HP Products Duct Catalog

METFLO® DUCT COMPONENTS

When Ordering, Please Specify Type of Material: • Stainless • Galvanized Steel

DUST, FUME, TRIM & WASTE REMOVAL

H-P Products, Inc. • 800.860.TUBE (8823) Fax: 330.875.7155 • www.metflo.com

© 2002 H-P Products, Inc.

1

Services When Ordering, Please Specify Type of Material: • Stainless • Galvanized Steel

H-P Products, Inc., an ISO 9002 Certified Company, is a leading supplier of tubular components for industrial air systems.

CATALOG PART VARIATIONS Variations of our standard catalog parts can be manufactured to your unique requirements. With your drawing or specification, we can normally turn around a quote within 24 hours and produce the part within 1 week.

INDEX SERVICES. ..................................... 2 SPECIAL PARTS. ........................... 3

DELIVERY Fast delivery is available on a wide selection of in-stock METFLO® Duct Components. We’ll also make every effort to meet emergency requirements for non-stock items.

ROLLED LIP DUCT Straight Duct, Clamps ................... 4 Adjustable Sleeves ......................... 5 Elbows ...................................... 6-10 Fittings .................................... 11-13 Supplemental Components .... 14-16

PRICING All prices are FOB factory.

Terms: Net 30 days Prices are in U.S. dollars

ACCESSORIES Hangers, Saddles ......................... 17 Hose & Clamps

FLANGED END DUCT

Prices and specifications are subject to change without notice, and without obligation. All material is invoiced at the price in effect at time of shipment. All prices and discounts are based on one shipment to one destination.

Please see current price list for pricing.

Straight Duct, Flanges ................. 18 Elbows .................................... 19-24

NOTE

Fittings .................................... 25-28 Supplemental Components .... 29-30

Specifications subject to change without notice, without incurring any obligation on our part.

ISO 9002 CERTIFIED H-P Products, Inc. is ISO 9002 Certified! This accomplishment was achieved after a two-year planning and implementation process to assure that our customers receive the highest quality products and service possible.

ISO-9002 defines the correct and proper operation of a company in all aspects of quality, from sales to manufacturing and service. An accredited, third party assessor audited H-P Products to verify compliance with all documented procedures. H-P Products is in select company with few other central vacuum system manufacturers and fabricated air systems tubing suppliers with ISO certification.

SPECIAL SERVICES • ID Buff (Tag Free) finish to eliminate snags with the potential of causing line blockages. Weld seams and rolled edges are polished smooth and then tested for snags with fine mesh nylon material.

• OD Buff finish is available in T304 and T316 Stainless material.

• Painted finishes are also available.

• Special systems engineering assistance. Our engineers can design/size a system for you based upon the size, quantity and location of your pick-up points.

• Custom flat back elbows with replaceable wear plates are available for highly abrasive applications.

• Special boxing and packaging available.

S-120-0048 • 04/15/02

2

© 2002 H-P Products, Inc.

Can’t Find What You Need? Call Us! Catalog Part Variations Available Upon Request.

Special Parts SPECIAL PARTS Custom made to your specifications by certified welders.

Call for pricing on these parts and MANY MORE.

ROUTER HOODS

RADIAL ARM HOODS

• Stainless • Galvanized Steel

WEB SITE WWW.METFLO.COM

BELL MOUTHS VIBRATION DAMPNERS

When Ordering, Please Specify Type of Material:

NO LOSS STACKHEADS

Please visit our Web Site WWW.METFLO.COM to access our entire product offering located in “METFLO ® Components”. Click on “METFLO® Components”, find the solution to your needs, grab a shopping cart and fill it up. Online shopping assures customers they will receive the most accurate, up-to-date pricing.

Can’t find what you’re looking for? Our web site allows you to request a quote for custom tailored parts and e-mail your CAD drawings to H-P’s talented team of engineers who will help develop your special parts.

Click on “Contact Us” to link to the sales representative for your home state or country. Meet our Tubular Products team of Sales Representatives and Operations Personnel in “Our People”. Take a tour and see what’s under our roof!

SUCTION HOODS

DIVERTER VALVES

H-P Products, Inc. • 800.860.TUBE (8823) Fax: 330.875.7155 • www.metflo.com

© 2002 H-P Products, Inc.

3

Rolled Lip Duct When Ordering, Please Specify Type of Material: • Stainless • Galvanized Steel

Rolled Lip Duct

Rolled Lip Duct

Additional O-Rings

• Available in sizes 3” through 22” Diameter

• An O-Ring is included with each sleeve order.

Additional O-Rings must be ordered if needed for adjustment in fittings.

• 3” – 19” IS AVAILABLE IN ONE GAUGE HEAVIER THAN LISTED HERE Dia.

Length

Gauge

Part No.

3"* 4"* 5"* 6"* 7" 8" 9" 10" 11" 12" 13" 14" 15" 16" 17" 18" 19" 20" 22"

60" 60" 60" 60" 60" 60" 60" 60" 60" 60" 60" 60" 60" 60" 60" 60" 60" 60" 60"

26 24 24 24 22 22 22 22 22 22 20 20 20 20 20 20 20 20 20

RD-26WT300 RD-24WT400 RD-24WT500 RD-24WT600 RD-22WT700 RD-22WT800 RD-22WT900 RD-22WT1000 RD-22WT1100 RD-22WT1200 RD-20WT1300 RD-20WT1400 RD-20WT1500 RD-20WT1600 RD-20WT1700 RD-20WT1800 RD-20WT1900 RD-20WT2000 RD-20WT2200

* 3”– 6” IS 22 GAUGE IN STAINLESS STEEL • 3” DUCT CONSISTS OF A 3” COLLAR APPLIED TO A 3” PIECE OF ROLLED DUCT, AS OPPOSED TO THE STANDARD DUCT WHERE THE ROLLED LIP IS FORMED ON THE END OF THE DUCT ITSELF. THE 3” SLEEVE SLIDES OVER THE DUCT AS IN THE OTHER SIZES. • OUR STANDARD STOCK IS 5 FOOT LENGTHS

O-Ring

Lifetime Clamp • Available in sizes 3” through 22” Diameter • Made of durable stainless steel • BUNA N IS OIL RESISTANT UP TO 250° FARENHEIT

Lifetime Clamp

Our Clamp has a e nte Lifetime Guara ess steel

stainl This long lasting, an O-ring sealing ith w d te fit clamp is able. The locking gasket that is reus with a lifetime mechanism comes or er breaks, tears, guarantee. If it ev e fre a r fo it rn le, retu becomes unusab d. ke as ns tio es qu replacement, no

4

Dia.

Part No.

3" 4" 5" 6" 7" 8" 9" 10" 11" 12" 13" 14" 15" 16" 17" 18" 19" 20" 22"

D-CL300 D-CL400 D-CL500 D-CL600 D-CL700 D-CL800 D-CL900 D-CL1000 D-CL1100 D-CL1200 D-CL1300 D-CL1400 D-CL1500 D-CL1600 D-CL1700 D-CL1800 D-CL1900 D-CL2000 D-CL2200

© 2002 H-P Products, Inc.

Dia.

Temperature

Part No.

3" 3" 4" 4" 5" 5" 6" 6" 7" 7" 8" 8" 9" 9" 10" 10" 11" 11" 12" 12" 13" 13" 14" 14" 15" 15" 16" 16" 17" 17" 18" 18" 19" 19" 20" 20" 22" 22"

Regular High Temperature Regular High Temperature Regular High Temperature Regular High Temperature Regular High Temperature Regular High Temperature Regular High Temperature Regular High Temperature Regular High Temperature Regular High Temperature Regular High Temperature Regular High Temperature Regular High Temperature Regular High Temperature Regular High Temperature Regular High Temperature Regular High Temperature Regular High Temperature Regular High Temperature

D-300R D-300HT D-400R D-400HT D-500R D-500HT D-600R D-600HT D-700R D-700HT D-800R D-800HT D-900R D-900HT D-1000R D-1000HT D-1100R D-1100HT D-1200R D-1200HT D-1300R D-1300HT D-1400R D-1400HT D-1500R D-1500HT D-1600R D-1600HT D-1700R D-1700HT D-1800R D-1800HT D-1900R D-1900HT D-2000R D-2000HT D-2200R D-2200HT

• OTHER MATERIALS ARE AVAILABLE.

Can’t Find What You Need? Call Us! Catalog Part Variations Available Upon Request.

Rolled Lip Adjustable Sleeves 11” Adjustable Sleeve • An O-Ring is included with each sleeve order.

Additional O-Rings must be ordered if needed for adjustment in fittings.

Dia.

Length

Gauge

Part No.

3"* 4"* 5"* 6"* 7" 8" 9" 10" 11" 12" 13" 14" 15" 16" 17" 18" 19" 20" 22"

11" 11" 11" 11" 11" 11" 11" 11" 11" 11" 11" 11" 11" 11" 11" 11" 11" 11" 11"

26 24 24 24 22 22 22 22 22 22 20 20 20 20 20 20 20 20 20

RD-11SLEEVE3 RD-11SLEEVE4 RD-11SLEEVE5 RD-11SLEEVE6 RD-11SLEEVE7 RD-11SLEEVE8 RD-11SLEEVE9 RD-11SLEEVE10 RD-11SLEEVE11 RD-11SLEEVE12 RD-11SLEEVE13 RD-11SLEEVE14 RD-11SLEEVE15 RD-11SLEEVE16 RD-11SLEEVE17 RD-11SLEEVE18 RD-11SLEEVE19 RD-11SLEEVE20 RD-11SLEEVE22

* 3”– 6” IS 22 GAUGE IN STAINLESS STEEL

30” Adjustable Sleeve • An O-Ring is included with each sleeve order.

Additional O-Rings must be ordered if needed for adjustment in fittings.

Dia.

Length

Gauge

Part No.

3"* 4"* 5"* 6"* 7" 8" 9" 10" 11" 12" 13" 14" 15" 16" 17" 18" 19" 20" 22"

30" 30" 30" 30" 30" 30" 30" 30" 30" 30" 30" 30" 30" 30" 30" 30" 30" 30" 30"

26 24 24 24 22 22 22 22 22 22 20 20 20 20 20 20 20 20 20

RD-30SLEEVE3 RD-30SLEEVE4 RD-30SLEEVE5 RD-30SLEEVE6 RD-30SLEEVE7 RD-30SLEEVE8 RD-30SLEEVE9 RD-30SLEEVE10 RD-30SLEEVE11 RD-30SLEEVE12 RD-30SLEEVE13 RD-30SLEEVE14 RD-30SLEEVE15 RD-30SLEEVE16 RD-30SLEEVE17 RD-30SLEEVE18 RD-30SLEEVE19 RD-30SLEEVE20 RD-30SLEEVE22

When Ordering, Please Specify Type of Material:

30”- 56” Adjustable Sleeve Assembly

• Stainless • Galvanized Steel

• An O-Ring is included with each sleeve order.

Additional O-Rings must be ordered if needed for adjustment in fittings.

• Sleeve assembly includes sleeve, o-ring, clamp and section of rolled duct, cut and trimmed to form the prefitted assembly.

• The assembly has an adjustment of 26”, and a total length of 56”, no additional cutting required.

Dia.

Length

Gauge

Part No.

3"* 4"* 5"* 6"* 7" 8" 9" 10" 11" 12" 13" 14" 15" 16" 17" 18" 19" 20" 22"

56" 56" 56" 56" 56" 56" 56" 56" 56" 56" 56" 56" 56" 56" 56" 56" 56" 56" 56"

26 24 24 24 22 22 22 22 22 22 20 20 20 20 20 20 20 20 20

RD-30ADSLV3 RD-30ADSLV4 RD-30ADSLV5 RD-30ADSLV6 RD-30ADSLV7 RD-30ADSLV8 RD-30ADSLV9 RD-30ADSLV10 RD-30ADSLV11 RD-30ADSLV12 RD-30ADLSV13 RD-30ADSLV14 RD-30ADSLV15 RD-30ADSLV16 RD-30ADSLV17 RD-30ADSLV18 RD-30ADSLV19 RD-30ADSLV20 RD-30ADSLV22

* 3”– 6” IS 22 GAUGE IN STAINLESS STEEL

11” Sleeve”

30” - 56” Adjustable Sleeve Assembly • For cases when longer sleeves are needed

INSTALLING ADJUSTABLE COMPONENTS FOR FAST FIELD FITTING METFLO® DUCT COMPONENTS ALLOW FOR ENDLESS ADJUSTMENTS TO FIT ANY LENGTH REQUIREMENT FOR YOUR SYSTEM. THE ADJUSTABLE SLEEVE IS RECOMMENDED FOR LONGER LENGTHS, AND THE ADJUSTABLE COLLAR ON ALL FITTINGS IS FOR SHORT, IMPORTANT AND OFTEN TROUBLESOME ADJUSTMENTS BETWEEN PARTS. STEP 1: FOR A SLEEVE: CUT A STANDARD LENGTH OF DUCT TO A LENGTH THAT IS SLIGHTLY SHORTER THAN WHAT YOU NEED TO MAKE THE CONNECTIONS. FOR A FITTING: CUT A STANDARD LENGTH OF DUCT TO A LENGTH THAT IS SLIGHTLY LONGER THAN WHAT IS NEEDED. STEP 2: SLIDE THE CUT PIECE OF DUCT INTO FITTING AND USE AN O-RING AND CLAMP TO SECURE THE FIT.

When using the adjustable feature of the elbows and/or fittings, an additional O-Ring must be ordered.

* 3”– 6” IS 22 GAUGE IN STAINLESS STEEL

H-P Products, Inc. • 800.860.TUBE (8823) Fax: 330.875.7155 • www.metflo.com

© 2002 H-P Products, Inc.

5

Rolled Lip Elbows When Ordering, Please Specify Type of Material: • Stainless • Galvanized Steel

Stitched Welded Elbow

Segmented Elbow

• Our “General Purpose” elbow for applications where thin gauge material is optimal • Available in 3” through 12” Diameter • Available in 45 and 90 Degree

• Our gored, multi-purpose, smooth walled elbow • Available in Standard and Long Radius • Available in 30, 45, 60, and 90 Degree • Available in 7” through 22” Diameter • Available in zinc or stainless • All seams are welded or brazed

Standard Radius (1.5) times OD

Stitched Welded Elbow

Dia.

DOB

CLR

3" 4" 5" 6" 7" 8" 9" 10" 12" 3" 4" 5" 6" 7" 8" 9" 10" 12"

90 90 90 90 90 90 90 90 90 45 45 45 45 45 45 45 45 45

4-1/2 6 7-1/2 9 10-1/2 12 13-1/2 15 18 4-1/2 6 7-1/2 9 10-1/2 12 13-1/2 15 18

Gauge

22 22 22 22 22 22 22 22 22 22 22 22 22 22 22 22 22 22

Part No.

Standard Radius (1.5) times OD

RD-STSR342 RD-STSR442 RD-STSR542 RD-STSR642 RD-STSR742 RD-STSR842 RD-STSR942 RD-STSR1042 RD-STSR1242 RD-STSR341 RD-STSR441 RD-STSR541 RD-STSR641 RD-STSR741 RD-STSR841 RD-STSR941 RD-STSR1041 RD-STSR1241

• OTHER RADII ARE AVAILABLE

• GALVANIZED ONLY

• Our “General Purpose” elbow for applications where thin gauge material is optimal

Tube Elbow

• Available in 3” through 12” Diameter

• Our “Heavy Duty” elbow, for highly abrasive applications • Available in 3” through 8” Diameter • Available in 45 and 90 Degree

• Available in 45 and 90 Degree

Standard Radius (1.5) times OD • OTHER RADII ARE AVAILABLE Dia.

Degree

CLR

Gauge

Part No.

3" 4" 5" 6" 8" 3" 4" 5" 6" 8"

90 90 90 90 90 45 45 45 45 45

4-1/2 6 7-1/2 9 12 4-1/2 6 7-1/2 9 12

16 16 14 14 14 16 16 14 14 14

RD-SR342 RD-SR442 RD-SR542 RD-SR642 RD-SR842 RD-SR341 RD-SR441 RD-SR541 RD-SR641 RD-SR841

Long Radius (2.5) times OD Tube Elbow • Our “Heavy Duty” elbow, for highly abrasive applications • Available in 3” through 8” Diameter • Available in 45 and 90 Degree

Dia.

Degree CLR

Gauge

Part No.

3" 4" 5" 6" 8"

90 90 90 90 90

7-1/2 10 12-1/2 15 20

16 16 14 14 14

RD-EL302 RD-EL402 RD-EL502 RD-EL602 RD-EL802

3" 4" 5" 6" 8"

45 45 45 45 45

7-1/2 10 12-1/2 15 20

16 16 14 14 14

RD-EL301 RD-EL401 RD-EL501 RD-EL601 RD-EL801

Dia.

Degree

CLR

7" 7" 7" 7" 8" 8" 8" 8" 9" 9" 9" 9" 10" 10" 10" 10" 11" 11" 11" 11" 12" 12" 12" 12" 13" 13" 13" 13" 14" 14" 14" 14" 15" 15" 15" 15" 16" 16" 16" 16" 17" 17" 17" 17"

90 60 45 30 90 60 45 30 90 60 45 30 90 60 45 30 90 60 45 30 90 60 45 30 90 60 45 30 90 60 45 30 90 60 45 30 90 60 45 30 90 60 45 30

10-1/2 10-1/2 10-1/2 10-1/2 12 12 12 12 13-1/2 13-1/2 13-1/2 13-1/2 15 15 15 15 16-1/2 16-1/2 16-1/2 16-1/2 18 18 18 18 19-1/2 19-1/2 19-1/2 19-1/2 21 21 21 21 22-1/2 22-1/2 22-1/2 22-1/2 24 24 24 24 25-1/2 25-1/2 25-1/2 25-1/2

Gauge Part No.

20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 18 18 18 18 18 18 18 18 18 18 18 18 18 18 18 18 18 18 18 18 18 18 18 18 18 18 18 18

RD-SG742 RD-SG746 RD-SG741 RD-SG743 RD-SG842 RD-SG846 RD-SG841 RD-SG843 RD-SG942 RD-SG946 RD-SG941 RD-SG943 RD-SG1042 RD-SG1046 RD-SG1041 RD-SG1043 RD-SG1142 RD-SG1146 RD-SG1141 RD-SG1143 RD-SG1242 RD-SG1246 RD-SG1241 RD-SG1243 RD-SG1342 RD-SG1346 RD-SG1341 RD-SG1343 RD-SG1442 RD-SG1446 RD-SG1441 RD-SG1443 RD-SG1542 RD-SG1546 RD-SG1541 RD-SG1543 RD-SG1642 RD-SG1646 RD-SG1641 RD-SG1643 RD-SG1742 RD-SG1746 RD-SG1741 RD-SG1743

• ELBOWS ARE AIRTIGHT

6

© 2002 H-P Products, Inc.

Can’t Find What You Need? Call Us! Catalog Part Variations Available Upon Request.

Rolled Lip Elbows When Ordering, Please Specify Type of Material:

Standard Radius (1.5) cont.

Dia.

Degree

CLR

18" 18" 18" 18" 19" 19" 19" 19" 20" 20" 20" 20" 22" 22" 22" 22"

90 60 45 30 90 60 45 30 90 60 45 30 90 60 45 30

27 27 27 27 28-1/2 28-1/2 28-1/2 28-1/2 30 30 30 30 33 33 33 33

Gauge Part No.

18 18 18 18 18 18 18 18 18 18 18 18 18 18 18 18

RD-SG1842 RD-SG1846 RD-SG1841 RD-SG1843 RD-SG1942 RD-SG1946 RD-SG1941 RD-SG1943 RD-SG2042 RD-SG2046 RD-SG2041 RD-SG2043 RD-SG2242 RD-SG2246 RD-SG2241 RD-SG2243

Long Radius (2.5) times OD • OTHER RADII ARE AVAILABLE Dia.

Degree CLR

7" 7" 7" 7" 8" 8" 8" 8" 9" 9" 9" 9" 10" 10" 10" 10" 11" 11" 11" 11" 12" 12" 12" 12" 13" 13" 13" 13"

90 60 45 30 90 60 45 30 90 60 45 30 90 60 45 30 90 60 45 30 90 60 45 30 90 60 45 30

17-1/2 17-1/2 17-1/2 17-1/2 20 20 20 20 22-1/2 22-1/2 22-1/2 22-1/2 25 25 25 25 27-1/2 27-1/2 27-1/2 27-1/2 30 30 30 30 32-1/2 32-1/2 32-1/2 32-1/2

Gauge Part No.

20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 18 18 18 18 18 18 18 18 18 18 18 18

RD-SG702 RD-SG706 RD-SG701 RD-SG703 RD-SG802 RD-SG806 RD-SG801 RD-SG803 RD-SG902 RD-SG906 RD-SG901 RD-SG903 RD-SG1002 RD-SG1006 RD-SG1001 RD-SG1003 RD-SG1102 RD-SG1106 RD-SG1101 RD-SG1103 RD-SG1202 RD-SG1206 RD-SG1201 RD-SG1203 RD-SG1302 RD-SG1306 RD-SG1301 RD-SG1303

Long Radius (2.5) cont.

Dia.

14" 14" 14" 14" 15" 15" 15" 15" 16" 16" 16" 16" 17" 17" 17" 17" 18" 18" 18" 18" 19" 19" 19" 19" 20" 20" 20" 20" 22" 22" 22" 22"

Degree

90 60 45 30 90 60 45 30 90 60 45 30 90 60 45 30 90 60 45 30 90 60 45 30 90 60 45 30 90 60 45 30

H-P Products, Inc. • 800.860.TUBE (8823) Fax: 330.875.7155 • www.metflo.com

CLR

35 35 35 35 37-1/2 37-1/2 37-1/2 37-1/2 40 40 40 40 42-1/2 42-1/2 42-1/2 42-1/2 45 45 45 45 47-1/2 47-1/2 47-1/2 47-1/2 50 50 50 50 55 55 55 55

Gauge Part No.

18 18 18 18 18 18 18 18 18 18 18 18 18 18 18 18 18 18 18 18 18 18 18 18 18 18 18 18 18 18 18 18

RD-SG1402 RD-SG1406 RD-SG1401 RD-SG1403 RD-SG1502 RD-SG1506 RD-SG1501 RD-SG1503 RD-SG1602 RD-SG1606 RD-SG1601 RD-SG1603 RD-SG1702 RD-SG1706 RD-SG1701 RD-SG1703 RD-SG1802 RD-SG1806 RD-SG1801 RD-SG1803 RD-SG1902 RD-SG1906 RD-SG1901 RD-SG1903 RD-SG2002 RD-SG2006 RD-SG2001 RD-SG2003 RD-SG2202 RD-SG2206 RD-SG2201 RD-SG2203

• Stainless • Galvanized Steel

Segmented Elbow • Our gored, multi-purpose, smooth walled elbow • Available in Standard and Long Radius • Available in 30, 45, 60, and 90 Degree • Available in 7” through 22” Diameter • Available in zinc or stainless • All seams are welded or brazed

INSTALLING ADJUSTABLE COMPONENTS FOR FAST FIELD FITTING METFLO® DUCT COMPONENTS ALLOW FOR ENDLESS ADJUSTMENTS TO FIT ANY LENGTH REQUIREMENT FOR YOUR SYSTEM. THE ADJUSTABLE SLEEVE IS RECOMMENDED FOR LONGER LENGTHS, AND THE ADJUSTABLE COLLAR ON ALL FITTINGS IS FOR SHORT, IMPORTANT AND OFTEN TROUBLESOME ADJUSTMENTS BETWEEN PARTS. STEP 1: FOR A SLEEVE: CUT A STANDARD LENGTH OF DUCT TO A LENGTH THAT IS SLIGHTLY SHORTER THAN WHAT YOU NEED TO MAKE THE CONNECTIONS. FOR A FITTING: CUT A STANDARD LENGTH OF DUCT TO A LENGTH THAT IS SLIGHTLY LONGER THAN WHAT IS NEEDED. STEP 2: SLIDE THE CUT PIECE OF DUCT INTO FITTING AND USE AN O-RING AND CLAMP TO SECURE THE FIT.

When using the adjustable feature of the elbows and/or fittings, an additional O-Ring must be ordered.

© 2002 H-P Products, Inc.

7

Rolled Lip Elbows When Ordering, Please Specify Type of Material: • Stainless • Galvanized Steel

Pleated/Non-Welded Elbows • Our general purpose, low cost, unidirectional elbow. For applications where “Airtight” is not a requirement.

• Available in 3” through 15” Diameter • Available in Standard and Long Radius • Available in 30, 45, 60, and 90 Degree • Available in Galvanized only

Standard Radius (1.5) times OD

Pleated/Non-Welded Elbow • Our general purpose, low cost, unidirectional elbow. For applications where “Airtight” is not a requirement.

• Available in 3” through 15” Diameter • Available in Standard and Long Radius • Available in 30, 45, 60, and 90 Degree • Available in Galvanized only

Dia.

Degree

CLR

3" 3" 3" 3" 4" 4" 4" 4" 5" 5" 5" 5" 6" 6" 6" 6" 7" 7" 7" 7" 8" 8" 8" 8" 9" 9" 9" 9" 10" 10" 10" 10" 11" 11" 11" 11" 12" 12" 12" 12" 13" 13" 13" 13"

90 60 45 30 90 60 45 30 90 60 45 30 90 60 45 30 90 60 45 30 90 60 45 30 90 60 45 30 90 60 45 30 90 60 45 30 90 60 45 30 90 60 45 30

4.5 4.5 4.5 4.5 6 6 6 6 7-1/2 7-1/2 7-1/2 7-1/2 9 9 9 9 10-1/2 10-1/2 10-1/2 10-1/2 12 12 12 12 13-1/2 13-1/2 13-1/2 13-1/2 15 15 15 15 16-1/2 16-1/2 16-1/2 16-1/2 18 18 18 18 19-1/2 19-1/2 19-1/2 19-1/2

Gauge Part no.

22 22 22 22 22 22 22 22 22 22 22 22 22 22 22 22 22 22 22 22 22 22 22 22 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20

• NOT AVAILABLE IN STAINLESS STEEL • NOT AN AIRTIGHT ELBOW

8

© 2002 H-P Products, Inc.

RD-PL342 RD-PL346 RD-PL341 RD-PL343 RD-PL442 RD-PL446 RD-PL441 RD-PL443 RD-PL542 RD-PL546 RD-PL541 RD-PL543 RD-PL642 RD-PL646 RD-PL641 RD-PL643 RD-PL742 RD-PL746 RD-PL741 RD-PL743 RD-PL842 RD-PL846 RD-PL841 RD-PL843 RD-PL942 RD-PL946 RD-PL941 RD-PL943 RD-PL1042 RD-PL1046 RD-PL1041 RD-PL1043 RD-PL1142 RD-PL1146 RD-PL1141 RD-PL1143 RD-PL1242 RD-PL1246 RD-PL1241 RD-PL1243 RD-PL1342 RD-PL1346 RD-PL1341 RD-PL1343

Standard Radius (1.5) cont.

Dia.

Degree

CLR

14" 14" 14" 14" 15" 15" 15" 15"

90 60 45 30 90 60 45 30

21 21 21 21 22-1/2 22-1/2 22-1/2 22-1/2

Gauge Part No.

20 20 20 20 20 20 20 20

RD-PL1442 RD-PL1446 RD-PL1441 RD-PL1443 RD-PL1542 RD-PL1546 RD-PL1541 RD-PL1543

Long Radius (2.5) times OD Dia.

Degree

CLR

3" 3" 3" 3" 4" 4" 4" 4" 5" 5" 5" 5" 6" 6" 6" 6" 7" 7" 7" 7" 8" 8" 8" 8" 9" 9" 9" 9" 10" 10" 10" 10"

90 60 45 30 90 60 45 30 90 60 45 30 90 60 45 30 90 60 45 30 90 60 45 30 90 60 45 30 90 60 45 30

7-1/2 7-1/2 7-1/2 7-1/2 10 10 10 10 12-1/2 12-1/2 12-1/2 12-1/2 15 15 15 15 17-1/2 17-1/2 17-1/2 17-1/2 20 20 20 20 22-1/2 22-1/2 22-1/2 22-1/2 25 25 25 25

Gauge Part no.

22 22 22 22 22 22 22 22 22 22 22 22 22 22 22 22 22 22 22 22 22 22 22 22 20 20 20 20 20 20 20 20

RD-PL302 RD-PL306 RD-PL301 RD-PL303 RD-PL402 RD-PL406 RD-PL401 RD-PL403 RD-PL502 RD-PL506 RD-PL501 RD-PL503 RD-PL602 RD-PL606 RD-PL601 RD-PL603 RD-PL702 RD-PL706 RD-PL701 RD-PL703 RD-PL802 RD-PL806 RD-PL801 RD-PL803 RD-PL902 RD-PL906 RD-PL901 RD-PL903 RD-PL1002 RD-PL1006 RD-PL1001 RD-PL1003

• NOT AVAILABLE IN STAINLESS STEEL • NOT AN AIRTIGHT ELBOW

Can’t Find What You Need? Call Us! Catalog Part Variations Available Upon Request.

Rolled Lip Elbows Pleated/Non-Welded Elbows cont.

Long Radius (2.5) cont.

Dia.

Degree

CLR

11" 11" 11" 11" 12" 12" 12" 12" 13" 13" 13" 13" 14" 14" 14" 14" 15" 15" 15" 15"

90 60 45 30 90 60 45 30 90 60 45 30 90 60 45 30 90 60 45 30

27-1/2 27-1/2 27-1/2 27-1/2 30 30 30 30 32-1/2 32-1/2 32-1/2 32-1/2 35 35 35 35 37-1/2 37-1/2 37-1/2 37-1/2

Gauge Part No.

20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20

RD-PL1102 RD-PL1106 RD-PL1101 RD-PL1103 RD-PL1202 RD-PL1206 RD-PL1201 RD-PL1203 RD-PL1302 RD-PL1306 RD-PL1301 RD-PL1303 RD-PL1402 RD-PL1406 RD-PL1401 RD-PL1403 RD-PL1502 RD-PL1506 RD-PL1501 RD-PL1503

• NOT AVAILABLE IN STAINLESS STEEL • NOT AN AIRTIGHT ELBOW

Pleated/Welded Elbows • Our unidirectional, airtight, elbow of pleated construction • Available in 3” through 15” Diameter • Available in Standard and Long Radius • Available in 30, 45, 60, and 90 Degree • Available in Galvanized only

• Stainless • Galvanized Steel

Standard Radius (1.5) times OD Dia.

Degree CLR

3" 3" 3" 3" 4" 4" 4" 4" 5" 5" 5" 5" 6" 6" 6" 6" 7" 7" 7" 7" 8" 8" 8" 8" 9" 9" 9" 9" 10" 10" 10" 10" 11" 11" 11" 11" 12" 12" 12" 12"

90 60 45 30 90 60 45 30 90 60 45 30 90 60 45 30 90 60 45 30 90 60 45 30 90 60 45 30 90 60 45 30 90 60 45 30 90 60 45 30

4-1/2 4-1/2 4-1/2 4-1/2 6 6 6 6 7-1/2 7-1/2 7-1/2 7-1/2 9 9 9 9 10-1/2 10-1/2 10-1/2 10-1/2 12 12 12 12 13-1/2 13-1/2 13-1/2 13-1/2 15 15 15 15 16-1/2 16-1/2 16-1/2 16-1/2 18 18 18 18

Gauge Part no.

22 22 22 22 22 22 22 22 22 22 22 22 22 22 22 22 22 22 22 22 22 22 22 22 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20

RD-PW342 RD-PW346 RD-PW341 RD-PW343 RD-PW442 RD-PW446 RD-PW441 RD-PW443 RD-PW542 RD-PW546 RD-PW541 RD-PW543 RD-PW642 RD-PW646 RD-PW641 RD-PW643 RD-PW742 RD-PW746 RD-PW741 RD-PW743 RD-PW842 RD-PW846 RD-PW841 RD-PW843 RD-PW942 RD-PW946 RD-PW941 RD-PW943 RD-PW1042 RD-PW1046 RD-PW1041 RD-PW1043 RD-PW1142 RD-PW1146 RD-PW1141 RD-PW1143 RD-PW1242 RD-PW1246 RD-PW1241 RD-PW1243

• NOT AVAILABLE IN STAINLESS STEEL • THIS ELBOW IS AIRTIGHT

H-P Products, Inc. • 800.860.TUBE (8823) Fax: 330.875.7155 • www.metflo.com

When Ordering, Please Specify Type of Material:

© 2002 H-P Products, Inc.

Pleated/Welded Elbow • Our unidirectional, airtight, elbow of pleated construction • Available in 3” through 15” Diameter • Available in Standard and Long Radius • Available in 30, 45, 60, and 90 Degree • Available in Galvanized only

INSTALLING ADJUSTABLE COMPONENTS FOR FAST FIELD FITTING METFLO® DUCT COMPONENTS ALLOW FOR ENDLESS ADJUSTMENTS TO FIT ANY LENGTH REQUIREMENT FOR YOUR SYSTEM. THE ADJUSTABLE SLEEVE IS RECOMMENDED FOR LONGER LENGTHS, AND THE ADJUSTABLE COLLAR ON ALL FITTINGS IS FOR SHORT, IMPORTANT AND OFTEN TROUBLESOME ADJUSTMENTS BETWEEN PARTS. STEP 1: FOR A SLEEVE: CUT A STANDARD LENGTH OF DUCT TO A LENGTH THAT IS SLIGHTLY SHORTER THAN WHAT YOU NEED TO MAKE THE CONNECTIONS. FOR A FITTING: CUT A STANDARD LENGTH OF DUCT TO A LENGTH THAT IS SLIGHTLY LONGER THAN WHAT IS NEEDED. STEP 2: SLIDE THE CUT PIECE OF DUCT INTO FITTING AND USE AN O-RING AND CLAMP TO SECURE THE FIT.

When using the adjustable feature of the elbows and/or fittings, an additional O-Ring must be ordered.

9

Rolled Lip Elbows When Ordering, Please Specify Type of Material: • Stainless • Galvanized Steel

Pleated/Welded Elbows cont.

• Our unidirectional, airtight, elbow of pleated construction • Available in 3” through 15” Diameter • Available in Standard and Long Radius • Available in 30, 45, 60, and 90 Degree • Available in Galvanized only

Standard Radius (1.5) cont.

Pleated/Welded Elbow • Our unidirectional, airtight, elbow of pleated construction • Available in 3” through 15” Diameter • Available in Standard and Long Radius • Available in 30, 45, 60, and 90 Degree • Available in Galvanized only

Dia.

Degree CLR

13" 13" 13" 13" 14" 14" 14" 14" 15" 15" 15" 15"

90 60 45 30 90 60 45 30 90 60 45 30

19-1/2 19-1/2 19-1/2 19-1/2 21 21 21 21 22-1/2 22-1/2 22-1/2 22-1/2

Gauge Part no.

20 20 20 20 20 20 20 20 20 20 20 20

RD-PW1342 RD-PW1346 RD-PW1341 RD-PW1343 RD-PW1442 RD-PW1446 RD-PW1441 RD-PW1443 RD-PW1542 RD-PW1546 RD-PW1541 RD-PW1543

• NOT AVAILABLE IN STAINLESS STEEL • THIS ELBOW IS AIRTIGHT

Long Radius (2.5) times OD Dia.

Degree CLR

3" 3" 3" 3" 4" 4" 4" 4" 5" 5" 5" 5" 6" 6" 6" 6" 7" 7" 7" 7" 8" 8" 8" 8"

90 60 45 30 90 60 45 30 90 60 45 30 90 60 45 30 90 60 45 30 90 60 45 30

7-1/2 7-1/2 7-1/2 7-1/2 10 10 10 10 12-1/2 12-1/2 12-1/2 12-1/2 15 15 15 15 17-1/2 17-1/2 17-1/2 17-1/2 20 20 20 20

Gauge Part no.

22 22 22 22 22 22 22 22 22 22 22 22 22 22 22 22 22 22 22 22 22 22 22 22

RD-PW302 RD-PW306 RD-PW301 RD-PW303 RD-PW402 RD-PW406 RD-PW401 RD-PW403 RD-PW502 RD-PW506 RD-PW501 RD-PW503 RD-PW602 RD-PW606 RD-PW601 RD-PW603 RD-PW702 RD-PW706 RD-PW701 RD-PW703 RD-PW802 RD-PW806 RD-PW801 RD-PW803

Long Radius (2.5) cont.

Dia.

Degree CLR

9" 9" 9" 9" 10" 10" 10" 10" 11" 11" 11" 11" 12" 12" 12" 12" 13" 13" 13" 13" 14" 14" 14" 14" 15" 15" 15" 15"

90 60 45 30 90 60 45 30 90 60 45 30 90 60 45 30 90 60 45 30 90 60 45 30 90 60 45 30

22-1/2 22-1/2 22-1/2 22-1/2 25 25 25 25 27-1/2 27-1/2 27-1/2 27-1/2 30 30 30 30 32-1/2 32-1/2 32-1/2 32-1/2 35 35 35 35 37-1/2 37-1/2 37-1/2 37-1/2

Gauge Part no.

20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20

RD-PW902 RD-PW906 RD-PW901 RD-PW903 RD-PW1002 RD-PW1006 RD-PW1001 RD-PW1003 RD-PW1102 RD-PW1106 RD-PW1101 RD-PW1103 RD-PW1202 RD-PW1206 RD-PW1201 RD-PW1203 RD-PW1302 RD-PW1306 RD-PW1301 RD-PW1303 RD-PW1402 RD-PW1406 RD-PW1401 RD-PW1403 RD-PW1502 RD-PW1506 RD-PW1501 RD-PW1503

• NOT AVAILABLE IN STAINLESS STEEL • THIS ELBOW IS AIRTIGHT

• NOT AVAILABLE IN STAINLESS STEEL • THIS ELBOW IS AIRTIGHT

10

© 2002 H-P Products, Inc.

Can’t Find What You Need? Call Us! Catalog Part Variations Available Upon Request.

Rolled Lip Fittings When Ordering, Please Specify Type of Material:

90º Branches

YL Branches

(Tee on Taper)

(Tee on Taper)

• Available in 3” through 22” Diameter

• Available in 3” through 22” Diameter • Available in 30 and 45 Degree

Dia.

Degree

Gauge

Part No.

3" 4" 5" 6" 7" 8" 9" 10" 11" 12" 13" 14" 15" 16" 17" 18" 19" 20" 22"

90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90

18 18 18 18 18 18 18 18 18 18 18 18 18 18 18 18 18 18 18

RD-18TEE300 RD-18TEE400 RD-18TEE500 RD-18TEE600 RD-18TEE700 RD-18TEE800 RD-18TEE900 RD-18TEE1000 RD-18TEE1100 RD-18TEE1200 RD-18TEE1300 RD-18TEE1400 RD-18TEE1500 RD-18TEE1600 RD-18TEE1700 RD-18TEE1800 RD-18TEE1900 RD-18TEE2000 RD-18TEE2200

• WHEN USING THE ADJUSTABLE FEATURE OF THE FITTING, AN ADDITIONAL O-RING MUST BE ORDERED.

Dia.

Degree

Gauge

Part No.

3" 3" 4" 4" 5" 5" 6" 6" 7" 7" 8" 8" 9" 9" 10" 10" 11" 11" 12" 12" 13" 13" 14" 14" 15" 15" 16" 16" 17" 17" 18" 18" 19" 19" 20" 20" 22" 22"

30 45 30 45 30 45 30 45 30 45 30 45 30 45 30 45 30 45 30 45 30 45 30 45 30 45 30 45 30 45 30 45 30 45 30 45 30 45

18 18 18 18 18 18 18 18 18 18 18 18 18 18 18 18 18 18 18 18 18 18 18 18 18 18 18 18 18 18 18 18 18 18 18 18 18 18

RD-18YL3003 RD-18YL3001 RD-18YL4003 RD-18YL4001 RD-18YL5003 RD-18YL5001 RD-18YL6003 RD-18YL6001 RD-18YL7003 RD-18YL7001 RD-18YL8003 RD-18YL8001 RD-18YL9003 RD-18YL9001 RD-18YL10003 RD-18YL10001 RD-18YL11003 RD-18YL11001 RD-18YL12003 RD-18YL12001 RD-18YL13003 RD-18YL13001 RD-18YL14003 RD-18YL14001 RD-18YL15003 RD-18YL15001 RD-18YL16003 RD-18YL16001 RD-18YL17003 RD-18YL17001 RD-18YL18003 RD-18YL18001 RD-18YL19003 RD-18YL19001 RD-18YL20003 RD-18YL20001 RD-18YL22003 RD-18YL22001

• WHEN USING THE ADJUSTABLE FEATURE OF THE FITTING, AN ADDITIONAL O-RING MUST BE ORDERED.

• Stainless • Galvanized Steel

90° Branch

YL Branch INSTALLING ADJUSTABLE COMPONENTS FOR FAST FIELD FITTING 16 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1

METFLO® DUCT COMPONENTS ALLOW FOR ENDLESS ADJUSTMENTS TO FIT ANY LENGTH REQUIREMENT FOR YOUR SYSTEM. THE ADJUSTABLE SLEEVE IS RECOMMENDED FOR LONGER LENGTHS, AND THE ADJUSTABLE COLLAR ON ALL FITTINGS IS FOR SHORT, IMPORTANT AND OFTEN TROUBLESOME ADJUSTMENTS BETWEEN PARTS. STEP 1: FOR A SLEEVE: CUT A STANDARD LENGTH OF DUCT TO A LENGTH THAT IS SLIGHTLY SHORTER THAN WHAT YOU NEED TO MAKE THE CONNECTIONS. FOR A FITTING: CUT A STANDARD LENGTH OF DUCT TO A LENGTH THAT IS SLIGHTLY LONGER THAN WHAT IS NEEDED. STEP 2: SLIDE THE CUT PIECE OF DUCT INTO FITTING AND USE AN O-RING AND CLAMP TO SECURE THE FIT.

When using the adjustable feature of the elbows and/or fittings, an additional O-Ring must be ordered.

H-P Products, Inc. • 800.860.TUBE (8823) Fax: 330.875.7155 • www.metflo.com

© 2002 H-P Products, Inc.

11

Rolled Lip Fittings When Ordering, Please Specify Type of Material: • Stainless • Galvanized Steel

Double YL Branch

Double Y Branch

INSTALLING ADJUSTABLE COMPONENTS FOR FAST FIELD FITTING METFLO® DUCT COMPONENTS ALLOW FOR ENDLESS ADJUSTMENTS TO FIT ANY LENGTH REQUIREMENT FOR YOUR SYSTEM. THE ADJUSTABLE SLEEVE IS RECOMMENDED FOR LONGER LENGTHS, AND THE ADJUSTABLE COLLAR ON ALL FITTINGS IS FOR SHORT, IMPORTANT AND OFTEN TROUBLESOME ADJUSTMENTS BETWEEN PARTS. STEP 1: FOR A SLEEVE: CUT A STANDARD LENGTH OF DUCT TO A LENGTH THAT IS SLIGHTLY SHORTER THAN WHAT YOU NEED TO MAKE THE CONNECTIONS. FOR A FITTING: CUT A STANDARD LENGTH OF DUCT TO A LENGTH THAT IS SLIGHTLY LONGER THAN WHAT IS NEEDED.

Double YL Branches

Double Y Branches

(Tee on Taper)

• Used to join 2 branches to the main angle of 30 or 45 Degrees.

• Available in 4” through 22” Diameter

• Available in 3” through 22” Diameter • Available in 30 and 45 Degree Dia.

Degree

Gauge

Part No.

Dia.

Degree

Gauge

Part No.

3" 3" 4" 4" 5" 5" 6" 6" 7" 7" 8" 8" 9" 9" 10" 10" 11" 11" 12" 12" 13" 13" 14" 14" 15" 15" 16" 16" 17" 17" 18" 18" 19" 19" 20" 20" 22" 22"

30 45 30 45 30 45 30 45 30 45 30 45 30 45 30 45 30 45 30 45 30 45 30 45 30 45 30 45 30 45 30 45 30 45 30 45 30 45

18 18 18 18 18 18 18 18 18 18 18 18 18 18 18 18 18 18 18 18 18 18 18 18 18 18 18 18 18 18 18 18 18 18 18 18 18 18

RD-18DYL3003 RD-18DYL3001 RD-18DYL4003 RD-18DYL4001 RD-18DYL5003 RD-18DYL5001 RD-18DYL6003 RD-18DYL6001 RD-18DYL7003 RD-18DYL7001 RD-18DYL8003 RD-18DYL8001 RD-18DYL9003 RD-18DYL9001 RD-18DYL10003 RD-18DYL10001 RD-18DYL11003 RD-18DYL11001 RD-18DYL12003 RD-18DYL12001 RD-18DYL13003 RD-18DYL13001 RD-18DYL14003 RD-18DYL14001 RD-18DYL15003 RD-18DYL15001 RD-18DYL16003 RD-18DYL16001 RD-18DYL17003 RD-18DYL17001 RD-18DYL18003 RD-18DYL18001 RD-18DYL19003 RD-18DYL19001 RD-18DYL20003 RD-18DYL20001 RD-18DYL22003 RD-18DYL22001

4" 4" 5" 5" 6" 6" 7" 7" 8" 8" 9" 9" 10" 10" 11" 11" 12" 12" 13" 13" 14" 14" 15" 15" 16" 16" 17" 17" 18" 18" 19" 19" 20" 20" 22" 22"

30 45 30 45 30 45 30 45 30 45 30 45 30 45 30 45 30 45 30 45 30 45 30 45 30 45 30 45 30 45 30 45 30 45 30 45

18 18 18 18 18 18 18 18 18 18 18 18 18 18 18 18 18 18 18 18 18 18 18 18 18 18 18 18 18 18 18 18 18 18 18 18

RD-18DY4003 RD-18DY4001 RD-18DY5003 RD-18DY5001 RD-18DY6003 RD-18DY6001 RD-18DY7003 RD-18DY7001 RD-18DY8003 RD-18DY8001 RD-18DY9003 RD-18DY9001 RD-18DY10003 RD-18DY10001 RD-18DY11003 RD-18DY11001 RD-18DY12003 RD-18DY12001 RD-18DY13003 RD-18DY13001 RD-18DY14003 RD-18DY14001 RD-18DY15003 RD-18DY15001 RD-18DY16003 RD-18DY16001 RD-18DY17003 RD-18DY17001 RD-18DY18003 RD-18DY18001 RD-18DY19003 RD-18DY19001 RD-18DY20003 RD-18DY20001 RD-18DY22003 RD-18DY22001

• WHEN USING THE ADJUSTABLE FEATURE OF THE FITTING, AN ADDITIONAL O-RING MUST BE ORDERED.

• WHEN USING THE ADJUSTABLE FEATURE OF THE FITTING, AN ADDITIONAL O-RING MUST BE ORDERED.

STEP 2: SLIDE THE CUT PIECE OF DUCT INTO FITTING AND USE AN O-RING AND CLAMP TO SECURE THE FIT.

When using the adjustable feature of the elbows and/or fittings, an additional O-Ring must be ordered.

12

© 2002 H-P Products, Inc.

Can’t Find What You Need? Call Us! Catalog Part Variations Available Upon Request.

Rolled Lip Fittings Rolled Lip Adapters

Rolled Lip Reducers

• Available in Straight and Flanged Ends • Available in 3” through 22” Diameter • When using adjustable feature of the fitting, an additional O-Ring must be ordered

• Available in all diameters • Reducers are priced by the large end • Length is determined by the dimension of the reducer

Rolled/Straight End Dia.

Length

Gauge

Part No.

3"* 4"* 5"* 6"* 7" 8" 9" 10" 11" 12" 13" 14" 15" 16" 17" 18" 19" 20" 22"

8" 8" 8" 8" 8" 8" 8" 8" 8" 8" 8" 8" 8" 8" 8" 8" 8" 8" 8"

26 24 24 24 22 22 22 22 22 22 20 20 20 20 20 20 20 20 20

RD-AD300 RD-AD400 RD-AD500 RD-AD600 RD-AD700 RD-AD800 RD-AD900 RD-AD1000 RD-AD1100 RD-AD1200 RD-AD1300 RD-AD1400 RD-AD1500 RD-AD1600 RD-AD1700 RD-AD1800 RD-AD1900 RD-AD2000 RD-AD2200

* 3”– 6” IS 22 GAUGE IN STAINLESS STEEL

Rolled/Flanged End

Dia.

Gauge

Part No.

3" 4" 5" 6" 7" 8" 9" 10" 11" 12" 13" 14" 15" 16" 17" 18" 19" 20" 22"

20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20

RD-RC300 RD-RC400 RD-RC500 RD-RC600 RD-RC700 RD-RC800 RD-RC900 RD-RC1000 RD-RC1100 RD-RC1200 RD-RC1300 RD-RC1400 RD-RC1500 RD-RC1600 RD-RC1700 RD-RC1800 RD-RC1900 RD-RC2000 RD-RC2200

When Ordering, Please Specify Type of Material: • Stainless • Galvanized Steel

Rolled Lip/Straight End Adapter

Rolled Lip/Flanged End Adapter

• WHEN USING THE ADJUSTABLE FEATURE OF THE FITTING, AN ADDITIONAL O-RING MUST BE ORDERED.

Hose Adapters

Dia.

Length

Gauge

Part No.

3"* 4"* 5"* 6"* 7" 8" 9" 10" 11" 12" 13" 14" 15" 16" 17" 18" 19" 20" 22"

8" 8" 8" 8" 8" 8" 8" 8" 8" 8" 8" 8" 8" 8" 8" 8" 8" 8" 8"

26 24 24 24 22 22 22 22 22 22 20 20 20 20 20 20 20 20 20

RD-FAD300 RD-FAD400 RD-FAD500 RD-FAD600 RD-FAD700 RD-FAD800 RD-FAD900 RD-FAD1000 RD-FAD1100 RD-FAD1200 RD-FAD1300 RD-FAD1400 RD-FAD1500 RD-FAD1600 RD-FAD1700 RD-FAD1800 RD-FAD1900 RD-FAD2000 RD-FAD2200

* 3”– 6” IS 22 GAUGE IN STAINLESS STEEL

• Available in 3” through 22” Diameter Dia.

Length

Gauge

Part No.

3"* 4"* 5"* 6"* 7" 8" 9" 10" 11" 12" 13" 14" 15" 16" 17" 18" 19" 20" 22"

5" 5" 5" 5" 5" 5" 5" 5" 5" 5" 5" 5" 5" 5" 5" 5" 5" 5" 5"

26 24 24 24 22 22 22 22 22 22 20 20 20 20 20 20 20 20 20

RD-HA300 RD-HA400 RD-HA500 RD-HA600 RD-HA700 RD-HA800 RD-HA900 RD-HA1000 RD-HA1100 RD-HA1200 RD-HA1300 RD-HA1400 RD-HA1500 RD-HA1600 RD-HA1700 RD-HA1800 RD-HA1900 RD-HA2000 RD-HA2200

Rolled Lip Reducer

Hose Adapter

* 3”– 6” IS 22 GAUGE IN STAINLESS STEEL

H-P Products, Inc. • 800.860.TUBE (8823) Fax: 330.875.7155 • www.metflo.com

© 2002 H-P Products, Inc.

13

Rolled Lip Supplemental Components When Ordering, Please Specify Type of Material: • Stainless • Galvanized Steel

Butterfly Valve

Rectangular to Round Transition

Butterfly Valves

End Caps

• Available in 3” through 22” Diameter

• Available in 3” through 22” Diameter • Available with Closed End or Bird Screen

Dia.

Gauge

Part No.

3"* 4"* 5"* 6"* 7" 8" 9" 10" 11" 12" 13" 14" 15" 16" 17" 18" 19" 20" 22"

24 24 24 24 22 22 22 22 22 22 20 20 20 20 20 20 20 20 20

RD-BV300 RD-BV400 RD-BV500 RD-BV600 RD-BV700 RD-BV800 RD-BV900 RD-BV1000 RD-BV1100 RD-BV1200 RD-BV1300 RD-BV1400 RD-BV1500 RD-BV1600 RD-BV1700 RD-BV1800 RD-BV1900 RD-BV2000 RD-BV2200

Closed End Cap

* 3”– 6” IS 22 GAUGE IN STAINLESS STEEL

Rectangular to Round Transitions

Bird Screen Cap

Part No.

3" 4" 5" 6" 7" 8" 9" 10" 11" 12" 13" 14" 15" 16" 17" 18" 19" 20" 22"

RD-CAP300 RD-CAP400 RD-CAP500 RD-CAP600 RD-CAP700 RD-CAP800 RD-CAP900 RD-CAP1000 RD-CAP1100 RD-CAP1200 RD-CAP1300 RD-CAP1400 RD-CAP1500 RD-CAP1600 RD-CAP1700 RD-CAP1800 RD-CAP1900 RD-CAP2000 RD-CAP2200

Bird Screen Cap

• Available in 3” through 22” Diameter • Available with or without flanges

Closed End Cap

Dia.

Dia.

Gauge

Part No.

3" 4" 5" 6" 7" 8" 9" 10" 11" 12" 13" 14" 15" 16" 17" 18" 19" 20" 22"

20 20 20 20 20 20 20 20 20 20 20 20 18 18 18 18 18 18 18

RD-RRT300 RD-RRT400 RD-RRT500 RD-RRT600 RD-RRT700 RD-RRT800 RD-RRT900 RD-RRT1000 RD-RRT1100 RD-RRT1200 RD-RRT1300 RD-RRT1400 RD-RRT1500 RD-RRT1600 RD-RRT1700 RD-RRT1800 RD-RRT1900 RD-RRT2000 RD-RRT2200

Dia.

Part No.

3" 4" 5" 6" 7" 8" 9" 10" 11" 12" 13" 14" 15" 16" 17" 18" 19" 20" 22"

RD-BCAP300 RD-BCAP400 RD-BCAP500 RD-BCAP600 RD-BCAP700 RD-BCAP800 RD-BCAP900 RD-BCAP1000 RD-BCAP1100 RD-BCAP1200 RD-BCAP1300 RD-BCAP1400 RD-BCAP1500 RD-BCAP1600 RD-BCAP1700 RD-BCAP1800 RD-BCAP1900 RD-BCAP2000 RD-BCAP2200

• 3/16” AND HEAVIER FABRICATIONS ARE ALSO AVAILABLE

14

© 2002 H-P Products, Inc.

Can’t Find What You Need? Call Us! Catalog Part Variations Available Upon Request.

Rolled Lip Supplemental Components When Ordering, Please Specify Type of Material:

Cut-Offs

Blast Gates

• Available in 3” through 22” Diameter • Available in Full and Half Sizes • Cut-offs are used to balance systems, or save air, heat and power when machine is not in use.

• Stainless Steel Cut-Offs are cast aluminum bodies, with Stainless Steel blades and collars.

• Larger sizes are available

• Airtight Seal • May be used with positive or negative pressure • Not to be used if material is in the air stream • Available in 3” through 22” Diameter

Full Cut-Off Dia.

Length

3"* 4"* 5"* 6"* 7" 8" 9" 10" 11" 12" 14" 16" 18" 20" 22"

2-1/2" 2-1/2" 2-1/2" 2-1/2" 2-1/2" 2-1/2" 2-1/2" 2-1/2" 2-1/2" 2-1/2" 2-1/2" 2-1/2" 2-1/2" 2-1/2" 2-1/2"

Gauge

24 24 24 24 22 22 22 22 22 22 20 20 20 20 20

Part No.

RD-CF300 RD-CF400 RD-CF500 RD-CF600 RD-CF700 RD-CF800 RD-CF900 RD-CF1000 RD-CF1100 RD-CF1200 RD-CF1400 RD-CF1600 RD-CF1800 RD-CF2000 RD-CF2200

Dia.

Stub

Gauge

3" 4" 5" 6" 7" 8" 9" 10" 11" 12" 13" 14" 15" 16" 17" 18" 19" 20" 22"

2-1/2" 2-1/2" 2-1/2" 2-1/2" 2-1/2" 2-1/2" 2-1/2" 2-1/2" 2-1/2" 2-1/2" 2-1/2" 2-1/2" 2-1/2" 2-1/2" 2-1/2" 2-1/2" 2-1/2" 2-1/2" 2-1/2"

14 14 14 14 14 14 14 14 14 14 14 14 14 14 14 14 14 14 14

• Stainless • Galvanized Steel

Part No.

RD-BG14300 RD-BG14400 RD-BG14500 RD-BG14600 RD-BG14700 RD-BG14800 RD-BG14900 RD-BG141000 RD-BG141100 RD-BG141200 RD-BG141300 RD-BG141400 RD-BG141500 RD-BG141600 RD-BG141700 RD-BG141800 RD-BG141900 RD-BG142000 RD-BG142200

Cut Off (full)

Cut Off (half)

• STUB LENGTH IS PER SIDE

* 3”– 6” IS 22 GAUGE IN STAINLESS STEEL

Half Cut-Off

Ball Joints

Dia.

Gauge

Part No.

3" 4" 5" 6" 7" 8" 9" 10" 11" 12" 14" 16" 18"

24 24 24 24 22 22 22 22 22 22 20 20 20

RD-CF300-2 RD-CF400-2 RD-CF500-2 RD-CF600-2 RD-CF700-2 RD-CF800-2 RD-CF900-2 RD-CF1000-2 RD-CF1100-2 RD-CF1200-2 RD-CF1400-2 RD-CF1600-2 RD-CF1800-2

• Provide flexibility in ducts serving moving cutter heads or other moving equipment • Galvanized only Dia.

Gauge

Part No.

3" 4" 5" 6" 7" 8" 9" 10" 11" 12"

18 18 18 18 18 18 18 18 18 18

RD-JT300 RD-JT400 RD-JT500 RD-JT600 RD-JT700 RD-JT800 RD-JT900 RD-JT1000 RD-JT1100 RD-JT1200

Blast Gate

Ball Joint

• NOT AVAILABLE IN STAINLESS STEEL

H-P Products, Inc. • 800.860.TUBE (8823) Fax: 330.875.7155 • www.metflo.com

© 2002 H-P Products, Inc.

15

Rolled Lip Supplemental Components When Ordering, Please Specify Type of Material: • Stainless • Galvanized Steel

45° In Cut

90° In Cut

Floor Sweep

16

In-Cuts • Available in 3” through 22” Diameter Dia.

Degree

Gauge

Part No.

Dia.

Degree

Gauge

Part No.

3" 3" 3" 4" 4" 4" 5" 5" 5" 6" 6" 6" 7" 7" 7" 8" 8" 8" 9" 9" 9" 10" 10" 10" 11" 11" 11" 12" 12" 12" 13" 13" 13" 14" 14" 14" 15" 15" 15" 16" 16" 16" 17" 17" 17"

90 45 30 90 45 30 90 45 30 90 45 30 90 45 30 90 45 30 90 45 30 90 45 30 90 45 30 90 45 30 90 45 30 90 45 30 90 45 30 90 45 30 90 45 30

18 18 18 18 18 18 18 18 18 18 18 18 18 18 18 18 18 18 18 18 18 18 18 18 18 18 18 18 18 18 18 18 18 18 18 18 18 18 18 18 18 18 18 18 18

RD-90CUT300 RD-45CUT300 RD-30CUT300 RD-90CUT400 RD-45CUT400 RD-30CUT400 RD-90CUT500 RD-45CUT500 RD-30CUT500 RD-90CUT600 RD-45CUT600 RD-30CUT600 RD-90CUT700 RD-45CUT700 RD-30CUT700 RD-90CUT800 RD-45CUT800 RD-30CUT800 RD-90CUT900 RD-45CUT900 RD-30CUT900 RD-90CUT1000 RD-45CUT1000 RD-30CUT1000 RD-90CUT1100 RD-45CUT1100 RD-30CUT1100 RD-90CUT1200 RD-45CUT1200 RD-30CUT1200 RD-90CUT1300 RD-45CUT1300 RD-30CUT1300 RD-90CUT1400 RD-45CUT1400 RD-30CUT1400 RD-90CUT1500 RD-45CUT1500 RD-30CUT1500 RD-90CUT1600 RD-45CUT1600 RD-30CUT1600 RD-90CUT1700 RD-45CUT1700 RD-30CUT1700

18" 18" 18" 19" 19" 19" 20" 20" 20" 22" 22" 22"

90 45 30 90 45 30 90 45 30 90 45 30

18 18 18 18 18 18 18 18 18 18 18 18

RD-90CUT1800 RD-45CUT1800 RD-30CUT1800 RD-90CUT1900 RD-45CUT1900 RD-30CUT1900 RD-90CUT2000 RD-45CUT2000 RD-30CUT2000 RD-90CUT2200 RD-45CUT2200 RD-30CUT2200

© 2002 H-P Products, Inc.

Floor Sweeps • Floor sweeps have tight fitting doors, and are operated by foot.

Diameter

Gauge

Part No.

4" 5" 6" 7" 8"

18 18 18 18 18

RD-FSW400 RD-FSW500 RD-FSW600 RD-FSW700 RD-FSW800

Can’t Find What You Need? Call Us! Catalog Part Variations Available Upon Request.

Accessories Quick Hangers

Rubber Flex Hoses

• Each package contains 15 feet of cable, and 1 Gripple and Release Pin

• Available in diameters from 2” through 24”, in multiple lengths of 5 feet • Other types of hose available

Length

Part No.

15 ft.

15 ft.

15 ft.

D-TH300 D-TH400 D-TH500

When Ordering, Please Specify Type of Material: • Stainless • Galvanized Steel

Black Hose

Saddles • Available in 4” through 22” Diameter Dia.

Gauge

Part No.

4" 5" 6" 7" 8" 9" 10" 11" 12" 13" 14" 15" 16" 17" 18" 19" 20" 22"

16 16 16 16 16 16 16 14 14 14 14 14 14 14 14 14 14 14

D-SD400 D-SD500 D-SD600 D-SD700 D-SD800 D-SD900 D-SD1000 D-SD1100 D-SD1200 D-SD1300 D-SD1400 D-SD1500 D-SD1600 D-SD1700 D-SD1800 D-SD1900 D-SD2000 D-SD2200

Steel Hose • Available in 2” through 12” Diameter • Multiple Lengths of 5 Feet

Rigid Hose

Dia.

Part No.

2" 2.5" 3" 4" 5" 6" 7" 8" 9" 10" 12" 14" 16" 18" 20" 24"

D-HS200B D-HS250B D-HS300B D-HS400B D-HS500B D-HS600B D-HS700B D-HS800B D-HS900B D-HS1000B D-HS1200B D-HS1400B D-HS1600B D-HS1800B D-HS2000B D-HS2400B

Quick Hangers • ADDITIONAL HANGING ACCESSORIES INCLUDE THREADED ROD, CEILING CLIPS, PIG TAIL ANCHOR BOLTS, AND CONDUIT

Load Specifications for Quick Hangers PART NO.

Clear Hose Dia.

Part No.

2" 2.5" 3" 4" 5" 6" 7" 8" 10" 12" 14" 16" 18"

D-HS200 D-HS250 D-HS300 D-HS400 D-HS500 D-HS600 D-HS700 D-HS800 D-HS1000 D-HS1200 D-HS1400 D-HS1600 D-HS1800

DEG TO VERTICAL

WORKING LOADS(lbs)

BREAK LOADS(lbs)

D-TH300 0° D-TH300 30° D-TH300 45°

176 151 123

1276 1276 1276

D-TH400 0° D-TH400 30° D-TH400 45°

495 425 346

3300 3300 3300

D-TH500 0° D-TH500 30° D-TH500 45°

715 614 500

4752 4752 4752

Saddle

Steel Hose, Flex & Rigid

Dia.

Part No.

Dia.

2" 2.5" 3" 4" 5" 6"

D-HS200M D-HS250M D-HS300M D-HS400M D-HS500M D-HS600M

7" 8" 9" 10" 12"

Part No.

D-HS700M D-HS800M D-HS900M D-HS1000M D-HS1200M

Flex Hose Dia.

Part No.

Dia.

Part No.

3" 4" 5"

D-HS300MF D-HS400MF D-HS500MF

6" 7" 8"

D-HS600MF D-HS700MF D-HS800MF

Hose Clamps • Available in 2” through 12” Diameter Dia.

Part No.

2" 3" 4" 5" 6" 8" 10" 12"

D-HC200 D-HC300 D-HC400 D-HC500 D-HC600 D-HC800 D-HC1000 D-HC1200

H-P Products, Inc. • 800.860.TUBE (8823) Fax: 330.875.7155 • www.metflo.com

Rubber Flex Hose, Black

Rubber Flex Hose, Clear

© 2002 H-P Products, Inc.

17

Flanged End Duct When Ordering, Please Specify Type of Material: • Stainless • Galvanized Steel

Flanged Duct

Flange

Flanged Duct

Flanges

• Available in 3” through 48” • Standard Length is 5 feet

• Available in 3” through 48”

• ALSO AVAILABLE IN HEAVIER GAUGES AND LARGER SIZES Dia.

Length

Gauge

Part No.

3"* 4"* 5"* 6"* 7" 8" 9" 10" 11" 12" 13" 14" 15" 16" 17" 18" 19" 20" 22" 24" 26" 28" 30" 32" 34" 36" 38" 40" 42" 44" 46" 48"

60 60 60 60 60 60 60 60 60 60 60 60 60 60 60 60 60 60 60 60 60 60 60 60 60 60 60 60 60 60 60 60

26 24 24 24 22 22 22 22 22 22 20 20 20 20 20 20 20 20 20 18 18 18 18 18 18 18 18 18 18 18 18 18

FD-26WT300 FD-24WT400 FD-24WT500 FD-24WT600 FD-22WT700 FD-22WT800 FD-22WT900 FD-22WT1000 FD-22WT1100 FD-22WT1200 FD-20WT1300 FD-20WT1400 FD-20WT1500 FD-20WT1600 FD-20WT1700 FD-20WT1800 FD-20WT1900 FD-20WT2000 FD-20WT2200 FD-18WT2400 FD-18WT2600 FD-18WT2800 FD-18WT3000 FD-18WT3200 FD-18WT3400 FD-18WT3600 FD-18WT3800 FD-18WT4000 FD-18WT4200 FD-18WT4400 FD-18WT4600 FD-18WT4800

Dia.

Gauge

Part No.

3"* 4"* 5"* 6"* 7" 8" 9" 10" 11" 12" 13" 14" 15" 16" 17" 18" 19" 20" 22" 24" 26" 28" 30" 32" 34" 36" 38" 40" 42" 44" 46" 48"

26 24 24 24 22 22 22 22 22 22 20 20 20 20 20 20 20 20 20 18 18 18 18 18 18 18 18 18 18 18 18 18

D-FL300 D-FL400 D-FL500 D-FL600 D-FL700 D-FL800 D-FL900 D-FL1000 D-FL1100 D-FL1200 D-FL1300 D-FL1400 D-FL1500 D-FL1600 D-FL1700 D-FL1800 D-FL1900 D-FL2000 D-FL2200 D-FL2400 D-FL2600 D-FL2800 D-FL3000 D-FL3200 D-FL3400 D-FL3600 D-FL3800 D-FL4000 D-FL4200 D-FL4400 D-FL4600 D-FL4800

* 3”– 6” IS 22 GAUGE IN STAINLESS STEEL

* 3”– 6” IS 22 GAUGE IN STAINLESS STEEL

18

© 2002 H-P Products, Inc.

Can’t Find What You Need? Call Us! Catalog Part Variations Available Upon Request.

Flanged End Elbows When Ordering, Please Specify Type of Material:

Segmented Elbows • Our gored, multi-purpose, smooth walled elbow • Available in Standard and Long Radius • Available in 30, 45, 60, and 90 Degree • Available in 7” through 48” Diameter • Available in zinc or stainless • All seams are welded or brazed

Standard Radius (1.5) times OD • OTHER RADII AVAILABLE Dia.

Degree CLR

7" 7" 7" 7" 8" 8" 8" 8" 9" 9" 9" 9" 10" 10" 10" 10" 11" 11" 11" 11" 12" 12" 12" 12" 13" 13" 13" 13" 14" 14" 14" 14" 15" 15" 15" 15" 16" 16" 16" 16" 17" 17" 17" 17" 18"

90 60 45 30 90 60 45 30 90 60 45 30 90 60 45 30 90 60 45 30 90 60 45 30 90 60 45 30 90 60 45 30 90 60 45 30 90 60 45 30 90 60 45 30 90

10-1/2 10-1/2 10-1/2 10-1/2 12 12 12 12 13-1/2 13-1/2 13-1/2 13-1/2 15 15 15 15 16-1/2 16-1/2 16-1/2 16-1/2 18 18 18 18 19-1/2 19-1/2 19-1/2 19-1/2 21 21 21 21 22-1/2 22-1/2 22-1/2 22-1/2 24 24 24 24 25-1/2 25-1/2 25-1/2 25-1/2 27

Gauge

20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 18 18 18 18 18 18 18 18 18 18 18 18 18 18 18 18 18 18 18 18 18 18 18 18 18 18 18 18 18

Part No.

FD-SG742 FD-SG746 FD-SG741 FD-SG743 FD-SG842 FD-SG846 FD-SG841 FD-SG843 FD-SG942 FD-SG946 FD-SG941 FD-SG943 FD-SG1042 FD-SG1046 FD-SG1041 FD-SG1043 FD-SG1142 FD-SG1146 FD-SG1141 FD-SG1143 FD-SG1242 FD-SG1246 FD-SG1241 FD-SG1243 FD-SG1342 FD-SG1346 FD-SG1341 FD-SG1343 FD-SG1442 FD-SG1446 FD-SG1441 FD-SG1443 FD-SG1542 FD-SG1546 FD-SG1541 FD-SG1543 FD-SG1642 FD-SG1646 FD-SG1641 FD-SG1643 FD-SG1742 FD-SG1746 FD-SG1741 FD-SG1743 FD-SG1842

Standard Radius (1.5) cont.

• OTHER RADII AVAILABLE Dia.

Degree CLR

18" 18" 18" 19" 19" 19" 19" 20" 20" 20" 20" 22" 22" 22" 22" 24" 24" 24" 24" 26" 26" 26" 26" 28" 28" 28" 28" 30" 30" 30" 30" 32" 32" 32" 32" 34" 34" 34" 34" 36" 36" 36" 36" 38" 38" 38" 38" 40" 40" 40" 40"

60 45 30 90 60 45 30 90 60 45 30 90 60 45 30 90 60 45 30 90 60 45 30 90 60 45 30 90 60 45 30 90 60 45 30 90 60 45 30 90 60 45 30 90 60 45 30 90 60 45 30

H-P Products, Inc. • 800.860.TUBE (8823) Fax: 330.875.7155 • www.metflo.com

27 27 27 28-1/2 28-1/2 28-1/2 28-1/2 30 30 30 30 33 33 33 33 36 36 36 36 39 39 39 39 42 42 42 42 45 45 45 45 48 48 48 48 51 51 51 51 54 54 54 54 57 57 57 57 60 60 60 60

Gauge

18 18 18 18 18 18 18 18 18 18 18 18 18 18 18 18 18 18 18 18 18 18 18 18 18 18 18 18 18 18 18 18 18 18 18 18 18 18 18 18 18 18 18 18 18 18 18 18 18 18 18

Part no.

FD-SG1846 FD-SG1841 FD-SG1843 FD-SG1942 FD-SG1946 FD-SG1941 FD-SG1943 FD-SG2042 FD-SG2046 FD-SG2041 FD-SG2043 FD-SG2242 FD-SG2246 FD-SG2241 FD-SG2243 FD-SG2442 FD-SG2446 FD-SG2441 FD-SG2443 FD-SG2642 FD-SG2646 FD-SG2641 FD-SG2643 FD-SG2842 FD-SG2846 FD-SG2841 FD-SG2843 FD-SG3042 FD-SG3046 FD-SG3041 FD-SG3043 FD-SG3242 FD-SG3246 FD-SG3241 FD-SG3243 FD-SG3442 FD-SG3446 FD-SG3441 FD-SG3443 FD-SG3642 FD-SG3646 FD-SG3641 FD-SG3643 FD-SG3842 FD-SG3846 FD-SG3841 FD-SG3843 FD-SG4042 FD-SG4046 FD-SG4041 FD-SG4043

© 2002 H-P Products, Inc.

• Stainless • Galvanized Steel

Segmented Elbow • Our gored, multi-purpose, smooth walled elbow • Available in Standard and Long Radius • Available in 30, 45, 60, and 90 Degree • Available in 7” through 48” Diameter • Available in zinc or stainless • All seams are welded or brazed

19

Flanged End Elbows When Ordering, Please Specify Type of Material: • Stainless • Galvanized Steel

Segmented Elbows cont.

• Our gored, multi-purpose, smooth walled elbow • Available in Standard and Long Radius • Available in 30, 45, 60, and 90 Degree • Available in 7” through 48” Diameter • Available in zinc or stainless • All seams are welded or brazed

Standard Radius (1.5) cont.

• OTHER RADII AVAILABLE

Segmented Elbow • Our gored, multi-purpose, smooth walled elbow • Available in Standard and Long Radius • Available in 30, 45, 60, and 90 Degree • Available in 7” through 48” Diameter

Dia.

Degree CLR

Gauge

Part no.

42" 42" 42" 42" 44" 44" 44" 44" 46" 46" 46" 46" 48" 48" 48" 48"

90 60 45 30 90 60 45 30 90 60 45 30 90 60 45 30

18 18 18 18 18 18 18 18 18 18 18 18 18 18 18 18

FD-SG4242 FD-SG4246 FD-SG4241 FD-SG4243 FD-SG4442 FD-SG4446 FD-SG4441 FD-SG4443 FD-SG4642 FD-SG4646 FD-SG4641 FD-SG4643 FD-SG4842 FD-SG4846 FD-SG4841 FD-SG4843

63 63 63 63 66 66 66 66 69 69 69 69 72 72 72 72

• Available in zinc or stainless • All seams are welded or brazed

Long Radius (2.5) times OD • OTHER RADII AVAILABLE

20

Dia.

Degree CLR

7" 7" 7" 7" 8" 8" 8" 8" 9" 9" 9" 9" 10" 10" 10" 10" 11" 11" 11" 11" 12" 12" 12" 12"

90 60 45 30 90 60 45 30 90 60 45 30 90 60 45 30 90 60 45 30 90 60 45 30

© 2002 H-P Products, Inc.

17-1/2 17-1/2 17-1/2 17-1/2 20 20 20 20 22-1/2 22-1/2 22-1/2 22-1/2 25 25 25 25 27-1/2 27-1/2 27-1/2 27-1/2 30 30 30 30

Gauge

20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 18 18 18 18 18 18 18 18

Part No.

FD-SG702 FD-SG706 FD-SG701 FD-SG703 FD-SG802 FD-SG806 FD-SG801 FD-SG803 FD-SG902 FD-SG906 FD-SG901 FD-SG903 FD-SG1002 FD-SG1006 FD-SG1001 FD-SG1003 FD-SG1102 FD-SG1106 FD-SG1101 FD-SG1103 FD-SG1202 FD-SG1206 FD-SG1201 FD-SG1203

Long Radius (2.5) cont.

• OTHER RADII AVAILABLE Dia.

Degree CLR

13" 13" 13" 13" 14" 14" 14" 14" 15" 15" 15" 15" 16" 16" 16" 16" 17" 17" 17" 17" 18" 18" 18" 18" 19" 19" 19" 19" 20" 20" 20" 20" 22" 22" 22" 22" 24" 24" 24" 24" 26" 26" 26" 26" 28" 28" 28" 28"

90 60 45 30 90 60 45 30 90 60 45 30 90 60 45 30 90 60 45 30 90 60 45 30 90 60 45 30 90 60 45 30 90 60 45 30 90 60 45 30 90 60 45 30 90 60 45 30

32-1/2 32-1/2 32-1/2 32-1/2 35 35 35 35 37-1/2 37-1/2 37-1/2 37-1/2 40 40 40 40 42-1/2 42-1/2 42-1/2 42-1/2 45 45 45 45 47-1/2 47-1/2 47-1/2 47-1/2 50 50 50 50 55 55 55 55 60 60 60 60 65 65 65 65 70 70 70 70

Gauge

18 18 18 18 18 18 18 18 18 18 18 18 18 18 18 18 18 18 18 18 18 18 18 18 18 18 18 18 18 18 18 18 18 18 18 18 18 18 18 18 18 18 18 18 18 18 18 18

Part no.

FD-SG1302 FD-SG1306 FD-SG1301 FD-SG1303 FD-SG1402 FD-SG1406 FD-SG1401 FD-SG1403 FD-SG1502 FD-SG1506 FD-SG1501 FD-SG1503 FD-SG1602 FD-SG1606 FD-SG1601 FD-SG1603 FD-SG1702 FD-SG1706 FD-SG1701 FD-SG1703 FD-SG1802 FD-SG1806 FD-SG1801 FD-SG1803 FD-SG1902 FD-SG1906 FD-SG1901 FD-SG1903 FD-SG2002 FD-SG2006 FD-SG2001 FD-SG2003 FD-SG2202 FD-SG2206 FD-SG2201 FD-SG2203 FD-SG2402 FD-SG2406 FD-SG2401 FD-SG2403 FD-SG2602 FD-SG2606 FD-SG2601 FD-SG2603 FD-SG2802 FD-SG2806 FD-SG2801 FD-SG2803

Can’t Find What You Need? Call Us! Catalog Part Variations Available Upon Request.

Flanged End Elbows Segmented Elbows cont. Pleated/Non-Welded Elbows Long Radius (2.5) cont.

Dia.

Degree CLR

Gauge

Part no.

30" 30" 30" 30" 32" 32" 32" 32" 34" 34" 34" 34" 36" 36" 36" 36" 38" 38" 38" 38" 40" 40" 40" 40" 42" 42" 42" 42" 44" 44" 44" 44" 46" 46" 46" 46" 48" 48" 48" 48"

90 60 45 30 90 60 45 30 90 60 45 30 90 60 45 30 90 60 45 30 90 60 45 30 90 60 45 30 90 60 45 30 90 60 45 30 90 60 45 30

18 18 18 18 18 18 18 18 18 18 18 18 18 18 18 18 18 18 18 18 18 18 18 18 18 18 18 18 18 18 18 18 18 18 18 18 18 18 18 18

FD-SG3002 FD-SG3006 FD-SG3001 FD-SG3003 FD-SG3202 FD-SG3206 FD-SG3201 FD-SG3203 FD-SG3402 FD-SG3406 FD-SG3401 FD-SG3403 FD-SG3602 FD-SG3606 FD-SG3601 FD-SG3603 FD-SG3802 FD-SG3806 FD-SG3801 FD-SG3803 FD-SG4002 FD-SG4006 FD-SG4001 FD-SG4003 FD-SG4202 FD-SG4206 FD-SG4201 FD-SG4203 FD-SG4402 FD-SG4406 FD-SG4401 FD-SG4403 FD-SG4602 FD-SG4606 FD-SG4601 FD-SG4603 FD-SG4802 FD-SG4806 FD-SG4801 FD-SG4803

75 75 75 75 80 80 80 80 85 85 85 85 90 90 90 90 95 95 95 95 100 100 100 100 105 105 105 105 110 110 110 110 115 115 115 115 120 120 120 120

• Our general purpose, low cost, unidirectional elbow. For applications where “Airtight” is not a requirement.

• Available in 3” through 15” diameter • Available in Standard and Long Radius • Available in 30, 45, 60, and 90 Degree • Available in Galvanized only

When Ordering, Please Specify Type of Material: • Stainless • Galvanized Steel

Standard Radius (1.5) times OD Dia.

Degree CLR

3" 3" 3" 3" 4" 4" 4" 4" 5" 5" 5" 5" 6" 6" 6" 6" 7" 7" 7" 7" 8" 8" 8" 8" 9" 9" 9" 9" 10" 10" 10" 10" 11" 11" 11" 11" 12" 12" 12" 12"

90 60 45 30 90 60 45 30 90 60 45 30 90 60 45 30 90 60 45 30 90 60 45 30 90 60 45 30 90 60 45 30 90 60 45 30 90 60 45 30

4-1/2 4-1/2 4-1/2 4-1/2 6 6 6 6 7-1/2 7-1/2 7-1/2 7-1/2 9 9 9 9 10-1/2 10-1/2 10-1/2 10-1/2 12 12 12 12 13-1/2 13-1/2 13-1/2 13-1/2 15 15 15 15 16-1/2 16-1/2 16-1/2 16-1/2 18 18 18 18

Gauge

Part No.

22 22 22 22 22 22 22 22 22 22 22 22 22 22 22 22 22 22 22 22 22 22 22 22 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20

FD-PL342 FD-PL346 FD-PL341 FD-PL343 FD-PL442 FD-PL446 FD-PL441 FD-PL443 FD-PL542 FD-PL546 FD-PL541 FD-PL543 FD-PL642 FD-PL646 FD-PL641 FD-PL643 FD-PL742 FD-PL746 FD-PL741 FD-PL743 FD-PL842 FD-PL846 FD-PL841 FD-PL843 FD-PL942 FD-PL946 FD-PL941 FD-PL943 FD-PL1042 FD-PL1046 FD-PL1041 FD-PL1043 FD-PL1142 FD-PL1146 FD-PL1141 FD-PL1143 FD-PL1242 FD-PL1246 FD-PL1241 FD-PL1243

Flanged/Pleated Non-Welded Elbow

• Our general purpose, low cost, unidirectional elbow. For applications where “Airtight” is not a requirement.

• Available in 3” through 15” diameter • Available in Standard and Long Radius • Available in 30, 45, 60, and 90 Degree • When using the adjustable feature of the fitting, an additional O-Ring must be ordered.

• Available in Galvanized only

• NOT AVAILABLE IN STAINLESS STEEL

H-P Products, Inc. • 800.860.TUBE (8823) Fax: 330.875.7155 • www.metflo.com

© 2002 H-P Products, Inc.

21

Flanged End Elbows When Ordering, Please Specify Type of Material: • Stainless • Galvanized Steel

Pleated/Non-Welded Elbows cont.

• Our general purpose, low cost, unidirectional elbow. For applications where “Airtight” is not a requirement.

• Available in 3” through 15” diameter • Available in Standard and Long Radius • Available in 30, 45, 60, and 90 Degree • When using the adjustable feature of the fitting, an additional O-Ring must be ordered.

• Available in Galvanized only

Standard Radius (1.5) cont.

Pleated Non-Welded Elbow • Our general purpose, low cost, unidirectional elbow. For applications where “Airtight” is not a requirement.

• Available in 3” through 15” diameter • Available in Standard and Long Radius • Available in 30, 45, 60, and 90 Degree • When using the adjustable feature of the fitting, an additional O-Ring must be ordered.

• Available in Galvanized only

Dia.

Degree CLR

13" 13" 13" 13" 14" 14" 14" 14" 15" 15" 15" 15"

90 60 45 30 90 60 45 30 90 60 45 30

19-1/2 19-1/2 19-1/2 19-1/2 21 21 21 21 22-1/2 22-1/2 22-1/2 22-1/2

Gauge

20 20 20 20 20 20 20 20 20 20 20 20

Long Radius (2.5) cont.

Part no.

Dia.

Degree CLR

FD-PL1342 FD-PL1346 FD-PL1341 FD-PL1343 FD-PL1442 FD-PL1446 FD-PL1441 FD-PL1443 FD-PL1542 FD-PL1546 FD-PL1541 FD-PL1543

10" 10" 10" 10" 11" 11" 11" 11" 12" 12" 12" 12" 13" 13" 13" 13" 14" 14" 14" 14" 15" 15" 15" 15"

90 60 45 30 90 60 45 30 90 60 45 30 90 60 45 30 90 60 45 30 90 60 45 30

• NOT AVAILABLE IN STAINLESS STEEL

Long Radius (2.5) times OD Dia.

Degree CLR

3" 3" 3" 3" 4" 4" 4" 4" 5" 5" 5" 5" 6" 6" 6" 6" 7" 7" 7" 7" 8" 8" 8" 8" 9" 9" 9" 9"

90 60 45 30 90 60 45 30 90 60 45 30 90 60 45 30 90 60 45 30 90 60 45 30 90 60 45 30

7-1/2 7-1/2 7-1/2 7-1/2 10 10 10 10 12-1/2 12-1/2 12-1/2 12-1/2 15 15 15 15 17-1/2 17-1/2 17-1/2 17-1/2 20 20 20 20 22-1/2 22-1/2 22-1/2 22-1/2

Gauge

Part No.

22 22 22 22 22 22 22 22 22 22 22 22 22 22 22 22 22 22 22 22 22 22 22 22 20 20 20 20

FD-PL302 FD-PL306 FD-PL301 FD-PL303 FD-PL402 FD-PL406 FD-PL401 FD-PL403 FD-PL502 FD-PL506 FD-PL501 FD-PL503 FD-PL602 FD-PL606 FD-PL601 FD-PL603 FD-PL702 FD-PL706 FD-PL701 FD-PL703 FD-PL802 FD-PL806 FD-PL801 FD-PL803 FD-PL912 FD-PL906 FD-PL901 FD-PL903

25 25 25 25 27-1/2 27-1/2 27-1/2 27-1/2 30 30 30 30 32-1/2 32-1/2 32-1/2 32-1/2 35 35 35 35 37-1/2 37-1/2 37-1/2 37-1/2

Gauge

20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20

Part no.

FD-PL1002 FD-PL1006 FD-PL1001 FD-PL1003 FD-PL1102 FD-PL1106 FD-PL1101 FD-PL1103 FD-PL1202 FD-PL1206 FD-PL1201 FD-PL1203 FD-PL1302 FD-PL1306 FD-PL1301 FD-PL1303 FD-PL1402 FD-PL1406 FD-PL1401 FD-PL1403 FD-PL1502 FD-PL1506 FD-PL1501 FD-PL1503

• NOT AVAILABLE IN STAINLESS STEEL

• NOT AVAILABLE IN STAINLESS STEEL

22

© 2002 H-P Products, Inc.

Can’t Find What You Need? Call Us! Catalog Part Variations Available Upon Request.

Flanged End Elbows When Ordering, Please Specify Type of Material:

Pleated/Welded Elbows • Our unidirectional, airtight, elbow of pleated construction • Available in 3” through 15” diameter • Available in Standard and Long Radius • Available in 30, 45, 60, and 90 Degree • Available in Galvanized only

Standard Radius (1.5) times OD Dia.

Degree CLR

3" 3" 3" 3" 4" 4" 4" 4" 5" 5" 5" 5" 6" 6" 6" 6" 7" 7" 7" 7" 8" 8" 8" 8" 9" 9" 9" 9" 10" 10" 10" 10" 11" 11" 11" 11" 12" 12" 12" 12" 13" 13" 13" 13"

90 60 45 30 90 60 45 30 90 60 45 30 90 60 45 30 90 60 45 30 90 60 45 30 90 60 45 30 90 60 45 30 90 60 45 30 90 60 45 30 90 60 45 30

4-1/2 4-1/2 4-1/2 4-1/2 6 6 6 6 7-1/2 7-1/2 7-1/2 7-1/2 9 9 9 9 10-1/2 10-1/2 10-1/2 10-1/2 12 12 12 12 13-1/2 13-1/2 13-1/2 13-1/2 15 15 15 15 16-1/2 16-1/2 16-1/2 16-1/2 18 18 18 18 19-1/2 19-1/2 19-1/2 19-1/2

Gauge

22 22 22 22 22 22 22 22 22 22 22 22 22 22 22 22 22 22 22 22 22 22 22 22 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20

• Stainless • Galvanized Steel

Standard Radius (1.5) cont.

Part No.

Dia.

Degree CLR

FD-PW342 FD-PW346 FD-PW341 FD-PW343 FD-PW442 FD-PW446 FD-PW441 FD-PW443 FD-PW542 FD-PW546 FD-PW541 FD-PW543 FD-PW642 FD-PW646 FD-PW641 FD-PW643 FD-PW742 FD-PW746 FD-PW741 FD-PW743 FD-PW842 FD-PW846 FD-PW841 FD-PW843 FD-PW942 FD-PW946 FD-PW941 FD-PW943 FD-PW1042 FD-PW1046 FD-PW1041 FD-PW1043 FD-PW1142 FD-PW1146 FD-PW1141 FD-PW1143 FD-PW1242 FD-PW1246 FD-PW1241 FD-PW1243 FD-PW1342 FD-PW1346 FD-PW1341 FD-PW1343

14" 14" 14" 14" 15" 15" 15" 15"

90 60 45 30 90 60 45 30

• NOT AVAILABLE IN STAINLESS STEEL

21 21 21 21 22-1/2 22-1/2 22-1/2 22-1/2

Gauge

20 20 20 20 20 20 20 20

Part no.

FD-PW1442 FD-PW1446 FD-PW1441 FD-PW1443 FD-PW1542 FD-PW1546 FD-PW1541 FD-PW1543

• NOT AVAILABLE IN STAINLESS STEEL

Long Radius (2.5) times OD Dia.

Degree CLR

3" 3" 3" 3" 4" 4" 4" 4" 5" 5"" 5" 5" 6" 6" 6" 6" 7" 7" 7" 7" 8" 8" 8" 8" 9" 9" 9" 9" 10" 10" 10" 10"

90 60 45 30 90 60 45 30 90 60 45 30 90 60 45 30 90 60 45 30 90 60 45 30 90 60 45 30 90 60 45 30

7-1/2 7-1/2 7-1/2 7-1/2 10 10 10 10 12-1/2 12-1/2 12-1/2 12-1/2 15 15 15 15 17-1/2 17-1/2 17-1/2 17-1/2 20 20 20 20 22-1/2 22-1/2 22-1/2 22-1/2 25 25 25 25

Gauge

22 22 22 22 22 22 22 22 22 22 22 22 22 22 22 22 22 22 22 22 22 22 22 22 20 20 20 20 20 20 20 20

Part No.

FD-PW302 FD-PW306 FD-PW301 FD-PW303 FD-PW402 FD-PW406 FD-PW401 FD-PW403 FD-PW502 FD-PW506 FD-PW501 FD-PW503 FD-PW602 FD-PW606 FD-PW601 FD-PW603 FD-PW702 FD-PW706 FD-PW701 FD-PW703 FD-PW802 FD-PW806 FD-PW801 FD-PW803 FD-PW902 FD-PW906 FD-PW901 FD-PW903 FD-PW1002 FD-PW1006 FD-PW1001 FD-PW1003

Pleated Welded Elbow • Our unidirectional, airtight, elbow of pleated construction • Available in 3” through 15” diameter • Available in Standard and Long Radius • Available in 30, 45, 60, and 90 Degree • Available in Galvanized only

• NOT AVAILABLE IN STAINLESS STEEL

H-P Products, Inc. • 800.860.TUBE (8823) Fax: 330.875.7155 • www.metflo.com

© 2002 H-P Products, Inc.

23

Flanged End Elbows When Ordering, Please Specify Type of Material: • Stainless • Galvanized Steel

Pleated/Welded Elbow cont.

• Our unidirectional, airtight, elbow of pleated construction • Available in 3” through 15” diameter • Available in Standard and Long Radius • Available in 30, 45, 60, and 90 Degree • Available in Galvanized only

Long Radius (2.5) cont.

Flanged/Pleated Welded Elbow • Our unidirectional, airtight, elbow of pleated construction • Available in 3” through 15” diameter • Available in Standard and Long Radius • Available in 30, 45, 60, and 90 Degree • Available in Galvanized only

Dia.

Degree CLR

11" 11" 11" 11" 12" 12" 12" 12" 13" 13" 13" 13" 14" 14" 14" 14" 15" 15" 15" 15"

90 60 45 30 90 60 45 30 90 60 45 30 90 60 45 30 90 60 45 30

27-1/2 27-1/2 27-1/2 27-1/2 30 30 30 30 32-1/2 32-1/2 32-1/2 32-1/2 35 35 35 35 37-1/2 37-1/2 37-1/2 37-1/2

Gauge

20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20

Part no.

FD-PW1102 FD-PW1106 FD-PW1101 FD-PW1103 FD-PW1202 FD-PW1206 FD-PW1201 FD-PW1203 FD-PW1302 FD-PW1306 FD-PW1301 FD-PW1303 FD-PW1402 FD-PW1406 FD-PW1401 FD-PW1403 FD-PW1502 FD-PW1506 FD-PW1501 FD-PW1503

• NOT AVAILABLE IN STAINLESS STEEL

24

© 2002 H-P Products, Inc.

Can’t Find What You Need? Call Us! Catalog Part Variations Available Upon Request.

Flanged End Fittings When Ordering, Please Specify Type of Material:

90º Branches

YL Branches

(Tee on Taper)

(Tee on Taper)

• Available in 3” through 48” Diameter

• Available in 3” through 48” Diameter • Available in 30 & 45 Degree

Dia.

Degree

Gauge

Part No.

3" 4" 5" 6" 7" 8" 9" 10" 11" 12" 13" 14" 15” 16" 17" 18" 19" 20" 22" 24" 26" 28" 30" 32" 34" 36" 38" 40" 42" 44" 46" 48"

90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90

18 18 18 18 18 18 18 18 18 18 18 18 18 18 18 18 18 18 18 18 18 18 16 16 16 16 16 16 16 16 16 16

FD-18TEE300 FD-18TEE400 FD-18TEE500 FD-18TEE600 FD-18TEE700 FD-18TEE800 FD-18TEE900 FD-18TEE1000 FD-18TEE1100 FD-18TEE1200 FD-18TEE1300 FD-18TEE1400 FD-18TEE1500 FD-18TEE1600 FD-18TEE1700 FD-18TEE1800 FD-18TEE1900 FD-18TEE2000 FD-18TEE2200 FD-18TEE2400 FD-18TEE2600 FD-18TEE2800 FD-16TEE3000 FD-16TEE3200 FD-16TEE3400 FD-16TEE3600 FD-16TEE3800 FD-16TEE4000 FD-16TEE4200 FD-16TEE4400 FD-16TEE4600 FD-16TEE4800

Dia.

Degree

Gauge

Part No.

3" 3" 4" 4" 5" 5" 6" 6" 7" 7" 8" 8" 9" 9" 10" 10" 11" 11" 12" 12" 13" 13" 14" 14" 15" 15" 16" 16" 17" 17" 18" 18" 19" 19" 20" 20" 22" 22" 24" 24" 26" 26" 28" 28"

30 45 30 45 30 45 30 45 30 45 30 45 30 45 30 45 30 45 30 45 30 45 30 45 30 45 30 45 30 45 30 45 30 45 30 45 30 45 30 45 30 45 30 45

18 18 18 18 18 18 18 18 18 18 18 18 18 18 18 18 18 18 18 18 18 18 18 18 18 18 18 18 18 18 18 18 18 18 18 18 18 18 18 18 18 18 18 18

FD-18YL3003 FD-18YL3001 FD-18YL4003 FD-18YL4001 FD-18YL5003 FD-18YL5001 FD-18YL6003 FD-18YL6001 FD-18YL7003 FD-18YL7001 FD-18YL8003 FD-18YL8001 FD-18YL9003 FD-18YL9001 FD-18YL10003 FD-18YL10001 FD-18YL11003 FD-18YL11001 FD-18YL12003 FD-18YL12001 FD-18YL13003 FD-18YL13001 FD-18YL14003 FD-18YL14001 FD-18YL15003 FD-18YL15001 FD-18YL16003 FD-18YL16001 FD-18YL17003 FD-18YL17001 FD-18YL18003 FD-18YL18001 FD-18YL19003 FD-18YL19001 FD-18YL20003 FD-18YL20001 FD-18YL22003 FD-18YL22001 FD-18YL24003 FD-18YL24001 FD-18YL26003 FD-18YL26001 FD-18YL28003 FD-18YL28001

H-P Products, Inc. • 800.860.TUBE (8823) Fax: 330.875.7155 • www.metflo.com

© 2002 H-P Products, Inc.

• Stainless • Galvanized Steel

90° Branch

YL Branch

• Available in larger sizes, call for pricing

25

Flanged End Fittings When Ordering, Please Specify Type of Material: • Stainless • Galvanized Steel

Double YL Branch • Available in larger sizes, call for pricing

26

YL Branches cont.

Double YL Branches

Dia. onDegree (Tee Taper)CLR

• Available in 3” through 48” Diameter • Available in 30 and 45 Degree

Gauge

Part no.

• Available in 3” through 48” Diameter • Available in 30 and 45 Degree Dia.

Degree

Gauge

Part no.

30" 30" 32" 32" 34" 34" 36" 36" 38" 38" 40" 40" 42" 42" 44" 44" 46" 46" 48" 48"

30 45 30 45 30 45 30 45 30 45 30 45 30 45 30 45 30 45 30 45

16 16 16 16 16 16 16 16 16 16 16 16 16 16 16 16 16 16 16 16

FD-16YL30003 FD-16YL30001 FD-16YL32003 FD-16YL32001 FD-16YL34003 FD-16YL34001 FD-16YL36003 FD-16YL36001 FD-16YL38003 FD-16YL38001 FD-16YL40003 FD-16YL40001 FD-16YL42003 FD-16YL42001 FD-16YL44003 FD-16YL44001 FD-16YL46003 FD-16YL46001 FD-16YL48003 FD-16YL48001

© 2002 H-P Products, Inc.

Dia.

Degree

Gauge

Part No.

3" 3" 4" 4" 5" 5" 6" 6" 7" 7" 8" 8" 9" 9" 10" 10" 11" 11" 12" 12" 13" 13" 14" 14" 15" 15" 16" 16" 17" 17" 18" 18" 19" 19" 20" 20" 22" 22" 24" 24" 26" 26" 28" 28" 30" 30" 32" 32"

30 45 30 45 30 45 30 45 30 45 30 45 30 45 30 45 30 45 30 45 30 45 30 45 30 45 30 45 30 45 30 45 30 45 30 45 30 45 30 45 30 45 30 45 30 45 30 45

18 18 18 18 18 18 18 18 18 18 18 18 18 18 18 18 18 18 18 18 18 18 18 18 18 18 18 18 18 18 18 18 18 18 18 18 18 18 18 18 18 18 18 18 16 16 16 16

FD-18DYL3003 FD-18DYL3001 FD-18DYL4003 FD-18DYL4001 FD-18DYL5003 FD-18DYL5001 FD-18DYL6003 FD-18DYL6001 FD-18DYL7003 FD-18DYL7001 FD-18DYL8003 FD-18DYL8001 FD-18DYL9003 FD-18DYL9001 FD-18DYL10003 FD-18DYL10001 FD-18DYL11003 FD-18DYL11001 FD-18DYL12003 FD-18DYL12001 FD-18DYL13003 FD-18DYL13001 FD-18DYL14003 FD-18DYL14001 FD-18DYL15003 FD-18DYL15001 FD-18DYL16003 FD-18DYL16001 FD-18DYL17003 FD-18DYL17001 FD-18DYL18003 FD-18DYL18001 FD-18DYL19003 FD-18DYL19001 FD-18DYL20003 FD-18DYL20001 FD-18DYL22003 FD-18DYL22001 FD-18DYL24003 FD-18DYL24001 FD-18DYL26003 FD-18DYL26001 FD-18DYL28003 FD-18DYL28001 FD-16DYL30003 FD-16DYL30001 FD-16DYL32003 FD-16DYL32001

Can’t Find What You Need? Call Us! Catalog Part Variations Available Upon Request.

Flanged End Fittings Double YL cont.

Double Y Branches • Used to join 2 branches to the main angle of 30 or 45 Degrees.

• Available in 4” through 48” Diameter

Dia.

Degree

Gauge

Part no.

34" 34" 36" 36" 38" 38" 40" 40" 42" 42" 44" 44" 46" 46" 48" 48"

30 45 30 45 30 45 30 45 30 45 30 45 30 45 30 45

16 16 16 16 16 16 16 16 16 16 16 16 16 16 16 16

FD-16DYL34003 FD-16DYL34001 FD-16DYL36003 FD-16DYL36001 FD-16DYL38003 FD-16DYL38001 FD-16DYL40003 FD-16DYL40001 FD-16DYL42003 FD-16DYL42001 FD-16DYL44003 FD-16DYL44001 FD-16DYL46003 FD-16DYL46001 FD-16DYL48003 FD-16DYL48001

Dia.

Degree

Gauge

Part No.

4" 4" 5" 5" 6" 6" 7" 7" 8" 8" 9" 9" 10" 10" 11" 11" 12" 12" 13" 13" 14" 14" 15" 15" 16" 16" 17" 17" 18" 18" 19" 19" 20" 20" 22" 22" 24" 24" 26" 26" 28" 28" 30" 30" 32" 32"

30 45 30 45 30 45 30 45 30 45 30 45 30 45 30 45 30 45 30 45 30 45 30 45 30 45 30 45 30 45 30 45 30 45 30 45 30 45 30 45 30 45 30 45 30 45

18 18 18 18 18 18 18 18 18 18 18 18 18 18 18 18 18 18 18 18 18 18 18 18 18 18 18 18 18 18 18 18 18 18 18 18 18 18 18 18 18 18 16 16 16 16

FD-18DY4003 FD-18DY4001 FD-18DY5003 FD-18DY5001 FD-18DY6003 FD-18DY6001 FD-18DY7003 FD-18DY7001 FD-18DY8003 FD-18DY8001 FD-18DY9003 FD-18DY9001 FD-18DY10003 FD-18DY10001 FD-18DY11003 FD-18DY11001 FD-18DY12003 FD-18DY12001 FD-18DY13003 FD-18DY13001 FD-18DY14003 FD-18DY14001 FD-18DY15003 FD-18DY15001 FD-18DY16003 FD-18DY16001 FD-18DY17003 FD-18DY17001 FD-18DY18003 FD-18DY18001 FD-18DY19003 FD-18DY19001 FD-18DY20003 FD-18DY20001 FD-18DY22003 FD-18DY22001 FD-18DY24003 FD-18DY24001 FD-18DY26003 FD-18DY26001 FD-18DY28003 FD-18DY28001 FD-16DY30003 FD-16DY30001 FD-16DY32003 FD-16DY32001

H-P Products, Inc. • 800.860.TUBE (8823) Fax: 330.875.7155 • www.metflo.com

© 2002 H-P Products, Inc.

When Ordering, Please Specify Type of Material: • Stainless • Galvanized Steel

Double Y Branch • Available in larger sizes, call for pricing

27

Flanged End Fittings When Ordering, Please Specify Type of Material: • Stainless • Galvanized Steel

Flanged End Reducers • Available in larger sizes, call for pricing

Double Y Branches cont. Flanged End Reducers Dia.

Degree

Gauge

Part no.

34" 34" 36" 36" 38" 38" 40" 40" 42" 42" 44" 44" 46" 46" 48" 48"

30 45 30 45 30 45 30 45 30 45 30 45 30 45 30 45

16 16 16 16 16 16 16 16 16 16 16 16 16 16 16 16

FD-16DY34003 FD-16DY34001 FD-16DY36003 FD-16DY36001 FD-16DY38003 FD-16DY38001 FD-16DY40003 FD-16DY40001 FD-16DY42003 FD-16DY42001 FD-16DY44003 FD-16DY44001 FD-16DY46003 FD-16DY46001 FD-16DY48003 FD-16DY48001

Flanged End Adapters • Available in 3” through 22” Diameter

Flanged End Adapters

Dia.

Length

Gauge

Part No.

3"* 4"* 5"* 6"* 7" 8" 9" 10" 11" 12" 13" 14" 15" 16" 17" 18" 19" 20" 22"

8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8

24 24 24 24 22 22 22 22 22 22 20 20 20 20 20 20 20 20 20

FD-AD300 FD-AD400 FD-AD500 FD-AD600 FD-AD700 FD-AD800 FD-AD900 FD-AD1000 FD-AD1100 FD-AD1200 FD-AD1300 FD-AD1400 FD-AD1500 FD-AD1600 FD-AD1700 FD-AD1800 FD-AD1900 FD-AD2000 FD-AD2200

• Available in all diameters • Reducers are prices by the large end • Length is determined by the dimension of the reducer Dia.

Gauge

Part No.

3" 4" 5" 6" 7" 8" 9" 10" 11" 12" 13" 14" 15" 16" 17" 18" 19" 20" 22" 24" 26" 28 30" 32" 34" 36" 38" 40" 42" 44" 46" 48"

20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 18 18 18 16 16 16 16 16 16 16 16 16 16

FD-RC300 FD-RC400 FD-RC500 FD-RC600 FD-RC700 FD-RC800 FD-RC900 FD-RC1000 FD-RC1100 FD-RC1200 FD-RC1300 FD-RC1400 FD-RC1500 FD-RC1600 FD-RC1700 FD-RC1800 FD-RC1900 FD-RC2000 FD-RC2200 FD-RC2400 FD-RC2600 FD-RC2800 FD-RC3000 FD-RC3200 FD-RC3400 FD-RC3600 FD-RC3800 FD-RC4000 FD-RC4200 FD-RC4400 FD-RC4600 FD-RC4800

* 3”– 6” IS 22 GAUGE IN STAINLESS STEEL

28

© 2002 H-P Products, Inc.

Can’t Find What You Need? Call Us! Catalog Part Variations Available Upon Request.

Flanged End Supplemental Components Blast Gates • Airtight Seal • May be used with positive or negative pressure • Not to be used if material is in the air stream • Available in 3” through 22” in Diameter Dia.

Stub

Gauge

Part No.

3" 4" 5" 6" 7" 8" 9" 10" 11" 12" 13" 14" 15" 16" 17" 18" 19" 20" 22"

2-1/2" 2-1/2" 2-1/2" 2-1/2" 2-1/2" 2-1/2" 2-1/2" 2-1/2" 2-1/2" 2-1/2" 2-1/2" 2-1/2" 2-1/2" 2-1/2" 2-1/2" 2-1/2" 2-1/2" 2-1/2" 2-1/2"

14 14 14 14 14 14 14 14 14 14 14 14 14 14 14 14 14 14 14

FD-BG14300 FD-BG14400 FD-BG14500 FD-BG14600 FD-BG14700 FD-BG14800 FD-BG14900 FD-BG141000 FD-BG141100 FD-BG141200 FD-BG141300 FD-BG141400 FD-BG141500 FD-BG141600 FD-BG141700 FD-BG141800 FD-BG141900 FD-BG142000 FD-BG142200

• STUB LENGTH IS PER SIDE

Cut-Offs • Available in 3” through 22” Diameter Dia.

Length

Gauge

Part No.

3"* 4"* 5"* 6"* 7" 8" 9" 10" 11" 12" 14" 16" 18" 20" 22"

2-1/2" 2-1/2" 2-1/2" 2-1/2" 2-1/2" 2-1/2" 2-1/2" 2-1/2" 2-1/2" 2-1/2" 2-1/2" 2-1/2" 2-1/2" 2-1/2" 2-1/2"

26 24 24 24 22 22 22 22 22 22 20 20 20 20 20

FD-CF300 FD-CF400 FD-CF500 FD-CF600 FD-CF700 FD-CF800 FD-CF900 FD-CF1000 FD-CF1100 FD-CF1200 FD-CF1400 FD-CF1600 FD-CF1800 FD-CF2000 FD-CF2200

When Ordering, Please Specify Type of Material:

Rectangular to Round Transitions • Available in 3” through 48” Diameter • Available with or without flanges Diameter

Gauge

Part No.

3" 4" 5" 6" 7" 8" 9" 10" 11" 12" 13" 14" 15" 16" 17" 18" 19" 20" 22" 24" 26" 28" 30" 32" 34" 36" 38" 40" 42" 44" 46" 48"

20 20 20 20 20 20 20 20 20 20 20 20 18 18 18 18 18 18 18 18 18 18 16 16 16 16 16 16 16 16 16 16

FD-RRT300 FD-RRT400 FD-RRT500 FD-RRT600 FD-RRT700 FD-RRT800 FD-RRT900 FD-RRT1000 FD-RRT1100 FD-RRT1200 FD-RRT1300 FD-RRT1400 FD-RRT1500 FD-RRT1600 FD-RRT1700 FD-RRT1800 FD-RRT1900 FD-RRT2000 FD-RRT2200 FD-RRT2400 FD-RRT2600 FD-RRT2800 FD-RRT3000 FD-RRT3200 FD-RRT3400 FD-RRT3600 FD-RRT3800 FD-RRT4000 FD-RRT4200 FD-RRT4400 FD-RRT4600 FD-RRT4800

• Stainless • Galvanized Steel

Blast Gate

Cut Off (full)

Cut Off (half)

Rectangular to Round Transition

* 3”– 6” IS 22 GAUGE IN STAINLESS STEEL

H-P Products, Inc. • 800.860.TUBE (8823) Fax: 330.875.7155 • www.metflo.com

© 2002 H-P Products, Inc.

29

Flanged End Supplemental Components When Ordering, Please Specify Type of Material: • Stainless • Galvanized Steel

45° In Cut

90° In Cut

30

In-Cuts In-Cuts cont.

• Available in 3” through 48” in Diameter Diameter Degree

Gauge

Part No.

Dia.

Degree

Gauge

Part no.

3" 3" 3" 4" 4" 4" 5" 5" 5" 6" 6" 6" 7" 7" 7" 8" 8" 8" 9" 9" 9" 10" 10" 10" 11" 11" 11" 12" 12" 12" 13" 13" 13" 14" 14" 14" 15" 15" 15" 16" 16" 16" 17" 17" 17" 18" 18" 18"

18 18 18 18 18 18 18 18 18 18 18 18 18 18 18 18 18 18 18 18 18 18 18 18 18 18 18 18 18 18 18 18 18 18 18 18 18 18 18 18 18 18 18 18 18 18 18 18

FD-90CUT300 FD-45CUT300 FD-30CUT300 FD-90CUT400 FD-45CUT400 FD-30CUT400 FD-90CUT500 FD-45CUT500 FD-30CUT500 FD-90CUT600 FD-45CUT600 FD-30CUT600 FD-90CUT700 FD-45CUT700 FD-30CUT700 FD-90CUT800 FD-45CUT800 FD-30CUT800 FD-90CUT900 FD-45CUT900 FD-30CUT900 FD-90CUT1000 FD-45CUT1000 FD-30CUT1000 FD-90CUT1100 FD-45CUT1100 FD-30CUT1100 FD-90CUT1200 FD-45CUT1200 FD-30CUT1200 FD-90CUT1300 FD-45CUT1300 FD-30CUT1300 FD-90CUT1400 FD-45CUT1400 FD-30CUT1400 FD-90CUT1500 FD-45CUT1500 FD-30CUT1500 FD-90CUT1600 FD-45CUT1600 FD-30CUT1600 FD-90CUT1700 FD-45CUT1700 FD-30CUT1700 FD-90CUT1800 FD-45CUT1800 FD-30CUT1800

19" 19" 19" 20" 20" 20" 22" 22" 22" 24" 24" 24" 26" 26" 26" 28" 28" 28" 30" 30" 30" 32" 32" 32" 34" 34" 34" 36" 36" 36" 38" 38" 38" 40" 40" 40" 42" 42" 42" 44" 44" 44" 46" 46" 46" 48" 48" 48"

90 45 30 90 45 30 90 45 30 90 45 30 90 45 30 90 45 30 90 45 30 90 45 30 90 45 30 90 45 30 90 45 30 90 45 30 90 45 30 90 45 30 90 45 30 90 45 30

18 18 18 18 18 18 18 18 18 18 18 18 18 18 18 18 18 18 16 16 16 16 16 16 16 16 16 16 16 16 16 16 16 16 16 16 16 16 16 16 16 16 16 16 16 16 16 16

FD-90CUT1900 FD-45CUT1900 FD-30CUT1900 FD-90CUT2000 FD-45CUT2000 FD-30CUT2000 FD-90CUT2200 FD-45CUT2200 FD-30CUT2200 FD-90CUT2400 FD-45CUT2400 FD-30CUT2400 FD-90CUT2600 FD-45CUT2600 FD-30CUT2600 FD-90CUT2800 FD-45CUT2800 FD-30CUT2800 FD-90CUT3000 FD-45CUT3000 FD-30CUT3000 FD-90CUT3200 FD-45CUT3200 FD-30CUT3200 FD-90CUT3400 FD-45CUT3400 FD-30CUT3400 FD-90CUT3600 FD-45CUT3600 FD-30CUT3600 FD-90CUT3800 FD-45CUT3800 FD-30CUT3800 FD-90CUT4000 FD-45CUT4000 FD-30CUT4000 FD-90CUT4200 FD-45CUT4200 FD-30CUT4200 FD-90CUT4400 FD-45CUT4400 FD-30CUT4400 FD-90CUT4600 FD-45CUT4600 FD-30CUT4600 FD-90CUT4800 FD-45CUT4800 FD-30CUT4800

90 45 30 90 45 30 90 45 30 90 45 30 90 45 30 90 45 30 90 45 30 90 45 30 90 45 30 90 45 30 90 45 30 90 45 30 90 45 30 90 45 30 90 45 30 90 45 30

© 2002 H-P Products, Inc.

Can’t Find What You Need? Call Us! Catalog Part Variations Available Upon Request.

When Ordering, Please Specify Type of Material:

Notes

• Stainless • Galvanized Steel

H-P Products, Inc. • 800.860.TUBE (8823) Fax: 330.875.7155 • www.metflo.com

© 2002 H-P Products, Inc.

31

512 West Gorgas St. / P.O. Box 3912 Louisville, Ohio 44641-3912 1.800.860.TUBE (8823) 330.875.7155 fax www.metflo.com Š 2002 H-P Products, Inc. S-120-0048