Discover the Possibilities ®
SOLBERG
INLET FILTER ASSEMBLIES/ EXPOSED FILTERS TABLE OF CONTENTS
1/2” to 3” MPT
pg. 2
3” to 6” MPT 4” to 6” FLG
pg. 3 pg. 4
8” to 14” FLG
pg. 5
Compact Big Boy
Exposed/Open Filters: Very cost effective filtration solution. Element is exposed for optimal airflow and minimal pressure drop. Industrial, Severe & Extreme duty models in stock. Stainless Steel filters available. ● FT Series: Small Compact 1/2” to 3” MPT pg. 6 Compact 3” to 6” MPT pg. 7 4” to 6” FLG pg. 8 Big Boy 8” to 14” FLG pg. 9 SpinMeister™ Extreme Duty Filter Assemblies: Ideal for highly dirty areas when a precleaner is combined with an inlet filter. ● SM Series pg. 10 Replacement Parts/Accessories
pg. 11
Replacement Filter Elements
pg. 12
Bulletin FA-160
Visit Solberg on the Web: WWW.SOLBERGMFG.COM
F, FT, SpinMeister Series
● F Series: Small Compact
FILTER ASSEMBLIES
Filter Assemblies: Durable weatherproof housings and ample surface area provide long lasting filtration. Industrial, Severe & Extreme duty models in stock. Stainless Steel filters available.
Small Compact Inlet Filters "F" Series 1/2” - 3” MPT ®
APPLICATIONS & EQUIPMENT Industrial & Severe Duty Piston Compressors Screw Compressors Blowers - Side Channel & P.D. Hydraulic Breathers – fine filtration
Waste Water Aeration Sparging
Engines Construction\Contractor Industry Workshop Medical\Dental Industry Pneumatic Conveying
F, FT, SpinMeister Series
FILTER ASSEMBLIES
FEATURES & SPECIFICATIONS Polyester: 99%+ removal efficiency standard to 5 micron Paper: 99%+ removal efficiency standard to 2 micron Fully drawn weatherhood - no welds to rust or vibrate apart Low entry velocity air gap between base and cover Center bracket located for minimal flow restriction Heavy gauge base with low pressure drop outlet pipe design Durable carbon steel construction with baked enamel finish and powder coated weatherhood
Interchangeable media: Polyester, Paper, HEPA Several element sizes available per given connection (safety factor) Temp (continuous): min -15°F (-26°C ) max 220°F (104°C ) Filter change out differential: 10”-15” H2O over initial delta P Pressure drop graphs available upon request
OPTIONS (Inquiries Encouraged) 1/8” tap holes Pressure Drop Indicator
Available in Stainless Steel Epoxy coated housings
CONFIGURATION
Various media available Special connections, BSPT
DRAWING
I = Industrial Duty S = Severe Duty
Dimension tolerance + 1/4”
Rated Flow SCFM with Polyester Element
I I I S I I I S I S I
F-15-050 F-15-075 F-15-100 F-19P-100 F-19P-125 F-19P-150 F-31P-200 F-231P-200 F-31-250 F-231P-250 F-231P-300
with Paper Element
F-14-050 F-14-075 F-14-100 F-18P-100 F-18P-125 F-18P-150 F-30P-200 F-230P-200 F-30-250 F-230P-250 F-230P-300
DIMENSIONS - inches MPT Outlet
A
B
C
1/2" 3/4" 1" 1" 1 1/4" 1 1/2" 2" 2" 2 1/2" 2 1/2” 3”
4 4 4 6 5/8 6 5/8 6 5/8 7 1/4 12 1/4 7 1/2 12 1/2 13
1 1/2 1 1/2 1 1/2 1 5/8 1 5/8 1 5/8 2 1/4 2 1/4 2 1/2 2 1/2 3
6 6 6 6 6 6 7 3/4 10 7 3/4 10 10
Note: Model offerings and design parameters may change without notice.
Element Rating
Approx. Wt. lbs
10 20 25 35 55 70 85 135 100 195 300
10 25 35 55 70 85 135 135 195 195 300
35 35 35 100 100 100 195 300 195 300 300
1.5 1.7 2 3 3 3 4.7 12 5.5 13 14
1151 Ardmore Ave. Itasca, IL 60143 USA Sales/Service: 630.773.1363 Fax: 630.773.0727 E-mail: sales@solbergmfg.com Web Site: www.solbergmfg.com
Solberg – Discover the Possibilities
F14-306
Piston
Screw, Blower, Fan
pg. 2
Compact Inlet Filters "F" Series 3” - 6” MPT ®
APPLICATIONS & EQUIPMENT Industrial & Severe Duty Blowers - Side Channel & P.D. Piston Compressors Screw Compressors Hydraulic Breathers – fine filtration
Waste Water Aeration Sparging Factory Air
Engines Fans Construction Industry Medical Pneumatic Conveying
FEATURES & SPECIFICATIONS
OPTIONS (Inquiries Encouraged) 1/8” tap holes Pressure Drop Indicator
Available in Stainless Steel Epoxy coated housings
CONFIGURATION
Various media available Special connections, BSPT
DRAWING
I = Industrial Duty S = Severe Duty E = Extreme Duty
Dimension tolerance + 1/4”
Rated Flow SCFM with Polyester Element
S S E I S E I S I
F-235P-300 F-245P-300 F-275P-300 F-235P-400 F-245P-400 F-275P-400 F-245P-500 F-275P-500 F-275P-600
with Paper Element
F-234P-300 F-244P-300 F-274P-300 F-234P-400 F-244P-400 F-274P-400 F-244P-500 F-274P-500 F-274P-600
DIMENSIONS - inches MPT Outlet
A
B
C
3" 3" 3" 4" 4" 4" 5" 5" 6"
13 13 13 14 14 14 14 14 15
3 3 3 4 4 4 4 4 5
10 16 16 10 16 16 16 16 16
Note: Model offerings and design parameters may change without notice.
Element Rating
Approx. Wt. lbs
300 300 300 300 450 450 500 650 650
300 300 300 520 520 520 800 800 1100
570 880 1100 570 880 1100 880 1100 1100
15 21 24 15 22 26 23 27 29
1151 Ardmore Ave. Itasca, IL 60143 USA Sales/Service: 630.773.1363 Fax: 630.773.0727 E-mail: sales@solbergmfg.com Web Site: www.solbergmfg.com
Solberg – Discover the Possibilities
F24-306
Piston
Screw, Blower, Fan
pg. 3
F, FT, SpinMeister Series
Several element sizes available at a given connection size providing a choice according to the severity of your application Temp (continuous): min -15°F (-26°C ) max 220°F (104°C ) Filter change out differential: 10”-15” H2O over initial delta P Pressure drop graphs available upon request
FILTER ASSEMBLIES
Polyester: 99%+ removal efficiency standard to 5 micron Paper: 99%+ removal efficiency standard to 2 micron Heavy gauge base with low pressure drop bracket and outlet pipe design Fully drawn weatherhood - no welds to rust or vibrate apart Durable carbon steel construction with baked enamel finish and powder coated weatherhood Low entry velocity air gap between base and cover Interchangeable media: Polyester, Paper, HEPA
Compact Inlet Filters "F" Series 4” - 6” 125/150# Pattern Flange ®
APPLICATIONS & EQUIPMENT Industrial & Severe Duty Blowers - Side Channel & P.D. Piston Compressors Screw Compressors Hydraulic Breathers – fine filtration
Waste Water Aeration Sparging Factory Air
Engines Fans Construction Industry Medical Pneumatic Conveying
F, FT, SpinMeister Series
FILTER ASSEMBLIES
FEATURES & SPECIFICATIONS Polyester: 99%+ removal efficiency standard to 5 micron Paper: 99%+ removal efficiency standard to 2 micron Heavy gauge base with low pressure drop bracket and outlet pipe design Fully drawn weatherhood - no welds to rust or vibrate apart Durable carbon steel construction with baked enamel finish and powder coated weatherhood Low entry velocity air gap between base and cover Interchangeable media: Polyester, Paper, HEPA
Several element sizes available at a given connection size providing a choice according to the severity of your application Temp (continuous): min -15°F (-26°C ) max 220°F (104°C ) Filter change out differential: 10”-15” H2O over initial delta P Pressure drop graphs available upon request
OPTIONS (Inquiries Encouraged) Available in Stainless Steel Epoxy coated housings
1/8” tap holes Pressure Drop Indicator
CONFIGURATION
Various media available Special connections, BSPT
DRAWING
I = Industrial Duty S = Severe Duty E = Extreme Duty
Dimension tolerance + 1/4” Rated Flow SCFM
with Polyester Element
I S E I S I
F-235P-400F F-245P-400F F-275P-400F F-245P-500F F-275P-500F F-275P-600F
125/150# Pattern Flg 4" 5" 6"
with Paper Element
F-234P-400F F-244P-400F F-274P-400F F-244P-500F F-274P-500F F-274P-600F
DIMENSIONS - inches O.D. B.C. B.H. 9 7 1/2 0.75 10 8 1/2 0.88 11 9 1/2 0.88
DIMENSIONS - inches MPT Outlet
A
B
C
4" 4" 4" 5" 5" 6"
14 14 14 14 14 15
4 4 4 4 4 5
10 16 16 16 16 16
No. of Holes 8 8 8
Flange Thickness 0.38 0.38 0.38
Note: Model offerings and design parameters may change without notice.
Element Rating
Approx. Wt. lbs
300 450 450 500 650 650
520 520 520 800 800 1100
570 880 1100 880 1100 1100
20 27 31 27 32 34
1151 Ardmore Ave. Itasca, IL 60143 USA Sales/Service: 630.773.1363 Fax: 630.773.0727 E-mail: sales@solbergmfg.com Web Site: www.solbergmfg.com
Solberg – Discover the Possibilities
F34-306
Piston
Screw, Blower, Fan
pg. 4
“Big Boy” Inlet Filters "F" Series 8”-14” 125/150# Pattern Flange ®
APPLICATIONS & EQUIPMENT Engines Fans Construction Industry Medical Pneumatic Conveying
Industrial & Severe Duty Blowers - Side Channel & P.D. Piston Compressors Screw Compressors Hydraulic Breathers – fine filtration
Waste Water Aeration Sparging Cement Power Plants Factory Air
FEATURES & SPECIFICATIONS
OPTIONS (Inquiries Encouraged) 1/8” tap holes Pressure Drop Indicator Available in Stainless Steel
Special connections Single Barrel Lg Flow Mega Boy Filters
Epoxy coated housings Various media available
CONFIGURATION
DRAWING
Inlet Outlet
I = Industrial Duty S = Severe Duty E = Extreme Duty
Dimension tolerance + 1/4”
Rated Flow SCFM
I S E I S E I S E E S
with Polyester Element
with Paper Element
Flg Outlet
A
B
C
F-377P-800F F-385P-800F F-485P-800F F-385P-1000F F-485P-1000F F-685P-1000F F-385P-1200F F-485P-1200F F-685P-1200F F-485P(2)-1200F F-485P(2)-1400F
F-376P-800F F-384P-800F F-484P-800F F-384P-1000F F-484P-1000F F-384P(2)-1000F F-384P-1200F F-484P-1200F F-384P(2)-1200F F-484P(2)-1200F F-484P(2)-1400F
8" 8" 8" 10" 10" 10" 12" 12" 12" 12" 14"
23 23 31 23 31 38 23 31 38 53 53
6 6 6 6 6 6 6 6 6 6 6
22 1/2 28 1/2 28 1/2 28 1/2 28 1/2 28 1/2 28 1/2 28 1/2 28 1/2 28 1/2 28 1/2
125/150# Pattern Flg 8" 10" 12" 14"
DIMENSIONS - inches O.D. B.C. B.H. 13 1/2 11 3/4 0.88 16 14 1/4 1 19 17 1 21 18 3/4 1 1/2
DIMENSIONS - inches
No. of Holes 8 12 12 12
Element Rating
Approx. Wt. lbs
1440 1440 1800 1800 2600 2880 2600 2600 3500 4320 5400
1800 1800 1800 3300 3300 3300 3300 4700 4700 4700 6000
1825 3295 4705 3300 4705 6600 3300 4705 6600 9410 9410
68 125 138 130 143 165 135 155 175 195 245
Flange Thickness 0.38 0.38 0.5 0.5
Note: Model offerings and design parameters may change without notice.
1151 Ardmore Ave. Itasca, IL 60143 USA Sales/Service: 630.773.1363 Fax: 630.773.0727 E-mail: sales@solbergmfg.com Web Site: www.solbergmfg.com
Solberg – Discover the Possibilities
F44-306
Piston
Screw, Blower, Fan
pg. 5
F, FT, SpinMeister Series
Interchangeable media: Polyester, Paper, HEPA Several element sizes available at a given connection size providing a choice according to the severity of your application Temp (continuous): min -15°F (-26°C ) max 220°F (104°C ) Filter change out differential: 10”-15” H2O over initial delta P Pressure drop graphs available upon request
FILTER ASSEMBLIES
Polyester: 99%+ removal efficiency standard to 5 micron Paper: 99%+ removal efficiency standard to 2 micron Heavy gauge base with low pressure drop bracket and outlet pipe design Durable carbon steel construction with baked enamel finish and powder coated weatherhood Low entry velocity air gap between base and cover
Small Compact Exposed Element Filters ®
"FT" Series 1/2” - 3” MPT
APPLICATIONS & EQUIPMENT Industrial & Severe Duty Piston Compressors Screw Compressors Blowers - Side Channel & P.D. Hydraulic Breathers – fine filtration
Waste Water Aeration Sparging Cement Power Plants Factory Air
Engines Construction Workshop Medical/Dental Industry Pneumatic Conveying
F, FT, SpinMeister Series
FILTER ASSEMBLIES
FEATURES & SPECIFICATIONS Polyester: 99%+ removal efficiency standard to 5 micron Paper: 99%+ removal efficiency standard to 2 micron Exposed element for optimal air flow and low restriction Center bracket located for minimal flow restriction Heavy gauge base with low pressure drop outlet pipe design Durable carbon steel construction with baked enamel finish Interchangeable media: Polyester, Paper, HEPA
Several element sizes available at a given connection size providing a choice according to severity of your application Temp (continuous): min -15°F (-26°C ) max 220°F (104°C ) Filter change out differential: 10”-15” H2O over initial delta P Pressure drop graphs available upon request
OPTIONS (Inquiries Encouraged) Available in Stainless Steel Epoxy coated housings
1/8” tap holes Pressure Drop Indicator
CONFIGURATION
Various media available Special connections, BSPT
DRAWING
I = Industrial Duty S = Severe Duty
Dimension tolerance + 1/4” Rated Flow SCFM
with Polyester Element
I I I I I S I I I S I S I
MIN025 MIN038 FT-15-050 FT-15-075 FT-15-100 FT-19P-100 FT-19P-125 FT-19P-150 FT-31P-200 FT-231P-200 FT-31P-250 FT-231P-250 FT-231P-300
with Paper Element
------FT-14-050 FT-14-075 FT-14-100 FT-18P-100 FT-18P-125 FT-18P-150 FT-30P-200 FT-230P-200 FT-30P-250 FT-230P-250 FT-230P-300
DIMENSIONS - inches MPT Outlet
A
B
C
1/4" 3/8" 1/2" 3/4" 1" 1" 1 1/4" 1 1/2" 2" 2" 2 1/2" 2 1/2" 3"
3 3 4 4 4 6 5/8 6 5/8 6 5/8 7 1/4 12 1/2 7 1/2 12 3/4 13
3/4 3/4 1 1/2 1 1/2 1 1/2 1 5/8 1 5/8 1 5/8 2 1/4 2 1/4 2 1/2 2 1/2 3
1 3/4 1 3/4 4 1/2 4 1/2 4 1/2 4 1/2 4 1/2 4 1/2 6 6 6 6 6
Note: Model offerings and design parameters may change without notice.
Element Rating
Approx. Wt. lbs
7 7 10 20 25 35 55 70 85 135 100 195 300
7 7 10 25 35 55 70 85 135 135 195 195 300
7 7 35 35 35 100 100 100 195 195 195 300 300
0.5 0.5 1.20 1.30 1.40 1.80 1.80 2 3 7 4 7 8
1151 Ardmore Ave. Itasca, IL 60143 USA Sales/Service: 630.773.1363 Fax: 630.773.0727 E-mail: sales@solbergmfg.com Web Site: www.solbergmfg.com
Solberg – Discover the Possibilities
FT14-306
Piston
Screw, Blower, Fan
pg. 6
Compact Exposed Element Filters "FT" Series 3” - 6” MPT ®
APPLICATIONS & EQUIPMENT Engines Fans Construction Medical Pneumatic Conveying
Industrial & Severe Duty Piston Compressors Screw Compressors Blowers - Side Channel & P.D. Hydraulic Breathers – fine filtration
Waste Water Aeration Sparging Power Plants Factory Air
FEATURES & SPECIFICATIONS
OPTIONS (Inquiries Encouraged) 1/8” tap holes Pressure Drop Indicator
Available in Stainless Steel Epoxy coated housings
CONFIGURATION
Various media available Special connections, BSPT
DRAWING
Dimension tolerance + 1/4”
I = Industrial Duty S = Severe Duty E = Extreme Duty Rated Flow SCFM with Polyester Element
S S E I S E I S I
FT-235P-300 FT-245P-300 FT-275P-300 FT-235P-400 FT-245P-400 FT-275P-400 FT-245P-500 FT-275P-500 FT-275P-600
with Paper Element
FT-234P-300 FT-244P-300 FT-274P-300 FT-234P-400 FT-244P-400 FT-274P-400 FT-244P-500 FT-274P-500 FT-274P-600
DIMENSIONS - inches MPT Outlet
A
B
C
3" 3" 3" 4" 4" 4" 5" 5" 6"
13 13 13 14 14 14 14 14 15
3 3 3 4 4 4 4 4 5
8 10 12 8 10 12 10 12 12
Note: Model offerings and design parameters may change without notice.
Element Rating
Approx. Wt. lbs
300 300 300 300 450 450 500 650 650
300 300 300 520 520 520 800 800 1100
570 880 1100 570 880 1100 880 1100 1100
13 19 22 17 20 24 21 25 27
1151 Ardmore Ave. Itasca, IL 60143 USA Sales/Service: 630.773.1363 Fax: 630.773.0727 E-mail: sales@solbergmfg.com Web Site: www.solbergmfg.com
Solberg – Discover the Possibilities
FT24-306
Piston
Screw, Blower, Fan
pg. 7
F, FT, SpinMeister Series
Several element sizes available at a given connection size providing a choice according to severity of your application Temp (continuous): min -15°F (-26°C ) max 220°F (104°C ) Filter change out differential: 10”-15” H2O over initial delta P Pressure drop graphs available upon request
FILTER ASSEMBLIES
Polyester: 99%+ removal efficiency standard to 5 micron Paper: 99%+ removal efficiency standard to 2 micron Exposed element for optimal air flow and low restriction Center bracket located for minimal flow restriction Heavy gauge base with low pressure drop outlet pipe design Durable carbon steel construction with baked enamel finish Interchangeable media: Polyester, Paper, HEPA
Compact Exposed Element Filters "FT" Series 4” - 6” 125/150# Pattern Flange ®
APPLICATIONS & EQUIPMENT Industrial & Severe Duty Piston Compressors Screw Compressors Blowers - Side Channel & P.D. Hydraulic Breathers – fine filtration
Engines Fans Construction Medical Pneumatic Conveying
Waste Water Aeration Sparging Power Plants Factory Air
F, FT, SpinMeister Series
FILTER ASSEMBLIES
FEATURES & SPECIFICATIONS Polyester: 99%+ removal efficiency standard to 5 micron Paper: 99%+ removal efficiency standard to 2 micron Exposed element for optimal air flow and low restriction Center bracket located for minimal flow restriction Heavy gauge base with low pressure drop outlet pipe design Durable carbon steel construction with baked enamel finish Interchangeable media: Polyester, Paper, HEPA
Several element sizes available at a given connection size providing a choice according to severity of your application Temp (continuous): min -15°F (-26°C ) max 220°F (104°C ) Filter change out differential: 10”-15” H2O over initial delta P Pressure drop graphs available upon request
OPTIONS (Inquiries Encouraged) 1/8” tap holes Pressure Drop Indicator
Available in Stainless Steel Epoxy coated housings
CONFIGURATION
Various media available Special connections, BSPT
DRAWING
Flange Orientation
I = Industrial Duty S = Severe Duty E = Extreme Duty
Dimension tolerance + 1/4” Rated Flow SCFM
with Polyester Element
I S E I S I
FT-235P-400F FT-245P-400F FT-275P-400F FT-245P-500F FT-275P-500F FT-275P-600F
125/150# Pattern Flg 4" 5" 6"
with Paper Element
DIMENSIONS - inches
FT-234P-400F FT-244P-400F FT-274P-400F FT-244P-500F FT-274P-500F FT-274P-600F
DIMENSIONS - inches O.D. B.C. B.H. 9 7 1/2 0.75 10 8 1/2 0.88 11 9 1/2 0.88
No. of Holes 8 8 8
FLG Outlet
A
B
C
4" 4" 4" 5" 5" 6"
14 14 14 14 14 15
4 4 4 4 4 5
8 10 12 10 12 12
Element Rating
Approx. Wt. lbs
300 450 450 500 650 650
520 520 520 800 800 1100
570 880 1100 880 1100 1100
15 21 24 24 28 31
Flange Thickness 0.38 0.38 0.38
Note: Model offerings and design parameters may change without notice.
1151 Ardmore Ave. Itasca, IL 60143 USA Sales/Service: 630.773.1363 Fax: 630.773.0727 E-mail: sales@solbergmfg.com Web Site: www.solbergmfg.com
Solberg – Discover the Possibilities
FT34-306
Piston
Screw, Blower, Fan
pg. 8
“Big Boy” Exposed Element Filters "FT" Series 8” - 14” 125/150# Pattern Flange ®
APPLICATIONS & EQUIPMENT Industrial & Severe Duty Piston Compressors Screw Compressors Blowers - Side Channel & P.D. Hydraulic Breathers – fine filtration
Engines Fans Construction Medical Pneumatic Conveying
Waste Water Aeration Sparging Cement Power Plants Factory Air
FEATURES & SPECIFICATIONS
OPTIONS (Inquiries Encouraged) 1/8” tap holes Pressure Drop Indicator Available in Stainless Steel
Epoxy coated housings Various media available
CONFIGURATION
Special connections Single Barrel Lg Flow Mega Boy Filters
DRAWING
Flange Orientation
I = Industrial Duty S = Severe Duty E = Extreme Duty
I S E I S E I S E E S
with Polyester Element FT-377P-800F FT-385P-800F FT-485P-800F FT-385P-1000F FT-485P-1000F FT-685P-1000F FT-385P-1200F FT-485P-1200F FT-685P-1200F FT-485P(2)-1200F FT-485P(2)-1400F
125/150# Pattern Flg 8" 10" 12" 14"
with Paper Element FT-376P-800F FT-384P-800F FT-484P-800F FT-384P-1000F FT-484P-1000F FT-384P(2)-1000F FT-384P-1200F FT-484P-1200F FT-384P(2)-1200F FT-484P(2)-1200F FT-484P(2)-1400F
DIMENSIONS - inches O.D. B.C. B.H. 13 1/2 11 3/4 0.88 16 14 1/4 1 19 17 1 21 18 3/4 1 1/2
No. of Holes 8 12 12 12
DIMENSIONS - inches Flange Outlet 8" 8" 8" 10" 10" 10" 12" 12" 12" 12" 14"
A 23 23 31 23 31 38 23 31 38 53 53
B 6 6 6 6 6 6 6 6 6 6 6
C 14 3/4 19 3/4 19 3/4 19 3/4 19 3/4 19 3/4 19 3/4 19 3/4 19 3/4 19 3/4 19 3/4
Rated Flow SCFM Screw, Blower, Element Piston Fan Rating 1440 1800 1825 1440 1800 3295 1800 1800 4705 1800 3300 3300 2600 3300 4705 2880 3300 6600 2600 3300 3300 2600 4700 4705 3500 4700 6600 4320 4700 9410 5400 6000 9410
Approx. Wt. lbs 65 70 75 80 85 95 85 90 100 120 160
Flange Thickness 0.38 0.38 0.5 0.5
Note: Model offerings and design parameters may change without notice.
1151 Ardmore Ave. Itasca, IL 60143 USA Sales/Service: 630.773.1363 Fax: 630.773.0727 E-mail: sales@solbergmfg.com Web Site: www.solbergmfg.com
Solberg – Discover the Possibilities
FT44-306
Dimension tolerance + 1/4”
pg. 9
F, FT, SpinMeister Series
Interchangeable media: Polyester, Paper, HEPA Several element sizes available at a given connection size providing a choice according to severity of your application Temp (continuous): min -15°F (-26°C ) max 220°F (104°C ) Filter change out differential: 10”-15” H2O over initial delta P Pressure drop graphs available upon request
FILTER ASSEMBLIES
Polyester: 99%+ removal efficiency standard to 5 micron Paper: 99%+ removal efficiency standard to 2 micron Exposed element for optimal air flow and low restriction Center bracket located for minimal flow restriction Heavy gauge base with low pressure drop outlet pipe design Durable carbon steel construction with baked enamel finish
SpinMeister® Inlet Filters
For Pressure Systems, Extreme Duty Filtration "SM" Series 1/2”-4” MPT & 4”-12” 125/150# Pattern Flange
®
APPLICATIONS & EQUIPMENT Grain Elevators Cement Industry Plastics Industry
Screw Compressors Engines Blowers Fans
Wood Chip, Paper & Pulp Industries Pneumatic Conveying Systems Foundries
F, FT, SpinMeister Series
FILTER ASSEMBLIES
FEATURES & SPECIFICATIONS Extreme Duty Filtration for high dust environments Significantly Increases the life of the filter element The centrifugal flow forces particulate through the side louver. It achieves 85% efficiency @ 15 micron or larger. The air stream then enters the lower chamber and is filtered by a 99+% efficient pleated element SpinMeister® Precleaner is made of durable molded fiber filled composite material This is a configured product which enables unit to be modified to specific applications
Polyester: 99%+ removal efficiency standard to 5 micron Paper: 99%+ removal efficiency standard to 2 micron Filter housing has heavy gauge carbon steel base with low pressure drop bracket and outlet pipe design Durable carbon steel housing construction All small compact filters are a seamless drawn housing Temp (continuous): min -15°F (-26°C ) max 220°F (104°C ) Filter change out differential: 10”-15” H2O over initial delta P
OPTIONS (Inquiries Encouraged) Multiple Configurations Available SpinMeistersT® available in Polished Aluminum
Vacuum Systems configurations Selected Housings available in SS Various Media for Element
CONFIGURATION
Config. A
Config. B
Config. C
Reference Only with Polyester with Paper Element Element
A A A A A B B B B B C C C C C C D D D D D D
SM1.5-11-050 SM1.5-11-075 SM2-11-050 SM2-11-075 SM2-11-100 SM2-19P-100 SM2-19P-125 SM2-19P-150 SM2-19P-200 SM2-19P-250 SM3-235P-300 SM4-235P-300 SM3-235P-400 SM4-235P-400 SM3-235P-400F SM4-235P-400F SM6-275P-400F SM42-377P-500F SM62-377P-600F SM62-377P-800F SM63-385P-1000F SM63-485P-1200F
DRAWING
Outlet
SM1.5-10-050 1/2" SM1.5-10-075 3/4" SM2-10-050 1/2" SM2-10-075 3/4" SM2-10-100 1" SM2-18P-100 1" SM2-18P-125 1-1/4" SM2-18P-150 1-1/2" SM2-18P-200 2" SM2-18P-250 2-1/2" SM3-234P-300 3" SM4-234P-300 3" SM3-234P-400 4" SM4-234P-400 4" SM3-234P-400F 4" SM4-234P-400F 4" SM6-274P-400F 4" SM42-376P-500F 5" SM62-376P-600F 6" SM62-376P-800F 8" SM63-384P-1000F 10" SM63-484P-1200F 12"
Connection Style
MPT MPT MPT MPT MPT MPT MPT MPT MPT MPT MPT MPT MPT MPT FLG FLG FLG FLG FLG FLG FLG FLG
SCHEMATIC
Dimension tolerance + 1/4”
Config. D Reference Only Dimensions - inches A B C
7 3/8 7 3/4 7 3/8 7 3/4 7 3/4 10 5/8 10 3/4 10 3/4 11 3/8 11 5/8 18 3/4 19 5/8 19 3/4 20 5/8 19 3/4 20 5/8 30 3/4 28 1/2 30 1/2 31 1/2 30 1/2 37 1/2
Note: Model offerings and design parameters may change without notice.
7/8 1 1/4 7/8 1 1/4 1 1/4 1 1/2 1 5/8 1 5/8 2 1/4 2 1/2 3 3 4 4 4 4 4 4 5 6 6 6
4 1/8 4 1/8 4 1/8 4 1/8 4 1/8 7 7 7 7 7 11 11 11 11 11 11 16 22 1/2 22 1/2 22 1/2 28 1/2 28 1/2
Rated Flow SCFM
Approx. Wt. lbs
30 30 40 40 40 55 70 85 100 110 250 300 250 400 250 400 500 800 1100 1800 2700 2700
1.5 1.5 2 2 2 3.7 3.7 3.7 4 4 31 32 32 33 35 36 45 88 100 103 138 163
SpinMeisterTM Air Flow
Note: Contact your Solberg representative for specific sizing and availability. Registered Patent on SpinMeister®
1151 Ardmore Ave. Itasca, IL 60143 USA Sales/Service: 630.773.1363 Fax: 630.773.0727 E-mail: sales@solbergmfg.com Web Site: www.solbergmfg.com
Solberg – Discover the Possibilities
SM13-306
1/8” taps for pressure drop indicators on selected models Multiple connection types
pg. 10
Standard Replacement Parts/Accessories ®
For All Filter Assemblies & Exposed Element Filters
REPLACEMENT PARTS Weatherhood/Top for F Series Model No. WH6X2 WH6X5 WH7.625X5 WH10X10 WH10X10 WH16X10 WH16X10 WH16X16 WH22.5X15 WH28X15 T28000625 WH28X24 T28000625 T28000625
Element Top Top for F Series for FT Series Model No. Model No. N/A T4500312 N/A T4500312 N/A T6000312 N/A T6000312 N/A T8000437 N/A T1000437 N/A T12000437 N/A T12000625 N/A T14750625 N/A T19750625 T19750625 T19750625 N/A T19750625 T19750625 T19750625 T19750625 T19750625
Wingnut(s)/ Lock Hex Nut(s) Model No. WN25X20 WN25X20 WN25X20 WN38X16 WN38X16 WN38X16 WN38X16 LHN50X13 LHN50X13 LHN50X13 LHN50X13 LHN50X13 LHN50X13 LHN50X13
Washer(s) Model No. WR25X20 WR25X20 WR25X20 WR38X16 WR38X16 WR38X16 WR38X16 WR50X13 WR50X13 WR50X13 WR50X13 WR50X13 WR50X13 WR50X13
PRESSURE INDICATOR
“MEGA BOY” FILTER ASSEMBLIES
Solberg’s Filter Monitor Gauge shows the amount of filter element restriction and how much life the element has left. This is a convenient and inexpensive solution to receiving the maximum usage from every element.
“Mega Boy” Filters are single barrel style filters that are available up to 8000 SCFM and up to a 24” flange. It is perfect for space restricted areas while still needing a filter that can handle large air flows. Stainless Steel and epoxy coated housings also available. For more information ask for Datasheet FMGF.
MULTIBARREL FILTER ASSEMBLIES
Normal Clean Filter
Gauge shows how Gauge shows filter element capacity much capacity used. Filter remains requires service
Multibarrel Filters are available up to a 30” flange and 25,000 CFM. It is available in both box or trapezoid style manifold with either bottom or side outlets. Stainless Steel and epoxy coated housings also available. For more information ask for Datasheet MBF.
Part No: VG-020-013 Note: The monitor gauge has a 1/8” MPT connection. It is mounted either on the weatherhood or on the outlet pipe depending on the filter assembly. (Tap Hole Option Required)
Bottom Outlet Note: Model offerings and design parameters may change without notice.
1151 Ardmore Ave. Itasca, IL 60143 USA Sales/Service: 630.773.1363 Fax: 630.773.0727 E-mail: sales@solbergmfg.com Web Site: www.solbergmfg.com
Solberg – Discover the Possibilities
FAP-306
Side Outlet
pg. 11
F, FT, SpinMeister Series
Prefilter Model PF14 PF18 PF30 PF230 PF234 PF244 PF274 PF374 PF376 PF384 PF384(2) PF484 PF484(2) PF684
FILTER ASSEMBLIES
Parent Model F/FT-Element-Connection Model-15/14-xxx Model-19/18-xxx Model-31/30-xxx Model-231/230-xxx Model-235/234-xxx Model-245/244-xxx Model-275/274-xxx Model-375/374-xxx Model-377/376-xxx Model-385/384-xxx Model-384(2)-xxx Model-485/484-xxx Model-485(2)/484(2)-xxx Model-685-xxx
Replacement Filter Elements ®
F, FT, SpinMeister Series
FILTER ASSEMBLIES
Face Velocity vs. Dust Holding Capacity
POLYESTER ELEMENTS
PAPER ELEMENTS
Particle Size vs. Filter Efficiency on polyester media at indicated face velocity: 15 cfm/ft² media 30 cfm/ft² media 45 cfm/ft² media
Particle Size vs. Filter Efficiency on paper media at indicated face velocity: 10 cfm/ft² media 15 cfm/ft² media 20 cfm/ft² media
99+% removal efficiency to 2 micron Heavy duty industrial strength paper surrounded by heavy gauge galvanized expanded metal Dust loading capacity is increased 40 - 50% with polyurethane prefilter Temp (continuous): min: -15°F (-26°C) max 220°F (104°C) Optimal sealing surface & design
99+% removal efficiency to 5 micron Reinforced with epoxy coated steel wire on both sides of cloth Washable - lukewarm water & mild detergent Dust loading capacity is increased 40 - 50% with polyurethane prefilter Temp (continuous): min -15°F (-26°C) max 220°F (104°C) Optimal sealing surface & design
ADVANTAGES
ADVANTAGES
Less maintenance More durable Moisture resistant Handles hot air and oil mist from unload cycle of reciprocating/piston compressor Legend B= Closed one end w/ Bolt hole, open on other end C= Closed one end, open on other end F= Felt gaskets on open end(s) G= Galvanized metal endcaps I= Injection molded santoprene M= Molded plastisol N= Neoprene gaskets on open end(s) R= Mixed Rubber/cork gasket on open ends T= Tin plated metal endcaps For other media types please see element brochure, Bulletin EL or contact your representative for more information. Inquires encouraged. Note: Model offerings and design parameters may change without notice.
1151 Ardmore Ave. Itasca, IL 60143 USA Sales/Service: 630.773.1363 Fax: 630.773.0727 General Office: 630.616.4400 E-mail: sales@solbergmfg.com Web Site: www.solbergmfg.com FAEL-5213
STD Endcap
Optimal surface area per given size Higher efficiency than many alternative media Cost Effective
DIMENSIONS - inches
Polyester
Paper
Surface Area ft2
Rated Flow
Polyester
Paper
Features
ID
OD
HT
05
04
I
---
2 1/4
1
0.2
0.2
8
07
06
I
---
3
1 3/8
0.58
0.58
12
11
10
I
---
4
1 3/8
1.1
1.1
35
15 19P®
14
M
3
4 3/8
2 5/16
0.50
1.12
35
18P
M
3
4 3/8
4 3/4
1.5
3.0
100
31P
30P
M
3 5/8
5 3/4
4 3/4
2.3
6.2
195
231P
230P
M
3 5/8
5 3/4
9 1/2
4.5
11.8
300
825
824
TC
1 1/2
2 1/2
2 1/2
0.38
0.92
25
843
842
T
2 3/8
3 7/8
2 3/4
0.60
1.7
55
849
848
T
2 9/16
5
4 7/8
2.0
5.0
115
851
850
TR
3 1/2
5 7/8
8 3/4
4.5
14.0
290
239
238
GBN
4 7/8
9 1/4
10
11.5
52
570 275
SCFM
35P
34P
M
4 3/4
7 7/8
4 13/16
4.0
11
235P
234P
M
4 3/4
7 7/8
9 5/8
8.3
22.8
570
335P
334P
M
4 3/4
7 7/8
14 1/2
12
34
800
245P
244P
GN | M
6
9 3/4
9 5/8
14
35.5
880
345P
344P
GN
6
9 3/4
14 1/2
22.1
57
1100
275P
274P
GN
8
11 3/4
9 5/8
19
45.4
1100
375P
374P
GN
8
11 3/4
14 1/2
28
68.1
1500
377P
376P
GN
9
14 5/8
14 1/2
50
125
1825
385P
384P
GN
14
19 5/8
14 1/2
50
140
3300
485P
484P
GN
14
19 5/8
21 1/2
75
200
4705
685P
---
GN
14
19 5/8
28 1/2
100
---
6600
P= Polyurethane Prefilter
Dimension tolerance + 1/4”
Solberg Manufacturing Inc. – Discover the Possibilities pg. 12