Mento Hoses and Couplings Catalogue
8. Hose Clamps/Fittings/Safety Equipment
Hose Clamps / Fittings / Safety Equipment • • • • • • • • •
Dixon Hose Clamps Power (PARI) Hose Clamps ABA Hose Clamps King Combination Nipples SPIRALINA Safety Stockings "Chinese Finger" Wipcheck Carabine Hook Wire Rope
8. 8-1 8-2 8-3 8-4
5. EDITION
Mento Hoses and Couplings Catalogue
8-1. Hose Clamps/Fittings/Safety Equipment
Dixon Hose Clamps
Power (PARI) Hose Clamps
Material: Steel A rugged, plated Steel two-bolt clamp with machine bolts and hex nuts. Inner surface has dual gripping ridges. Bolt luggs are reinforced to prevent bending out of alignment. * Recommended Torque rated in Ft.lbs Note: Measure Hose O.D. accurately before ordering clamps
Part Number 400 431 463 525 550 600 639 675 769 818 875 988 1125 1275 1360 1450 1700
For Hose 0.D. From To 88 96 96 103 102 108 108 125 114 128 130 144 144 151 151 165 165 192 195 208 210 225 227 239 252 289 300 330 310 355 335 381 382 444
Torque 40 40 40 60 60 60 60 60 60 125 125 125 125 125 200 200 200
Material: Steel
Part Number TSC-25 TSC-31 TSC-34 TSC-37 TSC-1305 TSC-1306 TSC-1307 TSC-1308 TSC-1309
30 – 65 mm diameter 20 mm band width 1 mm band thickness Unbraco 2 pieces M-8x60 60 – 380 diameter 25 mm band width 1 mm band thickness Unbraco 2 pieces M-8x60
Hose O.D. Range Inches mm 5/8” - 15/16” 17 - 22 1 5/16” - 1 1/8” 22 - 29 1 1/16” - 1 1/4” 27 - 32 1 1/4” - 1 7/16” 32 - 37 1 1/2” - 1 15/16” 39 - 49 1 29/32” - 2 3/8” 48 - 60 2 3/8” - 3 1/64” 60 - 76 3 1/32” - 3 11/16” 77 - 94 3 11/16” - 4 1/2” 94 - 115
Dia. mm 30– 40 40– 50 45– 55 50– 60 55– 65 60– 70 65– 75 70– 80 75– 85 80– 90 85– 95 90–100 95–105 100–110 105–115 110–120 115–125 120–130 125–135 130–140 135–145 140–150 145–155 150–160 155–165 160–170 165–175 170–180 180–190 190–200 200–210 210–220 220–230 230–240 240–250 245–255 250–260 260–270 265–275 270–280 280–290 290–300 305–315 310–320 340–350 360–370 370–380
Galvanized Part No. 2333040 2333050 2333055 2333060 2333065 2333070 2333075 2333080 2333085 2333090 2333095 2333100 2333105 2333110 2333115 2333120 2333125 2333130 2333135 2333140 2333145 2333150 2333155 2333160 2333165 2333170 2333175 2333180 2333190 2333200 2333210 2333220 2333230 2333240 2333250 2333255 2333260 2333270 2333275 2333280 2333290 2333300 2333315 2333320 2333350 2333370 2333380
AISI 316 Part No. 2334040 2334050 2334055 2334060 2334065 2334070 2334075 2334080 2334085 2334090 2334095 2334100 2334105 2334110 2334115 2334120 2334125 2334130 2334135 2334140 2334145 2334150 2334155 2334160 2334165 2334170 2334175 2334180 2334190 2334200 2334210 2334220 2334230 2334240 2334250 2334255 2334260 2334270 2334280 2334280 2334290 2334300 2334315 2334320 2334350 2334370 2334380
1
Mento Hoses and Couplings Catalogue
8-2. Hose Clamps/Fittings/Safety Equipment
ABA Hose Clamps The Clamps with the blue housing. Screw and band (from carbon steel) brigth galvanized and chromated. Dia. mm 8 – 14 11 – 17 13 – 20 15 – 24 19 – 28 22 – 32 26 – 38 32 – 44 38 – 50 44 – 56 50 – 65 58 – 75 68 – 85 77– 95 87–112 104–138 130–165 150–180 175–205 200–231 226–256 251–282 277–307
Bag 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50
Part No. 2301014 2301017 2301020 2301024 2301028 2301032 2301038 2301044 2301050 2301056 2301065 2301075 2301085 2301095 2301112 2301138 2301165 2301180 2301205 2301231 2301256 2301282 2301307
Steel Hose Menders
SS316 Part No. 2306014 2306017 2306020 2306024 2306028 2306032 2306038 2306044 2306050 2306056 2306065 2306075 2306085 2306095 2306112 2306138 2306165 2306180 2306205 2306231 2306256 2306282 2306307
Size
Part No. Steel
1/4” 3/8” 1/2” 5/8” 3/4” 1” 1 1/4” 1 3/8” 1 1/2” 2” 2 1/2” 3” 4” 5” 6” 8” 10” 12”
DM-A DM-B DM-1 DM-5 DM-6 DM-11 DM-16 DM-18 DM-21 DM-26 DM-31 DM-36 DM-46 DM-51 DM-66 DM-86 DM-100 DM-120
Part No. 316 Stainless Steel RDM-A RDM-B RDM-1 RDM-6 RDM-11 RDM-16 RDM-21 RDM-26 RDM-36 RDM-46
King Combination Nipples Sizes 1/2” to 12” Materials Steel Plated, Steel Unplated, Stainless Steel, Brass, Aluminium, Nylon and Polypropylene Details Hose nipples, made from tubular stock to fit straight end hose. Threaded end, in all styles, has male NPT/BSP Thread same size as hose; i.e. 2” nipple has 2” thread and fits 2” I.D. Hose.
Size 1/2” 3/4” 1” 1 1/4” 1 1/2” 2” 2 1/2” 3” 4” 5” 6” 8” 10” 12”
BSP Thread NPT Thread Grooved Ends* Bevelled Ends 316 316 316 316 Plated Steel Stainless Steel Plated Steel Stainless Steel Unplated Steel Stainless Steel Unplated Steel Stainless Steel Part No. Part No. Part No. Part No. Part No. Part No. Part No. Part No. STC-1A STC-1 RST-1 STB-1 STC-5A STC-5 RST-5 STB-5 STC-10A RST-10A STC-10 RST-10 STV-10 STB-10 RSTB-10 STC-15A RST-15A STC-15 RST-15 STV-15 STB-15 RSTB-15 STC-20A RST-20A STC-20 RST-20 STV-20 STB-20 RSTB-20 STC-25A RST-25A STC-25 RST-25 STV-25 STB-25 RSTB-25 STC-30A RST-30A STC-30 RST-30 STV-30 STB-30 RSTB-30 STC-35A RST-35A STC-35 RST-35 STV-35 STB-35 RSTB-35 STC-40A RST-40A STC-40 RST-40 STV-40 STB-40 RSTB-40 STC-50A STC-50 RST-50 STV-50 STB-50 STC-60A STC-60 RST-60 STV-60 STB-60 STC-80 RST-80 STV-80 STB-80 STC-100 STV-100 STB-100 STC 120 STV-120 STB-120
2
Mento Hoses and Couplings Catalogue
8-3. Hose Clamps/Fittings/Safety Equipment
SPIRALINA
Ø NOMINAL
Ø I.D.
Ø O.D.
WALL THICKNESS
WEIGHT
SPIRAL PITCH
TENSILE FORCE NEEDED TO ELONGATE OF 100 %
FOR SINGLE HOSES Ø MIN-MAX
FOR HOSES IN BUNDLES O.D. MIN-MAX
Rigid PVC spiral SH. D. (3 SEC.) = 78 ± 3, for protection from crushing and abrasion (in compliance with ISO 4649<150 mm3) of hydraulic hoses and wrapping groups of hoses.
Part No.
mm
mm
mm
mm
g/m
mm
kg
inch
mm
936013
13X16
13
16,2
1,6
80
11
>3
3/16 - 1/4
12-18
936016
16X20
16
19,5 1,75
100
13
>3
1/4 - 1/2
16-26
936020
20X25
20
24,2
2,1
170
14,5
>3
1/2 - 3/4
20-27
936024
24X29
23,5 28,5
2,5
240
15
>4
1/2 - 3/4
23-30
936025
25X30
26
30
2
250
15
>4
1/2 - 1
25-33
936027
27X32
27
32,2
2,6
295
16
>4
5/8 - 1
27-35
936030
30X35
30
35,4
2,7
330
18
>4
3/4 - 1
30-35
936035
35X40
34,5
40
2,8
420
20,5
>4
1 - 1 1/4
35-60
936044
44X50
43,5 49,5
3
600
23
>4
936056
56X65
56
63
3,5
850
26
>4
1 1/2 - 2
50-90
936065
65X75
64
72,5
4,3
1150
30
>5
2
60-120
936080
80X90
81
91
5
1600
35
>5
2 1/2
75-200
9360100 100X112 103
115
6
2200
46
>5
3
90-220
9360120 120X132 124
136
6
2850
50
>5
4
110-240
METHOD OF CALCULATION Outside Ø Hose mm X Hose Length mt Inside Ø Spiralina mm
=
mt Spiralina
1 1/4 - 1 1/2 35-75
3
Mento Hoses and Couplings Catalogue
8-4. Hose Clamps/Fittings/Safety Equipment
Safety Stockings "Chinese finger" Safety stockings from braided steel wire, to keep hoses in place in case couplings by a ccident should blow off.
Galvanised Stainless Steel
Part No. D1 D2 D3 D4 D5 D6 D7 D8 D9
Size range mm 10-13 13-19 19-25 25-38 38-50 50-63 63-89 89-115 115-130
Part No. D1-SS D2-SS D3-SS D4-SS D5-SS D6-SS D7-SS D8-SS D9-SS
Galvanised Approx Lattice length Overall length breaking strength Lattice weave mm mm kg Single 230 305 760 Single 355 430 1,015 Single 405 510 2,540 Single 455 610 3,555 Double 535 735 5,080 Double 610 865 5,080 Double 685 990 6,095 Double 685 990 7,110 Double 685 990 7,110
Stainless Steel Approx breaking strength kg 610 810 2,030 2,845 4,065 4,065 4,875 5,690 5,690
Whipcheck
Wire Rope
Whipcheck Safety Cables
AISI 316 Stainless Steel 6 mm x 500 mm C/W Swaged Socket Eyes AISI 316 Stainless Steel 6 mm x 700 mm C/W Swaged Socket Eyes
Part No. WB1 WCS1 WA2
Cable 1/8” 1/8” 1/4”
Size 1/2”-1.1/4” 1/2”-1.1/4” 1.1/2”-3”
Length 20.1/4” 20.1/4” (AISI 304) 38”
Carabine Hook Snap Hook with screw 8 mm x 75 mm AISI 316 Stainless Steel
Vekt gram
12
Part No. 0351708
Dim. 8 x 75
Max. kg 690
Weight g 76
Part No. 0100160 0100160-70
Cable mm 6 6
Material AISI 316 AISI 316
Length mm 500 700
4