Komo Model VR510 Fusion 5 Axis CNC Router, 5'x10' Table, 20HP ATC Spindle, 25HP Vacuum, Fanuc Control, New in 2008 The CNC Router Store is the source for used 5 axis CNC Routers. Below you will find our current inventory of used 5 axis CNC Router. We
carry
used
5
Axis
CNC
Routers
from
manufacturers such as Thermwood, Motionmaster, DMS, Quintax, CMS, Diversified Machine Systems, C.R. Onsrud and others. There are two basic types of 5 axis cnc routers. The standard duty models from Thermwood, DMS and Motionmaster are designed for trimming of Thermoformed Parts as well as basic pattern and mold making in lighter materials such as foam and ren board. The heavier duty models are designed for pattern and mold making in heavier materials such as aluminum and wood. These models are made by DMS and Thermwood as well as Quintax, C.R. Onsrud, CMS and more.
Used Komo Fusion 5 Axis CNC Router New in 2008 5'x10' Table 20HP Spindle with 15 Station ATC 36' Z Axis Travel Equiped with: FANUC 31Oi-B5 five-axis Fusion Control with integrated PC front end and (2) USB ports Stationary gantry design with linear guideways 5' x 10' x 2' Thick cast aluminum traveling table with threaded inserts, 1 vacuum zone & 4 pin part location Z-axis supported by a pneumatic counterbalance system 20 HP KSK 63F electro-spindle powered by a AC Frequency Inverter 25 H.P. QUINCY vacuum pump, 480 volt, low DB 25 H.P. vacuum pump kit Chiller assembly Automatic lubrication system Machine is wired for 3/60/480 volt operation.