268

STEALTH BLACK (MSC4SBFD)

TITANIUM (MSC4TFD)

Top lid tray ∤∤34.25”W x 20”D x 5”H ∤∤2 gas pistons that serve as a lid stay as well as raising the cart lid when unlocked

STORAGE SPACE ∤∤6 Drawers: Rows 1 - 3: 34.25”W x 20”D x 3”H Rows 4 - 5: 34.25”W x 20”D x 4”H Row 6: 34.25”W x 20”D x 5”H

BUMPERS ∤∤This deluxe full drawer service cart features four bumpers that help prevent dents and dings

SAFETY

locking and two non-locking

33.75”W x 39.5”H x 20”D

See your Matco Distributor for more details on products and ways to save.

∤∤Four 5” x 2” casters with two

$38 50

∙∙ 72

tooth ratcheting wrench gains access where standard ratcheting wrenches will not fit with a minimal 5° swing arc

AFR6P

∙∙ Non-slip

FINGER RATCHET BIT DRIVER

box end

∤∤Ergonomic profile provides at least 1.5X the torque of competition

∤∤Use with any 1/4” drive bit as a ratcheting screwdriver

$10750

∤∤Pocket-size and full of strength

Save 11%

Get Organized

S7GRCM4

4 PIECE 72 TOOTH METRIC COMBINATION RATCHETING WRENCH SET ∤∤Includes sizes: 21mm, 22mm, 24mm, 25mm

$2695

Save 13%

SAVE

$5350

PRACKBLK

PLIERS/ WRENCH RACK

∤∤Plastic rack holds up to 13 tools ∤∤Two different sizes of slots to

accommodate varying sizes of tools

∤∤Front edge has indentations to hold tools upright

$11

Save 14% WRR12

12 SLOT STANDARD WRENCH RACK

∤∤Fits either SAE or metric wrenches

BFR472T

$4195

Magnetic

3/8” DRIVE MICRO 72 TOOTH RATCHET

∤∤Ideal for working in very tight areas ∤∤Overall length: 4"

MAGWRNCHM

14 PIECE METRIC WRENCH ORGANIZER

∤∤Magnets hold the wrenches

in and attach the organizer to metal surfaces ∤∤Holds 8mm, 9mm, 10mm, 11mm, 12mm, 13mm, 14mm, 15mm, 16mm, 17mm, 18mm, 19mm, 20mm, 21mm

$29950 Save $52

SRFBZXL82TA

$63

8 PIECE ZERO DEGREE FLEX HEAD RATCHET XL WRENCH SET

Save 12%

∤∤Zero degree offset box end and flex ratcheting end on extra long beam

∤∤Loosen or tighten any 6 point, 12 point, SA1P7R

1/4” DRIVE 7 PIECE PHILLIPS SCREWDRIVER BITS SET

spline, TORX, square and even up to 50% rounded off fasteners ∤∤Extra long beam for increased access ∤∤Includes sizes: 5/16”, 3/8”, 7/16”, 1/2”, 9/16”, 5/8”, 11/16”, 3/4”

∤∤1 piece design allows access into the tightest areas

Join us on

www.matcotools.com

GAIN LEVERAGE

$212 95

Save $48

SBUPM62TB

3/8” DRIVE 6 PIECE METRIC 12 POINT UNIVERSAL IMPACT SOCKET SET

over other fixed head pry bars with a durable locking flex head

∤∤Opti-Torque applies torque to fastener sides, not corners ∤∤360° rotation gives easier access from any angle ∤∤Easy-to-read, high-visibility, laser-etched markings ∤∤Includes sizes: 10mm - 15mm

EACH SET

$8750

Indexable to 180°

SAVE

SCSG5B - GREEN SCSO5B - orange

$172

5 PIECE MULTI-PURPOSE SCRAPER SET

Save $42

$74 95

Save $16

IDPBSET2

2 PIECE INDEXING PRY BAR SET

IDP36O

∤∤Blades and shanks are produced from

36” indexable PRY BAR

heat-treated alloy steel for maximum strength and durability and precision ground for sharp parallel edges which can be sharpened ∤∤Blades are precision-ground for sharp parallel edges which can be sharpened ∤∤Includes sizes: (Scraper) 1” x 8”, 1 x 3 3⁄4”, (Angled Scraper) 5/8” x 31⁄2”, 3/4” x 8”, 9/16” x 4”

∤∤Indexing feature provides great flexibility with multiple positions ∤∤Ergonomic Matco handle for comfort and stability

∤∤Includes

SRPB3T

lengths: 8”, 16”

3 PIECE LINE-UP PRY BAR SET

∤∤The perfect set for body work ∤∤Featuring a line up shaft on the opposite end ∤∤Includes length sizes: 14”, 16”, 20”

$11750

Save $30

250 LB. CAPACITY

$23750

Save $41 MT950

AIR POWERED DENT PULLER

∤∤Instantly removes most dents without damaging paint ∤∤Gives you the power and versatility of a 3 lb. slide hammer

without marring the finish by welding or drilling body panels.

See your Matco Distributor for more details on products and ways to save.

∤∤No drilling, welding or sanding required

ALL-STAR PLAYERS BOGO

GET both FOR only

$20350

Includes the most popular 3/8” chrome-plated sockets essential for automotive, aviation and heavy-duty applications

March Madness Slam Dunk Deals

BUY THIS GET THIS SBXYM10R

3/8” DRIVE 10 PIECE METRIC HEX BIT DRIVER SET

with the purchase of SBXYM10R

∤∤Includes sizes: 2mm,

2.5mm, 3mm - 10mm

$16555 Value

SBXY8R

3/8” DRIVE 8 PIECE SAE HEX BIT SOCKET SET

∤∤Includes sizes: 1/8”, 9/64”, 5/32”, 3/16”, 7/32”, 1/4”, 5/16”, 3/8”

Hickory Handles

PUNCH

BOGO $16695 MBHS4

4 PIECE AUTO BODY TOOL SET

∤∤Hickory handles with 2-wedge assembly system ∤∤Set contains: ∤∤Utility Pick Hammer ∤∤Door Skin Hammer ∤∤Curved Cross Chisel Hammer ∤∤General Purpose Pick Hammer

BUY THIS

GET both FOR only 95

$96

GET THIS with the purchase of SPC6PA

$3210 Value

SPC6PA

6 PIECE PUNCH & CHISEL SET

∤∤A basic set of punches and chisels ∤∤Includes sizes: 3/8”, 1/2”, 1/4”, 5/16” Join us on

PCHOB

PUNCH AND CHISEL HOLDER www.matcotools.com

$24595 Save $43

20,000 RPM

MT4883K

.75 HP RIGHT ANGLE DIE GRINDER KIT

$25595 Save $45

MT2868

STRAIGHT LINE SANDER

∤∤Dual piston design provides power to prevent stalling ∤∤Perfect for use in smoothing body filler on large flat surfaces ∤∤Equipped to use PSA style or clip style sanding accessories

∤∤.75 HP motor provides 20,000 RPM and powerful torque ∤∤Larger, easily accessible regulator knob to control power output ∤∤Kit contents include: .75 HP right angle die grinder and various surface prep accessories

∤∤Rear housing exhaust directs air away from work area

BLOW GUNS

∤∤ Tubes to blow particles and liquids for multiple applications within repair, body shops and factories ∤∤ Improved valve for better variable flow control

SPREAD YOUR WINGS $169

$4695

Save 14%

V1252

20” BENT NOZZLE BLOW GUN

Save $28

SE430K

SILVER EAGLE MINI DA SANDER KIT

$4550

Save 14%

∤∤Adjustable speed regulator ∤∤Two finger throttle ∤∤15,000 free speed ∤∤Kit includes: mini DA

V1152

13” BENT NOZZLE BLOW GUN

sander, 2” & 3” hook and loop fastener system pads and 2” and 3” 320 - 600 grit sandpaper

$4195

Save 14%

V1151

$17595

13” FULL FLOW STRAIGHT BLOW GUN

SE730K

SILVER EAGLE MINI POLISHING KIT

∤∤Polisher features rubber molded grip for comfort ∤∤Two finger throttle for easier control and less fatigue ∤∤Adjustable speed regulator to match speed to job ∤∤Kit includes: mini polisher, 3” hook and loop sanding pad, 31⁄2” buffing bonnet, 3” white compounding foam pad and 3” yellow compounding foam pad

$2050

Save 19%

V1051

4” FULL FLOW NOZZLE BLOW GUN

See your Matco Distributor for more details on products and ways to save.

Save $29

SAVE

$34 95

$15995

MET13W

$299

1HP motor

MT3884 1

Save $30

ENGRAVING TOOL

∤∤Engraves on wood, plastic, aluminum, copper, brass, ceramics, stone, iron, glass and other materials ∤∤120 VAC 60 Hz engraving tool ∤∤Tungsten carbide tip

1 HP 4 ⁄2” ANGLE GRINDER

MT1415K

PIN STRIPE REMOVAL KIT

∤∤Powerful, quiet air motor delivers .45 HP with minimal noise and vibration

∤∤Twin bearing spindle design provides steady, precise

∤∤Super high performance, industrial grade 1 HP motor

operation and auxiliary handle for greater control

∤∤Lightweight for ease of use while producing 2,600

for extra torque and extended durability ∤∤Industrial cut gear and constant self-lubricating oil wicking system for extra long life and quiet performance ∤∤Positive stop regulator for more versatile performance on all kinds of jobs

RPM for fast, efficient removal of pin stripes

GET A Small Toolbox

POWER DEAL!

with the purchase of MT2835A

GET both FOR only

$179

35 ft. lbs. maximum torque

BUY THIS

MT2835A

GET THIS

1/4" RATCHET

∤∤Composite housing design for comfort ∤∤Working torque: 5 - 30 ft. lbs. ∤∤Throttle lever with tapered valve provides speed control ∤∤Upgraded internal components provide added durability ∤∤Matco patented (US patent 6,305,246) head

MSBOXBL

Matco Small ToolBox

∤∤Classic Matco small toolbox with chrome trim ∤∤Features four working drawers. Drawer depth is approximately 11⁄4” ∤∤Size: 12” wide by 73⁄4” deep

design with built-in grease fitting

∤∤Built-in regulator to control power

$8995 Value

Join us on

www.matcotools.com

GET THIS with the purchase of SE144

A BOGO THAT KEEPS YOU

DRILLIN’

$199

BUY THIS

$14195 Value MU3S

SILVER EAGLE 3/8" REVERSIBLE KEYLESS AIR DRILL

∤∤Ideal for a broad range of applications:

drilling, honing, hole sawing and reaming ∤∤Triple planetary gearing design gives added torque even at lower speeds ∤∤Muffled handle exhaust allows for more efficient, quiet operation

3 PIECE UNIBIT SET

.45 HP

∤∤Stepped design allows you to drill twenty-eight different hole sizes with just three bits

∤∤Three bits provide a range of hole sizes from 1/8” to

1,800 RPM

PRODUCT SPOTLIGHT

PLUG IN & DIAGNOSE

$3095

3/4”, plus 3/16” to 1/2” holes in material up to 3/8” thick

$8195

Save $14 RTK810

RELAY TEST JUMPER KIT

∤∤Includes four of the most

popular relay test jumpers to make testing relays or live circuits quick and easy on domestic and import vehicles ∤∤No need to pierce wires or connect multiple jumper wires ∤∤Simply remove relay to be tested, insert correct jumper and insert relay into jumper ∤∤Jumpers have tabs for clamping and flat pads to place test leads on

$7650

Save 14%

Save $13

WT600

DEUTSCH TERMINAL TOOL

RTK815

such as Caterpillar, Kenworth, Peterbuilt, Freightliner, Mack and Harley-Davidson motorcycles ∤∤Features three sizes of slotted tubes (14, 16 and 20 gauge) for working on different sizes of Deutsch terminals

∤∤Includes four jumpers to fit many popular relays

∤∤OEM electrical connectors work on trucks and equipment

RELAY TEST JUMPER KIT II

Great addition to the rtk810 kit

on Honda, Nissan, Toyota, newer Ford and GM mini micro relays as well as international trucks

See your Matco Distributor for more details on products and ways to save.

SE144

GET both FOR only 95

DIAGNOSTICs that help you

CHECK YOURSELF

SAVE

$18750

MD319

MATCO ADVANCED MULTIMETER

∤∤Provides readings for volts, amps and ohms

required for automotive electrical system tests as well as diode and continuity tests ∤∤Selectable 4-stroke or 2-stroke DIs for RPM functions ∤∤Selection of 1 to 12 cylinders for dwell and IG-RPM readings ∤∤Fuel injection detector tests both TBI and PFI engines with user-selectable sensitivities

Quick Reference Chart Model

MD319 With Back-Light

5-Sec Fast Measurements, Fully Auto-Ranging

a a a a

a a a

Beep-Jack™ Input Safety Warning DCV and ACV 0.01mV to 1000V DCA and ACA 0.1μA to 10A Capacitance 60.00μF to 2000μF

$86

Save $15

MD251

Large 6,000 Counts LCD Display

$118 95 Save $33

CT60K

COMPRESSION TESTING SET

∤∤Performs compression testing on gasoline engines, motorcycles, marine and small engines

∤∤Kit includes: 25” flex hose with quick coupler, 21⁄2” gauge,

protective outer boot, 12” flex-14mm standard and long reach adapters and 18mm, 10mm and 12mm thread adapters ∤∤Dual scale gauge reads 0-300psi and 0-21 kg/cm2

$38 50

Type-K Temperature Readings (-50°C to 1000°C)

Selectable Cylinders for Dwell and IG-RPM

MD1669

ms-Fuel Injection Detector Function

∤∤Tests standard automotive electrical DC 6-24V circuits ∤∤When black ground clip is clamped to a suitable earth point and contact

Save 14%

CIRCUIT TESTER WITH CLIP, 6-24V

MD251

tip is placed onto testing sample, test bulb will glow if current is present

∤∤Needle point probe for easy back probing and piercing

MATCO BASIC MULTIMETER

∤∤Provides readings for volts, amps and ohms required for automotive electrical system tests as well as diode and continuity tests

∤∤Large 6000 counts LCD display with 5 second fast nominal update rate ∤∤Shorten the time to test with auto-ranging and manual-ranging override

$12650

$38 50 SMOKE30

Save 14%

UNIVERSAL FILLER NECK CONNECTOR

MD1646

EVAP system, eliminating the need for searching for the EVAP service port ∤∤Capless fuel system adapter works with your smoke machine to test EasyFuel™ capless fuel systems found on new Ford and Chrysler vehicle models

∤∤Checks high and low voltages on 6-12V and 24V circuits ∤∤Connect the red lead to a power source and

∤∤Creates an air-tight seal with any vehicle’s

LED CIRCUIT TESTER, 6-12V AND 24V the black lead to a ground source

∤∤Tester will light up red for power and green for ground during testing

Join us on

www.matcotools.com

CONVENIENTLY POWERED & PERSONALIZED

TOOLBOX Ask your Matco Tools Distributor for more details.

EXTERIOR POWER OUTLETS

with 1-110V and 2-USB ports let you charge things like phones, tablets, cordless tools and more!

STRONGER & MORE DURABLE than the competition with our T-shelf construction and 6â&#x20AC;? 900 lb. casters to help support all your tools.

BUILT-IN POWER CHARGER DRAWER

Personalize it the way you like it with 13 colors and 2 trim options available.

Black Silver Vein

Blue Silver Vein

Copperhead

Fire Red

Outlaw Black

Sapphire Blue

gives you the convenience to organize cordless tools and charge up to 5 items simultaneously.

Crinkle Black

Chrome

Talon Orange Thunderstorm Gray

Metallic Burgundy

Pale Horse White

Supercharged Sliver

Matte Black

See your Matco Distributor for more details on products and ways to save.

Sub Lime Green

MAGNETIC TOOL STORAGE Holds sockets, wrenches, pliers and more! Won’t scratch or mar surfaces

$5350 SE91947

SMART EAR LITE

∤∤High-tech solution for finding and pinpointing squeaks,

$34 15

∤∤Turn your smartphone or tablet into a state-

MTS12X6

rattles and noises anywhere within a vehicle of-the-art sound detection device

$2795

Save 14%

ear buds and dual port connector

RED MAGNA-STICK

∤∤Overall dimensions: 107⁄8” x 2 3⁄16” x 3/8”

MAGNA PANEL STORAGE SYSTEM

∤∤Kit includes: sound wand, aluminum probe,

MTS2X10R

∤∤Overall dimensions: 12” W x 6” D x 2” H

$484 95 6095TD

25 PIECE METRIC LARGE TAP & DIE SET

∤∤Complete metric set contains the taps, hex

dies and accessories needed for larger threading applications from 14mm - 24mm ∤∤Contains both 17⁄16” and 113⁄16” hex dies

$38 50

Save 14%

$124 50 MVP6870

FTT40

VACUUM BRAKE BLEEDER

MULTI-CUT CUTTER

∤∤37⁄8” stainless steel blade ∤∤Cuts auto trim, plastic tubing, rubber, belts and hoses

∤∤Blade tray slips into the handle for extra storage

∤∤Compact 1.3-quart (1.2-liter) capacity reservoir ∤∤Comfortable lever-action throttle with lock-on latch ∤∤Automatic shut-off prevents overfill ∤∤Universal bleed screw adapter conforms to most common bleed screw sizes

REMOVE PRESS-FITTED DRIVE PULLEYS $96

SAVE

$16350

SCDPT6

Save 14%

1/2” DRIVE 6 PIECE DEEP THIN WALL IMPACT SOCKET SET

MST4531A

HARMONIC BALANCER PULLER/INSTALLER

∤∤For easy removal of most harmonic balancers and drive pulleys which are press-fitted onto the crankshaft ∤∤Features a bearing-centered, circular 2/3-way flange and an assortment of

metric and fractional bolts and adapters to provide wide coverage

Join us on

∤∤Includes five of the most common wheel

service impact sockets: 13/16”, 7/8”, 17mm, 19mm, 21mm plus a 3” impact extension ∤∤Strong, thin wall construction

www.matcotools.com

$33295 Save $58

$6995

ART903M

Save 12%

TELESCOPING ALUMINUM TRAM GAUGE

TS405

TIRE STEPS

∤∤Telescoping tram measures

∤∤Hangs over front or rear wheel for easy access ∤∤Fits tires up to 141⁄2” wide ∤∤211⁄4” wide

from 28” to 10’ ∤∤Measures in American standard and metric ∤∤Includes two short 5” pointers, two regular 11” pointers and two nylon storage bags

$18 95

Save 13% HTD4

12 PIECE TIP DRILL SET

∤∤Perfect for cleaning carburetor jets, injectors,

torch tips and service of gases and liquid jets anywhere a small diameter drilled hole is needed ∤∤Drill #s 52, 54, 56, 58, 60, 62, 64, 66, 68, 70, 72, 74

RECHARGEABLE SPRING HINGED BRACeLET

230

LUMENS

Detachable magnetic work stand is included

Save 18%

MWL40SMD

40 SMD CORDLESS LIGHT

∤∤360° rotating hooks on each end provide easy rotation ∤∤5-6 hrs. of continuous working time ∤∤Li-Ion rechargeable battery

See your Matco Distributor for more details on products and ways to save.

PDRMNV9

MOPAR WRENCH BRACeLET

∤∤Spring hinged bracelet with MOPAR logo etched, Metal

$7695

$5295

NEW

$1499 PDMC336

CAPTAIN HAT

$2295 PDRMC23

Rat Fink NO FLY ZONE HAT

∤∤Embroidered logo on front, bill and both sides, hook and loop closure

MATCO APPAREL MORE SELECTION, LOWER PRICES.

SALT FLAT TEE

∤∤100% pre-shrunk cotton tee,

DEERSLAYER JACKET

screen print on front, Navy

∤∤100% double brushed cotton

PDMT403 (SIZE) ∙∙ Sizes: m-xl $17.53 ∙∙ Sizes: XXL-XxXl $21.43

duck shell with heavyweight insulation quilted lining ∤∤Embroidered logo on front PDMJKT68 (SIZE) ∙∙ Sizes: m-xl $139.95 ∙∙ Sizes: XXL-XxXl $154.95

RETRO WRENCH HOODIE

∤∤50% cotton/50% polyester ∤∤Screen print on front PDMS58 (SIZE) ∙∙ Sizes: m-xl $59.95 ∙∙ Sizes: XXL-XxXl $64.95

$2495 PDMC268

COLLEGIATE WRAP BEANIE

∤∤One size fits most

$61

TRIGGER ACTIVATED ASSIST KNIFE

SWMP1B ∤∤Handle: aircraft aluminum, blade: 2.9” (7.4cm) black Teflon

PDMC329

CAMO BEANIE CAP TRACK JACKET

∤∤100% polyester, soft, tricot body and sleeves ∤∤Embroidered logo on front

coated stainless steel, closed: 4.3” (10.9cm), weight 4.1 oz.

The sale of certain knives is illegal in some states and it is ultimately the responsibility of the distributor to know and obey the laws of the state and localities where he/she resides and sells tools. Matco does not defend or pay court costs associated with distributors breaking their state and local laws and the fees they incur in the defense of their actions.

$2895

Join us on

PDMJKT21 (SIZE) ∙∙ Sizes: m-xl $79.95 ∙∙ Sizes: XXL-XxXl $84.95

www.matcotools.com

CORDLESS

STEP AWAY FROM THE OUTLET GET both FOR only

$190

BUY THIS

GET THIS with the purchase of ALCOB10

SINGLE PORTABLE STAND

SPSTAND ∤∤Handle size 7.8” x 11.4” ∤∤Base size 10.6” x 9.3”

ALCOB10

10W COB ALUMINUM CORDLESS LIGHT

Li-Ion rechargeable battery

∤∤Heavy-duty, die casting aluminum housing ∤∤Quick fastening for easier light head adjustment ∤∤160° horizontal rotation on base joint ∤∤IP65 dust and water resistant ∤∤2~2.5 hours continuous working time

$2645 Value

FRONT END SERVICE SET MST6295A

$18295 Save $32

PR0416RED

The products on Matco’s National Promo are limited in quantity and subject to availability. Prices in Puerto Rico, Alaska and Hawaii may vary due to additional shipping charges. Matco reserves the right to correct printing errors.

Comprehensive set for removal of most pitman arms, tie rod ends and ball joints found on automotive and light truck applications Two pitman arm pullers for large or small ball joint applications Join us on social media for Fan exclusive deals!