The Jennifer Ruched Cap
Ruched Cap Sewing Instructions www.mchats.etsy.com
Ruched side 6 sectional sewing hat pattern Step 1 Cut out all pattern pieces, from the paper they are supplied on. Place onto your fabric, and following the outside line cut out each piece.
Step 4 Iron open the seams that you have just sewn so that they lay flatly on the outside
1
4
Step 2 Interface the back of the fabric with a light interfacing, if you require more body in your hat.
Step 5 Topstitch on the outside if you want to hold the seams in place or for appearance sake
5
2 Step 3 Sew together the two crown pattern pieces named “front�.
3 www.mchats.etsy.com
Step 6 fold the side piece in half and iron a crease mark right down the centre. This will be your guideline for gathering it up with a loose stitch on your machine
6 ruched cap pattern instructions
10 7 side pattern piece ironed in half, then do a loose machine gathering stitch so that you may gather the piece up to match the length of the front piece you will attach it to
Ruched side piece attached to front piece. I have made some small pleated folds in the side to match the length of the front and for a nice finish on the outside
8
Gathering up the ironed creased mark
11
9 Stitch the gathers into place then on outside place a line of stitching to hold gathers in place
12 you will then adjust the gathers to your liking matching the length of the piece you are attaching the ruched fabric to.
www.mchats.etsy.com
ruched cap pattern instructions
13 row of stitched placed on to the outside gathers to hold them permanently in place
14
15 sew the ruched side panel to the back panel once again adjusting the gathers
16 Fold 2nd side panel in half and iron again to get the crease mark to gather up again and join to the already sewn up hat.
Iron seams open to get a good finish on the outside. Topstitch if you prefer
17
www.mchats.etsy.com
ruched cap pattern instructions
Pleats and gathers evenly on each side of the
22
18 the other ruched side of the cap gathered and adjusted with small pleats and sewn to
Topstitch on lower edge of hat band
19 cut out hat band pieces x 2
20 stiffen hat band pieces and sew together then sew to bottom edge of
sew hat band to the bottom edge of the hat
21
23
Stitch in the ditch the hat band up on to the main hat to hold it in place
24 Cut out 2 pieces of fabric for the hat brim piece
www.mchats.etsy.com
ruched cap pattern instructions
28
25
I put 2 layers of interfacing on the back side of my peak pattern piece
Fold the peak piece in half and make a small fold crease down the centre
26
29
Folded crease matched to the centre front of hat
Sew the pattern peak pieces together then turn to the right side out and iron it into a good shape
27
after matching the folded centre of the peak to the centre front of the pin into place in preparation for sewing
30 I topstitched my peak piece with 4 rows of topstitching, (optional) 2 rows looks good
www.mchats.etsy.com
ruched cap pattern instructions
31
34
Stitch peak to hat with 1/4� seam allowance
32
Cut out lining pattern pieces 3 x double sided - 6 pieces in total
Hole in the lining back seam which hat will be turned through to the right side out at a later stage
35
33
you now have to sections of 3 pieces each of the lining fabric, that you will place together & sew right over the top sew up three pieces of the lining fabric following the seam allowances given
36
With the other 3 pieces of the lining section you need to leave a small hole opening in the back seam for which you turn the hat to the right side out through the hole when the hat is completed - see the following photograph www.mchats.etsy.com
ruched cap pattern instructions
40
37 sewing acrosss the top of the two lining pieces. Start at one end and sew accross the top to the other end.
2 hat pieces sewn together
38 41 Now turn the hat to the right side out through the hole Put 2 right sides of fabric together the lining and the main hat
42 39 Match all the seams from the main hat and the lining, pin together then you will sew all around the bottom following the seam allowance and then the hat will be turned right side out through the hole you left previously in the back seam of the lining fabric www.mchats.etsy.com
On the right side, machine up the hole in the back seam. Adust your hat on the right side out and iron well for a good finish apply a button or flower or whatever trim takes your fancy on the outside of the hat.
ruched cap pattern instructions
I put a scrap of fabric under my zipper flower, then attached the flower to the patch, then machine stitched it to the hat, it gave extra reinforcement and held the brim band in place, as well as making it easier to attach to the hat
www.mchats.etsy.com
ruched cap pattern instructions