Furniture Tenders Sep 2012 by Maven

FURNITURE TENDERS SEP 2012

www.mavenpk.com

Dated:- 29th August. 2012.

STATE LIFE Insurance Corporation of Pakistan, 2nd Floor Sattar Complex Stadium Road, Sahiwal Zone.

TENDER NOTICE STEEL IRON RACKS & ALMIRAH # P&GS/07/2012 SAHIWAL. Sealed financial bids are invited from pre-qualified GST/NTN registered firms having own office phone/Fax number ( if found contrary the tender will be rejected) preferable based at Sahiwal for the following items on given terms and conditions. S.No. DISCRIPTIONS

QUANTITY

Steel Iron Racks 8’x 4’ x 15” deep 7 shelves 20 guage finish with grey paint Angle Iron Frame

10 Nos.

Steel Almirah Height 6’ width 3’ depth 18” shelves 4

03 Nos

Cash Safe. Height 3’ width 2’ depth 2’ Iron sheet Inner side 18 guage out side 16 guage Locker + 2 drawer.

01 No.

TERMS AND CONDITIONS. 1. Security amount must be deposited equal to 05% of the approximate value of the tender in form of “ Cash Payment “ , “ Call Deposit Receipts “ in favor of State Life Insurance Corporation of Pakistan, Zonal Office Sahiwal which will be refunded to the un-successful parties on the spot and the refundable cash payment or CDR will be detained of the successful parties till the completion of Tender. No tender will be acceptable without earnest money. 2. Rates should be valid for 30 days . Tender closing date 18-09-2012 at 11.00 am. Tender opening date 18-09-2012 at 11.30 am positively. 3. On finding sub standard quality as and when noticed during process, the Deposit Security will be forfeited in favor of the Corporation.

Price must be quoted with Income Tax and G.S.T. as per Govt. Rules.

5. The firm/suppliers in-question will be bound to supply the required items as whole consignment within 10 Days from the issuance date of supply order/ work order. 6. Successful bidder will provide the items in State Life Zonal Office situated nd at 2 Floor Sattar Complex Stadium Road Sahiwal. 7. The bidders will attach their respective copies of N.T.N and Sales Tax Certificates. Order will be placed to bidders on lowest items rates. 8. Sealed Tenders duly completed in all respects must be reached to the undersigned by Courier Service/by post latest by 18-09-2012 at 11.00 am excepted Sunday as per above mentioned data/time. 9. The Income Tax will be deducted @ 3.5% plus 16% surcharge on Income Tax at source on the total value of tender. 10.

The order will be placed to the item wise lowest bidders.

11. Tender documents with complete specification can be obtained from the Office of the undersigned on payment of Rs.100/- as tender fee ( non refundable ) in shape of Pay Order/Bank Draft in favor of State Life Insurance Corporation of Pakistan. 12. The Corporation reserves the rights to cancel/reject or reduce the tender quantity any or all the Tenders. 13. The envelop should be marked QUOTATION STEEL IRON RACKS, ALMIRAH & Cash Safe the rate should be include transportation/Courier Cost. For further details the undersigned may be contacted during working hours in person or telephonically on Phone No. 040-9200027.

Secretary/Member Zonal Procurement Committee, Sahiwal.

Tender Notice Sealed tenders are invited from the well reputed GST registered firms for the supply of Computer Chairs with the following details: S.No. 01

Items Description

QTY

Computer Chairs without arms

150

Specification Hydraulic base Imported/Taiwan or equivalent Foam :Class 1 ,Master/Diamond or equivalent with 10 year warranty Fabric: Good Quality Color: Bright Chair Warranty : At least 3 years

Terms & Conditions: 1.

Tender Documents containing details and terms & conditions can be obtained on payment of Rs.1000/- in shape of pay order/DD drawn in the name of CIIT Islamabad before closing date.

Sealed envelope should reflect the tender title, tender number and its Closing / opening Date (if any).

Tenders complete in all respects should reach the undersigned before 1100 hrs on September 14, 2012 (Friday). The tenders shall be accompanied by Earnest Money (refundable) @ 2% of the quoted price in shape of pay order/ bank draft in favour of CIIT Islamabad. Tenders will be opened publicly at 1130 hrs on the same day in Office of the Purchase Officer at the address given below in presence of the representatives of parties, who like to be present.

Bidders are required to bring furnished samples at the time of submission of bids.

The prices quoted by the bidders would be considered as inclusive of all taxes.

The quantities may vary according to requirements.

The firms/companies with ready-stock will be given preference.

The vendor shall be bound to deliver / complete the approved items/ service within seven days after the issuance of purchase/ work order.

The CIIT reserves the right to accept/reject any proposal or cancel the tender process at any time as per PPRA rules.

Razzaq Ahmed Purchase Officer COMSATS Institute of Information Technology Faculty Block-II ,Park Road ,Chak Shahzad ,Islamabad Tel: 9247000-3 ( Ext â&#x20AC;&#x201C; 5039 & 5040), Cell: 0333-5531126

COMSATS

Institute of Information Technology

Pre-Qualification/Tender Notice Sealed Tenders on item basis are invited from reputed, experienced and registered firms /companies at COMSATS Institute of Information Technology (CIIT) Campus, Chak Shahzad, Islamabad for the works 1. 2. 3. 4. 5.

Providing & Installation of Remote Control Blinds on Windows of Executive Office Faculty Block-I at CIIT. Providing Seal Coat on Carpet Road Behind Academic Block-I to Faculty Block-II at CIIT Campus. Development of Area in Front of Gate No. 02 for Pick & Drop Service of Students at CIIT Campus. Providing Steel Shed for Staff Canteen in CIIT Campus, Chak Shahzad, Islamabad. Civil Works Required in Academic Block-I at CIIT Campus, Chak Shahzad, Islamabad.

The tender documents containing the details and specifications of the materials may be obtained from the office of the undersigned during office hours at the cost of Rs. 1,500/- each non refundable from September 10, 2012 to September 27, 2012 (1100 hours). The tenders will be opened on September 27, 2012 at 1130 hours. _______________________________________________________________________________________ Â&#x2122; CIIT reserves the right to accept or reject part or whole of the tenders any time prior to the acceptance of a proposal. The unsuccessful contractor participating in the tender shall be informed the reason (s) for the rejection of their proposal, however, CIIT shall not be liable to justify those reasons. http://www.ciit.edu.pk www.ppra.org.pk

Project Director CIIT Campus at Park Road, Chak Shahzad Islamabad Phone : 051-9247000-Ext-313

STATE LIFE

Phone # 05827-927454 05827-927455 Fax # 05827-927466 05827-927470

INSURANCE CORPORATION OF PAKISTAN

MIRPUR (AK) ZONE Bary Mian Plaza, Kotli Road, Mirpur (AK)

Dated: 03/09/2012

RE-TENDER NOTICE NO.MRAK/FURNITURE & FIXTURE/05/2012 Sealed financial bids are invited from reputable furniture fixture suppliers preferably registered with Sales Tax Department having their own offices and phone/fax numbers, (if found contrary the tender will be rejected) for the supply of following as per detail given hereunder:

DESCRIPTION OF FURNITURE

Quantity

Delivery

Closing date Date/Time of

Schedule 2012

and time for opening of Bids submission of Bids

Office Tables 5*3*2.5 ft with 3

Within 30 days

drawers in the right and one drawer

after placing

and a shelf/box in the left side

supply order

24.09.2012 at 11:00 a.m.

24.09.2012 at 11:30 a.m.

Revolving Chairs Canning

“do”

“do

“do”

Central Table 3 Pieces each

“do”

“do

“do”

Side Rack 4*2.5*1.5 ft

“do”

“do

“do”

Visitor Chairs with Arm & Cushion

“do”

“do

“do”

Steel Almirah 3*4*6 ft OR File

“do”

“do

“do”

5 Sets Or 25 single seats

“do”

“do

“do”

Rate per Sqft

“do”

“do

“do”

Cabinets 4 drawers Sofa Sets (Five Seater 3+1+1) with Arm & cushion OR Single Seat Foam best quality without Arm Carpet Syntactic with sample for S.O/AO/Zonal Head Sectt TERMS & CONDITIONS: 1. Bids should be sent along with a Pay Order/Bank Draft of the 2% of the bid value in favor of State Life Insurance Corporation of Pakistan, Mirpur (AK) Zone as earnest money, which will be refunded /returned

immediately after the completion of Z.P.C process to the unsuccessful bidders and after satisfactory completion of job to successful bidders. 2. Tender closing/Opening date, Time has mentioned above which should be followed

strictly. Bids not submitted within the stipulated time will not be included in the biding process. 3. The delivery of the items must be made within 30 days after placing the supply order of the required items. 4. Bids will be opened in the office of In-Charge P&GS, State Life, 2nd Floor Baray Mian Plaza, Kotli Road, Sector F-1, Mirpur (AK) on date and time as specified above in the presence of those bidders or their authorized agents, who wish to participate at the occasion of opening of bides. 5. All the bids must include G.S.T. and all other Govt. Taxes where applicable.

6. No bid will be entertained without earnest money. 7. The envelopes should be marked as â&#x20AC;&#x153;QUOTATION FOR FURNITURE AND FIXTUREâ&#x20AC;?. 8. Competent Authority reserves the right to reject all bids or proposals at any time prior to acceptance of a bid or proposal. However State Life on request shall communicate to any supplier or contractor who submitted a bid or proposal, the grounds for its rejection of all bids or proposals but not need to justify these grounds.

9. Income Tax will be deducted as per prevailing rates at the time of payment to the supplier as per Government Rules. GST will be charged and deducted according to GST Rules of Government of Pakistan where applicable. 10. On finding sub standard quality as and when noticed during process, the security deposit may be forfeited in favour of the Corporation. 11. No Transportation Charges for the delivery of items will be payable.

Secretary Zonal Procurement Committee

State Life, Baray Mian Plaza, Kotli Road, F-1 MIRPUR AZAD KASHMIR ZONE, Ph.05827-927454, Fax.05827-927470

VIRTUAL UNIVERSITY OF PAKISTAN TENDER NOTICE FOR FURNITURE MANUFACTURERS Tender No. VU/12-13/09/087 Sealed Tenders from General Sales Tax, Income Tax Registered and well reputed Furniture Manufacturers are invited for the supply of Office Furniture. Tender documents with detailed specifications, terms & conditions are available at a cost of Rs. 1000/- (non-refundable) in shape of cash / PO or DD from below mentioned address. Tender documents shall be available during office hours from 10:00am to 04:00pm (Monday to Friday) after the publication of advertisement. The bid should reach the Procurement Department by September 17, 2012 at 11:00am which will be opened on the same date at 11:30am. The University reserves the right to accept or reject any bid or annul the procurement process at any time as prescribed under PPRA Rules. Tender Notice is available at PPRA Website (www.ppra.org.pk) and universityâ&#x20AC;&#x2122;s website.

_______________

______

PROCUREMENT DEPARTMENT DIRECTORATE OF FINANCE VIRTUAL UNIVERSITY OF PAKISTAN M.A JINNAH CAMPUS, DEFENCE ROAD OFF RAIWIND ROAD LAHORE Phone No. 042-111-880-880 Ext. 333 URL: www.vu.edu.pk

TENDER NOTICE No. CIIT/Fur-FB-I/Faculty Area/2012

Supply of Furniture Sealed bids are invited from the well reputed sales tax registered furniture manufacturers for Supply of Furniture for Faculty Block-I (Faculty Area) as per following detail:

Items Description

Qty

Office Table Type T3 Executive Table with Side Rack Size: 1200x750x750mm high S. Rack Size: 1000x 600x 750mm high (Specification as per approved sample of CIIT)

Medium Back Office Chair (Specification as per approved sample of CIIT)

Visitor Chair (Specification as per approved sample of CIIT)

Tender Documents containing details and terms & conditions can be obtained on payment of

Rs.500/- in shape of pay order/DD drawn in the name of CIIT Islamabad before closing date. 3.

Sealed tenders (duplicate copies), complete in all respects should reach the undersigned before 1100

hrs on September 20, 2012 (Thursday). The tenders shall be accompanied by Earnest Money (refundable) equivalent to 2% of total bid price in shape of pay order/ bank draft in favour of CIIT Islamabad. Tenders will be opened publicly at 1130 hrs on the same day in Office of the Purchase Officer at the address given below in presence of the representatives of parties, who like to be present. 4. The CIIT reserves the right to accept/reject any proposal or cancel the tender process at any time as per PPRA rules.

Purchase Officer

COMSATS Institute of Information Technology Faculty Block-II, 2nd Floor, Park Road, Chak Shahzad, Islamabad Ph: 051-9247000-3 (Ext: 5039, 5040) Cell # 0333-5531126 Fax: 051-9247006

TENDER NOTICE

The University of Malakand invites sealed quotations from reputed firms registered with Sale Tax & Income Tax Department for the purchase of: 1) IP Based Cameras and installation (Re-advertised) 2) Furniture and Fixtures (Fresh Tender) for Botanical Garden and Herbarium. 3) Civil works, Sanitary, Hard ware and Electric items related to â&#x20AC;&#x153;Works Department.â&#x20AC;? Tender documents containing detail information, terms & conditions etc are available on the website of University of Malakand & PPRA. These can also be obtained from the office of the Secretary Purchase Committee on cash payment of Rs.1000/-or bank draft (Non refundable) for each category on any working day except Saturday & Sunday. Downloaded documents must also accompany the requisite tender fee and 2% as earnest money of the Total Quoted Value in the shape of CDR in favor of Dy. Director Finance University of Malakand. Tender proposals found without requisite 2% CDR will stand rejected. Intending supplier must send their Tender/Quotation along with soft copy by post/Courier Services to reach this office up to 10:30 A.M on or before 20/09/2012.Opening date, Time, Venue & other terms & conditions can be seen in the Tender documents. The competent authority reserves the right to accept or reject any or all the tenders/Quotations prior to the acceptance of a bid or proposals & can also increase or decrease the No. of items to be purchased. BAKHT WAHAB DEPUTY DIRECTOR FINANCE/ SECRETARY PURCHASE COMMITTEE UNIVERSITY OF MALAKAND PHONE#0945-761919 Also available on the Web: Site. www.uom.edu.pk& www.ppra.org.pk

Terms & Conditions 1) Each page of the quotations should carry the signature and stamp of the vender. Quotations found with over writing, cutting and interpolation will be considered cancelled. Equal rates of two firms will be finalized on draw. 2) The firm must have the relevant experience certificate for which the form has been obtained. 3) No vender has the right to hand over his work to any other firm without the prior approval of the competent authority. Failing which the tender will be considered cancelled. 4) Income Tax and sales tax will be deducted as per approved rates of the Govt. 5) No advance payment will be made before supply of the items. 6) Cost of goods will be paid on the receipt of the pre receipted bills. 7) The acceptance of articles will be subject to the inspection and approval of the end user at the point of delivery. 8) Items supplied with low quality will be rejected and no payment will be made to the supplier for the rejected items. 9) Warranty/ Guarantee certificate of the items supplied must be attached with the bill. 10) Security at the rate of 8% of the total bill will be deducted for a period of three months and will be released subject to receiving good report from the concerned office. 11) Payment will be made only after satisfactory report of the end user. 12) The firm will give one year guarantee and will be responsible for the after sales service. 13) The equipment shall be supplied in packed form and opened in front of the end user. 14) The firm will be responsible to supply the items within agreed/ stipulated time, failing which 1% of the total payment will be deducted per day. However on the basis of ground reality/ sound reasons, the competent authority may extend the period on the request of the supplier. 15) The competent authority may increase or decrease the quantity. 16) Rates offered shall be valid for a period of four months irrespective of validity period mentioned in quotation from the date of opening of tender. 17) The tender will be opened at 11:00 Oâ&#x20AC;&#x2122;clock on 20/09/2012 in Committee Room University of Malakand in the presence of the intending bidders or their representative.

TENDER DOCUMENTS FOR IP-BASED CAMERAS S.No Name of Item 1 Network IP Camera

5 6

NVR Software Power cable LCD Housing

Services

Specification

Quantity

Full HD 2 Mega pixel Day & Night Indoor IP Camera with 4.3mm/F1.6 lens,0.6lux, ICR, 3D Noise Reduction, 2D WDR, Digital PTZ, Face/Tampering /Motion Detection alarm, H. 264. Motion JPEG, Multi-Supported Protocols DDNS, PPPoE, DHCP, NTP, SNTP, TCP/IP, ICMP, SMTP,FTP, HTTP,RTP, RTSP, UPnP event Notification FTP/Email Profile Video Streaming, 3Axis construction, Multiple Stream, DC12V, with AC adaptor OR Higher specification Digital Zooming Cameras Core i-3 3.1 GHZ, 4GB RAM, 2 TB, Gbit Network Card, DVD-R, Keyboard, mouse for 30 days recordings (HP or Dell Branded) NVR Software (Supported 32 Cameras)

Cabling and Ducting Including UTP Cable, power, PVC Pipe per/duct running ft AOC LCD 21â&#x20AC;? for Cameras Outdoor Housing for cameras (weather proof) if required Installation, configuration and testing the Entire Surveillances Network.

01 01 01 job

FURNITURE AND FIXTURE FOR HERBARIUM BUILDING S#

Item

Specification

Qty

A. Furniture for Lecture Theater: 1.

2. 3.

Dice

Chairs for Stage with Table Plastic Chairs

4ft high x 2ft 6inch wide, 3ft 6inch Broad with stage inclination 450. Additional drawer for paper, inbuilt location for two pens and glass of water, with raised stage for Microphone. Material Glass/Wood. Elegant, Elaborate, carved, with cushion. Front table with elaborate edge carvings 08 chairs fixed in a row of 16ft 8inch to the theater stairs with 3 props (legs) base fixing cost included, colour red. (8x5=40 Nos) Suitable for 20x30 ft hall with 4 speakers fitted in case

6 5

Sound System small 5. Table for 2’x2’x3 ft high Multimedia B. Furniture & Fixture for Museum Halls

Office Table

Office Chair

5.5x3.5 ft. 2.5’ high, Wooden highly polished with in built three drawers, one CPU case and one Keyboard drawer. Revolving

Office Table

Office Chair

3.5x2.5 ft 2.5’ high, Wooden highly polished with in built one drawer, one CPU case and one Keyboard drawer. Revolving

Study Tables

8x3 ft. height 2ft 6inch with highly polished top

Study Chairs

1ft 6inch wide, 1ft 6inch long, 1ft 6inch high and 1ft 6inch high back support with soft seating and back cushion 7. Almirah Wooden, divided into two main compartments longitudinally. Each compartment to be divided into 4 transverse compartments. Each of the eight compartments to be fitted with durable handle in the center for opening and closing, each compartment to be fitted with lock. (detail drawing of almirah is attached) C. Furniture for Rooms of Research Officers 05 No:

Office Table

Office Chair

Wooden Racks

4x4 ft. divided into three rows and 8 compartments. Open faced highly polished durable. D. Furniture & Fixture for Laboratory:

Laboratory Tables

3.5x2.5 ft 2.5ft high, Wooden highly polished with in built one drawer, one CPU case and one Keyboard drawer. Revolving

6x3ft, 2ft 6inch high, Wooden highly polished.

Cost

Total

2. 3. 4.

Laboratory Tables Laboratory Tables Study Chairs

7x3ft, 2ft 6inch high, Wooden highly polished.

9x3ft, 2ft 6inch high, Wooden highly polished.

1ft 6inch wide, 1ft 6inch long, 1ft 6inch high and 1ft 6inch high back support with soft seating and back cushion 5. Almirah Wooden made with glass fitted on doors divided into two main compartments longitudinally. Each compartment to be divided into 4 transverse compartments. E. Furniture for Library:

Office Table

Office Chair

Open faced wooden Book Shelves Periodical Displayer Study Table

Study Chair

1ft 6inch wide, 1ft 6inch long, 1ft 6inch high and 1ft 6inch high back support with soft seating and back cushion F. Furniture for Office of Director & Curator 02 Rooms:

Executive Office Table Executive Office Chair Side Racks

Executive Class 5x4 ft. height 2.5 ft. wooden highly polished durable. Executive Class, revolving leather/ rexin coating.

4x4 ft. divided into three rows and 8 compartments. Open faced highly polished durable. 1ft 6inch wide, 1ft 6inch long, 1ft 6inch high and 1ft 6inch high back support with soft seating and back cushion Glass 2x3 ft.

2 12

2. 3. 4. 5.

Chair for visitors Side table

5.5x3.5 ft. 2.5’ high Wooden highly polished with in built three drawers, one CPU case and one Keyboard drawer. Revolving

3ft broad x 7ft high x 1ft width. wooden single faced. 5 compartments 42” wide x18”broad x45”high. wooden single faced. 4 compartments 8x3ft, 2ft 6inch high wooden highly polished

1 1 18 4 2

G. Blinds and carpet 1.

Blinds Large

6ft 6inch x 5ft 6inch

Blinds Medium

3ft 6inch x 5ft 10inch

Blinds Small

2ft 7inch x 5ft 11inch

Carpet

Three pieces (i)14x14ft (ii)14x14ft (iii)31.5x20ft = (196+196+630 ft) Total

1022ft

SPECIFICATIONS FOR CIVIL WORK, HARD WARE, SANITARY AND ELECTRICAL ITEMS RELATED TO WORKS DEPARTMENT. S.No Description

1 2 3 4

Bricks Sand Crush Cement

1 2 3

Bib cock PVC pipe 4 in Shower Rods Complete

Wooden kari 8’x4”x3” Wooden gaz 8’x2”x1/2” Ceiling sheets (2’ x 2’)

2 3

4 5 6 7 8 9 10 11 12 13 14 1 2 4

Paint (Emulsion) Paint (Distemper) Paint (weather shield) Lime Robin Neil Zinc Chalk Plaster of paris Brush 5 in Brush 3 in Turpentine oil

Specification Quantity Mark Civil items 1 No 2000 nos. 500 cft ½” , 1-1/2” 500 cft Bestway 50 bags Sanitary items Faisal/S.Asia 100 nos Royal PVC 50 links Faisal/ Athif 100 Nos Hard ware items Soft wood 200 nos Soft wood

200 nos

Thermopore sheets & Jibsum (100 each) Burger Burger Burger

200 nos

64 gallons 80 gallons 30 gallons

Power plug Light plug

Best Quality 50 bags Best Quality 24 packets Best Quality 15 kgs Best Quality 15 kgs Best Quality 50 kgs Universal 12 nos Universal 12 nos Tiger 30 gallons Electrical items Hero 50 nos Hero 50 nos

Cable 3.29

Fast Cable

20 bundle

Rate

Amount

Cable 7.29

Fast Cable

20 Bundle

Cable 7.64

Fast Cable

20 Bundle

Cable 7.44 Folding Ladder (Aluminum) 8’ & 12’

Fast Cable

20 Bundle

9 Drill Machine

Best Quality (1 No each)

02 Nos

Germany, England, USA made

02 Nos -

Ministry of Science & Technology Government of Pakistan PCSIR LABORATORIES COMPLEX, PESHAWAR

Terms & Conditions: Tender documents can be obtained from the office of Project Director (R&UEI) at the cost of Rs.500/set (non-refundable) from 10-09-2012. Tender documents can be submitted on or before 01/10/2012 by 11:00am that will be opened in the Committee Room of PCSIR Labs Complex Peshawar on the same date at 11:30AM in the presence of tender opening Committee & bidders or, their authorized representatives. •

Conditional tender will not be accepted.

•

The bid should enclosed 2% earnest money in the form of pay order/ DD in favour of Project Director (R&UEI).

•

Qualified bidder will be responsible to deliver the furniture with in 10 days after getting work order.

•

All Govt. Taxes will be applicable.

•

Late submitted tenders will not be entertained.

•

Participated bidders would have to display their samples for final approval of the Committee.

•

PCSIR reserves the right to accept or reject any or all offers with assigning reason thereof.

Engr. Nazar Ahmed Bhutta, Project Director (R&UEI) PCSIR Laboratories Complex, Jamrud Road, Peshawar-25120 Ph: (Office): 091-9239360, Fax: 091-9218020

PCSIR LABS: COMPLEX PESHAWAR “Renovation & Up-gradation of Existing Infrastructure”

Notice inviting tenders for the manufacturing and supply of Office & Guest House furniture under the PSDP project “Renovation & Up-gradation of Existing Infrastructure”

Sealed tender on prescribed form are invited from Supplier/ Manufacturer having upto date registration of Income Tax & GST for manufacturing & supplying of Office & Guest House Furniture.

Terms & Conditions: Tender documents can be obtained from the office of Project Director (R&UEI), during working days from 9:00am to 4:00pm by applying for on Letterhead and payment of tender cost Rs.500/- (non-refundable) in form of Bank draft in favour of undersigned. No tender documents will be issued on the opening date of tender. Tender documents can be submitted on or before 27/09/2012 by 11:00am that will be opened in the Committee Room of PCSIR Labs Complex Peshawar on the same date at 11:30AM in the presence of tender opening Committee & bidders or, their authorized representatives. •

Conditional tender will not be accepted.

•

The bid should enclosed 2% earnest money in the form of pay order/ DD in favour of Project Director (R&UEI).

•

Qualified bidder will be responsible to deliver the furniture with in 10 days after getting work order.

•

All Govt. Taxes will be applicable.

•

Late submitted tenders will not be entertained.

•

Participated bidders would have to display their samples for final approval of the Committee.

•

PCSIR reserves the right to accept or reject any or all offers with assigning reason thereof.

Engr. Nazar Ahmed Bhutta, Project Director (R&UEI) PCSIR Laboratories Complex, Jamrud Road, Peshawar-25120 Ph: (Office): 091-9239360, Fax: 091-9218020

Ministry of Science & Technology Government of Pakistan PCSIR LABORATORIES COMPLEX, PESHAWAR

Tender notice For the Manufacturing & Supplying of Office & Guest House furniture under the PSDP project “Renovation & Up-gradation of Existing Infrastructure” Sealed tenders on prescribed form are invited from Supplier/ Manufacturer having upto date registration of Income Tax & GST for manufacturing & supplying of Office & Guest House Furniture. Tender documents can be obtained from the office of Project Director (R&UEI) at the cost of Rs.500/set (non-refundable) from 10-09-2012. Tender documents can be submitted on or before 27/09/2012 by 11:00am that will be opened in the Committee Room of PCSIR Labs Complex Peshawar on the same date at 11:30AM in the presence of tender opening Committee & bidders or, their authorized representatives. •

Conditional tender will not be accepted.

•

The bid should enclosed 2% earnest money in the form of pay order/ DD in favour of Project Director (R&UEI).

•

Qualified bidder will be responsible to deliver the furniture with in 10 days after getting work order.

•

All Govt. Taxes will be applicable.

•

Late submitted tenders will not be entertained.

•

Participated bidders would have to display their samples for final approval of the Committee.

•

PCSIR reserves the right to accept or reject any or all offers with assigning reason thereof.

Engr. Nazar Ahmed Bhutta, Project Director (R&UEI) PCSIR Laboratories Complex, Jamrud Road, Peshawar-25120 Ph: (Office): 091-9239360, Fax: 091-9218020

CORRIGENDUM With reference to Tender Notice No. 21/2012 (PID (I) No. 930/2012) published in daily Jang, Express & Dawn (Rawalpindi, Lahore & Karachi) dated 28-08-2012. The tender description clause i.e. (Made in china) was added erroneously which may be deleted from the item description. Moreover tender opening date has been extended up to 24-09-2012. Other terms & conditions will remain unchange.

Sr. Admin Officer PAEC General Hospital H-11/4, Islamabad Phone No. 051-9257171 Ext: 318 Fax No. 051-9258862

COVERING SHEET TENDER NO 1290047/R-1209/310118 DATED 10-09-2012

I/we M/s ________________________________ do herby affirm to adhere to the necessary instructions for participation in the procurement process. All the columns of DPI, II and III are filled, signed and stamped as per requirement. Data Sheet (for unregistered firms only) is attached dully filled in all respects.

Yours truly, _________________ Signature of Tenderer _________________ Complete Name Seal/Stamp of Firm

_________________ Capacity in which Signing _________________ Date

Contact Numbers Assistant Directors Procurement DP(Navy) ADP-31 ADP-32 ADP-33 ADP-34 ADP-36 ADP-37

051-9271471 051-9271472 051-9271473 051-9271474 051-9271475 051-9271478

DP-1 DIRECTORATE PROCUREMENT (NAVY) No.……………………….. …………. Directorate of Procurement (Navy) At Ministry of Defence Production Building Sectt No. II, Adamjee Road Rawalpindi Tel: 051-9271474 Fax : 051-5516307 E-mail: dpnrwp2007@gmail.com adpn31@paknavy.gov.pk M/S SEP 2012 Invitation to Tender and General Instructions 1. Conditions Governing Contracts. The ‘Contract’ made as result of this I/T shall mean the agreement entered into between the parties i.e. the ‘Purchaser’ and the ‘Seller’ on Directorate General Defence Purchase (DGDP) contract Form “DP-19” in accordance with the law of contract Act, 1872 and those contained in Defence Purchase Procedure (DP-35) and other special conditions that may be added to given contract for the supply of Defence Stores specified herein. 2.

Understood agreed

Understood not agreed

Delivery of Tender. The offer is to be submitted in duplicate as under:a. Commercial Offer. The offer will be in duplicate and indicate prices quoted in figures as well as in words alongwith essential literature/brochure. It should be clearly marked in fact on the envelope “Commercial Offer”, tender number and date of opening. Taxes, duties, freight/transportation, insurance charges etc are to be indicated separately. Total price of the items quoted against the tender is to be clearly mentioned. b Technical Offer: (Where Applicable). Should contain all relevant specifications in triplicate in an envelope and clearly marked “Technical Offer” without prices, tender number and date of opening. a. Special Instructions. Tender documents and its conditions may please be read point by point and understood properly before quoting. All tender conditions should be responded clearly. In case of any deviation due to nonacceptance of tender conditions(s), the same should be highlighted alongwith your changed offer/conditions. Tender may however be liable to be rejected. d. Firms shall submit their offers in two separate envelopes (i.e. two copies of commercial offer and two or more copies of the

Understood agreed

Understood not agreed

Understood agreed

Understood not agreed

Understood agreed

Understood not agreed

technical offer as asked in the IT). The commercial offer will include rates of items/services called for and the technical offer will not indicate the rates. Both types of offers are to be enclosed in separate covers and each envelope shall be properly sealed bearing the signature of the bidder. Each cover shall indicate type of offer, number and date of IT and IT opening date. Thereafter both the envelopes (technical and commercial offer) shall be placed in one envelope (second cover) duly sealed and signed. This cover should bear the address of the procurement agency indicating, issuance date of IT and No, with its opening date. This should be further placed in another cover (third cover), addressed as indicated in the tender documents, without any indication that there is a tender within it. e.

The tender duly sealed will be addressed to the following:Directorate of Procurement (Navy)/P-31. At Ministry of Defence Production Building Secretariat No. II, Adamjee Road Rawalpindi, PAKISTAN Telephone: 92-051-9271468-78 Fax No. 92-051-5516307 E-Mail: dpnrwp2007@gmail.com

3. Date and Time For Receipt of Tender. Tender must reach this office by the date and time specified in the Schedule to Tender (Form DP-2) attached. This Directorate will not accept any excuse of delay occurring in post. Tenders received after the appointed/ fixed time will NOT be entertained. The appointed time will, however, fall on next working day in case of closed/forced holiday. Only legitimate/registered representatives of firm will be allowed to attend tender opening. 4. Tender Opening. Tenders will be opened as mentioned in the schedule of tender. Commercial offers will be opened at later stage if Technical Offers are declared acceptable on examination by technical authorities of PN. Date and time for opening of Commercial offer shall be intimated later. Only legitimate / registered representative of firm will be allowed to attend tender opening. 5.

Understood agreed

Understood not agreed

Understood agreed

Understood not agreed

Understood agreed

Understood not agreed

Understood agreed

Understood not agreed

Validity of Offer. a. The validity period of quotations must be indicated and should invariably be 90 days extendable to 120 days from the date of opening of commercial offer. Conversion rate of FE/LC components will be considered w.e.f. opening of commercial offer. b. The quoting firm will certify that in case of an additional requirement of the contract items (s) in any qty(s) with in a period of 12 month from the date of signing the contract, these will also be supplied ( at the on going contract rates) with discount.

6. Part Bid. Firm may quote for the whole or any portion, or to state in the tender that the rate quoted, shall apply only if the entire quantity is taken from the firm. The Director Procurement reserves the right of accepting the whole or any part of the tender or portion of the quantity offered, and firm shall supply these at the rate quoted. Understood agreed

Understood not agreed

8. Return of I/T. In case you are Not quoting, please return the tender inquiry stating the reason of NOT quoting. In case of failure to return the ITs either quoted or not quoted consequently on three occasions, this Directorate, in the interest of economy, will consider the exclusion of your firmâ&#x20AC;&#x2122;s name from our future distribution list of invitation to tender.

Understood agreed

Understood not agreed

9. Withdrawal of Offer. If the firm withdraws it offer within validity period the competent authority may place such firm under embargo for a period, which may be extended up to one year.

Understood agreed

Understood not agreed

7. Quoting of Rates. Only one rate will be quoted for entire quantity, item wise.

10. Provision of Documents in case of Contract on Earnest Money.. In case any firm wins a contract on EM, it will deposit following documents for provisional registration before award of contract:

Understood agreed

Understood not agreed

Understood agreed

Understood not agreed

Understood agreed

Understood not agreed

a. A copy of letter showing firmâ&#x20AC;&#x2122;s financial capability. b. Foreign Seller has to provide its Registration Number issued by respective Department of Commerce authorizing export of subject stores. c. Principal/Agency Agreement.

11.

Return of Earnest Money. a. Earnest Money to the unsuccessful bidders will be returned on finalization of the contract. b. Earnest Money of the firm/firms with whom contract is concluded will be returned on submission of Bank Guarantee as stipulated in the contract.

12. Earnest Money/Tender Bond: your tender must be accompanied by a Bank Draft in favour of CMA (DP), Rawalpindi for the following amount: a.

Registered/Indexed Firms: 2% of the quoted value only.

Registered but Un-indexed Firms: 3% of the quoted value only.

Un-registered/Un-indexed Firms: 5% of the quoted value only

In case of firm wins a contract on EM, it will deposit following documents for provisional Regn before the award of contracts:

S. No. i)

Local Supplier

Foreign Supplier

Three filled copies of SVA-8121 of each member of management

Three filled copies of SVA-8121D of each member of management Three filled copies of SVA-8121 Three photocopy of Resident Card or equivalent identification Card for each member of management Three PP size photographs for each member of management Challan Form (*) Financial standing/audit balance sheet Photocopy of passport Agency Agreement in case of Trading House/Company/ Exporter/Stockiest etc.

ii) iii)

Three filled copies of SVA-8121-A Three photocopy of NIC for each member of management

iv)

Three PP size photographs for each member of management Challan Form (*) Bank Statement for last one year

v) vi) vii) viii)

Photocopy of NTN Foreign Principal Agency Agreement in case of local agent

Attached

13. Treasury Challan. a. Offers must be accompanied with a challan form of Rs.200/(obtainable from State Bank of Pakistan/Government Treasury) and debitable to Major Head XL VII, Main Head XII, Sub Head ‘A’ Miscellaneous Code No Def – 1220. Each offer will be covered by one challan.

Not Attached

Attached

Not Attached

Understood agreed

Understood not agreed

b. In case of un-registered firms, whether they have applied for registration or not, will pay tender inquiry fee (Challan Form) at following rates: (1) Contract for value upto. Rs. 250,000/- :

Rs 1,000/-

(2) Contract for value from Rs. 250,000/- to Rs.5,000,000/-

Rs. 1,500/-

(3) Contracts for value above 5,000,000/-

Rs. 2,000/-

14.

Inspection Authority. Understood agreed

Understood not agreed

Inspection Authority will be CINS

b. Joint Inspection of store, after receipt at consignee warehouse will be carried out by Consignee and Specialist User. However, functional tests and trials prior final acceptance will be carried out by end user

15. Condition of Stores. Brand new stores will be accepted on Firmâ&#x20AC;&#x2122;s Warranty/Guarantee Form DPL-15. Copy of DPL-15 can be obtained from DP(N) on e-mail address given on page 1.

16. Marking. Marking Spec/Misc/NS/002/80.

stores

accordance

17. Documents Required. submitted along with the quote:

Following documents are required to be

Understood agreed

Understood not agreed

with

Understood agreed

Understood not agreed

Understood agreed

a. OEM/Authorized Dealer/Agent Certificate along with OEM Dealership Evidence. b. The supplier is to provide OEM conformance certificate to CINS through respective ADsP/DAs or it is to be e-mailed to CINS directly by OEM. Hard copy of conformance certificate must follow, in any case, through DHL courier. On receipt, PN can approach the OEM to confirm whether an OEM conformance certificate has been issued by them. Companies/firms rendering false OEM conformance will be blacklisted. c.

Original quotation/proforma invoice.

d. In case of bulk proforma invoice, a certificate that prices indicated in the bulk proforma invoice have not been decreased since the date of bulk proforma invoice from the manufacturers/suppliers. e. Submit breakup of cost of stores/services on the following lines: (1) Imported material with break down item wise alongwith import duties. (2) Variable business overheads like taxes and duties imposed by the federal/provincial government as applicable:(i) General Sales Tax (ii) Income Tax

(iii) Custom Duty. PCT code along with photocopy of the related page is to be attached where applicable. (iv) Any other tax/duty. (3) Fixed overhead charges like labour, electricity etc. (4) Agent commission/profit, if any. (5) Any other expenditure/cost/service/remuneration as asked for in the tender.

Understood agreed

18. Rejection of Stores/Services. The stores/services offered as a result of contract concluded against FOR tender may be rejected as follows: a. b. c.

1st rejection on Govt. expense 2nd rejection on supplier expense 3rd rejection contract cancellation will be initiated.

19. Security Deposit/Bank Guarantee . To ensure timely and correct supply of stores the firm will furnish an unconditional Bank Guarantee(BG) from a schedule Bank for an amount of 10 % of the contract value (excluding Taxes, duties/freight handling charges) on a Judicial Stamp Paper of the value of (Rs 100.00) as per prescribed format or in shape of CSD/Bank draft. The Bank Guarantee shall be endorsed in favour of CMA(DP) Rawalpindi who is the Accounts Officer specified in the contract. The CMA(DP) Rawalpindi have the like power of seeking encashment of the Bank Guarantee as if the same has been demanded by the purchaser himself. The Bank Guarantee shall be produced by the supplier within 30 days from the date of issue of the contract and remain valid for upto 60 days after completion of warranty period and remain in force till one year ahead of the delivery date given in the contract. If delivery period is extended, the supplier shall arrange the extension of Bank Guarantee within 30 days after the original delivery period to keep its validity always one year ahead of the extended delivery period. The BG form can be obtained from DP(N) on e-mail address given on page 1. 20. Integrity Pact. Procurements exceeding Rs 10 Million shall be subject to an integrity pact, between the procuring agency and the suppliers or contractors. The form is available at www.ppra.org.pk or can be requested at dpnrwp2007@gmail.com.

21. Correspondence. All correspondence will be addressed to the Purchaser. Correspondence with regard to payment or issue of delivery receipt may be addressed to CMA Rawalpindi & Consignee respectively with copy endorsed to the purchaser. 22. Pre-shipment Inspection. PN may send a team of officers including DP(N) member for the inspection of major equipments and machinery items at OEM premises..

Understood agreed

Understood not agreed

Understood agreed

Understood not agreed

Understood agreed

Understood not agreed

Understood agreed

Understood not agreed

23. Amendment to Contract. Contract may be amended/modified to include fresh clause (s) modify the existing clauses with the mutual agreement by the supplier and the purchaser; such modification shall form an integral part of the contract. 24. Discrepancy. The consignee will render a discrepancy report to all concerned within 60 days after receipt of stores for discrepancies found in the consignment. The quantities found short are to be made good by the supplier, free of cost. 25.

Understood agreed

Understood not agreed

Understood agreed

Understood not agreed

Understood agreed

Understood not agreed

Understood agreed

Understood not agreed

Understood agreed

Understood not agreed

Price Variation. a. Prices offered against this tender are to be firm and final. b. Where the prices of the contracted stores/raw material are controlled by the government or an agency competent to do so on government behalf then price increase/decrease will be allowed at actual on case to case basis on production of government notification by the Supplier for the subject stores where the firms are contractually obliged and bound to produce the stores from raw materials supplied by government/State controlled departments in consultation with Military Finance. c. Except for calculation or typographical errors, the rates of the contracts not having a price variation clause PVC clause will not be increased subsequently. But when such an increase is considered desirable in the interest of expeditious supply of stores and is necessitated by the circumstances beyond the control of the Supplier, the case may be decided accordingly.

26. Price Reduction (PR). In case the stores on inspection are found to be below the stipulated specification and these are proposed to be accepted by the inspector under deviation subject to be certain price reduction, the relevant Inspection Note may be released and stores dispatched to the consignee with the following endorsement on the Inspection Note: â&#x20AC;&#x153;Accepted under deviation with certain price reduction, as recommended on deviation form, which is subject to final approval/decision by the Purchaserâ&#x20AC;? The supplier will not submit the bills unless price reduction aspect is finally decided upon by the purchaser and formal amendment to this effect is issued in the contract.

27. Buy back. The seller will buy back the spares/items supplied as a part of this tender at the selling price, which are no longer required as indicated by the buyer with in five years from the final acceptance of the spares/items.

The supplier will not be held responsible for 28. Force Majeure. any delay occurring in supply of equipment due to event of Force Majeure such as acts of God, War, Civil commotion, Strike, Lockouts, Act of Foreign Government and its agencies and disturbance directly affecting the supplier over which events or circumstances the supplier has no control. In such an event the supplier shall inform the purchaser within 15 days of the happening and within the same timeframe about the discontinuation of such circumstances/happening in writing. Nonavailability of raw material for the manufacture of stores, or of export permit for the contracted stores from the country of its origin, shall not constitute Force Majeure.

Understood agreed

Understood not agreed

Understood agreed

Understood not agreed

Understood agreed

Understood not agreed

Understood agreed

Understood not agreed

Understood agreed

Understood not agreed

29. Arbitration. All matters of dispute or difference regarding rejection of stores by the inspector or cancellation of the contract by the Purchaser, arising out of the contract finalized between the parties thereto, the settlement of which is not otherwise specially provided for in the contract, shall be referred to arbitration as under: a.

Foreign Currency (FOB/CIF/C&F/FSA etc) Contracts (1). The dispute shall be referred for adjudication to two arbitrators one to be nominated by each party. Who before entering upon the reference shall appoint an umpire by mutual agreement and if they do not agree a judge of the Superior Court will be requested to appoint the umpire. The arbitration proceedings shall be held in Pakistan and under Pakistan Law. (2). The venue of arbitration shall be the place from which the contact is issued or such other places as the Purchaser at his discretion may determine. (3). Arbitration award so given will be firm and final.

b. Indigenous (FOR etc) Contracts.The settlement of dispute, is not otherwise specially provided for in the contract, through arbitration clause in the contract shall be referred to the decision of Secretary, Ministry of Defence (DP Division). His decision shall be final and binding on both the parties. Work under the contract shall if reasonably possible continue, under the proceedings before the said Secretary and no payments payable by the Director shall be withheld on the account of such proceeding unless they are subject of the dispute. 30. Court of Jurisdiction. In case of any dispute only court of jurisdiction at Rawalpindi shall have jurisdiction to decide the matter. 31. Liquidated Damages(LD). Liquidated Damages upto 2% per month are liable to be imposed on the suppliers by the purchaser in accordance with DP-35, if the stores supplied after the expiry of the

Understood agreed

Understood not agreed

delivery date without any valid reasons. Total value of LD shall not exceed 10% of the contract value. 32. Risk Purchase. In the event of failure on the part of supplier to comply with the contractual obligations the contract will be cancelled at the Risk and Expense of the supplier in accordance with DP-35.

Understood agreed

Understood not agreed

Understood agreed

Understood not agreed

33. Penalty. In case of wrong supply of the item by the supplier, a penalty of 10 % of the contract value may be imposed by DP(N) apart from any other penalties. 34. Gratuities/Commission/Gifts. No commission, rebate, bonus, fee or compensation in any form shall be paid to any local or foreign agent, consultant representative, sales promoter or any intermediary by the Manufacturer/Supplier except the agent commission payable as per the agent commission policy of the government and as amended from time to time and given in the contract. Any breach of such clause(s) of the contract by Manufacturer/Supplier and/or their sole nominated representative may result in cancellation of the contract blacklisting of the Manufacturer/Supplier financial penalties and all or any other punitive measure which the purchaser may consider appropriate. 35.

Understood agreed

Understood not agreed

Termination of Contract. a. If at any time during the currency of the contract the Purchaser decides to terminate the contract for any reason whatsoever (other than for reasons of Non-Delivery) he shall have right to do so by giving the Supplier a registered notice to that effect. In that event the Purchaser will accept delivery at the contract price and terms of such stores/goods/services which are in the actual process of manufacture that is completed and ready for delivery within thirty days after receipt by the Supplier of such notice. b. In the case of remainder of the stores/goods/services the Purchaser may elect either:

undelivered

Understood agreed

Understood not agreed

c. Should the Supplier fail to deliver goods/services in time as per quality terms of contract or fail to render Bank Guarantee within the stipulated time period or any breach of the contract the Purchaser reserves the right to terminate/cancel the contract fully or any part thereof at the risk and expense (RE) of the Supplier. 36. Rights Reserved. Directorate Procurement (Navy), Rawalpindi reserves full rights to accept or reject any or all offers including the lowest, before formal Final Acceptance of any offer. Particular reasons for cancellation of tender/offer/bid will be intimated upon request of bidder. 37. Application of Official Secret Acts. All the matters connected with this enquiry and subsequent actions arising there from come within the scope of the Official Secret Act, 1923. You are, therefore, requested to ensure complete secrecy regarding documents and stores concerned with the enquiry and to limit the number of your employees having access to this information. 38. Acknowledgment. Firms will send acknowledgement slips within 07 days from the date of receipt of IT. In case IT is not received by a registered firm within 10 days IT published in the Bulletin, the firm must ask for it from concerned procurement agency in writing with intimation to Registration Section (DGDP) or visit www.ppra .org.pk to download the required tender.

39.

Disqualification. Offers are liable to be rejected if:a. Received later than appointed/fixed date and time. b. Offers are found conditional or incomplete in any respect. c. Any deviation from the General /Special/Technical Instructions contained in this tender. d. Forms DP-1, DP-2,and DP-3 duly signed, if NOT received with the offers. e. Taxes and duties, freight/transportation and insurance charges NOT indicated separately as per required price breakdown mentioned at Para 17. f. Treasury challan is NOT attached with the offer. g. Multiple rates are quoted against one item. h. Manufacturerâ&#x20AC;&#x2122;s relevant brochures and technical details on major equipment assemblies are not attached in support of specifications. j. Subject to restriction of export license. k. Offers (commercial/technical) containing non-initialed/ unauthenticated amendments/corrections/overwriting. l. If the validity of the agency agreement expired at the time of submission of offer. m. The commercial offer against FOB/CIF/C&F tender is quoted in local currency and vise versa.

Understood agreed

Understood not agreed

n. Principals invoice in duplicate clearly indicating whether prices quoted are inclusive or exclusive of the agent commission is not enclosed. p. Earnest money is not provided. q. If validity of offer is not quoted as required in IT or made subject to confirmation later. r. Offer made through Fax/E-mail/Cable/Telex. s. If offer is found to be based on cartel action in connivance with other sources/ participants of the tender. t. If OEM and principal name and complete address is not mentioned. u. Stores or any parts thereof are originated/manufactured from India, Israel or Taiwan. 40. The above terms and conditions are confirmed in total for acceptance.

Sincerely yours, _____________________________ (To be Signed by Officer Concerned) Rank:__________________________ NAME:_________________________ NOTES 1. FORM DP-1, DP-2, DP-3 and Questionnaires. Form DP-1, DP-2, DP-3 and Questionnaires duly filled in are to be returned with the offer duly signed by the authorized signatory/person. It is pertinent to mention that all these are mandatory requirement for participation in the tender. 2. Copy of DP-35 Revised 2002: Copies of DP-35 revised 2002 are available with Registration Section DGDP and the same be obtained by the Supplier on payment at the rate of Rs 250/- each.

(Signatures of Tenderer) ……………………………………. (Capacity in which signing)

DP-2

INVITATION TO TENDER FORM 1. Schedule to Tender No. 1290047/R-1209/310118 dated 10-09-2012. This tender will be closed for acceptance at 1000 Hrs and will be opened at 1100 Hours on 10-10-2012. Please drop tender in the Tender Box No.107. 2. You are requested to please use this Performa for price quotation, fill in the prices, affix your stamp on the same, sign it and forward it in original as your Commercial offer along with the covering letter of your firm. If you do not use this form as price quotations your offer might be rejected. 3. Please tick the prescribed IT instructions and confirm complied or not complied in the column given in front of each instruction. 4. You are requested not to use ink of any colour other than black and there should be no writing / overwriting except in the column / columns specified for that purpose. 5. Any overwriting will render your offer liable for rejection. 6. You are requested to please attach DP-1,DP-2 and DP-3 along with your quotation duly signed & stamped. S.No 4919725136298

DETAIL OF STORES

QTY/ UNIT

UNIT PRICE

ESD WORK BENCHES WITH CHAIRS 01

DETAILS Annexes: A. B.

Detailed Specifications General Requirements/Instructions

Special Note: All participating firms must submit technical offers in duplicate in original (one for TSR committee and one for DP(Navy)). In case of failure to comply, offer will liable for rejection.

TOTAL PRICE

GENERAL CONDITION GENERAL CONDITION S.NO

CONDITION

Basis for Acceptance:

FOR Basis Quantity/Requirement: Quantity of store can be increased/ decreased as per requirement / discretion of purchaser.

Country of Origin Preferably UK USA, Western EU.

Inspection Authority CINS However Joint inspection to be carried out by CINS and end user. CRV to be issued after functional test onboard. Delivery Period

06 Months after contract signing Earnest Money Firms Registered / Indexed : 02 % of quoted value. Firms Registered But Un-Indexed : 03 % of quoted value. Firms Un-Registered / Un-Indexed : 05 % of quoted value.

07 08 09 10 11 12

Validity of Offer 90 t0 120 days After Tender Opening TSR (Technical Scrutiny) Required Tender Nature Open Tender Basis AS PER PARA-2 OF ANNEX B Marking Marking of stores in accordance with international standards. Currency of Contract All participating firms are to quote in US$. Following documents are also required Original quotation/Proforma invoice and in case of bulk Proforma invoice, a certificate that prices indicated in the bulk Proforma invoice have not been decreased since the date of bulk Proforma. Invoice form the manufacturers. "Suppliers" must be attached in support of the prices quoted. Only one rate will be quoted for entire quantity, item wise.

FIRMâ&#x20AC;&#x2122;S REMARKS

Each and every clause of the tender documents is to be addressed. No clause/ column of the tender document should be un addressed. Furthermore, the specifications and IT conditions are to be confirmed in technical offer in total for acceptances.

Lab testing charges, if arranged out of service facility, will be borne by the supplier. Certificate of Conformance by OEM

The firm /supplier shall provide correct and valid e mail and fax number to CINS and DP (Navy). Supplier /contracting firm shall either provide OEM conformance certificate to CINS or is to be e mailed to CINS under information to DP(Navy) Hard copy of conformance certificate must follow, in any case, through courier. On receipt, CINS shell approach the OEM for verification of conformance certificate issued by the OEM. Companies/firms rendering false OEM conformance certificate will be black listed. Compensation on breach of contract If the contractor fails to supply of contracted stores or contract is cancelled either on RE or without RE or contract become ineffective due to default of supplier / seller or stores / equipment declared defective and caused loss to the Government, contractor shall be liable to pay to the Government compensation for loss or inconvenience resulting for his default or from the rescission of his contract when such default or rescission take place such compensation will be in excess to the RE amount, if imposed by the competent authority. Compensation amount in terms of money will be decided by the purchase officer and will be deposited by contractor / seller in Government treasury in the currency of contract. Performance Bank Guarantee Successful registered bidder is to submit unconditional performance bond in shape of bank guarantee equal to 05% of contracted value .within 30 days after signing of contract. For successful unregistered bidder the said amount is 10% of contract value. The performance bond is to remain valid till the completion of Warranty Period.

Port Charges in case of FOB Contracts All port and Dock dues in Pakistan for FOB, CIF, FCA and CIP contracts (if applicable) will be paid by Supply Officer PN Embarkation HQ Karachi.

ANNEX ‘A’ TO INDENT NO1290047/R-1209/310118 DATED S No 1.

September 2012

DETAILED TECHNICAL SPECIFICATIONS a. Scope of supply: Supply and installation of 18 test/work benches in the ESD Lab. The equipment inclusive all accessories should be compliant with international standard IEC 61340-5-1. The ESD products should meet with clean room requirements and comprising international standard EN ISO 14644-1 class 7. Detailed specifications are as follows:

Technical Specification: (1) (2) (3) (4) (5) (6) (7) (8)

Work Bench WB-ESD (WB818 ESD TRESTON). Upright profiles AL2X-W (AL2X180W TRESTON). Accessory frame AKK (AKK180 TRESTON). Shelf ALH-ESD (ALH180 ESD TRESTON). Adjustable shelf ASH-ESD (ASH70 ESD TRESTON). Swivel arm with tray AKV400 ESD (TRESTON). Bench Top ESD-mat PM-157a/w accessories (TESTRON). Steel cabinet with 03 Drawers (TRESTON). (a) (b) (c)

(9). (10). (11). (12). (13).

Cover MLS. ML02 ESD (1x60, 2x120). MLX1 ESD Dividers.

18 x Upholstered Chair TTJ3 ESD Chair (TRESTON). Keyboard shelf (NT500 ESD Swivel arm for LCD TRESTON). PC Stand CPU (PC Stand CPU TRESTON). Channel with 03+10 sockets (CJK70 Set TESTRON). Overlight OL (OL254/E TESTRON).

ESD TEST WORK BENCH. Test benches should have following specifications: a. Bench should preferably have a top area of 800 x 1800 ft2 with an essential side top extension unit of 800 x 400 ft2 or more. Side top unit should be mountable on either side of the bench. The bench should have adjustable feet for fine leveling. b. Adjustable worktop height by manual allen key between 700 to 1100 mm and load capacity of upto 250 Kg. c. Complete bench top & extension unit should be covered with ESD matting. d. Each bench should be fitted with fixed ESD shelf of 310 x 1800 ft2. Shelf should have a minimum load capacity of 50 Kg. e. Each bench should be fitted with adjustable ESD shelving units 400 x 1800 ft2 area with Continuous adjustment for depth, height and angle and a minimum load capacity of 35 Kg. Shelf should have lipped front edge.

Firm’s Reply /Remarks

f. Atleast 26mm or higher static dissipative high pressure laminate on all surfaces on the test bench and its accessories with: (1) Surface to ground resistance: 106 to 108 Ohms. (2) Surface to surface resistance: 106 to 109 Ohms. (3) Resistant to heat, solder flux, most chemicals and solvents. g.

Proper contact between static dissipative laminate and earthing point

h. Earthing cables of all accessories should be connected to the earthing point of the work bench j. k.

Earth connection via atleast 1 Mega Ohm protective resistor. Mandatory accessories fitted on/provided with each work bench are as follows: (1) Tray attached to swivel arm for placing tools should be lockable, angle adjustable steel tray with swivel radius of 360°. Length of swivel arm should be 590 mm with Max load capacity of 15 kg. Tray and arm should be made of semi-conductive epoxy powder coated steel. (2) Pull-out keyboard shelf with integral wrist support and mouse pad to mount underneath the bench worktop. Outer dimensions (D x L x H) 250 x 500 x 110 mm. (3) Adjustable holder for vertical CPU to mount underneath the bench worktop and out of the operator’s way. Approx width 130 to 240 mm and height 395 to 500 mm. (4) Swivel arm and plate to suit and fixing of LCD monitors with mounting holes at 75/100 mm centers with the bench. The arm should be double articulated, turns through a radius of 180° and will extend between 95-425 mm from the upright (5)

Electric panel/trunking with 06 power sockets within easy reach.

(6) Overhead light fitted all fixtures, capable of providing minimum of 800 lux light at the work area of the bench top. (7) 24 basic upholstered ESD compliant swivel chairs having conductive back plastic panel, inflammable fabric with base and foot rest. Should have back rest tilt and shift adjustments with gas lift controls height adjustment. The back rest should be mechanically adjusted with Conductive swivelling twin castors, which are braked when unloaded. Minimum seat size of 440 x 440 mm. (8) Ergonomically footrest made of black conductive polystyrene PS with corrugated surface is to prevent slip, fluted foot exercise roller. (9)

Earthing box for connecting wrist straps and other accessories to

ground. Each box to include a 3 m earth lead for connection to ground or to the earthing point of the workbench.

l. Steel drawers as part of centrally locked high quality steel cabinet for storage of tools and small ESD components. Mounted under workbenches with brackets included. Steel cabinets are semi-conductive epoxy powder coated in paint with central locking. Drawer handle should be anodised aluminium. Load capacity 35 kg/drawer minimum with drawer size 500 x 406 mm. Top drawer to include 6-7 compartments of Conductive polystyrene (ESD). SPARES Supplier/OEM is to include list of major and minor spares required to maintain the system for next ten years. Item wise price of spares is to be provided.

ORIGIN OF EQUIPMENT Preferably UK, USA or Western Europe.

ACCEPTABLE MAKES M/s TRESTON or M/s SPC, MULTICOMP, SSE or equivalent.

PROVISION OF SPARES/CONSUMABLES Supplier is to provide OEM recommended parts including consumables required for scheduled maintenance/operation for 01 year operation of the equipment (List to be provided with the proposal for vetting).

PROVISION OF BROCHURE The OEM brochure of the equipment containing all technical details is to be provided by the supplier alongwith technical offer.

CERTIFICATE OF CONFORMANCE BY OEM DP(N) shall ask contracting firms to either provide OEM conformance certificate to CINS or is to be e-mailed to CINS directly by the OEM. Hard copy of conformance certificate must follow in any case through courier. On receipt CINS shall approach the OEM for verification of conformance certificate issued by the OEM Companies/firms rendering false OEM conformance certificates will be black listed

PROVISION OF DOCUMENTATION Firm is to obtain clearance from OEM regarding availability of documentation as per PN requirement. Later on after contract conclusion no relaxation in this regard will be entertained.

10.

TECHNICAL REJECTION In case of non-compliance to any of the clause of Annex A to IT, offer is subject to technical rejection.

ANNEX ‘A’ TO INDENT NO1290047/R-1209/310118 DATED

September 2012

S NO GENERAL REQUIREMENTS/CONDITIONS

DELIVERY SCHEDULE

The equipment/stores are to be delivered within 06 months from the date of signing of contract on FOR basis. PAYMENT TERMS: a.

As per DP-35 or as decided by DP(N).

70% payment on: (1) Receipt of all materials, documents, and procedures etc as per acceptance criteria of contract as per agreed procedure.

(2)

Satisfactory acceptance by JIC (Joint Inspection Committee).

(3)

Issuance of CRV.

30% payment on: (1)

Successful installation, commissioning and acceptance.

(2) Trials of the equipment by OEM/firm to the satisfaction of the end user.

(3) Issuance of EIUC (End Item Utilization Certificate), within 01 month after successful completion of test and trials by the end user. WARRANTY/GUARANTEE a.

Supplier is to guarantee that product is as per specs of the contract.

b. Complete equipment including accessories/software are to be warranted by the supplier for a period of 01 year, for all defects from the date of final acceptance by PN. c. The supplier is to guarantee that all the items supplied under the terms of this contract are of the latest version, OEM certified and brand new. Stores not procured directly from OEM or his authorized dealer/agent/stockist will not be acceptable. d. The supplier is to guarantee that materials used, whether or not of his manufacture, conform to the international quality standards for such equipment. e. Post delivery, the OEM will replace DDP at consignee's warehouse on the basis of free of cost within 30 days every article or part thereof which before use or in use shall be found defective or not within the limits and tolerances of specifications, or in any way not in accordance with the terms of

FIRM’S REPLY /REMARK

the contract at the time of Joint Inspection.

f. In case of OEMâ&#x20AC;&#x2122;s failure to replace the defective stores free of cost within 30 days he will refund relevant cost DDP at consignee's warehouse in the currency in which received along with a reasonable compensation as claimed by PN. LOGISTIC SUPPORT

Manufacturer/OEM/supplier to certify that the spares will be available to support the supplied equipment for at least 15 years. DOCUMENTATION a. 02 Sets of following books and catalogues be provided at the time of supply/delivery of the equipment at NSD: Operator Manual b.

Operator manual containing: (1) (2) (3)

Equipment description, operation & specifications. Standard illustrated parts list. Operator level maintenance requirements.

Maintenance Manual c.

Maintenance manual containing: (1) OEM recommended trouble-shooting procedures. (2) Servicing, maintenance, adjustment / test, removal /installation of subassemblies/parts. (3) List of vendors (names/addresses). (4) Illustrated Parts Catalogue (IPC)/ Parts Identification List (PIL).

d. Firm will provide 01 set of above documents against IT for study of PN, at the time of TSR. Photocopy of the documents will not be acceptable. ADDITIONAL INSTRUCTIONS Certification Requirement at the time of inspection a. Supplier/OEM will confirm through OEM certificate at the time of supply/delivery of the equipment at NSD that equipment being supplied is proven equipment. b. Supplier through certificate is to confirm that he will provide import documents at the time of delivery of stores. c. Supplier certificate for conformance of 100% contract specification, (any deviation to be clearly indicated in the offer) will be provided at the time of delivery of stores. d. Supplier is to be bound to re-calibrate the equipment during warranty period free of cost.

e. OEM’s “Certificate of Conformity” originating from “Principle” who is neither the OEM nor the OEM’s authorized dealer/agent/stockist will not be acceptable. Additional Purchase f. OEM/supplier is to provided an undertaking that in case purchaser wishes to buy additional quantity/number of stores within next 12 months after the completion date of the contract, the supplier will provide the equipment at the same cost. The supplier may however sell stores at a lower cost. g. OEM’s “Certificate of Conformity” originating from “Principle” who is neither the OEM nor the OEM’s authorized dealer/agent/stockist will not be acceptable Obtaining of Licenses h. It is the responsibility of the supplier to obtain licenses/permits etc (if any) in the seller’s country. Failure to obtain the same shall not constitute grounds for Force Majeure. Packing j. Packing of equipment should be of international quality standards to be worthy of air, sea, rail and road transportation.

Joint Inspection Committee k. A joint inspection committee comprising reps from CINS, NPEC and NSD will carryout joint inspection of delivered equipment/stores at NSD within 15 days of receipt of stores. Para 3 e above also refers. Origin of Supply l. Supplier in his” Offer/Quotation” is to specifically mention country of origin for the stores which will be subsequently endorsed in the “Contract”.

Discontinuation of Production m. In case of discontinuation of production of any component part as result of obsolescence of development of upgraded version, the seller is to inform the buyer at least one (01) year in advance. The seller will ensure the provision of such components /parts as demanded by the buyer prior discontinuation of the production and shall also provide alternate for such components/parts in case the original is not available. Quality Standards n. The equipment and accessories are manufactured and assembled in accordance with Western EU standards or equivalent. The Quality standards compliance certificate is to be submitted with the offer.

p. OEM be ISO or own country’s (in case of Western EU) standards certified. Certificate to this effect of OEM is to be provided by supplier while exact mentioning of ISO classification and own country (in case of Western EU) standards, at the time of supply/delivery of the equipment at NSD.

ACCEPTANCE/INSPECTION CRITERIA a.

The equipment will not be acceptable in case of the following: (1) Equipment specifications are not as per Annex ‘A’. (2) List of Spares/Consumables required for maintenance / operation for 01 year at clause 6 of Annex ‘A’ are not provided. (3) Documentation at clause 5 (a to d) of Annex ‘B’ not provided. (4) Clause 6 (a to e) “Certification Requirement” at Annex ‘B’ are not met. (5) Commissioning is not completed to the satisfaction of end user in accordance with OEM approved/recommended procedures (As mutually agreed). (6) Confirmation of performances and functions is not same as given in the contract and relevant documentation/manuals.

b. Additionally supplier is to provide OEMs certified acceptance criteria for testing of the equipment within 02 months after signing of the contract. c. PN will evaluate the supplied acceptance criteria & amend it as per its experiences as regards to operation & maintenance of equipment within 60 days of receipt of this criteria.

d. The final acceptance certificate will be signed by PN within 01 week only after successful completion of all acceptance trials to the entire satisfaction of PN. INSTALLATION/COMMISSIONING

10.

Commissioning and STW of the equipment is to be arranged within 30 days of supply of equipment by the supplier through OEM or their authorized rep(s) at NPEC. SOURCE OF SUPPLY: a. Supplier in his “Offer/Quotation” is to clearly state whether equipment will be supplied directly from relevant OEM or OEM’s authorized dealer/agent/stockist. b. In case the equipment is being sourced through OEM’s Authorized Dealer/Agent/Stockist, a documentary proof to this effect comprising OEM’s Dealership Certificate in respect of Dealer/Agent/Stockist is to be provided by the supplier with following endorsements:

11.

(1) Certificate reference number with date.d (2) Name of the authorized dealer/agent/stockist. (3) Last date/duration/period for validity of dealership. PRICE OF ALL DELIVERABLES a. In his quotation the supplier should separately mention the price as per following format:

S. No (1) (2) (3) (4)

12. 13.

Description Complete equipment Operator manual Maintenance manual Depot list

Price

b. DP (N) is requested to ensure that commercial offer clearly indicates above listed prices. TSR Technical scrutiny of quotations forwarded by the bidders will be carried out. BUY BACK The seller will buy back the spare parts supplied as part of this contract at the selling price, which are no longer required as indicated by the Buyer, within 05 years from the final acceptance of the equipment/system.

DP-3 Tender No……………

Name of the Firm……………… DGDP Registration No……….. Address………………………… Date…………………………….. Telephone No. ………………… Official E-Mail………………….. Fax No …………………….…… Mobile No of contact person…..

To: THE DIRECTOR OF PROCUREMENT (Section P-3..) Ministry of Defence Production Sectt. No. II, Adamjee Road RAWALPINDI Tel: 051-9271468-78 Dear Sir 1. I/We hereby offer to supply to the Director of Procurement (Navy) the stores detailed in schedule to the tender inquiry or such portion thereof as you may specify in the acceptance of tender at the prices offered against the said schedule and further agree that this offer will remain valid up to 120 days and will not be withdrawn or altered in terms of rates quoted and the conditions already stated therein or on before this date. I/we shall be bound by a communication of acceptance to be dispatched within the prescribed time. 2. I/We have understood the Instructions to Tenders and General Conditions Governing Contract in Form No. DP-35 (Revised 2002) included in the pamphlet entitled, Government of Pakistan, Ministry of Defence (Directorate General Defence Purchase) “General Conditions Governing Contracts” and have thoroughly examined the specifications/drawings and/ or patterns quoted in the schedule hereto and am/are fully aware of the nature of the stores required and my/our offer is to supply stores strictly in accordance with the requirements. 3. The following pages have been added to and form part of this tender: a. ………………………………………. Yours faithfully, ………………………………… (Signature of Tenderer) ……………………………………. (Capacity in which signing) Address:……………………………….. Date………………………………. Signature of Witness…………… ADDRESS………………………………….. *Individual signing tender and/or other documents connected with a contract must specify:-

(a) (b) (c) (d)

Whether signing as “Sole Proprietor” of the firm or his attorney. Whether signing as a “Registered Active Partner” of the firm or his attorney. Whether signing for the firm “per procuration”. In the case of companies and firms registered under the Act, 1913 as amended up-to-date and under the Partnership Act 1932, the capacity in which signing e.g., the Director, Secretary, Manager, Partner, etc. or their attorney and produce copy of document empowering him so to sign, if called upon to do so.

(e) (f) (g)

Principal’s proforma invoice (in original) Earnest money Treasury Challan Form for tender Fees as applicable

DPL â&#x20AC;&#x201C; 15 WARRANTY M/S ___________________________________________________________________

CONTRACT NO. ________________________________________________ 1. We hereby guarantee that the articles supplied under the terms of this contract are produced new in conformance with approved drawings/specification and in all respect in accordance with the terms of the contract, and the materials used whether or not of our manufacture are in accordance with the latest appropriate standard specifications, as also in accordance with the terms of complete of good workmanship throughout and that we will repair/replace free of cost (FOB/CIF/FOR/C&F) Karachi as the case may be every article or part thereof which before use or in use shall be found defective or not within the limits and tolerance of specifications requirement or in any way not in accordance with the terms of the contract. 2. In case of our failure to replace the defective stores free of cost within three months of reporting by the consignee, we will refund the relevant cost (FOB/CIF/FOR/C&F/DDU) Karachi as the case may be in the currency/currencies in which received plus freight charges, upto consignees end and the purchaser shall have the right to purchase the stores declared defective at our risk and expense from elsewhere. 3.

The Supplier also undertakes to make good the deficiency in supply if any.

4. This warranty will remain valid for 01 year after acceptance of system by Pakistan Navy end user.

THE

SIGNATURE MUST BE THE SAME AS

THAT ON THE TENDER/CONTRACT, OR IF

OTHERWISE MUST BE SHOWN TO BE THE SIGNATURE OF A PERSON CAPABLE OF GIVING A GUARANTEE ON BEHALF OF THE

SUPPLIER/PRINCIPAL.

SIGNATURE : __________________ DATE

: _______________

NECESSARY DATA FOR ISSUANCE OF CONTRACTS ON EARNEST MONEY IMPORTANT Each column must be filled in with BLOCK CAPITAL LETTERS, incompletion shall render disqualification.

Name : _____________________________________

Father’s Name : ______________________________

Address (Residential) _____________________________________________________

__________________________________________________________ _________________________________________________________ 4.

Designation in Firm _______________________________________________________

CNIC : _____________________________________ (Attach Copy of CNIC) 6. NTN : ______________________________________ (Attach Copy of NTN) 7. Firm’s Address __________________________________________________________

___________________________________________________________ ___________________________________________________________ 8. Date of Establishment of Firm : ________________________________________________ 9. Firm’s Registration Certificate with FBR/Chamber of Commerce/Registrar of Companies. (Attach Copy of relevant CERTIFICATE) 10. In case PARTNERSHIP (Attach particulars at serial 1,2,3,4,5 and 6 of each partner).

(Kindly fill in the above form and forward it under your own letter head with contact details)

RE: TENDER NOTICE #SLIC/BWP/P&GS/09/2012 PURCHASE OF FURNITURE FOR BAHAWALPUR ZONE;

Date:10.09.2012

State Life Insurance Corp. of Pakistan invites sealed quotation for the purchase of following item with the specification given accordingly from the reputed Firms/Suppliers/Distributors who are registered with Sales Tax and National Income Tax. S.No 01

Items to Purchase Conference Chairs (Cushioned)

Specification Executive quality/ modern standard / Design available in Zonal Head office.

Quantity 60

TERMS AND CONDITIONS: 1.

Security amount must be deposited equal to 02% of the approximate value (note above) of the tender in form of â&#x20AC;&#x153;Call Deposit receiptâ&#x20AC;? in favour of the State Life Insurance Corporation of Pakistan Zonal Office Bahawalpur which will be refunded to the un-successful parties on the spot and the refundable cash payment of CDR will be detained of the successful parties till the completion of job as per quotation/purchase order. No quotation will be acceptable without earnest money. Tenders must be accompanied by a Tender Security in the amount mentioned above and must be delivered to Secretary- (P&GS) State Life Insurance Corporation of Pakistan, Bahawalpur Zone, Barq Poly Clinic building 1st & 2nd Floor Ahmedpur Road, Bahawalpur on or before 27th September 2012 11:30 Am, mentioned date & time. Tenders will be opened on the same date/day as mentioned at 12:30 PM. in the presence of Tenders representative who choose to attend. 2. On finding sub-standard quality as and when noticed during process, the deposit security may be forfeited in favour of the Corporation.

3.The Firms/ Suppliers / Distributors in question will be bound to supply the required items as whole consignment within 25 days from the issuance date of supply order. 4.

The bidders will attach their respective copies of NTN and Sales Tax Certificates. Order will be placed to Quotationers on the lowest items rates.

Sealed Quotation duly completed in all respects must be reached to the undersigned by Courier Service and by Registered Mail during the office hours i.e 8:30 am to 5:00 pm (sharp) expect Saturday & Sunday till closing date (27.09.2012) .

The Income Tax will be deducted @ 3.5 % at source or as per Govt. of Pakistan Law.

Cont/page

The Corporation reserves the right to cancel/reject any one or all the Tenders in accordance with rule (33) of PPRA.

Payments will be released after supplying the above said items and after checking quality etc.

Required order/quantity may be reduced in accordance with the available budget and rate given in the quotation. (Note: The valued more than two million is not available).

For further details or any clarification the undersigned and dealing officer may be contacted during working hours in person or telephonically on phone # 062-9255363/9239183

Mirza Asad Saeed Atif Secretary Zonal Procurement Committee BAHAWALPUR ZONE.

Air University Federally Chartered Public Sector University Tender Notice for Procurement of Furniture Tender No: IBD/AU/6/12 Air University Islamabad invites sealed tender, based on Single Stage Two Envelopes bid procedure, from reputed firms, for supply of following furniture items:-

S.No

Description

Qty

Books & Files Almirah

08 Nos

Revolving Chairs

08 Nos

Visiting Chairs

20 Nos

Office Table with 5mm brown tinted glass on top

08 Nos

Computer Table

08 Nos

TERMS AND CONDITIONS (i)

Firms holding valid registration with any Government Department can submit their bid. The bidders are to furnish the following details with tender documents: • • • •

(ii) (iii) (iv) (v) (vi) (vii) (viii) (ix)

Bank statement of the firm for the last six months. Description and value of each supply, related to the bid, completed since 1st July, 2010. Description and value of each ongoing provision relevant to the bid. Affidavit that firm has never been black listed nor indulged in litigation with any Government Department/Civil Agency.

Tender documents can be obtained from Project Director Office wef 15 Sept, 2012 on any working day (Except Saturday), by depositing cash Rs. 300/- (non refundable). The bidders are invited to see the furniture samples during 0830 Hrs to 1630 Hrs on any working day (Except Saturday). Bidders are to submit their Technical and Financial Proposals clearly marked and sealed in separate envelopes. Sealed Tenders, alongwith 2% call deposit addressed to Project Director, are to reach by 1200 hours on 03 Oct, 2012. Technical proposals will be opened in the Project Director office at 1230 hours, on the last day of their submission, in the presence of bidders/their reps who choose to attend. The offer must be valid for at least 30 days from the date of tender opening. Taxes (where applicable) will be deducted as per Government Rules. Air University reserves the right to accept any and/or reject any or all the bids. Project Director Air University Sector E-9, Islamabad Tel No:051- 9263207

COVERING SHEET

I/we M/s ________________________________ do herby affirm to adhere to the necessary instructions for participation in the procurement process. All the columns of DP-I, II and III are filled, signed and stamped as per requirement. Data Sheet (for unregistered firms only) is attached dully filled in all respects.

Yours truly, _________________ Signature of Tenderer _________________ Complete Name Seal/Stamp of Firm

_________________ Capacity in which Signing _________________ Date

Contact Numbers Assistant Directors Procurement DP(Navy) ADP-34

051-9271474

Invitation to Tender and General Instructions

1. Conditions Governing Contracts. The ‘Contract’ made as result of this I/T shall mean the agreement entered into between the parties i.e. the ‘Purchaser’ and the ‘Seller’ on Directorate General Defence Purchase (DGDP) contract Form “DP-19” in accordance with the law of contract Act, 1872 and those contained in Defence Purchase Procedure (DP-35) and other special conditions that may be added to given contract for the supply of Defence Stores specified herein.

Understood agreed

Understood not agreed

Understood agreed

Understood not agreed

Understood agreed

Understood not agreed

Understood agreed

Understood not agreed

Understood agreed

Understood not agreed

2. Delivery of Tender. The offer is to be submitted in duplicate as under:a. Commercial Offer. The offer will be in duplicate and indicate prices quoted in figures as well as in words alongwith essential literature/brochure. It should be clearly marked in fact on the envelope “Commercial Offer”, tender number and date of opening. Taxes, duties, freight/transportation, insurance charges etc are to be indicated separately. Total price of the items quoted against the tender is to be clearly mentioned.

b. Technical Offer: (Where Applicable). Should contain all relevant specifications in triplicate alongwith essential literature/brochure and drawings in an envelope and clearly marked “Technical Offer” without prices, tender number and date of opening. c. Special Instructions. Tender documents and its conditions may please be read point by point and understood properly before quoting. All tender conditions should be responded clearly. In case of any deviation due to non-acceptance of tender conditions(s), the same should be highlighted alongwith your changed offer/conditions. Tender may however be liable to be rejected. d. Firms shall submit their offers in two separate envelopes (i.e. two copies of commercial offer and two or more copies of the technical offer as asked in the IT). The commercial offer will include rates of

items/services called for and the technical offer will not indicate the rates. Both types of offers are to be enclosed in separate covers and each envelope shall be properly sealed bearing the signature of the bidder. Each cover shall indicate type of offer, number and date of IT and IT opening date. Thereafter both the envelopes (technical and commercial offer) shall be placed in one envelope (second cover) duly sealed and signed. This cover should bear the address of the procurement agency indicating, issuance date of IT and No, with its opening date. This should be further placed in another cover (third cover), addressed as indicated in the tender documents, without any indication that there is a tender within it. e.

The tender duly sealed will be addressed to the following:Directorate of Procurement (Navy)/P-3... At Ministry of Defence Production Building Secretariat No. II, Adamjee Road Rawalpindi, PAKISTAN Telephone: 92-051-9271468-78 Fax No. 92-051-5516307 E-Mail: dpnrwp2007@gmail.com dpnavy@paknavy.gov.pk

3. Date and Time For Receipt of Tender. Tender must reach this office by the date and time specified in the Schedule to Tender (Form DP-2) attached. This Directorate will not accept any excuse of delay occurring in post. Tenders received after the appointed/ fixed time will NOT be entertained. The appointed time will, however, fall on next working day in case of closed/forced holiday. Only legitimate/registered representatives of firm will be allowed to attend tender opening. 4. Tender Opening. Tenders will be opened as mentioned in the schedule to tender. Commercial offers will be opened at later stage if Technical Offer is found acceptable on examination by technical authorities of Service HQ. Date and time for opening of Commercial offer shall be intimated later. Only legitimate / registered representative of firm will be allowed to attend tender opening. 5.

Understood agreed

Understood not agreed

Understood agreed

Understood not agreed

Understood agreed

Understood not agreed

Understood agreed

Understood not agreed

Validity of Offer. a. The validity period of quotations must be indicated and should invariably be 90 days extendable to 120 days from the date of opening of Tender. Conversion rate of FE/LC components will be considered w.e.f. opening of commercial offer. b. The quoting firm will certify that in case of an additional requirement of the contract items (s) in any qty(s) with in a period of 12 month from the date of signing the contract, these will also be supplied ( at the on going contract rates) with discount.

6. Part Bid. Firm may quote for the whole or any portion, or to state in the tender that the rate quoted, shall apply only if the entire

quantity is taken from the firm. The Director Procurement reserves the right of accepting the whole or any part of the tender or portion of the quantity offered, and firm shall supply these at the rate quoted. 7. Quoting of Rates. Only one rate will be quoted for entire quantity, item wise. 8. Return of I/T. In case you are Not quoting, please return the tender inquiry stating the reason of NOT quoting. In case of failure to return the ITs either quoted or not quoted consequently on three occasions, this Directorate, in the interest of economy, will consider the exclusion of your firm’s name from our future distribution list of invitation to tender. 9. Withdrawal of Offer. Firms shall not withdraw their commercial offers before signing of the contract and within validity period of their offers. In case the firm withdraws its offer within validity period and before signing of the contract, Earnest Money of the firm shall be confiscated and disciplinary action may also be initiated for embargo up to 01 year. 10. Provision of Documents in case of Contract. In case any firm wins a contract, it will deposit following documents before award of contract:

Understood agreed

Understood not agreed

Understood agreed

Understood not agreed

Understood agreed

Understood not agreed

Understood agreed

Understood not agreed

a. A copy of letter showing firm’s financial capability. b. Foreign Seller has to provide its Registration Number issued by respective Department of Commerce authorizing export of subject stores. c. Principal/Agency Agreement. 11.

Treasury Challan. a. Offers must be accompanied with a challan form of Rs. 200/(obtainable from State Bank of Pakistan/Government Treasury) and debitable to Major Head XL VII, Main Head XII, Sub Head ‘A’ Miscellaneous Code No Def – 1220. Each offer will be covered by one challan.

Attached

Not Attached

Understood agreed

Understood not agreed

Understood agreed

Understood not agreed

b. In case of un-registered firms, whether they have applied for registration or not, will pay tender inquiry fee (Challan Form) of Rs. 300/-.

12. Inspection Authority. CINS, Joint Inspection will be carried out by INS, Consignee & Specialist User or a team nominated by Pakistan Navy. CINS inspection shall be as prescribed in DP-35 and PP & I (Revised 2002) or as per terms of the contract.

Not Attached

13. Condition of Stores. Brand new stores will be accepted on Firm’s Warranty/Guarantee Form DPL-15. Copy of DPL-15 can be obtained from DP(N) on e-mail address given on page 1.

14. Marking. Marking Spec/Misc/NS/002/80.

15. Documents Required. submitted along with the quote:

stores

accordance

with

Following documents are required to be

Understood agreed

Understood not agreed

a. OEM/Authorized Dealer/Agent Certificate along with OEM Dealership Evidence. b. The firm/supplier shall provide correct and valid e-mail and Fax No to CINS and DP(N). Supplier/contracting firm shall either provide OEM Conformance Certificate to CINS or is to be e-mailed to CINS under intimation to DP (Navy). Hard copy of COC must follow in any case through courier. On receipt, CINS shall approach the OEM for verification of Conformance Certificates issued by OEM. Companies/firms rendering false OEM Conforming Certificates will be blacklisted. c.

Original quotation/proforma invoice.

Submit breakup of cost of stores/services on the following lines: (1) Imported material with break down item wise along-with import duties. (2) Variable business overheads like taxes and duties imposed by the federal/provincial government as applicable:(i) General Sales Tax (ii) Income Tax (iii) Custom Duty. PCT code along with photocopy of the related page is to be attached where applicable. (iv) Any other tax/duty. (3) Fixed overhead charges like labour, electricity etc. (4) Agent commission/profit, if any. (5) Any other expenditure/cost/service/remuneration as asked for in the tender.

16. Rejection of Stores/Services. The stores/services offered as a result of contract concluded against this tender may be rejected as follows: a. 1st rejection on Govt. expense b. 2nd rejection on supplier expense c. 3rd rejection contract cancellation will be initiated. 17. Security Deposit/Bank Guarantee . To ensure timely and correct supply of stores the firm will furnish an unconditional Bank Guarantee(BG) from a schedule Bank for an amount upto 10 % of the contract value (excluding Taxes, duties/freight handling charges) on a Judicial Stamp Paper of the value of (Rs 100.00) as per prescribed format or in shape of CSD/Bank draft. The Bank Guarantee shall be endorsed in favour of CMA(DP)

Understood agreed

Understood not agreed

Rawalpindi who is the Accounts Officer specified in the contract. The CMA(DP) Rawalpindi have the like power of seeking encashment of the Bank Guarantee as if the same has been demanded by the purchaser himself. The Bank Guarantee shall be produced by the supplier within 30 days from the date of issue of the contract and remain valid for upto 60 days after completion of warranty period and remain in force till one year ahead of the delivery date given in the contract. If delivery period is extended, the supplier shall arrange the extension of Bank Guarantee within 30 days after the original delivery period to keep its validity always one year ahead of the extended delivery period. The BG form can be obtained from DP(N) on e-mail address given on page 1. 18. Integrity Pact. Procurements exceeding Rs 10 Million shall be subject to an integrity pact, between the procuring agency and the suppliers or contractors. The form is available at www.ppra.org.pk or can be requested at dpnrwp2007@gmail.com.

Understood agreed

Understood not agreed

19. Correspondence. All correspondence will be addressed to the Purchaser. Correspondence with regard to payment or issue of delivery receipt may be addressed to CMA Rawalpindi & Consignee respectively with copy endorsed to the purchaser.

Understood agreed

Understood not agreed

20. Pre-shipment Inspection. PN may send a team of officers including DP(N) member for the inspection of major equipments and machinery items at OEM premises as per terms of contract.

Understood agreed

Understood not agreed

Understood agreed

Understood not agreed

Understood agreed

Understood not agreed

Understood agreed

Understood not agreed

21. Amendment to Contract. Contract may be amended/modified to include fresh clause (s) modify the existing clauses with the mutual agreement by the supplier and the purchaser; such modification shall form an integral part of the contract. 22. Discrepancy. The consignee will render a discrepancy report to all concerned within 60 days after receipt of stores for discrepancies found in the consignment. The quantities found short are to be made good by the supplier, free of cost. 23.

Price Variation. a.

Prices offered against this tender are to be firm and final.

b. Where the prices of the contracted stores/raw material are controlled by the government or an agency competent to do so on government behalf then price increase/decrease will be allowed at actual on case to case basis on production of government notification by the Supplier for the subject stores where the firms are contractually obliged and bound to produce the stores from raw materials supplied by government/State controlled departments in consultation with Military Finance. c. Except for calculation or typographical errors, the rates of the contracts not having a price variation clause PVC clause will not be increased subsequently. But when such an increase is considered desirable in the interest of expeditious supply of

stores and is necessitated by the circumstances beyond the control of the Supplier, the case may be decided accordingly. 24. Price Reduction (PR). In case the stores on inspection are found to be below the stipulated specification and these are proposed to be accepted by the inspector under deviation subject to be certain price reduction, the relevant Inspection Note may be released and stores dispatched to the consignee with the following endorsement on the Inspection Note:

Understood agreed

Understood not agreed

Understood agreed

Understood not agreed

â&#x20AC;&#x153;Accepted under deviation with certain price reduction, as recommended on deviation form, which is subject to final approval/decision by the Purchaserâ&#x20AC;? The supplier will not submit the bills unless price reduction aspect is finally decided upon by the purchaser and formal amendment to this effect is issued in the contract. 25. Buy back. The seller will buy back the spares/items supplied as a part of this tender at the selling price, which are no longer required as indicated by the buyer with in five years from the final acceptance of the spares/items. 26. Force Majeure. The supplier will not be held responsible for any delay occurring in supply of equipment due to event of Force Majeure such as acts of God, War, Civil commotion, Strike, Lockouts, Act of Foreign Government and its agencies and disturbance directly affecting the supplier over which events or circumstances the supplier has no control. In such an event the supplier shall inform the purchaser within 15 days of the happening and within the same timeframe about the discontinuation of such circumstances/happening in writing. Non-availability of raw material for the manufacture of stores, or of export permit for the contracted stores from the country of its origin, shall not constitute Force Majeure. 27. Arbitration. All matters of dispute or difference regarding rejection of stores by the inspector or cancellation of the contract by the Purchaser, arising out of the contract finalized between the parties thereto, the settlement of which is not otherwise specially provided for in the contract, shall be referred to arbitration as under: a.

Understood agreed

Understood not agreed

The settlement of b. Indigenous (FOR etc) Contracts. dispute, is not otherwise specially provided for in the contract, through arbitration clause in the contract shall be referred to the decision of Secretary, Ministry of Defence (DP Division). His decision shall be final and binding on both the parties. Work under the contract shall if reasonably possible continue, under the proceedings before the said Secretary and no payments payable by the Director shall be withheld on the account of such proceeding unless they are subject of the dispute.

Understood agreed

Understood not agreed

28. Court of Jurisdiction. In case of any dispute only court of jurisdiction at Rawalpindi shall have jurisdiction to decide the matter. 29. Liquidated Damages(LD). Liquidated Damages upto 2% per month are liable to be imposed on the suppliers by the purchaser in accordance with DP-35, if the stores supplied after the expiry of the delivery date without any valid reasons. Total value of LD shall not exceed 10% of the contract value.

Understood Understood agreed agreed Understood notUnderstood agreed not agreed

30. Risk Purchase. In the event of failure on the part of supplier to comply with the contractual obligations the contract will be cancelled at the Risk and Expense of the supplier in accordance with DP-35. 31. Penalty. In case of wrong supply of the item or any breach of the contractual terms & conditions by the supplier, a penalty may be imposed by DP(N). 32 COMPENSATION BREACH OF CONTRACT. If the contractor fails to supply the contracted stores or contract is cancelled either on RE or without RE or contract become ineffective due to default of supplier / seller or stores / equipment declared defective and caused loss to the Government, contractor shall be liable to pay to the Government compensation for loss or inconvenience resulting for his default or from the rescission of his contract when such default or rescission take place such compensation will be in excess to the RE amount, if imposed by the competent authority. Compensation amount in terms of money will be decided by the purchase officer and will be deposited by contractor / seller in Government treasury in the currency of contract.

33. Gratuities/Commission/Gifts. No commission, rebate, bonus, fee or compensation in any form shall be paid to any local or foreign agent, consultant representative, sales promoter or any intermediary by the Manufacturer/Supplier except the agent commission payable as per the agent commission policy of the government and as amended from time to time and given in the contract. Any breach of such clause(s) of the contract by Manufacturer/Supplier and/or their sole nominated representative may result in cancellation of the contract blacklisting of the Manufacturer/Supplier financial penalties and all or any other punitive measure which the purchaser may consider appropriate. 34.

Termination of Contract.

Understood agreed

Understood not agreed

a. If at any time during the currency of the contract the Purchaser decides to terminate the contract for any reason whatsoever (other than for reasons of Non-Delivery) he shall have right to do so by giving the Supplier a registered notice to that effect. In that event the Purchaser will accept delivery at the contract price and terms of such stores/goods/services which are in the actual process of manufacture that is completed and ready for delivery within thirty days after receipt by the Supplier of such notice. b. In the case of remainder of the stores/goods/services the Purchaser may elect either:

Understood agreed

Understood not agreed

undelivered

(1). To have any part thereof completed and take the delivery thereof at the contract price or. (2). To cancel the remaining quantity and pay to the Supplier for the articles or sub-components or raw materials purchased by the Supplier and are in the actual process of manufacture at the price to be determined by the Purchaser. In such a case materials in the process of manufacture shall be delivered by the Supplier to the Purchaser. (3). No payment shall however be made for any materials not yet in the actual process of manufacture on the date notice of cancellation is received. c. Should the Supplier fail to deliver goods/services in time as per quality terms of contract or fail to render Bank Guarantee within the stipulated time period or any breach of the contract the Purchaser reserves the right to terminate/cancel the contract fully or any part thereof at the risk and expense (RE) of the Supplier. 35. Rights Reserved. Directorate of Procurement (Navy), Rawalpindi reserves full rights to accept or reject any or all offers including the lowest, by giving the reasons in writing to the participants. 36. Application of Official Secrets Act, 1923. All the matters connected with this enquiry and subsequent actions arising there from come within the scope of the Official Secrets Act, 1923. You are, therefore, requested to ensure complete secrecy regarding documents and stores concerned with the enquiry and to limit the number of your employees having access to this information. 37. Acknowledgment. Firms will send acknowledgement slips within 07 days from the date of downloading of IT from the PPRA Website i.e. www.ppra.org.pk 38.

Disqualification. Offers are liable to be rejected if:a. b.

Received later than appointed/fixed date and time. Offers are found conditional or incomplete in any respect.

Understood agreed

Understood not agreed

Understood agreed

Understood not agreed

Understood agreed

Understood not agreed

Understood agreed

Understood not agreed

c. There is any deviation from the General /Special/Technical Instructions contained in this tender. d. Forms DP-1, DP-2,and DP-3 duly signed, are NOT received with the offers. d. Taxes and duties, freight/transportation and insurance charges NOT indicated separately as per required price breakdown mentioned at Para 17. e. Treasury challan is NOT attached with the offer. f. Multiple rates are quoted against one item. g. Manufacturer’s relevant brochures and technical details on major equipment assemblies are not attached in support of specifications. j. Subject to restriction of export license. k. Offers (commercial/technical) containing non-initialed/ unauthenticated amendments/corrections/overwriting. l. If the validity of the agency agreement is expired. m. The commercial offer against FOB/CIF/C&F tender is quoted in local currency and vise versa. n. Principals invoice in duplicate clearly indicating whether prices quoted are inclusive or exclusive of the agent commission is not enclosed. p. Earnest money is not provided. q. If validity of offer is not quoted as required in IT or made subject to confirmation later. r. Offer made through Fax/E-mail/Cable/Telex. s. If offer is found to be based on cartel action in connivance with other sources/ participants of the tender. t. If OEM and principal name and complete address is not mentioned. 39.

The above terms and conditions are confirmed in total for acceptance.

(Signatures of Tenderer) ……………………………. (Capacity in which signing)

D P 2 I N V I T A T I O N

T O

T E N D E R

F O R M

1. Schedule to Tender No CICP/E/IND/210002/R-1208/340067 dated 12-9-12. This tender will be closed for acceptance at 1030 Hours and will be opened at 1100 Hours on 25-10-12. Please drop tender in the Tender Box No 204. 2. You are requested to please use this Performa for price quotation, fill in the prices, affix your stamp on the same, sign it and forward it in original as your Commercial offer along with the covering letter of your firm. If you do not use this form as price quotations your offer might be rejected. 3. You are requested to please attach DP-1 and DP-3 alongwith your quotation duly signed & stamped. Same can be requested from DP (N) at Emaildpnavy@paknavy.gov.pk

0S NO

DETAIL OF STORES

NSN NO. 0421-50-000-0011 BED IRON STEEL HOSPITAL ALONGWITH DRIP STAND ROD & ADJUST

QTY/ UNIT

UNIT PRICE

70 NO

LENGTH : 7 FEET 1-1/2 INCH BREADTH: 3 FEET HEIGHT

: 3 FEET & 9 INCH

SPECIFICATION 1. BS 4886-PART 1 OF 1973 (EXCEPT CLAUSE 9,10 & 13) 2. ADVANCE SAMPLE TO BE APPROVED BY CINS & PNS SHIFA. 3. DETAILS SPECIFICATION ATTACHED AS PER ANNEX A. Above mentioned price includes 16% sale Tax (Please tick Yes or No) Yes

Grand Total Earnest Money 1. Registered/Indexed with DGDP: 02% of quoted value only. 2. Registered with DGDP But Un-Indexed: 03% of quoted value only. 3. Un-Registered with DGDP: 05% of quoted value only.

TOTAL PRICE

Terms & Conditions 1.

Special Instructions.

N/A.

Terms of Payment.

100% on delivery of stores and issuance of CRV.

Origin of Stores.

Indigenous

Origin of OEM.

Local.

Technical Scrutiny Report.

Delivery Period.

4-6 MONTHS.

Currency.

Pak Rupees

Basis for acceptance.

Bid validity.

10.

Tendering procedure Two Stage- Two procedure will be followed. PPRA Rule 36(6).

Required.

FOR. At least 90 Days, extendable to 120 Days. Envelop

bidding

11. Earnest Money/Tender/Bid Bond: your tender must be accompanied by a Bank Draft in favour of CMA (DP), Rawalpindi for the following amount: a.

Registered/Indexed Firms: 2% of the quoted value subject to maximum celling of Rs 0.200 Million. Applicable for FOR/FOB cases only.

Registered but Un-indexed Firms: 3% of the quoted value subject to maximum celling of Rs 0.50 Million. Applicable for both FOR/FOB cases.

Un-registered/Un-indexed Firms: 5 % of the quoted value subject to maximum ceiling of Rs 1.00 Million. Applicable for both FOR/FOB cases. Note:

12.

(1) Please delete above mentioned condition not relevant to the firm. (2) In case of firm wins a contract on EM, it will deposit following documents for provisional Regn before the award of contracts:

Return of Earnest Money. a. The offers alongwith Earnest Money of the firms not qualified during technical scrutiny shall be returned within 03 days of receipt of TSR. b. Earnest Money of the unsuccessful bidders other than the first three lowest quotes shall be returned instantly on the next day of commercial opening.

c. Earnest Money of the second & third lowest quotes will be returned on signing of the contract with the first lowest quote (Para 32 (b) of DP-35 refers). d. Earnest Money of the first lowest firm will be returned after the finalization of the contract, once the firm has provided the Bank Guarantee. (Para 32 (c) of DP-35 refers). 13.

Special Note. a. All Participating firms must submit technical offers in duplicate (one for TSR committee and one for DP (Navy) record). b. Unregistered (Not registered with Directorate General Defense Purchase) firms must provide the documentary evidence of their financial capability to undertake the project. c. Unregistered firms are to submit a certificate along with their Technical offer stating that the firm is not black listed by any government organization and not under disciplinary trial or embargo. d. In case of Pakistani firms, sales tax, NTN and income tax registration certificates are to be attached with the offer. These certificates are mandatory with the BID, otherwise offer shall be REJECTED. e.

Company registration certificates are to be attached with offer.

f. Requisite amount of earnest money (in shape of Bank Draft in the favour of CMA (DP)) is to be attached in separate envelop in sealed condition with the Technical offer. Photocopy of the same shall also be attached with DP-2 as a testimony. Cheques/crossed cheques shall not be accepted. g. Duly completed Form DP-1 and DP-3 are to be attached with Technical Offer. h. DP-2 Form shall also be submitted with Technical Offer without mentioning of prices. Note: In case of failure to comply above instructions, Terms and conditions, offer will liable for rejection.

ANNEX ‘A’

SPECIFICATION OF BED IRON STEEL HOSPITAL a.

Main frame 16 G pipe, sub frame & foot side & head side Bow 18 SWG pipe.

Tilting system is required and should available in beds.

Two screw Cranks one for head side other for Foot side.

Fowler bed with two handles on both sides for tendelenburg and Reverse tendelenburg.

S.S Rod for I.V. Pole.

Urine Bag Hooks

Powder Paint in any one colour as international standard.

Detachable head side bow with dual side finished of laminated board.

Detachable foot side bow with dual side finished of laminated board.

Four castors of 5” with 2 casters with brake.

Provision of four IV sets is required, two on both sides of head end and two on

02 Nos

the foot end. Moreover the IV stand should be of adjustable with a screw. The Rod should be stainless steel material. m. All nuts, screws and locking system used should be of stainless steel material. n.

Safety sides are required on both side of all beds. These should be capable of being collapsed or lowered without removal from bed stead. When collapse should not hamper access to patient, bed making and nursing procedures. Collapsing of these sides should require minimum clearance between bed and its surroundings.

SIZE: Size of Beds: a. Length b. Breadth c. Height

86” 36” 45”

(7’ 2”) (3’) (3’ 9”)

DP-3 Tender No……………

To: THE DIRECTOR OF PROCUREMENT (Section P-34) Ministry of Defence Production Sectt. No. II, Adamjee Road RAWALPINDI Tel: 051-9271468-78 Dear Sir 1. I/We hereby offer to supply to the Director of Procurement (Navy) the stores detailed in schedule to the tender inquiry or such portion thereof as you may specify in the acceptance of tender at the prices offered against the said schedule and further agree that this offer will remain valid up to 120 days and will not be withdrawn or altered in terms of rates quoted and the conditions already stated therein or on before this date. I/we shall be bound by a communication of acceptance to be dispatched within the prescribed time. 2. I/We have understood the Instructions to Tenders and General Conditions Governing Contract in Form No. DP-35 (Revised 2002) included in the pamphlet entitled, Government of Pakistan, Ministry of Defence (Directorate General Defence Purchase) “General Conditions Governing Contracts” and have thoroughly examined the specifications/drawings and/ or patterns quoted in the schedule hereto and am/are fully aware of the nature of the stores required and my/our offer is to supply stores strictly in accordance with the requirements. 3. The following pages have been added to and form part of this tender: a. ………………………………………. b. ………………………………………. c. ……………………………………….. Yours faithfully, ………………………………… (Signature of Tenderer) ……………………………………. (Capacity in which signing) Address:……………………………….. Date………………………………. Signature of Witness…………… ADDRESS…………………………………..

*Individual signing tender and/or other documents connected with a contract must specify:(a) (b) (c) (d)

Whether signing as “Sole Proprietor” of the firm or his attorney. Whether signing as a “Registered Active Partner” of the firm or his attorney. Whether signing for the firm “per procuration”. In the case of companies and firms registered under the Act, 1913 as amended upto-date and under the Partnership Act 1932, the capacity in which signing e.g., the Director, Secretary, Manager, Partner, etc. or their attorney and produce copy of document empowering him so to sign, if called upon to do so.

(e) (f) (g)

Principal’s proforma invoice (in original) Earnest money Treasury Challan Form for tender Fees as applicable

NECESSARY DATA FOR ISSUANCE OF CONTRACTS ON EARNEST MONEY IMPORTANT Each column must be filled in with BLOCK CAPITAL LETTERS, incompletion shall render disqualification.

Name : _____________________________________

Father’s Name : ______________________________

Address (Residential) : _____________________________________________________ _______________________________________________________________________ _______________________________________________________________________

Designation in Firm : _______________________________________________________

CNIC : _____________________________________ (Attach Copy of CNIC) NTN : ______________________________________ (Attach Copy of NTN) Firm’s Address : __________________________________________________________

6. 7.

________________________________________________________________________ ________________________________________________________________________ 8. Date of Establishment of Firm : ________________________________________________ 9. Firm’s Registration Certificate with FBR/Chamber of Commerce/Registrar of Companies. (Attach Copy of relevant CERTIFICATE) 10. In case PARTNERSHIP (Attach particulars at serial 1,2,3,4,5 and 6 of each partner).

(Kindly fill in the above form and forward it under your own letter head with contact details)

SPECIFICATIONS FOR CIVIL WORK, HARD WARE, SANITARY AND ELECTRICAL ITEMS RELATED TO WORKS DEPARTMENT. S.No Description Specification Quantity Rate Amount Mark Civil items 1 Bricks 1 No 2000 nos. 2 Sand 500 cft 3 Crush ½” , 1-1/2” 500 cft 4 Cement Bestway or 50 bags equivalent Sanitary items 1 Bib cock Faisal/S.Asia 100 nos or equivalent 2 PVC pipe 4 in Royal PVC 50 links or equivalent 3 Shower Rods Faisal/ Athif 100 Nos Complete or equivalent Hard ware items 1 Wooden kari Soft wood 200 nos 8’x4”x3” 2 Wooden gaz Soft wood 200 nos 8’x2”x1/2” 3 Ceiling sheets Thermopore 200 nos (2’ x 2’) sheets & Jibsum (100 each) 4 Paint (Emulsion) Burger or 64 gallons equivalent 5 Paint (Distemper) Burger or 80 gallons equivalent 6 Paint (weather Burger or 30 gallons shield) equivalent 7 Lime Best Quality 50 bags 8 Robin Neil Best Quality 24 packets 9 Zinc Best Quality 15 kgs 10 Chalk Best Quality 15 kgs 11 Plaster of paris Best Quality 50 kgs 12 Brush 5 in Universal or 12 nos equivalent 13 Brush 3 in Universal or 12 nos equivalent 14 Turpentine oil Tiger or 30 gallons equivalent Electrical items 1 Power plug Hero or 50 nos equivalent 2 Light plug Hero or 50 nos equivalent 4 Fast Cable or 20 bundle Cable 3.29 equivalent

5 6 7 8

Fast Cable or equivalent Fast Cable or equivalent Fast Cable or equivalent

Cable 7.29 Cable 7.64 Cable 7.44

20 Bundle 20 Bundle 20 Bundle

Folding Ladder (Aluminum) 8’ & 12’

Best Quality (1 No each)

02 Nos

Drill Machine

Germany, England, USA made or equivalent

02 Nos

TENDER NOTICE

The University of Malakand invites sealed quotations from reputed firms registered with Sale Tax & Income Tax Department for the purchase of: 1) IP Based Cameras and installation (Re-advertised) 2) Furniture and Fixtures (Fresh Tender) for Botanical Garden and Herbarium. 3) Civil works, Sanitary, Hard ware and Electric items related to “Works Department.” Tender documents containing detail information, terms & conditions etc are available on the website of University of Malakand & PPRA. These can also be obtained from the office of the Secretary Purchase Committee on cash payment of Rs.1000/-or bank draft (Non refundable) for each category on any working day except Saturday & Sunday. Downloaded documents must also accompany the requisite tender fee and 2% as earnest money of the Total Quoted Value in the shape of CDR in favor of Dy. Director Finance University of Malakand. Tender proposals found without requisite 2% CDR will stand rejected. Intending supplier must send their Tender/Quotation along with soft copy by post/Courier Services to reach this office up to 10:30 A.M on or before 20/09/2012.Opening date, Time, Venue & other terms & conditions can be seen in the Tender documents. The competent authority reserves the right to accept or reject any or all the tenders/Quotations prior to the acceptance of a bid or proposals & can also increase or decrease the No. of items to be purchased. BAKHT WAHAB DEPUTY DIRECTOR FINANCE/ SECRETARY PURCHASE COMMITTEE UNIVERSITY OF MALAKAND PHONE#0945-761919 Also available on the Web: Site. www.uom.edu.pk& www.ppra.org.pk

TENDER DOCUMENTS FOR IP-BASED CAMERAS S.No Name of Item 1 Network IP Camera

5 6

NVR Software Power cable LCD Housing

Services

Specification

Quantity

01 01 01 01 01 job

FURNITURE AND FIXTURE FOR HERBARIUM BUILDING S#

Item

Specification

Qty

A. Furniture for Lecture Theater: 1.

Dice

4ft high x 2ft 6inch wide, 3ft 6inch Broad with stage inclination 450. Additional drawer for paper, inbuilt location for two pens and glass of water, with raised stage for Microphone. Material

Cost

Total

2. 3.

Chairs for Stage with Table Plastic Chairs

Glass/Wood. Elegant, Elaborate, carved, with cushion. Front table with elaborate edge carvings 08 chairs fixed in a row of 16ft 8inch to the theater stairs with 3 props (legs) base fixing cost included, colour red. (8x5=40 Nos) Suitable for 20x30 ft hall with 4 speakers fitted in case

6 5

Sound System small 5. Table for 2’x2’x3 ft high Multimedia B. Furniture & Fixture for Museum Halls

Office Table

Office Chair

5.5x3.5 ft. 2.5’ high, Wooden highly polished with in built three drawers, one CPU case and one Keyboard drawer. Revolving

Office Table

Office Chair

3.5x2.5 ft 2.5’ high, Wooden highly polished with in built one drawer, one CPU case and one Keyboard drawer. Revolving

Study Tables

8x3 ft. height 2ft 6inch with highly polished top

Study Chairs

Office Table

Office Chair

Wooden Racks

4x4 ft. divided into three rows and 8 compartments. Open faced highly polished durable. D. Furniture & Fixture for Laboratory:

Laboratory Tables Laboratory Tables Laboratory Tables Study Chairs

6x3ft, 2ft 6inch high, Wooden highly polished.

7x3ft, 2ft 6inch high, Wooden highly polished.

9x3ft, 2ft 6inch high, Wooden highly polished.

2. 3. 4.

3.5x2.5 ft 2.5ft high, Wooden highly polished with in built one drawer, one CPU case and one Keyboard drawer. Revolving

Office Table

Office Chair

5.5x3.5 ft. 2.5’ high Wooden highly polished with in built three drawers, one CPU case and one Keyboard drawer. Revolving

30 3

1 1

Open faced wooden Book Shelves Periodical Displayer Study Table

Study Chair

1ft 6inch wide, 1ft 6inch long, 1ft 6inch high and 1ft 6inch high back support with soft seating and back cushion F. Furniture for Office of Director & Curator 02 Rooms:

Executive Office Table Executive Office Chair Side Racks

Executive Class 5x4 ft. height 2.5 ft. wooden highly polished durable. Executive Class, revolving leather/ rexin coating.

2 12

2. 3. 4. 5.

Chair for visitors Side table

3ft broad x 7ft high x 1ft width. wooden single faced. 5 compartments

42” wide x18”broad x45”high. wooden single faced. 4 compartments 8x3ft, 2ft 6inch high wooden highly polished

4 2

G. Blinds and carpet 1.

Blinds Large

6ft 6inch x 5ft 6inch

Blinds Medium

3ft 6inch x 5ft 10inch

Blinds Small

2ft 7inch x 5ft 11inch

Carpet

Three pieces (i)14x14ft (ii)14x14ft (iii)31.5x20ft = (196+196+630 ft) Total

1022ft

SPECIFICATIONS FOR CIVIL WORK, HARD WARE, SANITARY AND ELECTRICAL ITEMS RELATED TO WORKS DEPARTMENT. S.No Description

1 2 3 4

Bricks Sand Crush Cement

1 2 3

Bib cock PVC pipe 4 in Shower Rods Complete

Wooden kari 8’x4”x3”

Rate

Amount

2 3

4 5 6

Wooden gaz 8’x2”x1/2” Ceiling sheets (2’ x 2’)

Soft wood

200 nos

Thermopore sheets & Jibsum (100 each) Burger Burger Burger

200 nos

7 8 9 10 11 12 13 14

Paint (Emulsion) Paint (Distemper) Paint (weather shield) Lime Robin Neil Zinc Chalk Plaster of paris Brush 5 in Brush 3 in Turpentine oil

1 2 4

Power plug Light plug Cable 3.29

Best Quality 50 bags Best Quality 24 packets Best Quality 15 kgs Best Quality 15 kgs Best Quality 50 kgs Universal 12 nos Universal 12 nos Tiger 30 gallons Electrical items Hero 50 nos Hero 50 nos Fast Cable 20 bundle

Cable 7.29

Fast Cable

20 Bundle

Cable 7.64

Fast Cable

20 Bundle

Cable 7.44 Folding Ladder (Aluminum) 8’ & 12’

Fast Cable

20 Bundle

9 Drill Machine

64 gallons 80 gallons 30 gallons

Best Quality (1 No each)

02 Nos

Germany, England, USA made

02 Nos -

Tender Document

PROCUREMENT OF FURNITURE AND AFTER SALES SERVICES FOR GOVERNMENT OF PUNJAB’S TECHNOLOGY INCUBATOR

Punjab Information Technology Board (PITB) 11th Floor, Arfa Software Technology Park (ASTP), 346-B, Ferozepur Road, Lahore, Pakistan Phone: (+ 92) (42) (35880062), Fax: (+92) (42) (99232123) URL: www.pitb.gov.pk

Table of Contents 1. Invitation to Bid ............................................................................................................. 6 2. Bidding Details (Instruction to Bidders) ........................................................................ 8 TERMS AND CONDITIONS OF THE TENDER ................................................................. 10 3. Definitions.................................................................................................................... 10 4. Headings and Titles...................................................................................................... 11 5. Notice ........................................................................................................................... 11 6. Tender Scope ............................................................................................................... 11 7. Tender Eligibility ......................................................................................................... 11 8. Tender Cost .................................................................................................................. 12 9. Joint Venture/Consortium ............................................................................................ 12 10. Examination of the Tender Document ......................................................................... 12 11. Clarification of the Tender Document ......................................................................... 12 12. Amendment of the Tender Document.......................................................................... 13 13. Preparation / Submission of Tender ............................................................................. 13 14. Tender Price ................................................................................................................. 16 15. Tender Security ............................................................................................................ 16 16. Tender Validity ............................................................................................................ 17 17. Modification / Withdrawal of the Tender .................................................................... 17 18. Opening of the Tender ................................................................................................. 17 19. Clarification of the Tender ........................................................................................... 17 20. Determination of Responsiveness of the Bid (Tender) ................................................ 17 21. PARAMETERS OF TECHNICAL EVALUATION CRITERIA ............................... 18 22. Correction of errors / Amendment of Tender .............................................................. 20 23. Rejection / Acceptance of the Tender .......................................................................... 20 24. Award Criteria ............................................................................................................. 21 25. Acceptance Letter (Letter of Intent) ............................................................................ 21 26. Performance Security ................................................................................................... 21 27. Redressal of grievances by the procuring agency ........................................................ 21 TERMS & CONDITIONS OF THE DRAFT CONTRACT ................................................... 23 28. Contract ........................................................................................................................ 27 29. Contract Documents and Information .......................................................................... 27 30. Contract Language ....................................................................................................... 27 31. Standards ...................................................................................................................... 27 32. Commercial Availability.............................................................................................. 27 33. Patent Right .................................................................................................................. 27 34. Execution Schedule ...................................................................................................... 27 35. Packing ......................................................................................................................... 27 Page 2 of 60

36. Insurance ...................................................................................................................... 28 37. Labeling ....................................................................................................................... 28 38. Delivery........................................................................................................................ 28 39. Installation and Implementation .................................................................................. 28 40. Site Preparation ............................................................................................................ 29 41. Spare Parts and Support ............................................................................................... 29 42. Inspection and Testing ................................................................................................. 29 43. Taking-Over Certificate ............................................................................................... 30 44. Warranty ...................................................................................................................... 30 45. Ownership of Goods and Replaced Components ........................................................ 31 46. Defects Liability Expiry Certificate ............................................................................. 31 47. Payment........................................................................................................................ 31 48. Price ............................................................................................................................. 31 49. Contract Amendment ................................................................................................... 31 50. Assignment / Subcontract ............................................................................................ 32 51. Extensions in time for performance of obligations under the Contract ....................... 32 52. Liquidated Damages .................................................................................................... 32 53. Blacklisting .................................................................................................................. 32 54. Forfeiture of Performance Security ............................................................................. 33 55. Termination for Default ............................................................................................... 33 56. Termination for Insolvency.......................................................................................... 33 57. Termination for Convenience ...................................................................................... 33 58. Force Majeure .............................................................................................................. 33 59. Dispute Resolution ....................................................................................................... 34 60. Statutes and Regulations .............................................................................................. 34 61. Taxes and Duties .......................................................................................................... 34 62. Contract Cost ............................................................................................................... 34 63. The Client..................................................................................................................... 34 64. Authorized Representative ........................................................................................... 35 65. Waiver .......................................................................................................................... 35 66. Training ........................................................................................................................ 35 67. Documentation ............................................................................................................. 35 68. Special Stipulations...................................................................................................... 35 Annexure-A.............................................................................................................................. 37 Annexure-B .............................................................................................................................. 49 Annexure-C .............................................................................................................................. 50 Annexure-D.............................................................................................................................. 51 Annexure-E .............................................................................................................................. 52 Page 3 of 60

Annexure-F .............................................................................................................................. 53 Annexure-G.............................................................................................................................. 55 Annexure-H.............................................................................................................................. 56 Annexure-I ............................................................................................................................... 57 Annexure-J ............................................................................................................................... 58 Annexure-K.............................................................................................................................. 60

Page 4 of 60

Important Note: Bidders must ensure that they submit all the required documents indicated in the Bidding Documents without fail. Bids received without, undertakings, valid documentary evidence, supporting documents and the manner for the various requirements mentioned in the Bidding Documents or test certificates are liable to be rejected at the initial stage itself. The data sheets, valid documentary evidences for the critical components as detailed hereinafter should be submitted by the Bidder for scrutiny. It is intimated that no objection shall be entertained regarding the terms and conditions of the Bidding Document at the later stages during tender process.

Applicability of Punjab Procurement Rules, 2009 This Bidding Process will be governed under Punjab Procurement Rules, 2009, as amended from time to time and instructions of the Government of the Punjab received during the completion of the project

Page 5 of 60

Invitation to Bid

1.1 PPRA Rules to be followed Punjab Procurement Rules 2009 will be strictly followed. These may be obtained from PPRA’s website: http://ppra.punjab.gov.pk/PublicPages/prorules1.aspx In this document, unless otherwise mentioned to the contrary, "Rule" means a Rule under the Punjab Procurement Rules 2009. 1.2 Mode of Advertisement(s)

As per Rule 12(1), this Tender is being placed online at PPRA's website, as well as being advertised in print media. As per Rule 12(3), this Tender is also placed online at the website of Purchaser. The bidding document carrying all details can be downloaded from PITB’s website http://www.pitb.gov.pk and from PPRA’s website www.ppra.punjab.gov.pk for information only. All prospective bidders are required to register themselves with the Procurement Assistant, PITB at above given address, collect a Challan Form to submit an amount Rs. 500/- in given head at State Bank of Pakistan or National Bank of Pakistan, the deposit slip must accompany the bids, elsewise the bid will stand rejected. 1.3 Type of Open Competitive Bidding

As per Rule 36(b), Single Stage - Two Envelope Procedure shall be followed. This is as follows: i.

The bid shall comprise of a single package containing two separate envelopes. Each envelope shall contain separately the financial proposal and the technical proposal;

ii.

The envelopes shall be marked as “FINANCIAL PROPOSAL” and “TECHNICAL PROPOSAL” in bold and legible letters to avoid confusion;

iii.

Initially, only the envelope marked “TECHNICAL PROPOSAL” shall be opened;

iv.

The envelope marked as “FINANCIAL PROPOSAL” shall be retained in the custody of the procuring agency without being opened;

The Purchaser shall evaluate the technical proposal in a manner prescribed in Section 7, 13, 20 and Annexure-A of this document, without reference to the price and reject any proposal which does not conform to the specified requirements as listed in said Sections.

vi.

During the technical evaluation no amendments in the technical proposal shall be permitted;

vii.

The financial proposals of technically qualified bidders shall be opened publicly at a time, date and venue announced and communicated to the bidders in advance;

Page 6 of 60

viii.

After the evaluation and approval of the technical proposal the procuring agency, shall at a time within the bid validity period, publicly open the financial proposals of the technically accepted and qualified bids only. The financial proposal of bids found technically non-responsive shall be returned un-opened to the respective bidders.

In accordance with these rules, interested companies (hereinafter referred to as â&#x20AC;&#x153;Biddersâ&#x20AC;?) applying for bids should submit two separate bids/envelopes for Financial Proposal and Technical Proposal.

Page 7 of 60

Bidding Details (Instruction to Bidders)

All bids must be accompanied by Tender Security (As per provisions on clause “Tender Security” of this document) in favor of “Punjab Information Technology Board”. The bids along with tender security, Tender Forms, Affidavits, etc., must be delivered into the Tender Box No.2, placed at reception of Punjab Information Technology Board, Lahore on or before 1500 hrs no later than 4th October, 2012. The Technical bids will be publicly opened lot wise in the Committee Room of Punjab Information Technology Board, 11th Floor, Arfa Software Technology Park, 346-B, Ferozepur Road, Lahore, on same date at 1600 hours. Queries of the Bidders (if any) for seeking clarifications regarding the specifications of the hardware must be received in writing to the Purchaser within five working days from the date of Tender advertisement. Any query received after five working days shall not be entertained. All queries shall be responded to within due time. PITB may host a Q&A session, if required, at PITB premises (11th Floor, Arfa Software Technology Park, 346-B, Ferozepur Road, Lahore). All Bidders shall be informed of the date and time in advance. The bidder must submit bids on the basis of complete lot or lots. Failure to meet this condition will cause disqualification of the bidder. The bidder shall submit bids which comply with the Bidding Document. Alternative bids will not be considered. The attention of bidders is drawn to the provisions of Clause on “Determination of Responsiveness of Bid” and “Rejection/Acceptance of the Bid”, for making their respective bids substantially responsive to the requirements of the Bidding Document. The Primary Contact & Secondary Contact for all correspondence in relation to this bid is as follows: Primary Contact Fasieh Mehta Senior Program Manager Email: fasiehmehta@pitb.gov.pk 11th Floor, Arfa Software Technology Park, 346-B, Ferozepur Road, Lahore, Pakistan. Secondary Contact Iftikhar Ahmed Khan Project Coordinator Email: iftikhar.khan@pitb.gov.pk 11th Floor, Arfa Software Technology Park, 346-B, Ferozepur Road, Lahore, Pakistan. Bidders should note that during the period from the receipt of the bid and until further notice from the Primary Contact, all queries should be communicated via the Primary Contact and in writing (e-mail) only. In the case of an urgent situation where the Primary Contact cannot be contacted, the bidder may alternatively direct their enquiries through the Secondary Contact.

Page 8 of 60

Bidders are also required to state, in their proposals, the name, title, fax number and e-mail address of the bidderâ&#x20AC;&#x2122;s authorized representative through whom all communications shall be directed until the process has been completed or terminated. The Purchaser will not be responsible for any costs or expenses incurred by bidders in connection with the preparation or delivery of bids. As authority competent to accept the tender, the Purchaser reserves the right to cancel the tender, accept or reject one or all bids without assigning any reason thereof. Failure to supply required items/services within the specified time period will invoke penalty as specified in this document.

Page 9 of 60

TERMS AND CONDITIONS OF THE TENDER 3.

Definitions

3.1 3.2

In this document, unless there is anything repugnant in the subject or context: "Authorized Representative" means any representative appointed, from time to time, by the Client, the Purchaser or the Contractor. “Availability and Reliability” means the probability that a component shall be operationally ready to perform its function when called upon at any point in time. "Client" means the Project lead of the Purchaser for whose particular project the Goods / Services have been procured or any other person, duly appointed in writing, by the Client, for the time being or from time to time, to act as Client for the purposes of the Contract. “Bidder/Tenderer” means the Firm/Company/Supplier/Distributers that may provide or provides the furniture, etc and related services to any of the public sector organization under the contract and have registered for the relevant business thereof. "Commencement Date of the Contract" means the date of signing of the Contract between the Purchaser and the Contractor. "Contract" means the agreement entered into between the Purchaser and the Contractor, as recorded in the Contract Form signed by the parties, including all Schedules and Attachments thereto and all documents incorporated by reference therein. "Contractor" means the person whose Tender has been accepted and awarded letter of Intent followed by the Contract by the Purchaser. "Contract Price" means the price payable to the Contractor under the Contract for the full and proper performance of its contractual obligations. "Contract Value" means that portion of the Contract Price adjusted to give effect to such additions or deductions as are provided for in the Contract which is properly apportion-able to the Goods or Services in question. "Defects Liability Expiry Certificate" means the certificate to be issued by the Client to the Contractor, in accordance with the Contract. "Day" means calendar day. "Defects Liability Period" means the warranty period following the taking over, during which the Contractor is responsible for making good, defects and damage in Goods and Services provided, under the Contract. "Force Majeure" means an event beyond the control of the Contractor and not involving the Contractor's fault or negligence and not foreseeable. Such events may include, but are not restricted to, acts of the Purchaser in its sovereign capacity, wars, revolutions, fires, floods, epidemics, quarantine restrictions, and freight embargoes. "Goods" means equipment, machinery, and/or other materials which the Contractor is required to supply to the Purchaser under the Contract. "Person" includes individual, association of persons, firm, company, corporation, institution and organization, etc., having legal capacity. "Prescribed" means prescribed in the Tender Document. "Purchaser" means the Punjab Information Technology Board (PITB), or any other person for the time being or from time to time duly appointed in writing by the Purchaser to act as Purchaser for the purposes of the Contract. "Origin" shall be considered to be the place where the Goods are produced or from where the

3.3 3.4

3.5

3.6 3.7

3.8 3.9 3.10

3.11 3.12 3.13

3.14

3.15 3.16 3.17 3.18

3.19

Page 10 of 60

3.22

Services are provided. Goods are produced when, through manufacturing, processing or assembling of components, a commercially recognized product results that is substantially different in basic characteristics or in purpose or utility from its components. The origin of Goods and Services is distinct from the nationality of the Contractor. "Services" means installation, configuration, deployment, commissioning, testing, training, support, after sale service, etc. of Goods and other such obligations which the Contractor is required to provide to the Purchaser under the Contract. “Taking-Over Certificate" means the certificate to be issued by the Client to the Contractor, in accordance with the Contract. "Works" means work to be done by the Contractor under the Contract.

Headings and Titles

3.20

3.21

In this document, headings and titles shall not be construed to be part thereof or be taken into consideration in the interpretation of the document and words importing the singular only shall also include the plural and vice versa where the context so requires.

Notice

5.1

In this document, unless otherwise specified, wherever provision is made for exchanging notice, certificate, order, consent, approval or instructions amongst the Contractor, the Purchaser and the Client, the same shall be: in writing; issued within reasonable time; served by sending the same by courier or registered post to their principal office in Pakistan or such other address as they shall notify for the purpose; and The words "notify", "certify", "order", “consent”, “approve”, "instruct", shall be construed accordingly.

5.1.1 5.1.2 5.1.3 5.1.4

Tender Scope

6.1

Punjab Information Technology Board (PITB), (hereinafter referred to as “the Purchaser”) invites / requests Proposals (hereinafter referred to as “the Tenders”) for design, supply, installation of furniture including soft partitions (hereinafter referred to as “the Goods”) on turnkey basis.

6.2

The execution will be carried out at 9th Floor Arfa Software Technology Park

6.3

The firm will design, assemble and deploy furniture for entire floor consisting of class room, Incubation halls, staff offices etc and also give after sales service for any repair and maintenance support.

Tender Eligibility

7.1 7.1.1 7.1.2 7.1.3

Eligible Tenderer is a Tenderer who: has a registered office in Pakistan; is a manufacturer / supplier / trader / whole seller of new furniture has an after sales service office and support staff available in Lahore

Page 11 of 60

7.1.4 7.1.5 7.1.6 7.1.7

has already served corporate clients has quoted on Turnkey basis for each or all LOTs has required relevant experience of setting up offices on a large scale with quality furniture. has the required relevant qualified personnel and enough strength to fulfill the requirement of assignment. 7.1.8 Conforms to the clause of “Responsiveness of Bid” given herein this tender document. 7.1.9 Goods and Services can only be supplied / sources / routed from “origin” in “eligible” member countries. a. Eligible” is defined as any country or region that is allowed to do business in Pakistan by the law of Government of Pakistan. b. "origin" shall be considered to be the place where the Goods are produced or from which the Services are provided. Goods are produced when, through manufacturing, processing or substantial and major assembling of components, a commercially recognized product results that is substantially different in basic characteristics or in purpose or utility from its components.

Tender Cost The Tenderer shall bear all costs / expenses associated with the preparation and submission of the Tender(s) and the Purchaser shall in no case be responsible / liable for those costs / expenses.

Joint Venture/Consortium

9.1

9.1.5

Joint ventures or Consortium are also eligible for this tender, as long as the joint venture complies with the following conditions: The Tenderers may form a joint venture of maximum two Tenderers/bidders. An Agreement Deed to that effect, legally executed and signed by all the partners shall be submitted with the bid. One partner of formulated joint venture will be designated the lead partner and would be get into legal contract with Purchaser and would be liable to incur liabilities, receive payments and receive instructions for and on behalf of any or all partners. A power of attorney to that effect, legally executed, signed by all the partners shall be submitted with the Tender/bid. There must be at least one locally registered company (Partner) of good repute, with relevant experience and proven track record, in the joint venture. All the partners shall be jointly and severally liable for the execution of the Contract in accordance with the terms and conditions of the Contract. The Tender, and in case of successfully qualifying both technical and financial evaluation, the Contract Deed, to that effect, shall be signed by the lead partner. Partners other than the lead would also be bound by the terms and conditions of the contract.

10.

Examination of the Tender Document

9.1.1

9.1.2

9.1.3 9.1.4

The Tenderer is expected to examine the Tender Document, including all instructions and terms and conditions.

11.

Clarification of the Tender Document The prospective bidders may solicit clarification of the Tender Document, within 05 working days of issuance of tender in writing. The clarification and its replies will be shared with all prospective bidders.

Page 12 of 60

12.

Amendment of the Tender Document

12.1

The Purchaser may, at any time prior to the deadline for submission of the Tender, at its own initiative or in response to a clarification requested by the Bidder(s), amend the Tender Document, on any account, for any reason. All amendment(s) shall be part of the Tender Document and binding on the Bidder(s). The Purchaser shall notify the amendment(s) in writing to the prospective Tenderers. The Purchaser may, at its exclusive discretion, amend the Tender Document to extend the deadline for the submission of the Tender, in which case all rights and obligations of the Purchaser and the Tenderers previously subject to the deadline shall thereafter be subject to the deadline as extended.

12.2 12.3

13.

Preparation / Submission of Tender

13.1 13.2 13.3

The Tenderer is only allowed to bid for each or all LOTs on turnkey basis. The Tenderer is not allowed to bid for partial LOT. The Tender and all documents relating to the Tender, exchanged between the Tenderer and the Purchaser, shall be in English. Any printed literature furnished by the Tenderer in another language shall be accompanied by an English translation which shall govern for purposes of interpretation of the Tender. The Tender shall be filed in / accompanied by the prescribed Forms, Annexes, Schedules, Charts, Drawings, Documents, Brochures, Literature, etc. which shall be typed, completely filled in, stamped and signed by the Tenderer or his Authorized Representative. In case of copies, photocopies may be submitted. The Tender shall be in two parts i.e the technical proposal and the financial proposal. Each proposal shall be in two sets i.e the original and the copy. In the event of any discrepancy between the original and the duplicate, the original shall govern. The Technical Proposal shall comprise the following, without quoting the price:

13.4

13.5

13.6

13.7 Technical Proposal Form (Annexure-B) 13.7.1 Affidavit and Undertaking (All terms & conditions and qualifications listed anywhere in the RFP have been satisfactorily vetted) (Annexure-G&H) 13.7.2 Covering letter duly signed and stamped by authorized representative. (Annexure-E) 13.7.3 Evidence of eligibility of the Tenderer and the Goods 13.7.4 Evidence of conformity of the Goods / the Services to the Tender Document 13.7.5 Undertaking and Evidence that the quoted Goods are genuine, brand new, non- refurbished, unaltered in any way, of the most recent / current model, imported through proper channel, and incorporate all recent improvements in design and materials 13.7.6 Technical Brochures / Literature 13.7.7 Details of Warranty and After-Sale Service 13.7.8 The Contractorâ&#x20AC;&#x2122;s financial capacity to mobilize and sustain the Supply of furniture and Services is imperative. In the Proposal, the Bidder is required to provide information on its financial status. 13.7.9 The statement must be signed by the authorized representative of the Bidder 13.7.10 Financial Capacity as per Annexure-K 13.7.11 Valid Registration Certificate for Income Tax & Sales Tax 13.7.12 Income Tax & Sales Tax Returns for the last three tax years 13.7.13 Power of Attorney, if an authorized representative is appointed (Annexure-F)

Page 13 of 60

13.8 13.8.1 13.8.2 13.8.3

The Financial Proposal shall comprise the following: Financial Proposal Form (Annexure-C) Price Schedule (Annexure-D) Tender Security (As per provisions of the clause Tender Security of this document) (Annexure- I)

13.9

The Tenderer shall seal the Original Technical Proposal in an envelope duly marked as under: Original Technical Tender for Tender Name. [Number of Tender] LOT No. [Name of the Purchaser] [Address of the Purchaser] [Name of the Tenderer] [Address of the Tenderer] [Phone No. of the Tenderer]

13.10

The Tenderer shall seal the Duplicate Technical Tender in an envelope duly marked as under: Duplicate Technical Proposal for Tender Name. [Name of Tender] LOT No. [Name of the Purchaser] [Address of the Purchaser] [Name of the Tenderer] [Address of the Tenderer] [Phone No. of the Tenderer]

13.11

The Tenderer shall follow the same process for the Financial Tender.

13.12 The Tenderer shall again seal the sealed envelopes of Original Technical Proposal and the Original Financial Proposal in an outer envelope, duly marking the envelope as under:

Page 14 of 60

Original Tender for Tender Name. [Name of Tender] LOT No. Strictly Confidential Open on [Last Date of submission of the Tender] [Name of the Purchaser] [Address of the Purchaser] [Name of the Tenderer] [Address of the Tenderer] [Phone No. of the Tenderer] 13.13 The Tenderer shall again seal the sealed envelopes of Duplicate Technical Proposal and the Duplicate Financial Proposal in an outer envelope, duly marking the envelope as under: Duplicate Tender for Tender Name. [Name of Tender] LOT No. Strictly Confidential Open on [Last Date of submission of the Tender] [Name of the Purchaser] [Address of the Purchaser] [Name of the Tenderer] [Address of the Tenderer] [Phone No. of the Tenderer] 13.14

13.15 13.16

The Tenderer shall enclose soft copies of the Technical Proposal and the Financial Proposals, including all Forms, Annexes, Schedules, Charts, Drawings, Documents, Brochures, Literature, etc., in the form of MS Word Documents, MS Excel Worksheets and Scanned images, with the hard copies. The Tender shall be mailed to reach and dropped in the Tender Box placed at the Reception of the Purchaserâ&#x20AC;&#x2122;s office, during office hours, up to due date and time. This is made obligatory to affix authorized signatures with official seal on all original and duplicate (copies) documents, annexures, copies, certificates, brochures, literature, drawings, letters, forms and all relevant documents as part of the bids submitted by the tenderer. Noncompliance with the same will cause the rejection of bid at the time of opening.

Page 15 of 60

14.

Tender Price

14.1 The quoted price shall be: 14.1.1 final / fixed against each Lot and valid until completion of all obligations under the Contract i.e. not subject to variation / escalation; 14.1.2 in Pak Rupees; 14.1.3 inclusive of all taxes, duties, levies, insurance, freight, etc. 14.2 If not specifically mentioned in the Tender(s), it shall be presumed that the quoted price is as per the above requirements. 14.3 Where no prices are entered against any item(s), the price of that item shall be deemed to have been distributed among the prices of other items, and no separate payment shall be made for that item(s). 14.4 In case of locally produced Items/goods, the price shall include all customs duties and sales and other taxes already paid or payable on the components and raw materials used in the manufacture or assembly of the item. In case of Contract of imported items offered ExWarehouse/Off-the-Shelf from within the Purchaserâ&#x20AC;&#x2122;s country, import duties and sales and other taxes already paid shall be shown separately.

15.

Tender Security

15.1 15.2 15.2.1 15.2.2

The Tenderer shall furnish the Tender Security against each LOT as under: As part of financial bid envelope, failing which will cause rejection of bid. Tender security would be submitted by the Bidder; if Total Tender Price is less than or equal to PKR 100 Million, in the form of Demand Draft / Pay Order / Cash Deposit Receipt (CDR), in the name of the Purchaser; if the Total Tender Price is more than PKR 100 Million, in the form of Bank Guarantee, issued by a scheduled bank operating in Pakistan, in the name of the Purchaser, as per the format provided in the Tender Document; for a sum equivalent to 2% of the Total Tender Price; denominated in Pak Rupees; have a minimum validity period of ninety days from the last date for submission of the Tender or until furnishing of the Performance Security, whichever is later. The proceeds of the Tender Security shall be payable to the Purchaser, on the occurrence of any / all of the following conditions: If the Tenderer withdraws the Tender during the period of the Tender validity specified by the Tenderer on the Tender Form; or If the Tenderer does not accept the corrections of his Total Tender Price; or If the Tenderer, having been notified of the acceptance of the Tender by the Purchaser during the period of the Tender validity, fails or refuses to furnish the Performance Security, in accordance with the Tender Document. The Tender security shall be returned to the technically unsuccessful Tenderer with unopened/sealed financial bid while the unsuccessful bidders of financial bid opening procedure will be returned the tender security only. The Tender Security shall be returned to the successful Tenderer on furnishing the Performance Security.

15.2.3

15.2.4 15.2.5 15.2.6 15.3 15.3.1 15.3.2 15.3.3

15.4

Page 16 of 60

16.

Tender Validity The Tender shall have a minimum validity period of ninety days from the last date for submission of the Tender. The Purchaser may solicit the Tenderer's consent to an extension of the validity period of the Tender. The request and the response thereto shall be made in writing. If the Tenderer agrees to extension of validity period of the Tender, the validity period of the Tender security shall also be suitably extended. The Tenderer may refuse extension of validity period of the Tender, without forfeiting the Tender security.

17.

Modification / Withdrawal of the Tender

17.1

The Tenderer may, by written notice served on the Purchaser, modify or withdraw the Tender after submission of the Tender, prior to the deadline for submission of the Tender. The Tender, withdrawn after the deadline for submission of the Tender and prior to the expiration of the period of the Tender validity, shall result in forfeiture of the Tender Security.

17.2

18.

Opening of the Tender

18.1

Tenders shall be opened, at PITB head office at given time and date, in the presence of the Tenderer(s) for which they shall ensure their presence without further invitation. The Tenderer's name, modifications, withdrawal, security, attendance of the Tenderer and such other details as the Purchaser may, at its exclusive discretion, consider appropriate, shall be announced and recorded. No tenderer or its representative will be allowed to keep any digital device (camera, audio recorder, cell phone etc.) during tender opening meeting at given time and location. Noncompliance will cause the rejection of respective bidder.

18.2

18.3

19.

Clarification of the Tender The Purchaser shall have the right, at his exclusive discretion, to require, in writing, further information or clarification of the Tender, from any or all the Tenderer(s). No change in the price or substance of the Tender shall be sought, offered or permitted except as required to confirm the corrections of arithmetical errors discovered in the Tender. Acceptance of any such correction is sold discretion of the purchaser

20.

Determination of Responsiveness of the Bid (Tender)

20.1

The Purchaser shall determine the substantial responsiveness of the Tender to the Tender Document, prior to the Tender evaluation, on the basis of the contents of the Tender itself without recourse to extrinsic evidence. A substantially responsive Tender is one which: meets the eligibility criteria for the Tenderer / the Goods / the Services; meets the Technical Specifications for the Goods / the Services; meets the delivery period / point for the Goods / the Services; meets the rate and limit of liquidated damages; offers fixed price quotations for the Goods / the Services; is accompanied by the required Tender Security as part of financial bid envelope; The original receipt of tender fee submitted, attached with technical bid envelope; is otherwise complete and generally in order;

20.1.1 20.1.2 20.1.3 20.1.4 20.1.5 20.1.6 20.1.7 20.1.8

Page 17 of 60

20.1.9 Conforms to all terms and conditions of the Tender Document, without material deviation or reservation. 20.2 A material deviation or reservation is one which affects the scope, quality or performance of the Goods or limits the Purchaser's rights or the Tenderer's obligations under the Contract. 20.3 The Tender determined as not substantially responsive shall not subsequently be made responsive by the Tenderer by correction or withdrawal of the material deviation or reservation. However, the Purchaser may waive off any minor non-conformity or inconsistency or informality or irregularity in the Tender.

21.

PARAMETERS OF TECHNICAL EVALUATION CRITERIA

A point system will be used for qualifying the contractors. Annexure A here gives the details: PASS MARKS: A technically eligible bidder, based on conditions listed in Clause 7, not meeting the 70% pass mark limit will be rejected in Technical Valuation, and its Financial Proposal will be returned to it unopened. All bidders scoring greater than or equal to 70% of the marks will be accepted in technical proposal, and their financial bids will be opened. PROVISO: Provided that if NONE or ONLY ONE (single) bidder exceeds the 70% pass mark, then the Purchaser SHALL decrease the Pass Mark limit to 60%. In other words, if TWO or more bidders exceed 70%, then the Pass Mark will NOT be decreased to 60%. If Pass Marks are decreased to 60%, then ALL bidders with scores greater than or equal to 60% will be considered EQUALLY as approved in the Technical Proposal, and their Financial Bids will be opened. According to the Technical Proposal, the Technical Specifications will be rated as follows. Bidders may fill in the below evaluation sheet and do their own evaluation for submission, but the evaluation done by the Purchaser shall be the valid evaluation and shall hold: Category Legal (Mandatory)

Description

Points

Certificate of Registration

Mandatory

Income Tax Registration

Mandatory

General Sales Tax Registration

Mandatory

Undertaking that the firm is not blacklisted and involved in litigation with Government

Mandatory

Financial / Experience Annual net turnover (Max Points 100)

10-15 million

10 Points

16-30 million

20 Points

31-40 million

30 Points

41-50 million

60 Points

Page 18 of 60

51-60 million

80 Points

61 million or above

100 Points

Audited Financial Reports (Max Points 75)

For the past 3 years

25 Points for each year

Income tax returns (Max points 75)

For the past 3 years

25 points for each year

Number of Similar Corporate Projects Successfully Deployed

20 Projects

5 Points for Each Successful Project

Cost of projects (supply of furniture on turnkey basis to corporates / companies) in the past 3 years

5-10 million

11-15 million

(Max Points 100)

16-25 million

26 million or above

100

10-20

20 Points

21-30

40 Points

31-40

60 Points

41-50

80 Points

51 or above

100 Points

>4 weeks

0 points

3 – 4 weeks

50 points

2– 3 weeks

75 points

Within 2 weeks

100 points

Projects (Max Points 100)

Human Resource

Total No of employees (Max Points 100)

Lead time (Delivery time for supply of furniture) from the date of issuance of Letter of Intent (Max 100 points) Quality of Service After sales service (free of cost repair and maintenance against normal wear and tear of parts / accessories) – (Max 100 points)

Less than 1 year

0 points

1 – 3 years

50 points

3 years or more

100 points

Note: Verifiable documentary proof for all above requirements and criteria points are mandatory requirement and marks will be awarded on the basis of these verifiable proofs. All bidders shall be obligated and held liable against the responses given against the above requirements. Contractor’s performance security maybe with held in case of non-compliance or filling in misleading facts just to win the tender.

Page 19 of 60

22.

Correction of errors / Amendment of Tender

22.1 The Tender shall be checked for any arithmetic errors which shall be rectified, as follows: 22.1.1 if there is a discrepancy between the amount in figures and the amount in words for the Total Tender Price entered in the Tender Form, the amount which tallies with the Total Tender Price entered in the Price Schedule, shall govern. 22.1.2 if there is a discrepancy between the unit rate and the total price entered in the price Schedule, resulting from incorrect multiplication of the unit rate by the quantity, the unit rate as quoted shall govern and the total price shall be corrected, unless there is an obvious and gross misplacement of the decimal point in the unit rate, in which case the total price as quoted shall govern and the unit rate shall be corrected. 22.1.3 if there is a discrepancy in the actual sum of the itemized total prices and the total tender price quoted in the Price Schedule, the actual sum of the itemized total prices shall govern. 22.2 The Tender price as determined after arithmetic corrections shall be termed as the Corrected Total Tender Price which shall be binding upon the Tenderer. 22.3 Adjustment shall be based on corrected Tender Prices. The price determined after making such adjustments shall be termed as Evaluated Total Tender Price. 22.4 The cost of making good any deficiency resulting from any acceptable, quantifiable variations and deviations from the terms and conditions of the Contract / Technical Specifications, shall be added to the corrected Tender Price for comparison purposes only. No credit shall be given for offering delivery period earlier than the specified period. 22.5 The Tenderer shall state the Tender Price for the payment terms outlined in the Conditions of Contract which will be considered for the evaluation of the Tender. The Tenderer may state alternate payment terms and indicate the reduction in the Tender price offered for such alternative payment terms. The Purchaser may consider the alternative payment terms offered by the Tenderer. 22.6 The Tenderers may offer discounts for items which shall be taken into account in the evaluation of the Tenders so as to determine the Tender offering the lowest evaluated cost for the Purchaser in deciding award(s) for whole tender.

23.

Rejection / Acceptance of the Tender

23.1

The Purchaser shall have the right, at his exclusive discretion, to increase / decrease the quantity of any or all item(s) without any change in unit prices or other terms and conditions, accept a Tender reject any or all tender(s), cancel / annul the Tendering process at any time prior to award of Contract, without assigning any reason or any obligation to inform the Tenderer of the grounds for the Purchaser's action, and without thereby incurring any liability to the Tenderer and the decision of the Purchaser shall be final. The Tender shall be rejected if it is: substantially non-responsive; or submitted in other than prescribed forms, annexes, schedules, charts, drawings, documents / by other than specified mode; or incomplete, un-sealed, un-signed, printed (hand written), partial, conditional, alternative, late; or subjected to interlineations / cuttings / corrections / erasures / overwriting; or the Tenderer submits more than one bids; or the Tenderer refuses to accept the corrected Total Tender Price; or the Tenderer has conflict of interest with the Purchaser; or

23.2 23.2.1 23.2.2 23.2.3 23.2.4 23.2.5 23.2.6 23.2.7

Page 20 of 60

23.2.8 the Tenderer tries to influence the Tender evaluation / Contract award; or 23.2.9 the Tenderer engages in corrupt or fraudulent practices in competing for the Contract award. 23.3 there is any discrepancy between bidding documents and bidderâ&#x20AC;&#x2122;s proposal i.e. any nonconformity or inconsistency or informality or irregularity in the submitted bid. 23.4 the Tenderer submits any financial conditions as part of its bid which are not in conformity with tender document.

24.

Award Criteria

24.1.

At first step, tenderer(s) fulfilling mandatory requirements and qualification criteria will stand qualified technically. At second step, technically qualified & successful tenderer(s) will be selected on lowest cost quoted, irrespective of their score in previous step.

24.2.

25.

Acceptance Letter (Letter of Intent) The Purchaser shall, send the Acceptance Letter to the successful Tenderer, prior to the expiry of the validity period of the Tender, which shall constitute a contract, until execution of the formal Contract. However, the Purchaser reserves exclusive rights to cancel the letter of Intent at any time, without giving any reason thereof. The supply time of the Tenderer / Contractor shall start from the date of issuance of the Letter of Intent.

26.

Performance Security

26.1

The technically and financially successful Tenderer shall furnish Performance Security against each LOT as under: within five (5) working days of the receipt of the Acceptance Letter from the Purchaser; in the form of a Bank Guarantee, issued by a scheduled bank operating in Pakistan, as per the format provided in the Tender Document; for a sum equivalent to 10% of the contract value; denominated in Pak Rupees; have a minimum validity period of ninety days from the date of Award Notification or until the date of expiry of warranty period, support period or termination of services, whichever is later. The proceeds of the Performance Security shall be payable to the Purchaser, on occurrence of any / all of the following conditions: If the Contractor commits a default under the Contract; If the Contractor fails to fulfill any of the obligations under the Contract; If the Contractor violates any of the terms and conditions of the Contract. The Contractor shall cause the validity period of the performance security to be extended for such period(s) as the contract performance may be extended. The Performance Security shall be returned to the Tenderer within thirty working days after the expiry of its validity on written request from the Contractor.

26.1.1 26.1.2 26.1.3 26.1.4 26.1.5 26.2 26.2.1 26.2.2 26.2.3 26.3

27.

Redressal of grievances by the procuring agency

27.1

The procuring agency shall constitute a committee comprising of odd number of persons, with proper powers and authorizations, to address the complaints of bidders that may occur prior to the entry into force of the procurement contract. Any bidder feeling aggrieved by any act of the procuring agency after the submission of his bid may lodge a written complaint concerning his grievances not later than fifteen days after the

27.2

Page 21 of 60

27.3 27.4 27.5

announcement of the bid evaluation report under rule 35 of PPRA rules 2009. The committee shall investigate and decide upon the complaint within fifteen days of the receipt of the complaint. Mere fact of lodging of a complaint shall not warrant suspension of the procurement process. Any bidder not satisfied with the decision of the committee of the procuring agency may lodge an appeal in the relevant court of jurisdiction.

Page 22 of 60

TERMS & CONDITIONS OF THE DRAFT CONTRACT

Contract Title:

Contract for PROCUREMENT OF FURNITURE AND AFTER SALES SERVICES FOR GOVERNMENT OF PUNJAB’S TECHNOLOGY INCUBATOR

between

Punjab Information Technology Board (PITB)

and

[name of Contractor]

Dated:

Page 23 of 60

TABLE OF CONTENTS

I. Agreement II. General Conditions of Contract 28. Contract 29. Contract Documents and Information 30. Contract Language 31. Standards 32. Commercial Availability 33. Patent Right 34. Execution Schedule 35. Packing 36. Insurance 37. Labeling 38. Delivery 39. Installation and Implementation 40. Site Preparation 41. Spare Parts and Support 42. Inspection and Testing 43. Taking-Over Certificate 44. Warranty 45. Ownership of Goods and Replaced Components 46. Defects Liability Expiry Certificate 47. Payment 48. Price 49. Contract Amendment 50. Assignment / Subcontract 51. Extensions in time for performance of obligations under the Contract 52. Liquidated Damages 53. Blacklisting 54. Forfeiture of Performance Security 55. Termination for Default 56. Termination for Insolvency 57. Termination for Convenience 58. Force Majeure 59. Dispute Resolution 60. Statutes and Regulations 61. Taxes and Duties 62. The Client 63. Authorized Representative 64. Waiver 65. Training 66. Documentation III.

Technical Specifications

Page 24 of 60

Agreement

This CONTRACT AGREEMENT (this “Contract”) made as of the [day] of [month], [year], between [full legal name of the Purchaser] (the “Purchaser”), on the one part, and [full legal name of Contractor], on the other part severally liable to the Purchaser for all of the Contractor’s obligations under this Contract and is deemed to be included in any reference to the term “Contractor.” RECITALS WHEREAS,

(a) The Government through the Purchaser intends to spend a part of its budget / funds for making eligible payments under this contract. Payments made under this contract will be subject, in all respects, to the terms and conditions of the Contract in lieu of the consulting services as described in the contract. (b) The Purchaser has requested the Contractor to provide certain supply of Goods/items as described in Tender Document; and (c) The Contractor, having represented to the Purchaser that it has the required professional skills, and personnel and technical resources, has agreed to provide such services on the terms and conditions set forth in this Contract.

NOW THEREFORE, the Parties to this Contract agree as follows: 1. The Contractor hereby covenants with the Purchaser to supply the Goods and provide the Services and to remedy defects / damage therein, at the time and in the manner, in conformity in all respects with the provisions of the Contract, in consideration of the payments to be made by the Purchaser to the Contractor. 2. The Purchaser hereby covenants with the Contractor to pay the Contractor, the Contract Price or such other sum as may become payable, at the times and in the manner, in conformity in all respects with the provisions of the Contract, in consideration of supply of the Goods and provision of the Services and remedying of defects / damage therein. 3. The following shall be deemed to form and be read and construct as part of this Contract: a. b. c. d. e.

The Tender Document Bidder’s Proposal Terms and Conditions of the Contract Special Stipulations The Technical Specifications

Page 25 of 60

f. g. h. i. j. k. l. m.

Tender Form Price Schedule Affidavit(s) Authorized Dealership / Agency Certificate Performance Security Service Level Agreement ( SLA ) (if required) Non-Disclosure Agreement (if required) Any Standard Clause acceptable for Purchaser

4. This Contract shall prevail over all other documents. In the event of any discrepancy / inconsistency within the Contract, the above Documents shall prevail in the order listed above.

IN WITNESS whereof the Parties hereto have caused this Contract to be executed in accordance with the laws of Pakistan as of the day, month and year first indicated above. For [full legal name of the Purchaser]:

For [full legal name of the Contractor]:

Signature

Name

Witnessed By:

WITNESSES Signature __________________ CNIC # __________________ Name __________________ Designation__________________ Address _________________

Signature ____________________ CNIC # ____________________ Name ____________________ Designation ____________________ Address __________________

Page 26 of 60

II General Conditions of Contract 28.

Contract The Purchaser shall, after receipt of the Performance Security from the successful Tenderer, send the Contract provided in the Tender Document, to the successful Tenderer. Within three working days of the receipt of such Contract, the Tenderer shall sign and date the Contract and return it to the Purchaser.

29.

Contract Documents and Information The Contractor shall not, without the Purchaser's prior written consent, make use of the Contract, or any provision thereof, or any document(s), specifications, drawing(s), pattern(s), sample(s) or information furnished by or on behalf of the Purchaser in connection therewith, except for purposes of performing the Contract or disclose the same to any person other than a person employed by the Contractor in the performance of the Contract. Disclosure to any such employed person shall be made in confidence and shall extend only as far as may be necessary for purposes of such performance.

30.

Contract Language The Contract and all documents relating to the Contract, exchanged between the Contractor and the Purchaser, shall be in English. The Contractor shall bear all costs of translation to English and all risks of the accuracy of such translation.

31.

Standards The Goods supplied and the Services provided under this Contract shall conform to the authoritative latest industry standards.

32.

Commercial Availability The Goods supplied under this Contract shall be commercially available at the time of signing of the contract. Commercial availability means that such Goods shall have been sold, installed and operationalized in more than two installations initiated under two separate contracts by manufacturer globally.

33.

Patent Right The Contractor shall indemnify and hold the Purchaser harmless against all third party claims of infringement of patent, trademark or industrial design rights arising from use of the Goods / the Service or any part thereof.

34.

Execution Schedule The Contractor shall submit an Execution Schedule, giving details of customs clearance, supply, installation, configuration, deployment, commissioning, testing, training, etc., as required under the Contract, to the Client, within three days of the signing of the Contract.

35.

Packing The Contractor shall provide such packing of the Goods as is sufficient to prevent their damage or deterioration during storage / transit to their final destination as indicated in the Contract.

Page 27 of 60

Packing case size and weights shall take into consideration, where appropriate, the remoteness of the final destination and withstand, without limitation, rough handling, exposure to extreme temperatures, salt and precipitation at all points in storage / transit. The Contractor shall arrange and pay for the packing of the Goods to the place of destination as specified in the Contract, and the cost thereof shall be included in the Contract Price.

36.

Insurance The Contractor shall provide such insurance of the Goods as is sufficient to protect against their damage or deterioration during storage / transit to their final destination as indicated in the Contract. The Contractor shall arrange and pay for the insurance of the Goods to the place of destination as specified in the Contract, and the cost thereof shall be included in the Contract Price.

37.

Labeling The Goods supplied under the Contract, shall be clearly labeled so as to correspond with the delivered documentation, with proper labeling scheme provided by the Client. All networking equipment, cables, connectors, ports, boxes shall be clearly labeled.

38.

Delivery

38.1

The Contractor shall indicate his delivery approach clearly specifying the requirements for packing, shipping and unpacking of deliverable hardware and documentation. The approach shall address shipment of deliverables to the various designated (installation) sites. The approach shall also specify any special shipping constraints such as custom requirements, security requirements, access arrangement or loading dock requirements. The Contractor shall deliver the Goods at PITBâ&#x20AC;&#x2122;s Technology Incubator at the 9th floor of Arfa Software Technology Park, 346B Ferozepur Road, Lahore, as specified by the Purchaser at the time of delivery. The Service shall remain at the risk and under the physical custody of the Contractor until the delivery and testing of the Goods is completed. The Contractor shall ensure that the Goods shall be delivered complete to enable the testing and training to proceed without interruption. If it shall appear to the Client that the Goods have been or are likely to be delayed by reason of incomplete delivery or for any other reasons, he may require the Contractor at the expense of the Contractor to dispatch the missing items of the Goods or suitable replacements thereof to the site of delivery by the fastest available means including air freight. The Contractor shall include in the Tender a detailed logistics plan which shall include support details for transportation, mobilization and personnel scheduling during project implementation and the warranty period. The Contractor shall provide maintenance, supply and procurement support necessary for Client to maintain all system, at the contracted performance and reliability level. The Contractor shall arrange and pay for the transport of the Goods to the place of destination as specified in the Contract, and the cost thereof shall be included in the Contract Price.

38.2 38.3

38.4

39.

Installation and Implementation

39.1

The Contractor shall ensure that the implementation design conforms to an open standard by which new services can be added without disruption to existing services. The Contractor shall ensure that the implementation is fault tolerant. This is accomplished by supplying a set of programs and procedures that allow the system recovery or roll back when a fault is detected.

39.2

Page 28 of 60

39.3 39.4 39.5 39.6

39.7

The Contractor shall provide a document stating step-by-step procedures for installation and disaster recovery to the Purchaser. The Contractor shall provide all the recent patches and updates for Firmware/Hardware, on a reliable media, with proper labeling, during the installation to the Purchaser. The Contractor shall configure the system for high availability and reliability, of all hardware and software. The Contractor shall submit detailed and complete installation, transition and cutover plan for the new system, installation procedures for the new components specifying equipment checkout, installation constraints, operational cutover, maintenance prior to Client acceptance and if special security and/or access arrangements are required. New equipment, shall be installed with existing equipment, and shall require close coordination between the Contractor and the Client personnel.

40.

Site Preparation

40.1

The Contractor shall be responsible to survey the site, prepare the site, determine power, air conditioning and floor space requirements. The Purchaser and the Client shall facilitate the Contractor in discharge of the above responsibilities.

40.2

41.

Spare Parts and Support

41.1

The Contractor shall ensure that the Services provided by the Contractor, under the Contract are standard. 41.2 The Contractor shall further ensure that the Services provided by the Contractor, under the Contract shall have no defect, arising from design, materials, installation, configuration, or from any act or omission of the Contractor that may develop under normal use of the provided Service. 41.3 The Contractor shall maintain sufficient backup stock of spare parts and tools locally at sites, for the maintenance of the supplied Goods, during the warranty period. 41.4 The Contractor shall ensure availability of spare parts and technical assistance for all components for at least three years, without major changes, after the completion of final acceptance. 41.5 The Contractor shall give six months advance notice on any discontinued part(s) with a suggestion for appropriate alternatives failing which will cause forfeiture of Performance Security. 41.6 The Contractor shall also identify and provide the following: 41.6.1 items (repairable spares, parts and consumable supplies) that are needed to maintain design performance, reliability and availability standards prescribed in the Technical Specifications. The quantity of spare parts and consumable items provided and kept shall be equal to the requirements for one year of operating stock; 41.6.2 items of high cost and/or long lead time (over thirty working days); 41.6.3 items whose design reliability is such that normal stock replenishment would not justify maintaining a level of the item in stock.

42.

Inspection and Testing

42.1

The Client shall inspect and test the Goods supplied, the Services provided or the Works carried out, under the Contract, to verify their conformity to the Technical Specifications. The inspections and tests shall be conducted at the premises of the Contractor / its

42.2

Page 29 of 60

42.3

42.4

42.5

subcontractor(s) / at the final destination. Where conducted at the premises of the Contractor / its subcontractor(s), the Contractor / its subcontractor(s) shall provide all-reasonable facilities and assistance, including access to drawings, production data and online verification from official web site of the Manufacture, to the inspectors, at no charge to the Purchaser. The Purchaser may reject the Goods, the Services or the Works if they fail to conform to the Technical Specifications, in any test(s) or inspection(s) and the Contractor shall either replace the rejected Goods, Services or Works or make all alterations necessary to meet the Technical Specifications, within three working days, free of cost to the Purchaser. The Purchaserâ&#x20AC;&#x2122;s post-delivery right to inspect, test and, where necessary, reject the Goods shall in no way be limited or waived by reason of pre-delivery inspection, testing or passing of the Goods. Nothing contained in Clauses 41.1 and 41.2 shall, in any way, release the Contractor from any Warranty or other obligations under the Contract.

43.

Taking-Over Certificate

43.1

The Contractor shall, by written notice served on the Client with a copy to the Purchaser, apply for a Taking-Over Certificate. The Client shall, within seven days of receipt of Contractor's application, either issue the Taking-Over Certificate to the Contractor with a copy to the Purchaser, stating the date of successful inspection / testing of the Goods or any portion thereof, for their intended purposes; or reject the application giving the reasons and specifying the work required to be done by the Contractor to enable the Taking-Over Certificate to be issued. Nothing contained in Clauses 42.1 and 42.2 shall, in any way, release the Contractor from any Warranty or other obligations under the Contract.

43.2

43.3

44.

Warranty

44.1

The Contractor shall warrant to the Purchaser that the Goods/Services supplied by the Contractor, under the Contract are genuine, brand new, non- refurbished, un-altered in any way, of the most recent or current model, imported through proper channel, and incorporate all recent improvements in design and materials, unless provided otherwise in the Contract. 44.2 The Contractor shall further warrant that the Goods/Services supplied by the Contractor, under the Contract shall have no defect, arising from design, materials, workmanship or from any act or omission of the Contractor that may develop under normal use of the supplied Goods/Services. 44.3 The Contractor shall provide Manufacturerâ&#x20AC;&#x2122;s warranty (if applicable) for minimum three years (hereinafter referred as Warranty Period), after the issue of Taking-over Certificate in respect of Goods, the Services and the Works, or any portion thereof, as the case may be, which will include: 44.3.1 Free, on site repair / replacement of defective / damaged parts and labor, within 48 hours; 44.3.2 On site replacement of defective / damaged Goods, if repair of such Goods involves a duration exceeding 48 hours. 44.4 The Contractor shall clearly mention Terms and Conditions of service agreements for the Goods supplied after the expiry of initial warranty period. In case of International Warranties, the local authorized dealers shall mention their service and warranty setup, details of qualified engineers, etc. 44.5 The Warranty Period shall start from the date of installation / configuration / deployment of the Goods on site. 44.6 The Client shall, by written notice served on the Contractor with a copy to the Purchaser, promptly indicate any claim(s) arising under the warranty. 44.7 The Contractor shall, within the prescribed time period, after receipt of such notice, repair or

Page 30 of 60

44.8

replace the defective / damaged Goods or parts thereof on site, without any cost to the Purchaser. The end user licenses, end user warranties and end user contracting support services shall be in the name of Purchaser, for the Goods supplied, the Services provided and the Works done, under the Contract.

45.

Ownership of Goods and Replaced Components Goods to be supplied to the Purchaser, pursuant to the Contract, shall become the property of the Purchaser when the Goods are taken over by the Purchaser. Defective components to be replaced by the Contractor, pursuant to the Contract, shall become the property of the Contractor as and where it lies.

46.

Defects Liability Expiry Certificate

46.1

The Contractor shall, after expiry of the warranty period, by written notice served on the Client with a copy to the Purchaser, apply for a Defects Liability Expiry Certificate. The Client shall, within seven days of receipt of such notice, either issue the Defects Liability Expiry Certificate to the Contractor with a copy to the Purchaser, stating the date of expiry of the Warranty Period for all the Goods supplied and fulfillment of all obligations by the Contractor, under the Contract; or reject the application giving the reasons and specifying the work required to be done by the Contractor to enable the Defects Liability Expiry Certificate to be issued.

46.2

47.

Payment

47.1

The Contractor shall submit an Application for Payment, in the prescribed form, to the Client. The Application for Payment shall: be accompanied by such invoices, receipts or other documentary evidence as the Client may require; state the amount claimed; and set forth in detail, in the order of the Price Schedule, particulars of the Goods supplied, the Services provided and the Works done, up to the date of the Application for Payment and subsequent to the period covered by the last preceding Certificate of Payment, if any. The Client shall issue a Certificate of Payment, in the prescribed form, to the Purchaser, with a copy to the Contractor, verifying the amount due, within seven days of receipt of an Application for Payment. The Client may withhold a Certificate of Payment on account of defect(s) / short coming(s) in the Goods supplied / non-satisfactory performance of the Services / the Works. The Client may make any correction or modification in a Certificate of Payment that properly be made in respect of any previous certificate. The Purchaser shall pay the amount verified in the Certificate of Payment within twenty one (21) days of receipt of a Certificate of Payment. Payment shall not be made in advance. The Purchaser shall make payment for the Goods supplied, the Services provided and the Works done, to the Contractor, as per Government policy, in Pak Rupees, through treasury cheque.

47.2

47.3

48.

Price The Contractor shall not charge prices for the Goods supplied, the Services provided and for other obligations discharged, under the Contract, varying from the prices quoted by the Contractor in the Price Schedule.

49.

Contract Amendment

49.1

The Purchaser may, at any time, by written notice served on the Contractor, alter, amend, omit, increase, decrease or otherwise change the nature, quality, quantity and scope, of all / any of the

Page 31 of 60

49.2

49.3 49.4 49.5

Goods / the Services / the Works, in whole or in part. The Contractor shall, within ten working days of receipt of such notice, submit a cost estimate and execution schedule of the proposed change (hereinafter referred to as the Change), to the Purchaser. The Contractor shall not execute the Change until and unless the Purchaser has allowed the said Change, by written order served on the Contractor with a copy to the Client. The Change, mutually agreed upon, shall constitute part of the obligations under this Contract, and the provisions of the Contract shall apply to the said Change. No variation in or modification in the Contract shall be made, except by written amendment signed by both the Purchaser and the Contractor.

50.

Assignment / Subcontract

50.1

The Contractor shall not assign or sub-contract its obligations under the Contract, in whole or in part, except with the Purchaser's prior written consent. The Contractor shall guarantee that any and all assignees / subcontractors of the Contractor shall, for performance of any part / whole of the work under the contract, comply fully with the terms and conditions of the Contract applicable to such part / whole of the work under the contract.

50.2

51.

Extensions in time for performance of obligations under the Contract If the Contractor encounters conditions impeding timely performance of any of the obligations, under the Contract, at any time, the Contractor shall, by written notice served on the Purchaser with a copy to the Client, promptly indicate the facts of the delay, its likely duration and its cause(s). As soon as practicable after receipt of such notice, the Purchaser shall evaluate the situation and may, at its exclusive discretion, without prejudice to any other remedy it may have, by written order served on the Contractor with a copy to the Client, extend the Contractor's time for performance of its obligations under the Contract.

52.

Liquidated Damages If the Contractor fails / delays in performance of any of the obligations, under the Contract / violates any of the provisions of the Contract / commits breach of any of the terms and conditions of the Contract the Purchaser may, without prejudice to any other right of action / remedy it may have, deduct from the Contract Price, as liquidated damages, a sum of money @0.25% of the Contract Price which is attributable to such part of the Goods / the Services / the Works as cannot, in consequence of the failure / delay, be put to the intended use, for every day between the scheduled delivery date(s), with any extension of time thereof granted by the Purchaser, and the actual delivery date(s). Provided that the amount so deducted shall not exceed, in the aggregate, 50% of the Contract Price.

53.

Blacklisting

53.1

53.2

Page 32 of 60

54.

Forfeiture of Performance Security If the Contractor fails / delays in performance of any of the obligations, under the Contract / violates any of the provisions of the Contract / commits breach of any of the terms and conditions of the Contract the Purchaser may, without prejudice to any other right of action / remedy it may have, forfeit Performance Security of the Contractor. Failure to supply required items/services within the specified time period will invoke penalty as specified in this document. In addition to that, Performance Security amount will be forfeited and the company will not be allowed to participate in future tenders as well.

55.

Termination for Default

55.1

If the Contractor fails / delays in performance of any of the obligations, under the Contract / violates any of the provisions of the Contract / commits breach of any of the terms and conditions of the Contract the Purchaser may, at any time, without prejudice to any other right of action / remedy it may have, by written notice served on the Contractor with a copy to the Client, indicate the nature of the default(s) and terminate the Contract, in whole or in part, without any compensation to the Contractor. Provided that the termination of the Contract shall be resorted to only if the Contractor does not cure its failure / delay, within fifteen working days (or such longer period as the Client may allow in writing), after receipt of such notice. If the Purchaser terminates the Contract for default, in whole or in part, the Purchaser may procure, upon such terms and conditions and in such manner as it deems appropriate, Goods / Services / Works, similar to those undelivered, and the Contractor shall be liable to the Purchaser for any excess costs for such similar Goods / Services / Works. However, the Contractor shall continue performance of the Contract to the extent not terminated.

55.2

56.

Termination for Insolvency If the Contractor becomes bankrupt or otherwise insolvent, the Purchaser may, at any time, without prejudice to any other right of action / remedy it may have, by written notice served on the Contractor with a copy to the Client, indicate the nature of the insolvency and terminate the Contract, in whole or in part, without any compensation to the Contractor.

57.

Termination for Convenience

57.1

The Purchaser may, at any time, by written notice served on the Contractor with a copy to the Client, terminate the Contract, in whole or in part, for its convenience, without any compensation to the Contractor. 57.2 The Goods and the Services which are complete or to be completed by the Contractor, within thirty working days after the receipt of such notice, shall be accepted by the Purchaser. For the remaining Goods, the Purchaser may elect: 57.2.1 to have any portion thereof completed and delivered; and/or 57.2.2 to cancel the remainder and pay to the Contractor an agreed amount for partially completed Goods, Services, Works and materials / parts previously procured by the Contractor for the purpose of the Contract, together with a reasonable allowance for overhead & profit.

58.

Force Majeure

58.1

Force majeure shall mean any event, act or other circumstances not being an event, act or circumstance under the control of the purchaser or of the contractor. Non-availability of materials/supplies or of import license or of export permit shall not constitute Force majeure. If

Page 33 of 60

58.2

58.3

by reasons of Force Majeure supplies cannot be delivered by the due delivery date then the delivery date may be extended appropriately by the purchaser keeping in view all the circumstances and requirements of the Purchaser. The Contractor shall not be liable for liquidated damages, forfeiture of its Performance Security, blacklisting for future tenders, termination for default, if and to the extent his failure / delay in performance /discharge of obligations under the Contract is the result of an event of Force Majeure. If a Force Majeure situation arises, the Contractor shall, by written notice served on the Purchaser with a copy to the Client, indicate such condition and the cause thereof. Unless otherwise directed by the Purchaser in writing, the Contractor shall continue to perform under the Contract as far as is reasonably practical, and shall seek all reasonable alternative means for performance not prevented by the Force Majeure event.

59.

Dispute Resolution

59.1

The Purchaser and the Contractor shall make every effort to amicably resolve, by direct informal negotiation, any disagreement or dispute arising between them under or in connection with the Contract. If, after thirty working days, from the commencement of such informal negotiations, the Purchaser and the Contractor have been unable to amicably resolve a Contract dispute, either party may, require that the dispute be referred for resolution by arbitration under the Pakistan Arbitration Act, 1940, as amended, by one or more arbitrators selected in accordance with said Law. The place for arbitration shall be Lahore, Pakistan. The award shall be final and binding on the parties.

59.2

60.

Statutes and Regulations

60.1 60.2

The Contract shall be governed by and interpreted in accordance with the laws of Pakistan. The Contractor shall, in all matters arising in the performance of the Contract, conform, in all respects, with the provisions of all Central, Provincial and Local Laws, Statutes, Regulations and By-Laws in force in Pakistan, and shall give all notices and pay all fees required to be given or paid and shall keep the Purchaser indemnified against all penalties and liability of any kind for breach of any of the same. The Courts at Lahore shall have the exclusive territorial jurisdiction in respect of any dispute or difference of any kind arising out of or in connection with the Contract.

60.3

61.

Taxes and Duties The Contractor shall be entirely responsible for all taxes, duties and other such levies imposed make inquiries on income tax / sales tax to the concerned authorities of Income Tax and Sales Tax Department, Government of Pakistan.

62.

Contract Cost The Contractor shall bear all costs / expenses associated with the preparation of the Contract and the Purchaser shall in no case be responsible / liable for those costs / expenses.

63.

The Client

63.1

The Client shall only carry out such duties and exercise such authority as specified in the Contract. The Client shall have no authority to relieve the Contractor of any of his obligations under the Contract, except as expressly stated in the Contract. The Contractor shall proceed with the decisions, instructions or approvals given by the Client in accordance with these Conditions. The Client shall conform with all the relevant clauses of this Tender Document to carry out all

63.2 63.3

Page 34 of 60

responsibilities assigned thereto in a timely manner.

64.

Authorized Representative

64.1

The Purchaser, the Client or the Contractor may, at their exclusive discretion, may appoint their Authorized Representative and may, from time to time, delegate any / all of the duties / authority, vested in them, to their authorized Representative(s), including but not limited to, signing on their behalf to legally bind them, and may, at any time, revoke such delegation. The Authorized Representative shall only carry out such duties and exercise such authority as may be delegated to him, by the Purchaser, the Client or the Contractor. Any such delegation or revocation shall be in writing and shall not take effect until notified to the other parties to the Contract. Any decision, instruction or approval given by the Authorized Representative, in accordance with such delegation, shall have the same effect as though it had been given by the Principal. Notwithstanding Clause 65.4, any failure of the Authorized Representative to disapprove any Goods or Services or Works shall not prejudice the right of the Client to disapprove such Goods or Services or Works and to give instructions for the rectification thereof. If the Contractor questions any decision or instruction of the Authorized Representative of the Purchaser / the Client, the Contractor may refer the matter to the Purchaser / the Client who shall confirm, reverse or vary such decision or instruction.

64.2 64.3 64.4 64.5

64.6

65.

Waiver Failure of either party to insist upon strict performance of the obligations of the other party, under the Contract, shall in no way be deemed or construed to affect in any way the right of that party to require such performance.

66.

Training

66.1

The Contractor shall arrange and undertake a comprehensive training program for the staff nominated by the Purchaser / the Client to ensure that they shall acquire a good working knowledge of the operation, and general maintenance of the Goods to be supplied under the Contract. In case of non-compliance with instructions, non-cooperation or other difficulties experienced by the Contractor with regard to any of these personnel, the Contractor shall apprise the Purchaser / Client and proceed to implement suitable remedial measures after consultation with them.

66.2

67.

Documentation The Contractor shall furnish the user documentation, the operation manuals, and service manuals for each appropriate unit of the supplied Goods and other information pertaining to the performance of the Goods, in hard copy format, in soft copy format and in the form of on-line help, before the Goods are taken over by the Purchaser.

68.

Special Stipulations

SCHEDULE-A, SPECIAL STIPULATIONS For ease of Reference, certain special stipulations are as under: Tender Security

The Contractor shall furnish the Tender Security as under:

Page 35 of 60

For each Lot separately (if bidder is submitting their bids against multiple Lots); if Total Tender Price is less than or equal to PKR 100 Million, in the form of Demand Draft / Pay Order / Cash Deposit Receipt (CDR), in the name of the Purchaser; if Total Tender Price is more than PKR 100 Million, in the form of Bank Guarantee, issued by a scheduled bank operating in Pakistan, in the name of the Purchaser, as per the format provided in the Tender Document; for a sum equivalent to 2% of the Total Tender Price; denominated in Pak Rupees; Have a minimum validity period of ninety days from the last date for submission of the Tender or until furnishing of the Performance Security, whichever is later The successful Contractor shall furnish Performance Security as under: For each Lot separately (if bidder is technically and financially successful for more than one LOTs); within five (5) working days of the receipt of the Acceptance Letter from the Purchaser; Performance Security

in the form of a Bank Guarantee, issued by a scheduled bank operating in Pakistan, as per the format provided in the Tender Document; for a sum equivalent to 10% of the contract value; denominated in Pak Rupees; Have a minimum validity period of ninety days from the date of Award Notification or until the date of expiry of warranty period, whichever is later

Delivery Period

Within four (04) weeks from the issuance of acceptance letter.

Liquidated damages for failure / delay in supply / installation / configuration of Goods / Services / Works by the Contractor

Liquidated damages shall be levied @ 0.25% of the Contract Price which is attributable to such part of the Goods / the Services / the Works as cannot, in consequence of the failure / delay, be put to the intended use, for every day between the scheduled delivery date(s), with any extension of time thereof granted by the Purchaser, and the actual delivery date(s). Provided that the amount so deducted shall not exceed, in the aggregate, 50% of the Contract Price. (This penalty will also be invoked on the commitments given by the Contractor in the technical proposal)

Page 36 of 60

Annexure-A

TECHNICAL SPECIFICATIONS INTERIOR DESIGNING, SUPPLY AND FIXING OF FURNITURE ON TURNKEY BASIS FOR EACH OR ALL LOT(s)  Execution of work will carried out on 9th Floor of ASTP (Arfa Software Technology Park)  9th Floor of ASTP is 10924 square feet  The successful firm will design, supply, affix and deploy the furniture and fixtures for class room, incubation halls, staff offices, executive offices, conference rooms, multipurpose room, etc.  Bidders would have to submit detailed plan along with images, specifications, colors available for each furniture type and lead time for individual LOTs.  The firm will execute the work on turnkey basis and will provide three years warranty on following term and conditions  1st Year- The item will be replaced under warranty term and conditions  2nd Year and 3rd Year the item will be repaired under warrant term and conditions  The firm will supply the furniture with complete deployment and fixing  Detailed Bill of quantity along specifications and draft design images are as below. However all the given specifications are at minimum and the prospective bidder may bid with higher specifications.  The Purchaser reserves the right to place order for some or all of the items and in a quantity less, equal to or more than the one listed in the table below, thus pricing and payment will be done as per the rate quoted per unit.  A detailed drawing - floor plan (for sample purposes) in AUTO-CAD format is also available with the Purchaser upon request, for which the primary / secondary contacts may be reached.

Page 37 of 60

BOQ along with Specifications LOT .# A

Item Description

Size

Specification

Image

Qty

Unit

W:1200 mm D:600 mm

TOP MADE OF 18MM THICK LAMINATED BOARD WITH MATCHING PVC EDGING & TRIANGULAR WIRE CUP. WITH M.S. PIPE DULY POWDER COATED LEGS, NO KEY BOARD TRAY REQUIRED, NO CPU TROLLY REQUIRD, NO FRONT SOFT BOARD PARTITION REQUIRED.

160

Nos.

Design as per image

MEDIUM BACK. SEAT & BACK UPHOLSTERED WITH BEST QUALITY FOAM & FABRIC WITH ARMS IN PP.REVOLVING, RECLINING AND HYDLROIC SYSTEMS WITH 5 STAR PEDESTAL PU BASE.

Nos

INCUBATION ROOM FURNITURE :

WORKSTATIONS / WORKBENCHES (for 2 persons)

CHAIRS

CONFERENCE TABLES (for 6 persons)

CHAIRS

STAFF OFFICES:

MANAGER’S DESKS

H: 760mm W: 1650mm D: 900mm

H: 760mm W: 1520mm D: 760mm

TABLE FOR 06 PERSONS WITH OVER ALL STURCTURE MADE OF MS POWDER COATED. TOP MADE OF THICK LAMINATED BOARD WITH WITH MATCHING PVC EDGING. NORMAL LEGS.

Nos.

VISITOR MEDIUM BACK (OVER ALL STRUCTURE MADE OF ARMS IN SOLID WOOD + UPHOLSTRY WITH BEST QUALITY FOAM & LEATHRITE + M.S PIPE POWDER COATED. POLISH FINISH.

Nos

TOP & VANITY PANEL MADE OF LAMINATED BOARD WITH METAL BASE AT BOTH SIDES OF THE TABLE DULY POWDER COATED.

Nos

Page 39 of 60

DRAWER PADESTAL

BASE CABINET (SMALL)

Design as per image

OVER ALL STRUCTURE SHOULD BE MADE OF AT LEAST 18MM THICK LAMINATED BOARD WITH PVC EDGING AND SS HANDLES. SHOULD HAVE AT LEAST THREE DRAWERS WITH THE CENTER LOCK SYSTEM AND WHEEL CASTERS. TWO TOP DRAWERS STANDARD SIZE, LAST ONE SHOULD BE BIGGER FOR STORING BOX FILES.

Nos

H: 825mm W: 1000mm D: 425mm

OVERALL STRUCTURE MADE OF LAMINATION BOARD WITH MATCHING PVC EDGING. WITH SS HANDLES. LOCK & KEY FOR BOTH DOORS. INTERNAL STORAGE FOR BOX FILES, TWO ADJUSTABLE SHELVES BOTH SIDES.

Nos

Page 40 of 60

BASE CABINET (MEDIUM)

MANAGER CHAIRS (HIGH BACK)

H: 1200mm W: 1000mm D: 425mm

OVERALL STRUCTURE MADE OF LAMINATION BOARD WITH MATCHING PVC EDGING. WITH SS HANDLES. LOCK & KEY FOR BOTH DOORS. INTERNAL STORAGE FOR BOX FILES, AT LEAST THREE ADJUSTABLE SHELVES BOTH SIDES.

Nos

Design as per image

HIGH BACK. SEAT & BACK UPHOLSTERED WITH BEST QUALITY FOAM & FABRIC WITH ARMS IN PP.REVOLVING, RECLINING AND HYDLROIC SYSTEMS WITH 5 STAR PEDESTAL PU BASE.

Nos

Page 41 of 60

VISITOR’S CHAIRS

EXECUTIVE ROOMS AND CONFERENCE ROOM:

EXECUTIVE TABLES

Design As per Image

MEDIUM BACK. SEAT & BACK UPHOLSTERED WITH BEST QUALITY FOAM & FABRIC WITH ARMS IN PP. NON RECLINING WITH NON REVOLVING BASE.

Nos

H: 760mm W: 1800mm D: 900mm

44MM THICK TOP WITH PARTAL PACKING + HONEYCOMB + 6MM MDF ON BOTH SIDES SAPELE VENEER PRESSED HAVING CABLEDUCTING. STRUCTURE MADE OF 18MM THICK PARTICLEBOARD VENEERED. SMOKED WALNUT POLISH FINISH. OVER ALL IN KD FITTING AS PER DRAWING. 40% GLOSS, MADE OF - WOOD AND VENEER, POLISH SMOKED WALNUT. .

Nos.

Page 42 of 60

EXECUTIVE SIDE RACK

CONFERENCE TABLE FOR 08 PERSONS

H: 760mm W: 1200mm D: 550mm

44MM THICK WITH PARTAL PACKING + HONEYCOMB + 6MM MDF ON BOTH SIDES SAPELE VENEER PRESSED HAVING CABLE DUCTING. STRUCTURE MADE OF 18MM THICK PARTICLEBOARD VENEERED HAVING DRAWER, KEYBOARD TRAY & ONE OPENABLE SHUTTER. SMOKED WALNUT POLISH FINISH. OVER ALL IN KD FITTING 40% GLOSS, MADE OF - WOOD AND VENEER, POLISH SMOKED WALNUT

Nos.

H:760 mm W:2400 mm D:1200 mm

OVER ALL STRUCTURE SHOULD BE MADE OF 18MM THICK PARTICLE BOARD TOP WITH MOHAGONY VENEER PRESSED ON BOTH SIDES.LEGS WITH M.S PIPE DULY POWDER COATED AND POLISHED IN JECONEAN FINISH AND OVER ALL KD FITTING.

Nos

Page 43 of 60

EXECUTIVE CHAIRS

Design as per image

CHESTER TUFTED. ARMS MADE OF SOLID ASH WOOD AND UPHOLSTRED WITH BEST QUALITY FOAM & LEATHERITTE. REVOLVING & RECLINING. PU GAS LIFTER MECHANSIM. PEDESTAL POLISH IN JACOBEAN FINISH. OVER ALL IN KD FITTING.

COAT HANGER STAND

Design as per image

COMPLETELY MADE OF SOLID WOOD, POLISH FINISH. WOOD - BEECH, POLISH - JACOBEAN

Nos

Page 44 of 60

EXECUTIVE VISITOR CHAIRS

SOFAS (SINGLE SEATER)

SOFAS (TWO SEATER)

Design as per image

STRUCTURE MADE UP OF SOLID BEECH WOOD AND ARMS MADE UP OF MS PIPE POWDER COATED. SEAT & BACK UPHOLSTERED WITH BEST QUALITY FOAM & BLACK LEATHERITE.

Nos.

H: 660mm W: 760mm D: 785mm

FULLY UPHOLSTERED WITH BEST QUALITY FOAM AND LEATHERITE WITH M.S. PIPE POWDER COATED FRAME AND LEGS. BASE SHOULD BE MADE UP OF M.S PIPE WITH CHARCOAL GREY POWDER COATING.

Nos.

W: 1600mm H: 660mm D: 785mm

FULLY UPHOLSTERED WITH BEST QUALITY FOAM AND LEATHERITE WITH M.S. PIPE POWDER COATED FRAME AND LEGS. BASE SHOULD BE MADE UP OF M.S. PIPE WITH CHARCOAL GREY POWDER COATING.

Nos.

Page 45 of 60

CENTER TABLE

Design as per image

SIDE TABLE

Design as per image

CLASS ROOM AND DINING AREA:

CHAIR TABLET ARM

Design As per Image

OVER ALL STRUCTURE MADE OF 18MM THICK CHIPBOARD TABLE TOP WITH MOHAGONY VENEER PRESSED ON BOTH SIDES + LEGS IN BEECH WOOD POLISH IN JACOBEAN FINISH. AS PER DRAWING.), , MADE OF - WOOD AND VENEER, WOOD - BEECH, POLISH - JACOBEAN, TOP MADE OF - VENEER OVER ALL STRUCTURE MADE OF 18MM THICK CHIPBOARD TABLE TOP WITH MOHAGONY VENEER PRESSED ON BOTH SIDES + LEGS IN BEECH WOOD POLISH IN JACOBEAN FINISH. AS PER DRAWING.), , MADE OF - WOOD AND VENEER, WOOD - BEECH, POLISH - JACOBEAN, TOP MADE OF - VENEER

SEAT AND BACK SHOULD BE IN BEST QUALITY BLACK FIBRE. FRAME OF CHAIR SHOULD BE IN IN CHROME FINISH. WITH TABLET.

Nos.

Page 46 of 60

WHITE BOARD WITH STAND

TABLE FOR DINING AREA / RECREATION ROOM (for 6 persons)

CHAIRS FOR DINING AREA / RECREATION ROOM and ADMIN ROOM

6ft. X 3ft.

OVERALL STRUCTURE SHOULD BE MADE UP OF WHITE LAMINATION ALONG WITH PROVISION OF A STAND AND DUSTER TRAY.

H: 760mm W: 1650mm D: 900mm

TABLE FOR 06 PERSONS WITH OVER ALL STURCTURE MADE OF MS POWDER COATED. TOP MADE OF THICK LAMINATED BOARD WITH WITH MATCHING PVC EDGING. NORMAL LEGS.

VISITOR MEDIUM BACK (OVER ALL STRUCTURE MADE OF ARMS IN SOLID WOOD + UPHOLSTRY WITH BEST QUALITY FOAM & LEATHRITE + M.S PIPE POWDER COATED. POLISH FINISH.

Nos.

Page 47 of 60

H: 1200mm W: 1000mm D: 425mm

OVERALL STRUCTURE MADE OF LAMINATION BOARD WITH MATCHING PVC EDGING. WITH SS HANDLES. LOCK & KEY FOR BOTH DOORS. INTERNAL STORAGE FOR CROCKERY, AT LEAST THREE ADJUSTABLE SHELVES BOTH SIDES OR 2 ADJUSTABLE SHELVES WITH 1 DRAWER.

Nos

BASE CABINET (MEDIUM) FOR STORING CROCKERY, etc.

RECREATION ROOM

FOOSE BALL TABLE

As per image

Wooden table with 8 rods as per image, without glass top

Nos.

BEAN BAGS

As per image

Leatherite covered bean bags stuffed with ball fiber, various colors, as per image

Nos.

Page 48 of 60

Annexure-B Technical Proposal Submission Form [Location, Date] To (Name and address of Client / Purchaser)_

Dear Sir, We, the undersigned, offer to provide the _(insert title of assignment)_ in accordance with your Request for Proposal/Tender Document dated _(insert date)_ and our Proposal. We are hereby submitting our Proposal, which includes the Technical Proposal and the Financial Proposal sealed in two separate envelopes. We undertake, if our Proposal is accepted, to provide supply of _________related to the assignment. We also confirm that the Government of Pakistan / Punjab has not declared us, or any, ineligible on charges of engaging in corrupt, fraudulent, collusive or coercive practices. We furthermore, pledge not to indulge in such practices in competing for or in executing the Contract, and we are aware of the relevant provisions of the Proposal Document.

We understand you are not bound to accept any Proposal you receive.

We remain, Yours sincerely, Authorized Signature (In full and initials) Name and Designation of Signatory Name of Firm Address

Annexure-C Financial Proposal Submission Form (Part of Financial Bid Envelope) [Location, Date]

(Name and address of Client / Purchaser)_

Dear Sir, We, the undersigned, offer to provide the _(Insert title of assignment)_ in accordance with your Request for Proposal dated _(insert date)_ and our Technical Proposal. Our attached Financial Proposal is for the sum of _(insert amount in words and figures)_. This amount is inclusive of all taxes.

Our Financial Proposal shall be binding upon us subject to the modifications resulting from Contract negotiations, up to expiration of the validity period of the Proposal, i.e. before the date indicated in _______ of the Proposal Data Sheet.

We also declare that the Government of Pakistan / Punjab has not declared us or any SubContractors for any part of the Contract, ineligible on charges of engaging in corrupt, fraudulent, collusive, or coercive practices. We furthermore, pledge not to indulge in such practices in competing for or in executing the Contract, and are aware of the relevant provisions of the Proposal Document.

We understand you are not bound to accept any Proposal you receive.

Signed In the capacity of: Duly authorized to sign the proposal on behalf of the Applicant. Date:

Page 50 of 60

Annexure-D Price Schedule/ Financial Cost Sheet for Each or All LOT(s) the bidder is applying for

S.No.

Item Description

Units

Price per unit (Excluding all taxes)

Total Taxes

Unit Price (Including all taxes)

Total Cost (No. of units x unit cost) (including all taxes) X

X will determine the total bid cost Total Cost (in words) Rs. ________

Date ___________ Place __________ Signature of authorized person Name:

(Company Seal)

__________________ In the capacity of Dully authority by

Note: No cutting or overwriting is allowed. Any cutting or overwriting will lead to rejection of the financial bid.

Page 51 of 60

Annexure-E Format for Covering Letter

To (Name and address of Purchaser)

Sub:

________________________________________________.

Dear Sir, a) Having examined the tender document and Appendixes we, the undersigned, in conformity with the said document, offer to provide the said items on terms of reference to be signed upon the award of contract for the sum indicated as per financial bid. b) We undertake, if our proposal is accepted, to provide the items/services comprise in the contract within time frame specified, starting from the date of receipt of notification of award from the client Department / Office. c) We agree to abide by this proposal for the period of ____ days (as per requirement of the project) from the date of bid opening and it shall remain binding upon us and may be accepted at any time before the expiration of that period. d) We agree to execute a contract in the form to be communicated by the _(insert name of the Purchaser)_, incorporating all agreements with such alterations or additions thereto as may be necessary to adapt such agreement to the circumstances of the standard. e) Unless and until a formal agreement is prepared and executed this proposal together with your written acceptance thereof shall constitute a binding contract agreement. f) We understand that you are not bound to accept a lowest or any bid you may receive, not to give any reason for rejection of any bid and that you will not defray any expenses incurred by us in biding. g) We would like to clearly state that we qualify for this work as our company meets all the pre-F criteria indicated on your tender document. The details are as under:

_________________________ Authorized Signatures with Official Seal

Page 52 of 60

Annexure-F INSTRUCTION FOR PREPARATION OF POWER OF ATTORNEY

a) To be executed by an authorized representative of the bidder. b) The mode of execution of the Power of Attorney should be in accordance with the procedure, if any, laid down by the applicable law and the charter documents of the executants and when it is so required the same should be under common seal affixed in accordance with the required procedure. c) Also, wherever required, the Bidder should submit for verification the extract of the charter documents and documents such as a resolution/power of attorney in favor of the Person executing this Power of Attorney for the delegation of power hereunder on behalf of the Bidder. d) In case the Application is signed by an authorized Director / Partner or Proprietor of the Applicant, a certified copy of the appropriate resolution / document conveying such authority may be enclosed in lieu of the Power of Attorney.

Page 53 of 60

Format of Power-of-Attorney POWER OF ATTORNEY (On Stamp Paper of relevant value) Know all men by these presents, we (name of the company and address of the registered office) do hereby appoint and authorize Mr. (full name and residential address) who is presently employed with us and holding the position of as our attorney, to do in our name and on our behalf, all such acts, deeds and things necessary in connection with or incidental to our proposal for (name of the project) in response to the tenders invited by the (name of the Purchaser) including signing and submission of all documents and providing information/responses to (name of the Purchaser) in all matters in connection with our Bid. We hereby agree to ratify all acts, deeds and things lawfully done by our said attorney pursuant to this Power of Attorney and that all acts, deeds and things done by our aforesaid attorney shall and shall always be deemed to have been done by us.

Dated this _____ day of ____________________ 20__

For ________________________________

(Signature) (Name, Designation and Address) Accepted

(Signature) (Name, Title and Address of the Attorney) Date:

Page 54 of 60

Annexure-G UNDERTAKING It is certified that the information furnished here in and as per the document submitted is true and correct and nothing has been concealed or tampered with. We have gone through all the conditions of tender and is liable to any punitive action for furnishing false information / documents.

Dated this _____ day of ____________________ 20__

Signature

(Company Seal) __________________ In the capacity of

Duly authorized to sign bids for and on behalf of:

Page 55 of 60

Annexure-H AFFIDAVIT Integrity Pact We _(Name of the bidder / supplier)_ being the first duly sworn on oath submit, that Mr. / Ms. ________ (if participating through agent / representative) is the agent / representative duly authorized by _(Name of the bidder company)_ hereinafter called the Contractor to submit the attached bid to the _(Name of the Purchaser)_. Affiant further states that the said M/s (Bidding Firm/Company Name) has not paid, given or donate or agreed to pay, given or donate to any line officer or employee of the _(Name of the Purchaser)_ any money or thing of value, either directly or indirectly, for special consideration in the letting of the contract, or for giving undue advantage to any of the bidder in the bidding and in the evaluation and selection of the bidder for contract or for refraining from properly and thoroughly maintaining projects implementations, reporting violation of the contract specification or other forms of non-compliance.

_________________ Signature & Stamp

Subscribed and sworn to me this ________ day of _____ 20__

______________________________________________________ Notary Public

Page 56 of 60

Annexure-I TENDER SECURITY FORM WHEREAS [Name and Address of the Contractor] (hereinafter called "the Contractor") has submitted Tender against Tender Name/LOT No. ______ (hereinafter called "the Tender") to the [Name and Address of the Purchaser] (hereinafter called "the Purchaser") for the Total Tender Price of PKR (in figures ____________________) (in words ___________________________________). AND WHEREAS [Name of the Bank] having registered office at [Address of the Bank] (hereinafter called "the Guarantor") has agreed to give the Contractor a Guarantee; THEREFORE the Guarantor hereby affirms to bind himself, his successors and his assigns to the Purchaser, for the sum of PKR (in figures ____________________) (in words ___________________________________) and undertakes to pay to the Purchaser, upon receipt of his written demand(s), any sum(s) as specified by him, not exceeding the above limit in aggregate, without cavil / argument and without the Purchaser having to substantiate / prove or to show grounds / reasons for such claim(s), on the occurrence of any / all of the following conditions: 1. If the Contractor withdraws the Tender during the period of the Tender validity specified by the Contractor on the Tender Form; or 2. If the Contractor does not accept the corrections of his Total Tender Price; or 3. If the Contractor, having been notified of the acceptance of the Tender by the Purchaser during the period of the Tender validity, fails or refuses to furnish the Performance Security, in accordance with the Tender Document. Provided that the Purchaser shall specify the occurred condition(s) owing to which the said sum is due to him. Provided further that any demand(s) / claim(s) from the Purchaser shall reach the Guarantor within thirty working days after the expiry of the Guarantee. This guarantee shall remain valid up to ___________________ or until furnishing of the Performance Security, whichever is later. Date this ________________day of 2012. GUARANTOR Signature

__________________

CNIC # __________________ Name

__________________

Designation

__________________

Address

__________________

Page 57 of 60

Annexure-J PERFORMANCE SECURITY

Issuing Authority: Date of Issuance: Date of Expiry: Claim Lodgment Date:

WHEREAS [Name and Address of the Contractor] (hereinafter called "the Contractor") has agreed to supply the Goods and render the Services against Tender Name/LOT No. ______ (hereinafter called "the Contract") for the Contract Value of PKR (in figures ____________________) (in words ___________________________________). AND WHEREAS it has been stipulated in the Tender Document that the successful Contractor shall furnish Performance Security, within seven working days of the receipt of the Acceptance Letter from the Purchaser, in the form of a Bank Guarantee, issued by a scheduled bank operating in Pakistan, as per the format provided in the Tender Document or in another form acceptable to the Purchaser, for a sum equivalent to Rs.____________________(10% of the contract value) valid from the date of issue until all obligations have been fulfilled in accordance with the Contract; AND WHEREAS [Name of the Bank] having registered office at [Address of the Bank] (hereinafter called "the Guarantor") has agreed to give the Contractor a Guarantee; THEREFORE the Guarantor hereby affirms to bind himself, his successors and his assigns to the Purchaser, for the sum of PKR (in figures ____________________) (in words ___________________________________) and undertakes to pay to the Purchaser, upon receipt of his written demand(s), any sum(s) as specified by him, not exceeding the above limit in aggregate, without cavil / argument and without the Purchaser having to substantiate / prove or to show grounds / reasons for such claim(s), on the occurrence of any / all of the following conditions: 1. If the Contractor commits a default under the Contract; 2. If the Contractor fails to fulfill any of the obligations under the Contract; 3. If the Contractor violates any of the provisions of the Contract. Provided that the Purchaser shall specify the occurred condition(s) owing to which the said sum is due to him. Provided further that any demand(s) / claim(s) from the Purchaser shall reach the Guarantor within thirty working days after the expiry of the Guarantee. This guarantee shall remain valid up to ___________________ or until expiry of warranties or all obligations have been fulfilled in accordance with the Contract, whichever is later.

Page 58 of 60

Date this ________________day of 2012. GUARANTOR Signature

__________________

CNIC # __________________ Name

__________________

Designation

__________________

Address

__________________

Page 59 of 60

Annexure-K Financial Capacity of the Bidder Additionally, the following financial data form shall be filled out for the Bidder. The Purchaser reserves the right to request additional information about the financial capacity of the Bidder. A Bidder that fails to demonstrate through its financial records that it has the financial capacity to perform the required Supply/Services may be disqualified. Financial Information

Historical information for the previous three years (most recent to oldest in (PAK Rupees) Year (Year)

Year (Year)

Information from Balance Sheet: (1) Total Assets (TA) (2) Current Assets (CA) (3) Total Liabilities (TL) (4) Current (CL)

Liabilities

Information from Income Statement: (5) Total Revenue (TR) (6) Profits before Taxes (PBT) Net Worth (1) â&#x20AC;&#x201C; (3) Current Ratio (2) / (4) Provide information on current or past litigation or arbitration over the last three (3) years as shown in the form below. Litigation or arbitration in the last three (3) years: No:_____Yes:______ (See below) Litigation and Arbitration During Last three (3) Years Year

Matter in Dispute

Value of Award Against Contractor in PAK Rupees

_________________________ Authorized Signatures with Official Seal

Page 60 of 60

TENDER NOTICE No. CIIT/WD/220/01

SUPPLY OF OFFICE & CLASSROOMS FURNITURE Sealed tenders are invited from reputed, experienced NTN/GST registered furniture manufacturing firms for Supply of Office & Classroom Furniture at CIIT Islamabad. Tender details are given below: Detail of items, quantity & specifications: Estimated Cost of Tender:

Available in prescribed Tender Documents of CIIT

Bidding Procedure:

Single Stage-Two Envelopes as per PPRA rules

Tender Documents Cost:

Rs.2000/- in form of DD/Pay Order favouring CIIT Islamabad

Tender Documents Sale:

Up to 16 October 2012 at 1600 hrs by Purchase Officer CIIT

Amount of Earnest Money:

Tender Submission:

01% amount of total bid price (be attached with financial tender) in form of DD/Pay Order favouring CIIT Islamabad 11 October 2012 (Thursday) at 1130 hrs in Conference Room, 2nd Floor, Faculty Block-II, CIIT Islamabad 17 October 2012 at 1130 hrs in office of the Purchase Officer

Tender Opening:

17 October 2012 at 1200 hrs in public at Purchase Section CIIT Islamabad

Pre-bid Meeting:

06 Million

2. CIIT reserves the right to accept/reject any tender or cancel the tender process at any time as per PPRA rules. 3.

This tender notice is also available on PPRA website www.ppra.org.pk

PURCHASE OFFICER COMSATS Institute of Information Technology, Faculty Block-II, Park Road, Chak Shahzad, Islamabad Tel: 051-9247000-3 (Ext: 5039, 5040) Cell: 0333-5531126 Fax: 051-9247006

Zonal Office State Life Building Minara Road Sukkur –65200 Phone: 9310514-6 Fax No. 071-9310502 UAN No. 111-111-888

Tender Notice NO.06/2012 for Supply of Furniture/Fixture. Sealed financial bids are invited from National Tax registered firms/ suppliers preferably based at Sukkur for supply of items/ specifications mentioned here below. S # 01

Name of Item

Quantity

Visiting Chair

Revolving Chair

Office Table

Side Rack

Sofa Set five Seater Centre Table

Office Table

Specifications Visitor chair with arms Seat and Back with green lather solid seasond shesham wood with sprit polish. Revolving chair with arms Seat and Back with green lather made of iron having five legs with revolving base. (5x3X2/1/2) with three drawers, three side closed seasond shisham vineer board with sprit polish. (3x2/1/2X15”) with two shelves and two drawers all made Shisham vineer board with sprit polish. Sofa set with green lather seat and back made of molty foam with shesham wood. (36”X18”) made of shisham vineer board with sprit polish. (3x2.5X2/1/2) with one drawer, three side closed seasond shisham vineer board with sprit polish.

Terms and Conditions 1. Security Amount must be deposited equal to 5% of the total value of the Tender Cost by the bidders. 2. If the firm / supplier provides / supplies sub-standard product, the Security Deposit may be forfeited in favour of the Corporation. 3. The firm / supplier will be bound to supply the required items at, State Life Building Minara Road Sukkur, within prescribed time to be notified. 4. The bidders will have to attach copies of their NTN, GST Payer Number with the Tender. 5. Income Tax and GST or as per Government Policy will be deducted on the total value of the Tender. 6. No change will be acceptable in given specification of required items. Such bid(s) will be rejected. 7. The sealed quotations must be reached by Post / Courier / by hand to Secretary Zonal Procurement Committee, State Life

Insurance Corporation of Pakistan, Ground floor, State Life Building Minara Road, Sukkur up to 11:00 a.m. on 08.10.2012. The time of opening the bids before the Representatives of Firms / Suppliers will be 11:30 a.m. (Sharp) on same day, envelop must bear the â&#x20AC;&#x153;Quotation for Furnitureâ&#x20AC;? at its right corner for identification. 8. The State Life reserves the right to cancel any bid or bids assigning reason thereof. 9. Specimens are available in the office of the under singed and may be seen during office hours. (SECRETARY) Zonal Procurement Committee, State Life Insurance Corporation, of Pakistan, Zonal Office, (P&GS) Department, Ground Floor, State Life Building. Minara Road, Sukkur. Phone # 071-9310506

Tender Document

PROCUREMENT OF FURNITURE AND AFTER SALES SERVICES FOR GOVERNMENT OF PUNJAB’S TECHNOLOGY INCUBATOR

Page 4 of 60

Page 5 of 60

Invitation to Bid

As per Rule 36(b), Single Stage - Two Envelope Procedure shall be followed. This is as follows: i.

The bid shall comprise of a single package containing two separate envelopes. Each envelope shall contain separately the financial proposal and the technical proposal;

ii.

The envelopes shall be marked as “FINANCIAL PROPOSAL” and “TECHNICAL PROPOSAL” in bold and legible letters to avoid confusion;

iii.

Initially, only the envelope marked “TECHNICAL PROPOSAL” shall be opened;

iv.

The envelope marked as “FINANCIAL PROPOSAL” shall be retained in the custody of the procuring agency without being opened;

vi.

During the technical evaluation no amendments in the technical proposal shall be permitted;

vii.

The financial proposals of technically qualified bidders shall be opened publicly at a time, date and venue announced and communicated to the bidders in advance;

Page 6 of 60

viii.

Page 7 of 60

Bidding Details (Instruction to Bidders)

Page 8 of 60

Page 9 of 60

TERMS AND CONDITIONS OF THE TENDER 3.

Definitions

3.1 3.2

3.3 3.4

3.5

3.6 3.7

3.8 3.9 3.10

3.11 3.12 3.13

3.14

3.15 3.16 3.17 3.18

3.19

Page 10 of 60

3.22

Headings and Titles

3.20

3.21

Notice

5.1

5.1.1 5.1.2 5.1.3 5.1.4

Tender Scope

6.1

6.2

The execution will be carried out at 9th Floor Arfa Software Technology Park

6.3

Tender Eligibility

7.1 7.1.1 7.1.2 7.1.3

Page 11 of 60

7.1.4 7.1.5 7.1.6 7.1.7

Joint Venture/Consortium

9.1

9.1.5

10.

Examination of the Tender Document

9.1.1

9.1.2

9.1.3 9.1.4

The Tenderer is expected to examine the Tender Document, including all instructions and terms and conditions.

11.

Page 12 of 60

12.

Amendment of the Tender Document

12.1

12.2 12.3

13.

Preparation / Submission of Tender

13.1 13.2 13.3

13.4

13.5

13.6

Page 13 of 60

13.8 13.8.1 13.8.2 13.8.3

13.9

13.10

13.11

The Tenderer shall follow the same process for the Financial Tender.

13.12 The Tenderer shall again seal the sealed envelopes of Original Technical Proposal and the Original Financial Proposal in an outer envelope, duly marking the envelope as under:

Page 14 of 60

13.15 13.16

Page 15 of 60

14.

Tender Price

15.

Tender Security

15.1 15.2 15.2.1 15.2.2

15.2.3

15.2.4 15.2.5 15.2.6 15.3 15.3.1 15.3.2 15.3.3

15.4

Page 16 of 60

16.

17.

Modification / Withdrawal of the Tender

17.1

17.2

18.

Opening of the Tender

18.1

18.2

18.3

19.

20.

Determination of Responsiveness of the Bid (Tender)

20.1

20.1.1 20.1.2 20.1.3 20.1.4 20.1.5 20.1.6 20.1.7 20.1.8

Page 17 of 60

21.

PARAMETERS OF TECHNICAL EVALUATION CRITERIA

Description

Points

Certificate of Registration

Mandatory

Income Tax Registration

Mandatory

General Sales Tax Registration

Mandatory

Undertaking that the firm is not blacklisted and involved in litigation with Government

Mandatory

Financial / Experience Annual net turnover (Max Points 100)

10-15 million

10 Points

16-30 million

20 Points

31-40 million

30 Points

41-50 million

60 Points

Page 18 of 60

51-60 million

80 Points

61 million or above

100 Points

Audited Financial Reports (Max Points 75)

For the past 3 years

25 Points for each year

Income tax returns (Max points 75)

For the past 3 years

25 points for each year

Number of Similar Corporate Projects Successfully Deployed

20 Projects

5 Points for Each Successful Project

Cost of projects (supply of furniture on turnkey basis to corporates / companies) in the past 3 years

5-10 million

11-15 million

(Max Points 100)

16-25 million

26 million or above

100

10-20

20 Points

21-30

40 Points

31-40

60 Points

41-50

80 Points

51 or above

100 Points

>4 weeks

0 points

3 – 4 weeks

50 points

2– 3 weeks

75 points

Within 2 weeks

100 points

Projects (Max Points 100)

Human Resource

Total No of employees (Max Points 100)

Less than 1 year

0 points

1 – 3 years

50 points

3 years or more

100 points

Page 19 of 60

22.

Correction of errors / Amendment of Tender

23.

Rejection / Acceptance of the Tender

23.1

23.2 23.2.1 23.2.2 23.2.3 23.2.4 23.2.5 23.2.6 23.2.7

Page 20 of 60

24.

Award Criteria

24.1.

24.2.

25.

26.

Performance Security

26.1

26.1.1 26.1.2 26.1.3 26.1.4 26.1.5 26.2 26.2.1 26.2.2 26.2.3 26.3

27.

Redressal of grievances by the procuring agency

27.1

27.2

Page 21 of 60

27.3 27.4 27.5

Page 22 of 60

TERMS & CONDITIONS OF THE DRAFT CONTRACT

Contract Title:

Contract for PROCUREMENT OF FURNITURE AND AFTER SALES SERVICES FOR GOVERNMENT OF PUNJAB’S TECHNOLOGY INCUBATOR

between

Punjab Information Technology Board (PITB)

and

[name of Contractor]

Dated:

Page 23 of 60

TABLE OF CONTENTS

Technical Specifications

Page 24 of 60

Agreement

The Tender Document Bidder’s Proposal Terms and Conditions of the Contract Special Stipulations The Technical Specifications

Page 25 of 60

f. g. h. i. j. k. l. m.

4. This Contract shall prevail over all other documents. In the event of any discrepancy / inconsistency within the Contract, the above Documents shall prevail in the order listed above.

For [full legal name of the Contractor]:

Signature

Name

Witnessed By:

WITNESSES Signature __________________ CNIC # __________________ Name __________________ Designation__________________ Address _________________

Signature ____________________ CNIC # ____________________ Name ____________________ Designation ____________________ Address __________________

Page 26 of 60

II General Conditions of Contract 28.

29.

30.

31.

Standards The Goods supplied and the Services provided under this Contract shall conform to the authoritative latest industry standards.

32.

33.

34.

35.

Page 27 of 60

36.

37.

38.

Delivery

38.1

38.2 38.3

38.4

39.

Installation and Implementation

39.1

39.2

Page 28 of 60

39.3 39.4 39.5 39.6

39.7

40.

Site Preparation

40.1

40.2

41.

Spare Parts and Support

41.1

42.

Inspection and Testing

42.1

42.2

Page 29 of 60

42.3

42.4

42.5

43.

Taking-Over Certificate

43.1

43.2

43.3

44.

Warranty

44.1

Page 30 of 60

44.8

45.

46.

Defects Liability Expiry Certificate

46.1

46.2

47.

Payment

47.1

47.2

47.3

48.

49.

Contract Amendment

49.1

The Purchaser may, at any time, by written notice served on the Contractor, alter, amend, omit, increase, decrease or otherwise change the nature, quality, quantity and scope, of all / any of the

Page 31 of 60

49.2

49.3 49.4 49.5

50.

Assignment / Subcontract

50.1

50.2

51.

52.

53.

Blacklisting

53.1

53.2

Page 32 of 60

54.

55.

Termination for Default

55.1

55.2

56.

57.

Termination for Convenience

57.1

58.

Force Majeure

58.1

Page 33 of 60

58.2

58.3

59.

Dispute Resolution

59.1

59.2

60.

Statutes and Regulations

60.1 60.2

60.3

61.

62.

Contract Cost The Contractor shall bear all costs / expenses associated with the preparation of the Contract and the Purchaser shall in no case be responsible / liable for those costs / expenses.

63.

The Client

63.1

63.2 63.3

Page 34 of 60

responsibilities assigned thereto in a timely manner.

64.

Authorized Representative

64.1

64.2 64.3 64.4 64.5

64.6

65.

66.

Training

66.1

66.2

67.

68.

Special Stipulations

SCHEDULE-A, SPECIAL STIPULATIONS For ease of Reference, certain special stipulations are as under: Tender Security

The Contractor shall furnish the Tender Security as under:

Page 35 of 60

Delivery Period

Within four (04) weeks from the issuance of acceptance letter.

Liquidated damages for failure / delay in supply / installation / configuration of Goods / Services / Works by the Contractor

Page 36 of 60

Annexure-A

Page 37 of 60

BOQ along with Specifications LOT .# A

Item Description

Size

Specification

Image

Qty

Unit

W:1200 mm D:600 mm

160

Nos.

Design as per image

MEDIUM BACK. SEAT & BACK UPHOLSTERED WITH BEST QUALITY FOAM & FABRIC WITH ARMS IN PP.REVOLVING, RECLINING AND HYDLROIC SYSTEMS WITH 5 STAR PEDESTAL PU BASE.

Nos

INCUBATION ROOM FURNITURE :

WORKSTATIONS / WORKBENCHES (for 2 persons)

CHAIRS

CONFERENCE TABLES (for 6 persons)

CHAIRS

STAFF OFFICES:

MANAGER’S DESKS

H: 760mm W: 1650mm D: 900mm

H: 760mm W: 1520mm D: 760mm

TABLE FOR 06 PERSONS WITH OVER ALL STURCTURE MADE OF MS POWDER COATED. TOP MADE OF THICK LAMINATED BOARD WITH WITH MATCHING PVC EDGING. NORMAL LEGS.

Nos.

VISITOR MEDIUM BACK (OVER ALL STRUCTURE MADE OF ARMS IN SOLID WOOD + UPHOLSTRY WITH BEST QUALITY FOAM & LEATHRITE + M.S PIPE POWDER COATED. POLISH FINISH.

Nos

TOP & VANITY PANEL MADE OF LAMINATED BOARD WITH METAL BASE AT BOTH SIDES OF THE TABLE DULY POWDER COATED.

Nos

Page 39 of 60

DRAWER PADESTAL

BASE CABINET (SMALL)

Design as per image

Nos

H: 825mm W: 1000mm D: 425mm

OVERALL STRUCTURE MADE OF LAMINATION BOARD WITH MATCHING PVC EDGING. WITH SS HANDLES. LOCK & KEY FOR BOTH DOORS. INTERNAL STORAGE FOR BOX FILES, TWO ADJUSTABLE SHELVES BOTH SIDES.

Nos

Page 40 of 60

BASE CABINET (MEDIUM)

MANAGER CHAIRS (HIGH BACK)

H: 1200mm W: 1000mm D: 425mm

OVERALL STRUCTURE MADE OF LAMINATION BOARD WITH MATCHING PVC EDGING. WITH SS HANDLES. LOCK & KEY FOR BOTH DOORS. INTERNAL STORAGE FOR BOX FILES, AT LEAST THREE ADJUSTABLE SHELVES BOTH SIDES.

Nos

Design as per image

HIGH BACK. SEAT & BACK UPHOLSTERED WITH BEST QUALITY FOAM & FABRIC WITH ARMS IN PP.REVOLVING, RECLINING AND HYDLROIC SYSTEMS WITH 5 STAR PEDESTAL PU BASE.

Nos

Page 41 of 60

VISITOR’S CHAIRS

EXECUTIVE ROOMS AND CONFERENCE ROOM:

EXECUTIVE TABLES

Design As per Image

MEDIUM BACK. SEAT & BACK UPHOLSTERED WITH BEST QUALITY FOAM & FABRIC WITH ARMS IN PP. NON RECLINING WITH NON REVOLVING BASE.

Nos

H: 760mm W: 1800mm D: 900mm

Nos.

Page 42 of 60

EXECUTIVE SIDE RACK

CONFERENCE TABLE FOR 08 PERSONS

H: 760mm W: 1200mm D: 550mm

Nos.

H:760 mm W:2400 mm D:1200 mm

Nos

Page 43 of 60

EXECUTIVE CHAIRS

Design as per image

COAT HANGER STAND

Design as per image

COMPLETELY MADE OF SOLID WOOD, POLISH FINISH. WOOD - BEECH, POLISH - JACOBEAN

Nos

Page 44 of 60

EXECUTIVE VISITOR CHAIRS

SOFAS (SINGLE SEATER)

SOFAS (TWO SEATER)

Design as per image

STRUCTURE MADE UP OF SOLID BEECH WOOD AND ARMS MADE UP OF MS PIPE POWDER COATED. SEAT & BACK UPHOLSTERED WITH BEST QUALITY FOAM & BLACK LEATHERITE.

Nos.

H: 660mm W: 760mm D: 785mm

FULLY UPHOLSTERED WITH BEST QUALITY FOAM AND LEATHERITE WITH M.S. PIPE POWDER COATED FRAME AND LEGS. BASE SHOULD BE MADE UP OF M.S PIPE WITH CHARCOAL GREY POWDER COATING.

Nos.

W: 1600mm H: 660mm D: 785mm

FULLY UPHOLSTERED WITH BEST QUALITY FOAM AND LEATHERITE WITH M.S. PIPE POWDER COATED FRAME AND LEGS. BASE SHOULD BE MADE UP OF M.S. PIPE WITH CHARCOAL GREY POWDER COATING.

Nos.

Page 45 of 60

CENTER TABLE

Design as per image

SIDE TABLE

Design as per image

CLASS ROOM AND DINING AREA:

CHAIR TABLET ARM

Design As per Image

SEAT AND BACK SHOULD BE IN BEST QUALITY BLACK FIBRE. FRAME OF CHAIR SHOULD BE IN IN CHROME FINISH. WITH TABLET.

Nos.

Page 46 of 60

WHITE BOARD WITH STAND

TABLE FOR DINING AREA / RECREATION ROOM (for 6 persons)

CHAIRS FOR DINING AREA / RECREATION ROOM and ADMIN ROOM

6ft. X 3ft.

OVERALL STRUCTURE SHOULD BE MADE UP OF WHITE LAMINATION ALONG WITH PROVISION OF A STAND AND DUSTER TRAY.

H: 760mm W: 1650mm D: 900mm

TABLE FOR 06 PERSONS WITH OVER ALL STURCTURE MADE OF MS POWDER COATED. TOP MADE OF THICK LAMINATED BOARD WITH WITH MATCHING PVC EDGING. NORMAL LEGS.

VISITOR MEDIUM BACK (OVER ALL STRUCTURE MADE OF ARMS IN SOLID WOOD + UPHOLSTRY WITH BEST QUALITY FOAM & LEATHRITE + M.S PIPE POWDER COATED. POLISH FINISH.

Nos.

Page 47 of 60

H: 1200mm W: 1000mm D: 425mm

Nos

BASE CABINET (MEDIUM) FOR STORING CROCKERY, etc.

RECREATION ROOM

FOOSE BALL TABLE

As per image

Wooden table with 8 rods as per image, without glass top

Nos.

BEAN BAGS

As per image

Leatherite covered bean bags stuffed with ball fiber, various colors, as per image

Nos.

Page 48 of 60

Annexure-B Technical Proposal Submission Form [Location, Date] To (Name and address of Client / Purchaser)_

We understand you are not bound to accept any Proposal you receive.

We remain, Yours sincerely, Authorized Signature (In full and initials) Name and Designation of Signatory Name of Firm Address

Annexure-C Financial Proposal Submission Form (Part of Financial Bid Envelope) [Location, Date]

(Name and address of Client / Purchaser)_

We understand you are not bound to accept any Proposal you receive.

Signed In the capacity of: Duly authorized to sign the proposal on behalf of the Applicant. Date:

Page 50 of 60

Annexure-D Price Schedule/ Financial Cost Sheet for Each or All LOT(s) the bidder is applying for

S.No.

Item Description

Units

Price per unit (Excluding all taxes)

Total Taxes

Unit Price (Including all taxes)

Total Cost (No. of units x unit cost) (including all taxes) X

X will determine the total bid cost Total Cost (in words) Rs. ________

Date ___________ Place __________ Signature of authorized person Name:

(Company Seal)

__________________ In the capacity of Dully authority by

Note: No cutting or overwriting is allowed. Any cutting or overwriting will lead to rejection of the financial bid.

Page 51 of 60

Annexure-E Format for Covering Letter

To (Name and address of Purchaser)

Sub:

________________________________________________.

_________________________ Authorized Signatures with Official Seal

Page 52 of 60

Annexure-F INSTRUCTION FOR PREPARATION OF POWER OF ATTORNEY

Page 53 of 60

Dated this _____ day of ____________________ 20__

For ________________________________

(Signature) (Name, Designation and Address) Accepted

(Signature) (Name, Title and Address of the Attorney) Date:

Page 54 of 60

Dated this _____ day of ____________________ 20__

Signature

(Company Seal) __________________ In the capacity of

Duly authorized to sign bids for and on behalf of:

Page 55 of 60

_________________ Signature & Stamp

Subscribed and sworn to me this ________ day of _____ 20__

______________________________________________________ Notary Public

Page 56 of 60

__________________

CNIC # __________________ Name

__________________

Designation

__________________

Address

__________________

Page 57 of 60

Annexure-J PERFORMANCE SECURITY

Issuing Authority: Date of Issuance: Date of Expiry: Claim Lodgment Date:

Page 58 of 60

Date this ________________day of 2012. GUARANTOR Signature

__________________

CNIC # __________________ Name

__________________

Designation

__________________

Address

__________________

Page 59 of 60

Historical information for the previous three years (most recent to oldest in (PAK Rupees) Year (Year)

Year (Year)

Information from Balance Sheet: (1) Total Assets (TA) (2) Current Assets (CA) (3) Total Liabilities (TL) (4) Current (CL)

Liabilities

Matter in Dispute

Value of Award Against Contractor in PAK Rupees

_________________________ Authorized Signatures with Official Seal

Page 60 of 60

COMSATS Institute of Information Technology Sahiwal Campus COMSATS Road , Off G.T. Road Sahiwal

Tender Notice No.CIIT-SWL/PUR-022

CIIT SAHIWAL 1. COMSATS Institute of information Technology (CIIT), Sahiwal Campus intends to purchase furniture and fixture for Computer and electronics lab.

2. Sealed tenders are invited from reputed GST registered firms for the above items. The tender document containing detailed specifications & quantity of the required items can be obtained from the office of the undersigned upon payment of Rs. 1000/(Non-refundable) in the form of pay order/Bank draft in the name of CIIT Sahiwal during office hours on any working day from 24-09-2012 to 9-10-12. 3. The tender completed in all aspects should reach this office latest by 09-10-12 at 1100 hours along with 2 % earnest money of the quoted cost in the form of Pay Order/Bank Draft in the name of COMSATS Institute of Information Technology, Sahiwal. The tender will be opened on the same day at 1130 Hours in public. 4. The acceptance or rejection of all the proposals or bids shall be based on the criteria mentioned in tender document.

Purchase Officer COMSATS Institute of Information Technology COMSATS Road , Off G.T. Road Sahiwal, Sahiwal

040-4305001-3Fax # 040-9200102 info@ciitsahiwal.edu.pk

Benefits of Maven Tenders A subscription to Maven will ensure your organization has access to the latest tenders being called by all levels of Government along with the private and public sectors. As the smartest provider of tender opportunities in the Pakistan market, Maven lead the way in ensuring all relevant tenders for your business are captured and distributed to you in a timely manner. Our capture rates (finding what tenders are available in the market) are considered the best available. What are you currently missing out on?

There are many good reasons to subscribe to a tender notification service. Think of your subscription as an investment, an investment that will more than pay for itself when you win new business called through the tender process. Even if you already have a tender notification provider, having two subscriptions will ensure nothing slips through the net. If you buy your local newspaper and check the tenders advertised column yourself, and this suffices for your business, then you probably don't need our services. However if you are serious about winning new business through the complete capture of all relevant tenders for your business, then a subscription to Maven will deliver.

The following pages outline the main benefits of using our service. Complete Coverage: Maven is your single source. 95% of all publicly advertised tenders in Pakistan pass through our system. We are the only tender notification company that provides customized service. Our research team are highly experienced in hunting down the latest tenders, and our daily media search extends to printed media such as newspapers, trade journals and industry magazines. We also search known industry websites for new tenders being published including all levels of government, councils, and corporate procurers. Rest assured, we know all the sources of tenders and they know us! Benefit to you Your organization receives the widest possible coverage. When you subscribe to Maven you can be assured that all tenders are being captured that are relevant to your business, and that nothing is being missed. You need confidence in this area. Relevancy: We realise the importance of ensuring you only receive tenders that are relevant to your business and industry. Time is precious

and we also understand that you are very busy in your day-to-day work. That is why we have developed an industry matching system that ensures accuracy and relevancy to your specific needs. With many industry categories available, you pick and choose which categories you require tenders from. We also provide keyword profile matching for the most highly targeted matches. Benefit to you You spend less time searching and filtering for tenders in the market and more time running your business. Only receive tenders that are of direct interest to you, and only tenders you are capable of responding to. We keep it quick and simple! Timeliness: We guarantee to have a minimum of 95% of all publicly available tenders to you within 24 business hours of publication. If a tender is published in a newspaper or website today, and it matches your profile, we will send that to you within one business day usually Benefit to you You receive notification in a timely and efficient manner. The earlier the notification to you the more time you have to prepare and respond. With tight closing times becoming the norm, you need to receive notification of tenders at the earliest point possible!

Many of our clients claim that this benefit alone saves them the equivalent of our annual subscription costs! Users: You can have up to five users under your subscription. So if you have a branch network or multiple offices, five people within your business can receive or access tenders we publish. This is useful when each of your branches require tenders for their own region, or where your business has different operating divisions. Benefit to you A subscription can be set-up with 5 users in your organization. Each user can have access to Maven and can receive tenders via email. This means tenders being captured can easily be distributed to your staff or colleagues based on their location or the division they work in.