Parker hydraulic hoses

Mento Hoses and Couplings Catalogue

13.1. Parker Hydraulic Hoses

HPDE-GB_M07_Nr.40_27/07/98

Mento Hoses and Couplings Catalogue

13.1. Parker Hydraulic Hoses

Parker Hydraulic Hoses •

Overview

• • • • • • • • • • • • • • • • • • • • • •

301SN 421SN 492 492ST 692PU 462 462ST 462PU 463 372 372TC 701 721TC 731 P35 787TC 791TC/792TC 797TC H29 H31 R35 R35TC/RS35TC-48

13.1 13.1-1 13.1-2 13.1-3 13.1-4 13.1-5 13.1-6 13.1-7 13.1-8 13.1-9 13.1-10 13.1-11 13.1-12 13.1-13 5. EDITION

Mento Hoses and Couplings Catalogue

1

13.1-1. Parker Hydraulic Hoses

Overview Parker Hydraulic Hoses Medium pressure /VERVIEW

Parkrimp No-Skive Hose

Medium pressure /VERVIEW

Standard

Parkrimp No-Skive Hose

Standard

301SN

302

Ca-1

301SN Ca-3 421SN

302 Ca-9 Ca-1 422

Ca-11 Ca-3 421SN

Ca-9 422

Parkrimp No-Skive Medium No-Skive No-Skive pressure No-Skive No-Skive No-Skive No-SkiveHose No-Skive DIN EN 853 2SN – ISO 1436 Type 2 DIN EN 853 2SN – ISO S 1436 DIN ENEN 853 1SN – ISO 1436 Type 12 ISO 1436 1SN 2SN – ISO S 1436 DIN 853 2SN – ISO 1436 Type DIN EN 853 DIN EN 853 1SN – ISO 1436 Type 1 ISO 1436 1SN /VERVIEW 441 Ca-15 451 Ca-17 462 Ca-20 Ca-26 441 451 Ca-15492 Ca-17 462 Ca-20 492

Ca-11

No-Skive

Ca-26

Standard 301SN

302

Ca-1

Ca-3 421SN

No-Skive

No-Skive

ISO 11237 Type R16 – SAE 100R16

ISO 11237 Type R17 – SAE 100R17

No-Skive

Ca-9 422

Elite Compact No-Skive DIN EN11237 857 2SC ISO 11237 Type 2SC ISO Type– R16 – SAE 100R16

No-Skive

Ca-11

Elite Compact No-Skive DIN 857 1SC ISO 11237 Type 1SC ISOEN11237 Type– R17 – SAE 100R17

No-Skive

Elite Compact DIN EN 857 2SC – ISO 11237 Type 2SC

Elite Compact DIN EN 857 1SC – ISO 11237 Type 1SC

No-Skive

DIN EN 853 2SN – ISO– S 1436 EN 853 1SNabrasion – ISO 1436 Type 1 resistance ISO 1436 1SN High abrasion resistance MSHA DIN approved High – MSHA approved

DIN EN 853 2SN – ISO 1436 Type 2

441 301TC

451 Ca-15 Ca-2 351TC

No-Skive Tough Cover ISO 11237 SAE 100R16 DIN EN 853Type 2SN R16 – ISO– 1436 Type 2

462 Ca-17 301TC Ca-5 451TC

492 Ca-20 351TC/ 472TC Ca-18 Ca-2 471TC

Elite Compact Medium pressure No-Skive Tough Cover No-Skive Tough Cover DIN ENEN 857 2SC – ISO 11237 Type ISO 11237 Type R17 SAE 100R17 DIN 853 2SN – –ISO 1436 Type2SC 2

No-Skive Tough Cover R17 – SAE 100R19 100R17 ISO 11237 Type R19

/VERVIEW

Ca-26 Ca-23 Ca-5 451TC

Medium Elite Compact No-Skive No-Skive Tough pressure Cover 1SC 1SC DIN EN11237 857 2SC ISO 11237 Type 2SC ISO/VERVIEW Type– R19 – SAE 100R19

Ca-18 471TC / 472TC

No-Skive Tough Cover ISO 11237 Type R17 – SAE 100R17

351TC 492ST Compact hose with

Ca-21 -2 Ca

Ca-5 451TC 462ST Ca-27 463

463 / 472TC Ca-18 492ST Ca 493 Ca-21 -22471TC

1 or 2 steel wire braids as single or twin hose

2 steel wire braids as single or twin hose

Ca-23 Ca-22 493 Ca-27 Ca-28

Parkrimp No-Skive No-Skive HoseParkrim DIN EN 857 2SC – ISO 11237 Type 2SC

Ca-28

21.0 MPa

up to 42.5 MPa

Extreme abrasion resistance High abrasion resistance – MSHA approved cleaning Extreme abrasionWater resistance Water cleaning 692PU-No-Skive

462PU-No-Skive 301TC 462ST Compact hose with

Ca-23

Main applications t /P 4LJWF IPTF DPOTUSVDUJPO FI IPTF DPOTUSVDUJPO U UJ t /P 4LJWF IPTF DPOTUSVDUJPO F IPTF DPOTUSVDUJPO Parkrimp No-Skive Hose Medium pressure Parkrimp No-Skive Hose Parkrim Medium pressure Medium pressure Parkrimp No-Skive Medium pressure No-Skive Tough Cover No-Skive Tough Cover Tough Cover No-Skive No-Skive Compact No-Skive Compact Elite Super Tough Compact Elite Super Tough Compact Elite Super Tough Compact Elite SuperCompact Tough CompactHose No-Skive Compact No-Skive t High abrasion and shock resistance t Constant pressure working 462PU No-Skive Compact No-Skive 692PU No-Skive Compact DIN EN 853 1436 Type ISO SAE 100R19 11237 Type R17 – SAE 100R17 EN 2SC Type 2SC High pressure water cleaning applications High pressure water cleaning applications 857 2SN 2SC – ISO 11237 Type22SC t )JHI nFYJCJMJUZ FWFO BU DPME DIN 11237 EN 857Type 1SC R19 – ISO– 11237 Type 1SC ISO DIN ENabrasion 857 2SC –shock ISO 11237 Type 2SC DIN DIN EN857 857 1SC–water –ISO ISO11237 11237 Type 1SC t High and resistance /VERVIEW High pressure water cleaning applications High pressure cleaning applications /VERVIEW /VERVIEW /VERVIEW Main applications conditions t )JHI nFYJCJMJUZ FWFO BU DPME For truck cranes and lifting equipment such as forklift trucks, aerial lifts, cranes, telehandlers, lifting platforms. Ideal for over-the-sheave or reel applications. The best solution for all the demanding medium pressure hydraulic applications in all markets, especially mobile and construction equipment.

Material handling industry, where tight bend radii,

t )JHI P[POF 67 XFBUIFSJOH BOE flexibility, ozone, abrasion and shock resistance seawater resistance are needed and required. Ideal for over-thet &YUFOEFE nVJE DPNQBUJCJMJUZ sheave or reel applications. t &YDFFEJOH &/ *40 TQFDJmDBUJPOT Applicable Specifications

Water cleaning Extreme abrasion resistance Low / High temperature Water cleaning

Applicable Specifications 463 462ST 426 463

492ST Ca-28 Ca 436 Ca-27 -21 pressure Ca-14 Ca -13 493Parker specification – constant working Ca-28 Ca-22 -22 493

Exceeds EN 857 2SC - ISO 11237 type 2SC

Hose construction Inner tube: Nitrile (NBR) Reinforcement: Two high-tensile steel wire braids Cover: Premium-quality polyurethane

Hose construction Recommended media

Inner tube: Nitrile (NBR) Hydraulic fluids on a mineral-oil basis, waterReinforcement: One or two braids of high-tensile glycol and lubricating oils, air and water. For air steel wire and gas applications with a pressure exceeding Cover: Premium-quality polyurethane 1.7 MPa, the cover must be pin-pricked. For further information, please refer to “Chemical Temperature range ........ -45 °C to +100 °C Resistance� in Catalogue C4400, pages Exceptions: Air ............................ up to +70 °C Ab-24 to Ab-32.

Water ........................ up to +85 °C

conditions t )JHI P[POF 67 BOE XFBUIFSJOH resistance t &YUFOEFE nVJE DPNQBUJCJMJUZ t 5JHIU CFOE SBEJVT

Pilot cleaning Water cleaning Water Low temperature Pilot/ High

461LT 463 426 402

402 493 463 Ca-19 -22 CaCa -13 412 -6 436

412 493 Ca -6 461LT Ca-28 Ca -22 Ca-14 Ca-7

Ca-7 Ca-28 Ca-19

Recommended media Hydraulic fluids on a mineral-oil basis, waterglycol and lubricating oils, air and water. For air and gas applications with a pressure exceeding 1.7 MPa, the cover must be pin-pricked. For further information, please refer to “Chemical Resistance� in Catalogue C4400, pages Ab-24 to Ab-32.

Temperature range ........

-50 °C to +100 °C No-Skive Compact No-Skive Compact Elite Super Tough Compact Elite Super Tough Compact Elite Compact RemoFlex No-Skive No-Skive No-Skive Compact Elite Compact Compact No-Skive Compact No-Skive Compact No-Skive No-Skive Compact Elite Compact No-Skive Compact No-Skive Compact Elite Compact RemoFlex No-Skive Exceptions: Air ............................ up to +70 °C High water cleaning High water cleaning DIN EN 857 2SC –........................

ISO 11237applications Type DIN EN 857 1SC –temperature ISO 11237applications Type 1SC DIN 1EN wire braided hose for pilotapplications lines line applications SAE 100R1AT high temperature SAE 100R16 high EN100R1AT 857 low temperature High pressure water cleaning applications SAE High pressure water cleaning applications DIN High pressure cleaning SAE high temperature 100R16 high temperature 857 2SCwater low temperature Highpressure pressure water cleaning applications Highpressure pressure water cleaning applications Water up to +852SC °C 1 Pilot wire braided hose for pilot lines Pilot line 2SC applications

48

Fitting Series

Fitting Series

402 426 304 402

-6 Ca -4 Ca Ca-13 -6

Part Number

Hose I.D.

Hose O.D.

Wire cover Pilot Phosphate Wire coverEster Pilot

Ca-7 Ca-12 Ca-14 402 304 Ca-7 461LT 421WC

Pressure Rating

Inch Inch

Size Size

mm mm

mm mm

MPa Mpa

psi psi

462PU-4 462PU-5 462PU-6 462PU-8 462PU-10

6 8 10 12 16

1/4 5/16 3/8 1/2 5/8

4 5 6 8 10

6.4 7.9 9.5 12.7 15.9

13.4 15.0 17.2 20.4 23.9

42.5 40.0 35.0 31.0 28.0

6160 5800 5075 4495 4060

462PU-4-4 462PU-5-5 462PU-6-6 462PU-8-8 462PU-10-10

6 8 10 12 16

1/4 5/16 3/8 1/2 5/8

4 5 6 8 10

6.4 7.9 9.5 12.7 15.9

28.2 32.5 35.0 41.5 48.7

42.5 40.0 35.0 31.0 28.0

6160 5800 5075 4495 4060

Single hose

min. bend radius psi psi

mm DN DNmm

weight Hose I.D. kg Inch InchKg/mtSize Size

170.0 692PU-4 160.0 692PU-5 140.0 692PU-6 124.0 692PU-8 112.0 692PU-10

24640 23200 20300 17980 16240

6 75 8 85 10 90 12130 16160

1/4 0.30 4 5/16 0.35 5 3/8 0.42 6 1/2 0.52 8 5/8 0.66 10

6.4 7.9 9.5 12.7 15.9

11.5 13.6 15.5 20.4 23.9

170.0 692PU-4-4 160.0 692PU-5-5 140.0 692PU-6-6 124.0 692PU-8-8 112.0 692PU-10-10

24640 23200 20300 17980 16240

6 75 8 85 10 90 12130 16160

1/4 0.60 4 5/16 0.70 5 3/8 0.85 6 1/2 1.00 8 5/8 1.35 10

6.4 7.9 9.5 12.7 15.9

24.0 27.4 31.2 41.5 48.7

MPa Mpa

421WC Ca-19 412 402 -6 424 Ca-4 -10

Pressure Rating

min.

Partburst Number pressure

DN DN

48

Size -8 up to -10

412 436 424 412 max. working pressure

46

Size -4 up to -6

Pilot Low temperature Phosphate Pilot/ High Ester Hose O.D. mm mm

mm mm

max. working pressure

min. burst pressure

min. bend radius

weight

MPa Mpa

psi psi

MPa Mpa

psi psi

mm mm

kg Kg/mt

21.0 21.0 21.0 21.0 21.0

3045 3045 3045 3045 3045

84.0 84.0 84.0 84.0 84.0

12180 12180 12180 12180 12180

40 40 40 50 60

0.18 0.21 0.25 0.52 0.66

21.0 21.0 21.0 21.0 21.0

3045 3045 3045 3045 3045

84.0 84.0 84.0 84.0 84.0

12180 12180 12180 12180 12180

40 40 40 50 60

0.36 0.42 0.50 1.00 1.35

Ca-6 -10412 Ca-7 Ca Ca-12

Ca-7

Single hose

Elite Compact No-Skive Elite Compact Twin hose Pilot SAE 100R1AT high temperature Phosphate ester resistant hose Pilotline lineapplications applications

RemoFlex Compact No-Skive RemoFlexNo-Skive No-Skive Twin hose 1SAE braided hose forforpilot lines 100R16 high temperature Phosphate ester resistant hose 1wire wire braided hose pilot lines

Elite Compact Elite Compact No-Skive No-Skive DIN EN line 857 applications 2SC low temperature Pilot Phosphate ester resistant hose Galvanised steel wire cover

No-Skive RemoFlex Elite Compact No-Skive No-Skive Galvanised steel wire cover 1Pilot wire braided hose for pilot lines line applications Phosphate ester resistant hose

The combination of high temperature and high pressure can reduce the service life of theThe hose. combination of high temperature and high pressure can reduce the service life of the hose.

Wire Railway Phosphate Wirecover cover Ester

Wire cover Railway PowerLift

421WC 304 424Hose layline (examples for single and Ca -10 421RH Ca-12 421WC -4 441RH 421RH Ca-16 Ca -8 421WC Ca -10 Hose layline (examples for single and twin hose) 477 twin hose)

RemoFlex No-Skive 1 wire braided hose for pilot lines

PowerLift Wire cover 477 421WC Ca Ca-10 -8 477ST -24 441RH

Ca -24 477ST Ca -10 Ca-16 Ca-25

Ca-25

1"3,&3 &-*5& 16 81 .1B QTJ ] t t NN i

1"3,&3 16 81 .1B QTJ ] t t NN i

No-Skive No-Skive No-Skive Galvanised wire Phosphate ester resistant hose Fire-retardant cover Galvanisedsteel steel wirecover cover

No-Skive Compact Phosphate ester resistant hose Fire-retardant cover

PowerLift Railway PowerLift 477 421RH 477

441RH Ca -24 Ca -8 477ST 477ST Ca -24

PowerLift No-Skive PowerLiftNo-Skive No-Skive 2Fire-retardant 2wire wirebraided braidedcover

Ca 692Twin Ca-29 -29 692Twin

Elite EliteCompact Compact Constant Constantpressure, pressure,tight tightbend bendradius radius

Galvanised steel wire cover Fire-retardant cover 2 wire braided

PowerLift No-Skive No-Skive No-Skive Compact PowerLift No-Skive wirebraided braided Galvanised steel wire cover Fire-retardant cover 2 2wire

PowerLift No-Skive 2 wire braided

PowerLift

Extremely flexible PowerLift

Extremely flexible Catalogue 4400/UK Ca-Index Ca-Index Ca-25 692 692Twin Ca-16 477 Ca -29477ST Ca-25 Ca Ca -24 Ca-25 477 692 692Twin Ca-30 Ca-24 -29 477ST

PowerLift No-Skive Compact PowerLiftNo-Skive No-Skive 2Fire-retardant 2wire wirebraided braidedcover

Extremely Extremelyflexible flexible 692 692

No-Skive PowerLift No-Skive

PowerLift No-Skive Elite Compact 2Constant wire braided pressure, tight bend radius

Elite EliteCompact Compact Twin Twinconstant constantpressure, pressure,tight tightbend bendradius radius

Suction Suction

EliteCompact Compact Elite Compact PowerLift No-Skive PowerLift No-Skive Elite Constant pressure, tighttight bend radius Twinbraided constant pressure, tight bend radius 2Twin wire braided constant pressure, bend radius 2 wire

Suction Extremely Extremely flexible Suction flexible Catalogue 4400/UK

Ca-Index Ca-30 Ca-30 692 811

Ca Ca-29 -31

Ca-30 Ca-25

811 692Twin 692 881

881 Ca -31692Twin Ca-30 Ca -29 Ca-32

Ca-32 Ca-30

Elite Compact No-Skive Suction and Return Line Constant pressure, tight bend radius SAE 100R4

No-Skive Suctionand andReturn ReturnLine Line Elite No-Skive Suction and Return Line Elite Compact Compact No-Skive Suction SAEconstant 100R4 SAEconstant 100R4 pressure, tight bend radius Twin Constant pressure, pressure, tight tight bendbend radiusradius Twin SAE 100R4

Suction

Suction

ON THE FOLLOWING PAGES PLEASE FIND THE MOST COMMON AVAILABLE TYPES. Ca-32 811 Ca-32 Ca 811 811 881 Ca-31 881 Ca-31 881 Ca-32 811 Ca-31 -31 881

Ca-32

FOR OTHER TYPES OF PARKER HYDRAULIC HOSES CONTACT MENTO. No-Skive No-SkiveSuction Suctionand andReturn ReturnLine Line SAE SAE100R4 100R4

No-Skive No-SkiveSuction Suctionand andReturn ReturnLine Line SAE SAE100R4 100R4

No-Skive Suction and Return Line

No-Skive Suction and Return Line

No-Skive Suction and Return Line

SAE 100R4

SAE 100R4

SAE 100R4

Catalogue 4400/UK

Mento Hoses and Couplings Catalogue

2

13.1-2. Parker Hydraulic Hoses High pressure Overview

Parkrimp No-Skive Hose Parkrimp No-Skive Hose

High pressure Overview

Overview Parker Hydraulic Hoses

Parkrimp No-Skive Parkrimp No-Skive 3-braids Standard

3-braidslow high abrasion res.3-braids 3-braids low temperature3-braids 3-braids railway high abrasion res. 3-braids railway 3-braids Standard temperature

372

371LT Da-2 372

No-Skive Compact

Standard

372RH DaDa -1-4 372TC

No-Skive Compact No-Skive Compact

No-Skive Compact No-Skive Compact 3-wire braid low-temperature 3-wire braid compact hose compact with 3-wire braid compact hose with compact 3-wire braid low-temperature with 4SP working pressures 4SP working pressures 4SPhose working pressures hose with 4SP working pressures

3-wire braid compact hose with 4SP working pressures

Standard

701

372TC DaDa -2-1 371LT

731 Da-5 701

No-Skive Multispiral

781 DaDa-7 -5 731

ISO 3862 Type 4SP – EN 856 Type 4SP ISOISO 3862 Type – EN Type 856Type Type4SH R13– EN 856 Type 4SH 3862 Type 4SP4SH – EN 856856 Type 4SP4SH ISOEN 3862

Phosphate EsterPhosphate Ester

774

F42 Da-10774

No-Skive Multispiral

DaDa-27 -10 F42

No-Skive Multispiral No-Skive Multispiral

For phosphate ester base fluids

Da-27

No-Skive Compact braid with fire-retardant cover 3-wire braid with fire-retardant cover 4SP3-wire working pressures

Da-12P35 Da-11

No-Skive Multispiral No-Skive Multispiral

100R13 – ISO 3862 Type SAESAE 100R13 – ISO 3862 Type R13R13 – – Type EN EN 856856 Type R13R13

No-Skive Multispiral

782TC Da-6 721TC

SAE 100R12 – EN 856 Type R12 – ISO 3862 Type R12

100R13 – ISO SAESAE 100R12 – EN 8563862 Type Type R12 –R13 – 856Type TypeR12 R13 ISOEN 3862

No-Skive Multispiral SAENo-Skive 100R13 –Multispiral ISO 3862 Type R13 –

EN SAE 856 100R15 Type R13– ISO3862 Type R15

Da-15

No-Skive Multispiral

SAE 100R15 – ISO3862 Type R15

Low temperatureLow temperature Compact spiral Compact spiral

772LT

No-Skive Multispiral

Low-temperature spiral hose for extremely cold conditions

Da-9 772LT

High pressure Overview

Da-9

No-Skive Multispiral

Standard

797TC Da-14787TC

No-Skive Compact Spiral

Low-temperature spiral hose

for extremely cold conditions ParLock

H29

787TC

ISO 18752-DC

Da-18 H31

ParLock Multispiral Exceeds ISO 3862 Type 4SH – EN 856 Type 4SH

No-Skive Compact Spiral No-Skive Compact Spiral 18752-DC ISOISO 18752-DC

Da-20 H31TC

ParLock Multispiral Exceeds ISO 3862 Type R13 – Parker Specifications

Da-Index

ParLock Multispiral Exceeds ISO 3862 Type 4SP – EN 856 Type 4SP

Extreme abrasion resistance

H29ST

Da-21 H31ST

ParLock Multispiral Exceeds ISO 3862 Type 4SH – EN 856 Type 4SH

Railway

H29RH

ParLock Multispiral Exceeds ISO 3862 Type 4SP – EN 856 Type 4SP

Standard

Da-16 Da-18 H31

ParLock Hose

ParLock Multispiral

ParLock Multispiral Exceeds ISO 3862 Type 4SP – EN 856 Type 4SP

No-Skive Compact Spiral Exceeds ISO 3862 Type 4SH – ISO EN18752-DC 856 Type 4SH

Da-22 R35

ParLock Multispiral Exceeds ISO 3862 Type Parker Specifications

High abrasion resistance – MSHA approved

Da-23 R35TC

Da-Index ParLock Multispiral Exceeds ISO 3862 Type 4SH – EN 856 Type 4SH

ParLock

H29TC Da-25 R42

High abrasion resistance – MSHA approved

H29TC

High pressure Overview

DaDa-16 -14 797TC H29

Da-22 R35

ParLock Multispiral Exceeds ISO 3862 Type 4SP – EN 856 Type 4SP

Da-8

Ultra high pressure

791TC / 792TC Da-13 Da-13 Da-15791TC / 792TC Da -6 782TC

No-Skive Multispiral No-Skive Multispiral

SAE 100R13 – ISO 3862 Type R13 – EN 856 Type R13

No-Skive Multispiral

High abrasion resistance – MSHA approved High abrasion resistance – MSHA approved

721TC

No-Skive Multispiral

Da-8 761

Ultra high pressure

For phosphate ester base fluids

Da-12

Extreme pressureExtreme pressure

761

No-Skive Multispiral

No-Skive Multispiral

phosphate ester base fluids ForFor phosphate ester base fluids

Da-3

No-Skive Compact No-Skive Compact 3-wire braid compact hose with

P35 Da-11781 Da-7

No-Skive Multispiral SAE 100R13 – ISO 3862 Type R13 – No-Skive Multispiral

No-Skive Multispiral No-Skive Multispiral

DaDa -4-3 372RH

ParLock Multispiral ParLock Multispiral Exceeds ISOISO 3862 Type R15 – – Exceeds 3862 Type 4SH Parker Specifications EN 856 Type 4SH

Catalogue 4400/UK

ParLock Multispiral Exceeds ISO 3862 Type R15 – Parker Specifications

ParLock Multispiral Exceeds ISO 3862 Type 4SP – EN 856 Type 4SP

Extreme abrasion resistance

H29ST Da-26 R42TC

Da-28 Da-21 H31ST

Da-29

Railway

H29RH

Da-23 R35TC

ParLock Multispiral Exceeds ISO 3862 Type Parker Specifications

Da-24 R42ST

Catalogue 4400/UK

ParLock Multispiral ParLock Multispiral Exceeds 3862 Type 4SH Exceeds ISOISO 3862 Type R15 – – EN 856 Type 4SH Parker Specifications

ParLock Multispiral Exceeds ISO 3862 Type R13 – Parker Specifications

Da-24 R42ST

Da-27 Da-20 H31TC

ParLock Multispiral Exceeds ISO 3862 Type 4SP – EN 856 Type 4SP

ParLock Multispiral Exceeds ISO 3862 Type Parker Specifications

Da-19

ParLock Multispiral Fire-retardant cover – exceeds ISO 3862 Type 4SH – EN 856 Type 4SH

Da-19

ParLock Multispiral Fire-retardant cover – exceeds ISO 3862 Type 4SH – EN 856 Type 4SH

ON THE FOLLOWING PAGES PLEASE FIND THE MOST COMMON AVAILABLE TYPES. FOR OTHER TYPES OF PARKER HYDRAULIC HOSES CONTACT MENTO.

Mento Hoses and Couplings Catalogue

3

13.1-3. Parker Hydraulic Hoses

Parkrimp No-Skive Hose 301SN 301SN Medium pressure Standard

Parkrimp No-Skive Hose 301SN

301SN Parker Parkrimp No-Skive Hose EN 853 2SN – ISO 1436 Type 2 No-Skive

EN 853 2SN – ISO 1436 Type 2

for tank cars, irrigation plants, sludge tankers • No-Skive thin cover hose construction Primary Applications • NitrileApprovals: (NBR) inner tube Type Details please see cap. 18 General medium pressure hydraulic applications – extended fluid compatibility • Suitable with 48 series fittingsEN 853 2SN – ISO 1436 Type 2 Applicable Type Approvals Specifications: – SAE 100 R2 AT Details please find on pages Ab-14 and Ab-15 Construction: Applicable Specifications EN 853 2SN – ISO 1436 Type 2 – SAE 100 R2 AT • No-Skive thin cover hose construction Tube: Nitrile (NBR) Recommended Fluids • Nitrile (NBR) inner tube Construction – extended fluid compatibility Reinforcement: Twooils,high tensile steel wire braids Tube: Nitrile (NBR) Petroleum and water-glycol based fluids, lubricating Reinforcement: Two high tensile steel wire braids air and water. For air above 1.7 MPa, the hose cover • Suitable with 48 series fittings Cover: Synthetic rubber must be pin-pricked.

Cover: Synthetic rubber • No-Skive thinPetroleum cover hose construction Recommended Fluids: and water-glycol based Consult the chemical compatibility section on –40°C up to + 100°C Temperature Range Temperature Range °C up to +100 °C pages Ab-22 to Ab-30 for more detailed information. fluids, lubricating oils, air inner and water. For air ............ above-401.7 MPa, • Nitrile (NBR) Exception: tube Air .................................... max. +70 °C Exception: Air: max. +70°C Water: max. +85°C the hose cover must be pin-pricked. Consult the chemical Water ............................... max. +85 °C SeriesSeries: 48 – extended fluid compatibility Fitting compatibility section in cap.

18 for more detailed information. Fitting Primary Applications:

• Suitable with 48 series fittings

Pressure Rating

Hose I.D. Part Number

Hose I.D.

Hose O.D.

max. dynamic working pressure

Inch

Size

mm

mm

min. bend radius

MPa

psi

Recommended Fluids

Standard

MPa

psi

Ca-1 The combination of high temperature and highNo-Skive pressure couldHose reduce the hose life. pages Ab-22 to Ab-30 for more detailed information.

Parkrimp 301SN

C C C

421SN

weight

mm kg max. dynamic min. burst 5800 160.0 23200 100 0.39 working pressure pressure 5075 140.0 20300 115 0.42 4775 132.0 19100 130 0.55 MPa MPa psi 4000 110.0 psi 16000 180 0.67 3600 100.0 5800 14500 200 0.77 40.0 160.0 23200 3100 86.0 12400 240 1.00 35.0 140.0 20300 2400 66.0 5075 9600 300 1.49 1800 50.0 420 1.73 33.0 4775 7200 132.0 19100 1300 36.0 5200 500 2.14 1150 32.0 4000 4600 630 2.96 27.5 110.0 16000 25.0 3600 100.0 14500 21.5 3100 86.0 12400 16.5 2400 66.0 9600 12.5 1800 50.0 7200 9.0 1300 36.0 5200 Parkrimp No-Skive Hose 8.0 1150 32.0 4600

Hose 301SN-4 6 1/4 -4 6.3 15.0 40.0 Part 301SN-5 8 5/16 -5 7.9 16.6 O.D. 35.0 301SN-6 10 3/8 -6 9.5 19.0 33.0 Number DN inch 301SN-8 Size 12 1/2 mm -8 12.7 22.2 mm 27.5 16 5/8 -10 15.9 25.4 15.0 25.0 301SN-4 6 1/4 301SN-10 -4 6.3 301SN-12 20 3/4 -12 19.1 29.3 21.5 301SN-5 8 5/16 301SN-16 -5 25 1 -16 7.9 25.4 38.1 16.6 16.5 301SN-20 32 1-1/4 -20 31.8 47.5 301SN-6 10 3/8 301SN-24 -6 40 1-1/2 -24 9.5 38.1 55.0 19.0 12.5 9.0 -32 50.8 67.0 22.2 8.0 301SN-8 12 1/2 301SN-32 -8 50 2 12.7 of high temperature and high pressure could reduce the hose life.

Petroleum water-glycol based lubricating 301SN-10 and 16 5/8 The combination -10 fluids, 15.9 25.4oils, 301SN-12 20 3/4 -12 19.1 29.3 air and water. For air above 1.7 MPa, the 24.4 hose cover 301SN-16 25 1 -16 38.1 301SN-20 32 1-1/4 -20 31.8 47.5 must be pin-pricked.

301SN-24 40 1-1/2 -24 38.1 55.0 Consult the chemical compatibility Medium pressure section on 301SN-32 50 2 -32 50.8 67.0 DN

min. burst pressure

301SN

Catalogue 4400/UK

Min. bend radius mm 100 115 130 180 200 240 300 420 500 630

Weight kg 0.39 0.42 0.55 0.67 0.77 1.00 1.49 1.73 2.14 2.96

421SN

No-Skive

EN 853 2SN – ISO 1436 Type 2

Fitting Series Parker Parkrimp No-Skive Hose 48 EN 853 1SN – ISO 1436 Type 1 Primary Applications:

General medium pressure hydraulic

• No-Skive thin cover hose construction applications • Nitrile (NBR) inner tube Type Approvals: – extended fluid compatibility Details please see cap. 18 • Suitable with 48 series fittings EN 853 1SN – ISO 1436 Type 1 – Applicable

Primary Applications General medium pressure hydraulic applications

Type Approvals

Specifications: SAE100R1AT Construction: max. dynamic EN burst 853 2SN – ISO 1436 Type 2 –min.

SAE 100 R2 AT bend • No-Skive thin cover min. hose construction Nitrile (NBR) weight Tube: working pressure pressure radius Construction Recommended Fluids • Nitrile (NBR) inner tube – extended fluid compatibility Reinforcement: One Tube: Nitrile (NBR) Petroleum and water-glycol based fluids, lubricating oils,high tensile steel wire braid MPa psi MPa Reinforcement: Two psihigh tensile steel mm kgair and water. For air above 1.7 MPa, the hose cover wire braids Cover: Synthetic rubber Recommended Fluids: Petroleum and water-glycol based must be pin-pricked.

Cover: Synthetic rubber 40.0 5800 160.0 23200 100 0.39Consult Temperature the chemical compatibility section on –40°C up to + 100°C •lubricating No-Skive thin hose construction Range fluids, oils, airTemperature andcover water.

For air above 1.7 MPa, Range ............ -40 °C up to +100 °C pages Ab-22 to Ab-30 for more detailed information.

35.0 5075cover must 140.0 20300 0.42 the hose be pin-pricked. chemical Exception: Air Consult .................................... max. +70 °C Exception: Air: max. +70°C Water: max. +85°C • Nitrile (NBR) inner tube the 115 Water ............................... max. +85 °C 33.0 4775 132.0 19100 130 0.55 compatibility section in cap. 18 for more detailed information.

Fitting Fitting Series Series: 48 – extended fluid 16000 compatibility 27.5 4000 110.0 180 0.67 Details please find on pages Ab-14 and Ab-15

Applicable Specifications

25.0

3600

100.0

14500

200

21.5

3100

86.0

240

1.00

16.5

2400

66.0

12400 Hose I.D. 9600 Part Number

300

1.49 max. dynamic

12.5

1800

50.0

7200

9.0 8.0

fe.

Hose I.D.

Hose O.D.

Pressure Rating min. burst pressure

working pressure 1.73 max.MPadynamic MPa psi psi Hose 1300 36.0 301SN-4 5200 500 15.0 O.D. 2.14 6 1/4 -4 6.3 40.0 5800 23200 working160.0 pressure Part 301SN-5 8 5/16 -5 7.9 16.6 35.0 5075 140.0 20300 1150 32.0inch301SN-6 4600 630 19.0 mm 2.96 Number DN Size MPa 132.0 psi19100 10 3/8 -6 mm 9.5 33.0 4775 1/2 -8 12.7 22.2 27.5 4000 16000 421SN-4 6 1/4301SN-8 -412 6.3 13.4 22.5 110.0 3250 301SN-10 16 5/8 -10 15.9 25.4 25.0 3600 100.0 14500 19.1 29.3 21.5 3100 12400 421SN-5 8 5/16301SN-12 -520 3/4 -12 7.9 15.0 21.5 86.0 3125 301SN-16 25 1 -16 25.4 38.1 16.5 2400 66.0 421SN-6 10 3/8301SN-20 -632 1-1/4 -20 9.5 19.0 18.0 50.0 26009600 31.8 47.5 12.5 1800 7200 38.1 55.0 1300 421SN-8 12 1/2301SN-24 -840 1-1/2 -24 20.7 22.29.0 16.5 36.0 23255200 301SN-32 50 2 -32 50.8 67.0 8.0 1150 32.0 4600 421SN-10 16 water-glycol 5/8 -10 fluids, 23.9lubricating 25.4 oils, 13.0 1875 Petroleum and The combination of based high temperature and high pressure could reduce the hose life.

421SN-12 20 3/4 -12 27.8 29.3 10.5 1525 air and water.25For air above 1.7-16MPa, the 421SN-16 1 35.8hose cover 38.1 8.8 1275 421SN-20 32 1-1/4 -20 44.8 47.5 6.3 900 be pin-pricked. must 421SN-24 40 1-1/2 -24 51.1 55.0 5.0 725 Consult compatibility 421SN-32 the chemical 50 2 -32 section 64.7 on 67.0 4.0 575 DN

Inch

Size

420

0.77

mm

mm

Recommended Fluids

The combination high temperature high pressure could reduce the hose life. °C pages Ab-22 toof Ab-30 for moreand detailed information.

Ca-1 °C Catalogue 4400/UK Ca-1

min. bend radius

weight

min. burst kg 0.39 pressure 0.42 MPa 0.55 psi 130 180 90.0 0.67 13000 200 0.77 240 86.0 1.00 12500 300 72.0 1.49 10400 420 1.73 500 64.0 2.14 9300 630 2.96 52.0 7500 42.0 6100 35.0 5075 25.0 3600 20.0 2900 16.0 2300

mm 100 115

Catalogue 4400/UK

Min. bend radius mm 100 115 130 180 200 240 300 420 500 630

Weight kg 0.24 0.27 0.34 0.43 0.49 0.63 0.94 1.19 1.49 2.23

Medium pressure Standard

492 Mento Hoses and Couplings Catalogue

Parkrimp No-Skive Hose

492 Parkrimp No-Skive Hose

13.1-4. Parker Hydraulic Hoses

Elite Compact

4

492

EN 857 1SC – ISO11237 Type 1SC

492 Elite Compact EN 857 1SC – ISO11237 Type 1SC Primary Demanding medium pressure • No-Skive hoseApplications: construction hydraulic applications – Compact design • Nitrile (NBR) inner tube Type Approvals: Details please see cap. 18 – extended fluid compatibility • Exceeding EN/ISO specifications for Applicable EN 857 1SC – ISO11237 Type 1SC pressure, bend radius and abrasion Specifications: resistance

Primary Applications

SC

Demanding medium pressure hydraulic applications

Type Approvals Details please find on pages Ab-14 and Ab-15

Applicable Specifications

Construction: EN 857 1SC – ISO11237 Type 1SC No-Skive hose construction – Compact design Tube: Fluids Nitrile (NBR) Construction Recommended Nitrile (NBR) inner tube – extended fluid compatibility Petroleum and water-glycol based fluids, lubricating oils, Tube: Nitrile (NBR) Reinforcement: One high tensile steel wire braid Reinforcement: One high tensile steel wire braidbend air and water. For air above 1.7 MPa, the hose cover Exceeding EN/ISO specifications for pressure, Cover: Synthetic rubber Cover: Synthetic rubber must be pin-pricked.

• radius No-Skive hoseresistance construction and abrasion Consult the chemical compatibility section on Temperature Range –40°C up to + 100°C Temperature Range -40 °C up to +100 °C pages Ab-22 to Ab-30 for more detailed information.

– Compact design Recommended Fluids: Petroleum and............ water-glycol based Exception: Air .................................... max. +70 °C Exception: Air: max. +70°C Water: max. +85°C fluids, lubricating oils, air and Water water.

For air above 1.7 MPa, ............................... max. +85 °C • Nitrile (NBR) inner tube the hose cover must be pin-pricked. Consult the chemical Fitting Series 46 Fitting Series: – extended compatibility section in fluid cap. 18compatibility for more detailed information.

• • •

applications

• Exceeding EN/ISO specifications for pressure, bend radius and abrasion Hose I.D. resistance

Ab-15

Part Number

Hose I.D.

DN

Inch

Size

mm

Pressure Rating

max. dynamic working pressure

Hose O.D. mm

MPa

Hose 492-4 6 1/4 -4 6.3 11.5 28.0 Part O.D. 492-5 8 5/16 -5 7.9 13.6 25.0 492-6 10 Size 3/8 -6 9.5 mm15.5 22.5 Number DN inch mm 492-8 12 1/2 -8 12.7 18.9 19.0 492-4 6 1/4 -4 -10 15.9 6.322.2 11.5 492-10 16 5/8 15.0 492-12 20 3/4 15.0 492-5 8 5/16 -5 -12 19.1 7.926.0 13.6 492-16 25 1 -16 25.4 11.0 492-6 and 10 3/8 based -6 9.533.3 15.5 Petroleum water-glycol fluids, lubricating oils, 492-4-WR 6 1/4 28.0 492-8 12 1/2 -8 -4-5 6.3 12.711.5 18.9 492-5-WR 8 5/16 7.9 13.6 25.0 air and water. For the9.5hose 492-10 16 air above 5/8 1.710 MPa, -10 15.915.5 cover 22.2 492-6-WR 3/8 -6 22.5 492-8-WR 12 1/2 -8 12.7 18.9 19.0 20 3/4 -12 19.1 26.0 must492-12 be pin-pricked.

492-10-WR 16 5/8 -10 15.9 22.2 15.0 492-16 25 1 33.3 492-12-WR 20 -16 3/4 -12 19.1 24.426.0 15.0

Recommended Fluids

ire braid

min. bend radius

max. dynamic 4060 112.0 16240 working pressure 3625 100.0 14500 3260 MPa 90.0 13050 psi 2755 76.0 11020 40608700 2175 28.0 60.0 2175 25.0 60.0 36258700 1595 22.5 44.0 32606380 4060 16240 19.0 112.0 2755 3625 100.0 14500 2175 3260 15.0 90.0 13050 2755 76.0 11020 15.0 60.0 2175 2175 8700 11.0 1595 2175 60.0 8700 psi

MPa

psi

Consult the chemical compatibility 492-16-WR 25 1 section -16 25.4 on 33.3 11.0 1595 6380 The combination of high temperature and high pressure could reduce the44.0 hose life.

492-20-WR 32 1.1/4 -20 31.8 40.0 7.5 1085 30.0 4350 pages Ab-22 to Ab-30 for more detailed information.

C up to +100 °C ..... max. +70 °C ..... max. +85 °C

Parkrimp No-Skive Hose Extreme abrasion resistance 492ST

kg min. burst 0.18 pressure 85 0.21 90 MPa 0.25 psi 130 0.33 112.0 0.41 16240 150 180 100.0 0.56 14500 230 90.0 0.75 13050 75 76.0 0.18 11020 85 0.21 60.0 0.25 8700 90 130 0.33 60.0 0.41 8700 150 44.0 0.56 6380 180 75

230

0.75

335

0.93

Min. bend radius mm 75 85 90 130 150 180 230

Weight kg 0.18 0.21 0.25 0.33 0.41 0.56 0.75

492ST

Hose 492ST

Ca-26

492ST

Catalogue 4400/UK

Fitting Series Elite Super 46 Tough Compact EN 857 1SC – ISO11237 Type 1SC Elite Super Tough Compact EN 857 1SC – ISO11237 Type 1SC

Primary Applications:

1SC

Primary Applications Mobile market: Medium pressure hydraulic applications

max. dynamic min. burst with extremely high bend abrasion risks min. weight working pressure pressure – Compact design radius • No-Skive hose construction Applicable Specifications

mm

MPa

11.5

28.0

13.6

25.0

15.5

22.5

18.9

19.0

22.2

15.0

1SC – ISO11237 Type 1SC psi (NBR) inner MPatubeEN psi fluid compatibility mm kg • Nitrile – 857 extended Construction • Extreme abrasion resistant cover75 4060 112.0 16240 0.18 Tube: Nitrile (NBR) Reinforcement: One high tensile steel wire braid • No-Skive hose construction Recommended Fluids: Petroleum and water-glycol based 3625 100.0 14500 85 0.21 Cover: Synthetic rubber with a air special polyethylene fluids, lubricating oils, air and water.

For above MPa, 3260 90.0 13050 901.7coating 0.25 – Compact design the hose be pin-pricked.

Consult the130 chemical0.33 2755cover must76.0 11020 Temperature Range ............

-40 °C up to +100 °C • Nitrile (NBR) inner tube Air .................................... max. +70 °C compatibility section in cap.Exception: 18 for 8700 more detailed information.

2175 60.0 150 0.41

rasion risks 11.5

28.0

– extended 60.0 fluid compatibility 8700 180 230 • Extreme44.0 abrasion6380 resistant Hose I.D. cover 4060 112.0 16240 75

13.6

25.0

3625

26.0 15.0 aulic33.3 applications 11.0

Water ............................... max. +85 °C

2175 1595

100.0

Part Number

14500 DN

Hose I.D. Inch

Size

85 mm

Hose O.D. mm

0.56 0.75

• No-Skive hose construction – Compact design Applicable • Nitrile (NBR) inner tube Specifications: – extended fluid compatibility •Construction: Extreme abrasion resistant cover

FittingFitting Series

Series:

46

Pressure Rating

0.18 max. dynamic

0.21working pressure MPa

22.5

3260

90.0

13050 492ST-4

90 6.3

Mobile market: Medium pressure hydraulic applications with extremely high abrasion risks EN 857 1SC – ISO11237 Type 1SC

Tube: Nitrile (NBR) Reinforcement: One high tensile steel wire braid Recommended Fluids Cover: Synthetic rubber with a special Petroleum and water-glycol based fluids, lubricating oils, air and water. For air above 1.7 MPa, the hose cover polyethylene coating must be pin-pricked.

Temperature Range Consult the chemical compatibility section on –40°C up to + 100°C pages Ab-22 to Ab-30 for more detailed information.

Exception: Air: max. +70°C Water: max. +85°C

psi

min. burst pressure MPa

min. bend radius psi

max.112.0 dynamic 0.25 Hose 6 1/4 -4 12.0 28.0 4000 16240 492ST-5 8 5/16 -5 7.9 13.6 O.D.25.0 3625 100.0 14500 working pressure Part 18.9 19.0 2755 76.0 11020 130 0.33 492ST-6 10 3/8 -6 9.5 15.5 22.5 3260 90.0 13050 Number DN inch mm MPa psi 492ST-8 Size 12 1/2 -8 12.7 18.9 mm 19.0 2755 76.0 11020 22.2 15.0 2175 60.0 8700 16 5/8 -10150 0.41 15.9 22.3 15.0 2175 60.0 8700 492ST-4 6 1/4 492ST-10 -4 6.3 12.0 28.0 4000 492ST-12 20 3/4 -12 19.1 26.0 15.0 2175 60.0 8700 26.0 15.0 2175 60.0 8700 25 1 -16180 0.56 25.4 33.6 11.0 1595 44.0 6380 492ST-5 8 5/16 492ST-16 -5 7.9 13.6 25.0 3625 492ST-20 32 1.1/4 -20 31.8 40.0 7.5 1085 30.0 4350 33.3 11.0 1595 44.0 6380 230 0.75 of high temperature and high pressure could reduce the hose life.

492ST-6 10 3/8The combination -6 9.5 lubricating 15.5 oils, 22.5 3260 Petroleum based 40.0 7.5 1085 and water-glycol 30.0 4350 fluids, 335 0.93 492ST-8 12 1/2 -8 12.7 18.9 19.0 2755 wire braid Part Number withair and(WR): water.

Forcover air has above 1.7 appearance.

MPa, the hose cover h appearance. a492ST-10 suffix the 16 hose 5/8 a wrapped-10 15.9 22.3 15.0 2175 ould reduce the hose life. be pin-pricked. must 492ST-12 20 3/4 -12 19.1 26.0 15.0 2175 492ST-16 25 1 -16 section 25.4 on 33.6 11.0 1596 ylene coating Consult the chemical compatibility 492ST-20 32 1-1/4 -20 31.8 40.0 7.5 1085 15.5

weight

mm

Part Number without a suffix: the hose cover has a smooth appearance. Part Number with a suffix (WR): the hose cover has a wrapped appearance.

The combination of high temperature and high pressure could reduce the hose life.

Also available on reels under partpressure number 492-xx-RL Medium Parkrimp No-Skive

pact

Hose O.D.

min. burst pressure

Recommended Fluids

pages Ab-22 to Ab-30 for more detailed information.

Ca-27 4400/UK pressure could reduce the hose life.

Ca-26 The combination of high temperature and highCatalogue °C up to +100 °C

weight

mm

kg

75

0.18

85

0.21

min. burst pressure 90 0.25 MPa 0.33 psi 130 150 0.41 112.0 16240 180 0.56 230 100.0 0.75 14500 335 0.93 90.0 13050 76.0 11020 60.0 8700 60.0 8700 44.0 6380 30.0 4350

Catalogue 4400/UK

Min. bend radius mm 75 85 90 130 150 180 230 335

Weight kg 0.18 0.21 0.25 0.33 0.41 0.56 0.75 0.93

Mento Hoses and Couplings Catalogue

5

13.1-5. Parker Hydraulic Hoses

692PU No-Skive Compact hose with 1 or 2 steel wire braids as single or twin hose Medium pressure Standard

Parkrimp No-Skive Hose 492

492

Parkrimp No-Skive Hose media: Hydraulic fluids on a mineral-oil basis, 301SN waterglycol and lubricating oils, air and water. For air and gas EN 857 1SC – ISO11237 Type 1SC applications with a pressure exceeding 1.7 MPa, the cover 301SN No-Skive must be pin-pricked. For further information see cap. 18 EN 853 2SN – ISO 1436 Type 2 Main applications: Material handling industry, where tight bend radii, flexibility, ozone, abrasion and shock resistance • No-Skiveand hose construction are needed required.

Ideal for over-thesheave or reel Primary Applications – Compact design applications Demanding medium pressure hydraulic applications • Nitrile (NBR) inner tube • No-Skive thin cover hose construction Primary Applications – extended uid compatibility • Nitrile (NBR) inner tube Applicable Parker specification – constant General medium pressure hydraulic applications Type Approvals – extended • Exceeding EN/ISO speciďŹ cations foruid compatibility Specifications: working pressure Details please ďŹ nd on pages Ab-14 and Ab-15 • Suitable with 48 series ďŹ ttings pressure, bend radius and abrasion Type Approvals resistance Details please ďŹ nd onConstruction: pages Ab-14 and Ab-15 Applicable SpeciďŹ cations EN 857 1SC – ISO11237 Type 1SC Tube: Nitrile (NBR) Applicable SpeciďŹ cations No-Skive hose construction EN 853 2SN – ISO 1436 Type 2 – SAE 100 R2 AT Reinforcement: Construction Recommended Fluids One or two braids of high-tensile Constant working pressure Construction Recommended Fluids Tube: Nitrile (NBR) Petroleum and water-glycol based uids,wire lubricating oils, steel Tube: Nitrile air (NBR) Petroleum and cover water-glycol based uids, lubricating oils, Reinforcement: One high tensile steel wire braid and water. For air above 1.7 MPa, the hose High abrasion and shock resistance Reinforcement: Two Cover: high tensile steel wire braids air and water. For air abovepolyurethane 1.7 MPa, the hose cover Premium-quality Cover: Synthetic rubber must be pin-pricked.

Cover: Synthetic rubber be pin-pricked.

Consult the chemical compatibilitymust section on High flexibility even at cold conditions Consult the chemical compatibility section on Temperature Range –45°C up to + 100°C Temperature Range ............ -40 °CTemperature up to +100 °C pages Ab-22 to Ab-30 for more detailed information.

Range ............ -40 °C up to +100 °C pages Ab-22 to Ab-30 for more detailed information.

High ozone-, UV- and weathering resistance resistance Exception: Air .................................... max. +70 °C Exception: max. +70 °C Air: max. +70°C Water: max. +85°C Exception: Air ....................................

Water ............................... max. +85 °C Water ............................... max. +85 °C Extended fluid compatibility Fitting Series 46 -8 up to -10 48 -4 Fitting up to Series -6 Fitting Series: Tight bend radius Medium pressureRecommended Standard

Elite Compact

21.0 MPa

t /P 4LJWF IPTF DPOTUSVDUJPO F IPTF DPOTUSVDUJPO • • t Constant working pressure • t High abrasion and shock resistance • • t )JHI nFYJCJMJUZ FWFO BU DPME • conditions • t )JHI P[POF 67 BOE XFBUIFSJOH resistance Hose I.D. t &YUFOEFE nVJE DPNQBUJCJMJUZ Hose t 5JHIU CFOE SBEJVT Part Number

Part Number

Hose I.D.

DN

Inch

Size

Hose O.D.

mm

mm 301SN-4

Hose

max. dynamic I.D. working pressure DN

MPa 6

Hose

Inch

Size

mm

1/4

psi -4

6.3

max. dynamic

working pressure min. burstRating O.D. min. bend Pressure pressure mm

MPa

MPa 15.0

40.0psi

radius psi

mm 5800

min. burst pressure

weight

min. bend radius

weight

MPa

psi

mm

kg

kg 160.0

23200

100

0.39

492-4 6 1/4 -4 6.3 min.

Min. 301SN-6 10 3/8max.

-6 dynamic 9.5 19.0 33.0 4775 burst 132.0 19100 bend 130 0.55 492-5 8 5/16 -5 7.9 13.6 25.0 3625 100.0 14500 85 0.21 301SN-8 12 1/2 -8 12.7 22.2 27.5 4000 110.0 16000 0.67 O.D. radius 180 Weight Part 492-6 10 3/8 -6 9.5 15.5 22.5 working 3260pressure 90.0 13050 pressure 90 0.25 301SN-10 16 5/8 -10 15.9 25.4 25.0 3600 100.0 14500 200 0.77 12 1/2 -8 12.7 18.9 19.020 2755 76.0 11020 130 0.33 301SN-12 3/4 -12 19.1 psi 29.3 21.5 3100 86.0 12400 240 1.00kg mm mm DN inch 492-8 Size mm Number MPa MPa psi 492-10 16 5/8 -10 15.9 22.2 15.025 2175 60.0 150 0.41 301SN-16 1 -16 25.4 38.1 16.58700 2400 66.0 9600 300 1.49 Single hose 492-12 20 3/4 -12 19.1 26.0 15.032 1-1/4 2175 60.0 180 0.56 301SN-20 -20 31.8 47.5 12.58700 1800 50.0 7200 420 1.73 301SN-24 1-1/2 1595 -24 38.1 55.0 9.06380 36.0 5200 2.14 -16 25.4 33.3 11.040 21.0 44.0 230 12180 0.75 692PU-4 6 1/4 492-16 4 25 1 6.4 11.5 3045 84.0 1300 40 500 0.18 301SN-32 50 2 -32 50.8 67.0 8.0 1150 32.0 4600 630 2.96 6 1/4 7.9 -4 6.3 11.5 28.0 21.0 4060 112.0 16240 75 12180 0.18 692PU-5 8 5/16 492-4-WR 5 13.6 3045 40 0.21 The combination of high temperature and high pressure could reduce the hose life. 84.0 492-5-WR 8 5/16 -5 7.9 13.6 25.0 3625 100.0 14500 85 0.21 692PU-6 10 3/8 492-6-WR 6 10 3/8 9.5-6 9.5 15.5 3045 84.0 40 0.25 15.5 22.5 21.0 3260 90.0 13050 90 12180 0.25 -8 12.7 18.9 19.0 21.0 2755 76.0 11020 130 12180 0.33 692PU-8 12 1/2 492-8-WR 8 12 1/2 12.7 20.4 3045 84.0 50 0.52 492-10-WR 16 5/8 -10 15.9 22.2 15.0 2175 60.0 8700 150 0.41 Hydraulic fluids 16on a mineral-oil water692PU-10 5/8 492-12-WR10 basis, 15.9 23.9 21.0 2175 3045 84.0 12180 60 0.66 20 3/4 -12 19.1 26.0 15.0 60.0 8700 180 0.56 492-16-WR 25 1 -16 25.4 33.3 11.0 1595 44.0 6380 230 0.75 Twin hose glycol692PU-4-4 and lubricating oils, air and For 24.0 air 7.5 21.0 1085 304530.0 1.1/4 -20 40.0 4350 335 0.93 6 1/4 492-20-WR 4 32 water.

6.4 31.8 84.0 12180 40 0.36 Part Number without a sufďŹ x: the hose cover has a smooth appearance. Part Number with a sufďŹ x (WR): the hose cover has a wrapped appearance.

692PU-5-5 8 5/16 5 27.4 21.0 3045 84.0 12180 40 Catalogue 4400/UK 0.42 The combination of high temperature and 7.9 high pressure could reduce the hose life.

Ca-1 and gas applications with a exceeding Also available onpressure reels under part number 492-xx-RL 692PU-6-6 10 3/8 6 9.5 31.2 21.0 3045 84.0 12180 40 0.50 692PU-8-8 12 1/2 be pin-pricked.

8 12.7 3045 84.0 12180 50 1.00 1.7 MPa, the cover must For41.5 Ca-2621.0 Catalogue 4400/UK 692PU-10-10 16 5/8 10 15.9 48.7 21.0 3045 84.0 12180 60 1.35 301SN-5 11.5

28.0 8

5/16

-5 4060

7.9

16.6 112.0

Recommended media

further information, please referandtohigh “Chemical The combination of high temperature pressure could reduce the hose life.

Resistance� in Catalogue C4400, pages Ab-24 to Ab-32.

Fitting Series Size -4 up to -6

46

Size -8 up to -10

48

Pressure Rating max. working pressure

min. burst pressure

min. bend radius

weight

MPa Mpa

psi psi

MPa Mpa

psi psi

mm mm

kg Kg/mt

21.0 21.0 21.0 21.0 21.0

3045 3045 3045 3045 3045

84.0 84.0 84.0 84.0 84.0

12180 12180 12180 12180 12180

40 40 40 50 60

0.18 0.21 0.25 0.52 0.66

21.0 21.0

3045 3045

84.0 84.0

12180 12180

40 40

0.36 0.42

35.0 16240

507575

140.0 0.18

20300

115

0.42

Mento Hoses and Couplings Catalogue

6

13.1-6. Parker Hydraulic Hoses

Parkrimp No-Skive Hose Medium pressure Medium pressure Standard Standard 462

Parkrimp No-Skive Parkrimp Hose No-Skive Hose 462 462

462 462 Elite Compact EN 857 2SC 462 – ISO11237 Type 2SC Elite Compact Elite Compact

EN 857 2SC – ISO11237 EN 857 2SC Type–2SC ISO11237 Type 2SC

Demanding medium pressure hydraulic applications in all markets Primary Applications Primary Applications • No-Skive hose •construction No-Skive hose construction Type Approvals: Details please see cap. 18 Demanding medium Demanding pressure hydraulic medium applications pressure hydraulic in all applications in all – Compact design – Compact design markets markets • Nitrile (NBR) inner • Nitrile tube(NBR) inner tube Applicable EN 857 2SC – ISO11237 Type 2SC – extended fluid –compatibility extended fluid compatibility Type Approvals Type Approvals • Exceeding EN/ISO • Exceeding specifications EN/ISOforspecifications for Specifications: Details please find onDetails pagesplease Ab-14find andon Ab-15 pages Ab-14 and Ab-15 pressure, bend radius pressure, andbend abrasion radius and abrasion resistance resistance • No-Skive hose construction – Compact design Applicable SpecificationsConstruction: Applicable Specifications EN 857 2SC – ISO11237 EN 857 Type 2SC 2SC – ISO11237 Type 2SC Tube: Nitrile (NBR) • Nitrile (NBR) inner tube – extended fluid compatibility Construction Construction Recommended Recommended Fluids Fluids Reinforcement: Two highbased tensile steel wire braids • Exceeding EN/ISO specificationsTube: for pressure, bend Nitrile (NBR) Nitrile Tube: (NBR) Petroleum and water-glycol Petroleum based andfluids, water-glycol lubricating oils,fluids, lubricating oils, Reinforcement: Two Reinforcement: high tensile steelTwo wirehigh braids tensileCover: steel wire air and braids water. For air air above and 1.7 water.

MPa, For the air hose above cover 1.7 MPa, the hose •radius No-Skive hose construction and abrasion resistance Synthetic rubber cover Cover: Synthetic Cover:rubber Synthetic rubber must be pin-pricked.must be pin-pricked.

Consult the chemical Consult compatibility the chemical section compatibility on up to section on Recommended Fluids: Petroleum water-glycol based – Compact designandTemperature Temperature Range –40°C + 100°C Range Temperature ............ -40Range up to............ +100 °C-40 °C pages up toAb-22 +100 to °CAb-30 pages for more Ab-22 detailed to Ab-30 information. for more detailed information. fluids, lubricating oils, air and water. Exception: For air above 1.7 MPa,Air°C.................................... max. +70Exception: °C max. +70 °C Air ....................................

Exception: Air: max. +70°C Water: max. +85°C • Nitrile (NBR) inner tube Waterchemical ...............................

Water ............................... max. +85 °C max. +85 °C the hose cover must be pin-pricked. Consult the Fitting Series Fitting Series 46 48 46 48 Fitting Series: – extended fluid compatibility compatibility section in cap.

18 for more detailed information.

Primary Applications:

2SC

applications in all

• Exceeding EN/ISO specifications for pressure, bend radius Hose I.D. and abrasion resistance

Ab-15

Part Number

PartHose Number I.D.

DN

Inch

Size

HoseHose O.D. I.D.

mm DN

mm Inch

max. dynamic Hose working pressure O.D.

Size MPa mm

mmpsi

Pressure Rating max.min. dynamic burst working pressure pressure

MPaMPa

psi psi

min. burst min. bend pressure weight radius MPa mm

min. bend radius

weight

mm

kg

kg psi

max.13.4dynamic min.

6.3 6 13.4 1/4 -4 42.56.3 6160 42.5170.0 616024640 170.075 burst 0.30 24640 75 0.30 Hose Min. bend 462-5 8 5/16 462-5 -5 7.9 8 15.0 5/16 -5 40.07.9 15.0 5800 40.0160.0 580023200 160.085 0.35 23200 85 0.35 working pressure Part 462-6 10 462-6 3/8 -6 O.D. 9.5 10 17.2 3/8 -6 35.09.5 17.2 5075 35.0140.0 507520300 pressure 140.090 0.42 20300 90 radius 0.42 12 462-8 1/2 -8 12.7 12 20.4 1/2 -8 31.0 12.7 20.4 4495 31.0124.0 449517980 124.0 130 0.52 17980 130 0.52 Number DN inch Size 462-8 mm mm mm MPa psi MPa psi 462-10 16 462-10 5/8 -10 15.9 16 23.9 5/8 -10 28.0 15.9 23.9 4060 28.0112.0 406016240 112.0 160 0.66 16240 160 0.66 462-12 20 462-12 3/4 -12 19.1 20 27.7 3/4 -12 28.0 19.1 27.7 4060 28.0 112.0 4060 16240 112.0 195 0.86 16240 195 462-4 6 1/4 -4 462-16 6.325 462-16 13.4 42.5 6160 170.0 84.0250 24640 750.86 1 -16 25.4 25 35.4 1 -16 21.0 25.4 35.4 3045 21.0 84.0 304512180 1.17 12180 250 1.17 462-5 8 5/16 -5 462-4-WR 7.96 462-4-WR 15.0 40.0 13.46160 5800 160.0 170.075 23200 850.30 1/4 -4 6.3 6 13.4 1/4 -4 42.56.3 42.5170.0 616024640 0.30 24640 75 462-5-WR 462-5-WR -5 17.2 7.9 8 15.0 -535.0 40.07.9 15.0 5800 5075 40.0160.0 5800 23200 160.085 0.35 23200 85 462-6 and10 3/8 based -6 fluids, 9.58 5/16 140.0 20300 900.35 Petroleum water-glycol lubricating oils,5/16 462-6-WR 10 462-6-WR 3/8 -6 9.5 10 17.2 3/8 -6 35.09.5 17.2 5075 35.0140.0 507520300 140.090 0.42 20300 90 0.42 462-8 12 1/2 -8 462-8-WR 12.712 462-8-WR 124.0 17980 130 1/2 -8 20.4 12.7 12 20.4 1/2 -831.0 31.0 12.7 20.4 4495 4495 31.0124.0 4495 17980 124.0 130 0.52 17980 130 0.52 462-10-WR 16 462-10-WR 5/8 cover -10 15.9 16 23.9 5/8 -10 28.0 15.9 23.9 4060 28.0112.0 406016240 112.0 160 0.66 16240 160 0.66 air and water.

For air above 1.7 MPa, the hose 462-10 16 5/8 -10 462-12-WR 15.920 462-12-WR 23.9 28.0 4060 112.0 112.0195 16240 160 3/4 -12 19.1 20 27.7 3/4 -12 28.0 19.1 27.7 4060 28.0112.0 406016240 0.86 16240 195 0.86 462-16-WR 25 462-16-WR 1 -16 27.7 25.4 25 35.4 1 -1628.0 21.0 25.4 35.4 3045 4060 21.0 84.0 3045 12180 84.0 250 1.17 12180 250 1.17 462-12 20 3/4 -12 19.1 112.0 16240 195 must be pin-pricked.

462-20-WR* 32 1-1/4 462-20-WR* -20 31.8 32 43.0 1-1/4 -20 17.2 31.8 43.0 2495 17.2 68.8 2495 9980 68.8 335 1.50 9980 335 1.50 462-16 25 1 -16 25.4the hose 35.4 21.0 3045 84.0 12180 250 Part Number without a suffix: Part Number cover without has a asmooth suffix: the appearance. hose cover Part hasNumber a smooth with appearance. a suffix (WR): Part theNumber hose cover with has a suffix a wrapped (WR): the appearance. hose cover has a wrapped appearance.

462-4

6

462-4 1/4

-4

Recommended Fluids

wire braids

°C up to +100 °C ...... max. +70 °C ...... max. +85 °C

Consult the chemical section on Medium pressure Medium pressure The combination of highcompatibility temperature and high pressure could reduce the hose life.

Parkrimp No-Skive Standard Standard Hose pages Ab-22 to Ab-30 for more detailed information.

Ca-20 462 Ca-20 462 462 The combination of high temperature The combination and high pressure of high temperature could reduce andthe high hose pressure life. could reduce the hose life.

Also available on reels under part Alsonumber available462-xx-RL on reels under part number 462-xx-RL * only with fitting series 46 * only with fitting series 46

Weight kg 0.30 0.35 0.42 0.52 0.66 0.86 1.17

Parkrimp No-Skive Parkrimp Hose No-Skive Hose 462 462 Catalogue 4400/UK

Catalogue 4400/UK

462ST Elite Super Tough Compact EN 857 2SC – ISO11237 Type 2SC Elite Compact Elite Compact

EN 857 2SC – ISO11237 EN 857 2SC Type–2SC ISO11237 Type 2SC

46

Fitting Series

48

Medium pressure hydraulic applications with extremely high Primary Applications Primary Applications • No-Skive hose •construction No-Skive hose construction abrasion Demanding medium Demanding pressure hydraulic medium applications pressure hydraulic in all applications in all – Compact design – Compact designrisks 2SC markets markets • Nitrile (NBR) inner • Nitrile tube(NBR) inner tube Applicable EN 857 – ISO11237 Type 2SC – extended fluid –compatibility extended fluid2SC compatibility Type Approvals Type Approvals • Exceeding EN/ISO • Exceeding specifications EN/ISOforspecifications for Specifications: Details please find onDetails pagesplease Ab-14find andon Ab-15 pages Ab-14 and Ab-15 pressure, bend radius pressure, andbend abrasion radius and abrasion resistance resistance Construction: Applicable Specifications Applicable Specifications EN 857 2SC – ISO11237 EN 857 Type 2SC 2SC – ISO11237 Type 2SC Tube: Nitrile (NBR) max. dynamic min. burst Hose min. bend • No-Skive hose construction – Compact design weight Construction Construction Recommended Recommended Fluids Fluids working pressure pressure Reinforcement: One highbased tensile steel wire braid O.D. radius Tube:fluid compatibility Nitrile Tube: (NBR) Nitrile (NBR) Petroleum and water-glycol Petroleum based andfluids, water-glycol lubricating oils,fluids, lubricating oils, • Nitrile (NBR) inner tube – extended Reinforcement: Two Reinforcement: high tensile steelTwo wirehigh braids tensileCover: steel wire air and braids water. For air air above and 1.7 water.

MPa, For the air hose above cover 1.7tensile MPa, the hose cover wire braids Two high steel m mm MPa psi MPa psi mm kg rubber Cover: Synthetic Cover:rubber Synthetic must be pin-pricked.must be pin-pricked.

• Extreme abrasion resistant cover • No-Skive hose construction Consult the chemical Consult compatibility the chemical section compatibility on up to section on Temperature Range –40°C + 100°C Recommended Fluids: Petroleum and water-glycol Temperature Range Temperature ............ -400.30 Range °C up to............ +100 °C-40 °C pages up toAb-22 +100 to °CAb-30 pages for more Ab-22 detailed to Ab-30 information. for more detailed information.

3 13.4 42.5 6160 170.0 24640 75based applications in all Exception: Air ....................................

Exception: Air .................................... max. +70Exception: °C max. +70 °C – Compact design Air: max. +70°C Water: max. +85°C fluids,5800 lubricating oils, air and water.

For air above851.7 MPa,0.35 9 15.0 40.0 160.0 23200 Water ...............................

Water ............................... max. +85 °C max. +85 °C

5

17.2

35.0

7

20.4

31.0

9

23.9

28.0

1 27.7 Ab-15 4 35.4

28.0 21.0

3

13.4

42.5

9

15.0

40.0

5

17.2

35.0

7

20.4

31.0

9

23.9

28.0

1

4 wire

Primary Applications:

27.7 35.4 braids

the•hose cover must be pin-pricked.

Consult the chemical Nitrile (NBR) inner 20300 tube 5075 140.0 90 0.42 compatibility section in cap.

18 for more detailed information.

4495 124.0 17980 130 0.52 – extended fluid compatibility 112.0 160 0.66 • 4060 Exceeding EN/ISO16240 specifications for 4060 112.0 16240 195 0.86 Hose I.D. and abrasion pressure, 84.0 bend radius 3045 12180 250 1.17 resistance 6160 170.0 24640 75 0.30 Part Number

PartHose Number I.D.

DN

5800

Part5075 Number

4495

DN

max.min. dynamic burst

working pressure pressure Pressure Rating MPaMPa

psi psi

MPa mm

kg psi

min. bend radius mm

weight kg

462-4 1/4

-4

6.3

6 13.4 1/4

-4 42.56.3

13.4 6160

42.5170.0

616024640

170.075

0.30 24640

75

0.30

-5

7.9

8 15.0 5/16

-5 40.07.9

15.0 5800

40.0160.0

580023200

160.085

0.35 23200

85

0.35

10

462-6 3/8

90

0.42

9.5 10 17.2 3/8 -6 35.09.5 5075 35.0140.0 max.17.2 dynamic Hose 12.7 12 20.4 1/2 -8 31.0 12.7 20.4 4495 31.0124.0 0.35 15.9 16 23.9 5/8 -10 28.0 15.9 23.9 4060 28.0112.0 working pressure O.D. 20 3/4 -12 19.1 20 27.7 3/4 -12 28.0 19.1 27.7 4060 28.0112.0 90462-12 0.42 1 -16 25.4 25 35.4 1 -16 21.0 25.4 35.4 3045 mm25 462-16 mm MPa psi21.0 84.0 -6

507520300

12

-8

449517980

16

462-10 5/8 -10

406016240

1/2 85462-8

20300462-12 17980462-4-WR

Size 462-16

462-5-WR

16240462-6-WR

130 6 462-4-WR 1/4 -4

0.52 6.3 6 13.4 1/4

8 5/16 462-5-WR -5 13.4 7.9 8 15.0 5/16 6.3 160 0.66 10

462-6-WR 3/8 -6

9.5 10 17.2 3/8

462-8-WR 12 462-8-WR 1/2 -8 15.0 12.7 12 20.4 1/2 -5 fluids, 7.9 16240 195 0.86 based lubricating oils, 462-10-WR 16 462-10-WR 5/8 -10 15.9 16 23.9 5/8

20 462-12-WR 3/4 -12 19.1 20 27.7 3/4 -6 462-12-WR 9.5 17.2 250 1.17 462-16-WR 25 462-16-WR 1 -16 25.4 25 35.4 1 1.7 12180 MPa, the hose cover

-4 42.56.3

13.4 6160

-5 40.07.9

15.0 5800

-6 35.09.5

17.2 5075

-8 31.0 12.7

20.4 4495

-12 28.0 19.1

35.0

27.7 4060

-16 21.0 25.4

35.4 3045

42.5

40.0 -10 28.0 15.9

42.5170.0

40.0160.0 6500 35.0140.0

31.0124.0 5800 23.9 4060 28.0112.0 28.0112.0 5075 21.0 84.0

406016240 304512180

140.090 0.42 20300 min. burst 124.0 130 0.52 17980 112.0 160 0.66 16240 pressure

MPa

112.0 195 84.0 250

616024640

170.075

580023200

160.085

507520300

140.090

449517980

124.0 130

170.0

160.0 406016240

112.0 160

0.30 24640

0.35 23200 24640 0.42 20300

0.52 17980 23200 0.66 16240

75 85 90 130 160

0.30

Weight kg

750.35

0.30

850.52 0.66

0.35

0.42

0.42 0.52

32

1-1/4 462-20-WR* -20

31.8 32 43.0 1-1/4

-20 17.2 31.8

43.0 2495

17.2 68.8

The combination of high temperature The combination and high pressure of high temperature could reduce andthe high hose pressure life. could reduce the hose life.

Also available on reels under part Alsonumber available462-xx-RL on reels under part number 462-xx-RL * only with fitting series 46 * only with fitting series 46

46

48

406016240

112.0 195

304512180

84.0 250

0.86 16240 20000 1.17 12180

160

900.86 1.17

462-20-WR*

140.0

0.86 16240

1.17 12180 psi

Min. bend 0.52 0.66 radius 195 0.86 250 1.17 mm 130

68.8 335 1.50 9980 335 1.50 124.0 17800 125 Part Number without a suffix: Part the hose Number cover without has a asmooth suffix: the appearance. hose cover Part hasNumber a smooth with appearance. a suffix (WR): Part theNumber hose cover with has a suffix a wrapped (WR): the appearance. hose cover has a wrapped appearance.

air and water. For air above 462ST-8 12 -8 12.7 20.4 31.0 4450 8 43.0 17.2 2495 68.81/2 9980 335 1.50 must be pin-pricked.

462ST-10 16 5/8 -10 15.9 23.9 28.0 4000 th appearance. Part Number with a suffix (WR): the hose cover has a wrapped appearance.

Consult the chemical compatibility on 462ST-12 20 3/4 -12 section19.1 27.7 28.0 4000 could reduce the hose life.

Ca-20 Ca-20 °C up to +100 °C pages Ab-22 to detailed 25.4 information.

462ST-16 25 Ab-30 for 1 more -16 35.4 21.0 3000 462ST-20 32 1-1/4 -20 31.8 43.0 17.2 2495 ...... max. +70 °C The combination of high temperature and high pressure could reduce the hose life. ...... max. +85 °C Catalogue 4400/UK Ca-20

Fitting Series

min. burst min. bend pressure weight radius

mmpsi

5/16 462-5

124.0

462ST-5 28.0 Petroleum 4060and 8water-glycol 112.05/16 462ST-6 10 21.0 3045 84.03/8

Size MPa mm

8

462-10

-4

max. dynamic Hose working pressure O.D.

mm Inch

48

6

23200462-8

462ST-4 6 1/4 Recommended Fluids 4060 112.0

HoseHose O.D. I.D.

mm DN

46

462-5

140.0

inch

Size

48

462-4 462-6

160.0

Inch

Fitting Series 46

Fitting Series Fitting Series:

195 250

2495 9980

112.0

16000

112.0

16000 Catalogue 4400/UK

160

84.0

12000

250

1.17

68.8

9980

335

1.50

195 Catalogue 4400/UK

0.66 0.86

s

Mento Hoses and Couplings Catalogue

7

13.1-7. Parker Hydraulic Hoses

462PU No-Skive Compact hose with 2 steel wire braids as single or twin hose Recommended media: Hydraulic fluids on a mineral-oil basis, Parkrimp No-Skive Hose waterglycol and lubricating oils, air and water. For air and gas 301SN applications with a pressure exceeding 1.7 MPa, the cover must be pin-pricked. For further information see cap. 19 301SN No-Skive Main applications: For truck cranes and lifting equipment EN 853 2SN – ISO 1436 Type 2 such as forklift trucks, aerial lifts, cranes, telehandlers, lifting platforms. Ideal for over-the-sheave or reel applications.

The best solution for all the demanding medium pressure hydraulic applications in all markets, especially mobile and • No-Skive thin cover hose construction Primary Applications construction equipment. • Nitrile (NBR) inner tube General medium pressure hydraulic applications – extended uid compatibility Applicable • Suitable with 48 series ďŹ ttings Exceeds EN 857 2SC - ISO 11237 type Type Approvals Specifications: 2SC Details please ďŹ nd on pages Ab-14 and Ab-15 No-Skive hose construction Construction: Applicable SpeciďŹ cations EN 853resistance 2SN – ISO 1436 Type 2 – SAE 100 R2 AT High abrasion and shock Tube: Nitrile (NBR) Recommended Fluids High flexibility even atConstruction cold conditions Reinforcement: Two high-tensile steel wire braids Tube: Nitrile (NBR) Petroleum and water-glycol based uids, lubricating oils, High ozone-, UV- andReinforcement: weathering resistance resistance Two high tensile steel wire braids air and water.

For air above 1.7 MPa, the hose cover Cover: Premium-quality polyurethane must be pin-pricked.

Cover: Synthetic rubber Extended fluid compatibility Temperature Range Consult the chemical compatibility section on –50°C up to + 100°C Temperature Range ............ -40 °C up to +100 °C pages Ab-22 to Ab-30 for more detailed information.

Exceeding EN/ISO specifications Exception: Air: max. +70°C Water: max. +85°C Exception: Air .................................... max. +70 °C Medium pressure Standard

t /P 4LJWF IPTF DPOTUSVDUJPO FI IPTF DPOTUSVDUJPO U UJ • • t High abrasion and shock resistance • t )JHI nFYJCJMJUZ FWFO BU DPME • • conditions • t )JHI P[POF 67 XFBUIFSJOH BOE Fitting Series 48 Fitting Series: seawater resistance t &YUFOEFE nVJE DPNQBUJCJMJUZ Pressure Rating Hose Hose I.D. Medium pressure Parkrimp No-Skive t &YDFFEJOH &/ *40 TQFDJmDBUJPOT Water ............................... max. +85 °C

Part Number

Hose I.D.

Water cleaning

Inch

Size

mm

mm

6

1/4

-4

6.3

15.0

301SN-5

8

5/16

-5

7.9

16.6

301SN-6

10

3/8

-6

9.5

19.0

1/2

-8 -10

12.7 mm 15.9

22.2

5/8

301SN-4

Part 463Number

DN

Single hose No-Skive Compact

Hose O.D.

DN

inch301SN-8 301SN-10

12 Size 16

25.4

max. dynamic working pressure

MPa

40.0 Hose 35.0 O.D. 33.0 27.5 mm 25.0

min. burst pressure

psi

MPa

min. bend radius

psi

160.0 dynamic 23200 max.

5075 140.0 20300 working 4775 132.0pressure 19100 4000 110.0 16000 MPa 100.0 psi 3600 14500 5800

mm

weight

min. burst 0.42 pressure 0.55 0.67 MPa psi 0.77

115 130 180 200

20

3/4

-12

19.1

29.3

21.5

3100

86.0

12400

240

1.00

301SN-16

25

1

-16

25.4

38.1

16.5

2400

66.0

9600

32

1-1/4

-20

31.8

47.5

1800

50.0

6160 7200 5200 5800 4600 5075 4495 4060

300

301SN-20

170.0 1.73 2.14 160.0 2.96 140.0 124.0 112.0

13.4 12.5 1-1/2 -24 38.1 55.0 9.0 5/16301SN-24 540 7.9 15.0 301SN-32 50 2 -32 50.8 67.0 8.0 3/8 6 and high pressure 9.5could reduce the hose17.2 The combination of high temperature life.

1/2 8 12.7 20.4 mineral-oil 5/8 10 basis, 15.9water-23.9

42.5 1300 40.0 1150 35.0 31.0 28.0

1.49

420

36.0 500 462PU-5 8 32.0 630 462PU-6 10 462PU-8 Hydraulic fluids 12 on a 462PU-10 16 Twin hose glycol462PU-4-4 and lubricating oils, air and water.

For 28.2 air 6 1/4 4 6.4 45.5 6160 170.0 462PU-5-5 8 5/16 5 7.9 32.5 40.0 Compact 5800 160.0 • 2 wire No-Skive design and gas applications with a pressure exceeding 462PU-6-6 10 3/8 6 9.5 35.0 5075 °C Catalogue 140.0 4400/UK Ca-1water35.0 • For up to +120 constant 462PU-8-8 12 1/2 be pin-pricked.

8 12.7 41.5 31.0 4495 124.0 1.7 MPa, the cover must Fortemperature 462PU-10-10 16 5/8 10 15.9 48.7 28.0 4060 112.0

Recommended media

Min. bend radius mm

Weight kg

24640 23200 20300 17980 16240

75 85 90 130 160

0.30 0.35 0.42 0.52 0.66

24640 23200 20300 17980 16240

75 85 90 130 160

0.60 0.70 0.85 1.00 1.35

0.39

301SN-12

462PU-4 water 6 cleaning 1/4 applications 4 6.4 High pressure

463

kg

100

Suitable with further information, please referandtohigh “Chemical The combination of high temperature pressure• could reduce theNo-Skive hose life.46 series ďŹ ttings Parkrimp No-Skive Hose Resistanceâ€? in Catalogue C4400, pages 463 Ab-24 Ab-32.

Primary to Applications

463 Elite Compact High pressure water cleaning applications

High pressure water cleaners

48

Fitting Series Construction Tube: Synthetic rubber Reinforcement: Two high tensile steel wire braids Cover: Synthetic rubber in black or blue colour

Construction:

Temperature Range • • •

............... water max. +120 °C

High pressure water cleaners

Primary Applications: Tube:

Synthetic rubber

Reinforcement:

Two high tensile steel wire braids

Cover:

Synthetic rubber in blue colour water max. + 120°C

Temperature Range 2 wire No-Skive Compact design ForPressure water upRating to +120 °C constant temperature Fitting Series Fitting Series: Suitable with No-Skive 46 series fittings

min. • 2 wire No-Skive Compact design min. bend burst weight radius • For water pressure up to +120 °C constant Hose I.D. MPa psi MPa psi mm kg temperature Mpa psi Mpa psi mm Kg/mt Part • Number Hose Suitable with ďŹ ttings max. dynamic Hose No-Skive Hose 46 series max. working pressure

42.5 Part6160 40.0 Number 5800 463-5-BLU 35.0 463-5 5075 463-6-BLU 31.0 463-5-BLU 4495 462-8-BLU 463-6 28.0 4060

DN DN 8 8 10 8 12 10

The combination 463-6-BLU 10

I.D. 170.0 24640 O.D. inch 23200 Size Inch Size mm mm 160.0 5/16 20300 -5 140.0 5/16 -5 7.9 15.0 3/8 7.9 -6 5/16 -5 15.0 124.0 17980 -8 3/8 -61/2 9.5 17.4 112.0 16240

pressure 75 working 0.30 O.D. mm psi 85 MPa 0.35mm 7.9 15.0 90 40.0 0.425800 9.5 17.4 130 40.0 0.525800 12.7 20.6 40.0 5800 160 0.66

46

Pressure Rating max. dynamic min. burst pressurepressure working MPa psi MPa psi 40.0 5800 120.0 17400 40.0 5800 120.0 17400 35.0 5075 120.0 17400

of3/8high -6temperature and high40.0 pressure could the hose17400 life.

9.5 17.4 5800 reduce 120.0

min. bend min. burst weight radius pressure

MPa mm

120.0 75 120.0 75 105.0 90

psi 17400 0.31 0.31 17400 0.38 15225 kg

90

0.38

463-8

12

1/2

-8

12.7

20.6

35.0

5075

105.0

15225

110

0.48

463-8-BLU

12

1/2

-8

12.7

20.6

35.0

5075

105.0

15225

110

0.48

42.5 6160 170.0 24640 75 0.60 WKS rubber hand grip for No-Skive high pressure water cleaning hoses can be found on page Eb-16.

40.0 160.0 23200 85 life.

0.70 The combination 5800 of high temperature and high pressure could reduce the hose

Min. bend radius mm 75 90 110

Weight kg 0.31 0.38 0.48

3-wire braid compact hose with 4SP working pressures

3-Braid Hose 372

Primary Applications

Mento Hoses and Couplings Catalogue

8

13.1-8. Parker Hydraulic Hoses

No-Skive hose construction 372 Elite Compact 3-wire braid •compact – Compacthose designwith 4SP working pressures

General high pressure small bending radii hydraulic applications

• Nitrile (NBR) inner tube for extended Primary Applications: General high pressure small fluid compatibility

Type Approvals Details please find on pages Ab-14 and Ab-15

bending radii hydraulic applications Type Approvals Details please see cap. 18 Applicable Specifications Applicable Parker Specifications Parker Specifications Specifications Construction RecommendedConstruction: Fluids Tube: Nitrile (NBR) based fluids, lubricating oils, • No-Skive hose construction – Compact design Petroleum and water-glycol Tube: Nitrile (NBR) Reinforcement: Three high tensile steel wire braids air and water. For air above 1.7 MPa, the hose cover • Nitrile (NBR) inner tube for extended fluid compatibility Reinforcement: Three high tensile steel wire braids Cover: Synthetic rubber must be pin-pricked.

Recommended Fluids: Petroleum and water-glycol basedthe chemical Cover: Consult compatibility section on Synthetic rubber fluids, lubricating air and water. air °C abovepages 1.7 MPa, Temperature Range oils, ............

-40 °C up toFor +100 Ab-22 to Ab-30 for more detailed Temperature Rangeinformation.

–40°C up to + 100°C hose Air cover must be pin-pricked.

Consult • the No-Skive hose construction Exception: .................................... max. +70 °Cthe chemical Exception: Air: max. +70°C Water: max. +85°C compatibility in cap. 18 formax. more+85 detailed information.

Watersection ............................... °C – Compact design Fitting Series Fitting Series: 70

hydraulic

• Nitrile (NBR) inner tube for extended fluid compatibility

Ab-15

Pressure Rating

Hose I.D. Part Number

Hose

High pressure I.D. Part High Abrasion DN Resistance Inch Size

Hose O.D.

max. dynamic Hose working pressure

O.D. mm MPa psi DN inchmm Size mm mm Number 372-6372-6 10 10 3/8 -6 3/8 9.5 21.4 44.5 6500 -6 9.5 21.4 372-8372-8 12 12 1/2 -8 1/2 12.7 24.6 41.5 6000 -8 12.7 24.6 Petroleum and 16water-glycol based28.2 fluids, lubricating oils, 372-10 35.0 5000 372-10 16 5/8 -10 5/8 15.9 -10 15.9 28.2 372-12 water.

20 3/4 -12 19.1 32.2 35.0 5000 air and For air above 1.7 MPa, the hose cover 372-12Compact 20 3/4 -12 19.1 32.2 372-16 25 -16 25.4 39.7 28.0 4000 372-16 25 1 hose 1 with -16 25.4 39.7 3-wire braid compact must be pin-pricked.

Recommended Fluids

372TC No-Skive

ire braids

3-Braid Hose

The combination of high temperature and high pressure could reduce the hose life.

4SP working pressures Consult the chemical compatibility section on 372TC pages Ab-22 to Ab-30 for more detailed information.

The combination of high temperature and high pressure could reduce the hose life.

up to +100 °C ... max. +70 °C ... max. +85 °C

th

Hose O.D. tions mm 21.4 24.6

28.2 d Ab-15 32.2 39.7

min. burst max. dynamic pressure working pressure MPa psi MPa psi 180.0 25800 44.5 6500 166.0 24000 41.5 6000 140.0 20000 35.0 5000 140.0 20000 35.0 5000 112.0 16000 28.0 4000

burst weight 3-Braidmin.

Hose pressure 372TC mm kg

min. bend radius

MPa 120 180.0 160 166.0 210 140.0 260 140.0 310 112.0

0.73 0.90 1.09 1.36 1.78

psi 25800 24000 20000 20000 16000

Min. bend radius mm 120 160 210 260 310

Weight kg 0.73 0.90 1.09 1.36 1.78

372TC

No-Skivecompact hose construction No-Skive Compact 3-wire• braid hose with 4SP working pressures Primary Applications – Compact design General high pressure hydraulic applications • Nitrile inner tube for greater fluid high pressure hydraulic Applications: General Fitting Series 70 (NBR)Primary (typically in the mobile industry) compatibility applications (typically in the mobile • Highly abrasion resistant industry) Type Approvals Details please find on pages Ab-14 and Ab-15 • MSHA approved Type Approvals Details please see cap. 18 • Hose is suitable for temporary Parker specifications – working Applicable Applicable Specifications immersion inSpecifications mineral oil up toCatalogue 70pressures °C4400/UK and outside Parker specifications – working pressures and outside Da-2 with frequent inspections diameters according to EN 856 - 4SP

• according No-Skive hose construction diameters to EN 856 - 4SP – Compact design Construction: max. dynamic min. burst • Nitrile (NBR) inner tube for greater fluidmin. compatibility bend weight working pressure pressure Construction Recommended Fluids Tube: Nitrile (NBR) radius • Highly abrasion resistant Tube: Nitrile (NBR) Petroleum and water-glycol based fluids, lubricating Reinforcement: Threeoils, high tensile steel wire braids MPa psi MPa psi mm kg • MSHA approved Reinforcement: Three high tensile steel wire braids air and water. For air above 1.7 MPa, the hose cover Cover: Highly abrasion resistant HoseHighly is suitable for resistant temporary immersion in mineral 44.5 Cover: • 6500 180.0 25800 120 0.73 abrasion must beoil pin-pricked. The hose is suitable MSHA approved synthetic rubber up to 70 °C with frequent inspections rubber 41.5 6000 MSHA approved 166.0 synthetic24000 160for immersion 0.90 in mineral oils up to 70 °C. Temperature Range Recommended Fluids: and water-glycol based the chemical compatibility section on –40°C up to + 100°C 35.0 5000 140.0 Petroleum 20000 210Consult 1.09 Exception: Air: max. +70°C Water: max. +85°C Range 140.0 ............

-40 °C up toFor +100 Ab-22 for more detailed information. fluids, lubricating oils, air and water. air°C above 1.7 MPa, 35.0 Temperature 5000 20000 260pages 1.36 to Ab-30 .................................... max. +70 °C 310 the4000 hose Air cover must be pin-pricked.

The hose 28.0 Exception: 112.0 16000 1.78 Fitting Series: Water ............................... °C70°C. Fitting Series 70 is suitable for immersion in mineralmax. oils+85 up to

uld reduce the hose life.

es and outside

• No-Skive hose construction – Compact design • Nitrile (NBR) inner tube for greater fluid compatibility • Highly abrasion resistant • MSHA approved • Hose is suitable for temporary immersion in mineral oil up to 70 °C Consult the chemical compatibility section in cap. 18 for with frequent inspections more detailed information.

Recommended Fluids Hose I.D. Part Number

Pressure Rating

dynamic min. burst Hose Hose Petroleum and water-glycol based fluids, max. lubricating working pressure oils, pressure I.D. O.D. wire braids air and water. air Size above MPa, the hose cover max. dynamic DN For Inch mm 1.7 mm MPa psi MPa psi Hose working pressure Part O.D. 372TC-6 10 3/8 -6 9.5 21.4 44.5 180.0 25800 nt must be pin-pricked.

The hose is 6500 suitable 372TC-8 12 DN 1/2 -8inch12.7 24.6 41.5 6000 166.0 24000 Number Size mm mm MPa psi etic rubber for immersion in mineral oils to-6 70 °C.35.09.5 372TC-10 16 10 5/8 -10 3/8 15.9 up 28.2 5000 140.0 20000 372TC-6 21.4 44.5 6500 372TC-12 20 32.2 35.0 5000 140.0 20000 372TC-8the chemical 12 3/4 -12 1/219.1 -8 section 12.7 24.6 41.5 6000 on Consult compatibility 372TC-16 25 1 -16 25.4 39.7 28.0 4000 112.0 16000 372TC-10 16 5/8 -10 15.9 28.2 35.0 5000 °C up to +100 °C Replace pages to Ab-30 for more-12 detailed information. the hose Ab-22 when any deformation or damage are visible. 19.1 372TC-12 20 3/4on the hose cover 32.2 35.0 5000 The combination of high temperature and high pressure could reduce the hose life.

372TC-16 25 1 -16 25.4 39.7 28.0 4000 ...... max. +70 °C The combination of high temperature and high pressure could reduce the hose life. ...... max. +85 °C Fitting Series 70 Catalogue 4400/UK Da-2

min. bend radius mm 120

weight

min. kg burst pressure 0.73

160 MPa 210 180.0 260 166.0 310

140.0 140.0 112.0

psi 1.09 25800 1.36 24000 1.78 20000 20000 16000 0.90

Min. bend radius mm 120 160 210 260 310

Weight kg 0.73 0.90 1.09 1.36 1.78

No-Skive Multispiral

ISO 3862 Type 4SP – EN 856 Type 4SP

Mento Hoses and Couplings Catalogue

701

Primary Applications No-Skive Multispiral General high pressure hydraulic applications

9

13.1-9. Parker Hydraulic Hoses

Parkrimp No-Skive Hose 701

ISO 3862•Type 4SP – EN 856 Type 4SP No-Skive hose construction • Reinforcement of Primary Applications: four high tensile steel wires

Type Approvals Details please find on pages Ab-14 and Ab-15

General high pressure hydraulic applications Details please see cap. 18 ISO 3862 Type 4SP – EN 856 Type 4SP

Type Approvals Applicable ISO 3862 Type 4SP – EN 856 Type 4SP Specifications Construction RecommendedConstruction: Fluids • No-Skive hose construction Tube: Synthetic rubber Petroleum and water-glycol oils, rubber Tube: based fluids, lubricating Synthetic Four spirals of high-tensile steel wire wires air and water. For air Reinforcement: above 1.7 MPa, the hose cover • Reinforcement of four high tensile steel Reinforcement: Four spirals of high-tensile steel wire Synthetic rubber Cover: must be pin-pricked.

Recommended Fluids: Petroleum and water-glycol based Cover: Synthetic rubber Consult the chemical compatibility section on fluids, lubricating oils,............ air and-40 water.

For air above 1.7 MPa, Temperature Rangeinformation.

–40°C up to + 100°C Temperature Range °C up to +100 °C for more detailed pages Ab-22 to Ab-30 the hose cover must be pin-pricked. max.

Consult the chemical .................................... +70 °C Exception: Air Exception: Air: max. +70°C Water: max. +85°C • No-Skive hose construction compatibilityWater section in cap. 18 for more ............................... max.detailed +85 °C information.

• Reinforcement of Fitting Series Fitting Series: 70

Applicable Specifications

four high tensile steel wires Hose I.D.

High pressure Part Number Resistance High Abrasion Hose I.D.

Hose O.D.

Pressure Rating max. dynamic Hose working pressure

Part O.D. DN Inch Size mm mm MPa psi Number DN inch Size mm mm Recommended Fluids 701-6 10 3/8 -6 9.5 21.4 45.0 6500 701-6 9.5 21.4 701-8 Multispiral 1/2 3/8 -8 12.7 41.5 6000 Petroleum and1012water-glycol based-624.6 fluids, lubricating oils, 701-8 1216 5/8 1/2 -828.2 12.7 24.6 701-10 -10 15.9 35.0 5000 SAEair100R12 – EN 856 Type R12 – and water.

For air above 1.7 MPa, the hose cover 701-12 -12 19.1 32.2 35.0 5000 701-10 1620 3/4 5/8 -10 15.9 28.2 701-16 1 -16 25.4 39.7 28.0 4000 ISOmust 3862 Type R12 701-12 2025 3/4 -12 19.1 32.2 be pin-pricked.

The combination and high reduce the hose 25.4 life.

701-16 of high temperature 25 1 pressure could-16 39.7

721TC No-Skive

Parkrimp No-Skive Hose min. burst min. bend 721TC

max. dynamic pressure working pressure MPa

MPa 45.0 166.0 41.5 140.0 140.0 35.0 112.0 35.0 28.0 180.0

radius

psi

mm

26000

180

psi 6500 24000 6000 20000 20000 5000 16000 5000 4000

min. burst weight pressure

MPa 180.0 230 166.0 250 300 140.0 340 140.0 112.0

kg

0.78 0.93 1.15 1.58 2.04

psi 26000 24000 20000 20000 16000

Min. bend radius mm 180 230 250 300 340

Weight kg 0.78 0.93 1.15 1.58 2.04

Consult the chemical section on Parkrimp No-Skive Hose The combination of highcompatibility temperature and high pressure could reduce the hose life.

0 °C pages Ab-22 to Ab-30 for more detailed information.

721TC • No-Skive hose construction 0 °C SAE 100R12 specified No-Skive Multispiral SAE• Half 100R12 – EN 856 Type R12 – ISO 3862 Type R12 5 °C Primary Applications minimum bend radius Fitting Series 70 High-pressure extremely small bending radii applications • Highly abrasion resistant Primary Applications: High-pressure extremely small • MSHA approved bending radii applications Type Approvals • Hose is suitable for temporary Details please find on pages Ab-14 and Ab-15 Type Approvals Details please see cap. 18 immersion in mineral oil up to 70 °C Applicable SAE 100R12 – EN 856 Type R12 – with frequent inspections Applicable Specifications

721TC

Specifications ISO4400/UK 3862 Type R12 Catalogue Construction: • No-Skive hose construction max. dynamic min. burst min. bend Construction Recommended Fluids Tube: Synthetic rubber weight working pressure pressureminimum bend radius radius • Half SAE 100R12 specified Tube: Synthetic rubber Petroleum and water-glycol based fluids, lubricating Reinforcement: Four oils, spirals of high-tensile steel wire •• No-Skive hose construction MPa psiFour MPa psi wire mm kg For air above 1.7 MPa, the hose cover Reinforcement: spirals of high-tensile steel air and water.

Highly abrasion resistant Cover: Highly abrasion resistant Cover: High abrasion resistance must be pin-pricked.

MSHA approved SAE 100R12 specified 45.0 •• Half 6500 180.0 26000 180 0.78 MSHA approved synthetic rubber Consult the chemical compatibility section on MSHA approved synthetic rubber 41.5 6000 166.0 24000 0.93 • minimum Hose is suitable for temporary immersion in230 mineral oil bend radius Temperature Range –40°C up to + 125°C pages Ab-22 to Ab-30 for more detailed information.

140.0 20000 250 1.15 up 5000 to 70 °C with frequent inspections ns 35.0 Exception: Air: max. +70°C Water: max. +85°C Temperature Range ............

-40 °C up to +125 °C Highly resistant 35.0 • 5000 abrasion 140.0 20000 300 based1.58 Recommended Fluids: Petroleum and Exception: Air .................................... max.water-glycol +70 °C Fitting Series: 28.0 • 4000 approved 112.0 16000 340 1.7 MPa, 2.04 MSHA fluids, lubricating oils, air and water.

For+85 air °C above Water ............................... max.

Fitting Series 71 ose life. the hose cover must be pin-pricked.

Consult the chemical • Hose is suitable for temporary compatibility section in cap. 18 for more detailed information.

2

°C °C °C

SAE 100R12 – EN 856 Type R12 – ISO 3862 Type R12

Da-5

immersion in mineral oil up to 70 °C with frequent inspections Hose I.D.

Part Number

Hose I.D.

Recommended DN Inch Fluids Size mm

Hose O.D. mm

Pressure Rating max. dynamic working pressure MPa

Hose psi

Part O.D. 721TC-6 10 water-glycol 3/8 -6 9.5based 20.0 fluids,28.0 4000 Petroleum and lubricating oils, Number Size mm mm 721TC-8 12DN 1/2 -8inch12.7 24.0 28.0 4000 air721TC-10 and water.16For air above the28.0 hose cover -103/8 15.91.7 MPa, 27.0 4000 721TC-6 10 5/8 -6 9.5 20.0 721TC-12 20 12 3/4 -121/2 19.1 31.0 28.0 4000 721TC-8 -8 12.7 24.0 must be pin-pricked.

721TC-16 25 16 1 -165/8 25.4 38.0 28.0 4000 721TC-10 -10 15.9 27.0 721TC-20 32 20 1-1/4 -20 47.0 21.0 3000 Consult the chemical compatibility on 721TC-12 3/4 31.8 -12section 19.1 31.0 721TC-24 40 -24 53.0 17.5 2500 721TC-16 25 1-1/2 1 38.1 -16 25.4 38.0 pages Ab-2250to Ab-30 for more67.0 detailed17.5 information.

721TC-32 2 -32 50.8 2500

721TC-20 32 1-1/4 -20 31.8 47.0 Replace the hose when any deformation or damage 4400/UK 721TC-24 40 1-1/2on the hose cover -24 are visible.Catalogue 38.1 53.0 Da-5 The combination of high temperature and high pressure could reduce the hose life.

721TC-32 50 2 -32 50.8 67.0

min. burst pressure MPa max. dynamic psi working pressure

112.0

MPa 112.0 112.0 28.0 112.0 28.0 112.0 28.0 84.0 28.0 70.0

28.0 70.0 21.0 17.5 17.5

16000

psi 16000

71

mm 65

weight

min. kg burst pressure

MPa 90

0.59 0.80

16000 4000

100 112.0

16000 4000

150 112.0

1.99

250

2.99

16000 4000 12000 4000 10000

4000 10000 3000 2500 2500

The combination of high temperature and high pressure could reduce the hose life.

Fitting Series

min. bend radius

1.10

120 112.0

1.40

210 112.0

2.59

112.0 320 84.0 70.0 70.0

4.09

psi 16000 16000 16000 16000 16000 12000 10000 10000

Min. bend radius mm 65 90 100 120 150 210 250 320

Weight kg 0.59 0.80 1.10 1.40 1.99 2.59 2.99 4.09

High pressure Standard

731 Mento Hoses and Couplings Catalogue

Parkrimp No-Skive Hose

731

13.1-10. Parker Hydraulic Hoses

Parkrimp No-Skive Hose No-Skive Multispiral ISO 3862 Type 4SH – EN 856 Type 4SH 731

10

731 No-Skive Multispiral ISO 3862 Type 4SH – EN 856 Type 4SH General high pressure hydraulic applications ISO 3862 Type 4SH – EN 856 Type 4SH

Primary Applications:

Type 4SH

• No-Skive hose construction • Reinforcement of four high Applicable tensile steel wires

Primary Applications General high pressure hydraulic applications

Applicable Specifications ISO 3862 Type 4SH – EN 856 Type 4SH

Construction • No-Skive hose construction Tube: Synthetic rubber Four steel spirals ofwires high-tensile steel wire • Reinforcement of fourReinforcement: high tensile Cover: Synthetic rubber Recommended Fluids: Petroleum and water-glycol based Temperature Range ............ -40 °C up to +100 °C fluids, lubricating oils, air Exception: and water.AirFor air above 1.7 MPa, .................................... max. +70 °C ............................... max. +85 °C the hose cover must be pin-pricked.Water Consult the chemical • No-Skive hose construction compatibility section in cap.

18 for more detailed information.

Specifications Construction: Tube: Synthetic rubber Recommended Fluids Reinforcement: Fouroils,spirals of high-tensile steel wire Petroleum and water-glycol based fluids, lubricating air and water. For air above 1.7 MPa, the hose cover Cover: Synthetic rubber must be pin-pricked.

ConsultTemperature the chemical compatibility section on –40°C up to + 100°C Range pages Ab-22 to Ab-30 for more detailed information.

Exception: Air: max. +70°C Water: max. +85°C FittingFitting Series Series:

• Reinforcement of four high tensile steel wires Hose I.D.

cations

Part Number

Pressure Rating

Hose I.D. DN

Inch

Size

max. dynamic working pressure

Hose O.D. mm

mm

MPa

psi

ensile steel wire

731-12

20

3/4

-12

19.1

32.0

731-16

25

1

-16

25.4

39.0

min. burst pressure

min. bend radius

MPa

psi

6000

280

5500

340

4200 3600

MPa 42.0 38.0 32.0 29.0 25.0

116.0 100.0

16800 14400

psi 6000 5500 4700 4200 3600

weight

mm

24000 max.168.0 dynamic 152.0 22000 working pressure18800 4700 130.0

Hose42.0 38.0 731-20 32 1-1/4 -20 31.8 45.0 O.D. 32.0 Part 731-24 40 1-1/2 -24 38.1 53.0 29.0 Number mm25.0 DN inch 731-32 Size 50 2 -32mm 50.8 68.0 Tough Cover (MSHA approved) can be ordered with the extension „TC“ e. g. 731TC-..

731-12 20 3/4 -12 19.1 32.0 The combination of high temperature and high pressure could reduce the hose life.

Recommended Fluids 731-16 25 1 -16 25.4 39.0 Petroleum and32water-glycol oils, 731-20 1-1/4 based -20fluids, lubricating 31.8 45.0 air 731-24 and water. 40 For air above 1-1/2 1.7 MPa, -24 the hose 31.8 cover 53.0 731-32 50 2 -32 50.8 68.0 be pin-pricked. must

SH

73

460

kg 1.72 min. burst 2.14 pressure 2.96

560 700

MPa 168.0 152.0 130.0 116.0 100.0

3.20 5.30

psi 24000 22000 18800 16800 14400

Min. bend radius mm 280 340 460 560 700

Weight kg 1.72 2.14 2.96 3.20 5.30

Tough Cover (MSHA approved) can besection ordered on with the extension „TC“ e. g. 731TC-..

Consult the chemical compatibility The combination of high temperature and high pressure could reduce the hose life. pages Ab-22 to Ab-30 for more detailed information.

0 °C up to +100 °C .......... max. +70 °C .......... max. +85 °C

Da-7

Catalogue 4400/UK

73

Fitting Series

Parkrimp No-Skive Hose P35

High pressure Standard

Parkrimp No-Skive Hose P35 P35

P35 No-Skive Multispiral SAE 100R13 – ISO 3862 Type R13 – EN 856 Type R13 No-Skive Multispiral

Hose O.D.

mm

SAE 100R13 – ISO 3862 Type R13 –

min.

ENburst 856 Type R13 pressure

min. bend radius

weight

MPa Primary Applications psi

mm

kg

max. dynamic working pressure

mm

MPa

psi

32.0

42.0

6000

168.0 Generally extremely 24000 280flow hydraulic 1.72 high pressure large

25.4

39.0

38.0

5500

152.0 applications 22000

340

2.14

31.8

45.0

32.0

4700

130.0 Type Approvals 18800

460

2.96

38.1 50.8

53.0 68.0

29.0 25.0

4200 3600

find on pages Ab-14560 and Ab-15 116.0 Details please16800 100.0 Applicable 14400 700 Specifications

19.1 – R13

the extension „TC“ e. g. 731TC-.. ure could reduce the hose life.

flow hydraulic

Mobile/ industrial hydraulics: Generally extremely high pressure large flow hydraulic applications Type Approvals Details please see cap. 18 • No-Skive hose construction • Reinforcement steel 100R13 – ISO 3862 Type R13 – Applicableof six high tensile SAE wires EN 856 Type R13 Specifications Primary Applications:

Mobile/ industrial hydraulics:

3.20 5.30

• No-Skive hose construction SAE 100R13 – ISO 3862 Type R13 – EN 856 Type R13 • Reinforcement of six high tensile steel wires Construction Tube: Synthetic rubber Recommended Fluids: Petroleum and water-glycol based Six spirals of high-tensile steel wire fluids, lubricating oils, air Reinforcement: and water.

For air above 1.7 MPa, Cover: Synthetic rubber the hose cover must be pin-pricked. Consult the chemical Temperature Range ............ -40 °C up to +125 °C in cap.

18 for more detailed information.

•compatibility No-Skivesection hose construction Exception: Air .................................... max. +70 °C Water ............................... max. +85 °C

• Reinforcement of six high tensile steel wires

Construction: Tube: Synthetic rubber Recommended Fluids Reinforcement: Six spirals of high-tensile steel wire Petroleum and water-glycol based fluids, lubricating oils, air andCover: water. For air above 1.7 MPa, the hose Synthetic cover rubber must be pin-pricked.

Range ConsultTemperature the chemical compatibility section on –40°C up to + 125°C pages Ab-22 to Ab-30 for more detailed information.

Exception: Air: max. +70°C Water: max. +85°C Fitting Series: Fitting Series S6

d Ab-15

N 856 Type R13

ile steel wire

Hose I.D.

Part Number

P35-32

Part Number P35-32

DN

Da-7 Recommended 50

Hose I.D.

Hose O.D.

max. dynamic working pressure

DN

Inch

Size

mm

mm

MPa

50

2

-32

50.8

71.0

35.0

Hose The combination of high temperature and high pressure could reduce the hose life.

O.D. inch Size mm mm Catalogue 4400/UK 2" -32 50.8 71.0

Fluids

psi

Pressure Rating

min. burst pressure MPa

min. bend radius

psi

20000 max.140.0 dynamic working pressure 5000

MPa 35.0

psi 5000

Petroleum and water-glycol basedand fluids, lubricating oils, The combination of high temperature high pressure could reduce the hose life. air and water. For air above 1.7 MPa, the hose cover must be pin-pricked.

weight

mm 630

kg 7.48 min. burst pressure

MPa 140.0

psi 20000

Min. bend radius mm 630

Weight kg 7.48

787TC

Mento Hoses and Couplings Catalogue

No-Skive Compact Spiral

11

13.1-11. Parker Hydraulic Hoses

ISO 18752-DC

Parkrimp No-Skive Hose t UIF CFOE SBEJVT PG 4"& 3 4#

787TC No-Skive Compact Spiral ISO 18752-DC

t $POTUBOU XPSLJOH QSFTTVSF PG .1B t 3FEVDFE 0 % BOE OFX DPOTUSVDUJPO lead to superior flexibilityFluids: Petroleum base hydraulic fluids and Recommended t MFTT FGGPSU UP CFOE lubricating oils. Wide Compatibility exceeding Column III, with additional chemical resistance, especialy for diesel and t 8FJHIU SFEVDUJPO o VQ UP biodiesel. Consult the chemical compatibility section in cap. t )JHIMZ BCSBTJPO SFTJTUBOU Primary Applications 18 for more detailed information. t .4)" BQQSPWFE On- & offshore, construction, injection moulding, mining Primary Applications: On- & offshore, construction, t )PTF JT TVJUBCMF GPS UFNQPSBSZ injection moulding, mining JNNFSTJPO JO NJOFSBM PJM VQ UP ¥$ Applicable Specifications Applicable SAE 100R13 – ISO 3862 Type R13 – with frequent inspections t UIF CFOE SBEJVT PG 4"& 3 • 1/2 the bend radius of SAE 100R13 4"& 3 o *40 5ZQF 3 o *40 %$ Specifications ISO 18752-DC • Constant working pressure of 35.0 MPa Construction: t $POTUBOU XPSLJOH QSFTTVSF PG .1B Construction 3FDPNNFOEFE 'MVJET O.D. and new construction lead to superior Tube: Proprietary synthetic rubber • ReducedProprietary t 3FEVDFE 0 % BOE OFX DPOTUSVDUJPO Tube: synthetic rubber Petroleum base hydraulic fluids and lubricating oils. flexibility Reinforcement: Four or six spirals of high-tensile 3FJOGPSDFNFOU 'PVS PS TJY TQJSBMT PG IJHI UFOTJMF TUFFM XJSF 8JEF $PNQBUJCJMJUZ FYDFFEJOH $PMVNO *** XJUI BEEJUJPOBM 1/3 lessto effort to bend flexibility superior • lead steel wire $PWFS )JHI BCSBTJPO SFTJTUBODF chemical resistance, especialy for diesel and biodiesel.

Cover: High abrasion resistance MSHA – up to 26 % • Weight reduction t MFTT FGGPSU UP CFOE .4)" BQQSPWFE TZOUIFUJD SVCCFS For chemical compatibility please contact approved synthetic rubber • Highly abrasion resistant )1%&@IFMQEFTL!QBSLFS DPN t 8FJHIU SFEVDUJPO o VQ UP Temperature Range –40°C up to + 125°C 5FNQFSBUVSF 3BOHF ............ ¥$ VQ UP ¥$ • MSHA approved Exception: Air: max. +70°C Water: max. +85°C t )JHIMZ BCSBTJPO SFTJTUBOU Exception: Air .................................... NBY ¥$ Fitting Series: • Hose is suitable for temporary immersion in mineral oil t .4)" BQQSPWFE 8BUFS Fitting Series 77 up to 70 °C with............................... NBY ¥$ frequent inspections

ng

t )PTF JT TVJUBCMF GPS UFNQPSBSZ JNNFSTJPO JO NJOFSBM PJM VQ UP ÂĄ$ Hose I.D. Pressure Rating with frequent inspections Part Number

Hose

XJSF

ÂĄ$ ÂĄ$ ÂĄ$

max.

Hose working pressure

Hose O.D.

I.D. 3FDPNNFOEFE 'MVJET Part

O.D. DN Inch Size mm mm MPa psi DN inch fluids Size mm Number base Petroleum hydraulic and lubricating oils.mm 787TC-8 -8 12.7 35 5000 787TC-8 1212 1/2 1/2 -821.1 12.7 21.1 8JEF $PNQBUJCJMJUZ FYDFFEJOH $PMVNO *** XJUI BEEJUJPOBM 787TC-10 16 5/8 -10 15.9 23.9 35 5000 787TC-10 1620 3/4 5/8 -1027.9 15.9 23.9 787TC-12 -12 19.1 35 5000 chemical resistance, especialy for diesel and biodiesel.

787TC-16 1 -16 25.4 -12 35.7 35 5000 787TC-12 2025 3/4 19.1 27.9 787TC-20 31.5 35 5000 For chemical compatibility contact25.4 787TC-16 2532 1-1/4 1-20 please -1644.9 35.7 3FQMBDF UIF IPTF XIFO BOZ EFGPSNBUJPO PS EBNBHF PO UIF IPTF DPWFS BSF WJTJCMF 787TC-20 32 1-1/4 -20 31.5 44.9 )1%&@IFMQEFTL!QBSLFS DPN The combination of high temperature and high pressure could reduce the hose life.

Pressure Rating

max. dynamic min. burst pressure working pressure MPa MPa 140 35 140 35 140 140 35 140 35 35

psi psi 20000 5000 20000 5000 20000 20000 5000 20000 5000 5000

min. bend min. burst weight radius pressure

MPa 90 140 100 140 120 150 140 210 140 140 mm

kg 0.67 0.80 1.16 1.74 2.89

psi 20000 20000 20000 20000 20000

Min. bend radius mm 90 100 120 150 210

Weight kg 0.67 0.80 1.16 1.74 2.89

The combination of high temperature andNo-Skive high pressureHose could reduce the hose life.

Parkrimp High pressure High Abrasion Resistance

Parkrimp No-Skive Hose 791TC / 792TC

791TC / 792TC

77 SAE 100R15 – ISO3862 Type R15 791TC / 792TC No-Skive Multispiral 791TC / 792TC

Fitting Series

No-Skive Multispiral

Mobile hydraulics: Hydrostatic drives General industrial hydraulics: Injection moulding machines Test stands Details please see cap. 18 SAE 100R15 – ISO3862 Type R15

Primary Applications:

SAE 100R15 – ISO3862 Type R15

Type Approvals

• No-Skive hose construction Applicable • 792TC: Nitrile (NBR) inner tube Mobile hydraulics: Hydrostatic drives Catalogue 4400/UK – extended uid compatibility General industrial hydraulics: InjectionDa-14 moulding machines Specifications max. min. • Constant working pressure of 42.0 MPa Test stands min. bend weight• Highly Construction: abrasion resistant working burst pressure radius • pressure No-Skive hose construction Type Approvals • MSHA approved Tube 791TC: Synthetic rubber Details pages Ab-14 and mm Ab-15 MPa psi Nitrile (NBR) MPa psi kg • Hose is suitable for temporary • 792TC: innerplease tubeďŹ nd–onextended fluid compatibility immersion in mineral oil up to 70Nitrile °C Tube 792TC: (NBR) • Constant pressure 42.0 MPa Applicable of SpeciďŹ cations 35 5000 working140 20000 90 0.67 with frequent inspections

Pressure Rating Primary Applications

35

ines35 35 35

TJCMF se life.

• No-Skive hose construction • 792TC: NitrileSAE(NBR) inner tube 100R15 – ISO3862 Type R15 Reinforcement: Four or six spirals of high-tensile • Highly 5000abrasion resistant 140 20000 100 0.80 steel wire – extended uid compatibility Construction Recommended Fluids 5000approved 140 20000 120 1.16 • MSHA Tube 791TC: Synthetic rubber Petroleum and water-glycol based uids, lubricating Cover: Highoils,abrasion resistance •• Constant working pressure ofin 42.0 MPa 5000 140 20000 150 cover Tube 792TC: Nitrile (NBR) Hose is suitable for temporary immersion mineral oil1.74air and water. For air above 1.7 MPa, the hoseMSHA approved synthetic rubber Reinforcement: Four or six spirals of high-tensile 140 20000 210 steel wire2.89must be pin-pricked. • Highly abrasion resistant up 5000 to 70 °C with frequent inspections Cover: High abrasion resistance Consult Temperature the chemical compatibility section on Range –40°C up to + 100°C MSHA synthetic rubber to Ab-30 for more detailed information.

Recommended Fluids: PPetroleum andapproved water-glycol based pages Ab-22 • MSHA approved Exception: Air: max. +70°C Water: max. +85°C fluids, lubricating oils, air and water. For air above 1.7 MPa, Range ............ -40 °C up to +100 °C • Hose is suitable for temporary Fitting Series: the hose cover must beTemperature pin-pricked.

Consult the chemical Exception: Air .................................... max. +70 °C Fitting Series 79 compatibility section cap. 18 forWater more detailed information. ............................... max. immersion ininmineral oil up to 70 °C+85 °C with frequent inspections Hose I.D. Part Number

Recommended Fluids

wire

Pressure Rating Hose I.D.

Hose O.D.

max. dynamic working pressure

MPa Hose 792TC-12 3/4 -12 lubricating 19.1 32.0 42.0 Petroleum and water-glycol based20 uids, oils, Part O.D. 792TC-16 25 1 -16 25.4 39.0 42.0 inch Size mm mm air Number and water. DN For air above 1.7 MPa, the hose cover 791TC-20 32 1-1/4 -20 31.8 50.0 42.0 792TC-12 20 3/4 -12 1-1/2 -24 19.1 32.0 791TC-24 40 38.1 57.0 42.0 be pin-pricked. must Replace on the hose cover are visible.

792TC-16 25 1the hose when any deformation -16 or damage25.4 39.0 DN

Inch

Size

mm

mm

The combination of high temperature and high pressure could reduce the hose life.

min. burst pressure

max.MPadynamicpsi 6000 working168.0 pressure24000 6000 168.0 24000 MPa psi 24000 6000 168.0 42.0 168.0 600024000 6000 42.0 6000 psi

Consult the chemical compatibility section 31.8 on 791TC-20 32 1-1/4 -20 50.0 42.0 6000 Ab-22 to for more detailed information. pages 791TC-24 40 Ab-301-1/2 -24 38.1 57.0 42.0 6000 The combination of high temperature and high pressure could reduce the hose life.

Da-14 °C °C Fitting

Catalogue 4400/UK

Series

79

min. bend radius

weight

kg min. burst 1.59 pressure 2.20 MPa psi 250 3.69 168.0 24000 305 4.79 168.0 24000 mm

265 330

168.0 168.0

24000 24000

Min. bend radius mm 265 330

Weight kg 1.59 2.20

250 305

3.69 4.79

797TC

Hose 797TC

797TC No-Skive Compact Spiral ISO 18752-DC ISO 18752-DC

• 1/2 the bend radius of SAE 100R15 • Constant working pressure of 42.0 MPa Recommended Fluids: Petroleum base hydraulic fluids and lubricat• Reduced O.D. and new construction Wideexibility Compatibility exceeding Column III, with additional leading to oils. superior especialy for diesel and biodiesel. Consult the • 1/3chemical less effortresistance, to bend chemical compatibility in cap. 18 for more detailed informa• Weight reduction – up to 26section % tion. • Highly abrasion resistant Primary Applications: On- & offshore, construction, • MSHA approved • Hose is suitable for temporary injection moulding, mining Applicable immersion in mineral oil up to 70SAE °C 100R15 – ISO3862 Type R15 withSpecifications frequent inspections

Primary Applications On- & offshore, construction, injection moulding, mining

Applicable SpeciďŹ cations

• 1/2 the bend radius of SAE 100R15 • Constant working pressure of 42.0 MPa • Reduced O.D. and new construction lead to superior exibility • 1/3 less effort to bend • Weight reduction – up to 26 % • Highly abrasion resistant Hose I.D. Pressure Rating • MSHA approved Hose max. dynamic min. burst •Part Hose is suitable for temporary O.D. working pressure pressure MPa psi MPa psi Number DN mm 70 °C mm immersion in inch mineralSize oil up to 797TC-8 12 1/2 -8 12.7 21.1 42 6000 168 24000 with frequent inspections 797TC-10 16 5/8 -10 15.9 23.9 42 6000 168 24000 • • • • • • • •

SAE 100R15 – ISO3862 Type R15

1/2 the bend radius of SAE 100R15 Construction: Construction Recommended Constant working pressure of 42.0 MPa Tube: Fluids Proprietary synthetic rubber Tube: Proprietary synthetic rubber Petroleum base hydraulic uids and lubricating oils.

Reduced O.D. and new construction lead to superior flexibility Reinforcement: Four spirals of high-tensile steel wire Reinforcement: Four spirals of high-tensile steel wire Wide Compatibility exceeding Column III, with additional 1/3 less effort to bend High abrasion resistance Cover: High abrasion resistance chemicalCover: resistance, especialy for diesel and biodiesel.

MSHA approved synthetic rubber Weight reduction – up to 26 % MSHA approved synthetic rubber For chemical compatibility please contact Temperature Range –40°C up to + 125°C HPDE_helpdesk@parker.com Highly abrasion resistant Exception: Air: max. +70°C Water: max. +85°C MSHA approved Temperature Range ............ -40 °C up to +125 °C Exception: Air .................................... max. +70 °C Hose is suitable for temporary immersion in mineral oil up to 70 77 Fitting Series: °C with frequent inspections Water ............................... max. +85 °C Fitting Series

Hose I.D.

DN

Inch

797TC-8

12

797TC-10

16

797TC-12 797TC-16

Hose O.D.

max. dynamic working pressure

min. burst pressure

mm

MPa

psi

MPa

psi

mm

kg

1/2

-8

12.7

21.1

42

6000

168

24000

100

0.67

5/8

-10

15.9

23.9

42

6000

168

24000

115

0.80

20

3/4

-12

19.1

27.9

42

6000

168

24000

135

1.16

25

1

-16

25.4

35.7

42

6000

168

24000

165

1.74

6000 6000

168 168

24000 24000

Fitting Series

max. dynamic working pressure

m

mm

MPa

2.7

21.1

42

5.9 l

23.9

42

– 27.9

42

35.7

42

the hose cover are visible. e could reduce the hose life.

D BQQMJDBUJPOT

Hose I.D.

77

Pressure Rating

min. burst

Min. bend radius mm 280 340 460 560 700

Weight kg 1.7 2.2 2.6 3.4 4.8

ParLock Hose

Applicable Specifications min. bend weight pressure radius ( Applicable&YDFFET *40 5ZQF 41 o %*/ &/ 5ZQF 41 Specifications

H31 ParLock Multispiral Exceeds ISO 3862 Type 4SP – DIN EN 856 Type 4SP Construction 3FDPNNFOEFE 'MVJET psi MPa psi mm &YDFFET *40 5ZQF 41 o %*/ &/ 5ZQF 41

kg

6000 Construction Tube:

168 24000 100 0.67 Primary General based high pressure hydraulic oils, 3FDPNNFOEFE 'MVJET Synthetic rubber Petroleum and water-glycol fluids, lubricating Applications: 168 rubber 24000 115 0.80 and Tube:6000 Synthetic Petroleum water-glycol basedapplications fluids, lubricating oils, 3FJOGPSDFNFOU 'PVS TQJSBMT PG IJHI UFOTJMF TUFFM XJSF BJS BOE XBUFS 'PS BJS BCPWF .1B UIF IPTF DPWFS Type Approvals Details please see cap. 18 6000 168 24000 135 1.16 3FJOGPSDFNFOU 'PVS TQJSBMT PG IJHI UFOTJMF TUFFM XJSF BJS BOE XBUFS 'PS BJS BCPWF .1B UIF IPTF DPWFS Cover: Synthetic rubber must be pin-pricked.

Applicable

Exceeds ISO 3862 Type 4SP –

24000 165 1.74 Specifications DIN EN 856 Type 4SP on must be pin-pricked.

Consult the chemical compatibility section Consult the Construction: chemical compatibility section on detailed information.

5FNQFSBUVSF 3BOHF ............ ÂĄ$ VQ UP ÂĄ$ pages Ab-22 to Ab-30 for more Tube: Synthetic rubber 5FNQFSBUVSF 3BOHF pages Ab-22 to Ab-30 for more detailed information.

Exception: ............ ¥$ VQ UP ¥$ Air .................................... NBY ¥$ Reinforcement: Four spirals of high-tensile steel wire • Interlock technology .................................... NBY ¥$ Cover: Synthetic rubber Air 8BUFS steel ............................... NBY ¥$ • Exception: Reinforcement of four high tensile wires Temperature Range –40°C up to + 100°C Recommended Fluids: Petroleum and water-glycol based fluids, lubri 8BUFS ............................... NBY ¥$ Fitting Series Exception: Air: max. +70°C Water: max. +85°C cating oils, air and water. For air above 1.7 MPa, the hose cover Fitting must Series External skiving (size -4 up to -8) VS Fitting Series: be pin-pricked. Consult the chemical compatibility section in cap. 18 External skiving (sizeskiving -4 up to(size -8) -4 up to -8) VS External for more detailed information.

Internal and external skiving TJ[F VQ UP

V4 Internal and external skiving (size -10 up to -16) t *OUFSMPDL UFDIOPMPHZ Internal and external skiving TJ[F VQ UP

V4 6000 Cover:

168 rubber Synthetic

t 3FJOGPSDFNFOU PG Hose I.D. four high tensile steel wires

b-14 and Ab-15

Weight kg 0.67 0.80 1.16 1.74

ParLock Hose

High pressure

Hose max. dynamic min. burst Part O.D. working pressure pressure Primary Applications MPa psi MPa psi Number DN inch Size mm mm t *OUFSMPDL UFDIOPMPHZ Primary Applications (FOFSBM IJHI QSFTTVSF IZESBVMJD BQQMJDBUJPOT H29-12 19 3/4 -12 19.1 32.2 43.0 6250 172.0 25000 t *OUFSMPDL UFDIOPMPHZ (FOFSBM IJHI QSFTTVSF IZESBVMJD BQQMJDBUJPOT H29-16 25 1 -16 25.4 38.7 40.0t 3FJOGPSDFNFOU PG 5800 160.0 23200 H29-20 31 1 1/4 -20 31.8 45.5 35.0 four high 5000 tensile 140.0 20000 t 3FJOGPSDFNFOU PG steel wires Type Approvals H29-24 38 1-1/2 -24 38.1 53.5 31.0 4500 124.0 18000 steel wires Type Approvals %FUBJMT QMFBTF mOE PO QBHFT Ab-14 and Ab-15 68.1 four high H29-32 51 2 -32 50.8 28.0 tensile4050 112.0 16200 %FUBJMT QMFBTF mOE PO QBHFT Ab-14 and Ab-15 The combination of high temperature and high pressure could reduce the hose life.

Hose O.D.

Min. bend radius mm 100 115 135 165

Petroleum base hydraulic uids and lubricating oils.

ParLock Hose High pressure Standard ( 4SH Parlock Multispiral Hose Exceeds ISO 3862-1 Type 4SH, EN( 856 Type Wide Compatibility exceeding Column III, with additional Standard construction: Oil-resistant rubber inner tube. Four-spiral chemical resistance, H31 especialy for diesel and biodiesel. Hose high-tensile steel wire reinforcement, oil- and weatherresistant, H31 For chemical compatibility please contact black, synthetic rubber cover ParLock Multispiral Applications: The hose is designed for use with: petroleum base ParLock Exceeds Multispiral ISO 3862 Type 4SP – HPDE_helpdesk@parker.com hydraulic fluids an lubricating oils within a temperature range Exceeds ISO 3862 Type 4SP – Catalogue Da-16 Temperature Range –40°C up4400/UK to + 100°C DIN EN 856 Type 4SP Exception: Air: max. +70°C Water: max. +85°C DIN EN 856 Type 4SP

°C up to +125 °C ........ max. +70 °C ........ max. +85 °C

Pressure Rating

Pressure Rating Pressure Rating

max. max. dynamic min.

Hose Hose Hose Min. bend min. burst min. bend weight working pressure burst pressure I.D. O.D. radiusradius PartPart Number O.D. working pressure pressure max. min.

Hose Hose min. bend weight working burst pressure MPaMPa radiuspsi psi Number DN inchI.D. DN Size O.D. mm Inch Size mm mmmmpressure MPaMPa psi psi mm mm kg H31-4 6 1/4 -4 6.3 17.8 50.0 MPa 7250 psi 200.0 mm 29000 120 DN Inch Size 6 mm mm MPa psi kg -4 17.8 50.0 7250 H31-6 10 H31-4 3/8 -61/4 9.56.3 21.4 44.5 6450 200.0178.0 2900025800 120 1300.73 H31-6 10 3/8 -6 9.5 21.4 44.5 6450 178.0 25800 130 6 1/2 1/4 -4 6.3 17.8 12.7 50.0 24.6 7250 41.5 200.0 6000 29000 166.0 120 0.73 H31-8 H31-4 12 -8 24000 1800.91 1/2 -8 15.9 12.7 44.5 24.628.5 41.5 39.0 178.0 60005650 25800 166.0156.0 130 24000 10 5/8 3/8 -6 12 -10 9.5 21.4 6450 0.91 180 H31-10H31-6 16 H31-8 22600 2251.08 3FDPNNFOEFE 'MVJET 15.9 41.5 28.532.0 39.0 35.0 166.0 56505000 24000 156.0140.0 180 22600 12 3/4 1/2 -8 16 12.7 24.6 19.1 6000 1.08 225 H31-12H31-8 20 H31-10 -125/8 -10 20300 2801.39 Petroleum and water-glycol based fluids,-16 lubricating oils, 3/4 -12 19.1 39.0 32.039.7 35.0 31.0 156.0 50004500 22600 140.0124.0 225 20300 H31-16H31-10 25 H31-12 1 18000 3551.73 16 5/8 -10 20 15.9 28.5 25.4 5650 1.39 280 BJS BOE XBUFS 'PS BJS BCPWF .1B UIF IPTF DPWFS H31-16 1 -16 39.7 31.0 4500 124.0 18000 1.73 355 2.31 The combination of high temperature and19.1 high pressure reduce the hose life.140.0 H31-12 20 3/4 -12 25 32.0 25.4could 35.0 5000 20300 280 Part Number

s

%*/ &/ 5ZQF 41

er IJHI UFOTJMF TUFFM XJSF er

weight

mm

Recommended Fluids

H29

min. bend radius

Size

797TC-12 20 3/4 -12 19.1 27.9 42 Replace the hose when any deformation or damage on the hose cover are visible.

The combination could reduce the hose life.

797TC-16 25 1 of high temperature -16 and high pressure25.4 35.7 42 The combination of high temperature and high pressure could reduce the hose life.

ubber nsile steel wire ce hetic rubber

5.4

12

13.1-12. Parker Hydraulic Hoses

No-Skive No-SkiveParkrimp Compact Spiral

moulding, mining

9.1 4SP

Parkrimp No-Skive Hose Mento Hoses and Couplings Catalogue 797TC

High pressure Compact Spiral

H31-16 25 -16 25.4and high 39.7 must be pin-pricked.

The combination of1 high temperature pressure could31.0 reduce the hose4500 life.

Catalogue 4400/UK Da-16 The combination of high temperature and high pressure on could reduce the hose life.

Consult the chemical compatibility section

124.0

18000

355

2.31

Weight kg 0.73 0.91 1.08 1.39 1.73 2.31

t *OUFSMPDL UFDIOPMPHZ t *OUFSMPDL UFDIOPMPHZ t 3FJOGPSDFNFOU PG Mento Hoses and Couplings Catalogue t 3FJOGPSDFNFOU PG four four or or six six high high tensile tensile steel steel wires wires t $POTUBOU XPSLJOH QSFTTVSF PG .1B t $POTUBOU XPSLJOH QSFTTVSF PG .1B

13

13.1-13. Parker Hydraulic Hoses

Primary Primary Applications Applications (FOFSBM IJHI QSFTTVSF IZESBVMJD BQQMJDBUJPOT (FOFSBM IJHI QSFTTVSF IZESBVMJD BQQMJDBUJPOT ParLock Hose 2 Applicable Applicable Specifications Specifications

R35 ParLock Multispiral Exceeds ISO 3862 Type R13 – Parker Specifications &YDFFET *40 5ZQF 3 o 1BSLFS 4QFDJmDBUJPOT &YDFFET *40 5ZQF 3 o 1BSLFS 4QFDJmDBUJPOT

Construction Construction Tube: Synthetic Tube: Synthetic rubber rubber 3FJOGPSDFNFOU 3FJOGPSDFNFOU 'PVS PS TJY TQJSBMT PG IJHI UFOTJMF TUFFM XJSF 'PVS PS TJY TQJSBMT PG IJHI UFOTJMF TUFFM XJSF Cover: Synthetic Cover: Synthetic rubber rubber

5FNQFSBUVSF 3BOHF 5FNQFSBUVSF 3BOHF ............ ¡$ VQ UP ¡$ ............ ¡$ VQ UP ¡$

• Interlock technology High pressure Exception: Exception: Air .................................... NBY ¡$ .................................... NBY ¡$ • Reinforcement of four high Air tensile steel wires Standard 8BUFS ............................... NBY ¡$ • Constant working pressure 8BUFS of 35.5............................... NBY ¡$ MPa Recommended Fluids: Petroleum and water-glycol based fluids, lubricating oils, air and water. For air above 1.7 MPa, the hose cover must be pin-pricked. Consult the chemical compatibility section in t *OUFSMPDL UFDIOPMPHZ cap. 18 for more detailed information.

ParLock Multispiral

R35

ParLock Multispiral t 3FJOGPSDFNFOU PG Exceeds 3862 Type R13 – four or six high tensileISO steel wires Hose I.D. Parker Specifications t $POTUBOU XPSLJOH QSFTTVSF PG .1B

T

FM XJSF

¡$ ¡$ ¡$

3FDPNNFOEFE 'MVJET 3FDPNNFOEFE 'MVJET Primary General high pressure hydraulic applications Petroleum and Petroleum and water-glycol water-glycol based based fluids, fluids, lubricating lubricating oils, oils, Applications: Applicable Exceeds ISO 3862 Type R13 – BJS BOE XBUFS 'PS BJS BCPWF .1B UIF IPTF DPWFS BJS BOE XBUFS 'PS BJS BCPWF .1B UIF IPTF DPWFS Specifications must be must be pin-pricked. pin-pricked. Parker Specifications Construction: Consult section Consult the chemical chemical compatibility compatibility section on on Tube: the Synthetic rubber pages Ab-22 for Reinforcement: or sixdetailed spirals information. of high-tensile steel wire pages Ab-22 to to Ab-30 Ab-30Four for more more detailed information.

Cover: Synthetic rubber ParLock Hose Temperature Range –40°C up to + 125°C 2 Air: max. +70°C Water: max. +85°C Exception: Fitting Series Fitting Series Fitting Series: Internal and external skiving TJ[F

V4 Internal and external skiving TJ[F

External skiving (size -12, -16, -20)

V6

*OUFSOBM BOE FYUFSOBM TLJWJOH TJ[F

*OUFSOBM BOE FYUFSOBM TLJWJOH TJ[F

Internal and external skiving (size -24, -32) Pressure Pressure Rating Rating

Pressure Rating

Part Part Number Number max. max. min.

Hose Hose min.

Hose Hose Hose min. bend bend Min. bend max. dynamic min. min. burst weight weight working burst pressure working pressure pressure I.D. O.D. I.D. O.D. O.D. radius Part radius working pressure burst pressure pressure radius DN Inch Size mm mm MPa psi MPa psi mm kg psi MPa MPa psi psimm Number DN inch DN Size mm mm Inch Size mm mm mm MPa MPa psi kg R35-12 20 R35-12 3/4 -12 19.1 32.00 32.00 35.0 35.0 55 000 5000140.0 140.0 20000 220 20 3/4 -12 19.1 20 220 1.5 R35-12 20 3/4 -12 19.1 32.00 35.0 000 140.0 20 000 000 220 1.5 R35-16 25 R35-16 1 -16 25.4 39.35 35.0 5000 140.0 20000 280 25 11 -16 25.4 39.35 35.0 55 000 140.0 20 280 2.2 R35-16 25 -16 25.4 39.35 35.0 000 140.0 20 000 000 280 2.2 R35-20 32 R35-20 1-1/4 -20 31.8 45.50 35.0 5000 140.0 20000 380 32 31.8 45.50 35.0 55 000 140.0 20 380 2.6 R35-20 32 1-1/4 1-1/4 -20 -20 31.8 45.50 35.0 000 140.0 20 000 000 380 2.6 3FDPNNFOEFE 'MVJET R35-24 40 R35-24 1-1/2 -24 -24 38.1 38.1 57.30 57.30 35.0 35.0 t *OUFSMPDL UFDIOPMPHZ 5000140.0 140.0 20000 480 40 55 000 20 480 4.8 R35-24 40 1-1/2 1-1/2 -24 38.1 57.30 35.0 000 140.0 20 000 000 480 4.8 R35-32 50 2 -32 50.8 71.10 35.0 5000 140.0 20000 600 t 3FJOGPSDFNFOU PG Petroleum and water-glycol oils, 71.10 R35-32 50 2lubricating -32 50.8 35.0 55 000 140.0 20 600 6.7 R35-32 based fluids, 50 2 -32 50.8 71.10 35.0 000 140.0 20 000 000 600 6.7 The combination of high temperature and high pressure could reduce the hose life. four or six high tensile steel wires BJS BOE XBUFS 'PS BJS BCPWF .1B UIF IPTF DPWFS The of temperature The combination combination of high high temperature and and high high pressure pressure could could reduce reduce the the hose hose life. life.

Primary Applications t $POTUBOU XPSLJOH QSFTTVSF PG .1B must be pin-pricked. (FOFSBM IJHI QSFTTVSF IZESBVMJD BQQMJDBUJPOT (FOFSBM IJHI QSFTTVSF IZESBVMJD BQQMJDBUJPOT Hose Consult the chemical compatibility section ParLock on R35TC/RS35TC-48 pages Ab-22 to Ab-30 for more detailed information.

Applicable Specifications

Weight kg 1.5 2.2 2.6 4.8 6.7

R35TC/RS35TC-48 ParLock Multispiral Exceeds ISO 3862 Type R13 – Parker Specifications &YDFFET *40 5ZQF 3 o 1BSLFS 4QFDJmDBUJPOT &YDFFET *40 5ZQF 3 o 1BSLFS 4QFDJmDBUJPOT

3FDPNNFOEFE 'MVJET Primary Applications: General high pressure hydraulic applications Applicable Exceeds ISOfluids, 3862 Type R13 –oils, Petroleum and and water-glycol water-glycol based fluids, lubricating oils, Petroleum based lubricating Specifications: Parker Specifications BJS BOE XBUFS 'PS BJS BCPWF .1B UIF IPTF DPWFS BJS BOE XBUFS 'PS BJS BCPWF .1B UIF IPTF DPWFS Construction: must be pin-pricked. pin-pricked. Synthetic rubber must be Inner Tube: Consult the the chemical chemical compatibility compatibility section on Reinforcement: Four or six spirals ofon high-tensile steel wire Consult section High abrasion resistance MSHA approved Pressure Rating5FNQFSBUVSF 3BOHF ............ ¡$ VQ UP ¡$ ............ ¡$ VQ UP ¡$ Cover: pages Ab-22 Ab-22 to to Ab-30 Ab-30 for more more detailed information. pages for detailed information. • Interlock technology synthetic rubber Catalogue Catalogue 4400/UK 4400/UK Da-25 Exception: Air steel .................................... NBY ¡$ Da-25 Exception: Air .................................... NBY ¡$ • Reinforcement of four high tensile wires Temperature Range –40°C up to + 125°C max. • Constant working pressure of 35.5 MPa 8BUFS ............................... NBY ¡$ min. bend min.

8BUFS ............................... NBY ¡$ Air: max. +70°C Water: max. +85°C Exception: weight working pressure burst pressure radius •t *OUFSMPDL UFDIOPMPHZ Highly abrasion resistant Fitting Series Fitting Series: • MSHA approved t 3FJOGPSDFNFOU PG MPa psi MPa psi mm kg Internal and external skiving (size -12 up to -20) Internal and external skiving TJ[F

V4 Internal and external skiving TJ[F

• Hose is suitable for teporary immersion in mineral oil up to 70°C four or six140.0 high tensile wires 1.5 35.0 5 000 20 000 steel220 with frequent inspections *OUFSOBM BOE FYUFSOBM TLJWJOH TJ[F

*OUFSOBM BOE FYUFSOBM TLJWJOH TJ[F

V6 Internal and external skiving (size -24 up to -4 35.0 5 000 140.0 Petroleum 20 000 280 2.2 Recommended Fluids: and water-glycol based fluids, t $POTUBOU XPSLJOH QSFTTVSF PG .1B lubricating and water. 20 For000 air above380 1.7 MPa,2.6 the hose cover 35.0 5 000 oils, air140.0 Pressure Rating Rating Pressure t )JHIMZ BCSBTJPO SFTJTUBOU must be pin-pricked.

Consult the chemical section cap.

35.0 5 000 140.0 20 000 480 4.8 18 for more detailed information.

35.0 5 000 140.0 20 000 600 6.7 t .4)" BQQSPWFE

Fitting Series

Construction

Tube: Synthetic rubber 3FJOGPSDFNFOU 'PVS PS TJY TQJSBMT PG IJHI UFOTJMF TUFFM XJSF 'PVS PS TJY TQJSBMT PG IJHI UFOTJMF TUFFM XJSF 3FJOGPSDFNFOU *OUFSOBM BOE FYUFSOBM TLJWJOH TJ[F

Cover: Synthetic rubber rubberV6 Cover: Synthetic Synthetic rubberV4 Internal and external Tube: skiving TJ[F

Part Number Number Part

Hose Hose

I.D. t )PTF JT TVJUBCMF GPS UFNQPSBSZ I.D. HoseDN I.D. Inch DN Inch Size Size mm mm JNNFSTJPO JO NJOFSBM PJM VQ UP ¡$ R35-12 20 3/4 -12 19.1 R35-12 20 3/4 -12 19.1 with frequent inspections

hose life.

Hose Hose O.D. O.D. mm mm

32.00 32.00 Hose 39.35 39.35

max. max. working pressure pressure working

MPa MPa 35.0 35.0 35.0 35.0

min. min. burst pressure pressure burst

Rating psiPressureMPa MPa psi

5 000

140.0

min. bend bend min. radius radius

weight weight

psi psi

mm mm

kg kg

20 000

220

1.5

5 000 140.0 20 000 220 1.5 Min. bend max. dynamic min. burst R35-16 25 -16 25.4 000 140.0 20 000 000 280 2.2 R35-16 25 11 -16 25.4 55 000 140.0 20 280 2.2 ns Part O.D. radius Weight working pressure pressure R35-20 32 1-1/4 -20 31.8 45.50 35.0 5 000 140.0 20 000 380 2.6 R35-20 32 1-1/4 -20 31.8 45.50 35.0 5 000 140.0 20 000 380 2.6 MPa psi MPa psi Number DN inch Size mm mm mm kg R35-24 40 1-1/2 -24 38.1 57.30 35.0 5 000 140.0 20 000 480 4.8 R35-24 40 -2419.138.1 57.30 35.0 5 000 000 R35TC-12 19 3/4 -12 1-1/2 32.00 35.0 5000 140.0 140.0 20 20000 480 2204.8 1.5 R35-32 50 2 -32 50.8 71.10 35.0 5 000 140.0 20 000 600 6.7 Recommended Fluids R35-32 50 71.10 35.0 5 000 R35TC-16 25 1 -16 2 -3225.450.8 39.35 35.0 5000 140.0140.0 20 00020000 600 2806.7 2.2 The combination combination of high high temperature temperature and high high pressure pressure could reduce reduce the hose hose life. life. 35.0 Petroleum water-glycol based fluids, R35TC-20 and 31 1 1/4 -20 lubricating 31.8 oils, 45.50 5000 140.0 20000 380 2.6 The of and could the R35TC-24 38 air above 1 1/2 38.1 57.30 35.0 5000 140.0 20000 480 4.8 air and water. For 1.7 MPa, -24 the hose cover wire R35TC-32 51 2 -32 50.8 71.10 35.0 5000 140.0 20000 600 6.7 must be pin-pricked.

R35TC-40 63 2 1/2 -40 63.5 84.50 35.0 5000 140.0 20000 800 9.0 R35TC-48the chemical 76 3 -48 on 76.2 96.00 35.0* 5000* 88.0 12750 900 10.0 Consult compatibility section R35TC-48 76 3 -48 76.2 96.00 21.0** 5000** 88.0 12750 900 10.0 pages to Ab-34 fordeformation more detailed information.

ReplaceAb-26 the hose when any or damage on the hose cover are visible. The combination of high temperature and high pressure could reduce the hose life. * 35 MPa: Static applications according to ISO 6807-D. ** 21 MPa: Dynamic hydraulic application design factor > 4:1 ¡$ Catalogue 4400/UK Da-25 ¡$ Fitting Series ¡$ Internal and external skiving (size -12 up to -20) V4

Internal and external skiving (size -24 up to -48)

V6 Da-25

Hose O.D.

NBY working pressure

min. burst pressure

min. bend radius

weight

mm OD

MPa MPa1

psi psi1

MPa MPa2

psi psi2

mm Bend

kg weight

32.00 39.35 45.50 57.30 71.10 84.50 96.00 96.00

35.0 35.0 35.0 35.0 35.0 35.0 35.0* 21.0**

5000 5000 5000 5000 5000 5000 5000* 3040**

140.0 140.0 140.0 140.0 140.0 140.0 88.0 88.0

20000 20000 20000 20000 20000 20000 12750 12750

220 280 380 480 600 800 900 900

1.5 2.2 2.6 4.8 6.7 9.0 10.0 10.0

ver are visible.

ParLock Hose

Pressure Rating

Catalogue 4400/UK 4400/UK Catalogue