DOWNCITY DESIGN SUMMER DCD DESIGN BUILD
2015 - 2016
MAINTANCE DISCLAIMER: This guide will be your resource for the details of your project. Materials, parts, fasteners and care will be detail in the follwoing guide. Please refer to this guid to troubleshoot any issues that may arise from the maintance of your DCD prject.
MAINTANCE DISCLAIMER:
Table of Contents:
This guide will be your resource for the details of your project. Materials, parts, fasteners and care will be detail in the follwoing guide. Please refer to this guid to troubleshoot any issues that may arise from the maintance of your DCD prject.
1. Materials & Matanance
2-5
2. Hardware
4-6
3. Fasteners
10-12
MATERIALS: The ollowing list is the materials used in your project and thre location. Each material type has a n expected logevity whih will be listed below.
ID MATERIAL NAME:
LONGEVITY:
1
2” x 4” Pressure Treated Board
5 - 10+ Years
2
2” x 6” Pressure Treated Board
5 - 10+ Years
3
2” x 10” Pressure Treated Board
5 - 10+ Years
4
2” x 12” Pressure Treated Board
5 - 10+ Years
5
6” x 6” Presseure Treated Post
5 - 10+ Years
6
12” Quik-Tube Foundation
10+
1. 2” x 4” 4. 2” x 12”
6. 6” x 6”
1. 2” x 4” 2. 2” x 6” 3. 2” x 10” 5. 6” x6” Post 6. 12” Quik-Tube Foundation
6
MET + ELLERY ST. PARK
MAINTANANCE OF MATERIALS:
HARDWARE:
1. PRESSURE TREATED WOOD:
ID MATERIAL NAME:
REQUIRED FASTENER:
1
2.5” Structural Screw
If treated properly pressure treated wood can easily last upwards of 10+ years. This will require regular maintance. If your structure has not been sealed this will be the first step to assuring its longevity. Follow the steps below:
The allowing list is the hardware used in your project and thre location.
Simpson PBS66HDG Standoff Post Base 6x6HDG
Within 30 days apply a sealant to the wood (paint, stain, or water sealant) and re-applied per manufacturers requirements.
2. CONCRETE FOOTINGS: Concrete footsings should be checked regularyly. If there are cracks or fissures forming it will cause the structure to become unstable and should be checked for safety. If the footings is unstable it should be removied and repoured. Quikrete: Comcrete Mix (4000 PSI) Quik-Tube: 12” @ 4’ deep
1
Post Base Diagram
3. REBAR: All rebar in this project is within the concrete quicktubes and will not need maintance.
3. NETTING All rebar in this project is within the concrete quicktubes and will not need maintance.
8
MET + ELLERY ST. PARK
FASTENERS: The ollowing list is the materials used in your project and thre location. Each material type has a n expected logevity whih will be listed below.
ID FASTENER NAME:
REQUIRED BIT:
1
Phillips Head Driver
Grip Rite 2 1/2” Exterior Wood Screws Location: Used to fasten 2”x4” to structure
2
6” Simpson .22” Structural Screws
T40 Star Driver
Location: Used to fasten all 2” boards to structure. 3
2.5” Simpson .25” Structural Screws
3/8” Hex Driver
Location: Used to fasten posts to post bases. 4
1” Galvanized 10-D Common Nails
N/A
Location: Used to fasten joists hangers to ridge beam.
10
MET + ELLERY ST. PARK