Mento Hoses and Couplings Catalogue
14.8. Test Nipples, Hoses and Gauges
Test Nipples, Hoses and Gauges
14.8
• Visual index Parker SensoControl Parker SensoControl Test Points • EMA1/EMA3-Test Point fitting • EMA3 MAV…MA3 • MAVMD…MA3 SMA3 Parker SensoControl Diagnostic Products • SensoControl Serviceman • SensoControl ServiceJunior • SensoControl The Parker Service Master Plus • Back Flange for Lower connection • Front Flange for Lower connection • "U" - Clamp for back connection • DN 63 Mod 10 • DN 100 Mod 10 • DN 63 Mod 18 • DN 100 Mod 18
14.8-1 14.8-2 14.8-3 14.8-4
14.8-5
14.8-6 14.8-7 14.8-8 14.8-9
5. EDITION
Mento Hoses and Couplings Catalogue
14.8-1. Test Nipples, Hoses and Gauges
Parker SensoControl Visual index Parker SensoControl ®
Visual index Series 1 Test point fitting with pin-lock
EMA1 p. Q4
GMA1 p. Q5
VKA1 p. Q6
MAV … MA1 p. Q7
SMA1 p. Q7
EMA3 p. Q8
GMA3 p. Q9
VKA3 p. Q10
MAV … MA3 p. Q11
MAVMD … MA3 p. Q11
SMA3 p. Q11
Series 3 Test point with threaded connection M 16×2
SensoControl® Product range Diagnostic/Industrial p. Q12
Q2
On the following pages please find the most common available types. For other types of test nipples, hoses and gauges, see in the visual index or contact Mento
Catalogue 4100-9/UK
1
Mento Hoses and Couplings Catalogue
14.8-2. Test Nipples, Hoses and Gauges
Parker SensoControl Test Points Parker SensoControl
® Test
2
Points
EMA1/EMA3-Test Point fitting EMA1/EMA3-Test Point fitting Differences between EMA1 and EMA3 types a) sealing system (see previous section) b) Test hose connection by plug-in coupling in EMA1 Test hose connection by threaded connection in EMA3 c) Working pressures (see section advantages)
● For pressure monitoring and checking on high, low and negative pressure systems. ● For bleeding cylinders and hydraulic systems. ● For taking samples on high, low and negative pressure systems. Advantages: ● Leakfree connection before valve is open ● Sturdy, safe constructions for small dimensions ● Easy handling ● Simple connection of measuring, control and switching devices ● Coupling under pressure up to 400 bar is possible with screw couplings ● Nominal pressures up to 630 bar ● Self locking metal guard cap, vibration resistant
Working pressure ● EMA3 types up to 630 bar ● EMA1 types up to 400 bar ● Max. working pressure 630 bar for GMA, VKA and EMA … the recommended working pressure of fitting manufacturer has to be applied ● Joining under pressure up to 400 bar max. ● The allowable nominal pressures of each Test-Point are shown on the product pages.
Sealing system of the primary seal: EMA1 by ball non-return valve. EMA3 by cone seal with O-ring. The new EMA3 sealing system guarantees minimum leakage rates.
Materials and Temperatures: ● Steel, zinc plated, Cr(VI)-free ● Stainless Steel, material 1.4571 ● Seals: ● FKM (Temperature range –20 to +200°C) ● EPDM Ethylene Propylene (for Break Fluid) (Temperature range –40 to +150°C) ● Hose: Polyamide (Temperature range: –35°C … 100°C max.) ● Stainless Steel FKM only
The screw-on Cap (EMA3), and pin lock (EMA1) types both employ an O-ring seal as secondary sealing with the hose attached.
EMA1
Media: ● Suitable for hydraulic oils and other mineral oil based fluids (Please pay attention to the sealing materials used!) ● For use in conjunction with other liquid media please consult Parker Approvals DVGW for EMA3/8X1OR, EMA3/10X1OR, EMA31/8NPT, EMA31/4NPT
EMA3
Q
Perbunan = registered trademark of Bayer
Q3
Catalogue 4100-9/UK
Mento Hoses and Couplings Catalogue
14.8-3. Test Nipples, Hoses and Gauges
Parker SensoControl Test Points Parker SensoControl Test Points ®
EMA3 Test Point with threaded connection M 16×2 EMA3 Test Point with threaded connection M 16×2 Male thread:
Series 3Series 3
BSP, metric
Port end type A Fig. A
Fig. B
Fig. C
X1) O-ring X2) Eolastic sealing X3) Cutting face
ISO 6149 Fig. F
T1
Fig.
T1 08×1.0 MM08×1.0 10×1.0 MM10×1.0
M 14×1.5 MM14×1.5 10×1.0 12×1.5 MM10×1.0 M 14×1.5 MM12×1.5 16×1.5 MG14×1.5 1/8 1/4 MG16×1.5 G 3/8 GG1/81/2 GG1/41/8 GG3/81/4 G 3/8 GM 1/210×1.0 GM 1/812×1.5 M 14×1.5 G 1/4 G 1/2
G 3/8
D1
L1
9.5 11.5 18.8 14.0 17.0 19.0 21.0 14.0 18.0 22.0 26.0 14.0 19.0 22.0 14.0 17.0 19.0 27.0
38.5 37.0 39.5 40.0 38.0 39.0 40.0 37.5 39.0 40.5 46.0 37.5 39.0 40.5 40.0 38.0 39.0 46.0
**DF = Design Factor
M 10×1.0
1) Pressure
M 12×1.5 G 1/2
DF = Design Factor
**
S1
S2
1)
Fig.
25066
EMA3/10X1ED
400
B
EMA3/12X1.5ED Material
630
B
EMA3/14X1.5ED
400
A F D D D D D D D E B B B B
7.5 7.5 11.0 8.0 12.0 12.0 12.0 8.0 12.0 12.0 14.0 8.0 12.0 12.0 8.0 12.0 12.0 14.0
Fig. E
Weight PN (bar) g/1 CFpiece
A 17 A EMA3/10X1OR 19 F EMA3/14X1.5ISO 17 D 17 D EMA3/10X1 19 D EMA3/12X1.5 22 D EMA3/14X1.5 17 D 19 D EMA3/16X1.5 22 D EMA3/1/8 27 17 E 17 B EMA3/1/4 19 B EMA3/3/8 22 B EMA3/1/2 17 B 17 B EMA3/1/8ED 19 B EMA3/1/4ED 27 17 C
shown = item deliverable
PN (bar) M 14×1.5= PN (MPa) 10
Order code* L2
A
Fig. D
17 EMA3/8X1OR
79 63067 40074 78 40090 40070 40077 91 400 137 40072 40076 93 40071 40072 77 630 135
EMA3/3/8ED
630
Order 71 code*
630
*Please addEMA3/1/2ED the suffixes 400 Cr(VI)-free Steel, zinc plated, below according to the material/ 1) Pressure shownsurface = itemrequired. deliverable Stainless Steel
250 4.0 630 4.0 630 4.0 400 400 4.0 400 4.0 400 4.0 400 400 4.0 400 4.0 400 400 4.0 630 4.0 630 3.4 400 630 4.0 400 4.0 400
4.0 4.0 4.0 4.0 4.0 4.0 4.0 4.0 4.0 4.0 3.4 4.0 4.0 4.0 4.0 4.0 4.0 4.0
Example Suffix630 surface 400 and material CF 71
400
630 630
400 630 630 400 630 400 400
4.0
400 Order code suffixes
C
CF
**
EMA3/8X1OR EMA3/10X1OR 630 EMA3/14X1.5ISO 630 EMA3/10X1 EMA3/12X1.5 EMA3/14X1.5 EMA3/16X1.5 EMA3/1/8 EMA3/1/4 EMA3/3/8 EMA3/1/2 EMA3/1/8ED EMA3/1/4ED EMA3/3/8ED EMA3/10X1ED EMA3/12X1.5ED 400 EMA3/14X1.5ED 630 EMA3/1/2ED
63070
PN (bar)1) DF CFCF 71
DF**
4.0
71 71 4 4 4
4 4 4
4
4 4 4 4 4 4 4
4
4.0 4.0
4.0 EMA3/10X10ORCF EMA3/10X10OR71
Standard sealing 4 material (no additonal. suffix needed)4 NBR VIT
4
Order code suffixes Material
Suffix surface and material
Example
Steel, zinc plated, Cr(VI)-free
CF
EMA3/10X10ORCF
NBR
Stainless Steel
71
EMA3/10X10OR71
VIT
Q8
Please add the suffixes below according to the material/ surface required.
*
Standard sealing
material (no Catalogue 4100-9/UK additonal. suffix needed)
3
Mento Hoses and Couplings Catalogue
14.8-4. Test Nipples, Hoses and Gauges
Parker SensoControl Test Points
Parker SensoControl® Test Points
MAV…MA3
Test point pressure gauge connector with threaded connection M 16×2
MAV…MA3 Test point point pressure connector with threaded MAVMD…MA3 Test withgauge threaded connection M 16×2 connection M 16×2 MAVMD…MA3 Test point with threaded connection M 16×2 SMA3 Test point high pressure hosethreaded with threaded connection 3 SMA3 Test point high pressure hose with connection M 16×2 M 16×2 Series Series 3 Female thread: BSP Sealing: sealing ring DIN 16258*
Test hose: SMA3
Pressure gauge connector: MAV…MA3
T1
T1
G 1/4 G 1/2G 1/4 G 1/4G 1/2 G 1/2
G 1/4 G 1/2
1) Pressure
L1 L2 max. L2 max. S1
L1
54.0 54.0 64.0 41.0 64.0 51.5 41.0 200.0 300.0 51.5 400.0 200.0 630.0 300.0 800.0 1000.0 400.0 1500.0 630.0 2000.0 800.0 2500.0 3200.0 1000.0 4000.0
**DF = Design Factor
12 12 12
12
19 27 19 27
Weight S2 piece g/1
S1 S2 19
19 19
27
19 19
19 27
1500.0
74 129 61 103 73 74 74 79 83 87 95 105 110 125 137
3200.0 4000.0
95
DF = Design Factor
1)
Pressure shown = item deliverable
* Sealing rings according to DIN 16258 for steel design of copper, for stainless* steel design of stainless steel.
Please add the suffixes below Note hoses with small diameter: according to the material/ – Min. bending radius r = 20 mm required. surface
Material
Steel, zinc plated, Cr(VI)-free
1) PN (bar)DF** CF 4.0
630
630 630 630 630 630 630 630 630 630
SMA3-1500
630
suffixes 105Order code SMA3-2000
630
Example Suffix 110 SMA3-2500 surface and 125material SMA3-3200
Material *Please add the suffixes below according to the material/ surface required.
PN (bar)1)
Weight g/1 code*Order code*CF Order piece MAV1/4MA3 630
74 MAV1/4MA3 630 MAV1/2MA3 MAVMD1/4MA3 129 MAV1/2MA3 630 MAVMD1/2MA3 630 61 MAVMD1/4MA3 SMA3-200 630 SMA3-300 630 103 MAVMD1/2MA3 SMA3-400 73 SMA3-200 630 SMA3-630 630 74 SMA3-300 630 SMA3-800 SMA3-1000 74 SMA3-400 630 SMA3-1500 630 79 SMA3-630 SMA3-2000 630 83 SMA3-800 630 SMA3-2500 SMA3-3200 87 SMA3-1000 630 SMA3-4000 630
2000.0
shown = item deliverable 2500.0
PN (bar) = PN (MPa) 10 **
Gauge-Direct-Connector: MAVMD…MA3
137
CF
SMA3-4000
MAV1/4MA3CF
4.0 4.0 4.0 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5
DF** 4.0 4.0 4.0 4.0 4.0 2.5 2.5 2.5 2.5 2.5 2.5 2.5
Standard sealing 630 2.5 material (no additonal. suffi 630x needed) 2.5
630
2.5
NBR
Q
For measuring with liquid pressure media please note: Order code suffixes Bleed before connecting tube! By capillary action discharge of the pressure surface and material Example Standard sealing material medium is Suffix prevented widely.
(no additonal. suffix needed)
Temperature factor of pressure rating: MAV1/4MA3CF NBR 122 % – Hoses are to be protected from fire, from sharp-corners and hot for 30 °C 110 % * Sealing rings according to DIN 16258 for steel design of copper, For with liquid pressure media please note: objects. for 50 °C 100measuring % for stainless steel design of stainless steel. Bleed for 80 °C 86 % before connecting tube! By capillary action discharge of the pressure medium is prevented widely. for 100 °C 77 %
Steel, plated, CF – Working temperature –20 °C up to 100 °C (short timezinc to +120 °C) Cr(VI)-free up to 0 °C
Note hoses with small diameter: – Min. bending radius r = 20 mm – Working temperature –20 °C up to 100 °C (short time to +120 °C) Q11 – Hoses are to be protected from fi re, from sharp-corners and hot objects
Temperature factor of pressure rating: up to
0 °C
for
30°C
122% Catalogue 4100-9/UK 110%
for
50°C
100%
for
80°C
86%
for
100°C
77%
4
® Diagnostic Products Parker Mento SensoControl Hoses and Couplings Catalogue
14.8-5. Test Nipples, Hoses and Gauges SensoControl®
Parker SensoControl Diagnostic Products
Serviceman
The Serviceman has 2 inputs for sensors. This enables a differential pressure measurement by pressing has only one key. Fast comparisons of actual and set The Serviceman 2 inputs for sensors. This enables differential measurement by pressing only one key. valuesaare done pressure very easily.
SensoControl Serviceman
Fast comparisons of actual and set values are done very easily. • • • •
● Easily operation
Easily operation ● Prevention of measuring errors due to automatic Prevention of measuring errors due to automatic sensor recognition sensor recognition Two-line display ● Two-line display in 2 msec. Pressure peak measuring
● Pressure peak measuring in 2 msec.
Serviceman Kit • • •
Parker SensoControl® Diagnostic Products
Serviceman Kit
Delivery in storage-case Incl. test point-adapters and test hoses ● Delivery in storage-case Attachments and sensors to measureand pressure/temperature, flow ● Incl. test point-adapters test hoses
● Attachments and sensors to measure pressure/ temperature, flow
SensoControl®
Catalogue 4054/UK
SensoControl ServiceJunior
The ServiceJunior makes possible the measurement and display of pressures with one instrument. Measured values are shown with high precision on a 4-digit The ServiceJunior possible display.makes Pressure peaksthe aremeasurement securely captured at a scanning rate of 10 ms.
ServiceJunior
and display of pressures with one instrument. Measured values are shown with high precision on a 4-digit display. • Digital pressure measurement and display Pressure peaks are securely captured at a scanning rate of 10 ms. • Back-lit measured value display
•
SensoControl® The Parker Service Master “Easy” Parker SensoControl® Diagnostic Products
SensoControl®
Accuracy ± 0,5% FS
Digital pressure measurement and display • Pressure peaks captured by displaying MIN/MAX reading Back-lit measured value display • Graphic display with bar graph (trailing indicator), peak & hold function Accuracy ± 0,5% FS Pressure peaks captured by displaying MIN/MAX readServiceJunior Kit ing ● Graphic display with bar graph (trailing indicator), • function Delivery in storage-case peak & hold ● ● ● ●
• Incl. test point-adapters test hoses Measurement andand display of up to four measured values ServiceJunior Kit simultaneously. Proportional technology differential ● Delivery in storage-case values, addition, performance and signals are very easily ● Incl. test point-adapters and test hoses analysed. Catalogue 4054/UK
● Rapid fault diagnosis = high quality maintenance SensoControl The Parker Service Master Plus
The Parker Service Master Plus
● Pressure spike measurement 1 msec ● Measured value storage to record pressure This high-end instrument with innovative and unique features is aimed at the with various storage functions future andsequences is available worldwide. (auto trigger, start-stop, etc) ● USBCAN, PC LAN interface • Analogue, and USB interfaces • Measured value display: numerical,ofbar graph, pointer, curve graph ● Setting and evaluation measurement data with • Measurement and display of more than 50 channels “SensoWin” software.
SensoControl® ServiceJunior wireless
Utilising the• ServiceJunior wireless Parker’s Measurement data from are automatically displayed, stored and directly SensoControl of products you to comfort- PC software family analysed with theallows proven “SensoWin” Catalogue 4054/UK ably record • the pressure values taken or several Remote monitoring viafrom LAN,one regardless of location measurement points on your machine or installation. • Everything is measured, stored, monitored and analysed: Stored measurement data is transmitted to a PC across pressure, temperature, flow and speed distances of up to 150 meters.
s
•
This high-end instrument with innovative and unique features is aimed at the future and is available worldwide. ● Analogue, CAN, LAN and USB interfaces ● Measured value display: numerical, bar graph, pointer, curve graph ● Measurement and display of more than 50 channels ● Measurement data are automatically displayed, stored and directly analysed with the proven “SensoWin” PC software ● Remote monitoring via LAN, regardless of location ● Everything is measured, stored, monitored and analysed: pressure, temperature, flow and speed ● Up to 4 million measured values per measurement. Total measured value storage for more than 1 billion measured values ● Extensive choice of trigger methods
Catalogue 4054/UK
Q13
Q12
The Parker Service Master Plus Kit: ● Delivery in storage-case
Up to 4 million measured values per measurement.
data Total measured value storage ● Measured memory for storing pressurefor more than 1 billion measured values sequences • Extensive choice of trigger methods ● Network operations: monitor several measurement points ● Read-out data from measured data memory to the The Parker Service Master Plus Kit: PC via a radio interface ● SetParker and evaluate measurement using The Service Masterdata Plus Kit:PC Delivery in storage-case software• “JuniorWin” ● Delivery in • storage-case Incl. attachments ● Incl. attachments Catalogue 4054/UK • test point-adapters and test hoses ● test point-adapters and test hoses
Catalogue 4100-9/UK
Catalogue 4100-9/UK
5
Mento Hoses and Couplings Catalogue
14.8-6. Test Nipples, Hoses and Gauges
Back Flange for Lower connection N2T103C063
63mm BACK FLANGE 01.10/18
N2T10/18C100
100mm BACK FLANGE 01.10/18
N2T10/18C150
150mm BACK FLANGE 01.10/18
N2T20C100
100mm BACK FLANGE 01.20
N2T20C150
150mm BACK FLANGE 01.20
Front Flange for Lower connection N2T103E063
63mm FRONT FLANGE 01.10/18
N2T10/18E100
100mm FRONT FLANGE 01.10/18
N2T10/18E150
150mm FRONT FLANGE 01.10/18
"U" - Clamp for back connection N2T103B063UB
63mm U-CLAMP 01.10/18
N2T103B063UB2
63mm U-CLAMP 01.10/18 AISI 316
6
Mento Hoses and Couplings Catalogue
MGS10 M RB3 - 02/08
bourdon tube pressure gauges bourdon tube pressure gauges steel with copper alloy connection. Class 1,6 anti-vibration version, DSStainless 2.5” (63mm) anti-vibration version, DS 2.5” (63mm)D - BACK CONNECTION A - LOWER CONNECTION
ORDER TO IMPROVE THEIR PRODUCTION, MESSRS. NUOVA FIMA RESERVE THE RIGHT TO THEMSELVES TO MAKE ALL THE MODIFICATIONS THAT THEY DEEM INDISPENSABLE AT ANY TIME. UPDATED DATA-SHEETS ARE AVAILABLE ON SITE: www.nuovafima.com
DN MGS10 63 Mod 10
7
14.8-7. Test Nipples, Hoses and Gauges
LOWER CONNECTION BSP BACK CONNECTION BSP N2103A0632B042 N2103D0632B043 63mm 1/4" BSP -1/15 bar/psi 63mm 1/4" BSP -1/9 bar/psi N2103A0632B043 N2103D0632B053 63mm 1/4" BSP -1/9 bar/psi 63mm 1/4" BSP -1/5 bar/psi A LOWER CONNECTION D BACK CONNECTION engine compressors, turbines, diesel engines, N2103A0632B053 N2103D0632B063 63mm 1/4" BSP -1/5 bar/psi 63mm 1/4" BSP -1/3 bar/psi A LOWER CONNECTION D - BACK CONNECTION pulsating pressures or mechanical vibrations N2103A0632B063 N2103D0632B073 63mm 1/4" BSP -1/3 bar/psi 63mm 1/4" BSP -1/1,5 bar/psi er alloy and which do not have high viscosity N2103A0632B073 N2103D0632B083 63mm 1/4" BSP -1/1,5 bar/psi 63mm 1/4" BSP -1/0,6 bar/psi N2103A0632B083 N2103D0632B093 63mm 1/4" BSP -1/0,6 bar/psi 63mm 1/4" BSP -1/0 bar/psi N2103A0632B093 N2103D0632B113 63mm 1/4" BSP -1/0 bar/psi 63mm 1/4" BSP 0/1 bar/psi 63mm 63mm Weight (1) a b 1/4" BSP c 0/1 bar/psi d d1 N2103D0632B123 h p 1/4" BSP L 0/1,6 bar/psi ch Mounting F N2103A0632B113 N2103A0632B123 63mm 1/4" BSP 0/1,6 bar/psi 63mm W a b N2103D0632B133 c d d1 1/4" BSP h 0/2,5 bar/psip L ch F 21M -Mounting G 1/4N2103A0632B133 A 0.22” 63mm 1.10”1/4"0.39” 2.17” - 2.13” x 0.35” 0.28 lbs BSP 0/2,52.67” bar/psi 2.46” N2103D0632B143 63mm 1/4" 0.51” BSP 0/40.51” bar/psi Lower 21M G 1/4 A N2103A0632B143 63mm 1/4" BSP 0/6 (14 bar/psi 23M - 1/4-18 NPT 0.22” 1.10” N2103D0632B153 0.39”- 54,3) 2.67” 2.46” 2.17” - 2.13” 0.51” x 9) (55,3 kg) 0.51” x 0.35” (5,6) 63mm (28) 1/4" BSP (0,13 (10) 0/4 bar/psi (68) (62,6) (13) Lower N2103A0632B153 N2103D0632B163 63mm 1/4" BSP 0/6 bar/psi 63mm 1/4" BSP- 54,3) 0/10 bar/psi del 23M 1/4-18 NPT (14 x 9) (55,3 (5,6) (28) ( (10) (68) (62,6) (13) 0.22” 63mm 1.10”1/4" BSP 0/102.67” - 2.11” 0.51” x 0.35” 0.30 lbs 21M - G 1/4N2103A0632B163 A bar/psi 2.46” N2103D0632B1731.81”63mm 1/4" 0.39” BSP 0/16 bar/psi Back 0.22” 1.10” 2.67” 2.46” 1.81” 2.11” 0.39” 0.51” x 0.35” 21M G 1/4 A N2103A0632B173 N2103D0632B183 63mm 1/4" BSP 0/16 bar/psi 63mm 1/4" BSP 0/25 bar/psi (14 x 9) (54,8 - 53,8) (13) (5,6) (28) (68) (62,6) (0,14 kg) 23Mfluid. - 1/4-18 NPT lycerine 98%, silicon oil or fluorinated Back N2103A0632B183 63mm 1/4" BSP 0/25 (5,6) bar/psi (28) N2103D0632B193 63mm 1/4" BSP 0/40 bar/psi (14 x 9) (54,8 - 53,8) (13) (68) (62,6) ( 23M - 1/4-18 NPT ure: N2103A0632B193 N2103D0632B203 63mm 1/4" BSP 0/40 bar/psi 63mm BSP 0/60 bar/psi (1)1/4" add 0.15 lbs (0,07 kg) when filled +65 °C) with glycerine filling; dimensions : inches (mm) N2103A0632B203 N2103D0632B213 63mm 1/4" BSP 0/60 bar/psi 63mm 1/4" BSP 0/100 bar/psi 65 °C) with silicon oil filling; dimensions : inches (mm) N2103A0632B213 N2103D0632B223 63mm 1/4" BSP 0/100 bar/psi 63mm 1/4" BSP 0/160 bar/psi (1) add 0.15 lbs (0,07 kg) wh 65 °C) with fluorinated fluid filling. N2103A0632B223 N2103D0632B233 63mm 1/4" BSP 0/160 bar/psi 63mm 1/4" BSP 0/250 bar/psi erature: max +149°F (+65 °C). N2103A0632B233 N2103D0632B243 63mm 1/4" BSP 0/250 bar/psi 63mm 1/4" BSP 0/300 bar/psi illable model. N2103A0632B243 N2103D0632B253 63mm 1/4" BSP 0/300 bar/psi 63mm 1/4" BSP 0/400 bar/psi OPTIONS N2103A0632B253 N2103D0632B263 63mm 1/4" BSP 0/400 bar/psi 63mm 1/4" BSP 0/600 bar/psi N2103A0632B263 63mm 1/4" BSP 0/600 bar/psi OPTIONS Model fillable filled Model fillable filled B - “U”-clamp, for back connection pressure gauges ✦ ✦
bourdon tube pressure gauge bourdon tube pressure gauge anti-vibration heavy duty version, DS 4” (100mm) anti-vibration heavy duty version, DS 4” (100mm) B - connection “U”-clamp, for backgauges connection pressure DN 100 10 Stainless steel with gauges copper alloy connection. Class 1,6 flange,Mod for lower pressure ✦ C - Back Back flange, for lower connection pressure gauges Front flange, for C back pressure gauges - connection ✦ Apz) - LOWER CONNECTION Front flange, for back connection pressure gauges D - BACK CONNECTION E Dial: aluminium (min. 100 ✦ aluminium (min. 100 pz) Restrictor plug ø Q03 0.015 -“ Dial: (0,4 mm). Restrictor Suitable for fillingS06 with- silicone plug ø 0.015 “ (0,4 mm). Silicone filling
P01 -
✦✦ ✦✦ ✦
✦ ✦
Suitable for filling with silicone
- Silicone filling Fluorinated fluidS10 filling F30 - Fluorinated fluid filling Tempered glass window T37 - Tempered glass window
“HOW TO ORDER” SEQUENCE LOWER SEQUENCE CONNECTION BSP “HOW TO ORDER”
✦✦ ✦ ✦ ✦
✦
LOWER CONNECTION BSP
INDISPENSABLE AT ANY TIME. UPDATED DATA-SHEETS ARE AVAILABLE ON SITE: www.nuovafima.com
EQ03 S06 P01 S10 F30 T37 -
✦✦ ✦✦
RB3 - 02/08
MGS10 MGS
MGS10
N2102A1007B053 N2102B1007B033 1/2" BSP -1/5 bar connection 100mm 1/2" BSP -1/15 bar/psi Section / Model /Case / Diameter100mm / Range / Process / Options ISO 9001 : 2000 / Mounting LOWER D/ B, -Process BACK CONNECTION N2102A1007B063 N2102B1007B073 100mm 1/2" BSP -1/3 bar21M 100mm 1/2"/BSP -1/1,5 bar/psi compressors, turbines, engines, chemical, Cert. no.CONNECTION 0433/3 1A - diesel 10 2 Section A C C, E / Model /Case / Mounting / Diameter / Range connection Options A - LOWER CONNECTION D - BACK CONNECTION
ressures or mechanical vibrations are apparent. 3 1 h do not have high viscosity or do not cristalize.
Mounting Lower
del
Back
P 67 as per IEC 529. andard Model.
el
41M 43M 41M 43M -
dimensions : inches (mm)
N2102A1007B073 D 10 2 N2102A1007B093 3 N2102A1007B113
100mm 23M A1/2" BSP -1/1,5Cbar 100mm 1/2" BSP -1/0 bar D 100mm 1/2" BSP 0/1 bar d a b c d F 1 N2102A1007B123 F 100mm 1/2" BSP 0/1,6 a bar b Mounting N2102A1007B133 100mm 1/2" BSP 0/2,5 bar G 1/2 A 0.63” 4.35” 3.97” 0.51” 41M -1.91” G 1/2 A 1/2" BSP0.51” N2102A1007B143 100mm 0/4 bar 1.91” Lower 1/2-14 NPT (48,6) (16,1) (110,6) (101) (13) N2102A1007B153 100mm 1/2" BSP (13) 0/6 bar (48,6) 43M - 1/2-14 NPT N2102A1007B163 100mm 1/2" BSP 0/10 bar 0.51” 1.91” 4.35” 3.97” G 1/2 A 41M - G 1/2 A 1/2" BSP0.51” N2102A1007B173 100mm 0/16 bar 1.91” (48,6)100mm 1/2" BSP (110,6) (101) (13) 1/2-14Back NPT N2102A1007B183 0/25 bar (48,6) (13) 43M - 1/2-14 NPT N2102A1007B193 100mm 1/2" BSP 0/40 bar dimensions : inches (mm)
✦
✦
✦
✦ ✦
✦
✦ ✦
N2102B1007B093 -1/0E bar Q03...T37 21M100mm 1/2" BSP B, C, N2102B1007B133 100mm 1/2" BSP 0/2,5 bar N2102B1007B14323M100mm 1/2"Q03...T37 BSP 0/4 bar Weight (1) e h p ch L N2102B1007B153 100mm 1/2"eBSP 0/6 bar d1 We c d h p ch L N2102B1007B163 100mm 1/2" BSP 0/10 bar 1.14 lbs 3.38” 0.78” 0.86” 1 0.63” 4.35” 3.97” 0.78” 0.86” N2102B1007B173 100mm 1/2" BSP 0/163.38” bar (0,52 kg) (86) (20) N2102B1007B183 100mm 1/2"(22) BSP 0/25(86) bar (0 (16,1) (110,6) (101) (20) (22) N2102B1007B193 100mm 1/2"0.86” BSP 0/400.78” bar 1.22” 3.41” 1.25 lbs 0.78” 1.22” 0.86” 1 4.35” 3.97” N2102B1007B203 100mm 1/2" BSP 0/60 bar/psi 3.41” (20) (31) (22) 86,8 ) (0,57 ( N2102B1007B213 100mm 1/2"(31) BSP 0/100 bar/psi (86,8) kg)(22) (110,6) (101) (20) (0 N2102B1007B223 100mm 1/2" BSP 0/160 bar/psi N2102B1007B233 100mm 1/2" 0.72 BSP lbs 0/250 bar/psi (1) add (0,33 kg) when filled N2102B1007B253 100mm 1/2" BSP 0/400 bar/psi (1) add 0.72 lbs (0,33 kg) w NUOVA FIMA S.p.A. - www.nuovafima.com
P.O. BOX 58 - VIA C. BATTISTI 59 - 28045 INVORIO (NO) ITALY
Mento Hoses and Couplings Catalogue
MGS18 DN 63tubeMod 18gauge bourdon tube pressure gauge bourdon pressure
MGS1
Stainless Class 1,6 allconstruction, stainless steel all stainlessSteel. steel DSconstruction, 2.5” (63mm)DS 2.5” (63mm) A - LOWER CONNECTION
D - BACK CONNECTION
LOWER CONNECTION BSP
LOWER CONNECTION NPT
N2183A0632B033 Ø63mm -1/15 bar/psi 1/4" BSP A - LOWER CONNECTION
A - LOWER CONNECTION
63mm 1/4" BSP -1/9 bar/psi cryogenic, chemical and petrochemical processing industries, N2183A0632B043 id media which do not have high viscosity or do not cristalize. N2183A0632B053 63mm 1/4" BSP -1/5 bar/psi ac b ad1 a b d Mounting aF1 he ambient environment and theMounting process medium. ForFuse on N2183A0632B063 63mm 1/4" BSP -1/3 bar/psi 1 ssors, turbines, diesel engines, chemical, petrochemical and 21M G 1/4 A 21M G 1/4 A 0.37” 1.10” 0.22” 0.37” 63mm 1.10” 1/4"0.22” 0.39” 2.67” 2.46” BSP -1/0,6 bar/psi LowerN2183A0632B083 Lower ssures or mechanical vibrations are apparent, the liquid-filled 23M -(9,5) 1/4-1863mm NPT1/4"(5,6) (28) 23M - 1/4-18 NPTN2183A0632B093 (5,6) (28) (10) (68) (62,6) BSP -1/0(9,5) bar/psi
8.2- Fillable Model
8
14.8-8. Test Nipples, Hoses and Gauges
Back
1/4"0.22” BSP 0/12.67” bar/psi 0.37” 1.10” 21M -0.37” G 1/4 63mm A 1.10” 2.46” 0.22” 21M - G 1/4Back A N2183A0632B113 N2183A0632B123 63mm 1/4" BSP 0/1,6 bar/psi (9,5) (5,6) (28) (68) (62,6) 23M -(9,5) 1/4-18 (28) NPT 23M - 1/4-18 NPT (5,6)
N2183A0632B133 : inches (mm) dimensions : inches (mm)dimensions N2183A0632B143
ection degree: IP 67 as per IEC 529. OPTIONS g: stainless steel polished, crimped.
N2183A0632B153
OPTIONS N2183A0632B163
63mm 1/4"NPT -1/1,5 D -bar/psi BACK CONN D - BACK CONNECTION
N2183A0633B073
N2183A0633B093
63mm 1/4" NPT -1/0 bar/psi
N2183a0633b113 63mm 1/4" NPT 0/1 bar/psi c h d d1p hL ch pWeight (1) N2183A0633B133 63mm 1/4" NPT 0/2,5 bar/psi - 2.17” 0.39” - 2.17” 2.67” 2.46” 2.13” 0.51” N2183A0633B143 63mm 2.13” 1/4" NPT 0/4 0.55” bar/psi 0.28 lbs0.5 -(13) 55,3 (68) (62,6) (54,3 (14) 54,3 - 55,3 ) (0,13 kg)(1 ((10) N2183A0633B153 63mm 1/4" NPT 0/6 ) bar/psi
63mm 1/4" BSP 0/4
bar/psi
N2183A0633B163 63mm 1/4" NPT 0/10 0.55” bar/psi 2.11” - 2.15” 2.67” 2.11” 2.46” - 2.15” 0.30 lbs0.5 0.51” N2183A0633B173 63mm 1/4" NPT 0/16 bar/psi 53,8 54,8 ( (68) (53,8 (62,6) - 54,8) (14) (0,14) kg)(1 (13) N2183A0633B183 63mm 1/4" NPT 0/25 bar/psi addfilled 0.15 (1) add 0.15 0/40 lbs (0,07 kg) (1) when N2183A0633B193 63mm 1/4" NPT bar/psi
63mm 1/4" BSP 0/6
63mm 1/4" BSP 0/2,5 bar/psi bar/psi
N2183A0633B203
63mm 1/4" NPT 0/60 bar/psi
63mm 1/4" BSP 0/10 bar/psi
N2183A0633B213
63mm 1/4" NPT 0/100 bar/psi
63mm 1/4" BSP 0/16 bar/psi
N2183A0633B223 standard N2183A0633B233
63mm 1/4" NPT 0/160 bar/psi nter: not adjustable, aluminium, black. fillable standard Model fillable filled Model N2183A0632B183 63mm 1/4" BSP 0/25 bar/psi 63mm 1/4" NPT 0/250 bar/psi er features: as Standard Model. B - connection “U”-clamp, for back connection pressure gauges B - “U”-clamp, for back pressure gauges ✦ ✦✦ N2183A0632B193 N2183A0633B234 63mm 1/4" BSP 0/40 bar/psi 63mm 1/4" NPT 0/300 bar/psi Back flange, for lower connection pressure gauges C - connection pressure gauges C - Back flange, for lower ✦✦ ✦✦ ✦ N2183A0632B203 N2183A0633B253 63mm 1/4" BSP 0/60 bar/psi 63mm 1/4" NPT 0/400 bar/psi - connection Front flange, for back connection pressure gauges E - Front flange, forEback pressure gauges ✦✦ ✦✦ ✦ 8.3 - Filled Model N2183A0632B213 N2183A0633B263 63mm 1/4" BSP 0/100 bar/psi 63mm 1/4" NPT 0/600 bar/psi ✦ - Reference pointer "MN7" ✦ "MN7" L30 - Reference pointerL30 N2183A0632B223 N2183A0633B273 63mm 1/4" BSP 0/160 bar/psi 63mm 1/4" NPT 0/1000 bar/psi mping liquid: glycerine 98%, silicon or fluorinated P01 - silicone/Fluorinated ✦ P01 -oilSuitable Suitable for filling with silicone/Fluorinated fluid ✦ for filling with fluid N2183A0632B233 N2183A0633I213 63mm 1/4" BSP 0/250 bar/psi 63mm 1/4" NPT 0/10000 psi/bar d. filling ✦ Silicone filling S10 - Silicone S10 N2183A0632B253 63mm 1/4" BSP 0/400 bar/psi bient temperature: fluid filling - Fluorinated fluidF30 filling ✦ F30 - Fluorinated ..+149 °F (+15...+65 °C) with glycerine filling; N2183A0632B263 63mm 1/4" BSP 0/600 bar/psi .+149 °F (-45...+65 °C) with silicon filling;tempered window tempered window ✦ ✦✦ ✦✦ T37 - Glass T37oil - Glass N2183A0632B273 63mm 1/4" BSP 0/1000 bar/psi .+149 °F (-60...+65 °C) with fluorinated fluid filling. ✦ T32 - Safety glass window ✦ T32 - Safety glass window cess fluid temperature: max +149°F (+65 °C). BACK CONNECTION BSP BACK CONNECTION NPT ection degree: IP 67 as per IEC 529. N2183D0632B053 N2183D0633B042 63mm 1/4" BSP -1/5 bar/psi 63mm 1/4"NPT -1/15 bar/psi g: stainless steel polished, crimped. N2183D0632B063 N2183D0633B063 63mm 1/4" BSP -1/3 bar/psi 63mm 1/4" NPT -1/3 bar/psi nter: not adjustable, aluminium, black. N2183D0632B083 N2183D0633B113 63mm 1/4" BSP -1/0,6 bar/psi 63mm 1/4" NPT 0/1 bar/psi er features: as Standard Model N2183D0632B084 N2183D0633B142 63mm 1/4" BSP -1/0 bar/psi 63mm 1/4" NPT -1/0 bar/psi “HOW TO ORDER” SEQUENCE “HOW TO ORDER” SEQUENCE N2183D0632B113 N2183D0633B143 63mm 1/4" BSP 0/1 bar/psi 63mm 1/4" NPT 0/4 bar/psi N2183D0632B123 N2183D0633B153 63mm 1/4" BSP 0/1,6 bar/psi 63mm 1/4" NPT 0/6 bar/psi Section /N2183D0632B133 Model /Case / Mounting Diameter / Range / Process Options Section / Model /Case / Mounting / Diameter / Range //Process connection Optionsconnection N2183D0633B163 63mm 1/4" BSP 0/2,5 bar/psi 63mm 1/4"/NPT 0/10 bar/psi 18 1 A C 21M B, C, E 1 18 1 1 A C 21M B, C, E N2183D0632B143 N2183D0633B173 63mm 1/4" BSP 0/4 bar/psi 63mm 1/4" NPT 0/16 bar/psi 2 D 23M L30...T32 2 D 23M L30...T32 N2183D0632B153 N2183D0633B183 63mm 1/4" BSP 0/6 bar/psi 63mm 1/4" NPT 0/25 bar/psi 3 3 N2183D0632B163 N2183D0633B193 63mm 1/4" BSP 0/10 bar/psi 63mm 1/4" NPT 0/40 bar/psi N2183D0632B173 N2183D0633B203 63mm 1/4" BSP 0/16 bar/psi 63mm 1/4" NPT 0/60 bar/psi N2183D0632B183 N2183D0633B213 63mm 1/4" BSP 0/25 bar/psi 63mm 1/4" NPT 0/100 bar/psi ISO 9001 : 2000 N2183D0632B193 N2183D0633B223 63mm 1/4" BSP 0/40 bar/psi 63mm 1/4" NPT 0/160 bar/psi Cert. no. 0433/3 N2183D0632B203 N2183D0633B233 63mm 1/4" BSP 0/60 bar/psi 63mm 1/4" NPT 0/250 bar/psi N2183D0632B213 N2183D0633B253 63mm 1/4" BSP 0/100 bar/psi 63mm 1/4" NPT 0/400 bar/psi N2183D0632B223 N2183D0633B263 63mm 1/4" BSP 0/160 bar/psi 63mm 1/4" NPT 0/600 bar/psi N2183D0632B233 N2183D0633B2631 63mm 1/4" NPT 0/10000 psi/BAR 63mm 1/4" BSP 0/250 bar/psi N2183D0632B253 N2183D0633B273 63mm 1/4" BSP 0/400 bar/psi 63mm 1/4" NPT 0/1000 bar/psi N2183D0632B263 63mm 1/4" BSP 0/600 bar/psi N2183D0632B273 63mm 1/4" BSP 0/1000 bar/psi N2183A0632B173
Mento Hoses and Couplings Catalogue
9
14.8-9. Test Nipples, Hoses and Gauges
D - BACK CONNECTION
A - LOWER CONNECTION A - LOWER CONNECTION LOWER CONNECTION BSP
cal industries and for conventional and nuclear N2182A1007B034 process medium and by the environment and for N2182A1007B054 materials used to build the sensible element allows Mounting DS Mounting F DS
N2182A1007B074 E of dampening ment and assures better containment 41M - G 1/2EA N2182A1007B094 are: reduced pointer fluctuation, reduced wear of 4” (100) 4” (100) 43M - 1/2-14 NPT oreover condensation Lower N2182A1007B104 Lower and corrosive atmospheres G G 1/2G A 41M - N2182A1007B114 6” (150) 6” (150) 43M - N2182A1007B134 1/2-14 NPT able Model
ed Model
D - BACK CONNECTION D - BACK CONNECTION LOWER CONNECTION NPT
100mm 1/2" BSP -1/15 bar/psi
N2182A1008B054
100mm 1/2" a d N2182A1008B094 b d1 c a e F bBSP -1/5c bar/psi N2182A1008B114 100mm 1/2" BSP -1/1,5 bar/psi 0.51” 1.90” 0.59” 41M G 1/2 A 0.51” 1.90” 0.59” 4.35” 3.97” N2182A1008B134 100mm 1/2" BSP -1/0 bar/psi 43M (13)- 1/2-14 (48,5)NPT(15) (13) (110,6)(48,5)(101)(15) N2182A1008B144 100mm 1/2" BSP 0/0,6 bar/psi A 0.61” 0.59” 41M - G 1/2 1.96”5.88” 0.61” 0.59” 1.96” 100mm 1/2" BSP 0/1 bar/psi6.33”N2182A1008B154 (15) (50,5()149,6 (15,5 43M 1/2-14 NPT 50,5 15,5 (15) ( ( (161) ) ) ) ) N2182A1008B164 100mm 1/2" BSP 0/2,5 bar/psi
100mm BSP 41M - G 1/2" 1/2 A 0/4 0.51” 1.90” 41M - N2182A1007B144 G 1/2EA 4” (100) N2182A1007B154 100mm 1/2" BSP 0/6 48,5 (13) )NPT ( 43M 1/2-14 43M - 1/2-14 NPT Back N2182A1007B164 100mm 1/2" BSP 0/10 0.59”- G 1/2 1.96”A 41M 41M - G 1/2GA N2182A1007B174 100mm 1/2" BSP 0/16 6” (150) 50,5)NPT (15) ( 43M - 1/2-14 NPT 43M - 1/2-14
E
egree: IP 67 as per IEC 529. 4” (100) adjustable, aluminium, Back black. res: as Standard Model. G
6” (150)
N2182A1007B184 dimensions N2182A1007B194 : inches (mm) dimensions : inches (mm)
RB3.2 - 07/09
A - LOWER CONNECTION
MGS18 MG
PROVE THEIR PRODUCTION, MESSRS. NUOVA FIMA RESERVE THE RIGHT TO THEMSELVES TO MAKE ALL THE MODIFICATIONS THAT THEY DEEM INDISPENSABLE AT ANY TIME. UPDATED DATA-SHEETS ARE AVAILABLE ON SITE: www.nuovafima.com
DN 100 Mod 18 MGS18
bourdongauges tube pressure gauges bourdon tube pressure Stainless Steel. Class allconstruction, stainless 1,6 steel DS 4”, 6” (100-150mm) all stainless steel DSconstruction, 4”, 6” (100-150mm)
100mm 1/2" NPT -1/5 bar/psi 100mm d h 1/2" NPT d1p -1/0 ebar/psi h p Weight (1) L 100mm 1/2" NPT 0/1 bar/psi 4.35” 3.38” 3.97” 0.78” 3.38” 1.16 lbs 100mm 1/2" NPT 0/2,5 bar/psi (101) (86) (110,6) (0,53 kg) (86) (20) 100mm 1/2" NPT 0/4 bar/psi 6.33” 5.88” 4.602.09 lbs 4.60 0.78” 100mm 1/2" NPT 0/6 bar/psi (161) (149,6) (117) (117)1/2" 100mm NPT 0/10 (20) bar/psi (0,95 kg)
L
Wei
0.78” (20)
1.1 (0,
0.78” (20)
2. (0,
N2182A1008B174 0.51” 3.42” 0.78” 1. bar/psi 100mm 1/2"3.97” NPT 0/161.22” bar/psi 1.17 lbs 4.35”1.90” 3.97” 1.22”4.35” 3.42” 0.78” bar/psi 100mm 1/2"(101) NPT bar/psi (0,53 kg) 48,5)(101) (13) (20) (87) (0, (20) (110,6)(N2182A1008B184 (87)0/25 (31) (31)(110,6) N2182A1008B194 bar/psi 100mm 1/2"5.88” NPT 0/401.22” bar/psi 0.59” 3.36” 0.78” 1. 6.33”1.96”5.88” 1.22”6.33” 3.36” 0.78” 1.87 lbs N2182A1008B204 bar/psi 100mm 1/2" NPT 0/60 bar/psi (15) (20) (85,5) (0, (149,6 (20) (161)(50,5()149,6) (31) (161) (85,5) ) (31) (0,85 kg) N2182A1008B214 100mm 1/2" BSP 0/25 bar/psi 100mm 1/2" NPT 0/100 bar/psi 0.72 lbs (0,33 kg)100mm for 4”kg) (100) and lbs (0,75 kg) for DS 6” (150), w (1) add 0.72 0/40 lbs (0,33 kg)(1) foradd DS 4” (100) and 1.65 lbs DS (0,75 for DS 1.65 6” (150), when filled N2182A1008B224 100mm 1/2" BSP bar/psi 1/2" NPT 0/160 bar/psi
m 0...15 to 0...30000 psi (from 0...1 to 0...1600 bar or N2182A1007B204 100mm 1/2" BSP 0/60 bar/psi nits). quid: glycerine 98%, silicon oil or fluorinated fluid. N2182A1007B214 100mm 1/2" BSP 0/100 bar/psi mperature:OPTIONS OPTIONS N2182A1007B224 100mm 1/2" BSP 0/160 bar/psi F (+15...+65 °C) with glycerine filling; N2182A1007B234 100mm 1/2" BSP 0/250 bar/psi (-45...+65 °C) with silicon oil filling; Model Model (-60...+65 °C) with fluorinated fluid filling. N2182A1007B254 100mm 1/2"pressure BSP 0/400 bar/psi “U”-clamp, for back connection gauges B - connection for back pressure gauges B - max “U”-clamp, d temperature: +149°F (+65 °C). N2182A1007B264 100mm 1/2" BSP 0/600 bar/psi Back flange, for lower connection pressure gauges - connection Back flange, for C lower pressure gauges Cas- per IEC egree: IP 67 529. N2182A1007B274 100mm 1/2" BSP 0/1000 bar/psi adjustable,Ealuminium, black. Front flange, for back connection pressure gauges - connection flange, forEback pressure gauges - Front res: as Standard Model. N2182A1007B284 100mm 1/2" BSP 0/1600 bar/psi
2G1 - ATEX II 2G c version 2G1 - ATEX II 2G c version 2D1 - ATEX II 2GD c version ATEX II 2GD c version 2D1 BACK CONNECTION BSP MENTS FOR OXYGEN class 0,6 (1) 100mm 1/2" BSP -1/9 bar/psi Accuracy class 0,6 (1) - Accuracy K06 K06 N2182B1007B044 y criteria of standard EN837-1/2, the pressure L21 -44Maximum pointer IP 44 on plexiglas (2) L21 - be Maximum IPbaffle on N2182B1007B054 plexiglas window (2) xigen service must solid-frontpointer type (with 100mm 1/2" BSPwindow -1/5 bar/psi ety bursting back). L22 pointer IP 65 on plexiglas (2) 100mm 1/2" BSPwindow 0/2,5 bar/psi L22 Maximum pointer IP -65Maximum on N2182B1007B134 plexiglas window (2) uges suitable for this service are detailed on Suitable for filling with silicone N2182B1007B144 100mm 1/2" BSP 0/4 bar/psi Suitable for filling with silicone P01 ”, 6” (100-150 mm) sheet. P01 filling N2182B1007B154 100mm 1/2" BSP 0/6 bar/psi filling This S10version - Silicone S10 - Silicone igned in conformity to ATEX 94/9/CE. is N2182B1007B164 - Fluorinated fluid filling100mm 1/2" BSP 0/10 bar/psi F30 - Fluorinated fluidF30 filling N2182B1007B174 100mm 1/2" BSP 0/16 bar/psi T01 - Tropicalization T01 - Tropicalization ISO 9001 : 2000 N2182B1007B184 - Safety glass window 100mm 1/2" BSP 0/25 bar/psi T32 - Safety glass window Cert.T32 nr. 0433/3
N2182A1008B234
100mm 1/2" NPT 0/250 bar/psi
N2182A1008B254
100mm 1/2" NPT 0/400 bar/psi
N2182A1008B264
100mm 1/2" NPT 0/600 bar/psi
N2182A1008B274 standard N2182A1008B284 ✦ N2182A1008I214 ✦ ✦
100mm 1/2" NPT 0/1000 bar/psi fillable standard fillable filled 100mm 1/2" NPT 0/1600 bar/psi ✦✦ ✦✦ 100mm 1/2" NPT 0/10000 psi/bar ✦✦ ✦✦ ✦✦
✦✦
fille ✦ ✦ ✦
See the ATEX pressure gauges See the ATEX pressure gauges data-.sheet for technical details data-.sheet for technical details BACK CONNECTION NPT ✦ NPT -1/1,5 bar/psi ✦ ✦ N2182B1008B074 100mm ✦ 1/2" N2182B1008B134 ✦ N2182B1008B144 ✦
✦ NPT 0/2,5 bar/psi 100mm 1/2" 100mm ✦ 1/2" ✦ NPT 0/4
bar/psi
N2182B1008B154
100mm ✦ 1/2" NPT 0/6
bar/psi
✦✦ ✦
N2182B1008B164
100mm 1/2" NPT 0/10 bar/psi
✦
N2182B1008B174
100mm 1/2" NPT 0/16 bar/psi
✦ ✦
✦ ✦ N2182B1008B184 100mm 1/2" NPT 0/25 bar/psi ✦ ✦ ✦✦ ✦✦ N2182B1008B194 100mm 1/2" NPT 0/40 bar/psi ✦ ✦ ✦✦ ✦✦ N2182B1007B194 N2182B1008B204 100mm 1/2" BSP 0/40 bar/psi 100mm 1/2" NPT 0/60 bar/psi (1) to For6000 pressure ranges 6000 psi (400 bar). Not available for (1) For pressure ranges up psi (400 bar). up Nottoavailable N2182B1007B204 N2182B1008B214 100mmfor 1/2" BSP 0/60 bar/psi 100mm 1/2" NPT 0/100 bar/psi (2)area Accuracy refers the area free fromaction. the maximum pointer receivers. (2) Accuracy refers to the free from theto maximum pointer receivers. N2182B1007B214 N2182B1008B224 100mm 1/2" BSP 0/100 bar/psi 100mm 1/2" NPT 0/160 bar/psi N2182B1007B224
100mm 1/2" BSP 0/160 bar/psi
N2182B1008B234
100mm 1/2" NPT 0/250 bar/psi
N2182B1007B234
100mm 1/2" BSP 0/250 bar/psi
N2182B1008B254
100mm 1/2" NPT 0/400 bar/psi
N2182B1007B254
100mm 1/2" BSP 0/400 bar/psi
N2182B1008B264
100mm 1/2" NPT 0/600 bar/psi
N2182B1007B264
100mm 1/2" BSP 0/600 bar/psi
N2182B1008B274
100mm 1/2" NPT 0/1000 bar/psi
N2182B1007B274
100mm 1/2" BSP 0/1000 bar/psi
N2182B1008B284
100mm 1/2" NPT 0/1600 bar/psi
“HOW TON2182B1007B284 ORDER” SEQUENCE “HOW TO ORDER” SEQUENCE 100mm 1/2" BSP 0/1600
bar/psi
Section / Model / Mounting Diameter / Range // Process Section / Model /Case / Mounting / /Case Diameter / Range // Process connection Optionsconnection / Options
1
18
1 2 3
1
A 18 D
1E 2G 3
A D
E 41M G 43M
B, C, E41M 43M 2G1...T32
B, C, E 2G1...T32