Mercians head office, located just south of Birmingham, centrally in the UK and ideally situated to service our hospitals throughout the UK, Ireland and indeed worldwide.
Mercian Surgical Supply Co. Limited 10 Topaz Business Park, Topaz Way, Bromsgrove, Worcestershire B61 0GD. UK.
Mercian has been established since 1968 as a supplier of high quality surgical instrumentation.
We present our catalogue detailing our range of instrumentation for Plastics & Maxillo Facial Surgery.
These specialist instruments are manufactured to the highest possible standards with the most modern processes.
STANDARDS
Mercian is certified to meet standard ISO 13485: 2016. Recognised as a mark of excellence applicable to our management systems, processes and procedures. We are subject to continual assessment of these procedures to ensure standards are maintained by an independent outside notified body.
Annual surveillance ensures our compliance with ISO 13485: 2016, MDD 93/42/EEC Annex II and MDR 2017/745.
WARRANTY
To ensure our instruments perform as expected, all Mercian instruments are covered by a 12 month warranty covering any manufacturing/material defect. Any instrument failing these standards will be repaired or replaced without charge.
CODE NUMBERS
Mercian code numbers are designed to allow you to identify an instrument from only the number.
SELF RETAINING RETRACTORS
DISSECTORS
MAXILLO FACIAL INSTRUMENTS
NASAL
WIRING INSTRUMENTS
MICRO INSTRUMENTS
FACELIFT SCISSORS
Gorney Facelift Scissors
● Tungsten carbide edges
● Bevelled blades
Straight Curved Length
PL2010 -17 PL2011-17 17cm/6 ¾"
PL2010 -19 PL2011-19 19cm/7½"
PL2010- 23 PL2011- 23 23cm/9"
Gorney-Freeman Facelift Scissors
● Tungsten carbide edges
● Open shanks
● Bevelled blades
Straight Curved Length
PL2020 -17 PL2021-17 17cm/6 ¾"
PL2020 -19 PL2021-19 19cm/7½"
PL2020- 23 PL2021- 23 23cm/9"
Kaye Facelift Scissors
● Tungsten carbide edges
● Curved
● Bevelled blades
Code Length
PL2031-17 17cm/6 ¾"
PL2031-19 19cm/7½"
Aufricht Scissors
● Tungsten carbide edges
● Curved
● Bevelled blades
Code Length
PL2041-14 15cm/6"
Goldman-Fox Scissors
● Tungsten carbide edges
● Tapered blades to fine tips
● Curved
Code Length
PL2051-13 13cm/5"
FACELIFT SCISSORS
Ragnell (Kilner) Scissors
● Tungsten carbide edges
● Curved flat tips
Code Length
PL2061-13 13cm/5¼"
PL2061-15 15cm/6"
PL2061-18 18cm/7"
Greenberg PAR Scissors
● Tungsten carbide edges
● Curved tapered flat tips
Code Length
PL2071-11 11.5cm/4¼"
Littler Scissors
● Curved
tips
tips
● Hole in the tips of blades for the suture to be threaded through
Code Length
PL2081-12 12cm/4¾"
Kahn Facelift Scissors
● Super Cut edges
● Curved
Code Length
PL2091-14 14.5cm/5¾"
Fomon Saber Facelift Scissors
● Super Cut edges
● Curved, round blunt tips
Code Length
PL2101-13 13.5cm/5¼"
RIBBON SCISSORS
Ribbon Handle Fine Scissors
● 10cm/4" length
● Very fine curved blades
Curved
PL2301-10
Ribbon Handle Stevens Tenotomy Scissors
● 10cm/4" length
Straight
PL2302 -10
Curved For hypospadias procedures
-10
Ribbon Handle Stevens Tenotomy Scissors
● 10cm/4" length
● Micro serrated cutting edge
● Blunt curved blades
PL2333 -10
Ribbon Handle Iris Scissors
● 10.5cm/41⁄8" length
Straight
PL2305 -10
Curved
PL2306 -10
Kaye Blepharoplasty Scissors
● 11.5cm/4½" length
● Serrated cutting edge
● Tungsten carbide edges
Curved
PL2075 -11
PL2303
SCISSORS
Iris Scissors
● 11.5cm/4½" length
● Micro serrated cutting edge
● Sharp tips
Straight
E A7612 -11
Strabismus Scissors
● 11.5cm/4½" length
● Micro serrated cutting edge
● Blunt tips
Straight
E A7622 -11
Curved
E A7613 -11
Curved
E A7623 -11
Waldram Scissors (with larger bows)
● 12.5cm/5" length
● Micro serrated cutting edge
● Blunt tips
Curved
E A7663 -12
Jabaley Scissors
● 13cm/5" length
● Micro serrated cutting edge
● Sharp tips
Curved
E A7615 -13
TENOTOMY SCISSORS
Stevens Baby Tenotomy Scissors
● 9cm/3½" length
Curved
PL2063- 09
Stevens Tenotomy Scissors TiN Coating
● 12cm/4¾" length
● CERACUT serrated cutting edge
Curved
E A7633 -12CC
Titanium Nitride coating increases surface hardness resulting in a sharper scissor with a smooth cutting performance.
Stevens Tenotomy Scissors
● 11.5cm/4½" length
● Micro serrated cutting edge
Straight
E A7632 -11
Curved
E A7633 -11
Stevens-Stille Pattern Tenotomy Scissors
● 12.5cm/5" length
● Micro serrated cutting edge
● Larger oversized rings
Curved
E A7633 -12
Jameson-Werber Scissors
● 13cm/5" length
● Micro serrated cutting edge
Curved
E A7643 -13
Popular for hand surgery.
Larger bows
SCISSORS
Jameson Scissors TiN Coating
● 15cm/6" length
● CERACUT serrated cutting edge
Curved
E A7643 -15CC
Titanium Nitride coating increases surface hardness resulting in a sharper scissor with a smooth cutting performance.
Jameson Scissors
● 15cm/6" length
● Micro serrated cutting edge
Curved
E A7643 -15
Reynolds Scissors
● 15cm/6" length
● Strong pattern
● Micro serrated cutting edge
Curved
E A7645 -15
Crayford- Reynolds Scissors
● 18cm/7" length
● Micro serrated cutting edge
Curved
E A7643 -18
Thicker shanks and blade
SCISSORS
Slim Baby Metzenbaum Easy-Cut Scissors
● 14cm/5½" length
● Micro serrated cutting edge
Curved
E A7661 -14
Slim Metzenbaum Easy-Cut Scissors
● 18cm/7" length
● Micro serrated cutting edge
Curved
E A7661 -18
Baby Metzenbaum Easy-Cut Scissors
● 14cm/5½" length
● Micro serrated cutting edge
Curved
E A7663 -14
McIndoe / Metzenbaum Easy-Cut Scissors
● 18cm/7" length
● Micro serrated cutting edge
Curved
E A7663 -18
Metzenbaum Scissors TiN Coating
● 18cm/7" length
● CERACUT
● Serrated cutting edge
Curved
E A7663 -18CC
Titanium Nitride coating increases surface hardness resulting in a sharper scissor with a smooth cutting performance.
Parker - Langenbeck Retractor (set of 2) Insulated
● 22cm/8" length
● Double ended
PL4500- 22i
Czerny Retractor
● 18cm/7" length
● Double ended
● 36mm depth blade
PL4510 -18
SELF RETAINING RETRACTORS
Alms Retractor
● 4 x 4 teeth blunt
● Prong depth 4mm
Ideal for small incisions
7cm/2¾" length
HA5200- 70
Baby Weitlaner S/R Retractor
● 11.5cm/4½" length
● 2 x 3 blunt prongs
HA5701 -10
Mollison S/R Retractor - Child
● 13cm/5¼" length
● 2 x 2 sharp prongs
● Prong depth 12mm
● Curved
SP4005 -13
Mollison S/R Retractor - Adult
● 17cm/6¾" length
● 4 x 4 sharp prongs
● Prong depth 14mm
● Curved
SP4005 -17
Travers S/R Retractor Curved
● 20cm/8" length
● 4 x 4 blunt prongs
● Prong depth 26mm
SP4016- 20
Alms Retractor - Long
● 4 x 4 teeth blunt
● Prong depth 5mm
Surgical Instruments of Excellence
10cm/4" length
HA5200 - 10
SELF RETAINING RETRACTORS
Wests S/R Retractor
● 14cm/5½" length
● 3 x 4 sharp prongs
● Prong depth 18mm
SP4003 -14
Weitlaner S/R Retractor
● 14cm/5½" length
● 3 x 4 blunt prongs
● Prong depth 18mm
SP4002 -14
Irwin S/R Retractor
● 17.5cm/6¾" length
● 4 x 4 prongs
● Prong depth 20mm
SP4018 -17 Sharp prongs
SP4019 -17 Blunt prongs
Travers S/R Retractor
● 20cm/8" length
● 4 x 5 blunt prongs
● Prong depth 26mm
SP4004- 20
Norfolk and Norwich S/R Retractor
● 20cm/8" length
● 4 x 5 blunt prongs
● Prong depth 50mm x 23mm width
SP4000- 20
With deeper prongs
● Prong depth 70mm
SP4000- 22
DISSECTORS
Freers Elevator/Dissector
● 19.5cm/7¾" length
HA7602 - 18
Watson Cheyne Dissector
Size
HA7203 -18 18cm/7"
SP9203 - 23 23cm/9"
SP9203 - 25 25.5cm/10"
MacDonald Elevator/Dissector
Size
HA7105 -19 19cm/7½"
SP9206 - 23 23cm/9"
Howarth Elevator
● 22cm/8¾" length
SP9207- 21
Mitchels Trimmer
● 16cm/6 ¼" length
HA5008 -16
SCALPEL HANDLES & MARKING PENS
Barrons Scalpel Blade Handle No.3
● 13cm/5¼" length
HA5001-13
Beaver Blade Holder
● 13cm/5¼" length
HA5004 -13
Eckoff Mapping Pen
● 14.5cm/5 ¼" length
HA5002 -14
Sommerlad Marking Pen
● 15cm/6" length
HA5003 -15
Ink Pot
● Stainless steel
HA5006- 99
SKIN GRAFT KNIVES
Watson Skin Graft Knife
● 30.5cm/12" length
Right handed
PL3100- 30
Left handed
PL3101- 30
The roller bar is smooth and does not oscillate or rotate in use. The graft thickness is controlled by slackening the locking nut and rotating the adjuster nut until the required thickness and then set by tightening the locking nut. The graft thickness is consistent as the roller bar can only be adjusted in parallel.
Braithwaite Skin Graft Knife
● 30.5cm/12" length
Right handed
PL3120- 30
The grooved roller bar oscillates from side to side as well as rotating. The graft thickness is controlled by rotating the adjuster nuts at the end of knife, this will move the roller bar up or down.
Humby Skin Graft Knife
● 36.5cm/14¼" length
Right handed
PL3110- 36
Left handed
PL3111- 36
The grooved roller bar rotates and oscillates from side to side. The graft thickness is controlled by adjusting the thumb screws on top of the support pillars.
Silver Skin Graft Knife
● 19cm/7 ½" length
Right handed
PL3140 -19
Knife Blades code
Cobbett 9940
Watson 9940
Braithwate 9940
Silver 9942
Skin Graft Board 200mm x 100mm 6mm thick, bevelled edge
PL3190- 20
Peek
Locking nut
Adjuster nut
Adjuster nut
Adjuster screws
FACELIFT FORCEPS
Assumpcao Facelift Forceps
● 16cm/6 ¼" length
● For precise marking of dissected facial flaps for excision
Without rachet
PL3200 -16
With rachet
PL3201-16
*illustrated with rachet
Pitanguy Forceps
● Flap demarcator for accurate marking of facial flaps for excision
Code Length
PL3210 -15 15cm/6"
PL3210- 26 26cm/10¼"
Marten Flap Forceps
● 14.5cm/5 ¾" length
*illustrated (for abdominal flaps)
● For accurate marking of skin flaps
Without ratchet
PL3220 -14
With ratchet
PL3221-14
Martel Flap Grasping Forceps
● 14cm/5 ¼" length
● Two pins in opposing holes on the jaws
PL3230 -14
*illustrated
BREAST INSTRUMENTS
Freeman Areola Marker
Code Diameter
PL4110- 36 36mm Ø
PL4110- 38 38mm Ø
PL4110- 40 40mm Ø
PL4110- 42 42mm Ø
PL4110- 45 45mm Ø
Grossman Areola Marker
● 4 sizes in 1
● Marking 40mm/44mm/48mm & 52mm Ø
PL4150- 52
McKissock Keyhole Breast Reduction Marker
Code Diameter
PL4140- 38 38mm Ø
PL4140- 42 42mm Ø
PL4140- 45 45mm Ø
Freeman Double Ended Areola Marker
Code Diameter
PL4120- 38 38/42mm Ø
PL4120- 42 42/45mm Ø
Galvao Nipple Marker
Code Diameter
PL4130- 40 40mm Ø standard
PL4130- 50 50mm Ø large
● Precisely marks amount of tissue for removal
● Used together with Freeman Marker
● Arms are graduated in centimeters for marking tissue to be removed
Mammoplast Breast Retractor
● Self retaining ratchet
● Adjustable to hold breast during surgery
PL4200- 00
The Mammostat Retractor allows circumferential constant pressure to be applied to the breast, allowing for ease of de-epithelization.
BREAST INSTRUMENTS
Breast Spatula - semi malleable
● 31.5cm/12½" length
● 150mm x 25mm blade
● With serrated tip
PL4211- 31
Agris- Dingman Transaxillary Dissector Set
● 36cm/14" length
● For creation of submammary pockets
● Set of 2 - left & right
PL4212- 36
MacCollum- Dingman Breast Dissector
● 41cm/16" length
● With angled shaft
PL4213- 41
For tissue dissection in the transaxillary approach.
BREAST INSTRUMENTS
Tebbetts Breast Retractor
● Fibre optic illumination
● Suction for smoke evacuation Blunt
PL4301- 24 90mm 24mm
PL4302- 30 90mm 30mm
PL4303- 36 150mm 36mm
PL4304- 36 190mm 36mm
PL4311- 24 90mm 24mm
PL4312- 30 90mm 30mm
PL4313- 36 150mm 36mm
PL4314- 36 190mm 36mm
Breast Retractor Double Ended
● 23cm/9" length
Blunt
LIGA CLIP APPLICATOR FORCEPS
Micro Vessel Clip Applicator
● 15cm/5¾" length
● For use with GEM Micro Vessel Clips
MV6500 -15
Liga Clip Applicator
● For use with Ethicon, Weck and SLS clips Small Clip
15cm
MV9900 -15S 19cm
15cm
19cm
15cm
19cm
28cm
19cm
28cm
19cm
28cm
MV9901-15
MV9901-19
MV9902 -15
MV9902 -19
MV9902- 28
MV9903 -19
MV9903 -28
MV9904 -19
MV9904 -28
MV9900 -19S
MV9901-15S
MV9901-19S
MV9902 -15S
MV9902 -19S
MV9902- 28S
MV9903 -19S
MV9903- 28S
MV9904 -19S
MV9904 -28S
BROWLIFT INSTRUMENTS
For endoscopic forehead facelift surgery with ergonomic handles.
Frontotemporal Dissector
● 22.5cm/8¾" length
● Straight 10mm wide
260- 020 -100
Surgical Instruments of Excellence
For initial dissection through forehead incisions
Frontotemporal Dissector
● 24cm/9½" length
● Curved 7mm wide
260 - 020 -101
For initial dissection
Periosteal Dissector
● 25cm/9 ¾" length
● Curved 9mm wide
260- 021-100
Periosteal Dissector/Elevator
● 24cm/9½" length
● S- shaped 5mm wide
260- 025 -100
For a posterior scalp dissection
For elevation of the periosteum
Frontoglabellar Dissector
● 26cm/10½" length
● S- shaped 7mm wide
260- 023 -100
Temporal Line Dissector
● 23.5cm/9¼" length
● Straight 10mm wide
260- 022 -100
Used in the dissection of the naso-glabellar area of the forehead
Separates the temporal fascia
BROWLIFT INSTRUMENTS
Zygomatic Arch Elevator
● 22.5cm/8¾" length
● Straight 5mm wide
260- 027 -100
For use in the lower eyelid approach
Scalp Elevator
● 25.5cm/10" length
● Curved 12mm wide
260- 001 -101
Flap Dissector
● 22.5cm/8¾" length
● Curved 6mm wide
260- 026 -100
For dissection of the deep temporal fascia
Arcus Marginalis Dissector
● 24cm/9½" length
● S- shaped 8mm wide
260- 024 -100
Endoforehead Elevator
● 24cm/9½" length
● Half curved 7mm wide
260- 002 -101
For dissection along the orbital rim
Orbital Rim Dissector
● 24cm/9½" length
● Half curved
260- 004 -101
BROWLIFT INSTRUMENTS
Nerve Hook
● 24cm/9½" length
260- 003- 002
Curved right
Nerve Retractor
● 17cm/9¾" length
260- 008- 002
Curved left
Suction Elevator
● 26cm/10¼" length
● Slightly curved
● Round edge tip 8mm wide
260- 002 - 005
Mini Forehead Elevator
● 18cm/7" shaft
260- 003- 003
Curved left
260- 008- 003 Curved right
Shaper Hook Sissors & Forceps
● 2.7mm diameter
● Insulated shaft
Shaper Hook Scissors
Curved left
260- 203- 800
Curved right
260 - 203- 700
Shaper Grasping Forceps
Curved left
260- 204 - 800
Curved right
260- 204 - 900
Shaper Punch Forceps
Curved left
260- 304- 800
Curved right
260- 304- 900
BROWLIFT INSTRUMENTS
Autoclavable Telescope
● 4mm diameter, 30˚angle
260 -104 - 030
Container for Telescope
600- 290- 052
Sheath for Telescope
● For 4mm telescope
● 2 rotating stopcocks and flat spatula tip
251- 340 -175
Sheath for Telescope
● For 4mm telescope
● 1 rotating stopcock and curved spatula tip
260- 502 -180
Fibre Optic Light Lead
250- 035 -180 1800mm 3.5mm Ø
250- 035- 230 2300mm 3.5mm Ø
250- 035- 300 3000mm 3.5mm Ø
250- 048 - 180 1800mm 4.8mm Ø
250- 048 - 230 2300mm 4.8mm Ø
250- 048 - 300 3000mm 4.8mm Ø
NASAL INSTRUMENTS
Giunta Nasal Scissors
● 13.5cm/5¼" length
● Tungsten carbide edges
● Angled blades
PL2501-13
Daniels Nasal Scissors
● 10cm/4" length
● 40˚angled blades
PL2511-10
For dissection of Nasal Tip Cartlidge
Fomon Upper Lateral Scissors
● 13.5cm/5¼" length
● Curved
PL2521-13
Fomon Dorsal Scissors
● 13cm/5" length
● Tungsten carbide edges
PL2531-13
Fomon Easy - Cut Dorsal Scissors
● 14.5cm/6" length
PL2530 -14
NASAL INSTRUMENTS
Cottle Dorsal Scissors
● 16cm/6¼" length
● Tungsten carbide edges
PL2541-16
Knight Nasal Scissors
● 18cm/7" length
● Tungsten carbide edges
PL2550 -18
Heymann Nasal Scissors
● 19cm/7½" length
PL2555 -18
Becker Septum Scissors
● 18cm/7" length
● Double action angled
● Serrated blades
PL2570 -18
Caplan Nasal Shears
● 20cm/8" length
● Double action angled
PL2560- 20
NASAL INSTRUMENTS
Joseph Button End Knife
● 14cm/5 ½" length
● Straight
PL5002 -14
Convese Button End Knife
● 16cm/6 ¾" length
● Curved
PL5003 -16
Freer Mucosa Knife
● 15cm/6 " length
PL5004 -15
Joseph Angled Button End Knife
● 17.5cm/7" length
PL5005 -17
Joseph Septum Knife
● 15cm/6 " length
● Double edge sharp
PL5006 -15 Straight
PL5007-15 Curved
NASAL INSTRUMENTS
Cottle Septum Elevator
● 20cm/8" length
● Double ended graduated
PL5010- 20
Masing Septum Elevator
● 20cm/8" length
PL5011- 20
Carter Septum Elevator
● 21cm/8¼" length
● Double ended with curette
PL5012- 21
Killian Septum Elevator
● 19cm/7 ½" length
● Double ended
PL5013 -19
Freer Hockey Stick Elevator
● 17.5cm/7" length
● Double ended
PL5014- 21
Joseph Septum Raspatory
● 17cm/6½" length
● Curved 2mm
PL5015 -17
Goldman Septum Elevator
● 20cm/8" length
● For straightening the nose
PL5016- 20
NASAL INSTRUMENTS
Kilner Alar Retractor
● 85mm length
Code Blunt Prongs
PL5085 -10 10mm
PL5085 -13 13mm
PL5085 -15 15mm
Cottle-Neivert Alar Retractor
● 2 prong blunt ball tips
● Knife guard
● 20cm/8" length
PL5021- 20 Fomon Alar Retractor
● 16cm/6¼" length
● 2 prong blunt ball tips
PL5022 -16
Fomon Alar Retractor Insulated
● 16cm/6¼" length
● 2 prong blunt ball tips
PL5022 -16 i
Cottle Hook
● 14cm/5½" length
● 2 prong blunt ball and sharp tips
Code Sharp Prongs
PL5086 -10 10mm
PL5086 -13 13mm
PL5086 -15 15mm
Sharp prongs
-14
PL5023
PL5024 -14
Ball on right
PL5025 -14
Ball on left
NASAL INSTRUMENTS
Cottle Alar Retractor Insulated
● 14cm/5½" length
● 12mm width
PL5026 -15 i
Cottle Alar Retractor
● 15cm/6" length
● 12mm width
PL5026 -15
Cottle Alar Retractor with lip
● 15cm/6" length
● 13mm width
PL5029 -15
Aufricht Nasal Retractor
● 16cm/6 ¼" length
● 45mm blade
PL5027 -16
Aufricht Nasal Retractor
● 16cm/6 ¼" length
● Fibre optic illumination
● 45mm blade
PL5028 -16
NASAL INSTRUMENTS
Hartmann- Halle Nasal Speculum
● 15cm/6" length
● Tapered blade
Code Blade length
PL5025- 30 30mm
PL5025- 33 33mm
PL5025- 37 37mm
Killian Nasal Speculum
● 13cm/5 " length
● Plain blade
Code Blade length
PL5035- 35 35mm
PL5035- 45 45mm
PL5035- 55 55mm
PL5035- 65 65mm
PL5035- 75 75mm
PL5035- 90 90mm
Cottle Nasal Speculum
● 14cm/5 ½" length
● Slender blade
Code Blade length
PL5045- 20 20mm
PL5045- 30 30mm
PL5045- 40 40mm
PL5045- 60 60mm
Thudichum Nasal Speculum
● 7cm/2¾" length
Code Blade length
PL5040 -12 12mm size 1
PL5040 -14 14mm size 2
PL5040 -16 16mm size 3
PL5040 -18 18mm size 4
PL5040- 20 20mm size 5
PL5040- 22 22mm size 6
PL5040- 24 24mm size 7
Complete set of 7
PL5040- 00
Insulated Thudichum Nasal Speculum
● 7cm/2¾" length
Code Blade length
PL5040- 12i 12mm size 1
PL5040- 14i 14mm size 2
PL5040 -16i 16mm size 3
PL5040 -18i 18mm size 4
PL5040 -20i 20mm size 5
PL5040- 22i 22mm size 6
PL5040- 24i 24mm size 7
Complete set of 7
PL5040- 00 i
Locking screw
Locking screw
NASAL INSTRUMENTS
Cottle Bone Crusher
● Complete with clamp
● For preparation of bone graft material
PL3100 -10
Plastic Plate for preparation of bone grafts
● 85mm x 55mm
PL3102 - 85
Gunter Septum Morselizer
● 18cm/7" length
● Tungsten jaws
PL5070 -18
Gorney Septum Morselizer
● 20cm/8" length
● Double action angled
● Tungsten jaws
PL5071- 20
Tolsdorf Bone Crusher
● 40mm diameter
● Inner serrated base
PL3101- 40
Sheen Cartilage Grid
PL3103- 00
Walsham Septum Straightening Forceps
● 23cm/9" length
Universal
PL5080- 23
PL5081- 23 Left
Asch Septum Straightening Forceps
● 23cm/9" length
PL5090- 23
PL5082- 23 Right
NASAL INSTRUMENTS
Joseph Nasal Saw
● 19cm/7" length
Surgical Instruments of Excellence
*illustrated
PL5030 -19 Straight
Joseph Nasal Saw
● Horizontal shaft
● 125mm x 85mm
Cranked right
PL5041-19
Cranked left
PL5042 -19
Ballenger Swivel Knife
● 19.5cm/7 ½" length
● Bayonet shaped
Code Width
PL5050 -19 3mm
PL5051-19 4mm
PL5052 -19 5mm
Cranked to right
PL5031-19
Cranked to left
PL5032 -19
*illustrated
Jansen Middleton Septum Forceps
● 19cm/7½" length
● Double action
PL5060 -19
NASAL INSTRUMENTS
Bohler Bone Cutters
● 15cm/6" length
● Double action
HA5160- 50
HA5161- 50
Kliener t- Kutz Bone Nibbler
● 14cm/4½" length
● Curved 2mm bite
HA5118- 50
Bohler Bone Nibbler
● 15cm/6" length
● Double action curved 3mm bite
HA5120- 50
Beyer Bone Nibbler
● 18cm/7" length
● Curved 4mm bite
SP1002 -18
Surgical Instruments of Excellence
NASAL INSTRUMENTS
Matthew Osteotome
● 18cm/7" length
● 11mm wide
● Bevelled at one corner
PL5120 -11
Rees Osteotome
● 18.5cm/7 ¼" length
● Aluminium handle
Code Size
PL5130- 02 2mm
PL5130 - 03 3mm
Rubin Osteotome
● 18cm/7" length
Code Size
PL5140- 08 8mm
PL5140 -10 10mm
PL5140 -12 12mm
PL5140 -14 14mm
PL5140 -16 16mm
Surgical Instruments of Excellence
French (Gillies) Osteotome
● 14cm/5½" length
Code Size
PL5150- 02 2mm
PL5150- 05 5mm
PL5150- 07 7mm
PL5150- 09 9mm
PL5150 -11 11mm
PL5150 -13 13mm
Cinelli Double Guarded Osteotome
● 16cm/6¼" length
Code Size
PL5160- 08 8mm
PL5160 -10 10mm
PL5160 -12 12mm
PL5160 -14 14mm
PL5160 -16 16mm
NASAL INSTRUMENTS
Jayes Osteotome
● 18cm/7" length
Code Size
PL5170- 02 2mm
PL5170- 04 4mm
PL5170- 05 5mm
PL5170- 06 6mm
PL5170- 08 8mm
PL5170 -10 10mm
PL5170 -12 12mm
Cottle Chisel
● 18.5cm/7½" length
Code Size
PL5180- 04 4mm
PL5180- 06 6mm
PL5180- 07 7mm
PL5180- 08 8mm
PL5180- 09 9mm
PL5180 -12 12mm
McIndoe Chisel
● 15cm/6" length
Code Size
PL5190- 09 9mm
PL5190 -11 11mm
PL5190 -13 13mm
PL5190 -15 15mm
Sheehan Osteotomes
● 15cm/6" length
HA5280- 28 Set of 5 sizes 2mm to 10mm
Code Size
HA5280 - 02 2mm
HA5280 - 04 4mm
HA5280 - 06 6mm
HA5280 - 08 8mm
HA5280 - 10 10mm
NASAL INSTRUMENTS
Braithwaite Chisel
● 14.5cm/5 ¾" length
● 5mm wide
Code
PL5210 -14 Without guard
PL5211-14 Guard on left
PL5212 -14 Guard on right
Walter Nasal Osteotome
● 19cm/7½" length
Code Size
PL5202 -19 2mm
PL5203 -19 3mm
PL5204 -19 4mm
PL5207-19 7mm
PL5209 -19 9mm
PL5212 -19 12mm
Silver Chisel with Guard (Frenchay)
● 18cm/7" length
Code
PL5230 -18 Straight
PL5231-18 Curved left
PL5232 -18 Curved right
Nievert Chisel with Guard
● 20cm/8" length
Code
PL5200- 20 Straight
PL5201- 20 Curved left
PL5202- 20 Curved right
Surgical Instruments of Excellence
Rubin T- Shaped Osteotome
● 18cm/7¼" length
Code Width
PL5145 -12 12mm
PL5145 -14 14mm
PL5145 -16 16mm
NASAL INSTRUMENTS
Toffee Mallet
● 19cm/7½" length
● Head size 22mm Ø
● Weight 165g/6oz
HA5808- 21
Read Nasal Gouge
● 18cm/7" length
Code Width
PL5100- 04 4mm
PL5100- 06 6mm
Killian Septum Gouge
Surgical Instruments of Excellence
● Round cutting edge 6mm width
● 16cm/6¼" length
● Bayonet shaped
PL5110- 06
● Notched cutting edge 6mm width
PL5111- 06
Obwegeser Nasal Septum Osteotome
● 18cm/7¼" length
● Graduated
Code Width
PL5112 - 04 4mm
PL5112 - 06 6mm
PL5112 - 08 8mm
NASAL INSTRUMENTS
Fomon Double Ended Nasal Rasp
● 21cm/8¼" length
● Tungsten carbide surface
Maltz (Parkes) Nasal Rasp
● 18cm/7" length
● Tungsten carbide surface
● Backward cutting
Maltz Nasal Rasp
● 18.5cm/7½" length
PL5800 -18
Maltz Nasal Rasp
● 18.5cm/7½" length
● Tungsten carbide surface
PL5801-18
NASAL INSTRUMENTS
Peet Nasal Rasp
● 19cm/7½" length
● Diamond surface
PL5810 -17
Curved tip*
PL5811-17 Straight tip
Aufricht (Peet) Nasal Rasp
● 22cm/8 ¾" length
● Diamond surface
PL5820- 22
Surgical Instruments of Excellence
*illustrated
Glabella Nasal Rasp
● 21cm/8¼" length
● Tungsten carbide surface
PL5830- 21
Fomon Double Ended Nasal Rasp
● 21cm/8¼" length
● Diamond surface
PL5840- 21
Miller Nasal Rasp
● 18cm/7" length
● Tungsten carbide surface
PL5850 -18
PL5855 -18
MAXILLO FACIAL INSTRUMENTS
Epkers Osteotome
● 18cm/7" length
Straight Code Width
PL5504 -18 4mm
PL5506 -18 6mm
PL5508 -18 8mm
● 17.5cm/6¾" length
Curved
Code Width
PL5604 -17 4mm
PL5606 -17 6mm
PL5608 -17 8mm
Tessier Multi-Purpose Osteotome
● 16cm/6¼" length
● Straight
● Flat handle
Code Width
PL5702 -16 2.5mm
PL5703 -16 3mm
PL5705 -16 5mm
PL5707-16 7mm
PL5710 -16 10mm
PL5715 -16 15mm
PL5718 -16 18mm
Obwegeser Pterygoid Osteotome
● 23.5cm/9" length
● Curved
Code Size
PL5108 - 23 8mm
PL5110 - 23 10mm
PL5111- 23 11mm
For mobilizing the maxilla during Le Fort Osteotomies.
Tessier Bone Graft Osteotome
● 16cm/6¼" length
Code Width
PL5910 -16 10mm Curved
PL5810 -16 10mm Straight
PL5915 -16 15mm Curved
PL5815 -16 15mm Straight
Specifically designed for taking bone grafts from the ribs or iliac crest.
MAXILLO FACIAL INSTRUMENTS
Obwegeser Splitting Osteotome
● 22cm/8¾" length
● Thin blade
Code Size
PL5208- 22 8mm
PL5212- 22 12mm
PL5216- 22 16mm
Surgical Instruments of Excellence
blade profile for sagittal split procedures.
Obwegeser- Ramus Wedge Osteotome
● 22cm/8¾" length
● Wedge profile
Code Size
PL5308- 22 8mm
PL5312- 22 12mm
PL5316- 22 16mm
Avoids the possible fracture of the buccal plate.
Ramus Split Osteotome Straight
● 22cm/8¾" length
● Thicker tapered blade
Code Size
PL5407- 22 7mm
PL5410- 22 10mm
Obwegeser Interdental Osteotome
● 15cm/6" length
Code Size
PL5802 - 15 2.5mm
PL5804 -15 4mm
PL5806 -15 6.5mm
Used to assist in interdental osteotomies. Prevents damage to roots of teeth.
Thin
MAXILLO FACIAL INSTRUMENTS
Ward Dental Chisel/Osteotome
● 18cm/7" length
Code Size
PL5903 - 18 3mm
PL5905 -18 5mm
Code Size
PL5913 - 18 3mm
PL5915 -18 5mm
Alveolectomy File
● 17cm/6½" length
PL8115- 05
Mini-Lambotte Osteotome
● 12.5cm/5" length
Width
HA5270- 02 2mm
HA5270- 03 3mm
HA5270- 04 4mm
HA5270 - 06 6mm
HA5270 - 08 8mm
Lambotte Osteotome
● 25cm/9¾" length
Straight Width
SP7970 - 04 4mm
SP7970 - 06 6mm
SP7970 - 08 8mm
SP7970 - 10 10mm
SP7970 - 13 13mm
SP7970 - 15 15mm
SP7970 - 18 18mm
SP7970 - 20 20mm
SP7970 - 25 25mm
SP7970 - 30 30mm
Chisel Osteotome
Set of 5 sizes: 2mm to 8mm
HA5270 - 28
Curved Width
SP7971- 04 4mm
SP7971- 06 6mm
SP7971- 08 8mm
SP7971- 10 10mm
SP7971- 13 13mm
SP7971- 15 15mm
SP7971- 18 18mm
SP7971- 20 20mm
SP7971- 25 25mm
SP7971- 30 30mm
Surgical Instruments of Excellence
MAXILLO FACIAL INSTRUMENTS
Obwegeser Periosteal Elevator
● 18cm/7" length
● Flat end sharp
PL6007-18 7mm width
PL6009 -18 9mm width
PL6011-18 11mm width
Obwegeser Mandibular Border Stripper
● 20cm/8" length
● Sharp
PL6105- 20 5mm width
PL6107- 20 7mm width
PL6109- 20 9mm width
Obwegeser/ Freer Elevator
● 22cm/8¾" length
● 6mm blunt
● Double ended
PL6106- 22
Rowe Zygoma Elevator
● 25cm/9¾" length
● Blunt
Surgical Instruments of Excellence
Used to remove the periosteum from the posterior and anterior borders of the mandible.
PL6200- 25
Ward Periosteal Elevator - Fan Shaped
● 17cm/6½" length
● Fan shaped
PL6110 -17
MAXILLO FACIAL INSTRUMENTS
Smith Ramus Separator
● 23cm/9" length
● 12mm width
PL6005- 23
Surgical Instruments of Excellence
The superior ramus separator in conjunction with the sagittal split separator allows controlled separation of the superior ramus osteotomy cut. It's unique blade action exerts force over a broad surface area for maximum control. This instrument is also useful in "down facturing" the maxilla by placement at the zygomatic butress osteotomy cut.
Marchac Bone Spreader
● 17cm/6¾" length
● 7mm width
● Serrated jaws
PL6007-17
Tapered tips to facilitate placement into narrow spaces.
Tessier Retromaxillary Levers
● 15cm/6" length
● 10mm width
PL6011-15 Left side*
PL6012 -15 Right side
Tessier (Marchal) Bone Bending Forceps
● 18.5cm/7¼" length
● Parallel Grooved Jaws
● Concave jaws
PL6008 -18
Used for bending bone grafts
*illustrated
To rotate and advance the maxilla or midface. Used in Le Fort procedures. The thin blade allows access below the Zygomatic Bone.
MAXILLO FACIAL INSTRUMENTS
Tessier- Rowe Disimpaction Forceps
Surgical Instruments of Excellence
*Left version illustrated
These instruments are used for maxillary advancement in Le Fort I, II, or III prodecures.
A Large curvature of the blade prevents damage of the teeth. The oral blades are asymmetrical to adapt to the curvature of the palate which is often high and concave.
Nasal blade Oral blade
Tessier- Rowe Left*
● 23cm/9" length
PL6003- 23
Tessier- Rowe Right
● 23cm/9" length
PL6004- 23
Tessier Bone Holding Forceps
● 20cm/8" length
● Heavy teeth
PL6010- 20
For holding bone grafts securely whilst shaping
40mm
Nasal blade
Oral blade
MAXILLO FACIAL INSTRUMENTS
Obwegeser Ramus Forked Retractor
● 22cm/8¾" length
● Width 11mm
PL6511- 22
Surgical Instruments of Excellence
Obwegeser Soft Tissue Retractor
● 22cm/8¾" length
● Concaved blade
● Curved down
Code Length Width
PL6535- 22 35mm 10mm
PL6542- 22 42mm 10mm
PL6555- 22 55mm 12mm
PL6570- 22 70mm 14mm
PL6580- 22 80mm 16mm
Genioplasty Chin Retractor
● 16cm/6¼" length
● Blade 15mm width x 48mm length
PL6548 -16
Prognathism Channel Retractor
● 17cm/7" length
Code
PL6508 -17 8mm width*
PL6510 -17 10mm width
Used in genioplasty procedures, positioned under the chin to retract the soft tissue.
For placement on the lingual side of the mandible.
MAXILLO FACIAL INSTRUMENTS
Minnesota Cheek Retractor
● 16cm/6½" length
● Double ended with tongue depressor
PL6501-16
Ward Cheek Retractor
● 15cm/6" length
● Double ended
PL6502 -15
Bowdler- Henry Rake Retractor
● 19cm/7½" length
PL6503 -19
Kilner Cheek Retractor
● Double ended Code Size Width
PL6525 -19 Small 25mm x 19mm
PL6535- 30 Large 35mm x 30mm
Insulated
PL6530- 28i - 30mm x 28mm
Lasters Cheek Retractor
● 10cm/4" length
PL6500 -10
MAXILLO FACIAL INSTRUMENTS
Davis Boyle Mouth Gag
Code
PL6601- 00 Adult
PL6601- 01 Child
Plain Tongue Plates
● Frame only Length
PL6601- 65 65mm
PL6601-75 75mm
PL6601- 90 90mm
PL6601-10 100mm
PL6601-15 115mm
Slotted Tongue Plates
Fergusson Mouth Gag Adult
● 20cm/8" length
● With Ackland jaws
PL7200 -20
Set of 3 sizes
PL7300- 00
PL6602- 65 65mm
PL6602-75 75mm
PL6602- 90 90mm
PL6602-10 100mm
PL6602-15 115mm
McKesson Rubber Mouth Props Small
MAXILLO FACIAL INSTRUMENTS
Lacks Tongue Depressor Code
PL6700 -12 Child 12mm width
PL6700 -19 Adolescent 19mm width
PL6700 -22 Adult 22mm width
Fickling Oral Forceps
● 18cm/7" length
PL3216 -18
Toothed jaws
PL3215 -18 Serrated jaws
Coupland Osseus Chisel
● 16cm/6¼" length
PL5101-16 3mm tip
tip
-16
tip
-16
Warwick James Elevator
● 16cm/6¼" length
PL5104 -16 Straight
PL5105 -16 Left
Dental Cartridge Syringe
● 17.5cm/7" length
● 2.2cc capacity
PL7111- 22
PL5106 -16 Right
WIRING INSTRUMENTS
Kelsey Fry Bone Awl
● 15cm/6" length
● With eye
Curved
PL3901-15
Alveolar-Pernasal Bone Awl
● 22.5cm/8¾" length
● Curved with eye
PL3903- 22
Obwegeser Mandibular Bone Awl
● 18cm/7" length
● Curved with eye
PL3904 -18
For upper jaw.
PL3902 -15
For zygomatic arch.
Universal Wire Cutting Scissors
● 13.5cm/5¼" length
● Tungsten Carbide edges
9 -105 -13
Lawson Tait Wire Forceps
● 14cm/5½" length
PL3905 -14
WIRING INSTRUMENTS
Universal Fine Pliers and Cutters (Dolphin Nose)
● 15cm/6" length
Muller Claus Wire Pullers
● 18cm/7" length
● Double action
● Tungsten jaws
8- 818E 18 2mm Jaws
SP7640 -15 Fine Medium
8- 820E 18 4mm Jaws 8- 821E 18 6mm Jaws
Muller Claus Wire Cutters
● 16cm/6" length
● Tungsten carbide edges
● Cuts wire up to 1.6mm Ø
8- 810E16
Muller Claus Wire Cutters
● Tungsten carbide edges
8- 810E18
● 18cm/7" length*
● Cuts wire up to 2mm Ø
8- 800E22
● 22cm/8¾" length
● Cuts wire up to 3mm Ø *illustrated
MICRO VESSEL DILATORS
Vessel Dilator Angled
● 11cm/4¼" length
D- 5a.1 Tips 0.1mm Ø super fine
D- 5a.2 Tips 0.2mm Ø
D- 5a.3
Vessel Dilator
● 13.5cm/53⁄8 " length
JFS- 3d.2
Straight tips 0.2mm Ø
JFL- 3d.3 Straight tips 0.3mm Ø
JFL- 3d.2 Straight tips 0.2mm Ø
JFCL- 3d.2
JFAL- 3d.3 Angled tips 0.3mm Ø
Vessel Dilator Long
● 18cm/7" length
JF -3 -18d.3
Surgical Instruments of Excellence
Mercian Vessel Dilators have polished tips for interluminal vessel dilation. The entire area is opened to the same diameter and the pressure is distributed evenly.
Curved tips 0.2mm Ø Straight Tips 0.3mm Ø
JF -3 -18d.2 Straight Tips 0.2mm Ø
JFCL-3 -18d.2 Tips 0.3mm Ø
Curved Tips 0.2mm Ø
7mm handle width.
9mm handle width.
MICRO VESSEL DILATORS
Round Bodied Vessel Dilator
● 15cm/6" length
● Straight tips
● Balanced forceps
FRS -15 RM- 8d.1 Tips 0.1mm Ø super fine
FRS -15 RM- 8d.3
Tips 0.3mm Ø
Surgical Instruments of Excellence
Weighted distal end perfectly balances forceps in the hand.
Round Bodied Vessel Dilator
● 15cm/6" length
● Curved tips
● Balanced forceps
FRC -15 RM- 8d.2
Tips 0.2mm Ø
Round Bodied Vessel Dilator
● 18cm/7" length
● Balanced forceps
FRS -18 RM- 8d.1 Tips 0.1mm Ø super fine
FRS -18 RM- 8d.2 Tips 0.2mm Ø
FRS -18 RM- 8d.3 Tips 0.3mm Ø
Round Bodied Vessel Dilator
● 18cm/7" length
● Curved tips
● Balanced forceps
FRC -18 RM- 8d.2
Tips 0.2mm Ø
MICRO FORCEPS
Jewellers Forceps No.5
● 11cm/4¼" length
JF- 5 Tips 0.3mm Ø
JF- 5.1 Tips 0.1mm Ø super fine
Jewellers Forceps Long
● 15cm/6" length
MV2505 -15
Tips 0.3mm Ø
Jewellers Forceps
● 12cm/4¾" length
JF- 3 Tips 0.3mm Ø
Jewellers Forceps
● 13.5cm/5³⁄8" length
JF L- 3
JF L- 3.1
Tips 0.3mm Ø
Tips 0.1mm Ø super fine
Pierse Forceps
● 12cm/4¾" length
JFP- 3
Tips 0.3mm Ø
Micro Adson Fixation Forceps
● 12cm/4¾" length
● 1x 2 micro teeth
FF -1
Tips 0.3mm Ø
Surgical Instruments of Excellence
Pierse Forceps have a micro hole in the tips which securely grip tissue with minimal trauma.
Micro Toothed Platform Forceps
● 15cm/6" length
● 1x 2 micro teeth
MV2104 -15T Straight
MICRO FORCEPS
Round Bodied Platform Forceps
● 15cm/6" length
● Balanced forceps
FRS -15 RM8 Straight tips 0.3mm Ø
Surgical
Weighted distal end perfectly balances forceps in the hand.
FRS -15 RM8 1 Straight tips 0.1mm Ø super fine
FRC -15 RM8
Curved tips 0.3mm Ø
Platform tips guarantee parallel closure of the tips to allow secure grip on needle.
Round Bodied Platform Forceps
● 18cm/7" length
● Balanced forceps
FRS -18 RM8 Straight tips 0.5mm Ø
FRC -18 RM8 Curved tips 0.5mm Ø
Sorensen Angled Forceps
● Angled tips
● Balanced forceps
FRAS -15 RM- 8 15cm/6" length, tips 0.2mm Ø
FRAS -18 RM8 18cm/8" length, tips 0.2mm Ø
Angled tips are ideal for use as tying forceps, needle holders and used with the vessel coupler.
SAS -18 R8 Length 15cm/6" 18cm/7" 12mm* 14mm Blade
Curved Scissors Round Handle
Dissecting scissors with rounded tips
*illustrated
SDC -15 R8
SDC -18 R8 Length 15cm/6"* 18cm/7" 12mm 14mm
Super Fine Straight Scissors Round Handle
Adventitia scissors with pointed tips
SAS -15R - 8F14
SAS -18R - 8F14 Length 15cm/6"* 18cm/7" 14mm 14mm
Super Fine Curved Scissors Round Handle
Dissecting scissors with rounded tips *illustrated
Blade length Code
SDC -15R - 8F12
SDC -18R - 8F12 Length 15cm/6"* 18cm/7" 12mm 12mm
MICRO SCISSORS
Blondeel Scissors Round Handle
● Curved blades
These scissors were designed by professor Phillip Blondeel for use in breast reconstruction utilising a perforator flap. A combination of ring handle design for preparation of fine structures, the round handle micro instrument handle allows the user to perform fine micro surgery.
● Straight 1.2mm jaws suitable for 7/0 and 8/0 sutures
With lock
14cm/5½" 18cm/7"
21cm/8¼" 23cm/9"
Serrated jaws
MV1003 -14
MV1003 -18
MV1003- 21
MV1003- 23
Smooth jaws
MV1003 -14S
MV1003 -18S
MV1003- 21S
MV1003- 23S
Without lock
14cm/5½" 18cm/7" 21cm/8¼" 23cm/9"
Serrated jaws
MV1103 -14
MV1103 -18
MV1103- 21
MV1103- 23
MV1103 -14S
MV1103 -18S
MV1103- 21S
MV1103- 23S Smooth jaws
MICRO NEEDLE HOLDERS
Barraquer Micro Needle Holder
● Round bodied
● 0.4mm jaws suitable for 8/0 or finer sutures
13cm/5" 15cm/6" 18cm/7"
BS -13- 8
BS -15- 8
BS -18- 8 B -13- 8 B -15- 8* B -18- 8
Super Fine Barraquer Micro Needle Holder
● Round bodied
● 0.2mm jaws
● Curved
● Suitable for 10/0 and 11/0 sutures
Without Lock Curved
15cm/6" 18cm/7"
B -15- 8.2 B -18- 8.2
0.2mm jaws
Double Action Micro Needle Holder
● Round bodied
● 0.4mm jaws
● Ideal for confined access
● Suitable for 8/0 and 9/0 sutures
Double action allows a reduced opening of the handle.
Weighted distal end perfectly balances needle holder in the hand.
Without Lock Curved
15cm/6" 18cm/7"
NH -15 RM- 8
NH -18 RM- 8
ACLAND® MICRO CLAMPS
● Light and compact design
● Extremely durable
● A unique gripping surface
● Matt or black finish
● Smooth sliding bar action on all approximator clamps
● Clamp profile with parallel sided jaws
Ordering details:
“A” or “V” Pattern?
The “V” pattern is the all-purpose clamp, used on all veins, and almost all arteries. The “A” pattern, available in all sizes, is designed for exceptionally thick-walled vessels and slippery arteries. The slight incurve of the tips of the “A” pattern jaw provides extra security against slippage.
CLAMPS - packed in pairs
V
A
V
A
V
A
V
A
V
A
V
A
SINGLE
Matt Black Clamp Vessel Clamping code code size size force
ACLAND® MICRO CLAMPS
Ordering details:
DOUBLE CLAMPS WITH FRAME - frames are used to tie sutures onto during anastomosis
Ordering details:
Matt Black Clamp Vessel Clamping code code
V 00409 A
V 00411 A
V 00413 A
V 00473 A
V 00475 A
V 00477 A
DOUBLE APPROXIMATING CLAMPS - used for end to end anastomosis on small vessels
Matt Black Clamp Vessel Clamping code code size size force
V 00415 A
V
V 00419 A
V 00479 A
V 00481 A
V 00483 A
ACLAND® MICRO CLAMPS
Acland Clamp Applicator Forceps
● 14cm/7" length
CAF - 4 Forceps for smaller sizes of the Acland Clamps: B -1 to B- 3
CAF - 5 Forceps for larger sizes of the Acland Clamps: HD- S & RD- S
Acland Clamp Container
MV4400- 00
With individual compartments for various clamp sizes
Clamp Box
CB -1
MICRO VESSEL CLAMPS
The Biover ® microvascular clamp is a high precision instrument and has been developed under the guidance of international surgeons.
● Four sizes available for veins & three sizes for arterys
● Latex Free and Radiolucent
VEIN CLAMPS
Single Vein Clamps
TKFV -1
Clamping Force 15g/mm²
Double Approximating Clamps
TKFV - 2
Clamping Force 15g/mm²
For vessels between 0.2mm to 1mm Ø
TKSV -1
Clamping Force
20g/mm²
TKMV -1
Clamping Force
30g/mm²
TKSV - 2
Clamping Force 20g/mm²
For vessels less than 1mm Ø
TKMV - 2
Clamping Force 30g/mm²
For vessels between 1mm to 2mm Ø
TKLV -1
Clamping Force 40g/mm²
TKLV - 2
Clamping Force 40g/mm²
For vessels over 2mm Ø
● Exact pressure every use
● Supplied in boxes of 10
● Each box easily identified by a different colour
ARTERIAL CLAMPS
Single Artery Clamps Double Approximating Clamps
TKS -1
Clamping Force 40g/mm²
TKM -1
Clamping Force 60g/mm²
TKS- 2
Clamping Force 40g/mm²
For vessels less than 1mm Ø
TKL- 1
Clamping Force 120g/mm²
TKM- 2
Clamping Force 60g/mm²
For vessels between 1mm to 2mm Ø
TKL- 2
Clamping Force 120g/mm²
For vessels between 2mm to 4mm Ø
10 clamps per box
MINI BULLDOG VESSEL CLAMPS
Low Closing Pressure for Veins 110gr marked with V High Closing Pressure for Arteries 220gr marked with A
Titanium Mini Glover Bulldog Clamps
● Straight
● Weight 0.8gr
Overall length Jaw length Vein
MV4009- 30T 30mm 11mm
Low Closing Pressure
Arterial
MV4010- 30T
High Closing Pressure
MV4009- 35T 35mm 15mm
MV4010- 35T
Titanium Mini Glover Bulldog Clamps
● Shallow curved
● Weight 0.8gr
Overall length Jaw length
Vein
MV4011- 30T 30mm 11mm
Low Closing Pressure
Arterial
MV4012- 30T
High Closing Pressure
MV4009- 40T 40mm 17mm
MV4010- 40T
MV4011- 35T 35mm 15mm
MV4012- 35T
Titanium Mini Glover Bulldog Clamps
● Strongly curved
● Weight 0.8gr
MV4009- 55T 55mm 24mm
MV4010- 55T
MV4011- 40T 40mm 17mm
MV4012- 40T
MV4011- 55T 55mm 24mm
MV4012- 55T
Overall length Jaw length
MV4013- 30T 30mm 11mm
Low Closing Pressure
Arterial
High Closing Pressure Vein
MV4014- 30T
MV4013- 35T 35mm 15mm
MV4013- 40T 40mm 17mm
MV4013- 55T 55mm 24mm
MV4014- 35T
MV4014- 40T
MV4014- 55T
INSTRUMENT CONTAINERS
SINGLE TRAY CONTAINERSc
Internal Dimensions Code
B C
200 x 140 x 50mm
280 x 195 x 50mm
265 x 255 x 50mm
380 x 260 x 50mm
470 x 250 x 50mm
MV4026- 01
MV4026- 04
MV4026- 05
MV4026- 07
MV4026 -10
DOUBLE TRAY CONTAINERS
Internal Dimensions Code
B C
280 x 195 x 65mm
265 x 255 x 65mm
380 x 260 x 65mm
MV4026- 04D
MV4026- 05D
MV4026- 07D
SINGLE TRAY BASKETSc
DOUBLE TRAY BASKETS
VISIBILITY BACKGROUND MATERIAL
TO ASSIST IN VISUALISING MICRO VESSELS DURING ANASTOMOSIS
Description: Silicon strip with 1mm grid on one side and plain on reverse side, available in blue, green and yellow colours. Packed in boxes of 12 pieces.
Application: For use in micro surgical anastomosis of micro vessels under a microscope to allow the surgeon to better visualise the detail of the vessels, being joined.
The Visibility Material can be used either with the grid side up to give the surgeon a scale of the vessel, alternatively the reverse plain side can also be used.
Th e materia l ha s a non e reflectiv e surfac e eliminating distractions from theatre lighting and has a non-tacky finish to aid mobilisation of the Vessel.
Ordering details:
Supplied sterile in boxes of 12 pieces
1mm grid one side and matt finish on reverse. Size: 50mm x 25mm
● X- Ray opaque silicon material
● 1mm grid for accurate measurement of vessels
● Latex free material
● Sterile packed in boxes of 12
● Optimal colours to improve visibility of vessel and reduce eye fatigue
BASIC MICRO INSTRUMENT SET
Mercian offer a Basic Micro Surgery Instrument Set, equiping the surgeon with the basic Instruments for most micro surgery procedures.
This suggested set includes a comprehensive set of micro instruments to provide all options for complex micro reconstructive surgery procedures. The set includes variations on lengths and tip sizes and styles. Sorenson Angled Forceps are included for use with the coupler.
The Acland vessel clamps are offered in both aterial and venous sizes, covering the full span of vessel diameters.
Mercian Extended Micro Instrument Set
EMS -1
Complete set
Set consisting of the following instruments:
Qty
Order code
1 MV4026 -10
Micro Scissors
1 SAS -15R8
1 SDC -15R8
Description
Micro Instrument Container
Micro Scissors R/B, 15cm straight
Micro Scissors R/B, 15cm curved
1 SAS -18R8 Longer Micro Scissors R/Bodied, 18cm straight
This suggested set includes a set of micro instruments in a longer 18cm length, to provide an option for the deeper micro reconstructive surgery procedures.
The set includes all our most popular instruments, together with the 3 most popular middle sizes of our Acland vessel clamps regularly selected.
Mercian Long Micro Instrument Set
BMS -1L
Set consisting of the following instruments: Complete set
Qty
Order code Description
1 MV4026- 05
Micro Scissors
Micro Instrument Container
Surgical Instruments of Excellence
1 SAS -18R 8 Long Micro Scissors R/Bodied, 18cm straight
1 SDC -18R 8 Long Micro Scissors R/Bodied, 18cm curved
This suggested set includes our superfine 0.1mm tip diameter dilators and micro forceps, designed to be used on extremely small vessels during Lymphoedema surgery. The needle holders included, feature very fine 0.2mm jaws to hold the fine 11/0 & 12/0 micro needles, for use on the smallest vessels less than 1mm in diameter.
HA5808 -21 Toffee Hammer Extended Hand Set includes the above plus the following instruments:
EA7643 -13 Jameson-Werber Scissors Curved 5¼"
70- 02- 41 Bipolar Forceps 4"
- 50 Bohler Bone Nibbler Curved
50 Bohler Bone Cutter Angled
8- 818 E -18 Muller-Claus Wire Twisters
-11 Carroll Tendon Forceps
HA5254 -15 Tendon Braiding Forceps Straight
HA5255 -15 Tendon Braiding Forceps Curved
TENDON INSTRUMENTS
Tendon Interlacing Forceps
● 15cm/6" length
Straight Curved
HA5254 -15
HA5255 -15
Carroll Tendon Retriever
● 11cm/4¼" length
● Curved
HA5679 -11
The pointed tip seperates the tendon without causing splits. The jaws grasp and secure a tendon stump pulling it back through the tendon body.
Kleinert-Kutz Tendon Retriever
● 21cm/8¼" length
● 2mm jaws
● Flexible shaft
HA5814- 02
1 x 2 Teeth
Anderson-Brand Tendon Retriever
15cm/6”
HA5810 -15 Straight
HA5811-15 Curved
20cm/8”
HA5810 -20 Straight
HA5811-20 Curved
TENDON INSTRUMENTS
Meyer Nerve/Tendon Holding & Trimming Instrument Set
NHS -1
Set of Six Forceps with Container and Blade Holders. CBS - 35 Box of Blades to fit Blade Holder. Set
-12 Blade Holder
1 ICN - 913 Sterilization Rack Holding Forceps
Sterile Blades ● Box of 12 straight blades CBS- 35
This set was developed to allow the surgeon to hold securely and trim the nerve ends with the correct size holding forceps avoiding trauma to the nerve. There is minimal loss of nerve end with this technique.
Blade Holder
-12
BHS
BHS
HAND RETRACTOR
Tuppers Hand Retractor Set
Complete Set in wire basket
HA5100- 00
Tuppers Universal Hand Holder and Retractor Set enables the surgeon to fixate the hand in any position needed.
The patient’s hand is held absolutely firm and allows unhindered work under the microscope.
Ball chains of varying length with skin or tendon hooks fixate the hand and lower arm on the Hand Holder.
Due to the slots around the Hand Holder, retraction in every direction is possible.
Upward retraction is easily achieved with the elevated chain holders.
The wire basket is designed for easy handling and safe storage.
consisting of the following instruments:
DIGIBAND DIGITAL TOURNIQUET
Information on application;
The Digiband digital tourniquet is manufactured from medical grade silicone, with excellent physical properties. It exceeds ISO 10993 standards for sensitivity and dermal irritation. It has a tensile strength 7.0 Nmm-2 min, with an elongation of 400%. It cannot be over-tightened yet effectively produces ischaemia and a bloodless field.
The strip is 10mm wide presenting a broad flat area of pressure and reducing damaging peak pressure. The material cannot roll reducing the surface area. The material is brightly coloured and the time of application can be easily written and recorded on the tourniquet.
The strip does not need to be rolled over the injury site thus avoiding further injury.
The release of the clip automatically loosens the tourniquet even if the strip itself is left in situ. The use of a clip automatically includes the tourniquet into the “count” though the tourniquet itself should also be “counted” and the time of application and removal noted on the records and operation notes. The tourniquet is low profile and unobtrusive avoiding interference with the surgical field.
The Acland-Banis Arteriotomy Clamp was developed to ovecome the difficulties of creating a hole in the side of a vessel, in an end - to - side anastomosis. The device enables the surgeon to make an arteriotomy with an instrument that cuts the vessel the best -- a knife. The arteriotomy clamp picks up and holds the piece of the vessel wall that is to be excised. Then, with a single curving sweep of a straight blade that is held close against the clamp tip, the ellipse is excised. The result is a perfect arteriotomy, every time.
The clamp is a precision- made, cross - action forceps with a heavy closing pressure and a tapered, rounded, fenestrated tip. The hole in the tip is important because the tissue that is picked up can squeeze into it and be held firmly. There are three sizes of clamps, with tips 1.2, 1.8 and 2.4mm in diameter. Each clamp can cut a different size hole, depending on the depth of the tissue being picked up. Using the set of three clamps, holes can be cut with mean diameter ranging from 1 to 5mm.
USING THE CLAMP
1. Mobilise the vessel so that it can be rotated freely.
2. Apply occluding clamps, keeping the vessel at its natural state of resting tension.
3. Empty the occluded segment by finger pressure while momentarily releasing one clamp.
4. Remove adventitia thoroughly and widely around the planned arteriotomy site.
5. Rotate the vessel so that the site of arteriotomy is seen in clear profile.
6. Have the small vessel in view, with its end prepared and dilated, in order to judge its size.
7. With an arteriotomy clamp of appropriate size, carefully pick up a piece of vessel wall which is half as long and just as wide as the desired arteriotomy.
Note that because of the pressure which the tip of the clamp exerts, this step is irreversible.
8. With a CBS-35 blade held in metal - to- metal contact with the clamp tip, cut around the tip with a steady sweeping action.
Important!
With practiced use, the size of arteriotomy results is highly predictable. However, we strongly recommend a brief initial practice period on animal or fresh cadaver vessels. These vessels should be stretched out to their natural length and tension to simulate real conditions. Remember that the arteriotomy will be twice as long and just as wide as the piece which is picked up and excised.
Arteriotomy Clamp
● Hole size in the tip 1.2mm Ø
ART -12
Arteriotomy Clamp
● Hole size in the tip 1.8mm Ø
ART -18
Arteriotomy Clamp
● Hole size in the tip 2.4mm Ø
ART - 24
LUX SUTURES
Micro sutures are designed for easy penetration into vessels and nerves.
Robust enough to withstand repeated penetrations without any unnecessary deterioration of the point. The point design will enter tissues with the least amount of disturbance of neighbouring tissues, supporting fast wound healing.
● Available in sizes 8/0, 9/0,10/0 & 11/0
● 3/8 Taper point needle
Ordering details:
● Sterile packed in boxes of 12
● Nylon thread
Taper point needle precision point honed under the microscope.
3/8 Circle.
MICRO TORQUE SURGICAL DRILL
The MT5000 Micro Torque Surgical Drill is a multi speciality system, equipped with a state of the art powerful micro motor which is reliable and compatible with current handpieces.
The variation of handpieces available are ideally suited to Maxillo Facial and ENT Surgery.
The precisely controlled Irrigation System irrigates to optimise cutting efficiency.
Controlled Irrigation allows simple set up with lower settings for ENT Surgery
● Autoclavable micro motor
● Irrigation system
● Digital display
● Programmable settings
● Full handpiece range
Programmable Micro Motor Speed up to 40,000 RPM
Controlled Irrigation Flow up to 100 ml per minute
Forward & Reverse
Surgical Instruments of Excellence
Mobile stand with draw
Autoclavable Micro Motor self cooling, max 40,000 RPM
MT5017- 00
MICRO TORQUE SURGICAL DRILL
Straight Handpiece
● 1:1 Transmission
● For 44mm & 50mm Burs
● Max speed 40,000 RPM
MT1124 - 00
Straight Handpiece
● 1:1 Transmission
● For 70mm Burs
● Max speed 40,000 RPM
MT1125- 00
COMPONENTS
MICRO TORQUE
MT5000 ELECTRONIC CONSOLE
The electronic console allows the user to select the optimum speed required also the irrigation flow. There is also the possibility of selecting forward & reverse.
MT5010- 00
Angled Handpiece
● 1:1 Transmission
● For 70mm Burs
● Max speed 40,000 RPM
MT1126- 00
FOOTSWITCH CONTROL
A foot pedal allows the constant control over the speed range of the micro motor. From the foot pedal you can also switch the irrigation on/off and switch the micro motor into forward or reverse.
MT5011- 00
IRRIGATION PUMP
The irrigation system is easy to set up and precisely controllable. The rotary pump runs in sync with the micro motor.
Lower settings for E.N.T. Surgery allows a fine flow of irrigation onto the Bur.
MT5018 - 00
Surgical Instruments of Excellence
Angled Long Handpiece
● 1:1 Transmission
● For 95mm Burs
● Max speed 40,000 RPM
MT1127- 00
MICRO MOTOR CABLE
The sterilizable micro motor is a high performance self cooling micro motor. Brushless with a variable speed range from 500 to 40,000 RPM.
MT5012 - 00
ORAL SURGERY BURS
Toller Round Head Bur
● Tungsten Carbide with blood ring
● ISO standard 2.35mm Ø shaft
SB0144 - 23
- 23 1/1
Round Head Bur
● Tungsten Carbide
● ISO standard 2.35mm Ø shaft
Sterile Irrigation Tubing
MT5243- 00
Sterile packed in boxes of 10
Sterile packed in boxes of 10
*Only available in Stainless Steel
Sterile packed in boxes of 10
ORAL SURGERY BURS
Toller Tapered Fissure Bur
● Tungsten Carbide cross cut with Blood Ring
● ISO standard 2.35mm Ø shaft
1/1
Length Head
Sterile packed in boxes of 10
Tapered Fissure Bur
● Tungsten Carbide
● 44mm length
● Cross cut
● ISO standard 2.35mm Ø shaft
1/1
Flat Fissure Bur
● Stainless steel
● 44mm length
● Cross cut
● ISO standard 2.35mm Ø shaft
1/1
Surgical Instruments of Excellence
Tapered Fissure Bur - Thicker Neck
● Tungsten Carbide
● 50mm length
● Cross cut 1/1
- 16
Sterile packed in boxes of 10
Sterile packed in boxes of 10
Sterile packed in boxes of 10
ORAL SURGERY BURS
Apicectomy Bur
● Tungsten Carbide
● 44mm length
● Stainless steel
● ISO standard 2.35mm Ø shaft
Surgical Instruments of Excellence
Bud Trimmer Bur
● Cross cut
Head size
Code No. 0.8mm
SB1244- 08
Sterile packed in boxes of 10 1/1
Dermabrasion Cone Bur
● 44mm length
● Stainless steel Used in skin resurfacing procedures
Head size
Code No. 7.0mm SB1644- 70
Sterile packed in boxes of 5 1/1
Useful for trimming off bone
Lindemann Side Cutting Burs
Head size
44mm length Code No. 70mm length Code No. 6mm
SB0544 - 50 SB0570- 50
SB0544 - 60 SB0570- 60
50mm sterile packed in boxes of 10 70mm sterile packed in boxes of 5 5mm
Sterile packed in boxes of 5
ENT SURGERY BURS
ENT Rosen Cutting Bur
● 70mm length
● Stainless steel
1/1
ENT Diamond Polishing Bur
● 70mm length
1/1
Sterile packed in boxes of 5
Sterile packed in boxes of
KIRSCHNER WIRES
● Stainless steel
● Supplied sterile in boxes of 10
● 5 year shelf life
Single Ended
Ø 0.9mm
Trocar point
Trocar point
150mm/6"
KW6150- 09
Ø 1.0mm KW6150 -10
Ø 1.1mm KW6150 -11
Ø 1.2mm KW6150 -12
Ø 1.4mm KW6150 -14
Ø 1.6mm KW6150 -16
Ø 1.8mm KW6150 -18
Ø 2.0mm KW6150- 20
K-Wires are drilled into bone to stabilise fractures or bone fragments on small bones.
Wires are removed after the Bone is stabilised for healing to occur.
Our K-Wires are presented sterile packed with a 5 year shelf life in a convenient blister pack.
Offered in either single or doubled ended version with a variation in diameters.
Traceability labels are provided to accompany each wire.
Double Ended
Ø 0.7mm
150mm/6"
KW7150- 07
Ø 0.8mm KW7150- 08
Ø 0.9mm KW7150- 09
Ø 1.0mm KW7150 -10
Ø 1.1mm KW7150 -11
Ø 1.2mm KW7150 -12
Ø 1.3mm KW7150 -13
Ø 1.4mm KW7150 -14
Ø 1.6mm KW7150 -16
Ø 1.8mm KW7150 -18
Ø 2.0mm KW7150- 20
TWIST DRILLS
Round Fitting Twist Drill
● Stainless steel
● Supplied sterile in boxes of 10
● 5 year shelf life
Code Diameter
TD1070 -15 1.5mm Ø 70mm 30mm
TD1085- 20 2.0mm Ø 85mm 38mm
TD1095 - 25 2.5mm Ø 95mm 43mm
TD1195 - 25 2.5mm Ø 195mm 50mm
TD1095- 35 3.5mm Ø 95mm 42mm
TD1195- 35 3.5mm Ø 195mm 50mm
Used in the placement of Bone Screws during Orthopaedic Surgery for internal or enteral fixation.
Our Twist Drills create precise holes in bone to allow secure fixation of bone plates.
We offer both AO Quick coupling shank fitting and plain shank fitting in a variety of diameters and lengths. Presented sterile packed in a convenient blister pack.
A O Fitting Twist Drill
● Stainless steel
● Supplied sterile in boxes of 10
Code Diameter Length
TD2060 -11 1.1mm Ø 60mm 12mm
TD2085 -15 1.5mm Ø 85mm 18mm
TD2100- 20 2.0mm Ø 100mm 20mm
TD2110- 20 2.0mm Ø 110mm 32mm
TD2110 - 25 2.5mm Ø 110mm 32mm
TD2100- 27 2.7mm Ø 100mm 30mm
TD2145- 32 3.2mm Ø 145mm 43mm
TD2195- 32 3.2mm Ø 195mm 50mm
TD2110- 35 3.5mm Ø 110mm 40mm
TD2195- 35 3.5mm Ø 195mm 50mm
TD2145- 45 4.5mm Ø 145mm 50mm
TD2195- 45 4.5mm Ø 195mm 50mm
Flute
Flute
Surgical Instruments of Excellence
Jacob chuck fitting Diameter
Length
AO quick coupling fitting Diameter Length
SURGEONS OPERATING STOOLS
Backrest
Foot plate for height adjustment
Adjustable Armrest
The Severn Operating Stool with Backrest
● Comfortable Surgeon’s seat
● 5 anti-static castors
● Height adjustment with foot plate, height range 55cm to 78cm
GS3221- 67
Urology version with Backrest
● Lower height range 48cm to 67cm
GS3221- 57
Foot plate for height adjustment
The Avon Operating Stool without Backrest
GS3221- 65
Urology version without Backrest
● Lower height range 48cm to 67cm
GS3221- 55
Trent Gas Operated Stool with Armrests
Suitable for all micro surgery including: Neuro, Ophthalmic & ENT Surgery.
● Armrests
● Hydraulic height adjustment with foot pump
● Adjustable backrest
● Foot brake
● Comfortable Surgeon’s seat
● 5 anti-static castors
● Height range 61cm to 76cm
GS3030- 00
Brake
Foot Pump
SURGEONS OPERATING STOOLS
Adjustable Armrest
Coburg Micro Surgery Stool
Suitable for all micro surgery including: Neuro, Ophthalmic & ENT Surgery.
● Armrests with swivel ball joints, detachable and autoclavable
● Hydraulic height adjustment with foot pump
● Adjustable backrest
● Foot brake
● Comfortable Surgeon’s seat, either round or saddle shaped
● 5 anti-static castors
● Height range 61cm to 76cm
Surgical Instruments of Excellence
GS3016- 00S with Armrests + Saddle Seat
GS3016- 00R with Armrests + Round Seat
Coburg Stool
Suitable for all disciplines of surgery including: Neuro, Ophthalmic & ENT Surgery.
● Hydraulic height adjustment with foot pump
● Adjustable backrest
● Foot brake
● Comfortable Surgeon’s seat, either round or saddle shaped
