Inuyasha Kikyo Miko Costume Tutorial
Uniform cloth is recommended below to make the Inuyasha Kikyo Miko cosplay costume. Thicker than pure cotton, it’s frequently used on uniforms. It has a fine texture after being ironed and will never wr inkle if being well saved.
Besides uniform cloth, some accessories like the red st rips on the cuffs, red strings in front of the chest and ela stic band are also needed. Red strips can be made from r ed ribbons. Red cords can make strings. It’s better to ma ke the elastic band 2CM wide and 0.5 meters long (it ca n be bought from the market).
When it comes to making a costume, the most important step should be to understand the structure of a suit. Kikyo’s jacket is compsed by five large pieces of fabric and a long strip of cloth. Two pieces are used on sleeves. Another two pieces are used on the front. And the last one is used on the back. The long strip of cloth is used to make the edge on the fornt part of the costume. Below photos show you detailed shapes. Pay close attention to this: shapes on two sleeves are completely the same. Thus, only one is shown below. Shapes on the left and right parts on the front of suit are adverse. A length of 2.5 meters is good.
Four pieces of same fabrics and a long strip of cloth constitute the trousers. A trouser leg is composed of two pieces of fabrics. The long strip of cloth is used to make the elastic band. Below photo shows you a detailed shape. Only one fabric piece is shown below as all four look the same.
How to make sleeves?
First, double up the sleeves.
Sew up colored places. After being sewn up, it s hould look like this.
ď‚—
Sew the red strips on the cuff. Exposed cuffs should be rolled t wice and then sewn.
ď‚—
How to sew the main body of the costume? Parts with the same colors are joint places.
ď‚—
After sewing up, it should look like this. Then, just as the photo sho ws, let’s make the sleeves. Only one side is shown. The same method is used to make another side.
ď‚—
After sewing up, it should look like this.
Sew up the long red strip. Roll the bottom of the suit twice. Then, the suit is finished.
How to make the trousers? First, get two pieces of fabrics and sew up edges on two sides. Roll the hemline twice. Another two pieces are made by the same method. Finally, as this picture shows, sew two trouser legs together.
How to make the sash? Fold and sew it up. Do not sew it up completely on the top side. Turn it over and sew it up. Strings on the front of the chest can be tailored directly according to the required length.
Thank You! Website:
www.miccostumes.com/bog
Join us on:
www.facebook.com/miccostumes www.twitter.com/miccostumes
Mail:
sales@miccostumes.com