rice lake - Concrete Batch Controllers

Page 1

TABLE OF CONTENTS

CB-2 CONCRETE BATCH CONTROLLER..................................................314 Multi-Scale Automated Batching System

CB-3 CONCRETE BATCH CONTROLLER..................................................316

www.ricelake.com | Phone: 800-472-6703

Multi-Scale Automated Batching System with PC Program

CONCRETE BATCH CONTROLLERS

Concrete Batch Controllers

Visit ricelake.com/spanish to see all Rice Lake materials available in Spanish Product names, logos, brands and other trademarks featured or referred to within this publication are the property of their respective trademark holders.

An ISO 9001 Registered Company © 2018 Rice Lake Weighing Systems 01/18 Prices and specifications subject to change without notice. Visit ricelake.com for current prices.

313


CB-2 Concrete Batch Controller Multi-Scale Automated Batching System

CONCRETE BATCH CONTROLLERS

Specifications Continued Sense Amplifier: Differential amplifier with four and six wire sensing

Analog Signal Input Range: -10 mV to +40 mV

Analog Signal Sensitivity: 0.3 µV/graduation minimum at 7.5 Hz 1.0 µV/graduation typical at 120 Hz 4.0 µV/graduation typical at 960 Hz

A/D Sample Rate: 7.5 to 960 Hz, software selectable (120 recommended)

Calibration Method: Software, contents stored in flash memory

Input Overload: Load cell signal lines ±10 V continuous, ESD protected

Standard Features

Note: Factory field installation required, minimum three days on site

www.ricelake.com | Phone: 800-472-6703

• One aggregate and one cement scale, water scale is standard for 93503/93504 • Manual override controls • Batch ticket printing • One megabyte data storage • Material usage by day/week/month/year and inventory on-hand with reporting • Automatic aeration control for cement silos and weigh hoppers • Multiple freefall values per material • Split batching for loads larger than plant capacity with pre-weighing next batch for maximum throughput • Automatic dust collection outputs • Order or load based batching • US standard or metric (SI) operation • Aggregate conveyor/skiphoist controls • Loss-in-weight aggregate dispensing • Four dual or eight single speed aggregates • Four dual or eight single speed cements • Weighed water with water reservoir • Four or eight auxiliary manual controls • Continuous batching with mixer controls for central mix block or precast plants

RFI/EMI Protection: Signal, excitation and sense lines protected

Analog Output: Option card: 16 bit resolution DAC Load resistance: 1.1 KΩ minimum Voltage output: 0–10 VDC Current output: 0–20 mA External loop resistance: 840 Ω maximum

Microcomputer: Motorola ColdFire® MCF5307 main processor at 90 MHz

Digital Filter: Software selectable: 1–256, enhanced RATTLETRAP® hybrid digital filtering

Display: (W x H) 4.6 in x 3.4 in (116 mm x 86 mm), 320 x 240 pixel VGA liquid crystal display (LCD) module with adjustable contrast, 75 Hz scan rate 26,000 cd/m2 brightness

Keyboard: 27-key membrane panel, PS/2 port for external keyboard connection

Warranty: Two-year limited warranty

Optional Features • Dual moisture probe interface (supports 4-20 mA or 0-10 V probes) • Ethernet TCP/IP • Spanish user program

Specifications: 920i Materials: 8 single speed aggregates or 4 dual-speed 8 single or 4 dual-speed cements Hot and cold metered or weighed water delivered in two additions 6 metered admixtures configurable as bottle or direct feed

1 Megabyte Data Storage: 2,200 mix designs, 750 customers, 125 trucks, 99 materials, 400 orders

State Modes: MnDOT

Line Voltages: 115 or 230 VAC

Frequency: 50 or 60 Hz

Power Consumption: 340 mA, maximum at 115 VAC (26 W) / 240 mA at 230 VAC (26 W)

Full Scale Input Signal: Up to 40 mV

Excitation Voltage:

314

10 ±0.5 VDC, 16 x 350 Ω or 32 x 700 Ω load cells per A/D card

An ISO 9001 Registered Company © 2018 Rice Lake Weighing Systems 01/18 Prices and specifications subject to change without notice. Visit ricelake.com for current prices.


CB-2 Concrete Batch Controller Part Number/Price Part#

Description

Est. Weight

93501 93502 93503 93504 FLD-INSTALL FLD-INSTALLSA FLD-INSTALLSU

CB-2 Concrete Batching Controller Metered Water/4 Cement/8 Aggregate/6 Admix 115 VAC CB-2 Concrete Batching Controller Metered Water/4 Cement/8 Aggregate/6 Admix 230 VAC CB-2 Concrete Batching Controller Weighed Water/4 Cement/8 Aggregate/6 Admix 115 VAC CB-2 Concrete Batching Controller Weighed Water/4 Cement/8 Aggregate/6 Admix 230 VAC Factory field installation required (minimum 3 days on site) Factory field installation, Saturday Factory field installation, Sunday

180 lb 180 lb 180 lb 180 lb

Options/Accessories Part #

Description

93511 110783 113872

Dual-moisture probe input (factory installed option) Load mix designs and test prior to shipping Phone support (4 hours)

CONCRETE BATCH CONTROLLERS

Multi-Scale Automated Batching

31.63

14.00 14.56

31.32 31.32

www.ricelake.com | Phone: 800-472-6703

22.56 22.56

315 An ISO 9001 Registered Company © 2018 Rice Lake Weighing Systems 01/18 Prices and specifications subject to change without notice. Visit ricelake.com for current prices.


CB-3 Concrete Batch Controller

Multi-Scale Automated Batching System with PC Program

CONCRETE BATCH CONTROLLERS

Specifications: Industrial PC (cont) Data Storage Capacity: 128 GB

Interfaces: Two USB Two Ethernet

Monitor Output: One SDL/DVI

Operating System: Linux Ubuntu 16.04

Voltage: 24 VDC

Specifications: 920i

Standard Features

www.ricelake.com | Phone: 800-472-6703

(Note: Factory field installation required, minimum of three days on-site)

Line Voltages:

• One aggregate and one cement scale, water scale is standard for 177746/177747 • Manual override controls • Customized batch ticket printing • 128 gigabyte data storage • Material usage by day/week/month/year and inventory on-hand with reporting • Automatic aeration control for cement silos and weigh hoppers • Multiple freefall values per material • Split batching for loads larger than plant capacity with pre-weighing next batch for maximum throughput • Automatic dust collection outputs • Order or load based batching • US standard or metric (SI) operation • Aggregate conveyor/skiphoist controls • Loss-in-weight aggregate dispensing • Four dual or eight single speed aggregates • Four dual or eight single speed cements • Weighed water with water reservoir • Four or eight auxiliary manual controls • Continuous batching with mixer controls for central mix block or precast plants • Ethernet TCP/IP • Up to six admixtures • Multi-user interface • Dual moisture probe interface supports 4-20 mA

Frequency:

Optional Features • Monitor • Keyboard • USB hub four ports • USB WIFI don-gal • Mouse • Additional four admixture control box • Portable batch plant system • Control panel for remote batching

Specifications: Industrial PC

115 or 230 VAC 50 or 60 Hz

Power Consumption: 500 mA, maximum at 115 VAC (26 W) / 240 mA at 230 VAC (26 W)

Full Scale Input Signal: Up to 40 mV

Excitation Voltage: 10 ±0.5 VDC, 16 x 350 Ω or 32 x 700 Ω load cells per A/D card

Sense Amplifier: Differential amplifier with 4 and 6 wire sensing

Analog Signal Input Range: -10 mV to +40 mV

Analog Signal Sensitivity: 0.3 µV/graduation minimum at 7.5 Hz 1.0 µV/graduation typical at 120 Hz 4.0 µV/graduation typical at 960 Hz

A/D Sample Rate: 60 Hz

Calibration Method: Software, contents stored in flash memory

Input Overload: Load cell signal lines ±10 V continuous, ESD protected

RFI/EMI Protection: Signal, excitation and sense lines protected

Microcomputer: Motorola ColdFire® MCF5307 main processor at 90 MHz

Digital Filter: Software selectable: 1–256, enhanced RATTLETRAP® hybrid digital filtering

Display: (W x H) 4.6 in x 3.4 in (116 mm x 86 mm), 320 x 240 pixel VGA liquid crystal display (LCD) module with adjustable contrast, 75 Hz scan rate 26,000 cd/m2 brightness

Keyboard: 27-key membrane panel

Warranty: Two-year limited warranty

Model: B&R APC2100

Processor Type: Intel Atom E3845 Quad Core

Data Storage Type:

316

Industrial 5CFast Card

An ISO 9001 Registered Company © 2018 Rice Lake Weighing Systems 01/18 Prices and specifications subject to change without notice. Visit ricelake.com for current prices.


CB-3 Concrete Batch Controller

Part Number/Price Part#

Description

Est. Weight

177746 177747 FLD-INSTALL FLD-INSTALLSA FLD-INSTALLSU

CB-3 concrete batching controller, metered water, PC included CB-3 concrete batching controller, weighed water, PC included Factory field installation required (minimum 3 days on site) Factory field installation, Saturday Factory field installation, Sunday

180 lb 180 lb

Options/Accessories Part #

Description

184716 175877 179209 179210 179211 179212 185667 186277

Upgrade kit CB-1 to CB-3, PC included Upgrade kit CB-2 to CB-3, PC included Accessory kit (includes monitor, keyboard, USB hub and mouse) Monitor, Acer Keyboard, Microsoft Mouse, Microsoft USB Hub Wireless USB adapter WIFI

CONCRETE BATCH CONTROLLERS

Multi-Scale Automated Batching System with PC Program

31.63

14.56 14.00

CB-3 Ticket Output

31.32 31.32

CB-3 Truck Monitoring Screen

www.ricelake.com | Phone: 800-472-6703

22.56 22.56

317 CB-3 Batcher Screen An ISO 9001 Registered Company © 2018 Rice Lake Weighing Systems 01/18 Prices and specifications subject to change without notice. Visit ricelake.com for current prices.


Turn static files into dynamic content formats.

Create a flipbook
Issuu converts static files into: digital portfolios, online yearbooks, online catalogs, digital photo albums and more. Sign up and create your flipbook.