Service - Quality - Integrity
Table of Contents MDF - Primed, Raw .............................. 1 Pine - Raw, Primed Solid .................... 17 Hardwoods ......................................... 36 Knotty Alder ........................................ 45 Doug Fir/Redwood.............................. 52 Paint Grade ........................................ 56 Particle Board Shelving ...................... 58 Pine Clears/Commons & Furring Strips .............................. 59
OrePac Building Products 8185 Signal Court Sacramento, CA 95824 Phone: 916-381-8051 Fax: 916-381-4059 www.orepac.com
Pacific Pine Patterns .......................... 60 C & Btr Clear Douglas Fir ................... 61 Flexible Moulding................................ 62
Care and handling of Millwork Unfinished woodwork is vulnerable! Apply finish as soon as possible following the manufacturer’s finishing instructions.
with concrete. The natural tendency of concrete to absorb moisture can create a “wicking” of moisture out of the air or the ground and into the wood.
Never expose unpainted millwork to direct sunlight!
Mouldings must be acclimated 72 hours prior to installation, mouldings should be unbundled and allowed to acclimate to the environment in the room in which they will be installed, with a controlled humidity level. The humidity at the time of acclimation should be similar to the humidity expected upon occupancy of the project.
Always protect unfinished millwork from moist conditions. Never store on the ground, on concrete, or where rain can blow in. All mouldings should be stored horizontally off the floor and in a dry location It’s critical to protect millwork from direct sunlight prior to finishing to avoid rapid drying and bleaching. Even a few hours exposure to direct sunlight causes drying and bleaching. Millwork must be stored in a dry area away from excess heat. Never store on the ground, nor allow wood to come into direct contact
B
Finishing Light sanding is required prior to finishing. Follow manufacturer’s recommended instructions for your product type.
Moulding images are approximate in scale.
Service - Quality - Integrity Primed MDF - Raw MDF
Base
Del Mar Primed MDF F41024116 9/16” x 4-1/2” x 16’
Sierra
Carmichael Primed MDF F41023216 9/16” x 5-1/4” x 16’
Round Edge
Vintage Primed MDF F41016316 5/8” x 5-1/4” x 16’
Primed MDF F41020616 1/2” x 5-1/2” x 16’
Primed MDF F41021616 9/16” x 3-1/4” x 16’ F41021816 9/16” x 5-1/4” x 16’ F41071416 9/16” x 7-1/4” x 16’
F41066316 5/8” x 6-1/8” x 16’
Moulding images are approximate in scale.
1
Service - Quality - Integrity Primed MDF - Raw MDF
Base
Victorian Primed MDF F41024716 9/16” x 4” x 16’
Victorian
Georgian
Primed MDF F41024516 9/16” x 5-1/4” x 16’
Primed MDF F41025516 9/16” x 5-1/4” x 16’
Santa Fe Primed MDF F41026016 9/16” x 3-3/8” x 16’ F41026116 9/16” x 4-1/2” x 16’ F41026216 9/16” x 5-3/8” x 16’
2
Moulding images are approximate in scale.
Service - Quality - Integrity Primed MDF - Raw MDF
Base
Harris Primed MDF F41051416 9/16” x 5-1/4” x 16’
Bull Nose Primed MDF F41049616 1/2” x 5-1/2” x 16’
Monterey Primed MDF F410312M16 9/16” x 5-1/4” x 16’ F41031316 9/16” x 7-1/4” x 16’
Moulding images are approximate in scale.
Savannah Primed MDF F41061216 5/8” x 6-1/2” x 16’
Malibu Primed MDF F41060516 5/8” x 7-1/4” x 16’
3
Service - Quality - Integrity Primed MDF - Raw MDF
Base
Colonial Primed MDF F41062316 9/16” x 3-1/4” x 16’ F41062016 9/16” x 4-1/4” x 16’ F41061816 9/16” x 5-1/4” x 16’
Imperial Primed MDF F41025716 5/8” x 6” x 16’
Plinth
Legacy Primed MDF F41092516 1” x 9-1/4” x 16’ Image is not to scale
4
Reversible
Primed MDF F41029916 3/4” x 6-1/2” x 16’
Primed MDF F41321416 3/8” x 2-1/4” x 16’
Moulding images are approximate in scale.
Service - Quality - Integrity Primed MDF - Raw MDF
Casing
Bayshore Primed MDF F42003217 5/8” x 2-1/2” x 17’
Mission
MacKenzie
Primed MDF F420068A17 3/4” x 3-1/4” x 17’
Primed MDF F42013417 5/8” x 2-1/2” x 17’ F42013517 5/8” x 3-1/2” x 17’
Belvedere Primed MDF F420069A17 1-3/16” x 4-1/2” x 17’
Santa Fe Primed MDF F42000817 11/16” x 2-7/16” x 17’ F42012517 1-1/16” x 3-7/16” x 17’
Moulding images are approximate in scale.
Moulded Primed MDF F42035417 5/8” x 1-5/8” x 17’
5
Service - Quality - Integrity Primed MDF - Raw MDF
Casing
Riviera Primed MDF F42038568 5/8” x 2-1/2” x 7’
Carolina
49er
Howe
Primed MDF F42038817 11/16” x 3-1/4” x 17’
Primed MDF F42490017 1” x 3-1/4” x 17’
Primed MDF F42036717 3/4” x 2-7/16” x 17’
F42038517 5/8” x 2-1/2” x 17’
F42033817 1” x 3-1/4” x 17’
Colonial Primed MDF F42035617 5/8” x 2-1/4” x 17’
F42035686M - Mitered 5/8” x 2-1/4” x 8’6”
F42035668 5/8” x 2-1/4” x 7’
F420356S - Mitered Set 5/8” x 2-1/4” x 7’
F42035668M - Mitered F420444A17 5/8” x 2-1/4” x 7’ 5/8” x 3-1/8” x 17’ F42035686 5/8” x 2-1/4” x 8’6”
Montana Primed MDF F42006617 5/8” x 3-1/4” x 17’
6
Moulding images are approximate in scale.
Service - Quality - Integrity Primed MDF - Raw MDF
Casing
Lancaster
Round Edge
Primed MDF F42041717 1-3/16” x 3-3/16” x 17’
Flute & Reed
Primed MDF F42047317 9/16” x 2-1/4” x 17’
Primed MDF F420214F17 11/16” x 2-1/4” x 17’
F42043317 9/16” x 3-1/4” x 17’
F420338F17 5/8” x 3-3/8” x 17’
Monterey
Del Mar
Primed MDF F42014017 11/16” x 3-1/4” x 17’
Primed MDF F42040617 5/8” x 3” x 17’
Moulding images are approximate in scale.
7
Service - Quality - Integrity Primed MDF - Raw MDF
Casing Bevel Primed MDF F42015868 9/16” x 1-5/8” x 7’ F420158M68 - Mitered 9/16” x 1-5/8” x 7’ F420158S - Mitered Set 9/16” x 1-5/8” x 7’
8
F42015817 9/16” x 1-5/8” x 17’
Victorian
F42032417 9/16” x 2-1/4” x 17’
Primed MDF F42042017 11/16” x 2-1/2” x 17’
Victorian
Georgian
Belmont
Victorian
Primed MDF F42040417 5/8” x 3” x 17’
Primed MDF F42040817 11/16” x 3-9/16” x 17’
Primed MDF F42040317 1” x 3-1/2” x 17’
Primed MDF F42039517 3/4” x 3-1/2” x 17’
Moulding images are approximate in scale.
Service - Quality - Integrity Primed MDF - Raw MDF
Crown
Venetian Crown Crown Primed MDF F43005216 9/16” x 2-3/4” x 16’
Primed MDF F43030516 1” x 8” x 16’
F43004916 5/8” x 3-5/8” x 16’ F43004816 5/8” x 4-1/4” x 16’ F43004516 5/8” x 5-1/4” x 16’ F43004316 5/8” x 7-1/4” x 16’
Moulding images are approximate in scale.
9
Service - Quality - Integrity Primed MDF - Raw MDF
Crown
Crown Primed MDF F43030716 3/4” x 6-7/16” x 16’
Double Beaded Crown Primed MDF F43034016 11/16” x 3-7/16” x 16’ F43034116 1-1/4” x 7-3/16” x 16’
10
Service - Quality - Integrity Primed MDF - Raw MDF
Crown
Cornice Primed MDF F43031016 1” x 6” x 16’
Coronado Primed MDF F43032616 7/8” x 4-1/4” x 16’ F43034216 7/8” x 6-1/2” x 16’
Charleston Primed MDF F43032716 3/4” x 6” x 16’
11
Service - Quality - Integrity Primed MDF - Raw MDF
Crown
Regal Primed MDF F43032916 1-3/16” x 6-5/16” x 16’
Pediment Primed MDF F43060716 1-1/4” x 1-1/2” x 16’
12
Pediment Primed MDF F43061316 1-1/4” x 3” x 16’
Moulding images are approximate in scale.
Service - Quality - Integrity Primed MDF - Raw MDF
Miscellaneous
Wainscot Cap Primed MDF F49005112 1-1/8” x 1-3/4” x 12’
OG Stool Raw MDF F271021434 11/16” x 4-3/4” x 16’
Wainscot Cap
F2710215 11/16” x 5-1/4” x 16’
Primed MDF F49013516 3/4” x 2” x 16’
Wainscot Primed MDF F49005010 3/8” x 5-3/4” x 10’
Wainscot Primed MDF F49013416 5/8” x 3-5/16” x 16’
Moulding images are approximate in scale.
F2710217 11/16” x 7-1/4” x 16’ Primed MDF F471021416 11/16” x 4-3/4” x 16’ F471021516 11/16” x 5-1/4” x 16’ F471021716 11/16” x 7-1/4” x 16’
13
Service - Quality - Integrity Primed MDF - Raw MDF
Miscellaneous
Chair Rail Primed MDF F43053316 11/16” x 1-34” x 16’
Chair Rail Primed MDF F43029716 11/16” x 3” x 16’
E2E Primed MDF F46010216 11/16” x 1-1/2” x 16’ F46010316 11/16” x 2-1/2” x 16’ F46010416 11/16” x 3-1/2” x 16’ F46010616 11/16” x 5-1/2” x 16’ F46010816 11/16” x 7-1/4” x 16’
OG 2 Edge Cap
F46011216 11/16” x 11-1/4” x 16’
Chair Rail
Raw MDF F270714OG2 11/16” x 7-1/4” x 16’
F46110616 1/2” x 5-1/8” x 16”
Primed MDF F43039016 11/16” x 2-7/16” x 16’
14
Moulding images are approximate in scale.
Service - Quality - Integrity Primed MDF - Raw MDF
Miscellaneous S4S Raw MDF F261216 11/16” x 11-1/4” x 16’ F261616 11/16” x 16” x 16’
Cleat Raw MDF F260250 9/16” x 1-1/2” x 16’ F26025008 9/16” x 1-1/2” x 8’
F2630.510 11/16” x 30-1/4” x 10’ Primed MDF F46111016 11/16” x 9-1/2” x 16’ Image is not to scale
Hook Strip Raw MDF F290433 9/16” x 3-1/4” x 16’ F29043308 9/16” x 3-1/4” x 8’
E4E Chair Rail
Raw MDF F270714E4E 1-1/4” x 7-1/4” x 16’
Primed MDF F43339716 1” x 3-1/2” x 16’
F260212 1-1/4” x 11-1/4” x 16’
Moulding images are approximate in scale.
15
Service - Quality - Integrity Primed MDF - Raw MDF
Jambs /Stops Interior Jamb Primed MDF F470496 11/16” x 4-9/16” x 16’ F47049668 - Pair 11/16” x 4-9/16” x 6’8” F47049680 - Pair 11/16” x 4-9/16” x 8’ F47041368 - Pair 11/16” x 4-13/16” x 6’8” F47041380 - Pair 11/16” x 4-13/16” x 8’ F47051468 - Pair 11/16” x 5-1/4” x 6’8” F47051480 - Pair 11/16” x 5-1/4” x 8’
Two Round Edge Stop Primed MDF F45087668 1/2” x 1-3/8” x 7’ F45087680 1/2” x 1-3/8” x 8’
F47061968 - Pair 11/16” x 6-9/16” x 6’8” F47071468 - Pair 11/16” x 7-1/4” x 6’8” F47071480 - Pair 11/16” x 7-1/4” x 8’
One Round Edge Stop Raw MDF F25087717 7/16” x 1-1/4” x 17’ Primed MDF F45087717 7/16” x 1-1/4” x 17’ F45087768 7/16” x 1-1/4” x 7’
16
Moulding images are approximate in scale.
Service - Quality - Integrity Raw / Primed / Solid - Pine
Base
Base Shoe
Base Cap
Primed Fingerjoint P310126 1/2” x 3/4” Solid Pine P110126 1/2” x 3/4”
Solid Pine P110172 9/16” x 3/4”
Base Cap Primed Fingerjoint P390503 11/16” x 1-3/8” Solid Pine P190163 11/16” x 1-3/8”
Edgewood Primed Fingerjoint P310210 11/16” x 3-1/4”
Estate Primed Fingerjoint P310182 11/16” x 5-1/4”
P310211 11/16” x 5-3/16”
Montecito
Moulded
Primed Fingerjoint P310014 9/16” x 3-1/4”
Primed Fingerjoint P310219 3/8” x 3-1/4”
Moulding images are approximate in scale.
17
Service - Quality - Integrity Raw / Primed / Solid - Pine
Base
Streamline Primed Fingerjoint P310726 1/2” x 2-1/4” Solid Pine P110726 1/2” x 2-1/4” P110723 1/2” x 3-1/4”
Riviera
Harris
Primed Fingerjoint P610314 9/16” x 3-1/4”
Primed Fingerjoint P310514HB 11/16” x 5-1/4”
P310414RV 9/16” x 4-1/4”
Santa Fe Primed Fingerjoint P310203SF 9/16” x 3-1/2” P310233SB 9/16” x 4-1/2” P310232SB 9/16” x 5-7/16”
Victorian Primed Fingerjoint P310514VB 11/16” x 5-1/4”
P310514RV 9/16” x 5-1/4”
18
Moulding images are approximate in scale.
Service - Quality - Integrity Raw / Primed / Solid - Pine
Base Reversible
Solana
Raw Fingerjoint P213214 3/8” x 2-1/4”
Primed Fingerjoint P310416 11/16” x 4-1/4”
P213314 3/8” x 3-1/4” Primed Fingerjoint P313214 3/8” x 2-1/4” P313314 3/8” x 3-1/4” P312214 1/2” x 2-1/4” P312314 1/2” x 3-1/4” Solid Pine P113214 3/8” x 2-1/4” P113314 3/8” x 3-1/4” P112214 1/2” x 2-1/4” P112314 1/2” x 3-1/4”
Colonial Raw Fingerjoint P210623 9/16” x 3-1/4” Primed Fingerjoint P310623 9/16” x 3-1/4” P310620 9/16” x 4-1/4” P310618 9/16” x 5-1/4”
Round Edge Primed Fingerjoint P310496 1/2” x 5-1/2”
Moulding images are approximate in scale.
Solid Pine P110623 9/16” x 3-1/4” P110618 9/16” x 5-1/4”
19
Service - Quality - Integrity Raw / Primed / Solid - Pine
Casing
Oval Primed Fingerjoint P320158O 5/8” x 1-5/8” P320324O 5/8” x 2-1/4”
Sierra
Santa Fe
Primed Fingerjoint P320392SC 1” x 3-1/2”
Primed Fingerjoint P320154 11/16” x 2-7/16” P320393 1-1/16” x 3-1/2”
20
Solid Pine P120158O 9/16” x 1-5/8” P120214O 9/16” x 2-1/4”
Montana
Estate
Primed Fingerjoint P320111 11/16” x 2-7/16”
Primed Fingerjoint P320212E 11/16” x 2-1/2”
Moulding images are approximate in scale.
Service - Quality - Integrity Raw / Primed / Solid - Pine
Casing Colonial Raw Fingerjoint P220356A 11/16” x 1-5/8” x 17’
Primed Fingerjoint P320356 5/8” x 2-1/4” x 17’
P220356A68 - Pair 11/16” x 1-5/8” x 7’
P32035668- Pair 5/8” x 2-1/4” x 7’
P220356 11/16” x 2-1/4”
P32035668M - Pair Mitered 5/8” x 2-1/4” 7’
P320444A 5/8” x 3-1/8” x 17’ Solid Pine P22035668M - Pair Mitered P120356 11/16” x 2-1/4” x 7’ 11/16” x 2-1/4” P22035686M - Pair Mitered P12035668 - Pair 11/16” x 2-1/4” x 8’6” 11/16” x 2-1/4” x 7’ P220444A P12035668M - Pair Mitered 5/8” x 3-1/8” x 17’ 11/16” x 2-1/4” x 7’ P220444A68 - Pair P120444A 5/8” x 3-1/8” x 7’ 5/8” x 3-1/8” P220444AMP - Pair Mitered P12044472 - Pair 5/8” x 3-1/8” x 7’2” 5/8” x 3-1/8” x 7’ P22035668 - Pair 11/16” x 2-1/4” x 7’
Bevel Raw Fingerjoint P220158 5/8” x 1-5/8” x 17’
Solid Pine P120158 5/8” x 1-5/8”
P22015868 - Pair 5/8” x 1-5/8” x 7’
P12015868 - Pair 5/8” x 1-5/8” x 7’
P22015868M - Pair Mitered 5/8” x 1-5/8” x 7’
P120324 5/8” x 2-1/4”
P220324 5/8” x 2-1/4”
P12032468 - Pair 5/8” x 2-1/4” x 7’
P22032468 - Pair 5/8” x 2-1/4” x 7’ Primed Fingerjoint P320158 5/8” x 1-5/8”
Moulded Primed Fingerjoint P320238 5/8” x 1-5/8” P320240 5/8” x 2-1/4” P32023868 5/8” x 1-5/8” x 7’ P32023868M - Mitered 5/8” x 1-5/8” x 7’ Solid Pine P120240 5/8” x 2-1/4”
Step Primed Fingerjoint P320387 5/8” x 2-1/4” Solid Pine P120387A 5/8” x 1-5/8” P120387 5/8” x 2-1/4”
P32015868 - Pair 5/8” x 1-5/8” x 7’ P320324 5/8” x 2-1/4” P32032468 - Pair 5/8” x 2-1/4” x 7’
Moulding images are approximate in scale.
21
Service - Quality - Integrity Raw / Primed / Solid - Pine
Casing
Carolina
Round Edge
Primed Fingerjoint P320013 11/16” x 2-7/16”
Raw Fingerjoint P220473 9/16” x 2-1/4” Primed Fingerjoint P320473 9/16” x 2-1/4” P320433 9/16” x 3-1/4” Solid Pine P120473A 9/16” x 1-5/8” P120473 9/16” x 2-1/4”
Howe Primed Fingerjoint P320338 1-1/16” x 3-3/8”
P320388 11/16” x 3-1/4”
Flute & Reed Primed Fingerjoint P320214 11/16” x 2-1/4” P320314 11/16” x 3-1/4” P320414FR 11/16” x 4-1/4”
P12047368 - Pair 9/16” x 2-1/4” x 7’ P120433 9/16” x 3-1/4”
Andersen Primed Fingerjoint P320366 11/16” x 2-1/4”
22
Moulding images are approximate in scale.
Service - Quality - Integrity Raw / Primed / Solid - Pine
Casing
Streamline Riviera
Solid Pine P120316A 5/8” x 1-5/8”
Raw Fingerjoint P220385 11/16” x 2-1/2”
P120316 5/8” x 2-1/4”
P22038568 11/16” x 2-1/2” x 7’
49er Primed Fingerjoint P324900 1” x 3-1/4”
P22038586 11/16” x 2-1/2” x 8’6” Primed Fingerjoint P320385 5/8” x 2-1/2”
P124900 1” x 3-1/4”
P32038568 5/8” x 2-1/2” x 7’ Solid Pine P120385 11/16” x 2-1/2”
Valley
Shasta
Primed Fingerjoint P320361VC 11/16” x 3-1/2”
Primed Fingerjoint P320391 11/16” x 3-7/16”
Moulding images are approximate in scale.
23
Service - Quality - Integrity Raw / Primed / Solid - Pine
Crown
Bed Primed Fingerjoint P330609 1-7/16” x 1-3/4”
Cornice Primed Fingerjoint P330310 1-1/4” x 6”
24
Single Bead
Bed
Primed Fingerjoint P330331 11/16” x 4-9/16”
Primed Fingerjoint P330411 5/8” x 2”
Moulding images are approximate in scale.
Service - Quality - Integrity Raw / Primed / Solid - Pine
Crown
Crown Primed Fingerjoint Solid P330068 P130068 9/16” x 1-5/8” 9/16” x 1-5/8” P330052 9/16” x 2-3/4”
P130052 9/16” x 2-3/4”
P330051 9/16” x 3-1/4’
P130051 9/16” x 3-1/4’
P330049 9/16” x 3-5/8”
P130049 9/16” x 3-5/8”
P330047 11/16” x 4-5/8”
P130047 11/16” x 4-5/8”
P330045 11/16” x 5-1/4”
P130045 11/16” x 5-1/4”
Colonial Primed Fingerjoint P330611 1-1/8” x 4-3/8”
Beaded
Coronado
Primed Fingerjoint P330010 11/16” x 3-7/16”
Primed Fingerjoint P630610 3/4” x 4-3/8”
Moulding images are approximate in scale.
25
Service - Quality - Integrity Raw / Primed / Solid - Pine
Miscellaneous
Brickmould Brickmould
Brickmould with Key
Primed Fingerjoint P320180 1-1/4” x 2” Raw Fingerjoint P220180 1-1/4” x 2” Solid P120180 1-1/4” x 2”
Primed Fingerjoint P321180 1-1/4” x 2”
Primed Fingerjoint P320112BM 1-1/4” x 1-1/2”
Stucco Mould Shingle Mould Primed Fingerjoint P390158SH 5/8” x 1-5/8”
Primed Fingerjoint P390112 13/16” x 1-7/16” P39011268 13/16” x 1-7/16” x 7’ P39011268M - Mitered 13/16” x 1-7/16” x 7’ P39011280M - Mitered 13/16” x 1-7/16” x 8’
26
Moulding images are approximate in scale.
Service - Quality - Integrity Raw / Primed / Solid - Pine
Miscellaneous
Mullion/Chair Rail Chair Rail Chair Rail Primed Fingerjoint P330390 11/16” x 2-5/8” Solid P130390 11/16” x 2-5/8”
Primed Fingerjoint P330391 3/4” x 2-1/8”
Wainscot Cap Solid P190292 9/16” x 1-1/8”
Solid P130987 5/16” x 2”
Colonial Cap Primed Fingerjoint P390231 11/16” x 2”
Panel Cap Primed Fingerjoint P390520 1-7/32” x 1-1/8”
Coronado Wainscot Cap
Panel Cap
Primed Fingerjoint P390379 3/4” x 2-1/8”
Primed Fingerjoint P390525 1-3/16” x 2-3/16”
Moulding images are approximate in scale.
27
Service - Quality - Integrity Raw / Primed / Solid - Pine
Miscellaneous
Quarter Round
Solid P140123 5/16” x 5/8”
Primed Fingerjoint P340105 3/4” x 3/4” Quarter Round P140110 1/4” x 1/4”
P140122 3/8” x 3/4”
P140109 3/8” x 3/8”
P140120 1/2” x 1”
P140108 1/2” x 1/2”
Half Round Full Round Raw Fingerjoint P240233FJ 1-1/4” Solid P140290 1” x 1”
P140107 5/8” x 5/8” P140105 3/4” x 3/4” P140103 1” x 1”
28
T-Astragal Raw Fingerjoint P29130507 1-1/4” x 2” x 7’ P29130508 1-1/4” x 2” x 8’ P29130007 1-1/4” x 2-1/4” x 7’ Solid P19130508 1-1/4” x 2” x 8’
Apron
Beaded Screen
Flat Screen
Primed Fingerjoint P291716 7/16” x 1-1/2”
Solid P140140 1/4” x 3/4”
Solid P140142 1/4” x 3/4”
Moulding images are approximate in scale.
Service - Quality - Integrity Raw / Primed / Solid - Pine
Miscellaneous
Watertable Primed Fingerjoint P390128 1-3/8” x 1-9/16”
OG Stool S4S/Cleat/Hook Primed Fingerjoint Solid P160255 P360249 1/2” x 1/2” 11/16” x 1-5/8” P360366 11/16” x 3-1/4” Raw Fingerjoint P260250 9/16” x 1-1/2”
P160239 3/4” x 3/4”
P290433 9/16” x 3-1/4”
P160249 11/16” x 1-5/8”
P260249 11/16” x 1-5/8”
P160246 11/16” x 2-1/2”
P160238 1” x 1”
P160254 1/2” x 3/4”
Primed Fingerjoint P3710212 11/16” x 4-1/2” P3710214 11/16” x 4-3/4” P3710215 11/16” x 5-1/4” P3710217 11/16” x 7-1/4” P39011268M - Mitered 1-3/16” x 1-7/16” x 7’ P39011286M - Mitered 1-3/16” x 1-7/16” x 8’
P160256 1/2” x 2-1/2”
Solid P1710214 11/16” x 4-1/2”
P160257 1/2” x 3-1/2”
P1710215 11/16” x 5-1/2”
P160259 1/2” x 5-1/2”
P1710217 11/16” x 7-1/4”
Lattice Solid P140268 9/32” x 1-1/8” P140267 9/32” x 1-3/8” P140265 9/32” x 1-3/4” P140269 9/32” x 2-1/4”
Moulding images are approximate in scale.
29
Service - Quality - Integrity Raw / Primed / Solid - Pine
Miscellaneous
Cove
Colonial Outside Corner Solid P140202 1-1/8” x 1-1/8”
Sprung Cove Outside Corner Solid P140206 3/4” x 3/4”
Solid P140085 9/16” x 1-3/4”
Primed Fingerjoint P340093 3/4” x 3/4” Solid P140101 1/2” x 1/2” P140093 3/4” x 3/4”
P140205 1-1/8” x 1-1/8” P140204 1-3/8” x 1-3/8”
Linoleum Cove Solid P140992 5/8” x 1-1/2”
Picture Mould Solid P190273 11/16” x 1-3/4”
Hand Rail
Chamfer
Bead & Cove
Solid P190231 1-1/2” x 1-11/16”
Solid P190995 3/4” x 3/4”
Primed Fingerjoint P390024 1-1/4” x 1-3/4”
30
Moulding images are approximate in scale.
Service - Quality - Integrity Raw / Primed / Solid - Pine
Jambs Interior Jamb Primed Fingerjoint P370496 11/16” x 4-9/16”
Raw Fingerjoint P270476 11/16” x 4-9/16”
Veneer P17049668V 11/16” x 4-9/16” x 6/8
P37049668 11/16” x 4-9/16” x 6/8
P27049668 11/16” x 4-9/16” x 6/8
P17049680V 11/16” x 4-9/16” x 8/0
P37049680 11/16” x 4-9/16” x 8/0
P27049680 11/16” x 4-9/16” x 8/0
P17041368V 11/16” x 4-13/16” x 6/8
P37041368 11/16” x 4-13/16” x 6/8
P27043468 11/16” x 4-3/4” x 6/8
P17051468V 11/16” x 5-1/4” x 6/8
P37041380 11/16” x 4-13/16” x 8/0
P270413 11/16” x 4-13/16”
P17069668V 11/16” x 6-9/16” x 6/8
P370514 11/16” x 5-1/4”
P27041368 11/16” x 4-13/16” x 6/8
P17071468 11/16” x 7-1/4” x 6/8
P37051468 11/16” x 5-1/4” x 6/8
P27041380 11/16” x 4-13/16” x 8/0
P37051480 11/16” x 5-1/4” x 8/0
P270514 11/16” x 5-1/4”
P37069668 11/16” x 6-9/16” x 6/8
P27051468 11/16” x 5-1/4” x 6/8
P37069880 11/16” x 6-9/16” x 8/0
P27051480 11/16” x 5-1/4” x 8/0
P370714 11/16” x 7-1/4”
P27069668 11/16” x 6-9/16” x 6/8
P37071468 11/16” x 7-1/4” x 6/8
P27069680 11/16” x 6-9/16” x 8/0
P37071480 11/16” x 7-1/4” x 8/0
P270714 11/16” x 7-1/4”
Solid P170496 11/16” x 4-9/16”
P27071468 11/16” x 7-1/4” x 6/8
P17049668 11/16” x 4-9/16” x 6/8
P27071480 11/16” x 7-1/4” x 8/0
P170514 11/16” x 5-1/4” P17069668 11/16” x 6-9/16” x 6/8 P17069680 11/16” x 6-9/16” x 8/0 P170714 11/16” x 7-1/4”
Moulding images are approximate in scale.
31
Service - Quality - Integrity Raw / Primed / Solid - Pine
Jambs / Stop
One Round Edge Stop
Kerf Interior Jamb Primed Fingerjoint P37039668K 11/16” x 3-9/16” x 6/8 P37039680K 11/16” x 3-9/16” x 8/0
Primed Fingerjoint P350876 7/16” x 1-3/8”
Solid P150880 7/16” x 7/8”
P35087668 7/16” x 1-3/8” x 7’
P150878 7/16” x 1-1/8”
P350877 7/16” x 1-1/4”
P15087768 7/16 x 1-1/4” x 7’
P35087768 7/16” x 1-1/4” x 7’
P150877 7/16” x 1-1/4”
P35088768 - P.E.T. 3/8” x 1-1/4” x 7’
P15087668 7/16” x 1-3/8” x 7’
P35088780 - P.E.T. 3/8” x 1-1/4” x 8’ Raw Fingerjoint P250876 7/16” x 1-3/8”
P150876 7/16” x 1-3/8”
Colonial Stop Primed Fingerjoint P350936 7/16” x 1-3/8” P35093668 7/16” x 1-3/8” x 7’ Raw Fingerjoint P250936 7/16” x 1-3/8” P25093668 7/16” x 1-3/8” x 7’ Solid P150936 7/16” x 1-3/8”
P150875 7/16” x 1-5/8”
P25087668 7/16” x 1-3/8” x 7’ P250875 7/16” x 1-5/8” P250877 7/16” x 1-1/4” P25087768 7/16” x 1-1/4” x 7’
32
Moulding images are approximate in scale.
Service - Quality - Integrity Raw / Primed / Solid - Pine
Frames Kerf Exterior Frame Primed Fingerjoint Raw Fingerjoint P28141868 P38141868 1-1/4” x 4-1/8” x 6/8 1-1/4” x 4-1/8” x 6/8 P38141880 1-1/4” x 4-1/8” x 8/0
P28145868 1-1/4” x 4-5/8” x 6/8
P38145868 1-1/4” x 4-5/8” x 6/8
P28145880 1-1/4” x 4-5/8” x 8/0
P38145880 1-1/4” x 4-5/8” x 8/0
P281514 1-1/4” x 5-1/4”
P381514 1-1/4” x 5-1/4”
P28151468 1-1/4” x 5-1/4” x 6/8
P38151468 1-1/4” x 5-1/4” x 6/8
P28151480 1-1/4” x 5-1/4” x 8/0
P38151480 1-1/4” x 5-1/4” x 8/0
P28165868 1-1/4” x 6-5/8” x 6/8
P38165868 1-1/4” x 6-5/8” x 6/8
P28165880 1-1/4” x 6-5/8” x 8/0
P38165880 1-1/4” x 6-5/8” x 8/0
P28171468 1-1/4” x 7-1/4” x 6/8
P38171468 1-1/4” x 7-1/4” x 6/8
P28171480 1-1/4” x 7-1/4” x 8/0
P38171480 1-1/4” x 7-1/4” x 8/0 P38191480 1-1/4” x 9-1/4” x 8/0 Solid P18145868S 1-1/4” x 4-5/8” x 6/8
Veneer P18151468V 1-1/4” x 5-1/4” x 6/8
P18151468S 1-1/4” x 5-1/4” x 6/8
P18165868V 1-1/4” x 6-5/8” x 6/8
P18171468S 1-1/4” x 7-1/4” x 6/8
P18171468V 1-1/4” x 7-1/4” x 6/8
P18171480S 1-1/4” x 7-1/4” x 8/0
P18171480V 1-1/4” x 7-1/4” x 8/0
Moulding images are approximate in scale.
P18151480V 1-1/4” x 5-1/4” x 8/0
Double Rab, Non-Kerf Exterior Frame Primed Fingerjoint P38241868 1-1/4” x 4-1/8” x 6/8 P38241880 1-1/4” x 4-1/8” x 8/0 P38245868 1-1/4” x 4-5/8” x 6/8 P38245880 1-1/4” x 4-5/8” x 8/0 P38251468 1-1/4” x 5-1/4” x 6/8 P38251480 1-1/4” x 5-1/4” x 8/0 P38265868 1-1/4” x 6-5/8” x 6/8 P38265880 1-1/4” x 6-5/8” x 8/0 P38271468 1-1/4” x 7-1/4” x 6/8 P38271480 1-1/4” x 7-1/4” x 8/0 Raw Fingerjoint P28245868 1-1/4” x 4-5/8” x 6/8 P28251468 1-1/4” x 5-1/4” x 6/8 P28265868 1-1/4” x 6-5/8” x 6/8 P28271468 1-1/4” x 7-1/4” x 6/8
33
Service - Quality - Integrity Raw / Primed / Solid - Pine
Frames Single Rab Frame Primed Fingerjoint P38441868 1-1/4” x 4-1/8” x 6/8
Raw Fingerjoint P28341868 1-1/4” x 4-1/8” x 6/8
P384458 1-1/4” x 4-5/8”
P28345868 1-1/4” x 4-5/8” x 6/8
P38445868 1-1/4” x 4-5/8” x 6/8
P28441868 1-1/4” x 4-1/8” x 6/8
P38445880 1-1/4” x 4-5/8” x 8/0
P284458 1-1/4” x 4-5/8”
P38451468 1-1/4” x 5-1/4” x 6/8
P28445868 1-1/4” x 4-5/8” x 6/8
P38451480 1-1/4” x 5-1/4” x 8/0
P284514 1-1/4” x 5-1/4”
P38465868 1-1/4” x 6-5/8” x 6/8
P28451468 1-1/4” x 5-1/4” x 6/8
P38465880 1-1/4” x 6-5/8” x 8/0
P28465868 1-1/4” x 6-5/8” x 6/8
P38471468 1-1/4” x 7-1/4” x 6/8
P284714 1-1/4” x 7-1/4”
P38471480 1-1/4” x 7-1/4” x 8/0 Solid P184714 1-1/4” x 7-1/4”
P28471468 1-1/4” x 7-1/4” x 6/8 Veneer P18445868 1-1/4” x 4-5/8” x 6/8 P18451468 1-1/4” x 5-1/4” x 6/8 P18465868 1-1/4” x 6-5/8” x 6/8 P18471468 1-1/4” x 7-1/4” x 6/8
34
Moulding images are approximate in scale.
Service - Quality - Integrity Raw / Primed / Solid - Pine
Frames 20-Min. Fire Rated Frame Set Primed Fingerjoint P387139FRS 1-1/4” x 4-5/8” x 6/8 x 3/0 P387129FRS 1-1/4” x 5-1/4” x 6/8 x 3/0 P3871298FS 1-1/4” x 5-1/4” x 8/0 x 3/0 P387193FRS 1-1/4” x 7-1/4” x 6/8 x 3/0 P3871938FS 1-1/4” x 7-1/4” x 8/0 x 3/0
Moulding images are approximate in scale.
35
Service - Quality - Integrity Hardwoods
Base
Reversible Solid Oak O113214 3/8” x 2-1/4” O113314 3/8” x 3-1/4”
#49
#31 Cherry C110B31RL 9/16” x 4-1/4” Maple M810B31RL 9/16” x 4-1/4”
Cherry C110B49RL 9/16” x 4-1/4” Maple M810B49RL 9/16” x 4-1/4”
Santa Fe Solid Oak O1101410 9/16” x 3-3/8” O1101430 9/16” x 5-3/8”
Base Shoe Solid Oak O110126 1/2” x 3/4”
36
Moulding images are approximate in scale.
Service - Quality - Integrity Hardwoods
Base
#90 Cherry C110090RL 9/16” x 4-1/2” Maple M810090RL 9/16” x 4-1/2”
Colonial Solid Oak O110623 9/16” x 3-1/8” O113314 9/16” x 5-1/4”
#85 Cherry C110085RL 3/4” x 4-1/4” Maple M810085RL 3/4” x 4-1/4”
Moulding images are approximate in scale.
#620 Cherry C110620RL 9/16” x 4-1/4” Maple M810620RL 9/16” x 4-1/4”
37
Service - Quality - Integrity Hardwoods
Casing
#16 Cherry C120016RL 3/4” x 3-1/2” Maple M820016RL 3/4” x 3-1/2”
#62 Cherry C120062RL 3/4” x 2-3/4” Maple M820062RL 3/4” x 2-3/4”
38
#39
#65
Cherry C120039RL 11/16” x 3-1/4” Maple M820039RL 11/16” x 3-1/4”
Cherry C120065RL 13/16” x 3-1/4” Maple M820065RL 13/16” x 3-1/4”
#57 Cherry C120057RL 7/8” x 3-1/2” Maple M820057RL 7/8” x 3-1/2”
Moulding images are approximate in scale.
Service - Quality - Integrity Hardwoods
Casing
#60 Cherry C120060RL 3/4” x 3” Maple M820060RL 3/4” x 3”
49er Solid Oak O124900 1” x 3-1/4”
Bevel Solid Oak O12015868 5/8” x 1-5/8” x 7’
Colonial
O120158 5/8” x 1-5/8”
Solid Oak O12035668 5/8” x 2-1/4” x 7’
O12032468 5/8” x 2-1/4” x 7’
O120356 5/8” x 2-1/4”
O120324 5/8” x 2-1/4”
O120444 5/8” x 3-1/4”
Moulding images are approximate in scale.
39
Service - Quality - Integrity Hardwoods
Crown/Miscellaneous
Cove
Quarter Round
Flat Screen
Oak O140093 3/4” x 3/4”
Oak O140105 3/4” x 3/4” Meranti M1404008 1/4” x 1/4”
Solid Oak O140142 1/4” x 3/4”
Crown Oak O130068 1/2” x 1-5/8” O130054 1/2” x 2-1/4” O130051 5/8” x 3-1/4”
Outside Corner Oak O140206 3/4” x 3/4” O140205 1” x 1”
Full Round Oak O140233 1-3/8”
Mullion/Chair Rail Solid Oak O130045 9/16” x 2-1/2”
#1518 Backband Cap Oak O140292 9/16” x 1-1/8”
40
Cherry C1201518RL 1-1/2” x 1-1/8” Maple M8201518 1-1/2” x 1-1/8”
Hand Rail
Chair Rail
Solid Oak O190240A 1-3/8” x 2-1/2”
Solid Oak O130390 5/8” x 2-5/8”
Moulding images are approximate in scale.
Service - Quality - Integrity Hardwoods
Miscellaneous
One Round Edge Stop Cherry C15088770 7/16” x 1-1/4” x 84” C15088780 7/16” x 1-1/4” x 99” Maple M85088770 7/16” x 1-1/4” x 84” M85088780 7/16” x 1-1/4” x 99” Solid Oak O15088768 3/8” x 1-1/4” x 7’ O150887 3/8” x 1-1/4”
Theshold Solid Oak O1735834 3/4” x 3-5/8”
Flat Sill Solid Oak O170163 1-1/16” x 5-1/4” O170162 1-1/16” x 7-1/4” Image is not to scale
O1745834 3/4” x 4-5/8” O17534114 1-1/16” x 5-5/8”
OG Stool Solid Oak O1710215 11/16” x 5-1/2” O1710217 11/16” x 7-1/4”
Moulding images are approximate in scale.
41
Service - Quality - Integrity Hardwoods
Miscellaneous
Brickmould
T-Astragal
Cherry C120180RL 1-1/4” x 2” Meranti Veneer MV2018086 1-1/4” x 2” x 8’6”
Cherry C19013807 1-3/8” x 2” x 7’ C19013808 1-3/8” x 2” x 8’ Maple M89013807 1-1/4” x 2” x 7’
Kerf T-Astragal Solid Oak O171300K80 1-3/8” x 3” x 8’ Cherry C190130808 1-1/2” x 2-7/8” x 8’ Meranti Veneer MV9013408 1-1/2” x 2-7/8” x 8’
M89013808 1-1/4” x 2” x 8’ Solid Oak O17130570 1-3/8” x 2-1/8” x 7’ O17130580 1-3/8” x 2-1/8” x 8’ O17130080 1-3/8” x 2-1/4” x 8’
Mull Post Cherry Veneer CV18914388 1” x 4-3/8” x 8’ Meranti Veneer MV18914388 1” x 4-3/8” x 8’
42
Colonial Stop Solid Oak O15093468 1/2” x 1-3/4” x 7’ O150934 1/2” x 1-3/4”
Moulding images are approximate in scale.
Service - Quality - Integrity Hardwoods
Jambs/Frames Interior Jamb
Exterior Frame
Cherry C17049668 11/16” x 4-9/16” x 6/8
Cherry C18449668 1-1/4” x 4-9/16” x 84”
C17049680 11/16” x 4-9/16” x 8/0
C18449680 1-1/4” x 4-9/16” x 96”
C17069668 11/16” x 6-9/16” x 6/8
C18469668 1-1/4” x 6-9/16” x 84”
C17069680 11/16” x 6-9/16” x 8/0
C18469680 1-1/4” x 6-9/16” x 96” Oak O18151468 1-1/4” x 5-1/4” x 6/8
C17071468 11/16” x 7-1/4” x 6/8 C17071480 11/16” x 7-1/4” x 8/0 Maple M87049668 11/16” x 4-9/16” x 6/8
O18171468 1-1/4” x 7-1/4” x 6/8
M87049680 11/16” x 4-9/16” x 8/0 M87069668 11/16” x 6-9/16” x 6/8 M87069680 11/16” x 6-9/16” x 8/0 M87071468 11/16” x 7-1/4” x 6/8 M87071480 11/16” x 7-1/4” x 8/0 Oak O17049668 11/16” x 4-9/16” x 6/8 O17051468 11/16” x 5-1/4” x 6/8
Moulding images are approximate in scale.
43
Service - Quality - Integrity Hardwoods
Frame /S4S Single Rab Frame
S4S
Oak O18445868 1-1/4” x 4-5/8” x 6/8
Oak O BD102_ _ 1” x 2” - 6’, 8’, 10’, 12’
O184514 1-1/4” x 5-1/4”
O BD103_ _ 1” x 3” - 6’, 8’
O18451468 1-1/4” x 5-1/4” x 6/8
O BD104 _ _ 1 x 4 - 6’, 8’, 10’, 12’
O184714 1-1/4” x 7-1/4”
O BD106 _ _ 1 x 6 - 8’, 10’, 12’
O18471468 1-1/4” x 7-1/4” 6/8
O BD108 _ _ 1 x 8 - 6’, 8’, 10’, 12’ O BD112 _ _ 1 x 12 - 6’, 8’, 10’, 12’ Poplar HLPO102 _ _ 1 x 2 - 6’, 8’, 10’ HLPO10308 1 x 3 - 8’ HLPO104 _ _ 1 x 4 - 6’, 8’, 10’, 12’ HLPO106 _ _ 1 x 6 - 6’, 8’, 10’, 12’ HLPO108 _ _ 1 x 8 - 6’, 8’, 10’, 12’ HLPO112 _ _ 1 x 12 - 6’, 8’, 10’
44
Moulding images are approximate in scale.
Service - Quality - Integrity Knotty Alder
Base
#85
#31 #90
Knotty Alder A110085KRL 3/4” x 4-1/4”
Knotty Alder A110090KRL 9/16” x 4-1/2”
One Round Edge
Colonial
Knotty Alder A111434KRL 5/8” x 3-1/4” A111435KRL 5/8” x 4-1/4” Knotty Alder - FJ A210603KRL 5/8” x 5”
Moulding images are approximate in scale.
Knotty Alder A110B31KRL 9/16” x 4-1/4”
Knotty Alder A110623KRL 9/16” x 3-1/4”
#49 Knotty Alder A110B49KRL 9/16” x 4-1/4”
A110620KRL 9/16” x 4-1/4” A110618KRL 9/16” x 5-1/4”
45
Service - Quality - Integrity Knotty Alder
Casing
Two Round Edge
Colonial
Knotty Alder A121433KRL 3/4” x 3-1/4”
Knotty Alder A120356K 5/8” x 2-1/4”
A121473KRL 3/4” x 2-1/4”
#16
#39
#57
Knotty Alder A120016KRL 3/4” x 3-1/2”
Knotty Alder A120039KRL 11/16” x 3-1/4”
Knotty Alder A120057KRL 7/8” x 3-1/2”
46
Moulding images are approximate in scale.
Service - Quality - Integrity Knotty Alder
Casing
#60
#65
Knotty Alder A120060KRL 3/4” x 3”
Knotty Alder A120065KRL 13/16” x 3-1/4”
#62 Knotty Alder A120062KRL 3/4” x 2-3/4”
Moulding images are approximate in scale.
47
Service - Quality - Integrity Knotty Alder
Crown
Crown Knotty Alder A130068KRL 9/16” x 1-5/8” A130051KRL 9/16” x 3-1/4” A130045KRL 9/16” x 5-1/4”
Double Beaded Crown Knotty Alder A130011KRL 13/16” x 4-5/8” A130012KRL 1-1/8” x 6-1/2”
48
Moulding images are approximate in scale.
Service - Quality - Integrity Knotty Alder
Miscellaneous
Back Band Knotty Alder A121518K08 1-1/2” x 1-1/8” x 8’
Brickmould Superior Knotty Alder A120180S 1-1/4” x 2”
Kerf T-Astragal Superior Knotty Alder A190130809 1-1/2” x 2-7/8” x 108”
Quarter Round Superior Knotty Alder A140110S 1/4” x 1/4” A140109S 3/8” x 3/8”
T-Astragal Mull Post Knotty Alder A1891438K9 1” x 4-3/8”
Moulding images are approximate in scale.
Superior Knotty Alder A19013809 1-1/4” x 2” x 9’ A19013409 1-1/4” x 2-1/4” x 9’
49
Service - Quality - Integrity Knotty Alder
Miscellaneous /Jambs Interior Jamb Knotty Alder A18054087K 11/16” x 4-9/16” x 6’8” A18054099K 11/16” x 4-9/16” x 8’6” A18054587K 11/16” x 5-1/4” x 6’8” A1805499K 11/16” x 5-1/4” x 8’6” A18055487K* 11/16” x 7-1/4” x 6’8”
E2E
A18055499K* 11/16” x 7-1/4” x 8’6”
Knotty Alder A163104K 3/4” x 3-1/2”
A18055687K* 11/16” x 9-1/16” x 6’8”
A163106K 3/4” x 5-1/2” A163108K 3/4” x 7-1/4”
A18055699K* 11/16” x 9-1/16” x 8’6” Superior Knotty Alder A18054099S* 11/16” x 4-9/16” x 99” A18054599S* 11/16” x 5-1/4” x 99” A18055499S* 11/16” x 7-1/4” x 99”
S4S Knotty Alder A160112K 3/4” x 11-1/4” A160546K 1-1/16” x 5-1/2” A160206K 1-1/2” x 5-1/2” Knotty Alder - FJ A260112KRL 3/4” x 11-1/4” * Subject to edge glue
50
Two Round Edge Stop
One Round Edge Stop
Superior Knotty Alder A150866K99 1/2” x 1-3/8” x 99”
Superior Knotty Alder A150866S99 1/2” x 1-3/8” x 99”
Moulding images are approximate in scale.
Service - Quality - Integrity Knotty Alder
Frames Kerf Exterior Frame Knotty Alder A18057087K 1-1/4” x 4-5/8” x 6’8” A18057099K 1-1/4” x 4-5/8” x 8’6” A18057587K 1-1/4” x 5-1/4” x 6’8” A18057599K 1-1/4” x 5-1/4” x 8’6” A18057887K 1-1/4” x 6-5/8” x 6’8”
20-Min. Fire Rated Frame Knotty Alder A18057087F 1-1/4” x 4-5/8” x 6’8” A18057099F 1-1/4” x 4-5/8” x 8’6” A18058287F 1-1/4” x 7-1/4” x 6’8” A18058299F 1-1/4” x 7-1/4” x 8’6” Image is not to scale
A18057899K 1-1/4” x 6-5/8” x 8’6” A18058287K* 1-1/4” x 7-1/4” x 6’8” A18058299K* 1-1/4” x 7-1/4” x 8’6” A18058487K* 1-1/4” x 9-1/16” x 6’8” A18058499K* 1-1/4” x 9-1/16” x 8’6” Image is not to scale
Moulding images are approximate in scale.
51
Service - Quality - Integrity Douglas Fir/Redwood
Base/Casing
Colonial Casing Douglas Fir F12035668 11/16” x 2-1/4” x 7’ F120356 11/16” x 2-1/4” F120444 5/8” x 3-1/4”
Colonial Base Douglas Fir F110623 9/16” x 3-1/4” F110618 9/16” x 5-1/4”
52
Moulding images are approximate in scale.
Service - Quality - Integrity Douglas Fir/Redwood
Miscellaneous
Quarter Round Redwood R140105 3/4” x 3/4”
Outside Corner Redwood R140204 1-1/2” x 1-1/2”
Watertable with Lip Redwood R190128 1-3/8” x 1-9/16”
Shingle Mould Redwood R190158SH 11/16” x 1-5/8”
Aye Stucco Mould E2E Knotty Alder A160104K 3/4” x 3-1/2” A160106K 3/4” x 5-1/2”
Moulding images are approximate in scale.
Redwood R190112S70 13/16” x 1-1/2” x 7’ R190112S 13/16” x 1-1/2” Redwood FJ R290258 1” x 2-5/8”
53
Service - Quality - Integrity Douglas Fir/Redwood
Miscellaneous
T-Astragal Kerf T-Astragal Douglas Fir F191300K7 1-1/2” x 2-7/8” x 7’ F191300K8 1-1/2” x 2-7/8” x 8’
Douglas Fir F19130507 1-1/4” x 2” x 7’ F19130508 1-1/4” x 2” x 8’ F19130007 1-1/4” x 2-1/4” x 7’ F19130008 1-1/4” x 2-1/4” x 8’
Mushroom Handrail Douglas Fir F190501 1-7/16” x 1-15/16”
54
Full Round
F190240 1-1/2” x 2-5/16”
Douglas Fir F140233A 1-5/16”
F1902405 - Fingerjoint 1-1/2” x 2-5/16”
F140232 1-5/8”
Moulding images are approximate in scale.
Service - Quality - Integrity Douglas Fir/Redwood
Jambs / Stop / Frame Exterior Frame Douglas Fir F18151468V 11/16” x 5-1/4” x 6/8 F18151480V 11/16” x 5-1/4” x 8/0 F18171468V 11/16” x 7-1/4” x 6/8 F18171480V 11/16” x 7-1/4” x 8/0
One Round Edge Stop Douglas Fir F150877 7/16” x 1-1/4” F15087768 7/16” x 1-1/4” x 7/0
Interior Jamb Douglas Fir Veneer F17049668V 11/16” x 4-9/16” x 6/8 F17051480V 11/16” x 5-1/4” x 8/0
Moulding images are approximate in scale.
55
Service - Quality - Integrity Paint Grade
Accessories
Bulls Eye Corner Block Paint Grade CBP1212BE 7/8” x 2-1/2” x 2-1/2” CBP1312BE 7/8” x 3-1/2” x 3-1/2” CBP1412BE 7/8” x 4-1/2” x 4-1/2” Paint Grade - OG CBP1212BOG 7/8” x 2-1/2” x 2-1/2” CBP1312BOG 7/8” x 3-1/2” x 3-1/2” Oak CBO1350B 7/8” x 3-1/2” x 3-1/2”
Flower Corner Block Paint Grade CBP1312FL 7/8” x 3-1/2” x 3-1/2” CBP1412FL 7/8” x 4-1/2” x 4-1/2”
56
Moulding images are approximate in scale.
Service - Quality - Integrity Paint Grade
Accessories Plinth Block Paint Grade CBP1612PB 1-1/8” x 3-1/2” x 6-1/2” CBP1812PB 1-1/8” x 4-1/2” x 8-1/2” Oak CBO1612PB 1-1/8” x 3-1/2” x 6-1/2”
Moulding images are approximate in scale.
57
Service - Quality - Integrity Particle Board Shelving
Bull Nose Edge Filled PBB121204 3/4” x 12” x 48” PBB121206 3/4” x 12” x 72” PBB121208 3/4” x 12” x 96” PBB121212 3/4” x 12” x 144” PBB121216 3/4” x 12” x 192” All sizes are net 11-1/4” wide PBB121604 3/4” x 16” x 48” PBB121606 3/4” x 16” x 72” PBB121608 3/4” x 16” x 96” PBB121612 3/4” x 16” x 144” PBB121616 3/4” x 16” x 192” All sizes are net 16” wide PBB122408 3/4” x 24” x 96” PBB122412 3/4’ x 24” x 144” All sizes are net 24” wide
Square Edge - Edge Filled PBS121212 3/4” x 12” x 144” PBS121216 3/4” x 12” x 192” All sizes are net 11-1/4” wide PBS121612 3/4” x 16” x 144” PBS121616 3/4” x 16” x 192” All sizes are net 16” wide PBS122412 3/4” x 24” x 144” All sizes are net 24” wide
Square Edge - Prefinished White PBSW121208 3/4” x 12” x 96” PBSW121212 3/4” x 12” x 144” All sizes are net 11-1/4” wide PBSW121608 3/4” x 16” x 96” PBSW121612 3/4” x 16” x 144” All sizes are net 15-1/4” wide PBSW122408 3/4” x 24” x 96” PBSW122412 3/4” x 24” x 144” All sizes are net 23-1/4” wide
* Crayon marked.
58
Moulding images are approximate in scale.
Service - Quality - Integrity Pine Clears/Commons & Furring Strips
Clear C & Better (Odd & Even Lengths) P BCB104 P BCB106 P BCB108 P BCB110 P BCB112
1” x 4” - 8’ / 16’ 1” x 6” - 8’ / 16’ 1” x 8” - 8’ / 16’ 1” x 10” - 8’ / 16’ 1” x 12” - 8’ / 16’
KD HT #2/Better Common (Even Lengths Only) PBD2C10406/08 PBD2C10410/12 PBD2C10414/16 PBD2C10606/08 PBD2C10610/12 PBD2C10614/16 PBD2C10806/08 PBD2C10810/12 PBD2C10814/16 P BD2C110S P BD2C110M P BD2C110L P BD2C112S P BD2C112M P BD2C112L P BD2C212*
1” x 4” - 6’ / 8’ 1” x 4” - 10’ / 12’ 1” x 4” - 14’ / 16’ 1” x 6” - 6’ / 8’ 1” x 6” - 10’ / 12’ 1” x 6” - 14’ / 16’ 1” x 8” - 6’ / 8’ 1” x 8” - 10’ / 12’ 1” x 8” - 14’ / 16’ 1” x 10” - 6’ / 8’ 1” x 10” - 10’ / 12’ 1” x 10” - 14’ / 16’ 1” x 12” - 6’ / 8’ 1” x 12” - 10’ / 12’ 1” x 12” - 14’ / 16’ 2” x 12” - 16’
KD HT #3 Common (Even Lengths Only) P BD3C112S P BD3C112M P BD3C112L
1” x 12” - 6’ / 8’ 1” x 12” - 10’ / 12’ 1” x 12” - 14’ / 16’
Premium SPF Furring Strips H FS10208P H FS20208P
1” x 2” x 8’ 2” x 2” x 8’
Moulding images are approximate in scale.
59
Service - Quality - Integrity Pacific Pine Patterns
1” x 6” - 12 / 20 T & G Reversible Pacific Pine P TG210612 P TG210614 P TG210616 P TG210618 P TG210620
1” x 6” - 12’ 1” x 6” - 14’ 1” x 6” - 16’ 1” x 6” - 18’ 1” x 6” - 20’
1” x 6” - 12 / 20 Shiplap Reversible Pacific Pine P SL210612 P SL210614 P SL210616 P SL210618 P SL210620
1” x 6” - 12’ 1” x 6” - 14’ 1” x 6” - 16’ 1” x 6” - 18’ 1” x 6” - 20’
1” x 8” - 10 / 20 Shiplap Reversible Pacific Pine P SL210810 P SL210812 P SL210814 P SL210816 P SL210818 P SL210820
1” x 8” - 10’ 1” x 8” - 12’ 1” x 8” - 14’ 1” x 8” - 16’ 1” x 8” - 18’ 1” x 8” - 20’
2” x 6” - 10 / 20 T & G Reversible SPF Pacific Select P TGS20610 P TGS20612 P TGS20614 P TGS20616 P TGS20618 P TGS20620
2” x 6” - 10’ 2” x 6” - 12’ 2” x 6” - 14’ 2” x 6” - 16’ 2” x 6” - 18’ 2” x 6” - 20’
2” x 8” - 12 / 20 T & G Reversible SPF Pacific Select P TGS20812 P TGS20814 P TGS20816
60
2” x 8” - 12’ 2” x 8” - 14’ 2” x 8” - 16’
Moulding images are approximate in scale.
Service - Quality - Integrity C & Btr Clear Douglas Fir
Vertical Grain (Odd & Even Lengths) FVGC102 FVGC103 FVGC104 FVGC106 FVGC108 FVGC110 FVGC112 FVGC204 FVGC206 FBGC208 FVGC212 FVGTG104 FVGBN5412
1” x 2” - 6’ / 16’ 1” x 3” - 6’ / 16’ 1” x 4” - 6’ / 16’ 1” x 6” - 6’ / 16’ 1” x 8” - 6’ / 16’ 1” x 10” - 6’ / 16’ 1” x 12” - 6’ / 16’ 2” x 4” - 6’ / 16’ 2” x 6” - 6’ / 16’ 2” x 8” - 6’ / 16’ 2” x 12” - 6’ / 16’ 1” x 4” - 6’ / 16’ 5/4” x 12” x 6’ / 16’
T & G Flooring BN Step
Mixed Grain (Odd & Even Lengths) FMGC202 FMGC404
2” x 2” - 6’ / 16’ 4” x 4” - 6’ / 20’
Moulding images are approximate in scale.
C/Btr
61
Service - Quality - Integrity
62
Service - Quality - Integrity
6363
Service - Quality - Integrity
64
Moulding images are approximate in scale.
Service - Quality - Integrity
General Information: Minimum length for stainable flexible moulding is 6', maximum length is 12' and is available by special order only. Minimum length for paintable flexible moulding is 6' maximum length is 12' for stock items. Longer lengths maybe available upon request for special orders. All flexible moulding is sold to the nearest whole foot only. Cutting: Mouldings can be cut, shaped and sanded by using standard woodworking tools. Hold moulding firmly to table when cutting. Cut material long and then trim or shave to exact length. When shaping, make sure to use a few shallow passes instead of a single deep cut. Don't sand or shape wood grain on stainable flexible moulding. Fastening: Determine material layout and placement for installation. Use industrial adhesive for bonding. Keep nails or screws to a minimum. Keep nails and screws away from ends or edges to avoid bumps. The best way to fasten moulding is lay a block of wood over the face, nail through block and then remove nail and block once the adhesive has cured. Painting: Clean material prior to painting. Fill and sand like wood, using filler which will adhere to an oil-based man-made product. For best results a primer is recommended. Painting can be done with Latex, Enamel, Waterbase or Oil paints. When using Alkyd enamels or Oil based enamels waterbased or latex undercoat is required, if undercoat is not used, paint may not dry properly. Do not paint before installation. Staining: Clean material prior to staining. Wood grain appearance can be affected if the surface is altered; we do not recommend sanding. Gell stains work best that are designed for synthetic surfaces. Use manufacturer's instruction when applying stain. Never stain before installation. When filling nail holes, it's best to stain material first. Then use a filler that matches the cured stain. Apply clear coat after staining. Ordering Instructions: How to order-True Radius Half Circle: 1. Determine diameter dimension (distance across inside width of circle). 2. Determine radius dimension (half of diameter dimension). 3. Multiply diameter dimension times 2 to calculate length. 4. Round length up or down to nearest even ft. Example: Diameter 2/4 x 2 = (28") x 2 = 56" round up to 5ft. 5. Multiply even footage length times our moulding profile price per lf to calculate price. How to order-True Radius Quarter Circle: 1. Determine inside width and radius of 1/4 circle portion.. 2. Verify radius is same as width or height. 3. Multiply radius dimension times 2 to calculate length. 4. Round length up or down to nearest even footage. Example: radius 18" x 2 = 36" rounded up to 4 ft. (min. length) 5. Multiply even footage length times our moulding profile price per lf to calculate price.
Flex diameter width.
Width Radius
How to order-True Radius Full Circle: 1. Determine diameter dimension (distance across inside width of circle). 2. Determine radius dimension (half of diameter dimension). 3. Multiply diameter dimension times 4 to calculate length. 4. Round length up or down to nearest even ft. Example: 26" x 4 = 104" rounded up to 9ft. 5. Multiply even footage length times our moulding profile price per lf to calculate price. How to order-Arc Eyebrow Segment Circle: 1. Determine arc radius using inside rise and width dimension of arc segment circle. 2. Divide width dimension by 2 an multiply it times itself (squared). 3. Multiply height dimension times itself (squared). Rise 4. Add new width sum and new height sum together. 5. Divide sum total by height dimension first multiplied times 2 to calculate radius dimension. 6. Determine material length by multiplying rise times 3 and adding sum to width. 7. Round length up or down to nearest even footage. Example radius 7"R x 3 = 21" + 60"W = 81" rounded up to 7ft. 8. Multiply even footage length times our moulding profile price per lf to calculate price.
Flex diameter width.
Width
In General: True Radius Casing Flexibility Range: 1.Diameters 1' 6" to 3' will expand 4" and contract 2" if the profile is not larger than 3/4" x 3-1/2" (larger size profiles will restrict flexibility for diameters within this range.) 2.Diameters 4' and larger will expand 10" and contract 6" if the profiles is not larger than 3/4" x 3-1/2" (larger profiles will restrict flexibility for diameters within in this range). Pre-forming Limitations: 1.Minimum D 4' (24" Radius) if the profiles is 6" to 8" wide. 2.Minimum D 3' (18" Radius) if the profile is 5" to 6" wide. 3.Minimum D 2' 4" (14" Radius) if the profile is 3' 2" to 5" wide. 4.Minimum D 1' 6" (9" Radius) if the profile is 2" to 3' 2" wide. Note: The thicker edge of moulding profile will be made facing out unless otherwise specified.
65
OrePac Building Products • 8185 Signal Court • Sacramento, CA 95824 Phone: 916-381-8051 • Fax: 916-381-4059 • www.orepac.com