rice lake - Indicators/Controllers by MetroMatemáticas

TABLE OF CONTENTS 120/120 PLUS..................................................502

INTRINSICALLY SAFE

IQ PLUS 210...................................................504

EXPLOSIVE ENVIRONMENT EQUIPMENT POLICY.....................................551

CW-90 AND CW-90X...................................505

HAZARDOUS AREA CLASSIFICATION......552

Digital Weight Indicator

SURVIVOR 420HE.........................................507

EXPLOSIVE ENVIRONMENT SOLUTIONS........................553

420 PLUS..........................................................508

HAZARDOUS ATMOSPHERES (FOR REFERENCE ONLY)..............................554

Checkweigher Indicator Only ®

Hostile Environment Digital Weight Indicator Digital Weight Indicator

480/480 PLUS LEGEND SERIES....................510 Digital Weight Indicator

482/482 PLUS LEGEND SERIES....................512 Digital Weight Indicator

720i SERIES.....................................................514 ™

Programmable Weight Indicator/Controller

820i SERIES.....................................................516 ™

Programmable Weight Indicator/Controller ™

Digital Weight Indicator/Controller

920i SERIES.....................................................521 Programmable Weight Indicator/Controller

Programmable Color Touchscreen Weight Indicator/Controller

920i USER PROGRAMS...............................531 ®

920i FLEXWEIGH SYSTEMS..........................532 ®

Fillers/Batchers

INDUSTRIAL CONTROL PRODUCTS

EL232 XPCD....................................................560

TRIPP-LITE USB TO SERIAL CONVERTERS..............................576

Intrinsically Safe Digital Weight Indicator Explosion Proof Remote Serial Display

INTRINSIC SAFETY BARRIERS......................561 REMOTE I/O INTERFACE...............................563 720i /820i /920i ®

PROTOCOL CARDS PROFIBUS DP INTERFACE............................563 720i /820i /920i ™

DEVICENET INTERFACE...............................564 720i /820i /920i ™

920i FLEXWEIGH SYSTEMS.........................534 Bulkweighers

820i /920i ®

Flow Rate Controllers

920i FLEXWEIGH SYSTEMS.........................535 ®

Hand Batching

MSI-8000..........................................................537 RF Remote Display

MSI-8000HD....................................................538 Digital Weight Indicator

MSI-8004HD....................................................540 Indicator/RF LED Remote Display

MSI-9850 CELLSCALE RF DIGITAL INDICATOR......................................542 ™

VIRTUI2 ...........................................................544

720i /820i /920i ®

ETHERNET TCP/IP INTERFACE......................565 ®

PROFINET INTERFACE...................................566

441/442 BRIDGESENSORS...........................580 Load Cell Signal Conditioners

AMPHENOL RJF 544....................................581 Harsh Environment Ethernet Connection System

ABLECABLE ...................................................582 RS 232/USB Serial Smart Cable Direct, Keyboard Input Direct

GO-BETWEEN.................................................583 Data Capture and Storage

880/1280

DEVICENET INTERFACE...............................567 ™

880/1280

MODBUS-TCP INTERFACE...........................567 ®

880/1280

ETHERNET/IP INTERFACE.............................568 ®

880/1280

ETHERCAT INTERFACE...................................568 880/1280

SENDIT WIRELESS LOAD CELL INTERFACE SYSTEM.......................................572

™

Wireless Load Cell Interface System ™

CONNEXLINK ..............................................573 ™

GRAYHILL RELAYS AND RACKS..................549

Load Cell Signal Conditioners

SCT-30 AND SCT-40.....................................547

RELAYS AND RACKS.....................................549

API 4058G.......................................................579

880/1280

TRANSEND .....................................................569

Signal Conditioning Transmitter/Indicator

Signal Conditioner

PROFIBUS DP INTERFACE............................566

RF TRANSCEIVERS

SCT-1100, 2200, SCT-10, 20, 30, AND SCT-40....................................................548

463 BRIDGESENSOR......................................578

SCT-1100 AND SCT-2200 ADVANCED SERIES........................................546

Signal Conditioning Transmitter/Indicator

Signal Conditioner

720i /820i /920i

PC-Based HMI for iQube

Signal Conditioning Transmitter/Indicator

437 BRIDGESENSOR......................................577

ETHERNET/IP INTERFACE.............................565

2 ®

Serial Adapters

™

920i FLEXWEIGH SYSTEMS..........................535

CONTROLNET INTERFACE..........................564

™

ACCESSORIES

320IS PLUS.......................................................558

Intrinsically Safe Digital Weight Indicator

™

1280 ENTERPRISE SERIES..............................526

MANUAL PUSHBUTTONS/ PUSHBUTTON SWITCHES..............................575

QWERTY STYLE KEYBOARDS AND ALUMINUM KEYPADS.........................575

DIN RAIL TRANSIENT PROTECTOR & FUSE.......................................575

320IS.................................................................556

™

880/880 PLUS PERFORMANCE SERIES...............................518

VISIBLE LIGHTS AND AUDIBLE ALARMS..........................................575

Wireless Radio 900 MHZ Transceivers

www.ricelake.com | Phone: 800-472-6703

Digital Weight Indicator

INDICATORS / CONTROLLERS

Indicators / Controllers

INDUSTRIAL BROADBAND WIRELESS ETHERNET.......................................574 EL226 TRANSIENT PROTECTION BOARD...................................575

Visit Visit ricelake.com/spanish ricelake.com/spanish to see to see all all Rice Rice Lake Lake materials materials available available in Spanish in Spanish Product names, logos, brands and other trademarks featured or referred to within this publication are the property of their respective trademark holders.

501

120/120 Plus

Digital Weight Indicator

INDICATORS / CONTROLLERS

Specifications Power:

120/120 Plus: Line voltages: 115 or 230 VAC Frequency: 50 or 60 Hz 120 Plus: (estimated battery life) 60 hours with 1 x 350Ω, 40 hours with 4 x 350Ω Charge time eight hours

Excitation Voltage: 5 VDC, 4 x 350Ω or 8 x 700Ω load cells

Analog Signal Input Range: -0.6 mV/V - 3.0 mV/V

120

Analog Signal Sensitivity: 0.3 µV/graduation minimum, 1.5 µV/grad recommended

A/D Sample Rate:

120: 3 to 30 Hz, software selectable 120 Plus: 30 Hz

120 Plus

Resolution: Internal: 1 million internal graduations Display: 10,000 displayed graduations

System Linearity / PI Rating: Within 0.01% of full scale

Standard Features

Circuit Protection:

120

www.ricelake.com | Phone: 800-472-6703

• LED display, 0.8 in (20.3 mm) six-digit, seven-segment • Configurable analog to digital measurement rate • Power for four 350 ohms load cells • Primary/secondary units configuration: lb, kg, ounces, grams • Five-button operation • Two independent communication ports: (1) full duplex, (1) unidirectional or active 20 mA current loop • Standardized EDP command sets • Programmable ticket format up to two 180-character printout • Full front-panel digital calibration and configuration • Tilt stand • Three-stage digital filtering • Consecutive transaction numbering • Time and date (volatile) 120 Plus

• LCD display, 0.8 in (20.3 mm) six-digit, seven-segment • Internal rechargeable lithium battery and wall adapter • Power save feature for 700 hours of battery life • Ten stored tare values • Display hold (based on three second average) • Time and date • Configurable with Revolution software ®

Approvals

RFI, EMI, ESD protected

Load Cell Connection: Cord grip entry Detachable plug (optional)

Serial Output: Measurement Canada Approved

EDP port: Full duplex RS-232 Printer port: Output-only RS-232 or active 20mA current loop Both ports: 9600, 4800, 2400, 1200, 600, 300bps; Seven or eight data bits; even, odd or no parity

Status Annunciators:

120/120 Plus: Center of zero, stand still, gross, net, lb, kg, oz, g 120 Plus: Battery, setpoint 1 and 2, Hold

Display:

120: 0.8 in (20 mm), six-digit red light emitting diode (LED) display, seven-segment digits 120 Plus: 0.8 in (20 mm) six-digit LCD with backlight, seven-segment digits

Keys/Buttons:

120: Five-key flat membrane panel, tactile feel 120 Plus: Zero, tare, preset tare, hold, gross/net, units, numeric 0-9, clear, enter/print

(Optional) Digital I/O:

120 Plus: Requires option card 24 volt source Three digital inputs Two digital outputs

Temperature Range Certified: 14°F to 104°F (-10°C to 40°C) Operating: 14°F to 122°F (-10°C to 50°C)

Rating/Material: Enclosure: heavy gauge ABS

Weight: 2.6 lb (1.2 kg)

Warranty: One-year limited warranty

Approvals:

502

NTEP CC 03-059, Class III/IIIL 10,000d Measurement Canada AM-5517, Class III/IIIHD 10,000d EU Test Certificate TC7028 (120) Class III, 10,000d EU Test Certificate TC7626 (120 Plus) Class III, 10,000d CE marked

120/120 Plus

Part Number/Price

Part #

B E

120 131923** 120 Plus 103632** 107619**

Description

Est. Weight

Desktop 115 VAC/230 VAC

3 lb

Desktop 115/230 VAC Desktop 115/230 VAC with digital I/O option

3 lb 3 lb

**Both plugs included with power adapter NEMA 5-15 plug

CEE 7/7 plug (Euro)

Options/Accessories

Part #

Description

93205 Load cell connector with 6 m length pigtail (requires 103507) 82505 Six-pin socket external load cell connector (requires 103507) 103507 External load cell plug replaces cord grip (requires 82505 or cable 93205) 107620 Digital I/O card for 120 Plus 105670 15-Pin connector for 120 Plus 106705 15-Pin Interface cable for 120 Plus, 2 m length 76699 Additional operating manual for 120 105914 Additional operating manual for 120 Plus 77925* Revolution scale software Primary Component Parts for 120 131924 Board assembly for use with internal LC connector 78610 Overlay membrane switch 131925** Power supply, 115 VAC/230 VAC 64794 Cable, null modem DB9F to DB9M Primary Component Parts for 120 Plus 103634 CPU/Display board assembly 103635 Overlay membrane switch 103636** Power supply, 115 VAC/230 VAC 103637 Rechargeable battery

INDICATORS / CONTROLLERS

Digital Weight Indicator

Dimensions A B

7.32 in (186 mm) 6.06 in (154 mm)

C D

3.74 in (95 mm) 1.65 in (42 mm)

4.76 in (121 mm)

www.ricelake.com | Phone: 800-472-6703

*Revolution can be downloaded for free at www.ricelake.com

IQ Plus 210 ®

Digital Weight Indicator

INDICATORS / CONTROLLERS

Specifications Power: Line voltages: 115 VAC or 230 VAC Frequency: 50-60 Hz

Excitation Voltage: 10 VDC 4 x 350Ω load cells

Analog Signal Input Range: 0.6 mV/V – 4.5 mV/V

Analog Signal Sensitivity: 0.3 µV/graduation minimum, 1.5 µV/grad recommended

A/D Sample Rate: 15 Hz

Resolution: Display: 10,000d maximum

Digital Inputs: Two inputs, TTL or switch closure, active-low

Communication Ports: Full duplex RS-232, 9600, 4800, 2400, 1200bps; Seven or eight data bits, even, off, or no parity

Display: Six-digit light emitting diode (LED) display Seven-segment, 0.8 in (20 mm) digits

Standard Features

Temperature Range

Approvals

• Piezo switch technology with stainless steel buttons (zero and units) • LED display, 0.8 in, six-digit, seven-segment • NEMA Type 4X stainless steel enclosure • Status annunciators: lb, kg, oz, g, negative, motion, center of zero • Displays units in decimals lb, kg, oz, lb and oz and grams • One full duplex RS-232 port • Two digital inputs for remote zero, print and units • PreVent breather vent • Configurable with Revolution software

Operating: 14°F to 104°F (-10°C to 40°C) Storage: 14°F to 122°F (-10°C to 50°C)

Enclosure Dimensions: 9.5 in x 6.0 in x 2.75 in (241 mm x 152 mm x 70 mm)

Rating Material: NEMA Type 4X/IP66, stainless steel

Weight: 10 lb (4.5 kg) Warranty:

™

www.ricelake.com | Phone: 800-472-6703

Part Number/Price Part #

Description

Est. Weight

65137 65138

IQ Plus 210, 115 VAC IQ Plus 210, 230 VAC

10 lb 10 lb

Two-year limited warranty Approvals: NTEP CC 00-045, Class III/IIL 10,000d UL/cUL Listed

Options/Accessories Part #

Description

64640

Additional operating manual

Dimensions A B C D

9.50 in (241 mm) 10.03 in (254 mm) 11.67 in (296 mm) 2.69 in (68 mm)

E F G

6.00 in (152 mm) 8.58 in (217 mm) 3.75 in (95 mm)

B C D

E F

504

CW-90 and CW-90X

Checkweigher Indicator Only

INDICATORS / CONTROLLERS

Specifications Power - AC: Line voltages: 115-230 VAC Frequency: 50-60 Hz

Power Consumption: 1.5 A at 115 VAC (8 W) 0.75 A at 230 VAC (8 W)

Excitation Voltage: +5 VDC 8 x 350Ω or 16 x 700Ω load cells

Analog Signal Input Range: -0.5 mV/V - 4.5 mV/V

Analog Signal Sensitivity: 0.3 uV/graduation minimum, 1.5 uV/graduation recommended CW-90

A/D Sample Rate: 7.5 to 960 Hz software selectable

Resolution: Display: 100,000 graduations maximum

System Linearity:

CW-90X

± 0.01% full scale

Digital I/O: Four channels on CPU board RFI, EMI, ESD protection

Status Annunciators: Designators for percent, kg, gm, lb, oz, center of zero, G/B, N, T, PT, neg, motion

Display: Large 0.8 in 14-segment, six-digit high-intensity red LED display

Keys/Buttons:

CW-90: Membrane keypad, 23 keys with international symbols CW-90X: Piezo keypad, 11 keys with international symbols

Temperature Range Certified: 14ºF to 104ºF (-10ºC to 40ºC)

Standard Features • PreVent breather vent • Storage for up to 50 IDs • Unit of measure: kg, gm, lb, oz, lb/oz • LED display, 0.8 in, six-digit, 14-segment • Two full duplex serial ports • Configurable print formats • Audit trail tracking • Optional communications: Ethernet, USB or fiber optic • Four configurable digital I/O • Reflash memory to upgrade firmware • Auto print capability ™

Rating/Material:

CW-90

Warranty:

• Membrane keypad consisting of zero, units, print, tare, over, under, ID, target, 0-9, clear, decimal, enter, menu, power • 304 stainless steel, IP66 rated • Time and date

Approvals:

CW-90X

CW-90: IP66, stainless steel CW-90X: IP69K, stainless steel CW-90: Two-year limited warranty CW-90X: Three-year limited warranty CW-90: NTEP CC 08-092, CW-90X: NTEP CC 08-092, Class III/IIIL 10,000d Measurement Canada AM-5710 OIML R76/2006-GBI-10.02 EU Test Certificate GB-1385 UL/cUL Listed CE marked

• Piezo keypad consisting of zero, units, print, tare, over, under, ID, target, enter, menu, power • 304 stainless steel, IP69 K rated • Battery backed time and date

Approvals

Measurement Canada Approved

www.ricelake.com | Phone: 800-472-6703

Circuit Protection:

CW-90 and CW-90X Checkweigher Indicator Only

INDICATORS / CONTROLLERS

CW-90 Part Number/Price Part # 105970† 105971

††

118888† 171247†††

Est. Weight

Description CW-90, 115 VAC CW-90, 230 VAC, CE marked/OIML approved CW-90, 230 VAC CW-90, 230 VAC

7 lb Gross/Brutto

7 lb

Net

G/B N

7 lb 7 lb

CW-90X Part Number/Price Est. Weight

Part #

Description

105972†

CW-90X, 115 VAC CW-90X, 230 VAC, CE marked/OIML approved CW-90X, 230 VAC CW-90X, 230 VAC

105973†† 118889† 171248†††

7 lb

G H

B C

7 lb 7 lb 7 lb

Dimensions

† NEMA 5-15 plug

†† CEE 7/7 plug (Euro)

††† IEC Type I plug

CW-90 and CW90X Options/Accessories Part #

Description

77142 108671 93245 95357 171968 96736 78026 80892 117358

Ethernet TCP/IP Wireless LAN card Wi-Fi 802.11 A/B USB Port (PC connection only) USB cable, Type A to mini-B, 1 m Firmware download cable Fiber optic board Fiber optic, duplex cable 100 ft Fiber optic cutter WeighVault (requires part number 77142 or 108671)

A 9.5 in (241 mm) B 10.02 in (255 mm) C 11.24in (285 mm)

D 3.12 in (79 mm) E 6.00 in (152 mm) F 8.57 in (218 mm)

G 3.75 in (95 mm) H 4.00 in (102 mm)

™

www.ricelake.com | Phone: 800-472-6703

SURVIVOR 420HE ®

Hostile Environment Digital Weight Indicator

INDICATORS / CONTROLLERS

Specifications Power: Line voltages: 115 or 230 VAC Frequency: 50/60 Hz Power consumption: 25 W maximum

Excitation Voltage: 5 VDC Load current:115 mA maximum (8 x 350Ω load cells)

Analog Signal Input Range: 0.5 mV/V - 3.5 mV/V

Analog Signal Sensitivity: 0.3 mV/V/graduations minimum

A/D Sample Rate: 7.5 to 60 Hz software selectable

Resolution: Internal: Eight million counts Display: Selectable up to 100,000d

System Linearity / PI Rating: Within 0.01% of FS

Digital I/O: Two inputs, TTL or switch closure, active low Two outputs, 250mA max sink

Circuit Protection:

Standard Features

ESD, EMI, RFI protected

Communication Ports: Printer port: RS-232 full duplex 20mA simplex EDP Port: RS-232 full duplex Baud rates: 300 to 38,400 seven or eight data bits; even, odd or no parity

Status Annunciators: Tare, entered tare, standstill, net, gross, center of zero, minus sign, lb, kg

Display:

Approvals

• NEMA Type 4X fiberglass-reinforced polyester (FRP) enclosure • LED display, 2 in • Universal mounting tabs (replaceable) • Up to 60 updates/second • Selectable display update rate • Five-button operation, environmentally protected mechanical switches • Two communication ports, full duplex RS-232 • RATTLETRAP vibration control • Configurable with Revolution software

Measurement Canada Approved

2 in (50 mm) LED Display, Decimal point available at each digit

Keys/Buttons: Five-button rubber-booted watertight switches

Temperature Range Operating: 14°F to 104°F (-10°C to 40°C)

Rating/Material: NEMA Type 4X FRP

Part Number/Price Part #

Description

Est. Weight

87959† 87960†

SURVIVOR 420HE 115 VAC SURVIVOR 420HE 230 VAC

18 lb 18 lb

Options/Accessories

Weight: Approximately 18 lb (8.2 kg)

Part #

Warranty: Two-year limited warranty

Approvals: NTEP CC 04-076, Class III/IIIL 10,000d Measurement Canada AM-5554, Class III/IIIHD 10,000d

Description

30911 Additional mounting tabs (set of 4) 92777 Filter, PreVent™ vent kit 87972 Additional operating manual Primary Component Parts 87958 Board assembly, CPU 72996 AC power supply 87808 Board display, 2 in LED 87971 Switch assembly, six push button 87968 Front panel overlay

www.ricelake.com | Phone: 800-472-6703

† NEMA 5-15 plug

Dimensions A B C

12.50 in (318 mm) 10.50 in (267 mm) 8.28 in (210 mm)

D E

14.94 in (379 mm) 10.00 in (254 mm)

507

420 Plus

Digital Weight Indicator

INDICATORS / CONTROLLERS

Specifications Power, AC: Line voltages: 100-240 VAC Frequency: 50-60 Hz Power consumption: 1.5 A at 115 VAC (8 W) 0.75 A at 230 VAC (8 W)

Power, DC: Line voltages: 9-36 VDC DC input Power consumption: 1.5 A Max

Excitation Voltage: +5 VDC 8 x 350Ω or 16 x 700Ω load cells

Analog Signal Input Range: -0.5 mV/V - 4.5 mV/V

Analog Signal Sensitivity: 0.3 µV/graduation minimum, 1.5 µV/grad recommended

A/D Sample Rate: 7.5 to 60 Hz software selectable

Resolution: Internal: 8 million internal graduations Display: 100,000 displayed graduations

System Linearity / PI Rating: Within 0.01% of full scale

Standard Features

Digital I/O:

www.ricelake.com | Phone: 800-472-6703

• LED display, 0.8 in (20.3 mm), six-digit, seven-segment • Full numeric keypad • NEMA Type 4X/IP66 stainless steel washdown enclosure • Power for eight 350 ohms load cells or 16, 700 ohms load cells • Configurable analog to digital measurement rate • Primary/secondary units configuration: lb, kg, ounces, short tons, metric tons, grams or none • Two independent communication ports: (2) full duplex, (1) unidirectional active 20 mA current loop • Standardized EDP command sets • Programmable ticket formats up to three 300-character printouts • Full front-panel digital calibration and configuration • Universal mounting stand • Three-stage digital filtering • Consecutive transaction numbering • Two digital inputs, two digital outputs • Time and date • Count mode • Two setpoints, free running • Keyed tare • Accumulator • Configurable with Revolution software ®

Approvals

Two inputs with eight functions Two outputs, 250 mA max sink

Circuit Protection: RFI, EMI, ESD protection

Communication Ports: EDP port: Full duplex RS-232 Printer port: Full duplex RS-232 or simplex active 20 mA current loop Both ports: 38400, 19200, 9600, 4800, 2400, 1200, 600, 300bps; 7 or 8 data bits; even, odd, or no parity

Display: Measurement Canada Approved

0.8 in (20 mm), six-digit super red light emitting diode (LED) display, seven-segment, digits

Status Annunciators: Designators for: Center of zero, stand still, gross, net, lb, kg, count, tare

Keys/Buttons: 21-key flat membrane panel

Temperature Range Certified: 14°F to 104°F (-10°C to 40°C) Operating: 14°F to 122°F (-10°C to 50°C)

Weight: 6.1 lb (2.8 kg)

Rating/Material: Enclosure: NEMA Type 4X/IP66, heavy gauge stainless steel

Warranty: Two-year limited warranty

Approvals: NTEP CC 04-076, Class III/IIIL 10,000d Measurement Canada AM-5554, Class III/IIIHD 10,000d EU Test Certificate TC004, 10,000d UL/cUL Listed CE marked

420 Plus

Part Number/Price Est. Weight

Part #

Description

85124† 85125†† 85126†† 85656

420, 115 VAC 420, 230 VAC 420, 230 VAC CE marked/OIML approved 420, 9-36 VDC nominal 420 Plus, 115 VAC w/quick connect (Required cable 53640) 420 Plus, 230 VAC w/quick connect (Required cable 53640)

88652† 88653††

† NEMA 5-15 plug

10 lb 10 lb 10 lb 10 lb

Gross

Net

kg Count

ZERO

POWER I/O

10 lb 6

GROSS NET

TARE

UNITS

MODE

ENTER

SAMPLE

DISPLAY TARE

SETPOINT

TIME/DATE

CLR

10 lb

†† CEE 7/7 plug (Euro)

Options/Accessories Part #

85659 Analog output: selectable 0-10V, 4-20 mA 52948** Panel mount kit ® 77925* Revolution scale software 85127 Additional operating manual ™ 92777 Filter, PreVent vent kit 91895 Quick Connect, female connector and cable, 17 in 53640 Quick Connect, male connector and cable, 20 ft Primary Component Parts 88835 Board assembly 84397 Overlay membrane panel 76556 Power supply, auto switching 132750 DC/DC converter, 9-36 VDC 85791 Fuse, 2.5 A, 5 mm x 20 mm

B C

Description

INDICATORS / CONTROLLERS

Digital Weight Indicator

Dimensions A 9.50 in (241 mm) B 10.02 in (255 mm) C 11.80 in (300 mm)

E 3.12 in (79 mm) F 8.57 in (217 mm) G 6.00 in (152 mm)

H 3.25 in (83 mm)

www.ricelake.com | Phone: 800-472-6703

* Revolution can be downloaded for free at www.ricelake.com ** Panel mount kit is not NEMA rated, consult factory for modifications.

480/480 Plus Legend Series Digital Weight Indicator

INDICATORS / CONTROLLERS

Specifications Power: Line voltages: 100-240 VAC Frequency: 50-60 Hz DC voltages: n/a Power Consumption: 8 W

Excitation Voltage:

480

5 VDC, 8 x 350Ω or 16 x 700Ωload cells

Analog Signal Input Range: ±7 mV/V

Analog Signal Sensitivity: 0.1 uV/graduation minimum 0.5 uV/graduation recommended

A/D Sample Rate: 5, 10, 20, 40 Hz, software selectable

Resolution: Internal: 523,000 counts Display: 100,000 graduations

480 Plus

System Linearity / PI Rating: Within 0.01% of full scale

Digital I/O: RFI capacitor bypass and ESD suppressors

Communication Ports:

Standard Features

www.ricelake.com | Phone: 800-472-6703

• LED display, 0.8 in (20 mm), six-digit, seven-segment • Time and date, battery backed • Local/remote operation • Numeric keypad (480 Plus) • Keyed entries for setpoint values (480 Plus) • Two independent serial ports, RS-232 and 20 mA • NEMA Type 4X/IP66 stainless steel washdown enclosure • Programmable ticket formats for gross, net, accumulator and setpoints • Five continuous stream formats • Adapter filter or rolling average filter • Operator functions through menu for audit trail, preset tare, unit ID, accumulator, time and date, setpoints, communications and print formats • Eight setpoints, sequenced batch engine • Configurable with Revolution software ®

Options

• Analog output, 0-10 VDC, 0-20 mA, 4-20 mA, selection for 20% offset • Relay output, two digital inputs, four dry contact relays (supports 2 boards) • Ethernet TCP/IP and USB interface (requires cable) • Battery, rechargeable lithium ion Power for 18 hours of battery life on one 350 ohm load Power-saving modes for sleep and wake-up threshold

(Optional) Analog Output: 16-bit resolution, voltage output 0-10 VDC, current output 0-20 mA / 4-20 mA

(Optional) Relay Board: Measurement Canada Approved

Two opto-isolated, 5 to 24 VDC, active high inputs. Two inputs (requires relay output option). Primary keys, pseudo functions, batching functions. (4) 30 VDC, 2 amp dry-contract relays

(Optional) Ethernet and USB Board: USB five-pin header for PC, printer or flash drive. Ethernet TCP/IP, RJ45 jack, server and client ports.

Display: LED display, 0.8 in (20 mm), six-digit, seven-segment

Status Annunciators: Gross, net, center of zero, stand still, lb, kg, tare, preset tare

Keys/Buttons: Flat membrane panel, embossed keys, tactile feel

Temperature Range Certified: 14°F to 104°F (-10°C to 40°C) Operating: 14°F to 122°F (-10°C to 50°C)

Specification Options

Weight:

Analog Output:

Rating/Material:

6.4 lb (2.9 kg)

16-bit resolution, voltage output 0-10 VDC, current output 0-20 mA / 4-20 mA

Relay Board: Two opto-isolated, 5 to 24 VDC, active high inputs. Two inputs (requires relay output option). Primary keys, pseudo functions, batching functions. (4) 30 VDC, 2 amp dry-contract relays

Ethernet and USB Board: USB 5-pin header for PC, printer or flash drive. Ethernet TCP/IP, RJ45 jack, server and client ports.

510

Approvals

Com 1: RS-232 full duplex Com 2: RS-232 full duplex or 20 mA simplex, continuous Both ports 1200, 2400, 4800, 9600, 19200, 38400 baud seven or eight data bits, even, odd or no parity

Enclosure: NEMA Type 4X/IP66, heavy-gauge stainless steel

Warranty: Two-year limited warranty

EMC Immunity: EN 50082 Part 2 IEC EN 61000-4-2, 3, 4, 5, 6, 8, and 11

Approvals: Measurement Canada AM-5892, Accuracy Class III/IIIHD, 10,000d NTEP CC 12-123, Accuracy Class III/IIIL, 10,000d OIML R76/2006-NL1-12.48, EU Test Certificate TC8322 Accuracy Class III, 10,000d CE Marked UL/cUL Listed

480/480 Plus Legend Series Part Number/Price: 480 Part #

480 115 VAC † 126564 480 LED 130338 480 LED with analog output 130340 480 LED with relay output 164594 480 LED with USB/Ethernet 480 90-264 VAC †† 126565 480 LED 130339 480 LED with analog output 130341 480 LED with relay output 164595 480 LED with USB/Ethernet

Part #

NET

B C Dimensions

Est. Weight

Description

† NEMA 5-15 plug

GROSS BRUTTO

8 lb 8 lb 8 lb 8 lb

480 Plus 115 VAC † 164588 480 Plus LED 164589 480 Plus LED with analog output 164590 480 Plus LED with relay output 164596 480 Plus LED with USB/Ethernet 480 Plus 90-264 VAC †† 164591 480 Plus LED 164592 480 Plus LED with analog output 164593 480 Plus LED with relay output 164597 480 Plus LED with USB/Ethernet

482

8 lb 8 lb 8 lb 8 lb

Part Number/Price: 480 Plus

Est. Weight

Description

A 9.50 in (241 mm) B 10.00 in (254 mm) C 11.00 in (279 mm)

D 3.65 in (92 mm) E 2.75 in (70 mm) F 7.00 in (178 mm)

INDICATORS / CONTROLLERS

Digital Weight Indicator

G 6.00 in (152 mm) H 3.75 in (95 mm)

8 lb 8 lb 8 lb 8 lB 8 lb 8 lb 8 lb 8 lb

†† CEE 7/7 plug (Euro)

Options/Accessories Part #

Description

Mounting bracket for option boards Analog output, 0-10 VDC, 4-20 mA 131341 (requires 131340) Relay board, two digital inputs, four dry contact outputs 131342 (requires 131340) 164600 USB and Ethernet TCP/IP (requires 131340) 164604 Ethernet cable with cord grip, 6 ft 164602 USB cable with cord grip, type A female, 6 in 167707 USB cable with cord grip, type A male, 6 ft 167708 USB cable with cord grip, type B male, 6 ft 165379 Flash update cable 164650 Battery kit, rechargeable lithium ion 151100 A/D sealing kit, used with audit trail tracking 151099 Panel mount bezel (not NEMA Type rated) 83564 Clear protective overlay (package of five) 77925* Revolution scale software, CD 119201 Installation manual Primary Replacement Components 131345 Overlay, 480 six-key, red window 159612 Overlay, 480 Plus with numeric keys, red window 131346 Display board, LED 131316 Power supply, 85-265 VAC 131318 CPU board 131319 A/D board ®

www.ricelake.com | Phone: 800-472-6703

131340

* Revolution can be downloaded for free at www.ricelake.com

482/482 Plus Legend Series

Manufacturer-Approved

Digital Weight Indicator

REPLACEMENT FOR THE 390/590

INDICATORS / CONTROLLERS

Specifications Power: Line voltages: 100-240 VAC Frequency: 50-60 Hz DC voltages: n/a Power consumption: 8 W

482

Excitation Voltage: 5 VDC, 8 x 350Ω or 16 x 700Ω load cells

Analog Signal Input Range: ±7mV/V

Analog Signal Sensitivity: 0.1 µV/graduation minimum, 0.5 µV/graduation recommended

A/D Sample Rate: 5, 10, 20, 40 Hz, software selectable

Resolution:

482 Plus

Internal: 523,000 counts Display: 100,000 graduations

System Linearity / PI Rating: Within 0.01% of full scale

Digital I/O: RFI capacitor bypass and ESD suppressors

Communication Ports:

Standard Features

www.ricelake.com | Phone: 800-472-6703

• LCD backlit display, 0.8 in (20 mm), six-digit, seven-segment • Time and date, battery backed • Local/remote operation • Numeric keypad (482 Plus) • Keyed entries for setpoint values (482 Plus) • Two independent serial ports, RS-232 and 20 mA • NEMA Type 4X/IP66 stainless steel washdown enclosure • Programmable ticket formats for gross, net, accumulator and setpoints • Five continuous stream formats • Adaptive filter or rolling average filter • Configurable with Revolution software • Operator functions through menu for audit trail, preset tare, unit ID, accumulator, time and date, setpoints, communications and print formats • Eight setpoints, sequenced batch engine ®

Options

• Analog output, 0-10 VDC, 0-20 mA, 4-20 mA, selection for 20% offset • Relay output, two digital inputs, four dry contact relays (supports 2 boards) • Ethernet TCP/IP and USB interface (requires cable) • Battery, rechargeable lithium ion Power for 40 hours of battery life on one 350 ohm load Power-saving modes for sleep and wake-up threshold

Approvals

Com 1: RS-232 full duplex Com 2: RS-232 full duplex or 20 mA simplex, continuous Both ports 1200, 2400, 4800, 9600, 19200, 38400 baud seven or eight data bits, even, odd or no parity

(Optional) Analog Output: 16-bit resolution, voltage output 0-10 VDC, current output 0-20 mA / 4-20 mA

(Optional) Relay Board: Measurement Canada Approved

Two opto-isolated, 5 to 24 VDC, active high inputs. Two inputs (requires relay output option). Primary keys, pseudo functions, batching functions. (4) 30 VDC, 2 amp dry-contract relays

(Optional) Ethernet and USB Board: USB five-pin header for PC, printer or flash drive. Ethernet TCP/IP, RJ45 jack, server and client ports.

Display: LCD backlit display, 0.8 in (20 mm), six-digit, seven-segment Transmissive/Transflective

Status Annunciators: Gross, net, center of zero, standstill, lb, kg, tare, preset tare

Keys/Buttons: Flat membrane panel, embossed keys, tactile feel

Temperature Range Certified: 14°F to 104°F (-10°C to 40°C) Operating: 14°F to 122°F (-10°C to 50°C)

Weight: 6.4 lb (2.9 kg)

Rating/Material: Enclosure: NEMA Type 4X/IP66, heavy-gauge stainless steel

Warranty: Two-year limited warranty

EMC Immunity: EN 50082 Part 2 IEC EN 61000-4-2, 3, 4, 5, 6, 8, and 11

Approvals:

512

NTEP CC 12-123, Class III/IIIL, 10 000d Measurement Canada AM-5892, Class III/IIIHD, 10 000d OIML R76/2006-NL1-12.48 EU Test Certificate TC8322 CE Marked UL/cUL Listed

482/482 Plus Legend Series Part Number/Price: 482 Part #

Description

482 115 VAC † 164581 482 LCD 164582 482 LCD with internal battery 482 90-264 VAC † † 164672 482 LCD 164583 482 LCD with internal battery

482

8 lb 8 lb

GROSS BRUTTO

NET

† NEMA 5-15 plug

B C

Est. Weight

Description

482 Plus 115 VAC † 164584 482 Plus LCD 164585 482 Plus LCD with internal battery 482 Plus 90-264 VAC † † 164673 482 Plus LCD 164586 482 Plus LCD with internal battery

8 lb 8 lb

Part Number/Price: 482 Plus Part #

Est. Weight

8 lb 8 lb 8 lb 8 lb

INDICATORS / CONTROLLERS

Digital Weight Indicator

Dimensions A 9.50 in (241 mm) B 10.00 in (254 mm) C 11.00 in (279 mm)

D 3.65 in (92 mm) E 2.75 in (70 mm) F 7.00 in (178 mm)

G 6.00 in (152 mm) H 3.75 in (95 mm)

†† CEE 7/7 plug (Euro)

Options/Accessories Part #

Description

Mounting bracket for option boards output, 0-10 VDC, 4-20 mA 131341 Analog (requires 131340) board, two digital inputs, four dry contact outputs 131342 Relay (requires 131340) 164600 USB and Ethernet TCP/IP (requires 131340) 164604 Ethernet cable with cord grip, 6 ft 164602 USB cable with cord grip, type A female, 6 in 167707 USB cable with cord grip, type A male, 6 ft 167708 USB cable with cord grip, type B male, 6 ft 165379 Flash update cable 164650 Battery kit, rechargeable lithium ion 151100 A/D sealing kit, used with audit trail tracking 151099 Panel mount bezel (not NEMA Type rated) 83564 Clear protective overlay (package of five) 77925* Revolution scale software, CD 165124 Installation manual Primary Replacement Components 161048 Overlay, 482 6-key, green window 161049 Overlay, 482 Plus with numeric keys, green window 153776 Display board, LCD 131316 Power supply, 85-265 VAC 131318 CPU board 131319 A/D board ®

* Revolution can be downloaded for free at www.ricelake.com

www.ricelake.com | Phone: 800-472-6703

131340

720i Series ™

Programmable Weight Indicator/Controller

INDICATORS / CONTROLLERS

Specifications Power: Line voltages: 100–240 VAC Frequency: 50-60 Hz DC voltages: 12–24 VDC Power consumption: 25 W

Excitation Voltage: 10 VDC, 8 x 350Ω or 16 x 700Ω load cells

Analog Signal Input Range: -10 mV to +45 mV

Analog Signal Sensitivity: 0.3 µV/graduation minimum at 7.5 Hz 1.0 µV/graduation typical at 120 Hz (manual only) 4.0 µV/graduation typical at 960 Hz (manual only) 1.0 µV/graduation recommended

A/D Sample Rate: 7.5 to 960 Hz, software selectable

Resolution:

Universal

Internal: 8 million counts/8,000,000 23 bit Display: 9,999,999

System Linearity / PI Rating: ±0.01% full scale

Digital I/O:

Standard Features

Eight channels on CPU board; optional 24-channel I/O

Approvals

www.ricelake.com | Phone: 800-472-6703

• LCD display size: panel mount (3.8 in x 1.2 in), universal (5.3 in x 1.5 in) • Four softkeys • Truck in/out, 1,000-ID memory • Process control engine ProAction PCE define conditions and actions • Data storage onboard, ProAction DBE user-defined • Eight digital I/O (expandable) • One option slot for pluggable options • 20 auxiliary print formats • Time & date • Audit trail tracking and alibi storage • Peak hold • Rate of change • Accumulator • Multi-range/interval • Local/remote • Two full duplex serial ports • One PS-2 keyboard port • Header for fiber optic, Ethernet or USB • Configurable with Revolution software

Communication Ports: Two ports on CPU board support up to 115,200 bps Port 2: Full duplex RS-232 with handshaking Port 4: Full duplex RS-232, simplex 20mA Keyboard port hard wired (Scan Code 1) Optional dual-channel serial expansion boards available Channel A: RS-232, RS-485, 20 mA Channel B: RS-232, 20 mA

Display: Panel Mount: 3.8 in x 1.2 in (96 mm x 30 mm) Universal: 5.3 in x 1.5 in (133 mm x 39 mm) 240 x 64 pixel, Transflective LCD with adjustable contrast

Keys/Buttons: Measurement Canada Approved

Ten-key (panel mount) membrane panel 22- key (universal mount) membrane panel tactile feel Optional keyboard connection supported

Temperature Range Certified: 14°F to 104°F (-10°C to 40˚C) Operating: 14°F to 122°F (-10°C to 50˚C)

Weight: Universal enclosure: 9.5 lb (4.3 kg) Panel Mount enclosure: 8.5 lb (3.9 kg)

Optional Communication:

Rating/Material:

• Ethernet TCP/IP • RS-485 4 wire • Fiber optic • USB • Wi-Fi • Network Protocols

NEMA Type 4X/IP66, stainless steel

Warranty: Two-year limited warranty

EMC Immunity: EN 50082 Part 2 IEC EN 61000-4-2, 3, 4, 5, 6, 8, and 11

Approvals: NTEP CC 08-022, Class III/IIL 10,000d Measurement Canada AM-5677C Class III/IIIHD 10,000d OIML R76/1992-GB1-10.09 Class III 10,000d EU Test Certificate GB-1380 Class III 10,000d CE Marked UL/cUL Listed (universal) UL/cUL Recognized (panel mount)

514

Panel Mount

CPU Enclosure

720i Series ™

Part Number/Price Part #

PCE Software 720i Universal, 115 VAC 101230† 103459†† 720i Universal, 115–230 VAC, CE/OIML 107708* 720i Universal, 12–24 VDC 101229** 720i Panel Mount ,115–230 VAC 119116** 720i Panel Mount, 115–230 VAC, CE/OIML 107710* 720i Panel Mount, 12–24 VDC Batch Software 720i Universal, 115 VAC 115447† 115448†† 720i Universal, 115–230 VAC, CE/OIML 115449** 720i Panel Mount, 115–230 VAC

† NEMA 5-15 plug

12 lb 12 lb 12 lb

†† CEE 7/7 plug (Euro)

Options/Accessories Part #

12 lb 12 lb 12 lb 12 lb 12 lb 12 lb

*DC/DC converter installed option, not UL approved **Power cord sold separately

Est. Weight

Description

Option Cards 67601 Digital I/O, 24-channel 67602 Analog output: selectable 0-10 V, 0-20 mA 67604 Serial, dual channel 93245 USB Port (PC connection only-replaces serial port 2) Network Cards 77142 Ethernet TCP/IP Port (replaces serial port 2) 71986 Ethernet TCP/IP module (installed in option slot) 108671 Wireless LAN Card 802.11 A/B (replaces serial port 2) 87803 EtherNet/IP 68539 Remote I/O interface 68540 Profibus DP interface 68541 DeviceNet interface Hardware 15436 Power cord for panel mount NEMA Type 5-15 plug 105382 Power cord for panel mount CEE 7/7 plug 93359 PS/2 keyboard 19369 Start/stop switch box 83570 Clear protective overlay (package of five) 118975 Panel mount kit, for universal 101923 Remote relay box, does not include relay Manuals & Software 103121 Installation manual 104033 720i toolkit CD 107622 720i ProAction Simulator CD Primary Component Parts 106788 CPU board assembly 101244 LCD Display (panel mount) transflective 102888 LCD Display (universal) transflective 101239 Display board (includes display for panel mount) 102887 Display board (w/o display for universal) 67613 AC power supply 100-240 nominal, 25 watt 132791 DC/DC converter 12-24 VDC nominal, 25 watt 101256 Switch membrane for panel mount 101257 Switch membrane for universal

D E

INDICATORS / CONTROLLERS

Programmable Weight Indicator/Controller

720i Panel Mount Display Dimensions A 7.36 in (187 mm) B 1.60 in (41 mm) C 0.59 in (15 mm)

D 2.45 in (62 mm) E 3.88 in (99 mm) F 0.62 in (16 mm)

G 6.12 in (155 mm)

720i Panel Mount CPU Enclosure (L x W x H): 12.75 x 6.05 x 2.14 in (324 x 154 x 5 mm)

™

H 720i Universal Dimensions A 10.50 in (267 mm) I B 7.25 in (184 mm) C 9.66 in (245 mm)

D 0.44 in (11 mm) E 3.51 in (89 mm) F 2.31 in (59 mm)

G 5.25 in (133 mm)

www.ricelake.com | Phone: 800-472-6703

B C

820i Series ™

Programmable Weight Indicator/Controller

INDICATORS / CONTROLLERS

Specifications Power: Line voltages: 100–240 VAC Frequency: 50-60 Hz DC voltages: 12–24 VDC Power consumption: 25 W

Excitation Voltage: 10 VDC, 8 x 350Ω or 16 x 700Ω load cells

Analog Signal Input Range: -10 mV to +45 mV

Analog Signal Sensitivity: 0.3 µV/graduation minimum at 7.5 Hz 1.0 µV/graduation typical at 120 Hz (manual only) 4.0 µV/graduation typical at 960 Hz (manual only) 1.0 µV/graduation recommended

A/D Sample Rate: 7.5 to 960 Hz, software selectable

Resolution: Internal: 8 million counts/8,000,000 23 bit Display: 9,999,999

System Linearity: ± 0.01% full scale

Digital I/O:

Standard Features

www.ricelake.com | Phone: 800-472-6703

• LCD backlit display (W x H) 4.6 in x 2.2 in • One small option slot and one large option slot for pluggable options • Weight display from 0.5 in to 0.75 in • Display up to two scales (scale 1, scale 2 and total) • Five user-defined softkeys • Weight or millivolt calibration with linearization and geographical compensation • NEMA Type 4X/IP66 stainless steel enclosure • Selectable A-D measurement rate up to 960/second • Power for 16, 350 ohm load cells • 100 setpoints, latched or free-running • Multi-range/Internal • Peak hold, rate of change • Audit trail tracking and Alibi software • 1000 - ID truck register for in/out weighing • User programmable 256 K flash memory • Onboard data storage 190 K • Downloadable programs • Visual programming for easily creating custom programs • Eight digital I/O (expandable) • Configurable with Revolution software ™

Optional Communication:

• Ethernet TCP/IP (serial port 2 header) • RS-485 four wire • Fiber optic • USB • Wi-Fi • Network Protocols

Approvals

Eight channels on CPU board; optional 24-channel I/O expansion boards available

Communication Ports: Two ports on CPU board support up to 115,200bps Port 2: Full duplex RS-232 with handshaking Port 4: Full duplex RS-232, 2-wire, RS-485, 20 mA output Keyboard port hard wired (scan code 1) Optional dual-channel serial expansion boards available Channel A: RS-232, RS-485, 20 mA Channel B: RS-232, 20 mA

Display: Measurement Canada Approved

Viewable area (W x H): 4.6 in x 2.2 in (116 mm x 55 mm), 320 x 156 pixel LCD with adjustable contrast Transmissive display Transflective display (optional)

Keys/Buttons: 28-key membrane panel, tactile feel, external keyboard support Optional keyboard connection supported

Temperature Range Certified: 14°F to 104°F (-10°C to 40˚C) Operating: 14°F to 122°F (-10°C to 50˚C)

Weight: 9.5 lb (4.3 kg)

Rating/Material: NEMA Type 4X/IP66, stainless steel

Warranty: Two-year limited warranty

EMC Immunity: EN 50082 Part 2 IEC EN 61000-4-2, 3, 4, 5, 6, 8, and 11

Approvals: NTEP CC 01-088, Class III/IIL 10,000d Measurement Canada AM-5426 Class III/IIIHD 10,000d OIML R76/1992-GB1-04.02, Class III 6,000d EU Test Certificate GB-1140 UL/cUL Listed ROHS compliant CE Marked

820i Series ™

Part Number/Price Part #

Est. Weight

Description

Single Channel 820i Universal, 115 VAC 91995† 91996† 820i Universal, 115–230 VAC 91997†† 820i Universal, 115–230 VAC CE/OIML 107711* 820i Universal, 12–24 VDC nominal Dual Channel 93011† 820i Universal, 115 VAC 820i Universal, 115–230 VAC 93012† 93013†† 820i Universal, 115–230 VAC CE/OIML

10 lb 10 lb 10 lb 10 lb

10 lb 10 lb 10 lb

D E

*DC/DC converter installed option, not UL approved

† NEMA 5-15 plug

†† CEE 7/7 plug (Euro)

INDICATORS / CONTROLLERS

Programmable Weight Indicator/Controller

820i Universal Dimensions

Options/Accessories Part #

Description

A 10.56 in (268 mm) B 2.28 in (58 mm)

Option Cards 67601 Digital I/O, 24-channel 67602 Analog output: selectable 0-10 V, 0-20 mA 103138 Analog output, dual channel 0-10 V, 0-20 mA 67604 Serial, dual channel 87697 Analog input +/-10 VDC, 0-20 mA & thermocouple 93245 USB Port (PC connection only-replaces serial port) Network Cards 77142 Ethernet TCP/IP Port (serial port 2 header) 65383 Ethernet thin server (external) 71986 Ethernet TCP/IP module (installed in option slot) 98057 Wireless LAN card 802.11 B/G (installed in option slot) 108671 Wireless LAN card 802.11 A/B (serial port 2 header) 68539 Remote I/O interface 68540 Profibus DP interface 68541 DeviceNet interface 87803 EtherNet/IP 103136 ControlNet interface Hardware 93359 PS/2 keyboard 83569 Clear protective overlay (package of 5) 19369 Start/stop switch box 101923 Relay box enclosure, does not include relay Manuals and Software 93018 Installation manual 77925 Revolution scale software 93019 IRITE IDE software (version 1.0 included with indicator) Primary Component Parts 102331 CPU board assembly-single channel includes display 102333 CPU board assembly-dual channel includes display 93246 Display, transmissive blue 67613 AC power supply 100-240 nominal, 25 watt 132791 DC/DC converter, 12-24 VDC, nominal, 25 watt 93247 Switch panel membrane

C 8.5 in (216 mm) D 2.16 in (55 mm)

E 4.12 in (105 mm) F 4.5 in (127 mm)

™

www.ricelake.com | Phone: 800-472-6703

Relay products can be found on page 549

880/880 Plus Performance Series ™

Digital Weight Indicator/Controller

INDICATORS / CONTROLLERS

Specifications 880 Plus Universal

Power: Line voltages: 100-240 VAC Frequency: 50-60 Hz DC voltages: 12-24 VDC Power consumption: AC: 15 WDC: 20 W

Excitation Voltage: 10 VDC, 8 x 350Ω or 16 x 700Ω load cells

Analog Signal Input Range: -45 mV to 45 mV

Analog Signal Sensitivity: 0.3 μV/graduation minimum at 7.5 Hz; 1.0 µV/graduation typical at 120 Hz (manual only) 4.0 µV/graduation typical at 960 Hz (manual only) 1.0 µV/graduation recommended

880 Panel Mount

A/D Sample Rate: 7.5 to 960 Hz, software selectable

Resolution: Board information: previous version green CPU board is 5.0" wide current version blue CPU board is 5.5" wide

Internal: Eight million counts 23 bit Display: 100,000

System Linearity: ± 0.01% full scale

Digital I/O:

Standard Features

www.ricelake.com | Phone: 800-472-6703

• LED display, 0.56 in (14 mm), six-digit, 14-segment • RS-232 or RS-485 serial port • USB device port connects directly to a PC • USB host port connects to a keyboard or flash drive • Ethernet TCP/IP polled or continuous • AC or DC models • Built-in DIN-rail clips on controller box (panel mount) • Display and controller can be separated up to 250 ft (panel mount) • Hardware slot for one option card • Operator functions through menu key for audit trail, preset tare, accumulator, time & date and setpoints • Audit trail tracking for configuration and calibration changes. Password protection for user and configuration changes. • 20 setpoints with latched batch engine or unlatched outputs • Four onboard digital I/O channels • Programmable ticket formats up to 1,000 characters for header text, gross, net, accumulator and setpoints • Local/remote operation • Multi-range or multi-interval weighing • Filter settings for light, medium and heavy noise Options/Accessories

• Metrological hardware sealing kit • Adapter plate for converting 310 A and 520 panel mounts • Panel mount kit for universal enclosure

Four dry contract relays; DC Max: 30 VDC at 3 amps; AC max: 250 VAC at 3 amps per contact

According to IEC 61784 (CPF-3/3) Up to 8 bytes of I/O data, 100 Mbps full duplex Ethernet

518

Gross, net, center of zero, standstill, lb, kg, tare, preset tare, multi-range 1/2/3

Display: LED, 0.56 in (14 mm), six-digit, 14-segment with decimal or comma

Keys/Buttons: Flat membrane panel, tactile feel

Temperature Range Certified: 14°F to 104°F (-10°C to 40°C) Operating: 14°F to 122°F (-10°C to 50°C)

Dimensions (W x H x D): Panel: 6 in x 4 in x 4.95 in (152 mm x 102 mm x 126 mm) Universal: 9.87 in x 9.38 in x 4.33 in (251 mm x 238 mm x 110 mm) Measurement Canada Approved

Weight: Panel: 2.5 lb (1.2 kg); Universal: 12 lb (5.4 kg)

Rating/Material: Display bezel NEMA Type 4X, IP69K Panel display: stainless steel Universal: stainless steel Controller box: aluminum

Warranty:

Approvals:

Relay Board:

Modbus/TCP Interface:

Status Annunciators:

EN 50082 Part 2 IEC EN 61000-4-2, 3, 4, 5, 6, 8, and 11

16-bit resolution, 0-10 VDC, 0-20 mA, 4-20 mA

According to EN 50325-2

RS-232 full duplex or RS-485 half duplex; USB micro A/B connector 2.0; Ethernet TCP/IP

EMC Immunity:

Analog Output:

Profinet Interface:

Communication Ports:

Two-year limited warranty

Specification Options

EtherNet/IP Interface:

Approvals

Four I/O onboard primary keys, pseudo functions, batching functions

NTEP CC 13-080 Class III/IIIL, 10,000d Measurement Canada AM-5931C Class III/IIIHD, 10,000d OIML R76/1992-GB1-04.02 Class III, 10,000d EU Test Certificate TC8463 UL/cUL Listed (universal) UL/cUL Recognized (panel mount) CE Marked

DeviceNet Interface: According to EN 50325-2

Profibus DP Interface: According to EN 50170 EtherCAT According to IEEE 802.3

880/880 Plus Performance Series ™

Part Number/Price Part #

Est. Weight

Description

880 Panel Mount AC Powered* 151674 Display only 177977 115-230 VAC, controller only 177976 115-230 VAC 177979 115-230 VAC with analog output 177980 115-230 VAC with relay board 177982 115-230 VAC with EtherNet/IP 177983 115-230 VAC with ProfiNet 177984 115-230 VAC with Modbus/TCP 177985 115-230 VAC with Profibus DP 177986 115-230 VAC with DeviceNet 179155 115-230 VAC with EtherCAT 880 Panel Mount DC Powered* 177987 12-24 VDC 177988 12-24 VDC controller only 880 Plus Universal AC Powered 177989† 115 VAC 178496† 115 VAC, with analog 178499† 115 VAC, with relay board 179147† 115 VAC with EtherNet/IP 179148† 115 VAC with Profinet 179149† 115 VAC with Modbus/TCP 179150† 115 VAC with Profibus 179152† 115 VAC with DeviceNet 179154† 115 VAC with EtherCAT 177990†† 115-230 VAC 178497†† 115-230 VAC with analog 178500†† 115-230 VAC, with relay board 880 Plus Universal DC Powered 178495 12-24 VDC

2 lb 4 lb 4 lb 4 lb 4 lb 4 lb 4 lb 4 lb 4 lb 4 lb 4 lb

Gross Brutto

Net

kg T PT R1

ZERO

TARE

UNITS

GROSS NET B/N

D 880 Panel Mount Dimensions A 6.0 in (152 mm) B 4.0 in (102 mm)

C 4.95 in (126 mm) D 0.58 in (14 mm) BEZEL DEPTH

4 lb 4 lb

INDICATORS / CONTROLLERS

Digital Weight Indicator/Controller

8 lb 8 lb 8 lb 8 lb 8 lb 8 lb 8 lb 8 lb 8 lb 8 lb 8 lb 8 lb

Gross Brutto

Net

kg T R1

ZERO

UNITS

TARE

GROSS NET B/N

C D

8 lb

† NEMA 5-15 plug

†† CEE 7/7 plug (Euro)

880 Universal Dimensions A B C

8.10 in (206 mm) 9.38 in (235 mm) 8.37 in (213 mm)

D E

Options/Accessories

Part #

Description

Option Cards (5.5 in CPU only) 179156 Analog output, 0-10 VDC, 0-20 mA, 4-20 mA 179157 Relay board, four dry contact outputs Network Cards 179158 EtherCAT interface 179159 EtherNet/IP interface 179160 ProfiNet interface 179161 Modbus/TCP interface 179162 DeviceNet interface 179163 Profibus DP interface Hardware 153660 Metrological sealing kit 158404 Adapter plate for IQ310 and 520 replacement 101923 Relay box enclosure, does not include relay 177850 Panel mount kit for universal enclosure 180835 Backplate with RJ-45 receptacle 15436 Power cord, pigtail with US NEMA 5-15 plug 105382 Power cord, pigtail with Euro Plug CEE 7/7 ®

9.87 in (248 mm) 4.0 in (102 mm)

Description

Cables 152434

Cable, USB A to micro A shielded, 2 meters Cable, Ethernet TCP/IP CAT.5E shielded RoHS compliant 156817 blue RJ45 connectors 1 meter Ethernet TCP/IP CAT.5E shielded RoHS compliant 156818 Cable, blue RJ45 connectors 3 meters 156821 Cable, Ethernet TCP/IP CAT.5E shielded RoHS compliant blue RJ45 connectors 5 meters Manuals and Software 77925 Revolution scale software 152240 Operators manual 158387 Technical manual Primary Component Parts (5.5 in CPU only) 131740 Overlay, panel mount, six-key 163986 Overlay, universal with numeric keypad 131598 Display board 175603* Power supply, 100-240 VAC 175604* Power supply, 12-24 VDC 175109* CPU board ™

www.ricelake.com | Phone: 800-472-6703

*Power cable not included

* Design change in 2017 to 5.5 in wide controller, see replacement parts catalog 5.0 inch wide boards.

INDICATORS / CONTROLLERS www.ricelake.com | Phone: 800-472-6703

920i Series ®

Specifications Power:

Approvals

AC voltages: 100-240 VAC Frequency: 50-60 Hz DC voltages: 12-24 VDC Consumption: AC: 25 W universal, 65 W panel & wall mount DC: 25 W

Excitation Voltage: 10 ± VDC 8 x 350Ω or 16 x 700Ω load cells per A/D card

Analog Signal Input Range: -45 mV to +45 mV

Analog Signal Sensitivity: 0.3 µV/graduation minimum at 7.5 Hz 1.0 µV/graduation recommended

INDICATORS / CONTROLLERS

Programmable Weight Indicator/Controller

A/D Sample Rate: 7.5 to 960 Hz, software selectable

Resolution:

Measurement Canada Approved

Internal: 8 million counts Display: 9,999,999

System Linearity: ± 0.01% full scale Six I/O channels on CPU board; optional 24-channel I/O expansion boards available

Communication Ports: Four ports on CPU board support up to 115,200bps Port 1: Full duplex RS-232 Port 2: RS-232 with CTS/RTS; PS/2 keyboard interface via DB-9 connector Port 3: Full duplex RS-232, 20mA output Port 4: Full duplex RS-232, 2-wire RS-485, 20mA output Optional dual-channel serial expansion boards available Channel A: RS-232, RS-485, 20 mA Channel B: RS-232, 20 mA

Display: (W x H) 4.6 in x 3.4 in (116 mm x 86 mm), 320 x 240 pixel LCD module with adjustable contrast. Transmissive display Transflective display (optional)

Keys/Buttons: 27-key membrane panel, tactile feel, PS/2 port for external keyboard connection

Temperature Range Certified: 14°F to 104°F (-10°C to +40˚C) Operating: 14°F to 122°F (-10°C to +50˚C)

Weight: Universal enclosure: 9.5 lb (4.3 kg) Wall mount enclosure: 23.0 lb (10.4 kg) Panel mount enclosure: 8.5 lb (3.9 kg) Deep universal: 11 lb (5.0 kg)

Rating/Material: NEMA Type 4X/IP66, stainless steel

Warranty: Two-year limited warranty

Standard Features

USB Standard Features

• LCD display, (W x H) 4.6 in x 3.4 in • Selectable character sizes from 0.25 in to 1.2 in • 60 configurable operator prompts • Display up to four scale channels per screen with required Legal for Trade information • 32 scale accumulators • Five softkeys with 10 user-defined, 14 preset functions per screen • Ten programmable display screens • Millivolt calibration, 5-point linearization and geographical calibration • NEMA Type 4X/IP66 stainless steel enclosure • Selectable A/D measurement rate up to 960/second • 100 setpoints, 30 configurable setpoint types • Two slots for option cards • 1,000-ID truck register for in/out weighing • 64 K user on-board NV RAM • User programmable 128 K flash memory • Reflash memory to upgrade firmware • Power for 16, 350 ohms load cells per A/D board • Local-remote indicators • Multi range/interval • Alibi storage • Audit trail tracking • Peak hold • Rate of change

• USB interface card on Port 2 • The USB card is supported on Rev L CPU boards or later • The 920i for USB interface requires firmware version 5.0 or higher

™

Connector Types:

• Standard Type A: 920i connects to keyboard, ASCII font label ticket printers and flash drives • Standard Type B: 920i connects to PC USB Interface Functions:

• Supports weigh mode and configuration mode functions • Supports upload of databases and .920 configuration file • Supports download of databases, .920 configuration file, iRite, COD file and firmware file • Sanity checks for command errors Flash Drives:

• Supports USB 2.0 • Create sub directories by unit ID and database name • Use the root directory for generic files Optional Washdown Connectors page 524

• Sealed receptacle • Connectors - cables • USB cover - flash drive and receptacle

www.ricelake.com | Phone: 800-472-6703

Digital I/O:

EMC Immunity: EN 50082 Part 2 IEC EN 61000-4-2, 3, 4, 5, 6, 8, and 11

Approvals: NTEP CC 01-088, Class III/IIIL 10,000d Measurement Canada AM-5426, Class III/III HD 10,000d OIML approved 6,000/10,000, UK 2658 UL/cUL Listed (universal, deep and wall mount enclosure) UL/cUL Recognized (panel mount) UL/cUL Listed 508A (custom wall mount) CE Marked

521

920i Series ®

Programmable Weight Indicator/Controller

INDICATORS / CONTROLLERS

920i Universal Part Number/Price Part #

Description

USB

www.ricelake.com | Phone: 800-472-6703

Single-Channel 67527 115 VAC† 115003 115 VAC† 67615 230 VAC† 120062 230 VAC† 69522 230 VAC†† 120074 230 VAC†† 107713* 9-36 VDC, 25 watt 120080* 9-36 VDC, 25 watt Dual-Channel 69767 115 VAC† 120086 115 VAC† 69772 230 VAC† 120090 230 VAC† 69774 230 VAC†† 120096 230 VAC†† No A/D Channel 77790 115 VAC† 120100 115 VAC† 77791 230 VAC†† 120104 230 VAC††

USB USB USB USB

USB USB USB

USB USB

920i Deep Universal Part Number/Price

Est. Weight

10 lb 10 lb 10 lb 10 lb 10 lb 10 lb 10 lb 10 lb 10 lb 10 lb

12.50 in (318 mm) 10.56 in (268 mm) 10.80 in (203 mm)

D I E F

12 lb 12 lb 12 lb 12 lb 12 lb 12 lb 12 lb 12 lb

USB USB USB USB

12 lb 12 lb 12 lb 12 lb 12 lb 12 lb

USB USB USB

12 lb 12 lb 12 lb 12 lb

USB USB † NEMA 5-15 plug

†† CEE 7/7 plug (Euro)

A B

F E

H 4.61 in (117 mm) K G J 10.87 in (276 mm)L H 8.50 in (216 mm)

A B C

Est. Weight

† NEMA 5-15 plug

A B

920i Universal Dimensions

USB

*DC/DC converter installed option, not UL approved

*DC/DC converter installed option, not UL approved †† CEE 7/7 plug (Euro)

Description

Single-Channel 82455 115 VAC† 115004 115 VAC† 82457 230 VAC† 120064 230 VAC† 82459 230 VAC†† 120075 230 VAC†† 107714* 9-36 VDC, 25 watt 120081* 9-36 VDC, 25 watt Dual-Channel 82456 115 VAC† 120087 115 VAC† 82458 230 VAC† 120092 230 VAC† 82460 230 VAC†† 120097 230 VAC†† No A/D Channel 93243 115 VAC† 120101 115 VAC† 93244 230 VAC†† 120105 230 VAC††

10 lb 10 lb 10 lb 10 lb 10 lb 10 lb 10 lb 10 lb

522

Part #

920i Universal Dimensions 0.14 in (3,5 mm) 5.25 in (206 mm)

A B C

12.50 in (318 mm) 10.56 in (268 mm) 10.80 in (203 mm)

D E

5.36 in (216 mm) 10.87 in (61 mm)

F H

8.50 in (216 mm) 5.88 in (7 mm) 4X

920i Series ®

920i Wall Mount Part Number/Price Description

USB

Single-Channel 69763 115 VAC† 115005 115 VAC† 69765 230 VAC† 120066 230 VAC† 72133 230 VAC†† 120078 230 VAC†† 107715* 9-36 VDC 120082* 9-36 VDC Dual-Channel 69770 115 VAC† 120088 115 VAC† 69776 230 VAC† 120093 230 VAC† 72134 230 VAC†† 120098 230 VAC†† No A/D Channel 77794 115 VAC† 120102 115 VAC† 77795 230 VAC†† 120106 230 VAC††

920i Panel Mount Part Number/Price

Est. Weight

Part #

USB USB USB

23 lb 23 lb 23 lb 23 lb 23 lb 23 lb

USB USB USB

23 lb 23 lb 23 lb 23 lb

USB USB

*DC/DC converter installed option, not UL approved

USB USB USB USB

USB USB USB

USB USB

Est. Weight 9 lb 9 lb 9 lb 9 lb 9 lb 9 lb 9 lb 9 lb 9 lb 9 lb 9 lb 9 lb 9 lb 9 lb 9 lb 9 lb 9 lb 9 lb

*DC/DC converter installed option, not UL approved

†† CEE 7/7 plug (Euro)

† NEMA 5-15 plug

†† CEE 7/7 plug (Euro)

USB

Single-Channel 69764 115 VAC† 115006 115 VAC† 69766 230 VAC† 120069 230 VAC† 72137 230 VAC†† 120079 230 VAC†† 107716* 9-36 VDC 120083* 9-36 VDC Dual-Channel 69771 115 VAC† 120089 115 VAC† 69777 230 VAC† 120095 230 VAC† 72138 230 VAC†† 120099 230 VAC†† No A/D Channel 77792 115 VAC† 120103 115 VAC† 77793 230 VAC†† 120107 230 VAC††

23 lb 23 lb 23 lb 23 lb 23 lb 23 lb 23 lb 23 lb

USB

Description

www.ricelake.com | Phone: 800-472-6703

Part #

INDICATORS / CONTROLLERS

Programmable Weight Indicator/Controller

† NEMA 5-15 plug

C D

920i Panel Mount Dimensions

920i Wall Mount Dimensions A B C

14.30 in (363 mm) 11.00 in (279 mm) 18.00 in (457 mm)

D E

18.84 in (479 mm) 19.63 in (499 mm)

F G

14.00 in (356 mm) 6.75 in (171 mm)

A B

11.56 in (294 mm) 9.16 in (233 mm)

C D

5.20 in (132 mm) 7.95 in (202 mm)

523

920i Series ®

Programmable Weight Indicator/Controller

INDICATORS / CONTROLLERS

Options/Accessories

Part #

Description

Option Cards 68532 A/D, single-channel 68533 A/D, dual-channel 67600 Memory, 1 MB NV RAM 67601 Digital I/O, 24-channel TTL output 67602 Analog output: selectable 0-10 V, 0-20 mA 103138 Analog output, dual-channel 0-10 V, 0-20 mA 67603 Pulse input, single-channel 67604 Serial port card, dual-channel, RS-232 and RS-485 87697 Analog input +/-10 VDC, 0-20 mA and thermocouple Network Cards 65383 Ethernet Thin Server (external) Ethernet TCP/IP 10/100 Base-T module (internal) 71986 page 565 Ethernet TCP/IP, wireless LAN card 802.11 B/G 98057 page 565 87803 EtherNet/IP page 565 68539 Remote I/O interface page 563 68540 Profibus DP interface page 563 68541 DeviceNet interface page 564 103136 ControlNet interface page 564 Expansion Cards 69782 Two-slot expansion board (wall mount) Two-slot expansion board (panel mount and 71743 deep universal) 179488 Two-slot expansion board (wall mount DC powered) Two-slot expansion board (deep universal and panel 180047 mount, DC powered) 69783 Six-slot expansion board (wall mount) Hardware 83569 Clear protective overlay (package of 5) 70056 Cable, DB9M to DB9F, Straight Cable 93359 Keyboard, QUERTY PS/2 99149 Keyboard, QWERTY 109-key USB, flexible, washable 77788 Fiber optic board, installed in 920i 92777 Filter, PreVent vent kit PG 7 cord grip 19368 Start/stop controls without box, for use on wall mount 19369 Start/stop switch with FRP box Manuals and Software 69781 iRev scale software 72809 920i interchange database software 67887 Additional installation manual 67888 Additional programming reference Primary Component Parts 186272*** CPU board assembly for LED backlight 186275*** Display board, LED back light, transmissive 186276*** Display board, LED back light, transflective 67613 AC power supply, 25 watt for universal 71333 Power supply, 65 watt for deep, panel and wall mount 132791 Power supply 12-24 VDC, 25 watt 66502 Switch panel membrane ®

™

www.ricelake.com | Phone: 800-472-6703

™

Description

USB Cable Options Note: Connector is a male plug

Connector Type Sealed A B

Unsealed A B

Unsealed connectors X X USB-A to USB-B, 2 m cable Sealed connectors, 124700 X X USB-A to USB-B, 3 m IP68 cable Sealed connector USB-A to 126477 unsealed connector USB-A, 3 m X X IP68 cable Sealed connector USB-A to 124701 unsealed connector USB-B, 3 m X X IP68 cable Sealed connector USB-B to 124702 unsealed connector USB-A, 3 m X X IP68 cable 124695 Panel plug 1.125 in diameter USB Receptacles Sealed Unsealed Note: Receptacle is a socket Sealed receptacle USB-A for wall 126476 X X mount, 0.5 m cable Sealed receptacle USB-A to 124703 unsealed connector USB-B , 0.5 m X X cable Sealed receptacle USB-B to 124704 unsealed connector USB-B , 0.5 m X X cable Sealed receptacle USB-A to five-pin 125998* connector, 0.28 m cable (internal X to 920i) Sealed receptacle USB-B to five-pin 125999* connector, 0.28 m cable (internal X to 920i) 124694 Cover for sealed receptacles 124689 Cover for flash driver mounts on sealed receptacle 125077 Rice Lake USB flash drive, 1 GB Ethernet Cables Sealed Unsealed 124706 Sealed to sealed, 3 m cable X Sealed to unsealed connector, 124707 X X 3 m cable Ethernet Receptacles Sealed Unsealed RJ-45 receptacle sealed, 0.28 m 126353* internal to 920i (requires Ethernet X TCP/IP option installed) 79074

*These options require a milled back plate which has two cutouts. If ordering only o receptacle, a plug (PN 124695) is required for the second cutout. USB enclosure parts with cutout: PN 119891 (Universal) PN 115118 (Universal Deep) PN 126585 (Wall Mount)

Unsealed Connectors

Type B

***Design change in 2018 to LED backlight display. See replacement parts for CC display and CPU board Rev N or older. The LED backlight display can be used with CPU board Rev N or older by replacing the power supply cable. PN 186464 for Universal, PN 186278 for Panel or Deep, PN 186760 for Wall mount.

Type A Sealed Connector

Sealed Receptacle

920i Series ®

Grayhill Relays and Racks Part #

Description

52332 52318 52319 52331 52316 52317 71376

Two-channel input relay, 2.5-28 VDC Two-channel input relay, 120 VAC Two-channel input relay, 240 VAC Two-channel input relay, 10-32 VDC Two-channel output relay, 120-140 VAC at 2 amp Two-channel output relay, 240-280 VAC at 7 amp Two-channel output relay, 3-60 VDC at 1 amp Two-channel output relay, 0-200 VDC/VAC at 1.5 A/10 W (dry contact) Two-channel output relay, inductive load, 120-140 VAC at 2 A Two-channel output relay, inductive load, 240-280 VAC at 2 A Fuse, 3.15 amp, Grayhill Eight-channel relay rack, panel mount and wall mount, requires 50-Pin flat or round ribbon cable - 4 slots 16-channel relay rack, panel mount and wall mount, requires 50-Pin flat or round ribbon cable - 8 slots 24-channel relay rack, panel mount and wall mount, requires 50-Pin flat or round ribbon cable - 12 slots Jumper strap, 10 position for Grayhill Digital input 5 VDC, 15-30 VAC/10-32 VDC Digital output 5VDC, 3-60 VDC Cable, 50-Pin flat ribbon for digital I/O Cable, 50-Pin round ribbon for digital I/O with cord grip Cable, 50-Pin round ribbon for digital I/O without cord grip

71377 84698 84699 54215 52312 52314 52315 46189 108396 108397 70780 70779 72442

8-channel relay rack PN 52312

INDICATORS / CONTROLLERS

Programmable Weight Indicator/Controller

16-channel relay rack PN 52314

OPTO 22 Relays and Racks Description

15969 15970 22848 15971 15972 22847 36632 36631 16478 101923 15973 45408 99032 26834 21735

G4IDC5 10-32 VDC input relay module, white (N/O) G40DC5R dry contact 100 VDC/1.5 A output, red (N/O) G40DC5R5 dry contact 100 VDC/1.5 A output, red (N/C) G40AC5 115 VAC output relay module, black (N/O) G4IAC5 115 VAC input relay module, yellow (N/O) G40AC5A5 115/230 VAC output relay module, black (N/C) G40AC5A 115/230 VAC output relay module, black (N/O) G4IAC5A 230 VAC input relay module, yellow (N/O) Quencharc arc suppressor FRP enclosure with Opto four-channel rack Four-channel relay rack, 3.25 x 3.25 in Four-channel relay rack 6.1 x 1.2 in Adapter plate, for four-channel Opto rack 33490 Fuse, 1A 250V (for PN 15970 and PN 22848) Fuse, 4A 250V (for PN 15971, PN 22847 and PN 36632)

24-channel relay rack PN 52315

OPTO 22 G4 PN-15973

www.ricelake.com | Phone: 800-472-6703

Part #

OPTO 22 G4 PN-45408

1280 Enterprise Series

Programmable Color Touchscreen Weight Indicator/Controller

Specifications

INDICATORS / CONTROLLERS

Wall Mount

Power: AC voltages: 100-240 VAC; 50-60 Hz DC voltages: 11-30 VDC Consumption: 60 W

Excitation Voltage: 10 ± 0.5 VDC 16 x 350Ω or 16 x 700Ω load cells per A/D card

Analog Signal Input Range: -60 mV to 60 mV

Analog Signal Sensitivity: 0.3 μV/graduation minimum at 7.5 Hz–120 Hz 1.0 µV/graduation recommended

Panel Mount

A/D Sample Rate: 7.5 to 960 Hz, software selectable

Resolution: Internal: 8 million counts Display: 9,999,999

Universal

System Linearity ± 0.01% full scale

Digital I/O: Eight I/O channels on CPU board; optional serial ports: 24-channel I/O expansion boards available

Standard Features

www.ricelake.com | Phone: 800-472-6703

526

• Seven-inch, 800 x 480 pixel, graphical color display that adjusts for ambient light conditions • Twelve-inch, 1280 x 800 pixel, graphical color display that adjusts for ambient light conditions • Highly customizable graphical user interface • Three different enclosure types: universal with tilt stand, panel mount and wall mount • Resistive color touchscreen that can be used with gloves • On-screen keyboard available during entry mode or use an external keyboard • Multi-language operation and text entry • Keypad for scale operations, numeric entry and navigation • More than 150 built-in functions for programming • Customize applications and data tables with iRite™ software • Built-in web server for remote access, systems integration and data monitoring • Up to eight scales supporting five scale types: – Analog load cell scales – Total scales – Serial scales – Program scales – iQube2 scales • Multi-range/interval weighing functions • Eight digital I/O for control and pulse count • 100 setpoints, 18 configurable setpoint types • 22 soft keys with 10 user-defined • Two RS-232 and RS-485 serial ports • USB, Ethernet TCP/IP, Wi-Fi Direct(r) and Bluetooth ports ®

Options • Six option slots that support: • A/D scale channels • Analog Input/Thermocouple • Digital input and outputs • Analog outputs • Serial ports • Four channel dry-contact relay • Various protocol interfaces

Approvals*

Communication Ports: Port 1 & 2: Full duplex RS-232 with CTS/RTS, RS-422/485 Baud Rate: 1200 to 115200 Port 3: USB 2.0 Device (Micro) Port 4: Bluetooth® SPP 2.1+EDR, Standards 4Mbaud USB Host: (2) Type A Connectors max 500 mA Ethernet: Wired 10/100 Auto-MDX Ethernet: Wireless 802.11 b/g/n 2.4GHz

Onboard: Selectable filters: Three stage, Adaptive or Damping Embedded Linux® OS 8 GB eMMC (system use) 1 GB DDR3 RAM 460 MB onboard database (SQLite) storage Up to 32 GB micro SD card (sold separately)

Display: Measurement Canada Approved

Seven-inch, 800 x 480 pixel, graphical color TFT display 500 or 1000 NIT Twelve-inch, 1280 x 800 pixel, graphical color TFT display 1500 NIT

Keys/Buttons: 22-key membrane panel, tactile buttons, on-screen keyboard for text and numeric entry, USB port for flash drive, keyboard and printer

* Touch-only units pending approvals

Temperature Range Certified: 14°F to 104°F (-10°C to 40˚C) Operating: -4°F to 131°F (-20°C to 55˚C)

Weight: Universal enclosure: 11 lb (4.9 kg) Panel mount enclosure: 8 lb (3.6 kg) Wall mount enclosure: 23 lb (10.4 kg) Panel mount 7 in touch-only enclosure: 7 lb (3.1 kg) Panel mount 12 in touch-only enclosure: 10 lb (4.5 kg)

Rating/Material: IP66 stainless steel wall enclosure IP69K stainless steel universal and panel mount door

Warranty: Two-year limited warranty

EMC Immunity: EN 50082 Part 2 IEC EN 61000-4-2, 3, 4, 5, 6, 8, and 11

Approvals: NTEP CC 15-00/Class III/IIIL 10,000d Measurement Canada AM-5980C, Class III/III HD 10,000d OIML R76/2006-NL1-16.04 Class III/IIII 10,000d EU Test Certificate TC8596 UL/cUL Listed (universal) UL/cUL Recognized (panel mount) CE Marked

1280 Enterprise Series

INDICATORS / CONTROLLERS

Programmable Color Touchscreen Weight Indicator/Controller

7-inch model with keypad

7-inch touch-only model

12-inch touch-only model

Numeric Keypad Models: A A

1280-2

1280-3

1280-4

Universal (1280-2) Dimensions

Wall Mount (1280-3) Dimensions

Panel Mount (1280-4) Dimensions

A C E G

A 9.00 in (229 mm) C 0.58 in (15 mm) E 0.32 in (8 mm)

10.86 in (276 mm) 9.24 in (235 mm) 9.00 in (229 mm) 5.25 in (133 mm)

B 6.22 in (158 mm) D 4.97 in (126 mm) F 12.50 in (318 mm)

14.92 in (379 mm) 18.22 in (463 mm) 19.64 in (499 mm) 8.08 in (205 mm)

B 11 in (279 mm) D 18.84 in (479 mm) F 14.20 in (361 mm)

B 9.00 in (229 mm) D 5.34 in (136 mm)

Touch-only Models:

A A

www.ricelake.com | Phone: 800-472-6703

B B

1280-5

1280-6

7-inch Touch-only (1280-5) Dimensions

12-inch Touch-only (1280-6) Dimensions

9.00 in (229 mm)

6.22 in (158 mm)

14.00 in (356 mm)

10 in (254 mm)

527

1280 Enterprise Series

Programmable Color Touchscreen Weight Indicator/Controller

INDICATORS / CONTROLLERS

Generate a 1280 Enterprise Series Model Reference Code This reference number can be used at time of ordering.

ENCLOSURE TYPE Universal (1280-2)

Panel (1280-4)

2 3

Wall (1280-3)

Touch-only Panel 7 in (1280-5)

POWER TYPE 1

CORD TYPE 1 – 3 4

Touch-only Panel 12 in (1280-6)

DISPLAY TYPE

NEMA 5-15 Universal

None

CEE 7/7 Universal

NEMA 5-15 Wall CEE 7/7 Wall

4 5

500NIT 7 in Unviersal 1000NIT 7 in Universal 500NIT 7 in Panel/Wall 1000NIT 7 in Panel/Wall 1500NIT 12 in Panel

OPTION CARDS ALL SLOTS MUST BE FILLED A

Blank

If no option, controller will need 6 blanks

Single A/D Scale

Dual A/D Scale

24 Channel Digital I/0

Dual Serial Channel

4-dry Contact Relay

Single Analog Out

Dual Analog Out

Analog Input / Thermocouple

EtherNet/IP

DeviceNet

ProfiNet

Modbus TCP

Profibus DP

EtherCat

PowerLink

Part Number Part #

Reference #

Description

www.ricelake.com | Phone: 800-472-6703

Universal Enclosure with 500 NIT Display (1280-2) 1111BAAAAA 1280 Universal 171427† 171441†† 1131BAAAAA 1280 Universal 1111CAAAAA 1280 Universal 171662† 1131CAAAAA 1280 Universal 172188†† Panel Mount Enclosure with 500 NIT Display (1280-4) 171663 21-3BAAAAA 1280 Panel Mount 172186 21-3CAAAAA 1280 Panel Mount Wall Mount Enclosure with 500 NIT Display (1280-3) 3143BAAAAA 1280 Wall Mount 173673† 174143†† 3153BAAAAA 1280 Wall Mount 3143CAAAAA 1280 Wall Mount 174144† 3153CAAAAA 1280 Wall Mount 174145†† Wall Mount Enclosure with 1000 NIT Display (1280-3) 3144BAAAAA 1280 Wall Mount 172184† 3154BAAAAA 1280 Wall Mount 172185†† 3144CAAAAA 1280 Wall Mount 173806† 172187†† 3154CAAAAA 1280 Wall Mount Touch-only 7 inch with 500 NIT Display (1280-5) 186618 41-3BAAAAA 1280 Touch-only 7 in Touch-only 12 inch with 1500 NIT Display (1280-6) 186465 51-5BAAAAA 1280 Touch-only 12 in

† NEMA 5-15 plug

Power

Display

Option Installed

115 VAC 100-240 VAC 115 VAC 100-240 VAC

500 NIT 500 NIT 500 NIT 500 NIT

Single Scale Card Single Scale Card Dual Scale Card Dual Scale Card

100-240 VAC 100-240 VAC

500 NIT 500 NIT

Single Scale Card Dual Scale Card

115 VAC 100-240 VAC 115 VAC 100-240 VAC

500 NIT 500 NIT 500 NIT 500 NIT

Single Scale Card Single Scale Card Dual Scale Card Dual Scale Card

115 VAC 100-240 VAC 115 VAC 100-240 VAC

1000 NIT 1000 NIT 1000 NIT 1000 NIT

Single Scale Card Single Scale Card Dual Scale Card Dual Scale Card

100-240 VAC

500 NIT

Single Scale Card

100-240 VAC

1500 NIT

Single Scale Card

†† CEE 7/7 plug (Euro)

1280 Enterprise Series

Programmable Color Touchscreen Weight Indicator/Controller

Dual A/D Scale

Digital I/O

Excitation Voltage: 10 VDC bi-polar, 4 or 6 wire sensing 16 x 350 ohms per channel Analog Input Signal: -10 to +40 mV

Part #

Description

164085 163407 166957

Single scale A/D Board only A/D sealing kit

Data Exchange with PLC/DCS Systems EtherNet/IP

Description

164683 160760 166957

Dual scale A/D Board only A/D sealing kit

24 channels, configurable as inputs or outputs Inputs: 5 VDC max, active low; Outputs: 20 mA max per channel, active low; 5 VDC source available: 500 mA max

Part #

Description

164684 160761

Digital I/O Board only

Single Analog Out

Dual Analog Out

Relay Card

Analog Input / Thermocouple

Description

164685 162930

Dual serial channel Board only

16 bit, voltage output 0-10 VDC,current output 0-20mA, 4-20mA

Part #

Description

165366 164704

Single analog out Board only

16 bit, voltage output 0-10 VDC, current output 0-20mA, 4-20mA

Part #

Description

164686 162931

Dual analog out Board only

Description

164689 164974

Relay card Board only

Description

165793 152360 164756

DeviceNet DeviceNet module only Host board only

Part #

Description

165794 152355 164756

Profinet Profinet module only Host board only

Part #

Description

165796 152359 164756

Modbus TCP Modbus TCP module only Host board only

Part #

Description

165795 152358 164756

Profibus DP Profibus module only Host board only

Part #

Description

179533 163295 164756

EtherCAT Module, EtherCAT Host board only

Part #

Description

182319 183004 164756

PowerLink PowerLink module only Host board only

Profibus DP

EtherCAT

PowerLink

Relay four-dry contact, max current 3A @ 30 VDC, 3A @250VAC

Part #

Modbus TCP

RTS, RS-485 or RS-422, 1200-115200 baud

Part #

EtherNet/IP EtherNet/IP Module only Host board only

Profinet

For 24 I/O ribbon cable required.

Dual Serial Channel Two-channel, full duplex RS-232 with CTS/

Description

165792 152357 164756

DeviceNet

Excitation Voltage: 10 VDC bi-polar, 4 or 6 wire sensing 8 x 350 ohms per channel Analog Input Signal: -10 to +40 mV

Part #

INDICATORS / CONTROLLERS

www.ricelake.com | Phone: 800-472-6703

Single A/D Scale

Analog Input Signal: ±10 VDC, ±100 mV, 0-20 mA Thermocouple Types: E, J, K, N, T

Part #

Description

164687 162932

Dual analog input Board only

1280 Enterprise Series

Programmable Color Touchscreen Weight Indicator/Controller

INDICATORS / CONTROLLERS

Grayhill Relays and Racks

Options

Part # Description

52332 52318 52319 52331 52316 52317 71376

Primary Component Parts 163400 7 in 500 NIT display 163399 7 in 1000 NIT display 182992 12 in 1500 NIT display 160757* CPU board assembly 160758 Back Plane board assembly 162693 AC power supply board 162694 DC power supply board 164121 Overlay, keypad, for panel & wall mount 164120 Overlay, touchscreen, for panel & wall mount 161731 Overlay, keypad, for universal 161730 Overlay, touchscreen, for universal 178498 Overlay, touchscreen, for 7 in touch-only panel mount 176126 Overlay, touchscreen, for 12 in touch-only panel mount

Two-channel input relay, 2.5-28 VDC Two-channel input relay, 120 VAC Two-channel input relay, 240 VAC Two-channel input relay, 10-32 VDC Two-channel output relay, 120-140 VAC at 2 amp Two-channel output relay, 240-280 VAC at 7 amp Two-channel output relay, 3-60 VDC at 1 amp output relay, 0-200 VDC/VAC at 1.5 A/10 W 71377 Two-channel (dry contact) 84698 Two-channel output relay, inductive load, 120-140 VAC at 2 A 84699 Two-channel output relay, inductive load, 240-280 VAC at 2 A relay rack, panel mount and wall mount, 52312 Eight-channel requires 50-Pin flat or round ribbon cable - 4 slots relay rack, panel mount and wall mount, 52314 16-channel requires 50-Pin flat or round ribbon cable - 8 slots relay rack, panel mount and wall mount, 52315 24-channel requires 50-Pin flat or round ribbon cable - 12 slots 170008 Cable, 60-Pin flat ribbon w 50-Pin adapter, 24 in length 170009 Cable, 60-Pin round w 50-Pin adapter, 60 in length 170736 Cable, 60-Pin round w/ cord grip and 50-Pin adapter

Options/Accessories Part #

Options

Description

Part # Description

USB Cables (Note: Cables have a plug)

Manuals and Software 77925 Revolution scale software 166046 Manual, Operation 167659 Manual, Technical 167660 CD, 1280 Documents 164939 8 GB Micro SD card with SD and USB adapter 173046 USB flash drive, 1 GB

152434

www.ricelake.com | Phone: 800-472-6703

Flash Drive Cover

Cover

Unsealed Connectors

Type B

Type A

Sealed Connector

530

The fan plate (PN 169350) will need to be updated if replacing CPU version A, B or C

Sealed Receptacle

Connector Type Sealed A B

Unsealed A B

Unsealed connectors X USB-A to USB micro A, 2 m cable Unsealed connectors 79074 X X USB-A to USB-B, 2 m cable Sealed connectors, 124700 X X USB-A to USB-B, 3 m IP68 cable Sealed connector USB-A to 126477 unsealed connector USB-A, X X 3 m IP68 cable Sealed connector USB-A to 124701 unsealed connector USB-B, X X 3 m IP68 cable Sealed connector USB-B to 124702 unsealed connector USB-A, X X 3 m IP68 cable USB Receptacles (Note: Receptacles have a socket) Sealed receptacle USB-A for panel 176790 X mount, 0.75 m cable Sealed receptacle USB-A 126476 X X for wall mount, 0.5 m cable Sealed receptacle USB-A 172735 X X for universal, 0.25 m cable 124694 Cover for sealed receptacles 124689 Cover for flash driver mounts on sealed receptacle Ethernet Cables Sealed Unsealed Unsealed Ethernet, RJ45 to RJ45, 72697 X 2 m cable Sealed to sealed Ethernet 124706 X 3 m cable Sealed to unsealed Ethernet 124707 X X 3 m cable Ethernet Receptacles Sealed Unsealed Sealed receptacle Ethernet RJ-45, 176789 X 0.75 m cable Sealed receptacle Ethernet RJ-45, 172734 X 0.5 m cable Sealed receptacle Ethernet RJ-45, 126353 X 0.25 m cable

Backplate

920i User Programs ®

INDICATORS / CONTROLLERS

Dual Kiosk Truck In/Out Single Scale

PN 156959: System consists of a bidirectional single platform truck scale, inbound truck kiosk and outbound truck kiosk. Inbound (if two outbound kiosks are used) and outbound tickets with transaction storage of each weighment. Suggested Hardware:

Grain Program with Shrink Calculator

PN 156886: This custom application for the 920i supports weighing trucks of grain. Up to 200 grain types, associated divisors and accumulator can be stored. Up to 500 accounts and 1,000 trucks can be stored. Suggested Hardware:

• PN 67527 920 single channel A/D • PN 67600 1M memory card • PN 23113 Epson TM-U295 ticket printer • PN 93359 PS2 keyboard

Truck In/Out with Products/ Customers/Trucks and Reports

PN 77297: This program supports truck in/ out weighing program for manual truck transactions using Rice Lake Weighing Systems’ 920i digital weight indicator. Stored IDs allow you to keep a database of truck IDs, customer, product, project information and weigh-in weights in the indicator’s memory. Parameters are accessed by simply scrolling through the Supervisor main menu using the down arrow on the 920i. The 920i can automatically store up to 100 truck IDs and tare weights, 950 customers, 1,000 products and 1,000 projects.

Short Axle Weighing Program

Truck In/Out with Report

PN 153146:

PN SZ99999:

920i custom program will interface to a short axle scale and direct each axle across the scale using traffic lights.

920i program allows trucks to weigh in and out (saves inbound weight after weighing out and has value swapping) and stores the transaction after each weigh out with truck ID, gross, tare and net. Transactions may be printed or cleared at any time through the Setup menu. An HID scanner is available as a peripheral piece of hardware.

Suggested Hardware:

• PN 67527 920 single channel A/D • PN 23113 Epson TM-U295 ticket printer • PN 101923 FRP box with 4 channel relay rack, for traffic light control • PN 23146 Traffic light kit • PN 15971 AC output relays for above (2 needed) • PN 103181 LaserLight remote display (optional) • PN 167093 LaserLight 2 remote display (optional)

Suggested Hardware:

• PN 119687 Outbound kiosk • PN 119689 A/D kiosk option • PN 119743 HID kiosk option

Standard Features • Pre-programmed software to carry out specific weighing functions • Utilize Rice Lake’s iRite programming language • For use with all Rice Lake 920i models (hardware requirements may apply) • Available pre-installed with purchase of new equipment, or via iRev for installation on existing 920i models • Fully customizable ™

™

Part Number/Price Part #

Description

153146 SZ99999 77297 156886 156959

Short axle weighing program Truck in/out with report Truck in/out with products/customers/trucks and reports Grain program with shrink calculation Dual kiosk truck in/out single scale

www.ricelake.com | Phone: 800-472-6703

• (2) PN 119687 Inbound/Outbound kiosk • PN 119689 A/D kiosk option

Suggested Hardware:

• PN 67527 920 single channel A/D • PN 67600 1 MB memory card • PN 23113 Epson TM-U295 ticket printer • PN 93359 PS/2 keyboard An ISO 9001 Registered Company © 2018 Rice Lake Weighing Systems 01/18 Prices and specifications subject to change without notice. Visit ricelake.com for current prices.

531

920i FlexWeigh Systems ®

Fillers/Batchers

INDICATORS / CONTROLLERS

101 Basic Filler Place an empty container on the scale. Automatically fill the container to a preset weight. Remove the container from the scale. Replace it on the scale with an empty container and repeat the process.

102 Automatic Fill, Automatic Discharge

Manufacturer-Approved DIRECT REPLACEMENT FOR FLEXWEIGH’S DWM-IV

103 Loss-In-Weight Filler

Standard Features Approvals

• Wall mount stainless steel enclosure • Application program 101, 102, 103, 104, 201, 202 • Front panel switches E-Stop, Reset/Resume, Start • Softkeys for presets, CN#, ID#, formula#, totals • Accumulating subtotal & total registers • Transmitted audit trail • Digital I/O board • Relay rack and SSR relay outputs

Dispense preset net weight quantities from the scale until either low level or less-than-preset gross weight is achieved. Then refill to high level.

104 Loss-In-Weight Filler

www.ricelake.com | Phone: 800-472-6703

Standard Switches

101

102

103

104

201

202

E-Stop mushroom Reset/resume Start Discharge

X X X -

X X X X

X X X -

X X X X

Standard Outputs

101

102

103

104

201

202

Fast fill** Slow fill*** Fill complete* Zero tolerance Discharge Refill Refill complete Slow cycle

X X OPT OPT -

X X OPT OPT X -

X X X X OPT OPT

X X X X

X X OPT OPT -

X X OPT OPT X -

* Dispense for 103 and 104 ** Fast Fill Ingredient 1 201/202 *** Fast Fill Ingredient 2 201/202

Place an empty container under the scale. Automatically fill the scale to a preset weight. Discharge the scale into the container. Remove the container from under the scale. Replace it under the scale with another empty container and repeat the process.

Product supply containers are placed on the scale. Net weight quantities are dispensed from the containers until empty. When containers empty in the middle of a dispense cycle, the cycle is paused and allowed to resume where it left off when the empty containers are replaced on the scale with filled ones.

201 Four Ingredient Dual Speed or Eight Ingredient Single Speed Batcher Place empty container on scale, automatically fill multiple ingredients in a sequential order to preset formula weights. Remove the container, replace with empty and repeat.

202 Four Ingredient Dual Speed or Eight Ingredient Single Speed With Discharge Fill tank or hopper with multiple ingredients in a sequential order then empty into a vessel below.

920i FlexWeigh Systems ®

Fillers/Batchers

Part #

Description

Est. Weight

120320 120321 120322 120323 Consult Consult Relays 52312 52316 52317

920i FlexWeigh Systems 101 920i FlexWeigh Systems 102 920i FlexWeigh Systems 103 920i FlexWeigh Systems 104 920i FlexWeigh Systems 201 920i FlexWeigh Systems 202

23 lb 23 lb 23 lb 23 lb 23 lb 23 lb

INDICATORS / CONTROLLERS

Part Number/Price

Eight-channel relay rack (4 slots) Two-channel output relay, 120 - 140 VAC at 2A Two-channel output relay, 240-280 VAC at 2A

Options/Accessories Part #

Description

120491 120493 124473 120496 152146

920i FlexWeigh Systems 101 manual 920i FlexWeigh Systems 102 manual 920i FlexWeigh Systems 103 manual 920i FlexWeigh Systems 104 manual 920i FlexWeigh Systems 201/202 manual

Optional Switches (Installed Price: $150.00) Switch Part # Selector 3 position Manual/ Off/ Auto Manual Ingredient Select Push-button Fill Discharge Dispense Refill Maintained/Off/Spring Return Fill On/-/Jog Fill Fast/-/Slow Discharge On/-/Jog Discharge Fast/-/Slow Dispense On/-/Jog Dispense Fast/-/Slow Refill On/-/Jog Manual Feed

Legend Part #

101

102

103, 104 201

202

121035

X X

121036 121037 121038 121039

X X

121040 121041 121043 121044 121046 121048 121049 —

X X

X X X X

94296

94276

X X X X X X X X X

Optional Front Panel Lights (Installed Price: $150.00) Ready Fill Complete Filling Filling Fast Filling Slow Discharging Discharging Fast Discharging Slow Dispensing Dispensing Fast Dispensing Slow Dispensing Complete Refilling Refill Complete Low Supply Fill Time Alarm Feeding (1-4) Slow Cycle

Lamp

Legend

101, 102 103

94289 Green 94290 Red 98760 Amber 98760 Amber 98760 Amber 94292 Blue 94292 Blue 94292 Blue 98760 Amber 98760 Amber 98760 Amber 94290 Red 94292 Blue 94290 Red 94290 Red 94290 Red 98760 Amber 94290 Red

121051 121052 121053 121054 121055 121056 121057 121058 121059 121060 121061 121062 121063 121064 121065 121066 — —

X X X X X X X X

104

X X X X X X X X

X X X X

201

202

X X

www.ricelake.com | Phone: 800-472-6703

94299

920i FlexWeigh Systems ®

Bulkweighers

INDICATORS / CONTROLLERS

107 Shipping Bulkweigher The 920i FlexWeigh 107 is designed for basic shipping-mode bulkweighing applications. In shipping mode, a scale is loaded and discharged repetitively until the accumulated weight meets the overall target value.

108 Receiving Bulkweigher

Manufacturer-Approved DIRECT REPLACEMENT FOR FLEXWEIGH’S DWM-IV

Standard Features

www.ricelake.com | Phone: 800-472-6703

• Wall mount stainless steel enclosure • Application program 107,108,109 • Front panel switches E-Stop, Start/Resume, End Cycle, Ship/Recv (only 109) • Softkeys for presets, ID1 and ID2 • Accumulating weight streaming • Fill and discharge sequence controls • Fill and discharge gate monitoring • Printer online checking • Weigh and surge hopper overfill monitoring • Transmitted audit trail • Digital I/O board • Relay rack and SSR relay outputs

Standard Switches

107

108

109

E-Stop mushroom Start/Resume End cycle Ship/Recv

X X X -

X X X X

Standard Inputs

107

108

109

Fill gate closed Discharge gate closed Surge hopper not full Weigh hopper not full* Printer online

X X X X X

Approvals

The 920i FlexWeigh 108 is designed for basic receiving mode bulkweighing applications. In receiving mode, a scale is loaded and discharged until there is no more product to receive. To end the cycle, the End Cycle button is pressed.

109 Ship/Receive Bulkweigher The 920i FlexWeigh 109 allows the user to select which mode of operation to use. This is done with a three-position locking key switch.

Options/Accessories Part #

Description

151848

920i FlexWeigh Systems 107/108/109 manual

Optional Switches

Installed Price: $150.00

Standard Outputs

107

108

109

Slow cycle alarm Gate alarm Scale over fill alarm Lower surge alarm Printer alarm Open fill gate Open discharge gate

OPT OPT OPT OPT OPT X X

Manual/Off/ Auto Man Fill On/-/Jog Man Disch On/-/Jog

Type

107 108 109

3 position key selector

Maintained/Off/ Spring Return

Options • Pilot lights for error indication • Manual override switches

Part Number/Price Part #

Description

Est. Weight

Consult Consult Consult

920i FlexWeigh Systems 107 920i FlexWeigh Systems 108 920i FlexWeigh Systems 109

23 lb 23 lb 23 lb

920i FlexWeigh Systems ®

Dispense preset net weight quantities at preset flow rate values.

106 Loss-In-Weight with Flow-Rate Control and Automatic Refill

Manufacturer-Approved DIRECT REPLACEMENT FOR FLEXWEIGH’S DWM-IV

Standard Features

Dispense preset net weigh quantities at preset flow rate values with automatic refill when gross weight drops below threshold.

205 Eight Ingredient Batcher with Flow-Rate Control Discharge Batch up to eight ingredients in sequential order to preset formula weights. Discharge to net quantities via preset flow-rate control.

Standard Switches/Outputs Standard Switches

105

106

205

E-Stop mushroom Reset/Resume Start Discharge

X X X -

X X X X

Outputs

105

106

205

Fast fill** Slow fill*** Fill complete* Zero tolerance Discharge Refill Refill complete Slow cycle

X X X Opt X Opt

X X Opt Opt

X X X Opt X -Opt

Approvals

• Wall mount stainless steel enclosure • Application program 105, 106, 205 • Front panel switches E-Stop, Reset/Resume, Start • Softkeys for presets, CN#, ID#, formula#, totals • Accumulating subtotal & total registers • Transmitted audit trail • Digital I/O board • Relay rack and SSR relay outputs

Part Number/Price Part #

Description

Est. Weight

Consult Consult Consult Relays 52312 52316 52317

920i FlexWeigh Systems 105 920i FlexWeigh Systems 106 920i FlexWeigh Systems 205

23 lb 23 lb 23 lb

Eight-channel relay rack (4 slots) Two-channel output relay, 120 - 140 VAC at 2A Two-channel output relay, 240-280 VAC at 2A

Options/Accessories Part #

Description

Consult Consult Consult

920i FlexWeigh Systems 105 manual 920i FlexWeigh Systems 106 manual 920i FlexWeigh Systems 205 manual

920i FlexWeigh Systems ®

Hand Batching

* Dispense for 105 and 106 ** Fast Fill Ingredient 1 205 *** Fast Fill Ingredient 2 205

211 Manual Batching System Prompts the user through manual weight additions based on a pre-entered formula

Manufacturer-Approved DIRECT REPLACEMENT FOR FLEXWEIGH’S DWM-IV

Standard Features • Stainless deep universal mount enclosure • Application program 211 • Softkeys for presets ID#; Formulas; Accumulating, Subtotal and Total Registers • Switch for manual confirmation • 20 ingredient database • 100 formula database • Audit trail data output • Ingredient usage totals

Part Number/Price Part #

Description

Est. Weight

Consult

920i Flexweigh Systems 211

13 lb

www.ricelake.com | Phone: 800-472-6703

105 Basic Flow-Rate Controller

INDICATORS / CONTROLLERS

Flow Rate Controllers

Approvals

535

INDICATORS / CONTROLLERS www.ricelake.com | Phone: 800-472-6703

MSI-8000

RF Remote Display

INDICATORS / CONTROLLERS

Specifications Enclosure: NEMA Type 4, IP65

Weight: 0.98 lb (445 g)

Keypad: On/Off, Zero (100%), Tare, Print, and two user-defined keys for the following functions: peak hold, high resolution, total, view total, net/gross, units switching

Display: Six-digit 1.0 in (26.4 mm) LCD

Units Displayed: Pounds, kilograms, tons, metric tons, kilonewtons

Annunciators: Stable, COZ, low battery, peak, net, kg, kN, lb, M, ton, setpoint, function LEDs

Power: Integral lithium ion battery Universal 115/230 VAC, 50/60 Hz battery charger (NA plug included)

Operating Time: Up to 24 hours of continuous use (15 minute auto-shutoff with non-use) -4°F to 140°F (-20°C to 60°C)

RF Radio Link: 2.4 GHz 802.15.4 Communicates with RF 3460, 4260, 7300, 7000 & 7001

RF Effective Range: Typically 100 or more feet (33 m)

Connector: Four-pin Turck connector for charging and RS-232 communication

Warranty:

Standard Features • Handheld RF remote display with six-digit 1.0 in (26.4 mm) LCD screen • Membrane keypad for remote control functionality • User definable function keys for added versatility • Universal 115/230 VAC, 50/60 Hz battery charger (NA plug standard) • Communicates with RF 4260, 7300, 7000 & 7001

Part Number/Price Part # 139381

One-year limited warranty A

MSI Part #

Description

503208-0001

MSI-8000 RF remote display (requires ScaleCore™ equipped MSI-7300, MSI-4260, MSI-3460 and TranSend receivers)

Options/Accessories Part #

MSI Part #

Description

149549

503486-0001

149550

503486-0002

150964 151095 182223

503489-0001 503506-0001

Universal 115/230 VAC 50/60 Hz (NA plug standard) battery charger for MSI-8000 RF remote display Universal 115/230 VAC 50/60 Hz (EC plug standard) battery charger for MSI 8000 RF remote display DB9 female serial interface cable for MSI-8000 RF remote display Audible alarm 12V car charger adapter for MSI-8000

Dimensions D

A B

8.00 in (203 mm) 3.85 in (98 mm)

C D

3.85 in (98 mm) 1.37 in (35 mm)

www.ricelake.com | Phone: 800-472-6703

Operating Temperature:

MSI-8000HD

Digital Weight Indicator

INDICATORS / CONTROLLERS

Specifications Enclosure: NEMA Type 4, IP68 milled anodized aluminum with O-ring gaskets

Keypad: On/Off, Zero (100%), Tare, Print, and two user-defined keys for the following functions: peak hold, high resolution, total, view total, net/gross, units switching

Display: Six-digit 1.0 in (26.4 mm) LCD

Units Displayed: Pounds, kilograms, tons, metric tons, kilonewtons

Annunciators: Stable, COZ, peak, kg, kN. lb, M, ton, setpoint, function LEDs. Channels: 1, 2, 3, 4, TTL

Power: 90-267 VAC, 9-36 VDC, 18-72 VDC, 120-300 VDC Optional battery power module available

Operating Temperature: -4° F to 140° F (-20° C to 60° C)

RF Remote Channels: Up to four remote sensors, monitored individually, in pairs, or sum all (non-A/D version only)

Service Counters

Standard Features • Indicator or RF remote display with six-digit 1.0 in (26.4 mm) LCD screen • IP68 milled aluminum enclosure • Membrane keypad for remote-control functionality • User definable function keys for added versatility • Compatible with all ScaleCore™-based products including: MSI-7300 Dyna-Link 2, MSI-3460 Challenger 3, MSI-4260 Port-A-Weigh, MSI-7000 and MSI-7001 • Swivel tilt stand

Optional Features www.ricelake.com | Phone: 800-472-6703

• Up to 8 configurable relay outputs • Wi-Fi communications • Bluetooth communications • 802.15.4 Serial RF • FHSS ®

Approvals

A/D version only

A/D Inputs: Two independent or summing load cell inputs

Excitation: 4.8 V current limited and over-voltage protected

Filtering: Off, Low, Hi-1, Hi-2

RF Radio Link: 2.4 GHz 802.15.4 Compatible with all ScaleCore™-based products including: MSI-7300 Dyna-Link 2, MSI-3460 Challenger 3, MSI-4260 Port-A-Weigh, MSI-7000 and MSI-7001

RF Effective Range: Typically 100 or more feet (33 m)

Data I/O: Dual RS-232 comm ports

Wired Ethernet: Up to 8 configurable relay outputs

Optional Communications: Wi-Fi Bluetooth Serial RF, Frequent Hopping Spread Spectrum Optional ®

Warranty: One-year limited warranty

Approvals: NTEP COC#15-110

MSI-8000HD

Part Number/Price Part #

Description

Est. Weight

153591 154853 160476 159377 159376 158427 158428 160478 159381 159380 158425 158426 160477 159379 159378 176957 176958 176959 176960 176962 176964 176965 176966 176967 176968

MSI 8000HD ScaleCore RF/Remote Display/85-265 VAC MSI 8000HD ScaleCore RF/Remote Display/Internal Battery MSI 8000HD ScaleCore RF/Remote Display/7-36 VDC MSI 8000HD ScaleCore RF/Remote Display/18-72 VDC MSI 8000HD ScaleCore RF/Remote Display/9-36 VDC MSI 8000HD Meter/2 A/D Inputs/85-265 VAC (non RF) MSI 8000HD Meter/2 A/D Inputs/Internal Battery (non RF) MSI 8000HD Meter/2 A/D Inputs/7-36 VDC (non RF) MSI 8000HD Meter/2 A/D Inputs/18-72 VDC (non RF) MSI 8000HD Meter/2 A/D Inputs/9-36 VDC (non RF) MSI-8000HD RF Meter/2 A/D Inputs/85-265 VAC MSI-8000HD RF Meter/2 A/D Inputs/Internal Battery MSI 8000HD RF Meter/2 A/D Inputs/7-36 VDC MSI 8000HD RF Meter/2 A/D Inputs/18-72 VDC MSI 8000HD RF Meter/2 A/D Inputs/9-36VDC MSI 8000HD BT Meter/Remote Display/85-265 VAC MSI 8000HD Wi-Fi Meter/Remote Display/85/265 VAC MSI 8000HD BT/Remote Display/Internal Battery MSI 8000HD Wi-Fi/Remote Display/Internal Battery MSI 8000HD BT/Remote Display/7-36 VDC MSI 8000HD Wi-Fi/Remote Display/7-36 VDC MSI 8000HD BT/Remote Display/9-36 VDC MSI 8000HD Wi-Fi/Remote Display/9-36 VDC MSI 8000HD BT/Remote Display/18-72 VDC MSI 8000HD Wi-Fi/Remote Display/18-72 VDC

5 lb (2.5 kg) 5 lb (2.5 kg) 5 lb (2.5 kg) 5 lb (2.5 kg) 5 lb (2.5 kg) 5 lb (2.5 kg) 5 lb (2.5 kg) 5 lb (2.5 kg) 5 lb (2.5 kg) 5 lb (2.5 kg) 5 lb (2.5 kg) 5 lb (2.5 kg) 5 lb (2.5 kg) 5 lb (2.5 kg) 5 lb (2.5 kg) 5 lb (2.5 kg) 5 lb (2.5 kg) 5 lb (2.5 kg) 5 lb (2.5 kg) 5 lb (2.5 kg) 5 lb (2.5 kg) 5 lb (2.5 kg) 5 lb (2.5 kg) 5 lb (2.5 kg) 5 lb (2.5 kg)

INDICATORS / CONTROLLERS

Indicator/Remote Display

Part #

Description

155173 155193 148624 158779 158780 158781 149549 149550 172490 172492 172493 172494 172495 172497 172498 172500 172501 172502 171676

MSI-8000HD spare tilt stand option kit MSI-8000HD Ethernet TCP/IP option kit wired MSI-8000HD serial RS-232 cable MSI-8000HD two each coil relay option kit, 250 VAC/30 VDC 5A or 100 VDC 0.4A MSI-8000HD two each solid state relay option kit, 60 Vpk 2.7A MSI-8000HD two each solid state relay option kit, 200 Vpk 0.9A Universal 115/230 VAC 50/60 Hz (NA plug standard) battery charger for MSI-8000HD battery powered device Universal 115/230 VAC 50/60 Hz (international plugs) battery charger for MSI-8000HD battery powered device Expanded Relay Kit, Four-Channel, 12A 5V, Latching Relays Expanded Relay Kit, Four-Channel, 12A 5V, Momentary Relays Expanded Relay Kit, Four-Channel, 3A 60Vpk, AC/DC Solid State Relays Expanded Relay Kit, Four-Channel, 0.9A 200Vpk, AC/DC Solid State Relays Expanded Relay Kit, Eight-Channel, 12A 5V, Momentary Relays Expanded Relay Kit, Eight-Channel, 3A 60Vpk, AC/DC Solid State Relays Expanded Relay Kit, Eight-Channel, 0.9A 200VPK, Solid State Relays Expanded Relays Option Kit, Four-Channel, 3A, 60Vpk Solid State Form C Relays Expanded Relays Option Kit, Eight-Channel, 3A 60Vpk, Solid State Form C Relays Expanded Relays Option Kit, Eight-Channel, 0.9A 200Vpk, Solid State Form C Relays Expanded Relays Option Kit, Eight-Channel, 12A 5V, Latching Relays

www.ricelake.com | Phone: 800-472-6703

Options/Accessories

NEW MSI-8004HD

Indicator/RF LED Remote Display

INDICATORS / CONTROLLERS

Specifications Display Six-digit, 1.5 in (38 mm) LED display with red/green or blue coloring

Enclosure: NEMA Type 4, IP65 milled anodized aluminum

Keypad: On/Off, Zero, Tare, Print and two user-defined keys

Functions: Peak hold, high resolution, total, view total, net/gross, units switching

Units Pounds, kilograms, tons, metric tons, kilonewtons

Annunciators: Stable, COZ, peak, kg, kN. lb, M, ton, setpoint, function LEDs,

Channels 1, 2, 3, 4, TTL

Power: 90-267 VAC, 9-36 VDC, 18-72 VDC, 120-300 VDC

Temperature: -4° F to 140° F (-20° C to 60° C)

RF Remote Channels:

Standard Features Approvals

• IP65 rugged milled aluminum enclosure • Backlit membrane keypad for user functioning and controls • Tilt bracket included

Up to 4 remote sensors monitored individually, in pairs or sum all (non-A/D version only) (when used with TranSend)

Service Counters: A/D version only

A/D Inputs:

Options

Measurement Canada Approved

• Expanded relay outputs • Battery pack for mobile operation • 2nd radio module for additional network connectivity

Four independent or summing load cell inputs

Excitation: 4.8 V current limited and over-voltage protected

Filtering: Off, Low, Hi-1, Hi-2

RF Radio Link

www.ricelake.com | Phone: 800-472-6703

2.4 GHz 802.15.4, optional second channel for Serial RF, 802.11 Wi-Fi, cellular connectivity or Bluetooth ®

1.66˝

11.10˝

RF Effective Range: Typically 300 ft (91.44 m) line of sight

8.76˝

Data I/O: Two RS-232 hard wired communication ports

SET POINTS 1

SCALE CHANNEL 1

ON DISPLAY FAULT

Approvals:

Class III/IIIL nmax =10000

NTEP COC #17-036, Measurement Canada 8.02˝

Warranty:

5.09˝

One-year limited warranty

BT RF TTL NET kg lb TEST

POWER

ZERO

TARE

UNITS

CHAN

MSI-8004HD

6.16˝

9.13˝

3.25˝

NEW MSI-8004

Part Number/Price Indicator Part # 178263 178265 178267 178269 178270 178271 178273 178274 178276 178278 183480 183481 Remote Display 178279 178281 178282 178283 178284 178285 183478 183479

Description MSI-8004HD Indicator, 4CH AC, Blue 85~264 VAC, 47~440 Hz, 120~370 VDC MSI-8004HD Indicator, 4CH AC, Red/Green 85~264 VAC, 47~440 Hz, 120~370 VDC MSI-8004HD Indicator, 4CH DC 8-32 V, Blue Best for external 12 V SLA Batteries MSI-8004HD Indicator, 4CH DC 8-32 V, Red/Green Best for external 12 V SLA Batteries MSI-8004HD Indicator, 4CH DC 9-36 V Iso, Blue Do not use on 12 V Vehicle Systems MSI-8004HD Indicator, 4CH DC 9-36 V Iso, Red/Green Do not use on 12 V Vehicle Systems MSI-8004HD Indicator, 4CH DC 18-75 V Iso, Blue MSI-8004HD Indicator, 4CH DC 18-75 V Iso, Red/Green MSI-8004HD Indicator, 4CH DC 5 V, Blue For use with external 15 W, 5 V Power Supplies MSI-8004HD Indicator, 4CH DC 5 V, Red/Green For use with external 15 W, 5 V Power Supplies MSI-8004HD Indicator, 4CH DC 5 V Blue, 1.5 in LED Display For use with external 15 W, 5 V Power Supplies MSI-8004HD Indicator, 4CH DC 5 V Red/Green 1.5 in LED Dual Color Display For use with external 15 W, 5 V Power Supplies

INDICATORS / CONTROLLERS

Indicator/RF LED Remote Display

MSI-8004HD Display, AC, Blue 85~264 VAC, 47~440 Hz, 120~370 VDC MSI-8004HD Display, AC, Red/Green 85~264 VAC, 47~440 Hz, 120~370 VDC MSI-8004HD Display DC, 8-32 V, Blue Best for external 12 V SLA Batteries MSI-8004HD Display, DC 8-32 V, Red/Green Best for external 12 V SLA Batter MSI-8004HD Display, DC 9-36 V Iso, Blue Do not use on 12 V Vehicle Systems MSI-8004HD Display, DC 9-36 V Iso, Red/Green Do not use on 12 V Vehicle Systems MSI-8004HD Display, DC 9-36 V Iso, Blue, 1.5 in LED Display Do not use on 12 V Vehicle Systems MSI-8004HD Display, DC 9-36 V Iso, Red/Green, 1.5 in Dual Color LED Display Do not use on 12 V Vehicle Systems

Part #

Description

148624

Serial Cable, RS-232 9000 Serial Cable, DCE Antenna Kit, Long Range Omni-directional, 9 dBi with 3m Coax Intended for omni-directional mast mounting (up to 2" Ø). Beam-width. Must be mounted vertically. Antenna Kit, Corner Reflector, 9 dBi with 3 m coax intended for directional wall or mast mounting (up to 2" Ø). Beam-width: 75° Elevation, 65° Azimuth Antenna Kit, Corner Reflector, 12 dBi with 3 m coax intended for directional wall or mast mounting (up to 2" Ø). Beam-width: 50° Elevation, 36° Azimuth Antenna Kit, YAGI, 15 dBi with 3 m coax highly directional wall or mast mounting (up to 2" Ø). Beam-width: 30° Elevation, 34° Azimuth Antenna Kit, Vehicle Mount, 5 dBi with 5 m coax omni-directional. Mounts in 3/4" Hole. Option kit, tilt stand Option kit, Ethernet (hard wired) RJ-45 Cable (included) Audible alarm Not compatible with battery versions 22436 Cable, Comm DB9F 9 Pin Fem One end stripped and tinned on other end 6' Pin 2 (Brown) Pin 3 (Red) Pin 5 (Yellow) For use with MSI8004HD serial ports to connect to: Scoreboard displays, printers, computers & other equipment that supports RS-232 Battery, 5V Li-ion battery with USB power ports. Output 5 V/3.0 A per port (6.0 A max)Rate, 2 A per port (4 A if both ports are used) 8004 option kit, Bluetooth with SMA antenna 8004 option kit, WiFi with SMA antenna Power Adapter, 12 VDC 5 VDC Dual USB Car Charger plus 3 ft USB Cable

139309 139310 139311 139312 139313 155173 155193 171203 22436 183437 184132 184131 182224 Relays 172500 172501 172493 172497 172494 172502 172498 172492 172495 172490 171676

Expanded Relays Option Kit, four-channel, 3A, 60VPK SSR form C Expanded Relays Option Kit, eight-channel, 3A 60VPK, SSR form C Expanded Relays Option Kit, four-channel, 3A 60VPK, AC/DC SSR Expanded Relays Option Kit, eight-channel, 3A 60VPK, AC/DC SSR Expanded Relays Option Kit, four-channel, 0.9A 200VPK, AC/DC SSR Expanded Relays Option Kit, eight-channel, 0.9A 200VPK, SSR form C Expanded Relays Option Kit, eight-channel, 0.9A 200VPK, SSR Expanded Relays Option Kit, four-channel, 12A 5 V, momentary Expanded Relays Option Kit, eight-channel, 12A 5 V, momentary Expanded Relays Option Kit, four-channel, 12A 5 V, latching relays Expanded Relays Option Kit, eight-channel, 12A 5 V, latching relays

www.ricelake.com | Phone: 800-472-6703

Options

MSI-9850 CellScale RF Digital Indicator ™

INDICATORS / CONTROLLERS

Specifications Enclosure: NEMA Type 4, IP65 milled anodized aluminum with O-ring gaskets NEMA Type 6, IP67 with optional long-range antenna

Weight: 5.0 lb (2.8 kg)

Keypad: 33 keys–12 key alphanumeric, four cursor keys, seven control keys and 10 user programmable keys. Password protected with lock feature

Weight Display: Six-digit, 1.2 in (30 mm) high numeric weight LED, four alphanumeric 0.5 in (13 mm) high data LED, six LED function select annunciators, 10 LED annunciators, Low battery LED indicator

Information Display: 1.4 in x 2.6 in (36 mm x 67 mm) backlit LCD. Capable of 8 lines of 21 characters each backlight selectable On, Off or Automatic

Power Input: Internal AC/DC power supply: 85-265 VAC, 47-440 Hz/130-300 VDC. Also included: An independent 7-25 VDC power input (requires optional power/switch interface cable) 8 ft/2.4 m power cable included (NA plug standard)

Standard Features • Compatible with MSI-6260CS, MSI-9300 and MSI-9000 CellScale • Six-digit 1.2 in (30 mm) LED display • 1.4 in x 2.6 in (36 mm x 67 mm) information LCD display • 2.4 GHz spread spectrum transceiver • RS-232 data I/O with real time clock • NEMA Type 4, IP65 enclosure • Power input 85-265 VAC, 47-440 Hz / 130-300 VDC; 8 ft/2.4 m power cable included (NA plug standard)

Approvals

Operating Temperature: 4° F to 158° F (-20° C to 70° C)

Radio Link: FHSS at 2.4 GHz (up to 64 network selections)

Radio Link Effective Range: Typically 500 ft (150 m) indoor, 1,000 ft (300 m) outdoor with standard antennas. See optional antennas for longer range.

Standard Antenna: 1/2 wave 2 dBi, articulated

www.ricelake.com | Phone: 800-472-6703

Additional Options

RFI/EMI Shielding:

(Contact MSI for application consultation)

Connectors:

Exceeds NIST HB44 and CE Standards

• NTEP Certified • Long range antenna, omni-directional with 9dBi • Wi-Fi Ethernet connectivity (802.11b) • Hard wired Ethernet output connection • Single and dual 4-20 mA output, provides programmable current output • Bar code scanner • Set-point relays, provides up to eight setpoint relay outputs for direct interfacing to external devices • External audible alarm (activates with setpoint control) • Universal mounting bracket for either desktop or wall/bulkhead mount • Optional isolated and non-isolated DC power supplies

RS-232, Turck compatible Pico connector

Warranty: One-year limited warranty

Approvals: NTEP CC 05-077

MSI-9850 CellScale RF Digital Indicator Part Number/Price Part #

MSI Part #

Description

159625

N/A

162035

N/A

MSI-9850 RF remote indicator AC/DC N/A MSI-9850 RF remote indicator AC/DC Inter- N/A national Power

Capacity

Resolution

Est. Weight

N/A

10 lb (4.5 kg)

N/A

10 lb (4.5 kg)

Options/Accessories Part #

MSI Part #

Description

141558 138358 176074 138625 143466 Consult Consult 139032 139033 138615 138616 Consult Consult Consult 138628 138341 138351 138631 138632 138633

10082 502513-0001

External setpoint relay output cable, 6.5 ft/2 m RS-232, 13 ft/4 m cable with DB-9 connector Cable, RS-232, serial output, with DB-9 connector, null modem RF remote controller (control for On/Off, Zero, Tare and other functions. 10 m operating range) Long-range antenna, omni-directional with 9 dBi gain, includes 10 ft/3 m coaxial cable 9 dBi or 14 dBi gain corner reflector antenna 5 dBi gain vehicle/cab mount whip antenna, includes 17 ft/5.2 m coaxial cable Hard-wired Ethernet output connection, includes connector Wi-Fi Ethernet connectivity (802.11b - contact factory for assistance) Single 4-20 mA output. Provides programmable current output Dual 4-20 mA output Bar code scanner (several options available) Internal setpoint relays, provides up to eight setpoint relay outputs for direct interfacing to external devices Control kit, provides remote I/O relay board for interfacing to setpoints (note: I/O modules not included) External audible alarm (activates with setpoint control) Universal mounting bracket for either desktop or wall / bulkhead mount (specify type) Vehicle or wall mount bracket stand Non-isolated 7-25 VDC power input, includes 13 ft/4 m non-terminated DC input cable Isolated 10-36 VDC power input, includes 13 ft/4 m non-terminated DC input cable Isolated 20-72 VDC power input, includes 13 ft/4 m non-terminated DC input cable

www.ricelake.com | Phone: 800-472-6703

502598-0001 12147 Consult Consult 502835-0001 502835-0002 Consult Consult Consult Consult Consult 502599-0001 502488-0001 502499-0001 502600-0003 502600-0004 502600-0005

INDICATORS / CONTROLLERS

™

VIRTUi2 ®

PC-Based HMI for iQube

2 ®

INDICATORS / CONTROLLERS

Specifications Minimum System Requirements: Windows XP™ or greater Serial port, USB to serial converter, or Ethernet TCP/IP for connection to iQUBE2 Additional serial ports are required for connections to printers/remote displays ®

Status Annunciators: Units (lb, kg, short tons (tn), metric tons (t), NONE) gross/net, motion, center of zero

Approvals: NTEP CC 04-058 Classes III and IIIL at 10,000 d

Virtui2 is a Windows®-based desktop application that works with iQUBE2 to replicate simple indicator functionality ideal for system integrators and OEMs wanting to provide a PC-based solution. Load cells are individually monitored and calibrated, making setup easy.

Standard Features • Web browser-based iQUBE2 cell status • Up to four scale systems and one total scale • Virtual front panel consists of display and five button keypad • Primary/secondary units configuration (lb, kg, short tons, metric tons, none) • RS-232 communications at up to 460 Kbps • Electronic Data Processing (EDP) port over RS-232 and TCP/IP • Printer port for output-only, simplex communications • Two print formats • Provides iQUBE2 configuration screen and iQUBE2 digital I/O configuration • Supports iQUBE2 diagnostics with configurable error reporting • Peak weight history • Recalibration notification • Provides local and remote reporting of diagnostics and error conditions • Concentrated load capacity (CLC) • Section capacity ®

Approvals

www.ricelake.com | Phone: 800-472-6703

Part Number/Price Part #

Description

108435 108436

VIRTUi2 virtual indicator DEMO CD Activation part number requires machine ID and customer’s email address

INDICATORS / CONTROLLERS www.ricelake.com | Phone: 800-472-6703

SCT-1100 and SCT-2200 Advanced Series Signal Conditioning Transmitter/Indicator

INDICATORS / CONTROLLERS

APPROVALS

Pending

SCT-1100 Specifications 12/24 VDC, Power Consumption: 70 mA min – 100 mA max 5VDC, 120 mA, 8 x 350 Ω ± 39 mV 0.03 µV/graduation minimum 0.3 µV/graduation recommended Four channel A/D 24-bit sigma-delta conversion, up to 200 conv. /sec. auto select

SCT-2200 Specifications 12/24 VDC, Power Consumption: 70 mA min – 100 mA max 5 VDC, 120 mA, 8 x 350 Ω ± 39 mV 0.03 µV/graduation minimum 0.3 µV/graduation recommended One channel A/D 24-bit sigma-delta conversion, up to 200 conv. /sec. auto select

Internal resolution: 1.5 million counts Weight display resolution: 800,000 minimum

Two inputs: 12/24 VDC Two outputs:150 mA 48 VAC/ 150 mA 60 VDC 1-RS-485, 1-RS-232 Opt isolated, 16-bit 0-20mA, 4-20mA (Maximum 350,000 ohm) 0-5VDC, 0-10VDC (Minimum 10,000 ohm) Six-digit (13 mm), red LED Annunciators: Net, center of zero, stability

Two inputs: 12/24 VDC Two outputs:150 mA 48 VAC/ 150 mA 60 VDC 1-RS-485, 1-RS-232 Opt isolated, 16-bit 0-20mA, 4-20mA (Maximum 350,000 ohm) 0-5VDC, 0-10VDC (Minimum 10,000 ohm) Six-digit (8 mm), red LED Annunciators: Net, center of zero, stability

Keyboard

Five key, membrane panel, tactile feel Zero (Down), Tare (Up), Mode (Right), Print (Enter), C (On/Off)

Five key, tactile feel Zero (Down), Tare (Up), Mode (Right), Print (Enter), C (On/Off)

Temperature & Humidity

Working Temperature: -15° C to 40° C Humidity: 85% non-condensing

Dimensions (W x H x D)

4.17 in x 3.54 in x 2.28 in (106 mm x 90 mm x 58 mm)

0.98 in x 4.52 in x 4.72 in (25 mm x 115 mm x 120 mm)

Weight

1 lb (0.5 kg)

Rating/Material

NEMA Type 1 plastic pluggable connectors

Warranty

One-year limited warranty

Standard Features

• Quick menu for real and theoretical calibration • Red LED display (13 mm) and six LEDs to showing active functions • Standard DIN rail-mounting with power supply and enclosures • Configurable calibration and setup parameters from keyboard • Up to three calibration linearization points or three from the keyboard • Reading of the net, gross and tare weights, clearing, semi-automatic and presettable tare, scale switch, setting of outputs application thresholds • Diagnostic information via serial port, message display, printing, setting of APW in counting mode, simulation of key pressure

• HUB Mode connects up to 16 transmitters to one fieldbus • Quick menu for real and theoretical calibration • Red LED display with six-digits (8 mm) and six LEDs to showing active functions • Standard DIN rail mounting with power supply and enclosures • Configurable calibration and setup parameters from keyboard • Up to three calibration linearization points or three from the keyboard • Reading of the net, gross and tare weights, clearing, semi-automatic and presettable tare, scale switch, setting of outputs application thresholds • Diagnostic information via serial port, message display, printing, setting of APW in counting mode, simulation of key pressure, Modbus RTU • Double RS-485 port for a quick network connection • Printer management on second serial port available

Power Excitation Voltage Analog Signal Input Range Analog Signal Sensitivity A/D Sample Rate Resolution Digital Inputs/Outputs Serial Port Analog Output (if equipped) Display

www.ricelake.com | Phone: 800-472-6703

546

APPROVALS

SCT-30 and SCT-40

APPROVALS

Analog Signal Sensitivity

SCT-30 Specifications Input: 12 -24 VDC Power consumption: 3W 5 VDC, 120 mA, 8 x 350 Ω ± 39 mV 0.1 µV/graduation minimum 1.0 µV/graduation recommended

SCT-40 Specifications Input: 12 -24 VDC Power consumption: 5W 5 VDC, 240 mA, 16 x 350 Ω ±39 mV 0.1 µV/graduation minimum 1.0 µV/graduation recommended

A/D Sample Rate

300 Hz

600 Hz

Resolution

Internal resolution: 16 million counts System linearity: ± 0.01% full scale

Internal resolution: 16 million counts Weight display resolution: 999,999 System linearity: ± 0.01% full scale

Digital Inputs/Outputs

N/A

3 inputs 5-24 VDC, 5 outputs, 115 VAC/150 mA

Serial Port Analog Output (if equipped)

RS-485 Optoisolated, 16 bit 0-20 mA, 4-20 mA (max 300 ohm) 0-10 VDC, 0-5 VDC (min 10,000 ohm)

Display

Eight-digit alphanumeric tow line LCD, 5 mm high

Keyboard

Control knob and DIP switches

Temperature & Humidity

Working temperature: -4° F to 140° F (-20° C to 60° C) Humidity: 85% non-condensing SCT converter (W x H x D): 3.54 in x 3.74 in x 2.36 in (90 mm x 95 mm x 60 mm) IP67 enclosure (W x H x D): 6.69 in x 5.51 in x 3.74 in (170 mm x 140 mm x 95 mm) 1 lb (0.5 kg) DIN rail mount: NEMA Type 1 Sealed enclosure: NEMA Type 4/IP67, plastic enclosure, clear cover, six PG9 cord grips One-year limited warranty

RS-485 or RS-232 simplex supports up to 115,200 bps Optoisolated, 16 bit 0-20 mA, 4-20 mA (max 300 ohm) 0-10 VDC, 0-5 VDC (min 10,000 ohm) Backlit graphic LCD, transmissive 128 x 64 pixel resolution, 60 x 32 mm visible area Five-key tactile keypad Test, Zero, Tare, Print Menu, Escape, Left and Up, Navigator, Enter Working temperature: -4° F to 140° F (-20° C to 60° C) Humidity: 85% non-condensing SCT converter (W x H x D): 5.82 in x 3.62 in x 2.36 in (148 mm x 92 mm x 60 mm)

Power Excitation Voltage Analog Signal Input Range

Dimensions (W x H x D) Weight Rating/Material Warranty

1 lb (0.5 kg) DIN rail mount: NEMA Type 1 Sealed enclosure: NEMA Type 4/IP67, plastic enclosure, clear cover, six PG9 cord grips One-year limited warranty

Standard Features

• LCD display, 5 mm, eight-digit • Powers up to eight (350 Ω) load cells in parallel (with a 24-bit A/D converter) • A/D converter 24-bit (16,000,000 points) 4.8 kHz • 16-bit analog output: 0-20 mA, 4-20 mA, 0-5 V, 0-10 V, ±5 V, and ±10 V • Mounting on Omega/DIN rail for back panel or junction box • IP67-rated enclosed versions • Diagnostic message for load cell disconnect and over capacity errors

• LCD display, 60 mm x 32 mm • Supports up to eight independent reading channels for load cells • Displays weight, configuration, calibration and error conditions • DIN rail mounting • Theoretical calibration, real-weight calibration and error conditions • Push button or preset tare • Converts digital weight to analog output or optional DeviceNet™, Profibus™ or EtherNet/IP™ protocols • Supports ASCII or MODBUS RTU protocols • Full scale analog cut put with zero setting and PLC correction of analog signal • Bit swapping selection for little endian and endian format • Three digital inputs, five digital outputs • One serial port, RS-232 simplex and RS-485 connection • CD manual

www.ricelake.com | Phone: 800-472-6703

SCT converter with analog output

INDICATORS / CONTROLLERS

Signal Conditioning Transmitter/Indicator

547

SCT-1100, 2200, SCT-10, 20, 30, and SCT-40 Signal Conditioning Transmitter/Indicator

INDICATORS / CONTROLLERS

SCT-30

SCT-1100

Part Number/Price

Part Number/Price Part #

Est. Weight

Description

Indicator, SCT1100-AN 12-24 VDC and, 182588 RS485/232 Serial Port, Analog Out DIN Mount, four load cell input Power Supply 88792 12 VDC 1.2 A DIN rail mounted power supply 119244 24 VDC 1.3 A DIN rail mounted power supply

1 lb 1 lb 1 lb

SCT-2200

Description

Est. Weight

156794 156834 88792 119244 131129

SCT-30 converter with analog output SCT-30 converter with analog output in enclosure 12 VDC 1.2 A DIN rail mount power supply 24 VDC 1.3 A DIN rail mount power supply Installation manual

1 lb 1 lb 1 lb 1 lb 1 lb

SCT-40 Part Number/Price

Part Number/Price Part #

Part #

Est. Weight

Description

www.ricelake.com | Phone: 800-472-6703

Transmitters SCT2200 12-24 VDC,and RS485/232 182587 Indicator, Serial Port, DIN Mount SCT2200-AN Analog Output, 12182589 Indicator, 24 VDC, and RS485/232 Serial Port DIN Mount Fieldbus SCT2200,Profinet 12-24 VDC, RS485 182592 Fieldbus, Connection and ProfiNet output DIN Mount Fieldbus, SCT2200, Wi-Fi 12-24 VDC, RS485 182594 Connection and WiFi and TCP/IP Output DIN Mount Fieldbus, SCT2200, Ethernet TCP/IP 12-24 VDC, 182595 RS485 Connection and TCP/IP and MODBUS TCP output DIN Mount Fieldbus, SCT2200, Profibus 12-24 VDC, RS485 182593 Connection and Profibus output DIN Mount Fieldbus, SCT2200, EtherNet/IP 12-24 VDC, 182591 RS485 Connection and EtherNet/IP output DIN Mount Fieldbus, SCT2200, DeviceNet 12-24 VDC, RS485 182596 Connection and DeviceNet output DIN Mount SCT2200, EtherCAT 12-24 VDC, RS485 182598 Fieldbus, Connection and EtherCAT output DIN Mount Fieldbus, SCT2200, CANopen 12-24 VDC, RS485 182597 Connection and CANopen output DIN Mount 182599 Cable, SCT2200, RS485 Power Supply 88792 12 VDC 1.2 A DIN rail mounted power supply 119244 24 VDC 1.3 A DIN rail mounted power supply

1 lb 1 lb 1 lb 1 lb 1 lb 1 lb 1 lb 1 lb 1 lb

Part #

Description

Est. Weight

170470 170471 170472 170473 170474 170475 170476 88792 119244 131128

SCT-40 with analog output SCT-40 with DeviceNet output SCT-40 with Profibus SCT-40 with EtherNet/IP SCT-40 with TCP/IP SCT-40 with Modbus/TCP SCT-40 with ProfiNet/I/O 12 VDC 1.2 A DIN rail mounted power supply 24 VDC 1.3 A DIN rail mounted power supply Installation manual

1 lb 1 lb 1 lb 1 lb 1 lb 1 lb 1 lb 1 lb 1 lb 1 lb

SCT-10 Part Number/Price Part #

Description

Est. Weight

129393 129394 88792 119244 131129

SCT-10 converter with analog output SCT-10 converter with analog output in enclosure 12 VDC 1.2 A DIN rail mounted power supply 24 VDC 1.3 A DIN rail mounted power supply Installation manual

1 lb 1 lb 1 lb 1 lb 1 lb

SCT-20 Part Number/Price 1 lb 1 lb

Est. Weight

Part #

Description

129396 129397 129558 129398 132534 156903 88792 119244 131128

SCT-20 converter with analog output SCT-20 converter with DeviceNet output SCT-20 converter with Profibus DP SCT-20 converter with EtherNet/IP SCT-20 converter with TCP/IP EtherNet SCT-20 converter with Modbus/TCP 12 VDC 1.2 A DIN rail mounted power supply 24 VDC 1.3 A DIN rail mounted power supply Installation manual ™

™

1 lb 1 lb 1 lb 1 lb 1 lb 1 lb 1 lb 1 lb 1 lb

Relays and Racks

OPTO 22 G4 PN-45408

OPTO 22 G4 PN-15973

Dayton multi-function relay

Allen-Bradley® multi-function relay with digital display

Grayhill Relays and Racks

INDICATORS / CONTROLLERS

Input/Output Components

16-channel relay rack

24-channel relay rack

www.ricelake.com | Phone: 800-472-6703

8-channel relay rack

549

Input and Output Components/ Grayhill and OPTO 22 Relays and Racks INDICATORS / CONTROLLERS

Part Number/Price Part #

Description

Input/Output Component 43942 Allen-Bradley multi-function relay with digital display 29616 Dayton multi-function relay Other Relays 15952 Eight-pin octal relay, AC/DC output, 10A, 120 VAC coil 15960 Eight-pin octal relay, AC/DC output, 10A, 6 VDC coil 15961 Eight-pin octal socket Grayhill Relays and Racks 52332 Two-channel input relay, 2.5-28 VDC 52318 Two-channel input relay, 120 VAC 52319 Two-channel input relay, 240 VAC 52331 Two-channel input relay, 10-32 VDC 52316 Two-channel output relay, 120-140 VAC at 2 amp 52317 Two-channel output relay, 240-280 VAC at 2 amp 71376 Two-channel output relay, 3-60 VDC t 1 amp 71377 Two-channel output relay, 0-200 VDC/VAC at 1.5 A/10 W (dry contact) 52331 Two-channel input relay, 10-32 VDC 84698 Two-channel output relay, inductive load, 120-140 VAC at 2 A 84699 Two-channel output relay, inductive load, 240-280 VAC at 2 A 52312 Eight-channel relay rack, 920i panel mount, wall mount requires 50-Pin connector (4 slots) 52314 16-channel relay rack, 920i panel mount, wall mount requires 50-Pin connector (8 slots) 52315 24-channel relay rack, 920i panel mount, wall mount requires 50-Pin connector (12 slots) 46189 Jumper strap, 10 position for Grayhill 108396 Digital input 5 VDC, 15-30 VAC/10-32 VDC 108397 Digital output 5 VDC, 3-60 VDC 70780 Cable, 50-Pin flat ribbon for digital I/O 70779 Cable, 50-Pin round ribbon for digital I/O with cord grip 72442 Cable, 50-Pin round ribbon for digital I/O without cord grip ®

OPTO 22 Relays and Racks Part #

Description

www.ricelake.com | Phone: 800-472-6703

15969 G4IDC5 10-32 VDC Input relay module, white (N/O) 15970 G40DC5R dry contact 100 VDC/1.5 A output, red (N/O) 22848 G40DC5R5 dry contact 100 VDC/1.5 A output, red (N/C) 15971 G40AC5 115 VAC Output relay module, black (N/O) 15972 G4IAC5 115 VAC Input relay module, yellow (N/O) 22847 G40AC5A5 115/230 VAC Output relay module, black (N/C) 36632 G40AC5A 115/230 VAC Output relay module, black (N/O) 36631 G4IAC5A 230 VAC Input relay module, yellow (N/O) 26834 Fuse, 1A 250V (for PN 15970 and PN 22848) 21735 Fuse, 4A 250V (for PN 15971, PN 22847 and PN 36632) 16478 Quencharc arc suppressor 101923 Remote relay box, does not include relay 15973 Four-channel relay rack, 3.25 in x 3.25 in 45408 Four-channel relay rack 6.1 in x 1.2 in (non UL) 99032 Adapter plate, for four-channel Opto rack 33490 155253 Board assembly, DWM IV, eight-channel, Opto 22 GU series compatible, (non UL) Relay Boards Fixed Dry Contact Relay 30549 2-channel 120-240 VAC or 30 VDC/5A 15959 4-channel 120-240 VAC or 30 VDC/5A 29615 Board, relay mounting 1-channel (requires DIN rail for mounting (non UL) ®

INTRINSICALLY SAFE

Caution: The equipment contained within this Explosive Environment section requires greater attention to specification and installation guidelines. Improper specification, installation or service of these products can result in loss of equipment or serious injury. Rice Lake Weighing Systems has assembled the very best intrinsically safe and explosion-proof equipment. In order to properly specify, install and service this equipment, it is necessary that our distributors understand and appreciate the possible risks involved. In an effort to educate our customers on some of the precautions required, we created an Explosive Environment Review booklet. Available upon request, this booklet reviews the following:

INDICATORS / CONTROLLERS

Explosive Environment Equipment Policy

• Explosive environment designations: Class, Division and Group • Standards and codes applicable to hazardous environment equipment • Equipment liability • Theory of intrinsically safe, explosionproof and purged systems • Equipment specification guidelines • Proper installation procedures • Service precautions

• NFPA 70, “National Electrical Code Junction Box (NEC) Handbook” (Optional) • NFPA 496, “Classification of Gases, VDC Vapors, and Dusts for Electrical Equipment in Hazardous (Classified) Locations” • ANSI/UL 913, “Standard for Intrinsically FMBattery Safe Apparatus and Associated Approved (Optional) Apparatus for use in Class I, II and III, Load Cells Division 1 Hazardous Locations” • ANSI/ISA RP 12.6, “Installation of Intrinsically Safe Instrument Systems for Hazardous (Classified) Locations” • FM Approval Standard 3610, “Approval Standard, Intrinsically Safe Apparatus and Associated Apparatus for use in Class I, II and III, Division 1 Hazardous Locations” • FM Approval Standard 3615, “Approval Standards, Explosion Proof Electrical Equipment” • “Electrical Installations in Hazardous Locations”

Fiber Optic

AC Power Supply

I/O Module (Optional) 115/230 VAC

Battery Charger (Optional)

Plant Safety Engineers and Certified Electricians should always be involved in the specification and installation of any explosive environment equipment. Please see Hazardous Area Classification on page 552 for assistance in selecting hazardous area control equipment for your application requirements.

www.ricelake.com | Phone: 800-472-6703

The Explosive Environment Product Review booklet also includes the resource information listed below:

INTRINSICALLY SAFE

Hazardous Area Classification INDICATORS / CONTROLLERS

For assistance in selecting hazardous area control equipment for your application requirements, please complete this form and submit, along with a description of the application, to:

Rice Lake Weighing Systems Attn: Hazardous Environment 230 West Coleman Street Rice Lake, WI 54868 Telephone: 715-234-9171 • Fax: 715-234-6967 RLWS File #:______________________________________________Date:__________________________________ Sales Order #:_____________________________________________Checked By:___________________________ Equipment PN#(s) & Serial Number(s):______________________________________________________________ Factory Mutual Not Applicable ____________________________ (International Orders Only)________________

For Rice Lake Office Use Only

RICE LAKE CUSTOMER INFORMATION: Rice Lake Customer Name: _____________________________Customer Number: ____________________________ Address: ____________________________________________________________________________________________ City: __________________________________________________ State: _____________ Zip: _______________________ Telephone: ( _____ )_____________________________________Fax: ( _____ )___________________________________ Contact Name: _______________________________________________________________________________________

(Printed name)

(Signature)

(Date)

Authorized Signature: ___________________________________________________________________________________________ www.ricelake.com | Phone: 800-472-6703

(Printed name)

(Signature)

(Date)

END USER INFORMATION: End User Company Name: _____________________________________________________________________________ Address: ____________________________________________________________________________________________ City: __________________________________________________ State: _____________ Zip:________________________ Telephone: ( _____ )_____________________________________Fax: ( _____ )___________________________________ Contact Name: _______________________________________________________________________________________

(Printed name)

(Signature)

(Date)

Authorized Signature: ___________________________________________________________________________________________

(Printed name)

(Signature)

(Date)

Title: ________________________________________________________________________________________________ (The following information is to be defined and completed by the END USER’S plant safety engineer or other authorized party) Hazardous Area Classification: Class _________________________, Division ___________________ , Group______________ Specific Hazard/Material (please print): _______________________________________________________________________

Defining Individual: ________________________________________________________________________________________ (Printed name)

(Signature)

(Date)

Defining Authority (Title): ____________________________________________________________________________________

552

Please retain a copy of this completed form for your records. An ISO 9001 Registered Company © 2018 Rice Lake Weighing Systems 01/18 Prices and specifications subject to change without notice. Visit ricelake.com for current prices.

INTRINSICALLY SAFE

It is simply a digital weight indicator enclosed in a special case. The purpose of an explosion-proof indicator is not, as the name suggests, to protect the indicator. Instead, the case prevents any explosion WITHIN the case from causing subsequent fire or explosion in the surrounding atmosphere. For example, in a grain elevator application, combustible dusts (Class II hazardous atmosphere) may be present. A spark in a non-explosionproof indicator could ignite an elevatorwide explosion. However, with an explosion-proof indicator, the spark (or even an explosion) is contained within the case. The hazardous atmosphere cannot be ignited, and the elevator is protected. ADVANTAGES • Explosion containment • Requires low maintenance • No electronics • No moving parts

DISADVANTAGES • Cannot indicate failure of containment capability • Cost of protection per cubic foot increases with enclosure size • Promotes condensation • Cumbersome, limited access • Causes harmful heat buildup • Limited sizes • Bulky designs • Excessive weight

PURGE SYSTEM

INTRINSICALLY SAFE SYSTEM

Purged systems are ideal for hazardous environments and use positive pressure to prevent particles, gases and fibers from entering the controller enclosure. As an added safeguard, a differential pressure switch automatically cuts off power when the pressure falls below the acceptable level. Type X, Y and Z purging hardware is available that meets National Fire Protection Association (NFPA) article 496 guidelines.

Intrinsically safe load cells and safety barriers take the explosion proof principle a step further. Intrinsic safety ensures the indicator’s electrical wiring and components are, by design, incapable of releasing enough energy to ignite flammable or combustible atmospheric mixtures in their most easily ignitable concentrations. In short, an intrinsically safe device eliminates the conditions for an explosion, no matter what the circumstances.

The three configurations are as follows: Type X Pressurizing: Reduces the classification within the protected enclosure from Division 1 to Safe. Type Y Pressurizing: Reduces the classification within the protected enclosure from Division 1 to Division 2. Type Z Pressurizing: Reduces the classification within the protected enclosure from Division 2 to Safe. ADVANTAGES • Reduces heat buildup • Inhibits metal corrosion • Requires low maintenance • Increases equipment longevity • Allows fast access to equipment • Reduces moisture and dust buildup • Reduces classification within enclosure • Continuous system status indication • Protects enclosures up to 450 cubic feet • Allows use of any enclosure shape • Cost of protection per cubic foot decreases with enclosure size

DISADVANTAGES • Contains moving parts • Requires instrument air supply • Some systems contain electronics • Some systems require electrical power

ADVANTAGES • Limits energy to device • Requires low maintenance • No moving parts • Ideal for sensors

DISADVANTAGES • One barrier is required for each conductor • Project cost increases with number of conductors • Offers no protection against heat, moisture and dust • Requires protection or installation in nonclassified area • 24 VDC, 50 mA maximum power and signal strength limit

www.ricelake.com | Phone: 800-472-6703

EXPLOSION PROOF SYSTEM What is an explosion-proof indicator?

INDICATORS / CONTROLLERS

Explosive Environment Solutions

INTRINSICALLY SAFE

Hazardous Atmospheres (for reference only) INDICATORS / CONTROLLERS

Hazardous atmospheres are divided into three general classes and two divisions: CLASS I: Flammable gases or vapors CLASS II: Combustible dusts CLASS III: Ignitable fibers or flyings DIVISION 1: Hazard exists under normal conditions DIVISION 2: Hazardous material is handled, processed or stored. Hazard is not normally present, but may be released due to accident or equipment malfunction.

CLASS I:

Flammable gases or vapors CLASS I, GROUP A: (d) • Acetylene

CLASS I, GROUP B: (d)

www.ricelake.com | Phone: 800-472-6703

• Acrolein (inhibited) • Arsine • Outadiene • Ethylene oxide • Hydrogen • Manufactured gases containing more than 30% hydrogen by volume • Propylene oxide • Propylnitrate

CLASS I, GROUP C: (c, d) • Acetaldehyde • Allyl alcohol • N-butyraldehyde • Carbon monoxide • Crotonaldeghyde • Cyclopropane • Diethyl ether • Diethylamine • Epichlorohydrin • Ethylene • Ethylenimine • Ethyl mercaptan • Ethyl sulfide • Morpholine • 2-nitropropane • Tetrahydrofuran • Unsymmetrical dimethyl hydrazine • (UMDH 1, 1-dimethyl hydrazine)

CLASS I, GROUP D: (c, d) • Acetic acid • Acetone • Acrylonitrile • Ammonia • Benzene • Butane • 1-butanol (butyl alcohol) • 2-butanol (secondary butyl alcohol) • N-butyl acetate • Isobutyl acetate • Di-isobutylene • Ethane • Ethanol (ethyl alcohol) • Ethyl acetate • Ethyl acrylate (inhibited) • Ethylene diamine (anhydrous) • Ethylene dichloride • Ethylene glycol monomethyl ether • Gasoline • Heptanes • Hexanes • Isoprene • Isopropyl ether • Mesityl oxide • Methane (natural gas) • Methanol (methyl alcohol) • 3-methyl 1-butanol (isoamyl alcohol) • Methyl ethyl ketone • 2-methyl 1-propanol (isobutyl alcohol) • 2-methyl 2-propanol (teriary butyl alcohol) • Petroleum naptha • Pyridine • Octanes • Pentanes • 1-pentanol (amyl alcohol) • Propane • 1-propanol (propyl alcohol) • 2-propanol (isopropyl alcohol) • Propylene • Styrene • Toluene • Vinyl acetate • Vinyl chloride • Xylenes

CLASS II:

Combustible Dusts (c) CLASS II, GROUP E (c, d) • Atmospheres containing metal dust, including aluminum, magnesium, and their commercial alloys, as well as other metals of similarly hazardous characteristics with a resistivity of 100 ohms per centimeter.

CLASS II, GROUP F (c, d) • Atmospheres containing carbon black, charcoal, coal or coke dusts that have more than 8 percent total volatile material, or atmospheres containing these dusts sensitized by other materials so that they present an explosion hazard. They will also have a resistivity greater than 100 ohms per centimeter and equal to or less than 100 megohms per centimeter.

CLASS II, GROUP G (c, d) • Atmospheres containing flour, starch or grain as well as combustible plastics or chemical dusts having resistivity greater than 1 megohm per centimeter.

CLASS III:

Ignitable Fibers or Flyings (c, d) • Atmospheres containing parts of rayon, cotton and other textiles. Combustible fiber manufacturing and processing plants such as cotton gins, cottonseed mills, flax processing plants, clothing manufacturing plants, sawmills and other woodworking locations. • Easily ignitable fibers including rayon, cotton (including cotton linters and cotton wastes), sisal or henequen, istle, jute, hemp, tow, cocoa, oakum, baled waste kapok, Spanish moss, excelsior, sawdust, wood chips and other similar materials.

554 (d) Rice Lake Weighing Systems’ intrinsically safe systems may be used in these atmospheres. An ISO 9001 Registered Company © 2018 Rice Lake Weighing Systems 01/18 Prices and specifications subject to change without notice. Visit ricelake.com for current prices.

INDICATORS / CONTROLLERS www.ricelake.com | Phone: 800-472-6703

INTRINSICALLY SAFE

320IS

Intrinsically Safe Digital Weight Indicator

INDICATORS / CONTROLLERS

Specifications Load Cell Excitation: 3.0 VDC at 87.5 Ω 4.6 VDC at 700 Ω

Load Cell Current: 34 mA (4 x 350 Ω load cells) or (8 x 700 Ω load cells)

Load Cell Cabling: Four- and six-wire with remote sensing (recommended)

Analog Signal Input Range: 0.6 mV/V - 4.0 mV/V

Analog Signal Sensitivity: 0.2 µV/graduation minimum 1.5 µV/graduation recommended

Conversion Rate: 60 updates/second

Resolution: 10,000 displayed graduations (NTEP Certified), 100,000 expanded The maximum number of allowed graduations will vary by application

Display Increments: 1, 2, 5

Standard Features

www.ricelake.com | Phone: 800-472-6703

556

Display:

• LED display, 0.8 in (20 mm), six-digit, 16-segment • Stainless steel NEMA Type 4X/IP66 enclosure • T4 temperature rating • Front panel digital calibration • Automatic zero and span temperature compensation • Excitation for four 350 ohms or eight 700 ohms load cells • Gross/tare/net computation • Tilt stand • Duplex fiber optic interface • Power ON/OFF; battery save mode • I/O Module Option: two serial ports, two analog outputs, four digital inputs, 4 relay contact outputs • Factory Mutual (FM) entity approved for classes I, II, and III; Divisions 1 and 2; Groups A, B, C, D, E, F and G • FM Entity Approved for use in hazardous locations per Rice Lake Weighing Systems control drawing file number 72717.

Approvals

Six-digits, Light Emitting Diode (LED); 16-segment, 0.8 in (20 mm) digits

Decimal Point: Configurable with dead zeros

Unit Switching: Configurable for 2 units of measurement with front panel operation with conversion for tare and setpoint values

Front Panel Control Switches: Measurement Canada Approved

Rice Lake Weighing Systems warrants that all Rice Lake Weighing Systems intrinsically safe (IS) equipment and systems installed by a distributor or original equipment manufacturer (OEM) will operate per written specifications as confirmed by the distributor/OEM and accepted by Rice Lake Weighing Systems. All systems and components are warranted against defects in materials and workmanship for one year. All Rice Lake Weighing Systems intrinsically safe equipment carries a Factory Mutual approval and is documented on various control drawings. Each device is manufactured Rice Lake Weighing Systems factory authorized personnel. To preserve the warranty and Factory Mutual approval, all repairs or replacement of circuit boards or components housed within the enclosures must be performed by Rice Lake Weighing Systems factory authorized personnel. ®

Zero, gross/net, tare, print, units conv

Front Panel: Six-button flat membrane panel

Front Panel LED Annunciators: Center zero, gross, net, motion, lb, kg, oz, g

Motion Band: Configurable to ± 1 or ± 3 graduations, 1 second delay (or Off)

Power Input: 5.8 - 7.9 VDC,100 - 175 mA Maximum power consumption 0.25 watts

Operating Temperature: 14° F to 104° F (-10° C to 40° C) legal for trade

Rating/Material: Stainless steel NEMA Type 4X/IP66 enclosure

Optional Battery: Operating times: 4 x 350 Ω = 35-40 hrs 1 x 350 Ω =40-50 hrs 8 x 700 Ω = 35-40 hrs Charging Times: 10 hrs for dead battery, 14 hrs for initial charge

Weight: 6.1 lb (2.8 kg)

Warranty: One-year limited warranty

Approvals: NTEP CC 03-078 Class III/IIIL 10,000d UL/cUL Listed FM Entity Measurement Canada AM-5560

INTRINSICALLY SAFE

320IS

Part Number/Price

Part #

Description

91233

320IS intrinsically-safe digital weight indicator fivebutton keypad with battery pack and charger & tilt stand 320IS instriniscally-safe digital weight indicator fivebutton with A/C power supply 320IS indicator only

91234 177500

Price $1,827.00 $1,827.00

B A

$1,095.00

Options/Accessories Part #

Description

Price

174049 179142 179143 179144 179145 179146 72725 74001 74002

Power supply, IS-EPS-100-240 VAC DC extension cable 10 ft DC extension cable 25 ft DC extension cable 50 ft DC extension cable 75 ft DC extension cable 100 ft IS-6 V battery option with cable adapter Battery charger, 115 VAC Battery charger, 230 VAC Fuse, 1.25 A, 250 V TR5 time-lag 80869 (replacement part for the I/O module) 72726 Tilt stand (required for battery model) I/O module, stainless steel NEMA Type 4 enclosure, safe area option (requires 89239* fiber optic cable, AC power required) 83388 Timer relay kit includes din rail, timer relay for latching and mount 74612 Installation manual 78076 I/O module manual Hazardous Environment Cable 32817 EL147IS hazardous environment cable 72241 Hazardous environment 3 conductor 78026 Fiber optic, duplex cable 100 ft 78027 Fiber optic, duplex cable 200 ft

$845.00 $100.00 $125.00 $150.00 $200.00 $225.00 $545.00 $149.00 $535.00

Without battery

E C

INDICATORS / CONTROLLERS

Intrinsically Safe Digital Weight Indicator

$2.50 $57.00 $1,295.00

With optional battery and tilt stand

$370.00 $35.00 $30.00 $2.85/ft $2.25/ft $135.00 $270.00

Dimensions Without Battery A 8.56 in (217.4 mm) D B 6.00 in (152.4 mm) E C 9.50 in (241.3 mm) With Optional Battery and Tilt Stand G F 11.56 in (293.6 mm) Optional I/O Module 12.90 in x 11.63 in x 6.25 in (327.7 mm x 295.4 mm x 158.8 mm) Optional Power Supply 7.00 in x 5.13 in x 3.125 in (177.8 mm x 130.0 mm x 79.375 mm)

2.64 in (67.1 mm) 3.75 in (95.2 mm)

4.75 in (120.7 mm)

www.ricelake.com | Phone: 800-472-6703

* Includes relays I/O module required for anything besides basic weighing

INTRINSICALLY SAFE

320IS Plus

Intrinsically Safe Digital Weight Indicator

INDICATORS / CONTROLLERS

Specifications Load Cell Excitation: 3.0 VDC at 87.5 Ω 4.6 VDC at 700 Ω

Load Cell Current: 34 mA (4 x 350 Ω load cells) or (8 x 700 Ω load cells)

Load Cell Cabling: Four and six-wire with remote sensing (recommended)

Analog Signal Input Range: 0.6 mV/V - 4.0 mV/V

Analog Signal Sensitivity: 0.2 µV/graduation minimum 1.5 µV/graduation recommended

Conversion Rate: 60 updates/second

Resolution: 10,000 displayed graduations (NTEP Certified), 100,000 expanded The maximum number of allowed graduations will vary by application

Display Increments: 1, 2, 5

Display:

Standard Features

www.ricelake.com | Phone: 800-472-6703

558

• LED display, 0.8 in (20 mm), six-digit, 16-segment Approvals • Stainless steel NEMA Type 4X/IP66 enclosure • T4 temperature rating • Front panel digital calibration • Automatic zero and span temperature compensation • Excitation for four 350 ohms or eight 700 ohms load cells • Gross/tare/net computation • Tilt stand Measurement Canada • Numeric keypad Approved • Duplex fiber optic interface • Power ON/OFF; battery save mode • I/O module option: two serial ports, two analog outputs, four digital inputs, four relay contact outputs • Eight setpoint (requires I/O module) • Factory Mutual (FM entity approved for classes I, II, and III; Divisions 1 and 2; Groups A, B, C, D, E, F, and G) • Time & date (requires I/O module) • FM Entity Approved for use in hazardous locations per Rice Lake Weighing Systems control drawing file number 72717.

Rice Lake Weighing Systems warrants that all Rice Lake Weighing Systems intrinsically safe (IS) equipment and systems installed by a distributor or original equipment manufacturer (OEM) will operate per written specifications as confirmed by the distributor/OEM and accepted by Rice Lake Weighing Systems. All systems and components are warranted against defects in materials and workmanship or one year.All Rice Lake Weighing Systems intrinsically safe equipment carries a Factory Mutual approval and is documented on various control drawings. Each device is manufactured Rice Lake Weighing Systems factory authorized personnel. To preserve the warranty and Factory Mutual approval, all repairs or replacement of circuit boards or components housed within the enclosures must be performed by Rice Lake Weighing Systems factory authorized personnel. ®

Six-digits, light emitting diode (LED); 16-segment, 0.8 in (20 mm) digits

Decimal Point: Configurable with dead zeros

Unit Switching: Configurable for two units of measurement with front panel operation with conversion for tare and setpoint values

Front Panel Control Switches: Zero, Gross/Net, Tare, Print, Units Conv, Start, Stop, Accum, Tare Display

Front Panel: 24-button flat membrane panel

Front Panel LED Annunciators: Center Zero, Gross, Net, Motion, lb, kg, oz, g

Motion Band: Configurable to ± 1 or ± 3 graduations, 1 second delay (or Off)

Power Input: 5.8-7.9 VDC,100-175 mA Maximum power consumption 0.25 watts

Operating Temperature: 14° F to 104° F (-10° C to 40° C) legal

Rating/Material: Stainless steel NEMA Type 4X/IP66 enclosure

Optional Battery: Operating times: 4 x 350 Ω = 35-40 hrs. 1 x 350 Ω = 40-50 hrs. Charging times: 10 hrs for dead battery, 14 hrs for initial charge

Weight: 6.1 lb (2.8 kg)

Warranty: One-year limited warranty

Approvals: NTEP CC 03-078 Class III/IIIL 10,000d UL/cUL Listed FM Entity Measurement Canada AM-5560

CAUTION! The equipment contained within this Explosive Environment section requires greater attention to specification and installation guidelines. Improper specification, installation or service of these products can result in loss of equipment or serious injury. An ISO 9001 Registered Company © 2018 Rice Lake Weighing Systems 01/18 Prices and specifications subject to change without notice. Visit ricelake.com for current prices.

INTRINSICALLY SAFE

320IS Plus

Part Number/Price

Part #

Description

91235

320IS Plus intrinsically-safe digital weight indicator full keypad with battery pack and charger & tilt stand 320IS Plus intrinsically-safe digital weight indicator full keypad with A/C power supply 320IS Plus indicator only

91236 177501

Gross

Net

kg Count

B A

Options/Accessories Part #

Description

Without battery

174049 179142 179143 179144 179145 179146 72725 74001 74002 80869 72726

Power supply, IS-EPS-100-240 VAC with barrel connector DC extension cable 10 ft DC extension cable 25 ft DC extension cable 50 ft DC extension cable 75 ft DC extension cable 100 ft IS-6 V battery option with cable adapter Battery charger, 115 VAC Battery charger, 230 VAC Fuse, 1.25 A, 250 V TR5 time-lag (replacement part for the I/O module) Tilt stand (required for battery model) I/O Module, stainless steel NEMA Type 4 enclosure, safe area option (requires 89239 fiber optic cable, AC power required) 83388 Timer relay kit includes din rail, timer relay for latching and mount 85353 Installation manual 78076 I/O module manual Hazardous Environment Cable and Fiber Optic Cable 32817 EL147IS hazardous environment cable 72241 Hazardous environment 3 conductor 78026 Fiber optic, duplex cable 100 ft 78027 Fiber optic, duplex cable 200 ft

Gross Net

lb kg Count

INDICATORS / CONTROLLERS

Intrinsically Safe Digital Weight Indicator

With optional battery and tilt stand

Without Battery A 8.56 in (217.4 mm) D B 6.00 in (152.4 mm) E C 9.50 in (241.3 mm) With Optional Battery and Tilt Stand F 11.56 in (293.6 mm) G Optional I/O Module 12.90 in x 11.63 in x 6.25 in (327.7 mm x 295.4 mm x 158.8 mm) Optional Power Supply 7.00 in x 5.13 in x 3.125 in (177.8 mm x 130.0 mm x 79.375 mm)

2.64 in (67.1 mm) 3.75 in (95.2 mm)

4.75 in (120.7 mm)

www.ricelake.com | Phone: 800-472-6703

Dimensions

INTRINSICALLY SAFE

EL232 XPCD

Explosion Proof Remote Serial Display

INDICATORS / CONTROLLERS

Specifications Display: High-intensity, red LED, 0.8 in (20.3 mm) high digits

Input Voltage: 115 VAC, 60 Hz

Weight: Approximately 25 lb (11.3 kg)

NEC Classifications: Class I, Division 1, Groups C & D; Class II, Division 1, Groups E, F & G and Class III hazardous environments

Baud Rate: 1200, 2400, 4800 and 9600

Interfaces: 20 mA current loop and RS-232 please consult factory for model numbers and interface requirements.

Warranty: One-year limited warranty NOTE: Custom enclosures as requested. All explosion-proof devices are now built-to-order, so please coordinate purchase of these items with one of our application specialists.

Standard Features

• 20 mA current loop or RS-232 input • Compatible with most Rice Lake indicators • NEMA Type 4, 7CD, 9EFG enclosure

Part Number/Price Part #

Description

Est. Weight

20904

EL232 XPCD explosion proof remote serial display

25 lb

Dimensions

www.ricelake.com | Phone: 800-472-6703

A B C D

10.50 in (266.7 mm) 9.50 in (241.3 mm) 5.81 in (147.7 mm) 11.75 in (298.5 mm)

E F G H

10.50 in (266.7 mm) 7.50 in (190.5 mm) 11.75 in (298.5 mm) (glass diameter) 7/16 in (11 mm) dia holes

INTRINSICALLY SAFE

INDICATORS / CONTROLLERS

Intrinsic Safety Barriers

Standard Features • Each system features excitation, sense and signal barriers • Available in an enclosure for external mounting or in a chassis mount version • R Stahl or equivalent barriers that are approved by Factory Mutual (FM) ®

Specifications Part #30263:

+ Excitation 9001/01-158-390-101 Voltage Range:

± Signal 9002/77-093-040-001 Voltage Range:

+12 VDC

Internal Resistance: 55 Ω

Open Circuit Voltage: 15.7 VDC

Short Circuit Current: 390 mA

Classifications: FM approved, UL listed, CSA certified, SA, CE marked

± 6 VDC

Internal Resistance: 482 Ω

Open Circuit Voltage: 9.6 VDC

Short Circuit Current: 40.9 mA

Classifications: FM approved, UL listed, CSA-certified, SA, CE marked

Part #69491: - Excitation 9001/02-016-150-111 Voltage Range: ± 0.7 VDC

Internal Resistance: 12.8 Ω

Open Circuit Voltage: 1.64 VDC

Short Circuit Current: 127.4 mA

Classifications: FM approved, UL listed, CSA- certified, SA, CE marked

Part #31202:

Part #31542:

Part #69492:

± Excitation 9002/10-187-270-001 Voltage Range:

RS-232 9002/22-093-300-001 Voltage Range:

+ Sense 9001/01-168-020-101 Voltage Range:

± 6 VDC

Internal Resistance: 46 Ω

Open Circuit Voltage: 18.7 VDC

Short Circuit Current: 278.8 mA

Classifications: FM approved, UL listed, CSA- certified, SA, CE marked

± 6 VDC

Internal Resistance: 75.8 Ω

Open Circuit Voltage: 9.6 VDC

Short Circuit Current: 297.5 mA

Classifications: FM approved, UL listed, CSA- certified, SA, CE marked

Part #31540:

Part #30264:

+ Excitation 9001/01-083-442-10 Voltage Range:

± Sense 9002/10-187-020-001 Voltage Range:

+ 6 VDC

Internal Resistance: 48 Ω

Open Circuit Voltage: 8.4 VDC

Short Circuit Current: 442 mA

Classifications: FM approved, UL listed, CSA- certified, SA, CE marked

± 6 VDC

Internal Resistance: 482 Ω

Open Circuit Voltage: 18.7 VDC

Short Circuit Current: 22 mA

Classifications: FM approved, UL listed, CSA- certified, SA, CE marked

±12 VDC

Internal Resistance: 898 Ω

Open Circuit Voltage: 16.8 VDC

Short Circuit Current: 18.7 mA

Classifications: FM approved, UL listed, CSA- certified, SA, CE marked

Part #69493: - Sense 9001/02-016-015-101 Voltage Range:

www.ricelake.com | Phone: 800-472-6703

Part #31201:

+ 0.7 VDC

Internal Resistance: 127 Ω

Open Circuit Voltage: 1.64 VDC

Short Circuit Current: 13.7 mA

Classifications: FM approved, UL listed, CSA certified, SA, CE marked

561

INTRINSICALLY SAFE

Intrinsic Safety Barriers INDICATORS / CONTROLLERS

Part #70723: - Excitation 9001/00-083-442-101 Voltage Range: -6 VDC

Internal Resistance: 26 Ω

Open Circuit Voltage: -8.4 VDC

Short Circuit Current: 442 mA

Classifications: FM approved, UL listed, CSA certified, SA, CE marked

Part #70724: + Sense 9001/01-086-020-101 Voltage Range: + 6 VDC

Internal Resistance: 470 Ω

Open Circuit Voltage: 8.6 VDC

Short Circuit Current: 18.3 mA

Classifications: FM approved, UL listed, CSA certified, SA, CE marked

Part #72396:

Part #72521:

- Sense 9001/00-086-020-101 Voltage Range:

- Excitation 9001/01-199-390-101 Voltage Range:

+ 6 VDC

+16 VDC

Internal Resistance:

480 Ω

67 Ω

Open Circuit Voltage:

8.6 VDC

-19.9 VDC

Short Circuit Current:

18.3 mA

382.7 mA

Classifications:

FM approved, UL listed, CSA-certified, SA, CE marked

FM approved, CSA-certified, CE marked

Part #30266:

Part #30265:

- Excitation 9001/00-086-390-101 Voltage Range:

+ Excitation 9001/01-086-390-101 Voltage Range:

-0.6 VDC

+ 6 VDC

Internal Resistance:

30 Ω

Open Circuit Voltage:

8.6 VDC

Short Circuit Current:

377.6 mA

Classifications:

FM approved

Part Number/Price Part # Description

Est. Weight

www.ricelake.com | Phone: 800-472-6703

Barrier Kit #1 (For models with ± 5 Volt excitation) 31202 9002/10-187-270-001, ± Excitation barrier 30264 9002/10-187-020-001, ± Sense barrier 30263 9002/77-093-040-001, ± Signal barrier 109663 DIN rail mounted kit #1 (includes 31202, 30264, 30263) Barrier Kit #2: (For models with + 10 Volt excitation) 31201 9001/01-158-390-101, + Excitation barrier 69491 9001/02-016-150-111, - Excitation barrier 69492 9001/01-168-020-101, + Sense barrier 69493 9001/002-016-015-101, - Sense barrier 30263 9002/77-093-040-001, ± Signal barrier Barrier Kit #3: (For models with + 5 Volt excitation) 31540 9001/01-083-442-101, + Excitation barrier 69491 9001/02-016-150-11, - Excitation barrier 30263 9002/77-093-040-001, ± Signal barrier If sense leads are needed, use the following: 70724 9001/01-086-020-101, + Sense barrier 69493 9001/002-016-015-101, - Sense barrier Miscellaneous Barriers: 31201 9001/01-158-390-101, + Excitation barrier 69491 9001/02-016-150-111, - Excitation barrier 69492 9001/01-168-020-101, + Sense barrier 69493 9001/002-016-015-101, - Sense barrier 30263 9002/77-093-040-001, ± Signal barrier 31542 9002/77-093-300-001, RS-232 30266 9001/00-086-390-101, - Excitation barrier 30265 9001/01-086-390-101, + Excitation barrier 72521 9001-01-199-390-101, + Excitation barrier

1 lb 1 lb 1 lb 2 lb 1 lb 1 lb 1 lb 1 lb 1 lb 1 lb 1 lb 1 lb 1 lb 1 lb 1 lb 1 lb 1 lb 1 lb 1 lb 1 lb 1 lb 1 lb 1 lb

Options/Accessories: Part # Description

562

33531 35815 110424 22828 42219

DIN rail, 6 in length IS barrier installation manual FRP enclosure, up to 4 barriers (not included) Ground terminal block Barrier fuse (160 mA) An ISO 9001 Registered Company © 2018 Rice Lake Weighing Systems 01/18 Prices and specifications subject to change without notice. Visit ricelake.com for current prices.

PROTOCOL CARDS

Profibus DP Interface ®

720i /820i /920i ™

INDICATORS / CONTROLLERS

Standard Features • DP intelligent slave • Standard GSD file on disk • 128 selectable addresses • Auto baud rate up to 56 K • Registered with Profibus Trade Organization

Specifications 720i , 820i and 920i Power Requirements: ™

Bus adapter card with DeviceNet Module, DC power Supply voltage 6 VDC, supplied by 920i bus Typical current draw: 370 mA Power consumption: 2.22 W

Operating Temperature: 14° F to 104° F (-10° C to 40° C)

PN 68540

Warranty: One-year limited warranty

Part Number/Price Part #

Description

Est. Weight

68540

Profibus DP interface kit (internal), for use with 720i/820i/920i

3 lb

NOTE: Because Profibus DP option boards interface with programs written by non-Rice Lake Weighing Systems parti consult factory for latest technical updates before quoting.

Part #

Description

73754 69948

Additional GSD file Additional operating manual, (720i/820i/920i)

Remote I/O Interface 720i /820i /920i ™

Standard Features • 115 or 230 VAC operation • Discrete data transfer • Block data transfer

Specifications 720i, 820i and 920i Electrical: DC power Supply voltage: 6 VDC supplied by 720i, 820i and 920i bus Typical current draw: 137 mA Power consumption: 126 mA

Communications: Twin axial cable attachment to network at 57.6, 115.2 or 230.4 Kbps Update rate is dependent on the configured baud rate and the number of network modes

Operating Temperature: 14° F to 104° F (-10° C to 40° C)

Warranty: One-year limited warranty

www.ricelake.com | Phone: 800-472-6703

Options/Accessories

PN 68539

Part Number/Price (Limited Supply) Part #

Description

Est. Weight

68539

Allen-Bradley Remote I/O (internal), for use with 720i/820i/920i

3 lb

Options/Accessories Part #

Description

36254 69950

Additional operating manual, external version Additional operating manual, (720i/820i/920i)

NOTE: Because A-B Remote I/O option boards interface with programs written by non-Rice Lake Weighing Systems parties, please consult factory for latest technical updates before quoting.

563

PROTOCOL CARDS

DeviceNet Interface ™

720i /820i /920i ™

INDICATORS / CONTROLLERS

Standard Features • DeviceNet communication adapter • Compact size for internal installation in 720i, 820i and 920i indicators • Polled I/O connection • 125 Kbps, 250 Kbps, and 500 Kbps baud rate • Onboard LED diagnostics • Floating-point commands support decimal points ®

Specifications Power Requirements: Bus adapter card with DeviceNet Module, DC power Supply voltage 6 VDC, supplied by 720i, 820i and 920i bus Typical current draw: 270 mA Power consumption: 1.62 W The bus shall be supplied with 24 VDC ±10% on the fieldbus connector

PN 68541

Field Bus Interface: Pluggable screw connector

Part Number/Price

Operating Temperature:

Part #

Description

Est. Weight

68541

DeviceNet interface for use with 720i/820i/920i

3 lb

14° F to 104° F (-10° C to 40° C)

Diagnostic Led: Network status, module status

Options/Accessories Part #

Description

72779 69949

Additional EDS CD Additional operating manual

Communications: Twisted-pair cabling at 125, 250, or 500 Kbps Update rate is dependent on the configured baud rate and the number of network modes

Galvanic Isolation: Bus power is separated from other electronics via DC/DC converter. The send and receive signals are isolated via opto couplers.

Warranty: One-year limited warranty

ControlNet Interface ™

www.ricelake.com | Phone: 800-472-6703

820i /920i ®

Standard Features • Option for 820i and 920i • Polled I/O connection • Onboard LED diagnostics • Floating-point commands support decimal points

Specifications Power Requirements: Supply voltage 6 VDC, supplied by 820i and 920i bus

Field Bus Interface: BNC connector

Operating Temperature 14º F - 104º F (-10º C - 40º C) PN 103136

Diagnostic Leds: Tx/Rx data, good link, status, diagnostics

Power Consumption: 5 V regulated, 350 mA

Part Number/Price Part #

Description

Price

103136 ControlNet interface for use with 820i/920i Cables Consult factory for coaxial cable with cord grips

Diagnostic Leds: Link status, module status, network status, activity

Field Bus Interface: RJ-45

Options/Accessories

564

Part #

Description

104828 103122

Additional ControlNet CD Additional operating manual (820i/920i)

Price

PROTOCOL CARDS

EtherNet/IP Interface ®

720i /820i /920i ™

INDICATORS / CONTROLLERS

Standard Features • Industrial protocol for Allen-Bradley PLC • IP address settings configurable with onboard DIP switched, web page, or ARP or DHCP • Supports Rockwell Automation EtherNet/IP level • CE marked and UL conformance • Onboard diagnostic LED • Control Protocols • Supports the Modbus/TCP protocol and conforms to Modbus/TCP specification 1.0 ®

Specifications PN 87803

Physical Specifications: Length: 2.13 in (86 mm) Width: 3.38 in (54 mm) Height: 0.59 in (15 mm)

Power Requirements:

Part Number/Price

+5 VDC ± 5%, powered by indicator

Power Consumption: 350 mA on the 5 V power connection

Operating Temperature:

Part #

Description

87803

EtherNet/IP protocol card for 720i/820i/920i

Options/Accessories

14° F to 158° F (-10° C to 70° C)

Non-Operating Temperature: -13° F to 185° F (-25° C to 85° C)

Relative Humidity: 5 - 95% non-condensing

Part #

Description

72763 88537

Additional EtherNet/IP CD Additional operating manual

Diagnostic Leds: Link status, module status, network status, activity

Field Bus Interface: RJ- 45

Ethernet TCP/IP Interface 720i /820i /920i ™

• Supports any serial devices with 7 or 8 data requiring Ethernet access • Compact size for internal installation in 720i , 820i and 920i indicators • Can be used in other applications requiring 5-volt power supplied • 10/100 megabyte through RJ-45 connector or wireless option • HTTP, serial, telnet and SNMP management TM

Specifications Supported Protocols: ARP, UDP, TCP, Telnet, SNMP, ICMP, HTTP, BOOTP, DHCP and TFTP

Compatibility: Ethernet: Version 2.0/IEEE 802.3

Network Interface: Ethernet: RJ-45 (10/100 Base-T) or AUI (transformer and resistors/capacitors required)

Serial Interface: 1 serial interface

Data Rates: 300 bps to 115.2 Kbps

Serial Line Formats: Characters: 7 or 8 data bits Stop bits: 1 or 2 Parity: odd, even, none

Diagnostic LEDs: TX/RX data, Good link, Status, Diagnostics

Power Requirements: 5 V regulated 250 mA (Ethernet model)

Operating Temperature:

PN 71986

Part Number/Price Part #

Description

Est. Weight

71986

Ethernet TCP/IP interface for use with 720i/820i/920i Wireless Ethernet TCP/IP interface for use with 720i, 820i and 920i

3 lb

98057

www.ricelake.com | Phone: 800-472-6703

Standard Features

3 lb

Options/Accessories Part #

Description

72763 72117 Cables 72697 78860

Ethernet CD Additional operating manual RJ-45 to RJ-45, straight RJ-45 to RJ-45, cross over

41° F to 122° F (5° C to 50° C) An ISO 9001 Registered Company © 2018 Rice Lake Weighing Systems 01/18 Prices and specifications subject to change without notice. Visit ricelake.com for current prices.

565

PROTOCOL CARDS

Profibus DP Interface ®

880/1280

INDICATORS / CONTROLLERS

Standard Features • DP intelligent slave • Standard GSD file on disk • 100 selectable addresses • Up to 12 Mbps baud rate

Specifications Dimensions: 2.0 x 1.9 x 0.75 in (51.8 x 48 x 19.1 mm)

Power Requirements: 3.15-3.45 VDC

Operating Temperature: -40° F to 176° F (-40° C to 85° C)

Warranty: One-year limited warranty

Part Number/Price Part #

Description

Est. Weight

179163 Profibus DP interface kit, for use with 880 indicator 165795 Profibus DP interface kit for 1280 (single port)

3 lb 1 lb

Options/Accessories Part #

Description

157941 156784

Additional GSD file Additional operating manual

Profinet Interface ®

Standard Features

880/1280 www.ricelake.com | Phone: 800-472-6703

• Profinet communication adapter • Onboard diagnostic LEDs • 100 Mbps Baud Rate • Works as an I/O device on the ProfiNet network • PROFIenergy compliant

Specifications Dimensions: 2 x 1.9 x 0.75 in (51.8 x 48 x 19.1 mm)

Power Requirements: 3.15-3.45 VDC

Operating Temperature: -40° F to 176° F (-40° C to 85° C)

IP Address Range: Full IP address range DHCP

Configuration: GSDML file

Connector Type:

Part Number/Price Part #

Description

179160 Profinet interface kit for 880 (single port) 165794 Profinet interface kit for 1280 (single port)

RJ-45 (two with dual port version)

Est. Weight 1 lb 1 lb

Options/Accessories Part #

Description

157940 Additional Profinet CD 156781 Additional operating manual

PROTOCOL CARDS

DeviceNet Interface ™

880/1280

INDICATORS / CONTROLLERS

Specifications Dimensions: 2 x 1.9 x 0.75 in (151.8 x 48 x 19.1 mm)

Power Requirements: 3.15-3.45 VDC

Operating Temperature: -40° F to 176° F (-40° C to 85° C)

IP Address Range: MAC ID 0-63

Connector Type: RJ-45 (two with dual port version)

Standard Features • DeviceNet communication adapter • DIN rail mount for installation with 880 • 125 Kbps, 150 Kbps and 500 Kbps baud rate • Onboard LEDs

Part Number/Price Part #

Description

Est. Weight

179162 165793

DeviceNet interface kit for 880 DeviceNet interface kit for 1280 (single port)

1 lb 1 lb

Options/Accessories Part #

Description

157945 156783

Additional EDS CD Additional operating manual

MODBUS-TCP Interface ®

880/1280

• Active module with serial and parallel application interface • Complete Modbus-TCP server • Up to 8 bytes of I/O data in each direction • Transformer isloated interface 100 Mbps full duplex Ethernet • Onboard diagnostic LEDs • CE and UL compliant

Specifications Dimensions: 2.0 x 1.9 x 0.75 in (151.8 x 48 x 19.1 mm)

Power Requirements: 3.15-3.45 VDC

Operating Temperature: -40° F to 176° F (-40° C to 85° C)

Relative Humidity: 5-95% non-condensing

Connector Type: RJ-45 (two with dual port version)

Part Number/Price Part #

Description

Est. Weight

179161 165796

Modbus-TCP Interface kit for 880 (single port) Modbus-TCP Interface kit for 1280 (single port)

1 lb 1 lb

Options/Accessories Part #

Description

157939 156782

Additional Modbus-TCP CD Additional operating manual

www.ricelake.com | Phone: 800-472-6703

Standard Features

PROTOCOL CARDS

EtherNet/IP Interface ®

880/1280

INDICATORS / CONTROLLERS

Standard Features • Industrial protocol for AB PLC • IP address settings configurable with web page, ARP or DHCP • Supports Rockwell Automation EtherNet/IP • Diagnostic LEDs • CE marked and UL conformance

Specifications Dimensions: 2 x 1.9 x 0.75 in (151.8 x 48 x 19.1 mm)

Part Number/Price Part #

Description

Est. Weight

179159 165792

EtherNet/IP interface kit for 880 (single port) EtherNet/IP interface kit for 1280 (single port)

1 lb 1 lb

Description

157943 156861

Additional EtherNet/IP CD Additional operating manual

3.15-3.45 VDC

Operating Temperature: -40° F to 176° F (-40° C to 85° C)

Relative Humidity:

Options/Accessories Part #

Power Requirements:

5-95% non-condensing

Address Range: Full IP address range

EtherCAT Interface 880/1280

Standard Features

www.ricelake.com | Phone: 800-472-6703

• 2x RJ-45 EtherCAT 100 Mbit/s ports available simultaneously • Can be wired in several topologies including star, line, or tree. • Has built-in redundancy that compensates for potential breaks in wiring. • No network switches necessary, can be wired directly from device to device. • Includes self-terminating network. • CE, cUL and RoHS compliant • Diagnostic LEDs.

Specifications

Part Number/Price Part #

Description

Est. Weight

Dimensions:

179158 179533

EtherCAT interface kit for 880 EtherCAT interface kit for 1280

1 lb 1 lb

Power requirements:

Options/Accessories Part #

Description

179531 164394

Additional .XML CD Additional operating manual

2.04 x 1.97 x 0.86 in (52 x 50 x 22 mm) 3.3 VCD, +/- 0. 15 VDC

Operating temperature: -40 to +158 °F (-40 to +70 °C)

Relative Humidity: 5-95% non-condensing

Connector Type: RJ-45 (two available simultaneously)

NEW Model Available

RF TRANSCEIVERS

TranSend ™

Specifications Power: 5-6 VDC, 7-36 VDC 85-265 VAC

Excitation Voltage: Transmitter: +4.8 VDC, 16x 350Ω or 32x 700Ω load cells

Standard Antenna: 1/2 wave 2dBi, articulated

Frequency: Direct sequence spread spectrum at 2.4 GHz, 802.15.4 MSI-7000HD

100 ft or more

Digital I/O: Three coil relays available on select models and 7000HD units

Circuit Protection: RFI, EMI, ESD protection

Serial Port: Full duplex RS-232

Operating Temperature: -40° F to 185° F (-40° C to 85° C)

Enclosure: NEMA Type 4 (IP66), aluminum black powder coated (excludes wall cube model) 7000HD and 7001HD: IP68

Additional RF Options: Wi-Fi Bluetooth Cellular (consult) 802.15.4 FHSS

Warranty: One-year limited warranty

TranSend

Standard Features • Works with any basic digital weight indicator • Excitation to load cell(s) provided by the transmitter, not the indicator • Each transmitter/receiver set is individually paired • Auto-off mode - selectable for 15, 30, 45, 60 minutes or off • Auto-sleep mode - power down during non-use, power up with weight change or key press • Serial communication cable included with all transmitters

Additional HD Features • IP68 milled aluminum enclosure • 2nd radio modem available

Part Number/Price Part # Description Transmitters 5-6 VDC Power Input 160330 Single-channel transmitter, no relays, RF 802.15.4, 2.4 GHz 159207 Four-channel transmitter, no relays, RF 802.15.4, 2.4 GHz 161949 Four-channel transmitter, includes three coil relays, RF 802.15.4, 2.4 GHz 176644 Single-channel transmitter, no relays, Bluetooth 176638 Four-channel transmitter, no relays, Bluetooth 176641 Four-channel transmitter, includes three coil relays, Bluetooth 176655 Single-channel transmitter, no relays, Wi-Fi 176648 Four-channel transmitter, no relays, Wi-Fi 176652 Four-channel transmitter, includes three coil relays, Wi-Fi 7-36 VDC Power Input 160329 Single-channel transmitter, no relays, RF 802.15.4, 2.4 GHz 159470 Four-channel transmitter, no relays, RF 802.15.4, 2.4 GHz 161951 Four-channel transmitter, includes three coil relays, RF 802.15.4, 2.4 GHz 176645 Single-channel transmitter, no relays, Bluetooth 176639 Four-channel transmitter, no relays, Bluetooth 176642 Four-channel transmitter, includes three coil relays, Bluetooth 176656 Single-channel transmitter, no relays, Wi-Fi 176650 Four-channel transmitter, no relays, Wi-Fi 176653 Four-channel transmitter, includes three coil relays, Wi-Fi 85-265 VAC Power Input 160328 Single-channel transmitter, no relays, RF 802.15.4, 2.4 GHz 159469 Four-channel transmitter, no relays, RF 802.15.4, 2.4 GHz 161950 Four-channel transmitter, includes three coil relays, RF 802.15.4, 2.4 GHz 176643 Single-channel transmitter, no relays, Bluetooth 176637 Four-channel transmitter, no relays, Bluetooth 176640 Four-channel transmitter, includes three coil relays, Bluetooth 176654 Single-channel transmitter, no relays, Wi-Fi 176647 Four-channel transmitter, no relays, Wi-Fi 176651 Four-channel transmitter, includes three coil relays, Wi-Fi

Est. Weight 2 lb 2 lb 2 lb 2 lb 2 lb 2 lb 2 lb 2 lb 2 lb 2 lb 2 lb 2 lb 2 lb 2 lb 2 lb 2 lb 2 lb 2 lb 2 lb 2 lb 2 lb 2 lb 2 lb 2 lb 2 lb 2 lb 2 lb

www.ricelake.com | Phone: 800-472-6703

Effective Range:

INDICATORS / CONTROLLERS

Wireless Load Cell Interface System

569

RF TRANSCEIVERS

TranSend

™

Wireless Load Cell Interface System

INDICATORS / CONTROLLERS

Part Number/Price Part #

Description

Est. Weight

Receivers 5-6 VDC Power In put 160337 Receiver to provide a mV signal to a digital weight indicator, RF 802.15.4, 2.4 GHz Receiver to provide an analog output signal: 4-20 mA, 0-20 mA, 0-5 VDC, 0-10 VDC, ±5 VDC, ±10 VDC, 160334 RF 802.15.4, 2.4 GHz Receiver to provide an analog output signal: 4-20 mA, 0-20 mA, 0-5 VDC, 0-10 VDC, ±5 VDC, ±10 VDC, 160016 includes three coil relays, RF 802.15.4, 2.4 GHz 7-36 VDC Power Input 160336 Receiver to provide a mV signal to a digital weight indicator. RF 802.15.4, 2.4 GHz Receiver to provide an analog output signal: 4-20 mA, 0-20 mA, 0-5 VDC, 0-10 VDC, ±5 VDC, ±10 VDC, 160333 RF 802.15.4, 2.4 GHz Receiver to provide an analog output signal: 4-20 mA, 0-20 mA, 0-5 VDC, 0-10 VDC, ±5 VDC, ±10 VDC, 159476 includes three coil relays, RF 802.15.4, 2.4 GHz 85-265 VAC Power Input 160335 Receiver to provide a mV signal to a digital weight indicator, RF 802.15.4, 2.4 GHz Receiver to provide an analog output signal: 4-20 mA, 0-20 mA, 0-5 VDC, 0-10 VDC, ±5 VDC, ±10 VDC, 160332 \RF 802.15.4, 2.4 GHz Receiver to provide an analog output signal: 4-20 mA, 0-20 mA, 0-5 VDC, 0-10 VDC, ±5 VDC, ±10 VDC, 159475 includes three coil relays, RF 802.15.4, 2.4 GHz 7000HD: 177942 MSI-7000HD 4CH 85-265VAC, 3 Coil Relays, 802.15.4 177944 MSI-7000HD 4CH 7-36VDC, 3 Coil Relays, 802.15.4 177945 MSI-7000HD 4CH 9-36VDC Iso, 3 Coil Relays, 802.15.4 177950 MSI-7000HD 4CH 85-265VAC, 3 Coil Relays, Bluetooth 177952 MSI-7000HD 4CH 7-36VDC, 3 Coil Relays,Bluetooth 177953 MSI-7000HD 4CH 9-36VDC Iso, 3 Coil Relays,Bluetooth 177995 MSI-7000HD 4CH 85-265VAC, 3 Coil Relays, WiFi 177997 MSI-7000HD 4CH 7-36VDC, 3 Coil Relays, WiFi 177998 MSI-7000HD 4CH 9-36VDC Iso, 3 Coil Relays, WiFi 7001HD 178021 MSI-7001HD 2CH 85-265VAC, 802.15.4 178010 MSI-7001HD 2CH 5-6VDC, 802.15.4 178011 MSI-7001HD 2CH 7-36VDC, 802.15.4 178012 MSI-7001HD 2CH 9-36VDC Isolated, 802.15.4 178013 MSI-7001HD 2CH 85-265VAC, Bluetooth 178014 MSI-7001HD 2CH 5-6VDC, Bluetooth 178015 MSI-7001HD 2CH 7-36VDC, Bluetooth 178016 MSI-7001HD 2CH 9-36VDC Isolated, Bluetooth 178017 MSI-7001HD 2CH 85-265VAC, WiFi 178018 MSI-7001HD 2CH 5-6VDC, WiFi 178019 MSI-7001HD 2CH 7-36VDC, WiFi 178020 MSI-7001HD 2CH 9-36VDC Isolated, WiFi

2 lb 2 lb 2 lb 2 lb 2 lb 2 lb 2 lb 2 lb 2 lb

www.ricelake.com | Phone: 800-472-6703

Options/Accessories Part #

Description

162172 162173 162175 150964 150965 160109 162178 139309 139310 139311 139312 144345 139313 162177 162184

Charger, TranSend™ for 6 V SLA battery Battery, TranSend 6 V SLA Enclosure, TranSend for 6 V SLA battery RS-232 13 ft (4 m) serial cable with 9-Pin (female) connector RS-232 13 ft (4 m) serial cable with 9-Pin (male) connector AC adaptor, TranSend 6 V Antenna extension kit for enclosures Antenna kit, long range Omni with 3 m coax cable Antenna kit, corner reflector 9 dbi with 3 m coax cable Antenna kit, corner reflector 12 dbi with 3 m coax cable Antenna kit, Yagi 15 dbi with 3 m coax 30 m coaxial cable, for use with non-vehicle mount antenna kits Antenna kit, vehicle mount. 5 dbi with 5 m coaxial cable Cordset, TranSend, pre-wired for use with single channel transmitters or non-relay based receivers Load cell connector, TranSend, Field wireable, 4-6 mm straight. For use with single channel transmitters and all receivers.

RF TRANSCEIVERS

TranSend

™

Wireless Load Cell Interface System

Description

162185 162186 162187 143531 143533 143534 160110 150964 150965 145085 164865 165648 165651 145084 144400 168903 Consult Consult Consult Consult 184002 182244

Load cell connector, TranSend, Field wireable, 6-8 mm straight. For use with single channel transmitters and all receivers. Load cell connector, TranSend, Field wireable, 4-6 mm right angle. For use with single channel transmitters and all receivers. Load cell connector, TranSend, Field wireable, 6-8 mm right angle. For use with single channel transmitters and all receivers. Power cord, 6 V SLA battery charger EU Power cord, 6 V SLA battery charger, Australia Power cord, 6 V SLA Battery charger, UK 265 VAC to 6 VDC wall adapter US/UK/EU/AUS/China RS-232 serial cable, nine-pin female RS-232 serial cable, nine-pin male RS-232 serial cable, nine-pin unterminated Cable, 4 m, one-channel, mV/V output, LC input Cable, 5 m, one-channel, mV/V output, LC input Cable, 10 m, one-channel, mV/V output, LC input Cable, 2 m, one-channel, analog output Cable, 5 m, one-channel, analog output Cable, 10 m, one-channel, analog output Straight connector, analog output, field wire able, 4-6 mM OD Straight connector, analog output, field wire able, 6-8 mM OD Right angle connector, analog output, field wire able, 4-6 mM OD Right angle connector, analog output, field wire able, 6-8 mM OD 7000HD Half-plate mounted, FHSS, DC (battery) powered GoDex portable printer

www.ricelake.com | Phone: 800-472-6703

Part #

INDICATORS / CONTROLLERS

Options/Accessories

RF TRANSCEIVERS

SendIt Wireless Load Cell Interface System ™

INDICATORS / CONTROLLERS

Specifications Power: 5-6 VDC,

Excitation Voltage: Transmitter: +4.8 VDC, 16x 350 Ω or 32x 700 Ω load cells

Standard Antenna: 1/2 wave 2 dBi, articulated

Frequency: Direct sequence spread spectrum at 2.4 GHz, 802.15.4 license free

Effective Range: 100 ft or more

Circuit Protection: RFI, EMI, ESD protection

Serial Port: Full duplex RS-232

Operating Temperature: -40° F to 185° F (-40° C to 85° C)

Enclosure: NEMA Type 4 (IP66), aluminum black powder coated (excludes wall cube model)

Warranty:

Part Number/Price

One-year limited warranty

Part # Description Transmitters

Est. Weight

5-6 VDC Power Input transmitter, 5-6 VDC no relays. RF 802.15.4, 160331 Single-channel 2.4 GHz 5-6 VDC

2 lb

Receivers 5-6 VDC Power Input to provide a mV signal to a digital weight indicator. RF 160338 Receiver 802.15.4, 2.4 GHz 5-6 VDC Power Unit

2 lb

Paired Set

www.ricelake.com | Phone: 800-472-6703

5-6 VDC Power Input Includes one single-channel transmitter and one receiver, paired. In165312 cludes an RS-232 cable, a 2 m load cell cable and 2 m indicator cable/ 5 lb Power source sold seperately

Standard Features • Works with any basic digital weight indicator • Excitation to load cell(s) provided by the transmitter, not the indicator • Each transmitter/receiver set is individually paired and will not interfere with another set • Auto-off mode: Selectable for 15, 30, 45, 60 minutes or off • Auto-sleep mode: Power down during non-use, power up with weight change or key press • RS-232 cable included with transmitter and paired set

Options/Accessories Part #

Description

162172 162173 162175 145548 150964 150965 160109 162177

Charger, SendIt 6 V SLA battery Battery, SendIt 6 V SLA Enclosure, SendIt for 6 V SLA battery Cord set, 13 ft (4 m) RS-232 13 ft (4 m) serial cable with nine-pin (female) connector RS-232 13 ft (4 m) serial cable with nine-pin (male) connector AC adapter, SendIt 6V Cordset. Pre-wired for use with single channel transmitters or non-relay based receivers Load cell connector. Field wireable, 4-6 mm straight. For use with single channel transmitters Load cell connector. Field wireable, 6-8 mm straight. For use with single channel transmitters Load cell connector. Field wireable, 4-6 mm right angle. For use with single channel transmitters Load cell connector. Field wireable, 6-8 mm right angle. For use with single channel transmitters Antenna kit, remote standard antenna Antenna kit, long range Omni with 3 m coax Antenna kit, corner reflector 9 dbi with 3 m coax Antenna kit, corner reflector 12 dbi with 3 m coax Antenna kit, Yagi 15 dbi with 3 m coax

162184 162185 162186 162187 162178 139309 139310 139311 139312

RF TRANSCEIVERS

ConnexLink

™

Wireless Radio 900 MHZ Transceivers

INDICATORS / CONTROLLERS

Specifications Frequency Band: 902-928 MHz

Modulation: FHSS FSK

Server

Interface:

Client

Point-to-point

Standard: RS-232 (DB9 Male) ConnexLink PRO: RS485 (DB9 Female)

Serial Interface Data Rate: Up to 115200 Kbps

Output Power:

Client

5 mW-1000 mW variable

Input Power:

Client

Server

7 VDC-18 VDC

Client

Point-to-multipoint

Current Draw (at 12 VDC): 400 mA TXD, 40 mA RXD

Wireless Network

Power Supply: AC transformer via 6 ft cable (183 cm)

Electrical Requirements: Line voltage 100-120 V; frequency 50-60 Hz (240 V outside the US) Up to 32

Security: 1-byte system ID, DES

Sensitivity: -99 dB at full RF data rate

Range (line of sight): Up to 20 miles (32 km)

Temperature: -40° F to 176° F (-40º C to 80° C)

Humidity (non-condensing): 10% to 90%

Weight: <6 oz (<170 g)

Dimensions: 4.75 x 2.75 x 1.17 in (121 x 70 x 30 mm)

Antenna Connector: Reverse polarity SMA jack (female)

When operating multiple sets of ConnexLinks radios in range of each other, they must be set to separate channels so that multiple servers stay in sync with their paired units and so no data is transmitted on the same channel. By default the radios are set to channel 16, so set the remaining server(s) at least four channels apart to ensure no cross-communications occurs. Make sure the client radios match their respective servers with channel number and System ID number.“Sync to Channel” must be enabled on all servers that have a channel number greater than 16. No other configuration modifications are required for the clients. In order to enable “Sync to Channel,” user will be required to download the latest configuration software at: https://www. lairdtech.com/solutions/embedded-wireless/connexlink-setup-wizard. Once downloaded, launch the software and select “PC Settings.” In the Product field, select Connex4490. Also you must select the corresponding COM port on your computer and the baud rate of the 4490 (9600 if you buy paired units, 57600 if you buy a single unit).To expand the options available click “About,” then type “showframe,” then enter. Click “OK” and then check the “Show All Options” box. Click the configure tab to edit the settings for your radio.

Standard Features • Durable industrial-grade enclosure with mounting flanges • Transmits around corners and through walls • Reliable communications up to 115200 kbps • Supports point-to-point and point-to-multipoint applications

Part Number/Price Part #

Description

www.ricelake.com | Phone: 800-472-6703

Channels:

86134 ConnexLink RF device 900 MHz RF device server/client (requires minimum of 2) 105776 ConnexLink Pro 900 MHz 1W, wireless transceiver with large buffer 129662 Paired ConnexLink

Options/Accessories Part #

Description

78827 103979 119448 119449 110538 110539 22436 98084

Power supply, 115 VAC input/6 VDC output Antenna 1/2 Wave, 2 dbi, 7 in for 900 MHz radios Yagi antenna Cable, Yagi antenna 20 ft ConnexLink FRP enclosure with heater ConnexLink Pro enclosure with heater RS-232 nine-pin female to blunt end DC power cable option

573

RF TRANSCEIVERS

Industrial Broadband Wireless Ethernet INDICATORS / CONTROLLERS

Specifications Frequency Band (varies by country): 2.412 GHz to 2.462 GHz (FCC) 2.412 GHz to 2.472 GHz (ETSI) 5.150 GHz to 5.250 GHz (FCC/ETSI) 5.725 GHz to 5.850 GHz (FCC)

Wireless Standards: 802.11a, 802.11b, 802.11g and 802.11i

Transmit Power; Programmable (varies by country): 2.4 GHz: up to 100 mW (20 dBm) 5 GHz: up to 64 mW (18 dBm) Channel Data Rates (modulation): 802.11b, 11, 5.5, 2, 1 Mbps (DSSS, BPSK, QPSK, CCK) 802.11g: 54, 48, 36, 24, 18,12, 9, 6 Mbps (OFDM) 802.11a: 54, 48, 36, 24, 18, 9, 6 Mbps (OFDM)

Receiver Sensitivity (Typical): -90 dBm at 1 Mbps -85 dBm at 11 Mbps -82 dBm at 24 Mbps -75 dBm at 54 Mbps

Channels Selection (varies by country): 1 to 13 (802.11a)

Security:

Standard Features • Serial and Ethernet connectivity • Configures as 802.11 a/b/g access point, wireless bridge, wireless repeater and client • Secure WPA2/128 bit encryption • Dual band 2.4 GHz or 5 GHz bands • Robust design for extreme temperatures (-40˚ C to 75˚ C) high vibration/shock and hazardous locations (UL Class 1, Divsion 2 / ATEX Zone 2)*

WPA2 - 802.11i with 128 bit AES-CCM legacy WPA TKIP, WEP support MAC ID filter, admin password

Part Number/Price www.ricelake.com | Phone: 800-472-6703

Part #

Description

161936 161954 161955

Industrial hot spot, 802.11abg* Industrial hot spot in FRP enclosure* Paired radios for serial data tunneling*

*Special ordered power supplies and antennas required

Dimensions FRP Enclosure A

8.5 in (216 mm)

10.5 in (267 mm)

161954 Industrial Hot Spot

ACCESSORIES

QWERTY Style Keyboards and Aluminum Keypads

INDICATORS / CONTROLLERS

For Use With: • Any system using RS-232 communications • Kiosk systems • 920i with custom software • 720 , 820i control systems ™

Part Number/Price Part #

Description

99149 36914 38472

Waterproof 80-key flexible keyboard USB Vandal-proof cast aluminum keypad Keypad encoder

Visible Lights and Audible Alarms Part Number/Price Part #

Description

Visible Lights and Audible Alarms 22838 Buzzer, 80 dB, steady 22839 Buzzer, 80 dB, pulse 156106 Buzzer box, 115 VAC, FRP enclosure 43931 Strobe lights, red 43930 Strobe lights, amber 43929 Strobe lights, blue

Product may vary from photo (reference photo only)

Din Rail Transient Protector & Fuse Part #

Description

Din Rail Transient Protector and Fuse 62965 Terminal block 53895 Surge suppressor Surge Suppressor Terminal Block

Manual Pushbuttons/Pushbutton Switches • Key switches • Lighted pushbuttons • Pilot lights • Two- and three-position switches • Colored pushbuttons • Emergency stop mushroom switches • Custom legend plates

Part Number/Price Part #

Description

Price

Manual Pushbuttons/Pushbutton Switches Operator and contact block N/A combinations

www.ricelake.com | Phone: 800-472-6703

Part Number/Price

EL226 Transient Protection Board • Protects sensitive microprocessor-based equipment against spikes and short-duration surges while providing RFI/EMI protection • Consult factory for standard features

INDUSTRIAL CONTROL PRODUCTS

Tripp-Lite USB to Serial Converters Serial Adapters

INDICATORS / CONTROLLERS

Specifications Data Transfer Rate: More than 500 Kbps

LED: Data transfer/handshaking (orange)

Power Consumption: 450 mW

USB Specification: V1.1 compliant

Standard Features • Portable design—no AC power required • Simple plug-and-play setup • Supports data transfer rates of more than 500 Kbps • Hot swappable

Part Number/Price Part #

Description

Est. Weight

153603 22436

USB to serial converter Cable DB9F to blunt end, 6 ft

1 lb 1 lb

www.ricelake.com | Phone: 800-472-6703

DB-9 PIN Assignments: PIN 1 2 3 4 5

Assignment CD RXD TXD DTR GND

DB9 (Male) Connector

PIN 6 7 8 9

Assignment DSR RTS CTS RI

Type A USB Connector

INDUSTRIAL CONTROL PRODUCTS

437 Bridgesensor

Signal Conditioner

INDICATORS / CONTROLLERS

Specifications Output Current Span: 4 to 20 mA; 0 to 20 mA

Input for 16 mA Span: 3 mV to 62 mV

Zero Adjust: 12 mA

Amplifier: Cell sensitivity (10 volts excitation): 0.3 mV/V to 6.2 mV/V

Output: Current: 0 to 20 mA Bridge Excitation Supply: Adjustment range: 5 to 15 Volts

Power Requirements: Input Voltage: 10 to 36 Volts DC Input current with 150 mA B+ load: 0.17 A at 36 V to 0.7 A at 10 V Input current with one 350 Ω bridge: 0.1 A at 36 V to 0.35 A at 10 V

Operating Temperature Range: -13° F to 131° F (-25° C to 55° C) Epoxy potted plastic enclosure with exposed screw terminal connections

Weight: 2 lb (0.9 kg)

Warranty: One-year limited warranty

B 1

L K J

F O N

1 2 3 4 5

• Complete strain gauge bridge signal conditioner • 4-20 mA or 0-20 mA output • Output capable of driving 1000 ohms loop • Bridge balance with 68% tare offset capability • High gain amplifier; can accept live load signals as low as 3 mV and provide 16 mA output span • Sufficient excitation current for five load cells • Powered by 10 to 36 VDC unregulated • Rugged epoxy encapsulated design

Screw Screw Terminal Function Terminal Function 1

+DC Power 6

-DC Power

-Sense

4 5

-Excitation +Sense

9 10

Part #

Description

Est. Weight

46719

437 Bridgesensor, 4-20 mA/0-20 mA, 10-36 VDC

2 lb

Case Dimensions

CTS 206-5

Electrical Connections

Part Number/Price

Standard Features

A B C D E F G

G H

0.32 in (8 mm) TYP 0.375 in (10 mm) TYP Excitation Adjust Bridge Balance 1.0 in (25 mm) 2.0 in (51 mm) 3.25 in (83 mm)

H I J K L M N

3.75 in (95 mm) Gain Fine Offset Coarse Offset 0.25 in (6 mm) Thru 2.25 in (57 mm) 2.87 in (73 mm)

+Excitation Current Output Amplifier CMN -Input +Input

www.ricelake.com | Phone: 800-472-6703

Packaging:

INDUSTRIAL CONTROL PRODUCTS

463 Bridgesensor Signal Conditioner

INDICATORS / CONTROLLERS

Specifications Input for 10V Output: 5 mV to 50 mV

Tare Adjustment Range: Bridge balance: -3 mV to +25 mV Referred to input: Equals 80% F.S. of 3 mV/V to +25 mV/V

Zero Adjust: 0 or +2 Volts

Output Voltage Range: -3 to +10 Volts

Bridge Supply: Voltage adjustment range: 5 to 10 Volts

Load Current: 0 to 120 mA

Operating Temperature Range: -13° F to 131° F (-25° C to 55° C)

Packaging: Epoxy potted plastic enclosure with exposed screw terminal connections

Weight: 18 oz (510 g)

Warranty:

Standard Features

Electrical Connections

• Complete strain gauge bridge signal conditioner • Isolated 10 volt output • Bridge balance with 80% tare offset capability • Excitation supply capable of driving four load cells • AC powered • Rugged epoxy encapsulated design

Screw Screw Terminal Function Terminal Function 1 2 3 4 5

-Sense -Excitation +Sense +Excitation AC

6 7 8 9 10

One-year limited warranty

AC +Signal -Signal Output Common

Part Number/Price Description

Est. Weight

46720

463 Bridgesensor, 0-10 VDC, 115 VAC

2 lb

Case Dimensions 0.32 in (8 mm) TYP 0.375 in (10 mm) TYP 1.0 in (25 mm) 2.0 in (51 mm) 3.25 in (83 mm) 3.75 in (95 mm) Output Zero

H I J K L M N

Span (Gain) Fine Tare Coarse Tare 0.25 in (6 mm) Thru Excitation Adjust 2.25 in (57 mm) 2.87 in (73 mm)

TARE

SPAN (GAIN)

OUTPUT ZERO

ADJUST

H G

O N

1 2 3 4 5

SWB

K J I

1 2

SWA

D SWA A B

O N

1 2 3 4 5

C D

4 + IN

CTS 206-5

ISOLATION

A B C D E F G

O N

www.ricelake.com | Phone: 800-472-6703

Part #

INSTRUMENTATION AMPLIFIER

– IN 8

F SENSOR

OUTPUT

– EXCITATION 2

COMMON

– SENSE 1

+ SENSE

N M

BRIDGE EXCITATION

120 mA MAX.

SUPPLY 5V - 10V

+ EXICATION

578 O N

INDUSTRIAL CONTROL PRODUCTS

API 4058G

Load Cell Signal Conditioners

INDICATORS / CONTROLLERS

Specifications Input/Output Ranges: See table on next page. Other switch-selectable ranges possible. See calibration instructions for more complete information, or consult factory.

Input Impedance: 1 Megohm minimum

Output Capability: Voltage: ±10 VDC; ± 10 mA Current: 25 mA DC; 20 V compliance

Zero/Span Controls: Top-accessible, multi-turn Range: ±15% of span typical

Excitation: 10 VDC maximum at 115 mA nominal; switch-selectable, 0-10 VDC in 1 Volt increments; fine adjust; ±2.5% via multi-turn

Excitation Stability: ±0.1% per degree Celsius

Response Time: 70 mS standard API 4058G Bridgesensor

Common Mode Rejection: Operating Temperature Range: 14° F to 140° F (-10° C to 60° C)

Power: Standard: 115 VAC, ±10%, 50/60 Hz, 2.5 W max Optional: 230 VAC, ±10%, 50/60 Hz, 2.5 W max 12 VDC versions available; consult factory for availability

Approvals: Model API 4058G: UL listed; consult factory for numbers

Weight: Approximately 2 lb (0.9 kg)

Dimensions: (W x H x D) 1.75 x 2.75 x 2.38 in (not including socket)

Warranty: One-year limited warranty

Standard Features • User-selectable input/output ranges and excitation voltages • Convenient setup via rotary and slide switches • Excitation voltage at 115 mA (10 V) drives four 350-ohm load cells • LED input/output signal indicators • Selectable voltage or current outputs • Functional test pushbutton

Part Number/Price Part #

Description

Est. Weight

22778

API 4058G Bridgesensor

2 lb

API 4058G Input/Output Ranges Input Spans

Outputs Voltage

0-5 mV 0-100 mV 0-10 mV 0-200 mV 0-20 mV 0-250 mV 0-25 mV 0-300 mV 0-30 mV 0-400 mV 0-40 mV 0-1000 mV 0-50 mV 0-1200 mV

0-1 V 0-8 V 0-2 V 2-10 V 0-4 V 0-10 V

Current 0-2 mA 0-10 mA 2-10 mA

0-5 V

0-16 mA

1-5 V

4-20 mA

±5 V

0-20 mA

±10 V

www.ricelake.com | Phone: 800-472-6703

Better than 0.02% of span per degree Celsius Better than .02% of span per degree Celsius

INDUSTRIAL CONTROL PRODUCTS

441/442 Bridgesensors Load Cell Signal Conditioners

INDICATORS / CONTROLLERS

Specifications Input/Output Ranges: See table on this page. Other switch-selectable ranges possible.

Input Impedance: 200K ohm typical

Output Capability: Voltage: ±10 VDC; at ± 10 mA Current: 25 mA DC; 20 V compliance

Zero/Span Controls: Top-accessible, multi-turn, non-interactive Range: ±15% of span typical

Excitation: Switch-selectable, 0-10 VDC in 1 volt increments Fine adjust: ±5% via multi-turn potentiometer

Excitation Current Capability: 120 mA DC at 10 VDC excitation; drives up to four 350-ohm load cells at 10 VDC

Excitation Stability: ± 0.01% per degree Celsius

Response Time: 70 mS standard; faster responses available

441/442 Bridgesensor

Sense Lead Compensation:

Standard Features

Better than 0.01% per 1 ohm change in leadwire resistance

• Input/output ranges and excitation voltage are selectable by easy-access rotary switches • Non-interactive zero and span control • Offset switch allows cancelling or taring of non-zero deadweights • Excitation voltage of 115 mA (10 V) drives up to four 350-ohm bridges • Input/output LoopTracker LEDs show input/output status • Functional test push-button with fixed level output to facilitate setup and troubleshooting • Full isolation (input/output power) eliminates the effects of ground loops and noise

Leadwire Resistance:

Part Number/Price

Power:

™

www.ricelake.com | Phone: 800-472-6703

Part #

Description

Est. Weight

38902 38904

441 Bridgesensor, 115 VAC 442 Bridgesensor, 9-30 VDC

2 lb 2 lb

441/442 Input/Output Ranges Input Spans 0-5 mV0 50 mV 0-10 mV0 100 mV 0-20 mV0 200 mV 0-25 mV0 250 mV 0-30 mV0 300 mV 0-40 mV0 400 mV

10 ohm max for 10 VDC excitation/350-ohm bridge

Common Mode Rejection: 100 dB minimum

Isolation: 2,000 V RMS minimum

Operating Temperature Range: 14° F to 140° F (-10° C to 60° C) 441: 115 VAC, ±10%, 50/60 Hz, 2.5 W max 441 Optional: 230 VAC, ±10%, 50/60 Hz, 2.5 W max 442: 9-30 VDC at 200 mA typical

Dimensions: (W x H x D) 1.75 x 2.75 x 2.38 in (not including socket)

Warranty:

Voltage Outputs

Current

0-1 V

0-20 mA

0-5 V

4-20 mA

Lifetime

1-5 V 0-10 V ±5 V ±10 V

INDUSTRIAL CONTROL PRODUCTS

Amphenol RJF 544 ®

Harsh Environment Ethernet Connection System

INDICATORS / CONTROLLERS

Specifications Data Transmission: 10Base-T, 100Base-TX and 1000Base-T networks Category 5e per TIA/EIA 568B and ClassD per ISO/ IEC 11801

Mechanical: Quick push/pull coupling RJ-45 cordset retention in the plug: 100N in the axis Mating cycles: 500 min

Environmental Protection: Sealing: IP67 Salt spray > 1000h Fire retardant/low smoke: UL94 V0 and NFF 16 16102, DIN 5510-2 Vibrations: 10-500 Hz, 10 g, 3 axes: No discontinuity > 10 nanos Thermal shock: 5 cycles at -40° C / +100° C

Operating Temperature: -40° F to 185° F (-40° C to 85° C)

Applications: Telecom equipment, video control, robotics, industrial process control, CNC machines, motion control, tele-maintenance

Standard Features

Part Number/Price Part #

Description

87326 87285 87286 87287 87288 87289

RJF 544 kit Square flange female connector Dust cap for harsh environment receptacles Gasket for harsh environment receptacles Ethernet plug Dust cap for harsh environment plugs

www.ricelake.com | Phone: 800-472-6703

• Allows an Ethernet Class D/Category 5e connection for 10Base-T, 100Base-TX, or 1000Base-T networks in harsh environments • Sealed against fluids and dusts (IP67) • Shock, vibration and traction resistant • No cabling operation in the field • No tools required • Improved EMI protection • Uses a standard RJ-45 cordset in protective composite plug to protect from shocks, dust and fluids • In-field cabling and grounding not necessary

INDUSTRIAL CONTROL PRODUCTS

AbleCable

RS 232/USB Serial Smart Cable Direct, Keyboard Input Direct

INDICATORS / CONTROLLERS

Specifications Baud Rate: 9600

Data Bits: 8

Parity: None

Color: Black

Cable Length: 74 in (1880 mm)

Bluetooth Cable Length: 16 in (406 mm)

Power: USB power, no external power supply

Host: PC and MAC compliant Connection: DB9 male connector, Pin 2 RX, Pin 3 TX and Pin 5 Ground USBA connector

Standard Features • Converts serial data such as barcode reader or scale into keyboard input to software program • Works with PC and MAC • Requires no driver installation (identifies itself as additional HID keyboard) • Cable draws power from USB port (no external power supply needed) • Test cable to be connected with adapter scale cable or connector • Bluetooth version allows Bluetooth connection to devices like iPad, Playbook, Android tablets and smart cell phones

Part Number/Price www.ricelake.com | Phone: 800-472-6703

Part #

Description

119919 132452

RS-232/USB serial cable RS-232/USB serial cable plus Bluetooth

Est. Weight 1 lb 1 lb

Options/Accessories Part #

Description

119064 22436 50749 130789

Slimline null modem, gender changer DB9 female to female Blunt-end to DB9 female, straight cable DB9 female to DB9 female Null model DB9 adapter female to male

INDUSTRIAL CONTROL PRODUCTS

go-between

Data Capture and Storage

INDICATORS / CONTROLLERS

Specifications Baud Rate: 9600

Data Bits: 8

Parity: None

Power: Requires 5 VDC

Customer Supplied: Power and USB flash drive

Industrial Enclosure Option: 7.5 x 7.5 x 4.5 in (19 x 19 x 12 cm) Latch for lock

Warranty: One-year limited warranty

Standard Features • Onboard LED for testing data transmission • Captures data and stores it on a USB flash drive up to 8 GB (not included) • Transfer data to your PC using the USB flash drive

Part #

Description

153265 153266 153267

go-between board go-between industrial enclosure go-between desk enclosure

158778

go-between desk enclosure, EU power supply

Options and Accessories Part #

Description

154797 125077 170935

Adapter, power 5 VDC 2A 90-264 VAC, U.S. plug, UL/cUL USB flash drive, 1 GB Overlay, desk

Text file examples (actual text will be dependent on transmitted file) 02:50PM 11/13/2012 GROSS 58 lb 02:50PM 11/13/2012 GROSS 68 lb

www.ricelake.com | Phone: 800-472-6703

Part Number/Price