Mercian Surgical Burs and Hand Pieces

CHARACTERISTICS OF THE 'TOLLER DESIGN' BUR

Three Cutting Blades with very course cross-cut which prevents clogging.

Six Blades provide clean, fast cutting with minimum vibration.

Long Shank permits deep penetration with increased visibility.

Throw-Off Ring prevents fluid from operating area entering the handpiece.

Reverse Twist of blades draws irrigating fluid to extreme cutting tip.

The Toller Tapered Bur features a 3 bladed reverse twist to the cutting edge to prevent the flute clogging up. This blade design also draws the irrigation fluid to the bur tip where it is needed most.

● The longer slim neck allows deeper penetration with increased visibility for the clinician.

● The throw off ring prevents fluid from backing into the handpiece.

● Tungsten Carbide neck ensures optimum strength, performance and durability.

Using a bur rather than a chisel to remove impacted molars reduces the post-operative swelling and discomfort. Avoids the possibility of lingual nerve damage and preserves bone structures.

Recommended technique

It is recommended to use both Tapered Fissure and the Round Head Burs as a pair in conjunction to achieve a successful outcome.

When sectioning molars (the process of dividing up the tooth) start from the middle of the tooth;

1. Use the Toller 2.3mm Round Bur to make a hole in the centre of the molar.

2. Change burs to the Taper Fissure Bur, insert into the hole in the centre and work outwards using a ‘pistoning’ technique together with continual irrigation to ensure the flutes of the burs are kept clean and the cutting is efficient taking care not to apply too much pressure laterally. Deviation from this technique may result in the bur breaking.

3. Insert a Couplands Elevator into the fissures created – then rotate the elevator to split the tooth for ease of removal.

N.B;

Use of the irrigation prevents both the overheating of the bur, structures and also the clogging of the bur flutes.

DO NOT;

1. Use the Tapered Bur to drill a downward hole in the molar - this has the potential to break the bur as it is not designed to cut on the end - only on the side!

2. Use the Round Head Bur to make the side cut - this results in the slot being too wide not allowing the Coupland Elevator tip enough purchase to twist and split the molar into two sections for easier removal.

Toller Round Head Bur

● Tungsten Carbide with blood ring

● ISO standard 2.35mm Ø shaft

Toller Tapered Fissure Bur

● Tungsten Carbide cross cut with blood ring

● ISO standard 2.35mm Ø shaft

Tapered Fissure Bur

● Tungsten Carbide

● 50mm length

● Stronger neck

16

16

Sterile packed in boxes of 10

Sterile packed in boxes of 10

ORAL SURGERY BURS

Round Head Bur

● Tungsten Carbide

● 44mm length

● ISO standard 2.35mm Ø shaft

Sterile packed in boxes of 10

*Only available in stainless steel

Tapered Fissure Bur

● Tungsten Carbide

● 44mm length

● Cross cut

● ISO standard 2.35mm Ø shaft

Sterile packed in boxes of 10

Lindemann Side Cutting Burs

●

Sterile packed in boxes of 5

Apicectomy Bur

● Tungsten Carbide

● 44mm length

● Stainless steel

● ISO standard 2.35mm Ø shaft

Sterile packed in boxes of 10

ACRYLIC TRIMMER BURS

Bud Bur

● Cross cut

● Stainless steel

Diamond Dermabrasion Cone Bur

● 44mm length

● Stainless steel

Head size 50mm length Code No. 70mm length Code No.

5.0mm SB0544 - 50 SB0570- 50

6.0mm SB0544 - 60 SB0570- 60

50mm sterile packed in boxes of 10 70mm sterile packed in boxes of 5

Used in skin resurfacing procedures

Head size Code No. 7.0mm SB1644- 70

Sterile packed in boxes of 5

ENT Rosen Cutting Bur

●

ENT Diamond Polishing Bur

●

SURGICAL HANDPIECES

Straight Oral Surgery Handpiece

● 1:1 transmission

● For 44mm + 50mm length burs

● Max speed 40,000 RPM

PMRM1124

Straight High Speed Handpiece

● 1:2 transmission

● For 44mm + 50mm length burs

● Max speed 80,000 RPM

1600436- 001 Single use bur guard prevents fluid ingress into handpiece

Straight Oral Surgery Handpiece

● 1:1 transmission

● For 44mm + 50mm length burs

● Max speed 40,000 RPM

MT1124- 00

Contra - Angled Handpiece

● 1:1 transmission

● For latch burs

● Max speed 40,000 RPM

● External irrigation

1600200 - 001

Micro Rose Head Apicectomy Bur

● Plain cut

● 10mm length

● Stainless steel

Surgical Instruments of Excellence

Irrigation nozzle

231 - 14 - 03

Bur Guard Single Use

1501317

Head size Code No. 0.6mm SB0110 - 06

1.0mm

SB0110 -10

Sterile packed in boxes of 5

SURGICAL HANDPIECES

Straight Surgical Handpiece

● 1:1 transmission

● For 70mm length burs

● Max speed 40,000 RPM

1600206 - 001

Irrigation nozzle

1500096- 001

Angled Surgical Handpiece

● 1:1 transmission

● For 70mm length burs

● Max speed 40,000 RPM

1600207 - 001

Irrigation nozzle

1500096- 001

Angled LONG Handpiece

● 1:1 transmission

● For 95mm length burs

● Max speed 40,000 RPM

1600336 - 001

Irrigation nozzle

1500097- 001

Angled High Speed Handpiece

● 2x speed multiplier

● For 70mm length burs

● Max speed 80,000 RPM

1600295 - 001

Irrigation nozzle

1500096- 001

MICRO SAW HANDPIECES

Reciprocating Micro Saw Handpiece

● Max speed 15,000 RPM

● Blade thickness 0.25mm

Sterile packed blades in boxes of 12

Osseoscalpel Micro Saw Handpiece

● Ideal for use on cranial bone

● Max. speed 20,000 RPM

● Blade thickness 0.35mm

Sterile packed blades in boxes of 12

MICRO SAW HANDPIECES

Sagittal Micro Saw Handpiece

● Max speed 20,000 RPM

● Blade thickness 0.35mm

Sterile packed blades in boxes of 12

Oscillating Micro Saw Handpiece

● Max speed 15,000 RPM

● Blade thickness 0.3mm

- 24 - 00

Sterile packed blades in boxes of 5

SURGICAL DRILL SYSTEM

The MT5000 Micro Torque Surgical Drill is a multi speciality system, equipped with a state of the art powerful micro motor which is reliable and compatible with current handpieces.

The variation of handpieces available are ideally suited to Maxillo Facial and ENT Surgery.

The precisely controlled Irrigation System irrigates to optimise cutting efficiency.

● Autoclavable micro motor

● Irrigation system

● Digital display

● Programmable settings

● Full handpiece range

Controlled Irrigation allows simple set up with lower settings for ENT Surgery

Forward & Reverse

Programmable Micro Motor Speed up to 40,000 RPM

Controlled Irrigation Flow up to 100 ml per minute

Autoclavable Micro Motor self cooling, max 40,000 RPM

SURGICAL DRILL SYSTEM

Electronic Console with Irrigation Pump

● Micro processor controles

● Irrigation flow levels

● Forward & reverse direction

● 2 preset programmes

Code No.

MT5010- 00

Irrigation Pump

● Precise flow rates from 5ml up to 100ml per minute

Forward & reverse Irrigation On/Off

Multifunction Footswitch Control

● Switches irrigation on & off

● Changes direction of Micro Motor forward & reverse

● Control of Micro Motor speed

Code No.

MT5011- 00

Mobile Stand

● Drawer to hold accessories

● Convenient mobile platform for system

Code No.

MT5017- 00

Foot pedal to control speed

MICRO MOTOR & ACCESSORIES

Basch Micro Motor with Cable

● Speed from 500 to 40,000 RPM

● Brushless design allows sterilization in an autoclave

● High torque micro motor 40 Ncm

● Intra fitting for handpieces

● Weight 115grams

Complete Motor and Cable Set

Sterile Irrigation Tubing

MT5243- 00

MT5012- 00

49- 97- 02

Wire Sterilising Basket for Motor Cable

MT5016- 00

Clips

For fixing sterile irrigation tubing onto cable (pack of 10)

Surgical Instruments of Excellence

Micro Motor only

Cable only

MT5013- 00

MT5014- 00

Sterile packed in boxes of 10

1600064- 006

Lubrifluid Spray for Handpieces

500ml Can (box of 6 cans)

1600064- 006/1 (single can)

BIPOLAR FORCEPS

Bipolar Forceps

12.5cm/5" length Tip size

700- 600- 011S 1mm Regular tip

15cm/6" length Tip size

700- 600- 039S 1.5mm Broad tip

Bipolar Cables

● Fitting Block End Forceps

● Erbe BM780 Machine Fitting

● 4.5 metre length

Bipolar Coagulation

Unit BM780 MK II

● 70 Watts

● Foot switch control

36- 00- 80- 01

● Fitting Block End Forceps

● Banana Plug Vallylab Machine Fitting

● 4.5 metre length

● Fitting the Mallis 2-Pin Forceps

● Banana Plug Vallylab Machine Fitting

● 4.5 metre length

37- 01- 35L

37- 01- 38L

37- 01- 35S

36- 01- 05 Foot Switch