Mento Hoses and Couplings Catalogue
12. Pipe Joints
Pipe Joints • • • • • • •
12.
Victaulic® Zero-Flex Rigid Coupling Style 07 Victaulic® Flexible Coupling Style 75 Victaulic® Flexible Coupling Style 75 Victaulic® Snap-Joint® Coupling Style 78 Victaulic® Fittings — Elbows Straub Pipe Joints Straub-Metal-Grip Ø 33.7 - 609.6 mm Metric Specification
12-1 12-2 12-3 12-4
5. EDITION
0
Mento Hoses and Couplings Catalogue
1
12-1. Pipe Joints Victaulic® Zero-Flex Rigid Coupling ® Style 07 Victaulic Zero-Flex Rigid
Coupling Style 07
06.02
Rev M
R WP The unique angle-pad design Performance data presented in thisOut. document is based Art No. of the Zero-Flex® Style 07 wall, Painted mm pipe. For Bar use with on use with standard carbon steel coupling adjusts to standard 1.940.224 52 17.09 pipe, please reference33.7 publication pipestainless and roll orsteel cut groove 42.4 used52on light tolerances, positively for pressure ratings and 1.940.225 end loads. When 48.3 52 must clamping the pipe tosteel resistpipe,1.940.226 wall stainless the Victaulic RX roll set flexural and torsional loads. 1.940.227 60.3 52 be used to roll groove the pipe. For further information 1.940.228 76.1 52 refer to publication Fast regarding cupling roll grooving stainless 1.940.229 steel, 88.9 52 • Working 17.01.Pressure 52 Bar 1.940.230 114.3 52 • Standard gasket EPDM 1.940.231 139.7 48 For 14 – 24"/350 – 600 1.940.232 mm sizes Victaulic offers 168.3 48 the Advanced Groove System (AGS)219.1 line of products. 1.940.233 41 Request publication 20.02 for information 1.940.234 273.0 on the 34 rigid 1.940.235 323.9 27 W07 AGS coupling.
Exaggerated for clarity
Certifications/Listings
Victaulic® Flexible 104-1a/02 Coupling ® See Victaulic publication 10.01 for details Style 75
Victaulic Flexible Coupling Style 75 06.05 • Victaulic RX roll sets must be used when grooving WARNING
See Victaulic publication 02.06 for portable water approvals if applicable.
Rev O
light-wall/thin-wall stainless forWP use with Fast cupling Out. pipe R Art No. steel • Working Victaulic Pressure 35 Bar Couplings. Painted mm Bar • Standard gasket EPDM WARNING 34 Failure to use Victaulic1.940.300 RX roll sets48.3 when grooving The unique angle-pad design of the Zero-Flex® Style 07 • Victaulic RX roll sets must be used when grooving 1.940.301 60.3 may 34 light-wall/thin wall stainless steel pipe cause coupling adjusts to standard pipe and roll or cut groove light-wall/thin-wall stainless steel pipe76.1 for use with 1.940.302 34 and/or joint failure, resulting in serious personal injury tolerances, positively clamping the pipe to resist flexural Victaulic Couplings. 1.940.303 88.9 34 property damage. and torsional loads. The wider key section fills more of 1.940.304 Failure to use Victaulic RX roll sets when114.3 grooving 34 the groove area. 1.940.305 139.7 31 light-wall/thin-wall stainless steel pipe may cause joint 1.940.298 141.0 31 The Victaulic standard rigid coupling offering is the Style failure, resulting in serious personal injury and/or 1.940.306 168.3 31 Exaggerated for clarity NOTICE 107 installation-ready rigid coupling product line. Please property damage. 1.940.307 219.1 31 reference publication 06.21. For all available sizes, the Approvals/Listings • Victaulic RX grooving rolls must be ordered Product Description
Style 107 is®the standard rigid coupling Victaulic supplies Victaulic Standard Flexible Coupling in North America for ® piping systems using Grade “EHP” Style 77 or “T” gaskets. Contact Victaulic for further details.
Victaulic Flexible Coupling Style 75 See Victaulic publication 10.01 for details
•
separately. They are identified by a silver color and NOTICE the designation RX on the front of the roll sets. 06.04 Victaulic RX grooving rolls must be ordered separately. They are identified by a silver color and
Style 07 couplings areforrated toapprovals 750 psi/5175 kPa, See Victaulic publication 02.06 portableup water if applicable.
Out. Style the 77data couplings are RX No.of designation on document theArt front rollR sets. WP Performance presented in this is the based with cross-ribbed dependent on size, for 1 – 12"/25 – 300 mm piping on usedesigned Bar with standard wall, carbon steelPainted pipe. For usemm construction to provide a systems. Rigid couplings provide rigidity for valve with stainless steel pipe, please reference publication 1.940.261 33.7 69 component for pressure Product Description connections, machinery rooms, fire mains, and long17.09 piping for pressure and end loads. When used 1.940.262 42.4 69 systems.ratings The coupling stainless steel pipe, the Victaulic RX roll48.3 1.940.263 69 straight runs. Support and hanging requirements on light is wall offered in a two piece Style 75 is available where moderate pressures are set must be used to roll groove the pipe. For further 60.3 housing design from 1.940.264 69 correspond to ASME B31.1 Power Piping Code, ASME expected or weight considerations are a factor. Up ¾ – 24"/20 – 600 grooving mm sizesstainless for 1.940.265 information regarding steel pipe, refer 76.1 69 B31.9 Building Services Code and NFPA 13 Sprinkler to 50% lighter in weight than the Style 77, the Style pressures up to to publication 17.01. 1.940.266 88.9 69
Systems. Angle-pad design permits assembly by 1000 psi/6900 kPa. 75 coupling is recommended for service up to 500 1.940.267 114.3 For 14 – 24"/350 – 600 mm flexible roll groove systems, removingkPa onedepending nut/bolt and scissoring housing over psi/3450 on size. Housings are cast in 1.940.268 139.7 Style W77 AGS couplings. For Fastrecommends cupling gasket. This reduces number of −components to Victaulic ¾ identical − 12"/20 − 300 mm sizes 14 − 24"/350 600 mm sizes and two pieces in the all sizes. Hot-dip galvanized 1.940.399 20.03. 141.0 • Working Pressure Bar more information, request 69 submittal publication handle during assembly, speeds and eases installation. special coatings are available for all sizes. 1.940.269 168.3 • Standard gasket EPDM Approvals/Listings 1.940.270 219.1 The Victaulic standard flexible coupling offering for grade 1.940.271 273.0 WARNING “EHP” or “T” gaskets is the Style 177 installation-ready 1.940.272 323.9 sizes, the Style 177 is • flexible coupling.104-1a/04 For all available Victaulic RX roll sets must be used when grooving Job/Owner Engineer See publication 10.01 for details theVictaulic standard flexible coupling Victaulic supplies in North light-wall/thin-wall stainless steel pipe for use with ® VictaulicSpec See Victaulic No. publication 02.06 for® potable water approvals if applicable. System Section Couplings. America for piping systems using Grade “EHP” or “T” Failure to use Victaulic RX roll sets when grooving gaskets. LocationContact Victaulic for further details. Paragraph
06.09
69 69 69 69 55 55 55
Victaulic Snap-Joint Coupling Style 78
light-wall/thin-wall stainless steel pipe may cause joint Product Description Performance data presented in this document is based failure, Style 78 Snap-Joint couplings resulting in serious personal injury and/or Out. R Art No. Approved Contractor are designed on use with standard wall, carbon steel pipe. For use with property damage. for quick discon- Painted mm Style 77 couplings are designed with cross-ribbed nect service. stainless steel Submitted By pipe, please reference publication 17.09 Date Mated housings 1.940.420 60.3 construction to provide a component for pressure piping are hinged with an attached for pressure ratings and end loads. When used on light 88.9 systems. locking handle for assembly. 1.940.424 Date The coupling is offered in a two piece housing wall stainless pipe, the mm Victaulic RXpressures roll set must NOTICE 1.940.425 114.3 Housings through 4"/100 mm design from ¾ steel – 24"/20 – 600 sizes for up size haveRXa grooving smooth outer 141.3 be1000 usedpsi/6900 to roll groove to kPa. the pipe. For further information • Victaulic rolls must be1.940.422 ordered victaulic.com | Couplings | Rigid | Style 07 | Publication 06.02 surface. Larger sizes have by a1.940.955 168.3 regarding roll grooving stainless steel, refer to publication separately. They are identified silver color and All sizes1482 are Rev provided with plated cross-ribbed design for added 06.02 M Updated 07/2014bolts © and 2014 nuts. Victaulic Company. All rights reserved. 17.01. the designation RX on the front of the roll sets. Galvanized and stainless steel housings are also strength. available. Independent testing has shown the Style 77 coupling to be an effective stress relief and vibration attenuation Job/Owner device providing performance superior to braided steel and elastomeric arch-type connectors when used in System No.
1
• Working Pressure 20 Bar
Engineer Spec Section
1.940.320
219.1
WP Bar 50 80 100 125 150 200
AGS VBSP
AGS AGS VBSP VBSP
AGS
AGS VBSP
VBSP
AGS VBSP
Hole Cut
Hole Cut
Hole Cut Hole Cut
Hole Cut
for for fast for fast for installation fast installation for fast installation fast installation forinstallation fast installation
|– 20 |from 20 ––|600 20 –| 20 600 –mm |– 20 600 –24" mm 600 –mm 600 | 20 mmmm – 600 mm • • Fittings • Fittings • Fittings •Fittings available Fittings available • available available Fittings from available from ¾ from available from –¾24" –from ¾24" ¾ 24" –¾ 24" 24" ¾
• • For • For •coating For •coating For coating For coating options, • coating options, For options, options, coating download options, download download download options, product download product product download product submittal product submittal submittal submittal product submittal subm
Aquamine® PVC
Hole Cut
®
HDPE
Expansion Joints Plain End
Plain End
Plain End Plain End
Stainless Steel
Stainless Steel Stainless Steel Stainless Steel Stainless Steel Stainless Steel
Elbows Elbows Elbows Elbows ElbowsElbows FRP
No. 32-R Reducing Tee Wye
Plain End
Plain End
Expansion Joints Expansion Joints Expansion Joints Expansion Joints Expansion Joints
350 |60" 350 350 1500 |14 –350 1500 |––350 1500 mm, – 1500 mm, –| 1500 350 mm, mm, –mm, 1500 mm, • • For •ofFor •AGS For •AGS For sizes AGS For AGS sizes •coupling AGS 14 sizes sizes For 14 – 60" sizes 14 –AGS 60" 14 –| 60" –14 sizes –|–60" 60" • Standard fitting pressure ratings conform to ratings installed download download download download submittal download submittal submittal download submittal 20.05 submittal 20.05 20.05 submittal for 20.05 for complete 20.05 for complete for complete 20.05 for complete information complete information forinformation complete information informati info •Approvals/Listings: All fittings supplied with grooves or shoulders for fast installation Approvals/Listings: Approvals/Listings: Approvals/Listings: Approvals/Listings: Approvals/Listings: • Fittings available from ¾ – 24" | 20 – 600 mm • For coating options, please contact Mento Grooved PVC
Copper
Copper
Copper Copper
Copper
Copper
AWWA
AWWA AWWA
AWWA
AWWA
Hydronic Balancing
Design Data
Hydronic Balancing Hydronic Balancing Hydronic Balancing Hydronic Balancing Hydronic Balancing
No.No. 100-6D 100-6D No. 100-5D 100-5D No. 100-6D No. No. 100-3D 100-3D No. 100-5D No. 100-6D No. No. 100-1½D 100-1½D No. 100-3D No. 100-5D No. 100-6D No.No. 10No. 10 No. 10 No. 10 10No. 10 No.No. 100 No. 100 No. 100 No. 100100 No. 100 No.No. 100-1½D No. 100-1½D 100-1½D No. 100-1½D No.No. 100-3D 100-3D No. 100-3D No.No. 100-5D No. 100-5D No. 100 90º 690º D690º Long D690º Long D590º Long D Long D Long D 3D Long 5D 6D 90º 1½ D Long 90º D 90º Long 3Long D Long 5Long D Long 6Long D Long 90º90º Elbow 90º Elbow 90º Elbow 90º Elbow Elbow 90º 90º Elbow 90º Long 90º Long 90º Long 90º Long Long 90º 90º Long 90º 1½ 90º 1½ D 1½ Long D Long D1½ Long 90º 1½90º D390º D Long 390º Long D390º Long 90º 90º 3 D90º Long 590º D590º Long 90º 5 D90º Long 90º 6D Radius Radius Elbow Elbow Radius Radius Elbow Elbow Radius Elbow Radius Radius Elbow Elbow Radius Elbow Radius Elbow Radius Elbow Radius Elbow Radius Elbow Radius Elbow Radius Elbow Radius Radius Radius Radius Elbow Elbow Radius Elbow Elbow Radius Elbow Radius Radius Elbow Radius Elbow Elbow Elbow Radius Radius Radius Elbow Elbow Elbow Radius Radius Elbow Elbow Radius Elbow Radius Gaskets/ Seals/O-Rings
Fittings — Elbows
AWWA
Tools Index
ase ows e×
2 to ratings to ratings to to ratings of ratings to installed of ratings installed oftoof installed ratings installed ofcoupling installed coupling of coupling installed coupling coupling coupling 12-2. Pipe Joints • • All• All fittings • All fittings •All fittings All supplied fittings •supplied fittings supplied Allsupplied fittings with supplied with grooves with supplied with grooves grooves with grooves or grooves shoulders or with shoulders oror grooves shoulders shoulders or shoulders or shoulder
Hydronic Balancing
D ong w
Mento Couplings Catalogue • •Hoses Standard • Standard • Standard •and Standard fitting Standard •fitting fitting pressure Standard fitting pressure fitting pressure pressure ratings fitting pressure ratings ratings pressure conform ratings conform ratings conform conform ratings conform conform
Victaulic Fittings — Elbows
ee
HDPE
HDPE
HDPE HDPE
HDPE
HDPE
10 Download submittal 07.01 for complete information G-103 REV P No. No. 110 No. No. 110-1½D 110-1½D No. 110-1½D No. 110-3D No. 110-3D No. 110-5D No. 110-5D No. 110-6D No. 110 No. No. 110-3D 110-3D No. 110-5D No. 110-6D No.No. 11No. 11 No. 11 No. 11 11No. 11 No.No. 110 No. 110 No. 110 110110 No.No. 110-1½D No. 110-1½D 110-1½D No.No. 110-3D 110-3D No.No. 110-5D No. 110-5D 110-5D No. 110-6D No.No. 110-6D 110-6D on original grooved end fittings for carbon steel pipe 45º Long 45º 45º Long 45º 45º D Long 1½45º D3 45º Long 3Long D 45º Long 3 D45º Long 5Long D 45º Long 5 D45º Long 6Long D 45º Long 6D 45º 1½ D Long D 3D Long 5D 6D 45º 5 45º D545º Long 45º45º Elbow 45º Elbow 45º Elbow 45º Elbow Elbow 45º 45º Elbow 45º Long 45º Long 45º Long Long 45º 1½ 45º 1½ D 1½ Long D Long D1½ Long 45º D 345º Long D345º Long D545º Long D Long D Long 45º 6 45º D645º Long D645º Long
Radius Radius Elbow Elbow Radius Radius Elbow Elbow Radius Radius Elbow Elbow Radius Radius Elbow Elbow Radius Radius Elbow Radius Radius Elbow Elbow Radius Elbow Radius Elbow Radius Elbow Radius Elbow Radius Radius Radius Radius Elbow Elbow Elbow Elbow Radius Radius Radius Elbow Elbow Elbow Radius Radius Elbow Elbow Radius Radius Elbow Elbow Radius Elbow Radius Radius Elbow Elbow
•
All fittings supplied with grooves or shoulders for fast installation
•
Fittings available from ¾ – 24" | 20 – 600 mm
•
For coating options, download productNo. submittal No. 19 19 19No. 19 No. 12No. 12 No. 12 No. 12 12No. 12 No.No. 13No. 13 No. 13 No. 13 13No. 13 No.No. 18No. 18 No. 18 No. 18 18No. 18 No.No. 19No. 19 No. Download submittal 07.01 for complete informa 45º 45º Adapter Adapter 22½º 22½º 22½º Elbow 22½º Elbow 22½º Elbow Elbow Elbow 22½º 11¼º Elbow 11¼º 11¼º Elbow 11¼º Elbow 11¼º Elbow Elbow Elbow 11¼º 90º Elbow 90º Adapter 90º Adapter 90º Adapter 90º Adapter Adapter 90º 45º Adapter 45º Adapter Adapter 45º Adapter 45º Adapter For AGS sizes 14 – 60" | 350 – 1500 mm, on original grooved end fittings for carbon steel Elbows Elbows Elbows Elbows Elbows Elbows ElbowsElbows Elbows Elbows ElbowsElbows download submittal 20.05 for complete information • Standard fitting pressure ratings conform to ratings of installed coupling
No. 110-5D 45º 5 D Long Radius Elbow
Aquamine PVC Grooved PVC FRP Tools Gaskets/ Seals/O-Rings
Tools
Tools Tools
All fittings supplied with grooves or shoulde for fast installation
Fittings available from ¾ – 24" | 20 – 600 m All fittings are available with optional All fittings are available with optional All All fittings fittings All are are fittings available All available fittings are with available with are optional available optional with option with • galvanized For coating options, download product sub galvanized coating. galvanized coating. galvanized galvanized coating. coating. galvanized coating. coating. • For AGS sizes 14 – 60" | 350 – 1500 mm, download submittal 20.05 for complete in
Index
Index
No.No. 10-DR No. 10-DR No. 10-DR No. 10-DR 10-DR No. 10-DR No.No. R-10F No. R-10F R-10F No. No. R-10F R-10F No. R-10F No.No. R-10G No. R-10G No. R-10G R-10G No. R-10G No. R-10G Drain Drain Drain Elbow Drain Elbow Drain Elbow Elbow Drain Elbow Elbow Reducing Reducing Reducing Base Base Base Reducing Base Base Reducing Base Reducing Reducing Reducing Reducing Reducing Base Base Base Base Reducing Base Reducing Base Support Support Support Elbows Elbows Elbows Support ElbowsElbows Support Elbows Support Approvals/Listings: Support Support Support Support Elbows Elbows Elbows Elbows Support Elbows Support Elbows (OGS Groove Groove Groove × × × ×Groove Groove × (OGS × (OGS Groove (OGS (OGS (OGS Groove (OGS Groove Groove Groove × × ×(OGS ×Groove (OGS ×(OGS (OGS Groove × (OGS Flange) Flange) Flange) Flange) Flange) OGS OGS Groove) OGS OGS Groove) Groove) Groove) OGS Groove) OGSFlange) Groove) No. 100-6D 90º 6 D Long Radius Elbow Tees, Crosses, Wyes, and Laterals 9 9 99 9 9 Index Index
Index
Tools
•
Design Data
FRP
FRP FRP
FRP
Grooved PVC Grooved PVC Grooved PVC Grooved PVC Grooved PVC
•
Tools
No. 110-3D 45º 3 D Long Radius Elbow
No. 100-5D 90º 5 D Long Radius Elbow
Fittings — Tees, Crosses, Wyes and Laterals
Gaskets/ Seals/O-Rings Gaskets/ Seals/O-Rings Gaskets/ Seals /O-Rings Gaskets / Seals/O-Rings Gaskets/ Seals/O-Rings
No. 100-3D 90º 3 D Long Radius Elbow
Original Groove System (OGS)
Design Data Design Data Design Data Design Data Design Data
FRP
•
®
Standard fitting pressure ratings conform to ratings of installed coupling
Aquamine® PVC Aquamine® PVC Aquamine® PVC ® Aquamine PVC Aquamine® PVC
•
Index
D ong w
Download Download Download Download submittal Download submittal submittal Download submittal 07.01 submittal 07.01 07.01 for submittal 07.01 for complete 07.01 for complete for complete 07.01 for complete information complete information forinformation complete information information informat on on original on original on original on original grooved original grooved on grooved grooved end original grooved end fittings end fittings end grooved fittings end fittings for for fittings carbon end for carbon for carbon fittings for steel carbon steel carbon pipe steel forsteel pipe carbon steel pipe pipe pipe steel p
AWWA
Threaded Branch
No. 110-6D 45º 6 D Long Radius Elbow
No. 19 45º Adapter Elbows
All fittings are available with optional galvanized coating.
No. 20 Tee
No. 35 Cross
No. 33 True Wye
No. 25 Grooved Branch Reducing Tee
No. 29T Threaded Branch Reducing Tee
No. 21 Bullhead Tee
No. 30 45º Lateral
No. 30-R 45º Reducing Lateral
No. 32 Tee Wye
G-103 G-103 REV G-103 G-103 REV P G-103 REV P REV P RE PG
No. 29M Tee with Threaded Branch
No. 32-R Reducing Tee Wye
Mento Hoses and Couplings Catalogue
12-3. Pipe Joints
Straub Pipe Joints
Straub Grip-L
Straub Metal Grip
Axial restraint coupling for all metal pipes - Working pressure up to 46 bar - Outside diameters 26,9 to 609,6 mm - Temperature range -20°C to +80°C - 100% Stainless Steel Construction
Axial restraint coupling for all metal pipes - Working pressure up to 62 bar - Outside diameters 33,7 to 609,6 mm - Temperature range -30°C to +100°C
Main range of applications (see key) 1), 3), 4), 5), 7), 8), 12), 14), 15), 16), 18), 19), 20), 21), 22), 24), 25), 26), 28), 29)
Main range of applications (see key) 2), 3), 5), 6), 8), 9), 11), 12), 13), 14), 15), 16), 17), 18), 19), 20), 22), 24), 25)
Straub Flex
Straub Rep
Pipe joint without axial restraint for all pipe materials – Working pressure up to 25 bar – Outside diameters 48,3 to 2032,0 mm – Temperature range –20°C to +80°C
Repair clamp without axial restraint for all pipe materials – Working pressure up to 16 bar – Outside diameters 48,3 to 1219,2 mm – Temperature range –20°C to +80°C
Main range of applications 1), 4), 5), 7), 10), 12), 14), 15), 18), 21), 22), 23), 24), 26), 27), 28), 29) (see key)
Main range of applications 1), 4), 5), 7), 8), 9), 10), 12), 14), 15), 18), 21), 22), 23), 24), 26), 27), 28), 29)
Key to main range of applications Surface / underground engineering 1) 2) 3) 4)
Sanitary lines Fuel lines Fire-fighting lines Ventilation lines
Water and gas supply 5) Water lines 6) Gas lines 7) Wells 8) Hydrant lines 9) Tank lines
Power generation 10) Penstock lines 11) Turbine lines 12) Cooling lines 13) Utility lines Machinery and construction 14) Cooling lines 15) Utility lines 16) Lubrication lines 17) Fuel lines
Shipbuilding / Offshore 18) Ballast lines 19) Fuel lines 20) Fire-fighting lines 21) Vent systems 22) Sea water cooling systems Mining /Tunnelling 23) Drain lines 24) Suction lines 25) Compressed air lines
Sewage 26) Sludge lines 27) Drainage lines 28) Chemical lines 29) Airation lines
3
Mento Hoses and Couplings Catalogue
12-4. Pipe Joints
Straub-Metal-Grip Ø 33.7 - 609.6 mm Metric Specification Sealing sleeve EPDM/E Temp: -30°C up to +100°C EPDM Medium: all qualities of water, waste water, air, solids and chemical products ( chemical resistance on request) Sealing sleeve NBR/N Temp: -20°C to +80°C Medium: water, gas, oil, fuel and other hydrocarbons Versions in W2 or W4.
Pipe AD mm 33.7 38.0 42.4 44.5 48.3 54.0 57.0 60.3 76.1 84.0 88.9 104.0 108.0 114.3 129.0 133.0 139.7 154.0 159.0 168.3 219.1 244.5 267.0 273.0 323.9 355.6 406.4 457.2 508.0 558.8 609.6
Clamping Range mm 33.2 34.2 37.5 38.5 41.9 42.9 44.0 45.0 47.8 48.8 53.5 54.5 56.4 57.6 59.7 60.9 75.3 76.9 83.2 84.8 88.0 89.8 103.0 105.0 106.9 109.1 113.2 115.4 127.7 130.3 131.7 134.3 138.3 141.1 152.5 155.5 157.4 160.6 166.6 170.0 216.9 221.3 242.0 247.0 264.5 269.5 270.5 275.5 320.5 327.0 352.0 359.0 402.5 410.5 452.5 462.0 503.0 513.0 554.0 564.0 604.5 614.5
Nom pr. PN 16 16 16 16 16 16 16 16 16 16 16 16 16 16 16 16 16 16 16 16 16 14 12 12 10 8 8 6 5 4.5 4
Work. pr. PBmin bar 62 58 53 48 44 39 37 37 56 45 41 37 35 34 33 33 32 32 31 29 26 27 24 21 18 17 14 8 6 6 5
Dimensional data B mm 46/67 61 61 61 61 77 77 77 94 94 94 94 94 94 108 108 109 109 109 109 150 148 148 148 148 148 148 148 148 148 148
C mm 18 19 20 20 20 38 32 32 39 39 39 39 39 39 51 43 43 51 43 43 60 67 67 67 67 67 67 67 67 67 67
DV mm 52 58 62 64 68 74 77 82 100 112 117 133 133 139 160 160 168 186 187 200 259 290 312 318 369 401 451 502 553 604 655
KV mm 75 90 90 95 95 100 105 110 130 140 145 160 160 165 190 190 200 215 215 230 295 345 365 370 420 450 500 550 600 650 700
Distance between pipe ends Rmax without with strip insert mm 5 15 5 15 5 15 5 15 5 15 5 15 10 25 10 25 10 25 10 25 10 25 10 25 10 25 10 25 15 35 15 30 15 30 15 35 15 30 15 30 15 35 15 35 15 35 15 35 15 35 15 35 15 35 15 35 15 35 15 35 15 35
Locking bolts torque socket thread rate head M... Nm mm 10 6 8 15 6 8 15 6 8 15 6 8 15 6 8 20 6 8 20 6 8 20 6 8 35 8 10 35 8 10 35 8 10 35 8 10 35 8 10 35 8 10 60 10 12 60 10 12 60 10 12 60 10 12 60 10 12 60 10 12 100 14 16 180 17 20 180 17 20 180 17 20 230 17 20 230 17 20 230 17 20 250 17 20 250 17 20 300 17 20 300 17 20
Legend: – W1 - W5 according to DIN Standard 86128 (ASTM F1476 / F1548, ISO/NP-15837 / 15838). – PB : Operating pressure considering the applications loads. Contact factory for higher operating pressure. – PNm~Nominal pressure, includes four times safety factor, for applications that require authonsation of classification societies (e.g. shipbuilding). * Property class 12.9, Dacromet 500 (zinc-chromate with integrated lubricant). Remarks: – Follow fitting / disassembly instructions. – The pressure values are valid on radial rigid carbon steel pipes under static loads (contact factory for minimum wall-thickness of the pipe). – Weight of the pipe joints see packing specifications. – Strip insert is required when gap between pipe ends is excessive, in presence of swelling, vacuum/depression (suction line), or external pressure. Strip inserts are available, under separate order, at additional cost. Ordering information: 122 ( +E (EPDM) or N (NBR) + dim.
4