Mento Hoses and Couplings Catalogue
2. Loading/Oil/Bulk Hoses and Accessories
Loading /Oil / Bulk Hoses and Accessories • • • • • • • • • • • • • • • • • • • •
2.
Oil Petrol G5600 2-1 OD 6561 UNISOL SD 20 2-2 OSD 6661 Rig Supply Softwall 2-3 Rig Supply Hardwall Rig Supply Softwall Wearstrip 20 Bar 2-4 Rig Supply Hardwall Wearstrip 20 Bar EasyFloat - LT 2-5 Rig Supply Easy Float Multistream Softwall 27 Bar 2-6 Multistream Hardwall 27 Bar Multistream Easy Float 27 Bar 2-7 Salamander Floating Hose for Fuel and Oil Suction and Delivery Salamander Floating Hose for Liquid Mud Suction and Delivery 2-8 Salamander Floating Hose for Bulk Material Suction and Delivery Salamander Floating Hose for Potable Water Suction and Delivery 2-9 Potable Water Softwall Potable Water Hardwall 2-10 Rig Supply Hardwall Wearstrip 40 Bar
5. EDITION
Mento Hoses and Couplings Catalogue
2. Loading/Oil/Bulk Hoses and Accessories
Loading / Oil / Bulk Hoses and Accessories • • • • • • • • • • • • • • • • • • • • • •
Versafuel Dock Dry Cement Softwall DO16HFR Colour coding of loading hoses/end fittings FlowSafe Mini Floats, BPB-series DIXON Holedall IX Coupling System for Offshore applications Full Bore Swage Couplings Full Bore Swage Couplings DDCouplings DDC Hose unit DDC Tank unit / Dust plug / Dust cap Break-away coupling - Advantages Break-away coupling Hose Swivels - single ball bearing Heavy Duty Swivels - double ball race Hose Lifter Close/Swage Nipples NPT/BSP/WELD Anson Hammer Lug Unions Flanges Flange Gaskets Studbolts for Flange
2. 2-11 2-12 2-13 2-14 2-15 2-16 2-17 2-18 2-19 2-20 2-21 2-22 2-23 2-24 2-25 2-26 2-27
5. EDITION
Mento Hoses and Couplings Catalogue
2-1. Loading/Oil/Bulk Hoses and Accessories
Oil Petrol G5600
OD 6561
Multipurpose hose, black smooth
Tanktruckhose according to EN 12115
Part ID/OD Number inch mm
Bending Burst radius pressure mm Bar
Weight kg/m
202005
3/16
5.0 x 11.4
40
60
0.11
202006
1/4
6.3 x 12.7
50
60
0.13
202008
5/16
8.0 x 14.4
65
60
0.15
202010
3/8
10.0 x 17.0
80
60
0.20
202013
1/2
12.5 x 21.5
100
60
0.33
202016
5/8
16.0 x 25.4
130
60
0.42
202020
3/4
20.0 x 30.0
160
60
0.54
202025
1
25.0 x 36.0
200
60
0.73
202032
1 1/4 31.5 x 45.5
250
60
1.19
202038
1 1/2 38.0 x 52.0
305
60
1.40
Part Number
inch
ID/OD mm
Bending radius mm
Weight kg/m
209032
1 1/4
32 x 44
320
0.87
209038
1 1/2
38 x 51
380
1.07
209051
2
51 x 67
500
1.70
209063
2 1/2
63 x 79
630
2.00
•
resistant to hydrocarbons with max 55% aromatic contents
•
electrically conductive compound R < 1 Mega Ohm
•
oil, weather and ozone resistant cover
•
kink resistant, good dimensional stability
Working Pressure:
20 Bar
Burst Pressure:
64 Bar
water max 80°C
Temperature:
–30°C + 80 °C
•
inert gases
Liner:
NBR
•
cover with excellent resistance to abrasion, oils and weathering
Colour:
Black
•
flexible and kinkresistant
Cover:
CR
•
excellent cold flexibility
Colour:
Black
Branding:
--->EN 12115 NBR 1
Lengths:
40 m
•
suitable for oils, fuels, hydraulic fluids, air, water, chemicals, petrol, grease
•
Working Pressure:
20 Bar
Burst Pressure:
60 Bar
Temperature:
–30°C + 93 °C
Tube:
NBR
Colour:
Black
Cover:
NBR / EPDM
Colour:
Black
Branding:
OPTIMIT OIL PETROL HOSE WP20BAR DIA
Lengths:
50 m
1
Mento Hoses and Couplings Catalogue
2-2. Loading/Oil/Bulk Hoses and Accessories 2
UNISOL SD 20
OSD 6661
Smooth liner, Textile Cord with Twin Steel helix, smooth cover
Tanktruckhose with spiral according to EN 12115
SD 6661
al overeen-
rstoffen t/m
bele stalen s bber
endige buitenwand
irale nach
sserstoffe bis
ppelter Stahlspirale
1 Mega Ohm ozonbestaendige
according
ns with max.
th twin spiral s < 1 Mega Ohm resistant cover
12115 N 12115 115
OSD 6661
Part Number
ID/OD mm
mm
Bending radius mm
met spiraal overeenWerkdrukTankwagenslang / Betriebsdruck / Working pressure 206051 komstig 51 66 EN 12115 305 met Barstdruk / Berstdruck / Burstpressure
Weight kg/m
Part Number
ID/OD inch
Bending radius mm
mm
16 Bar
Werkdruk / Betriebsdruck / Working pressure
64 Bar
Barstdruk / Berstdruck / Burstpressure
1.6
212019
3/4
19 x 31
120
212025 25 x 37 / Temperature 150 -30 C + 80 C Temperatuur Temperatuur / Temperatur / Temperature / 1Temperatur - geschikt voor koolwaterstoffen t/m Inwendig / Seele / Liner Inwendig / Seele / Liner NBR 1 aromatenaandeel • NBR/PVC55% Polyblend has very good weathering and ozone 212032 1 1/4 32 x 44 200 Kleur / Farbe / wider Colour Kleur / Farbe / Colour zwart/schwarz/black - textielinlagen dubbele stalen restistance, range met resistance against non polar spiraal en twee various a/s wires 212038 / Decke 1 1/2/ Cover 38 x 51 230 Uitwendig / Decke Cover Uitwendig CR chemicals, salt /solutions, formates and elektrisch geleidend rubber Kleur / Farbe /and Colour Kleur / Farbe / Colour zwart/schwarz/black de-scalers better abrasion resistance than standard 205051 2 51 x 65 300 R < 1 Mega Ohm NBR. - olie, ozone en weerbestendige buitenwand •
•
212063
Resistance to aliphatic hydrocarbons comparable to
Markering standard NBR, however only limited resistance to Markierung ENSpirale 12115 Tankwagenschlauch mit nach NBR aromatic hydrocarbons. Branding EN 12115
Max operating temperature for aliohatic hydrocarbons
1
2 1/2
63 x 78
380
Markering Markierung EN Branding • suitable for hydrocarbons with
Weight kg/m 16 Bar
0.72
64 Bar
0.80C + 80 C -30 NBR 1
0.98
zwart/schwarz/black
1.14CR
zwart/schwarz/black 1.69
2.40
12115 NBR 1
max. 55% aromatic contents
geeignet Kohlenwasserstoffe 93°C,-Air Uitwendig and waterfuer andVakuum aqeuous solutions maxbis 70°C. GewichtInwendig Uitwendig Inwendig Buigstraal Vakuum • textile reinforcement with twin spiral Buigstraal and two anti static Gewicht 55% Innen A u s sAromatenanteil en Biegeradius GewichtI n wires nen Aussen Biegeradius Gewicht Vakuum Vakuum - O Textieleinlagen mit doppelter Stahlspirale W e i g h tI n s i d e I n s i d e u t s i d e Bendradius O u t s i d e Bendradius Weight Vacuum Vacuum see resistanceund chart EN 12115 zwei Kupferlitzen • electrically conductive R < 1 Mega Ohm mm - elektrisch mm Bar R < 1 Mega mmOhm kg/m mm mm Bar mm kg/m leitfaehig cover 120 witterungs0.9 - und ozonbestaendige 120 0.72 • Oil, 0.72 19 - Oel, 31 19 weather and 0.9 31 ozone resistant Working Pressure: 20 Bar Decke 150 150 0.80 0.80 25 25 0.9 0.9 37 37 Burst32Pressure: 44 60 Bar 0.9 200 200 0.98 0.98 32 44EN 12115 0.9 see resistance chart 230 230 1.14 1.14 38 38 0.9 0.9 51 51 Temperature: –15°C + 93°C 300 300 1.64 1.64 50 Tanktruckhose 50 0.9 0.9 64 64 with spiral according Tube:51 EN 12115 Polyblend 300 300 1.69Working 1.69 51 Pressure: 0.9 65 NBR/PVC 65 16 Bar 0.9 380 380 2.40Burst53 2.40 53 78 Black 0.9 Colour: Pressure: 78 64 Bar 0.9 with 450max. 450 2.77 2.77 75 - suitable 75 0.9 0.9 90 for hydrocarbons 90 80°C 55% 91 aromatic contents Cover: NBR/PVC Polyblend 450 450 2.83Temperature: 2.83 76 76 0.9 91 –30°C + 0.9 - textile reinforcement with twin spiral 540 540 3.52Tube:90 3.52 90 0.9 105 105 NBR 1 0.9 Colour: and twoBlack anti static wires 600 600 3.82 100 3.82 100 0.9 0.9 116 116 - electrically conductive R < 1 Mega Ohm Colour: Black 0.9 Branding: -->EN 12115 NBR 1 610 610 3.95 3.95 102 - Oil,118 102 0.9 118 weather and ozone resistant cover 760 760 6.62 127 6.62 127 0.9 0.9 145 145
Lengths:
60 m
zie bestendigheidstabel EN 12115 siehe Bestaendigkeitsliste EN 12115 see resistance chart EN 12115
Lengten/Längen/Lenghts:
40m dia 19 - 102 20m dia 127
Cover:
CR
Colour:
Black
Branding:
-->EN 12115 NBR 1
Lengths:
40 m
Lengten/Längen/Lenghts:
40m dia 19 - 102 20m dia 127
Mento Hoses and Couplings Catalogue
2-3. Loading/Oil/Bulk Hoses and Accessories
Rig Supply Softwall
Rig Supply Hardwall
Heavy duty flat bunker hose for dockloading and supply of offshore drilling rigs
Spiral bunker hose for loading and unloading tankers and connection between server and platform for a wide range of fluids and solids.
Part Number
inch
ID/OD mm
Bending radius mm
Weight kg/m
204076
3
76 x 90
600
2.85
Part ID/OD Number inch mm
204102
4
102 x 116
820
3.99
205076
3
76 x 92
0.9
450
3.35
204127
5
127 x 143
1020
4.99
205102
4
102 x 119
0.9
620
4.75
204152
6
152 x 170
1220
5.20
205127
5
127 x 148
0.9
760
7.10
204203
8
203 x 223
1620
8.05
205152
6
152 x 172
0.9
920
8.54
204254
10
254 x 280
2030
14.00
205203
8
203 x 230
0.8
1230
10.15
205254
10
254 x 293
0.8
2540
14.50
•
tube resistant to hydrocarbons up to 55% aromatic contents, cement, barytes, oils
•
high tensile synthetic plies with encapsuled PP barrier
•
abrasion and oil resistant cover
•
stainless steel a/s wire -elongation < 4% at 20 Bar
Working Pressure:
20 Bar
Burst Pressure:
60 Bar
Temperature:
–40°C + 93 °C
Tube:
Vacuum Bending Bar radius mm
Weight kg/m
•
resistant to hydrocarbons up to 55% aromatics
•
four high tensile synthetic cord plies with high tensile twin spiral
•
high abrasion and oil resistant cover
•
elongation <4% at 20 Bar
Working Pressure:
20 Bar
Burst Pressure:
60 Bar
NBR
Temperature:
–30°C + 93 °C
Colour:
Black
Tube:
NBR
Cover:
CR
Colour:
Black
Colour:
Black
Cover:
CR
Branding:
YELLOW CONTITECH RIG SUPPLY SW WP20 BAR BP60 BAR -M-
Colour:
Black
Lengths:
dia 76 – 152
max 122 m
Branding:
YELLOW CONTITECH RIG SUPPLY HW WP20 BAR BP60 BAR -M-
dia 203
max 30.5 m
Lengths:
dia 51–102
max 122 m
dia 254
max 20 m
dia 127–152
max 61 m
dia 203
max 30.5 m
3
rstrip
dling drilling rials, glycols
Mento Hoses and Couplings Catalogue
2-4. Loading/Oil/Bulk Hoses and Accessories 4
Medium Pressure hose for handling drilling muds, crude oil, abrasive materials, glycols and drilling fluids
Medium Pressure hose for handling drilling muds, crude oil, abrasive materials, glycols and methanol/water mixes
Part Number
Bending Burst Weight radius pressure kg/m mm Bar Medium Pressure handling Werkdruk / Betriebsdruck / Work. pressure 204102SB 4 102hose x 121 for 800 68drilling4.00 muds, crude oil, abrasive materials, glycols at 3 bar Barstdruk / Berstdruck / Burstpressure and drilling fluids Temperatuur / Temperatur / Temperature
-
UV, ozone resistance
-
-
aged high
-
mperature l UPE wear er for extra
-
s 13m/sec*
-
uid nnect a/s
Rig Supply Hardwall Wearstrip 20 Bar
LM-SW 2MPA Wearstrip
mivic tube. ns with tents cols and
charge
Rig Supply Softwall Wearstrip 20 Bar
ID/OD
inch
mm
Part Number
ID/OD inch
mm
Bending radius mm
Burst pressure Bar
Weight kg/m
20 Bar / Betriebsdruck 20 Werkdruk 205102SB 4 102 x 130 / Work. 800 pressure 60 4.80 see Barstdruk below/ Berstdruck / Burstpressure see - 20°C Temperatuur + 93 °C / Temperatur / Temperature - 20°C • high abrasion resistant Chemivic tube. also resistant to Inwendig / Seele / Liner Inwendig Chemivic / Seele / Liner Che • highabrasion abrasion resistant Chemivic tube. alsotube. resistant to hydrocarbons with maximum 30% aromatic contents high resistant Chemivic zwart/sch Kleur / Farbe with / Colour Kleur / Farbe / Colour hydrocarbons maximum 30% aromatic contents zwart/schwarz/black seawater, drilling muds, glycols and methanol also resistant to hydrocarbons with EPDM EP Uitwendig / Decke / Cover Uitwendig / Decke / Cover • seawater, drilling muds, glycolscontents and methanol/water maximum 30% aromatic • EPDM cover with excellent UV, ozone and seawater mixes zwart/schwarz/black zwart/sch Kleur / Farbe / Colour Kleur / Farbe / Colour resistance. Oil resistance RMA class C seawater, drilling muds, glycols and methanol/water mixes UV, ozone and seawater • EPDM cover with excellent • high tensile steel spiral for vacuum of max 0,8 bar resistance. resistance RMA class EPDM coverOilwith excellent UV,C ozone • available with built in or swaged high pressure couplings and seawater resistance. Oil resistance • built in a/s for safe discharge of static electricity Markering / wires Markierung / Branding: Markering / Markierung / Branding: RMA class C • alsostripe available with additional UPE wear strip vulcanized yellow stripe built in or swaged high pressure yellow • available built in a/swith wires for safe discharge to hose cover for extra protection against abrasion of couplings static electricity • also available additional wear strip vulcanized available withwith built in or UPE swaged high Working Pressure: 20 Bar to hose cover for extra protection against abrasion pressure couplings Inwendig Uitwendig Barstdruk Inwendig GewichtUitwendig Barstdruk Buigstraal Temperature: –20°C + 93 °C Buigstraal all technical datawith at fluids room temperature • Innen max. flow velocity 13m/sec* Aussen Biegeradius Berstdruck Biegeradius Berstdruck Innen GewichtAussen also available with additional UPE wear *depending on Outside properties of fluid. Bendradius Tube: Chemivic Burstpressure Bendradius Burstpressure Inside Inside Weight Outside strip vulcanized to hose cover for extra Colour: Black protection against abrasion mm Bar mm k g / m m m mm Bar mm Pressure: m Working 20 m Bar max. flow velocity with fluids 13m/sec* Cover: EPDM Temperature: –20°C + 93 °C Black 102 116 800* 68 Colour: 1 0 2 4,00 116 800* 68 Tube: Chemivic at 3 Bar at 3 Bar Branding: Yellow stripe Colour: Black Lengths: max. lengts standard transport Cover: EPDM dia 4” 61 m dia 5” 30 m Colour: Black dia 6” 30 m Branding: Yellow stripe dia 8” 20 m Lengths:
max. lengths standard transport dia 4” 122 m
*depending on properties of fluid We recommedn always to connect a/s wires to the couplings
max. lenghts standard transport
max. lenghts standard transport
Mento Hoses and Couplings Catalogue
2-5. Loading/Oil/Bulk Hoses and Accessories
EasyFloat - LT
Rig Supply Easy Float
SY FLOAT ™
ating supply hoses to the d gas/oil production sector. nes the floating characPart hoses ID/OD nwendig: Innen: Bending NBRWeight large boreNBR floating Number radius kg/m leur: bore hoses Zwart Farbe: Schwarz mall between mm mm mm
Uitwendig:
EPDM
10FFLE102 EASYFLOAT LT nsists of : leur: Zwart
Aussen:
102 116 x 156 Farbe:
600
The floating material is well proven closed cell foam used in OCIMF hoses with an additional orange rubber EASYFLOAT - LT cover and reflective stripe Inside:
NBR
Colour:
Black
EPDM
Outside:
EPDM
Schwarz
Colour:
Black
5.00
roduced 10FFLE127 in long EASYFLOAT lenghts 5 127 143 x 183 750 6.00 3/4" Foam construction is suitable for all integrated floating hose system Floating material can be combined with dNew totype the required fluids or fluid/solid suspensions with a liminating use of floating elements. various hose types like Rig Supply SW, work shop including 1,2. nhanced one• piece lenghts Potable Water SW. New typewithout integrated floating hose system eliminating Part specific gravity ofID/OD Softwall Floating onnect to the supply use floating lenghts onnectors : Max.of length of elements. Enhanced Max.one flowpiece velocities 13m/sec. Number m m hose section can be Working pressure Rig Supply SW inch mm 20 Bar without connectors : Max. lengthMax. of total onedepending piece on inner hose. end load New cover compound on both inner hose otal one piece hose line is 122m in various up to 30,5m . line is 122m in various configurations Burstpressure Rig Supply SW 60 Bar EASYFLOAT-15-15 102offers x 116/190 15and 15 hose ofseawater free hose Black UV and and floating4section excellent UV onfigurations of free hose and floating al is well proven closed and floating sections. Standard configuration uses max. velocity 13m/ sec resistantflow cover with highly reflective EASYFLOAT-15-30 seawater and ageing resistance especially ections. Standard configuration uses a 4 102 x 116/190 15 30 CIMF hosesa 3/4" with anclosed cell , vulcanized foam with good thick stripe to faciliatetemperature night operations. when fitted on hose reels /4" thick closed cell , vulcanized foam Operating - 30°C + 93 °C ubber coveradhesion and reflective towards inner hose cover and outer cover of EASYFLOAT-20 4 102 x 116/190 1 20 with good adhesion towards inner hose cover Liner depending on service floating section Hose specs5below for Rig Supply1SW nd outer cover of floating section EASYFLOAT-5-20-1,6 127valid x 143/225 Floatation section foam / orange 20
EASYFLOAT - LT
•
Floating material can be combined with various hose
inner hose
connectingtypes the like floating Floating hose od’s are based on 1 1/2" floatation material and Rig Supply SW, Potable Water SW. Max. Inside:flow NBR Wear SUPPLY SOFT WALL HOSE grey with yellow on on platformRIG hose velocities load strip depending m. This hose can be 13m/sec. Max. end inner hose. Black UV and seawater resistant cover with onal integrated wear stripe • no more loose floating elements in the hose line which highly reflective stripe to faciliate night operations. Colour: Black e additional abrasion get lost, entangled on reels or shifting on the hose line 3/4" Foam construction e can be• supplied in lenghtsis suitable for all fluids or fluid/ • Gewicht long lenghts without metal parts reducing risk of Buiten Buigstr. Vakuum solid suspensionsBinnen with a specific gravity of 1,2. Outside: EPDMAussen Markering / Markierung /Gewicht Branding: yellow layline, reflective strip propellor damage Innen Biegerad. Vakuum
Artikel Nr Artikel Nr Article Nr
Insideon both Outside New cover compound inner hoseBendrad. and floatingVacuum ø mm ø mm mm section offers excellent UV and seawater and ageing Bar oating elements in the resistance especially when fitted on hose reels
ges:
Colour:
Black
•
Weight 3“ thick floating material supports all media with max gr/m
density 3.0 1 1/4“ floating material supports media with max. density 1.6
get lost, entangled on Outside • 5000 Bendradius Vacuum Inside 600 10FFLE102 116/156 Normen / Standards: elimates need to calculate number of floatingWeight devices on the hoseHose linespecs below 102 valid for Rig Supply SW 750 10FFLE127 127 143/183 6000 and buoyancy hout3/4" metal parts Foam construction is suitable for all inner hose mm mm Bar kg/m mm • the compact and strong construction propellor damage Temperatuurbereik (zie medium)makes this hose especiallyTemperaturbereich suitable for use (siehe on reels ghts and line fluids or fluid/solid suspensions with a Medium) Burst Pressure: 60 Bar Temperature range media) e possible using • reflective stripe makes the (see floating hose easily visible in -25 °C + 80 °C Working Pressure: 20 Bar 76 610 ~ 240* depennight operations dilyspecific available in our stocks gravity of 1,2. 102 800 can also be ding ~ 270* The floating section materialTemperature: supports all –40°C + 93 °C combined with other Werkdruk Barstdruk density 3.0 127 1020 ~ 295* on special hoses like HP hose for drill cuttings, potable water Betriebsdruck Platzdruck Inside: NBR aterial supports media Working Pressure Burst Pressure 152 ~ 330* hose etc. 1250 inner Black 20 bar 60 bar y 1.6 NewColour: cover compound on both inner hose hose calculate number of EPDM Outside: Working Pressure: 20 Bar Markering / Markierung / Branding: andand buoyancy floating section offers excellent EASYFLOAT LT WP Serial * Floating hoseUV od’s and are based on 3” floatation material and Colour: Black Burstpressure: 60 Bar strong construction makes RIG SUPPLY SOFT WALL HOSE °C Branding: EasyFloat LT WP lly seawater suitable for use reels andonageing resistance especiallyTemperature: Lengten /–30°C Längen+/ 93 Lengths: makes the floating hose max 120m one piece * piece For vacuum service RIG WALL is utilized Tube: SUPPLY HARD Chemivic Lengths: max. 122 m one ight operations when fitted on hose reels
can also be combined with like HP hose for drill cutr hose etc specs below valid Hose
Floatation section:
foam / orange
Wear strip on platform hose
grey with yellow stripe
for Rig2016 Supply- -SW max. flow velocity:
13m/ sec
Branding: yellow layline, reflective strip Raadpleeg altijd Technische Documentatie - Bitte Technische Dokumentation beachten - Always consult Technical Documentation pplied with RFID chip inner hose Technische wijzigingen voorbehouden, Techn. Änderungen möglich ohne vorige Ankündigung, Tech.data subject to change without prior notice management
available: compound combining the oil
5
Mento Hoses and Couplings Catalogue
2-6. Loading/Oil/Bulk Hoses and Accessories 6
Multistream Softwall 27 Bar
Multistream Hardwall 27 Bar
High Pressure Hose for Offshore supply operations and Ship to Shore service
Suction and Discharge Hose for Offshore supply operations and Ship to Shore service
MU Part Number
inch
ID/OD mm
Bending radius mm
Weight kg/m
224076SB
3
76 x 94
Inwendig: 224102SB 4 B3380 102 x 122
760
2.80
1020
3.84
225076SB 3 76 x 94 450 Inwendig: B3380 Innen: B 3380
Kleur 224127SB
1270
4.70
Kleur Farbe:
224152SB 6 Chemivic™ 152 x 178 1520 Uitwendig:
7.30
Uitwendig: Chemivic™ Aussen: Chemivic™ 225152SB 6 152 x 180 910
Kleur •
5
zwart 127 x 146
•
50 % lower abrasjon than conventional NBR compounds Hoge druk persslang voor offshore • 4:1 safety factor toepassingen
• • speciale non stick binnen suitable for Dragchains, elongation 2% at 12 Bar slijtvast, olie• wand, cover withzeer UPE wearstrip bestendig • four plies high tensile cord reinforcement with a/s wire • 50 % lagere slijtwaarde dan • suitable for Mud, Drill cuttings, Baryte, Cement, Diesel NBR compounds • 4:1 safety factor Pressure: 27 Bar •Working geschikt voor dragchains, Burst Pressure: 108 Bar lengterek 2% bij 12 Bar Temperature: –30°C + 70slijt °C strip • uitwendige UPE B 3380 •Tube: vier cordinlagen met a/s draad •Colour: geschikt forBlack Mud, Drill cuttings, Baryte,Cement, Cover: Chemivic Diesel Colour:
Black
Branding:
CONTITECH MULTISTREAM SW-HD WP27 BAR S.F. 4:1
Artikel Lengths: Nr Artikel Nr Article Nr
76 102 127 152
ID/OD inch
225102SB
4
225127SB
5
Kleur Farbe
zwart
special non stick high abrasion and oil resistant tube
max 122 m Binnen dia 152 - 61 m Innen Inside ø mm
Part Number
•
mm
Bending radius mm
Vacuum Bar
Weight kg/m
0,9
3.80
102 x 124
620
0,9
5.62
127 x 148
760
0,9
7.30
0,9
10.50
zwart schwarz
In Tu
Fa Co
Au Co
Fa Co
zwart schwarz
special non stick high abrasion and oil resistant tube
•
50 % lower abrasion than conventional NBR Hoge druk persslangfuer voorOffshore offshore Hochdruckschlauch compounds toepassingen einsaetze • 4:1 safety factor •• speciale non stick binnen non stick, hoch abriebfeste , • suitable for Dragchains, elongation 2% at 12 Bar wand, zeer slijtvast, oelbestaendige Seeleolie• bestendig cover with UPE wearstrip • 50 % niedrigerer Abrieb als four% plies high tensileslijtwaarde cord reinforcement with a/s wire •• 50 lagere dan bei Standard NBR Mischungen suitable for Mud, Drill cuttings, Baryte, Cement, Diesel •• NBR 4:1 compounds Sicherheitsfaktor •• 4:1 safety aussen mitfactor UPE Scheuerschutz•Working geschikt voor streifen Pressure: 27 Bardragchains, lengterek 2% Bar •Burst vier Kordeinlagen mit Litze Pressure: 108 Barbij 12 ••Temperature: uitwendige UPE strip geeignet for Mud, cuttings, –30°C + 70slijt °CDrill •Tube: vier cordinlagen met a/s draad Baryte,Cement, B 3380 Diesel en stalen spiraal Colour: Black • geschikt for Mud, Drill cuttings, Cover: Chemivic Baryte,Cement, Diesel Colour:
Black
Branding:
CONTITECH MULTISTREAM HW-HD
Ho Hi ein su •Shn •o • 5 •b • •• • • • •• g B •
WP27 BAR S.F. 4:1 Binnen Buiten BuitenArtikel Buigstr. Vakuum Gewicht Nr Lengths: max 122 m Innen Gewicht Aussen AussenArtikel Biegerad Vakuum Nr dia 152 - 61 m Inside Weight Outside OutsideArticle Bentrad. Vacuum Nr ø mm ø mm mm Bar gr/mø mm
94 122 146 178
760 1020 1270 1520
76 102 127 152
2800 94 Nor 3840 124 4700 148 7300 180
Mento Hoses and Couplings Catalogue
2-7. Loading/Oil/Bulk Hoses and Accessories
7
Multistream Easy FloatABCD Salamander Floating Hose for Fuel and Oil 27 Bar Salamander Fuel and Oil Suction and Delivery The floating material is well proven closed Suction and Delivery
FLOATING HOSE
cell foam used in OCIMF hoses with an additional orange rubber cover and reflective stripe for improved visibility
Construction: Tube: Black NBR . Reinforcement: High Tensile Textile Cords with Embedded Steel Helix Wire and Antistatic Wire. Intermediate Cover: Black CR/BR Blend. Flotation Element: 2 Layers of PE Foam. Cover: Black CR/BR Blend, Abrasion, Ozone and Hydrocarbon Resistant Temperature Range: -30°C To +100°C.
Part Number
Typical Application: Fuel Oil Delivery, with up to 50% Aromatic Content, suitable for Seawater, Mud and general offshore applications, long lasting in bunkering applications.
ID/OD
Softwall Floating Part ID/OD Min. Bend. Weight Minimum Reserve Buoyancy of 25% Using OCIMF Standard Calculations For All hose. m m Number radius kg/m inch mm inch mm Depending On Specific Gravity of Medium Transported. Note: Finished Hose Dimensions May Be Subject To Change mm e MULTISTREAM SW 27 Bar EASYFLOAT27-20 4 102 x 122/200 1 20 MULTISTREAM SW 108 Bar DO20HFL-64 4 102 x 176 550 10.80 Branding: - OIL S&D - 20 Bar WP - abcd EASYFLOAT27-15-30 4 102 x 122/200 30 ty 13m/15sec DO20HFL-80 5 127 x 204 700 13.60 erature EASYFLOAT27-5-20 - 30°C +1 70 °C 20Black Text on a Red Spiral Stripe. 5 127 x 143/230
depending on service
on
Floating hose od’s are based on 1 1/2" floatation material and foam / orange RIG SUPPLY SOFT WALL HOSE
• no more loose floating elements in the hoseyellow line which atform hose grey with get lost, entangled on reels or shifting on the hose line stripe •
long lenghts without metal parts reducing risk of propellor damage
kierung / Branding: yellow layline, reflective strip. • 3“ thick floating material supports all media with max se is individually numbered
density 3.0 1 1/4“ floating material supports media with max. density 1.6
Outside mm
•
elimates need to calculate number of floating devices and buoyancy
•
the compact and strong construction makes this hose especially suitable for use on reels
•
reflective stripe makes the floating hose easily visible in night operations
Bendradius
Vacuum
Weight
mm
Bar
kg/m
The floating section can also be combined with other 610 ~ 250* depenspecial hoses like HP hose for drill cuttings, potable water ~ 280* hose etc. 800 ding
~ 300* ~ 340*
1020 1250
Working Pressure:
27 Bar
Burstpressure:
108 Bar
on inner hose
Temperature: –30°C + 70 °Cmaterial and e od’s are based on 3” floatation SOFT WALL Tube: HOSE B3380 Floatation section:
foam / orange
Wear strip on platform hose
grey with yellow stripe
service MULTISTREAM HW is utilized
max. flow velocity: 13m/ sec Branding:
yellow layline, reflective strip. Each floating hose is individually numbered
Inside Dia Working Pressure:
O.D. 20 Bar
PSI
Bar
PSI
4
–30 °C 176+ 100 °C 20
Min Bend Rad mm
Min. Burst Pressure:
80 Bar
300
80
1200
550
10.80
5
Black204 NBR
300
80
1200
700
13.60
Part No
mm
Temperature: DO20HFL-064 102 DO20HFL-080
Tube:
Inch
127
mm
Working Pressure Bar 20
Minimum Burst Pressure
Reinforcement:
High Tensile Textile Cords with Embedded Steel Helix Wire and Antistatic Wire
Intermediate Cover:
Black CR/BR Blend
Flotation Element:
2 Layers of PE Foam
Cover:
Black CR/BR Blend, Abrasion, Ozone and Hydrocarbon Resistant
Branding:
OIL S&D - 20 Bar WP - Black Text on a Red Spiral Stripe
Head Office ContiTech Beattie Limited, Jubilee Industrial Estate, Ashington, Northumberland, NE63 8UB, England TypicalTel:Application: Fuel OilE-mail: Delivery, with up to 50% 01670-528700, Fax: 01670-520535, sales@contitechbeattie.co.uk , Web Site: www.contitechbeattie.co.uk Aromatic Content, suitable for Seawater, Mud and general offshore applications, long lasting in bunkering applications. Minimum Reserve Buoyancy of 25% Using OCIMF Standard Calculations For All hose. Note: Finished Hose Dimensions May Be Subject To Change Depending On Specific Gravity of Medium Transported.
Weight Kg/M
DSDO20HFL-01
Mento Hoses and Couplings Catalogue
8
2-8 Loading/Oil/Bulk Hoses and Accessories
Salamander Floating Salamander Floating ABCD Hose for Bulk Material Hose for Liquid Mud Salamander Liquidand Mud Suction and DeliverySalamander Bulk Material Suction and Delivery Suction and Delivery Suction Delivery
FLOATING
FLOATING HOSE
Construction:
Construction:
Tube: Black NBR.
Tube: Black SBR/NR Blend, Abrasion Res
Reinforcement: High Tensile Textile Cords with Embedded Steel Helix Wire and Anti Static Wire.
Reinforcement: High Tensile Textile Cord Embedded Steel Helix Wire.
Intermediate Cover: Black CR/BR Blend;
Intermediate Cover: Black IR/BR Blend;
Flotation Element: 3 Layers of PE Foam.
Flotation Element: 3 Layers of PE Foam
Cover: Black CR/BR blend, Abrasion, Ozone and Hydrocarbon Resistant.
Cover: Black IR/BR blend, Abrasion, Ozo Hydrocarbon Resistant.
Temperature Range: -35°C To +85°C.
Temperature Range: -35°C To +85°C.
Typical Application: Specially designed heavy duty Barite and Cement delivery to Typical Application: Crude Oil and Min. Grit suction & delivery in offshore applications. Also suit- Bulk Material Delivery. Part : Liquid Mud containing ID/OD Bend. Weight Part ID/OD Min.forBend. Weight offshore platforms. able for Fuel Oil suction & delivery with up to 50% Aromatic Content.
Number
radius mm
inch mm Suitable for media of up to specific gravity of 1.6 g/cm3.
kg/m
Minimum Reserve Buoyancy of 25% Using OCIMF Standard Calculations For All hose.
4
LM40HFL-64
102 x 207
700
13.50
Number
inch
radius mm
mm
Suitable for media of up to specific gravity of 1.6g/cm3
kg/m
Minimum Reserve Buoyancy of 25% Using OCIMF Standard Calculations For All hose.
BM20HFL-64
4
102 x 203
550
12.10
BM20HFL-80
5
127 x 230
700
14.70
Finished Hose Dimensions May Be Subject To Change Depending On Specific Gravity of Medium Trans Note: Finished Hose Dimensions May Be Subject To Change Depending On Specific Gravity of Note: Medium Transported.
Working Pressure:
40 Bar
Branding:
Min. Burst Pressure:
160 Bar
Black Text on a Yellow Spiral Stripe.
Branding:
Tube:
mm
Pressure
Inch
LM40HFL-064 102 Reinforcement:
4
Working Pressure:
–35 °C + 85 °C O.D. Working
Temperature: Part No Inside Dia
- BULK MATERIAL S&D - 20 Bar WP - abcd -
Black NBRBar mm 207 Tensile 40 High
PSI
Minimum Burst Pressure Bar
600Cords160 Textile with
PSI 2400
Embedded Steel Helix Wire and Anti Static Wire
20 Bar
Min. Burst Pressure:
80O.D. Bar
Temperature: mm
–35 mm°C + 85 Bar°C
MinPart No Weight Bend Rad mm Kg/M BM20HFL-064 700 13.50
Tube:
BM20HFL-080
Inside Dia
Inch
102
4
127
5
203
Working Pressure
20
Minimum Burst Pressure
PSI
Bar
PSI
Min Bend Rad mm
300
80
1200
550
12
700
14
Black SBR/NR Blend, Abrasion 230 20 300 80 1200 Resistant
Reinforcement:
High Tensile Textile Cords with Embedded Steel Helix Wire
3 Layers of PE Foam
Intermediate Cover:
Black IR/BR Blend
Cover:
Black CR/BR blend, Abrasion, Ozone and Hydrocarbon Resistant
Flotation Element:
3 Layers of PE Foam
Branding:
LIQUID MUD S&D - 40 Bar WP
Cover:
Black IR/BR blend, Abrasion, Ozone and Hydrocarbon Resistant
Branding:
- BULK MATERIAL S&D - 20 Bar WP - Black Text on a Yellow Spiral Stripe
Typical Application:
Bulk Material Delivery. Specially designed for heavy duty Barite and Cement delivery to offshore platforms. Suitable for media of up to specific gravity of 1.6g/cm3. Minimum Reserve Buoyancy of 25% Using OCIMF Standard Calculations For All hose. Note: Finished Hose Dimensions May Be Subject To Change Depending On Specific Gravity of Medium Transported.
Intermediate Cover:
Black CR/BR Blend
Flotation Element:
Typical Application: ContiTech Beattie Ltd
We
Kg
Head Office ContiTech Beattie Limited, Jubilee Industrial Estate, Ashington, Northumberland, NE63 8UB, England Jubilee Industrial Estate, Ashington, Northumberland, NE63 8UB, England. Tel: 01670-528700, Fax: 01670-520535, Tel: 01670-528700, Fax: 01670-520535, E-mail: sales@contitechbeattie.co.uk , Web Site: www.contitechbeattie.co.uk E-mail: sales@fluid.contitech.co.uk , Web Site: www.contitechbeattie.co.uk
Liquid Mud containing Crude Oil and Grit suction & delivery in offshore applications. Also suitable for Fuel Oil suction & delivery with up to 50% Aromatic Content Suitable for media of up to specific gravity of 1.6 g/cm3. Minimum Reserve Buoyancy of 25% Using OCIMF Standard Calculations For All hose. Note: Finished Hose Dimensions May Be Subject To Change Depending On Specific Gravity of Medium Transported.
DS
Mento Hoses and Couplings Catalogue
2-9. Loading/Oil/Bulk Hoses and Accessories
9
Salamander Floating Potable Water Softwall HosePotable for Potable Water Salamander Water Suction and Delivery Suction and Delivery Premium grade potable water hose for FLOATING HOSE
Construction:
discharge purposes especially for supply of ships and offshore installations
Tube: White UHMWPE (Ultra High Molecular Weight Polyethylene).
Reinforcement: High Tensile Textile Cords with Embedded Steel Helix Wire. Intermediate Cover: Black CR/BR Blend.
POTABLE WATER SOFT WALL Flotation Element: 2 Layers of PE Foam. Cover: Orange CR/BR Blend, Abrasion, Ozone and Hydrocarbon Resistant. Temperature Range: -35°C To +100°C.
Part ID/OD Bend. Burst Weight Part ID/OD Min. Bend. Weight Number radius pressure kg/m Number radius kg/m inch mm Typical Application: Potable Water Transfer. mm Bar inch mm mm Minimum Reserve Buoyancyslang of 25% Using OCIMFontwikkeld Standard Calculations Drinkwater speciaal voor For All hose. Werkdruk 219076 / Betriebsdruck 3 76 x 90 / Working 760 60 1.71 20 Bar pressure PW20HFL-48 3 76 x 148 450 7.70 drinkwater aan boord van schepen en offshore Note: Finished Hose Dimensions May Be Subject To Change Depending On Specific Gravity of Medium Transported. 60 Bar Barstdruk / Berstdruck / Burstpressure 219102 4 102 x 116 1020 60 2.44 installaties PW20HFL-64 4 102 x 175 550 10.80 -30°C + 70°C Temperatuur / Temperatur / Temperature - witte ultra gladde binnenwand overeenkom 219127 5 127 x 143 1270 60 3.60 Branding: PW20HFL-80 5 127C.F.R. x 203 700 13.60 Inwendig / Seele / Liner NR stig FDA richtlijnen Kleur / Farbe / Colour wit/weiss/white - oranje olie en zeewater bestendig buiten rubber • white mirror finish NR tube acc. FDA C.F.R regulations Uitwendig / Decke / Cover CHEMIVIC Working Pressure: 20 Bar - 4 koordinlagen van hoge treksterkte Kleur / Farbe / Colour orange • bright orange cover oil resistant O.D. Working Minimum Burst Min Weight Part Min. No Burst Pressure: Inside Dia 80 Bar Pressure Pressure Bend • 4 ply high tensile textile reinforcement Rad Temperature: –35 °C + 100 °C mm Inch mm Spitzenklasse, mm Bar PSI speziell Bar PSI Kg/M Trinkwasserschlauch der Markering/Markierung/Branding Tube: White UHMWPE (Ultra High PW20HFL-048 76 3 148 20 300 80 1200 450 7.70 zur Versorgun vonOffshoreeinrichtungen und GOODYEAR EMBOSSED / PRAEGUNG Working Pressure: 20 Bar Weight Schiffen102 PW20HFL-064 4 Molecular 175 20 Polyethylene) 300 80 1200 550 10.80 - weisse SeeleTextile enstsprechend Temperature: PW20HFL-080 127 spiegelglatte 5 High 203 20 300with 80 1200 700 13.60 –30°C + 70 °C Reinforcement: Tensile Cords FDA Richtlinien C.F.R. Embedded Steel Helix Wire Tube: NR - orange seewasserbeständige Decke InwenUitwendig Buigstraal Gewicht Vakuum Intermediate Cover: Black CR/BR Blend - 4 Cordeinlagen von hoher Zugfestigkeit Colour: dig A u s s White en Biegeradius Gewicht Vakuum Flotation Element: 2 Layers of PE Foam I n n e n Outside Bendradius Weight Vacuum Cover: Chemivic Cover: Orangewater CR/BR hose Blend, for Abrasion, mm mm Bar mm kg/m Premium grade potable disColour: Orange Ozone and Hydrocarbon Resistant charge purposes especially for supply of 76 90 760 1.71 Branding: CONTITECH EMBOSSED / PRAEGUNG ships and offshorePOTABLE installations Branding: WATER S&D - 20 Bar WP 102 116 1020 2.44 - white mirror finish NR tube acc. FDA C.F.R Lengths: 127 14330,5 - 36,6 m - 61 - 122 m 1270 3.60 Typical Application: Potable Water Transfer regulations Minimum Reserve Buoyancy of 25% - bright orange cover oil resistant Using OCIMF Standard Calculations - 4 ply high tensile reinforcement Jubileetextile Industrial Estate, Ashington, Northumberland, NE63 8UB, England. Tel: 01670-528700, Fax: 01670-520535, E-mail: sales@fluid.contitech.co.uk , Web Site: www.contitechbeattie.co.uk ontiTech Beattie Ltd For All hose.
Lengten/Längen/Lenghts: 30,5 - 36,6m - 61 - 122m
Mento Hoses and Couplings Catalogue
2-10. Loading/Oil/Bulk Hoses and Accessories 10
Potable Water Hardwall Rig Supply Hardwall Wearstrip 40 Bar Premium grade potabable water hose for suction and discharge purposes especially for supply of ships and offshore installations
High Pressure hose for handling drilling muds, crude oil, abrasive materials, glycols and methanol/water mixes
LM-HW 4MPA Wearstrip Part Number
ID/OD inch
mm
Bending radius mm
Weight kg/m
206076 3 76 x 91 for handling 610 drilling 3.45 High Pressure hose muds, crude oil, abrasive materials, glycols 206102 4 102 x 118 800 4.51 and methanol/water mixes -
high abrasion resistant Chemivic tube.
•
white mirror finish tube FDA compliant also resistant to hydrocarbons with compound for use with potable water maximum 30% aromatic contents
•
seawater, drilling muds, glycols and bright orange cover, oil resistant
methanol • 4ply- textile reinforcement embedded EPDM cover withwith excellent UV, ozone stainless steel spiral resistance. Oil resistance and seawater RMA class C - high tensile steel spiral for vacuum Working Pressure: 10 Bar of max 0,8 bar Burst Pressure: Bar factor 3:1, hose with - standard 50 safety diameter 102mm can be used for Temperature: –30°C + 70°C maximum working pressures of 50 Bars Tube: NR - available with built in or swaged high Colour: pressure White couplings - all technical data at room temperature Cover: CR - also available with additional UPE wear Colour: strip vulcanized Orange to hose cover for extra protection against abrasion
Branding:
CONTITECH POTABLE WATER
Lengths:
30 / 60 / 120 m
Vacuum:
0,9 Bar
Part Number
ID/OD
Bend. Burst Weight radius pressure kg/m inch mm / Work.mm Werkdruk / Betriebsdruck pressure Bar 30*/40 Bar Barstdruk / Berstdruck / Burstpressure 217102SB 4 102 x 130 800 Temperatuur / Temperatur / Temperature 217127SB / Seele 5 127 x 160 1020 Inwendig / Liner Kleur / Farbe / Colour 217152SB 6 152 x 184 1250 Uitwendig / Decke / Cover 217203SB 203* x 242 1800 Kleur / Farbe8 / Colour
•
170
9.50see below
120
12.30Chemivic
120 90
- 20°C + 93 °C
zwart/schwarz/bla 13.50 EPDM 23.50 zwart/schwarz/bla
high abrasion resistant Chemivic tube, also resistant to
Markering / Markierung / Branding: hydrocarbons with maximum 30% aromatic contents yellow stripe
seawater, drilling muds, glycols and methanol
•
EPDM cover with excellent UV, ozone and seawater resistance. Oil resistance RMA class C
Inwendig Uitwendig Buigstraal Barstdruk • Innen high tensile steel spiral for vacuum of max 0,8 bar Aussen Biegeradius Berstdruck standard safety factor 3:1 Outside Bendradius Burstpressure Inside
• •
all technical data at room temperature
mm
mm
mm
Bar
kg/
1020 1250 1800
120 120 90
9.5 12. 13. 23.
also available with additional UPE wear strip vulcanized protection8against abrasion 1to 0 2hose cover for 1 3extra 0 00 170
127 160 1 5 2 184. Working Pressure: 30* / 40 Bar 203* 242
Burst Pressure:
90* / 120 Bar
Temperature:
–20°C + 93 °C
Tube:
Chemivic
Colour:
Black
Cover:
EPDM
Colour:
Black
Branding:
Yellow stripe
Lengths:
max. lenghts standard transport dia 4” 61 m dia 5” 30 m dia 6” 30 m dia 8” 20 m
max. lenghts dia 4” dia 5” dia 6” dia 8”
Gew Gew Wei
standard transport 61m 30m 30m 20m
Zie veiligheidsinformatie pagina 1 - Siehe Sicherheitshinweise Seite 1 - See safety information page 1 Technische wijzigingen, Techn. Aenderungen moeglich ohne vorige Ankuendigung, Tech.data subject to change without prior notice
Mento Hoses and Couplings Catalogue
2-11. Loading/Oil/Bulk Hoses and Accessories 11
Versafuel Dock
Dry Cement Softwall
Growing use of agrofuels and their transport have shown limitations of classical tanktruck and dockhoses when being in longterm contact with various types of agrofuels
Heavy duty discharge hose
Part Number
ID/OD inch mm
SOFTWALL 221102 4
Bending Vacuum radius Bar mm
Weight kg/m
102 x 116.6
1020
3.00
6
152 x 170
1520
5.30
HARDWALL 223102 4
102 x 119
600
0.9
4.30
223152
6
152 x 173
900
0.9
7.80
223203
8
203 x 233
1200
0.9
15.40
221152
Part Number
inch
mm
Bending radius mm
Weight kg/m
215102
4
101.6
123.0
4.50
215127
5
127.0
148.9
5.72
215152
6
152.4
174.0
6.76
•
ID/OD
designed for bulk transfer of dry cement
barytes from supply vessels to offshore Werkdruk / Betriebsdruck / Work. pressureand Goodyear developed a complete new range of dockhoses 20 Bar platforms and drilling rigs based on the well proven Rig Supply Soft Wall and Hard Wall Barstdruk / Berstdruck / Burstpressure • Identified by yellow stripe for cement orange spiral 60 and Bar designs, however using specially developed compounds stripe for barytes throughout the hose construction. Temperatuur / Temperatur / Temperature - 30°C + 82 °C These special compounds show a highly improved swelling - and permetation resistance to a wide range of agrofuels Inwendig Seele / Liner Working Pressure: 10 Bar ACN when compared/with standard Nitrile compounds. This results in highly improved layer adhesion, less volume swell, fluid Burst Pressure: 40 Bar Kleur / Farbe / Colour zwart/schwarz/black uptake and „sweating“ through the hose wall. Temperature: –40°C + 93 °C Uitwendig Decke Cover ACN/CR • special liner/ suitable for a /wide range of products Tube: Black Tufsyn® RME, PME, FME up to 100% (B100), Ethanol / (static conductive) Kleurincluding / Farbe / Colour zwart/schwarz/black fuel mixes ranging from E 15 to E 85, diesel fuel, bunker
• •
oil with higher sulfur contents, vegetable oils, aromatic hydrocarbons up to 60% aromatic contents electrically conductive liner R < 106 Ohm specially compounded filler rubbers adding to improved permetation resistance cover with excellent resistance to contact with agrofuels, abrasion resistant high tensile cordplies, for Hardwall type with embedded steel spiral max. flow velocity 13 m / sec
Markering / Markierung / Branding: • dual yellow / green stripe • •
Working Pressure: Burst Pressure: Temperature:
20 Bar 60 Bar –30°C + 82 °C
Cover:
ACN / CR
Inwendig Innen Tube: Inside Colour: mm Colour:
Uitwendig Aussen ACN Outside Black Black
Black Plioflex® with yellow or orange sprial stripe (wrapped finish)
Branding:
CONTITECH
Construction:
Mandrel built
Reinforcement:
4 ply textile plus anti-static wire
Buigstraal Biegeradius Bendradius
Vakuum Vakuum Vacuum
Gewicht Gewicht Weight
mm
Bar
kg/m
mm
Branding:
dual yellow / green stripe
Lengths: SOFTWALL 102
max. lengts standard transport dia 4” 122 m, dia 6” 61 m, dia 8” 30 m other dimensions on request
116.6
Cover:
1020
3.00
g Pressure
Min Burst Pressure
Min Bend Radius
psi
bar
psi
mm
3,000
620
9,000
760
29.9
3,000
620
9,000
910
35.8
Weight
in
kg/m
Inside Diameter
lb/ft
mm
11.20
7.50
6.5
13.00
8.71
9.5 12.7
1
⁄2
19.1
3
Outside Diameter
in
mm
in
1
⁄4
20.0
0.8
3
⁄8 ⁄4
Working Pressure bar 345
Min Burst Pressure
psi 5,000
bar 1,379
Mento Hoses and Couplings Catalogue 24.0
0.9
345
5,000
1,379
psi
Min mm
20,000
110
20,000
150
30.0
1.2
345
5,000
1,379
20,000
250
37.0
1.5
345
5,000
1,379
20,000
330
44.0
1.7
345
5,000
1,379
20,000
375
58.0
2.3
345
5,000
1,379
20,000
460
2-12. Loading/Oil/Bulk Hoses and Accessories 12
25.4
1
31.7
11⁄4
38.1
11⁄ 2
63.0
2.5
345
5,000
1,379
20,000
520
50.8
2
77.0
3.0
345
5,000
1,379
20,000
700
DO16HFR
Fireshield Fuel and Oil Suction ion and Delivery Hose and Delivery Hose
Fire Resistant Firewater Deluge Hose FW3 Seawater Delivery Construction
dded steel helix wire and
ocarbon resistant over layers
Tube
Black CR rubber
Reinforcement
Steel cord layers
Cover
Red smooth CR
Temperature Range –30 °C to +100 °C Fire Rating
Lloyds Approved (OD/1000/499) at 700 °C for 30 minutes
at 700 °C for 30 minutes.
Part
ID/OD
Bending radius mm mm
ntent, suitable for sea-water, mud and Number general o�fshore applications,
inch
g Pressure psi
Min Burst Pressure bar
232
64
928
64
928
232
64
928
232
64
928
232
64
928
232
64
928
232
64
928
232
64
928
1
45
DO16HFR-24
1 1/2
58
Min Bend Radius
DO16HFR-38 mm
psi
232
DO16HFR-16
160
in 6.3
244 9.6 DO16HFR-48 300
11.8
520
20.5
400 15.7 DO16HFR-64
2 3 4 5
DO16HFR-96
6
DO16HFR-128
8
40.6
1,140
44.9
1,250
•
49.2
1.48 2.15 4.78 7.13
79 107 134
7.46
DO16HFR-80 1,030
kg/m
9.56 14.02 22.54
160 244 Weight lb/ft 0.99 1.44 3.20 4.78
Weight kg/m 1.48
Technical Data 2.15
4.78
mm 51
2
400
7.13
76
3
102
4
520
7.46
127 152 203
5.00
156 184
6.41 9.39 15.10
242
Inside Diameter
300
1.030
9.56
1.140
14.02
1.250
22.54
Fuel oil suction and delivery, with up to 50% aromatic content, suitable for sea-water, mud and general oYfshore applications, long lasting in bunkering applications.
Working Pressure:
16 Bar
Burst Pressure:
64 Bar
Temperature:
–25°C + 100 °C
Tube:
Black NBR
Cover:
Black CR abrasion, ozone and hydrocarbon resistant over layers of heat resistant fibre
Fire Rating:
LLOYDS APPROVED (OSG/1000/499) AT 700 °C FOR 30 MINUTES
Reinforcement:
High tensile textile cords with embedded steel helix wire and antistatic wire
in
Outside Diameter mm
Working Pressure
Min Burst Pressure
Min
in
bar
psi
bar
psi
mm
79
3.1
21
305
104
1,500
400
107
4.2
21
305
104
1,500
500
134
5.3
21
305
104
1,500
600
5
156
6.1
21
305
104
1,500
1,030
6
184
7.2
21
305
104
1,500
1,140
8
242
9.5
21
305
104
1,500
1,250
Mento Hoses and Couplings Catalogue
2-13. Loading/Oil/Bulk Hoses and Accessories 13
Colour coding of loading hoses/end fittings Service
Colour Code
Service
Colour Code
Service
Colour Code
Diesel
Brown
Mineral oil
Red
Wax Inhibitor
Black / red
Fresh water / Potable water
Blue
Brine
Red
Sludge
Black / green
Fresh water / Drill water
Blue stripes
Liquid mud
Black
Glycol
Red / yellow
Cement
Yellow
Oil based mud
Brown / white
H2S Scavenger
Red / green
Barite
Orange
Methanol
Black / yellow
FlowSafe
Someone told us that hose transfer was a problem... That was all we needed to know. FlowSafe for secure transfer of fluids between supply boat and rig. •
Contamination due to spillage.
•
Destruction of the hose requiring repair or replacement at considerable cost which could have been avoided.
•
Damage to the supply boat putting it out of commission. Both the vessel and the crew may be exposed to danger.
FlowSafe hose floatation device - the simple s olution With FlowSafe hose floatation device in place around the transfer hose these problems can be avoided. The transfer hose floats in plain sight making discharging much simpler and safer too!
Dimensions: Density: Net budyancy: Weight: Volume: Part No. 360100
Dim 3”
Please refer to drawing 0.11 kgs/dm3 16 kgs 2 kgs 18 l Part No. 360101
Dim 4”
Part No. 360102
Clamp for FlowSafe use 3 ea for each FlowSafe Part No. HS152
Dim 3” - 4" - 5"
Dim 5”
Mento Hoses and Couplings Catalogue
2-14. Loading/Oil/Bulk Hoses and Accessories 14
Mini Floats, BPB-series
Manufactured from ethylene vinyl acetate, Scanmarin Bacel floats are light in weight, have a very high tensile strength, and do not absorb any water. At the same time, the outstanding elasticity of the Bacel material used in their construction results in a float which does not shrink, deform or break. Part Number
OD mm
L mm
Type
Bore mm
Hose Dim.
BPB8000 - 125
230
260
medium
125
4"
BPB8000 - 127
230
260
medium
127
4"
Loading Stations see cap. 11.
Mento Hoses and Couplings Catalogue
2-15. Loading/Oil/Bulk Hoses and Accessories 15
DIXON Holedall IX Coupling System for Offshore applications
Based upon the already highly successful Holedall/Mulconroy Coupling System, which has been manufactured and marketed by our parent company - Dixon Valve & Coupling since 1940 in the United States. This comprehensive range has been specifically designed and developed to service the needs of the Offshore Oil & Gas markets. They conform to all European specifications and quality requirements, including BS EN 1765 and BS EN 14421. Holedall IX Couplings are specified for use in Type Approved Hose Assemblies by Det Norsk Veritas, Lloyds Register of Shipping etc, and are in service with most of the World's major oil companies and Offshore Rig Supply operators. The Holedall coupling system provides outstanding strength, durability and safety, and is a cost-effective method of attaching couplings to hose. Ease of operation, flexibility and economy make the Holedall IX method an unequalled hose assembly system. With Internal Expansion, the system utilises a cold worked draw type progressive swage method which gives a full 360° uninterrupted expansion compression band around the hose, giving superb coupling retention and end load characteristics and full-flow bore reducing turbulence and wear in the hose. Only quality assured, seamless materials are used in the manufacture of Holedall couplings, with materials used for swaging having been checked to establish the yield strength to ensure that brittle fracture does not occur. Certification in accordance with BS EN 10204 3.1.B / DIN 50049 3.1.B is available with all Couplings.
Benefits of Internal Expansion •
Easy, Safe & consistent assembly
•
Excellent sealing & retention between coupling & hose
•
Virtual full-flow bore
•
Reduced turbulence through the hose
•
Reduced risk of bacteria traps in hygienic hose assemblies
•
Full 360° uninterrupted internal expansion
•
Secure – outperforms clamps and bands
•
Tamper Proof – cannot shake loose under vibration
Hose Assemblies with Holedalls Couplings are available from Mento in Stainless Steel and Gold Chromate Plated Carbon Steel with the following end terminations: •
Flanged Fixed or Swivel
•
Threaded API/NPT/BSP
•
Victaulic Groove
•
Plain End
•
Hookie-Hook for Hose Lifters
Ferrules can be supplied colour coded in accordance with the United Kingdom Offshore Operators Association (UKOOA) scheme/NORSOK or to suit specific requirements. “Holedall” – The original Swaged Coupling and still the best
Mento Hoses and Couplings Catalogue
2-16. Loading/Oil/Bulk Hoses and Accessories 16
Full Bore Swage Couplings BSP Couplings Part No. Zinc plated HA0051ZP HA0033ZP HA0031ZP HA0059ZP
Part No. SS316 HA1051 HA1033 HA1031 HA1059
Description Dixon 2" IX stem BSP male Dixon 3" IX stem BSP male Dixon 4" IX stem BSP male Dixon 6" IX stem BSP male
Victaulic Couplings NPT Couplings Part No. Zinc plated HA0799ZP HA0800ZP HA0052ZP HA0034ZP HA0026ZP HA0565ZP HA0060ZP HA0145ZP HA0141ZP HA0142ZP HA0143ZP
Part No. SS316 HA1799 HA1800 HA1052 HA1034 HA1026 HA1565 HA1060 HA1145 HA1141 HA1142 HA1143
Description Dixon 1" IX stem NPT male Dixon 1.1/2" IX stem NPT male Dixon 2" IX stem NPT male Dixon 3" IX stem NPT male Dixon 4" IX stem NPT male Dixon 5" IX stem NPT male Dixon 6" IX stem NPT male Dixon 8" IX stem NPT male Dixon 3" IX stem NPT male Hookie-hook Dixon 4" IX stem NPT male Hookie-hook Dixon 5" IX stem NPT male Hookie-hook
NPT Couplings for WP 27 Bar hose Part No. Zinc plated HA0026-MGM-ZP HA0056-MGM-ZP HA0142-MGM-ZP
Part No. SS316 HA1026-MGM HA1056-MGM HA1142-MGM
Description Dixon 4" IX stem NPT male Dixon 5" IX stem NPT male Dixon 4" IX stem NPT male Hookie-hook HA0143-MGM-ZP HA1143-MGM Dixon 5" IX stem NPT male Hookie-hook
Part No. Zinc plated HA0035ZP HA0030ZP HA0057ZP HA0061ZP
Part No. SS316 HA1035 HA1030 HA1057 HA1061
Description Dixon 3" IX stem Victaulic Dixon 4" IX stem Victaulic Dixon 5" IX stem Victaulic Dixon 6" IX stem Victaulic
Hammer Lug Couplings Part No. Zinc plated HA0932ZP HA0933ZP
Part No. Description SS316 HA1932 Dixon 4" IX stem X fig.206 male sub w/nut HA1933 Dixon 4" IX stem X fig.206 female sub Dixon 5" IX stem X fig.50 male sub w/nut Dixon 5" IX stem X fig.50 female sub
Hammer Lug Couplings for WP 27 Bar hose Part No. Zinc plated HA01030ZP HA01031ZP
Part No. Description SS316 HA1130 Dixon 4" IX stem X fig.206 male sub w/nut HA1131 Dixon 4" IX stem X fig.206 female sub Dixon 5" IX stem X fig.50 male sub w/nut Dixon 5" IX stem X fig.50 female
150# Flange Couplings Part No. Zinc plated HA0134-ASA150ZP HA0136-ASA150ZP HA0137-ASA150ZP HA0566-ASA150ZP HA0139-ASA150ZP HA0140-ASA150ZP HA0396-ASA150ZP HA0150-ASA150ZP HA0152-ASA150ZP HA0153-ASA150ZP HA0567-ASA150ZP HA0155-ASA150ZP HA0156-ASA150ZP HA0397-ASA150ZP
Part No. SS316 HA1134-ASA150 HA1136-ASA150 HA1137-ASA150 HA1154-ASA150 HA1566-ASA150 HA1140-ASA150 HA1396-ASA150 HA1150-ASA150 HA1152-ASA150 HA1153-ASA150 HA1567-ASA150 HA1155-ASA150 HA1156-ASA150 HA1397-ASA150
Description Dixon 2" IX stem X ASA #150 fixed flange Dixon 3" IX stem X ASA #150 fixed flange Dixon 4" IX stem X ASA #150 fixed flange Dixon 5" IX stem X ASA #150 fixed flange Dixon 6 IX stem X ASA #150 fixed flange Dixon 8" IX stem X ASA #150 fixed flange Dixon 10" IX stem X ASA #150 fixed flange Dixon 2" IX stem X ASA #150 swivel flange Dixon 3" IX stem X ASA #150 swivel flange Dixon 4" IX stem X ASA #150 swivel flange Dixon 5" IX stem X ASA #150 swivel flange Dixon 6" IX stem X ASA #150 swivel flange Dixon 8" IX stem X ASA #150 swivel flange Dixon 10" IX stem X ASA #150 swivel flange
150# Flange Couplings for WP 27 Bar hose Part No. Zinc plated HA0137-MGM-ASA150ZP HA0137-MGM-ASA300ZP HA0153-MGM-ASA150ZP HA0153-MGM-ASA300ZP
Part No. SS316 HA1137-MGM-ASA150 HA1137-MGM-ASA300 HA1153-MGM-ASA150 HA1153-MGM-ASA150
Description Dixon 4" IX stem X ASA #150 fixed flange Dixon 4" IX stem X ASA #300 fixed flange Dixon 5" IX stem X ASA #150 swivel flange Dixon 5" IX stem X ASA #300 swivel flange
Mento Hoses and Couplings Catalogue
2-17. Loading/Oil/Bulk Hoses and Accessories 17
Full Bore Swage Couplings Ferrules
Ferrules for WP 27 Bar hose
Part No. Zinc plated HA0062-73-3-BLUE HA0062-76-3-BLUE HA0064-98.5-3-BLUE HA0064-100.5-3-BLUE HA0065-125-3-BLACK HA0065-125-3-BLUE HA0065-125-3-BLUE/WH HA0065-125-3-BROWN HA0065-125-3-GREEN HA0065-125-3-ORANGE HA0065-125-3-RED HA0065-125-3-WHITE HA0065-125-3-YELLOW HA0065-127-3-BLACK HA0065-127-3-BLUE HA0065-127-3-BLUE/WH HA0065-127-3-BROWN HA0065-127-3-GREEN HA0065-127-3-ORANGE HA0065-127-3-RED HA0065-127-3-YELLOW HA0065-129-3-BLUE HA0065-129-3-RED HA0065-132-3-BLUE HA0065-132-3-YELLOW HA0066-154-4-BLUE HA0066-154-4-ORANGE HA0066-154-4-YELLOW HA0066-159-4-BLUE HA0066-159-4-ORANGE HA0066-159-4-YELLOW HA0067-182-4.5-BLUE HA0067-185-4.5-BLUE HA0187-236.5-BLUE HA0187-241-5-RED HA0187-246.5-BLUE HA0367-306-6-BLUE
Description Dixon 2" IX Ferrule F/HW hose OD 65 Dixon 2" IX Ferrule F/HW hose OD 68 Dixon 3" IX Ferrule F/SW hose OD 90 Dixon 3" IX Ferrule F/HW hose OD 92 Dixon 4" IX Ferrule F/SW hose OD 116 Dixon 4" IX Ferrule F/SW hose OD 116 Dixon 4" IX Ferrule F/SW hose OD 116 Dixon 4" IX Ferrule F/SW hose OD 116 Dixon 4" IX Ferrule F/SW hose OD 116 Dixon 4" IX Ferrule F/SW hose OD 116 Dixon 4" IX Ferrule F/SW hose OD 116 Dixon 4" IX Ferrule F/SW hose OD 116 Dixon 4" IX Ferrule F/SW hose OD 116 Dixon 4" IX Ferrule F/HW hose OD 119 Dixon 4" IX Ferrule F/HW hose OD 119 Dixon 4" IX Ferrule F/HW hose OD 119 Dixon 4" IX Ferrule F/HW hose OD 119 Dixon 4" IX Ferrule F/HW hose OD 119 Dixon 4" IX Ferrule F/HW hose OD 119 Dixon 4" IX Ferrule F/HW hose OD 119 Dixon 4" IX Ferrule F/HW hose OD 119 Dixon 4" IX Ferrule F/HW hose OD 121 Dixon 4" IX Ferrule F/HW hose OD 123 Dixon 4" IX Ferrule F/HW hose OD 123 Dixon 4" IX Ferrule F/HW hose OD 123 Dixon 5" IX Ferrule F/SW hose OD 143 Dixon 5" IX Ferrule F/HW hose OD 143 Dixon 5" IX Ferrule F/HW hose OD 143 Dixon 5" IX Ferrule F/HW hose OD 148 Dixon 5" IX Ferrule F/HW hose OD 148 Dixon 5" IX Ferrule F/HW hose OD 148 Dixon 6" IX Ferrule F/SW hose OD 170 Dixon 6" IX Ferrule F/HW hose OD 173 Dixon 8" IX Ferrule F/SW hose OD 223 Dixon 8" IX Ferrule F/SW hose OD 228 Dixon 8" IX Ferrule F/HW hose OD 233 Dixon 10" IX Ferrule F/HW hose OD 290
Part No. Polymer HA1350-44-4-BLUE HA1350-48-4-BLUE HA1801-58-4-BLUE HA1801-61-4-BLUE HA1801-66-4-BLUE HA1802-73-4BLUE HA1802-76-4-BLUE HA1802-78-4-BLUE
Description Dixon 1" IX Ferrule Polymer hose OD 34 Dixon 1" IX Ferrule Polymer hose OD 38 Dixon 1,5" IX Ferrule Polymer hose OD 48 Dixon 1,5" IX Ferrule Polymer hose OD 51 Dixon 1,5" IX Ferrule Polymer hose OD 56 Dixon 2" IX Ferrule Polymer for hose OD 63 Dixon 2" IX Ferrule Polymer hose OD 66 Dixon 2" IX Ferrule Polymer hose OD 68
Part No. SS316 HA1062-73-3 HA1064-100.5-3 HA1065-125-3 HA1065-127-3 HA1066-154-4 HA1066-159-4 HA1067-182-4.5 HA1067-185-4.5 HA1187-246-5
Description Dixon 2" IX Ferrule F/HW hose OD 65 Dixon 3" IX Ferrule F/HW hose OD 92 Dixon 4" IX Ferrule F/SW hose OD 116 Dixon 4" IX Ferrule F/HW hose OD 119 Dixon 5" IX Ferrule F/SW hose OD 143 Dixon 5" IX Ferrule F/HW hose OD 148 Dixon 6" IX Ferrule F/SW hose OD 170 Dixon 6" IX Ferrule F/HW hose OD 173 Dixon 8" IX Ferrule F/HW hose OD 233
Part No. Zinc plated HA0065MGM137-4.5BLUE HA0065MGM137-4.5RED HA0065MGM133-4.5BLAC HA0065MGM133-4.5BLUE HA0065MGM133-4.5BROW HA0065MGM133-4.5ORAN HA0065MGM133-4.5RED HA0065MGM133-4.5YELL HA0066MGM162.5-5BLUE HA0066MGM162.5-5ORAN HA0066MGM162.5-5YELL Part No. SS316 HA1065-MGM-133-4.5 HA1065-MGM-137-4.5 HA1066-MGM-162.5-5
Description Dixon 4" IX Ferrule F/HW Hose OD 125 Dixon 4" IX Ferrule F/HW Hose OD 125 Dixon 4" IX Ferrule F/SW Hose OD 121 Dixon 4" IX Ferrule F/SW Hose OD 121 Dixon 4" IX Ferrule F/SW Hose OD 121 Dixon 4" IX Ferrule F/SW Hose OD 121 Dixon 4" IX Ferrule F/SW Hose OD 121 Dixon 4" IX Ferrule F/SW Hose OD 121 Dixon 5" IX Ferrule Hose OD 149/150 Dixon 5" IX Ferrule Hose OD 149/150 Dixon 5" IX Ferrule Hose OD 149/150
Description Dixon 4" IX Ferrule F/SW Hose OD 121 SS Dixon 4" IX Ferrule F/SW Hose OD 125 SS Dixon 5" IX Ferrule Hose OD 149/150 SS
Couplings w/ferrules for WP 40 Bar hose Part No. Zinc plated HA0911ZP HA0045ZP HA0701ZP HA0702ZP HA0795ZP HA0798ZP
Description Dixon 4" IX stem NPT male w/ferrule Dixon 6" IX stem NPT male w/ferrule Dixon 4" IX stem X ASA #300 fixed flange w/ferrule Dixon 4" IX stem X ASA #300 swivel flange w/ferrule Dixon 6" IX stem X ASA #300 fixed flange w/ferrule Dixon 6" IX stem X ASA #300 swivel flange w/ferrule
Mento Hoses and Couplings Catalogue
2-18. Loading/Oil/Bulk Hoses and Accessories 18
Technical specification Sizes:
DN 20 - 3/4", to DN 150 - 6"
Connections:
Thread BSP or NPT
Flanges:
DIN, ASA, TW, TTMA. EN 1092-1:2001 Type E:Spigot.
Material:
Aluminium, Brass/Gunmetal, Stainless Steel AISI 316, Hastelloy and PEEK, other on request.
Sealing material:
Standard FPM(Viton(R)), EPDM, HNBR, NBR (Nitril), Kalrez(R), CHEMRAZ(R), and FFPM, other on request.
Flat seal for female BSP-threads:
PUR / Polyurethan or PTFE (Teflon(R)).
Working pressue:
Aluminium: PN 16 Brass / Gunmetal: PN 16 Stainless Steel: PN 25
Test pressure:
WP + 50%
Minimum burst pressure:
safety factor 5:1
MENTO ARE AUTHORIZED TO PERFORM SERVICE AND MAINTENANCE ON THE COUPLINGS.
Mento Hoses and Couplings Catalogue
2-19. Loading/Oil/Bulk Hoses and Accessories 19
DDC Hose unit Thread NPT (ANSI B1.20.3)
Part Number
Inch / DN
S102A1101
1”/25
56
3/4“
0,5
Aluminium
S102A2201
1”/25
56
3/4“
1,4
Brass
S102A4401
1”/25
56
3/4“
1,3
Stainless Steel
S104A1101
1”
56
1”
0,5
Aluminium
S104A2201
1”/25
56
1”
1,4
Brass
S104A4401
1”/25
56
1”
1,3
Stainless Steel
S208A1101
2”/50
70
1 1/2”
1,2
Aluminium
S208A2201
2”/50
70
1 1/2”
2,6
Brass
S208A4401
2”/50
70
1 1/2”
2,5
Stainless Steel
S211A1101
2”
70
2”
1,1
Aluminium
S211A2201
2”/50
70
2”
2,4
Brass
S211A4401
2”/50
70
2”
2,3
Stainless Steel
S313B1101 2 1/2”/65
105
2 1/2”
3,7
Aluminium
S313B2201 2 1/2”/65
105
2 1/2”
7,3
Gun Metal
S313B4401 2 1/2”/65
105
2 1/2”
7,1
Stainless Steel
105
3”
3,7
Aluminium
S315B2201 2 1/2”/65
105
3”
7,2
Gun Metal
S315B4401 2 1/2”/65
105
3”
7,0
Stainless Steel
S315B1101
2 1/2”
Socket Conn. Weight Material Ø mm NPT kg
S415B1101
3”/80
119
3”
4,2
Aluminium
S415B2201
3”/80
119
3”
8,5
Gun Metal
S415B4401
3”/80
119
3”
8,1
Stainless Steel
S517B1101
4”/100
164
4”
7,8
Aluminium
S517B2201
4”/100
164
4”
18,7
Gun Metal
S517B4401
4”/100
164
4”
16,8
Stainless Steel
* S517B4401M 4”/100
164
4”
16,8
Stainless Steel Aluminium
® DDCouplings Dry Disconnect Couplings * ®
DDCouplings Dry Disconnect Couplings
S611B1101
6”
238
6”
26,5
S611B4401
6”
238
6”
45
Stainless Steel
Also available with BSP thread. ANSI Flange. DIN Flange. * With round handle.
2-20. Loading/Oil/Bulk Hoses and Accessories 20
Mento Hoses and Couplings Catalogue
DDC Dust plug for Hose unit
Part Inch Socket Connection Number / DN Ø mm NPT
T102A1101 1”/25
T102A2201 1”/25
Inch / DN
P100A2201
1”/25
56
60
Composite
P100A1101
1”/25
56
120
Aluminium
P100A4401
1”/25
56
320
Stainless Steel
56
3/4”
0,3
Aluminium
P200A2201
2”/50
70
120
Composite
56
3/4”
0,7
Brass
P200A1101
2”/50
70
240
Aluminium
2”/50
1”/25
56
3/4”
0,7
Stainless Steel
P200A4401
70
640
Stainless Steel
T104A1101
1”/25
56
1”
0,3
Aluminium
P300A2201 2 1/2”/65
105
265
Composite
T104A2201
1”/25
56
1”
0,7
Gun Metal
P300A1101 2 1/2”/65
105
520
Aluminium
T104A4401
1”/25
56
1”
0,7
Stainless Steel
P300A4401 2 1/2”/65
105
1400
Stainless Steel
T208A1101
2”/50
70
1 1/2”
0,5
Aluminium
P400A2201
3”/80
119
330
Composite
T208A2201
2”/50
70
1 1/2”
1,3
Gun Metal
P400A1101
3”/80
119
620
Aluminium
T208A4401
2”/50
70
1 1/2”
1,3
Stainless Steel
P400A4401
3”/80
119
1600
Stainless Steel
T211A1101
2”/50
70
2”
0,4
Aluminium
P500B2201
4”/100
164
440
Composite
T211A2201
2”/50
70
2”
1,1
Gun Metal
P500B1101
4”/100
164
880
Aluminium
P500B4401
4”/100
164
2300
Stainless Steel
70
T313D1101 2 1/2”/65
105
2”/50
T211A4401
Weight Material kg
Socket Weight Material Ø mm gr
T102A4401
2”
1,0
Stainless Steel
2 1/2” 0,9
Aluminium
T313D2201 2 1/2”/65
P600A1101 6” 238 105 2 1/2” 3,9 Gun Metal
T313B4401 2 1/2”/65
105
T315B1101 2
”/65
105
1/2
Part Number
DDC Tank unit thread NPT (ANSI B1.20.3)
2 1/2”
Dry Disconnect Couplings
T315B4401 2 1/2”/65
105
3”
3,7 Steel Stainless
3”/80
119
3”
1,3
Aluminium
T415D2201
3”/80
119
3”
3,6
Gun Metal
T415B4401
3”/80
119
3”
3,6
Stainless Steel
4”/100
164
T517D2201
4”/100
164
T517B4401
4”/100
164
T6111B1101
6”
238
T6111B4401
6”
238
4”
2,3
Aluminium
4”
7,5
Gun Metal
4”
6,7
Stainless Steel
DDC Dust cap for Tank unit Part Number
Inch / DN
Socket Weight Material Ø mm gr
C100A2201 6” 7,2 Aluminium
1”/25
56
130
Composite
C100A1101
1”/25
56
220
Aluminium
C100A4401
1”/25
56
590
Stainless Steel
6” 17,6
Stainless Steel
Also available with BSP thread. ANSI Flange. DIN Flange.
Spare parts
4” Hose Unit (SS316)
O-ring kit
O-S5-01 (Viton)
Rep. kit
S-S5-44
C200E2202
2”/50
70
180
Composite
C200A1101
2”/50
70
365
Aluminium
C200A4401
2”/50
70
1020
Stainless Steel
C300E2202 2 1/2”/65
105
350
Composite
C300B1101 2 1/2”/65
105
690
Aluminium
105
1860
Stainless Steel
C300A4401 2 1/2”/65 C400E2202
3”/80
119
375
Composite
C400B1101
3”/80
119
730
Aluminium
C400B4401 S-H-S5-44-M1 (incl. bolts) C500E2202
3”/80
119
1970
Stainless Steel
4”/100
164
500
Composite
C500B1101
4”/100
164
900
Aluminium
C500B4401
4”/100
164
2400
Stainless Steel
C600A1101
6”
234
Handle (standard) S-H-S5-44-S1 (incl. bolts)
Handle (round)
®
Dry Disconnect Couplings
3,2 Gun Metal
3”
T415D1101
T517A1101
DDCouplings
Stainless Steel
0,9 Aluminium 3”
®
T315B2201 DDCouplings 2 1/2”/65 105
3,9
Aluminium
DDCouplings Dry Disconnect Couplings
®
Aluminium
Mento Hoses and Couplings Catalogue
21 124 2-21. Loading/Oil/Bulk Hoses and Accessories
Break-away coupling - Advantages 4" NPT
Notice. This drawing contains poprietary information and shall not be used or reproduced or its contents disclosed in whole or in part, without the prior written concent of the Mann Teknik AB
NO.
ALSO AVAILABLE IN NON-CLOSURE / UN-VALVED
Revision comprises
Date
MENTO ARE AUTHORIZED TO PERFORM SERVICE AND MAINTENANCE ON THE COUPLINGS.
4" NPT
This coupling incorporates the same internal mechanism as our industrial couplings, but has additional external features that provide increased resistance to torsional and bending moment forces which may be applied to the coupling, preventing premature activation in the unpredictable marine environment.
164
Marine version of SBCouplings are designed specially to be installed within a hose string, where the coupling would have a length of hose attached to both sides.
Sign.
Mento Hoses and Couplings Catalogue
2-22. Loading/Oil/Bulk Hoses and Accessories 22
Examples of Connection combinations BSP Female thread / BSP Female thread
NPT Female thread / NPT Female thread
NPT male thread / NPT male thread also available with BSP
NPT Female thread / NPT Male thread also available with BSP
Victaulic / Victaulic
NPT Female thread / Victaulic
Flange / Flange
Flange / Thread (BSP/NPT-Female/Male and Victaulic
Other combinations of connections on request
Type
Part No. Industri
Part No. Marine
4” – 4” NPT Female. Valved
N517D4401
N517KO4401-xx xx= Breaking Force in kN
4" – 4" NPT Female. Unvalved
N517D4001
N517KO4401-xx xx= Breaking Force in kN
5" – 5" NPT Female. Valved
NV124D4401
N517KO4401-xx xx= Breaking Force in kN
5" – 5" NPT Female. Unvalved
NV124D4001
N517KO4401-xx xx= Breaking Force in kN
Recommended Breaking Force for 4" hose with Burst Pressure of 60 bar: 36 kN Recommended Breaking Force for 4" hose with Burst Pressure of 108 bar: 65 kN Recommended Breaking Force for 5" hose with Burst Pressure of 60 bar: 56 kN Recommended Breaking Force for 5" hose with Burst Pressure of 108 bar: 101 kN Rep. kit
Part No. O-ring kit (Viton)
Part No. Breaking Bolts
4” Industri
O-N5D-01
S-N5D-44 (52 kN)
4” Marine
O-N5M-01
S-N5M-44 (52 kN) / S-N5M-xx. xx = Breaking Force in kN
5” Industri
O-NVD-01
S-NVD-44 (81 kN)
5” Marine
O-NVM-01
S-NVM-44 (81 kN) / S-NVM-xx. xx = Breaking Force in kN
Full range of sizes, materials, seals and connections
Full range of sizes, materials, seals and connections
NOTE Please ask us for your special application.
Mento Hoses and Couplings MinimalCatalogue maintenance requirements
Minimal maintenance requirements
2-23. Loading/Oil/Bulk Hoses and Accessories 23
Applications Safety Swivel function - allows the hose to relax to it´s natu- hose reels ship-to-shore • Offshore ral rest position whilst allowing freedom of movement • Oil platform loading rigs without imparting torque stress at the point of• Marine con- and industrial loading arms • Hoses for road and rail tanker nection - Torque stress is the largest single cause • Chemical of Composite, PTFE and Stainless Steel convoluted and petrochemical liquids and liquefied gases hose failure. No part of this leaflet may be reproduced in any form or by any means without permission in writing from the publisher.
Hose Swivels - single ball bearing
NOTE Unsuitable for high bending moments. Heavy Duty Swivels should be used in these applications.
Safety Swivel function - allows the hose to relax to it´s natural rest position whilst allowing freedom of movement without imparting torque stress at the point of connection - Torque stress is the largest single cause of Composite, PTFE and Stainless Steel convoluted hose failure.
Heavy Duty Swivels - double ball race
Economical Cost effective solution to prolong lifetime of hoselines.
Standard Hose Swivel
Economical Cost effective solution to prolong lifetime of hoselines.
Heavy in Stainless Heavy dutyduty SwivelSwivel in Stainless Steel
Mann Tek standard Hose Swivel Available with parallel BSP and tapered NPT threads.
Standard Flat seal (for BSP threads and body in Stainless Steel) in PTFE (Teflon®). Other on request!
No part of this leaflet may be reproduced in any form or by any means without permission in writing from the publisher.
• Hose assemblies • Filling machines • Handling of refuelling of equipment e.t.c.
Available with parallel BSP,and tapered NPT threads. or flanges.
Standard Flat seal (for BSP threads and body in Stainless Steel) in PTFE (Teflon®). Other on request!
Aluminium, Brass ose Swivels - single ball bearing Swivels Hose Swivels - single ball single bearing ball bearing or Stainless Steel. HoseHose Swivels - single ball-bearing Other on request! Swivel body in
Steel
Swivel body in Stainless Steel. Other on request!
Ballbearings in Stainless Steel
HeavyDuty DutySwivels Swivels- -double doubleball ballrace race Heavy in FPM (Viton®). ns of sizes, and materials Standard O-rings Ballbearings in binations Combinations ofonconnections sizes, of connections sizes, connections and materials and materials Other request! in FPM (Viton®). ons of sizes, connections and materials Stainless Steel Duty Swivels - double ball race Other on Heavy request! Sizes Hose Swivels - single ball bearingCombinations Combinationsofofsizes, sizes, connections andmaterials materials connections and Heavy Duty Swivels - double ball rac Swivel sizes Wavy washer in Standard O-rings
Swivel sizes Swivel sizes
Sizes Combinations of sizes, connectionsStandard and seal materials in Sizes 4”3”Available with parallel 4” PTFE (Teflon®). BSP and tapered Swivel sizes Other on request! Combinations of sizes, connections and materials Sizes Swivel sizes NPT threads. Heavy Duty Swivels - double ball Sizes " 10"race " " " " " " 6”6” 8"8" 10" ections Connections Combinations of sizes, connections and materials Swivel sizes " Sizes Swivels sle / Male1)) Swivel sizes Swivels " " " " 6” 8" 10" Flanges 1)) 1)) Connections ds (Female Threads / Male (Female / Male Flanges Flanges Swivel sizes Sizes Applications Applications Combinations of sizes, connections and materials 3/4” 1” 1 1/4” 1 1/2” PN 25/402” 1/2” 3” Connections 4” 1)) ale / Male Flanges 1092 PN 10/16, (Type A,PN B,2E, F ) A, ) B,25/40 ) ) A, B, E, F ) ) ) " " " " 6” 8" 8) BSP (ISO 8) DIN Flange (ISO DIN Flange (ISO DIN 1092 Flange PN 10/16, (ISO PN 1092 25/40 10/16, (Type PN E, F (Type 1))1 ) (Female / Male Flanges Connections sizes Threads (Female Male Flanges • HoseASA assemblies •Threads Offshore hose /reels ship-to-shore DINFlange Flange(ASME/ANSI (ISOSwivel 1092 PN 10/16, PN 25/40 (Type A, B, E, F ) ) Sizes 0.1 16.5) ME/ANSI 1.20.1 (ASME/ANSI 1.20.1 ASA 16.5) (ASME/ANSI 16.5) ) ) ) Connections BSP (ISO 8) DIN Flange (ISO 1092 PN 10/16, PN 25/40 (Type A, B, E, F ) 3/4”NPT 1” 1 1/4” ASA1Flange 1/2” (ASME/ANSI 2” Flange 2 1/2” 3” 4” BSP 1 DIN Flange (ISO 1092 PN 10/16, PN 25/40 (Type A, B, E, F ) (ISO 8)(Female Connections Threads / Male Flanges .20.1 ASA Flange (ASME/ANSI 16.5) TW-Flange (DIN 8 9) (DINTW-Flange Swivel sizes • Filling machines • Oil platform loading rigs) N 10226) BSPT (EN 10226) TW-Flange 8 9) (DIN 8 9) Available with parallel
Swivel sizes BSP and tapered 11”3/4” 1/4” 1 1” 1/2” 2”- single 21/2” 1/2”ball2 bearing 3” 4” Hose Swivels Combinations of1sizes, connections and materials 1 1/4” 11/2” 1/4” 12” 1/2” 2” 23”1/2” NPT threads.
1”
1 1/4”
1 1/2”
2”
2 1/2”
Stainless Steel
3”
4”
Swivel Joints
Swivel Joints
Threads (Female Heavy / Male1))
NPT (ASME/ANSI 1.20.1 NPT (ASME/ANSI Duty Swivels - double ball race BSP (ISO 8) 1.20.1 Flanges
TW-Flange (DIN 8 9) Heavy Duty Swivels - double ballThreads T.T.M.A 1)) " (Female " " Flanges " 6” 8" race / Male(DIN Connections ACME • Handling T.T.M.A of equipment T.T.M.A e.t.c. (EN 10226) TW-Flange of refuelling •BSPT and industrial loading arms ) Heavy Duty Swivels double ball race TW-Flange (EN ASA Flange(DIN 150 8 9) psi 8 9) / 300 psi (ASME/ANSI 16.5) NPT (ASME/ANSI 1.20.1 BSP (ISO 8) DIN Flange (ISO 1092 PN 10/16, PN 25/40 (Type A,BSPT B, E, Marine F )10226) T.T.M.A BSP (ISO 8) DIN Flange (ISO 1092 PN 10/16, PN 25/40 (Type A Weld end 1)) ACME T.T.M.A Threads (Female / Male Flanges T.T.M.A ACME TW-Flange (DIN 8 9) BSPT (EN 10226) Connections NPT (ASME/ANSI 1.20.1 ASA Flange (ASME/ANSI 16.5) • Hoses for road and rail tanker1.20.1 NPT (ASME/ANSI ASA Flange 150 psi / 300 psi (ASME/ANSI 16.5) )(ISO of sizes, connections Victaulic (ISO 8)female DIN Flange PN PN 25/40 (Type A, B, E, materials F ) ) Victaulic Se1092 page14 for illustrations ofand different fBSP male threads possible. T.T.M.A / Male1)) ACME )10/16, 1) and BSPT (EN Combinations 10226) TW-Flange (DIN 8 9) Se page14 for ) illustrations Se page14 of fordifferent illustrations ofmaterials different BSPT Threads (Female Flanges (DIN 8 9) mbinations Any ofcombinations male and female ofismale threads and female is possible. threads is possible. Combinations of sizes, connections and (EN 10226) TW-Flange types of DIN-flanges ) Combinations of sizes, connections and materials • Chemical and petrochemical liquids and liquefied gases NPT (ASME/ANSI 1.20.1 threads is possible. ASA FlangeT.T.M.A (ASME/ANSI 16.5) Se page14 for illustrations of different of male andNOTE female Victaulic types of DIN-flanges types of DIN-flanges ACME Weld end DIN Flange (ISO 1092 PN 10/16, PN 25/40 (Type A, B, E BSP (ISO 8) Weld end
Sizes
ASA Flange 150 / 300 (ASME/ANSI 16.5) ASA Flange 150 psipsi /PN 300 psipsi (ASME/ANSI 16.5) DIN Flange (ISO 1092 10/16, PN 25/40 (Type A, B, E, F ) )
BSPT (ENWeld 10226) TW-Flange (DIN types 8 9) of DIN-flanges Sizes end NPT (ASME/ANSI 1.20.1 dials Seals end 1)Weld Sizes 1) Any Any combinations male and female threads possible. Materials Seals and Unsuitable forSeals high bending Heavysizes Duty Swivels Victaulic combinations of of male and female threads is is possible. ACME and T.T.M.A torque. Swivel BSPT (EN 10226) d Seals ) Se 1) Any combinations of male and female threads is possible. 1) Any Swivel sizes page14 for illustrations of different combinations of male and female threads is possible. Weld end Standard Materials and standard Seals Weld end should be used in these applications. Swivel sizes " " " " 6” 8" 10" ACME Materials and Seals Standard Materials Standard and Materials standard and Seals standard Seals " Materials types " " " of DIN-flanges 6” and Seals 8" 10"
ACME
Standard Materials and standard Seals ) " "
T.T.M.A
ASA Flange 150 psi / 300 psi (ASME/ANSI 16.5) ) )
page illustrations different SeSe page 1414 forfor illustrations of of different of different
8 9) types of DIN-flanges )TW-Flange types of(DIN DIN-flanges Se page 14 for illustrations T.T.M.A types of DIN-flanges
terial Material Operation temp O-ring Flat Sealof different Materials and Seals SeOperation page14 for illustrations Any combinations of Standard male and female threads is possible. Se page 14 for illustra Any combinations of male and female threads is possible. nent Component Material Material Material Standard Material Operation Standard temp O-ring temp O-ring Flat Seal Flat Seal Materials and Seals Standard Materialsand andstandard standardSeals Seals Connections types of DIN-flanges Standard Materials types of DIN-flanges Weld end Material EN Material Standard Operation temp O-ring 755 - AW-6262-T6 Connections PUR Flat Seal Standard Materials and standard Seals EN 755 AW-6262-T6 EN 755 AW-6262-T6 Materials and Seals PUR PUR Connections ) Component Material Material1) Material Material Standard Operation temp Seal ) Flat Seal 1) minium Materials and Seals Standard Materials and standard Seals Component Standard Operation temp Seal Flat Threads (Female / Male Flanges Aluminium Aluminium Se page 14Seal for illustration Any combinations of male and female threads is possible. 755 - AW-6262-T6 ENEN 1706-AC-42100-T6 PURFlanges )) (Vulkollan®) (Vulkollan®) (Vulkollan®) Component Material Material Standard Operation temp Seal FlatofSeal EN(ISO 1706-AC-42100-T6 EN 1706-AC-42100-T6 Threads (Female Male11)(ISO uminiumComponent types DIN-flanges 755 - AW-6262-T6 BSP 8) DIN Flange 1092 PN 10/16, A, B, E, F ) ) Standard Materials and standard Seals Material Material Standard Operation O-ringPN 25/40 (Type Flat Seal PUR Threads (Female // Male )temp Flanges ENEN 755 - AW-6262-T6 Standard Materials and standard Seals PUR (Vulkollan®) 1706-AC-42100-T6 ENEN 12164 - CW614N ) Aluminium PUR Materials Seals FPM/KFM DIN Flange (ISO 109216.5) PN 10/16,Aluminium PN-25/40 (Type A, 755 B, race E, F ) and ) BSP (ISO 8) oC oCW614N EN(ASME/ANSI 12164- -single CW614N EN 12164 - 8) EN PUR PUR PUR FPM/KFM FPM/KFM (Vulkollan®) double ball Combinations ball bearing NPT 1.20.1 ASA 150 psi 300 Flange psi (ASME/ANSI sComponent -40 to(ISO C o oC oC to oC/ DIN (ISO Combinations 1092 PN 10/16, PN 25/40 (Type A,EN B, 1706-AC-42100-T6 E,-FAW-6262-T6 ) (Vulkollan®) PTFE EN 1706-AC-42100-T6 ENBSP 755 -250 AW-6262-T6 Component Material Material Standard Operation temp Seal PUR Aluminium Brass Brass Material Material Standard Operation temp O-ring Flat Seal -40 C to 250 -40Flange 250 Body 12164 - CW614N oCoC oCoC PTFE (Vulkollan®) ENEN 1982 - CB491K-GS (Viton®) PUR -100 to 250 FPM/KFM Body ASA Flange 150 psi / 300 psi (ASME/ANSI 16.5) NPT (ASME/ANSI (Vulkollan®) -100 to 250 oC oC 1.20.1 EN 1706-AC-42100-T6 Body (Vulkollan®) (Vulkollan®) ENAluminium 1982 - CB491K-GS EN 1982 - CB491K-GS (Viton®) PTFE Materials and standard Seals 7 (Viton®) 6(DIN 8 9) BSPT (EN 10226) TW-Flange 8 ass -40 to 250 EN 10272 - 1.4404+ATStandard (Teflon®) oC to oC NPT (ASME/ANSI 1.20.1 ASA Flange 150 psi / 300 psi (ASME/ANSI 16.5) Stainless PTFE (Vulkollan®) EN 1706-AC-42100-T6 EN 10272 1.4404+AT (Teflon®) 7 6 7 6 8 8 Stainless PTFE -100 250 Body EN 755 AW-6262-T6 EN 755 -Swivels AW-6262-T6 We manufacture in different sizes, We manufacture Swivels in different sizes, (Vulkollan®) PUR 1982 -1.4404+AT CB491K-GS (Viton®) ENEN 10272 TW-Flange (DIN 8 9) BSPT (EN 10226) nless Stainless PTFE EN 10272 1.4404+AT (Teflon®) Stainless Aluminium Aluminium ENStainless 10272 - 1.4404+AT EN 10272 - 10226) 1.4404+AT T.T.M.A8 7 6 ACME E Steel Component Material Material Standard Operation PTFE temp Seal Steel E (Teflon®) PTFE 10213 BSPT (EN TW-Flange (DIN 8 9) EN 12164 - CW614N (Teflon®) ENEN 10213 - 1.4409+AT PUR PTFE E - 1.4409+AT EN 1706-AC-42100-T6 (Vulkollan®) FPM/KFM EN 1706-AC-42100-T6 o (Teflon®) PTFE 140 10272 - 1.4404+AT connections and materials on request! o and materials on request! l Brass ENEN 10213 - 1.4409+AT Steel ainless T.T.M.A(Teflon®)connections ACME Body EN 10213 - 1.4409+AT 140 140 -100oC to(Teflon®) 250oC Body Victaulic E Steel (Teflon®) EN 755 - AW-6262-T6 ENSteel 10213 - 1.4409+AT EN 10213 - 1.4409+AT-40 C to 250 C PTFE (Vulkollan®) ACME T.T.M.A 1982 - CB491K-GS (Viton®) EN 12164 - EN CW614N EN 10272 1.4404+AT (Teflon®) PUR FPM/KFM Stainless Working Pressure: 150 psi (10 bar)-1800 psi (125 bar)PU Aluminium 14 o o 0 eel (Teflon®) WorkingEN Pressure: 150 psi (10 bar)-1800 psi (125 bar) EN Brass 10213 - 1.4409+AT Victaulic -40 C to 250 C Body (Vu E E 1706-AC-42100-T6 PTFE Working Pressure: 150 psi Pressure: (10 bar) - 300 bar) Working Pressure: psi (10 bar)-1800 psiEN (125 bar) Pressure: 150 psi (10 bar)-1800 bar) WeldStainless end ENVictaulic 10272 - 1.4404+AT (10 psi bar)(20 -(Viton®) 300 psi bar) (Vulkollan®) oC to 250psi oC (125 EN 1982Working - CB491K-GS PTFE SteelWorking 10213 - 1.4409+AT E -100 E Working Pressure: Working (10 Pressure: bar)(20 - 300 (10 psi (20 bar)bar) - 300 psi (20 bar) 150Body 1) 8" Victaulic
6
No part of this leaflet may be reproduced in any form or by any means without permission in writing from the publisher.
7
6”
No part of this leaflet may be reproduced in any form or by any means without permission in writing from the publisher. Q203
Head Width 130
Head Width 130
8
No part of this leaflet may be reproduced in any form or by any means without permission in writing from the publisher. Nopart part of of this this leaflet may any means without permission in writing fromfrom the publisher. No may be be reproduced reproducedininany anyform formororbyby any means without permission in writing the publisher.
"
Q
NPT (ANSI B 1.20.1) 4" NPT (ANSI B4"1.20.1)
Q
Q
"
Head Width 130
Q
4" NPT (ANSI B 1.20.1) 4" NPT (ANSI B 1.20.1)
(ANSI B 1.20.1) 4" NPTwithout No part of this leaflet may be not reproduced in any or by any means permission in writing from the publisher. or form its contents be used or reproduced and shall
)
10"
8
8
)
3
3
3
8
0
7
8
6
41
Q14
Head Width 130
Q14
Head Width 130
4" NPT (ANSI B 1.20.1)
EN 10272 - 1.4404+AT (Teflon®) Stainless PTF Weld end f combinations EN 10213 - 1.4409+AT EN 10272 -Working 1.4404+AT Pressure: (10 bar) - 300 psi (20 bar) ) 1) AnySteel Illustrations ofcombinations combinations Stainless PTFE ations Illustrations of combinations of combinations Weld end Se page Illustrations 14(Teflon®) for illustrations of of different combinations of male and female threads is possible. Working Pressure: 150 psi (10 bar)-180 Steel (Te EN 10213 - 1.4409+AT Illustrations of combinations of combinations Swivels in different sizes, connections and materials on request! Q 1) Any combinations Steel (Teflon®) EN 10213 1.4409+AT types of DIN-flanges 2 Se page 14 o us a ons o d e en of male and female threads is possible. We manufacture Swivels in different sizes, connections and materials on request! 2 ufacture We manufacture Swivels in different Swivels1)sizes, in different connections sizes, connections andPressure: materials and on materials request! on )bar) request! Q Q2 0(10 We Swivels in different sizes, connections and materials on request! Working bar) - 2300 psimanufacture (20 E
3
8
E
Head Width 41
1
4
Q
Head Width 41
5
2
3
Notice. This drawing contains poprietary information and shall not be used or reproduced or its contents
3
the prior withoutinformation in wholecontains or in part, disclosed poprietary This drawing Notice. AB contents Mann Teknik of or thereproduced concent or its be used shall not andwritten contains This drawing Notice. the prior information withoutpoprietary in whole or in part, disclosed or its contents reproduced be used shall not andconcent AB Teknik Mann or of the written disclosed in whole or in part, without the prior written concent of the Mann Teknik AB
2
Head Width 41
Head Width 41
5
4
Q158
Q158
3
3/4" NPT (ANSI B 1.20.1)
4
1
Head Width 41
3
2
62
Notice. This drawing contains poprietary information and shall not be used or reproduced or its contents Head Width disclosed in whole or in part, without the prior written concent of the Mann Teknik AB
3/4" NPT (ANSI B 1.20.1)3/4" NPT (ANSI B 1.20.1)
2
5
Notice. This drawing contains poprietary information and shall not be used or reproduced or its contents disclosed in whole or in part, without the prior written concent of the Mann Teknik AB
and shall not be used or reproduced or its contents
Notice. This drawing contains poprietary information whole or in part, without the prior in contents disclosed or its and shall not be used or reproduced concent writtenthe prior of the Mann Teknik AB disclosed in whole or in part, without written concent of the Mann Teknik AB
Q158 Notice. This drawing contains poprietary information
3/4" NPT (ANSI B 1.20.1)
3/4" NPT (ANSI B 1.20.1)
3/4" NPT (ANSI B 1.20.1) Head Width 130
Notice. This drawing contains poprietary information and shall not be used or reproduced or its contents Notice. This drawing contains poprietary information in whole or in part, without the prior contents and shall not be used or reproduced or itsdisclosed disclosed in whole or in Notice. prior the drawing part, without Teknik AB the Manninformation concent of written contains poprietary This written concent of the Mann Teknik AB information Thisnot drawing Notice. or its contents be contains reproduced used orpoprietary shall and and shall not be used or reproduced or its contents in whole or in part, without the prior disclosed disclosed in whole or in part, without the prior of Mann Mann AB Teknik AB the Teknik concent written of the written concent
3/4" NPT (ANSI B 1.20.1)
3/4" NPT (ANSI B 1.20.1)
Notice. This drawing contains poprietary information and shall not be used or reproduced or its contents disclosed in whole or in part, without the prior written concent of the Mann Teknik AB
3/4" NPT (ANSI B 1.20.1)
4" NPT (ANSI B 1.20.1)
Notice. This drawing contains poprietary information and shall not be used or reproduced or its contents disclosed in whole or in part, without the prior written concent of the Mann Teknik AB Notice. This drawing contains poprietary information and shall not be used or reproduced or its contents disclosed in whole or in part, without the prior written concent of the Mann Teknik AB
5
1
4
1
1
5
5
2
2
4 4
E
402W-1
1
E
E
3" NPT Female / 3" ANSI Drawing No. 1 / 1Rev. 150 PSI Drawing No. 3" NPT Female / 3" ANSI 150 Rev. D15611402W-1 3" NPT Female / 3" ANSI D15611402W-1 150 PSI PSI D15611
62
4
Appr by
62
E
Sign.
112
3
8
Date
112
No part of this leaflet may be reproduced in any form or by any means permission in writing from the publisher. information poprietaryThis drawing containswithout Notice. This information drawing contains poprietary Notice.
20 20page 14 illustrations ofOther different Any combinations of maleOne and female threadsside is possible. One side Other side One side Other side sideonOther Onemanufacture sideSeypes Oneinside side One side Other side We different sizes, connections and materials on request! EOther Materials and Seals o side DSwivels NforEflanges e Swivels in different connections and materials Q2 E of combinations Working Pressure: 150 psi (10 bar)-1800 p Illustrations ofsizes, combinations 20side Working Pressure: (10 bar) -request! 300 psi (20 bar) One side types of DIN-flanges her side One side Other side One sideOther Other One side Other Other side Other sideIllustrations One side Other Other side One One side Other Other side One Materials and Seals One Other side side Other One side side One Other side side side One side One Other side side Other side side side One side Other side One side side E side side Q 18 0 llustrations of combinations One side Other side BSP/NPT BSP/NPT BSP/NPT BSP/NPT BSP/NPT BSP/NPT BSP/NPT BSP/NPT BSP/NPT BSP/NPT One side We One side Other side One Other side connections Materials andMaterials Seals We manufacture Swivels BSP/NPT in different sizes, connections and materials request! Q2 side QSeals Q180 Other 180 on Standard and BSP/NPT standard manufacture Swivels inside different andFlange materials o 20 ( Other side One side Other side 2 ): 12 (: 1sizes, OneBSP/NPT side Other side Illustrations ofMcombinations SP/NPT Female BSP/NPT BSP/NPT Male BSP/NPT Male Male ) )2M Thread BSP/NPT F BSP/NPT BSP/NPT F BSP/NPT M BSP/NPT BSP/NPT M Thread : BSP/NPT 1 ( BSP/NPT Flange BSP/NPT FBSP/NPT FFF BSP/NPT Female BSP/NPT BSP/NPT Female Female BSP/NPT BSP/NPT Female Female BSP/NPT BSP/NPT Female Male BSP/NPT Male BSP/NPT BSP/NPT Male Male Male QMale EF F We manufacture Swivels inFemale different sizes, and materials 18Male B connections 0on request! 22BSP/NPT Thread Flange BSP/NPT F BSP/NPT BSP/NPT BSP/NPT F BSP/NPT BSP/NPT M BSP/NPT Female Female Female Male Male F F M M M MM BSP/NPT MMconnections Standard Materials and standard Seals 0 B B We manufacture Swivels in different sizes, and materials on re Operation Seal Seal side Component Other Female sideMaterial OneMaterial side Other side Onetemp side Other side Flat BSP/NPTOne Female BSP/NPT BSP/NPT Male Standard BSP/NPT Male BSP/NPT Male Standard Materials and standard Seals 0
Q302 Q302 Q302
Notice. This drawing contains poprietary information and shall not be used or reproduced or its contents disclosed in whole or in part, without the prior written concent of the Mann Teknik AB
Notice. This drawing contains poprietary information and shall not be used or reproduced or its contents disclosed in whole or in part, without the prior written concent of the Mann Teknik AB
Q158
3/4" NPT (ANSI B 1.20.1)
Q158
3/4" NPT (ANSI B 1.20.1)
3/4" NPT (ANSI B 1.20.1)
Notice. This drawing contains poprietary information and shall not be used or reproduced or its contents disclosed in whole or in part, without the prior written concent of the Mann Teknik AB
Q158
203 203 QQ
Weight: 2,5 kg
Q203
Ytbeh./Treatment
NoNo part of of this leaflet may bebe reproduced in in any form oror byby any means without permission in in writing the publisher. ABfrom Teknikfrom Mann concent of the written part this leaflet may reproduced any form any means without permission writing the publisher.
Weight: 2,5 kg
Scale:
Weight: 2,5 kg Weight: Weight: 2,5 kg2,5 kg
informationinformation contains poprietary This drawing Notice. Notice. contains poprietary This drawing or its contents or reproduced be used and shall or its contents not be shall used or reproduced andnot disclosed in whole or in part, without the prior disclosed in whole or in part, without the prior written concent of the Mann Teknik AB
Designed/drawn by P. Nyberg
Material
1 /1 Detail No:1 / 1 Rev.Material
Rev.
Rev.
Designed/drawn by Checked
Ytbeh./Treatment
Scale:
G. Kopplin
Detail No:
1:1
Checked
Notice. This drawing contains poprietary information and shall not be used or reproduced or its contents disclosed in whole or in part, without the prior written concent of the Mann Teknik AB
Material
D1241256606W D1241256606W Drawing No.
Drawing No. No. Drawing
Male D1241254406W D1241254406W Detail No: Material D1241254406W
Detail No:
Material
No:
Dimension with no tolerances acc to Machined SS-ISO 2768-1 medium Ytbeh./Treatm Weld Forge ent SS-ISO 2768-1 coarse Surface
and shall not be used or reproduced or its contents disclosed in whole or in part, without the prior written concent of the Mann Teknik AB
D15611402W-1
SS-ISO 2768-1 medium WeldData nr./Comp No. Forge SS-ISO 2768-1 Blad/Sheet coarse Surface roughnessD15611401W ISO 1302 1 /1 No. FormDrawing & position tol SS ISO No: 1101 Rev. Material DetailDetail
roughness ISO 1302 2009-10-30Dimension Form with no tolerances acc 1:1 Machined & position tol SS ISO 1101 to
Notice. This drawing contains poprietary information
2009-10-30
P. Nyberg T. Mann
Designed/drawn byG. KopplinScale: Date Approved
Ytbeh./Treatment
3 Ytbeh./Treatment Designed/drawn by Scale: Ytbeh./Treatment 1 with no tolerances acc to Dimension Designed/drawn Scale: Designed/drawn by by G.Scale: Kopplin with no tolerances to 2768-1 medium Dimension withMachined no tolerances acc toacc SS-ISO 1:2Dimension G. Checked Kopplin G. Kopplin Machined Weld Forge SS-ISO 2768-1 medium Machined SS-ISO 2768-1 medium 1:2 1:2 SS-ISO 2768-1 coarse Checked Checked Date WeldWeld G. Kopplin Forge Forge 2768-1 coarse SS-ISO 2768-1 coarse SurfaceSS-ISO roughness ISO 1302 G. Kopplin G. Approved Kopplin DateDate Surface roughness 1302 Surface roughness 2008-03-31 ISO 1302 Form & ISO position tol SS ISO 1101 Approved Approved T. Mann 2008-03-31 2008-03-31FormForm & position tol SS & position tol ISO SS 1101 ISO 1101 T. Mann T. Mann Data nr./Comp No. Blad/Sheet Data Data nr./Comp No. No. Blad/Sheet nr./Comp Blad/Sheet D1241256606W 1 /1
04 1
information contains drawing Notice. This the prior in whole or poprietary in part, without disclosed or its contents not beconcent used orofreproduced and shallwritten AB the Mann Teknik disclosed in whole or in part, without the prior Notice. This drawing contains poprietary information or its contents and shall not be used or reproduced concent of the Mann Teknik AB written
Checked
1
Kopplin Date SwivelApproved 3" -G.Heavy Duty
3
8
3" NPT FemaleT. Mann
19
/ 3" ANSI 150 PSI Swivel 3" - Heavy Duty
Q4
3"
2
Appr by
8
5
Detail No: Material DetailNo: No: Material Detail Material
Appr by
4
2
Sign.
4
2
Date
4
Q
2
5
5
Checked
5
1
4
Sign.
1 /1 1 /1
SS ISO
Data nr./Comp DetailNo. Ytbeh./Treatment No: Designed/drawn Material Blad/Sheet Ytbeh./Treatm Scale: Designed/drawn by by Scale: ent D15611401W Ytbeh./Treatm Dimension P. Scale: 1Designed/drawn ent with no tolerances acc to /1 Nyberg by P. Nyberg Dimension Drawing No. Checked Machined with no tolerances acc to Rev. Dimension SS-ISO 2768-1 P.Checked Nyberg 1:11:1 with no tolerances acc Machined medium to Weld Forge SS-ISO G. Kopplin 1:1Date MachinedWeld SS-ISO 2768-1 2768-1 medium coarse G. Kopplin Forgeroughness Approved SS-ISO 2768-1 Date Surface SS-ISO medium 2768-1 coarse Weld Forge ISO 1302 G.Approved Kopplin 2009-10-30 Surface SS-ISO 2768-1 T. Date Mann Form &roughness position 2009-10-30 tol ISO SS 1302 Surface Form ISO coarse 1101 roughness T. Mann & position ISO tol 1302
Approved
1
D15611402W-1
1
NPT Female / 3" ANSI 150 PSI
1101 Form & position Data nr./Comp tol No. SS Blad/Sheet Data nr./Comp No. ISO 1101 D15611401W Blad/Sheet Data nr./Comp No. D15611401W Blad/Sheet Drawing No. Rev. D15611401W
1 1
Swivel Wo k ng 4"PD02704401-1 essu e E 4"150 ps 10 ba 4" Swivel 1800 ps 125 ba Swivel
D02704401-1
2009-10-30 Swivel 3"T. Mann - Heavy Duty Swivel - Heavy Swivel 3" - 3" Heavy DutyDuty
3
Appr by Appr by
Q
8 3 3
TPN "4 004411QQ
D02704401-1
Swivel
2 8 8
2 2
Ytbeh./Treatment
Material
5
5
Q
Detail No: Material Ytbeh./Treatment Ytbeh./Treatment Dimension with no tolerances acc to Designed/drawn by Scale: Designed/drawn by Scale: Machined SS-ISO 2768-1 medium Dimension with no tolerances acc to Dimension with no tolerances acc to P. Nyberg P. Nyberg2768-1 medium Weld Forge SS-ISO 2768-1 coarse Machined Machined SS-ISO SS-ISO 2768-1 medium Ytbeh./Treatment Checked roughness Checked Surface ISO 1302 Weld Forge Q Weld Forge SS-ISO 2768-1 coarse SS-ISO 2768-1 coarse Scale: Date Q withDate no ISO tolerances accSurface to Qroughness G. Kopplin tol G. Kopplin Form position SS 1101 Surface roughness ISO 1302Q ISO 1302 Detail No: &Dimension Material Approved Approved Ytbeh./Treatment Machined SS-ISO 2768-1 medium Designed/drawn by Scale: Form & position tol Form & position tol SS ISO 1101 SS ISO 1101 Checked Data nr./Comp No. Blad/Sheet Dimension with no tolerances acc to 5"Female NPT Female / 5" NPT T. Mann T. Mann Weld Forge SS-ISO 2768-1 coarse Material Ytbeh./Treatment 5" / 5" NPT Male Revision comprises Date Sign. Appr by P. NO. Nyberg 5"NPT NPT Date NO.Revision RevisionData Date Sign. Appr D85854401NO.ISO MachinedBlad/Sheet Date SS-ISO 2768-1 medium G. Kopplin 1 / comprises 1:2 Q Sign. Appr by Designed/drawn by Scale: Data nr./Comp No.by Blad/Sheet 349 Female / 5" NPT Male SurfaceDimension roughness 1302 1comprises withChecked no tolerances acc tonr./Comp No. Approved Weld Forge 2768-1 coarse Drawing No. D85854401 D85854401 P. Nyberg 2008-12-17 1 /SS-ISO 1 1 /1 position tol SS ISO 11012768-1Date G. Rev. Kopplin SS-ISO medium 1:2 Form &Machined Surface roughness ISO 1302
Date G. Kopplin ApprovedDesigned/drawn by Scale: 3/4" NPT female / 3/4" NPT T. Mann male Date Date Dimension with no tolerances G. accKopplin to Date 2008-12-16 G. Kopplin tol G. Kopplin with no ISO tolerances acc Surface to Appr byroughness ISO NO. Revision comprises Date Form &Dimension position SS 1101Sign. Material Detail No: Ytbeh./Treatment Surface roughness ISO 1302 Detail No: Surface roughness ISO 1302 G. Kopplin 3 Data1302 nr./Comp Approved2768-1 medium Machined SS-ISO T. Mann P. Nyberg 2:1 Blad/Sheet Approved Approved 2008-11-19 3/4" NPT female / No. 3/4"8NPT male 3/4" NPT female / 3/4"FormNPT male Checked & position tol SS ISO 1101 Machined SS-ISO 2768-1 medium 1:2 Data Designed/drawn Scale: 2008-12-16 2008-12-16 SS-ISO 2768-1 D02704401 /1 NO.No. Revision comprises DateNO. Revision Sign. comprises Appr by Date Sign. Date Appr byWeld1 Forge T. Mann coarse Form & position tol bySS Formno&tolerances position tol ISO 1101 SS ISO G.1101 Checked Dimension with acc to nr./Comp Blad/Sheet Kopplin Detail No: Material T. Mann Surface Weld Forge Data nr./Comp No. Blad/Sheet SS-ISO 2768-1 coarseYtbeh./Treatment 3 roughness ISO 1302 8 2008-11-19 Rev. ApprovedNo. P. Nyberg T. Mann Machined SS-ISO 2768-1 Drawing medium Form & position tol SS ISO 1101 Date 1:2 D17174401by ISO Scale: 1 nr./Comp D02704401 1 /1 T. Mann No. with no tolerances Blad/Sheet Data nr./Comp No. Blad/Sheet Checked SurfaceDesigned/drawn roughness 1302 1 /Data Dimension acc to Weld Forge coarse Drawing No. Rev. Data nr./Comp No. Blad/Sheet NPT/ female 3/4" NPTSS-ISO male2768-1 P. Nyberg Date Rev. Sign. Drawing No. D17174401SS-ISO D17174401 Date3/4" 2008-12-16 1 Surface /roughness 1 /1 Machined G. Kopplin 2768-11 medium NO. Revision comprises Appr by Form & Checked position tol SS ISO 11011:2 D02704401 1 /1 ISO 1302 T. Mann NO. Revision comprises Date Sign. by Approved Weld Forge 3/4" NPT female / Appr 3/4" SS-ISO 2768-1 coarse Drawing No. Rev. NPT male Drawing No. Rev. DrawingtolNo. SS Rev. 2008-12-16 NO. Revision comprises DateISO 1101Sign. Appr by Form & position Date Blad/Sheet Data nr./Comp No.G. Kopplin Surface T.roughness Mann ISO 1302 NO. NPT Revision comprises NO. Revision Date comprises Sign. Appr by Approved 3/4" female / 3/4" NPT male 2008-12-16 1 /Form NO.D17174401 Revision comprises DateISO 1101Sign. Appr by & position tol SS 1 Data nr./Comp No. Blad/Sheet T. Mann ggkk0066,6,6:t:hthgie D17174401 Date Sign. Appr by No. 1 /1 Drawing Rev. gieWW gk 06, Data nr./Comp No. Blad/Sheet
20
4 5
4
2
Sign.
Scale:
4
5
Sign.
1
Date
to Dimension Vikt/Weight Vikt/Weight Detail No: Material with no tolerances acc Ytbeh./Treatment No: Material Ämne/Blank Detail Detail No: Scale: Ämne/Blank Material Ytbeh./Treatment G. Kopplin Machined SS-ISOby2768-1Scale: medium 2:1 Designed/drawn Designed/drawn by Checked Dimension with no tolerances acc to Dimension Designed/drawn with no tolerances acc to Scale: byNo: Weld Forge SS-ISO Detail G. Kopplin2768-1 coarse G. Kopplin Date G. Kopplin Machined Machined SS-ISO 2768-1 medium SS-ISO 2768-1 medium 2:1 2:1 Ytbeh./Treatment Surface roughness Checked ISO 1302 Checked P.SS-ISO Nyberg2768-1 coarse Approved Weld Forge SS-ISO 2768-1 coarse Detail No: Material Ytbeh./Treatment 2008-11-19 Ämne/Blank Form & position tol SS ISO 1101 Date Vikt/Weight Weld Forge Date G. Kopplin T. Designed/drawn Mann Checked ISO 1302 Detail No: Material Ytbeh./Treatment Ytbeh./Treatment Surface roughness ISO 1302 ApprovedG. Kopplin Surface roughness by Scale: Dimension with no tolerances acc to Approved Dimension with no tolerances acc to 3 8 Data nr./Comp No. Blad/Sheet 2008-11-19 2008-11-19 Form & position tol SS ISO 1101 Form & position tolG. SS ISO 1101 No: Material Date Designed/drawn by Scale: Designed/drawn by Scale: G. Kopplin Kopplin Machined T. Mann T. Mann Detail SS-ISO 2768-1 medium Machined acc 2768-1 2:1D02704401 Vikt/Weight Detail Material Ytbeh./Treatment Ämne/Blank Dimension with no tolerances acc to tolerances to SS-ISO 1 /No: 1 medium Checked Dimension with no Approved Designed/drawn Weld Forge No. Blad/Sheet Data nr./Comp No. Blad/Sheetby SS-ISO 2768-1 coarse Data nr./Comp Designed/drawn by Scale: P. Nyberg P. Nyberg2768-1 medium Weld Forge SS-ISO 2768-1 coarse Drawing No. Rev. Dimension with no tolerances acc to Date G. Machined Kopplin Machined SS-ISO SS-ISO D02704401 D02704401 Ytbeh./Treatment Surface 2768-1 roughnessmedium ISO 1302 G. Kopplin Checked roughness Checked T. Mann P. Nyberg1 / 1 Approved SS-ISO 2768-1 medium 2:1 1 / 1 Machined Detail No: 2008-11-19 Ytbeh./Treatment Checked Vikt/Weight Ämne/Blank Surface ISO 1302 Weld Forge Weld Forge Material SS-ISO Form & position SS-ISO 2768-1 coarse 2768-1tolcoarse SS ISO 1101 Drawing No. Rev. Drawing coarse No. Rev. Weld Forge SS-ISO 2768-1 Designed/drawn by Scale: Designed/drawn by
E
Date
Vikt/Weight
Ytbeh./Treatment
Ämne/Blank
4
TTPPNN ""44TPN "4
Material
Material
3
noitamrofn i yrateirpo p s s t n n i e a t t n n o o c c s g ti r o d e c niward sihT .ecitoN roirp eht t udorper ro desu eb uohtiw ,tra t p ni ro elo on llahs dna BA kinkeT nnaM eht f hw ni desolcsid o tnecnoc noitamrofn nettirw iy sntonietatmrofni y rateirpop sniat stnetnnooccssti rroatdeiercpuodporspniatnoncogc gniward sihT .e er ro deniward s citoN roirpti ro dec roirp eehthtt tuouhdtoiwrpe,trrarpo desuseubeb tiohnT l.leachitsoNdna BAuohtiw ,tra ni nrioro elothown nlliadhessdna Q o lc elo BA kikniknekTeT nnpaM nnaM ehethft fohwtnneicndoecsonlcsid sid o tnecnoc e nettirtwtirw
P. Nyberg
Checked
Detail No:
Scale:
Material
2
NO. Revision comprises NO. Revision comprises Revision comprises
Designed/drawn Detailby No:
Detail No:
62
5
TPN "4
Material
62
1
TPN "4 TPN "4
Detail No:
62
.
written concent of the Mann Teknik AB
One side Other side One side Other side One side Other side One side Q180 B Other side One sideBSP/NPT Other side OneComponent side BSP/NPT One side Other Male sideD9393K4401W 112 18 Standard ) 2 : 1E ( 1 Material 5 Material Operation temp Seal Flat Seal F BSP/NPT 4 Female BSP/NPT Female BSP/NPT Male BSP/NPT BSP/NPTQtemp Male 18 18 Q180 EN 755 -Female AW-6262-T6 8x2 Q 3Standard side One side Other One sideF BSP/NPT Other side PUR side MOther side MOne D9393K4401W D9393K4401W 9 8 7 D9090K4401W Thread BSP/NPT F Flat BSP/NPT M One BSP/NPT BSP/NPT Component Material Material Operation Seal Seal side B 3" weld end 89 8x Q 8x 3" 9 8 7 9 BSP/NPT 8 7 Female BSP/NPT Male D9090K4401W D9090K4401W 4 Aluminium BSP/NPT Female BSP/NPT Female E BSP/NPT Male BSP/NPT Male 8 ) 1 89 89 weld end 3" weld end 2" weld end 60 2 1 9 :1( 4194 D9393K4401W 19 B EN 755 - AW-6262-T6 (Vulkollan®) 2" weld end 60 2" weld end 60 EN 1706-AC-42100-T6 BSP/NPT F BSP/NPT F BSP/NPT F BSP/NPT M BSP/NPT M BSP/NPT M Thread PUR 8ox Q 9 8 7 D9090K4401W PTFE o 89 3" weld 1end EN 755 AW-6262-T6 8 PUR Aluminium -100 C to 250 C D9393K4401W Body 791 2" weld end 60 8x Q 791 791 9 8 7 D9090K4401W Aluminium (Vulkollan®) EN 10272 - 1.4404+ATEN 1706-AC-42100-T6 (Teflon®) weld end 89 Stainless PTFE PTFE Q18 oC 3"PTFE (Vulkollan®) 2" weld end 8x 60 EN 1706-AC-42100-T6 9 8 7 D9090K4401W 419 -100oCD9393K4401W to 250 Body 89 oC 349 60 weld end -100oC3" weld toend250 349 SteelBody EN 10213 (Teflon®) 349 10272 - 1.4404+AT (Teflon®) - 1.4409+AT2"EN Stainless PTFE EN 10272 - 1.4404+AT (Teflon®) Stainless PTFE 1:2 Steel (Teflon®) 1:2 1:2 EN 10213 - 1.4409+AT 1:2 Swivel 12x 32 Swivel 5" - Double Ball Race Steel (Teflon®) Working Pressure:ESwivel 150 psi (10 bar)-1800 psi (125 bar) 2008-12-17 EN Swivel 5" - Double Ball Race 1:2 1:2 12x12x 3232 Swivel Swivel10213 - 1.4409+AT 349 5" - Double Ball Race 1:2 2008-12-17 2008-12-17 112
1:2
Dimension with no tolerances acc to Machined SS-ISO 2768-1 medium Ytbeh./Treatment Weld Forge SS-ISO 2768-1 coarse
Q302
Q203
Notice. This drawing contains poprietary information and shall not be used or reproduced or its contents disclosed in whole or in part, without the prior of the contains Mann Teknik AB written information poprietary This drawing Notice.concent poprietary Notice. or information its contents or reproduced be usedcontains notdrawing and shallThis contents itsprior reproduced be used and shall innot disclosed whole withoutorthe or inorpart, disclosed in whole or in part, without the prior concent of the Mann Teknik AB written written concent of the Mann Teknik AB
G. Kopplin
Notice. This drawing contains poprietary information and shall not be used or reproduced or its contents disclosed in whole or in part, without the prior written concent of the Mann Teknik AB
Notice. This drawing contains poprietary information and shall not be used or reproduced or its contents disclosed in whole or in part, without the prior written concent of the Mann Teknik AB
D15611401W
Rev.
1 /1
Blad/Sheet
Dimension with no tolerances acc to Machined SS-ISO 2768-1 medium Weld Forge SS-ISO 2768-1 coarse Surface roughness ISO 1302 Form & position tol SS ISO 1101
2009-10-30
Date
Notice. This drawing contains poprietary information information contains poprietary drawing Thisused Notice. or its contents or reproduced not be and shall or its contents reproduced andinshall wholenotorbe the prior without in used disclosed part, or in whole without the prior or inTeknik part, AB the Mann concent of writtendisclosed written concent of the Mann Teknik AB
T. Mann
Approved
Data nr./Comp No.
Revision comprises
12x Q32
Date
Revision comprises
Date
gk 06,6 :th gieW
62
tnem
438
62
Q302
D9090K4401W D9090K4401W
Sign.
Appr by
Appr by
Swivel 5" - Double Race 5" NPT Female / Ball 5" NPT Male
eta.DoN gniwarD
.oN gniwar D
sesirpmoc
sneosisirivpemRoc .ON noisiveR
TPN "4 - TTPN "4 - sTesPirpmoc noisiveR N "4 PN
751
751
.ON
gk 3,7 g:tkhgieW :thgieW gk 3,7 :th3g,7ieW
.ON
:noitcenn noitbar cen n/oC1140oC Working pressure: "4 :80 psi Working pressure: 80 Test pressure: 135bar bar//1140 1920psi psi Test pressure: 135 bar / 1920 psi Axialpressure: force: 7,5 bar t / 1920 psi Test 135 Axial force: 7,5 t Axial force: 7,5 t
Data nr./Comp No.
D1241256606W
Drawing No.
5" NPT Female / 5" NPT Male
438
Thread ytuD yvyFlange tueDHyvaeH a W60447W "4 levi"v4SlevivS 447171D 17610D Thread Flange Working pressure: 80 bar / 1140 psi .ngiS
Sign.
D9393K4401W D9393K4401W D9393K4401W 89 end 89 3" weld end3"weld 3" weld end 89
gk 06,6 :th gieW
taerT/.heb ot c c a s e tYtnemt D9090K4401W 60 c n ar e l end aerT/.hebt 2" weld2" mu id e m 1 weld end 60 Y 8672 OSI-m ot ootn chcatiw secnnoaisrenleomi SuSid tD es r a o c 1 end 60 8672 OSI-es em 1-8672 OSdI-eSnSihc on htiw noisnemiD:elacS 2"lairweld yb nw:ealrd/ aM SSraoc 1-867 etaM acSdengiseD d1e:n1ihcaM 2 eOgSrIo-F yb nward/ lairet:aoMN liateD SS 2 0 3 1 O SI dengiseD ssenhg2u0o31 O dleW e g r o F dl e 1:1grebyN .P :oN liateD grebyN .P 1 01 1 O S I S S lot n1o0it11 OSr I ecSaIfrusSsenhguor ecafr WetaD dekcehC uS isop &SSmrlot no dekcehC et n o F i7 ti 0 yb teehS/dalB so-p11&- mro nilppoK .G teehS/dalB 800F2 70-11-8il0pp0oK .aGdD 1 / 1rppA yb rppA 2 evorppA W601.4/n4g1i7S171 .ng.oN pmeWotC6a/D.rn ataD .oN pmoC/.rn devorppA yb rppA .veR 0447171D D iS ataD nnaM .T nnaM .T .veR etaD
Blad/Sheet
D9393K4401W D9393K4401W weld 89end 89 3" weld3"end
D9090K4401W D9090K4401W 60 60 weld end 2" 2" weld
1 /1
Rev.
Rev. D1241254406W
D1241254406W
tnemtaer
Swivel 3" - Heavy Duty T. Mann
Approved
Date
G. Kopplin
Checked
Vikt/Weight Vikt/Weight Ytbeh./Treatment Ämne/Blank Ytbeh./Treatment
Ytbeh./Treatment Material Ämne/Blank
Dimension withYtbeh./Treatment no tolerancesÄmne/Blank acc to Vikt/Weight Material Ämne/Blank Ytbeh./Treatment Designed/drawn by P. Nyberg
D15611401W
Data nr./Comp No.
1:1
Rev.
1:1
1 /1 Checked
Blad/Sheet Designed/drawn by P. Nyberg
Dimension with no tolerances acc to Machined SS-ISO 2768-1 medium Weld Forge SS-ISO 2768-1 coarse Surface roughness ISO 1302 Form &Detail position No: tol SSMaterial ISO 1101
2009-10-30
Ämne/Blank Detail No:
Vikt/Weight
NO.
Drawing No.
Scale:
Ytbeh./Treatment
Material
D1581584401WDetail No: Material Detail Material Detail No: 1½" weld endNo: 48
Appr by
B
Sign.
Weight: 2,5 kg
Detail B No:
D1581584401W
Date
B
Revision comprises
Notice. This drawing contains poprietary information and shall not be used or reproduced or its contents disclosed in whole or in part, without the prior written concent of the Mann Teknik AB
Drawing No.
B
D1581584401W
1½" B weld end 48 D1581584401W
Vikt/Weight
ytuD yvaeH :oN liateD Dimension no tolerances acc Dimension to with no tolerances acc to Machined Ytbeh./Treatment SS-ISO 2768-1with medium Vikt/Weight 1-W 1:2 Ämne/Blank 60445858D yv"4aeleHvi"v4Slev y ytu e yvDae Machined Machined SS-ISO medium SS-ISO 2768-1 -W 1:2 2768-1 TPNtu"4D- e H Weld Forge 1:2 2768-1 44)5other 1:2 Dimension 1-W1medium 858Dlamconnection evivS ivS *46) )50Or 4 1:2Swivel 04 with noSS-ISO tolerances acccoarse TPN"4"4ld lam TPNla"m - Double BallWeld Race 8* 58D Forge SS-ISO 2768-1 coarse SS-ISO 2768-1 6 coarse elameT erhT - elam TPaN roughness ISO Weld 1302 Forge PNconnection *) to)8"*8" Or other "4 - e4 Or other connection on request Swivel - Double Ball Race Machined * on SS-ISO 2768-1 medium )- 8" lam T daerhT 1:2 Surface ytuD yvaeH Orrequest other connection PN "4 da"4 Surface roughness Surface roughness on ISO 1302 ISO request 1302 Swivel Double Ball Race 2009-11-12 Form & position tol SS ISO 1101 e r Or other connection h Flange 8" ANSI 600 Ring Joint R49 " 4 T 1 D1301304401W-1 l e W v * Or 60445858D Weld 2009-11-12 Forge SS-ISO 2768-1 coarse ytuD yvaeH ivS 2009-11-12 other connection on 2009-11-12 request Form & position tol Form & position tol request Swivel 5" - Double Ball Race SS ISO 1101 SS ISO 1101 2009-11-12 Swivel with extra bearing Flange 8" ANSI - Ring "4 levivS D1301304401W-1 on on request 1-W60*4) 4Or Flange 8" ANSI 600 -600 Ring JointJoint R49 R49 Surface roughness ISO 1302 Swivel with extrabearing bearing sesirpmoc no D1301304401W-1 Swivel - Double Ball Race 8D *)Swivel Swivel with extra with bearing extra isi econnection lam TPN "4 Swivel withother extra Or connection on request )585other )bearing *) *Or *) 8" other connection on - elam TPN 2009-11-12 OrDouble otherBall connection on request *on Form position tol SS ISO 1101 1 / 1 1 / 1 *) request Or other connection *) Or other Or other connection Orconnection on other request connection on& request 3" BSP Female / DN80 PN10/16 on request Swivel Race "4 daerhT yb rppA request T. Mann 3" BSP Female / DN80 PN10/16 D1436B4415A .snegsiSi Flange 8"-ANSI Joint R49 D1301304401W-1 D1436B4401A D1436B4415A Swivel 4" 1 /1 Date Sign. Appr by extra *) 8" 1 /by1 1 Sign. 1 600 /1 / 1 - Ring 2008-03-31 NO. Revision comprises Date Appr Swivel with bearing Or other connection on request 3" BSP / DN80 PN10/16 BSP Female / DN80 PN10/16 3"Female Female / DN80 PN10/16 D1241256606W Drawing No.nr./Comp Rev. Rev. 1 registered trademarks ) D1436B4415A Swivel 4" D1436B4415A Drawing Date Date3" Sign. Appr by Appr D1436B4415A yb rppA Swivel 5" - Double Viton® Ball Race and Sign. Appr by Sign. by D1581584401W DuPont Elastomers. Teflon® are1 /No. of DuPont, registered trademark of Bayer AG Drawing No. Rev. Data No. Blad/Sheet on request *BSP Flange 8" ANSI Vulkollan® 600 - Ring Jointis R49 Drawing No. Rev. Weight: 2,5 kg
Q302
Ytbeh./Treatment
Material
Material
Detail No:
Detail No:
48
Scale:
1½" weld end
48
1½" weld end
4
SwivelDrawing 4"No.
Surface roughness ISO 1302 Data nr./Comp No. Blad/Sheet Form & position tol SS ISO 1101
Notice. This drawing contains poprietary information and shall not be used or reproduced or its contents disclosed in whole or in part, without the prior written concent of the Mann Teknik AB
Swivel 4"
G. Kopplin Approved T. Mann
031 htdiW da eH
Swivel 4"
Or other connection on request noitamrofn iy stnetnoc nsoitamrartoefirpop sniatnoc g ti ro decni yratei niward s roirsptneehttnotc stui droorper rrpoopdessnuiatenboc gnihiwTar.ecitoN de cu d si uoh ton oirp ethiwt t,turap dnoi rrpoerelroohwdesu lelabhst dnhaT .ecitoN BrA kinkeT nnoahtiw ,trap on n ni ro i desolcsidllahs dna eht BA kinM keT nnfaoM tnecnoeclonhewttniri wdesolcsid eht fo tne cnoc nettir w
Q302
041Q
noitamrofn i yrateirpo p sniatnoc stnetnoc s gniward sih ti r o d e c T .ecitoN roirp eht t udorper ro desu eb uohtiw ,tra t p ni ro elo on llahs dna BA kinkeT nnaM eht f hw ni desolcsid o tnecnoc nettirw
Q203
D15611402W-1
3" NPT Female / 3" ANSI 150 PSI
D15611402W-1
150 PSI
and shall not be used or reproduced or its contents
nnaM devorpn.pTnAaM .T
aM .T ytyunnD yvyaveaHe "4 ytuD ytuD H "l4evle ivS
)2:1
W 3" - Heavy Swivel Duty
drawingin contains Notice. This whole orpoprietary without the prior in part, information disclosed and shall not be used or reproduced or its contents written concent of the Mann Teknik AB disclosed in whole or in part, without the prior written concent of the Mann Teknik AB
3" NPT Female / 3" ANSI
Appr by
Sign.
disclosed in whole or in part, without the prior written concent of the Mann Teknik AB
002
vivS TPTNP "4v-aTeH "4 le N 4 :noivt ivS TPN "4 - T "4 -PTNP"N PN "4 :no "4 :ncoeitncneonC itcennoC noC E Date
Q203
438 438
44 taD .oN pm7o1C7/1. D rn ataD .oN gniwar D ar .oN gniw D .oN gniwar D
Revision comprises
0447171D
NO.
751
NO.
4
.v.evR We6R
W W6004444771171D W60446 7171D 71D
Rev.
NO.
751 751
3" NPT
4
2
.veR
Drawing No.
1 /1
Q190,5
2
5
438
1/ 1
Blad/Sheet
D85854401
Drawing No. 4" NPT Male / 4" NPT Rev. Male
Head Width 100 Q110
1
TPN "4 TPN "4
Appr by Revision comprises Revision comprises Date
5
1
Appr by 6262 ta 4"Sign. NPTtnemMale / 4" NPT 62 Male
Date
( BSP/NPT M) 2 :BSP/NPT M 1E ( BSP/NPT M BSP/NPT M
BSP/NPT F BSP/NPT M BSP/NPT F BSP/NPT M 1
3
TPN "4
Date comprises Sign. Revision
8
E
Data nr./Comp No.
4" NPT / 4" NPT Male 6 :thgiMale eW
tnemtaerTe/rT/ .he.bhteYbtY ototcccacasese tc c em1-18-687627 nneamnrtaearleoertloTot/n.hoehnbtithwY ot mcmucuiadiedm tinwoinsoniesmne iDmiD S muidem 1- eessraroascoecc1-n18a-6relo2tOSoOIn-SSI-hSS :elacS:elacS iw noisnem dendiehncaihMc 8672 OSI- 876272OSOIS yb nwyabrdn/wa lairetlaaMiretaM -SI-SStS aM SS derndg/isdeeDngise es r a o c 1 :e1la:1cS1:1 egiD :oN lia:toeND liat reo 8672 OSI- 20230131OSOI yb nwardg/rebygNre.PbyN lairDetaM eD SS SI ssdseesnnhihcarM gFrodFledWleW dengiseD .P uoercaefcraufSr 1:1 :oN liateD 2031 O1S01I10111OSOISSI SSSleogtronFedgnulheogW dekcehdCekc uS etagDreetbayDN .P ehC 1011 tOetSeehIeShS/SdalB ssenhguorloetcoanitfoirsiutoiSpso&p m nilpponKilp.Gp &romFroF 70-7101 S/dallBot noit dekcehCoK .G et-a18 1/ D10-082002 is o devorpdpeA nilppoK .G teehS/d1 a/l1B1 WW 606404717p1D&.oNm.orpNomoFpCm/o.rCn/7.ar0tna-Da11-8 vorppA
Appr by
Head Width 100 Q110 3" NPT
B
Detail No:
4
NO.
4
2
Sign.
N "4
4
2
5
Date
Tt/n.heebtY ot c c a s ec n mtaerT/ ot acrcealotseoctnnnehm mu id e m 1 - 8 6 tloaenroTis/n.heembiDtY .hebtY Q4 yb rppA yb rppA arteiw .ngiS t o n h ti w :elacS omkg tueic7dt c2eDamOsS1eI--c8Sn6S Weight: .ngie laireta S sra120 19 yb nward/den 4 a7r2elO otSI-oS giseD n ShtiwdennoihiscanM noisnemiD mWeight: :elacS uidoec me1t-ae18D-s68r7a62a120 5 S k ng3kis,73,M:7thgielW air:eoN liateD yb nwardg 7oc2OS1OI--Skg egroF dleWesemsiirdDenihca1:M1 /deg 8I6-S7S2S OS :elacS grebyNy .P eDlairet:atM Weight: esra120 hgietWaM :oN :oN liateD pmoc noisiv b nward/deng oc 1-kg 2 de n s 4 1:1 8 2 0 3 1 O SI s s I - S S eR . 8 5 liateD dekcgerheCbyNise.PD 1016172OSOI SSI-SSS2031enOhSgIuorseegcafruihSeecsigarprMmooFc ndoilseivW eR 1: ON 3 Detail No: Material Ytbeh./Treatment 1 2031 10O1S1IloOtSsnsoitisop s&eronmhFrgoduFloerWecafruS .1ONetaD nilppoKgrebyN .P dek 2 9 1140 I SeS nhgluootr80 -50-9psi teehSWorking tnemtaerT/.h Ytbeh./Treatment /da1l0B11 O pressure: 8 002 etaD etaD.GdevorpnpildApepkocKeh.GC otcehC neobar 791 Detail No:Detail No: MaterialMaterial Designed/drawn by Scale: citbar aifsroup/S/&2 Dimension with no tolerances acc to 3 S Working pressure: 80 1140 I mroF psi S S tnemtaeerbTtY 1/ 1 Ytbeh./Treatment c c a s ec 92-50-900n2na nilppoK .G m tepressure: 1 eh6S/dalB lot.onNopitmiosCo/135 Designed/drawn by Scale: .prn &atabar G. Kopplin Test psi mDroF / 1920 M .T MachinedDimension with uidedemvo1r-p8po6At7 cca nsaercenlot on htiw noisne /.hebtY SS-ISO 2768-1 no tolerances accW to0445858D 1:4 92-50psi t h/medium Designed/drawn by Scale: Material Ytbeh./Treatment -9002 S/1pressure: 2 O S I - S S ar e l ot o n .obar Designed/drawn by Scale: dalB N pmoC//.rn1920 Checked Q4 :elacS Test 135 .veRee1to D1581584401W G. Kopplin Dimension with no tolerances acc Weight: 120 kg denvnoareMpspr.m u hdteinwi nmoiiDsnem lairetaM a D1581584401W i t d a W e D yb nw Weld Forge m 6 SS-ISO 2768-1 coarse a A 0 o Machined 1 4 SS-ISO 2768-1 medium c 1 4 8 T / . 1 1:4 o 5 -8672 6O7S2I-O Axial.veRforce: 7,5 N 8p5m8 1 hc a M iD oD t Designed/drawn Scale:Material SI-SS G. Date 1Ytbeh./Treatment :elacS ard/dyengiseD SS G.Kopplin Kopplin Checked W6coarse Detail by No: No: acc toMaterial Ytbeh./Treatment nnaM .TWeight: 9 lairet:oaNM liateD N gCn/iw.ranrDataD 0445858D .o7,5 by Scale: Designed/drawn by Scale: Checked esra120 Machined SS-ISO medium 1:1 Dimension with no Detail tolerances 1:4 Surface Weld roughness oc 1-kg e g r o F d d e ni h 1302 2768-1 grebyN .P b nward/dengise Forge ISO SS-ISO 2768-1 Axial force: t 82607321 OOSSI I-SS Approved D P. NybergDesigned/drawnDesigned/drawn .veR coarse Material Designed/drawn Ytbeh./Treatment by Scale: Date No: 48 1½" weld end ssenhguor e egleW caM G. KopplinDetail No: Detail No: Material Ytbeh./Treatment G. Kopplin 2008-05-16 Detail Material Ytbeh./Treatment by Scale: Designed/drawn by Scale: Weld Forge Designed/drawn by Scale: 1:1 . SS-ISO 2768-1 o 1½" weld end 48 N Form & position tol g SS ISO 1101 n gderkecbeyhNC .P i w Machined SS-ISO 2768-1 medium ca ro arD Surface roughness ISO 1302 1011 OS2I 0S3S1 O 1:1 Dimension with no tolerances Dimension with no Scale: tolerances accbyto Scale: Dimension with no tolerances acc to Q349 Date Designed/drawn by Scale: etaD T.Kopplin Mann G.Approved Designed/drawn Dimension with no tolerances acc Surface to Form loStI nositsiseonphg fruSF dle W Detail No: Material Ytbeh./Treatment .oN gniwarD Checked Designed/drawn by tolerances P. Nyberg P. Nyberg acc to nilppoK .G roughness Checked Dimension with no acc to ISO tol 1302 Dimension with no tolerances acc to &uomrroeFcaf9 2008-05-16 G. Kopplin G. SS-ISO Kopplin position tolerances acc to SS ISO 1101 Weld Forge dekcehC SS-ISO1:12768-1 coarse ru2S-50-9002 teehS/dalB1011 OSI SS l Machined Designed/drawn by Scale: medium SS-ISO 2768-1 medium Data nr./Comp No.& Detail Kopplin Dimension 1:1 1:2with noMachined G. Kopplin etaD Material Ytbeh./Treatment P. Nyberg Checked SS-ISO 2768-1 by P. Nyberg Scale: Machined No:ISOBlad/Sheet Ytbeh./Treatment SS-ISO Designed/drawn 2768-1 medium o t oi ti s o p Machined 2008-05-16 mediumApprovedT. Mann T. MannSS-ISO Date Dimension with no tolerances denviloprppA Machined SS-ISO 2768-1G.2768-1 & position tol SS G. Kopplin 1101Material P. Nyberg 1:1 Checked Checked Machined 1 / 1acc to Checked 2768-1 .oN pn & mroF 92-5 Machined medium moC/.rn ataD 1:1 medium Surface Checked roughness ISO 1302 D1301304401W 1 /1 G. Kopplin 79Form Weld SS-ISO Forge Checked Date Checked SS-ISO 2768-1 Weld Forge Weld Forge2768-1 temedium SS-ISO coarse SS-ISO 2768-1 coarse by Scale: 1 medium ehS/daW Designed/drawn by Scale: 4 0-9002 nnaM .T poK .Gdevo Data nr./Comp No. Blad/Sheet Machined Checked SS-ISO 2768-1 G.coarse Kopplin ApprovedDesigned/drawn Weld Forge 1:4 SS-ISO 2768-1G.2768-1 coarse Date Forge Checked Weld Forge Kopplin Dimension with no tolerances to lB60445858D Dimension with no ISO tolerances acc to Date DateWeld Checked rppA P. Nyberg P. Nyberg SS-ISO 2768-1 SS-ISO 2768-1 coarse .v1eacc Surface roughness Date 2009-10-08 ISO coarse 1302 R coarse 12768-1 P. Nyberg tol Data nr./Comp No. Blad/Sheet / .oN pmoC/.rn Form & position Drawing No. Rev. SS 1101 Weld Forge P. Nyberg SS-ISO Approved D1301304401W Weld Forge Surface roughness Surface roughness ISO 1302 ISO 1302 SS-ISO 2768-1 coarse 1 1 / G. Kopplin Date Surface roughness ISO 1302 a taD P. Nyberg W60445858D.oN Date Date nnaM .T Date 2008-03-31 T. Mann G. Kopplin Machined SS-ISO 2768-1 medium Date G. Kopplin Kopplin Form ISO & position SS ISO 1101 Approved 1:4 G. Kopplin G. Kopplin Approved Surface roughness Machined SS-ISO 2768-1 medium 1302 tolApproved 1:1 Approved D1301304401W gniwarD yb 1 / 1Rev. Checked Date G.ISO Surface roughness ISO 1302 Mann 2009-10-08 2009-10-08 G. Kopplinroughness 2009-10-08 .veR coarse Approved Surface rppA 1302 Form & position tol tol SS ISO Form & position Form & positionDetail tol No: Drawing No. Ytbeh./Treatment SS1101 ISO T.1101 SS ISOMaterial 1101 Checked Approved Weld &Forge Checked 2768-1 Data nr./Comp No. Blad/Sheet Surface roughness T. Mann ISO 1302 Form & position tol 2008-05-16 Form SS ISO Approved Data nr./Comp No. 1101 Blad/Sheet . n Weld Forge T. Mann T. 2009-10-08 Mann position tol SSSS-ISO g SS-ISO 2768-1 coarse ISO 1101 i Approved Approved S Date Drawing No. Rev. Designed/drawn by Scale: G. Kopplin . oN gniwarD T. Mann etaD Approved Revision Date Sign. Appr bytol SS ISO 1101 Date Dimension with no tolerancesForm acc to & position T.Material Surface roughness ISO 1302 yb rppA P. 32 Nyberg D1241256606WNO. 1 Mann / 1 comprises No. No. Blad/Sheet 1 /nr./Comp 1 T. Mann 12x Q Approved SurfaceD1436B4401A roughness ISO 1302 Data Blad/Sheet nr./Comp No.Detail No: Blad/Sheet elyab m G. Kopplin Date No. Blad/Sheet .ngiS Form & position tol SS ISO 1101 Machined SS-ISO 2768-1 medium 2008-05-16 Data No. Data Blad/Sheet rppT 1:2 T. Ytbeh./Treatment T. Mann Kopplin Formnr./Comp & position tol SS ISO Approved A PN "4 - el 1101 Drawing No. Q349Data nr./CompD1436B4401A Checked 1 / 1 Data1 nr./Comp Designed/drawn by Scale: etaD Mann Mann NO. Rev. Revision G. comprises Date Sign. Appr by T.Blad/Sheet T. Mann .ngiSam TPN 2009-10-08 Drawing Form No. T.toNo. Mann D1436B4401A Weld Forge D1301304401W SS-ISOacc 2768-1 coarse & position tol SS ISORev. Dimension with no tolerances 1 / 1 G. Kopplin 1101 1 /1 /1 Data nr./Comp D1436B4401A NO.D1436B4401A 1 Approved / 1 comprises Date eta"D4 daerh Revision Date Sign. ApprNo. by T. Mann G. Kopplin Drawing No. 5" NPT Female /Rev. Surface roughness Datamedium nr./Comp Blad/Sheet Data nr./Comp No. Blad/Sheet ISO 1302 Machined SS-ISO 2768-1 T 1:2 5" NPT Male Drawing No. Rev. D1241254406W Approved Drawing No. Rev. Drawing No. Rev.Checked Drawing No. Rev. NO. Revision comprises Date Sign. No. Appr by Data nr./Comp No.Data nr./Comp No. Blad/Sheet Data nr./Comp No. Blad/Sheet 2008-03-31 Weld Blad/Sheet FormForge & position tolSS-ISO SS ISO2768-1 1101 coarse Data nr./Comp Blad/Sheet D1301304401W 1 /1 T. Mann Date
Detail No:
4
5
4
2
Appr by
Revision comprises
TPN "4
1
2 3 BSP/NPT F BSP/NPT F BSP/NPT F BSP/NPT F 3
5
5
Sign.
NO.
Revision comprises
031 htdiW da eH
1
31
2
NO.
Surface Data roughness nr./Comp ISO No. 1302 Blad/Sheet SS ISO 1101 D1241256606W 1 /1
031 htdiW da TP eH
3
5
Date
Rev.
Rev.
DimensionSurface with no roughness tolerances acc ISOto1302
Machined SS-ISO 2768-1 medium 1:22008-03-31 Form & position tol SS ISO 1101 Weld Forge SS-ISO 2768-1 coarse
3" NPT
2
1
D02704401-1
Revision No. 1 / Drawing 1 comprises
Date
Head Width 100 3" NPT Q110 Head 3" Width NPT 100 Q110 100 Head Width Q110
5
3
NO. D17174401
Drawing No. 4" NPT Female / 4" NPT Male
Appr by 4" NPT Female / 4" NPT Male
Date
TPN "4
mprises
1
Sign.
Appr by
TPN "4
3
2
Date
Sign.
Scale:
G. Kopplin G. Kopplin Approved T. Mann
G. Kopplin Approved T. Mann
2008-03-31 Form & position tol Swivel 5" - Double Ball Race Drawing No.
fo tnecnoc nettirw
2
5
4" Swivel
4" NPT Female / 4" NPT Male
Date
031 htTdPiWN d"a4 eH TPN 031 htdiW"4da eH 031 htdiW da eH
5
1
4" NPT Female / 4" NPT Male 4" NPT Female / 4" NPT Male 4" NPT Female / 4" NPT Male Appr by
Sign.
Revision comprises
"4
1
Appr by
041Q
NO.
Designed/drawn by Checked
Rev.
12x Q32
041Q
Appr by Revision Date comprises
Approved
TPN T"P4 N
NO.
Sign.
Revision comprises
T. Mann Checked
Weld Forge Drawingcoarse No. Rev.tol SS ISO 1101 Drawing No. SS-ISO 2768-1 2008-12-17 Form & position Date Data nr./Comp No.roughness ISO Blad/Sheet G. Kopplin 4" NPT Male / 4" NPT Approved Male T. Mann Surface 1302 E Male D85854401 1 /Male 1 2008-12-17 Form & Male position tol SS 4" Data nr./Comp Blad/Sheet ISO 1101 D02704401-1 4" NPT /Appr 4"byNPT NPT / 4" NPTNo.Male T. Mann Date Sign. D85854401 Drawing No. Rev. 1 /1
noitamrofn i yrateirpo p sniatnoc stnetnoc s gniward sih ntoiitaro dec T .ecitoN roirsptneehtmtrofniudyorartpeeirrproop sdneisau eb tnocuosthitirwo ,tr tnoc gtnoiw nalrldahs dna decaup n sihT .ecito BrA N oirkpinekhetTtun doriperro reolodhew s ni onhatM iw e,thrtapfoni t u ebdetosnollclsahids dna rnoecenloohcwnnet BA kinkeT i tdierswolcsid nnaM eht
Sign.
te
Swivel
D02704401-1 Swivel
TPN "4
20 20 Working Pressure: 150 D85854401 psi (10 bar)-1800 psi (125 bar) 4" Swivel of combinations 4" Swivel Illustrations 4" Swivel D85854401 D85854401 172 D17174401-1 20 4" Swivel 4" Swivel One side Other Other sideOneOne Compact version 20 One side Other side version One side Other side One 172 Other side 172 One Other side D17174401-1 D17174401-1 One side Other sideCompact side Other side 4" side Swivel side Other side Compact version 4" Swivel One side side One side Other side Oneside side Other One side One side Otherside side One side Other side One side side side Other side D85854401 20combinations One side Other side One side Other We manufacture Swivels inOther different sizes, connections and materials onOther request! Illustrations of D85854401 ether side One Other side Otherside side One side One side side Other side One side One Other side side Other side 172 D17174401-1 D85854401 Illustrations of combinations 172 D17174401-1 **)) *) Victaulic Victaulic Victaulic Victaulic * ) *) *) Flange Flange Flange Flange Weld end end Weld end Weld Weld end ) 172 D17174401-1 Victaulic Victaulic Other side Flange Flange Weld end Weld end One side sideOne Other side One side Other side ange One sideThread Other *sideside Flange Flange Weld end Weld end One side Other side One Other side We manufacture Swivels in different sizes, connections and materials on request! ) ) One side Other side One side Other side Com Thread BSP/NPT Flange Flange side Other side One side Other * * One side Other side One side Other side BSP/NPT Flange Flange Flange Weld end Thread Flange Flange Flange Victaulic One side Other side OneFlange side Other side Flange Flange Flange Oneside side Other Other side Compac Weld end* Victaulic* Weld end Other Weld Weld end end Weldand end One side side We manufacture Swivels in different sizes, connections materials onside request! side Other side One Other side One One side ) 2 : end Flange Thread Flange *)end *) Weld end *) ) 1Weld Flange Flange Weld Weld Flange Flange Flange ( end ) BSP/NPTBSP/NPT Thread Flange Flange Weld end Victaulic Flange Thread Other side Flange One BSP/NPT F BSP/NPT F side BSP/NPT F BSP/NPT Mend Thread Weld end Weld Weld BSP/NPT M Weld BSP/NPT M side Victaulic Victaulic**) *) * Flange Flange Flange side Other side Victaulic One Other side One side Other side One Weld end endend Other side One side Other side One side Other side One side Other side One side G. Kopplin 4" Swivel Approved
Drawing No.
Rev.
NO. NO.
Notice. This drawing contains poprietary information and shall not be used or reproduced or its contents disclosed in whole or in part, without the prior written concent of the Mann Teknik AB
.veR
.ng
.oN pmoC./o.N gniwarDiS rn ataD
W60447171 W6 044D7171D W604471 71D
.oN gniwar D
Detail No:
D9090K4401W 2" weld end 60
Flange lairetaM
751
:oN liateD
devorppA ytuDnnyaMv.T a eH "4 levi vSsesirpmoc noisive yN TP tu"D R .ON 4 -yTvPaNe"H 4 :"n4oilte vnivnS ce oC TPN "4 - pressure: Working 80 bar / 1140 psi TPN "4 :n yb rp oitcennoC Test pressure: 135 bar / 1920 psi pA yb rppA Axial force: 7,5 t
Material
Designed/drawn by Checked
Scale:
G. Kopplin
G. Kopplin Approved T. Mann
1:4 Date
2008-05-16
Swivel *) 8" - Double Ball Race NO.
Revision comprises
Date
Sign.
Appr by
Swivel Joints
D9393K4401W 3" weld end 89
gk 3,7 :thgieW
D9090K4401W 2" weld end 60
tnemtaerT/.h ebtY
ot c c a s ec n .ngiS ar e l ot o n ht etaD muide m 1-867 i w n oi s n e mi D 2 O SI-SS :elacS Weight: esra120 oc 1-kg de n 867 2 O SI-SS .ngiS sesirpmoc ihca M etaD 1:1 egroFnoidsilveeW R .ON 2 0 3 1 O SI s s e nh g u o r e c a 1 01 1 O S I S S etaD lot nsoeistirispmoopc noisivferRuS .ON Ytbeh./Treatment & mroF 92-5 teehS/dalB 0-9002 Dimension with no tolerances acc to 1 / pressure: .oN / 1 pmo1140 C/.rn atapsi Working W604480 D Machined SS-ISO 2768-1 medium 585bar 8D .veR coarse Weld Forge SS-ISO 2768-1 Test pressure: 135 bar /.oN1920 psi gniwarD Surface roughness ISO 1302 Axial force: 7,5 t Form & position tol SS ISO 1101 Data nr./Comp No.
Detail No: D1301304401W Material
1-W604458
Blad/Sheet
Or other connection on request
Flange 8" ANSI 600 - Ring Joint R49
Victaulic*)
751
Victaulic
:oN liateD
lairetaM
00
etaD2
Drawing No.
D1301304401W-1
1 /1
Designed/drawn by Rev. G. Kopplin Checked G. Kopplin Approved T. Mann
lairetaM
yb nward/den giseD grebyN .P dekcehC nilppoK .G devorppA nnaM .T
gk 3,7 :thgieW
:oN liateD
tnemtaerT/.h ebtY tnemtaer
T/.hebtY ot c c a s ec n ar e l ot o n ht mu id e m 1 - 8 6 i w n oi s n e mi D 7 2 O SI-SS Weight: esra120 oc 1-kg d e ni h c a M 867 2 O SI-SS e g r o F dl e W 2 0 3 1 O SI s s e nh g u o r e c a 1 01 1 O S I S S lot noitiNsoppmoC/.rfnruS Ytbeh./Treatment & mraotFaD teehS/dalB Dimension with no tolerances acc to 1/ 1 W60445858D .oN pmoC/.rn ataD Machined SS-ISO 2768-1 medium . v e R Weld Forge SS-ISO 2768-1 coarse .oN gniwarD Surface roughness ISO 1302 Form & position tol SS ISO 1101
ytuD yvaeH
"4 levivS
58D elam TPN "4 - elam TPN *) Or other connection "4 daerhT
on1:4request
Scale:
Date
2008-05-16
O- Double Ball Race Swivel) 8"
Data nr./Comp No.
W 1-W604458O ) 58D
Blad/Sheet
:elacS
1:1
:elacS etaD etaD
92-50-9002 yb rppA
NO.
Swivels Swivel Joints
Revision comprises
Date
Sign.
Appr by
Flange 8" ANSI 600 - Ring Joint R49
D1301304401W
Drawing No.
D1301304401W-1
Rev.
1 /1
yb nward/den gis
eD
yb nward/den degkisceeDhC grebyN .P ddeevkocerphpCA nilppoK .G devorppA nnaM .T
lairetaM lairetaM
:oN liateD :oN liateD
ytuD yvaeHetaD "4 levivS
sesirpmoc no isiveR
yb rppA
* Or other connection on request Vulkollan® is registered trademark of Bayer AG yb rppA
6 Viton® and Teflon® are registered trademarks of DuPont, DuPont Elastomers. D1581584401W DuPont Elastomers. Viton® and Teflon® are registered trademarks of DuPont, Vulkollan® is registered trademark of Bayer AG 48
Swivels Swivels Swivel Joints Swivel Joints
The swivel joint are designed66 for slow rotary motions. 1½" weld end
D1581584401W 1½" weld end 48
.ngiS
elam TPN "4 - elam TPN * Or other connection "4 daerhT
* Or other Vulkollan® D1581584401W DuPont Elastomers. Viton® and Teflon® are registered trademarks of DuPont, is registered trademarkon of Bayer AG connection on request request 48 1½" weld end
Q190,5
1/ 1
D1581584401W 1½" weld end 48
041Q
Flange 438
H "4 leviv S
PN "4 :no itcennoC
One side Other side Compact version Swivels Swivels Swivels Weld end Weld end* We d end We d end Swivels Weld end Weld end *) 3" NPT
TPN "4 - T
D9393K4401W 3" weld end 89
ne
mtaerT/.he ot c c a s e btY c n ar e l ot o mu id e m 1 n h ti w n o 867 2 O SIi s n em SS tnem es r a o c 1 :elacS taerT/.hdeebnih iD yb nward/ ot cc8a67s2e OSI-SS tYcaM dengiseD c n ar e l mu id e m 1 1:1 grebyN .P 867 2031 OSot on htiw engroF dleW iD esraoc 1- 10211OSOIS-ISS I ssenhguoor isenceam :elacS fr 8 6 7 2 O S I - S S l ot n yb nward/ dekcehC etaD oitisodpen&ihcaMuS SS dengiseD nilp teehS/d2al0B3 roF 70-11:11 egroF dlm .G 1 O SI s s e grebypNoK eW -8002 .P 1/ 1 nhg.ouNo 1011 OSIWS6 devor S044lo7t17n1Doit prmoeCc/a.rfnruaS ta dekcehpCpA etaD nn yb rppA isop & mroF D nilppoKaM.G .T tee.vheSR/dalB 70-11-8
D1301304401W-1
Rev.
noitamrofni y rat stnetnoncoitsatimrofnieiyrrpaotpeisrnpioatnoc gniward sihT .ecitoN ro decudo p sniatno st ard sihT .ecit roinreptneohct stutio ro drepceurdorropedresu ecb gtnoiw roirp ehhttitwuo,trap ni roroelodhesu nebllatohns ldlnaah oN BA kinkeT nhntiw ,trap ni row ni desolcsid s dna BA kinkeaTM nenht fo tnecenloohcwn ni desolcsid aM eht fo tn ettirw ecnoc nettirw
D
g:okN l0ia6te,6D :th gieW gk 06,6 :th gieW t
Drawing Rev. end 48 No. Appr by Date1½" weld Sign. D1581584401W D1581584401W 1½" weld end 48 1½" weld end 48
Revision comprises
TPN "4
.oN gniwar D
60447171
751
lairetaM
1NO. /1
Rev.
Notice. This drawing contains poprietary information and shall not be used or reproduced or its contents disclosed in whole or in part, without the prior written concent of the Mann Teknik AB
yb nward/ dengiseD grebyN .P
dekcehC nilppoK .G devorppA nnaM .T
Blad/Sheet Rev.
041Q
:elacS
etaD
D1241256606W
Drawing No.
noitamrofni y rateirpop sni atnoc gniwar stnetnoc sti d sihT .ecitoN ro decudorpe r ro desu eb r oi r p e h t t u o ton llahs dna htiw ,trap ni ro elohw ni d BA kinkeT nn esolcsid aM eht fo tn ecnoc nettirw
1:1
70-11-8002
Data nr./Comp Drawing No. No.
TPN "4
.oN pmoC/. rn ataD
Appr by
Appr by
Q190,5
W60447171 D
Sign.
Sign.
Head Width 100 Q110
Swivel Joints
.veR
Date
Date
3" NPT
1/ 1
Revision comprises
Revision comprises
TPN "4
tnemtaer
T/.hebtY ot c c a s e c n ar e l ot o mu id e m 1 n h ti w n o 867 2 O SIi s n e mi D SS es r a o c 1 867 2 O SId e ni h c a M SS e g r o F dl e 2 0 3 1 O SI W s s e nh g u o 1 01 1 O S I S S l o t n oi t r e c a f r u S i s o p & mr teehS/dalB oF
Swivels Swivels
NO.
NO.
031 htdiW da eH
gk 06,6 :th gieW
Head Width 100 Q110
Notice. This drawing contains poprietary information and shall not be used or reproduced or its contents disclosed in whole or in part, without the prior written concent of the Mann Teknik AB
Revision comprises
TPN "4
s
NO.
041Q 041Q TPN "4 TPN "4
Q32 Swivel 5" -Female Double Race Viton® Teflon® are registered trademarks of DuPont, DuPont Elastomers. Vulkollan® is registered trademark of Bayer 1 / 1 of DuPont, *12xofOr other connection * Or other connection Viton®trademarks and Teflon® of areDuPont, registered trademarks of DuPont, DuPont Elastomers. Vulkollan® is registered trademark of Bayer AG DN100 5" NPT / 5"Ball NPT Male ered DuPont Elastomers. Vulkollan® isDuPont registered trademark Bayer AG 3" BSP Female / DN80 PN10/16 D1241254406W Viton® andand Teflon® areD39394401-1 registered trademarks DuPont Elastomers. Vulkollan® is registered trademark of Bayer AGAG Swivel 4" Flange DN100 PN10/16 D1436B4415A ion comprises Date Sign. registered Appr by Flange PN10/16 Viton® andTeflon® Teflon® are trademarks ofof DuPont, Elastomers. Vulkollan® is registered trademark of 5"Bayer AGBayer NO. Revision comprises DateAppr Appr is by of eflon® are Viton® registered and trademarks are registered of DuPont, trademarks DuPont Elastomers. DuPont, DuPont Vulkollan® Elastomers. is registered Vulkollan® trademark registered Bayer AG trademark of AG D39394401-1 Flange DN100 PN10/16 Drawing No. Rev. NPT Female / 5" NPT Male NO. Revision comprises Date Sign. by Sign. D1241254406W One side Other side Compact version Flange DN100 PN10/16 Flange DN100D39394401-1 PN10/16 One side Other side D39394401-1 side Viton® and Teflon® are registered trademarks of DuPont, DuPont Elastomers. Vulkollan® is registered trademark of Bayer AG NO. NO. Revision comprises Date One by D39394401-1 NO. Revision comprises Revision comprises Date on request Sign. ApprDate bySign. Sign.ApprOther Appr side by on request 6 DuPont, DuPont Elastomers. Vulkollan® is registered trademark of Bayer AG 62 gistered trademarks of DuPont, DuPont Elastomers. Vulkollan® is registered trademark of Bayer AG Viton® and Teflon® are registered trademarks of 6 Flange DN100 PN10/16 ) D39394401-1 NO.Flange Revision comprises Flange Date Sign. Appr *)by Victaulic Victaulic * 6 Weld end Weld end Swivel Joints One side Other side One side Other side Compact version 438 Swivels One s de O he s de Compact side 6 Other side version Swivels Swivel Joints One side Other side One wivel Joints One side Other side Swivel Joints 6 Swivel Joints Swivel Joints ytuD yvae 62 Flange Victaulic Victaulic*) Flange W
.ngiS .ngiS
.ON
etaD etaD
sesirpmoc no isiveR .ON sesirpmoc no isiveR .ON
Mento Hoses and Couplings Catalogue
2-224 Loading/Oil/Bulk Hoses and Accessories 24
Hose Lifter The Anson Hoselifter (Patented) was designed specifically for use with bulk handling hose. Constructed from forged steel or aluminium bronze and fully proof tested before despatch. The Anson Hoselifter is so reliable that it is used almost exclusively throughout the North Sea sector. Advantages 1. Simple to use
2. It is uniquely safe
Double Eye
Single Eye
Part Number
Size
Part Number
Size
10835
3"
10836
4"
10836-1
4"
10837
5"
10837-1
5"
10838
6"
10838-1
6"
Close/Swage Nipples NPT/BSP/WELD
Material: Carbon steel/galvanized steel/stainless steel. Close Nipple Part Number 92940-16 92940-32
Swage Nipple NPT Thread Size Sch Part Number 1" 40 92941-32-48-160 2"
40
92941-32-48-40
92940-32-32-XXH
2"
XXH 92941-32-64-160
92940-48-48-XXH
3"
XXH 92941-32-64-40
92940-64
4"
92940-64-64-XXH
4"
40
92941-48-64-160
XXH 92941-48-64-40
Space Nipple
Swage Nipple
NPT NPT Thread Thread Size Sch Part Size Sch Number 2" x 3" 160 SP20 2" 40 2" x 3" 40 SP30 3" 40 2" x 4" 160 SP40 4" 40 2" x 4" 40 SP50 5" 40 3" x 4" 160
Part Number
3" x 4"
Size
Sch
NPT20
2" NPT X 2" BW
40
NPT20SCH80
2" NPT X 2" BW
80
NPT20SS-10
2" NPT X 2" BW SS
10
NPT20SS-40
2" NPT X 2" BW SS
40
NPT30
3" NPT X 3" BW
40
NPT30SCH80
3" NPT X 3" BW
80
40
NPT30SS-10
3" NPT X 3" BW SS
10
3" NPT X 3" BW SS
40
92940-64GALV
4"
40
92941-48-80-40
3" x 5"
40
NPT30SS-40
92940-80
5"
40
92941-64-80-40
4" x 5"
40
NPT40
4" NPT X 4" BW
40
4" NPT X 4" BW
80
92940-80GALV Space Nipple Part Number 2059-48-48 2059-64-64 2059-80-80
5"
40
92941-64-96-40
4" x 6"
40
NPT40SCH80
92941-80-96-40
6" x 5"
80
NPT40SS-10
4" NPT X 4" BW SS
10
NPT40SS-40
4" NPT X 4" BW SS
40
NPT50
5" NPT X 5" BW
40
NPT50SCH80
5" NPT X 5" BW
80
NPT50SS-10
5" NPT X 5" BW SS
10
NPT50SS-40
5" NPT X 5" BW SS
40
NPT60
6" NPT X 6" BW
40
NPT80
8" NPT X 8" BW
40
Bushing Male x Female NPT/ BSP NPT Thread Sch Thread Size Part Number Size Sch 3" x 3" 40 4x2 PTR-S 4" x 2" 4" x 4" 40 4x3 PTR-S 4" x 3" 5" x 5" 40 5x4 PTR-S 5" x 4"
Mento Hoses and Couplings Catalogue
2-25. Loading/Oil/Bulk Hoses and Accessories 25
Anson Hammer Lug Unions Pressure rating (psi) Fig. No
Standard Service Cold Working
50
inches mm
Nominal Pipe Size
Sour Gas Service
TEST
Cold Working
TEST
500
750
N/A
N/A
100
1,000
1,500
N/A
N/A
200
2,000
3,000
2,000
3,000
206
2,000
3,000
2,000
3,000
207
2,000
3,000
2,000
3,000
600
6,000
9,000
N/A
N/A
602
6,000
9,000
6,000
9,000
1002
10,000
15,000
7,500
11,250
1003
10,000
15,000
7,500
11,250
1004
10,000
15,000
7,500
11,250
1502
15,000
22,500
10,000
15,000
2002
20,000
30,000
N/A
N/A
2202
N/A
N/A
15,000
22,500
Hammer Lug Unions see cap. 15
1 25
1 1/4 32
1 1/2 40
2 50
2 1/2 65
3 80
4 100
5 125
6 150
8 200
Mento Hoses and Couplings Catalogue
2-26. Loading/Oil/Bulk Hoses and Accessories 26
Flanges
C
Part No. Description Part No. Description 4000001004 4000101008 FLANGE 1" WN 150LBS RF SCH 40 A105 FLANGE 1" WN 300LBS RF SCH 80 A105 4000002004 4000102008 FLANGE 2" WN 150LBS RF SCH 40 A105 FLANGE 2" WN 300LBS RF SCH 80 A105 DRILLING RF DRILLING DIAMETER 4000003004 4000103008 FLANGE 3" WN 150LBS RF SCH 40 A105 FLANGE 3" WN 300LBS SCH 80 A105 DIAMETER OF HUB DEPTH DEPTH 4000004004 4000104008 FLANGE 4" WN 150LBS RF SCH 40 A105 FLANGE 4" WN 300LBS RFDIA. SCH OF OF OF OF 80 A105 DIA. BORE BORE BORE BORE LENGTH TRU LENGTH HUBLENGTH TRU HUB TRU LENGTH HUBTRU HUB NO. OF NO.OFOF AT AT DIA. DIA. OF SOCKET AT SOCKET BOLT BOLT 4000005004 4000105008 NPS FLANGE FLANGE 5" WN 150LBS RF SLIP-ON SCH 40 A105 SCH A105 WELDINGWELDING WELDING WELDING &SLIP-ON SLIP-ON & SLIP-ON & & HOLES 300LBS HOLESRFCIRCLE BASE BASE HOLES HOLES 80 CIRCLE CHAMFER NPS 5" WN NECK & NECK &NECK & NECK &LAP SOCKET FLANGE FLANGE FLANGE FLANGE FLANGE FLANGE FLANGE FLANGE SOCKET WELD SOCKET SOCKET WELD WELD SLIP-ON, SLIP-ON,SLIP-ON,SLIP-ON, DN RAISED RAISED RAISED RAISED LAP WELD LAP LAP ML J NM DN LK KJ 4000006004 4000106008 FLANGE 6"FACE WNTHICKNESS 150LBS RFFACE SCH 40SOCKET A105 6" WN 300LBS RF SCH 80 A105 SOCKET SOCKET THICKNESS THICKNESS THICKNESS OUTSIDE OUTSIDE OUTSIDE OUTSIDE SOCKET SOCKETJOINT SOCKET WELDING WELDING THREADED WELDING THREADED &WELDING THREADED & FLANGE THREADED &LAP &LAP LAP LAP FACE FACESOCKET JOINT JOINT JOINT 1/2 1/2 4 .624 2.38 .62 .38 2.38 1.19 .38 .84 1.19 WELDING WELDING DIAMETERDIAMETER DIAMETER MIN. DIAMETER MIN. DIA.MIN. DIA. MIN. DIA.WELDING MIN. WELDING MIN. MIN. MIN. NECKMIN.NECK SOCK. WELD SOCK. NECK WELD SOCK. WELD SOCK. WELD JOINT JOINT JOINT JOINT NPS MIN. MIN.NECK 4000008004 4000108008 FLANGE 8" WN 150LBS RFBDIA. SCH 40 MIN. A105 FLANGE 300LBS 15 8" WN 4 15 164 RF SCH 60.3 16 80 A105 10 60.3 30.2 10 21.4 30.2 B TOA T O C GF HG HG H H A TB A A CB DN DN DN O TDNO D C DCF D F D G F 3/4 3/4 4 .624 2.75 .62 .44 2.75 1.50 .44 1.05 1.50 4002001000 4002101000 1" SLIPON FLANGE 150LBS A105.90.88 1" SLIPON FLANGE 300LBS RF A105 1/2 3.50 3.50FLANGE .443.50 .44 3.50 1.38 .44 1.38.44.62 1.38 .62 1.38 .88 .62 .88 .62RF .90.88 1.88 .90 1.88 .90 .62 1.88 .62 1.88 .62 .62 FLANGE .62 .62 .62 20 4 20 164 69.8 16 11 69.8 38.1 11 26.6 38.1 15 15 89 1589 FLANGE 11.5 15 89 11.5 89 34.9 11.5 34.9 11.5 15.8 34.9 15.8 34.922.2 15.8 22.2 15.8RF 22.9 22.2 22.9 22.2 47.622.9 47.6 22.9 16 47.6 16 47.6 116 16 FLANGE 16 1 162" SLIPON 16 4 .624 3.12 .62 .50 3.12 1.94 .50 1.32 1.94 4002002000 4002102000 2" SLIPON FLANGE 150LBS A105 FLANGE 300LBS RF A105 3/4 3.88 3.88 .503.88 .50 3.88 1.69.50 1.69.50.82 1.69 .82 1.691.09 .82 1.09 .82 1.11 1.09 1.11 1.09 2.061.11 2.06 1.11 .62 2.06 .62 2.06 .62 .62 .62 .62 .62 25 4 25 164 79.4 16 13 79.4 49.2 13 33.5 49.2 4002003000 4002103000 3" 13.0 SLIPON FLANGE 150LBS FLANGE 300LBS RFA105 20 20 98 2098 FLANGE 13.0 20 98 13.0 98 42.9 42.9 13.0 20.8 42.9 20.8 42.927.8 20.8 27.8 20.8RFA105 28.2 27.8 28.2 27.8 52.428.2 52.4 28.2 16 52.4 16 52.4 116 16 16 1 1/4163" SLIPON 16 1/4 FLANGE 4 .624 3.50 .62 .56 3.50 2.31 .56 1.66 2.31 1 4.25 4.25FLANGE .564.25 .56 4.25 2.00 .56 2.00.56 1.05 2.00 1.05 2.001.36 1.05 1.36 1.05RF 1.38 1.36 1.38 1.36 2.191.38 2.19 1.38 .69 2.19 .69 2.19 .69 .69 FLANGE .69 .69 .69 32 4" SLIPON 4 32 164 88.9 16 14 88.9 58.7 14 42.1 58.7 4002004000 4002104000 4" SLIPON FLANGE 150LBS A105 FLANGE 300LBS RF A105 1/2 4 .624 3.88 .62 .62 3.88 2.56 .62 1.90 2.56 25 108 25 2510814.5 25 108 14.5 108 50.814.5 50.8 14.5 26.7 50.8 26.7 50.834.5 26.7 34.5 26.734.9 34.5 34.9 34.5 55.634.9 55.6 34.9 17 55.6 17 55.6 117 17 17 1 1/217 17 4002005000 4002105000 40 5" SLIPON 4 40 164 98.4 16 16 98.4 65.1 16 48.3 65.1 5" SLIPON FLANGE 150LBS A105 FLANGE 300LBS RF A105 1 1/4 4.62 4.62FLANGE .624.62 .62 4.62 2.50 .62 2.50.62 1.38 2.50 1.38 2.501.70 1.38 1.70 1.38RF 1.72 1.70 1.72 1.70 2.251.72 2.25 1.72 .81 2.25 .81 2.25 .81 .81 FLANGE .81 .81 .81 2 2 4 .75 4 4.75 .75 .69 4.75 3.06 .69 2.38 3.06 32 117 32 32117FLANGE 16.0 32 117 16.0 117 63.5 63.5 16.0 35.1 63.5 35.1 63.543.2 35.1 43.2 35.1RF 43.7 43.2 43.7 43.2 57.143.7 57.1 43.7 21 57.1 21 57.1 21 21 FLANGE 21 21 21 4002006000 4002106000 6" 16.0 SLIPON FLANGE 150LBS A105 FLANGE 300LBS RF A105 50 6" SLIPON 4 50 204 120.6 20 17 120.6 77.6 17 60.4 77.6 1 1/2 5.00 5.00 .695.00 .69 5.00 2.88.69 2.88.69 1.61 2.88 1.61 2.881.95 1.61 1.95 1.611.97 1.95 1.97 1.95 2.441.97 2.44 1.97 .88 2.44 .88 2.44 .88 .88 .88 .88 .88 2 1/2 2 1/2 4 .75 4 5.50 .75 .75 5.50 3.56 .75 2.88 3.56 4002008000 4002108000 8" 17.5 SLIPON FLANGE 150LBS A105 FLANGE 300LBS RF A105 40 127 40 40127FLANGE 17.5 40 127 17.5 127 73.0 73.0 17.5 40.9 73.0 40.9 73.049.5 40.9 49.5 40.9RF 50.0 49.5 50.0 49.5 61.950.0 61.9 50.0 22 61.9 22 61.9 22 22 FLANGE 22 228" SLIPON 22 65 4 65 20 4 139.7 20 19 139.7 90.5 19 73.0 90.5 2 6.00 6.00 .756.00 .75 6.00 3.62.75 3.62.75 2.07 3.62 2.07 3.622.44 2.07 2.44 2.072.46 2.44 2.46 2.44 2.502.46 2.50 2.46 1.00 2.50 1.00 2.50 1.00 1.00 1.00 1.00 1.00 4003001000 4003101000 FLANGE 1" SCREWED-ON 150LBS RF A105 FLANGE 1" SCREWED-ON 300LBS RF A105 3 3 4 .754 6.00 .75 .81 6.00 4.25 .81 3.50 4.25 50 152 50 5015219.5 50 152 19.5 152 92.119.5 92.1 19.5 52.6 92.1 52.6 92.161.9 52.6 61.9 52.662.5 61.9 62.5 61.9 63.562.5 63.5 62.5 25 63.5 25 63.5 25 25 25 25 25 80 4 80 204 152.4 20 21 152.4 107.9 21 88.9 107.9 4003002000 4003102000 2" SCREWED-ON RF2.97 A105 300LBS RF A1054.812 1/2 7.00 7.00FLANGE .887.00 .88 7.00 4.12 .88 4.12.88 2.47 4.12 2.47 4.12150LBS 2.94 2.47 2.94 2.47 2.94 2.97 2.94 2.752.97 2.75 2.97 1.12 2.75 1.12 2.75 1.12 1.12 FLANGE 1.12 1.122" SCREWED-ON 1.12 3 1/2 3 1/2 8 .758 7.00 .75 7.00 4.00 4.81 65 178 65 6517822.5 65 178 22.5 178 104.8 22.5 104.8 22.5 62.7 104.8 62.7 104.874.6 62.7 74.6 62.775.4 74.6 75.4 74.6 69.875.4 69.8 75.4 29 69.8 29 69.8 29 29 29 29 29 90 8 90 208 177.8 20 177.8 - A105122.2 101.6 122.2 4003003000 4003103000 FLANGE 3"SCREWED-ON 150LBS RF A105 FLANGE 3" SCREWED-ON 300LBS RF 3 7.50 7.50 .947.50 .94 7.50 5.00.94 5.00.94 3.07 5.00 3.07 5.003.57 3.07 3.57 3.073.60 3.57 3.60 3.57 2.753.60 2.75 3.60 1.19 2.75 1.19 2.75 1.19 1.194 1.19 1.19 41.19 8 .758 7.50 .75 7.50 5.31 4.50 5.31 4003004000 4003104000 4" 24.0 SCREWED-ON 150LBS RF91.4 A105 300LBS RF 80 191 80 80191FLANGE 24.0 80 191 24.0 191 127.0 127.0 24.0 78.0 127.0 78.0 127.0 90.7 78.0 90.7 78.0 90.7 91.4 90.7 69.891.4 69.8 91.4 30 69.8 30 69.8 30 30 FLANGE 30 100 304" SCREWED-ON 30 8 100 208 190.5 20 190.5 - A105134.9 114.3 134.9 3 1/2 8.50 8.50 .948.50 .94 8.50 5.50.94 5.50.94 3.55 5.50 3.55 5.504.07 3.55 4.07 3.554.10 4.07 4.10 4.07 2.814.10 2.81 4.10 1.25 2.81 1.25 2.81 1.25 1.255 1.25 1.25 51.25 FLANGE 8 .888 8.50 .88 8.50 - A1056.44 5.56 6.44 4003005000 4003105000 FLANGE 5" SCREWED-ON 150LBS RF A105 5" SCREWED-ON 300LBS RF 90 216 90 9021624.0 90 216 24.0 216 139.7 24.0 139.7 24.0 90.2 139.7 90.2 139.7 103.4 90.2 103.4 90.2104.1 103.4 104.1 103.4 71.4104.171.4 104.1 32 71.4 32 71.4 32 32 32 125 32 32 8 125 238 215.9 23 215.9 163.5 141.3 163.5 4003006000 4003106000 6" SCREWED-ON 150LBS RF4.60 A105 300LBS RF 4 9.00 9.00FLANGE .949.00 .94 9.00 61.9 .94 61.9.94 4.03 61.9 4.03 61.9 4.57 4.03 4.57 4.03 4.57 4.60 4.57 3.004.60 3.00 4.60 1.31 3.00 1.31 3.00 1.31 1.316 1.316" SCREWED-ON 1.31 61.31 FLANGE 8 .888 9.50 .88 9.50 - A1057.56 6.63 7.56 100 100 229 10022924.0 100 229 24.0 229 157.2 157.2 24.0 102.4 157.2 102.4 157.2 116.1 102.4 116.1 102.4 116.1 116.8 116.1 76.2116.876.2 116.8 33 76.2 33 76.2 33 33 33 150 33 33 8 150 238 241.3 23 241.3 168.3 192.1 4003008000 4003108000 FLANGE 8" 24.0 SCREWED-ON 150LBS RF116.8 A105 FLANGE 8" SCREWED-ON 300LBS RF A105192.1 81.44 8 .888 11.75 .88 11.75 9.69 8.63 9.69 5 10.00 10.00.94 10.00 .94 10.00 7.31.94 7.31.94 5.05 7.31 5.05 7.315.66 5.05 5.66 5.055.69 5.66 5.69 5.66 3.505.69 3.50 5.69 1.44 3.50 1.44 3.50 1.44 1.448 1.44 1.44 8 200 ANSI 238 300LBS 298.4 23 RF 298.4 -A105 246.1 219.1 246.1 4004001000 4004101000 1" 24.0 BLIND ANSI 150LBS A105 125 125 254 125254FLANGE 24.0 125 254 24.0 254 185.7 185.7 24.0 128.3 185.7 128.3 185.7 143.7 128.3 RF 143.7 128.3 144.5 143.7 144.5 143.7 88.9144.588.9 144.5 36 88.9 36 88.9 36 36 FLANGE 36 200 361" BLIND 36 10 10 12 1.00 12 14.25 1.00 14.25 12.00 10.75 12.00 6 11.00 11.001.00 11.00 1.00 11.00 8.501.00 8.50 1.00 6.07 8.50 6.07 8.506.72 6.07 6.72 6.076.75 6.72 6.75 6.72 3.506.75 3.50 6.75 1.56 3.50 1.56 3.50 1.56 1.56 1.56 1.56 1.56 4004002000 4004102000 FLANGE 2" 25.5 BLIND ANSI 150LBS RF154.2 A105 FLANGE 2" BLIND 12 250 ANSI 2612 300LBS 361.9 26 RF 361.9 -A105 304.8 273.0 304.8 150 150 279 15027925.5 150 279 25.5 279 215.9 215.9 25.5 154.2 215.9 154.2 215.9 170.7 154.2 170.7 171.4 170.7 171.4 170.7 88.9171.488.9 171.4 40 88.9 40 88.9 40 40 40 250 40 40 12 12 1.00 12 300LBS 17.00 1.00 RF 17.00 -A105 14.38 12.75 14.38 8 13.50 13.50 1.12 13.50 1.12 13.50 10.62 10.62 1.12 7.98 10.62 7.98 10.62 8.72 7.98 RF 8.72 7.98 8.75 8.72 8.75 8.72 4.008.75 4.00 8.75 1.75 4.00 1.75 4.00 1.75 1.75 FLANGE 1.7512 1.753" BLIND 1.75 4004003000 4004103000 FLANGE 3" 1.12 BLIND ANSI 150LBS A105 ANSI 12 300 2612 431.8 26 431.8 365.1 323.8 365.1 200 200 343 20034329.0 200 343 29.0 343 269.9 29.0 269.9 29.0 202.7 269.9 202.7 269.9 221.5 202.7 221.5 202.7 222.2 221.5 222.2 221.5 101.6 222.2101.6 222.2 44 101.6 101.6 44 44 44 44 300 44 44 4004004000 4004104000 FLANGE 4" BLIND ANSI 150LBS RF A105 4" BLIND ANSI 14 FLANGE 14 12 1.12 12 300LBS 18.75 1.12 RF 18.75 -A105 15.75 14.00 15.75 10 16.00 16.001.19 16.00 1.19 16.00 12.75 1.19 12.75 1.19 10.02 12.75 10.02 12.75 10.88 10.02 10.88 10.02 10.92 10.88 10.92 10.88 4.0010.924.00 10.92 1.94 4.00 1.94 4.00 1.94 1.94 1.94 1.94 1.94 350 12 350 2912 476.2 29 476.2 400.0 355.6 400.0 250 250 406 250406FLANGE 30.5 250 406 30.5 406 323.8 323.8 30.5 254.5 323.8 254.5 323.8 276.2 254.5 RF 276.2 254.5 277.4 276.2 277.4 276.2 101.6 277.4101.6 277.4 49 101.6 101.6 49 49 49 FLANGE 49 495" BLIND 49 4004005000 4004105000 5" 30.5 BLIND ANSI 150LBS A105 ANSI 300LBS RF A105 16 16 16 1.12 16 21.25 1.12 21.25 18.00 16.00 18.00 12 19.00 19.001.25 19.00 1.25 19.00 15.00 1.25 15.00 1.25 12.00 15.00 12.00 15.00 12.88 12.00 12.88 12.00 12.92 12.88 12.92 12.88 4.5012.924.50 12.92 2.19 4.50 2.19 4.50 2.19 2.19 2.19 400 2.19 2.19 16 400 ANSI 2916 300LBS 539.7 29 RF 539.7 -A105 457.2 406.4 457.2 4004006000 4004106000 FLANGE 6" BLIND ANSI 150LBS RF A105 FLANGE 6" BLIND 300 300 483 30048332.0 300 483 32.0 483 381.0 32.0 381.0 32.0 304.8 381.0 304.8 381.0 327.0 304.8 327.0 304.8 328.2 327.0 328.2 327.0 114.3 328.2114.3 328.2 56 114.3 114.3 56 18 56 56 56 18 56 56 16 1.25 16 22.75 1.25 22.75 19.88 18.00 19.88 14 21.00 21.00 1.38 21.00 1.38 21.00 16.25 16.25 1.38 16.25 16.25 14.14 RF 14.14 14.18 14.14 14.18 14.14 5.0014.185.00 14.18 2.25 5.00 2.25 5.00 3.12 2.25 FLANGE 3.12 2.25 450 3.128" BLIND 3.12 4004008000 4004108000 FLANGE 8" 1.38 BLIND ANSI 150LBS A105 16 450 ANSI 3216 300LBS 577.8 32 RF 577.8 -A105 504.8 457.2 504.8 1
2
2
NPS
NPS
NPS
1/2
1/2
1/2
3/4
3/4
3/4
1
1
1
1 1/4
1 1/4 1 1/4
1 1/2
1 1/2 1 1/2
2
2
2 1/2
2 1/2 2 1/2
3
3
3 1/2
3 1/2 3 1/2
4
4
4
5
5
5
6
6
6
8
8
8
10
10
10
12
12
12
14
14
14
16
16
16
2
2
18 20 24 1
2 3
3
350 16 400 18 450 20 500 24 600
350 535 23.50 400 595 25.00 450 635 27.50 500 700 32.00 600 815
35053535.0 350 535 23.501.44 23.50 40059537.0 400 595 25.001.56 25.00 45063540.0 450 635 27.501.69 27.50 50070043.0 500 700 32.001.88 32.00 60081548.0 600 815
3
3
1
1
2
2
2
3
3
3
1
2
3
35.0 535 412.8 35.0 412.8 35.0412.8 412.8 359.2 359.2360.2 359.2 To be To be To be To be 1.44 23.50 18.50 1.44 18.50 1.4418.50 18.50 16.16 16.1616.19 16.16 37.0 595 469.9 37.0 469.9 37.0469.9 469.9 410.4 410.4411.2 410.4 specifiedspecified specifiedspecified 1.56 25.00 21.00 1.56 21.00 1.5621.00 21.00 18.18 18.1818.20 18.18 40.0 635 533.4 40.0 533.4 40.0533.4 533.4 461.8 461.8462.3 461.8 by by by by 1.69 27.50 23.00 1.69 23.00 1.6923.00 23.00 20.20 20.2020.25 20.20 43.0 700 584.2 43.0 584.2 43.0 584.2 584.2 513.1 513.1 514.3 513.1 purchaser purchaser purchaser purchaser 1.88 32.00 27.25 1.88 27.25 1.8827.25 27.25 24.25 24.2524.25 24.25 48.0 815 692.2 48.0 692.2 48.0692.2 692.2 615.9 615.9615.9 615.9
360.2 359.2 127.0 360.2127.0 360.2 57 127.0 16.19 16.16 5.0016.195.00 16.19 2.50 5.00 411.2 410.4 127.0 411.2127.0 411.2 64 127.0 18.20 18.18 5.5018.205.50 18.20 2.69 5.50 462.3 461.8 139.7 462.3139.7 462.3 68 139.7 20.25 20.20 5.6920.255.69 20.25 2.88 5.69 514.3 513.1 144.5 514.3144.5 514.3 73 144.5 24.25 24.25 6.0024.256.00 24.25 3.25 6.00 615.9 615.9 152.4 615.9152.4 615.9 83 152.4
4400001054 FLANGE 1" WN 150LBS RF SCH 40 SS316 18 18 4400002054 FLANGE 2" WN 150LBS RF SCH 40 SS316 20 20 4400003054 FLANGE 3" WN 150LBS RF SCH 40 SS316 4400004054 FLANGE 4" WN 150LBS RF SCH 40 SS316 24 24 4400005054 FLANGE 5" WN 150LBS RF SCH 40 SS316 4400006054 FLANGE WN 150LBS RFare SCH 40notSS316 Socket Welding Socket Socket Welding Flanges, Welding Socket Flanges, sizes Welding NPS Flanges, sizes 3 1/2 Flanges, NPS sizes (DN 3 NPS 90) 1/2 sizes (DN and 3 6" 1/2 NPS larger 90) (DN and 3 1/2 are 90) larger (DN not and 90) are larger and not larger not are covered covered by ASME/ANSI covered by4400008054 ASME/ANSI covered by B16.5. ASME/ANSI byB16.5. ASME/ANSI B16.5. B16.5.8" WN 150LBS RF SCH 40 SS316 FLANGE Includes Includes .06" (1.6 Includes .06" mm)(1.6 Includes raised .06" mm) (1.6 face. raised .06" mm) (1.6 face. raised mm)face. raised face. 4402001000 FLANGE 1"todiameters SLIPON FLANGE 150LBS RF SS316 These dimensions These These dimensions correspond dimensions These correspond dimensions to inside correspond to diameters inside correspond to diameters inside of pipe inside as of given pipe diameters of as inpipe given as ofinpipe givenasingiven in 4402002000 FLANGE 2"Thickness SLIPON FLANGE ANSI/ASME ANSI/ASME B36.10M ANSI/ASME B36.10M for ANSI/ASME Standard B36.10M for Standard Wall B36.10M forPipe. Standard Wall for Thickness Pipe. Standard Wall Pipe. of Wall Standard Thickness Pipe. of Standard Thickness of Standard of150LBS Standard RF SS316 Wall is the Wall same is Wall the as same Schedule is the Wall as same isSchedule 40 theas insame Schedule size40as NPS inSchedule size 40 10 in (DN NPS size 40 250) 10NPS in(DN and size 10 250) smaller. NPS (DNand 10 250) smaller. (DN and 250) smaller. and smaller.RF SS316 4402003000 FLANGE 3" SLIPON FLANGE 150LBS 4402004000 FLANGE 4" SLIPON• 6FLANGE • • 6 • 150LBS • 6 • • 6RF • SS316 4402005000 FLANGE 5" SLIPON FLANGE 150LBS RF SS316 4402006000 FLANGE 6" SLIPON FLANGE 150LBS RF SS316 4402008000 FLANGE 8" SLIPON FLANGE 150LBS RF SS316 4403001000 FLANGE 1" SCREWED-ON 150LBS RF SS316 4403002000 FLANGE 2" SCREWED-ON 150LBS RF SS316 4403003000 FLANGE 3" SCREWED-ON 150LBS RF SS316 4403004000 FLANGE 4" SCREWED-ON 150LBS RF SS316 4403005000 FLANGE 5" SCREWED-ON 150LBS RF SS316 4403006000 FLANGE 6" SCREWED-ON 150LBS RF SS316 4403008000 FLANGE 8" SCREWED-ON 150LBS RF SS316 4404001000 FLANGE 1" BLIND ANSI 150LBS RF SS316 4404002000 FLANGE 2" BLIND ANSI 150LBS RF SS316 4404003000 FLANGE 3" BLIND ANSI 150LBS RF SS316 4404004000 FLANGE 4" BLIND ANSI 150LBS RF SS316 4404005000 FLANGE 5" BLIND ANSI 150LBS RF SS316 4404006000 FLANGE 6" BLIND ANSI 150LBS RF SS316 4404008000 FLANGE 8" BLIND ANSI 150LBS RF SS316 1
2
2
3
2
2
127.0 57 20 79 57 2.50 5.00 3.44 2.50 127.0 64 24 87 64 2.69 5.50 3.81 2.69 139.7 68 97 68 2.88 5.69 4.06 2.88 144.5 73 103 73 3.25 6.00 4.38 3.25 152.4 83 111 83
79 57 20 79 3.44 2.50 500 3.44 87 64 24 87 3.81 2.69 600 3.81 97 68 97 4.06 2.88 4.06 103 73 103 4.38 3.25 4.38 111 83 111
79 20 3.44 20 500 87 20 20 600 3.81 97 4.06 103 4.38 111
1.25 20 3220
25.00 1.25 635.0 32
25.00 635.0 -
22.00 558.8 -
4400101058 FLANGE 1" WN 300LBS SCH 1.38 20 RF 29.50 1.38 80 SS316 29.50 26.12 3520 35 749.3 663.6 4400102058 FLANGE 2" WN 300LBS RF 749.3 SCH 80 SS316 4400103058 FLANGE 3" WN 300LBS RF SCH 80 SS316 4400104058 FLANGE 4" WN 300LBS RF SCH 80 SS316 4400105058 FLANGE 5" WN 300LBS RF SCH 80 SS316 4400106058 FLANGEPOUNDS 6" WN 300LBS RF SCH 80 SS316 POUNDS 4400108058 KILOGRAMS FLANGE 8" WN 300LBS RF SCH 80 SS316 • 7 • KILOGRAMS 4402101000 FLANGE 1" SLIPON FLANGE 300LBS RF SS316 4402102000 FLANGE 2" SLIPON FLANGE 300LBS RF SS316 INCHESINCHES INCHES INCHES 4402103000 FLANGE 3" SLIPON FLANGE 300LBS RF SS316 MILLIMETRES MILLIMETRES MILLIMETRES MILLIMETRES 4402104000 FLANGE 4" SLIPON FLANGE 300LBS RF SS316 4402105000 FLANGE 5" SLIPON FLANGE 300LBS RF SS316 4402106000 FLANGE 6" SLIPON FLANGE 300LBS RF SS316 4402108000 FLANGE 8" SLIPON FLANGE 300LBS RF SS316 4403101000 FLANGE 1"SCREWED-ON 300LBS RF SS316 4403102000 FLANGE 2" SCREWED-ON 300LBS RF SS316 4403103000 FLANGE 3" SCREWED-ON 300LBS RF SS316 4403104000 FLANGE 4" SCREWED-ON 300LBS RF SS316 4403105000 FLANGE 5" SCREWED-ON 300LBS RF SS316 4403106000 FLANGE 6" SCREWED-ON 300LBS RF SS316 4403108000 FLANGE 8" SCREWED-ON 300LBS RF SS316 4404101000 FLANGE 1" BLIND ANSI 300LBS RF SS316 4404102000 FLANGE 2" BLIND ANSI 300LBS RF SS316 4404103000 FLANGE 3" BLIND ANSI 300LBS RF SS316 4404104000 FLANGE 4" BLIND ANSI 300LBS RF SS316 4404105000 FLANGE 5" BLIND ANSI 300LBS RF SS316 4404106000 FLANGE 6" BLIND ANSI 300LBS RF SS316 4404108000 FLANGE 8" BLIND ANSI 300LBS RF SS316
Also available in other types of materials, dimensions classes and DIN standard.
20.00 22.00 508.0 558.8 24.00 26.12 609.6 663.6
•7•
Mento Hoses and Couplings Catalogue
2-27. Loading/Oil/Bulk Hoses and Accessories 27
Flange Gaskets
Studbolts for Flange Galvanized L7
Part No.
Description
0402000150010 Gasket Bluegard 1,5 mm for 1" 150 LBS RF Flange 0402000150020 Gasket Bluegard 1,5 mm for 2" 150 LBS RF Flange 0402000150030 Gasket Bluegard 1,5 mm for 3" 150 LBS RF Flange 0402000150040 Gasket Bluegard 1,5 mm for 4" 150 LBS RF Flange
0402000150050 Gasket Bluegard 1,5 mm for 5" 150 LBS RF Flange 0402000150060 Gasket Bluegard 1,5 mm for 6" 150 LBS RF Flange 0402000150080 Gasket Bluegard 1,5 mm for 8" 150 LBS RF Flange
Part No.
Description
L7G7SB2XN1/2"X65 Other types on request
Studbolt for 1" 150 LBS RF flange. 1/2" UNC x 65 mm c/w 2 nuts L7G7SB2XN5/8"X85 Studbolt for 2" 150 LBS RF flange. 5/8" UNC x 85 mm c/w 2 nuts L7G7SB2XN5/8"X90 Studbolt for 3"/4" 150 LBS RF flange. 5/8" UNC x 90 mm c/w 2 nuts L7G7SB2XN3/4"X95 Studbolt for5" 150 LBS RF flange. 3/4" UNC x95 mm c/w 2 nuts L7G7SB2XN3/4"X100 Studbolt for 6" 150 LBS RF flange. 3/4" UNC x 100 mm c/w 2 nuts L7G7ALL2XN3/4"X110 Studbolt for 8" 150 LBS RF flange. 3/4" UNC x 100 mm c/w 2 nuts
Other types on request