Technology
3. INteC sYsteM aDaPter The INTEC System can be set up by taking the heel outsole out. Unscrew the existing outsole and screw back the INTEC System adapter.
1. waLK MeChaNIsM Forward Lean
Freeride mode: 2 to 3 Walking mode: 1 to 5
4. MICro aDJUstaBLe BUCKLes The adapted closing system of the entire Track line provides force transmission when closing the hardboot and finer control of the closing force by the microadjustability of the buckles. Just spin the buckles to adjust them.
5. aNKLe CaBLe 5-STEP FORWARD LEAN MECHANISM This mechanism provides the maximum of comfort and adjustment possibilities. Five forward lean positions are easily adjustable, additionally there is a walk mode. See the diagrams below:
TRACK 700 Two cable sizes available: long or short. Unscrew the bottom of the cable and replace it if needed.
TRACK 225/325, FREE 69 Unscrew the bottom of the cable and adjust the cable length. Three positions available.
STEP 1 Unlock the system by pulling down the mechanism.
STEP 2 Now the top part of the shell moves independently from the lower part. You are now in walk mode.
STEP 3 Just before riding, adjust your forward lean angle by choosing one position among the five available. Lock it by lifting up the mechanism.
6. PowerstraP With the help of the powerstrap, the top support of your boots is enhanced so that the calf and shin areas receive optimal support. Available in size M and L.
2. sCreweD LateraL CaNtINg
TRACK 700 With the help of the screwed lateral canting, you can adjust the lateral angle of the top part of the shell. Unscrew the internal canting and choose one of the two positions.
%
$ ! TRACK 425 PRO/425/ TRACK 325/225 With the help of the screwed lateral canting, you can adjust the lateral angle of the top part of the shell. Unscrew both cantings and choose the angle wanted.
# "