promo 1

1/4/20–1/26/20

#1 PR 12, 16, 20

Sizes include: 4mm–15mm, 3/16"–9/16".

OPTIMUM TORQUE WITH LESS ROUNDING. $219 95

Save $40 SAP486V

1/4" DRIVE ADV 48 PIECE METRIC & SAE 6 POINT STANDARD AND DEEP IMPACT SOCKET SET ∙∙ Opti-Torque system applies torque to the fastener sides, reducing corner round off ∙∙ 150° chamfer on the socket drive end for better grab, constant pressure and easier use ∙∙ Parallel nose down design allows for use in tight areas

piece construction half-cut STUBBY AND STRONG! One which makes them 30% stronger.

1/4" DRIVE STUBBY DRIVERS ∙∙S2 steel finished in Gun Metal Gray ∙∙Impact rated for use with hand or power tools

Stubby low profile (3/4") half-cut drivers are perfect for work in tight places!

Cases are color coded for easy identification.

2. SAIP10A 10 PIECE TOR X® PLUS

3. SAS10 10 PIECE SAE HEX 1. SAT10 10 PIECE TORX® SET

4. SA X8 8 PIECE TRIPLE SQUARE

SAT10

1. 10 PIECE TORX® Set Includes: TORX® T8, T10, T15, T20, T25, T27, T30, T40, T45, T50.

$54 95 SAX8

4. 8 PIECE TRIPLE SQUARE Set includes: 4mm, 5mm, 6mm, 7mm, 8mm, 9mm, 10mm, 12mm.

2

$70 50

$58 50

SAIP10A

SAS10

2. 10 PIECE TORX® PLUS 3. 10 PIECE SAE HEX Set Includes: TORX Plus IP08, IP10, IP15, IP20, IP25, IP27, IP30, IP40, IP45, IP50.

Set Includes: SAE hex 5/64", 3/32", 7/64", 1/8", 5/32", 3/16", 7/32", 1/4", 5/16", 3/8".

$53 50

$58 50

®

SAPF8

5. 8 PIECE FLAT & PHILLIPS Set Includes: Phillips P1, P2, P3, P4, Flat Tip 3/16, 1/4, 5/16, 3/8.

5. SAPF8 8 PIECE FL AT & PHILLIPS

SAM10

6. 10 PIECE METRIC Set Includes: hex 2mm, 2.5mm, 3mm, 4mm, 5mm, 6mm, 7mm, 8mm, 9mm, 10mm.

6. SAM10 10 PIECE METRIC

pr

$62 50

EX TENDS FR

OM 52 "–78.5

"

1,600

$288 50

LUMENS

MWLUHFL

RECHARGEABLE CORDLESS UNDERHOOD FLOODLIGHT ∙∙ Quick release mechanism to remove floodlight ∙∙ Magnetic base on floodlight for additional mounting capabilities ∙∙ Rugged and durable IP67 rating; water and dust resistant

1,600 LUMENS

Compact size and a strong magnetic base is ideal for lighting on the go.

$195 50

Save $34 MWLFLG

GREEN RECHARGEABLE FLOOD LIGHT ∙∙ Comes with a 25' charging cord so the light can be charged while in use or run off of DC power ∙∙ Rugged and durable IP67 rating; water and dust resistant

Color changing display and audible alarm to indicate progress when reaching target value.

Below 80%

Above 80%

Manufactured with a manganic phosphate finish.

100% or above

$255 50

Save $44 BTA115

3/8" DRIVE TORQUE AND ANGLE METER

pr

∙∙ Turns any ratchet or breaker bar into a torque/angle measuring tool ∙∙ Can be used to recalibrate any type of torque wrench ∙∙ 30 memory settings for torque reading and 30 for angle reading ∙∙ Peak and track mode for torque reading and ratchet mode for angle reading ∙∙ 180° view flip screen ∙∙ Clockwise and counter clockwise operation ∙∙ Torque range: 6-115 ft. lbs. (8- 60 N.m) / Angle range: 1 ~ 270° ∙∙ Units of measure: N.m, Kg.cm, lb. ft., lb. in. ∙∙ Torque accuracy: CW ±1.5% / CCW ±2.5% / Angle accuracy: ±2%

$59 50

Set includes: 1/4" Drive Star T10, T15, T20, T25, T27, T30, T40, T45, T47, T50.

Save $10 SA1TX10V

1/4" 10 PIECE DRIVE STUBBY X TORX® DRIVER SET ∙∙ Socket mirror polish chrome-vanadium finish that resists abrasion and corrosion ∙∙ Packaged on a black nylon rail

3

LOSE THE HOSE...FIND YOUR FREEDOM! Compact, take anywhere design allows you to have freedom when moving through the shop.

88 gear teeth produce a swing arc just over 4°, allowing faster work in the most compact spaces.

Includes 1/4" ratchet, 12V 2.0Ah battery, charger and carrying case.

FT. LBS.

30

MCL1214RAK BURGUNDY

TORQUE

320

RPM

12V

Unique 9 position locking flex head ensures that the ratchet head maintains the desired position regardless of size or applied load.

$299 50

Slim profile allows better access in tight areas.

Save $40

12V CORDLESS INFINIUM™ 1/4" DRIVE RATCHET KITS MCL1214RAKO ORANGE

∙∙ Small head design (1" wide) for superior access in tight areas ∙∙ Variable speed comfort trigger gives user precise feel ∙∙ Trigger activated LED light helps illuminate work area in poorly lit environments ∙∙ Patented Matco ratchet head with grease fitting

Recessed shift lever to prevent accidental shifting to improve job efficiency.

MCL1214RAKG GREEN

$139 95

Save $19 BFR128LF

4

pr

3/8" DRIVE 12" EIGHTY8 TOOTH LOCKING FLEX CHROME RATCHET

Includes sizes: 8mm–19mm.

TOOTH Reversing lever with 12° offset provides on the fly ratcheting adjustability with knuckle clearance.

$238 50 S7GRRCM12

12 PIECE 72 TOOTH METRIC REVERSIBLE COMBINATION RATCHETING WRENCH SET ∙∙ 72 tooth ratcheting wrench gains access where standard ratcheting wrenches will not fit with a minimal 5° swing arc ∙∙ Non-slip box end

TOOTH

Loosen or tighten any

6-point 50% rounded off

Square

Spline

TORX®

12-point

$450 50

Save $79 SRFBZXLM42TA

4 PIECE 0° FLEX RATCHETING EXTRA LONG WRENCH SET

Super thin for limited access work spaces.

Get better leverage with extra long, slim handle.

72 teeth deliver an industry-best 5° swing arc to get in the tightest areas where others can't.

6mm–19mm

∙∙ Get the job done easier with non-slip ratcheting box end that applies more power and reduces fastener rounding ∙∙ Better access to align with fasteners at nearly any angle with the flex head that rotates 180° ∙∙ 0° offset box end and flex ratcheting end on extra long beam

$138 50

Save $15 TW8047M

pr

Includes sizes: 21mm, 22mm, 24mm, 25mm.

7 PIECE FLAT METRIC WRENCH SET Made of hardened alloy chrome vanadium steel with satin chrome finish.

5

BODY REPAIR MADE EASY. Patented integrated chuck design for quick bit installation and seamless design.

Use tapered end to remove and flanged end to install.

Soft rubber overmold handle provides comfortable grip and protects user from the transfer of cold air through the tool handle.

Precision machined piston and barrel provide consistent tool performance even in extremely cold temperatures.

$319 95

Save $56

BURGUNDY SHORT BARREL AIR HAMMER

NEW

20,000

RPM

HP

.75

Save $9 TAP290

TRUCK ANCHOR PIN BUSHING DRIVE ∙∙ Pneumatic bushing driver set removes and installs truck and trailer 13⁄8" anchor pin bushings and stuck anchor pins ∙∙ Includes an 111⁄2" long driver that allows bushings to be driven straight without removing the hub assembly ∙∙ Double-sided cone snaps onto driver to drive out and install bushings

MT2912

∙∙ Patent pending valve body allows for more air to be moved through the tool, producing a more powerful blow ∙∙ Rubber dampener provides end user with reduced vibration, shock and hand fatigue ∙∙ Front exhaust system directs air away from end user

$84 95

Sleek, durable design to better fit in close quarters — only 6" long and can fit into a 2" space!

$54 50

Save $9 MAT1

$224 50

MT4883K

SAVE

29%

.75 HP 90° RIGHT ANGLE DIE GRINDER KIT ∙∙ High performance, efficient motor provides 20,000 RPM with powerful torque ∙∙ Larger, easily accessible regulator knob to control power output ∙∙ Comfortable safety lever throttle prevents accidental start ups ∙∙ Rear housing exhaust directs air away from work area ∙∙ Textured composite housing for comfortable feel

6

90° MINI ANGLE DRIVER ∙∙ Includes a power shank locking mechanism plus a magnetic bit holder ∙∙ Removable handle includes left and right positions ∙∙ Bit storage inside handle ∙∙ Not suitable for impact tools ∙∙ Connect to the standard hex screwdriver or drill

See your Matco Distributor for more details on products and ways to save.

pr

Kit includes: .75 HP right angle die grinder and various surface prep accessories.

Takes the place of a right angle die grinder with a profile up to 1.5" shorter.

Provides the strength to disassemble even the toughest U-joints in minutes on virtually all Class 7 and 8 trucks and machinery.

SAVE

$85 12.5" x 9.0" x 4.0"

LIMITED QUANTITIES ADJUSTABLE FROM

RPM

7,000–19,000

$129 95 MT2422

∙∙ Uses 1/4"-20 male spindle to thread into most roll lock holders ∙∙ Inline driven 0.4 HP motor outperforms even 0.5 HP right angle gear transferred grinders ∙∙ Apply pressure where it's needed: directly over discs instead of from a right angle handle ∙∙ Includes 2" and 3" roll lock holders

PSI

FT. LBS.

$190

HEAVY DUTY U-JOINT PULLER ∙∙ For use with up to 1" impact tool or air tool ∙∙ Will not damage the driveshaft, bearings, yokes or bearing cups

225

500 50

Save $41 MST5190B

MICRO SURFACE PREP TOOL

MAXIMUM TORQUE

$238 50

WORKING PRESSURE

LIMITED QUANTITIES

Save $102 MT1712-2

1/2" IMPACT WRENCH WITH 2" EXTENDED ANVIL ∙∙ 2" extended anvil makes this tool perfect for tire work ∙∙ Durable twin hammer mechanism ∙∙ Adjustable power regulation allows technician to control power in forward direction ∙∙ Handle exhaust design prevents air from blowing in user's work area

$46 95

Save $8

12"

$127

50

Save $22

3/8" X 50' AIR HOSE ∙∙ Made from an engineered hybrid polymer that provides superior, all-weather flexibility, even in freezing temperatures (temperature range -40°F to 150°F) ∙∙ Features a lightweight body, brass 1/4" MNPT fitting and a reinforced bend restrictor

SAVE

6" 3"

SBXWKL3

3 PIECE 3/8" DRIVE LOCKING WOBBLE EXTENSION SET ∙∙ Wobble extension is used when a user can't get the angle on a nut or bolt ∙∙ Extensions wobble at the point of contact with the socket, giving just enough flex for the socket to get a firm grip ∙∙ Clearly marked for ease of identification during general use

pr

MTH3850

$19

50

$10

BG842

MANUAL BRAKE LINING GAUGE Designed to give an accurate measurement of how much brake lining is left.

7

M

A

TOOL STORAGE

IN THE U DE S A

AVAILABLE IN 13 PAINT COLORS AND 6 TRIM COLORS.

ASK

YOUR MATCO DISTRIBUTOR FOR MORE INFORMATION!

CONVENIENT Front power with one 110V outlet and two USB ports to charge items such as laptops, cell phones and cordless tools.

STRENGTH AND SUPPORT 1,500 lbs. spring casters with chrome hubcaps.

BUILT TOUGH

FULLY CHARGED

T-construction — center shelf is fully welded to all sides to provide maximum strength.

Integrated power charging drawer — a great place to store cordless tools, chargers and batteries with five 110V power outlets and two USB ports.

PROTECT YOUR INVESTMENT. TOOLBOX COVERS

Four corner zippers allow you to fully open front, sides and top of tool box to get full access to drawers and worksurface.

Integrated velcro means your cover remains on your toolbox and is always in place.

DESCRIPTION 2 BAY 28"

MODEL PRICE 228TB-COVR $90.95 Save $15

FITS TOOLBOXES R228TB/X228TB/5228RP/6228RP

2 BAY 31"

231TB-COVR $90.95 Save $15

6231RP

3 BAY 28"

328TB-COVR $107.95 Save $18 R328TB/X328TB/5328RP/62F28RP/6328RP

3 BAY 31"

331TB-COVR $107.95 Save $18 6331RP pr

8

Zippers on front sides allow easy access to drawers during the day. Zip down to close up when done.

$76 50 Save $13

Faster than other conventional pulley pullers.

PP390

PULLEY PULLER/INSTALLER ∙∙ Removes and installs pressed-on power steering, alternator and air pump pulleys without slipping ∙∙ Fits most domestic models including GM 3.1 and Quad 4 engines ∙∙ Works on traditional V-shaped pulleys and serpentine belt system pulleys

$113 50

Save $19 MST25WR

REVERSIBLE SAFETY WIRE TWISTER PLIERS ∙∙ Reversible action for left and right twists ∙∙ Cushion throat to prevent foreign object contamination ∙∙ 6" automatic return

SAVE

29% $25 95

Always wear gloves for protection.

In confined areas this tool can access pulleys and sprockets that are not accessible to the technician.

MC93150

OPEN BARREL CRIMPING TOOL

pr

∙∙ Five stations to crimp insulated and non-insulated open barrel terminals and Weather Pack terminals from 14–24 AWG ∙∙ Compact head for one-hand operation under dashboards and other tight areas

$22 95 Save $5

MST9417A

BELT INSTALLATION ASSISTANT ∙∙ Time saving tool gives control and reach when installing serpentine belts, V-belts and timing belts ∙∙ Three pin design gives the technician convenient belt push/pull capability, and the handle gives twisting control for belt installation in difficult areas

Join us on :

w w w.matcotools.com

9

HAMMER IT HOME. Ball-peen heads are polished and lacquer coated for rust resistance.

Shot filled head reduces rebound effect.

16

Redesigned hammer head with no threaded components.

oz.

$94 50

High carbon content, precision forged heads.

Save $16 BH40DB — GREEN

24

oz.

4X

1 PIECE

STRONGER THAN WOOD HANDLES

32

oz.

40

molded polyurethane construction.

Pultruded fiberglass handles are moisture and chemical resistant and four times stronger than wood handles.

$94 50

Save $16 BH40DBOR — ORANGE Large, steel reinforced handle provides for added strength and safety.

$89 50

Save $15 BH32DB — GREEN

$138 95

48

oz.

OZ .

Save $21

32

BPHS4HD

4 PIECE BALL-PEEN HAMMER SET

DEAD BLOW BALL-PEEN HAMMERS

$89 50

Save $15

OZ .

BH32DBOR — ORANGE

$73 95

Save $13 SDSR4

Includes flat window crank retainer tool, curved panel tool, square notch and V-notch fasteners tools.

4 PIECE DOOR SERVICE SET

10

pr

∙∙ Thinner profile with tapered leading edge for difficult panel gaps and flush mounted fasteners ∙∙ Made from long lasting steel for slimmer profile and increased durability ∙∙ Matco comfort handles

Tests batteries on or off the car in just 10 seconds!

Heavy-duty, copper-plated clamps.

Chrome-plated, ventilated steel case.

Removes rust, carbon and other debris from seats and cups without damage.

17-PIECE KITS

Extra-large display with zero adjust.

ÂÂHelix brushes ÂÂTwo-stage brushes

ÂÂBore brushes ÂÂSwab-Eez ®

$90 50 MD4370

130 AMP HEAVY-DUTY BATTERY LOAD TESTER ∙∙ Ceramic insulators, works on both 6V and 12V batteries ∙∙ Determines state-of-charge, cranking and charging volts, along with good/bad status ∙∙ Load safety switch prevents arcing

$184 50

Convenient, portable size and easy-to-read scales.

PM8090B BRASS

$36 50

Save $8

MD2516

5' TWIN MULTIMETER LEAD SET ∙∙ Includes: (1) black test lead, (1) red test lead, (2) multimeter probes, (2) banana plugs and (4) alligator clips ∙∙ Banana plugs are 4mm

$155 95 PM8090S STAINLESS STEEL

SAVE

$40 $163 50 MT6

INFRARED THERMOMETER

pr

∙∙ Temperature range: -20ºF to 932ºF ∙∙ Features a 10:1 distance to spot ratio

17 PIECE DIESEL INJECTOR SEAT CLEANING KITS ∙∙ Brushes are specially engineered to fit injector seats ∙∙ Driver handle features a spring-loaded, quick-lock coupler ∙∙ 1/4" drive hex shaft allows for quick interchange of brushes, drivers, extensions and the use of LOW SPEED drills ∙∙ 3", 4" and 6" brushes ∙∙ Intended for hand use (Do NOT exceed 600 RPM — clockwise rotation only)

Join us on :

w w w.matcotools.com

11

PUT THESE TO THE TEST. CIRCUIT TESTERS

SPARK TESTERS

Tests standard automotive electrical DC 6–24V circuits.

$2795

SAVE

24%

MD1668

12" coiled cord

CIRCUIT TESTER, 6–24V ∙∙ When black ground clip is clamped to a suitable earth point and contact tip is placed onto testing sample, test bulb will glow if current is present ∙∙ Heavy-duty, stainless steel probe with insulated shaft and heavy-duty clip with positive soldered connection

Checks high and low voltages on 6–12V and 24V circuits.

SAVE

24%

12" coiled cord

$36 95 MD1646

LED CIRCUIT TESTER, 6–12V AND 24V

$12 50 SPT79

SPARK TESTER ∙∙ Tests spark plugs, spark plug wires and coils without puncturing the wire ∙∙ Neon lamp indicates relative strength of ignition voltage

∙∙ Tester will light up red for power and green for ground during testing ∙∙ Heavy-duty, stainless steel probe with insulated shaft

SAVE

24% Tests standard automotive electrical DC 12–42V circuits.

24%

12" coiled cord

12

$39 50 MD1651

HYBRID CIRCUIT TESTER, 12-42V ∙∙ Safe for low current circuits and hybrid vehicles ∙∙ Automatic voltage identification featuring blue for under 40V and red for over 40V

$1750 ST20610

IN-LINE SPARK TESTER ∙∙ Connect the tool between the spark plug and the plug wire to provide a quick visual check and diagnosis of the ignition system, including distributorless ignitions ∙∙ Plug wire is double-ended with a straight boot and a 90° boot for confined areas ∙∙ With the engine running, bulb mirrors the ignition spark

See your Matco Distributor for more details on products and ways to save.

pr

SAVE

Cleans carbon from intake valves, fuel passages and cylinders with a professional carbon cleaning solution.

SAVE

24%

$336 95

Save $59 FIT470B

FUEL INJECTOR CANISTER CLEANER ∙∙ Will restore the original spray pattern more effectively, giving improved performance, fuel economy and emission tests ∙∙ Uses shop air with any professional canister cleaning solution on the market ∙∙ Consists of stainless steel braided Teflon hose which resists solvents ∙∙ No adapters included

20 oz. bottle capacity.

HEAVY-DUTY 21⁄2" gauge has a dual scale dial 0-1,000psi and 0-70 kg/cm2.

$18795 FIT469

FUEL INJECTION PRESSURE TESTER ∙∙ Tests standard or small size Schrader valves ∙∙ 31⁄2" gauge features a dual scale dial with ranges from 0–100 psi and 0–7 kg/cm2 ∙∙ Quick coupler connection at end of gauge hose Wire reinforced hydraulic hose is 16 1⁄2" long.

$88 95

21⁄2" gauge has a dual scale dial with ranges from 0–100psi and 0–7 kg/cm2.

Save $15 CT15A

DIESEL COMPRESSION TESTER ∙∙ Performs compression diagnosis on diesel engines ∙∙ Tests cylinder pressure on diesel cars and trucks ∙∙ Features a deflator for releasing air and automatic resetting of gauge for repeat testing

SAVE

$195 95

$48

DFST10

DURAMAX FUEL SYSTEM TESTER

pr

∙∙ Test diesel fuel pressure and vacuum on GM 6.6 liter Duramax engines ∙∙ Includes 6' hose and quick coupler

$75 50

Save $12 FIT13APB

FUEL INJECTION TESTER ∙∙ Includes large and small Schrader adapters, M6-1.00 O-ring adapter and tee manifold ∙∙ Includes everything necessary to test the following systems: American Motors; Bosch AFC, MPC European and Japanese (except CIS — use FIT447); Chrysler Corporation; Ford Motor Company; GM (except TBI — use FIT446) ∙∙ Includes everything necessary to test other systems using Bendix-type fuel injection or a Schrader-type valve, including the small Schrader valve found on TBI and multi-port fuel injection systems on Ford products ∙∙ 21⁄2" gauge has a dual scale dial with ranges from 0–100psi and 0–7 kg/cm2 ∙∙ Packaged in a blow molded case

Join us on :

w w w.matcotools.com

13

PDNFL5 (SIZE)

LADIES NORTH FACE® POLY FLEECE JACKET ∙∙ 95% polyester/ 5% elastane luxe ∙∙ Embroidery on front ∙∙ Navy Heather

ED9102-J855

HOLBROOK WOODGRAIN WITH PRIZM™ DEEP WATER POLARIZED

SIZES: S-XXL $179.95 SIZES: XXL $189.95

∙∙ The iconic American frame design is accented by metal rivets and Oakley icons ∙∙ HDO ® precision gives less distorted vision across the entire field of view offering a truer visual image ∙∙ Lenses block 100% of UVA, UVB & UVC rays and harmful blue light up to 400nm

HDO ® for less distorted view No-slip Unobtainium ® nosepieces Maximum clarity XYZ Optics ®

ED9188-B259

FLAK 2.0 XL STEEL WITH PRIZM™ DARK GOLF ∙∙ Flak 2.0 offers a standard size frame with enhanced lens coverage ∙∙ Lenses block 100% of UVA, UVB & UVC rays and harmful blue light up to 400nm

Lightweight O Matter™ frame No-slip Unobtainium ® nosepieces UV protecting Plutonite ® lenses Three-Point Fit for comfort Maximum clarity XYZ Optics ®

PDLS54 (SIZE)

COSMIC 1/4 ZIP JACKET ∙∙ 100% spun polyester fleck fleece ∙∙ Screen print on front ∙∙ Emerald/Neon Yellow SIZES: S-XL $71.95 | SIZES: XXL $80.95

ED4129-1558

LADIES SPLIT TIME MATTE SEPIA WITH PRIZM™ ROSE GOLD Designed to fit seamlessly while wearing a hat.

LADIES

$15 95 PDMC444

HOT PINK TASSEL BEANIE One size fits most.

$104 95 MTCKIDTENT

KIDS POP-UP TOOL TRUCK PLAY TENT

14

100% polyester with grommets. pr

∙∙ Lightweight and easy for traveling so kids can take it along anywhere ∙∙ Waterproof 190T poly material ∙∙ 63" x 24 3⁄4" x 271⁄2" ∙∙ Carrying case included

WARM ON YOUR FORM! PDNF6 (SIZE)

NORTH FACE® POLY FLEECE JACKET ∙∙ 100% polyester fleece ∙∙ Embroidered logo on left chest ∙∙ Medium Gray Heather SIZES: M-XL $179.95 SIZES: XXL-XXXL $189.95

PDMJKT89 (SIZE)

FLEX 180 HOODED JACKET ∙∙ 100% washed cotton duck with stretch sherpa ∙∙ Embroidered logo on left chest ∙∙ Black SIZES: M-XL $133.95 SIZES: XXL-XXXL $145.95

PDMT520 (SIZE)

LONG SLEEVE RED DIGI CAMO

$16 40 PDMC394

VINTAGE COASTAL HAT Snap-back closure.

PDMS120 (SIZE)

SLATE PRINTED HOODIE

∙∙ 100% polyester ∙∙ Screen print on front ∙∙ Red Digital Camo

∙∙ 80% cotton/ 20% polyester ∙∙ Screen print on front ∙∙ Slate

SIZES: M-XL $47.95 SIZES: XXL-XXXL $52.95

SIZES: M-XL $93.95 SIZES: XXL-XXXL $102.95

MENS LIMITED QUANTITIES

$56 95 MTCKEYHOLDER

MATCO FREIGHTLINER KEY HOLDER

pr

$21 90

PDNV504

5' X 3' WRENCH FLAG BANNER

∙∙ Key holder is 24" X 9" and made from stamped aluminum ∙∙ Holds 25 sets of keys, and each position is numbered for easy shop tracking ∙∙ Mounting hardware included

15

THE TYPHOON® WILL

Using 34 CFM at 125 PSI for 2.1 lbs. of thrust, the Typhoon® is ideal for heavy-duty clean-up and blow-off.

Lightweight and ergonomic (2.125" L; 5.75" W; 10.5" H).

Variable flow with 1/4" NPT high flow tip.

Variable flow trigger for controlled blow-off.

$3795

ZJA680CS

TYPHOON® HIGH VOLUME BLOW GUN ∙∙ Meets or exceeds OSHA standards ∙∙ Maximum flow for easy clean-up and blowoff of even the heaviest shavings and chips

$188 95

SAVE

49%

SPL17KA

17 PIECE PUNCH AND CHISEL SET ∙∙ Non-brass punches are manufactured using S2 tool steel ∙∙ Contoured crowns ensure the proper balance of strength, hardness and durability ∙∙ Includes center punches, pin punches, starter punches, chisels and a brass drift punch

Includes sizes: 3/32", 1/8", 5/32", 3/16", 1/4", 5/16", 3/8", 1/2", 5/8", 7".

PR0120RED

The products on Matco’s National Promo are limited in quantity and subject to availability. Prices in Puerto Rico, Alaska and Hawaii may vary due to additional shipping charges. Matco reserves the right to correct printing errors.

Join us on social media for FAN EXCLUSIVE DEALS! w w w.ma tc otool s .c om